Welder jobs in Los Angeles, CaliforniaCreate job alerts

Job DescriptionDescription: Job Title: HVAC Technician Supervisor: Service Manager Hours: Full-Time, OT when needed Schedule: M-F, Rotating weekends and on call Exempt / Non Exempt : Non Exempt/hourly Salary/ Rate of Pay: $20+ DOE DUTIES AND RESPONSIBILITIES: • Inspect, repair, modify and install HVAC equipment including refrigeration and air conditioning compressors, receivers, condensers, chillers, water cooling towers, forced air converter units, pumps, automatic and hand valves, expansion valves and capillary tubes., • Conduct regular preventive maintenance inspections of refrigeration units, isolated heating and ventilating units, including boilers, gas and electrically operated air conditioning equipment, and make necessary adjustments or repairs; service and repair evaporative coolers., • Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls, safety valves, and automatic gas valves., • Operate a variety of hand and power tools, welder torch, vacuum pump, test equipment utilized in the trade and a motor vehicle; maintain equipment in effective and safe working condition; maintain parts and tool inventory., • Repair and rebuild semi-hermetic reciprocating compressors and compressors for centrifugal refrigeration machines., • Perform skilled electrical maintenance work in the repair, installation and alteration of HVAC equipment, components, timers, motors and wiring systems as needed; connect motors to control panels., • Test and examine boiler operations, observing meter and pressure gauges; conduct boiler water quality test and treatment; adjust boiler burner combustion., • Lubricate and pack heating, ventilation, refrigeration, and air-conditioning motors, pumps, fans, and other equipment., • Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of refrigeration and air conditioning systems; flush boilers, descale tubing; rebuild pressure and temperature safety valves and water pumps., • Install, rebuild, replace or repair fans, motors, thermostats, fuses, filters, bearings, valves, controls, gaskets and other equipment as necessary., • Maintain related records concerning time, labor and materials; maintain log of, • tasks performed and write reports as required., • Perform other duties as assigned., • Maintain regular attendance. KNOWLEDGE AND ABILITIES: KNOWLEDGE OF: • Standard practices of the HVAC and refrigeration trade., • Theory of HVAC and refrigeration systems., • Materials, methods and tools used in the operation and repair of HVAC and, • refrigeration systems., • Applicable building codes, ordinances and regulations of State and local, • authorities pertaining to HVAC, refrigeration and boilers., • Air compressors and pneumatic controls., • Cooling tower and boiler water treatment., • Manual and electrical tools and equipment applicable to the HVAC and, • refrigeration trade., • Welding and soldering techniques., • Health and safety regulations., • Basic record-keeping techniques., • Proper methods of storing equipment, materials and supplies. ABILITY TO: • Perform skilled mechanical maintenance duties in the inspection, repair,, • installation and alteration of District heating, ventilation, air conditioning and, • refrigeration systems and related equipment and facilities., • Calibrate systems., • Perform preventive maintenance and routine servicing of equipment., • Diagnose defects, and install, repair and maintain heating, ventilating, refrigeration,, • and air-conditioning units., • Follow oral and written instructions., • Operate specialized machinery, equipment and tools utilized in the repair,, • installation and maintenance of heating, ventilation, air conditioning and, • refrigeration systems., • Communicate effectively both orally and in writing., • Understand and follow oral and written directions., • Work cooperatively with others., • Work independently with little direction., • Meet schedules and time lines., • Maintain routine records and prepare reports., • Routinely lift objects weighing up to 75 pounds., • Lift heavy objects. PHYSICAL DEMANDS: • Work is performed while standing, sitting, and/or crouching for full shift., • Requires the ability to communicate effectively using speech, vision and hearing., • Requires the use of hands for simple grasping and fine manipulations., • Requires bending, squatting, crawling, climbing, reaching., • Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds., • Requires the ability to go up and down ladders, stairs, emergency exits etc., multiple times a day., • Requires activities involving being around moving machinery, exposure to marked changes in temperature and humidity, and exposure to dust, fumes and gases.Requirements:

Job Description Employee will be working for a leading Sign company in the city Anaheim. Employee Must be proficient in MIG, TIG is a plus. Must have the Ability to read and interpret blueprints. Always create and maintain a safe environment. Inspects completed welds to determine structural soundness Responsibilities/ Duties · Reading blueprints and drawings and taking measurements to plan layout and procedures. · Determining the appropriate welding equipment or method based on requirements. · Study and interpret assembly instructions. · Listen to directions from supervisors. · Determine if all parts are present. · Read and interpret blueprints and sketches. · Assemble tools and materials. · Grinding · Sanding' Work Location: • One location Job Type: Full-time Pay: $20.00 - $26.00 per hour

Job Description HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer’s need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. We are looking for a capable Welder who will be responsible for cutting and joining metals and other materials at our facilities or construction sites, using appropriate equipment. Your job will be to provide safe foundation for strong infrastructure. You should be competent in using potentially dangerous equipment following all safety precautions, have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is also required. We will provide PPE, FRC, tools and equipment. We will also pay and train on safety. Welder responsibilities are: • Explore and follow blueprints and drawings, taking measurements to plan layout and procedures, • Prepare the appropriate welding equipment or method based on requirements, • Prepare components for welding according to specifications (such as powered saws to match measurements when cutting material), • Use angle grinders to prepare the parts that must be welded, • Use manual or semi-automatic welding equipment in various positions to weld components, • Check welded surfaces and structures for flaws by testing and inspecting them, • Keep your equipment in a condition that does not compromise safety, • Travel is required (90%+) Required Qualifications: • Minimum 5 years’ experience as a Welder using Flux Core (FCAW) and Stick (SMAW), • Must have 2 years' experience in Tank Welding, • Must be able pass 2G/3G/4G Welding Test 7018/6010 and Flux Core, • Must have reliable transportation, • Must be willing to work overtime and weekends, • TWIC Card Preferred Qualifications: • Solid experience using a variety of welding equipment and procedures, such as Flux Core and Stick able to use the automatic welding equipment The Goat and the 3 o clock, • Experience with cutting torch and arc gouging, • Solid experience using electrical or manual tools, such as saws, squares, calipers and so on, • Excellent knowledge of relative safety standards and willingness to use protective clothing, such as face-shield and gloves, • Good ability to read and interpret technical documents and drawings, • Agility, professionalism, and close attention to detail, • Successful completion of a relevant apprenticeship program is required, • Professional Certification, such as AWS welding certificate, will be a bonus HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards.We are currently looking to hire a full-time Tank Builder / Welder (Nationwide) Day to Day Duties: • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matter, • To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR ikbbrtMoXf

Job Description Welder / Fabricator - $19 A specialty and industrial door manufacturing company in Pico Rivera is looking to hire Welders to start as soon as possible. • 1st shift - 6am - 2:30pm - $19, • 2nd shift - 3pm - 11:30pm - $19.50, • Monday - Friday Duties include: • MIG / ARC welding & fabrication of bullet proof doors, • Spot welding, • Measuring & cutting material, • Clean up / finishing doors, • Working with sheet metal & stainless steel, • Grinding / sanding / buffing Requirements: • 3+ years current welding experience, • Available to work overtime & weekends as needed, • Willingness to work in different departments as needed, • Must have reliable transportation, • Ability to lift up to 50 lbs, • Knowledge of power tools & hand tools, • Know how to read a tape measure and blueprints

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! WELDER III - B SHIFT Based out of Rocket Lab Headquarters in Long Beach, California the Welder III will weld and fabricate various fluid systems and sub-assembly components for the Rutherford and Archimedes Rocket engines. WHAT YOU'LL GET TO DO: • Follow procedures to set up and operate our welding systems., • Weld assemblies according to work orders, blueprints and verbal instructions., • Follow blueprints and meet product specifications within tight tolerances. YOU'LL BRING THESE QUALIFICATIONS AS A WELDER III: • 5+ years of experience in welding with a focus on advanced techniques., • Experience in industries such as Aerospace, Automotive, Shipbuilding, or Construction., • Familiarity with industry standards and codes (e.g., ASME, ANSI, ISO, D17.1)., • Proficient in various welding techniques, including manual GTAW(TIG), OTW (Orbital Tube Welding), Laser Welding, Lathe Welding., • Ability to read and interpret blueprints, schematics, and welding symbols., • Experience welding on .011 - .250. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Experience with welding on different materials such as Inconel, Monel, Stainless 300-400 series., • Experience working with 3D printed parts and exotic alloys., • Experience in metal fabrication and assembly., • Experience with Deburring and using pencil grinders., • Capable of doing welding fit ups., • Capable of supporting the grinding department. CERTIFICATIONS • Certified Welder., • Certifications in specialized welding processes (TIG / Brazing process)., • Certification for specific materials (e.g., Stainless Steel, Aluminum, Titanium, and Inconel). ADDITIONAL REQUIREMENTS: • Willing to work Monday - Thursday (3:15pm - 1:45am), • Ability to travel and communicate outside of work hours, • Must be able to work extended hours and/or weekends as needed, • Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position., • Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls., • Must be able to walk or stand for extended periods – 8 hours min, • Must be able to lift up to 25lbs. unassisted. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$30—$40 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description Mig Welding, Plasma Cutting and Fabricating Dental, Life, Medical, Retirement

Job Description WELDER ENTRY LEVEL MONDAY - FRIDAY 7:00-330 PM

Job Description Wilcox Machine Company, a Los Angeles based large job shop machine shop is searching for an individual with strong fitting/welding skills. We specialize in welding/fabrication and machining of large scale (up to 120,000 pounds), prototype and short run production parts and assemblies. Our diverse customer base spans commercial, government, and aerospace industries. We operate two shifts per day in an 80,000 square foot facility. Founded in the 1950's, Wilcox Machine continues to offer high quality, cost effective manufacturing services to all of our valued customers. Responsibilities primarily consist of fitting a variety of weldments, mostly prototype in nature, working from manufacturing drawings supplied by customers. Depending on work load, you may perform the welding as well. Also to operate as a lead person for the shop as needed. Candidates should have experience with the following: • Must be familiar with ASME Sect. IX, AWS D1.1, and AWS D17.1 codes., • Proper selection of specific weld procedures for specific applications., • Familiar with TIG, MIG, Submerged Arc processes., • Strong blueprint reading and shop math skills., • Experience with layouts of large fabrications., • Prior hands on welding experience., • Good communication skills/leadership abilities., • Prior supervision, lead man experience is beneficial. We offer competitive wages as well as medical, dental, and 401k benefits. \nCompany Description Wilcox Machine Company, has been a well-established machine shop in Los Angeles since 1956. We specialize in machining large commercial, aerospace, and government parts and assemblies, handling components ranging from a few hundred pounds to over 100,000 pounds. Our focus is on prototype and low-volume production work, and we are currently experiencing high demand with multiple large contracts and ongoing job shop work. Wilcox Machine Company, has been a well-established machine shop in Los Angeles since 1956. We specialize in machining large commercial, aerospace, and government parts and assemblies, handling components ranging from a few hundred pounds to over 100,000 pounds. Our focus is on prototype and low-volume production work, and we are currently experiencing high demand with multiple large contracts and ongoing job shop work.

Job Description Welding business searching for Ornamental fabricator welder with experience in welding and fabricating fences, gates, doors, handrails, etc. Minimum 5 years experience. No contractors or subcontractors. Only laborers. Pay is commensurate with experience and work quality. Call to schedule an interview PLEASE CALL 818-849-1026 Negocio de soldadura busca un FABRICADOR con experiencia en soldadura ornamental, y fabricador portones, pasa manos, puertas, etc. Mínimo 5 años de experiencia. Pago es basado es su experiencia y calidad de trabajo. No contratistas, se busca trabajador. LLAME AL 818-849-1026 Tipo de puesto: Tiempo completo Sueldo: $18.00 - $20.00 la hora Consideraciones ante el COVID-19: please wear mask. por favor use mascara. Tipo de puesto: Tiempo completo Sueldo: A partir de $15.00 la hora Consideraciones ante el COVID-19: Please wear a mask. Por favor de usar mascara.

Job Description Overview Tradesmen International is immediately hiring experienced Welders for projects located in the Rancho Dominguez, CA area. This is a first shift opportunity, and the pay rate is $30-32/hour based on experience and skill level. If you are a Welder and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: • Perform high-precision TIG (GTAW) welding on cooling coil systems, • Repair and rebuild UBends, • Grind and reweld joints, • Remove discoloration for proper finish and integrity, • Complete butt welds to connect UBends to fin tubes, • Weld fin tubes to headers, • Install flanges and a 90-degree elbow Responsibilities • All PPE, • Tools, and welding equipment Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job Description HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer’s need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. We are looking for a capable Welder who will be responsible for cutting and joining metals and other materials at our facilities or construction sites, using appropriate equipment. Your job will be to provide safe foundation for strong infrastructure. You should be competent in using potentially dangerous equipment following all safety precautions, have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is also required. We will provide PPE, FRC, tools and equipment. We will also pay and train on safety. Welder responsibilities are: • Explore and follow blueprints and drawings, taking measurements to plan layout and procedures, • Prepare the appropriate welding equipment or method based on requirements, • Prepare components for welding according to specifications (such as powered saws to match measurements when cutting material), • Use angle grinders to prepare the parts that must be welded, • Use manual or semi-automatic welding equipment in various positions to weld components, • Check welded surfaces and structures for flaws by testing and inspecting them, • Keep your equipment in a condition that does not compromise safety, • Travel is required (90%+) Required Qualifications: • Minimum 5 years’ experience as a Welder using Flux Core (FCAW) and Stick (SMAW), • Must have 2 years' experience in Tank Welding, • Must be able pass 2G/3G/4G Welding Test 7018/6010 and Flux Core, • Must have reliable transportation, • Must be willing to work overtime and weekends, • TWIC Card Preferred Qualifications: • Solid experience using a variety of welding equipment and procedures, such as Flux Core and Stick able to use the automatic welding equipment The Goat and the 3 o clock, • Experience with cutting torch and arc gouging, • Solid experience using electrical or manual tools, such as saws, squares, calipers and so on, • Excellent knowledge of relative safety standards and willingness to use protective clothing, such as face-shield and gloves, • Good ability to read and interpret technical documents and drawings, • Agility, professionalism, and close attention to detail, • Successful completion of a relevant apprenticeship program is required, • Professional Certification, such as AWS welding certificate, will be a bonus HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

Job Description This position is responsible for fabricating parts according to instructions and within specified time frame, using the appropriate tools and/or equipment according to safety and quality standards, as well as carrying out any other duties as directed by Team Leader or Supervisor. ESSENTIAL JOB FUNCTIONS: Primary Job Functions Weight : 70 % 1) Performs Troubleshooting and Fabrication Duties by fabricating parts as directed by Team Leader or Supervisor; by troubleshooting fabrication problems; by requesting parts and/or tools, when necessary; by performing accurate, quality fabrication in a timely manner; by performing adjustments needed to ensure factory settings and specifications; by using schematics, engineering documentation, and precedent to fabricating parts; and by submitting fabricated parts to Quality Control, appropriate Team member, or Department. 2) Maintains Tools, Equipment, and Work Space by following instructions on tool and equipment use; by reporting problems, repairs needed, and repairs performed to Team Leader or Supervisor; by performing repairs as needed; by regularly cleaning tools, equipment, and work space throughout shift; by cleaning and detailing tools, equipment, and work space at the end of every shift; and by following instructions regarding routine maintenance and/or treatment for tools, equipment, and work space. Secondary Job Functions Weight: 20 % 1) Keeps Management Informed by reporting problems immediately to management verbally or in writing, in order to avoid confusion and problems. 2) Manages Time and Resources by using Company resources in order to maximize productivity and accomplish tasks on time. 3) Complies with Established Procedures by learning and following all policies and procedures of the Department in order to work efficiently and to meet the expectations of the Company. Common Job Functions Weight: 10 % 1) Contributes to the Team Effort by being flexible in work assignments; by covering for other Staff as needed; and by accomplishing related tasks when reasonably requested. 2) Maintains Professional and Technical Knowledge by attaining job-related certification; by keeping up on industry trends; and by applying that knowledge to the job. 3) Acts on Constructive Feedback by being open to feedback from peers, supervisors, and clients. 4) Improves Processes by examining departmental work processes, research procedures, administrative procedures, etc.; and by recommending changes where appropriate. 5) Upholds Work Standards by maintaining professional conduct and appearance; by realizing one’s own limitations and to seek assistance when needed; and by using established communication channels. ESSENTIAL JOB REQUIREMENTS: Physical Requirements & Working Environment • While performing the duties of this job, the Staff Member is regularly required to sit and talk or hear. The Staff Member is occasionally required to stand, walk, use hands to pick-up, handle, or feel, and reach with hands and arms., • The Staff Member must occasionally lift and/or move up to 40 pounds., • Specific vision abilities required by this job include close vision and ability to adjust focus., • The noise level in the work environment is usually noisy (i.e., working with powered tools, moving parts, and heavy machinery)., • The Staff Member may be required to work beyond normal business hours when necessary. NON-ESSENTIAL JOB FUNCTIONS: Demonstrate commitment to an Injury-Free Environment by actively participating in company safety programs. Comply with all aspects of the corporate environmental, health, and safety program. PAY RATE: $26-$29HR Experience/Minimum Qualifications Needed Language Skills • Ability to effectively respond to questions from Management, Staff, clients, and the general public in English., • Ability to communicate verbally and in writing to individuals and groups in English. Mathematical Skills • Ability to perform addition, subtraction, multiplication, and division. Reasoning Skills • Ability to apply knowledge and sense of understanding to carry-out detailed written or oral instructions., • Ability to deal with problems involving a few concrete variable in standardized situations. Other Skills • Must be tactful, mature, flexible, and able to successfully respond to multiple work pressures. Education • High school education; or up to one month related experience or training; or equivalent combination of education and experience., • Experience working in a manufacturing and production preferred., • Experience driving forklift and using measuring tools preferred., • ISO and SAP experience a plus

Job Description Join our Team! Our employees are thriving both inside and outside of the office. We are growing faster than ever and it’s not because of what we do, but how we do it. It’s simple, our employees are our greatest asset. We value them and give them every reason to stay happy and motivated. We perform at high levels, fueled by an eclectic team. We boast a fun, energizing workplace with an emphasis on innovation, teamwork, quality work, and customer satisfaction. COMPENSATION AND BENEFITS: • Salary Range: Competitive based on Individual Experience, • Medical, Dental & Vision Coverage, • 401 K Program, • $100K Life Insurance, • Accelerated Growth Opportunities, • Access to the Largest Construction Projects, • Nationwide Offices, • A competitive and Rewarding Environment, • A Diverse and Inclusive Workplace YOUR CAREER STARTS HERE! ABOUT US: Tomarco Contractor Specialties LLP, (dba ISAT Total Support) is a pioneer in MEP subcontractor services, blending engineering expertise, manufacturing experience, and wholesale distribution. Since 1977, our commitment to innovation has led to cost reduction, faster installation, and a safer working environment for projects of all sizes worldwide. Our dynamic team of over 700 professionals specializes in MEP support design, technical VDC (Virtual Design and Construction), project management, detailing, project support, and more. We offer holistic solutions for projects of any size, and believe in a collaborative approach that streamlines the design and construction process, reducing project completion times. Headquartered in Southern California, ISAT also has offices in Northern California, Nevada, Arizona, Oregon, Washington, Utah, Georgia, North Carolina, Chicago, Atlanta, New York, Texas, and Puerto Rico. Additional expansion is expected. Job Description: Fabricate misc. steel pipe and mechanical supports according to shop drawings or engineering details utilizing FCAW or SMAW welding processes and performing these duties in a safe and timely manner with the highest quality possible. Essential Duties and Responsibilities: • Perform duties using FCAW (Flux Core Arc Welding) or SMAW (Shielded Metal Arc Welding)., • Perform welds in flat (1G), horizontal (2G), and vertical (3G) positions. (Ability to perform overhead (4G) a plus)., • Read and understand shop fabrication drawings., • Read and understand engineering details., • Ability to fabricate and assemble weldments from shop drawings and sketches., • Weldments will be in conformance with AWS D1.1, • Must be able to lift 50 pounds, climb, bend, twist, stand and reach repetitively., • Operate Various Equipment and Machinery (Grinders, Saws, Drill Press, Forklift, etc.), • Keep a Clean and Organized Workplace, • Utilize personal protective equipment such as masks, welding helmets, welding sleeves, gloves, steel toe boots, safety glasses, ear plugs, etc., • Confidently convert fractions to decimal equivalents on the spot as needed., • Maintain tools, equipment, and workspace. KEY SKILLS: · AWS D1.1 Structural Steel Certification with FCAW and SMAW Further Qualifications – The successful candidate must pass a background check. *Equal Opportunity Employer Day Shift: Monday - Friday 5:00AM - 5:00PM • Some Saturdays

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! ORBITAL TUBE WELDER II/III - B SHIFT Based out of Rocket Lab Headquarters in Long Beach, California the Orbital Tube Welder will weld and fabricate various fluid systems and sub-assembly components for the Rutherford and Archimedes Rocket engines. (Please note: this position can be hired at the Orbital Tube Welder II or Orbital Tube Welder III level) WHAT YOU'LL GET TO DO: • Develop weld schedules for OTW from tubing sizes ranging from 1/4" to 6"., • Perform tube bending, flaring, fit up, and preparation to meet project specifications and industry standards, • Read and interpret blueprints, schematics, and technical drawings to execute tubing projects accurately., • Operate and maintain orbital tube welding equipment (e.g., Orbitalum or AMI systems) to ensure high-quality welds. YOU'LL BRING THESE QUALIFICATIONS AS A ORBITAL TUBE WELDER II: • 2+ years of OTW experience in aviation, aerospace, or similar industry, • Experience working with tubing sizes ranging from 1/4" to 6"., • High school diploma or GED. YOU'LL BRING THESE QUALIFICATIONS AS A ORBITAL TUBE WELDER III: • 5+ years of OTW experience in aviation, aerospace, or similar industry, • Experience with OTW machines or automated fabrication equipment., • Knowledge of NDE (Non-Destructive Examination) processes to inspect and verify the integrity of tubing and welds. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • 8+ years of OTW experience in aviation, aerospace, or similar industry, • Certification in welding or tube fabrication., • Familiarity with industry standards such as ASME or ISO., • Solid understanding of NDE (Non-Destructive Examination) processes ADDITIONAL REQUIREMENTS • Willing to work Monday - Thursday (3:15pm - 1:45am), • Stand and walk for entire shift (8+ hours) on various work surfaces, • Climb ladders and work at elevated height small spaces, awkward positions, and tight areas as needed, • Perform repetitive motions including bending, twisting, reaching, grasping, pushing, pulling, and stooping, • Use hands with precision to handle, control, and operate tools, instruments, and equipment, • Lift, carry, push, and pull materials and equipment up to 25 lbs., • Work in varied environments including production floors, equipment areas, and field locations with exposure to noise, temperature variations, and moving machinery, • Flexibility to work extended hours, weekends, and varied shifts as operational needs require Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$25—$40 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionDescription: United Bakery Equipment (UBE), a leader in bakery equipment manufacturing, is seeking a skilled and dedicated Welder to join our team in Santa Fe Springs, CA. At UBE, we pride ourselves on producing high-quality, durable bakery equipment with a touch of warmth and tradition. Requirements: • Perform welding tasks using MIG, TIG, and stick welding techniques., • Read and interpret blueprints, schematics, and diagrams., • Fabricate and assemble metal structures and components., • Ensure all welds meet industry standards and specifications., • Maintain and troubleshoot welding equipment as needed., • Adhere to safety protocols and procedures at all times. Qualifications: • At least 1 year experience as a Welder., • Ability to weld all types of metals (aluminum, stainless steel, and cold roll steel), • Ability to read and interpret technical documents and blueprints., • Strong attention to detail and craftsmanship., • Ability to work independently and as part of a team.

Job DescriptionDescription: We are seeking a skilled Welder/Pipefitter to join our team. This role is responsible for fabricating, installing, and repairing complex piping systems and industrial structures. The ideal candidate will have strong expertise in TIG/MIG welding and the ability to work from detailed technical blueprints in various industrial environments. Requirements: Responsibilities: • Fabricating with TIG welding. Install, modify, and make repairs to pipe, towers, exchangers, furnaces, and drums., • Prepare material for fabrication. Set up equipment and weld either pipe, plate, or structural steel, • Fabricating & MIG/TIGCut, thread, and hammer pipe to spec using power tools, cutting torches, and pipe threaders/benders, • Assist the crew in manual work in various ways to maintain job progress, • Follow and work from blueprints, sketches, specifications, diagrams, schematics, work instructions, and verbal instructions. Qualifications: • 2-5 years fabricator experience required., • Must be able to pass the in-house assessment., • Able to stand for long periods of time., • Able to travel 75% of the time, • Hands-on experience in the layout, fitting, and welding of structural steel, pipe, and plate., • Must be able to lift 50 pounds., • Forklift certification (preferred) Job Type: · Full-time Experience: TIG Welding: 4 years (Preferred)Construction: 2 years (Preferred) License/Certifications: · Driver’s License (Required) · SMAW (preferred) · OSHA 30 (preferred) Alliance Industrial Refrigeration is an equal opportunity employer (EOE). Qualified applicants are considered for employment without regard to age, race, religion, gender, sexual orientation, national origin, and disability or veteran status. If you need assistance or an accommodation during the application process because of a disability, it is available upon request (Alliance is pleased to provide such assistance, and no applicant will be penalized as a result of such a request).

Job Description Summary of Position: We are looking for welders to work on fabrication, maintenance, and installation of welding projects. Other duties may include maintenance of welding equipment in shop facility. Description of Duties, Including but Not Limited To: · Aluminum MIG welding · TIG welding: steel, stainless steel, aluminum · Sheet metal fabrication · Spot welding: steel, stainless steel, aluminum · Use gas torch for welding, brazing, soldering and cutting · Work with a variety of materials · Measure for dimensional requirements, squareness, flatness, etc., using appropriate tools such as calipers, squares, mics, height gauge, and surface plate inspection · Interpret blueprints, sketches, and drawings and follow written and verbal instructions · Apply appropriate finishing: grinding, sanding, deburring, cosmetics and functional · Maintain tools and equipment · Working hours: 6AM to 2:45PM. (Longer days might be required when we are busy). Job Requirements: · Minimum (4) years welding experience · General math skills · Knowledgeable of various welding and fabrication processes, tools, and equipment. (specify as needed) · Ability to work long hours as needed · Full-time on-site role, available to work in our office in Pacoima, CA daily · Able to lift 50-70lbs as needed · Able to maintain and stay on schedule Company DescriptionThe Scenic Route is a design-build production company that provides services for the entertainment, live event, touring, museum, government and trade show industries. We offer services ranging from master planning, concept design and project management to fabrication, construction and installation. Our customer service and commitment to finding the finest solutions to even the most complex problems have made The Scenic Route one of the most sought-after creative resources in the country.The Scenic Route is a design-build production company that provides services for the entertainment, live event, touring, museum, government and trade show industries. We offer services ranging from master planning, concept design and project management to fabrication, construction and installation. Our customer service and commitment to finding the finest solutions to even the most complex problems have made The Scenic Route one of the most sought-after creative resources in the country.

Job DescriptionHermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. About The Role: As a Welder, you will play a key role in fabricating, assembling, and joining structural and piping components critical to our production and mission operations. You’ll work closely with engineering and manufacturing teams to execute precise, high-quality welds across a variety of materials, ensuring all products meet rigorous performance and safety standards. This role is hands-on and suited for an experienced professional who thrives in a fast-paced, technical, and safety-focused environment. Responsibilities • Perform precision TIG, MIG, and arc welding on carbon steel, stainless steel, and high-nickel alloys., • Interpret engineering drawings and welding symbols to ensure dimensional accuracy and conformance., • Execute high-precision laser welding on thin-gauge and high-strength alloys, maintaining tight control of heat input, distortion, and weld integrity in mission-critical hardware., • Fabricate, assemble, and pressure-test structural and piping systems supporting aerospace and defense operations., • Maintain compliance with ASME, AWS, and company weld standards, following approved procedures., • Uphold strict safety, cleanliness, and quality standards in all work areas., • Collaborate with engineering, quality, and production teams to resolve fabrication challenges., • Support continuous improvement initiatives and contribute to process optimization. Requirements, • High school diploma or GED; technical welding certification preferred., • 5+ years of experience in aerospace, defense, or high-precision fabrication., • Skilled in blueprint interpretation and all-position welding (flat, horizontal, vertical, overhead)., • Proven ability to fabricate and weld carbon and stainless structures and pipe to spec., • Must pass company-administered weld qualification tests and internal inspections., • Available to work overtime and varied shifts to meet mission timelines., • Physically able to lift 50 lbs, work at heights, and operate in confined or outdoor environments. Preferred Skills and Experience, • 5+ years of GTAW welding experience with stainless, carbon, Inconel, aluminum, or titanium., • Knowledge of ASME Section IX, AWS D17.1, or MIL-STD welding codes., • Experience in aerospace component fabrication or ground support systems., • Skilled in tube and pipe cutting, grinding, and precision assembly., • Familiar with pressure testing, inspection, and NDE methods., • Proficient with precision measuring instruments and quality documentation., • Understanding of welding metallurgy and heat control for high-integrity welds., • Familiarity with advanced tooling and fixturing practices used in precision welded assembly fabrication. Physical Requirements:, • Prolonged periods of sitting at a desk and working on a computer., • Frequent walking through office, manufacturing, and test facility environments., • Occasional standing, bending, or reaching as part of employee engagement or site walkthroughs.U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. US persons include U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITYHermeus is an Equal Opportunity Employer. Employment decisions at Hermeus are based solely on merit, competence, and qualifications, without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description • Schedule: Mon to Fri, 7 AM – 3:30 PM + overtime (Sat, 7AM–12PM as needed), • Length of assignment: Contract, • Rate: $23 - $28 per hour, • Job Type: Full-Time About the Role We’re looking for an experienced MIG & TIG Welder to join our manufacturing team. You’ll work with carbon steel, stainless steel, and aluminum, producing quality welds based on blueprints and specifications. This is a great opportunity for a welder who is confident with both TIG and MIG and enjoys hands-on work where quality and attention to detail matter. What We’re Looking For • 2+ years of TIG welding experience, • 2+ years of MIG welding experience, • Experience welding aluminum, stainless steel, and carbon steel, • Ability to lift up to 40 lbs., • Ability to read blueprints and welding symbols, • Strong attention to detail and commitment to quality, • Familiarity with welding safety procedures, • Good hand-eye coordination and manual dexterity, • Aerospace or similar manufacturing experience is preferred, but not required, • Welding certifications such as AWS or ASME are a plus, but not required, • Comfortable working around heat and in confined work areas, • Able to perform hands-on welding work for extended periods What You’ll Do • Perform TIG and MIG welding on aluminum, stainless steel, and carbon steel., • Read and follow blueprints, drawings, and welding symbols., • Prepare materials by cleaning, cutting, and shaping them before welding., • Inspect completed welds to make sure they meet quality requirements., • Operate and maintain welding equipment and tools., • Follow workplace safety procedures and keep your work area clean., • Work with the team to meet production goals and deadlines. TIG Experience You should have experience with: • TIG welding aluminum, • TIG welding stainless steel, • TIG welding carbon steel, • Reading blueprints and welding symbols MIG Experience You should have experience with: • MIG welding carbon steel, • MIG welding stainless steel, • Reading blueprints and welding symbols Welding Skills Test As part of the interview process, you’ll complete a hands-on welding test demonstrating your skills on: • Carbon steel, • Stainless steel, • Aluminum You’re welcome to bring your own welding helmet and gloves for the test. If you don’t have them, the necessary equipment will be provided. If you have at least 2 years of both MIG and TIG welding experience and are comfortable working with aluminum, stainless steel, and carbon steel, we’d like to hear from you! \nCompany Description We're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer. We're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.

Job DescriptionDescriptionThe Journeyman will perform installation and maintenance of low-sloped roof systems and membranes. Candidate will be proficient in reading and following manufacturer installation and warranty conditional specs, as well as operating within company outlined safety standards. Journeymen will creat client reports via tablet. Supports the Foreman with communication, training, and directing crew members as needed. Key Responsibilities • Install and maintain low-sloped roof systems (TPO, PVC, BUR, modified bitumen, EPDM); 3+ years’ experience preferred., • Operate tools and equipment including Leister welder, hot air gun, and propane torch (preferred)., • Follow job specs, warranties, safety guidelines, and quality standards., • Create client reports via tablet and use technology for communication/receipts., • Support Foreman with communication, training, and directing crew members. Skills, Knowledge and Expertise • Prior roofing or related trade experience is preferred but not required., • Ability to communicate professionally and effectively, • Ability to operate handheld technology such as tablets and/or smartphones Benefits • Work equipment including company vehicle, all tools and materials, • Medical, Dental & Vision Insurance, • Pet Insurance, • Short Term Disability, • Employer-matched 401(k), • Health Savings & Flexible Spending Accounts (HSA) & (FSA), • Enterprise Discounts

Job DescriptionJob Title: Aluminum Welder / FabricatorJob Description This role focuses on welding and fabricating aluminum bar and tube materials ranging from 2 feet to 20 feet in length. You will use your welding expertise and blueprint reading skills to produce high-quality fabricated components that meet precise specifications and quality standards. Responsibilities • Perform aluminum welding on bar and tube materials ranging from 2 feet to 20 feet in length, ensuring strong, clean, and structurally sound welds., • Interpret and read blueprints and fabrication drawings to understand dimensions, tolerances, and welding requirements., • Set up, operate, and adjust welding equipment and tools to complete fabrication tasks according to job specifications., • Measure, cut, fit, and assemble aluminum components prior to welding to ensure proper alignment and fit-up., • Inspect welded joints and fabricated parts for accuracy, quality, and compliance with drawings and standards., • Maintain a clean, organized, and safe work area, following all shop safety procedures and guidelines., • Collaborate with team members and supervisors to prioritize work, resolve fabrication issues, and meet production deadlines.Essential Skills, • 2 to 5 years of recent experience in aluminum welding and fabrication., • Proficiency in welding aluminum bar and tube materials in lengths from 2 feet to 20 feet., • Strong blueprint reading skills, including the ability to interpret fabrication drawings and welding symbols., • Hands-on experience with aluminum welding processes in a fabrication or shop environment., • Ability to set up and operate welding equipment and related fabrication tools safely and effectively.Additional Skills & Qualifications, • Experience working in a fabrication shop or manufacturing environment., • Attention to detail and commitment to producing high-quality welds and fabricated components., • Strong mechanical aptitude and ability to work with hand and power tools., • Capability to work independently and as part of a team in a fast-paced production setting.Why Work Here? You will join a professional fabrication environment that values craftsmanship, safety, and continuous improvement. The team culture emphasizes collaboration, reliability, and pride in delivering high-quality work. This role offers the opportunity to deepen your welding and fabrication expertise while contributing to a steady pipeline of challenging and varied projects. Work Environment This position operates in a fabrication or shop environment focused on aluminum welding and metalworking. You will work with welding machines, fabrication tools, and measuring equipment to handle bar and tube materials from 2 feet to 20 feet in length. The role typically involves standing for extended periods, handling metal components, and following standard industrial safety practices, including appropriate protective clothing and equipment as required by the shop. Job Type & Location This is a Contract to Hire position based out of Santa Fe Springs, CA. Pay and Benefits The pay range for this position is $21.00 - $25.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Santa Fe Springs,CA. Application Deadline This position is anticipated to close on Aug 28, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. \nCompany Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description HVAC Sheet Metal Welder $29.00 - $30.00 per hour / DOE Monday - Friday / 10:00am - 6:30pm OT Included We are seeking an experienced HVAC Sheet Metal Welder with 2–10 years of relevant experience in sheet metal welding and fabrication. This is a specialized role requiring experience welding and assembling thin-gauge metals, typically 16–22 gauge, for HVAC ductwork, frames, housings, and related components. The ideal candidate has strong experience in HVAC sheet metal welding and understands how to properly set and adjust welding equipment to achieve high-quality results. You are applying through Express Employment Professionals, an award-winning Staffing Firm. Responsibilities: • Weld and assemble sheet metal frames according to specifications., • Weld thin-gauge sheet metal used in HVAC applications., • Set and adjust welding equipment appropriately for 16–22 gauge materials., • Perform welding in flat, horizontal, vertical, and overhead positions., • Assist with various sheet metal fabrication projects throughout the shop., • Operate forming and brake machines to bend and shape metal., • Read and follow specifications, drawings, and work instructions., • Support production needs and perform other shop duties as assigned., • Maintain a clean, organized, and safe work area. Requirements: • 2–10 years of hands-on HVAC sheet metal welding/fabrication experience., • Proven experience welding thin-gauge sheet metal (16–22 gauge)., • Strong understanding of how to set welding equipment for thin materials., • Experience working with sheet metal such as steel, aluminum, or copper., • Experience welding in flat, horizontal, vertical, and overhead positions., • Experience with sheet metal fabrication, forming, and brake machines., • Ability to read and work from specifications and drawings., • Strong attention to detail and commitment to quality and safety. Benefits of Working with Express: • Weekly pay and immediate benefits., • Evaluation-to-hire opportunities., • Personalized job matching and interview preparation., • No fees for applicants., • Quick hiring process. Positions fill fast – Apply today! #2184

Job Description POSITION OBJECTIVE AND SUMMARY Coordinates and oversees the daily activities of Welding Department that includes performing various welding techniques per blueprints or drawings. ESSENTIAL DUTIES AND RESPONSIBILITIES Under general guidelines of management, · Perform TIG/ARC welding plans, creates, and develops welding techniques, procedures, instructions, and sequences. · Production support for quality and cost improvement initiatives. · Controls all welding procedure and performance qualifications. · Inspects fabrication and assembly areas and checking, bends and mounts tubing. · Proper and safe operation of hand tools and cut-off saw. · Provide guidance and supports to Skid Assemblers. · Interface/Interact with Purchasing to procure materials for assigned jobs. · Prepare and produce weekly progress reports. · Other related duties as assigned. QUALIFICATIONS To perform this job successfully, the individual must be able to perform each essential duty satisfactorily with reasonable accommodation in the areas outlined below. EDUCATION Prefer High School or GED; equivalent work experience may be substituted for education. EXPERIENCE Requires a minimum 2 years of welding experience and a thorough knowledge of various welding techniques. KNOWLEDGE Must know basic math and basic measuring techniques. SKILLS AND ABILITIES Ability to read and understand blueprints, drawings and work orders; aptitude to learn to use hand tools, power hand tools, templates, and jigs. Certified TIG and MIG welding. Certified forklift driver helpful but not required. Ability to follow verbal and written instructions. Must possess leadership ability; be organized and detail-oriented. Company DescriptionMee Industries Inc. was founded in 1969. The company is a leader in developing and manufacturing fog systems for a variety of applications. MeeFog systems are used for cooling gas turbines for the power industry and for humidifying and cooling manufacturing facilities, greenhouses, and wine barrel storage facilities that need a controlled environment. MeeFog systems are also used for special effects to create a cloud or fog effect for landscapes, amusement parks and zoos.Mee Industries Inc. was founded in 1969. The company is a leader in developing and manufacturing fog systems for a variety of applications. MeeFog systems are used for cooling gas turbines for the power industry and for humidifying and cooling manufacturing facilities, greenhouses, and wine barrel storage facilities that need a controlled environment. MeeFog systems are also used for special effects to create a cloud or fog effect for landscapes, amusement parks and zoos.

Job DescriptionWELDING & FABRICATION TECHNICIAN Los Angeles, CA | LAX AirportPay Rate: $35.00-$38.50/hour 6-Month Contract | Potential Contract-to-Hire Full-Time | 40 Hours/Week KEEP CRITICAL AIRPORT EQUIPMENT MOVING Our client is seeking an experienced Welding & Fabrication Technician / Industrial Maintenance Technician to support maintenance and repair operations at Los Angeles International Airport (LAX). This is a senior-level, hands-on position combining mechanical troubleshooting, industrial equipment repair, welding, fabrication, and preventive maintenance. The ideal candidate has a strong mechanical background and at least five years of maintenance or equipment repair experience, along with hands-on welding and fabrication experience. This is a 6-month contract opportunity with the potential to convert to a permanent position based on performance and business needs. SCHEDULE Candidates must be flexible and able to work 1st, 2nd, or 3rd shift, including weekends and holidays, as operational needs require. • 1st Shift: 5:00 AM-1:30 PM, • 2nd Shift: 1:00 PM-9:30 PM, • 3rd Shift: 9:00 PM-5:30 AMImportant: This position regularly works outdoors on the airport tarmac around aircraft and heavy equipment. Required PPE and safety training will be provided. Employees must follow all airport and workplace safety procedures. WHAT YOU'LL DO • Troubleshoot, diagnose, maintain, and repair mechanical equipment and systems supporting airport operations., • Perform scheduled, unscheduled, emergency, preventive, predictive, and corrective maintenance., • Diagnose and repair mechanical, pneumatic, and hydraulic equipment and systems., • Fabricate, modify, join, and repair equipment, fixtures, brackets, guards, supports, and other metal components., • Perform MIG, TIG, Stick, and other applicable welding processes according to specifications and safety requirements., • Read and interpret blueprints, mechanical drawings, schematics, technical manuals, specifications, and work orders., • Identify equipment issues and recommend appropriate repairs or corrective actions., • Accurately document maintenance, repair, welding, and fabrication activities using a CMMS., • Communicate critical equipment conditions and repair needs to supervisors., • Safely operate hand and power tools, welding equipment, measuring devices, forklifts, lift equipment, and authorized company vehicles., • Follow established safety, housekeeping, hazardous-material, and airport operating procedures.WHAT WE'RE LOOKING FOR, • 5+ years of experience in industrial maintenance, mechanical repair, equipment maintenance, or a related skilled technical field., • Previous hands-on welding and fabrication experience is required., • Welding certificate or equivalent recognized welding training., • Experience with MIG, TIG, and/or Stick welding., • Strong mechanical troubleshooting and repair skills., • Experience working with mechanical, pneumatic, and/or hydraulic systems., • Ability to fabricate, modify, and repair metal components and structures., • Ability to read blueprints, mechanical drawings, schematics, and technical documentation., • Valid driver's license., • Ability to obtain required airport security clearance., • Ability to work any of the three shifts, including weekends and holidays as needed.PREFERRED EXPERIENCE, • High school diploma or GED., • Technical, vocational, or military maintenance training., • Welding experience with aluminum and stainless steel., • Familiarity with PLC-controlled equipment and electrical schematics., • Experience maintaining airport, industrial, material-handling, manufacturing, or heavy equipment., • Experience using CMMS software., • Strong communication, documentation, and problem-solving skills.PHYSICAL & WORK ENVIRONMENT REQUIREMENTS This is an active, hands-on industrial position. Candidates must be comfortable: • Standing and walking for extended periods., • Bending, stooping, kneeling, crouching, reaching, and working in confined areas., • Climbing ladders and working at heights when required., • Regularly lifting and moving up to 50 pounds., • Working outdoors in varying weather conditions., • Working around aircraft, moving vehicles, heavy equipment, mechanical systems, sparks, welding fumes, and loud noise., • Following strict airport and workplace safety requirements.WHY CONSIDER THIS OPPORTUNITY? This is an excellent opportunity for an experienced maintenance and welding professional who enjoys hands-on troubleshooting and repair work. You'll use your mechanical, welding, and fabrication skills in a unique airport environment while supporting equipment and systems essential to daily operations. If you have at least five years of mechanical or industrial maintenance experience combined with hands-on welding and fabrication experience, we encourage you to apply. #IND1#ZR

Job Description SUMMARY Experienced TIG/MIG welder proficient in reading drawings with technical weld symbols and GD&T, knowledge metal cutting processes and equipment, skilled on assembling components using fit-up and tack welding and fabrication techniques. This role is essential in building high-quality metal structures, parts, and assemblies to support our production needs. candidate must have experience welding aluminum, stainless steel, inconels and carbon steel. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* ESSENTIAL DUTIES & RESPONSIBILITIES • Read and interpret blueprints, technical drawings, and welding symbols, • Measure, cut, and assemble metal components using various tools and equipment (e.g., saws, grinders, plasma cutters and oxy/acetylene torches), • Perform MIG and (or) TIG welding on steel, aluminum, stainless, inconel and titanium materials, • Fabricate parts or structures according to design specifications and tolerances, • Operate machinery such as shears, press brakes, overhead cranes, forklift and handheld tools, • Inspect welded surfaces and structures for flaws and correct defects as needed, • Maintain a clean, organized, and safe work environment, • Follow safety procedures and wear appropriate personal protective equipment (PPE), • Collaborate with other team members to meet project deadlines and quality standards EDUCATION & EXPERIENCE • Trade school or technical certification preferred but not required, • Proven experience as a welder/fabricator (5+ years), • Proficient in MIG and TIG welding techniques, • Ability to read and interpret fabrication drawings and blueprints, • Application of GD&T, • Strong attention to detail and quality control, • Knowledge of materials (mild steel, stainless steel, aluminum, titanium,inconel), • Familiarity with safety procedures and regulations in a fabrication environment PHYSICAL REQUIREMENTS • Ability to lift up to 50 pounds and perform repetitive tasks., • This is a physical role., • Stand fora long period WORK ENVIRONMENT • This position operates in a warehouse/shop/manufacturing environment. TRAVEL REQUIREMENTS • No travel required for this position. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description Certified Structural Welder Location: Downey, CA Position Type: Full-Time / Contract Shift: First Shift. Must be able to work at least 50 hours per week. Job Summary We are seeking an experienced, AWS Certified Structural Welder to join our team for an industrial conveyor installation and modification project in Downey, CA. This role is responsible for high-quality structural welding of conveyor frames, platforms, and associated industrial steel structures. Candidates must hold active AWS certifications for SMAW (Stick) welding utilizing both 7018 and 6011 electrodes. Key Responsibilities • Perform structural SMAW (Stick) welding on conveyor systems, platforms, and structural steel supports according to project specifications., • Utilize 7018 (low-hydrogen) and 6011 (fast-freeze) rods to achieve clean, high-penetration structural welds that pass visual and non-destructive testing., • Read and interpret blueprints, welding symbols, and layout schematics to accurately position and secure structural components., • Perform layout, alignment, and fit-up of structural steel components prior to welding., • Measure, mark, and cut material accurately using standard fabricator tools (tape measures, squares, torches, and grinders)., • Maintain a safe and clean work environment, strictly adhering to site-specific safety guidelines and PPE requirements. Required Qualifications & Experience • Certifications (Strictly Required): Must possess current, verifiable AWS Welding Certificates for SMAW (Stick) 7018 and 6011., • Electrode Expertise: Direct experience welding with 7018 and 6011 rods in flat, horizontal, and vertical positions., • Measurement Skills: Strong mathematical and measurement skills. Must be highly proficient at reading a tape measure down to $1/16"$ increments and performing basic fractional calculations on the deck plate., • Blueprint Reading: Ability to read and execute structural steel fabrication blueprints and weld symbols., • Tools: Proficient with standard metalworking tools, including angle grinders, cutting torches, and clamping devices., • Physical Requirements: Ability to lift up to 50 lbs, climb ladders, and work comfortably in an active industrial/construction environment., • Reliability: Must have reliable transportation to the job site in Downey, CA. Vetting & Submission Note: Proof of current AWS certifications must be provided at the time of application. In alignment with project screening standards, candidates will also be required to validate basic fraction math and tape measure proficiency (down to 1/16) prior to dispatch. Benefits: • Health insurance, • Paid holidays, • Paid sick leave The benefits listed above are subject to eligibility requirements To see a list of more available jobs, please visit www.leadstaff.com/jobs/ About LEAD Staffing Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. \nCompany Description Our mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients. Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. Our success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. Our mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients.\r\n\r\nLead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees.\r\n\r\nOur success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience.\r\n\r\nLEAD is proud to be an Equal Opportunity and Affirmative Action Employer. \r\n\r\nLEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.

Job Description The Sales Engineer/Estimator holds the pivotal role of promptly responding to Requests for Quotations (RFQs) by engaging with customers and meticulously estimating the diverse range of materials, labor, components, and outside services essential to craft comprehensive quotes that align precisely with our customers' requirements. This position orchestrates a wide spectrum of projects, collaborating seamlessly with Purchasing, Fabrication, Assembly, and Installation departments to ensure seamless adherence to project specifications, encompassing quality, cost-efficiency, and timeliness. Requirements Key qualifications for this role include: • minimum of 5 years' experience in estimating industrial machinery within a manufacturing setting, showcasing expertise in various contract types like Lump Sum, Time and Materials, Fixed Fee/Cost Reimbursable, and adeptness in discerning labor, material, and time necessities through proposal, blueprint, and specification analysis., • Proficiency in developing detailed Bills of Materials for Skids, Piping, Storage Tanks, Vessels, and Ducting, coupled with intermediate-level skills in Microsoft Project, Word, and Excel, is essential., • Additionally, the ideal candidate should demonstrate strong project management skills, alongside impeccable mathematical acumen and a knack for fostering relationships, instrumental in driving customer satisfaction, retention, and sales revenue. Moreover, the role demands the ability to make informed decisions encompassing complex sales/profit dynamics, adeptness in scrutinizing subcontractor and vendor quotes, conceptual estimating, and quantity take-offs. Adaptability to evolving priority needs, the capability to bid on turnkey projects encompassing multiple work disciplines (e.g., Pipefitter, Millwright, Welder, Fabricator), and knowledge of fabrication methods are crucial attributes. While a Bachelor's degree in Mechanical Engineering, Mathematics, or a related field is advantageous, experience in estimating equipment like Plating Lines, Washer Systems, Tanks, Piping, Water Treatment Systems, Pump and Filtration Skids, and familiarity with fabrication methods serve as additional assets for this role.

Job DescriptionWelderSchedule: M-F 7am-3:30pm w/OT Saturday 7am-12noon Hourly rate: $23hr-$27hr DOELocation: San Fernando Valley Qualifications:• Proven experience as a GTAW (TIG) Welder. • Proficiency in welding steel, stainless steel, and aluminum., • Ability to read and interpret blueprints and welding symbols., • Strong attention to detail and commitment to quality workmanship., • Familiarity with safety standards and procedures in a welding environment., • [Optional] Certification(s) in welding (e.g., AWS, ASME) is a plus but not necessary.

Job Description Our employees are thriving both inside and outside of the office. We are growing faster than ever and it’s not because of what we do, but how we do it. It’s simple, our employees are our greatest asset. We value them and give them every reason to stay happy and motivated. We perform at high levels, fueled by an eclectic team. We boast a fun, energizing workplace with an emphasis on innovation, teamwork, quality work, and customer satisfaction. COMPENSATION AND BENEFITS: • Salary Range: Competitive based on Individual Experience, • Medical, Dental & Vision Coverage, • 401 K Program, • $100K Life Insurance, • A competitive and Rewarding Environment, • A Diverse and Inclusive Workplace YOUR CAREER STARTS HERE! ABOUT US: Tomarco Contractor Specialties LLP, (dba ISAT Total Support) is a pioneer in MEP subcontractor services, blending engineering expertise, manufacturing experience, and wholesale distribution. Since 1977, our commitment to innovation has led to cost reduction, faster installation, and a safer working environment for projects of all sizes worldwide. Our dynamic team of over 700 professionals specializes in MEP support design, technical VDC (Virtual Design and Construction), project management, detailing, project support, and more. We offer holistic solutions for projects of any size, and believe in a collaborative approach that streamlines the design and construction process, reducing project completion times. Job Description: As we continue to advance in the dynamic field of construction, we are excited about the prospect of you contributing your skills and expertise to our team. Your role as a Warehouse Associate/Grinder will play a crucial role in a range of tasks to support the fabrication and welding processes. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Keeps the shop space and equipment clean, well-maintained, and organized., • Adheres to safety protocols for the proper storage and disposal of materials., • Actively participates in the manufacturing and fabrication of finished metal products., • Utilizes welding and fabrication techniques to meet project requirements., • Installs and repairs various equipment and components using welding and fabrication skills., • Collaborates with the team to ensure accurate and efficient installations., • Reads and interprets blueprints to understand project specifications., • Follows provided blueprints to ensure accurate fabrication and welding., • Calculates material measurements to verify compliance with product specifications., • Ensures precision in cutting, welding, and assembling metal components., • Conducts tests to evaluate the quality and tolerance of welds., • Performs quality checks to ensure products meet established standards., • Maintains a clean and orderly work area to ensure a safe and efficient working environment., • Adheres to cleanliness standards for tools, equipment, and workspaces., • Capable of completing work under minimal or no supervision., • Demonstrates a high level of self-motivation and initiative., • Adheres to safety regulations and wears appropriate PPE at all times., • Ensures that all team members comply with PPE requirements. KEY SKILLS: • High School Diploma/GED, • AWS D1.1 Structural Steel Certification with FCAW and SMAW is preferred but not required. Further Qualifications – The successful candidate must pass a background check. *Equal Opportunity Employer Second Shift: 5:00 PM - 5:00 AM

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR 5J2blItDOl

Job Description Job Overview We are seeking a highly skilled and motivated TIG Welder to join our manufacturing team. You will be using specialized equipment to weld & assemble new Tube Duct & Sheet Metal. ESSENTIAL FUNCTIONS Perform precision TIG welding on a variety of metals including stainless steel, aluminum and carbon steel. Follow blueprints to meet product specifications Weld process as per AWS D17.1 Prepare and align metal components before welding, ensuring proper fit and measurement. Conduct tests to evaluate weld quality and tolerance Assist in training and developing others within the team Operate welding equipment including TIG machines, grinders, and buffing tools. PROCEDURES AND RESPONSIBILITIES Ensure all welding work meets blueprint, dimensions, tolerances and quality standards. Regulate gas flow and pressure using cylinder gauges or valves. Maintain safety protocols and ensure proper operation of welding equipment Communicate effectively with supervisors, engineers, quality inspectors, and coworkers Responsible for keeping equipment clean and orderly An effective candidate must have the ability to meet tight deadlines and have strong interpersonal skills. Strong analytical and critical thinking skills. Must be detailed oriented. Learn and adhere to company policies and quality processes as well as safety requirements. Excellent written and verbal communication skills Must establish and maintain a professional working relationship with external and internal teams. May perform other duties as assigned. PERIPHERAL DUTIES 1. Interact with organizational team members and other departments in a professional manner., 2. Assists in formulating a strategic plan., 3. Perform other duties as assigned. WORKING CONDITIONS Manufacturing environment; may be exposed to loud noises, unique smells, changing temperatures, machinery with moving parts and other dangers associated with manufacturing (cutting, deburring, etc.). CPI has safety equipment and safety standards in place to help maintain a safe work environment. WORKING HOURS Monday – Friday 7:00 AM – 3:30 PM. Overtime maybe required on an as needed basis. Company DescriptionAerospace Manufacturing Company that builds Tube and Duct Assemblies for Airplanes, Missiles and SatellitesAerospace Manufacturing Company that builds Tube and Duct Assemblies for Airplanes, Missiles and Satellites

Job Description Now hiring a TIG Welder for the city of Los Angeles, CA! Job Type: Full-Time Schedule: Monday–Friday 7am-3:30pm (Saturdays & Overtime as needed) Payrate: $19.50 to start (Depending on Experience) Location: Los Angeles We are seeking a skilled and experienced TIG Welder to join our manufacturing team. The ideal candidate has experience welding stainless steel, aluminum, and other metals while producing high-quality welds. The TIG Welder will read blueprints, prepare materials, inspect finished work, and maintain a safe and organized work environment Responsibilities • Perform TIG welding on stainless steel, aluminum, and other metals., • Read and interpret blueprints, work orders, and welding symbols., • Set up and operate TIG welding equipment safely and efficiently., • Prepare materials by cutting, grinding, fitting, and cleaning parts prior to welding., • Inspect completed welds to ensure quality and dimensional accuracy., • Use measuring tools including calipers, tape measures, squares, and gauges., • Perform minor equipment maintenance and report repair needs., • Follow all company safety procedures and OSHA guidelines. Long term - Temp to Hire company! For more information please call 3109350880 Address: 4433 Slauson Ave, Maywood, CA 90270

Job Description TIG Welder Job Type: Full-Time Schedule: Monday–Friday 7 am - 3:30pm (Saturdays & Overtime as needed) Payrate: $19.50 to start (Depending on Experience) Location: Los Angeles We are seeking a skilled TIG Welder to join our manufacturing team. The ideal candidate has experience welding stainless steel, aluminum, and other metals while producing high-quality welds that meet engineering specifications and quality standards. The TIG Welder will read blueprints, prepare materials, inspect finished work, and maintain a safe and organized work environment Responsibilities • Perform TIG welding on stainless steel, aluminum, and other metals., • Read and interpret blueprints, work orders, and welding symbols., • Set up and operate TIG welding equipment safely and efficiently., • Prepare materials by cutting, grinding, fitting, and cleaning parts prior to welding., • Inspect completed welds to ensure quality and dimensional accuracy., • Use measuring tools including calipers, tape measures, squares, and gauges., • Perform minor equipment maintenance and report repair needs., • Maintain a clean and organized work area., • Follow all company safety procedures and OSHA guidelines., • Collaborate with production and quality teams to meet production schedules.

Job Description Hydraulics International, Inc. (HII) is seeking an experienced TIG Welder to join our manufacturing team. The TIG Welder will be responsible for setting up and operating welding equipment to produce high-quality welded assemblies in accordance with engineering drawings, specifications, and company quality standards. The ideal candidate will have 3–5 years of TIG welding experience, strong blueprint-reading skills, and experience welding precision metal components in a manufacturing environment. Key Performance Deliverables • Set up and operate TIG welding equipment to weld metal components and assemblies., • Perform TIG welding on materials such as stainless steel, aluminum, and carbon steel., • Read and interpret blueprints, engineering drawings, welding symbols, and work instructions., • Prepare parts for welding by cleaning, cutting, fitting, and positioning materials., • Select the appropriate welding equipment, settings, filler materials, and techniques based on job requirements., • Inspect completed welds for accuracy, strength, penetration, appearance, and conformance to specifications., • Use measuring tools and inspection equipment to verify dimensions and tolerances., • Identify welding defects and make necessary repairs or adjustments., • Maintain welding equipment and report any equipment concerns or maintenance needs., • Complete required production and quality documentation accurately., • Follow company safety procedures and maintain a clean and organized work area., • Work collaboratively with Production, Engineering, and Quality personnel to resolve manufacturing issues., • Support continuous improvement initiatives related to safety, quality, productivity, and efficiency., • Perform other duties as assigned.Requirements, • 3–5 years of TIG welding experience in a manufacturing environment., • Experience welding stainless steel and aluminum is strongly preferred., • Ability to read and interpret blueprints, welding symbols, and technical drawings., • Knowledge of welding procedures, materials, filler metals, and equipment settings., • Ability to use measuring tools such as calipers, micrometers, and gauges., • Ability to produce clean, consistent, and high-quality welds., • MIG welding experience is a plus., • Aerospace, defense, hydraulic, or precision manufacturing experience is preferred., • Strong attention to detail, quality, and accuracy., • Ability to follow written and verbal instructions., • Ability to work independently and as part of a team., • Must be dependable and able to meet production schedules.Physical Requirements, • Ability to stand, bend, reach, and work in various positions for extended periods., • Ability to lift and move materials weighing up to 40 pounds., • Ability to use welding equipment, hand tools, and measuring instruments safely., • Ability to wear required personal protective equipment. Schedule: M-F 7am-3:30pm Salary Expectations: $25- $27 HR. We offer competitive compensation & benefits package: • Health insurance (Dental, Vision, & Life Insurance), • 401(k), • PTO About HII: HII headquartered in Chatsworth, California, U.S.A., is a leading supplier of integrated products, services and support to military forces, aviation and commercial industries, Government agencies and prime contractors worldwide. Focused on defense and commercial technology, the Company develops manufactures and supports a broad range of systems for over one hundred industries as well as mission critical and military sustainment requirements worldwide. We are extremely proud of the fact that our extensive design capabilities enable us to produce the most sophisticated units known to today's technology. Our corporate, engineering and manufacturing facilities, located in Chatsworth, CA and Forsyth, GA, encompass over 625,000 sq. feet. Our manufacturing facility is equipped with the latest state-of-the-art equipment such as CNC lathes and mills, computerized tube bending, and automatic press brake and programmable punch press, laser topography scanners, and other quality verification devices. HII has combined the greatest talent, skill, and equipment to best service our customers' demands. HII is an Equal Employment Opportunity Employer and strictly prohibits discrimination and harassment against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibits discrimination and harassment against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability (including physical, emotional, and mental health), or status as a protected veteran. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact (818) 998-1231x2200 for assistance.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will be responsible for helping set up, operate, and optimize K2 Space's development shop. This pivotal role will support development projects which will inform the design of our Mega Class satellite. You will work closely with engineering teams and operations management to fabricate tooling and ground support equipment. You will be highly motivated, detail oriented, and execute at the highest level. Responsibilities • Support the establishment of the K2 Space Development shop, including the selection and initial set up of equipment, • Perform Class A weld quality, including TIG, MIG, and other specialized welding processes, • Process sheet metal utilizing water jet cutting, and various other machine tools, • Operate a wide variety of fabrication equipment (CNC press brake, shear roller, mill, lathe, horizontal and vertical bandsaw, and sanding equipment), • Troubleshoot issues with equipment and perform preventative maintenance, • Identify and self-start projects that improve the overall program success and progress, • Inspect finished products to ensure they meet the highest quality standards, • Communicate with engineering teams and leadership for general alignment, capability, and support prioritization, • Maintain a clean, organized, and safe working environment in compliance with EH&S standards, • Consistently provide process improvement ideas and design feedback to improve manufacturability Qualifications • 5+ years of experience with Class A TIG/MIG welding and thin sheet metal, • 5+ years of experience with sheet metal fabrication and forming experience, • Strong proficiency in GD&T tolerances and technical drawing interpretation Nice to Have • Experience working in a space hardware development program, • Experience working in a high-pace development environment with ability to adapt to short production schedules, • Operate with a high sense of urgency, with strong attention to detail and strong communication skills Additional Requirements • Must be able to work extended hours and/or weekends as needed, • Must be able to perform repetitive tasks such as bending or twisting, grasping, standing, lifting, pulling, pushing, stooping, stretching, carrying, and use hands to operate tools or equipment, • Must be able to stand for extended periods of time, • Must be able to lift up to 50 lbs. unassisted Compensation and Benefits: • Hourly rate range for this non-exempt role is $30 – $42 + equity in the company, • Compensation will be based on several factors including, but not limited to: knowledge and skills, education, and experience level, • Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionJob Title: TIG WelderJob Description This role focuses on performing precise TIG welding on stainless steel, aluminum, and carbon steel in a machine shop environment while adhering to blueprints, tight tolerances, and established quality standards. You ensure welding work meets engineering specifications, maintain safe and reliable equipment operation, and support a high-performance team by communicating clearly and following all company policies, quality processes, and safety requirements. Responsibilities • Execute precise TIG welding on stainless steel, aluminum, and carbon steel in accordance with engineering and production requirements., • Interpret and follow blueprints to ensure all product specifications, dimensions, and tolerances are met., • Carry out welding tasks in compliance with AWS D17.1 standards and established quality procedures., • Set up and position metal components before welding, ensuring accurate fit, alignment, clamping, and tack welding prior to final welds., • Adjust gas flow and pressure accurately using cylinder gauges or valves to achieve proper weld quality., • Perform tests and inspections to assess the quality and tolerance of welds, identifying and correcting defects as needed., • Operate TIG welding machines, grinders, and buffing tools safely and effectively to complete assigned tasks., • Ensure all welding work complies with blueprints, specified dimensions, tolerances, and established quality standards., • Uphold safety procedures at all times and verify that welding equipment is operating correctly before and during use., • Keep welding equipment and work areas clean, organized, and well-maintained to support efficient operations., • Communicate clearly and effectively with supervisors, engineers, quality inspectors, and fellow team members to resolve issues and coordinate work., • Build and maintain professional working relationships with internal and external teams to support smooth production flow., • Demonstrate the ability to meet tight deadlines while maintaining high-quality standards and strong interpersonal skills., • Apply strong analytical and critical thinking skills with keen attention to detail when reviewing specifications and performing welds., • Learn, understand, and consistently follow company policies, quality processes, and safety requirements., • Support team development by assisting with training initiatives and sharing best practices with colleagues., • Take on additional duties as assigned, showing flexibility and willingness to support the team and production goals.Essential Skills, • Proven experience performing TIG welding on stainless steel, aluminum, and carbon steel., • Ability to interpret and follow detailed blueprints and engineering drawings., • Working knowledge of AWS D17.1 welding standards and the ability to apply them in daily work., • Strong tube welding and fabrication skills, including fit up, alignment, clamping, and tack welding of metal components., • Proficiency in setting up welding equipment, including adjusting gas flow and pressure using cylinder gauges or valves., • Experience operating TIG welding machines, grinders, and buffing tools safely and effectively., • Strong analytical and critical thinking skills with a high level of attention to detail., • Excellent written and verbal communication abilities to collaborate with supervisors, engineers, quality inspectors, and team members., • Ability to meet tight deadlines while maintaining high-quality workmanship., • Capability to perform quality checks and tests to assess weld quality and tolerances., • Physical ability to stand for the majority of the shift and lift up to 25 pounds., • Willingness to work overtime, including occasional Saturday shifts or earlier start times as needed.Additional Skills & Qualifications, • Experience working in a machine shop or manufacturing environment, ideally within aerospace or precision fabrication., • Familiarity with blueprint reading, basic programming, and troubleshooting related to welding processes and equipment., • Comfort supporting training and skill development for team members., • Flexibility to work different shifts, including second shift and temporary training shifts., • Ability to adapt to varying production demands and changing priorities.Why Work Here? You join a precision-focused aerospace manufacturing environment that values quality, safety, and teamwork while offering a comprehensive benefits package. You benefit from a 401(k) and retirement plan, as well as health, dental, and vision insurance, supported by a health savings account and life insurance. You enjoy paid time off and parental leave, helping you balance work and personal life. You work in a setting that promotes professional growth, continuous learning, and collaboration across engineering, quality, and production teams. Work Environment You work in a machine shop environment focused on aerospace manufacturing, operating TIG welding machines, grinders, and buffing tools. You stand for most of your shift and handle materials up to 25 pounds, following strict safety and quality procedures. Standard day shift hours are 7:00 a.m. to 3:30 p.m., with overtime that may include Saturday shifts from 7:00 a.m. to 12:00 p.m. or earlier daily start times as needed. A regular second shift typically runs Monday through Friday from 3:30 p.m. to 12:00 a.m., with overtime as required, and a temporary training shift may be scheduled from 7:00 a.m. to 3:30 p.m. The environment emphasizes precision, cleanliness, and organization, with a strong focus on maintaining equipment and work areas in safe operating condition. Job Type & Location This is a Contract to Hire position based out of Torrance, CA. Pay and Benefits The pay range for this position is $25.00 - $40.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Torrance,CA. Application Deadline This position is anticipated to close on Aug 28, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. \nCompany Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: TIG Welder Job Description This role focuses on precision TIG welding of 316L stainless steel components to produce high-quality finished products that meet strict dimensional and visual standards. You will read and interpret blueprints and weld symbols, fit and tack assemblies, and complete welds using a variety of fabrication tools in a fast-paced production environment. Responsibilities • Perform TIG welding on 316L stainless steel components in accordance with engineering drawings and specifications., • Read and interpret blueprints, drawings, and weld symbols to determine weld requirements, joint preparation, and sequence of operations., • Fit, align, and tack stainless steel parts and assemblies to ensure proper dimensions and alignment prior to final welding., • Complete welds that meet established quality, dimensional, and visual requirements, including inspection of weld beads and joints., • Use grinders, polishers, and other fabrication tools to clean, blend, and finish welded components to specified standards., • Verify measurements and tolerances during and after welding to ensure parts meet specification., • Maintain a clean, organized work area and handle tools and equipment safely and correctly., • Follow all shop procedures, safety guidelines, and quality standards throughout the welding and fabrication process. Essential Skills • Proven TIG welding experience specifically with 316L stainless steel., • Ability to read and interpret blueprints, engineering drawings, and weld symbols accurately., • Strong skills in fitting, tacking, and welding stainless steel components to precise specifications., • Demonstrated ability to produce welds that meet quality, dimensional, and visual inspection requirements., • Proficiency in using grinders, polishers, and common fabrication tools to complete and finish welded products., • At least 5 years of relevant welding and fabrication experience. Additional Skills & Qualifications • Experience working in a production or fabrication shop environment., • Comfort working on multiple shifts and performing overtime when required., • Attention to detail and a strong focus on quality and consistency., • Ability to work independently and as part of a team in a fast-paced setting. Why Work Here? You will join a professional fabrication environment that values craftsmanship, consistency, and safety. The role offers steady, full-time hours with opportunities for overtime, allowing you to grow your skills and experience with advanced stainless steel TIG welding. You will work with modern tools and equipment alongside experienced tradespeople who take pride in producing high-quality work. Work Environment This position is based in a fabrication shop environment working with stainless steel components and standard welding and finishing equipment, including TIG welders, grinders, and polishers. Multiple shifts are available, including a first shift starting at 6:00 a.m. Monday through Friday with Saturday overtime as needed, and a second shift starting at 3:00 p.m. Monday through Friday with Saturday overtime as needed. The work involves standing for extended periods, handling metal materials, and working around welding arcs, noise, and shop machinery while following all safety procedures and wearing appropriate protective equipment. Job Type & Location This is a Contract to Hire position based out of Vernon, CA. Pay and Benefits The pay range for this position is $25.00 - $35.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Vernon,CA. Application Deadline This position is anticipated to close on Aug 28, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. \nCompany Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionTIG WELDER Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As a TIG Welder, you will work closely with our engineering and manufacturing teams to fabricate high-precision stainless-steel tubing and structural assemblies used throughout our next-generation metal 3D printing systems. You will perform high-quality TIG welds on thin-walled pipes, tubes, and custom fixtures that supports our internal factory infrastructure. The ideal candidate is detail-oriented, takes pride in craftsmanship, and thrives in a fast-paced environment where quality and reliability matter. 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative individuals who love solving hard problems and creating amazing technology! Responsibilities: • TIG welding thin-walled stainless steel tubes, pipes, and other various structures using Miller Syncrowave 180 TIG Welder, • Use of fixturing equipment such as magnetic and corner clamps, • Use of fabrication equipment including miter saws, band saws, and grinders, • Welding structures for the worlds highest throughput metal 3D printing system Basic Requirements: • 3+ years of TIG welding experience, • Experience welding stainless steel and aluminum Preferred Skills and Experience: • 5+ years of TIG welding experience, • Experience with precision welding, • Experience welding in an aerospace environment, • Experience welding thin-walled pipes, tubes, or other various structures, • Ability to perform other fabrication duties in the machine shop if interest / time permits Location: • Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country., • Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated pay range for this role is $30-50/hour, with compensation expectations outside of this range taken on a case by case basis., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role Hadrian is building the most advanced manufacturing platform in the world. As we win new programs and stand up new factories, the workforce question gets decided early, usually before a contract is signed and almost always before anyone has validated whether the labor assumptions hold. Getting that wrong means delayed milestones, unmet contractual obligations, and a workforce that cannot ramp to meet production. Getting it right is a prerequisite for every program we take on. We are looking for a Workforce Programs Manager to own the scoping of workforce for new Hadrian programs end to end. This is the person who sits with the sales and federal teams while a deal is still being shaped, reads the statement of work, and translates it into a labor model, a headcount plan, a training strategy, and a clear build-versus-partner decision. It is a new function. You are the first hire in it, and it is tied directly to our program and factory expansion roadmap. You will build the labor models that tell us what a program actually costs in people. You will design the training strategy for capabilities we have never run before, including regulated programs like NAVSEA-compliant welder workmanship and new NDT certification tracks. You will own the framework for what Hadrian builds internally versus what we source through partners, and you will manage the institutional partnerships that follow from that decision. You will be the forward-looking input to the Workforce Development organization, working with the team on what is coming so they can scale ahead of demand instead of reacting to it. The right person has been in the room where program commitments are made and understands what those commitments mean for the workforce before anyone else does. They are equally comfortable in a business development review with a prime contractor, building a headcount model in a spreadsheet, and walking a community college president through what a partnership would require. They default to building capability internally and treat partnerships as a deliberate tool, not a first response. What You'll Do Program Workforce Scoping Embed with the sales and federal teams during program pursuit to scope workforce requirements before commitments are finalized Read and interpret statements of work, contract terms, and program milestones, and translate them into executable workforce plans Identify the labor, training, and certification obligations a program creates, and surface the risks and gaps while there is still time to address them Labor Modeling and Headcount Planning Build labor models and headcount plans for new programs and capability expansions, covering Factory Technician, Weld Technician, and NDT Technician roles as well as the indirect and support headcount programs require Validate that labor assumptions in deal and operational models are internally consistent and flow through to real headcount outputs Own the workforce-cost view of a program and defend it to finance, operations, and program leadership Training Strategy for New Capabilities Design the training and certification strategy for capabilities Hadrian has not run before, including regulated programs such as NAVSEA welder workmanship and new NDT method tracks Map external certification and audit requirements into the training plan so compliance is built in from the start Define cohort timing, trainer ratios, and lead times from hire to certified, working backward from program readiness dates Build-versus-Partner Strategy and Partnerships Own the framework for determining whether a workforce need is best met by building internally or sourcing through an external partner, with a default toward insourcing Manage the portfolio of institutional partnerships that follow from that decision, including community colleges, trade schools, universities, veteran programs, and high school pathways Represent Hadrian in partner negotiations, MOU development, and ongoing relationship management, and hold partners to defined quality and output standards Treat partnerships as foundational pre-employment pipeline tools, not a substitute for building Hadrian's own capability Workforce Org Readiness Work closely with the Director of Workforce Development to ensure the Workforce organization is staffed and structured to scale with the program portfolio Provide the forward-looking inputs the WFD org needs to hire, build curriculum, and stand up training operations ahead of program demand Maintain visibility for internal stakeholders into the workforce pipeline across all active and pursued programs What We're Looking For 7+ years in workforce planning, labor modeling, program management, or business development, with demonstrated experience translating program or contract requirements into operational workforce plans Background in or strong familiarity with manufacturing, defense, or government contracting environments Track record of building headcount or labor models for new programs or capability expansions, where the output was an executable plan rather than a strategy document Experience in customer-facing or federal program work, including interpreting a government SOW and presenting a workforce plan to a customer A business and commercial mindset: you understand what Hadrian is signing up for when a deal closes, and you can quantify it Strong cross-functional communication, with the ability to represent workforce realities to program and factory leadership and translate them back to institutional partners Comfort operating where the playbook is still being written Bachelor's degree in Business, Engineering, Workforce Development, Public Policy, or a related field; advanced degree a plus; equivalent experience considered What Will Set You Apart Defense business development or proposal development experience with a workforce or labor component Familiarity with NAVSEA, SUBSAFE, or similar regulated certification and audit frameworks Experience standing up training programs in regulated manufacturing environments Background in advanced or precision manufacturing Experience with workforce development grants, government funding programs, or public-private partnerships Familiarity with community college systems and dual-enrollment or early college program design A genuine point of view on what manufacturing workforce development should look like for the next generation, grounded in what programs actually require rather than how it has always been done Benefits for Full-time Employees Medical, dental, vision, and life insurance plans for employees 401k Relocation support may be provided for certain situations, based on business need. Flexible vacation policy Equity ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Use of AI in hiring Hadrian uses AI-assisted tools in our recruiting and hiring processes to help our team work more efficiently. This may include tools that help organize and analyze recruiting data, as well as an AI-powered notetaker that can record and transcribe interviews and help coordinate feedback. These tools support our team and are not used to make hiring decisions. All candidate evaluations and hiring decisions are performed by humans. If an interview will be recorded, you will be notified in advance and may opt out at any time with no impact on your candidacy. Candidate data processed through these tools is subject to the same protections described in our Privacy Policy. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions. Compensation Range: $150K - $225K

HII) is seeking an experienced TIG Welder to join our manufacturing team. The TIG Welder will be responsible for setting up and operating welding equipment to produce high-quality welded assemblies in accordance with engineering drawings, specifications, and company quality standards.

We are looking for a dedicated Welder to join our team. As a Welder for IPS, you will identify problems and make necessary adjustments as they relate to industrial AC/DC electric motors and generators.

We are looking for a dedicated Welder to join our team. As a Welder for IPS, you will identify problems and make necessary adjustments as they relate to industrial AC/DC electric motors and generators.

Under general supervision, the Welder uses hand welding and flame cutting equipment such as arc welders, gas welders, and gas torches to weld together metal components (flat, horizontal, or vertical plates and pipes).The Welder is responsible for assisting with the entire sequence of cutting and wel

We are looking for a dedicated Welder to join our team. As a Welder for IPS, you will identify problems and make necessary adjustments as they relate to industrial AC/DC electric motors and generators.

Under general supervision, the Welder uses hand welding and flame cutting equipment such as arc welders, gas welders, and gas torches to weld together metal components (flat, horizontal, or vertical plates and pipes). The Welder is responsible for assisting with the entire sequence of cutting and we

Under general supervision, the Welder uses hand welding and flame cutting equipment such as arc welders, gas welders, and gas torches to weld together metal components (flat, horizontal, or vertical plates and pipes). The Welder aligns and welds components of metal tools, wires, fixtures and other m

Laser welding is a plus! This Jobot Consulting Job is hosted by: Alizen Rodriguez Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume.Salary: $24 - $30 per hour A bit about us: We are a manufacturing company specializing in the design and production of indus