Welder jobs in Memphis, TennesseeCreate job alerts

Job Description Tanker Trailer Mechanic Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for DOT inspector mechanics with 3+ years of tank trailer repair experience! Address: 1224 Channel Ave, Memphis, TN. 38103 Shift Hours: Monday through Friday, 7:00 AM to 4:00 PM Pay Range: $22.00 to $36.00 per hour, dependent on experience. Skill-based pay rate reviews and potential increases every 6 months. Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a tank trailer., • Tank service and repair, Betts valves, gaskets, • Trailer suspension installation and repair, • Experience with air brake systems and repairs, • Ability to use handheld diagnostic tools, tablets, basic tech skills, • MIG & TIG aluminum and stainless steel, • Ability to effectively and efficiently inspect tanks and trailers to align with DOT standards (HM183, hazmat) Physical Demands: • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a 16" tank trailer manhole, • Must be able to work in confined spaces DCI Benefits: • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job Description Trailer Mechanic Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for DOT registered inspector mechanics with 3+ years of tank trailer repair experience! Address: 615 Petro Cove, West Memphis, AR Shift Hours: Monday through Friday, 7:00 AM to 5:00 PM Pay Range: $22.00 to $36.00 per hour, dependent on experience. Skill-based pay rate reviews and potential increases every 6 months. Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a tank trailer., • Tank service and repair, Betts valves, gaskets, • Trailer suspension installation and repair, • Experience with air brake systems and repairs, • Ability to use handheld diagnostic tools, tablets, basic tech skills, • TIG aluminum, stainless or carbon welding experience, • Ability to effectively and efficiently inspect tanks and trailers to align with DOT standards (HM183, hazmat) Physical Demands: • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a tank trailer manhole, • Must be able to work in confined spaces DCI Benefits: • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job Description Trailer Mechanic Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for DOT registered inspector mechanics with 3+ years of tank trailer repair experience! Address: 615 Petro Cove, West Memphis, AR Shift Hours: Monday through Friday, 7:00 AM to 5:00 PM Pay Range: $22.00 to $36.00 per hour, dependent on experience. Skill-based pay rate reviews and potential increases every 6 months. Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a tank trailer., • Tank service and repair, Betts valves, gaskets, • Trailer suspension installation and repair, • Experience with air brake systems and repairs, • Ability to use handheld diagnostic tools, tablets, basic tech skills, • TIG aluminum, stainless or carbon welding experience, • Ability to effectively and efficiently inspect tanks and trailers to align with DOT standards (HM183, hazmat) Physical Demands: • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a tank trailer manhole, • Must be able to work in confined spaces DCI Benefits: • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job Description Summary of Duties: Welding and fitting duties to support tank fabrication operations. Performs basic maintenance, and inspection of equipment. Requests supplies as needed. Keeps work area in clean and neat condition. Practices safe work habits, participates in required safety training and programs. Has good communication skills and ability to work with others. Specific Duties and Responsibilities: 1. Able to weld with stick (welding electrode) in all positions. The two electrodes that we use are 6011, all position rod mainly used for tacking and fitting, and 7024, one position rod used to weld tank seams., 2. Able to MIG weld (SMAW and GMAW) using .045 and .051 metal core and inner shield wire with various gas shield., 3. Able to use plasma and oxy-propane cutting torches., 4. Able to read blueprints, tape measure, protractor degrees., 5. Able to follow instructions and be self-motivated enough to work with little supervision., 6. Tools required: welding hood, jacket, gloves, 5lb sledge hammer, chip hammer, tri-square, bubble level, 50 ft. & 12 ft. tape measure, steel toe shoes. EDUCATION: Requires high school diploma or GED equivalency; simple reading and arithmetic such as addition and subtraction of whole numbers and reading decimals; work with simple charts, drawings, and measuring equipment. WORK EXPERIENCE: At least three years of successful continuous employment, welding in a commercial or industrial setting. PHYSICAL REQUIREMENTS: Moderate physical effort; requires standing on for entire shift; may lift up to 60 lbs. throughout the day; good eye and hand co-ordination; good visual acuity in order to perform most task; must be able to climb, stoop, and bend to get up and down from forklift truck and perform various outside activities throughout yard. Why Newberry? Newberry is driven by our companies' core values and we strive to facilitate a greater sense of purpose in our career opportunities. We are proud to offer our employees a generous compensation/benefits package that includes: • Excellent base salary, • Career growth with one of the fastest growing U.S. Steel Tank Manufactures, • Comprehensive benefits package to include Medical, Dental, and Vision insurance, • Company paid short term disability and life insurance, • Flexible spending accounts (Section 125 Accounts), • Retirement plan with company match, • Top-Notch Culture and Support Staff, • Rewarding work with a well-respected, financially stable company

Job DescriptionWelder / FabricatorGeneral Description The Welder/Fabricator is responsible for laying out, fabricating, assembling, and welding metal components and equipment using technical drawings, specifications, and other provided information. This position works primarily with steel and aluminum and utilizes MIG and TIG welding processes to produce quality fabricated components and assemblies. Duties and Responsibilities • Cut, fit, weld, and assemble metal components used in the fabrication of production equipment utilizing MIG and TIG welding processes., • Fabricate components and assemblies using steel, aluminum, and other specified materials., • Read and interpret technical drawings, specifications, measurements, and manufacturer information to accurately fabricate equipment and parts., • Design and fabricate components or equipment needed to meet special or non-standard production requirements., • Install and remove equipment and components using appropriate power tools, hand tools, and related equipment., • Design and fabricate holding fixtures and jigs to support efficient and repeatable production of fabricated parts., • Inspect completed work to ensure components meet required specifications and quality standards., • Maintain accurate records of completed work as required., • Monitor inventory of welding and fabrication supplies and communicate or coordinate replenishment needs as necessary., • Maintain a clean, organized, and safe work area., • Follow all company safety policies, procedures, and applicable workplace safety requirements., • Perform other duties as assigned.Qualifications and Skills, • Working knowledge of MIG and TIG welding processes., • Knowledge of the properties and characteristics of metals commonly used in welding, cutting, and fabrication, including steel and aluminum., • Knowledge of welding materials, consumables, and appropriate welding techniques for various applications., • Ability to read and interpret technical drawings, measurements, specifications, and fabrication instructions., • Ability to accurately use measuring devices and perform basic calculations related to fabrication., • Ability to select and safely operate appropriate hand tools, power tools, welding equipment, and fabrication equipment., • Knowledge of occupational hazards and appropriate safety precautions, procedures, and practices associated with welding and metal fabrication., • Ability to fabricate components accurately and consistently according to established specifications., • Strong attention to detail and commitment to producing quality work.Physical Demands This position requires participation in production and fabrication activities and may include: • Frequent walking and standing., • Bending, reaching, and other physical movements associated with fabrication and production work., • Frequent lifting and handling of materials weighing approximately 10–50 pounds., • Regular use of hand tools, power tools, welding equipment, and fabrication equipment. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position. Additional Information This job description is intended to describe the general nature and level of work performed in this position. It is not intended to be an exhaustive list of all duties, responsibilities, or qualifications required. Employees may be assigned additional duties based on business and operational needs. Work hours may vary based on available work, production requirements, and approved staffing standards. Employment with Jordan Aluminum is at will. Either the employee or Jordan Aluminum may terminate the employment relationship at any time, with or without cause or notice, subject to applicable law.

Job Description Maintenance Certified Welder Buckman – Memphis, TN Location: Memphis, TN Language: English Travel: up to 5% Buckman is a privately held, global specialty chemical company with headquarters in Memphis, TN, USA, committed to safeguarding the environment, maintaining safety in the workplace, and promoting sustainable development. Buckman delivers exceptional service and innovative solutions to our customers globally in the pulp and paper, leather, and water treatment sectors to help boost productivity, reduce risk, improve product quality, and provide a measurable return on investment. Position Summary Performs certified welding and fabrication tasks to maintain, repair, and modify production and utility equipment in a batch specialty chemical plant. Ensures work is executed safely, efficiently, and in compliance with regulatory and quality standards. Key Outcomes/Responsibilities Outcome: Safe & Compliant Welding Execution Zero safety incidents; 100% compliance with permit-to-work and regulatory requirements. Actions: o Performs welding activities in accordance with ASME, AWS, and site-specific standards. Follows all safety protocols including hot work permits, PPE, and confined space entry. Outcome: High-Quality Fabrication & Repairs 95% first-pass quality rate; <5% rework due to weld defects Actions: o Fabricates and repairs piping, vessels, structural supports, and equipment components using appropriate welding techniques (e.g., TIG, MIG, Stick). o Conducts visual and dimensional inspections to ensure weld integrity. Outcome: Support for Preventive & Corrective Maintenance On-time completion of scheduled work; reduced downtime due to weld-related failures. Actions: o Executes welding tasks as part of planned maintenance and emergency repairs. Collaborates with planners and technicians to ensure readiness and alignment with production schedules. Outcome: Documentation & Traceability 100% documentation accuracy; audit-ready compliance. Actions: o Completes weld logs, inspection records, and job documentation as required by site protocols and regulatory standards. Maintains certification records and ensures qualifications are current. Outcome: Continuous Improvement & Reliability Support Contribution to ≥1 improvement initiative per quarter; reduction in recurring weld-related failures. Actions: o Identifies opportunities to improve weld techniques, material selection, and fabrication methods. Participates in root cause analysis and reliability improvement initiatives. Basic Qualifications · Education Requirements: High School Diploma or equivalent · Job Experience:4 - 6 years · Technical Skills: Proficiency in TIG, MIG, Stick welding; pipe fitting; blueprint reading; weld inspection • Safety Knowledge: Familiarity with hot work permitting, confined space entry, and hazardous materials handling, • Systems: Basic CMMS usage for work order documentation (e.g., SAP PM) Competencies · Collaborates - Building partnerships and working collaboratively with others to meet shared objectives · Communicates Effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences · Manages Complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems · Plans and Aligns - Planning and prioritizing work to meet commitments aligned with organizational goals · Action Oriented - Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm We appreciate the interest of recruitment partners, but we are not engaging external agencies for this role. #LI-TF1 #LI-Onsite Company DescriptionBuckman is a privately held, global specialty chemical company with headquarters in Memphis, TN, USA, committed to safeguarding the environment, maintaining safety in the workplace, and promoting sustainable development. Buckman delivers exceptional service and innovative solutions to our customers globally in the pulp and paper, leather, and water treatment sectors to help boost productivity, reduce risk, improve product quality, and provide a measurable return on investment.Buckman is a privately held, global specialty chemical company with headquarters in Memphis, TN, USA, committed to safeguarding the environment, maintaining safety in the workplace, and promoting sustainable development. Buckman delivers exceptional service and innovative solutions to our customers globally in the pulp and paper, leather, and water treatment sectors to help boost productivity, reduce risk, improve product quality, and provide a measurable return on investment.

Job Descriptionow Hiring: Certified Welder/Fabricator Location: Pompano Beach, FL Schedule: Monday – Friday | 7:00 AM – 3:30 PM Pay: $28.00 per hour We are seeking an experienced Certified Welder/Fabricator to join our team. This position focuses on repairing stainless steel vacuum-insulated cryogenic cylinders and performing structural steel fabrication projects in a production environment. Responsibilities • Perform weld repairs on stainless steel cryogenic tanks., • Weld primarily Types 304 and 201 stainless steel (average thickness of 3/16")., • Fabricate structural carbon steel components., • Read and interpret blueprints and fabrication sketches., • Work closely with the production team to meet daily output goals., • Follow all industrial safety standards and procedures., • Assist with other refurbishment and production activities as needed.Qualifications, • Minimum 5 years of direct welding and fabrication experience., • Strong experience with:, • TIG Welding, • MIG Welding, • ARC Welding, • Brazing, • Soldering, • Cutting and fabrication, • Experience operating disc grinders, bench grinders, cut-off saws, drill presses, and common hand tools., • Ability to read blueprints and technical drawings., • High attention to detail with a strong work ethic and ownership mentality.Required Certifications, • AWS Certifications required:, • TIG 4F, • MIG 4F, • ARC 6G, • Knowledge of ASME Unfired Pressure Vessel Code is highly preferred., • Existing GTAW Stainless 8P8-PC-69 Rev. 8 Certification in accordance with ASME Boiler and Pressure Vessel Code Section IX is a significant plus. #Pro123

Job Description D7 Pneumatics LLC is seeking an experienced QA/QC Manager to support our fabrication shop and field operations based in Jonesboro, Arkansas. This position will begin on a part-time or as-needed basis, with the potential to develop into a full-time role based on workload and company growth. The QA/QC Manager will be responsible for implementing and maintaining D7’s Quality Control Program, supporting ASME and National Board Code work, and ensuring fabrication and field activities comply with approved procedures, project specifications and applicable codes. Key Responsibilities Administer and enforce the D7 Quality Control Manual and related procedures. Oversee quality activities for shop fabrication and field installations. Review contracts, drawings, specifications and project requirements before work begins. Confirm the applicable codes, standards, inspection requirements and testing procedures for each project. Maintain compliance with applicable ASME, National Board and pressure-piping requirements. Coordinate with Authorized Inspectors, client representatives, engineers and third-party inspection agencies. Verify that approved Welding Procedure Specifications are available and properly followed. Review and maintain WPS, PQR and Welder Performance Qualification records. Monitor welder qualifications and continuity. Verify material receiving, identification, storage and traceability. Review Material Test Reports and certificates of compliance. Maintain weld maps, weld logs, inspection reports and project turnover documentation. Establish and monitor inspection hold points. Perform or coordinate fit-up, visual welding and final inspections. Coordinate nondestructive examination, including RT, UT, MT and PT, when required. Ensure pressure testing is performed using approved procedures, calibrated equipment and proper safety controls. Monitor preheat, interpass temperature and postweld heat treatment when applicable. Manage nonconformance reports, corrective actions and weld-repair documentation. Maintain calibration records for inspection and testing equipment. Control Code stamps, data reports and quality records as assigned. Assist with ASME, National Board, Authorized Inspection Agency and client audits. Conduct internal quality audits and recommend improvements. Prepare complete and organized project turnover packages. Train supervisors, welders, fitters and shop personnel on applicable quality requirements. Maintain a professional, practical and safety-focused quality culture. Required Qualifications Previous QA/QC experience in industrial fabrication, pressure piping, power-generation, boiler or pressure-vessel work. Working knowledge of welding inspection and fabrication quality-control methods. Ability to read fabrication drawings, piping isometrics, P&IDs, weld maps and technical specifications. Knowledge of welding procedures, welder qualifications and material traceability. Experience administering inspection, examination and pressure-testing requirements. Strong documentation, organization and communication skills. Ability to work independently and coordinate effectively with project managers, supervisors, inspectors and clients. Proficiency with Microsoft Word, Excel, email and electronic recordkeeping. Willingness to support both Jonesboro shop operations and field projects as required. Preferred Qualifications Knowledge of ASME BPVC Sections I, II, V, VIII and IX. Knowledge of ASME B31.1 Power Piping and ASME B31.3 Process Piping. Experience with National Board Inspection Code repair and alteration requirements. Experience working under ASME U and S Certificates and a National Board R Certificate. AWS Certified Welding Inspector certification. ASNT or employer-based NDE qualifications. Experience dealing with Authorized Inspectors and jurisdictional authorities. Experience in power plants, pulp and paper facilities, steel mills, sawmills or other heavy-industrial facilities. Employment Structure This position is intended to begin as part-time or as-needed employment. Hours may increase based on active projects, shop workload and field requirements. The position has the potential to transition into a full-time QA/QC management role as D7’s Code fabrication and pressure-piping operations expand s.

Job Description Industrial Pipefitter / Welder (Stainless & Carbon) – Sanitary Process Piping Company: Mid-South Facility Services (MSFS) Location: Memphis, TN / North Mississippi / Eastern Arkansas Employment Type: Full-Time | Overtime Available | Travel Opportunities Position Overview Mid-South Facility Services (MSFS) is seeking experienced Industrial Pipefitters/Fabricators who take pride in quality craftsmanship. We perform work inside food & beverage, steel, manufacturing, chemical, pharmaceutical, and heavy industrial facilities throughout the Mid-South. This is not an entry-level position. We are looking for professionals capable of reading prints, fitting complex piping systems, fabricating in the field, and producing clean, high-quality welds. Required Experience Applicants should have experience in several of the following: • Industrial pipefitting, • Stainless steel process piping, • Carbon steel piping, • Sanitary tubing installation, • Schedule 10, 40, and 80 pipe, • Socket weld, threaded, flanged, and grooved systems, • Food-grade sanitary installations, • Hygienic process piping, • Pump, valve, heat exchanger, and tank installation, • Structural steel fabrication, • Equipment setting and alignment, • Conveyor installation, • Mechanical equipment installation, • Blueprint and isometric drawing interpretation, • Field measuring and fabrication, • Pipe supports and hanger systems, • Layout and takeoffs Welding & Cutting Experience Must have experience with several of the following: • GTAW (TIG), • GMAW (MIG), • SMAW (Stick), • Flux Core (FCAW), • Stainless steel welding, • Carbon steel welding, • Aluminum (preferred), • Orbital welding (preferred), • Plasma cutting, • Oxy-fuel cutting, • Torch fitting, • Carbon arc gouging (preferred), • Grinding and finishing of sanitary welds Preferred Industry Experience Experience in one or more of the following industries: • Food & Beverage, • Pharmaceutical, • Chemical Processing, • Steel Mills, • Paper Mills, • Power Generation, • Automotive Manufacturing, • Packaging Facilities, • Industrial Manufacturing, • Grain & Agricultural Processing Ideal Candidate • 5+ years of industrial experience preferred, • Can work independently with minimal supervision, • Strong mechanical aptitude, • Excellent troubleshooting skills, • Able to read blueprints and P&IDs, • Familiar with sanitary standards and quality workmanship, • Reliable transportation, • Willing to work overtime, weekends, and emergency shutdowns, • OSHA 10/30, forklift, aerial lift, confined space, or rigging certifications are a plus Physical Requirements • Lift up to 75 lbs., • Climb ladders and work at heights, • Work in confined spaces, • Stand, kneel, bend, and work in industrial environments, • Ability to pass drug screening and background check when required by customers What We Offer • Competitive pay based on experience, • Overtime opportunities, • Year-round industrial work, • Shutdown and project work, • Long-term maintenance opportunities, • Advancement into Lead, Foreman, and Project Management positions, • Work alongside one of the fastest-growing industrial maintenance companies in the Mid-South If you’re the type of craftsman who takes pride in building sanitary stainless systems, fitting complex piping, and producing quality welds the first time, we want to hear from you. Apply today and join the MSFS team. \nCompany Description About MSFS Mid-South Facility Services (MSFS) is a fast-growing industrial maintenance and labor solutions company specializing in supporting manufacturing plants and large-scale facilities. We help our partners reduce downtime, improve efficiency, and control labor costs with high-level skilled technicians and turnkey maintenance solutions. About MSFS\r\n\r\nMid-South Facility Services (MSFS) is a fast-growing industrial maintenance and labor solutions company specializing in supporting manufacturing plants and large-scale facilities. We help our partners reduce downtime, improve efficiency, and control labor costs with high-level skilled technicians and turnkey maintenance solutions.

Electrical, Millwright, Plumber/Pipefitter, HVAC, Welder, Sheet Metal).

The welder will be welding of rebar of all sizes.

The welder will be welding of rebar of all sizes.

The Welder/Fabricator is responsible for laying out, fabricating, assembling, and welding metal components and equipment using technical drawings, specifications, and other provided information.

The essential functions of the position include, but are not limited to the following:.Weld parts or assemblies; position, align, and fasten assemblies to product, subassemblies, or frames per prints, product specifications or as directed.Set up and verify fixtures and templates, and/or lay out prod

Job Description D7 Pneumatics LLC is seeking a motivated and dependable Industrial Maintenance Technician to join our growing team. This position involves working at a variety of industrial facilities, including sawmills, steel mills, concrete plants, manufacturing facilities, and other industrial operations. The successful candidate will be responsible for installing, maintaining, troubleshooting, and repairing industrial equipment while providing safe, high-quality workmanship. This is a hands-on field position requiring mechanical aptitude, problem-solving skills, and the ability to work independently and as part of a team. Responsibilities • Perform maintenance, repairs, and troubleshooting on industrial equipment and systems., • Install, service, and repair pneumatic, hydraulic, and mechanical equipment., • Diagnose equipment failures and determine corrective actions., • Conduct preventative maintenance inspections and repairs., • Read and interpret blueprints, schematics, and technical drawings., • Work safely in active industrial environments including sawmills, steel mills, concrete plants, and manufacturing facilities., • Complete required documentation and maintenance reports., • Communicate effectively with customers, supervisors, and coworkers., • Travel to various job sites as required.Qualifications, • Experience in industrial maintenance, millwright work, mechanical maintenance, or a related trade preferred., • Strong mechanical aptitude and troubleshooting abilities., • Ability to work safely in industrial environments., • Experience with pneumatic, hydraulic, and rotating equipment is an asset., • Ability to work independently with minimal supervision., • Strong work ethic and positive attitude., • Valid driver's license and reliable transportation., • Ability to lift up to 50 lbs and perform physically demanding work.Required Tools Candidates are expected to provide and maintain their own personal hand tools, including but not limited to: • Impact gun(s), • Socket sets, • Combination wrench sets, • Adjustable wrenches, • Pliers and specialty hand tools, • Tape measure, • Allen/Hex key sets, • Basic diagnostic and troubleshooting toolsTravel Requirements, • Travel may be required depending on project and customer needs., • Occasional overnight stays may be necessary., • Per diem and travel accommodations will be provided when applicable.Preferred Certifications (Not Required), • OSHA 10 or OSHA 30, • MSHA Certification, • Forklift Certification, • Aerial Lift Certification, • First Aid/CPR, • Millwright, Pipefitter, Welder, or related trade experienceWhat We Offer, • Competitive pay based on experience, • Overtime opportunities, • Career advancement opportunities, • Exposure to a wide variety of industrial facilities and equipment, • Supportive team environment, • Training and development opportunities

Aerotek - - Responsibilities: Perform MIG welding per work orders and blueprints; Read blueprints and verify dimensions with tape measure; Set up and operate welding equipment safely; Inspect welds for quality and compliance; Maintain clean, organized, safe work area.

Responsibilities: Operates seated and standing forklift to transfer product from warehouse floor to load trucks; Unloads and stocks incoming merchandise, picking of outgoing merchandise, and loading of outbound trailers when needed; Checks, verifies, and audits merchandise and enters data into remot

FedEx - - Responsibilities: Operate equipment safely to move packages; Assist in pallet buildup/breakdown for heavyweight freight; Liaise with ULD repair vendor as required; Perform other duties as assigned; Complete basic/re-currency training.

Coca Cola - - Responsibilities: Retrieves and places quantities of Cases of Product onto a pre-determined pallet as instructed by the assigned Pick Ticket, in a manner that is safe and builds a stable pallet of product, while meeting or exceeding Warehouse and Company expectations in safety, accura

Aerotek - - Responsibilities: Perform 5DX verification testing on circuit boards; Diagnose and repair boards to component level; Use multimeters and diagnostic tools; Follow BOMs and assembly documentation; Assist test engineering with data and yields.

Jabil - - Responsibilities: Support manufacturing through accurate and timely kitting of materials; Maintain kitting area well organized and 5S; Use RF scanner for kitting of materials based on the job order from Stockroom to a build location; Complete all the requested kits accordingly to the requ

Tradesmen International - - Responsibilities: Thread pipe and fit pipe 2 inches to 14 inches schedule 10; Structural weld on stainless steel - 6g pipe; Lay out, assemble, install and maintain pipe systems for hydraulic and pneumatic equipment for steam hot water heating cooling; Lubricate sprinklin

Boise Cascade - 4043 Delp Street - Responsibilities: Receive, select, and load materials; Operate forklift safely and efficiently; Verify accuracy of orders after packaging and loading; Provide basic customer service to internal and external customers; Conducts physical inventory counts and reconcil

DHL - 5155 Lamar Avenue - Responsibilities: Load, unload, move, stock, and stage products and materials using various types of forklifts or other power equipment; Pull and prepare product for shipment ensuring the exact number and types of product is loaded; Keep appropriate records and reports for

FedEx - - Responsibilities: Operate equipment safely and efficiently to move packages/documents/heavyweight items; Assist in building up and breaking down pallets containing heavyweight freight; Serve as liaison between the company and ULD repair vendor as required; Perform additional duties as ass

Siemens - 101 Airport Industrial Drive - Responsibilities: Assembles and/or modifies electrical control products orders based on customer specifications, electrical diagrams, schematics, and control options.Performs the physical tasks involved in the assembly, modification, testing, packaging and di

Jabil - - Responsibilities: Operate various types of forklifts (e.Perform daily pre-operation inspections of forklifts and other equipment, documenting any defects or maintenance needs; Ensure accurate documentation of material movements, including inventory transfers, cycle counts, and receiving/s

Coca Cola - - Responsibilities: Retrieve and place quantities of cases onto pallets safely; Unload inbound product and transport to storage areas within the warehouse; Load outbound product onto trailers at loading docks; Replenish product to pick/vertique mezzanine areas; Maintain cleanliness and

KENCO - - Responsibilities: Safely operate powered industrial equipment to move products and materials; Load, unload, and store products; Stack and transport materials to designated areas; Use equipment to scan product and print labels; Complete paperwork and operate inventory management systems as

Coca Cola - - Responsibilities: Move, load, and unload assets with forklift/pallet jack; Secure outbound loads and document (STO); Update SAP/CONA via handhelds; Perform safety and housekeeping duties; Operate switcher for trailers.

FedEx - - Responsibilities: Loading and unloading pallets from trucks and conveyors; Operating forklifts and pallet jack; Sorting and building products to pallets; Performing daily equipment inspections; Maintaining accurate storage locations and cycle counts.

Staff Management SMX - 3461 East Raines Road - Responsibilities: Process orders for shipment, including picking, packing, checking, and restocking; Handle computer data inquiries and special processing of customer orders; Perform various general warehouse duties; Support order accuracy and inventory

Pacer Group - - Responsibilities: Safely operate shunt truck to move trailers and containers within the yard; Couple and uncouple trailers and Isotainers; Perform pre and post trip inspections of shunt truck and trailers; Prepare chemical samples for shipment; Fill drums and totes for shipment.

Fleet Mobile Maintenance Technician.Come join Fleet Mobile Maintenance, where we have cutting-edge technology that reduces your admin time - so you can focus less on paperwork and more on doing what you love.We are a locally run, family-oriented, proudly serving your community, and are looking for t

Coca Cola - - Responsibilities: Perform preventive and corrective maintenance on facility systems; Repair plumbing/electrical/HVAC systems; Conduct carpentry and masonry repairs; Maintain lighting and fixtures; Assist with loading docks, painting, roofing.

CORT Furniture Rental is hiring immediately for full-time non-CDL drivers in Memphis, TN!.The Delivery Driver works collaboratively as part of the Operations team.You will be responsible for loading furniture and delivering safely to customers' homes or office spaces.You will also be assembling furn

Mauser Packaging Solutions - - Responsibilities: Operate forklift to move materials between storage and work areas following instructions and safety guidelines; Ensure proper loading/unloading, palletizing, and housekeeping in the warehouse; Maintain accurate shipping/receiving documentation as req

At EVERSANA, we are proud to be a Great Place to Work across the globe.We're fueled by our vision to create a healthier world.How? Our global team of more than 6,000 employees is committed to creating and delivering next-generation commercialization services to the life sciences industry.We are grou

Are you looking to join a dynamic team that provides its people with the tools to be successful and opportunities to grow? Universal Logistics is a leading provider of customized transportation and logistics solutions, offering a comprehensive suite of services including transportation, value-added,

Memphis, TN, US, 37501 Locations: Memphis Pay Range: 18.Hourly, depending on experience Schedule: Uncap Your Potential at America's Largest Coca-Cola Bottler Pour Your Passion into Purpose! We're more than beverageswe're building meaningful careers and vibrant communities.Join our team where your t

Location: Olive Branch, MS, US, 38654 Job ID: 61736.The Baler ITO is responsible for maintaining and driving forklifts, moving product, equipment, or materials in the warehouse and in and out of trucks.Drives industrial truck with a lifting device to push, pull, lift, stack, tier or move products, e

OmniSource - 540 Weakley Avenue - Responsibilities: Perform truck and trailer repair; Perform emergency on the road repair; Diagnose and repair of crane/loader/forklift/skid steer; Perform repair and maintenance of containers; Maintain preventative maintenance schedules, garage and maintenance area.

US Postal Service - - Responsibilities: Perform preventive maintenance and repair of facility mechanical systems in Memphis.

GreyStar - - Responsibilities: Completes assigned work orders and preventative maintenance on the property; Prepares vacant apartment homes for leasing and move-ins by completing pre-move-out inspections and punch lists; Tracks inventory and notifies maintenance supervisor about re-ordering needs;

Material Handler Operations Lead.At EVERSANA, we are proud to be a Great Place to Work across the globe.We're fueled by our vision to create a healthier world.How? Our global team of more than 6,000 employees is committed to creating and delivering next-generation commercialization services to the l

Altium Packaging - 4440 South Mendenhall Road - Responsibilities: Operate blow-mold and PET/injection molding machines to produce bottles; Troubleshoot process issues and perform minor maintenance to keep production lines running; Follow GMP, safety policies, and wear appropriate PPE; Inspect bottle

We are looking for an experienced, motivated, and positive individual to join our team.You must have recent equipment operator experience and be skilled on the reach truck and cherry picker.The Equipment Operator is responsible for unloading trucks with incoming materials and moving materials to sto