Trabajos welder en Abilene, TexasCrear alertas

Job DescriptionDescription: $500 Sign-On Bonus Weekend Shift: Thursday- Sunday ($5 shift Diff). Job description Petrosmith a leading provider of production equipment for the oil and gas industry is currently looking for experienced Vessel and Piping Welders to join our team. Our Fabrication Shop specializes in Vessels used in the Oilfield Industry. Welders will be responsible for welding pressure vessels experience is required must be able to pass a 6G or 3G weld test. Responsibilities: • Interprets drawings and specifications, • Welds carbon steel and components using weld procedures, • Fit-up ANSI flanges to pipe, forged flanges to shells and profile nozzles to match required shell., • Lay-out nozzles and other sub assembly location in shell components, • Burns and grinds nozzle cutouts in shell to meet engineering tolerances, • Uses flame cutting torch, carbon arc gouging, plasma arc, portable grinders and other tools., • Uses overhead cranes, jib cranes and other lifting/ rigging devices to move components in a safe manner., • Completing jobs based on standard shop procedures, • Conforms to shop quality practices and procedures, • Conforms to safety requirements of the shop, • Works productively with others to help determine best solutions, • Other duties as assigned Qualifications: • Proficient in basic math including addition/ subtraction of whole numbers, fractions and decimals, • Proficient in reading a tape measure/ rulers in increments of 1/16”, • Ability to read blueprints, • Ability to understand manufacturing sequence in a vessel fabrication shop, • Ability to use various welding, grinding and fitting tools, • Ability to follow shop procedures, quality procedures and safety practices., • Ability to pass 6G or 3G welding test, • Requires pressure vessel shop fabrication experience, • Ability to lift materials job components up to 50 pounds, • Ability to arrive to work on time Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Referral programRequirements:

Job DescriptionBenefits and retirementPurpose: Secure components together using electric welding. Create accurate welds that do not changethe measurements of the component and will be able to with stand various types of steam, hot water,gases, lubrications, sprinkling, and industrial processing systems.Work Schedule: Varies by location. Must have open availability any time any day of the week. Length ofemployment is limited to job assignment and/or project duration.Essential Skills (may include but are not limited to the ability to:) Secure components together applying knowledge of geometry, physical properties of metal machiningweld shrinkage, and welding techniques. Select appropriate equipment and plan the layout and assembly of a welding process. Apply knowledge of geometry, physical properties of metal machining weld shrinkage and weldingtechniques. Bolt, clamp and tack−weld parts to secure in position for welding. Prepare material for welding by cutting or grinding using pipe cutters, hammer and chisel, cutting torch,and/or grinder. Set material in stands, racks, hoists, etc. for welding. Set up equipment and weld parts using arc, gas−shielded arc, submerged arc or gas welding equipment. Repair products by dismantling, straightening and reshaping. Reassemble parts using cutting torch, straightening press and hand tools. Read and understand plans, isometrics, arrangement drawings, details, specifications, erectionmanuals, and/or blueprints and make decisions based on measurable criteria. Visualizes objects in three−dimensions from plans and drawings. Measure, cut, bevel, grind, and fit pipe to specifications and blueprints. Pass Samuel EPC approved testing procedures for both structural and pipe welding. Fabricate for socket weld pipe from isometrics Identify pipe by size, type, and wall thickness Perform simple rigging operations Install pipe hangers, supports, anchors, and guides Work within precise limits and standards of accuracy. Follow oral and written directions Work within company policy as outlined in the Samuel EPC Craft Handbook and maintain compliance with both the Samuel EPCHuman Resources Policy Manual and the Samuel EPC Safety Manual. Perform other duties as assigned by the foreman/supervisor as needed.Essential Qualifications Five (5) years minimum Field experience in trade Ability to identify all techniques of welding (TIG, MIG, arc, etc.), and know all properties of varioustypes of metal and how heat affects them. Ability to identify the requirements for various welding tests (6g, X−ray, etc.) and to producewelds that meet each requirement. Completion of certification administered by Samuel EPCAbility to work with others to achieve job goals Read, write and communicate using the English language sufficient to perform job functions(other preferences will be given for special language skills where there is a business need)Physical Requirements Stand or walk for long periods of time Use arms and hands to reach for, handle or manipulate objects Lift and carry materials weighing up to 50 pounds; occasionally lift items weighing more than 50pounds with assistance Climb up and down ladders, scaffolds and other objects Stoop, kneel, crouch and crawl See well (naturally or with correction) Eye−hand coordination Good physical fitness Good sense of balance Work at great heightsTool Requirements Steel toed work boots 25' Steel Tape Measure TIG Rig with Argon hose, regulator and Power Cable (only applicable when tested for TIGwelder) Welding Helmet with #10 Filter Lens & Hard Hat Attachment Leather Gauntlet−Type Welding Gloves (SMAW) Cutting Goggles With #5 or #6 Filter Lens Friction Lighter (Striker) Leather Sleeves 15' Whip (Stinger) & Ground Connector Chipping Hammer Rod Pouch 9" Side Cutters (Klein) 9-1/2" Channel Lock Pliers 12" Adjustable Wrench 12" Half Round File with Handle Allen wrench Set to3/8" 4" Screwdriver Slotted 1/4" Tip Toolbox with Lock TIG Gloves Hand Brush S/S (Scratch) Hand Brush C/S (Scratch) Raincoat or ponchoAdditional details: Provide own truck and welding source (machine must be capable of meeting welding SamuelEPC's welding standards) An agreed upon hourly rate will be paid for use of machine as long as machine is operational,rig welder responsible for all repairs to machine. Activities other than welding will be required. Sitting in trucks waiting on next welds will not bepermitted.It is good if you know a Helper that can come with you. If so please have them fill out the Helper Application on Samuelengineering.com. Job Posted by ApplicantPro

Job DescriptionCompany Description Mission Critical Group (MCG) is an end-to-end power solutions and services provider that accelerates time-to-power and delivers scalable, resilient infrastructure for mission critical environments. By integrating engineering, manufacturing, modular deployment, and lifecycle services under one platform, we streamline execution and bring complex projects online faster - without compromising performance. With a robust U.S. manufacturing network, MCG supports data centers, power generation, healthcare, oil & gas, pharmaceuticals, semiconductors, and industrial facilities where uptime is non-negotiable. Mission Critical Group designs, manufactures and provides value-added services for customers requiring critical power solutions. Powering a new electric world for a brighter, more secure future. Job Description Summary: We are seeking a highly skilled and dependable Subject Matter Expert (SME) – Tank Welding to serve as the primary technical expert for tank welding processes, standards, training, and continuous improvement. This role combines hands-on technical expertise with leadership responsibilities, including mentoring welders, troubleshooting complex welding issues, and collaborating with Engineering, Quality, and Training teams. This position may also fill in for Leads or Supervisors during planned absences. Accountabilities: Technical Expertise & Support • Serve as the primary expert on tank welding processes, material preparation, and best practices., • Guide welders in interpreting blueprints, drawings, and work orders accurately., • Train welders on correct setup, operation, and maintenance of welding equipment., • Recommend appropriate welding methods, filler materials, and procedures based on tank requirements., • Inspect and ensure all welds meet structural, quality, and JTS standards., • Troubleshoot complex tank issues and identify root causes to reduce rework., • Onboard and train new welders on proper techniques, tool usage, and safety procedures., • Partner with the training team to help create or contribute to work instructions, SOPs, and visual aids., • Serve as a mentor and knowledge resource for the team, promoting skill development and cross-training., • Monitor and uphold high standards for tank quality and accuracy., • Ensure consistent application of safety practices and PPE usage., • Support adherence to company and industry standards for tank assembly., • Collaborate with engineering, quality, and production planning teams to ensure smooth workflows and timely delivery., • Identify and support opportunities for lean manufacturing and 5S initiatives., • Work to improve the overall quality and efficiency of the tank areas using metrics and other data points., • Occasionally work in other areas of the plant to gain a broader understanding of the business., • Other duties as assigned. Process & Quality Ownership • Troubleshoot complex welding issues and implement corrective actions., • Recommend improvements to welding processes, fixtures, and tooling., • Ensure completion and accuracy of weld inspections, quality checklists, and required documentation., • Work with Engineering and Quality teams to support ISO-oriented quality systems and process accuracy. Training & Mentorship • Onboard and train new welders in welding techniques, material preparation, and safety practices., • Assist the Training Team in developing SOPs, visual aids, and instructional materials., • Serve as a mentor and subject-matter resource for welders seeking skill advancement. Safety, Compliance & Workplace Standards • Champion PPE use, welding safety practices, and hazard awareness., • Maintain a clean, organized workspace aligned with 5S principles., • Support safety programs and ensure full compliance with all safety regulations. Cross-Functional Support & Continuous Improvement • Collaborate with Production, Engineering, Planning, and Quality to achieve schedule goals., • Identify areas of waste and workflow inefficiency to support lean manufacturing improvements., • Assist other departments as needed to support broader production efforts.Qualifications, • High school diploma or equivalent (required)., • 3+ years of tank or structural welding experience in manufacturing., • Proficient with MIG (.045 wire), stick (7024 rod), and general welding equipment., • Skilled in reading blueprints, weld symbols, and technical specifications., • Ability to train and mentor welders in a production environment., • Strong accuracy, hand–eye coordination, and welding inspection capabilities., • Knowledge of PPE requirements, welding safety practices, and compliance expectations., • Ability to lift up to 50 lbs. and push/pull up to 100 lbs.; frequent kneeling, standing, and stooping., • Ability to work indoors and outdoors in all weather conditions., • Ability to pass a background check and drug screening., • Fast-paced, hands-on heavy manufacturing environment, • Frequent use of welding equipment, grinders, hoists, and power tools, • Standing, climbing, lifting, and moving throughout the day, • May require occasional overtime to meet production deadlines., • CWI (Certified Weld Inspector) preferred. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Additional Information A Note to our Recruitment Partners: We really appreciate the interest, but MCG currently manages hiring through our internal team. We love getting to know our candidates directly! Because of this, we don’t accept unsolicited resumes from agencies at this time. If we ever need an extra hand, we’ll be sure to reach out to the community. Thanks for understanding! MCG is an equal opportunity employer prohibiting discrimination based on race, color, creed, religion, sex, marital status, physical or mental disability, and any other protected classes stated by applicable federal and state laws. MCG is committed to providing equal employment opportunities to qualified individuals with disabilities and to act in accordance with regulations and guidance issued by the Equal Employment Opportunity Commission (EEOC).

Job DescriptionDescription: $500 Sign-On Bonus Job description Petrosmith a leading provider of production equipment for the oil and gas industry is currently looking for experienced Vessel and Piping Welders to join our team. Our Fabrication Shop specializes in Vessels used in the Oilfield Industry. Welders will be responsible for welding pressure vessels experience is required must be able to pass a 6G or 3G weld test. Responsibilities: • Interprets drawings and specifications, • Welds carbon steel and components using weld procedures, • Fit-up ANSI flanges to pipe, forged flanges to shells and profile nozzles to match required shell., • Lay-out nozzles and other sub assembly location in shell components, • Burns and grinds nozzle cutouts in shell to meet engineering tolerances, • Uses flame cutting torch, carbon arc gouging, plasma arc, portable grinders and other tools., • Uses overhead cranes, jib cranes and other lifting/ rigging devices to move components in a safe manner., • Completing jobs based on standard shop procedures, • Conforms to shop quality practices and procedures, • Conforms to safety requirements of the shop, • Works productively with others to help determine best solutions, • Other duties as assigned Qualifications: • Proficient in basic math including addition/ subtraction of whole numbers, fractions and decimals, • Proficient in reading a tape measure/ rulers in increments of 1/16”, • Ability to read blueprints, • Ability to understand manufacturing sequence in a vessel fabrication shop, • Ability to use various welding, grinding and fitting tools, • Ability to follow shop procedures, quality procedures and safety practices., • Ability to pass 6G or 3G welding test, • Requires pressure vessel shop fabrication experience, • Ability to lift materials job components up to 50 pounds, • Ability to arrive to work on time Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Referral programRequirements:

Job DescriptionDescription: Job description: We are looking for an experienced, skilled Welder to build Tanks both vertical and horizontal. You will operate appropriate equipment to put together structures or parts with a great deal of precision. Responsibilities • Read blueprints and drawings and take or read measurements to plan layout and procedures, • Determine the appropriate welding equipment or method based on requirements, • Set up components for welding according to specifications, • Operate angle grinders to prepare the parts that must be welded, • Align components using calipers, rulers etc. and clamp pieces, • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead), • Test and inspect welded surfaces and structure to discover flaws, • Maintain equipment in a condition that does not compromise safety Skills • Proven experience as welder, • Experience using a variety of welding equipment and procedures, • Experience in using electrical or manual tools (saws, squares, calipers etc.), • Ability to read and interpret technical documents and drawings, • Knowledge of relative safety standards Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance Shift: • 10 hour shift, • Day shift Education: • High school or equivalent (Preferred) Experience: • Welding: 3 years (Required)Requirements:

Job Description Summary: The Welder position is responsible for accurately reading and interpreting blueprints, drawings, and specifications to meet project requirements. This role involves fabricating large fuel tanks—up to 60 feet long and 13 feet wide—designed to hold 3,000 to 10,000 gallons of diesel fuel. The welder must ensure strict adherence to safety standards by wearing required PPE and following all safety guidelines throughout the process. Training & Trial Period Work Schedule (Monday–Friday) • Weeks 1–2: 6:00 AM – 3:30 PM, • Weeks 3–6: 9:00 AM - 5:30 PM, • Final 90-Day Trial Period (Full-Time Shift): 3:00 PM – 12:30 AM This position is eligible for 10% differential pay. Accountabilities: • Read and interpret blueprints, drawings, and specifications to determine welding requirements., • Prepare materials by cleaning, cutting, and positioning components for welding., • Set up, operate, and maintain welding equipment and tools., • Weld components using manual or semi-automatic equipment in multiple positions., • Inspect welds to ensure compliance with specifications and quality standards., • Complete quality checklists at each stage of the process., • Work with various metals, including steel, aluminum, and stainless steel., • Prepare surfaces by removing slag, rust, grease, and scale prior to welding., • Maintain a safe and clean work environment by following all safety protocols and wearing required PPE., • Report hazards, near misses, and unsafe conditions promptly., • Collaborate with team members and supervisors to meet production goals., • Perform other duties as assigned to support welding and fabrication operations.Attributes, • Safety First: Adheres to all safety protocols and promotes a hazard-free workplace., • Have Humanity: Works respectfully and collaboratively with team members., • Be Transparent: Communicates clearly about progress, challenges, and safety concerns., • Drive Innovation: Suggests improvements to welding processes and tools for efficiency., • Be Resilient: Adapts to changing priorities and production demands with a positive attitude., • Always Reliable: Consistently delivers accurate, high-quality work., • Grit: Handles physically demanding tasks with persistence and pride in craftsmanshipRequired Knowledge/Experience:, • High school diploma or equivalent required; welding certification preferred., • 2+ years of welding experience, preferably in manufacturing or heavy equipment., • Experience with 7024 welding rods and .045 wire MIG preferred., • Ability to read and interpret blueprints and engineering drawings., • Familiarity with welding machinery, electrical equipment, and manual tools., • Strong mechanical aptitude and attention to detail., • Knowledge of jobsite safety regulations and PPE requirements., • Reliable, responsible, and respectful team player., • Must pass a background check and drug screening.Work Environment and Physical Demands, • Manufacturing environment with exposure to indoor and outdoor conditions., • Ability to stand, kneel, stoop, or crouch for 8–10 hours per day., • Frequent use of hands for handling tools and components., • Must be able to lift up to 50 lbs and push/pull up to 100 lbs (following OSHA standards)., • Visual and auditory ability to navigate safely and communicate effectively. Powered by JazzHR M5j0VlUqx1

Job DescriptionPurpose: Secure components together using electric welding. Create accurate welds that do not change the measurements of the component and will be able to with stand various types of steam, hot water, gases, lubrications, sprinkling, and industrial processing systems. Work Schedule: Varies by location. Must have open availability any time any day of the week. Length of employment is limited to job assignment and/or project duration.Essential Skills (may include but are not limited to the ability to:) Secure components together applying knowledge of geometry, physical properties of metal machining weld shrinkage, and welding techniques. Select appropriate equipment and plan the layout and assembly of a welding process. Apply knowledge of geometry, physical properties of metal machining weld shrinkage and welding techniques. Bolt, clamp and tack−weld parts to secure in position for welding. Prepare material for welding by cutting or grinding using pipe cutters, hammer and chisel, cutting torch, and/or grinder. Set material in stands, racks, hoists, etc. for welding. Set up equipment and weld parts using arc, gas−shielded arc, submerged arc or gas welding equipment. Repair products by dismantling, straightening and reshaping. Reassemble parts using cutting torch, straightening press and hand tools. Read and understand plans, isometrics, arrangement drawings, details, specifications, erection manuals, and/or blueprints and make decisions based on measurable criteria. Visualizes objects in three−dimensions from plans and drawings. Measure, cut, bevel, grind, and fit pipe to specifications and blueprints. Pass Samuel EPC approved testing procedures for both structural and pipe welding. Fabricate for socket weld pipe from isometrics Identify pipe by size, type, and wall thickness Perform simple rigging operations Install pipe hangers, supports, anchors, and guides Work within precise limits and standards of accuracy. Follow oral and written directions Work within company policy as outlined in the Samuel EPC Craft Handbook and maintain compliance with both the Samuel EPC Human Resources Policy Manual and the Samuel EPC Safety Manual. Perform other duties as assigned by the foreman/supervisor as needed. Essential Qualifications Five (5) years minimum Field experience in trade Ability to identify all techniques of welding (TIG, MIG, arc, etc.), and know all properties of various types of metal and how heat affects them. Ability to identify the requirements for various welding tests (6g, X−ray, etc.) and to produce welds that meet each requirement. Completion of certification administered by Samuel EPCAbility to work with others to achieve job goals Read, write and communicate using the English language sufficient to perform job functions (other preferences will be given for special language skills where there is a business need) Physical Requirements Stand or walk for long periods of time Use arms and hands to reach for, handle or manipulate objects Lift and carry materials weighing up to 50 pounds; occasionally lift items weighing more than 50 pounds with assistance Climb up and down ladders, scaffolds and other objects Stoop, kneel, crouch and crawl See well (naturally or with correction) Eye−hand coordination Good physical fitness Good sense of balance Work at great heightsTool Requirements Steel toed work boots 25' Steel Tape Measure TIG Rig with Argon hose, regulator and Power Cable (only applicable when tested for TIG welder) Welding Helmet with #10 Filter Lens & Hard Hat Attachment Leather Gauntlet−Type Welding Gloves (SMAW) Cutting Goggles With #5 or #6 Filter Lens Friction Lighter (Striker) Leather Sleeves 15' Whip (Stinger) & Ground Connector Chipping Hammer Rod Pouch 9" Side Cutters (Klein) 9-1/2" Channel Lock Pliers12" Adjustable Wrench 12" Half Round File with Handle Allen wrench Set to3/8" 4" Screwdriver Slotted 1/4" Tip Toolbox with Lock TIG Gloves Hand Brush S/S (Scratch) Hand Brush C/S (Scratch) Raincoat or ponchoAdditional details: Provide own truck and welding source (machine must be capable of meeting welding Samuel EPC's welding standards) An agreed upon hourly rate will be paid for use of machine as long as machine is operational, rig welder responsible for all repairs to machine. Activities other than welding will be required. Sitting in trucks waiting on next welds will not be permitted. Job Posted by ApplicantPro

Job DescriptionDescription: Responsibilities • Grind, polish, sand and sharpen welded parts to ensure conformance to established customer needs and prints, • Maintain work area and production equipment in clean and orderly condition. Follow all safety work rules., • Handle assorted raw materials, steel parts, and steel scrap., • Performs precision smoothing, sharpening, polishing, or grinding on a variety of welded assemblies, • Responsible for the movement of necessary inventory and parts to and from the pipe department., • Assist Welders; Participate in and support continuous process improvements., • Other duties may be assigned that pertain to the classification. Skills • Proven experience with hand tools and equipment, • Experience using a variety of welding equipment and procedures, • Experience in using electrical or manual tools (saws, squares, calipers etc.), • Knowledge of relative safety standards Benefits: • 401(k), • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance Education: • High school or equivalent, • Welding certification; Technical School (Preferred) Experience • 2 years of previous equipment experience, Grinding, welding processes, • Understanding of fabrication fundamentals, and application to structural piecesRequirements:

Job DescriptionCompany Description Mission Critical Group (MCG) is an end-to-end power solutions and services provider that accelerates time-to-power and delivers scalable, resilient infrastructure for mission critical environments. By integrating engineering, manufacturing, modular deployment, and lifecycle services under one platform, we streamline execution and bring complex projects online faster - without compromising performance. With a robust U.S. manufacturing network, MCG supports data centers, power generation, healthcare, oil & gas, pharmaceuticals, semiconductors, and industrial facilities where uptime is non-negotiable. Mission Critical Group designs, manufactures and provides value-added services for customers requiring critical power solutions. Powering a new electric world for a brighter, more secure future. Job Description Summary: The Welder position is responsible for accurately reading and interpreting blueprints, drawings, and specifications to meet project requirements. This role involves fabricating large fuel tanks—up to 60 feet long and 13 feet wide—designed to hold 3,000 to 10,000 gallons of diesel fuel. The welder must ensure strict adherence to safety standards by wearing required PPE and following all safety guidelines throughout the process. Training & Trial Period Work Schedule (Monday–Friday) • Weeks 1–2: 6:00 AM – 3:30 PM, • Weeks 3–6: 9:00 AM - 5:30 PM, • Final 90-Day Trial Period (Full-Time Shift): 3:00 PM – 12:30 AM This position is eligible for 10% differential pay. Accountabilities: • Read and interpret blueprints, drawings, and specifications to determine welding requirements., • Prepare materials by cleaning, cutting, and positioning components for welding., • Set up, operate, and maintain welding equipment and tools., • Weld components using manual or semi-automatic equipment in multiple positions., • Inspect welds to ensure compliance with specifications and quality standards., • Complete quality checklists at each stage of the process., • Work with various metals, including steel, aluminum, and stainless steel., • Prepare surfaces by removing slag, rust, grease, and scale prior to welding., • Maintain a safe and clean work environment by following all safety protocols and wearing required PPE., • Report hazards, near misses, and unsafe conditions promptly., • Collaborate with team members and supervisors to meet production goals., • Perform other duties as assigned to support welding and fabrication operations. Qualifications • High school diploma or equivalent required; welding certification preferred., • 2+ years of welding experience, preferably in manufacturing or heavy equipment., • Experience with 7024 welding rods and .045 wire MIG preferred., • Ability to read and interpret blueprints and engineering drawings., • Familiarity with welding machinery, electrical equipment, and manual tools., • Strong mechanical aptitude and attention to detail., • Knowledge of jobsite safety regulations and PPE requirements., • Reliable, responsible, and respectful team player., • Must pass a background check and drug screening. Work Environment and Physical Demands • Manufacturing environment with exposure to indoor and outdoor conditions., • Ability to stand, kneel, stoop, or crouch for 8–10 hours per day., • Frequent use of hands for handling tools and components., • Must be able to lift up to 50 lbs and push/pull up to 100 lbs (following OSHA standards)., • Visual and auditory ability to navigate safely and communicate effectively. Additional Information A Note to our Recruitment Partners: We really appreciate the interest, but MCG currently manages hiring through our internal team. We love getting to know our candidates directly! Because of this, we don’t accept unsolicited resumes from agencies at this time. If we ever need an extra hand, we’ll be sure to reach out to the community. Thanks for understanding! MCG is an equal opportunity employer prohibiting discrimination based on race, color, creed, religion, sex, marital status, physical or mental disability, and any other protected classes stated by applicable federal and state laws. MCG is committed to providing equal employment opportunities to qualified individuals with disabilities and to act in accordance with regulations and guidance issued by the Equal Employment Opportunity Commission (EEOC).

Job Description Position Summary Thompson Engineering is seeking a motivated and detail-oriented Certified Welding Inspector (CWI) to join our inspection and quality assurance team. This position is responsible for performing welding inspections and ensuring compliance with applicable codes, project specifications, and industry standards across a variety of construction and industrial projects throughout the Southeast. This role requires the ability and willingness to travel to project sites, including multi-state assignments, and work in field environments as needed to support active construction operations. Key Responsibilities • Perform visual welding inspections in accordance with applicable codes and project specifications (AWS, ASME, API, etc.) • Verify compliance with approved Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) • Confirm welder qualifications and maintain required documentation, • Interpret construction drawings, welding symbols, and technical specifications, • Document inspection findings, non-conformances, and corrective actions, • Coordinate and monitor non-destructive testing (NDT) activities as required, • Prepare daily field reports, inspection summaries, and supporting documentation, • Travel to various job sites, including out-of-town and multi-state assignments, as required, • Follow established safety policies and quality control procedures, • Communicate effectively with project managers, field staff, contractors, and clients Qualifications • Current Certified Welding Inspector (CWI) certification issued by the American Welding Society (AWS), • High school diploma or equivalent required; associate degree in welding technology or related field preferred • Minimum 3 years of welding inspection experience preferred, • Working knowledge of applicable welding codes such as AWS D1.1, API 1104, and ASME Section IX, • Strong understanding of welding processes and inspection techniques, • Proficiency with Microsoft Office applications and digital reporting systems, • Strong written and verbal communication skills, • Valid driver's license with a clean driving record, • Ability and willingness to travel frequently and work extended hours based on project needs Physical and Work Environment Requirements • Ability to work in outdoor and construction site environments, • Ability to stand for extended periods and navigate uneven terrain, • Ability to lift up to 50 pounds and perform field-related tasks, • Willingness to work flexible hours, including overtime and travel assignments, based on project needs About Thompson Engineering Founded in 1953, Thompson Engineering provides quality assurance and professional services for construction projects supporting industrial, infrastructure, and community development. Our services include drilling, materials testing, construction inspection, chemistry laboratory services, engineering design, environmental assessments, surveying, geotechnical studies, and construction management. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation networks across the Southeast. From project planning and design through construction and completion, we deliver innovative solutions to complex infrastructure and building challenges for industrial, commercial, transportation, federal, and municipal clients. Equal Employment Opportunity Employer We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.

Job DescriptionDescription: Job description: Overview Petrosmith is a leading manufacturer of oilfield and industrial equipment, committed to safety, quality, and operational excellence. We build durable solutions—from tanks and skids to custom fabrication—with a team-first mindset and a zero-incident safety culture. Job Summary We’re hiring a Skid Welder to join our fabrication team. You’ll weld and assemble steel skid structures used in oilfield and industrial applications. This role is ideal for someone who values precision, teamwork, and safety. Responsibilities • Weld structural steel using MIG and Flux Core processes, • Read and interpret blueprints and welding symbols, • Fit, tack, and assemble skid frames to specification, • Operate grinders, torches, and fabrication tools safely, • Inspect welds for quality and compliance, • Maintain a clean, organized work area following 5S standards, • Follow Petrosmith’s safety protocols including PPE, hot work procedures, and hazard reporting, • Participate in daily safety meetings and toolbox talks Qualifications • 2+ years of welding experience in fabrication or industrial settings, • Proficient in MIG and Flux Core welding (Stick welding a plus), • Ability to read technical drawings and use measuring tools, • Strong attention to detail and commitment to safety, • Ability to lift up to 50 lbs and work in various positions, • Forklift or overhead crane experience preferred, • Welding certification a plusRequirements:

Job DetailsJob Location: Abilene - Tye, TX 79563Position Type: Full TimeEducation Level: 2 Year DegreeSalary Range: $20.00 - $40.00 HourlyTravel Percentage: Road WarriorJob Category: Skilled Labor - TradesAt Rocky Mountain Truck Centers (RMTC), we’re on the lookout for exceptional Diesel Technicians eager to tackle mechanical challenges head-on. This role is for those who excel in diagnosing and resolving intricate issues. If you’re committed to excellence and seek a rewarding environment, your next opportunity awaits. We invite applications from professionals with experience in: • Roadside Diesel Technician • Tire Technician • Roadside Service Technician • P.M./Lube Technician • Agricultural Mechanic • Farm Equipment Mechanic • Irrigation Technician • Welder • Mechanically Inclined CDL Driver • General Mechanic This position offers a fantastic local career opportunity. Experience with farm equipment, trailers, commercial tires, hydraulics, electrical systems, troubleshooting, diesel engines, welding, or field repairs is highly valued. We are also willing to train the right mechanically inclined candidates. Why Work With Us? • Independence & Confidence: Enjoy the autonomy of working alone while addressing diverse mechanical challenges. • Safety & Professionalism: We prioritize safety, ensuring a secure environment for you and our customers. • Performance-Driven Pay: Our Rocky Mountain Performance Pay (RMPP) program rewards you for exceeding performance standards, allowing you to maximize earnings based on expertise and productivity. Career Advancement Opportunities: At RMTC, we prioritize your career growth with clear advancement pathways, including: • Senior Roadside Technician: Lead more complex repairs and mentor junior technicians. • Shop Technician/Lead Technician: Transition to shop work for deeper mechanical engagement. • Field Trainer: Train new technicians and help them hone their skills. • Service Advisor/Coordinator Roles: For cross-skilled technicians. • Branch Manager: Oversee operations and drive team success. Training and Development: We invest in your continuous improvement with a generous annual training budget of $7,900 per technician for ongoing development and certification, including: • Access to specialized courses like Meritor and OEM training. • Opportunities to attend workshops and seminars. • Support for additional certifications. Key Responsibilities: As a Diesel Technician, your main duties will include: • Responding Quickly: Attend dispatched jobs promptly and safely. • Diagnosing Failures: Assess mechanical and electrical issues accurately and perform repairs with urgency. • Performing Repairs: Conduct repairs on diesel engines, brakes, tires, and electrical components, ensuring compliance with safety standards. • Documentation: Use digital tools for inspections and communication with dispatch. • Customer Interaction: Ensure satisfaction through professional interactions and clear explanations of repairs. Working Conditions: This role involves outdoor work in various weather conditions. Flexibility and responsiveness to changing environments are essential. Who Thrives Here? We seek technicians who demonstrate: • Calmness Under Pressure • Strong Communication Skills • Motivation to Excel • Reliability • Mechanical Strength & Resourcefulness Qualifications: To succeed, you should have experience in: • Diesel repair, roadside assistance, mechanical diagnostics, and tire service. • Proficiency with tools and a working smartphone. • A valid driver’s license with a clean MVR history. • Ability to lift 50+ lbs and work outdoors. If you prefer slow-paced environments or struggle with documentation, this role may not be for you. Why Choose RMTC? • High earning potential with a performance-driven pay structure. • Industry stability and strong leadership support. • Immediate impact and opportunities for career growth. If you’re ready to take control of your career and join a team that values skill, professionalism, and performance, apply now! At RMTC, your expertise makes a real difference. Qualifications

Now hiring for a welder in Abilene, TX. Strong hands, sharp eyes, and a welder's grit are wanted here. Looking for welder jobs in Abilene where precision welding and craftsmanship make a difference? This opportunity lets you fabricate and weld high-quality metal components while supporting safe, efficient manufacturing and production operations. If your skills and experience are a good match for this role, please apply today. This opportunity is based on a TIG welder career path and is being offered by Staffmark to qualified candidates. High school diploma or GED preferred. Technical training, vocational education, or welding certification is beneficial. Experience performing TIG welding on a variety of metals according to specifications. Ability to read blueprints, welding symbols, and fabrication drawings. Knowledge of welding equipment, measuring tools, and quality inspection procedures. Ability to safely set up welding equipment and maintain a clean work area. Commitment to workplace safety, quality workmanship, and dependable attendance. Previous TIG welding, fabrication, manufacturing, aerospace, automotive, or industrial welding experience is preferred. Experience welding stainless steel, aluminum, carbon steel, or specialty alloys is beneficial. Knowledge of weld inspection, blueprint interpretation, precision measurement, or Lean manufacturing is considered an asset. Individuals who demonstrate mechanical aptitude, attention to detail, reliability, and pride in craftsmanship are well positioned for success as a welder. Ability to stand, walk, bend, kneel, and perform repetitive welding tasks throughout the shift. Ability to lift and position materials or fabricated components weighing up to 50 pounds. Manual dexterity to safely operate welding equipment, grinders, and fabrication tools. Ability to safely work around welding equipment while wearing required personal protective equipment. Competitive weekly pay. Comprehensive benefits including medical, dental, and vision coverage. Life and disability insurance for added peace of mind. Optional 401(k) plan to help you prepare for the future. Safety-focused manufacturing environment with opportunities to expand welding certifications and technical skills. The work is very consistent and the employees are amazing - Francisco, Staffmark Associate. Strike while the iron's hot. Apply today and make every weld count. What you will do as a welder you will perform TIG welding on fabricated components, interpret blueprints and welding specifications, prepare materials, inspect completed welds, operate fabrication equipment, verify measurements, maintain welding equipment, and support safe, accurate, and efficient manufacturing operations while producing high-quality finished products. The welder supports manufacturing operations by producing clean, accurate welds that meet engineering specifications and quality standards. This role requires technical skill, patience, and strong attention to detail. A successful welder understands TIG welding processes, fabrication methods, blueprint reading, and quality inspection while maintaining safe welding practices. Reliable performance contributes directly to manufacturing success. This career offers rewarding opportunities for individuals who enjoy precision welding and fabrication. About us at Staffmark, we connect hardworking people with great companies, creating opportunities that make a lasting impact. Staffmark is an equal opportunity employer. All applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other legally protected status. Staffmark offers reasonable accommodations for qualified individuals with disabilities; contact your local branch for inquiries. Staffmark is an E-Verify employer. See our Privacy Notice for Candidates and Employees/Contractors at https://smgroupna.com/privacy-notice-for-candidates-and-employees-contractors. By applying, you consent to receive AI-generated and non-AI-generated calls, texts, or emails from Staffmark Group, its affiliates, and partners. Frequency varies and message/data rates may apply. Reply STOP to cancel or HELP for help.

Strong Compensation Package, Excellent Benefits, Career Growth This Jobot Job is hosted by: Josh Strickland Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $30 per hour A bit about us: We are looking for an experienced and dedicated Welder/Fabricator to join our dynamic team. This role will be a part of our construction division, where you will be responsible for various welding and fabrication tasks. The ideal candidate will have a strong background in MIG, Tig, and Stick welding. This position offers the opportunity to work on exciting projects that will challenge your abilities, expand your skills, and allow you to make a significant impact in the industry. Why join us? Strong Compensation Package Excellent Benefits Career Growth Job Details Responsibilities: 1. Perform welding duties using a wire welder on various metals like carbon steel and stainless steel., 2. Interpret blueprints, drawings, and measurements to plan layouts., 3. Weld components in flat, vertical, or overhead positions., 4. Operate angle grinders to prepare the parts that must be welded., 5. Set up, troubleshoot, and operate welding machines according to job specifications and welding procedures., 6. Ensure work is done safely and meets quality standards., 7. Keep your work area clean and organized., 8. Follow, create, and help maintain welding procedure specifications., 9. Conduct tests to evaluate weld quality and tolerance., 10. Regularly inspect equipment and structures, identifying any defects and implementing corrective actions., 11. Perform maintenance tasks and minor repairs on welding, brazing, and soldering equipment. Qualifications: 1. Proven experience as a Welder/Fabricator with strong mechanical aptitude., 2. Proficient in MIG, TIG, and Stick welding. Familiar with carbon and stainless steel., 3. Ability to read and interpret technical documents and drawings., 4. Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves, etc.), 5. Have basic mechanical troubleshooting skills., 6. Professional certification (e.g., an AWS welding certificate) will be a plus., 7. Ability to work independently and as part of a team., 8. Strong problem-solving abilities and a keen eye for detail. If you are a skilled Welder/Fabricator seeking a new challenge, we would love to hear from you. This is a fantastic opportunity to join a supportive team and work on innovative projects. We are looking for someone who is dedicated, reliable, and eager to take their career to the next level. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Plan, diagram and lay-out for pipe welder’s work. Experience as a Pipe Welder Journeyman in a Power Plant / Industrial setting.

Experience as a Pipe Welder Journeyman in a Power Plant / Industrial setting. Plan, diagram and lay-out for pipe welder's work.

Strong Hands Sharp Eyes And A Welder's Grit Wanted Here. Looking for Welder jobs in Abilene where precision welding and craftsmanship make a difference? This opportunity lets you fabricate and weld high-quality metal components while supporting safe, efficient manufacturing and production operations

MasTec - - Responsibilities: Install and weld natural gas pipelines and fittings; Operate welding equipment safely; Inspect and test welds to verify quality; Cut, clean, and assemble components per specs; Maintain safe work environment and compliance.

PrideStaff - - Responsibilities: Weld using Flux Core (FCAW) and MIG (GMAW) processes per specifications; Read and interpret blueprints and structural drawings; Fabricate and assemble components, ensuring precise fits and finishes; Follow all safety protocols and PPE requirements; Maintain quality

Aerotek - - Responsibilities: Weld using mig/flux techniques; Fabricate and assemble components; Read and interpret blueprints; Cut steel with oxyTorch; Weld overhead as needed.

PrideStaff - - Responsibilities: Perform daily fabrication, welding, and shop duties as assigned; Float between departments to maintain smooth production flow; Follow supervisor's instructions and adhere to safety guidelines; Maintain production safety and attendance policies; Operate overhead cran

PrideStaff - - Responsibilities: Weld using GMAW (MIG) and FCAW (Flux Core) welding processes; Read and interpret blueprints and structural drawings; Follow written and verbal instructions to complete fabrication tasks; Strictly adhere to all company safety protocols, attendance policies, and requi

Welder Job Duties: Interpret blueprints, drawings, and measurements to plan layouts.

TIG / Combo Pipe Welder Brookshire, TX | Temp-to-Hire DIHO Consulting USA LLC is seeking an experienced TIG / Combo Pipe Welder for a growing industrial manufacturing and pipe fabrication operation specializing in high-quality welded assemblies and advanced production processes.

Structural Welder Company: Southwest Electrical Contracting Services LLC Job Type: Full-Time Pay: $34. Schedule: 12–16 hour day or night shifts, working 13 consecutive days followed by 1 day off Position Summary Southwest Electrical Contracting Services LLC is seeking experienced Structural Welder

Job Summary DIHO CONSULTING USA is hiring experienced combo welders for shop work involving the fabrication of shell and tube heat exchangers and pressure vessels.

Work days/Shift Hours - if applicable: 2-2-3 / 5:00PM -5:30AM.Compensation: Starting pay ranges from $24.Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits.Responsible for troubleshooting and providing immediate

DIHO Consulting USA is seeking applicants for the TIG Welder position! The TIG Welder (Night Shift) is responsible for welding fabricated metal components and assemblies in accordance with engineering drawings, welding procedures, and quality standards.

Work days/Shift Hours - if applicable: 2-2-3 Flex / 5:30AM -5:00PM.Compensation: Starting pay ranges from $31.Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits.Responsible for leading team and troubleshooting an

TIG Welders (Stainless & Aluminum) Openings: 3 Pay: Competitive – Based on Experience Experience Required Minimum 3 years TIG welding experience Job Summary We are seeking experienced TIG Welders capable of welding stainless steel and aluminum components used in heavy equipment and trailer fabrica

Receive and inspect incoming shipments for accuracy and damage.Verify materials against packing slips and purchase orders.Accurately log received goods into inventory systems.Pick, pack, and label items for outgoing shipments.Prepare shipping documents and generate labels for carriers like UPS and F

Work days/Shift Hours - 2-2-3 / 5:30AM -5:00PM.Compensation: Starting pay ranges from $25.Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits.Responsible for troubleshooting and providing immediate preventative an

Your Next Move: From Tool Bench to Payday.Looking for Skilled Assembler jobs in Abilene where craftsmanship and precision come together? This opportunity lets you assemble quality products using hand tools, mechanical skills, and detailed work instructions while helping keep production running effic

Work days/Shift Hours - Monday - Friday 1 PM - Complete.Compensation: Starting pay ranges from $22.Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits.Additional Relevant Information:Machine Operator Experience 2

Coca-Cola Southwest Beverages - - Responsibilities: Operate industrial vehicles and equipment; Transport raw materials, full goods and/or finished goods to designated area; Load and unload designated trailers and/or route trucks; Move product and/or materials manually as required; Ensure compliance

Work days/Shift Hours - Monday-Friday 1 PM-complete.Compensation: Starting pay ranges from $16.Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits.Responsible for moving product or materials in a production or war

Advance Services Inc - - Responsibilities: Load and unload product/material from containers and trailers; Work in a fast-paced warehouse environment.

Work days/Shift Hours - Monday-Friday 9 PM-complete.Compensation: Starting pay ranges from $16.Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits.Responsible for moving product or materials in a production or war

Coca-Cola Southwest Beverages - - Responsibilities: Operate industrial forklift and other warehouse equipment; Transport raw materials, in-process goods, and finished products to designated areas; Load and unload designated trailers and route trucks; Move products and materials manually as required

Work days/Shift Hours -Monday-Friday 5 AM-complete.Compensation: Starting pay ranges from $16.Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits.Responsible for moving product or materials in a production or ware

Coca-Cola Southwest Beverages - - Responsibilities: Operate industrial vehicles and equipment; Transport raw materials, full goods and/or finished goods to designated area; Load and unload designated trailers and/or route trucks; Move product and/or materials manually as required; Ensure compliance

At Martin Sprocket & Gear, we're dedicated to producing quality mechanical power transmission components, material handling systems, and custom forgings with excellence, and we're looking for skilled.Follow production instructions:.Follow production instructions and tasks from process sheets, bluepr

Work days/Shift Hours Monday - Friday 1 PM - Complete.Compensation: Starting pay ranges from $19 to $23.Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits.Responsible for operating various manual and automated

At Martin Sprocket & Gear, we're dedicated to producing quality mechanical power transmission components, material handling systems, and custom forgings with excellence, and we're looking for skilled.Follow production instructions:.Follow production instructions and tasks from process sheets, bluepr