Trabajos tooling engineer en HitchinCrear alertas

World Class Defence Organisation based in Stevenage is currently looking to recruit a Manufacturing Engineer. The department are looking for candidates with skills in the following: Verification & validation, design modifications, commissioning, FMEAs, configuration control, sub-assembly manufacturing.Rate: £35.00 per hourLocation: StevenageContract: 37 Hours per weekOvertime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’Duration: 12 Months (initially and then ongoing and long-term thereafter)IR35 status: Inside IR35 (Umbrella)Manufacturing Engineer Job Description:\n\n • As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing.\n, • Compilation and update of Manufacturing Instructions.\n, • Design, Commissioning and proving of associated tooling.\n, • Support the industrial validation process through the use of FMEA’s, FAI’s etc.\n, • Resolution of technical problems that may arise during the manufacturing process.\n, • Route card changes as a result or rework activities.\n, • Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions.\n, • Support to the Non Conformance Process using SAP.\nSkills / Experience:\n\n, • Verification & validation\n, • Design modifications\n, • COMMISSIONING\n, • FMEA’s\n, • Configuration control\n, • Sub-assembly manufacturing\n, • Industrial Validation through the use of FMEA’s, translating design requirements, interpret Design Drawings with a view to producing Manufacturing Build Instructions. Management of Configuration control by the embodiment of Design Modifications,\n, • Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators.\n, • Have experience of Electronic Sub Assembly manufacture through to System level builds.\n, • Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems.\n, • Must be able to work within and contribute to a team environment.\n, • Recognise and understand customer requirements, and respond to them.\nQualifications Required: \n\n, • Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard)\nAND\n\n, • Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.)\nAND\n\n, • Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved\nORDegree in a relevant Engineering subject.

You're a Mechanical Engineer first and a Design Engineer second. As our Mechanical Design Engineer, you'll work on R&D projects from concept through to completion, not just in the design office but hands-on with production and machinery testing. You don't want to just sit in front of a computer; you want to broaden your horizons in a smaller business where you can make a real difference. Based in Bedford, we develop special purpose converting machinery for a variety of industry sectors. BASIC SALARY: up to £41,000 dependent on your relevant experience BENEFITS:· 23 days holiday plus bank holidays · 6% company pension LOCATION: Bedford COMMUTABLE LOCATIONS: Luton, Biggleswade, Sandy, Hitchin, Ampthill, Flitwick, Woburn, Cranfield, Milton Keynes, Newport Pagnell, St Neots, Huntingdon, Rushden, Wellingborough Why should you apply? · Hands on experienced and supportive engineering team to help you · You can work on design projects from start to finish - not just part of them · You can be hands on as a mechanical engineer getting involved on the shop floor with production, assembly and machine / factory acceptance testing · You can develop your engineering skills to diverse your knowledge of electrical and software too JOB DESCRIPTION: Mechanical Engineer, Design Engineer - Machinery, Industrial, R&D Reporting to our Engineering Manager, as our Mechanical Design Engineer you'll be involved from a variety of projects from the get-go. Our projects can range from machinery modifications right through to blank page concept. Rather than just being confined to a design office, you'll be encouraged to be customer-facing, building on your project experience and working closely with the team on the shop floor in production and test. Projects will vary from NPD to reengineering solutions, low batch, high volume and next generation innovation. You will need the ability to juggle several projects at different stages, which will challenge you as a Mechanical Design Engineer. Innovation and quality are at the core of what we do here. YOUR RESPONSIBILITIES: Mechanical Engineer, Design Engineer - Machinery, Industrial, R&D As our Mechanical Design Engineer, you'll be working on several projects at any one time (2-3), at different stages with different engineering challenges. Your main duties will include: · Detailed mechanical design of new machines from cradle to grave · Re-engineer existing machinery to enhance design, manufacturing efficiency, durability, cost down and weight etc · Prototype testing · Internal stakeholder management with production YOUR BACKGROUND: Mechanical Engineer, Design Engineer - Machinery, Industrial, R&D You'll be an experienced Mechanical Design Engineer educated to likely have an HND or B.ENG in Mechanical Engineering. You will also have experience of some or all the following: · Working on design projects from concept through to completion · Competent using SolidWorks as your primary 3D modeling package · Worked closely with production and test (DfMA) · BOM's, materials selection to include stainless steel, aluminum and mild steel THE COMPANY: A privately owned, UK manufacturer of special purpose machinery servicing the FMCG sectors. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Mechanical Design, Design Engineer, Mechanical Engineer, Equipment, Tooling, Industrial, Converting, Rewinding, Spooling, Hydraulics, SolidWorks, DfMA, DFMAE, FEA, DFM, DFA INTERESTED? Please click apply. You will receive an acknowledgment of your application. Please Note: Wallace Hind Selection has been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18626, Wallace Hind Selection

Company description:Fantastic challenges. Amazing opportunities.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career.Job description:Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines.Join our Transparencies team as a Principal Design Engineer and help drive innovative design solutions.We are looking for a Principal Design Engineer to join our Transparencies team to support a portfolio of new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows.The Principal Design Engineer is a technical authority within the Transparency Systems team, responsible for leading complex product development, driving technical strategy, and ensuring engineering excellence across multiple programmes. It spans the full lifecycle: advanced concept development, requirements definition, geometric design, materials and process selection, supporting tooling design, manufacturing development, qualification, and in service support.The Principal Design Engineer also plays a major role in shaping technology roadmaps, mentoring engineering teams, and representing the business in high-level customer, regulatory, and airworthiness discussions.This role requires flexibility for occasional travel, both within the UK and internationally. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday.Job Responsibilities Act as the technical authority for transparency design across multiple programmes, ensuring design integrity, safety, and compliance with customer, regulatory, and airworthiness requirements.Lead the definition of design standards and engineering best practices for transparency systems and approve design solutions, specifications, concessions, rework schemes, and compliance documentation.Provide expert guidance on requirements management, materials selection, structural performance, optical performance, manufacturing processes and qualification methods.Represent Design function in MRBs and serve as the primary escalation point for all MRB-related queries, exercising technical authority to determine and approve the disposition of non conforming parts.Define and validate test methods and/or alternate means of compliance (analysis/similarity) as required to demonstrate design solution complies with requirements.Act as a senior technical interface with customers, suppliers, regulatory bodies, and internal stakeholders. Communicate complex technical information clearly to both technical and non technical audiences.Lead major technical reviews, gate reviews, and customer design reviews, ensuring high quality technical data and presentations.Identify, assess, and manage technical risks across programmes, proposing mitigation strategies and influencing programme direction.Support capability development within the Transparency Systems team including training, knowledge capture, and succession planning.You will contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership.Profile description:What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes:Essential:Degree in Aerospace, Mechanical or similarExperience in Aerospace design / or Aerospace product development.Deep understanding of the full product lifecycle, design practices, manufacturing processes, and airworthiness requirements.Proven ability to lead complex engineering work packages and solve complex technical problems using evidence based, methodical approaches.Familiarity with digital engineering and model based design preferably using CATIA V5.Excellent communication skills, able to create clear, concise, and accurate technical content and present to senior stakeholders.Desirable:Expert user of CATIA V5 for complex modelling and drawing creationChartered Engineer status (CEng)Experience working with defence customers and regulatory authorities.Experience in transparencies, composites, or specialist structures/ systems.This is a hands on role, and the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You'll have strong leadership qualities with experience mentoring and developing engineering teams.You should be adaptable in your approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met.As Principal Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development.Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role.The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually).We offer:What We'll Offer Once youre on board youll get the following perks and benefits:Competitive salary dependent on experienceThe opportunity to earn up to 15% bonusIndustry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basisLife Assurance 8 x salary185 hours holiday + bank holidaysIncome protectionShopping discountsCycle To Work SchemeEmployee Assistance ProgrammeVirtual GP Clinic for you and immediate familyFree onsite parkingLocal gym discountFree airport parkingEnhanced family friendly leaveA collaborative, dynamic working environmentJoin us and keep the world moving click on the link below to applyA Great Place to work needs a Great Way of WorkingEveryone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?TPBN1_UKTJ

On behalf of our client, we are seeking to recruit a Manufacturing Assembly & Integration Engineer Lead on an initial 12-month contract basis. As the Manufacturing Assembly & Integration Engineer your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Role: Manufacturing Assembly & Integration Engineer Pay: £32 - £35 per hour Umbrella rate Location: Stevenage - fully onsite Contract: Monday to Friday, 37 hours per week, 12 months IR35 Status: Inside SC Clearance: SC however can start on BPSS Responsibilities: Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process using FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non-Conformance Process using SAP. Required Qualifications: Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) AND Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.) AND Electrical or Mechanical Enginee...

A fantastic opportunity has arisen for a Manufacturing Technician to join a manufacturing engineering team, taking ownership of production processes and equipment to drive improvements across the manufacturing lines while developing new skills and techniques. This role performs the duties of manufacturing problem identification and resolution, industrial validation support, and manufacturing documentation control, and works closely with the Principal Engineer, coordinating day-to-day support to operations staff and contributing to future opportunities within manufacturing architecture and factory of the future principles. Key Responsibilities: Supporting existing manufacturing lines and new product introduction Supporting the industrial validation process through the use of FMEA's, process proving activities and similar methods Managing configuration control through the embodiment of design modifications into manufacturing documentation and industrial validation Supporting the non-conformance process Ensuring products are produced with consideration to safety, efficiency and economic factors Assuming responsibility for safe operating implementation of changed processes, including liaising with COSHH assessors, SHE and human factors specialists Liaising with the design authority during the product prototype/development phase, to ensure optimised Design for Manufacture (DfM) Compiling and updating Manufacturing Instructions while maintaining production BOMs Developing and controlling tooling The ideal candidate would have: Awareness of digital communication platforms to work and communicate effectively within the workplace The ideal candidate must have: A formal technical Engineering/Craft Apprenticeship to NVQ Level 3, plus formal further education to Level 4 (HNC) or equivalent in a relevant subject, OR a Degree in a relevant subject A proactive approach to problem solving and a commitment to meeting delivery milestones The ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions The ability to work within and contribute effectively to a team environment This position offers a lucrative benefits package, which includes but is not limited to: Company bonus scheme, based on company performance Strong employer pension contribution Opportunity for paid overtime Generous flexi leave allowance, with additional days available Flexible working arrangements welcomed Enhanced parental leave, covering maternity, adoption, shared parental and paternity leave, plus neonatal leave and fertility testing/treatment support Healthcare Cash Plan, providing cash back on everyday healthcare expenses such as optical, dental, and health and wellbeing costs Excellent on-site facilities, including subsidised meals and free car parking If this role looks like your next challenge, please contact Jack ASAP or apply via this advert! Please note that due to the nature of the client's business, only candidates who currently hold full British Citizenship (without limitations) will be considered. We endeavour to reply to every candidate, but if you haven't heard back within 10 days, please understand that you have unfortunately been unsuccessful for this position, or the position has been filled. Please call the office or send an email to discuss other potential positions. TPBN1_UKTJ

World Class Defence Organisation is currently looking to recruit a Mechanical Design Engineer subcontractors on an initial 12 month contract. This role would suit a Mechanical Design Engineer who comes from a strong Defence or Aerospace background has strong Creo / PRO-E skills. Job Title: Mechanical Design Engineer Rate: £50.00 per hour Location: Stevenage Hybrid / Remote working: 4 days a week likely onsite (likely could be lower on a week by week basis; depending on work). 1 day remote. (flexible on start and finish time). A compressed 4 day week (Monday to Thursday) a possibility. Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at time and a quarter Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Mechanical Design Engineer Job Description: An opportunity to become part of Europes No. 1 Missile Systems Designer, as a Mechanical Design Engineer. You will work closely with other functional teams, to develop products to meet our customers needs. Within this role you will have the opportunity to undertake cutting-edge research of novel mechanical technologies to meet the challenges of tomorrow. Responsibilities: Carry out Mechanical Design and proving activities as part of a wider team for prime and variant products, of both piece parts and assemblies. Support/liaise with manufacturing, resolving manufacturing problems & defects. Support to functional & environmental testing and trials. Liaise with suppliers/purchasing to resolve any technical queries that may arise. Planning and reporting on own day-to-day activities to meet project milestones. Gain clarification of and help to generate requirements, including challenging of extraneous requirements to reduce lead time, UPC and design complexity Skillset/experience required: Experience using Creo 3D design tool Knowledge of several of the following.. Manufacturing processes Tolerance studies Environmental test Mass property calculations Material selection FMEA Design for Manufacture/Assembly Environmental Gasket Sealing Tooling/fixtures design Structural design Defence Standards Review processes Product Lifecycles Industrial validation An ability to work as part of a multifunctional engineering team and be able to partake in or host design reviews. An appreciation of other engineering areas/domains. TPBN1_UKTJ

The Senior Product Engineer will be developing digital products and AI Agents with a focus on AI tooling and cloud-native environments.

You're a Mechanical Engineer first and a Design Engineer second. As our Mechanical Design Engineer, you'll work on R&D projects from concept through to completion, not just in the design office but hands-on with production and machinery testing. You don't want to just sit in front of a computer; you want to broaden your horizons in a smaller business where you can make a real difference. Based in Bedford, we develop special purpose converting machinery for a variety of industry sectors. BASIC SALARY: up to £41,000 dependent on your relevant experience BENEFITS: · 23 days holiday plus bank holidays · 6% company pension LOCATION: Bedford COMMUTABLE LOCATIONS: Luton, Biggleswade, Sandy, Hitchin, Ampthill, Flitwick, Woburn, Cranfield, Milton Keynes, Newport Pagnell, St Neots, Huntingdon, Rushden, Wellingborough Why should you apply? · Hands on experienced and supportive engineering team to help you · You can work on design projects from start to finish - not just part of them · You can be hands on as a mechanical engineer getting involved on the shop floor with production, assembly and machine / factory acceptance testing · You can develop your engineering skills to diverse your knowledge of electrical and software too JOB DESCRIPTION: Mechanical Engineer, Design Engineer - Machinery, Industrial, R&D Reporting to our Engineering Manager, as our Mechanical Design Engineer you'll be involved from a variety of projects from the get-go. Our projects can range from machinery modifications right through to blank page concept. Rather than just being confined to a design office, you'll be encouraged to be customer-facing, building on your project experience and working closely with the team on the shop floor in production and test. Projects will vary from NPD to reengineering solutions, low batch, high volume and next generation innovation. You will need the ability to juggle several projects at different stages, which will challenge you as a Mechanical Design Engineer. Innovation and quality are at the core of what we do here. YOUR RESPONSIBILITIES: Mechanical Engineer, Design Engineer - Machinery, Industrial, R&D As our Mechanical Design Engineer, you'll be working on several projects at any one time (2-3), at different stages with different engineering challenges. Your main duties will include: · Detailed mechanical design of new machines from cradle to grave · Re-engineer existing machinery to enhance design, manufacturing efficiency, durability, cost down and weight etc · Prototype testing · Internal stakeholder management with production YOUR BACKGROUND: Mechanical Engineer, Design Engineer - Machinery, Industrial, R&D You'll be an experienced Mechanical Design Engineer educated to likely have an HND or B.ENG in Mechanical Engineering. You will also have experience of some or all the following: · Working on design projects from concept through to completion · Competent using SolidWorks as your primary 3D modeling package · Worked closely with production and test (DfMA) · BOM's, materials selection to include stainless steel, aluminum and mild steel THE COMPANY: A privately owned, UK manufacturer of special purpose machinery servicing the FMCG sectors. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Mechanical Design, Design Engineer, Mechanical Engineer, Equipment, Tooling, Industrial, Converting, Rewinding, Spooling, Hydraulics, SolidWorks, DfMA, DFMAE, FEA, DFM, DFA INTERESTED? Please click apply. You will receive an acknowledgment of your application. Please Note: Wallace Hind Selection has been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18626, Wallace Hind Selection

Join a leading partner of the UK's Ministry of Defence as a Manufacturing Engineer (Assembly and Integration) in Stevenage. Our client is seeking a talented professional to be at the core of their operations, focusing on the manufacturing and assembly of missiles. In this pivotal role, the successful candidate will leverage their previous experience to ensure that products are produced efficiently and within budget, making a significant impact on the business. If you are a skilled Manufacturing Engineer looking to contribute to a high-stakes environment, this opportunity is for you. Key Responsibilities: Creating and updating instructions for manufacturing. Tasks of designing, commissioning, and validating the associated tooling will be undertaken. Assist in the industrial validation process by utilising tools such as FMEAs and FAIs. Resolving any technical issues that may occur during the manufacturing process. Route card changes because of rework activities. Management of configuration control involves incorporating design modifications into the manufacturing instructions. Utilise SAP to assist with the Non-Conformance Process. What do you need?: Qualification Requirements: Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard)"AND" Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.)"AND" Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved"OR" Degree in a relevant Engineering subject. Additional Skill Requirements: Knowledge on analysing design drawings to produce manufacturing build instructions for skilled and semi-skilled operators. Experience of Electronic Sub Assembly manufacture through to System level builds and experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems Excellent interpersonal and communication skills with the ability to work in a diverse team and ability to read, analyse and interpret documents for accuracy and compliance with Code Must be able to work within and contribute to a team environment. Have Electrostatic Discharge (ESD) training, SAP experience What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This role is based at our client's headquarters in Stevenage, a key location for missile operations. The site offers excellent transportation links, an onsite gym, and a coffee shop. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy

Manufacturing Engineer Security Clearance: Due to nature of the work, we can only consider British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. The Opportunity Fantastic opportunity to take ownership of manufacturing engineering processes and equipment, making improvements to production whilst developing new skills and techniques. An opportunity has arisen on the development / production manufacturing lines for a support engineer who will be responsible for translating design requirements into user instructions, including the development of the project manufacturing architecture. You will coordinate day-to-day support to operations staff within the manufacturing facility. This role also offers scope to grow your knowledge within manufacturing as part of future development opportunities, Industrial Validation, manufacturing architecture, and factory-of-the-future principles are among the stretch objectives available for growth. Working with the Principal Engineer, you'll support multiple projects, responsible for manufacturing problem identification and resolution: • Support existing manufacturing lines and new product introduction, • Support the industrial validation process through the use of FMEAs, process proving activities, etc., • Manage configuration control by embodying design modifications into manufacturing documentation and industrial validation, • Support the non-conformance process, • Ensure products are produced with consideration to safety, efficiency, and economic factors, • Take responsibility for safe operating implementation of changed processes, including liaising with COSHH assessors, SHE, and human factors, • Liaise with the design authority during the product prototype/development phase to ensure optimised Design for Manufacture (DfM), • Compile and update Manufacturing Instructions, maintaining production BOMs, • Develop and control tooling What We're Looking For • Formal technical Engineering/Craft Apprenticeship to NVQ Level 3, plus a formal further education certificate to Level 4 (HNC) or equivalent in a relevant subject OR, • A degree in a relevant subject Plus: • A proactive approach to problem solving and commitment to meeting delivery milestones, • Ability to interpret design drawings with a view to producing Manufacturing Build Instructions, • Ability to work within and contribute to a team environment, • Awareness of digital communication platforms to work and communicate effectively within the workplace

World Class Defence Organisation based in Stevenage is currently looking to recruit a Manufacturing Engineer. The department are looking for candidates with skills in the following: Verification & validation, design modifications, commissioning, FMEAs, configuration control, sub-assembly manufacturing. Rate: £35.00 per hour Location: Stevenage Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non Conformance Process using SAP. Skills / Experience: Verification & validation Design modifications COMMISSIONING FMEA’s Configuration control Sub-assembly manufacturing Industrial Validation through the use of FMEA’s, translating design requirements, interpret Design Drawings with a view to producing Manufacturing Build Instructions. Management of Configuration control by the embodiment of Design Modifications, Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within and contribute to a team environment. Recognise and understand customer requirements, and respond to them. Qualifications Required: Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard)AND Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.)AND Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achievedOR Degree in a relevant Engineering subject

JPMorganChase is seeking a Lead Software Engineer for the ATRS Tools team to design and build systems that boost developer confidence and provide Operations with real-time tooling. You will partner across platform engineering, LOBs, Controls, and Audit to deliver high-impact capabilities and ship en

Our client, a well-established name in industrial engineering and field services, is looking for a Data Centre (DC) Tooling Engineer to manage, maintain, and support the tools, test equipment, and calibration processes used by field engineers across data centre client sites. This is a field‑based

Working within a specialist tooling environment, you will be responsible for manufacturing, maintaining and reconditioning precision tooling to exacting engineering standards. If you're an experienced Tooling Engineer looking to join a respected manufacturer where quality and precision are at the he

AvantiGas, part of UGI International, seeks a Global Cyber Security Engineer to own core tooling, contribute to risk governance, and collaborate with IT across the business.

CS Technical Staffing Ltd is seeking an experienced Tooling Design Engineer for the Gaydon, Warwickshire area to support production tooling solutions. The role involves translating engineering requirements into robust tooling designs, ensuring manufacturability, and collaborating with suppliers and

Safran Landing Systems in Gloucester is seeking a Tooling Engineer to design, validate, and maintain tooling solutions for aerospace manufacturing and assembly. You will work with Assembly Engineering, Manufacturing Engineering, Quality, Operations and Production to deliver robust tooling that suppo

Ball Corporation is seeking a Product & Tooling Engineer to lead regional product engineering and tooling initiatives across manufacturing operations. The role focuses on introducing new aluminum products, lightweighting, and tooling-related capital projects while delivering technical expertise in h

A recruitment firm in the UK seeks a Project Engineer to support manufacturing and engineering projects in aerospace. Candidates should have a strong background in engineering, particularly in aerospace, and experience with jigs and tooling is preferred. Responsibilities include leading tooling and

Daniel-Scott Recruitment Ltd in the West Midlands is seeking an experienced Tooling Engineer for a precision tooling environment. This role focuses on grinding, reconditioning, and maintaining tooling to exacting standards within a well-established manufacturing business in Wednesbury.

Osprey Engineering Solutions is seeking a Data Centre Tooling Engineer to manage, maintain and support tools, test equipment and calibration processes used by field engineers across UK data centre sites. This field-based role requires travel between sites to ensure engineers have fully compliant, sa

Speedy Hire Plc is looking for an Engineer - Rail based at Erith to maintain rail tooling and equipment.

The Operations Engineering team provides engineering resources to support operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. Close liaison of activities with Industrial Engineering, Production En

A logistics technology company in Wallingford is looking for a Software Engineer (Tooling) to develop and maintain tools for robotic commissioning and operations. The ideal candidate will have strong software engineering fundamentals, proficiency in Python and Go, and experience with tools like Dock

We're looking for an experienced Tooling Design Engineer with a strong background in tooling and manufacturing processes to support the design, development, validation and delivery of production tooling solutions. You will be responsible for translating engineering requirements into robust tooling d

Energy Jobline CVL is hiring a Tooling Design Engineer in Ampthill, Bedfordshire. The successful candidate will possess experience in tooling design within a manufacturing context, knowledge of CAD and PDM software, and strong communication skills to influence cross-functional teams.

Advanced Resource Managers is seeking a Tooling Design Engineer in Ampthill, Bedfordshire for a 6‑month contract, inside IR35. The engineer will drive tool design through the product lifecycle, reducing costs and improving yield, while ensuring DFMEA/DP processes and documentation are aligned to p

Morrisons is seeking a Maintenance Engineer to join our Manufacturing site. You will maintain, repair and improve tooling systems across production lines, minimizing downtime and boosting efficiency. Reporting to the Engineering Department Manager, you will perform inspections, handle repairs, suppo

The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. Tooling Design Engineer in Ampthill, Bedfordshire. The Tooling Design

My client, an innovative company at the forefront of electric motor technology, requires a Manufacturing Tooling Design Engineer for a contract role outside IR35. The Manufacturing Tooling Design Engineer will develop and maintain my clients manufacturing process.

Seeking a Tooling Manufacturing Engineer to provide design support and DFM/A input, define tooling requirements, and design/validate production tooling and fixtures for electric propulsion technology.

We are looking for a Tooling Manufacturing Engineer for our client, who is a leading aerospace engineering organisation supporting both OEM and aftermarket operations. Tooling Manufacturing Engineer. Tooling Manufacturing Engineer Requiremen.

Develop and maintain manufacturing processes by designing and introducing jigs, tools, and fixtures for new and existing production in electric motor technology.

The OpportunityAs an Associate Mechanical Engineer, you'll provide leadership across multiple Data Centre projects while helping shape the future direction of the mechanical engineering team. United Kingdom75000 - 90000 per annumAssociate Mechanical Engineer – Data CentresLocation: London | Birmin

From early-stage feasibility and Front-End Engineering Design (FEED) studies through to detailed design, commissioning and operational handover, you'll play a key role in shaping innovative engineering solutions that improve essential water and wastewater services for millions of customers. Here's w

Documenting, carrying out administrative tasks and commissioning tasksReceive implementation plans from Project Engineers for peer reviewAssess network topology and circuitry for project planning Write and provide configuration scripts for a variety of network devices and vendorsSupport Project Eng

Key ResponsibilitiesLead mechanical design and delivery across a range of building services projectsManage multiple projects concurrently, ensuring programme, quality, and commercial targets are metProduce feasibility studies, technical appraisals, and sustainability assessmentsEnsure compliance wit

Experience with PLM systems (BOM management and change order release)Experience working closely with associates in manufacturing engineering and production rolesEDUCATION AND CERTIFICATIONSB Eng Degree or higher in Engineering from an accredited college or universityA chartered engineer of a recogni

JOIN EVRI PREMIUM, A NETWORK OF DHL E-COMMERCE THIS SUMMER.Evri Premium, a network of DHL E-Commerce is building a next-generation delivery network and we’re looking for motivated drivers.Whether you already have a suitable van or not, make the most of the brighter, longer summer days ahead wi

Maintenance Engineer (12 month FTC). Are you an apprentice trained Maintenance Engineer or similar with a Manufacturing background looking to work for a truly global packaging xrnqpay company, who offer a great working environme.

JOIN EVRI PREMIUM, A NETWORK OF DHL E-COMMERCE THIS SUMMER.Evri Premium, a network of DHL E-Commerce is building a next-generation delivery network and we’re looking for motivated drivers.Whether you already have a suitable van or not, make the most of the brighter, longer summer days ahead wi

Closing date: 25-08-2026 Customer Team Member - Home Delivery Driver Location: Kilmallie Road , Caol, PH33 7ENPay: £13.Contract: 12 hours per week + regular overtime, permanent contract, part timeWorking pattern: varied shifts including early mornings (store opening), afternoons, late evenings

Make sure to apply with all the requested information, as laid out in the job overview below.Deliver a local round on agreed days and take control of your earning opportunity.Evri delivers over a billion parcels a year through a network of more than 30,000 couriers.Were recruiting self-employed deli

HGV Class 2 Driver Minimum 40 hours per week + paid overtime available Working Pattern: Monday to Friday, day shifts (weekend overtime also available) Are You an Experienced HGV Class 2 Driver Looking to Earn More? Due to continued growth and success, our market-leading E-commerce Parcels Business i