Trabajos quality control engineer en Ellesmere PortCrear alertas

Morson is partnering with one of Europe’s leading aerospace manufacturers, who are seeking a Quality Engineer with design experience to join their team at the Chester site. \n Role Overview This role focuses on resolving quality issues and driving continuous improvement initiatives by establishing measurement standards and identifying enhancements to optimise process performance. The primary objective is to ensure product compliance with standards, process reliability, and repeatability from the initial design stage, prior to any process changes, and consistently throughout the product lifecycle. \n Key Responsibilities The Quality Engineering Wing team is responsible for implementing the Quality Strategy across Engineering Wing organisations. This is achieved through the delivery of Quality Improvement Projects and Plans, supporting the achievement of Engineering Wing quality objectives. The successful candidate will be responsible for Quality Performance activities, including: \n\n • Leading and delivering improvement projects to meet Engineering Wing quality targets (primary responsibility).\n, • Facilitating and supporting root cause analysis and practical problem-solving activities.\n, • Developing and implementing corrective and preventive action plans to enhance engineering quality performance and outcomes.\n, • Identifying risks or issues related to the quality of engineering deliverables and driving standardised mitigation plans to prevent or minimise risks associated with products and processes.\n, • Supporting the deployment and application of quality standards within the engineering organisation.\n, • Capturing and sharing lessons learned to improve organisational efficiency and product maturity.\n\n Essential Skills and Experience \n\n • Relevant experience in Quality and/or Engineering.\n, • Knowledge of Project Management principles.\n, • Understanding of Failure Modes and Effects Analysis (FMEA).\n, • Familiarity with root cause analysis techniques (e.g. 9S, 8D).\n, • Strong interpersonal skills and professional conduct when engaging with all levels of management.\n, • Ability to learn quickly with a positive and proactive approach to workload.\n, • Excellent verbal and written communication skills in English.\n, • Proficient IT skills relevant to the role, including Google Workspace and Microsoft Office.\n\n Desirable Skills and Experience \n\n • Knowledge of Product Lifecycle Management (PLM) and Product Data Management (PDM) systems.\n, • Understanding of engineering drawing and modification control.\n, • Experience within a design or manufacturing engineering environment is advantageous but not essential.\n, • Proficiency in German, both spoken and written, is highly desirable but not essential.\n, • Programming experience (e.g. JavaScript, Google Apps Script, Python) is highly beneficial but not essential.\n\n If you are interested in this opportunity, please apply with an up-to-date CV.

Metrology EngineerPermanent | Full Time \n A growing precision engineering and inspection business is looking to appoint an experienced Metrology Engineer to join their team in Deeside. This is a great opportunity for someone with a strong background in dimensional inspection, CMM programming and quality control to work on complex, high-spec components for aerospace, defence, automotive and advanced manufacturing customers. \n You'll play a key role in ensuring parts meet exacting standards, supporting both internal production and customer projects, and working closely with engineering, manufacturing and quality teams. \n What you'll be doing \n\n • Carrying out dimensional inspection of components and assemblies using CMMs, FARO Arms, laser scanning systems and conventional metrology equipment.\n, • Creating, editing and optimising CMM programs using software such as PC-DMIS, PolyWorks, MCOSMOS, Aberlink or similar.\n, • Reading and interpreting complex engineering drawings, CAD models and GD&T requirements.\n, • Producing accurate inspection reports, FAIRs and other quality documentation.\n, • Supporting root cause analysis and non-conformance investigations.\n, • Liaising with Quality, Manufacturing and Engineering teams to resolve dimensional and process issues.\n, • Completing first-off, in-process and final inspections.\n, • Supporting calibration and maintenance of metrology equipment.\n, • Contributing to continuous improvement across inspection and quality processes.\n\n What we're looking for \n\n • Previous experience as a Metrology Engineer, CMM Programmer or Senior Inspector.\n, • Strong understanding of GD&T.\n, • Experience using CMM equipment and portable metrology systems.\n, • Ability to read complex engineering drawings with confidence.\n, • Background in precision engineering, aerospace, automotive or defence manufacturing.\n, • Strong problem-solving skills and a high level of attention to detail.\n\n Desirable experience \n\n • 3D scanning or reverse engineering.\n, • Knowledge of AS9100 or ISO9001.\n, • CAD experience.\n, • Experience with PolyWorks or PC-DMIS.\n\n Qualifications \n\n • Engineering apprenticeship, NVQ Level 3, HNC/HND or equivalent in Mechanical Engineering, Manufacturing or a related discipline.\n, • Metrology or quality-related certifications would be an advantage.\n\n What's on offer \n\n • Competitive salary.\n, • Overtime opportunities.\n, • Pension scheme.\n, • Ongoing training and development.\n, • Modern inspection and manufacturing environment.\n, • Career progression within a growing business.\n, • 25 days holiday plus bank holidays.\n\n This would suit someone who enjoys working in a hands-on technical role where accuracy, quality and continuous improvement really matter. \n Please contact Coral at DCS to apply \n \n \n INDENG \n DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality

Nightshift Lineside EngineerLocation: Broughton - onsiteWorking Pattern: Night shift, Monday to Thursday, 8:45pm - 6:00amPay Rate: £30.00 per hour PAYE / £40.13 per hour UmbrellaShift Allowance: 30% on top of hourly rateSecurity Clearance: BPSS+ clearance requiredIR35: InsideMinimum Requirement: NVQ Level 4 or equivalentAbout the Role Guidant Global is recruiting for a Nightshift Lineside Engineer to support production activity at Airbus in Broughton. This is an excellent opportunity for a technically minded engineer who enjoys working directly with production teams, solving shopfloor challenges and helping to keep manufacturing operations moving efficiently.In this role, you will work closely with the production team and Autonomous Production Team, supporting the identification, analysis and resolution of technical issues that cannot be managed directly by operators or the First Line Manager. You will provide a valuable end-to-end perspective on the shopfloor, helping to unblock production issues, support continuous improvement and contribute to operational excellence.Key Responsibilities As a Lineside Engineer, you will: \n\n • Support the production team in identifying, analysing and resolving technical issues on the shopfloor.\n, • Assist with the identification, creation and follow-up of Non-Conformities and NC notifications.\n, • Provide technical input to help complete NC forms accurately, supporting containment and corrective actions.\n, • Prepare and enrich technical documentation relating to assembly anomalies, non-conformities, design queries, rework orders and outstanding work.\n, • Search for and provide relevant technical information, including drawings, references, parts, tooling and documentation.\n, • Support continuous improvement activity by identifying production issues, inefficiencies and opportunities to reduce waste.\n, • Escalate issues where appropriate to Work Prep, Line Balancing, Maintenance, MAP, OSW or other support functions.\n, • Contribute to Work Improvement Proposals, process validation activity and failure analysis.\n, • Support outstanding work management, including template completion, assessment with multifunctional teams and follow-up where required.\n, • Help flag blocked work orders for review at production control meetings.\n, • Support the prioritisation of serial and rework work orders linked to non-conformities, concessions or blocking points.\n, • Promote transparency and application of Environment, Health and Safety standards on the shopfloor.\n, • Support quality standards by helping ensure production processes and procedures are applied correctly.\n, • Assist logistics activity by supporting the prioritisation of materials linked to rework work orders.\n\n What We're Looking For We are looking for someone who can bring technical knowledge, problem-solving ability and a proactive approach to a fast-paced production environment. You will need: \n\n • A minimum NVQ Level 4 qualification, or equivalent.\n, • Experience working in a technical, manufacturing, production or engineering environment.\n, • The ability to analyse technical issues and support practical solutions.\n, • Strong communication skills, with the confidence to work with production teams and support functions.\n, • A structured and detail-focused approach to documentation, non-conformance activity and work order management.\n, • A continuous improvement mindset, with an interest in improving processes, reducing waste and supporting operational performance.\n, • A commitment to quality, safety and effective shopfloor support.\n\n Why Apply? This role offers the opportunity to work in a high-profile aerospace production environment, supporting frontline manufacturing activity and contributing directly to production performance. You will gain exposure to a wide range of technical, quality, logistics, process improvement and shopfloor support activities, making this a strong opportunity for someone looking to broaden their engineering experience within a complex manufacturing setting. The role also offers: \n\n • A 30% night shift allowance.\n, • A Monday to Thursday night shift pattern.\n, • The potential for contract extension.\n, • The opportunity to work with multidisciplinary teams across production, quality, logistics, maintenance and engineering support.\n\n Interview Process The interview process will consist of one stage.Equal Opportunities Guidant Global is committed to creating an inclusive recruitment experience. We welcome applications from people of all backgrounds and encourage candidates with the right skills, experience and potential to apply. \n Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Nightshift Lineside Engineer Location: Broughton - onsite Working Pattern: Night shift, Monday to Thursday, 8:45pm - 6:00am Pay Rate: £30.00 per hour PAYE / £40.13 per hour Umbrella Shift Allowance: 30% on top of hourly rate Security Clearance: BPSS+ clearance required IR35: Inside Minimum Requirement: NVQ Level 4 or equivalent About the Role Guidant Global is recruiting for a Nightshift Lineside Engineer to support production activity at Airbus in Broughton. This is an excellent opportunity for a technically minded engineer who enjoys working directly with production teams, solving shopfloor challenges and helping to keep manufacturing operations moving efficiently. In this role, you will work closely with the production team and Autonomous Production Team, supporting the identification, analysis and resolution of technical issues that cannot be managed directly by operators or the First Line Manager. You will provide a valuable end-to-end perspective on the shopfloor, helping to unblock production issues, support continuous improvement and contribute to operational excellence. Key Responsibilities As a Lineside Engineer, you will: • Support the production team in identifying, analysing and resolving technical issues on the shopfloor., • Assist with the identification, creation and follow-up of Non-Conformities and NC notifications., • Provide technical input to help complete NC forms accurately, supporting containment and corrective actions., • Prepare and enrich technical documentation relating to assembly anomalies, non-conformities, design queries, rework orders and outstanding work., • Search for and provide relevant technical information, including drawings, references, parts, tooling and documentation., • Support continuous improvement activity by identifying production issues, inefficiencies and opportunities to reduce waste., • Escalate issues where appropriate to Work Prep, Line Balancing, Maintenance, MAP, OSW or other support functions., • Contribute to Work Improvement Proposals, process validation activity and failure analysis., • Support outstanding work management, including template completion, assessment with multifunctional teams and follow-up where required., • Help flag blocked work orders for review at production control meetings., • Support the prioritisation of serial and rework work orders linked to non-conformities, concessions or blocking points., • Promote transparency and application of Environment, Health and Safety standards on the shopfloor., • Support quality standards by helping ensure production processes and procedures are applied correctly., • Assist logistics activity by supporting the prioritisation of materials linked to rework work orders. What We're Looking For We are looking for someone who can bring technical knowledge, problem-solving ability and a proactive approach to a fast-paced production environment. You will need: • A minimum NVQ Level 4 qualification, or equivalent., • Experience working in a technical, manufacturing, production or engineering environment., • The ability to analyse technical issues and support practical solutions., • Strong communication skills, with the confidence to work with production teams and support functions., • A structured and detail-focused approach to documentation, non-conformance activity and work order management., • A continuous improvement mindset, with an interest in improving processes, reducing waste and supporting operational performance., • A commitment to quality, safety and effective shopfloor support. Why Apply? This role offers the opportunity to work in a high-profile aerospace production environment, supporting frontline manufacturing activity and contributing directly to production performance. You will gain exposure to a wide range of technical, quality, logistics, process improvement and shopfloor support activities, making this a strong opportunity for someone looking to broaden their engineering experience within a complex manufacturing setting. The role also offers: • A 30% night shift allowance., • A Monday to Thursday night shift pattern., • The potential for contract extension., • The opportunity to work with multidisciplinary teams across production, quality, logistics, maintenance and engineering support. Interview Process The interview process will consist of one stage. Equal Opportunities Guidant Global is committed to creating an inclusive recruitment experience. We welcome applications from people of all backgrounds and encourage candidates with the right skills, experience and potential to apply. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy. JTRA1_UKTJ

Designing IIoT, automation and connected industrial solutions for real-world operational environments. DPS Group is growing its digitalisation capability, and we are looking for a Industrial Digital Solutions Architect who wants to play a key role in shaping what comes next. This is not a role for someone who wants to sit behind a desk designing systems in isolation. This is a hands-on, customer-facing opportunity for someone who enjoys solving real problems, challenging the norm and turning ideas into practical, deliverable solutions. You will work at the intersection of industrial automation, digital transformation, IIoT, edge technologies, cloud platforms, data, cybersecurity and connected operations. You will help our clients understand what is possible, define the right technical approach and support the delivery of solutions that create real operational value. At DPS, our purpose is simple: to positively shape the future of everyone we work with. This role is a chance to do exactly that. Why this role is exciting This is an opportunity to join a growing digitalisation team within an established solutions provider. You will have the pace, flexibility and influence of a start-up environment, but with the support, reputation and client base of a wider business behind you. You will be close to the decisions, close to the technology and close to the customers. You will not be limited to a narrow role description. You will be expected to bring ideas, challenge thinking, get involved, support others and help shape the way DPS delivers digitalisation solutions. For the right person, this is a role with real influence. What youll be doing As Industrial Digital Solutions Architect, you will work with clients, engineering teams, technology partners and internal stakeholders to design and support digitalisation solutions across industrial and process environments. You will help translate customer challenges into clear technical solutions. You will design architectures, support project delivery, contribute to commissioning and lifecycle support, and help ensure solutions are secure, scalable and practical. Your work may include: • Designing IIoT, edge, cloud, data and integration architectures., • Working directly with customers to understand requirements and shape solutions., • Supporting workshops, demonstrations and technical discussions., • Integrating technologies such as PLCs, gateways, industrial networks, cloud platforms, analytics tools and edge devices., • Ensuring solutions are aligned with cybersecurity principles and good architectural practice., • Supporting installation, commissioning, troubleshooting and continuous improvement., • Reviewing emerging technologies and identifying where they could add value., • Helping develop reusable standards, templates and approaches for future projects., • Working across teams to make sure solutions are not just technically strong, but deliverable and valuable. The type of person who will thrive here We are looking for someone with energy, commitment and ideas. You will be naturally curious and driven. You will enjoy solving complex problems, learning new technologies and finding better ways to do things. You will be confident enough to challenge the norm, but practical enough to turn ideas into action. You will set high standards for yourself and expect the same from those around you. You will be a leader by nature, whether that means guiding a technical discussion, supporting a colleague, influencing a customer or taking ownership when something needs to be done. This role will suit someone who understands what it means to work for a solutions provider. You will be comfortable balancing customer needs, technical ambition, delivery reality and commercial value. You will also need to be flexible. We are building a growing capability, so you will sometimes need to turn your hand to whatever is required. That might mean shaping strategy one day, supporting a client workshop the next, and helping resolve a delivery challenge after that. You may already be a Solutions Architect or ready to become one You may already be working in solutions architecture, or you may be in a role that naturally transitions into this space. What matters most is your ability to understand technical problems, engage confidently with customers, think across systems, connect ideas and help turn requirements into practical solutions. This role could suit someone from backgrounds such as automation, control systems, systems integration, digitalisation, IIoT, OT/IT integration, technical project engineering, commissioning, field engineering, application engineering, technical consultancy, pre-sales or solution engineering. You might be the person customers already turn to when they need something explained clearly. You might be the engineer who sees the bigger picture beyond your own discipline. You might be someone who enjoys bringing people, technology and ideas together to solve a problem. If you have the technical grounding, curiosity, customer confidence and drive to grow into a broader architecture role, we would be interested in speaking with you. Technical experience We are not expecting one person to be an expert in everything. We are interested in people who bring strong foundations, relevant experience and the appetite to keep learning. Experience in some of the following areas would be valuable: • Industrial digitalisation, IIoT or connected operations., • Automation, control systems, PLCs, HMIs or SCADA., • Edge computing and industrial networking., • Cloud platforms, particularly Azure IoT or similar., • Data integration, dashboards, analytics or reporting., • Industrial communication protocols such as OPC UA, MQTT, Modbus, PROFINET or Ethernet/IP., • Siemens technologies such as Industrial Edge, Insights Hub or TIA Portal., • Node-RED, Python, JavaScript, REST APIs, JSON, SQL or time-series databases., • Cybersecurity principles, ideally including IEC 62443., • OT/IT integration and multi-vendor industrial environments. Certifications such as Microsoft Azure, Siemens Industrial Edge or ISA/IEC 62443 would be beneficial, but they are not the only measure of success. We are equally interested in mindset, practical experience, leadership potential and the ability to deliver. Location and travel This role can be based anywhere in the UK. Travel will be part of the role. You will spend time with clients and will also be expected to attend DPS Group locations regularly, including our main DPS offices in Glenrothes and Monmouth. Building relationships across the business is important, and we want this person to be visible, connected and part of the wider team. Why join DPS? You will be joining a business that is serious about innovation, technology and long-term customer partnerships. You will have the opportunity to help shape a growing digitalisation capability, influence technical direction and work on solutions that make a real difference for customers. You will be trusted to bring ideas, challenge thinking and take ownership. You will work with people who care about quality, safety, delivery and doing the right thing for clients. This is a role for someone who wants to build, lead and make an impact. JBRP1_UKTJ

hackajob is partnering directly with Leonardo to hire for this role. Job Description: Salary Range: Senior Engineer £44,171 - £56,000 Principal Engineer £53,269 - £62,000 Where this vacancy is being recruited across more than one grade, the successful candidate will be appointed to a specific assessed grade, and the applicable salary range will be that associated with the grade of appointment. Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity. Your impact Leonardo is a global leader in defence electronics and delivers systems for situational awareness, electronic defence and surveillance across land, sea and air. The Radar and Advanced Targeting line of business is uniquely positioned as one of the world's top designers, developers and manufacturers of radars, lasers and infrared countermeasure systems. At Edinburgh, we have an opportunity for Senior and Principal Mechanical Engineers to join our team, where your role will be to design, develop and support our world leading radar products. You will be utilising state-of-the-art methods, technology and tools to explore all aspects of the development lifecycle, including stress and thermal analysis, requirements analysis, design, implementation, test, build and production support. You will interface with customers (internal and external) on many factors within the design and liaise closely with Engineers from other disciplines, particularly Systems and Electronics. You will have the opportunity to develop your skills and undertake training to enhance your capability within your role. What you'll bring • Design innovative, optimised engineering solutions taking into account all requirements such as product quality, safety, reliability and testability., • Perform detailed mechanical design and development using 3D CAD software., • Deliver design solutions against requirements, within budget and timescales., • Mentor, develop and coach engineers in terms of technical knowledge and soft skills., • Provide technical direction/support on critical business programmes to ensure delivery of mechanical engineering excellence., • Present or support robust engineering solutions at design and peer reviews to ensure technical accuracy of specifications, designs and reports., • Producing Manufacturing Data packs with appropriate use of GD&T., • Actively contribute to Work Package delivery elements to achieve desired Quality, Schedule and Cost., • Continue professional development throughout your career by formal training and keeping up to date with the latest developments, which may aid performance. Essential Skills, Qualifications and Experience for Senior Mechanical Engineer: • Hold a degree in Mechanical Engineering (or a related discipline), or possess equivalent relevant professional experience, where you have undertaken Mechanical design activity through the product lifecycle., • Hold Incorporated or Chartered Engineer status with the IMechE (or equivalent professional body), or be able to demonstrate the experience and UK-SPEC competencies required to achieve professional registration., • Experience in the design of systems for highly regulated industries and for harsh environments, including but not limited to shock, vibration and temperature., • Demonstrable proficiency in 3D CAD software (PTC Creo preferred), including modelling and drawing creation., • Experience using ERP and PDM systems for configuration management and revision control (Teamcenter Unified preferred)., • Have the ability to perform first pass analysis with FEA and interpret Structural and Thermal analysis data. Additional Essential Skills, Qualifications and Experience for Principal Mechanical Engineer: • Demonstrable experience leading and directing Mechanical design activity throughout the product lifecycle, including technical leadership of teams, projects and/or line management responsibilities. Experience in reviewing and approving the release of Mechanical designs and data packs in accordance with business and industry standards., • Experience working within multi-disciplinary teams to deliver solutions that meet customer requirements and programme objectives., • Experience managing engineering work packages and supporting product lifecycle activities, including planning, delivery and risk management., • Experience mentoring, coaching and developing engineers at different stages of their careers., • Strong communication and presentation skills, with experience of presenting at design reviews., • Be a Chartered Engineer with the IMechE or equivalent, or alternatively possess and be able to demonstrate that you have the required experience and UK-SPEC competencies necessary to obtain professional registration at Chartered level. Security Clearance This role is subject to pre-employment screening in line with the UK Government's Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC). For more information and guidance please visit: join us At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work-life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we're here to help you thrive. • Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year., • Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution., • Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity)., • Rewarding Performance: All employees at management level and below are eligible for our bonus scheme., • Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning., • Refer a friend: Receive a financial reward through our referral programme., • Tailored Perks: Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more., • Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. For a full list of our company benefits please visit our website. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team-they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. Be part of something bigger - apply now! Primary Location: GB - Edinburgh Contract Type: Permanent Hybrid Working: Hybrid JBRP1_UKTJ

Manufacturing Engineer – Electronics Manufacturing An exciting opportunity has arisen for a Manufacturing Engineer to join a leading UK technology and defence organisation, supporting the manufacture of advanced electronic products.This role is ideal for an engineer with electronics manufacturing experience who enjoys driving process improvements, supporting production, and solving complex manufacturing challenges within a highly regulated environment. Key Responsibilities • Support electronics manufacturing operations, NPI and Design for Manufacturability (DFM) activities., • Drive continuous improvement, root cause analysis and corrective actions to improve quality, efficiency and production performance., • Develop and maintain manufacturing processes including PFMEA, Control Plans and process documentation., • Provide technical support to production teams and collaborate with engineering and quality functions. Requirements • Proven experience within electronics manufacturing., • Knowledge of Lean Manufacturing, process improvement and manufacturing engineering principles., • Experience with PFMEA, process flow development and manufacturing risk mitigation., • Strong communication skills with the ability to work across multidisciplinary teams. What's on Offer • Competitive salary and comprehensive benefits package., • Excellent training, technical development and long-term career progression., • Opportunity to work on cutting-edge products within a growing, high-technology manufacturing environment. Please note: Due to the nature of the work, successful applicants must be eligible to undergo a basic security check. Applicants should have a minimum of 5 years' continuous UK residency and the right to work in the UK without sponsorship. JBRP1_UKTJ

Quality Engineer £38,000 - £42,000 Wrexham Days Only (Mon-Fri) gap technical are proud to be representing this global manufacturing business in their search for a Quality Engineer to work at their facility based near Wrexham Performance Objectives • Develop, implement, maintain, and continually improve the Quality Management System (QMS) in accordance with AS9100, customer requirements, and applicable regulatory standards., • Maintain and administer electronic Quality Management Systems (eQMS), Power BI reporting tools, and other quality-related applications., • Ensure quality records are accurately maintained and retained in accordance with company procedures and regulatory requirements., • Maintain control of inspection stamps, calibration status, and authorised inspection personnel., • Conduct internal process, product, and system audits, as well as coordinate and support external audits including customer, certification, and NADCAP special process audits., • Conduct supplier quality audits and supplier development activities., • Carry out process audits including Layered Process Audits (LPA), DOPS, Control Plan compliance, and production process verification., • Support customer visits, regulatory inspections, and certification audits, ensuring timely completion of audit findings and action plans., • Monitor, investigate, and resolve internal and external non-conformances, customer complaints, concessions, and returned products., • Maintain the internal Non-Conformance Report (NCR) database and ensure timely closure of corrective actions., • Support Advanced Product Quality Planning (APQP), including PPAP submissions for new product introduction (NPI), product modifications, and time-lapsed programmes., • Review contracts and new product introduction requirements to ensure quality requirements are identified and communicated., • Review and approve Engineering Change Notices (ECNs), Process Change Requests (PCRs), Control Plans, and FMEAs relevant to production., • Ensure production documentation and product release activities are completed in accordance with quality requirements., • Monitor supplier quality performance and support supplier development initiatives., • Conduct supplier audits and support supplier corrective action activities., • Liaise with customers, production, engineering, inspection, and supply chain teams to resolve quality-related issues., • Support customer visits, audits, and quality reviews while maintaining positive customer relationships. Person Specification • Degree in Engineering or a related technical field (or equivalent experience in quality engineering or management)., • Knowledge of aerospace quality standards and regulatory requirements., • Trained in quality tools and methodologies with certificate (e.g., SPC, PPAP, CAPA)., • Trained AS9100 Internal auditor with certificate (will consider automotive or with good demonstrable experience)., • Chartered Quality Engineer (CQE) by professional body., • Experience with aerospace OEMs and Tier 1 suppliers., • Familiarity with tools like Minitab, ERP, QMS systems. Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 04/09/2026 'By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy.' JBRP1_UKTJ

Shift Maintenance Engineer (Multi-Skilled) x 2 Salary - £48,672 Shift Pattern - 4 on / 4 off rotating shift pattern: • 2 days (7:00am 7:00pm), • 2 nights (7:00pm 7:00am), • 4 days offAbout the Role We are recruiting for a skilled Shift Maintenance Engineer to join a fast-paced food manufacturing operation. This Shift Maintenance Engineer position is a hands-on role responsible for providing both planned and reactive maintenance support across production facilities, ensuring equipment reliability, operational efficiency, and compliance with safety and quality standards. Working as part of a shift engineering team, the Shift Maintenance Engineer will play a key role in maintaining and improving site assets, supporting continuous improvement initiatives, and helping to deliver high levels of production performance. Key Responsibilities • Carry out planned and reactive maintenance on production equipment and site assets., • Diagnose and repair electrical and mechanical faults efficiently to minimise downtime., • Support production teams to ensure equipment is operating safely and effectively., • Utilise maintenance management systems to record work and manage asset care activities., • Assist with engineering improvement projects and equipment upgrades., • Participate in root cause analysis and problem-solving activities to prevent repeat failures., • Support continuous improvement and lean manufacturing initiatives., • Ensure compliance with health and safety, food safety, hygiene, environmental, and quality standards., • Work collaboratively with colleagues, contractors, and other departments to maintain operational performance., • Contribute to energy efficiency and environmental improvement initiatives.About You You will be a proactive and adaptable Shift Maintenance Engineer with strong fault-finding skills and experience working within a manufacturing environment. Essential Requirements • Recognised UK electrical or mechanical engineering qualification (NVQ Level 3 or equivalent)., • Multi-skilled engineering capability with experience in both electrical and mechanical maintenance., • Ability to interpret electrical and mechanical engineering drawings., • Basic PLC input/output fault-finding knowledge., • Good understanding of motors, drives, transmissions, brakes, feedback systems, and associated controls., • Strong communication skills and the ability to work effectively within a team., • Organised, self-motivated, and capable of performing under pressure.Desirable Skills & Experience, • Experience within food manufacturing or other highly regulated production environments., • Electrical regulations qualification (BS7671 or equivalent)., • Knowledge of SCADA and machine control systems., • Experience programming variable speed drives (VSDs)., • Fabrication and welding skills., • MEWP licence., • Health and Safety qualifications or certifications.What You'll Bring, • A strong commitment to safety, quality, and continuous improvement., • Excellent troubleshooting and problem-solving abilities., • A positive team-focused attitude., • The ability to identify opportunities to improve equipment performance and reliability., • A desire to develop your skills and contribute to a high-performing engineering team.Apply If you are a motivated Shift Maintenance Engineer looking for a challenging role within a modern manufacturing environment, we'd love to hear from you. Contact01952 525252 and ask for Jack, or email jack.enefer(at)proactivepersonnel.net. JBRP1_UKTJ

Are you an experienced Machine Build Engineer, Automation Engineer, Mechanical Fitter or Electro-Mechanical Engineer looking for your next challenge? Do you enjoy building bespoke automation equipment from the ground up, working closely with design engineers and seeing your work progress from concept through to commissioning? We're supporting a leading precision engineering manufacturer in Portsmouth who are looking to recruit a Senior Machine Build Engineer to join their Automation team. This is an exciting opportunity to work on the design, build and commissioning of bespoke automated manufacturing equipment that supports cutting-edge production technology. What's the role all about? As a Senior Machine Build Engineer, you'll take a leading role in building and commissioning special purpose automation machinery used within a high-tech manufacturing environment. Working alongside Mechanical, Electrical, Controls and Software Engineers, you'll build complex automated systems from engineering drawings, assist with machine development and play a key role in machine proving and commissioning before release into production. This is a varied, hands-on engineering role where no two projects are the same. Key responsibilities • Build bespoke automation and special purpose machinery from engineering drawings, • Assemble complex mechanical sub-assemblies to high precision standards, • Carry out electrical cabinet wiring, machine hard wiring and electrical testing, • Install and configure pneumatic systems and associated control equipment, • Work closely with Design Engineers on new automation and R&D projects, • Assist with machine proving, testing and commissioning activities, • Support Software Engineers during machine sequencing and commissioning, • Diagnose and resolve mechanical, electrical and pneumatic faults, • Lead specific machine build projects from assembly through to final handover, • Work to project deadlines while maintaining exceptional quality standards, • Maintain accurate build documentation and support ERP processes, • Promote safe working practices and maintain high housekeeping standards What you'll need To succeed in this role, you'll bring: • Proven experience building special purpose machinery or factory automation equipment, • Strong mechanical assembly and machine fitting experience, • Ability to read and interpret engineering drawings, assembly drawings and GD&T, • Experience with electro-mechanical assembly, • Electrical wiring, terminating and fault-finding experience, • Good understanding of pneumatic systems, • Experience with manual workshop machinery including mills, lathes and grinders, • Strong problem-solving skills and attention to detail, • Ability to work independently and as part of a multidisciplinary engineering team Desirable • Experience working with PLC-controlled machinery, • Knowledge of motion control systems, sensors and vision systems, • Machine commissioning and validation experience, • Design for Manufacture (DFM) and Design for Assembly (DFA) knowledge, • Root Cause Analysis experience, • Experience using ERP systems such as IFS, • HNC/HND or Apprenticeship in Mechanical or Electrical Engineering About you You're an experienced engineer who enjoys taking ownership of complex machine builds and solving technical challenges. You'll be: • Hands-on and technically capable, • Detail-focused with high-quality workmanship, • A proactive problem solver, • Comfortable working to project deadlines, • A collaborative team player, • Passionate about automation and engineering innovation Why join? This is a fantastic opportunity to join a growing engineering business investing heavily in automation, technology and advanced manufacturing. You'll work on bespoke machinery, collaborate with experienced design and software engineers, and play a key role in delivering innovative automation solutions that support world-class manufacturing. Benefits • Competitive salary, • 25 days holiday plus bank holidays, • Additional 3 days off over the festive period, • Company bonus scheme, • Company pension, • Life Assurance (3x salary), • Employee Assistance Programme, • Cycle to Work Scheme, • Ongoing training and career development Interested? If you're an experienced Machine Build Engineer, Automation Engineer, Mechanical Fitter, Electro-Mechanical Engineer or Commissioning Engineer looking for your next opportunity, we'd love to hear from you. Apply today or contact us for a confidential discussion. Kingdom People are acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ

NES Fircroft are partnering with our major Engineering & Services client to provide a Senior Control Systems Design Engineer for a major Nuclear project. Long-term project with potential for 3+ years work. Mon-Fri minimum 37hrs per week. Hybrid working available 3 days in Warrington office per week, with occasional visits to site in Cumbria if necessary. Overview of the Senior Control Systems Design Engineer: To work within the end client's design team, leading a team of Programmable Electronic System (PES) based Control System Design Engineers delivering, supporting others delivering and checking designs/updates to meet functional and business needs. The procurement, integration, installation and commissioning of the designs/updates is undertaken by others, hence is outside the scope of this particular role. Essential: • Academic Qualification: Minimum - HNC, • Professional Qualification: Minimum - Incorporated Engineer, • Experience of SCADA/PLC control systems and network architectures, • Proven experience successfully delivering a PES based Control System Lead Design Engineer role on external multidiscipline projects, from concept design through to handover, with a working knowledge of the appropriate Engineering Standards, • Effective verbal and written communication skills with the ability to convey information to other team members/disciplines, • Providing support to Commissioning, • Willingness to support early career Engineers Desirable: • BEng and Chartered Engineer, • Minimum 5 years successfully delivering as a PES based Control System Design Engineer on external and/or SL multidiscipline projects, from concept design through to handover, with a working understanding of the appropriate Engineering Standards, • Experience in the production of detailed design packages; Drawings, Specifications (CONCISE), Outline Installation Method Statements, CDM design risk assessments, Residual Risk Assessments, in addition to the supporting Quality, Operations and Maintenance documentations, • Experience in working with PES based Control System/servo drive interfaces, • Valid SC clearance would be beneficial, however, potential for this to be obtained upon offer of contract. JBRP1_UKTJ

Metrology Engineer Permanent | Full Time A growing precision engineering and inspection business is looking to appoint an experienced Metrology Engineer to join their team in Deeside. This is a great opportunity for someone with a strong background in dimensional inspection, CMM programming and quality control to work on complex, high-spec components for aerospace, defence, automotive and advanced manufacturing customers. You'll play a key role in ensuring parts meet exacting standards, supporting both internal production and customer projects, and working closely with engineering, manufacturing and quality teams. What you'll be doing Carrying out dimensional inspection of components and assemblies using CMMs, FARO Arms, laser scanning systems and conventional metrology equipment. Creating, editing and optimising CMM programs using software such as PC-DMIS, PolyWorks, MCOSMOS, Aberlink or similar. Reading and interpreting complex engineering drawings, CAD models and GD&T requirements. Producing accurate inspection reports, FAIRs and other quality documentation. Supporting root cause analysis and non-conformance investigations. Liaising with Quality, Manufacturing and Engineering teams to resolve dimensional and process issues. Completing first-off, in-process and final inspections. Supporting calibration and maintenance of metrology equipment. Contributing to continuous improvement across inspection and quality processes.What we're looking for Previous experience as a Metrology Engineer, CMM Programmer or Senior Inspector. Strong understanding of GD&T. Experience using CMM equipment and portable metrology systems. Ability to read complex engineering drawings with confidence. Background in precision engineering, aerospace, automotive or defence manufacturing. Strong problem-solving skills and a high level of attention to detail.Desirable experience 3D scanning or reverse engineering. Knowledge of AS9100 or ISO9001. CAD experience. Experience with PolyWorks or PC-DMIS.Qualifications Engineering apprenticeship, NVQ Level 3, HNC/HND or equivalent in Mechanical Engineering, Manufacturing or a related discipline. Metrology or quality-related certifications would be an advantage.What's on offer Competitive salary. Overtime opportunities. Pension scheme. Ongoing training and development. Modern inspection and manufacturing environment. Career progression within a growing business. 25 days holiday plus bank holidays.This would suit someone who enjoys working in a hands-on technical role where accuracy, quality and continuous improvement really matter. Please contact Coral at DCS to apply INDENG DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality

Company description CSL Seqirus is part of CSL. As one of the largest influenza vaccine providers in the world, CSL Seqirus is a major contributor to the prevention of influenza globally and a transcontinental partner in pandemic preparedness. With state-of-the-art production facilities in the U.S., the U.K. and Australia, CSL Seqirus utilizes egg, cell and adjuvant technologies to offer a broad portfolio of differentiated influenza vaccines in more than 20 countries around the world. To learn more about CSL, CSL Behring, CSL Seqirus and CSL Vifor visit https://www.csl.com/ and CSL Plasma at https://www.cslplasma.com/ . Job description For our Project Engineering department, we are looking for a Senior Project Engineer Reporting to the Senior Manager, Project Engineering, this is a senior technical role focussed on scoping, delivery and cost control of capital projects to meet the needs of the LVP site, including cGMP, EHS, business continuity, cost reduction and sustainability. The role holder is expected to lead engineering projects involving cross functional teams and multiple GMP disciplines and uphold the prevailing site and CSL standards for cGMP, EHS, PMO and Engineering The Opportunity: Responsible for creating accurate and timely proposals for investment projects in accordance with departmental & CSL procedures, to ensure that projects can be submitted for approval in line with the capital expenditure plan Budget and schedule responsibility for approved multi-disciplinary GMP projects, including monitoring and reporting on the status of projects and cashflow forecasting in multiple formats. Accountable for meeting cashflow forecast as directed to support site expenditure targets, and for timely capitalisation of new fixed assets. Manages and participates in the commissioning, qualification and handover processes for capital projects in liaison with quality assurance, production management and maintenance functions, and ensures that all necessary training, drawings and documentation are provided for validation, operation and maintenance purposes. Ensures that appropriate standards of GMP, housekeeping, safety and discipline are maintained at all times both within the department and operational/construction areas Required profile MSc/BSc/BA in Engineering preferred or local equivalent 5+ years practical and leadership experience in pharmaceutical industry Functional knowledge of cGMPs and manufacturing operations in FDA regulated facility Pharmaceutical/biotech industry experience preferred Understanding of project management principles and project lifecycle phases Knowledge of Validation, and facility regulatory submission requirements What we offer Pension Private dental/ medical cover Life assurance Income protection Critical Illness Insurance Personal accident insurance Personal travel insurance Employee share plan TPBN1_UKTJ

Principal Control & Instrumentation Engineer Nuclear Sector | FEED Project | Leading Engineering Consultancy | Hybrid | Long-term Contract | Outside IR35 | Competitive Rate The Opportunity We're recruiting a Principal Control & Instrumentation Engineer to deliver key design elements on an exciting Front End Engineering Design (FEED) project in the nuclear sector. You'll combine technical leadership with hands-on design production, managing technical resources, driving project delivery, ensuring compliance and quality, and acting as the contact for the C&I discipline team and end client. Contract Details: Outside IR35 | Competitive rate | Hybrid working | Long-term contract | Nuclear FEED project This is a senior technical role. You'll execute hands-on design work, and interface with delivery teams, clients and stakeholders. You'll drive progress on complex technical challenges, maintain quality standards, and ensure projects deliver on company and client promises. You're equally comfortable designing safety systems and mentoring engineers as you are managing project budgets and risk. What You'll Be Doing Technical Design Delivery Lead and execute key elements of C&I design across the full engineering lifecycle (tendering through close-out) Specify and design Safety Instrumented Systems (SIS) in line with IEC 61511 and IEC 61508 Conduct Safety Integrity Level (SIL) assessments and functional safety case development Produce control system designs, instrumentation specifications, P&IDs and technical documentation Check, approve and ensure quality of all C&I design deliverables Ensure all designs meet regulatory requirements, standards and client specifications Support technical problem-solving and resolution on complex challenges Project & Team Leadership Act as single point of contact for C&I discipline team on projects Hold budget and resource responsibility for allocated scope Line manage team members and drive career development Provide technical mentoring and support to junior engineers Manage discipline workload, schedules and delivery Interface with project management, delivery teams and clients Project Management & Governance Manage project reporting (KPIs, progress, change management) Track and report on risk/opportunity registers Support carbon tracking and sustainability reporting Participate in change control processes Maintain project compliance and quality standards Ensure regulatory and standards compliance Technical Compliance & Regulatory Ensure competence in ATEX requirements and potentially explosive area installation Manage CE marking compliance (ATEX, PED, Low Voltage Directive, Machinery Directive, EMC) Support CDM regulations and design responsibility requirements Contribute to risk identification, quantification and management Maintain HSE awareness and safety compliance across work Stakeholder & Client Management Manage technical interfaces between delivery teams Engage with clients on technical and project matters Communicate progress, risks and issues to project leadership Collaborate across disciplines to drive integrated delivery Build and maintain strong client relationships About You Essential Qualifications & Experience Degree in relevant engineering discipline (ideally 2:1 or better) or equivalent professional experience Chartered Engineer (CEng) or Incorporated Engineer (IEng) status with a relevant professional body Valid safety passport or equivalent industry qualification Minimum 12+ years' C&I engineering experience across full project lifecycle Extensive engineering design experience from tendering through to close-out and handover Competence in Safety Instrumented Systems (SIS) design to IEC 61511 and IEC 61508 Proven line management and mentoring experience with demonstrated ability to drive career development Expert-level knowledge of: Control system design and specifications Safety Instrumented Systems and functional safety ATEX and potentially explosive area requirements CE marking compliance and regulatory requirements UK regulatory framework and CDM regulations Industry standards and best practice Proven ability to: Deliver high-quality technical design work Lead and manage engineering teams Manage budgets and resources effectively Drive projects and resolve complex technical challenges Balance hands-on delivery with management responsibilities Produce and interpret project KPIs and reporting data Strong organisation and time-management skills Excellent communication skills - confident engaging with teams, clients and stakeholders Collaborative approach - comfortable working across disciplines and functions Highly motivated - takes ownership of delivery, quality and team development Desirable Track record on nuclear sector projects Experience on FEED (Front End Engineering Design) projects Experience on major infrastructure or process plant projects Experience in oil & gas, chemicals, water or similar sectors Knowledge of safety-critical system design and assurance Experience with risk and opportunity management Familiarity with BIM and integrated project delivery Understanding of carbon tracking and sustainability in design Commercial awareness and project margin management The Role in Practice You'll take technical and management responsibility for C&I scope on assigned projects. Day-to-day activities combine design production (specifications, calculations, drawings, compliance assessments), team management (mentoring, work allocation, performance), and project management (reporting, budgets, risk management, client engagement). You'll report to senior project leadership and work collaboratively across engineering disciplines, construction teams, and client organisations. You'll be the technical authority on C&I matters whilst also responsible for team capability, project performance and commercial delivery. This is a demanding role that requires equal competence in technical delivery and people/project management. The right person thrives on both the technical challenge and the responsibility of leading delivery and developing talent. Why This Role You'll be working on an exciting FEED project in the nuclear sector - strategically important work at a critical stage of major infrastructure development. This is senior C&I engineering where your technical expertise, project management capability and leadership skills are genuinely valued. You'll have scope for progression, responsibility for significant scope and budgets, and the opportunity to support the next generation of C&I engineers on a major national infrastructure programme. The role offers competitive rates for principal engineers with proven project delivery track record, long-term engagement on a major nuclear FEED project, hybrid working flexibility, genuine technical authority and management responsibility, and career development opportunities on critical infrastructure

Electrical Maintenance Engineer (Energy-from-Waste) Days based shift (Monday-Friday) - You can be based in or around the following areas: Ellesmere Port, Chester, Birkenhead, Liverpool, Manchester, Wrexham, Crewe, Northwich, Warrington £45,000 - £50,000 + Overtime (1.5x hourly rate weekdays, 2x hourly rate weekends) + 33 days Holiday (inclusive of Bank Holidays) + Life Assurance + Enhanced Pension Scheme + Medicash + Onsite Parking Are you an Electrical Maintenance Engineer looking to work within a high-tech process plant within the growing renewable energy sector offering a days-based role? Do you want to join a multinational industry leading organisation working on technically interesting electrical systems such as DCS, PLCs, SCADA and HMIs? This is a specialist organisation dedicated to shaping the future through the green energy transition. With a new state-of-the-art facility growing their already extensive UK presence, this company provides a high-quality product through investing in world class facilities. The ideal candidate has experience servicing and maintaining electrical instrumentation systems and is now seeking a role working on high-quality framework within an organisation devoted to green energy production. This is the perfect opportunity for an experienced engineer to join a close-knit yet well established team as they look to add to their growing in-house unit. The Role: Undertake planned and reactive maintenance on Electrical and Instrumentation equipment across the facility Ensuring the safe running of critical systems through your knowledge of process control instrumentation and plant control systems Site-based working at the new cutting-edge production centre Opportunity to boost your earnings through overtime and a call-out rota The Person: Experience performing servicing and maintenance of Electrical / Instrumentation systems Knowledge of plant control instrumentation and control systems including PLC's, SCADA, HMI's Experience working with LV equipment Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Alfie Derrick at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Senior Electrical Maintenance Engineer (Energy-from Waste) Days based shift (Monday-Friday) - You can be based in or around the following areas: Ellesmere Port, Chester, Birkenhead, Liverpool, Manchester, Wrexham, Crewe, Northwich, Warrington £50,000 - £55,000 + Overtime (1.5x hourly rate weekdays, 2x hourly rate weekends) + 33 days Holiday (inclusive of Bank Holidays) + Life Assurance + Enhanced Pension Scheme + Medicash + Onsite Parking Are you an experienced / Senior Electrical & Instrumentation Engineer looking for a days-based, Monday-Friday role within a state-of-the-art facility where you will work on cutting-edge systems? Do you want to join a global leader operating one of the UK's most advanced process plants, maintaining and fault finding on technically challenging equipment including DCS, PLCs, SCADA, HMIs and complex process instrumentation? This is a specialist organisation dedicated to shaping the future through the green energy transition. With a new state-of-the-art facility growing their already extensive UK presence, this company provides a high-quality product through investing in world-class facilities. The ideal candidate has extensive experience maintaining electrical and instrumentation systems and is looking to take the next step into a senior position, acting as a task expert supporting maintenance activities and providing technical guidance across the site. This is the perfect opportunity for an experienced engineer to join a close-knit yet well-established team as they continue expanding their in-house maintenance function. The Role: Undertake planned and reactive maintenance on Electrical and Instrumentation equipment across the facility Provide technical leadership and support to the maintenance team, ensuring the safe and efficient running of critical systems Fault find and maintain plant control instrumentation and control systems including DCS, PLCs, SCADA and HMIs Site-based working at the new cutting-edge production centre Opportunity to boost your earnings through overtime and a call-out rota The Person: Extensive experience servicing and maintaining Electrical / Instrumentation systems within a process plant Strong knowledge of plant control instrumentation and control systems including PLCs, SCADA, HMIs and DCS Experience working with LV equipment Previous experience in a senior or lead maintenance role, or motivated to step into one Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Alfie Derrick at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Engineering Management role based in Cheshire. Working for a growing manufacturing company Client Details Our client is a growing and well established manufacturing and engineering company based in Cheshire Description 1. Lead the delivery of the Design project portfolio, ensuring new products progress through the company's New Product Introduction (NPI) / process on time, to cost and to specification., 2. Own the day-to-day operation of the NPI process within the Design Office - planning, resourcing and sequencing design work across concurrent projects and phases., 3. Drive New Product Delivery from design brief through concept, detailed design, prototype support, design verification and validation, to production release and post-launch review., 4. Plan and manage design engineering resource and capacity., 5. Chair and record design reviews, ensuring design outputs meet the brief, regulatory requirements and manufacturability standards before progression., 6. Own engineering data governance within the Design Office - CAD, drawing and Bill of Materials (BOM) standards, revision control and the PDM/PLM data structure., 7. Manage the engineering change process (ECR/ECN), ensuring changes are impact-assessed, approved, documented and communicated in a controlled manner., 8. Support the Purchasing Team with the technical specification of products and materials, and with the design assessment of newly sourced and alternative components., 9. Manage the design-to-production handover, applying Design for Manufacture and Assembly (DFMA) principles and ensuring Manufacturing and Quality receive complete, correct and timely information., 10. Ensure the Design Office is maintained in a manner that ensures the company's H&S standards are met at all times., 11. Continued development of the Design Team's capabilities, tools and systems to ensure they can respond to the demands of the business., 12. Provide an environment to allow Team Members and yourself to grow and develop., 13. Assist all departments with rapid and accurate Technical Advice and information., 14. Have a "can do" attitude, challenge the "Status Quo"., 15. Develop and maintain departmental process documentation and systems. Profile Proven track record in industrial manufacturing A strong engineering design background Excellent leadership skills A qualified mechanical engineer You will have recent exposure leading a NPI design engineering team in a hands on management roleJob Offer £65,000 to £75,000 plus benefits

Morson Human Resources Limited is looking for a Project Quality Control Engineer in the UK. The role involves undertaking inspection activities, reviewing quality plans, and ensuring compliance with project standards. You will drive quality assurance through inspections and maintain documentation th

Seeking a QC Engineer for a fabrication business in the Nuclear industry. Responsibilities include implementing quality plans, reviewing documentation, conducting audits, and ensuring compliance.

Join us as an Quality Control Engineer for Floplast in Sittingbourne.

An opportunity has arisen within the Transmissions & Mechanical Parts Centre of Excellence for a Quality Control Engineer to support Production in meeting the Quality Control, Quality System & Regulatory requirements. Morson Edge are currently seeking a Quality Control Engineer to work on the behalf

Overseeing quality control, improving processes, and ensuring compliance with industry standards within the steel business unit.

Monitoring production lines and reporting any quality issues.

Location: Deeside Industrial Estate Key responsibilities: - Operate, monitor and adjust production machinery to meet output and quality targets - Set up machines and perform routine checks, cleaning and basic maintenance as required - Follow production schedules and accurately complete production a

This is an exciting opportunity for someone who is passionate about quality, coaching and continuous improvement.

To own quality and compliance across the business — ensuring products are checked, tested and released to the required standard, the quality management system is maintained and audit-ready at all times, and customer concerns are investigated and resolved professionally. The role is the site's go-t

The business is a well-established company and are looking to expand their talented quality team by recruiting a full time and permanent QA Technologist.

What you’ll be doing as Quality & Environmental Assurance Manager: Standalone role at the outset — own the full quality management system, food-contact compliance, laboratory, process control, audit readiness and data-driven performance framework. Real regulatory and commercial stakes:

You'll work closely with engineering, production, suppliers and senior leadership, with the authority to shape and improve quality processes as the business continues to grow. Maintain quality documentation, traceability and process controls. Quality management experience within engineering or manuf

As Quality Engineer, you will support Press, Body, Paint and General Assembly areas, working closely with internal teams, suppliers, customers and service providers to maintain product quality and continuity of production. We are recruiting for a Quality Engineer to join the Quality Assurance team a

Many Quality Engineers inherit established systems, fixed processes and limited scope to change them. Work with Engineering and Manufacturing to improve product and process quality. Support New Product Introduction from a quality perspective.

Drive product quality across CNC machining, welding, electropolishing, finishing and inspection. CNC machining, welding, electropolishing, inspection, engineering and production.

Design Quality Engineer This position will be based full time in Pitstone, Hertfordshire Inside IR35 basis 12 months The Design Quality Assurance Engineer ensures engineering designs meet safety, regulatory (EASA, CAA) and customer requirements before production commences, focusing on risk mitig

Drive product quality across CNC machining, welding, electropolishing, finishing and inspection. CNC machining, welding, electropolishing, inspection, engineering and production.

Customer Quality Assurance Engineer 12 months Pitstone, Hertfordshire Rate: £40-45 per hour inside IR35 The Customer Quality Assurance Engineer is a specialised role created to function as a link between the businesses program and manufacturing functions and the customer, making sure enginee

Description As the Quality Engineer you will be responsible - · Support and maintain the company's Quality Management System (QMS) in accordance with ISO 9001, customer requirements, approved procedures, specifications, drawings, and relevant standards. Established in 1964, the company

You will be given the opportunity to influence how quality is managed across the organisation, rather than focusing solely on procedural compliance. Design, implement and maintain the quality management system. Lead document control and management system change activities.

Quality Lineside Engineer - Nightshift. Do you have experience as a Quality Lineside Engineer?. As the Quality Lineside Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing.

Morson is collaborating with one of Europe's foremost aerospace manufacturers to recruit a Quality Lineside Engineer to join their team at the Chester site.

Double Day Lineside Engineer Location: Broughton (Onsite) Contract: 9 months, strong likelihood of extension Rate: £40. Inside IR35 Umbrella The Opportunity An experienced and proactive Lineside Engineer is required to support manufacturing operations within a fast-paced production environm

NDT Quality Control Welding Inspectors. The successful applicant(s) will join an experienced team of quality engineers and QC inspectors, working closely with technical and production departments in the manufacture of nuclear fabrications. Boccard is driving growth in the new era of nuclear energy a

The Lead Customer Quality Assurance Engineer is a specialised role created to function as a link between the customers, to ensure engineering design and production standards meet customer, safety, and regulatory (EASA, CAA) standards focusing on risk mitigation and process compliance. Lead Customer

Lead Design Quality Engineer Pitstone, Hertfordshire Inside IR35 12 months You will ensure that engineering designs meet safety, regulatory (EASA, CAA) and customer requirements before production commences focusing on risk mitigation and process compliance and engages effectively with all involved

You will ensure that engineering designs meet safety, regulatory (EASA, CAA) and customer requirements before production commences focusing on risk mitigation and process compliance and engages effectively with all involved regulatory bodies. Lead engineer is a senior role responsible for planning a

IR35 The Lead Customer Quality Assurance Engineer is a specialised role created to function as a link between the customers, to ensure engineering design and production standards meet customer, safety, and regulatory (EASA, CAA) standards focusing on risk mitigation and process compliance. Lead Cus

The Customer Quality Assurance Engineer is a specialised role created to function as a link between the businesses program and manufacturing functions and the customer, making sure engineering design and production standards meet safety, regulatory (EASA, CAA) and customer requirements focusing on r

Are you hardworking, reliable, and ready to be part of a dynamic team? We're looking for motivated individuals to join our team and help us deliver high-quality products to our customers every day.