Trabajos engineer electronic en SheffieldCrear alertas

Project Engineer - Progress to Project Manager - Integrated Security - South Yorkshire \n Benefits: \n\n • £42000 - £48000\n, • Car or Allowance\n, • Permanent Benefits\n, • Progression to Project Manager\n, • Experienced CCTV and Access control Team\n\n Role: \n To Project Manage or Project Engineer Integrated Security projects such as Access Control and IP CCTV installations across Yorkshire and commutable areas. \n Manage the Timings, Quali... \n \n ZIPC1_UKTJ

Elevation Recruitment Group are working with an established engineering manufacturer to recruit an Electronics Design Engineer for their growing product development team. \n This is an excellent opportunity for an Electronics Design Engineer looking to take ownership of new product development projects, working from concept through to production on innovative electronic products used in specialist applications. \n Working as part of a multidisciplinary engineering team, the Electronics Design Engineer will be responsible for the design, development, testing and validation of electronic hardware, supporting both new product introduction and continuous improvement activities. Electronics Design Engineer Responsibilities:\n\n • Design and develop analogue and digital electronic circuits for new and existing products.\n, • Produce circuit schematics, PCB layouts and engineering documentation using CAD software.\n, • Design and develop embedded electronic systems, control boards, power management circuits and user interface electronics.\n, • Prototype, test and validate electronic designs through laboratory testing and product verification.\n, • Carry out fault finding, root cause analysis and product improvements.\n, • Work closely with Mechanical Design, Software, Manufacturing and Quality teams throughout the full product lifecycle.\n, • Ensure designs comply with relevant electrical safety, EMC and regulatory standards.\n, • Support product testing, verification, production introduction and ongoing engineering support.\n, • Liaise with suppliers regarding electronic components and technical specifications.\n, • Identify opportunities to improve product performance, reliability, manufacturability and cost.\nWe would be keen to speak with Electronics Design Engineers with:\n\n, • Degree qualified in Electronics Engineering, Electrical & Electronic Engineering or similar.\n, • Previous experience as an Electronics Design Engineer, Electronic Design Engineer or Hardware Design Engineer.\n, • Experience designing analogue and digital electronic circuits.\n, • PCB design and schematic capture experience.\n, • Knowledge of embedded electronics and microcontroller-based systems.\n, • Experience of low voltage electronic design and power electronics.\n, • Understanding of communication protocols\n, • Experience using electronic test equipment\n, • Knowledge of EMC, electrical safety and product compliance standards.\n, • Strong problem-solving skills with experience supporting products through the full design lifecycle.\nDesirable:\n\n, • Embedded C/C++ programming experience.\n, • Experience designing consumer products, appliances, industrial equipment or electromechanical products.\n, • Knowledge of Bluetooth, Wi-Fi or wireless connectivity.\n, • Experience of Design for Manufacture (DFM) and Design for Test (DFT).\n, • Experience developing products for volume manufacture.\n\n This is an excellent opportunity for an Electronics Design Engineer to join a business investing heavily in product development, where you'll work on technically challenging projects from concept through to manufacture while developing your career within a collaborative engineering team. \n If you're an experienced Electronics Design Engineer, Electronic Design Engineer, Hardware Design Engineer or Senior Electronics Engineer looking for your next challenge, we'd love to hear from you.

Futures are supporting a growing controls and automation business in South Yorkshire in their search for a Systems Engineer. This is a varied role where you'll work across multiple engineering disciplines, supporting the design, integration, commissioning, and deployment of advanced systems used in challenging real world applications. The successful systems engineer will have a broad understanding of electrical, electronic, software and mechanical engineering disciplines in order to create system specifications for control systems and automation focused projects. \n Systems Engineer - Role - LabVIEW / Electronics / R&D / Commissioning / Control Systems / Automation \n\n • Develop and deliver automation and control system solutions.\n, • Work closely with software, electrical, electronic, and mechanical engineers on multidisciplinary projects.\n, • Develop, maintain, and support LabVIEW applications.\n, • Assist with system integration, commissioning, and customer support activities.\n, • Create technical documentation, specifications, and project records.\n, • Visit customer sites across the UK to support project delivery and commissioning.\n\n Systems Engineer - Skills & Experience - LabVIEW / Electronics / R&D / Commissioning / Control Systems / Automation \n\n • Experience working within a systems, automation, controls, or integration engineering environment.\n, • Practical experience using LabVIEW.\n, • Knowledge of instrumentation, automation, control systems, or data acquisition.\n, • Strong diagnostic, troubleshooting, and problem-solving skills.\n, • Ability to work across multiple engineering disciplines.\n, • Comfortable communicating with customers and internal project teams.\n, • Full UK driving licence and willingness to travel when required.\n\n If you're looking for a technically varied engineering role, this could be for you. Please apply now! \n Systems Engineer | LabVIEW | Systems Integration | Automation | Control Systems | Electronics | Electrical Engineering | Commissioning | Projects

Job Title: Systems EngineerLocation: South Yorkshire (UK wide travel)Salary: Up to £50k (DOE) We're partnering with a growing specialist engineering company that designs and delivers bespoke technology solutions for customers across a range of highly regulated sectors. Due to continued growth, they're looking to recruit a Systems Engineer or Senior Systems Engineer to join their collaborative engineering team. You'll work on varied, technically challenging projects from concept through to commissioning, developing integrated hardware and software solutions for complex engineering applications.About the Role\n\n • Deliver engineering projects across the full system lifecycle, from requirements capture through to commissioning.\n, • Design and develop data acquisition, control, and automation systems.\n, • Program efficient control and data acquisition applications.\n, • Develop intuitive graphical user interfaces (GUIs).\n, • Select instrumentation and measurement hardware to meet customer specifications.\n, • Install and commission systems at customer sites across the UK.\n, • Troubleshoot complex hardware and software issues.\n, • Produce technical documentation including specifications, test plans, and user manuals.\n, • Work closely with electrical, software, and mechanical engineers to deliver integrated solutions.\n, • Support customer meetings, technical presentations, demonstrations, and proposal development.\n, • Contribute to system architecture, technical planning, and project delivery.\nAbout You\n\n, • Degree qualified in Electrical Engineering, Electronic Engineering, Mechatronics, Computer Science, Mechanical Engineering, or a related discipline.\n, • Experience developing industrial control, automation, or measurement systems.\n, • Knowledge of instrumentation and data acquisition systems.\n, • Experience capturing technical requirements and producing engineering documentation.\n, • Strong fault-finding and problem-solving skills across hardware and software systems.\n, • Excellent communication skills with the ability to work directly with customers.\n, • Comfortable managing multiple technical priorities in a collaborative environment.\n, • Full UK driving licence and willingness to travel to customer sites across the UK (approximately 50%).\nDesirable Skills\n\n, • Experience with PLC platforms such as Siemens or Allen-Bradley.\n, • National Instruments (NI) hardware, including DAQ, CompactRIO or PXI.\n, • LabVIEW, LabVIEW FPGA or LabVIEW Real-Time.\n, • Programming experience in Python, C, C++, or Java.\n, • Object-oriented software development.\n, • Control panel or instrumentation experience.\n, • Experience producing system-level electrical diagrams using EPLAN or similar CAD software.\n, • NI certifications (CLD, CLA, CTD, CTA, CLED).\n Please note we cannot offer sponsorship for this role. If interested, please send over an updated CV.

Job Title: Electrical Design EngineerLocation: South Yorkshire (UK wide travel)Salary: Up to £50k (DOE) We're working with a specialist engineering company that designs and delivers bespoke systems for customers across a range of highly regulated industries. Due to continued growth, they're looking for an Electrical Design Engineer to join their systems integration team. This is an excellent opportunity to work on varied, technically challenging projects from concept through to installation and commissioning, collaborating with software, systems, and project engineers to deliver innovative solutions.About the Role\n\n • Design electrical control systems and instrumentation using EPLAN (or similar electrical CAD packages)\n, • Select appropriate control, measurement, and electrical hardware based on customer requirements\n, • Produce electrical schematics, technical documentation, test plans, and commissioning documentation\n, • Build, test, troubleshoot, and commission electrical systems\n, • Support on-site installation and commissioning across customer sites\n, • Ensure designs comply with relevant industry standards, safety regulations, and CE/UKCA requirements\n, • Collaborate with software, mechanical, and systems engineers to deliver integrated engineering solutions\n, • Participate in hardware design reviews and resolve technical issues across electrical and control systems\n, • Support supplier selection, component integration, and proof-of-concept activities\n, • Deliver projects on time, within budget, and to customer expectations\nAbout You\n\n, • Degree qualified in Electrical, Electronic, Controls, Mechatronics, or a related engineering discipline\n, • Experience designing electrical or control systems\n, • Proficient with EPLAN, AutoCAD Electrical, SolidWorks Electrical, or similar schematic design software\n, • Hands-on experience with electrical system build, testing, fault finding, and commissioning\n, • Experience with PLC-based control hardware (e.g. Siemens, Allen-Bradley) or industrial instrumentation\n, • Good understanding of EMC principles and practical electrical design\n, • Knowledge of CE/UKCA compliance and electrical design standards\n, • Strong problem-solving skills with the ability to work across multidisciplinary engineering teams\n, • Willingness to travel to customer sites across the UK (approximately 30-50%)\nDesirable Skills\n\n, • Functional safety or safety instrumented systems (e.g. IEC 61508)\n, • ATEX or hazardous area design experience\n, • Basic mechanical design for control panels and enclosures\n, • National Instruments (NI) hardware or software experience\n, • PLC programming or modification\n, • 18th Edition qualification\n, • Experience with safety PLCs or SISTEMA\n Please note, we cannot offer sponsorship for this opportunity. If interested, please send over an updated CV.

Reed Engineering & Manufacturing are working with a leading Engineering & Manufacturing company \n Job Title: Electrical Controls & Instrumentation Engineer \n Job Purpose \n To provide specialist instrumentation and control engineering support to ensure the safe, reliable, and efficient operation of the companies manufacturing processes. The role focuses on maintaining and improving automation systems across assets such as furnaces and other heavy engineering plant within the site \n Key Responsibilities \n 1. Asset Reliability & Maintenance \n\n • Deliver high levels of plant availability through effective maintenance of instrumentation and control systems.\n, • Maintain and calibrate field instruments (pressure, flow, temperature, level, gas analysers).\n, • Support reliability-centred maintenance (RCM) and predictive maintenance initiatives.\n, • Provide rapid fault diagnosis and resolution to minimise production downtime.\n\n 1. Control Systems & Automation \n\n • Configure, maintain, and upgrade PLC, DCS, and SCADA systems used across company operations.\n \n, • Common platforms: Siemens (S7/TIA), ABB, Rockwell Automation etc \n \n, • Support and enhance automation systems for:\n \n, • furnace processes\n, • Fault diagnosis within the site for controls, instrumentation and combustion \n \n, • Ensure robust control logic, interlocks, and safety systems are maintained.\n\n 1. Continuous Improvement \n\n • Identify opportunities to improve process stability, yield, energy efficiency, and product quality.\n\n 1. Projects & Engineering Development \n\n • Support capital projects, upgrades, and plant modifications.\n, • Contribute to engineering design, including P&IDs, specifications, and functional design documents (FDS).\n, • Supervise installation and commissioning activities, including loop checks and SAT/FAT testing.\n\n 1. Health, Safety & Environmental Compliance \n\n • Ensure all systems comply with company Zero Harm safety culture.\n, • Participate in risk assessments such as HAZOP, SIL verification, and FMEA.\n, • Ensure compliance with COMAH regulations and other UK industry standards.\n, • Promote safe working practices in a heavy industrial environment.\n\n 1. Stakeholder Collaboration \n\n • Work closely with operations, mechanical, and electrical teams to support production targets.\n, • Liaise with OEMs, contractors, and engineering partners.\n, • Provide technical guidance and mentorship to technicians and apprentices.\n\n 1. Documentation & Governance \n\n • Maintain accurate maintenance records, calibration certificates, and engineering documentation.\n, • Ensure compliance within company standards and audit requirements.\n\n Skills & Experience \n Essential Technical Skills \n\n • Strong experience with:\n \n, • PLC programming (Siemens, Allen-Bradley) would be advantageous\n, • Burner Management identification and finding \n, • Distributed Control Systems (ABB, Honeywell, etc.)\n, • SCADA systems\n, • SAT and TUS experience would be advantageous \n \n\n Desirable \n\n • Experience within steel or heavy industry (e.g., metals, energy, petrochemical).\n, • Exposure to high-temperature or continuous manufacturing processes.\n, • Knowledge of drives, motors, and process automation in the heavy engineering industry \n\n Qualifications \n\n • A relevant qualification (or equivalent experience) in:\n \n, • Control & Instrumentation Engineering\n, • Electrical/Electronic Engineering\n \n

Senior Electronics Engineer\n Location: £35,000 - £55,000 Per Annum + Excellent Benefits. The Role: \n An exciting opportunity has arisen for an experienced Senior Electronics Engineer to join an innovative engineering and manufacturing business. Reporting to the Technical Manager, you will play a key role in the design, development and continuous improvement of electronic products, supporting projects from initial concept through to production and customer delivery. \n This is a varied, hands-on role offering the opportunity to work across the full product lifecycle while collaborating with engineering, production and technical teams. Key Responsibilities: \n\n • Design and develop analogue and digital electronic circuits and PCBs.\n, • Support products throughout the full lifecycle, from concept and prototyping to production and ongoing improvements.\n, • Review and redesign existing electronic products to meet current quality, safety and regulatory standards.\n, • Carry out fault finding to component level and support product testing and validation.\n, • Produce technical documentation, including wiring diagrams, build instructions and test procedures.\n, • Ensure products comply with relevant UK, EU and international standards.\n, • Work closely with manufacturing and engineering teams to support production and resolve technical issues.\n, • Assist with continuous improvement initiatives and new product development.\n, • Provide technical guidance and communicate complex engineering concepts to both technical and non-technical stakeholders.\nAbout You: \n The successful candidate will have: \n\n • Degree (or equivalent) in Electronics Engineering.\n, • Strong experience in analogue and digital PCB design.\n, • Experience with power supplies, DC motor controls and battery chargers.\n, • Excellent fault-finding skills to component level.\n, • Experience using laboratory test equipment, including oscilloscopes, multimeters and power supplies.\n, • Knowledge of UK, EU and relevant industry standards.\n, • Strong communication, organisation and problem-solving skills.\n, • Ability to work independently and as part of a collaborative engineering team.\nDesirable Skills: \n\n, • Experience with PCB design software such as EasyPC.\n, • Knowledge of Assembler, BASCOM or FlowCode programming.\n, • Experience working within a manufacturing or product development environment.\n, • CSCS, IPAF or Health & Safety qualifications.\nWhat's on Offer: \n\n, • Competitive salary\n, • Excellent career development opportunities\n, • Varied and technically challenging projects\n, • Supportive engineering team\n, • Opportunity to work on innovative products from concept to manufacture\n\n A full UK driving licence is required, along with a willingness to travel occasionally within the UK and overseas.

Senior Electronics EngineerOffice Based, commutable from Rotherham, Sheffield, Worksop, Bakewell, Chesterfield and surrounding areas.£45,000-£55,000 + Monday to Friday (37.5hrs) + Office Based, Early Finish on Fridays + Technical Progression + Company BenefitsExcellent opportunity to join a well-renowned and innovative manufacturer, where you will work on specialised projects from initial concept through to completion.On offer is the chance to lead your own projects, collaborate with global teams, and be recognised as an expert in your field, with opportunities for long-term progression.This well-established company have grown year on year specializing in the production, manufacturing and installation of bespoke safety products for customers in the UK and globally. The client prides themselves on producing a unique, quality product to all their customers, to improve safety and regularly invest in new methods and technology.The day to day responsibilities include the design, testing, development and implementation of all related electronic hardware design and system activities. This is an exciting opportunity for someone looking to join an industry leader that will support your career development whilst working autonomously in a technically challenging position.The Role: Overseeing the design, test, development and certificating of electronic hardware products Overseeing both new product development and existing products projects Collaborate with global offices, some international travel will be needed.The Person: Senior Electronic Engineer / PCB Layout Engineer / Senior Hardware Engineer/ Electronic Design Specialist or similar backgrounds considered Must have experience in the design and development of projects from start to finish Extensive knowledge of analogue and digital PCB design Fault ffinding to component level experience Must be commutable to Nottingham and prepared for international travel Reference Number: BBBH277708To apply for this role or for to be considered for further roles, please click "Apply Now" or contact Nick Phillips at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. \n Rise Technical Recruitment Limited is acting as an Employment Agency in relation to this vacancy.

Are you ready to take the next step in your career as a Senior Electronics Engineer? \n Our client, a leading organisation in the manufacturing sector, is on the lookout for an innovative and driven individual to join their dynamic team. If you have a passion for electronics and thrive in a collaborative environment, this could be the perfect opportunity for you! \n What You'll Do:As a Senior Electronics Engineer, you will report directly to the Technical Manager and play a crucial role in shaping both current and future electronic product offerings. Your expertise will support multiple departments and ensure excellence in delivering high-quality products to customers worldwide. \n \n Here's what you can expect: \n \n\n • Design & Development: Utilise your skills in analogue and digital PCB design to create cutting-edge electronic products.\n, • Product Lifecycle Management: Engage in the full product lifecycle, from concept generation through to product release, and demonstrate your ability to deliver designs into service.\n, • Compliance & Standards: Navigate the regulatory landscape of the UK, EU, and US, ensuring your designs meet all necessary compliance standards.\n, • Team Collaboration: Work hands-on with your team to tackle challenges from first principles, fostering an environment of innovation and problem-solving.\n, • Quality Assurance: Review, update, and potentially redesign existing electrical items to enhance quality and safety standards.\n, • Documentation & Support: Generate essential documentation, including Wiring Diagrams and build instructions, to guide manufacturing processes and support product testing throughout their lifecycle.\n\n \n What We're Looking For:The ideal candidate will possess a blend of technical expertise and excellent communication skills. You should be comfortable explaining complex concepts to both technical and non-technical audiences, and be ready to roll up your sleeves to get involved with hands-on projects. Here's what you should bring to the table: \n \n\n • Strong background in analogue and digital PCB design, including Linear & Pulse Width Modulation Power Supplies, DC Motor Controls, and Battery Chargers.\n, • Proficient in fault finding to component level and safe practises regarding mains voltage primary Transformers.\n, • Relevant Electronics Degree (or equivalent) and a CSCS card.\n, • Familiarity with Assembler/BASCOM/FlowCode programming languages is a plus.\n, • Experience in PCB design using EasyPC is desirable.\n\n \n Why Join? \n\n • Dynamic Work Environment: Join a team that values collaboration, creativity, and innovation.\n, • Career Development: Opportunities for personal and professional growth within a thriving organisation.\n, • Impactful Work: Contribute to products that make a difference in the lives of customers globally.\n\n \n Working hours Days - Monday - Friday \n If you're ready to take on this exciting challenge and become a key player in a forward-thinking organisation, we want to hear from you! Apply now and let's drive the future of electronics together. \n How to Apply:Please submit your CV and a cover letter detailing your relevant experience and why you would be a great fit for this role. \n Join us in shaping the future of electronics - your journey starts here! \n Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. \n Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. \n By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Our client is a global leader in stainless steel, as a business they strive to employ people who are passionate about success and seek to inspire others in their working environment.At their site in Sheffield they are requiring a skilled Electrical Shift Engineer to join their dynamic and hardworking team on a permanent basis in the heavy industry department.As Electrical Shift Engineer your job will be to manage all electrical works and functions across the department.THE BENEFITS:Quarterly bonus with a max pay out of 20%Overtime is paid at 1.5 x with certain Bank Holidays paid at 2 x (Overtime is on Saturdays) 28 days holiday (for 1st year including BH, increasing annually up to a max of 35 after 5 years' service)Pension - Under 30 - 1% (Employee), matched, 10% (total potential) % (employee), matched, 10-14% (total potential) 50+ 1-5%, matched, 10-18% (total potential) Costco Membership (Membership fees to be paid by employee) Westfield Health Level 1 planGrab a steel (Site with exclusive discounts and savings) Gym Discount (Only SIV centres) 02 Discount (Only new items not existing) THE ROLE: Working on a shift basis covering the electrical operations requirements of a heavy engineering plant. Electrical maintenance of all motors and drives. Fault finding on electronic cards to component level. Maintenance of the mill thyrisitor drives. Electrical maintenance of overhead D.C. and A.C. cranes. Maintenance of PLC systems, specifically ABB and Allen Bradley. Use of programming tools to identify faults on PLC systems and changed parameters as required. Monitoring and maintaining the furnace control systems, calibration of controllers and the air / gas transducers, changing of thermocouples and the lighting procedure of furnaces. Reacting to breakdown requirements and safely / quickly identifying faults to minimise the impact on production.Working 4 on.4 off no weekends.Salary:£41,422.09 plus 18.67% shift allowance £49,155.59THE CANDIDATE: Education to H.N.C. Level in an Electrical Engineering discipline. A basic understanding of P.C. based software, Excel etc An understanding and ability to interpret electrical drawings Experience in writing reports detailing the activities during shift Experience in working to safety legislation relevant to operations and electrical maintenance* Experience in adhering to S.W.P.'s, risk assessments, I+I procedures and the permit systems, as well as I.E.E. Regulations.The Consultancy:Edwards & Pearce acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Edwards & Pearce is an Equal Opportunities Employer.

Commissioning Engineer - HVAC (Full Expert Training)£40,000 - £48,000 + Overtime + Bonus + Van + Door to Door + Private Healthcare + 3x Life Insurance + Private Sick Pay + Critical Illness Cover + Healthcare Cash Back Field based role - Manchester/Sheffield/LeedsAre you aspiring to become a Commissioning Engineer with a fantastic company who will invest in your ongoing training & development & who are passionate about promoting their dedicated teams through the business are they continue to experience rapid growth across their UK markets?Are you from an electrical or electronic background & looking for OEM Technical training to become a qualified commissioning engineer, where you can significantly boost your earnings through door to door pay, lots of overtime, company bonuses & stay away allowances all whilst working towards becoming an industry specialist?This is an exciting opportunity where you can progress your technical knowledge & your career through fantastic training, with an award winning company who have a great reputation in their industry .This company have over 110 employees & have innovated their product rage year on year. Due to continued growth, they are now looking to expand their team with highly skilled, motivated & customer service focused field-based Commissioning Engineers. This role will suit an Electrician aspiring to become a Commissioning Engineer with a great company who truly value their employees and actively promote ongoing development.The Role:Commissioning & Service works on client's sites such as Schools and Universities Working on HVAC systems (product training provided) Field based role with excellent support from a passionate, dedicated & social team where you will be able to travel & stay away to maximise earnings through overtime, door to door pay & industry leading bonus structures 40 hours per week, 1x for overtime between 40-50 hours and 1.5x for 50+ hoursThe Person:Level 3 electrical qualification looking to move into the HVAC field in a commissioning & service role with a great company who offer full training, qualifications & ongoing progression Must be flexible to travel & stay away when required Ability to pass DBS checks Full UK Driver's LicenseReference Number:277530To apply for this role or to be considered for further roles, please click "Apply Now" or contact at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

• We are accepting applications from varying seniority levels, from Graduate to Principal Engineer, and will adjust terms accordingly. About Amodo\n Amodo is a hardware engineering company building the 21st century's most important technologies. Our team of mechanical, electronic, firmware, and software engineers are trusted by world-leading startups, universities, governments and philanthropists to solve pressing technical challenges. See who they are on our website - including MIT, Cambridge, Oxford, Imperial, ARIA and Rand Corp. \n We are selective in the projects we take on and proactive in seeking out where our exceptional engineering teams can make the most impact. We believe in differential technology development: deliberately accelerating safety-enhancing technologies to ensure human flourishing. Not every technology is inevitable – rather, the market fails to incentivise key domains. We work in these areas. What do we do?\n At Amodo you will work with a world class team to create some of the most important technologies of our time. We focus on high speed development and real world impact, making sure we’re continually delivering tangible, concrete progress across the board. You will see your designs manufactured and distributed globally, your research inform policy, and you will support multi-million pound projects. \n We’re currently focused on four key fields: AI safety, biosecurity, humane tech, and accelerating science (developing the hardware tools that scientific breakthroughs require, but don't yet exist). In addition to client work, we want to bring our inventions into the world as spin-out companies, open-source projects, and products. We're actively hiring people to take charge of making this happen. \n New invention & new research - We design and build new products, equipment, and tools. Invention and rapid iteration are core to our DNA. We use these new inventions and our experience to perform new research and push boundaries. \n More products than powerpoints - Common failure modes of today’s consultancies include risk aversion, theatre for clients, and misrepresentation of what is important in projects. We reject this approach. We’re here to do truth-seeking, progress-optimising engineering, not to make slide decks. \n Work that matters - Unlike many consultancies we also get involved at the pre-product stage. Our experience in industry and biotech puts us in the position to run feasibility studies for new and existing companies. This research-heavy work can include literature reviews, feasibility modelling and market research. A bit on our culture and what it would look like to work here:\n\n • Our values: Truth-seeking, excellent, enthusiastic, kind, humble, and always learning\n, • Our approach: We think before diving in, iterate fast, and focus on the highest-impact 80/20 work. We favour rapid experimentation, quick feedback loops, and sprinting to "something that works" rather than over-planning.\n, • Feedback culture: We practice radical candor, which means being clear and direct while staying kind, and welcoming feedback at every level\n, • No "not my job"-ism: If we see something wrong, we fix it. If your part of a project is going great and another is struggling, don't settle for polishing a chunk of a struggling ship\n, • Socials: Table tennis every lunch, personal project evenings, pub trips, trail running club, and more\n, • Office: Spacious, modern space in central Sheffield, with parking and bike storage. In-house workshop and equipment for our mechanical and electrical work.\n, • Project structure: You will generally be on 1 main project at a time, whilst supporting on 1-2 smaller projects. Team sizes vary from 2-10+ engineers, where most are ~4. Durations largely are within the 2 - 8 months range.\n, • Project variety: We get to work on loads of super varied, technically complex and interesting projects, from drone mounted laser holography for climate-tech to next-gen motors.\nAbout you\n We value drive, culture fit, and a track-record of engineering excellence and above all else, but the below competencies, interests, and attributes are extremely desirable: \n\n • Strong background in electronic design - component selection, schematic design, PCB layout, and component procurement\n, • Experience with hand THT and SMD PCB assembly and modifications\n, • Circuit inspection and debugging using oscilloscopes and logic analysers\n\n Alongside the above, the below competencies will strengthen an application: \n\n • Producing embedded firmware (C/C++)\n, • Familiarity with mechanical design\n, • SPICE and/or RF simulation experience\n, • Experience balancing functional electronic design requirements with additional constraints (such as thermal, mechanical, and power requirements etc.)\n, • An eye for beautiful and practically achievable design\n\n We’ve doubled year on year since our founding in 2023, and we aim to do so again in 2026. That means we're actively hiring across electronics, FPGA, mechanical, firmware, software, physics, HPC infrastructure, and DevOps - plus exceptional talent in any discipline. If you're an ambitious top performer, engineering or otherwise, please fill in our form linked. Benefits\n\n • Free lunch every day\n, • Flexible hybrid working\n, • Flexible working hours\n, • 35 days holiday (including bank holidays)\n, • We can pay your professional registration and institution fees\n, • Relocation assistance may be negotiated\n, • £300 annual personal project budget with weekly maker evenings (tools, pizza and support provided)\n\n To let you know a bit more about what to expect, our core interview process is as follows. We may occasionally include 1-3 additional stages, including aptitude tests or video calls with one of our founders. \n\n • 15 minute technical screening interview\n, • 1 hour technical interview\n, • 1.5 hour in-person interview\n, • Offer\n

Do you have experience designing PLC control systems with Siemens or Allan Bradley? \n And good electrical engineering skills and experience of Eplan? \n This could be the role for you! \n Manufacturing Futures are supporting an automation-focused engineering business in their search for a Controls Engineer. This role is well suited to an Electrical or Electronic Engineering graduate, or an early-career Controls Engineer, looking to develop a long-term career within industrial automation and control systems. \n As a Controls Engineer, you will join a supportive and technically strong team with an excellent reputation for training and development. The successful Controls Engineer will work on a range of standard and bespoke automated systems, gaining exposure to electrical design, control systems and project delivery under the guidance of experienced engineers. \n Controls Engineer – Role & Responsibilities – Automation / Electrical / Controls \n\n • Design electrical and electronic control systems for automated machinery\n, • Produce electrical schematics and system drawings using CAD software\n, • Support PLC, HMI and automation programming activities\n, • Create BOMs and supporting technical documentation\n, • Work on assigned projects with guidance from a senior engineer or mentor\n, • Assist with technical queries and problem-solving within the engineering team\n, • Investigate and evaluate new automation technologies\n\n Controls Engineer – Skills & Experience – Automation / Electrical / Controls \n\n • Degree, HNC/HND or equivalent qualification in Electrical or Electronic Engineering\n, • Experience or exposure to PLCs and control systems\n, • Proficient with electrical CAD software such as AutoCAD or similar\n, • Previous experience in a Controls Engineer or automation-related role\n, • Strong desire to learn and develop within electrical and automation engineering\n, • UK Driving Licence\n\n Controls Engineer – Automation – Electrical – Controls – PLC \n If you are a Controls Engineer looking to build your career within a supportive automation environment, please apply now.

Dakro Legionella Risk Assessor Location: Doncaster (South and West Yorkshire) Package: up to £30,000 plus company vehicle and company benefits Join a Team That Values Quality, Development and People At Dakro, we're building more than a compliance business. We're building a team of skilled professionals who take pride in delivering high-quality work, supporting each other and continuously developing their expertise. As part of the growing Obsequio Group, Dakro specialises in water hygiene, pre-commission cleaning, flushing, commercial plumbing, ductwork cleaning and air hygiene services. From major data centres and hospitals to complex commercial developments, our engineers play a vital role in delivering safe, compliant and efficient building systems across the UK. We're growing rapidly and are now looking for an experienced Flushing Engineer to join our team. If you're looking for a role where you'll be trusted, supported and given genuine opportunities to progress, we'd love to hear from you. Why Join Dakro? ✅ Competitive salary with overtime opportunities ✅ Company van, uniform and tablet provided ✅ 25 days annual leave plus bank holidays ✅ AVIVA pension scheme ✅ Funded training, industry qualifications and apprenticeship programmes ✅ Clear opportunities for career progression ✅ Work on high-profile projects across the UK ✅ Supportive team culture where your contribution matters ✅ Part of a growing national business with ambitious plans At Dakro, we believe our employees deserve good support. We invest in our people, promote from within wherever possible and create an environment where individuals can build rewarding long-term careers. Development isn't just something we talk about, it's something we actively invest in. Through ongoing training, recognised industry qualifications and funded apprenticeship programmes, we'll help you build your skills, expand your knowledge and take the next step in your career. The Opportunity We’re looking for an experienced Legionella Risk Assessor to join our growing Water Compliance team. This is a varied, client-facing role focused on carrying out Legionella Risk Assessments across a range of commercial, industrial and public-sector sites. You’ll be responsible for inspecting hot and cold-water systems, identifying potential risks and producing clear, practical reports that help our clients stay compliant and keep their water systems safe. You’ll work independently, manage your own workload and build strong relationships with clients. It’s a great opportunity for an experienced Risk Assessor who enjoys a varied role and wants to develop their technical and client-facing skills within a growing business. What We’re Looking For · Previous experience working as a Legionella Risk Assessor. · Experience carrying out Legionella Risk Assessments across commercial, industrial or public-sector environments. · Good knowledge of ACoP L8 and HSG274. · Strong understanding of domestic hot and cold-water systems and Legionella control. · Experience identifying issues such as stagnation, dead legs, temperature control and poor system design. · Good report-writing and documentation skills. · Strong attention to detail and a practical approach to problem solving. · Confident communicating with clients and explaining technical findings clearly. · Comfortable working independently and managing your own diary and workload. · Full UK driving licence and willingness to travel to client sites. Desirable · Relevant Legionella Risk Assessment qualification/training. · Experience producing water-system schematics. · Experience working across different sectors and more complex water systems. · Knowledge of wider UK water hygiene legislation and guidance. · Membership of a relevant professional body. · Experience using electronic reporting or compliance systems. Our Culture We're proud of the culture we've built. Our people are trusted to do their jobs, supported when they need help and recognised for the contribution they make. We believe in open communication, teamwork and continuous improvement. Whether you've been with us for ten years or ten weeks, your ideas and input matter. As we continue to grow, we're committed to maintaining the supportive, down-to-earth culture that's helped make Dakro what it is today. Ready for Your Next Challenge? If you're an experienced engineer looking for a company that values quality work, invests in its people and offers genuine opportunities to develop your career, we'd love to hear from you. Join Dakro and help us deliver industry-leading water compliance services across the UK. Dakro is an equal opportunities employer committed to diversity and inclusion. We welcome applications from all qualified candidates regardless of background. This job specification is not exhaustive and may be subject to modification in line with business requirements

Are you a Softare Engineer with good LabVIEW development skills? And a good grasp of object orientated programming? Want to work on interesting projects with great people? This could be for you! Futures is looking for a Senior Software Engineer who has experience with Labview development (preferably a labview qualification). This full-time role comes with an attractive salary and benefits package, and will allow you to work on some of the most exciting projects around. As a Software Engineer / Senior Software Engineer, you will be developing software in LabVIEW for a variety of new R&D projects. In this Labview Developer / Senior Software Engineer role you can expect to: Design, write and document code that is maintainable, extensible, reliable and efficient Participate in design reviews, including preliminary and critical design reviews Undertake integration and validation Liaise with customers on specific projects and their software, testing and user interface requirements Translate system specification into software module specification. To apply for this Labview Developer / Senior Software Engineer role, you will need demonstrable experience of software design in the Test & Measurement industry. You will also require the following: LabVIEW & TestStand experience (CLD minimum desirable) An appreciation of PXI (NI, Pickering, Keysight), Compact RIO, PC, and FPGA Some electronic hardware design experience preferred A formal qualification in engineering design (degree or equivalent) If this Senior Software Engineer (LabVIEW Developer) role could appeal please do apply now

Our client is a global leader in stainless steel, as a business they strive to employ people who are passionate about success and seek to inspire others in their working environment. At their site in Sheffield they are requiring a skilled Electrical Shift Engineer to join their dynamic and hardworking team on a permanent basis in the heavy industry department. As Electrical Shift Engineer your job will be to manage all electrical works and functions across the department. THE BENEFITS: Quarterly bonus with a max pay out of 20% Overtime is paid at 1.5 x with certain Bank Holidays paid at 2 x (Overtime is on Saturdays) 28 days holiday (for 1st year including BH, increasing annually up to a max of 35 after 5 years' service) Pension - Under 30 - 1% (Employee), matched, 10% (total potential) 30-49 - 1-3% (employee), matched, 10-14% (total potential) 50+ 1-5%, matched, 10-18% (total potential) Costco Membership (Membership fees to be paid by employee) Westfield Health Level 1 plan Grab a steel (Site with exclusive discounts and savings) Gym Discount (Only SIV centres) 02 Discount (Only new items not existing) THE ROLE: Working on a shift basis covering the electrical operations requirements of a heavy engineering plant. Electrical maintenance of all motors and drives. Fault finding on electronic cards to component level. Maintenance of the mill thyrisitor drives. Electrical maintenance of overhead D.C. and A.C. cranes. Maintenance of PLC systems, specifically ABB and Allen Bradley. Use of programming tools to identify faults on PLC systems and changed parameters as required. Monitoring and maintaining the furnace control systems, calibration of controllers and the air / gas transducers, changing of thermocouples and the lighting procedure of furnaces. Reacting to breakdown requirements and safely / quickly identifying faults to minimise the impact on production. Working 4 on.4 off no weekends. Salary: £41,422.09 plus 18.67% shift allowance £49,155.59 THE CANDIDATE: Education to H.N.C. Level in an Electrical Engineering discipline. A basic understanding of P.C. based software, Excel etc An understanding and ability to interpret electrical drawings Experience in writing reports detailing the activities during shift Experience in working to safety legislation relevant to operations and electrical maintenance * Experience in adhering to S.W.P.'s, risk assessments, I+I procedures and the permit systems, as well as I.E.E. Regulations. The Consultancy: Edwards & Pearce acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Edwards & Pearce is an Equal Opportunities Employer

Manufacturing Futures are supporting an automation-focused engineering business in their search for an Electrical Design Engineer. This role is well suited to an Electrical or Electronic Engineering graduate, or an early-career Electrical Design Engineer, looking to develop a long-term career within industrial automation and control systems. As an Electrical Design Engineer, you will join a supportive and technically strong team with an excellent reputation for training and development. The successful Electrical Design Engineer will work on a range of standard and bespoke automated systems, gaining exposure to electrical design, control systems and project delivery under the guidance of experienced engineers. Electrical Design Engineer – Role & Responsibilities – Automation / Electrical / Controls Design electrical and electronic control systems for automated machinery Produce electrical schematics and system drawings using CAD software Support PLC, HMI and automation programming activities Create BOMs and supporting technical documentation Work on assigned projects with guidance from a senior engineer or mentor Assist with technical queries and problem-solving within the engineering team Investigate and evaluate new automation technologies Electrical Design Engineer – Skills & Experience – Automation / Electrical / Controls Degree, HNC/HND or equivalent qualification in Electrical or Electronic Engineering Experience or exposure to PLC’s and control systems Proficient with electrical CAD software such as AutoCAD or similar Previous experience in an Electrical Design Engineer or automation-related role Strong desire to learn and develop within electrical and automation engineering UK Driving Licence Electrical Design Engineer – Automation – Electrical – Controls – PLC If you are an Electrical Design Engineer looking to build your career within a supportive automation environment, please apply now

Offer | up to £65k + Annual Bonus + Health Cash Plan Location | Sheffield - with UK-wide travel Skills | Instrumentation, Control, PLC/NI Hardware, LabVIEW Job Description & Scope We are partnering with a dynamic SME systems integrator to recruit a System Engineer / Senior System Engineer. This company provides bespoke hardware engineering, software development, and data science services for a wide range of automated data acquisition, test, measurement, control, and IIoT applications. Joining a passionate, collaborative team of developers, systems architects, and engineers, you will deliver full lifecycle projects. The entry point for this role will depend on your technical knowledge and proven capabilities. You will help customers across diverse industries including automotive, academia, energy, and aerospace. The work will involve delivering everything from small data acquisition systems to the commissioning of complex control systems. Key Requirements Knowledge . Degree in engineering (Electrical/Electronic, Mechatronics, Mechanical, Computer Science, or equivalent). Strong knowledge of instrumentation, control, and industrial automation. Experience . Demonstrable experience in measurement and instrumentation design, requirements capture, and writing technical proposals. PLC or NI instrumentation and control panel experience is essential. Capabilities . A results-focused, action-oriented mentality with strong problem-solving skills to analyse challenges methodically and think creatively. Must be able to multitask and prioritise effectively. Desirable . Experience with mainstream PLCs (Siemens, Allen Bradley), object-oriented principles, text-based languages (Python, Java, C, C++), NI hardware/software (LabVIEW, cRIO, PXI, DAQmx), and drawing system-level diagrams in EPlan. Communication . Excellent written, oral, and presentation skills to deal effectively with customers and deliver successful project outcomes. The Role Manage full lifecycle project delivery as part of a team, with architecture design and project management scaling based on your experience. Programme memory and speed-efficient data acquisition and control applications, and develop intuitive graphical user interfaces. Select the correct measurement hardware for a given application based on customer specifications. Troubleshoot, debug, and provide effective solutions for complex systems involving both software and hardware. Undertake the on-site installation and commissioning of hardware and software systems. Work with the business development team to create technical solutions, provide project costings, and respond to RFQs. Create comprehensive technical documentation in line with quality assurance systems, including specifications, test plans, and user manuals. Deliver technical presentations and demonstrations to customers, colleagues, and partners. Package Salary . £45,000 £60,000 dependent on experience Holiday . 23 days annual leave, rising to 24 after 5 years service, plus an optional annual leave buy-back scheme. Health Plan . Health benefit cash plan offering access to 24-hour online GP services and financial contributions towards medical care. Support . Comprehensive Employee Assistance Programme (EAP) offering advice and counselling for wellbeing, legal, and financial matters. Annual Bonus . Enrolment in the annual company performance-linked bonus scheme after your first year of service. Other . Workplace pension, employee referral scheme, and a Cycle to Work scheme. Travel You must have the flexibility to travel throughout the UK to customer sites up to 50% of the time (including short notice), with potential global travel. Projects. Delivering innovative bespoke solutions across automotive, academia, energy, and aerospace sectors. Culture . A vibrant, supportive, and collaborative environment where expertise in leading hardware and software is combined to solve complex challenges. If this sounds like something you want to be involved with then please click apply. TPBN1_UKTJ

Offer | up to £55k + Annual Bonus + Health Cash Plan Ensure you read the information regarding this opportunity thoroughly before making an application. Location | Sheffield (Office/Workshop) with UK-wide travel Skills we are looking for | EPlan, PLC/NI Hardware, Commissioning, EMC/Safety Job Description & Scope We are partnering with a dynamic and innovative system integration business to recruit an Electrical Design Engineer. This company is highly regarded for developing cutting-edge, automated data acquisition, test, measurement, and control systems for a diverse range of industries including aerospace, energy, and healthcare. Joining the system integration team, you will be responsible for the end-to-end design and build of bespoke control systems and instrument racks. The role provides an opportunity to deliver turnkey solutions in a fast-paced environment, working closely with software, systems, and project teams to ensure technical excellence, robust compliance, and customer satisfaction. Key Requirements Knowledge. Degree in Electrical/Electronic Engineering, Mechatronics, or a related discipline. Knowledge of CE/UKCA marking and relevant safety directives (e.g., IEC 60204, BS EN 61010, BS EN 61508) is highly beneficial. Experience. Strong practical background backed by the ability to design electrical and electronic systems. Extensive experience with EPLAN (or alternative schematic tools like AutoCAD Electrical / SolidWorks Electrical) is essential. Commissioning. This role involves travelling up to 50% of the year. Proven hands-on experience in the on-site installation, debugging, and commissioning of electrical systems. Hardware. Familiarity with mainstream PLCs (Siemens, Allen-Bradley) or National Instruments (NI) hardware platforms. Capabilities. A results-focused mentality with excellent problem-solving skills to analyse technical challenges and deliver creative, effective solutions. Must be able to manage time and prioritise effectively. Communication. Excellent verbal and written skills to support customer interactions, generate technical documentation, and foster cross-functional teamwork. The Role Accurately capture and develop comprehensive electrical designs using EPlan in a timely manner. Select the correct control and measurement hardware based on stringent customer specifications. Take a hands-on approach to building, testing, and commissioning electrical systems in the workshop and on-site. Provide guidance on the installation and working functionality of software and hardware, including configuration settings. Generate robust technical documentation, including test plans, commissioning documents, and technical packs. Ensure all designs meet relevant standards, including IEC, ATEX, and machinery safety requirements. Troubleshoot problems and incompatibilities across both software and hardware, applying a practical understanding of EMC principles. Work alongside the business development team to develop proofs of concept and technical quotations. Package Salary. Competitive base salary dependent on experience. Holiday. 23 days annual leave, rising to 24 after 5 years service, plus an optional annual leave buy-back scheme. Health Plan. Health benefit cash plan offering access to 24-hour online GP services and financial contributions towards medical care (physio, dental, optician). Support. Comprehensive Employee Assistance Programme (EAP) offering advice and counselling for wellbeing, legal, and financial matters. Annual Bonus. Enrolment in the annual company performance-linked bonus scheme after your first year of service. Other. Workplace pension, employee referral scheme, and a Cycle to Work scheme. Travel. Flexibility to travel throughout the UK to customer sites (up to 30-50% of the time, including short notice), with potential overseas trips. You must hold a full, valid UK driving licence and own a vehicle for work travel. Projects. Delivering bespoke turnkey solutions for automated test, measurement, and control across highly regulated and fascinating sectors. Culture. A dynamic and fast-paced collaborative engineering environment that rewards hands-on, autonomous, and results-driven individuals. xrnqpay If this sounds like something you want to be involved with then please click apply.

Reed Engineering & Manufacturing are working with a leading Engineering & Manufacturing company Job Title: Electrical Controls & Instrumentation Engineer Job Purpose To provide specialist instrumentation and control engineering support to ensure the safe, reliable, and efficient operation of the companies manufacturing processes. The role focuses on maintaining and improving automation systems across assets such as furnaces and other heavy engineering plant within the site Key Responsibilities 1. Asset Reliability & Maintenance Deliver high levels of plant availability through effective maintenance of instrumentation and control systems. Maintain and calibrate field instruments (pressure, flow, temperature, level, gas analysers). Support reliability-centred maintenance (RCM) and predictive maintenance initiatives. Provide rapid fault diagnosis and resolution to minimise production downtime. 2. Control Systems & Automation Configure, maintain, and upgrade PLC, DCS, and SCADA systems used across company operations. Common platforms: Siemens (S7/TIA), ABB, Rockwell Automation etc Support and enhance automation systems for: furnace processes Fault diagnosis within the site for controls, instrumentation and combustion Ensure robust control logic, interlocks, and safety systems are maintained. 3. Continuous Improvement Identify opportunities to improve process stability, yield, energy efficiency, and product quality. 4. Projects & Engineering Development Support capital projects, upgrades, and plant modifications. Contribute to engineering design, including P&IDs, specifications, and functional design documents (FDS). Supervise installation and commissioning activities, including loop checks and SAT/FAT testing. 5. Health, Safety & Environmental Compliance Ensure all systems comply with company Zero Harm safety culture . Participate in risk assessments such as HAZOP, SIL verification, and FMEA . Ensure compliance with COMAH regulations and other UK industry standards. Promote safe working practices in a heavy industrial environment. 6. Stakeholder Collaboration Work closely with operations, mechanical, and electrical teams to support production targets. Liaise with OEMs, contractors, and engineering partners. Provide technical guidance and mentorship to technicians and apprentices. 7. Documentation & Governance Maintain accurate maintenance records, calibration certificates, and engineering documentation. Ensure compliance within company standards and audit requirements. Skills & Experience Essential Technical Skills Strong experience with: PLC programming (Siemens, Allen-Bradley) would be advantageous Burner Management identification and finding Distributed Control Systems (ABB, Honeywell, etc.) SCADA systems SAT and TUS experience would be advantageous Desirable Experience within steel or heavy industry (e.g., metals, energy, petrochemical). Exposure to high-temperature or continuous manufacturing processes. Knowledge of drives, motors, and process automation in the heavy engineering industry Qualifications A relevant qualification (or equivalent experience) in: Control & Instrumentation Engineering Electrical/Electronic Engineering TPBN1_UKTJ

Our client is a global leader in stainless steel, as a business they strive to employ people who are passionate about success and seek to inspire others in their working environment. At their site in Sheffield they are requiring a skilled Electrical Shift Engineer to join their dynamic and hardworking team on a permanent basis in the heavy industry department. As Electrical Shift Engineer your job will be to manage all electrical works and functions across the department. THE BENEFITS: Quarterly bonus with a max pay out of 20% Overtime is paid at 1.5 x with certain Bank Holidays paid at 2 x (Overtime is on Saturdays) 28 days holiday (for 1st year including BH, increasing annually up to a max of 35 after 5 years' service) Pension - Under 30 - 1% (Employee), matched, 10% (total potential) 30-49 - 1-3% (employee), matched, 10-14% (total potential) 50+ 1-5%, matched, 10-18% (total potential) Costco Membership (Membership fees to be paid by employee) Westfield Health Level 1 plan Grab a steel (Site with exclusive discounts and savings) Gym Discount (Only SIV centres) 02 Discount (Only new items not existing) THE ROLE: Working on a shift basis covering the electrical operations requirements of a heavy engineering plant. Electrical maintenance of all motors and drives. Fault finding on electronic cards to component level. Maintenance of the mill thyrisitor drives. Electrical maintenance of overhead D.C. and A.C. cranes. Maintenance of PLC systems, specifically ABB and Allen Bradley. Use of programming tools to identify faults on PLC systems and changed parameters as required. Monitoring and maintaining the furnace control systems, calibration of controllers and the air / gas transducers, changing of thermocouples and the lighting procedure of furnaces. Reacting to breakdown requirements and safely / quickly identifying faults to minimise the impact on production. Working 4 on.4 off no weekends. Salary: £41,422.09 plus 18.67% shift allowance £49,155.59 THE CANDIDATE: Education to H.N.C. Level in an Electrical Engineering discipline. A basic understanding of P.C. based software, Excel etc An understanding and ability to interpret electrical drawings Experience in writing reports detailing the activities during shift Experience in working to safety legislation relevant to operations and electrical maintenance * Experience in adhering to S.W.P.'s, risk assessments, I+I procedures and the permit systems, as well as I.E.E. Regulations. The Consultancy: Edwards & Pearce acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Edwards & Pearce is an Equal Opportunities Employer. TPBN1_UKTJ

Senior Electronics Engineer Office Based, commutable from Rotherham, Sheffield, Worksop, Bakewell, Chesterfield and surrounding areas. The day to day responsibilities include the design, testing, development and implementation of all related electronic hardware design and system activities. The Rol

Job Title: Maintenance Engineer Type: Full-Time, Permanent Location: Sheffield, South Yorkshire Ref. No: 1028 Salary: £52,719 per annum Shifts: 12-hour day & night shifts, (Suez Shift Pattern) Please note you must have full and legal rights to work in the UK or Ireland. (We cannot sponsor or support VISA applicants). About the Role Our client, a global leader in automated logistics solutions, is seeking skilled Maintenance Engineers to join their resident team in Sheffield. This is a hands-on, technically demanding role focused on maintaining high availability of automated warehouse systems through both preventive and corrective maintenance. Key Responsibilities Deliver preventive and corrective maintenance to the highest standards, meeting KPIs and customer expectations. Troubleshoot issues within your discipline (electrical, mechanical, or multi-skilled). Support the Shift Manager, including deputising in their absence. Coach and mentor technicians on equipment operation and maintenance. Conduct technical audits and ensure accurate spare parts management. Skills & Experience Experience with conveyors, sorters, cranes, hanging garment systems, robotics, or similar. Knowledge of PLC/control systems, WCS/WMS, SCADA, and CMMS/PPM systems. Self-motivated, results-focused, and capable of motivating others. Excellent communication and relationship-building skills. Qualifications ONC/HNC or BTech in Electrical/Electronic or Mechanical Engineering, or NVQ Level 3+. About Us: Wills Consultants is an independent recruitment consultancy specialising in engineering, finance and office professionals. Wills Consultants has an extensive client base that ranges from the thriving SME sector through to national and international PLCs and actively support the Armed Forces Covenant. TPBN1_UKTJ

Job Description Project Engineer - Progress to Project Manager - Integrated Security - South Yorkshire If you are interested in applying for this job, please make sure you meet the following requirements as listed below. Benefits: £42000 - £48000 Car or Allowance Permanent Benefits Progression

Wallace Hind Selection is seeking a skilled Field Service Engineer to service end‑of‑line packaging machinery across the UK. The candidate should have hands‑on experience in the food and beverage packaging sector, electrical and electronic qualifications, and a proven track record of working w

Project Engineer - Progress to Project Manager - Integrated Security - South Yorkshire. To Project Manage or Project Engineer Integrated Security projects such as Access Control and IP CCTV installations across Yorkshire and commutable areas.

Lead electronic design projects from concept to completion, overseeing hardware design, testing, development, and certification for safety products.

Lead electronic design projects from concept to completion, overseeing hardware design, testing, development, and certification for safety products.

Manufacturing Vision Engineer / Machine Vision Engineer – Industrial Automation Location: Sheffield, South Yorkshire Department: Manufacturing Automation Employment: Full-time Overview: We are currently recruiting for our client in Sheffield, for a Manufacturing Engineer that has experience of getting involved in building machine vision systems behind next-generation green hydrogen manufacturing. This is an exciting role that would suit a hands-on Machine Vision Engineer, Vision Systems Engineer, Automation Engineer or Manufacturing Engineer with hands-on experience of industrial vision, automated inspection and production equipment? The Role: The role will work with machine vision cameras, optics, lighting, image processing, Automated Optical Inspection (AOI), Data Matrix/DMC identification and PLC-controlled automation, helping ensure our production equipment can consistently detect defects, identify products and capture the data required for quality and traceability. This role will also play an important role in introducing new manufacturing equipment, supporting NPI and production ramp-up, troubleshooting vision systems and establishing robust, repeatable vision standards across multiple machines and production areas. The role will be joining a manufacturing organisation where automation, inspection and industrialisation are critical to scaling production. This is an opportunity to have genuine technical ownership: you'll help determine how machine vision is integrated into production equipment, solve real manufacturing problems and develop inspection solutions that need to work reliably in a live production environment. Duties & Responsibilities: Lead the integration and commissioning of industrial machine vision systems into automated manufacturing equipment and production lines. Configure and optimise machine vision cameras, lighting, optics and image-processing systems to achieve reliable and repeatable defect detection. Develop and implement Automated Optical Inspection (AOI) solutions for manufacturing applications. Integrate vision systems with PLC-controlled machinery and industrial automation systems. Support the installation, setup, commissioning and ramp-up of new manufacturing equipment. Translate manufacturing and quality requirements into practical vision inspection specifications and system configurations. Troubleshoot machine vision problems including image quality, lighting, camera setup, detection performance, communications and system integration. Work with equipment suppliers, machine builders and automation engineers to specify, validate and improve vision systems. Implement and maintain standards for machine vision, inspection and DMC/Data Matrix identification across multiple machines and production areas. Support NPI and industrialisation activities by ensuring vision and inspection systems are production-ready. Ensure vision data is captured correctly and made available to MES, traceability and downstream manufacturing systems. Drive continuous improvement of inspection capability, system reliability, repeatability and manufacturing robustness. What we're looking for: Essential experience Degree, HND, HNC or equivalent qualification in Electrical Engineering, Electronic Engineering, Automation, Mechatronics, Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a related discipline. Around 5+ years' experience in manufacturing engineering, industrialisation, NPI or manufacturing automation. Proven hands-on experience with industrial machine vision, automated inspection or AOI systems. Strong understanding of industrial cameras, optics, lighting, image acquisition and image processing. Experience integrating vision systems into automated manufacturing machinery or production lines. Experience working with PLCs and industrial automation systems. Practical experience of commissioning, setting up, troubleshooting and optimising machine vision systems. Experience working with machine builders, OEMs or equipment suppliers during equipment integration or commissioning. Ability to translate manufacturing and quality requirements into effective vision inspection solutions. Experience working in a production/manufacturing environment where system reliability, repeatability and uptime are important. Desirable experience: Experience with any of the following would be advantageous: Automated Optical Inspection (AOI) Data Matrix / DMC / 2D code identification Barcode and traceability systems MES integration Industrial communications Vision system standardisation across multiple production machines New Product Introduction (NPI) Manufacturing equipment introduction Industrial automation and controls Robotics and automated handling systems High-volume manufacturing environments Continuous improvement / manufacturing optimisation What makes someone successful in this role? We're looking for someone who enjoys solving real-world manufacturing and automation problems. You'll be well suited if you are: Hands-on and comfortable working directly with production equipment. Naturally analytical when diagnosing vision, automation and inspection problems. Comfortable commissioning and troubleshooting equipment rather than working purely from a design office. Able to work effectively with Automation, Manufacturing, Process and Quality Engineers. Confident working with external machine builders and equipment suppliers. Focused on making systems stable, repeatable, reliable and production-ready. Comfortable taking ownership of technical problems and driving them through to resolution. If you're currently working as a Machine Vision Engineer, Vision Systems Engineer, AOI Engineer, Automation Engineer, Controls Engineer, Manufacturing Automation Engineer, Industrialisation Engineer, NPI Engineer or Inspection Systems Engineer, we'd be interested in hearing from you. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

Job Title: Systems Engineer Location: South Yorkshire (UK wide travel) Salary: Up to £50k (DOE) We're partnering with a growing specialist engineering company that designs and delivers bespoke technology solutions for customers across a range of highly regulated sectors. Due to continued growth, they're looking to recruit a Systems Engineer or Senior Systems Engineer to join their collaborative engineering team. You'll work on varied, technically challenging projects from concept through to commissioning, developing integrated hardware and software solutions for complex engineering applications. About the Role Deliver engineering projects across the full system lifecycle, from requirements capture through to commissioning. Design and develop data acquisition, control, and automation systems. Program efficient control and data acquisition applications. Develop intuitive graphical user interfaces (GUIs). Select instrumentation and measurement hardware to meet customer specifications. Install and commission systems at customer sites across the UK. Troubleshoot complex hardware and software issues. Produce technical documentation including specifications, test plans, and user manuals. Work closely with electrical, software, and mechanical engineers to deliver integrated solutions. Support customer meetings, technical presentations, demonstrations, and proposal development. Contribute to system architecture, technical planning, and project delivery. About You Degree qualified in Electrical Engineering, Electronic Engineering, Mechatronics, Computer Science, Mechanical Engineering, or a related discipline. Experience developing industrial control, automation, or measurement systems. Knowledge of instrumentation and data acquisition systems. Experience capturing technical requirements and producing engineering documentation. Strong fault-finding and problem-solving skills across hardware and software systems. Excellent communication skills with the ability to work directly with customers. Comfortable managing multiple technical priorities in a collaborative environment. Full UK driving licence and willingness to travel to customer sites across the UK (approximately 50%). Desirable Skills Experience with PLC platforms such as Siemens or Allen-Bradley. National Instruments (NI) hardware, including DAQ, CompactRIO or PXI. LabVIEW, LabVIEW FPGA or LabVIEW Real-Time. Programming experience in Python, C, C++, or Java. Object-oriented software development. Control panel or instrumentation experience. Experience producing system-level electrical diagrams using EPLAN or similar CAD software. NI certifications (CLD, CLA, CTD, CTA, CLED). Please note we cannot offer sponsorship for this role. If interested, please send over an updated CV

Job Title: Electrical Design Engineer Location: South Yorkshire (UK wide travel) Salary: Up to £50k (DOE) We're working with a specialist engineering company that designs and delivers bespoke systems for customers across a range of highly regulated industries. Due to continued growth, they're looking for an Electrical Design Engineer to join their systems integration team. This is an excellent opportunity to work on varied, technically challenging projects from concept through to installation and commissioning, collaborating with software, systems, and project engineers to deliver innovative solutions. About the Role Design electrical control systems and instrumentation using EPLAN (or similar electrical CAD packages) Select appropriate control, measurement, and electrical hardware based on customer requirements Produce electrical schematics, technical documentation, test plans, and commissioning documentation Build, test, troubleshoot, and commission electrical systems Support on-site installation and commissioning across customer sites Ensure designs comply with relevant industry standards, safety regulations, and CE/UKCA requirements Collaborate with software, mechanical, and systems engineers to deliver integrated engineering solutions Participate in hardware design reviews and resolve technical issues across electrical and control systems Support supplier selection, component integration, and proof-of-concept activities Deliver projects on time, within budget, and to customer expectations About You Degree qualified in Electrical, Electronic, Controls, Mechatronics, or a related engineering discipline Experience designing electrical or control systems Proficient with EPLAN, AutoCAD Electrical, SolidWorks Electrical, or similar schematic design software Hands-on experience with electrical system build, testing, fault finding, and commissioning Experience with PLC-based control hardware (e.g. Siemens, Allen-Bradley) or industrial instrumentation Good understanding of EMC principles and practical electrical design Knowledge of CE/UKCA compliance and electrical design standards Strong problem-solving skills with the ability to work across multidisciplinary engineering teams Willingness to travel to customer sites across the UK (approximately 30-50%) Desirable Skills Functional safety or safety instrumented systems (e.g. IEC 61508) ATEX or hazardous area design experience Basic mechanical design for control panels and enclosures National Instruments (NI) hardware or software experience PLC programming or modification 18th Edition qualification Experience with safety PLCs or SISTEMA Please note, we cannot offer sponsorship for this opportunity. If interested, please send over an updated CV

Design and Estimating Engineer Chesterfield Fire Detection, Security and Network Design £Competitive The Role The role of the Design and Estimating Engineer is to design and cost complex fire, life safety, electronic security systems and network infrastructure. You will be responsible for reviewing client/tender specification documents and drawings, liaising with suppliers, using CAD software for the detailed design, costing the projects and drafting proposal documents. You will work collaboratively with various departments, our clients, consultants, suppliers and colleagues, in order to ensure internal & external deadlines are met and that projects are accurately designed & costed. Duties and Responsibilities Progressing sales enquiries and tenders' requirements by working closely with Business Development Managers to ensure that customer requirements are understood Designing various life safety and security systems plus any other integrated building systems as specified within the Company's scope of work based upon customer requirements, specifications, drawings, and current standards Preparing proposals, quotations and tender documents and ensuring they are prepared on time and in line with company standards Assessing the risk factors influencing the security and fire design, to either enhance accordingly or to communicate back to the client Ensuring all quotations and system design specifications are compatible with the requirements of all applicable technical and regulatory standards and Codes of Practice Adhering to all Company policies and procedures Ensuring handovers and deadlines are achieved Reviewing changes in customers' specifications and modifying designs accordingly No job description can be entirely comprehensive, and the jobholder will be expected to adapt and carry out such other duties as may be required from time to time, on the understanding that they will be within the individual's remit and capability, and consistent with the status and responsibilities of the role within the business. Person Specification Essential Good working knowledge of fire, security or network infrastructure products and systems and their features/limitations Previous design and estimating experience, including the ability to prepare cost sheets and proposal documents Good verbal and written communication skills Excellent interpersonal skills Experience of reading and publishing specifications and technical drawings Excellent organisational and time management skills Excellent attention to detail Desirable Proficient in the use of the latest AutoCAD and/or Revit packages Current knowledge of technologies, technical and regulatory standards, which are relevant to the design process Previous installation or commissioning experience within a relevant sector Knowledge of European regulatory standards Proficiency in a European language is desirable but not essential We are an equal opportunity employer and value diversity. All employment is decided on the basis of qualifications, merit and business need. Working Conditions The role is based in an open plan office environment with multi-screen computer use. On occasion the role may require support at our other offices and onsite at customers' sites for design meetings. Fore more information on the role please call Giles Churchill at Amida Solutions between 8am to 8pm Weekdays or Weekends

Reed Engineering & Manufacturing are working with a leading Engineering & Manufacturing company Job Title: Electrical Controls & Instrumentation Engineer Job Purpose To provide specialist instrumentation and control engineering support to ensure the safe, reliable, and efficient operation of the companies manufacturing processes. The role focuses on maintaining and improving automation systems across assets such as furnaces and other heavy engineering plant within the site Key Responsibilities 1. Asset Reliability & Maintenance Deliver high levels of plant availability through effective maintenance of instrumentation and control systems. Maintain and calibrate field instruments (pressure, flow, temperature, level, gas analysers). Support reliability-centred maintenance (RCM) and predictive maintenance initiatives. Provide rapid fault diagnosis and resolution to minimise production downtime.2. Control Systems & Automation Configure, maintain, and upgrade PLC, DCS, and SCADA systems used across company operations. Common platforms: Siemens (S7/TIA), ABB, Rockwell Automation etc Support and enhance automation systems for: furnace processes Fault diagnosis within the site for controls, instrumentation and combustion Ensure robust control logic, interlocks, and safety systems are maintained.3. Continuous Improvement Identify opportunities to improve process stability, yield, energy efficiency, and product quality.4. Projects & Engineering Development Support capital projects, upgrades, and plant modifications. Contribute to engineering design, including P&IDs, specifications, and functional design documents (FDS). Supervise installation and commissioning activities, including loop checks and SAT/FAT testing.5. Health, Safety & Environmental Compliance Ensure all systems comply with company Zero Harm safety culture. Participate in risk assessments such as HAZOP, SIL verification, and FMEA. Ensure compliance with COMAH regulations and other UK industry standards. Promote safe working practices in a heavy industrial environment.6. Stakeholder Collaboration Work closely with operations, mechanical, and electrical teams to support production targets. Liaise with OEMs, contractors, and engineering partners. Provide technical guidance and mentorship to technicians and apprentices.7. Documentation & Governance Maintain accurate maintenance records, calibration certificates, and engineering documentation. Ensure compliance within company standards and audit requirements.Skills & Experience Essential Technical Skills Strong experience with: PLC programming (Siemens, Allen-Bradley) would be advantageous Burner Management identification and finding Distributed Control Systems (ABB, Honeywell, etc.) SCADA systems SAT and TUS experience would be advantageous Desirable Experience within steel or heavy industry (e.g., metals, energy, petrochemical). Exposure to high-temperature or continuous manufacturing processes. Knowledge of drives, motors, and process automation in the heavy engineering industry Qualifications A relevant qualification (or equivalent experience) in: Control & Instrumentation Engineering Electrical/Electronic Engineering

Commissioning Engineer - HVAC (Full Expert Training) £40,000 - £48,000 + Overtime + Bonus + Van + Door to Door + Private Healthcare + 3x Life Insurance + Private Sick Pay + Critical Illness Cover + Healthcare Cash Back Field based role - Manchester/Sheffield/Leeds Are you aspiring to become a Commissioning Engineer with a fantastic company who will invest in your ongoing training & development & who are passionate about promoting their dedicated teams through the business are they continue to experience rapid growth across their UK markets? Are you from an electrical or electronic background & looking for OEM Technical training to become a qualified commissioning engineer, where you can significantly boost your earnings through door to door pay, lots of overtime, company bonuses & stay away allowances all whilst working towards becoming an industry specialist? This is an exciting opportunity where you can progress your technical knowledge & your career through fantastic training, with an award winning company who have a great reputation in their industry . This company have over 110 employees & have innovated their product rage year on year. Due to continued growth, they are now looking to expand their team with highly skilled, motivated & customer service focused field-based Commissioning Engineers. This role will suit an Electrician aspiring to become a Commissioning Engineer with a great company who truly value their employees and actively promote ongoing development. The Role: Commissioning & Service works on client's sites such as Schools and Universities Working on HVAC systems (product training provided) Field based role with excellent support from a passionate, dedicated & social team where you will be able to travel & stay away to maximise earnings through overtime, door to door pay & industry leading bonus structures 40 hours per week, 1x for overtime between 40-50 hours and 1.5x for 50+ hours The Person: Level 3 electrical qualification looking to move into the HVAC field in a commissioning & service role with a great company who offer full training, qualifications & ongoing progression Must be flexible to travel & stay away when required Ability to pass DBS checks Full UK Driver's License Reference Number:(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Electronic Security Systems Engineer – CCTV, Intruder Alarm & Access Control- Cheshire - £34,000- £42,000 £34,000- £42,000 (dependent on experience) Company vehicle and fuel card Overtime opportunities available On-call rota with additional earning p

Take ownership of complex electronic designs across a varied portfolio of technology projects. Design analogue, digital and RF electronic systems for advanced technology applications. Ability to produce clear technical documentation and engineering records.

Senior Python Engineer - Electronic Trading. They are currently seeking a Senior Python Engineer to join a major global investment bank's Equities and Risk technology organisation. This is a hands-on engineering position focused on building and enhancing software that underpins Front Office trading

We are looking for a Senior Electronic Hardware Engineer to join an engineering team developing low-power electronic products for critical industrial applications. Senior Electronic Hardware Engineer (ATEX Certification). The ideal candidate will have experience designing electronic hardware product

Senior Electronic Hardware Engineer (ATEX Certification) Location: Nottingham (Hybrid – 4 days onsite) Salary: £65,000 – £70,000 + Relocation Package Available The Role We are looking for a Senior Electronic Hardware Engineer to join an engineering team developing low-power electronic products

Jackson Hogg Ltd is seeking an Electrical & Electronic System Engineer in County Durham, United Kingdom, with a salary of £45,000-£57,000 DOE plus 10% bonus. The role involves designing and documenting complex frameworks and systems, collaborating with mechanical, electrical and software engineers

Get Staff is seeking an Electronic Security Systems Engineer for the West Midlands region.

ZF Friedrichshafen AG is seeking an Electronic Component Engineer in Solihull to manage the lifecycle of electronic components used in automotive products. The ideal candidate will have a Bachelor's degree in electrical engineering, strong knowledge of electronic components, and experience in compon