Trabajos document specialist en HitchinCrear alertas

Join a specialist Materials team supporting the development of products for a leading UK defence organisation. Working within Mechanical Engineering, you'll carry out laboratory testing, analysis, and material investigations to help ensure products meet strict technical, reliability, and cost requirements. You'll collaborate with UK and French teams, use a range of advanced test facilities, and provide technical support on materials, manufacturing processes, and product performance across the business.Key Responsibilities: This role is critical to ensuring products meet strict technical, reliability, quality, and compliance standards. Working within a specialist materials laboratory, you will support testing, failure investigations, material selection, supplier assessment, and regulatory compliance across a wide range of defence programmes. \n\n • Conduct testing, inspection, and characterisation of metallic and non-metallic materials.\n, • Analyse material properties to support product design, manufacturing, and quality assurance.\n, • Investigate material failures and support forensic engineering activities.\n, • Produce technical reports and interpret engineering drawings and specifications.\n, • Assess new and emerging materials technologies and manufacturing processes.\n, • Support REACH, RoHS, environmental, and regulatory compliance requirements.\n, • Provide technical guidance on hazardous materials, obsolescence, and material selection.\n, • Review supplier and subcontractor processes, manufactured parts, and quality documentation.\n, • Use laboratory equipment including mechanical testing, microscopy, and analytical instruments.\n, • Support laboratory quality and safety activities, including COSHH assessments, SOPs, and continuous improvement initiatives.\n\n What do you need?: \n\n • Practical Laboratory experience - hands on experience managing daily laboratory operations, including sample testing, logging, preparation and disposal.\n, • Experience in the Aerospace or Defence Industry advantageous but not strictly required.\n, • Assessment of materials and components to established international standards including DEF STANs.\n, • Experience performing routine calibration, troubleshooting and maintenance on lab equipment.\n, • Experience supporting the selection, procurement and manufacture of engineering parts or components.\n, • Familiarity working within a certified quality management team.\n, • Proficiency in lab and data analytical software (Microsoft Excel, Matlab etc).\n, • Strict adherence to lab safety protocols including proper handling of hazardous chemicals, SDS management and wearing of appropriate PPE.\n, • Ability to accurately document test procedures, analyse raw data and write clear concise technical reports.\n\n What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application.Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air.This role is based at our client's headquarters in Stevenage, a key location for missile operations. The site offers excellent transportation links, an onsite gym, and a coffee shop. \n Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Materials Laboratory Technician \n 6 month contract \n Based in Stevenage \n Offering £33.56ph Inside IR35 \n \n Do you have hands-on practical laboratory experience? \n Do you have proficiency in lab and data analytical software such as Excel, MATLAB, etc.? \n Do you want to work with an industry-leading company? \n \n If your answers are yes to these, then this could be the role for you!As the Materials Laboratory Technician, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! \n \n You will be involved in: \n\n • Wide-ranging testing and assessment of materials including metallic materials (aluminium, steels, titanium) and non-metallic materials including composites, polymers, paints, adhesives, and related processes\n, • Preparation of test reports, interpretation of Engineering drawings and specifications and use of other IT systems such as Word, Excel, and Access\n, • Supporting all aspects of the materials lab with routine testing, inspection, and characterisation, failure investigations, material selection, support to the supply chain, first article inspection report reviews, and material relifing\n, • Support generating or assessment of compliance data such as REACh, RoHS, or environmental aspects of engineering designs\n, • Support investigation and resolution of obsolescence due to supply chain, legislation, or other factors\n, • Support lab health and safety activities (E.g. COSHH & Risk Assessments) and quality activities (E.g. SOP writing)\n\n \n Your skillset may include: \n\n • Practical Laboratory experience - hands on experience managing daily laboratory operations, including sample testing, logging, preparation, and disposal\n, • Experience in the Aerospace or Defence Industry is advantageous\n, • Assessment of materials and components to established international standards including DEF STANs\n, • Experience performing routine calibration, troubleshooting, and maintenance on lab equipment\n, • Experience supporting the selection, procurement, and manufacture of engineering parts or components\n, • Familiarity working within a certified quality management team\n, • Proficiency in lab and data analytical software (Microsoft Excel, MATLAB, etc.)\n, • Strict adherence to lab safety protocols including proper handling of hazardous chemicals, SDS management, and wearing of appropriate PPE\n, • Ability to accurately document test procedures, analyse raw data, and write clear concise technical reports\n, • Familiarity with general lab equipment and any experience of XRF, SEM, EDX, OES, FTIR, paint inspection equipment, and mechanical testing\n\n \n If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! \n \n \n \n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

About the Job: \n \n As a specialist in electronics and software for the past 20 years, in-tech, an Infosys Company is a dynamic, fast-growing engineering company headquartered in Munich, Germany employing around 2350 employees globally across 20 project locations in 8 countries. \n \n in-tech develops innovative engineering solutions for the automotive, rail, aerospace, defence, and industrial sectors. \n \n \n We are looking for an experienced Windchill Developer to join our PLM team, responsible for the configuration, customization, integration, and support of PTC Windchill solutions. The role involves close collaboration with cross-functional teams (business, IT, engineering, manufacturing) to ensure PLM capabilities effectively support product lifecycle processes and business needs. \n \n Responsibilities: \n\n • Configure and customize Windchill PDM Link modules (Change, Document, BOM Management, etc.).\n, • Design, develop, and maintain Windchill workflows, lifecycle templates, and business rules.\n, • Implement customizations using Java, JSP, XML, and Windchill APIs following best practices.\n, • Integrate Windchill with ERP and other enterprise systems using Info*Engine and web services.\n, • Ensure robust and reliable data exchange, synchronization, and integrity between Windchill and external systems.\n, • Troubleshoot and resolve issues related to Windchill performance, scalability, access, and data integrity.\n, • Provide ongoing application support, maintenance, and assist with upgrades, patches, and environment changes.\n, • Collaborate with business analysts, engineering, manufacturing, and IT teams to gather and refine PLM requirements.\n, • Translate business requirements into effective Windchill configurations, customizations, and workflows.\n, • Advise on PLM best practices, participate in design reviews, solution validation, and user acceptance testing.\n\n \n Requirements: \n\n • Minimum 7+ years of experience in PTC Windchill development and support.\n, • Strong knowledge of Windchill PDM Link modules, architecture, and deployment models.\n, • Hands-on experience with Windchill BRF and Info*Engine for integrations and automation.\n, • Solid understanding of PLM concepts and product lifecycle processes (design, change, release, manufacturing).\n, • Experience working in engineering/manufacturing or complex enterprise environments.\n, • Exposure to Agile/Scrum delivery environments and collaboration in cross-functional teams.\n, • Familiarity with DevOps practices and CI/CD tools (e.g., Git/SVN, build/deployment, automated testing).\n, • Bachelor’s degree in engineering, Computer Science, or a related field.\n, • Must be a UK National, preferably with prior SC Clearance or eligibility to obtain SC.\n, • Able to commute to, or regularly travel to, Stevenage office/customer site as required.\n\n \n \n Important Note:- Candidate must be a UK National due to the nature of the customer environment and associated security requirements. \n \n \n If you are interested, please share your CV to sharonsantosh.ninan@infosys.com OR you can attach it here.

Operational Due Diligence Analyst Stevenage Contract - 6 Months (3 Days a week onsite) Salary £27.38 per hour Umbrella ARM has an exciting opportunity for a Operational Due Diligence Analyst to join a fast paced team at a Global Defence Company. The Role: All Non procurement Vendor Due diligence - Investigating vendors on third party tools, proposing an assessment, validating with compliance On Boarding processing Supplier data management Stakeholder management - Finance, compliance, procurement, rest of business Requirements: Experienced in managing supplier onboarding processes, including Know Your Customer (KYC) checks, due diligence, documentation review, and compliance with organisational and regulatory requirements. Strong understanding of defence and aerospace industry regulations, standards, and compliance requirements, ensuring suppliers and business activities meet applicable legal and contractual obligations. Knowledge of ISO 37001 Anti-Bribery Management Systems, supporting ethical business practices, anti-corruption controls, supplier due diligence, and compliance with corporate governance standards. Understanding of ISO 9001 Quality Management Systems, with experience supporting quality processes, continuous improvement initiatives, and compliance with quality assurance requirements. Highly proficient in Microsoft Excel, Word, and PowerPoint, including advanced data analysis, reporting, document preparation, presentations, and process tracking. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Materials Laboratory Technician 6 month contract Based in Stevenage Offering £33.56ph Inside IR35 Do you have hands-on practical laboratory experience? Do you have proficiency in lab and data analytical software such as Excel, MATLAB, etc.? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Materials Laboratory Technician, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! You will be involved in: Wide-ranging testing and assessment of materials including metallic materials (aluminium, steels, titanium) and non-metallic materials including composites, polymers, paints, adhesives, and related processes Preparation of test reports, interpretation of Engineering drawings and specifications and use of other IT systems such as Word, Excel, and Access Supporting all aspects of the materials lab with routine testing, inspection, and characterisation, failure investigations, material selection, support to the supply chain, first article inspection report reviews, and material relifing Support generating or assessment of compliance data such as REACh, RoHS, or environmental aspects of engineering designs Support investigation and resolution of obsolescence due to supply chain, legislation, or other factors Support lab health and safety activities (E.g. COSHH & Risk Assessments) and quality activities (E.g. SOP writing) Your skillset may include: Practical Laboratory experience - hands on experience managing daily laboratory operations, including sample testing, logging, preparation, and disposal Experience in the Aerospace or Defence Industry is advantageous Assessment of materials and components to established international standards including DEF STANs Experience performing routine calibration, troubleshooting, and maintenance on lab equipment Experience supporting the selection, procurement, and manufacture of engineering parts or components Familiarity working within a certified quality management team Proficiency in lab and data analytical software (Microsoft Excel, MATLAB, etc.) Strict adherence to lab safety protocols including proper handling of hazardous chemicals, SDS management, and wearing of appropriate PPE Ability to accurately document test procedures, analyse raw data, and write clear concise technical reports Familiarity with general lab equipment and any experience of XRF, SEM, EDX, OES, FTIR, paint inspection equipment, and mechanical testing If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

MATERIALS AND PROCESS LABORATORY TECHNICIAN - 3682-1 Initial 6-month contract (likely to be extended) Stevenage - 4 days onsite per week £33.56ph, UMB inside IR35 Please note, SC level Security Clearance must be in place prior to starting this position. Overview of department: Understanding the technology of Materials and their related use and manufacturing processes is a key part of ensuring that our products meet our demanding technical, cost and reliability requirements. The Material team consists of a federated UK/Fr integrated team based in Mechanical Engineering, operating with a common process set and links to the other materials teams across the business. We have a wide range of test facilities and specialist knowledge within materials used across the business. The Materials group can provide expertise, support and advice, including details of the laboratory facilities and contacts at our sites across the UK and France. We achieve this by: Technical Guidance and Approval in the Selection, characterisation and Use of Materials and Related Processes across all projects. Materials testing, analysis and property verification for both design and manufacturing Assessing and Developing new and emerging technologies Materials and processes consultancy for the Government and MoD Representation on International, Government, MoD, Trade body, Strategic steering bodies and Standard Committees Support to REACH and RoHS adherence First Point of contact for Failure Investigations and Forensic Engineering Provide guidance in the use and control of Hazardous Materials Provide solutions for obsolescence Undertake Technical Assessment and Validation of Supplier / Sub-contractor Processes and Manufactured Parts Provide technical support to in country (offset) design and / or manufacture Quality Assessment of Bought-in items Responsibilities: Wide ranging testing and assessment of materials including metallic materials (aluminium, steels, titanium) and non-metallic materials including composites, polymers, paints and adhesives and related processes. Familiarity with general lab equipment is required and any experience of, XRF, SEM, EDX, OES, FTIR, paint inspection equipment and mechanical testing would be beneficial but not essential. Preparation of test reports, interpretation of Engineering drawings and specifications is expected and use of other IT systems such as Word, Excel and Access. Supporting all aspects of the materials lab with routine testing, inspection and characterisation, failure investigations, material selection, support to the supply chain, first article inspection report reviews and material relifing. Support generating or assessment of compliance data such as REACh, RoHS or environmental aspects of engineering designs. Support investigation and resolution of obsolescence due to supply chain, legislation or other factors Support lab health and safety activities (Eg COSHH & Risk Assessments) and quality activities (Eg SOP writing) Skillset/experience required: Practical Laboratory experience - hands on experience managing daily laboratory operations, including sample testing, logging, preparation and disposal Experience in the Aerospace or Defence Industry advantageous but not strictly required. Assessment of materials and components to established international standards including DEF STANs Experience performing routine calibration, troubleshooting and maintenance on lab equipment Experience supporting the selection, procurement and manufacture of engineering parts or components Familiarity working within a certified quality management team Proficiency in lab and data analytical software (Microsoft Excel, Matlab etc) Strict adherence to lab safety protocols including proper handling of hazardous chemicals, SDS management and wearing of appropriate PPE. Ability to accurately document test procedures, analyse raw data and write clear concise technical reports

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a Materials and Process Laboratory Technician subcontractor on an initial 6 month contract. Job Title: Materials and Process Laboratory Technician Rate: £33.56 per hour Location: Stevenage Hybrid / Remote working: 4 days onsite / 1 day from home Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Materials and Process Laboratory Technician Job Description: Understanding the technology of Materials and their related use and manufacturing processes is a key part of ensuring that our products meet our demanding technical, cost and reliability requirements. The Material team consists of a federated UK/Fr integrated team based in Mechanical Engineering, operating with a common process set and links to the other materials teams across the business. We have a wide range of test facilities and specialist knowledge within materials used across the business. The Materials group can provide expertise, support and advice, including details of the laboratory facilities and contacts at our sites across the UK and France. We achieve this by: Technical Guidance and Approval in the Selection, characterisation and Use of Materials and Related Processes across all projects Materials testing, analysis and property verification for both design and manufacturing Assessing and Developing new and emerging technologies Materials and processes consultancy for the Government and MoD Representation on International, Government, MoD, Trade body, Strategic steering bodies and Standard Committees Support to REACH and RoHS adherence First Point of contact for Failure Investigations and Forensic Engineering Provide guidance in the use and control of Hazardous Materials Provide solutions for obsolescence Undertake Technical Assessment and Validation of Supplier / Sub-contractor Processes and Manufactured Parts Provide technical support to in country (offset) design and / or manufacture Quality Assessment of Bought-in items Responsibilities: Wide ranging testing and assessment of materials including metallic materials (aluminium, steels, titanium) and non-metallic materials including composites, polymers, paints and adhesives and related processes. Familiarity with general lab equipment is required and any experience of, XRF, SEM, EDX, OES, FTIR, paint inspection equipment and mechanical testing would be beneficial but not essential. Preparation of test reports, interpretation of Engineering drawings and specifications is expected and use of other IT systems such as Word, Excel and Access. Supporting all aspects of the materials lab with routine testing, inspection and characterisation, failure investigations, material selection, support to the supply chain, first article inspection report reviews and material relifing. Support generating or assessment of compliance data such as REACh, RoHS or environmental aspects of engineering designs. Support investigation and resolution of obsolescence due to supply chain, legislation or other factors Support lab health and safety activities (Eg COSHH & Risk Assessments) and quality activities (Eg SOP writing) Skillset/experience required: • Practical Laboratory experience – hands on experience managing daily laboratory operations, including sample testing, logging, preparation and disposal - Experience in the Aerospace or Defence Industry advantageous but not strictly required. - Assessment of materials and components to established international standards including DEF STANs - Experience performing routine calibration, troubleshooting and maintenance on lab equipment - Experience supporting the selection, procurement and manufacture of engineering parts or components - Familiarity working within a certified quality management team - Proficiency in lab and data analytical software (Microsoft Excel, Matlab etc) - Strict adherence to lab safety protocols including proper handling of hazardous chemicals, SDS management and wearing of appropriate PPE. - Ability to accurately document test procedures, analyse raw data and write clear concise technical reports