Offres electrical manager à ExeterCréer des alertes d'emploi

Role – Substation Mechanical Supervisor \n Location – Exeter \n \n Mint Selection are partnered with a leading organisation within the energy sector to recruit an experienced Substation Mechanical Supervisor for a project based in Exeter. \n \n The role will be focused specifically on the 400kV substation package, taking responsibility for supervising the mechanical installation of high-voltage substation equipment and associated infrastructure. \n \n This is an excellent opportunity to join a major energy infrastructure project on a long-term contract, working within an experienced project delivery team through the construction, installation and commissioning phases. \n \n Key Responsibilities \n\n • Supervise and coordinate mechanical installation activities across the 400kV substation package, ensuring works are completed safely, efficiently and in accordance with the project programme.\n, • Oversee the installation and assembly of HV substation equipment including switchgear, transformers, busbars, support structures and associated mechanical infrastructure.\n, • Supervise the mechanical installation of GIS/AIS equipment and ensure all works are completed in accordance with manufacturer requirements, approved drawings and project specifications.\n, • Coordinate mechanical subcontractors and installation teams, providing technical support and resolving site issues as required.\n, • Ensure installation works comply with approved drawings, specifications, ITPs, RAMS, manufacturer instructions and relevant transmission standards.\n, • Take ownership of mechanical QA/QC activities including inspections, quality walk-downs, ITP compliance, punch listing, snagging and management of non-conformances through to close-out.\n, • Monitor workmanship and construction progress, identifying potential delays, installation issues, design clashes or quality concerns and implementing corrective actions where required.\n, • Coordinate closely with electrical, civil and commissioning teams to ensure interfaces between packages are effectively managed.\n, • Conduct toolbox talks, daily briefings and site inspections while promoting a strong health, safety, environmental and quality culture.\n, • Ensure works are carried out in accordance with RAMS, permit-to-work systems, project HSEQ procedures and applicable National Grid requirements.\n, • Maintain accurate site records, inspection documentation, progress reports and quality documentation throughout construction.\n, • Support short-term planning, contractor coordination meetings, programme updates and reporting to the Construction/Site Manager.\n, • Assist with inspection, testing, commissioning and handover activities as the project progresses towards energisation.\n\n \n Experience Required \n\n • Proven experience as a Mechanical Supervisor, Substation Supervisor or Installation Supervisor on high-voltage substation projects.\n, • Minimum 5 years' relevant substation experience, with 10+ years highly desirable.\n, • Strong experience delivering transmission-level substations, ideally at 400kV.\n, • Previous experience working on National Grid (NGET) and/or SPEN sites is highly desirable.\n, • Hands-on background in the installation and assembly of HV substation equipment including switchgear, transformers and associated mechanical infrastructure.\n, • Previous experience with GE / GE Vernova equipment would be highly advantageous.\n, • Strong understanding of GIS/AIS equipment installation, mechanical assembly, alignment, inspection and quality requirements.\n, • Good QA/QC knowledge including ITPs, inspections, NCRs, snagging, quality records and handover documentation.\n, • Strong understanding of RAMS, permit-to-work systems and safe systems of work within high-voltage environments.\n, • NGET Competent Person / NSI 6 & NSI 8 certification is desirable but not essential.\n, • Excellent leadership, communication and organisational skills with the ability to effectively manage installation teams and subcontractors.\n\n \n If interested, please apply within or reach out to Harry Arnold at Mint Selection to discuss further.

Electrical Engineer or Senior Engineer \n Plymouth or Exeter \n \n About us \n Hoare Lea is a human-centric and planet-conscious engineering consultancy. We offer intelligent and sustainable solutions to complex design challenges for the built environment throughout the UK and further afield. \n \n We provide a wide range of engineering and consultancy services, including acoustics, air quality, building services (MEP), fire, lighting, security and sustainability to name but a few. Together, our highly skilled teams use technical expertise and problem-solving skills to bring buildings to life. We ensure that whatever the building, its design is outstanding, and its operations meet the needs of the communities it serves. \n \n We are as committed to providing an environment where everyone can realise their unique potential. So, in joining Hoare Lea, you will experience a business that enriches your knowledge, supports your wellbeing, and welcomes your individuality. You’ll have the opportunity to participate in our 9-day fortnight scheme, thriving community groups, varied social and networking events, and extensive professional and technical development schemes. We also offer an extensive benefits package, including private medical cover, an electric vehicle salary sacrifice scheme, stock options, and 25 days of annual leave (increasing with service), alongside flexible and hybrid working. \n \n Whatever your ambitions or circumstances, our aim is to enable everyone to develop their knowledge, give their best, and enjoy what they do. \n \n About the role \n We have an opportunity for an Electrical Engineer or Senior Engineer to play a key role in delivering high quality, sustainable electrical engineering solutions across multiple projects in the built environment. \n \n You will join our Electrical team based in either our Plymouth or Exeter office. \n \n We have a well-established reputation for delivering outstanding design on built environment projects throughout the Southwest and further afield. \n We have maintained an office in Plymouth since 1951, developing a strong regional reputation for award-winning projects. \n \n Our Exeter office opened in January 2022 at Broadwalk House in prestigious Southernhay West. We have brought a global network of excellence to the city by drawing on the expertise of our 1,000+ talented engineers, commissioning agents, and energy analysts. \n \n We are a recognised leader in the built environment, shaping some of the most ambitious and technically demanding projects across the residential, hospitality, leisure, commercial, and complex engineering sectors. \n \n Our work spans cutting-edge healthcare and research facilities, high-performance data centres, critical infrastructure and state-of-the-art manufacturing and technology environments projects that push boundaries and deliver real-world impact. \n \n Driven by a commitment to excellence, we combine innovation, technical expertise, and practical delivery to create solutions that are not only robust and reliable, but forward-thinking and sustainable. Our teams work at the forefront of the industry, collaborating with leading clients across the public and private sectors, both locally and internationally. \n \n Working alongside a range of specialist engineers and consultants, you will be joining a collaborative, knowledgeable, highly engaged team who love what they do, and offer a supportive, flexible, and high-performing work culture. \n \n You will own project deliverables, manage elements of the internal delivery team, and liaise with multidisciplinary colleagues, clients and contractors to ensure holistic, compliant and commercially aware solutions. You will typically lead defined elements and smaller projects (Engineer) or take full lead responsibility for larger schemes and broader client engagement (Senior Engineer). You will be helping to develop junior staff and foster relationships that support future business growth. \n \n In this key and varied role, you can expect to: \n • Take briefs and deliver electrical design work from inception through to completion. \n • Produce electrical calculations, drawings and technical documentation that comply with relevant regulations, design guides and client standards. \n • Ensure quality standards and technical accuracy across deliverables. \n • Coordinate electrical design with other disciplines (MEP and our specialist groups) and third‑party consultants. \n • Review and comment on technical information provided by contractors and sub‑contractors; check site installations against the design intent. \n • Attend and report at design team meetings, client meetings and project meetings. \n • Witness selected testing and commissioning activities and support handover documentation. \n • Manage own workload to meet programme deliverables and report progress to your line manager. \n • Contribute to the professional development of junior colleagues. \n \n Additional responsibilities for Senior Engineer: \n • Develop briefs and take responsibility for delivering a small project or the electrical discipline on a significant/complex scheme. \n • Exercise considerable autonomy and take ownership for technical decisions and project delivery within cost constraints. \n • Delegate, manage and check work undertaken by others; mentor and motivate colleagues across project teams. \n • Play an active role in commercial aspects (scope, risk, cost control) and ensure outputs meet project and budgetary requirements. \n \n About you \n To be successful in this role you’ll need: \n • Degree or equivalent in Electrical/Building Services Engineering; industry membership preferred. \n • Working towards or holding IEng/CEng. \n • Strong technical competence in LV distribution, lighting, earthing/protection and emergency/standby systems; able to produce calculations and drawings. \n • Proficient with industry software (Revit, AutoCAD, Dialux, OM Electrical) and MS Office. \n • Able to work independently: deliver an element of a project (Engineer) or lead discipline/small projects and larger schemes (Senior). \n • Effective communicator with experience coordinating multidisciplinary teams and liaising with clients/contractors. \n • Experience of site checking, witnessing testing/commissioning and reviewing contractor submissions. \n • Demonstrable commitment to meeting programmes and quality standards; commercially aware. \n • Supportive team player who mentors junior staff and pursues continuous professional development (Senior expected to supervise; Engineer to support). \n \n How to apply \n To apply simply complete a CV profile and submit your application, or for further information please contact aureliacherradi@hoarelea.com \n \n If shortlisted, one of our recruitment team will be in touch to arrange an introductory call (about 30 minutes) to discuss the role and your experience in more detail. From there, successful candidates will be invited to attend a panel interview, either via Microsoft Teams or in person at one of our offices. We aim to provide feedback at each stage of the process. \n \n Adjustments and accommodations \n If there are adjustments or accommodations that we can put in place to help you participate and give your best at any stage of the recruitment process (whether relating to disability, neurodivergence or anything else) please let us know. \n \n Data privacy \n We have updated our terms and conditions for candidates, click here to find out more. \n Recruitment agencies \n We have a Preferred Supplier List of trusted partners who assist us when required. We do not acknowledge speculative CVs or unsolicited candidate introductions from agencies not on the list.

Description Join Trant Engineering and help shape the delivery of complex, high-impact projects. Trant Engineering is a leading EPC contractor with a strong reputation for delivering innovative engineering solutions across the UK and internationally. With over 1,000 employees and a £150m turnover, we’re growing—and now looking for an experienced Document Controller to play a key role in our project delivery teams. The Role As a Document Controller you'll responsible for the accurate control, distribution, and storage of project documentation in accordance with company, client, and regulatory requirements. The role supports engineering, construction, and commercial teams by ensuring the correct information is available at the right time to enable safe, efficient, and compliant project delivery across multiple sites. In addition, the role ensures that technical information such as O&M manuals, work instructions, technical reports, and asset information packs. documentation, and processes are organised, up to date, and compliant, enabling efficient project delivery in a regulated infrastructure environment. What You’ll Be Doing 1) Technical Responsibilities - Document Control Receive, log, distribute, and archive project documentation in line with document control procedures. Maintain document registers, transmittals, and audit trails across multiple projects. Ensure correct document naming, numbering, revision control, and approval status. Manage incoming and outgoing correspondence in controlled systems. Assist engineers and technical leads with the preparation, formatting, and issue of technical documents, reports, and correspondence. Produce technical documents including Operation & Maintenance (O&M) manuals in Client specific formats (electronic, hardcopy, USB), technical reports, procedures, work instructions, and asset information packs. 2) Systems Management Operate internal Document Management systems. Apply document workflows, metadata, and permissions as directed. Support continuous improvement of document control processes and digital systems. Support the use of Clients systems, and their administration if required. 3) Project & Contract Support Work closely with Clients, Subcontractors, engineers, project teams, and site teams to ensure timely access to current documents, attending meetings if required. Ensure Subcontractors information is compliant to our Client’s standards, logged and distributed accordingly. Support bid, pre-construction, construction, and handover documentation requirements. Assist with the compilation of handover documentation, including as-built records and O&M manuals. Attend weekly Document Control Team meetings. 4) Compliance & Standards Ensure documentation complies with company standards, client requirements, and regulatory obligations. Support compliance with ISO standards (e.g. ISO 9001, ISO 19650 where applicable). Support internal and external audits, inspections, and client reviews. Escalate document control issues or non-compliance to senior team members. 5) Stakeholder Communication Senior Document Controller Document Control Manager Project Managers / Project Engineers Project Controls / Planning Teams Design Managers / Engineering Managers Engineers & Design Teams (Civil, Mechanical, Electrical, Process) Construction Managers / Site Managers Site Engineers / Supervisors Estimators / Commercial / QS Teams Bid / Proposal Teams HSEQ Teams / Quality Teams 6) Core Values Uphold and promote the Company’s Core Values – Care, Trust, Respect and Sustainability. What We’re Looking For Essential Experience as a Document Controller in engineering, construction, or infrastructure environments. Ability to manage multiple documents, deadlines, and priorities. Desirable Document control or information management certification is advantageous. Experience using EDMS platforms and managing digital workflows. Excellent organisational skills and attention to detail. Good team player, personable character, good communicator. Experience working on multi-site projects. Experience compiling Site Operational Manuals, Information Packs, Databooks and Health & Safety Files. Why Join Trant? At Trant, we offer the opportunity for career development and progression within a professional working environment, and we strongly encourage employees to gain professional qualifications and fully support individuals on their journeys towards chartership. Work on complex, meaningful engineering projects Be part of a collaborative, multi-disciplinary team Strong pipeline of secured work and career progression opportunities Innovative environment with in-house design and manufacturing capability Long-term secured framework work Clear career development opportunities Strong safety and wellbeing culture Competitive salary and benefits package Our company benefits package includes. Competitive salary Company car or car allowance (some levels) Mentored support within our ‘Career Development Association’, to work towards chartership 24 days holiday (increasing with service) + 8 bank holidays Options to buy additional holiday via salary sacrifice Company Pension Scheme Flexible working based on a ‘core hours’ system 1 x Professional Membership paid annually Hybrid working Employee Assistance Program Free onsite parking Bike to Work Scheme Discretionary annual bonus Ready to take the next step in your planning career? Apply now and be part of something bigger

Astute's Renewables team is partnered with an established and expanding business, who own and run a portfolio of anaerobic digestion plant. They are looking to recruit a Maintenance Engineer for their site in Exeter. The Maintenance Engineer role comes with a competitive salary + bonus, and excellent benefits package. If you have experience working as a Maintenance Engineer in a heavy processing environment and are looking to work for an organisation that is passionate about renewable energy, then upload your CV to Responsibilities and duties of the Maintenance Engineer role Reporting to the Regional Plant Manager you will: Be Responsible for all operational equipment and machinery including, but not limited to front end processing, pumping technology, digester and ancillary equipment, heating circuit and pasteurisation processes Follow, maintain and improve FIIX for all PPM's, input and detail any repairs or services on machinery to enhance a maintenance regime against each piece of equipment. Review and or provide thorough method statements, risk assessments and permit to work for non-routine maintenance tasks Build and improve on a thorough planned preventative maintenance program Support across three sites within their portfolio as and when needed Provide basic training, support and mentoring for site operatives Deliver planned improvements and refurbishments as part of the planned maintenance programme Ensure control measures and SSW (safe systems of work) are in place when undertaking any maintenance task Maintain high standards of housekeeping and insure a safe and tidy work areas. Undertake any training requirements as identified by your line manager to support you in your role. Be part of an on-call rota Other duties as required Professional qualifications We are looking for someone with the following: A recognised engineering qualification or demonstratable experience IOSH is desired Compex and ATEX is desired Telehandler licence or experience A full UK Driving Licence is essential Personal skills The Maintenance Engineer role would suit someone who is: Experience working in anaerobic digestion or a similar heavy processing environment such as water treatment, food manufacturing ect Practical environmental and working safely knowledge Electrical competence Computer literate Mechanical hands-on Engineering Essential Working Knowledge of substrate pumps Confined Space Training Experience of using and fixing pumps, valves, screw conveyors, gearbox drive units, heating circuits, Macerators, Hammermills and Mixers Salary and benefits of the Maintenance Engineer role Competitive salary depending on experience Company Bonus Company Pension Other benefits discussed at interview #LI-AR1 INDREN Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful

Maintenance Technician Location: Exeter | Full-Time: 37.5 Hours | Reed Engineering is recruiting on behalf of a leading manufacturing company in Exeter for a Maintenance Technician. Reporting to the Engineering Manager, you will be responsible for maintaining plant equipment, carrying out planned and reactive maintenance, and ensuring maximum uptime across the site. Shift Pattern (3-Week Rotation) 6:00am - 2:00pm 8:00am - 4:00pm 10:00am - 6:00pmKey Responsibilities: Complete planned preventative maintenance (PPM) and respond to breakdowns. Diagnose and repair mechanical and electrical faults. Carry out boiler maintenance and checks. Maintain steam, condensate, compressed air, and pressure systems. Issue Permits to Work and Isolation Certificates. Ensure compliance with Health & Safety, COSHH, and environmental standards. Record maintenance activities and manage spare parts requirements. Support contractors and production teams when required.If you're a Maintenance Engineer looking for your next opportunity, and would like to find out more, Apply Below

Role: Experienced Mechanical Engineer Sector: Renewable energy, Hydrogen, Carbon, Oil + Gas Location: Exeter Salary: £ we will pay for the right talent Benefits: cash plan, pension 5%, 25 days holidays, critical illness, income protection, cycle to work Full-time: 40 hours per week, Monday - Friday Growth Plans: Not only are we established but we also have huge growth plans for 2026 and although the team is a flat structure, we hope you would be able to become a team leader! About the role: In this role you will support the design and development activities of the Mechanical Engineering Department by delivering engineering projects and tools through the prototyping, testing, and design validation stages. The role is responsible for evaluating product performance, identifying opportunities for improvement, and implementing design modifications where required. Key Responsibilities: • Apply sound engineering principles, analytical techniques, and industry standards to perform accurate calculations that support product design, development, performance verification, and compliance requirements. • Evaluate design assumptions, identify potential risks, and provide technically robust recommendations to support decision-making throughout the product lifecycle. • Develop clear and comprehensive technical specifications for engineering projects, products, and tooling, ensuring requirements are accurately defined, achievable, and aligned with customer, regulatory, and business needs. • Produce and maintain accurate quality assurance documentation, test records, inspection reports, and compliance evidence to support internal quality processes and external customer requirements. • Participate actively in product development reviews with the Engineering Manager, providing technical insight, progress updates, risk assessments, and recommendations to support informed project decisions. • Conduct inspections of products and assemblies during manufacture and development to verify compliance with drawings, specifications, quality standards, and project requirements. • Respond professionally and accurately to client technical enquiries, providing expert advice, troubleshooting support, and practical solutions to engineering challenges. • Prepare, review, and maintain technical literature, including operating instructions, technical manuals, product specifications, test reports, and engineering documentation. • Maintain comprehensive and organised technical files, ensuring all design records, calculations, drawings, specifications, test results, and validation documentation are controlled, current, and readily accessible. • Support traceability, compliance, and knowledge retention through effective document management practices. • Interpret test data and provide evidence-based recommendations for product acceptance, modification, or further investigation. • Identify opportunities for product enhancement, cost reduction, improved manufacturability, increased reliability, and enhanced customer satisfaction. Required skills: Fluency with 3D CAD tools (preferably Autodesk Inventor). Engineering calculations including pressure containment, mechanical strength, and thermal performance Experience managing technical documenta on and change control in a PLM system. Lead full-cycle design: requirements capture, CAD modelling, calculations, tolerance analysis Prototype, assemble, and validate performance Oversee qualification testing for environmental and field compliance Manage BOMs, ECNs, QA records, and specifications in line with QMS Educated to degree level or above in related subject. Able to demonstrate previous experience of working as a Mechanical Engineer and being able to use technical judgement when translating design concepts into practical engineering solutions. Experience of successfully working to project deadlines, whilst demonstrating a systematic working approach to record keeping and adherence to quality management standards. Excellent communication skill with the ability to communicate complex technical information clearly and accurately to both technical and non-technical audiences. Competent IT knowledge and skills Fluent in English, verbal and written. UK full valid driving licence. Desired skills: Knowledge of electrical / fibre optic processes. Familiarity with design for manufacture (DfM) and design for assembly (DfA). Exposure to oilfield tool design, high-pressure environments, material selection for harsh environments FEA, material selection on for harsh environments Hands-on prototyping or workshop experience

The Work Shop are delighted to be recruiting for an Area Sales Manager for the South West region, selling to the Electrical Wholesale Market. (Fire lighting and Alarms). Our client is a recognised manufacturer and distributor of electrical products and lighting, who are looking for an experience hunter sales person to build successful relationships with electrical wholesale market and building contractors. In return our client is offering a competitive salary of £40,000- £45,000 per annum with a company car for the Area Sales manager to the Electrical Wholesale for the South West region. The Company has a profit related bonus at the end of the financial year based on company and personal performance. The successful Area Sales Manager Will be based in or around South West Reports To: Sales Director Primary Responsibilities for Area Sales Manager: Develop and implement sales strategy in support of business objectives and sales forecast within the wholesale/contractor, with consideration to new product launches, Knowledge of Lighting and or Fire Alarms. Establish strong working relationships with existing key customer accounts and work closely with these customers to effectively service their requirements and identify areas for mutual profitable growth. Maximise sales opportunities, proactively seek avenues for new business and convert these into profitable sales. Plan, forecast and report upon sales activity within your area against KPI’s. Work collaboratively and develop relationships with all internal departments and stakeholders. Complete designs and attend site visits for customers as part of end to end service. What we're looking for the Area Sales Manager role: Experience of Lighting and or Fire Alarms within an electrical wholesale / contractor environment with responsibility for Wholesale or Contractor accounts. Successful sales history. Ability to influence and communicate effectively at all levels. A professional, self-motivated and passionate person with drive and ambition. * Full UK driving licence. The successful candidate will be offered a competitive salary, access to the company’s profit share scheme and a company pension. Company Car, Expenses, Phone. If you have worked within sales in the electrical wholesale or Fire electrical market please do not hesitate to contact The Work Shop today to discuss the role. Electrical Wholesale, Lighting, Site Lighting, cables, Fire Alarms, Contract accounts, BDM, Sales, Territory Sales, Fire Lighting South West , Devon , Cornwall, Somerset, Bristol, Bath, Bournemouth, Swindon

Description Join Trant Engineering and help shape the delivery of complex, high-impact projects. Trant Engineering is a leading EPC contractor with a strong reputation for delivering innovative engineering solutions across the UK and internationally. With over 1,000 employees and a £150m turnover, we’re growing—and now looking for an Technical Administrator to play a key role in our project delivery teams. The RoleThe Technical Administrator provides essential administrative and coordination support to engineering, technical, and project teams across multiple water and energy projects. The role ensures technical information, documentation, and processes are organised, up to date, and compliant, enabling efficient project delivery in a regulated infrastructure environment. What You’ll Be Doing Technical & Engineering Support Provide day-to-day administrative support to engineering and technical teams across multiple projects. Assist engineers and technical leads with the preparation, formatting, and issue of technical documents, reports, and correspondence. Maintain records of technical deliverables, approvals, and actions. Documentation & Information Management Support document control activities, including document registers, transmittals, and tracking of revisions. Ensure technical documents are correctly filed, version-controlled, and accessible in document management systems. Liaise with Document Controllers to ensure alignment with document control procedures. Coordination & Communication. Act as a point of contact for technical information requests within the project team. Support communication between design teams, project teams, site teams, and external stakeholders. Attend weekly Document Control Team meetings. Project & Compliance Support Assist with tracking technical deliverables against project programmes and milestones. Support compliance with company procedures, client requirements, and regulatory obligations. Assist with preparation for audits, inspections, and client reviews. General Administration Maintain trackers, logs, and schedules related to technical activities. Support onboarding of new team members with systems, processes, and documentation. Provide general administrative support to the project or engineering function as required Key Interfaces Engineers (Civil, Mechanical, Electrical, Process, Instrumentation) Engineering / Technical Managers. CAD / BIM Teams Project Managers / Project Engineers Construction / Site Teams Commissioning Teams Document Controllers / Senior Document Controllers / Document Control Manager Project Support / Administration Teams Client Project Teams Regulatory Bodies / Asset Owners Subcontractors & Suppliers Design Consultants Core Values Uphold and promote the Company’s Core Values – Care, Trust, Respect and Sustainability. What We’re Looking For Essential Experience in an administrative, technical support, or project support role within engineering, construction, or infrastructure environments. Strong organisational skills with the ability to manage multiple tasks and priorities. Good written and verbal communication skills. Proficiency in Microsoft Office (Word, Excel, Outlook) and document management systems. Attention to detail and a structured, methodical approach to work. Desirable NVQ, HNC/HND, Degree, or equivalent experience in Business Administration, Engineering Support, Construction Management, or a related discipline Experience in water and/or energy sector projects. Familiarity with document control processes and EDMS platforms (e.g. Aconex, Viewpoint, Asite, SharePoint). Basic understanding of engineering or technical documentation. Experience supporting multi-site projects or framework contracts. Why Join Trant? At Trant Engineering, we deliver complex, high-value engineering and construction projects across the UK. From process and water treatment to energy infrastructure upgrades, we play a key role in delivering and protecting critical national infrastructure – shaping the systems that communities and industries rely on every day. Our teams design and deliver full EPC solutions, combining technical excellence with practical, hands-on delivery. We offer end-to-end capabilities – from concept and design through to manufacturing, construction and commissioning utilising a continually evolving in-house expertise. This means you’ll work on projects that are varied, challenging and genuinely impactful. Our multi-disciplinary teams bring together specialists in civil, mechanical, electrical, process, instrumentation, and control & automation engineering, alongside our in-house manufacturing of control panels, MCCs, PLCs and SCADA systems. With over 1,000 people and a strong, growing pipeline of work, it’s an exciting time to join Trant. We are committed to helping our people succeed through our Career Development Association, providing structured support, mentoring and clear pathways to help you reach your full potential. Whether you’re starting out or looking to take your next career step, Trant offers the chance to develop, progress and make a real difference. Our company benefits package includes. Competitive salary. Company car or car allowance (some levels.) Mentored support within our ‘Career Development Association’, to work towards chartership. 24 days holiday (increasing with service) + 8 bank holidays. Options to buy additional holiday via salary sacrifice. Company Pension Scheme. Flexible working based on a ‘core hours’ system. 1 x Professional Membership paid annually. Hybrid working. Employee assistance program. Free onsite parking. Bike to Work scheme. Discretionary annual bonus. Ready to take the next step in your career? Apply now and be part of something bigger

Mechanical Contracts Manager | Building Services | South West | £60,000£70,000 + Car or Car Allowance + Benefits Package An established Mechanical & Electrical Building Services contractor operating across the South West is looking to appoint an experienced Mechanical Contracts Manager to join its regional delivery team.The company delivers a varied portfolio of mechanical and M&E projects across healthcare, education, commercial and specialist environments, with typical project values ranging from approximately £500,000 to £3 million.The business has built a strong reputation across the region and offers the stability of an established contractor, a strong pipeline of work and the opportunity to take genuine ownership of projects from pre-construction through to completion.This is an excellent opportunity for an experienced Mechanical Contracts Manager or Senior Mechanical Project Manager looking to build a long-term career within the South West, working on substantial and technically interesting projects within a supportive and collaborative environment.The successful candidate will be joining a business that values experience, trust and responsibility, with genuine scope to develop within the company as the business continues to grow.The RoleThe Mechanical Contracts Manager will take responsibility for the successful delivery of mechanical building-services projects across the South West.You will manage projects from pre-construction through to completion and handover, working closely with clients, consultants, main contractors, commercial teams and site-based delivery staff.The role will suit someone who is comfortable taking full ownership of project delivery, commercial performance, programme, client relationships and the coordination of internal and external teams.The Ideal CandidateThe successful candidate will have strong Mechanical Building Services project delivery experience, ideally gained with a Mechanical or M&E Building Services contractor.You should have:Previous experience within a senior mechanical project or contracts management positionA strong understanding of mechanical building-services installationsExperience managing projects from pre-construction through to completionGood commercial awarenessStrong client and main-contractor relationship skillsGood organisational and communication abilitiesThe ability to manage multiple projects, priorities and deadlinesA proactive and commercially focused approach to project deliveryThis position would suit an experienced Mechanical Project Manager looking to step into a broader Contracts Management role, or an established Mechanical Contracts Manager seeking a long-term opportunity with a respected South West contractor.RemunerationThe successful candidate will receive:£60,000£70,000 basic salary plus Car or car allowance, and benefits packageThe final package will reflect the successful candidates experience and background.Next StepsIf you are an experienced Mechanical Contracts Manager or Senior Mechanical Project Manager with relevant Mechanical Building Services experience and would like to be considered for this exciting opportunity, please apply with an up-to-date CV or contact Rob Green at David Leslie Ltd for a confidential and informal discussion.This role would suit candidates currently working as a:Mechanical Contracts ManagerMechanical Project ManagerSenior Mechanical Project ManagerM&E Contracts ManagerM&E Project ManagerMEP Project ManagerTPBN1_UKTJ

We are looking for a Chief Engineer (STCW A-III/2, unlimited) to join our team, starting in the shipyard where our new vessel is being built. • The required starting date would be October 2026 in the shipyard in Vigo, Spain., • Our new vessel will be a 75m Sailing (DynaRig system) special-purpose, Ice class PC7 vessel, propulsion: two E-Motors, dual-prop (CPP) driven, powered by 4 pcs dual-fuel (MeOH and MGO) engines, 4 pcs FC (fuel cells) run on compressed H2, Battery pack with the ability to recharge from props (regeneration), solar panels, all connected on DC bus and water cooled. The vessel is Dutch flagged and is maintained in DNV class, subject to regular surveys and inspections., • The vessel delivery is planned for October 2027, • Monitor the building of the new vessel in collaboration with the GP hired supervision team of OSM Thome., • Attend meetings with shipyard, site and remote teams on the new build progress., • Familiarise yourself with the new ship systems and assist in the planned maintenance system for the new build. Responsible to the Master for: • Safe operation and maintenance of engine plant and equipment., • Follow the Safety Management System of Greenpeace., • Safe watch keeping of engine plant and equipment at sea and in port in accordance with STCW Ch VIII., • Safe operation and maintenance of all mechanical and electrical equipment outside the engine room., • Supervising the maintenance of rigid hull inflatable boats (rhibs) and outboard engines and ensuring technical readiness of rhibs for Campaigns., • Supervising the work of all engine staff including out board mechanics and fitter / welder., • Set-up of engine room watches at sea and in port., • Issue clear Standing Instructions to engine staff for watch keeping, bunkering, and emergency engine procedures., • Implement Master’s instructions on safe working practice and shipboard environmental policy in the engine room., • Ensuring that there are no illegal discharges of oil, garbage, sewage from the engine room in contravention of the MARPOL Convention as amended., • Ensuring that the Oil record Book is properly maintained as per the instructions contained therein., • Ensuring that the Oily Water Separator (OWS) and Oil Detection Monitor (ODM) where fitted are regularly tested and any illegal connections immediately removed and reported to the Master and Technical Manager., • Ensures that the fleet management software where provided is regularly updated for planned maintenance, inventory control, spare and consumable requisitions., • Ensure that required spares are requisitioned in time and followed up with the Technical Manager., • Maintain engine logbooks and produce monthly reports to the Technical Manager., • Assign work and responsibilities to the engine room staff., • Ensuring that machinery which is not in regular use are periodically tested and maintained., • Confer with the Technical Manager regarding procedures and policies for the engine room and all other equipment., • Advise the Master on arrival of the condition of all equipment and to confer with the Technical Manager on priorities of work in port., • Confer with the Master daily when at sea and report any deficiencies immediately., • Maintain accountability and logbooks of all mechanical and electrical spares, fuel/water levels and spares used., • Provide a written report each month or at the end of the voyage, whichever precedes, and cover general performance of the engine room and equipment; any problem areas and any recommendation for replacement / maintenance / additional equipment., • Adhere strictly to bunker procedures, which should be prominently displayed and record pre bunker meetings in the Engine log book., • Request Master to post deck personnel temporarily to the engine room when required., • Before entry and departure port all engine controls are tested and records of tests entered in the engine log book, • Participate in Campaigns and training., • Valid STCW certificates for a Chief Engineer (STCW A-III/2, unlimited), • Desirable to have experience with methanol / LFL fuel, IGF Code certified., • Desirable to have previous experience in a shipyard for vessel take over., • A long term team player with good interpersonal skills that can work with a set of diverse crew., • Support for and belief in the Greenpeace core aims and values. Greenpeace is a global campaigning network. It comprises 25 independent national/regional organisations, and a coordinating organisation, Greenpeace International. Greenpeace uses peaceful, creative confrontation to expose global environmental problems, and develop solutions for a green and peaceful future. Our goal is to ensure the ability of the earth to nurture life in all its diversity. That means we want to: • protect biodiversity in all its forms, • prevent pollution and abuse of the earth’s ocean, land, air and fresh water, • end all nuclear threats, • promote peace, global disarmament and non-violence CLOSING DATE: Monday 31 August 2026, 23:59* (CEST) #J-18808-Ljbffr

Astute's Renewables team is partnered with an established and expanding business, who own and run a portfolio of anaerobic digestion plant. They are looking to recruit a Maintenance Engineer for their site in Exeter. Do you have the following skills, experience and drive to succeed in this role Find out below. The Maintenance Engineer role comes with a competitive salary + bonus, and excellent benefits package. If you have experience working as a Maintenance Engineer in a heavy processing environment and are looking to work for an organisation that is passionate about renewable energy, then upload your CV to Responsibilities and duties of the Maintenance Engineer role Reporting to the Regional Plant Manager you will: Be Responsible for all operational equipment and machinery including, but not limited to front end processing, pumping technology, digester and ancillary equipment, heating circuit and pasteurisation processes Follow, maintain and improve FIIX for all PPM's, input and detail any repairs or services on machinery to enhance a maintenance regime against each piece of equipment. Review and or provide thorough method statements, risk assessments and permit to work for non-routine maintenance tasks Build and improve on a thorough planned preventative maintenance program Support across three sites within their portfolio as and when needed Provide basic training, support and mentoring for site operatives Deliver planned improvements and refurbishments as part of the planned maintenance programme Ensure control measures and SSW (safe systems of work) are in place when undertaking any maintenance task Maintain high standards of housekeeping and insure a safe and tidy work areas. Undertake any training requirements as identified by your line manager to support you in your role. Be part of an on-call rota Other duties as required Professional qualifications We are looking for someone with the following: A recognised engineering qualification or demonstratable experience IOSH is desired Compex and ATEX is desired Telehandler licence or experience A full UK Driving Licence is essential Personal skills The Maintenance Engineer role would suit someone who is: Experience working in anaerobic digestion or a similar heavy processing environment such as water treatment, food manufacturing ect Practical environmental and working safely knowledge Electrical competence Computer literate Mechanical hands-on Engineering Essential Working Knowledge of substrate pumps Confined Space Training Experience of using and fixing pumps, valves, screw conveyors, gearbox drive units, heating circuits, Macerators, Hammermills and Mixers Salary and benefits of the Maintenance Engineer role Competitive salary depending on experience Company Bonus Company Pension Other benefits discussed at interview #LI-AR1 INDREN Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. xrnqpay We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful

About The Role Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? We help our clients safeguard the water supply, improve environmental performance and manage demand for future generations. We enhance and extend asset life, ensuring compliance with water quality and environmental standards. Were problem solvers with over 140 years of combined experience in engineering and infrastructure. This role will be within ourMEICA and capital maintenance team. Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. Want to be a part of it? What will you be doing? We're seeking an experienced Operations Manager to drive the growth of our High Voltage (HV), EV Charging and Gas Distribution Network (GDN) services across the Energy and Water sectors. This senior leadership role combines business development, operational management and strategic account growth. You'll be responsible for expanding existing and newly awarded frameworks, strengthening client relationships, identifying market opportunities and converting pipeline into sustainable revenue growth. While retaining accountability for operational performance, your primary focus will be business growth, framework expansion, service development and people leadership. What you'll be doing • Lead the growth of HV, EV Charging and GDN services across key frameworks and markets., • Develop and deliver business growth strategies across regulated utilities, power and infrastructure sectors., • Identify and convert opportunities in reliability maintenance, asset management, capital maintenance and specialist electrical services., • Build strong client, stakeholder and framework partner relationships., • Lead strategic work-winning activities, including client engagement, solution development and bid support., • Collaborate across the wider business to maximise growth and cross-selling opportunities., • Provide leadership to operational teams, developing capability, succession plans and a high-performance culture., • Ensure resources, systems and delivery models support sustainable growth and operational excellence., • Monitor market trends and framework performance to identify emerging opportunities., • Champion safety, compliance, quality and customer excellence across all activities.Success will be measured through revenue growth, framework expansion, opportunity conversion, operational performance, client retention and people development. What You'll Bring • Do you have senior leadership experience within the utilities, power, engineering, or infrastructure sectors, with a proven track record of delivering revenue growth, expanding frameworks, securing new business opportunities, and implementing business growth strategies?, • Have you successfully led work-winning activities, client engagement, and strategic bids, while developing strong client relationships that drive repeat business and framework growth?, • Do you possess strong commercial acumen, including experience managing revenue, margins, pricing, risk, and overall business performance, alongside a solid understanding of HV infrastructure, EV charging, GDN, asset management, reliability maintenance, capital maintenance services, and framework environments?, • Are you experienced in leading multidisciplinary operational and commercial teams, driving organisational change, continuous improvement, governance, accountability, and cultural development, with the ability to coach high-performing teams and influence senior stakeholders and decision-makers at all levels?Whats in it for you? We offer a range of benefits designed to support your life in and out of work, some of which include; • Contributory pension scheme, • Online GP service, 24 hours a day, 365 days a year, • Employee assistance programme, • My Rewards portal, access to 1000s of retail discounts, • Life assurance, • Cycle to work, salary finance and give as you earn schemes, • Enhanced maternity, paternity leave and adoption leave, • Reward and recognition schemeIn addition, this role offers;, • Company car and fuel card with a range of EV and hybrid vehicles to choose from, • My Car Choice our salary sacrifice EV/ Hybrid car scheme, • 25 days annual leave plus bank holidays, • Recommend a friend get rewarded for introducing people to us! About us We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. Were one of the Top 100 UK companies actively supporting and recruiting veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. • Were responsible and go further for our people, clients, communities and the planet, • Were open and seek new and better ways of exceeding expectations, • Were together and as one team; the whole is greater than the sum of the parts, • Were ambitious and embrace opportunity, to lead essential infrastructure services for lifeWhether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development. Its an exceptional time to be a part of M Group. Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3rd party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding. #MGroupW #LI-LK1INDREG JBRP1_UKTJ

Astute's Renewables team is partnered with an established and expanding business, who own and run a portfolio of anaerobic digestion plant. They are looking to recruit a Maintenance Engineer for their site in Exeter. Do you have the following skills, experience and drive to succeed in this role Find out below. The Maintenance Engineer role comes with a competitive salary + bonus, and excellent benefits package. If you have experience working as a Maintenance Engineer in a heavy processing environment and are looking to work for an organisation that is passionate about renewable energy, then upload your CV to Responsibilities and duties of the Maintenance Engineer role Reporting to the Regional Plant Manager you will: Be Responsible for all operational equipment and machinery including, but not limited to front end processing, pumping technology, digester and ancillary equipment, heating circuit and pasteurisation processes Follow, maintain and improve FIIX for all PPM's, input and detail any repairs or services on machinery to enhance a maintenance regime against each piece of equipment. Review and or provide thorough method statements, risk assessments and permit to work for non-routine maintenance tasks Build and improve on a thorough planned preventative maintenance program Support across three sites within their portfolio as and when needed Provide basic training, support and mentoring for site operatives Deliver planned improvements and refurbishments as part of the planned maintenance programme Ensure control measures and SSW (safe systems of work) are in place when undertaking any maintenance task Maintain high standards of housekeeping and insure a safe and tidy work areas. Undertake any training requirements as identified by your line manager to support you in your role. Be part of an on-call rota Other duties as required Professional qualifications We are looking for someone with the following: A recognised engineering qualification or demonstratable experience IOSH is desired Compex and ATEX is desired Telehandler licence or experience A full UK Driving Licence is essential Personal skills The Maintenance Engineer role would suit someone who is: Experience working in anaerobic digestion or a similar heavy processing environment such as water treatment, food manufacturing ect Practical environmental and working safely knowledge Electrical competence Computer literate Mechanical hands-on Engineering Essential Working Knowledge of substrate pumps Confined Space Training Experience of using and fixing pumps, valves, screw conveyors, gearbox drive units, heating circuits, Macerators, Hammermills and Mixers Salary and benefits of the Maintenance Engineer role Competitive salary depending on experience Company Bonus Company Pension Other benefits discussed at interview #LI-AR1 INDREN Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. xsngvjr We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful

Business Development Manager M&E Retail Installations Location: Remote with National Travel Salary: Up to £65,000 DOE + £5,000 Car Allowance + Commission The Opportunity Red Rock Consultants are recruiting on behalf of a leading M&E contractor with an excellent reputation for delivering mechanical and electrical installation projects across the UK. Due to continued growth, they are looking to appoint an experienced Business Development Manager to drive new business across the retail sector. This is a national, field-based role with the flexibility to work remotely, alongside occasional visits to the Sheffield office for team meetings and collaboration. Key Responsibilities • Generate new business opportunities across the UK retail market., • Develop relationships with retailers, principal contractors, fit-out specialists and M&E contractors., • Identify opportunities for M&E installation, refurbishment and roll-out projects., • Build and manage a healthy sales pipeline from initial enquiry through to contract award., • Attend client meetings, networking events and industry exhibitions., • Prepare proposals, presentations and commercial quotations., • Work collaboratively with estimating and operational teams to ensure successful project delivery., • Achieve and exceed agreed sales targets., • Maintain accurate CRM records and sales forecasts., • Represent the business professionally within the marketplace. About You We're looking for an experienced Business Development Manager / Sales Manager with a proven track record of winning new business within the M&E industry. You will ideally have experience selling M&E installation services directly to retailers, or M&E services via principal contractors, fit-out contractors or specialist subcontractors. Please apply or contact Emma on 0121 212 0234 to find out more. JBRP1_UKTJ

Mechanical Contracts Manager | Building Services | South West | £60,000£70,000 + Car or Car Allowance + Benefits Package An established Mechanical & Electrical Building Services contractor operating across the South West is looking to appoint an experienced Mechanical Contracts Manager to join its regional delivery team. Have you got the right qualifications and skills for this job Find out below, and hit apply to be considered. The company delivers a varied portfolio of mechanical and M&E projects across healthcare, education, commercial and specialist environments, with typical project values ranging from approximately £500,000 to £3 million. The business has built a strong reputation across the region and offers the stability of an established contractor, a strong pipeline of work and the opportunity to take genuine ownership of projects from pre-construction through to completion. This is an excellent opportunity for an experienced Mechanical Contracts Manager or Senior Mechanical Project Manager looking to build a long-term career within the South West, working on substantial and technically interesting projects within a supportive and collaborative environment. The successful candidate will be joining a business that values experience, trust and responsibility, with genuine scope to develop within the company as the business continues to grow. The Role The Mechanical Contracts Manager will take responsibility for the successful delivery of mechanical building-services projects across the South West. You will manage projects from pre-construction through to completion and handover, working closely with clients, consultants, main contractors, commercial teams and site-based delivery staff. The role will suit someone who is comfortable taking full ownership of project delivery, commercial performance, programme, client relationships and the coordination of internal and external teams. The Ideal Candidate The successful candidate will have strong Mechanical Building Services project delivery experience, ideally gained with a Mechanical or M&E Building Services contractor. You should have: Previous experience within a senior mechanical project or contracts management position A strong understanding of mechanical building-services installations Experience managing projects from pre-construction through to completion Good commercial awareness Strong client and main-contractor relationship skills Good organisational and communication abilities The ability to manage multiple projects, priorities and deadlines A proactive and commercially focused approach to project delivery This position would suit an experienced Mechanical Project Manager looking to step into a broader Contracts Management role, or an established Mechanical Contracts Manager seeking a long-term opportunity with a respected South West contractor. Remuneration The successful candidate will receive: £60,000£70,000 basic salary plus Car or car allowance, and benefits package The final package will reflect the successful candidates experience and background. xsngvjr Next Steps If you are an experienced Mechanical Contracts Manager or Senior Mechanical Project Manager with relevant Mechanical Building Services experience and would like to be considered for this exciting opportunity, please apply with an up-to-date CV or contact Rob Green at David Leslie Ltd for a confidential and informal discussion. This role would suit candidates currently working as a: Mechanical Contracts Manager Mechanical Project Manager Senior Mechanical Project Manager M&E Contracts Manager M&E Project Manager MEP Project Manager

JAM Recruitment Ltd in Devon is seeking a Contracts Manager to oversee electrical installation and refurbishment projects within the retail sector. This permanent role offers a salary of £55,000–£65,000, plus a full benefits package, and requires travel to Cardiff and Swindon.

RGB Recruitment Ltd is seeking an experienced Electrical Project Manager based in Exeter. The successful candidate will oversee a diverse range of electrical projects across the South West, ensuring safe delivery on time and within budget. Applicants should have proven experience and a strong techni

As Electrical Project Manager, you will be responsible for the successful delivery of multiple projects across Devon, Somerset, and Dorset. Previous experience as an Electrical Project Manager or contracts manager or in a similar management role. If you are an experienced Electrical Project Manager

12 Month Contract (initially) Up to £70 per hour umbrella (Inside IR35) Full time on site Job Role: Ensure the delivery of site quality by managing, providing advice and support, and witnessing the installation and commissioning process through construction works in the submarine refit complex. Primary focus will be Electrical activity. You will be accountable to the Lead Construction Manager for day-to-day planning matters. You will assist the construction and project team by providing advice and communicating with contractors and relevant internal stakeholders to resolve site issues / Technical Queries during construction in line with contract timescales. You will ensure the contractor adheres to the Scope of Works and Change Requests. You will undertake and record inspections to ensure adherence to scope and integrated test plans. The post operates as part of the Major Infrastructure Projects Business Unit. Key Responsibilities: • Ensure the delivery of site Quality by managing, providing advice and support, and witnessing the installation and commissioning process through construction works in the submarine refit complex., • Participate in the problem solving for development of technical solutions to deficiencies or in the development of designs to overcome installation problems., • You will be accountable to the Lead Construction Manager for day-to-day planning matters., • You will assist the construction and Project team by providing advice and communicating with contractors and relevant internal stakeholders to resolve site issues / Technical Queries during construction in line with contract timescales., • You will ensure the contractor adheres to the Scope of works and Change requests., • You will undertake and record inspections to ensure adherence to scope and integrated test plans., • Supervise and provide on-the-job guidance to the junior staff., • Make effective use of Learn from Experience information to develop and disseminate knowledge in relation to practical engineering and to maintain a record of development to substantiate the skills achieved., • Support development, construction, installation, commissioning, operation and maintenance of Facilities to ensure that they comply with the design intent and DNSP's for Nuclear related Works, together with all relevant Local and National Regulations and Legislation., • Support the on-site inspection of DRDL assets for their construction, maintenance and modification, • Maintain familiarity with DRDL procedures used within Facilities Engineering. Key Experience and Attributes: • Ideally has electrical power experience, • Needs to have some (2 years+) experience in a site-based role not necessarily as a Resident Engineer., • Be confined space trained or prepared to complete confined space training and entering the subways., • Experience of design of electrical building services, to include fire detection and alarm systems, industrial lighting and emergency lighting, site broadcast (PA) and HVAC, • The post holder must be able to demonstrate relevant knowledge and skills required in the resolution of onsite electrical issues of complex systems throughout the construction lifecycle., • Provide advice based on on-site experience to the designers to enable them to develop the design, • Sound understanding of Company and departmental procedures relating to Design, Health & Safety and Quality requirements, and ability to manage projects in accordance with these procedures., • Working knowledge of relevant engineering office computer applications, • Ideally experience of the design support to construction, operation, refit/repair of conventional and nuclear submarines and/or facilities JBRP1_UKTJ

Description Join Trant Engineering and help shape the delivery of complex, high-impact projects. Trant Engineering is a leading EPC contractor with a strong reputation for delivering innovative engineering solutions across the UK and internationally. With over 1,000 employees and a £150m turnover, we’re growing—and now looking for an Technical Administrator to play a key role in our project delivery teams. The RoleThe Technical Administrator provides essential administrative and coordination support to engineering, technical, and project teams across multiple water and energy projects. The role ensures technical information, documentation, and processes are organised, up to date, and compliant, enabling efficient project delivery in a regulated infrastructure environment. What You’ll Be Doing Technical & Engineering Support Provide day-to-day administrative support to engineering and technical teams across multiple projects. Assist engineers and technical leads with the preparation, formatting, and issue of technical documents, reports, and correspondence. Maintain records of technical deliverables, approvals, and actions. Documentation & Information Management Support document control activities, including document registers, transmittals, and tracking of revisions. Ensure technical documents are correctly filed, version-controlled, and accessible in document management systems. Liaise with Document Controllers to ensure alignment with document control procedures. Coordination & Communication. Act as a point of contact for technical information requests within the project team. Support communication between design teams, project teams, site teams, and external stakeholders. Attend weekly Document Control Team meetings. Project & Compliance Support Assist with tracking technical deliverables against project programmes and milestones. Support compliance with company procedures, client requirements, and regulatory obligations. Assist with preparation for audits, inspections, and client reviews. General Administration Maintain trackers, logs, and schedules related to technical activities. Support onboarding of new team members with systems, processes, and documentation. Provide general administrative support to the project or engineering function as required Key Interfaces Engineers (Civil, Mechanical, Electrical, Process, Instrumentation) Engineering / Technical Managers. CAD / BIM Teams Project Managers / Project Engineers Construction / Site Teams Commissioning Teams Document Controllers / Senior Document Controllers / Document Control Manager Project Support / Administration Teams Client Project Teams Regulatory Bodies / Asset Owners Subcontractors & Suppliers Design Consultants Core Values Uphold and promote the Company’s Core Values – Care, Trust, Respect and Sustainability. What We’re Looking For Essential Experience in an administrative, technical support, or project support role within engineering, construction, or infrastructure environments. Strong organisational skills with the ability to manage multiple tasks and priorities. Good written and verbal communication skills. Proficiency in Microsoft Office (Word, Excel, Outlook) and document management systems. Attention to detail and a structured, methodical approach to work. Desirable NVQ, HNC/HND, Degree, or equivalent experience in Business Administration, Engineering Support, Construction Management, or a related discipline Experience in water and/or energy sector projects. Familiarity with document control processes and EDMS platforms (e.g. Aconex, Viewpoint, Asite, SharePoint). Basic understanding of engineering or technical documentation. Experience supporting multi-site projects or framework contracts. Why Join Trant? At Trant Engineering, we deliver complex, high-value engineering and construction projects across the UK. From process and water treatment to energy infrastructure upgrades, we play a key role in delivering and protecting critical national infrastructure – shaping the systems that communities and industries rely on every day. Our teams design and deliver full EPC solutions, combining technical excellence with practical, hands-on delivery. We offer end-to-end capabilities – from concept and design through to manufacturing, construction and commissioning utilising a continually evolving in-house expertise. This means you’ll work on projects that are varied, challenging and genuinely impactful. Our multi-disciplinary teams bring together specialists in civil, mechanical, electrical, process, instrumentation, and control & automation engineering, alongside our in-house manufacturing of control panels, MCCs, PLCs and SCADA systems. With over 1,000 people and a strong, growing pipeline of work, it’s an exciting time to join Trant. We are committed to helping our people succeed through our Career Development Association, providing structured support, mentoring and clear pathways to help you reach your full potential. Whether you’re starting out or looking to take your next career step, Trant offers the chance to develop, progress and make a real difference. Our company benefits package includes. Competitive salary. Company car or car allowance (some levels.) Mentored support within our ‘Career Development Association’, to work towards chartership. 24 days holiday (increasing with service) + 8 bank holidays. Options to buy additional holiday via salary sacrifice. Company Pension Scheme. Flexible working based on a ‘core hours’ system. 1 x Professional Membership paid annually. Hybrid working. Employee assistance program. Free onsite parking. Bike to Work scheme. Discretionary annual bonus. Ready to take the next step in your career? Apply now and be part of something bigger

Building Services Manager Exeter Devon & Somerset portfolio An established public-sector organisation is looking to appoint a Building Services Manager to join its Estates team, based from Exeter. This is a varied estates environment covering approximately 100 operational sites across Devon and Somerset, including training facilities, offices, workshops and a stores facilities. Properties differ considerably in their age, use and operating requirements, with many locations occupied around different working patterns. As a result, the estate presents an interesting mix of planned maintenance, statutory compliance, reactive works and longer-term improvement projects. The Role As Building Services Manager, you will act as the Estates team's technical lead for Mechanical & Electrical building services, supporting the ongoing maintenance, improvement and renewal of the organisation's property portfolio. Working closely with the Senior Property Manager and wider Estates team, you will take ownership of building services compliance and help shape annual maintenance and improvement programmes. You will also oversee consultants and contractors delivering planned, reactive and project works across the estate. Key responsibilities will include: Acting as the technical lead for M&E and building services matters across the property portfolio. Managing statutory compliance alongside planned and reactive maintenance programmes. Undertaking property inspections and condition surveys, identifying required works and advising on priorities. Developing annual programmes of building services maintenance, servicing, replacement and improvement works. Managing M&E projects from initial scope through specification, procurement and delivery to completion. Preparing and reviewing technical specifications, drawings, cost estimates and work instructions. Managing external consultants, contractors and maintenance providers, including contract administration, certification and payment authorisation. Monitoring contractor performance, quality and Health & Safety standards. Maintaining accurate statutory maintenance and asset records and highlighting areas of risk or non-compliance. Providing technical input across power, lighting, heating, ventilation, fire detection and alarms, security, data installations and renewable technologies. Supporting wider property projects with specialist building services advice. Monitoring utilities and energy consumption across the estate and identifying opportunities to improve efficiency. Contributing to carbon reduction and environmental initiatives, including assessing new and emerging technologies. Ensuring works comply with relevant legislation, Building Regulations, Health & Safety requirements, CDM and internal procurement procedures. Managing works to agreed programmes and budgets while considering whole-life asset costs. About You The successful Building Services Manager will bring broad M&E/building services knowledge together with experience of managing maintenance contracts and projects across a multi-site estate. You will ideally be able to demonstrate: Experience managing statutory compliance, planned preventative maintenance and reactive maintenance. A strong background delivering both major and minor M&E projects, including contract administration and budgetary control. Experience managing building services consultants, contractors and suppliers. The ability to undertake building services condition and asset surveys and translate findings into practical programmes of work. Experience preparing specifications, tender documentation, drawings and cost estimates. Good knowledge of building services legislation, technical standards and statutory compliance requirements. Understanding of Health & Safety, Building Regulations, water regulations, asbestos requirements and CDM. Knowledge of standard forms of contract, ideally including JCT, NEC and relevant building services contracts. Good commercial awareness, including cost planning, budget management and procurement. An understanding of carbon reduction, energy management, renewable technologies and current building services trends. Strong communication and stakeholder-management skills, with the ability to explain technical matters clearly to different audiences. The ability to organise competing priorities and manage multiple projects and maintenance requirements simultaneously. Confidence working independently and across a geographically dispersed estate. Competence using Microsoft Office and relevant estates/project maintenance systems; CAD experience would be beneficial. You will hold a relevant Building Services, Mechanical or Electrical Engineering qualification, or be able to demonstrate equivalent industry knowledge and experience. Professional membership of a relevant body such as CIBSE, IET or IMechE would also be welcomed. What's in it for you? This is an opportunity to take a key technical role within a diverse and operationally important property portfolio. Rather than looking after a collection of similar commercial buildings, you'll work across an estate ranging from operational sites and training facilities through to offices, workshops and support buildings. As Building Services Manager, you'll have the scope to influence how building services are maintained and improved, shape future investment priorities and contribute to energy efficiency and carbon-reduction initiatives across the estate

Maintenance Technician (Mech or Elec) The Company: Are you an experienced Maintenance Engineer or Maintenance Technician with either Electrical or Mechanical or Multiskilled skill? In this 3 shift role (combining earlies, lates and nights) you will be responsible for the daily maintenance and repair (preventative and emergency) of a wide range of production and engineering machinery. You will work as part of a well established team of Maintenance Technicians and report into a Maintenance Manager. Job Responsibilities: Minimise production downtime by trouble shooting breakdowns and preventing reoccurrences. Work with electrical and mechanical drawings and documentation undertake fault finding and modification of plant and equipment. Use a Maintenance Management System carry out preventative/ planned maintenance work. Contribute to improvement initiatives aimed at enhancing equipment reliability and reducing recurring issues. Maintain a clean and safe working environment adhering to all EHS Company policies. Continuously enhance job knowledge through training and development opportunities. Perform electrical and mechanical work, including fabrication, welding and some minor electrical installation work as required.Requirements: Successful completion of a time-served apprenticeship with a minimum level 3 qualification, BTEC/City and Guilds or equivalent. Demonstrated multiskilled proficiency in industrial electrical AND/OR mechanical systems, including pneumatic/hydraulic systems, fabrication, and welding. Proven competency in reading and interpreting electrical and mechanical diagrams as well as troubleshooting control panels. Ability to pass medical which includes assessments for working at height and in confined spaces. Computer literacy and familiarity with office software applications. Resilient, resourceful approach, with sound judgment and decision-making skills. Proactive work ethic, strong initiative, and the ability to operate independently within a shift team environment.Pay and Hours: Working across a 3 shift pattern - 3 shifts (earlies, lates and nights), attracting a salary of £42000 (with paid overtime available at £26-27phr) Funded opportunities to study production and engineering qualifications 25 days annual holiday + bank holidays Contributory pension Health care cash back plan Life insurance Company bonus Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Agency for this vacancy

EES Contracts Ltd are an electrical contracting business working within the automation, power and lighting industries. We are looking fror a Site Manager to work on a long term project within the automation industry. As the Site Manager you will be responsible for delivering projects including plann

Electrical Contracts Manager Job Overview Overseeing a small team of Electrician's, both employed and subcontracted labour to deliver electrical refurbishment projects within a range of commercial sectors including leisure and hospitality Being the point of contact for clients from the initial conc

Keywords: Contracts Manager, Electrical Contracts Manager, EICR Manager, Electrical Testing Manager, Compliance Manager, Electrical Supervisor, 2391, 18th Edition, Electrical, Social Housing, Hertford, Hertfordshire, Enfield, Harlow, London, Essex \n This vacancy is being advertised by Future Engine

The role offers: Exposure to complex data centre and mission-critical projects Genuine ownership of technical decision-making Involvement from initial tender review through to final handover Direct access to senior leadership A mixture of design, coordination, commercial awareness and delivery The o

You will work as an M&E Manager, holding a qualification in electrical engineering and/or an electrical HND, whilst also having the appropriate skills and experience to fulfil the following duties. Wanted: Mechanical and Electrical Manager Salary: £45,348. A well-organised team player with sound te

The Role As Senior Electrical Construction Manager, you will take ownership of the electrical construction works from installation through commissioning and handover, ensuring delivery is safe, efficient and to the highest quality standards. Lead the De

Key responsibilities will include: Managing electrical works across domestic retrofit, electrical upgrade and renewable energy projectsOverseeing consumer unit replacements, rewires, EICR remedial works and electrical com

As Senior Electrical Project Manager, you will take full responsibility for the delivery of electrical packages on rail projects, ensuring works are completed safely, on programme, within budget, and to the highest quality standards. Senior Electrical Project Manager. We are working on behalf of one

Senior Electrical Project Manager - EV Charging Infrastructure. Role: Senior Electrical Project Manager. We're recruiting for a Senior Electrical Project Manager to join an established civils, fibre and telecoms business that is expanding into EV charging infrastructure.

You will manage the end-to-end electrical delivery of solar schemes ranging from. Electrical Engineering Integrity:. Oversee electrical installation works including containment, AC/DC cabling, string and central inverters, transformers, and grid connections.

Technical Manager – Electrical Building Services. The Technical Manager will take responsibility for the technical and electrical design management of projects from pre-construction through delivery, commissioning and handover. Lead electrical technical and design management across the full projec

We are seeking an experienced and dedicated Commissioning Manager and an Electrical Supervisor to join a prestigious £100m super prime residential refurbishment project located in Surrey. Commissioning Manager | Electrical Supervisor | Super Prime Residential |. Commissioning Manager + Electrical S

The Electrical Project Manager will be responsible for planning, coordinating, and delivering electrical installation projects safely, on time, and within budget. Aureos are seeking an Electrical Project Manager to join our growing team in Essex, Norfolk and Suffolk to support on a multitude of proj

Proven experience as an Electrical Contracts Manager or Senior Electrical Project Manager. An established engineering services-led Principal Contractor is looking to appoint an experienced Electrical Contracts Manager to oversee critical infrastructure projects across London and the surrounding regi

As part of their continued growth, they are looking to appoint an Electrical Technical Manager to lead the electrical design and engineering delivery across a portfolio of high value projects throughout London and the South East. This is a fantastic opportunity for an ambitious Electrical Technical

Electrical Engineering degree or strong electrical trade background. Lead all electrical scope delivery, managing engineering, construction and subcontractor teams.

Electrical Project Manager – Data Centre Projects (West London). The Electrical Project Manager will lead the delivery of. NVQ Level 3 or higher in Electrical Installation (or equivalent).

The manager will collaborate closely with design teams, contractors, and suppliers, monitor performance of mechanical and electrical systems, troubleshoot issues, and prepare progress and technical reports. The Mechanical and Electrical Manager is a full-time, on-site role based in the London Area,