Offres repair à Providence, Rhode IslandCréer des alertes d'emploi

A Brief Overview: A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do: • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $25.50/hour, increasing to $30.25/hour after training and certification., • Earn $5/set of wiper blades when added for customer safety., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful., • View all our health, wealth, and life offerings at www.safelitebenefits.com. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). #LI-AK1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers http://safelite.com/Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Job DescriptionJOB SUMMARY: We are looking for a road mechanic to join our family owned forklift business! The right candidate will have mechanical experience on cars, trucks or forklifts. Forklift knowledge a definite plus! After a training period, applicant would be provided with a service van to go to our customer locations in order fix their forklifts, pallet jacks, etc. Experience with technology is a plus, as all hours and job related tasks will be logged through a tablet. Excellent pay and benefits!Responsibilities • Mobile field repairs, • Efficient equipment maintenance according to industry and company standards, • Complete any required documentation, including work-orders, • Keep job site/work area neat, clean, and organized, • Observe and comply with all company policies and safety standards, • Complete any other assigned tasks ton contribute to effective operation of the service & repair department, • Ensure work is being conducted safely for the employees, the customers, the public and our environmentQualifications, • At least one year of mechanical experience, • Teammate with a strong sense of dedication to the customer and service team, • Self-motivated and professional, • Possess own tools (employer willing to help out with some new tool expenses through tool allowance), • Possess a valid drivers license Benefits: • Competitive Health Insurance, • 401K With Employer matching opportunity, • Paid Vacation, Holidays and Sick time, • Company Gas Card, Cell Phone and Tablet We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionDIESEL VEHICLE MECHANIC Overview: As a Wheeled Vehicle Mechanic, you’ll supervise and perform maintenance, repair, and recovery operations on wheeled vehicles and select armored vehicles that serve the Army in a variety of mission-critical roles. You’ll inspect, service, maintain, repair, replace, adjust, and test wheeled vehicles, material handling equipment systems, subsystems and components, and automotive electrical systems, including wiring harnesses and starting and charging systems. Job Duties: • Maintain wheeled vehicles, their associated trailers and material handling equipment systems., • Inspect, service, maintain, repair, replace, adjust, and test wheeled vehicles and material handling equipment systems, subsystems, and components., • Service automotive electrical systems, including wiring harness, starting, and charging systems., • Perform wheeled vehicle recovery operations.Requirements:, • Be between the ages of 17– 40., • Be a U.S. Citizen or Permanent Resident., • Possess a High School Diploma or GED., • Submit to background and medical screening, • Receive a passing score on the ASVABTraining:Job training for a Wheeled Vehicle Mechanic requires 10 weeks of Basic Combat Training and 14 weeks of Advanced Individual Training at Fort Gregg-Adams, VA with on-the-job instruction. Part of this time is spent in the classroom, and part takes place in the field.Some of the skills you’ll learn are: Helpful Skills:, • Interest in auto mechanics and the industrial arts., • Preference for physical work., • Troubleshooting and repairing mechanical problems., • Interest in automotive engines and how they work. FUTURE CIVILIAN CAREERS:The skills you learn will help prepare you for a career with service stations, auto dealers, farm equipment companies and state highway agencies. You'll be able to pursue a career as a garage mechanic, carburetor mechanic, transmission mechanic, radiator mechanic, construction equipment mechanic or endless track vehicle mechanic. Key Healthcare Benefits: TRICARE Health Plan: As a member of the U.S. Army, you and your family can be covered under the TRICARE Health Plan – a top-tier healthcare program that provides medical, dental, vision, and prescription coverage. No-Cost Healthcare: Active-duty members receive medical and dental care at no cost. Your family can also receive healthcare services at military or civilian facilities through TRICARE at little or no cost. Comprehensive Dental Care: Receive annual dental check-ups, cleanings, and necessary treatments. Vision Coverage: Coverage includes routine eye examinations and potential discounts on eyewear or corrective surgery. Health & Wellness Programs: Engage in preventive health programs, counseling services, fitness resources, and more to ensure you remain in the best of health. Maternity and Paternity Benefits: Expectant mothers receive comprehensive prenatal, labor, and postnatal care. New parents are also entitled to maternity and paternity leave. Long-term Care: Access to resources and programs that assist with long-term health needs or disabilities. Mental Health Services: Prioritizing the mental well-being of our service members, the U.S. Army offers counseling, therapy, and other mental health resources. Specialized Medical Training: Depending on your role, you may receive specialized medical training, ensuring that you're equipped with the skills to treat and manage a variety of health situations. Why the U.S. Army: Professional Growth: Engage in continued learning, training, and career advancement opportunities. Diverse Opportunities: From combat medic specialists to medical officers, choose a role that fits your passion and expertise. Community: Join a tight-knit community that prioritizes camaraderie, service, and mutual support.

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241595

Job Description RI Licensed Plumber – Multi-Family & New Construction Seekonk, MA | Serving Rhode Island & Southern Massachusetts Pay: $30 – $50 per hour (based on experience and license) B&L Ductless is a growing, family-oriented company specializing in high-quality plumbing, electrical, and HVAC installations across Rhode Island and surrounding areas. We’re a small team that treats people like family — you won’t just be a number here. We’re building an elite crew focused on multi-family new construction and high-end residential projects. We’re looking for a Rhode Island licensed Journeyman or Master Plumber who takes pride in clean, code-compliant work and wants steady, high-quality projects. What You’ll Be Doing • Rough-in and finish plumbing for multi-family apartments and high-end residential homes, • Install, repair, and maintain pipes, fixtures, valves, fittings, water heaters, and related systems, • Read and interpret blueprints and ensure compliance with Rhode Island plumbing codes, • Collaborate with our HVAC team on integrated ductless systems when needed, • Maintain a clean, safe job site and deliver professional workmanship What We’re Looking For • Valid Rhode Island Journeyman or Master Plumber license (required), • Proven experience in new construction plumbing (multi-family and high-end residential preferred), • Reliable transportation and clean driving record, • Strong work ethic, attention to detail, and ability to work independently or as part of a team, • Positive attitude and commitment to quality craftsmanship What We Offer • Competitive pay: $30–$50 per hour based on experience and skills, • Paid vacation and holiday pay, • Performance bonuses, • 401(k) retirement plan with company match, • Steady work on multi-family and high-end residential projects, • Opportunity to grow with a small, tight-knit company, • Supportive team environment where good work is noticed If you’re a skilled, reliable plumber looking for quality projects and a company that values craftsmanship, apply today. B&L Ductless is an equal opportunity employer. \nCompany Description B&L Ductless is a growing, family-oriented company specializing in high-quality HVAC, electrical, and plumbing installations across Rhode Island and surrounding Massachusetts. We focus on multi-family new construction and high-end residential projects, with a strong emphasis on ductless mini-splits and heat pumps. We’re a small team that treats people like family — you won’t just be a number here. We’re building an elite crew that takes pride in clean, code-compliant work and steady, high-quality projects. B&L Ductless is a growing, family-oriented company specializing in high-quality HVAC, electrical, and plumbing installations across Rhode Island and surrounding Massachusetts. We focus on multi-family new construction and high-end residential projects, with a strong emphasis on ductless mini-splits and heat pumps.\nWe’re a small team that treats people like family — you won’t just be a number here. We’re building an elite crew that takes pride in clean, code-compliant work and steady, high-quality projects.

Job DescriptionBenefits: • 401(k), • Employee discounts, • Health insurance, • Paid time off, • Competitive salary, • Dental insurance Walser Mobile Refrigeration LLC Position: Refrigeration / Diesel Service Technician (Shop & Mobile) Position Overview Walser Mobile Refrigeration LLC is seeking a skilled and motivated Service Technician to join our growing team. This role involves diagnosing, repairing, and maintaining transport refrigeration units (TRU), diesel vehicles, trailers, and heavy-duty equipment. Work will be performed both in-shop and in the field through mobile road service. Key Responsibilities • Diagnose, troubleshoot, and repair transport refrigeration units (Carrier, Thermo King, etc.), • Perform preventative maintenance on TRUs, diesel trucks, trailers, and related equipment, • Inspect equipment and identify mechanical, electrical, and refrigeration system issues, • Repair or replace defective components including engines, compressors, electrical systems, and controls, • Perform A/C system diagnostics and repairs (truck & van A/C experience preferred), • Complete service calls in both shop and mobile environments, • Maintain accurate service records, work orders, and parts usage, • Manage and maintain inventory of tools, parts, and supplies in service vehicle, • Communicate effectively with customers regarding repairs, timelines, and recommendations, • Follow all safety procedures and DOT compliance requirements Qualifications, • Experience with diesel engine repair and diagnostics, • Automotive and/or heavy-duty equipment diagnostic experience, • Ability to troubleshoot electrical systems (12V/24V), • ASE Certification and/or Diesel Mechanic Certification (preferred, not required), • Valid Driver’s License (clean driving record preferred), • DOT Medical Card (or ability to obtain), • Ability to lift 50+ lbs and work in varying weather conditions, • Strong problem-solving skills and ability to work independently, • Good communication and customer service skills Preferred Experience (Bonus Skills), • Experience with Carrier Transicold and/or Thermo King units, • EPA 608 Certification (refrigerant handling), • Welding and fabrication experience, • Mobile service or field technician experience What We Offer, • Competitive hourly pay (based on experience), • Opportunity for overtime and on-call pay, • Company service vehicle (for qualified technicians), • Growth opportunities within a fast-growing company, • Hands-on, independent work environment

Job Description Diesel Direct is currently seeking a full-time Diesel Truck Mechanic for our East Providence, RI location. Duties include working on fleet delivery vehicles and customers. Maintains diesel equipment operation by completing inspections and preventive maintenance requirements; correcting vehicle deficiencies; making adjustments and alignments; keeping records. Essential Duties: • Inspecting, troubleshooting, diagnosing, and performing repairs and maintenance on equipment. Engine diagnostics a plus., • Welds equipment as needed., • Interpret work orders and technical manuals., • Repair or replace defective parts, components, or systems., • Test repaired equipment for proper performance and to ensure that the work meets the manufacturer's specifications and legislated regulations., • Able to work in a fast-paced work environment., • Must possess the strength and stamina required to work with heavy equipment and work in awkward positions., • The ability to work alone or as a team., • The ability to keep up with changing technology and updates. Required Knowledge, Skills, and Abilities:, • Experience working with oil and fuel trucks a plus, • Must supply own tools, • Ability to recognize vehicle maintenance needs; ability to interpret policies and procedures, maps, and route directions. Overtime sometimes required., • Must be able to lift 50 pounds., • OVERT TIME offered Diesel Direct is an equal employment opportunity employer Diesel Direct offers benefits to all eligible employees including 401k with company match! Come join the team. Here we grow again!!

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241584

Job Description A. Duie Pyle is seeking an experienced, skilled 1st shift Diesel Mechanic to join our Fleet Maintenance team at our Johnston, RI shop. This role requires technical skill with heavy duty trucks and is responsible for maintaining, diagnosing, and repairing the company’s fleet. Why Pyle? • Earn $30-$45 per hour based upon experience and skillset, • Weekly pay every Friday via direct deposit – overtime after 40 hours, • 7:00AM start time, Monday-Friday, • Modern, well-maintained shops with new equipment, • Company-funded Tool Reimbursement Program, • Paid vacation, PTO, and annual holidays, • Medical, Dental, Vision and Life Insurance, • 401(k) with Company Match; Annual Profit Sharing (100% employer paid), • Short Term and Long Term Disability, • Wellness Programs for yearly benefits discount Simply put, Pyle People Deliver. Since 1924, A. Duie Pyle has been family-owned and operated. Built by our core values of integrity, service first, and empathy, we’re dedicated to exceptional customer service and empowering our employee’s success. If you’re ready to build a career with a company that continues to lead the supply chain and logistics industries, we’d love to hear from you. Diesel Mechanic qualifications: • Minimum of 2 years’ experience repairing/maintaining Class 8 trucks, • A complete set of hand tools for heavy truck repair, • Vocational or Technical Training in diesel/heavy-duty vehicle experience; HS Diploma or equivalent preferred, but not required, • Willingness to learn and grow your abilities, • Ability to work independently with a “can-do” attitude Diesel Mechanic responsibilities include, but are not limited to: • Performing routine preventative maintenance and general repairs on Class 8 trucks, • Troubleshooting and repairing brakes, air systems, electrical components, suspension systems, etc., • Diagnosing and performing necessary repairs to the engine, electrical, and exhaust after-treatment systems, • Inspecting and replacing general components as required For a full job description associated with this posting, please contact A. Duie Pyle’s Human Resources department. This job posting is intended solely for external advertising purposes and does not represent a comprehensive list of all job-related duties and qualifications. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description A. Duie Pyle is seeking an experienced, skilled 3rd shift Diesel Mechanic to join our Fleet Maintenance team at our Johnston, RI shop. This role requires technical skill with heavy duty trucks and is responsible for maintaining, diagnosing, and repairing the company’s fleet. Why Pyle? • Earn $30-$45 per hour based upon experience and skillset, • $4.00 shift differential, • Weekly pay every Friday via direct deposit – overtime after 40 hours, • 11:00PM start time, Sunday-Thursday, • Modern, well-maintained shops with new equipment, • Company-funded Tool Reimbursement Program, • Paid vacation, PTO, and annual holidays, • Medical, Dental, Vision and Life Insurance, • 401(k) with Company Match; Annual Profit Sharing (100% employer paid), • Short Term and Long Term Disability, • Wellness Programs for yearly benefits discount Simply put, Pyle People Deliver. Since 1924, A. Duie Pyle has been family-owned and operated. Built by our core values of integrity, service first, and empathy, we’re dedicated to exceptional customer service and empowering our employee’s success. If you’re ready to build a career with a company that continues to lead the supply chain and logistics industries, we’d love to hear from you. Diesel Mechanic qualifications: • Minimum of 2 years’ experience repairing/maintaining Class 8 trucks, • A complete set of hand tools for heavy truck repair, • Vocational or Technical Training in diesel/heavy-duty vehicle experience; HS Diploma or equivalent preferred, but not required, • Willingness to learn and grow your abilities, • Ability to work independently with a “can-do” attitude Diesel Mechanic responsibilities include, but are not limited to: • Performing routine preventative maintenance and general repairs on Class 8 trucks, • Troubleshooting and repairing brakes, air systems, electrical components, suspension systems, etc., • Diagnosing and performing necessary repairs to the engine, electrical, and exhaust after-treatment systems, • Inspecting and replacing general components as required For a full job description associated with this posting, please contact A. Duie Pyle’s Human Resources department. This job posting is intended solely for external advertising purposes and does not represent a comprehensive list of all job-related duties and qualifications. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job DescriptionDIESEL VEHICLE MECHANIC (PART TIME) Overview: As a Wheeled Vehicle Mechanic, you’ll supervise and perform maintenance, repair, and recovery operations on wheeled vehicles and select armored vehicles that serve the Army in a variety of mission-critical roles. You’ll inspect, service, maintain, repair, replace, adjust, and test wheeled vehicles, material handling equipment systems, subsystems and components, and automotive electrical systems, including wiring harnesses and starting and charging systems. Job Duties: • Maintain wheeled vehicles, their associated trailers and material handling equipment systems., • Inspect, service, maintain, repair, replace, adjust, and test wheeled vehicles and material handling equipment systems, subsystems, and components., • Service automotive electrical systems, including wiring harness, starting, and charging systems., • Perform wheeled vehicle recovery operations.Requirements:, • Be between the ages of 17–35., • Be a U.S. Citizen or Permanent Resident., • Possess a High School Diploma or GED., • Mechanical Maintenance (MM): 92 on the ASVAB., • Those who want to serve must first take ASVAB, a series of tests that helps you better understand your strengths and identify which Army jobs are best for you. Training:Job training for a Wheeled Vehicle Mechanic requires 10 weeks of Basic Combat Training and 14 weeks of Advanced Individual Training at Fort Gregg-Adams, VA with on-the-job instruction. Part of this time is spent in the classroom, and part takes place in the field.Some of the skills you’ll learn are: Helpful Skills: • Interest in auto mechanics and the industrial arts., • Preference for physical work., • Troubleshooting and repairing mechanical problems., • Interest in automotive engines and how they work. FUTURE CIVILIAN CAREERS:The skills you learn will help prepare you for a career with service stations, auto dealers, farm equipment companies and state highway agencies. You'll be able to pursue a career as a garage mechanic, carburetor mechanic, transmission mechanic, radiator mechanic, construction equipment mechanic or endless track vehicle mechanic. Key Healthcare Benefits: TRICARE Health Plan: As a member of the U.S. Army, you and your family can be covered under the TRICARE Health Plan – a top-tier healthcare program that provides medical, dental, vision, and prescription coverage. No-Cost Healthcare: Active-duty members receive medical and dental care at no cost. Your family can also receive healthcare services at military or civilian facilities through TRICARE at little or no cost. Comprehensive Dental Care: Receive annual dental check-ups, cleanings, and necessary treatments. Vision Coverage: Coverage includes routine eye examinations and potential discounts on eyewear or corrective surgery. Health & Wellness Programs: Engage in preventive health programs, counseling services, fitness resources, and more to ensure you remain in the best of health. Maternity and Paternity Benefits: Expectant mothers receive comprehensive prenatal, labor, and postnatal care. New parents are also entitled to maternity and paternity leave. Long-term Care: Access to resources and programs that assist with long-term health needs or disabilities. Mental Health Services: Prioritizing the mental well-being of our service members, the U.S. Army offers counseling, therapy, and other mental health resources. Specialized Medical Training: Depending on your role, you may receive specialized medical training, ensuring that you're equipped with the skills to treat and manage a variety of health situations. Why the U.S. Army: Professional Growth: Engage in continued learning, training, and career advancement opportunities. Diverse Opportunities: From combat medic specialists to medical officers, choose a role that fits your passion and expertise. Community: Join a tight-knit community that prioritizes camaraderie, service, and mutual support. The U.S. Army is an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, gender, national origin, or protected veteran status and will not be discriminated against based on disability.

Job DescriptionMavis Tires & Brakes at Discount Prices - Automotive MechanicsPut your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Mechanics to join Team Mavis at one of our state-of-the-art automotive service, repair, and tire sales centers in the Seekonk, MA area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States.About the Position of Automotive MechanicAs Mavis's leaders in undercar repairs, our Automotive Mechanics are trusted to inspect, diagnose, and perform a wide variety of automotive services on customers' vehicles. Mavis's Automotive Mechanics perform a wide variety of undercar repairs, including brakes, struts, and shocks. Automotive Mechanics are also responsible for completing state-mandated inspections, changing oil and filters, checking fluids, replacing worn parts, and dismounting, mounting, rotating, and balancing tires.Employee BenefitsAt Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement.QualificationsWe recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Mechanic, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; (3) possess 2 years of experience and/or training in automotive repair and maintenance or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position; and (4) possess an extensive tool box of personal tools used in performing undercar repairs.The following additional qualifications are preferred: (1) state inspection license(s); and (2) ASE Certifications in Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5).As an active position, Automotive mechanics are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle maintenance and automotive repair. Mechanics must regularly lift and/or move items weighing over 50 pounds.What are you waiting for? APPLY NOW!Candidates can apply online at www.mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995.For more information about Mavis, please visit www.mavis.com.Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241585

Job Description We are seeking a Licensed Plumber to join our team! The selected individual will install and repair water supply lines and drainage systems. Responsibilities: • Assemble and install plumbing systems, • Troubleshoot and repair pipe and pipeline systems, • Review blueprints and building codes to determine optimal work procedures and apply to Projects, • Install Maintain and repair residential and commercial plumbing systems, • Adhere to safety policies and procedures Qualifications: • Previous experience in plumbing, maintenance, or other related field, • Ability to read blueprints and schematics and apply to projects, • Ability to handle physical workload, • Strong troubleshooting and critical thinking skills, • Excellent written and verbal communication skills, • minimum 2 years plumbing experience required, • underground rough plumbing experience preferred

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241598

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241579

Job Description About Us Come work with the best! At Maine Drilling & Blasting (MD&B) we work like owners because we are owners. As a majority employee owned ESOP Company, we work with the unity of family and the determination of business owners. Our standard is to achieve operational excellence at all levels of the organization, whether we are serving internal or external customers. We are fueled by success, because we are personally vested in the outcome. In addition to our employer-contributed Employee Stock Ownership Plan (ESOP) retirement program, we also have a traditional Company matched 401(k), health, dental, vision, life, and disability benefits. If advancement is what you’re looking for, we offer that also. Our learning and development opportunities are industry leading, and the formula for our success is centered on promotion from within. Intrigued? Read on to learn more about specific opportunities to join our dedicated team. About The Opportunity *Please note, this position will be based in Milford, MA. Pay Rate: $30-36/hr DOE, plus company vehicle with gas card. May be able to offer relocation assistance for the right candidate, if needed. We are experiencing explosive growth and looking to add hard working, motivated and skilled individuals to our highly dedicated teams within our large and growing geographic footprint. As a qualified Heavy Equipment Mechanic, you will use your mechanic knowledge and hands-on expertise to repair and maintain drill equipment, hoe-rams, skids steers, and various other equipment, both in a garage environment and at various job sites in the surrounding region. That means that you will be expected to: Replace and repair broken equipment; Perform PM on equipment; Trouble shoot mechanical equipment and systems such as motors, hydraulic, pneumatic, and electrical components; Follow all Company safety policies and procedures; Perform field services and repairs on various equipment; Coordinate with Equipment Manager on needed parts & supplies necessary to repair and rebuild items; Use and operate all hand and power tools in a safe and effective manner; View safety as paramount and pro-actively identify safety hazards; Complete accurate required maintenance documents and records; Participate in Equipment Manager meetings as needed; Other duties as assigned. In order to join our team, here’s what we will need from you: Must have own hand tools up to 1 5/8 or be willing to invest in tools as needed; Must have good driving record; Must be able to obtain DOT Medical Card; Ability to pass ATF screenings; Ability to perform all essential functions of the position; Physical ability to lift 50 - 100 lbs., 30 - 40% of the time, with stooping and bending 30 - 40% of the time Physical ability to work outside on uneven and loose surfaces in varying weather environments. About You This is a mid- level mechanic position, and as such you are most likely a high school or technical school graduate that is preferably ASE certified in automotive or heavy equipment maintenance. You will also bring at least 3-5 years of heavy equipment mechanic experience to go along with it. You are a self-starter and have the ability to work with limited supervision. You possess core skills, such as mechanical, hydraulics and pneumatics, diesel motors, welding, electrical systems, and PLC skills. You may also be recently separated from Military service and looking for an opportunity that will value your self-discipline and standards for safety and excellence. But honestly, this is not the only blueprint for success at MD&B. Dedication, enthusiasm, hard work, integrity, honesty, and responsibility are key indicators for us in any candidate interested in joining our world class team. Our team members are good communicators, highly competitive (we want to win!), and work together effectively to get the job done! Skeptical about advancement opportunities? Check out these videos: Dante (CST) talks about what it’s like to work at MD&B: https://www.youtube.com/watch?v=zrSWPW4Qbgo Jay (Service Supervisor) talks about his day to day at MD&B: (30) A Day In The Life of an Equipment Service Supervisor - Jay L. - YouTube Dan (CEO) talks about career advancement opportunities: https://www.youtube.com/watch?v=gvloIft9KPY Does this sound like you? If it does, then go ahead and hit that APPLY button because we cannot wait to meet you!

Job DescriptionAbout Zūm:Zūm is revolutionizing mass mobility with its Connected Mobility Experience (Zūm CMX™) system that connects and coordinates people, vehicles, and operations in real time. In the $50 billion student mobility market – the largest segment of the mass mobility industry – Zūm CMX is transforming a daily source of anxiety and disruption into a reliable, transparent, and efficient mobility experience for students and families. Today, more than 6,500 schools rely on Zūm CMX. Recognized globally for its innovative approach and operational execution, Zūm has been named to Fast Company’s World’s Most Innovative Companies, CNBC Disruptor 50 and Changemakers, the World Economic Forum, and the Financial Times’ Fastest Growing Companies lists. Zūm is backed by leading investors including Sequoia Capital, GIC, TPG, and Softbank. About the Role We're seeking a skilled Technician II to contribute to maintenance operations at one of our key sites. This role encompasses vehicle diagnostics, repairs, and preventive maintenance with increasing complexity. You'll diagnose mechanical and electrical issues, assist with major component rebuilds, and ensure vehicles meet stringent safety and compliance standards. You'll be a vital part of our transportation operations, maintaining fleet reliability and safety for students and communities. What Makes You Successful in This Role You're a developing technician who excels in a dynamic maintenance environment where challenges vary daily. You balance efficiency with meticulous attention to safety and quality standards. You're a capable problem-solver who can diagnose issues across major vehicle systems and execute repairs with confidence. You're eager to expand your skills and learn from senior technicians while taking ownership of your assigned work. You're comfortable performing diagnostics with modern tools, executing complex electrical and AC repairs, and maintaining thorough documentation. You keep your workspace organized, follow proper procedures, and consistently deliver quality repairs. Responsibilities Vehicle Diagnostics & Repair Diagnose malfunctions and perform vehicle repairs including steering, electrical, cooling, lubricating, braking systems, drive trains, suspensions, power steering units, clutches, transmissions, and oil, temperature, gas regulating components, and related assigned duties within qualification level, in accordance with all relevant Federal, State/Provincial and local guidelines and requirements. Assist Tech I’s with the rebuilding of engines, transmissions, and differentials as assigned by the manager. Perform test drives during Preventative Maintenance inspections to identify driver reported issues and conduct test drives after service to confirm repairs have been completed successfully. Maintenance Operations & Quality Control Arrange for and obtain appropriate inspections and approval of all major repairs before the vehicle is released from the maintenance facility. Identify and report any additional maintenance and/or repairs found necessary in conducting assigned repairs and maintenance including repairs and maintenance required to be performed by Technicians with a higher qualification level. Perform work assigned by manager or lead when supervised. Record time spent, parts used and repairs and/or maintenance conducted on the appropriate form. Perform road calls and on-the-road repairs as assigned. Safety & Compliance Maintain a safe, clean, productive, and efficient work area including ensuring the work area is in compliance with all relevant Federal, State/Provincial, local guidelines and requirements, and company Housekeeping standards and safety regulations. Advise Lead Technician of unsafe maintenance conditions or practices and/or vehicle abuse. Work assigned shift and overtime as needed (AM/PM). Qualifications Basic Qualifications: Minimum of two to four years medium/heavy truck Fleet mechanic repair experience. Diagnostic, Electrical, and AC skills are a must. Technical knowledge of major vehicle systems and diesel equipment is required. Previous fleet experience with familiarity with diesel and gasoline systems. Possess the recommended minimum hand tools for a Medium and Heavy Duty and Diesel Technician. Ability to use good judgment and decision-making skills. Preferred Qualifications: Valid CDL License (Must be able to obtain within the first 90 days of employment). ASE Certification in brakes, suspension, engine, electrical, A/C or a Master School Bus and/or a Master Truck Technician. Zūm Services, Inc. and all its subsidiaries provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: Diesel Mechanic I Department: Vehicle Maintenance Reports To: Automotive Supervisor Grade: 323G Shift: Mon-Fri 7:00 AM – 3:30 PM Days Off: Sat & Sun SUMMARY: Performs inspection, maintenance, and repair of Rhode Island Airport Corporation (RIAC) fleet vehicles and equipment, including diesel trucks, generators, small engines, and airfield support equipment. Ensures operational readiness to support airport safety, compliance with 14 CFR Part 139, and continuity of operations. ESSENTIAL DUTIES AND RESPONSIBILITIES: include the following. • Perform repairs and preventative maintenance activities on RIAC’s fleet of vehicles, heavy machinery, and equipment across the six airports., • Perform emergency and on-site repairs across airport properties, including roadside service as required. Operates vehicles for snow removal and sanding operations to maintain safe airfield and roadway conditions. Performs snow removal activities during snow events., • Review and maintain working knowledge of newly acquired vehicles and equipment, including operating and maintenance requirements., • Perform basic welding and fabrication tasks., • Adjust and repair truck body and lifts., • Generate documentation for initiating and tracking work orders, including parts pricing, labor, procurement, and completion., • Review invoice documents for accuracy, scope, and appropriateness of work performed by external vendors., • Coordinates maintenance appointments with internal and external customers., • Maintain inventory of parts and supplies, including tracking usage and initiating reorders., • Perform inspection, maintenance, and repair of emergency generators., • Complete daily maintenance reports, work logs, and other required documentation accurately and in a timely manner., • Other related duties may be assigned. SUPERVISORY RESPONSIBILITIES: None. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prior experience maintaining and repairing heavy-duty diesel vehicles, fleet equipment, or airport ground support equipment., • Experience operating snow removal equipment (e.g., plows, sanders) preferred., • Familiarity with computerized maintenance management systems (CMMS) or work order tracking systems., • Ability to read and interpret technical manuals, schematics, and diagnostic equipment outputs., • Strong organizational and documentation skills, including experience completing maintenance and compliance reports., • Proficient with Microsoft office suite, or ability to learn., • Must pass a required background check for security credentials which must be maintained as a condition of continued employment., • Must maintain a valid drivers license and remain insurable which must be maintained as a condition of continued employment., • Ability to obtain and maintain Movement Area authorization which must be maintained as a condition of continued employment., • Required to work overtime during call-ins, emergencies, and snow events. EDUCATION and/or EXPERIENCE: • High school diploma or recognized GED equivalency and completion of a vocation or trade school course in the field of diesel truck repair and maintenance., • Experience gained through employment as a general diesel mechanic for a construction company, trucking fleet operation, or provider of diesel truck equipment repair services., • Or any combination of education and experience that shall be substantially equivalent to the above education and experience. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Regular use of hands for handling, gripping, fingering, and reaching; frequent use of hand tools, power tools, and diagnostic equipment requiring manual dexterity and grip strength., • Frequent climbing, balancing, stooping, kneeling, crouching, and crawling., • Standing and walking for extended periods; frequent bending and repetitive motion throughout the work shift., • Ability to lift and/or move up to 50 pounds and push, pull, or maneuver heavy equipment and components., • Ability to work in confined spaces and in awkward or constrained positions for extended periods., • Ability to climb ladders and safely access elevated equipment and work areas., • Ability to work in varying lighting conditions, including low visibility environments., • Vision requirements include color vision, depth perception, and the ability to adjust focus., • Ability to wear required personal protective equipment (PPE), including respirators, hearing protection, and protective clothing. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Regular exposure to moving mechanical parts, fumes, airborne particles, and hazardous chemicals., • Frequent exposure to outdoor weather conditions, including extreme heat, cold, wind, and precipitation., • Exposure to fuel, lubricants, de-icing fluids, and other aviation-related chemicals., • Work performed in active airport operational areas requiring strict adherence to safety and security protocols., • Moderate to high noise levels depending on equipment in operation., • Exposure to vibration from tools and heavy equipment., • Work may involve emergency response, including snow removal and severe weather operations., • Potential for irregular or extended hours during operational emergencies or inclement weather events. This organization provides equal employment opportunity to all persons, regardless of age, race, religion, color, national origin, sex, sexual orientation/expression, political affiliations, marital status, and non-disqualifying physical or mental disability. This organization welcomes and encourages applications from minorities, veterans, and persons with physical and mental disabilities, and will reasonably accommodate the needs of those persons in the application process. The decision on granting reasonable accommodation request will be on a case-by-case basis.

Job Description Isuzu Trucks of Riverside, Rhode Island is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Job Description A. Duie Pyle is seeking an experienced, skilled 2nd shift Diesel Mechanic to join our Fleet Maintenance team at our Johnston, RI shop. This role requires technical skill with heavy duty trucks and is responsible for maintaining, diagnosing, and repairing the company’s fleet. Why Pyle? • Earn $30-$45 per hour based upon experience and skillset, • $2.00 shift differential, • Weekly pay every Friday via direct deposit – overtime after 40 hours, • 3:00PM start time, Monday-Friday, • Modern, well-maintained shops with new equipment, • Company-funded Tool Reimbursement Program, • Paid vacation, PTO, and annual holidays, • Medical, Dental, Vision and Life Insurance, • 401(k) with Company Match; Annual Profit Sharing (100% employer paid), • Short Term and Long Term Disability, • Wellness Programs for yearly benefits discount Simply put, Pyle People Deliver. Since 1924, A. Duie Pyle has been family-owned and operated. Built by our core values of integrity, service first, and empathy, we’re dedicated to exceptional customer service and empowering our employee’s success. If you’re ready to build a career with a company that continues to lead the supply chain and logistics industries, we’d love to hear from you. Diesel Mechanic qualifications: • Minimum of 2 years’ experience repairing/maintaining Class 8 trucks, • A complete set of hand tools for heavy truck repair, • Vocational or Technical Training in diesel/heavy-duty vehicle experience; HS Diploma or equivalent preferred, but not required, • Willingness to learn and grow your abilities, • Ability to work independently with a “can-do” attitude Diesel Mechanic responsibilities include, but are not limited to: • Performing routine preventative maintenance and general repairs on Class 8 trucks, • Troubleshooting and repairing brakes, air systems, electrical components, suspension systems, etc., • Diagnosing and performing necessary repairs to the engine, electrical, and exhaust after-treatment systems, • Inspecting and replacing general components as required For a full job description associated with this posting, please contact A. Duie Pyle’s Human Resources department. This job posting is intended solely for external advertising purposes and does not represent a comprehensive list of all job-related duties and qualifications. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description First Student is now hiring a Diesel Technician for our shop serving Warrick, West Warrick, Jamestown, and Scituate Foster in Warrick, RI! Hours/Schedule: Monday-Friday, Full-time day shift 2:00 pm - 10:30 pm If you take pride in keeping your community moving, this is your opportunity to make a real difference. Our team keeps students safe and on time every day-because behind every bus is a skilled mechanic who ensures reliability, safety, and peace of mind for families across our community. While First Student is North America's leading school transportation provider-serving more than 1,250 districts and 5.4 million student journeys daily-our focus here is local. You'll join a close-knit team that values collaboration, safety, and community connection. Why Join First as a Diesel Mechanic? • Pay Details: Dependent on experience and qualifications., • Hourly Rate: $23.00 - $24.00 per hour (NOT flat rate)., • Bonus rate increase available for each ASE School Bus Series test passed and maintained (up to $2/hour more)., • Monday-Friday day shift schedule with consistent, year-round work., • Company-paid ASE testing and training materials., • Company-paid CDL Class B training and licensing., • Excellent benefits package including medical, dental, vision, and 401(k) with company match., • Career Advancement Opportunities: Advance into operational, maintenance, management, and leadership roles in over 540 locations across the U.S. & Canada!, • Paid holidays and vacation time., • Annual allowances for boots and prescription safety glasses., • Discounts on cell phone plans, vehicles, and more through the PerkSpot program., • Employee Assistance Program (EAP): Counseling and support services for personal and work-related issues. About the Diesel Technician Position As a Diesel Technician with First Student, you will help maintain and repair school buses to ensure safety and reliability. Diesel Technician key responsibilities include: • Ensure vehicles are maintained and safe for our passengers., • Diagnose and perform all phases of vehicle maintenance including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Perform preventive maintenance (PMs), safety inspections, and annual maintenance inspections., • Complete work orders accurately., • Assist with mobile emergency repair services when needed. Diesel Technician Qualifications • At least 1 year of diesel or automotive maintenance and repair experience, or equivalent technical school education and experience., • Vehicle diagnostic and problem-solving skills., • Valid driver's license required., • CDL Class B or ability to obtain within 60 days of employment - Company paid training provided., • Possession of a mechanic's tool set to complete all assigned duties., • Willingness to participate in the ASE certification program (training, testing, and bonuses provided)., • Strong computer skills., • Note: This position is subject to DOT drug testing as a safety-sensitive employee. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason. Take the wheel and drive your career forward with First Student! Make an impact in your community while enjoying day shift schedules, great pay, and unmatched support. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241588

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241587

Job Description Job Title: Automotive Tech Light duty Diesel and Gas Location: Mass Diesel Performance, Bellingham, MA Mass Diesel Performance is seeking a motivated Automotive Technician specializing in gas, light-duty diesel, or both. Join our clean, climate-controlled shop and work on routine maintenance, diagnostics, general repairs, and performance upgrades—from mild to wild. Schedule & Employment: • Full-time or part-time, Monday–Friday, 8:30 AM – 5:30 PM, • No weekends required; overtime available but optional Key Responsibilities: • Inspect, diagnose, and repair gas and diesel engines, • Perform routine services: oil changes, brakes, tires, engine/transmission work, wiring, • Run and interpret diagnostic tests using factory and aftermarket equipment, • Write detailed inspection reports and repair plans, • Collaborate with fellow techs to ensure efficient, high-quality repairs, • Stay updated with industry best practices and manufacturer updates Qualifications: • Automotive experience required; diesel or gas engine experience preferred, • Detail-oriented, dependable, and team-focused, • General techs eager to grow in diesel or performance repair Benefits & Perks: • Competitive pay: $30 to $60 hour based on experience, • Health insurance, 401(k) match, uniforms, • Paid vacation and training/certification opportunities (MA State Vehicle Inspector License provided if needed), • Long-term, stable opportunity with an experienced team How to Apply: If you are a motivated automotive professional looking for a stable position with a growing shop, we encourage you to apply. Apply now to this listing! #hc231520

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241592

Job Description Job Summary: Installs, operates, services and repairs environmental-control systems in Government Healthcare Facilities, utilizing knowledge of refrigeration theory, HVAC troubleshooting and building automation. Primary Job Functions: • Performs day to day operations for HVAC and Building Automation maintenance in Government Healthcare Facilities, • Performs preventive maintenance and unscheduled maintenance on a variety of HVAC and Building Automation systems, • Troubleshoots and repairs a variety of HVAC and Building Automation systems and devices, • Mounts compressor and condenser units on platform or floor, using hand tools, following blueprints or engineering specifications., • Installs evaporator unit in chassis or in air-duct system, using hand tools., • Cuts and bends tubing to correct length and shape, using cutting and bending equipment and tools. Cuts and threads pipe, using machine-threading or hand-threading equipment. Join tubing or pipes to various refrigerating units by means of sleeves, couplings or unions, and solders joints, using torch, forming complete circuit for refrigerant. Installs expansion and discharge valves in circuit., • Connects motors, compressors, temperature controls, humidity controls and circulating ventilation fans to control panels and connects control panels to power source. Installs air and water filters in completed installation. Injects small amounts of refrigerant into compressor to test systems and adds freon gas to build up prescribed operating pressure. Observes pressure and vacuum gauges and adjusts controls to ensure proper operation., • Tests joints and connections for gas leaks, using gauges or soap-and-water solution. Wraps pipes in insulation batting and secure them in place with cement or wire bands. Replace defective breaker controls, thermostats, switches, fuses and electrical wiring to repair installed units, using electrician's hand tools and test equipment. May install, repair and service air conditioners, ranging from fifteen to twenty tons cooling capacity, in warehouses and small factory buildings. Performs other work-related duties as assigned Education, Experience and Certification: Required: High School Diploma or equivalent Required: Related job experience Required: State license certification Working Conditions: • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc. Knowledge, Skills, and Abilities: • State license/certification required., • Must be able to pass background check and required Government security clearances., • Ability to read and understand blueprints., • Obtain and maintain required certifications Disclaimer: CBRE Government and Defense is thrilled at the opportunity for you to apply to one of our roles. The rate for this position is $33-35/Hr +Fringe. This position may also be eligible for a wide range of benefits based on applicable bargaining unit agreements. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES.

Job Description Master Technician - Residential HVAC/R and Pipefitting - Base Salary to 60.00/hour - East Providence, RI • Our client is a growing provider of residential home comfort services, delivering heating, cooling, plumbing, and energy-related solutions throughout the region. They are seeking a Master Technician – Residential HVAC/R & Pipefitting to serve as a senior technical resource for complex residential heating, ventilation, air conditioning, and refrigeration systems., • This role is responsible for advanced HVAC/R diagnostics and troubleshooting, precision installation, pipefitting, brazing and soldering, system commissioning, complex repairs, and technical problem-solving. The Master Technician will work with residential HVAC/R equipment, refrigeration circuits, hydronic systems, electrical controls, airflow systems, refrigerant piping, copper piping, and related residential HVAC systems., • In addition to hands-on technical work, this position serves as a point of escalation for complex service issues, provides technical guidance to other technicians and apprentices, and communicates directly with homeowners regarding system conditions, repair options, and recommendations. Responsibilities: • Diagnose complex mechanical, electrical, electronic, refrigeration, and airflow problems., • Troubleshoot residential HVAC/R systems, including heat pumps, gas furnaces, ductless mini-splits, zoning systems, and related equipment., • Diagnose refrigeration-cycle problems and identify root causes., • Perform refrigerant recovery, evacuation, charging, leak detection, and system testing., • Evaluate HVAC system performance and identify opportunities to improve reliability and energy efficiency., • Complete complex HVAC/R repairs and equipment replacements according to applicable requirements., • Commission residential HVAC/R systems and verify proper operation following installation or repair., • Layout, measure, fabricate, and install refrigerant piping and residential HVAC line sets., • Install and modify copper piping, PVC drainage, and hydronic piping systems., • Perform brazing and soldering of refrigeration and piping connections., • Follow appropriate procedures for refrigerant-line preparation, joining, evacuation, and leak testing., • Plan piping routes through residential structures while accounting for equipment location, access, drainage, airflow, and serviceability., • Read and interpret equipment documentation, mechanical drawings, blueprints, and HVAC system layouts., • Complete required cutting, drilling, mounting, and structural access work associated with equipment and piping installation., • Verify piping and system configurations before startup and commissioning., • Serve as a technical escalation point for complex residential HVAC/R, refrigeration, and pipefitting problems., • Provide technical guidance and hands-on mentorship to technicians and apprentices., • Assist technicians with HVAC troubleshooting, complex service calls, and repair strategies., • Review completed HVAC/R work for technical quality, safety, and compliance., • Provide guidance on diagnostic procedures, equipment operation, installation practices, refrigeration systems, and troubleshooting techniques., • Help establish consistent field practices for complex HVAC/R installations and repairs., • Communicate technical findings directly to homeowners., • Explain system conditions, repair requirements, and available solutions., • Answer homeowner questions regarding HVAC/R equipment operation, maintenance, repairs, and system performance., • Maintain a clean and organized work environment at residential job sites., • Follow applicable federal, state, and local HVAC/R, mechanical, environmental, and building requirements., • Maintain compliance with refrigerant-handling requirements and applicable OSHA safety practices., • Follow safe procedures when working with refrigerants, electrical systems, combustion equipment, torches, piping, tools, and mechanical equipment., • Use appropriate personal protective equipment and job-site safety procedures., • Verify installations and repairs meet applicable manufacturer requirements and mechanical codes., • Maintain accurate HVAC service and installation documentation. Qualifications: • Master-level experience in residential HVAC/R service, installation, or a closely related trade., • Demonstrated experience diagnosing and repairing complex residential HVAC systems., • Demonstrated refrigeration-system knowledge, including refrigerant recovery, evacuation, charging, and leak diagnosis., • Demonstrated pipefitting experience involving refrigerant, copper, drainage, and/or hydronic piping., • Ability to braze and solder copper refrigeration and piping connections., • Ability to read and interpret mechanical drawings, equipment documentation, and system layouts., • Working knowledge of electrical controls and HVAC/R electrical troubleshooting., • Ability to diagnose airflow and HVAC system-performance problems., • Knowledge of applicable HVAC/R, environmental, mechanical, and safety requirements., • Experience communicating technical HVAC/R information directly to homeowners., • Experience providing technical guidance to HVAC technicians or apprentices. Compensation: • Base salary in the 40.00/ hour - 60.00/hour range with commission opportunities and benefits. #INDALL

Job Description Title: HVAC Service Technician Location: Providence, RI Schedule: 7:30-3:30 Pay: $45hr Benefits • Company paid medical and dental insurance, • 401k with match, • PTO and paid holidays, • Company van and gas card Job Responsibilities • Residential and light commercial service calls, • Diagnose and repair hvac systems independently in the field Qualifications • Journeyman Card #hc255483

Job Description HVAC Service Technician - Residential HVAC - Base Salary to 55.00/hour - East Providence, RI • Our client is a growing provider of residential home comfort services, delivering heating, cooling, plumbing, and energy-related solutions throughout the region. They are known for dependable service, quality workmanship, and a strong commitment to customer satisfaction., • This position is responsible for installing, servicing, troubleshooting, and repairing residential heating, cooling, plumbing, and oil-fired systems while delivering exceptional customer service and maintaining high-quality workmanship. The role includes routine maintenance, emergency service, equipment replacement, and participation in an after-hours on-call rotation. Responsibilities: • Install, maintain, troubleshoot, service, and repair residential HVAC, heating, cooling, plumbing, and oil-fired systems, • Diagnose equipment malfunctions and recommend appropriate repair or replacement solutions, • Perform preventative maintenance, emergency service calls, and equipment replacements, • Ensure all work complies with manufacturer specifications, company standards, and applicable codes, • Review daily schedules, work orders, and project requirements, • Coordinate with office staff and management to ensure jobs are properly prepared and equipped, • Verify required materials, tools, equipment, and labor resources before beginning work, • Communicate project timelines, service interruptions, and recommendations to customers, • Complete service calls and installations efficiently while maintaining quality workmanship, • Document work performed through service notes, photos, and job records, • Provide technical guidance and mentorship to junior technicians when assigned, • Troubleshoot job-site challenges and communicate issues to management as needed, • Test and inspect completed systems to verify proper operation and performance, • Review completed work with customers and explain system operation, maintenance requirements, and equipment features, • Maintain a clean, safe, and professional work environment, • Collect payments and complete required documentation when necessary, • Participate in a rotating after-hours on-call schedule and respond to emergency service requests as needed Qualifications: • Experience servicing, repairing, troubleshooting, maintaining, and installing residential HVAC systems, • Experience working with residential heating systems, cooling systems, oil-fired equipment, and plumbing systems, • Strong diagnostic, troubleshooting, and mechanical aptitude, • Experience performing preventative maintenance and emergency service repairs, • Ability to read and interpret technical manuals, wiring diagrams, schematics, and equipment specifications, • Strong customer service, communication, and problem-solving skills, • Ability to work independently and collaboratively within a team environment, • Ability to travel to customer locations throughout the service area, • Ability to lift, carry, and maneuver equipment, tools, and materials required for the position, • Ability to work in varying weather conditions, basements, crawl spaces, attics, and mechanical rooms Compensation: • Base salary in the 25.00 - 55.00/hour range, plus commission opportunities, • Paid Time Off, • 401k Plan, • Medical, dental, vision insurance #INDALL

Job Description Here at GEM, we provide career opportunities to master your craft, earn competitive wages, and make a real difference in the lives of our customers and our community. We are looking for employees that take pride in their work and see plumbing as both an art and a trade. While working with us expect to be treated like family - because you are! You will work in an environment where your hard work is rewarded, recognized, and appreciated. Your daily contributions will have a direct effect on the success of the company and your future. If you want to be part of something bigger than just a job - make this career move and apply today! As the Residential HVAC Service Technician, you will repair, maintain, and replace all HVAC equipment for the benefit of our customers. This position is full time with benefits. Responsibilities • Install, repair, and replace various HVAC systems sometimes in confined or high places, • Provide world-class customer service to our customers on a daily basis, • Complete paperwork in a timely and efficient manner, • Maintain clean work area, • Work closely with all other workers and supervisors while maintaining a polite, professional attitude, • Arrive on time to all jobs ready to work, • Attend company meetings as necessary, • Adhere to all safety and handbook policies Qualifications • Possess a RI or MA Journeyman License - Up to $10K Sign on Bonus!, • Prior Residential HVAC service experience, • Excellent customer service and communication skills, • Strong organizational skills, • Must be able to work on-call and weekend hours Benefits • Medical, Dental, and Vision Insurance, • 401K Plan with Company Match, • Holiday Pay, • Long Term Disability, • Company Paid Life Insurance, • Flexible Spending Account, • Great Company Culture, • Company iPhone & iPad, • Company Provided Vehicle with Fuel Package Sign On Bonus • Must have a RI, MA or CT Journeyman or Master license to qualify for the Sign On Bonus Additional Perks • Fitted and Customized Company Uniforms, • Continuous and extensive training and development GEM is an Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.

Job Description $5,000 SIGN ON BONUS AVAILABLE FOR LICENSED TECHNICIANS Location: Lincoln, RI Job Title: Commercial HVAC Service Technician Are you looking for a career with a family-oriented company that values your growth? Our growing team is looking for commercial HVAC service technicians with experience in Commercial Service. This is an ideal opportunity for a commercial HVAC service technician to join a team that is dedicated to enriching the lives of their team, their customers, and the communities they serve! Responsibilities and Expectations: Be an outgoing, friendly, and knowledgeable Service Technician who builds relationships with customers and solves their HVAC problems, whether it is maintenance risks or diagnosing electrical and mechanical faults. Work on a wide range of Commercial equipment, giving you the chance to diagnose, troubleshoot, repair, and maintain systems including air conditioning systems, fan coils, air handling units, chillers, boilers, pumps, cooling towers, Makeup Air Units, ERVs, WSHPs, HVAC Control Systems, Refrigeration Equipment, and exhaust systems. Provide business owners or maintenance managers with honest, fact-based opinions to help them make informed decisions. Proactively identify and fix small problems before they turn into bigger, more expensive repairs. Work under minimum supervision while also being part of a supportive team. Prioritize safety, observing all safety regulations, and being familiar with OSHA and EPA requirements. Provide guidance and share your expertise with those new to the trade. Maintain mindfulness and clear communication. Take pride in completing all jobs and paperwork neatly, accurately, thoroughly, and on time. Requirements: 2-5 years of Commercial HVAC service experience REQUIRED EPA Certification is REQUIRED RI Journeyman (Refrigeration) license is REQUIRED Associate degree (A.A.) from a two-year college or technical school is beneficial but not required. Strong drive to do the job right the first time and pride in your work. Commitment to lifelong learning and growth in the trade. Valid and current driver's license with an insurable driving record. Proficiency with technology, including working from an iPad and professional email communication. What We Can Do For You: Competitive Compensation of $35 - $55/hour plus spiffs! A stable work environment where your growth is encouraged and supported. Continuous and extensive training and development opportunities. Medical, dental, and vision insurance Long-term disability, short-term disability, and company-paid life insurance. 401K plan with company match. PTO and paid holidays. Company Provided – vehicle, gas card, uniform, phone and tablet. Yearly Tool Allowance. The compensation for this position is expected to range between $35.00 - $55.00 per hour. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job Description About Plumbing Systems Inc. (PSI) Plumbing System Inc. is an established company with over 30 years of experience providing top-tier service and quality products in many areas around the Vail Valley and Summit County area. SIGN-ON & RELOCATION OFFERED | ROLE IS BASED IN COLORADO | GYPSUM, CO At Plumbing Systems Inc. (PSI), we believe in doing things the right way - with skill, integrity, and dedication to our customers. We are looking for an experienced HVAC Service Technician to join our team and provide exceptional residential and commercial HVAC service throughout our community. In this role, you'll diagnose and repair HVAC systems, educate homeowners on solutions, and deliver the high-quality service experience that PSI is known for. If you take pride in your craftsmanship, enjoy solving problems, and want to be part of a team that values professionalism and growth, we'd love to meet you. What You'll Do • Diagnose, service, and repair residential and commercial HVAC systems., • Troubleshoot system issues and provide accurate, long-term solutions., • Build trust with customers by clearly explaining findings and recommending the best options for their needs., • Educate homeowners on repairs, maintenance plans, system improvements, and replacement solutions., • Identify opportunities to improve system performance and customer comfort., • Maintain strong communication with customers, dispatch, and internal teams to ensure a seamless service experience., • Maintain a clean, organized service vehicle and professional job sites., • Complete invoices, service documentation, option sheets, and timecards accurately., • Participate in training, team meetings, trade events, and professional development opportunities., • Mentor and support apprentices by sharing technical knowledge and best practices. What We're Looking For • Active HVAC license and strong knowledge of local HVAC codes and standards., • Proven experience installing, replacing, diagnosing, and servicing HVAC systems., • Strong technical troubleshooting skills with the ability to read and interpret diagrams and blueprints., • Excellent communication and customer service skills., • Strong organization, attention to detail, and follow-through., • Positive attitude with a high-integrity, team-focused mindset., • Ability and desire to continue developing technical skills and industry certifications., • Experience with residential and commercial HVAC systems preferred. What to Expect on the Job • Follow all company safety policies and OSHA guidelines., • Regularly stand, walk, bend, climb ladders, and work in confined spaces., • Ability to lift and move 50+ pounds regularly., • Work in varying weather conditions throughout the year., • Standard schedule: Monday-Friday, 7:30 AM-5:00 PM, with occasional on-call rotation. The pay for this position is $35-$45/hour or more depending on job-related knowledge, skills, experience, and location, plus performance based incentives. Other incentive pay may be provided as part of the compensation package, in addition to a full range of medical, financial, and/or other benefits, depending on the position offered. Benefits and Perks: Plumbing Systems Inc. (PSI) treats its team members with the same level of dedication and care as we do our customers, which is why we're fortunate to provide all of our employees with: • Competitive Pay, • Benefits: We offer top-notch benefits!, • Various medical, dental & vision plans, including 100% employer covered options for you, • 401(k) with a company match up to 3.5%, • 100% Company paid long & short-term disability and life insurance, • Flexible spending accounts for health and dependent care, • Training and Career Growth: We are scaling quickly and would support this person's career growth and development, • Paid Time Off: 6 company paid holidays, 3 weeks of PTO, and a paid Parental Leave Policy, • Company Provided: Company branded attire and company vehicle provided for certain roles Plumbing Systems Inc. (PSI) is proud to be an equal opportunity employer. We provide employment opportunities without regard to age, race, color, ancestry, national origin, religion, disability, sex, gender identity or expression, sexual orientation, veteran status, or any other protected status in accordance with applicable law.

Job Description Experienced HVAC Service Technician CARJON Air Conditioning & Heating Smithfield, RI $35 - $45 per hour + Bonuses Company Van • Weekly Pay • Up to 5 Weeks PTO Tired of being just another number on a spreadsheet? Looking for a company that actually values your skills, pays you what you're worth, respects your time, and gives you the tools and support to succeed? CARJON is hiring Experienced HVAC Service Technicians who want a real career home - not just another job. We're a locally owned, independent company that's been doing things the right way in Rhode Island for over 35 years, and we're looking for skilled techs who take pride in their work and want to be part of a team that has your back. What You'll Earn • $35.00 - $45.00 per hour (depending on experience) + performance bonuses, • Weekly direct deposit pay, • Medical Insurance (70% company-paid) + Dental, Vision, and Life Insurance, • 401(k) with company match after 1 year, • Up to 5 weeks Paid Time Off, • 10 Paid Holidays, • Flexible Spending Account (FSA), • Up to $1,000 per year for education & training, • Tool program, • Company van, uniform, and all necessary equipment provided Schedule Monday - Friday, 8:00 AM - 5:00 PM (On-call rotation as needed - we keep it fair and manageable) What You'll Do • Perform maintenance, troubleshooting, and repairs on a wide variety of residential heating and air conditioning systems, • Deliver outstanding customer service and clear recommendations on every call, • Work independently while being fully supported by a strong team, • Provide feedback to the Service Manager on training needs, inventory, and pricing What You Need • Active Rhode Island Journeyman HVAC License (PJ2 and/or RJ2), • Strong mechanical background and 5+ years of hands-on experience, • Clean, insurable driving record, • Ability to read wiring diagrams and blueprints, • Experience making repair vs. replace decisions, • Advanced customer service skills and willingness to take on leadership roles, • Knowledge of basic sheet metal practices and air balancing principles, • Universal EPA Certification, • Familiarity with major brands (American Standard, Trane, Rheem, Mitsubishi, Fujitsu, Viessmann, Burnham, Honeywell, York, Ruud, Goodman, Carrier, Bryant, Amana, Lennox, etc.) If you're a skilled, dependable technician who wants top pay, excellent benefits, year-round work, and a company that truly respects you and invests in your success, CARJON is the place for you. Apply today - we're ready to talk with motivated techs who want a real career, not just another job. NO PHONE CALLS OR IN-OFFICE INQUIRIES. All candidates must apply online. a126 Candidates will be required to pass a background check and drug test upon being given a conditional offer of employment.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact Pearce is seeking Experienced HVAC Technicians to join our team for servicing and repairing commercial HVAC equipment on telecom shelters located on Cell Tower sites. This is a fast-paced and rewarding job that is best suited for individuals who are responsible, self-directed, highly motivated, willing to travel, and looking to learn and grow in the Telecom industry. This is a regional position. Candidates should reside within 60 miles of Pawtucket, Rhode Island area. Core Responsibilities • Maintaining cooling systems – diagnosing, troubleshooting, repairing, or installing and replacing components of entire systems., • Conducting performance checks and regular maintenance on HVAC equipment., • Performing additional maintenance or upgrades to out-of-season HVAC equipment., • Responding to service calls in a timely manner, including emergency call out services., • Timely and accurate completion of daily work reports., • Operate and maintain a motor vehicle safely and legally per the PEARCE Employee Handbook and insurance requirements. Specific duties may vary or evolve over time based on business and client needs. Core Experience • Must be Level 2 or Universal EPA Certified (Required)., • 3+ years of experience with HVAC maintenance (commercial preferred)., • Basic knowledge of electronic, mechanical, and electrical components including refrigeration systems is preferred., • Must be able to communicate effectively both verbally and by email. Physical/Work Environment At Pearce safety is our number one concern. Candidates must be able to comply with OSHAFCC/FAA/EPA Standards. • Candidates should reside within 60 miles of Pawtucket, Rhode Island area., • Must be available for after-hours and weekend call outs on occasion., • Extensive daily travel in an independent work structure., • Occasional overnights required-company pays all travel costs and provides per diem., • Driving to remote work sites as needed., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds)., • Will be required to pass a Department of Transportation (DOT) physical. Compensation: $24.00-$43.00 hourly/DOE At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$24—$43 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description $5,000 SIGN ON BONUS AVAILABLE FOR LICENSED TECHNICIANS Location: Lincoln, RI Job Title: HVAC Service Technician Are you ready to roll up your sleeves and join a team that's all about your growth and success? We're not just about the job – we're about building careers that last. We're proud to be a company that values good old-fashioned hard work and the satisfaction of a job well done. We work hard but we have FUN too! As an HVAC Service Technician with us, you'll be in the thick of it, maintaining and fixing residential indoor air quality systems like a pro. From air conditioners to everything in between, you'll be the go-to expert for getting the job done right. Work for a supportive company that wants to see you grow in your HVAC career. Responsibilities and Expectations: Perform maintenance, and repair of residential HVAC systems, encompassing heating, cooling, and ventilation equipment. Diagnoses and troubleshoot issues with HVAC systems, pinpointing the root cause of malfunctions and proposing effective solutions. Conduct regular inspections and preventive maintenance to uphold optimal system performance and prevent potential problems. Install, repair, or replace various components, including compressors, motors, fans, thermostats, filters, and ductwork. Interact with customers professionally and courteously, addressing their concerns, explaining repair options, and suggesting system improvements. Maintain accurate documentation of service activities, detailing equipment status, repairs conducted, parts utilized, and time allocated for each job. Remain informed about industry advancements, best practices, and emerging technologies to continually enhance technical expertise and knowledge. Requirements: Minimum of 3-5 years of hands-on experience in residential HVAC systems. RI Journeyman (Refrigeration) license REQUIRED A valid EPA certification REQUIRED OSHA, NATE or CFC certifications are a plus. Proficient in diagnosing and repairing residential HVAC systems with strong technical skills. Solid knowledge of HVAC codes, regulations, and safety standards. Excellent communication and customer service skills. Ability to work in various settings, including attics and crawl spaces. Physically capable of lifting 50+ pounds Maintain a clean driving record. Ability to successfully pass a background check. Ability to work on-call. What Can We Do for You? Competitive Compensation of $35 - $55/hour plus spiffs! A stable work environment where your growth is encouraged and supported. Continuous and extensive training and development opportunities. Medical, dental, and vision insurance Long-term disability, short-term disability, and company-paid life insurance. 401K plan with company match. PTO and paid holidays. Company Provided – vehicle, gas card, uniform, phone and tablet. Yearly Tool Allowance. The compensation for this position is expected to range between $35.00 - $55.00 per hour. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job DescriptionWe're not looking for someone to fill a truck we're looking for someone to grow with us. As MJ Electric & Refrigeration continues to expand throughout Rhode Island and Massachusetts, you'll have the opportunity to work on a wide variety of commercial HVAC, refrigeration, and mechanical systems while building a long-term career. We offer challenging commercial and industrial work, a supportive team environment, and leadership that understands the trade because we've spent decades working in it ourselves. POSITION SUMMARYThe HVAC/R Service & Installation Technician is a skilled field professional responsible for servicing, repairing, and installing HVAC and commercial refrigeration systems for commercial customers. This is a hands-on, customer-facing role that requires solid technical ability, a professional attitude, and a genuine commitment to doing quality work. CORE RESPONSIBILITIESService & Repair • Diagnose and troubleshoot HVAC/R system malfunctions including heating, cooling, ventilation, and refrigeration equipment, • Perform repairs on furnaces, heat pumps, air handlers, condensing units, refrigeration systems, and related components, • Conduct routine preventive maintenance on all system types per manufacturer specifications and company standards, • Recover, handle, and recharge refrigerants in compliance with EPA Section 608 regulations, • Read and interpret wiring diagrams, schematics, and equipment manuals to guide diagnostic and repair work, • Test repaired systems to confirm proper operation before leaving the job site, • Accurately complete all work orders, service reports, and time logs, • Identify additional repairs or improvements needed and communicate findings clearly to the service managerInstallation, • Install new HVAC/R equipment including Rooftop Units, Variable Refrigerant Flow (VRF/VRV) systems, chillers, split systems, heat pumps, air handlers, furnaces, and refrigeration systems, • Run refrigerant lines, electrical wiring, flue venting, condensate drains, and ductwork connections per job specifications and local code, • Perform system startup, commissioning, and performance testing on all new installations, • Follow installation drawings, load calculations, and manufacturer instructions to ensure correct equipment sizing and placement, • Coordinate with other trades and the installation crew when working on larger projects, • Leave installation sites clean, organized, and customer-ready at the end of every jobSafety & Compliance, • Follow all OSHA, company, and manufacturer safety requirements at every job site, • Use personal protective equipment (PPE) properly and consistently, • Report any accidents, near-misses, or unsafe job site conditions to the supervisor immediately, • Maintain current EPA 608 certification and any other licenses required by state or local jurisdiction, • Operate all tools, equipment, and company vehicles safely and responsiblyCustomer Service, • Arrive on time, in uniform, and prepared for every scheduled appointment, • Greet customers professionally and explain what you are doing and why in plain, easy-to-understand terms, • Present repair or replacement options honestly so the customer can make an informed decision, • Protect the customer’s home or business — use drop cloths, shoe covers, and clean up thoroughly before leaving, • Address customer concerns calmly and professionally; escalate to the service manager when neededVehicle & Equipment, • Keep your company vehicle clean, organized, and stocked with commonly used parts and supplies, • Perform basic vehicle maintenance checks (fluid levels, tire pressure) and report any issues promptly, • Care for all assigned tools and equipment; report damage or loss to the supervisor immediately, • Track parts and materials used on each job accurately for invoicing purposesQUALIFICATIONSRequired, • Minimum 3 years of independent hands-on HVAC/R field experience (service, installation, or both), • Rhode Island or Massachusetts Refrigeration license, • EPA Section 608 certification (Universal preferred; Type II minimum), • Working knowledge of electrical, refrigeration, and mechanical systems, • Ability to read wiring diagrams and equipment manuals, • Valid driver’s license with a clean driving record, • Reliable, punctual, and able to manage a daily workload with minimal supervision, • Professional appearance and strong communication skills with customersPreferred, • Experience with both commercial and residential equipment, • Familiarity with Service Fusion, ServiceTitan, etc dispatch software and mobile work order apps and scheduling, • Prior experience with refrigeration systems (walk-in coolers, reach-ins, ice machines) PHYSICAL REQUIREMENTSThis is a physically demanding field role. All technicians must be able to:, • Lift and carry up to 75lbs regularly; occasionally more with assistance, • Work in confined spaces, attics, crawlspaces, mechanical rooms, and on rooftops, • Stand, kneel, crouch, bend, and climb ladders for extended periods throughout the day, • Work in all weather conditions year-round, hot roofs in summer and cold roofs in winter, • Drive a company vehicle safely, sometimes for extended periods during the workdayWHAT WE OFFEROur full compensation package includes:, • Competitive hourly rate based on experience and licensing, • Overtime pay for hours worked beyond 40/week, • On-call stipend for scheduled on-call rotation, • Performance bonuses, • Tool and work gear stipends, • Cell phone reimbursement, • Company paid medical, dental, and vision insurance, • 401(k) with company match, • Paid time off + Paid Holidays Powered by JazzHR XYAaw7wFjY

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety At Kelso Industries, 4,000+ employees across 40+ companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. About the Role Rowbel Services is looking for an experienced HVAC Service Tech to join our team. In this role, you'll be the expert our clients rely on — diagnosing problems quickly, performing quality repairs, and keeping commercial and residential systems running at peak performance. If you take pride in your craft and want to work for a company that invests in your growth, we want to hear from you. What You'll Do • Diagnose and repair HVAC systems, including rooftop units, split systems, boilers, chillers, and heat pumps., • Perform routine maintenance and inspections to ensure optimal system performance and longevity., • Troubleshoot electrical and mechanical issues in HVAC equipment., • Replace or repair defective components such as motors, compressors, fans, and thermostats., • Interpret wiring diagrams, schematics, and technical manuals., • Communicate effectively with clients and team members regarding service findings and recommendations., • Maintain accurate service records, including work performed, parts used, and system conditions., • Ensure all work complies with safety standards, building codes, and company policies. Qualifications Required: • 3+ years of experience as an HVAC Service Technician or in a similar role., • Proficiency with VRF Systems and light commercial work., • EPA 608 certification., • Strong understanding of HVAC systems, electrical circuits, and mechanical components., • Ability to read and interpret technical documents and blueprints., • Valid driver's license and ability to travel to job sites., • High school diploma or equivalent. Preferred: • NATE certification or equivalent., • Familiarity with digital service tools and mobile work order platforms. Compensation & Benefits • Hourly Rate: Up to $50/hour, depending on experience and qualifications., • Comprehensive health, dental, and vision insurance., • 401(k) with company match., • Paid time off and holidays., • Ongoing professional training and certification support. Pay Range: $25-$50 / Hour Why Join Kelso Industries? Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Job Description About the Role Rowbel Services is looking for an experienced HVAC Service Tech to join our team. In this role, you'll be the expert our clients rely on — diagnosing problems quickly, performing quality repairs, and keeping commercial and residential systems running at peak performance. If you take pride in your craft and want to work for a company that invests in your growth, we want to hear from you. What You'll Do • Diagnose and repair HVAC systems, including rooftop units, split systems, boilers, chillers, and heat pumps., • Perform routine maintenance and inspections to ensure optimal system performance and longevity., • Troubleshoot electrical and mechanical issues in HVAC equipment., • Replace or repair defective components such as motors, compressors, fans, and thermostats., • Interpret wiring diagrams, schematics, and technical manuals., • Communicate effectively with clients and team members regarding service findings and recommendations., • Maintain accurate service records, including work performed, parts used, and system conditions., • Ensure all work complies with safety standards, building codes, and company policies. Qualifications Required: • 3+ years of experience as an HVAC Service Technician or in a similar role., • Proficiency with VRF Systems and light commercial work., • EPA 608 certification., • Strong understanding of HVAC systems, electrical circuits, and mechanical components., • Ability to read and interpret technical documents and blueprints., • Valid driver's license and ability to travel to job sites., • High school diploma or equivalent. Preferred: • NATE certification or equivalent., • Familiarity with digital service tools and mobile work order platforms. Compensation & Benefits • Hourly Rate: Up to $50/hour, depending on experience and qualifications., • Comprehensive health, dental, and vision insurance., • 401(k) with company match., • Paid time off and holidays., • Ongoing professional training and certification support. Pay Range: $25-$50 / Hour

Job Description Here at GEM, we provide career opportunities to master your craft, earn competitive wages, and make a real difference in the lives of our customers and our community. We are looking for employees that take pride in their work and see plumbing as both an art and a trade. While working with us expect to be treated like family - because you are! You will work in an environment where your hard work is rewarded, recognized, and appreciated. Your daily contributions will have a direct effect on the success of the company and your future. If you want to be part of something bigger than just a job - make this career move and apply today! As the Commercial HVAC Technician, you will repair, maintain, and replace all HVAC equipment for the benefit of our customers. This position is full time with benefits. Responsibilities • Install, repair, and replace various HVAC systems sometimes in confined or high places, • Provide world-class customer service to our customers on a daily basis, • Complete paperwork in a timely and efficient manner, • Maintain clean work area, • Work closely with all other workers and supervisors while maintaining a polite, professional attitude, • Arrive on time to all jobs ready to work, • Attend company meetings as necessary, • Adhere to all safety and handbook policies Qualifications • Possess a RI or MA Journeyman License - Up to $10K Sign on Bonus! For a limited time, • Prior Commercial service experience, • Excellent customer service and communication skills, • Strong organizational skills, • Must be able to work on-call and weekend hours Benefits • Medical, Dental, and Vision Insurance, • 401K Plan with Company Match, • Holiday Pay, • Long Term Disability, • Company Paid Life Insurance, • Flexible Spending Account, • Great Company Culture, • Company iPhone & iPad, • Company Provided Vehicle with Fuel Package Sign On Bonus • Must have a RI, MA or CT Journeyman or Master license to qualify for the Sign On Bonus - Limited time sign on bonus of $10K Additional Perks • Fitted and Customized Company Uniforms, • Continuous and extensive training and development GEM is an Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.

Job Description Dome Construction Company is seeking an experienced Commercial Roofer to join our growing team. We have been serving Rhode Island and Southern Massachusetts since 1959 and specialize in commercial roofing, service repairs, maintenance, and roof replacement projects. Qualifications • Minimum 3 years of commercial roofing experience, • Knowledge of and experience working with all major commercial roofing systems, including:, • EPDM, • TPO, • PVC, • Built-Up Roofing (BUR), • Modified Bitumen, • Slate and Shingle Roofing, • Ability to diagnose roof leaks and perform repairs independently, • Experience with roof tear-offs, installations, maintenance, and service work, • Valid driver's license, • Reliable transportation to and from work, • Ability to work safely at heights and in varying weather conditions, • Ability to lift 50+ pounds and perform physically demanding work, • OSHA 10 certification Responsibilities • Perform commercial roof installations, repairs, and maintenance, • Conduct roof inspections and identify deficiencies, • Troubleshoot and repair roof leaks, • Safely operate roofing tools and equipment, • Maintain a clean and safe jobsite, • Complete work in accordance with company safety standards and manufacturer specifications What We Offer • Competitive pay based on experience, • Overtime opportunities, • Year-round work, • Health benefits available, • Paid holidays and vacation, • Opportunities for advancement If you are an experienced commercial roofer looking to join a stable company with a strong reputation and a steady backlog of work, we encourage you to apply. Dome Construction Company, Inc. 174 Foundry Street Central Falls, RI 02863 Phone: (401) 723-2877

Job DescriptionLUMBER (PART-TIME) Overview:As an Army Plumber, you’ll be crucial in keeping the Army operating smoothly by installing, repairing, and making construction plans for new pipe systems and insulation. You’ll install and repair pipe systems, plumbing fixtures, vents, and insulation, and you’ll read, interpret, and make construction plans for new pipe systems. Job Duties: • Maintain heating systems, basic water supply, and water distribution systems., • Maintain pipe systems for wastewater., • Perform basic plumbing repair and maintenance., • Maintain plumbing fixtures, pipes, stacks, brackets, traps, vents, and insulation., • Create and read construction plans and drawings. Requirements:, • Be between the ages of 17– 40., • Be a U.S. Citizen or Permanent Resident., • Possess a High School Diploma or GED., • Submit to background and medical screening, • Receive a passing score on the ASVAB Training:Job training for a Plumber requires 10 weeks of Basic Combat Training and 7 weeks of Advanced Individual Training with on-the-job training with some classroom instruction. Some of the skills you’ll learn are: • Installation and repair of pipe systems, plumbing fixtures, boiler controls, and water purification and distillation systems., • Maintenance and repair of hydraulic and pneumatic systems. Helpful Skills: • Interest in math and shop mechanics., • Preference for physical work., • Ability to work with detailed plans. FUTURE CIVILIAN CAREERS The skills you learn will help prepare you for a career in a mechanical or plumbing contracting company. Key Healthcare Benefits:TRICARE Health Plan: As a member of the U.S. Army, you and your family can be covered under the TRICARE Health Plan – a top-tier healthcare program that provides medical, dental, vision, and prescription coverage. No-Cost Healthcare: Active-duty members receive medical and dental care at no cost. Your family can also receive healthcare services at military or civilian facilities through TRICARE at little or no cost. Comprehensive Dental Care: Receive annual dental check-ups, cleanings, and necessary treatments. Vision Coverage: Coverage includes routine eye examinations and potential discounts on eyewear or corrective surgery. Health & Wellness Programs: Engage in preventive health programs, counseling services, fitness resources, and more to ensure you remain in the best of health. Maternity and Paternity Benefits: Expectant mothers receive comprehensive prenatal, labor, and postnatal care. New parents are also entitled to maternity and paternity leave. Long-term Care: Access to resources and programs that assist with long-term health needs or disabilities. Mental Health Services: Prioritizing the mental well-being of our service members, the U.S. Army offers counseling, therapy, and other mental health resources. Specialized Medical Training: Depending on your role, you may receive specialized medical training, ensuring that you're equipped with the skills to treat and manage a variety of health situations. Why the U.S. Army:Professional Growth: Engage in continued learning, training, and career advancement opportunities. Diverse Opportunities: From combat medic specialists to medical officers, choose a role that fits your passion and expertise. Community: Join a tight-knit community that prioritizes camaraderie, service, and mutual support.

Job Description Machine Operator - 3rd Shift + Differential Schedule: Monday - Thursday 11:00 p.m. - 6:00 p.m. Friday - Saturday 11:00 p.m. - 8:30 a.m. POSITION SUMMARY Machine Operator will be responsible for performing on various machines within the production process. They are required to perform various tasks to set up, operate and monitor production. The Machine Operator will also be responsible for inspecting parts to specifications as necessary to maintain quality specifications. CORE FUNCTIONS · Operates machines to ensure continuous production at a constant rate of the correct product at high quality levels with minimal wasted time and materials throughout the entire shift. · Perform in-process inspections of parts throughout the manufacturing run and ensure they meet visual standards of acceptance. · Responsible for producing parts in the proper quantity as identified by the production schedule. · Perform necessary pre-operation activities to ensure proper equipment startup. · Perform operational procedures to ensure the quality of the product packaged. · Follow and commit to meet Key Performance Indicators (KPI’s) for safety, quality, production, efficiency, and service requirements. · Recognize defective materials for color, surface blemishes, finish, and dimensions. · Inspect the condition of molds and component parts for damage and wear. · Inspect machine, conveyer and tools in department and notify Lead that a maintenance repair form is needed, or replacement tools are required. · Keeping work cell, department, and fire-doors clear of trash and other obstructions that could hinder department performance/safety. · Maintain condition of work area to meet 5-S standards. · Communicate with team members and support teams. · Maintain professional attitude offering support to Leads, Supervisors and Manager. · Demonstrate flexibility and willingness to assist whenever and in whatever capacity needed to ensure continuous production at a constant rate of the correct product at high quality levels with minimal wasted time and materials throughout the entire shift. QUALIFICATIONS & REQUIREMENTS Education and Experience · High school diploma, GED, or equivalent experience is required. · Prior experience operating manufacturing, packaging, and process control equipment recommended. Skills, Abilities, and Knowledge · Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. COMPETENCIES · Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. · Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan. · Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. · Meets productivity standards; completes work in timely manner; Strives to increase productivity; Works quickly. · Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. · Balances team and individual responsibilities; Exhibits objectivity and openness to other views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone’s efforts to succeed. SUPERVISOR RESPONSIBILITIES · Individual Contributor: working team member with no oversight of others and no management responsibilities. PHYSICAL REQUIREMENTS · This position is subject to Medium Work: Exerting up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Physical Activities · This position is subject to the following physical activities: climbing, balancing, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, crawling, and repetitive motions. Visual Acuity · The worker is required to have close visual acuity to perform an activity such as preparing and analyzing data and figures; transcribing; viewing a computer terminal; expansive reading; visual inspection involving small defects, small parts and/or operation of machines (including inspection); using measurement devices; and/or assembly of fabrication of parts at distances close to the eyes. Working Conditions · The worker is subject to inside and outside environmental conditions, including heat, noise, vibration, and hazards from a production-based environment. Perks That Go the Extra Mile : At RealTruck, we take care of our people—because they drive our success. Enjoy great benefits like medical, dental, and vision coverage, company-paid life insurance and disability, and a 401(k) with company match (eligible the first of the month after you start). Need balance? We’ve got wellbeing days and parental leave. Want to grow? Take advantage of educational reimbursement. Plus, earn referral bonuses and score exclusive employee discounts on RealTruck products. Great benefits. Great people. Even better careers. What’s Next? Please take a moment to provide us with your resume and/or complete our online application. You will quickly receive an acknowledgment that you applied, and we will follow up with you again shortly. About Us: RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep®, Bronco® and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, RealTruck’s 6,000+ associates operate from 35+ facilities across four continents. RealTruck’s leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 1,000 patents and pending applications. The company’s omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships.

Job Description Machine Operator - 2nd Shift + Differential Schedule: Monday - Friday 2:30 p.m. - 11:00 p.m. POSITION SUMMARY Machine Operator will be responsible for performing on various machines within the production process. They are required to perform various tasks to set up, operate and monitor production. The Machine Operator will also be responsible for inspecting parts to specifications as necessary to maintain quality specifications. CORE FUNCTIONS · Operates machines to ensure continuous production at a constant rate of the correct product at high quality levels with minimal wasted time and materials throughout the entire shift. · Perform in-process inspections of parts throughout the manufacturing run and ensure they meet visual standards of acceptance. · Responsible for producing parts in the proper quantity as identified by the production schedule. · Perform necessary pre-operation activities to ensure proper equipment startup. · Perform operational procedures to ensure the quality of the product packaged. · Follow and commit to meet Key Performance Indicators (KPI’s) for safety, quality, production, efficiency, and service requirements. · Recognize defective materials for color, surface blemishes, finish, and dimensions. · Inspect the condition of molds and component parts for damage and wear. · Inspect machine, conveyer and tools in department and notify Lead that a maintenance repair form is needed, or replacement tools are required. · Keeping work cell, department, and fire-doors clear of trash and other obstructions that could hinder department performance/safety. · Maintain condition of work area to meet 5-S standards. · Communicate with team members and support teams. · Maintain professional attitude offering support to Leads, Supervisors and Manager. · Demonstrate flexibility and willingness to assist whenever and in whatever capacity needed to ensure continuous production at a constant rate of the correct product at high quality levels with minimal wasted time and materials throughout the entire shift. QUALIFICATIONS & REQUIREMENTS Education and Experience · High school diploma, GED, or equivalent experience is required. · Prior experience operating manufacturing, packaging, and process control equipment recommended. Skills, Abilities, and Knowledge · Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. COMPETENCIES · Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. · Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan. · Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. · Meets productivity standards; completes work in timely manner; Strives to increase productivity; Works quickly. · Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. · Balances team and individual responsibilities; Exhibits objectivity and openness to other views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone’s efforts to succeed. SUPERVISOR RESPONSIBILITIES · Individual Contributor: working team member with no oversight of others and no management responsibilities. PHYSICAL REQUIREMENTS · This position is subject to Medium Work: Exerting up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Physical Activities · This position is subject to the following physical activities: climbing, balancing, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, crawling, and repetitive motions. Visual Acuity · The worker is required to have close visual acuity to perform an activity such as preparing and analyzing data and figures; transcribing; viewing a computer terminal; expansive reading; visual inspection involving small defects, small parts and/or operation of machines (including inspection); using measurement devices; and/or assembly of fabrication of parts at distances close to the eyes. Working Conditions · The worker is subject to inside and outside environmental conditions, including heat, noise, vibration, and hazards from a production-based environment. Perks That Go the Extra Mile : At RealTruck, we take care of our people—because they drive our success. Enjoy great benefits like medical, dental, and vision coverage, company-paid life insurance and disability, and a 401(k) with company match (eligible the first of the month after you start). Need balance? We’ve got wellbeing days and parental leave. Want to grow? Take advantage of educational reimbursement. Plus, earn referral bonuses and score exclusive employee discounts on RealTruck products. Great benefits. Great people. Even better careers. What’s Next? Please take a moment to provide us with your resume and/or complete our online application. You will quickly receive an acknowledgment that you applied, and we will follow up with you again shortly. About Us: RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep®, Bronco® and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, RealTruck’s 6,000+ associates operate from 35+ facilities across four continents. RealTruck’s leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 1,000 patents and pending applications. The company’s omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships.

The HVAC & HVAC Controls Technician is responsible for the installation, operation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning, and building automation/control systems. This role supports the safe, efficient, and reliable operation of HVAC systems across assigned facilities, with a strong emphasis on controls, energy efficiency, and occupant comfort. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit _ Pay: $42.87 an hour The pay listed is the pay range for this position. Any specific offer will vary based on the successful applicant’s education, experience, skills, abilities, geographic location, and alignment with market data. A good job for someone just entering the workforce or returning to the workforce with limited experience and education. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 91E, 91C, EM, HT, MK, DC, 1161, 1341, 3E1X1 Essential Duties and Responsibilities HVAC Systems • Install, inspect, maintain, and repair HVAC equipment including boilers, chillers, air handling units, rooftop units, VAV systems, heat pumps, exhaust systems, and associated mechanical components., • Perform preventive and corrective maintenance in accordance with manufacturer specifications and industry standards., • Diagnose system failures and performance issues using test instruments, schematics, and building documentation., • Respond to emergency service calls and after-hours issues as required., • Ensure HVAC systems operate in compliance with applicable codes, regulations, and safety standards. HVAC Controls / Building Automation Systems (BAS) • Install, program, commission, troubleshoot, and maintain HVAC control systems (e.g., Johnson Controls, Siemens, Honeywell, Trane, or similar BAS platforms)., • Calibrate sensors, actuators, valves, dampers, and control devices., • Modify control sequences and setpoints to optimize system performance, energy efficiency, and occupant comfort., • Monitor building systems via BAS interfaces and trend data to identify inefficiencies or faults., • Assist with system upgrades, retrofits, and integration of new control technologies. General Responsibilities • Read and interpret blueprints, control drawings, wiring diagrams, and technical manuals., • Coordinate work with contractors, vendors, and other trades as needed., • Maintain accurate records of work performed, including service reports and maintenance logs., • Support energy management initiatives and sustainability goals., • Follow all safety procedures, including lockout/tagout, PPE requirements, and OSHA standards., • Provide technical guidance to other maintenance staff as needed. Qualifications Required • High school diploma or equivalent., • Minimum of [X] years of experience in HVAC service and maintenance., • Demonstrated experience with HVAC control systems and BAS., • Valid driver’s license., • Ability to work independently and prioritize multiple tasks. Preferred • EPA Universal Refrigerant Certification., • HVAC journeyman license or equivalent (where applicable)., • Manufacturer‑specific controls training or certification., • Experience in institutional, educational, healthcare, or large commercial facilities., • Knowledge of energy management and building optimization practices. Knowledge, Skills, and Abilities • Strong understanding of HVAC theory, controls logic, and mechanical systems., • Proficiency with electrical troubleshooting and low‑voltage control systems., • Ability to use diagnostic tools, meters, laptops, and BAS software., • Strong problem‑solving and analytical skills., • Effective communication and documentation skills., • Ability to work in confined spaces, on ladders, and lift up to [X] lbs. Work Environment • Work performed in mechanical rooms, rooftops, occupied buildings, and outdoor environments., • May require on‑call availability, nights, weekends, or emergency response., • Exposure to heat, cold, noise, and mechanical equipment. About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

The individual selected for this role will be expected to work at Store #4351, located at: 77 Walnut Street, Warwick, RI 02886.This position is responsible for spray equipment (e.g. airless, conventional, electrostatic, pressure washers) at the store or at customers’ job sites. This includes performing necessary repairs, providing training on equipment, and maintaining inventory as required. Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s customers, staff, employees, vendors, contractors, and the general public. At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 – Online Application Find the role(s) that interest you on our Careers page: _ Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 – Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You’ll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 – In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute—it matters to us. A general description of benefits offered can be found at _. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. • Support the sales efforts at a Sherwin-Williams paint store, servicing wholesale and retail customers., • Perform repairs on all types of spray equipment (e.g. airless, conventional, electrostatic, pressure washers.) at the store or at customers’ job sites, • Conduct hydraulic and warranty repairs, • Rebuild pumps, • Repair branch tinting and mixing equipment, • Educate other employees and customers on spray equipment, • Maintain an inventory of spray partsMinimum Requirements:, • Must be at least eighteen (18) years of age, • Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future, • Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion, • Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodationPreferred Qualifications:, • Have a valid, unrestricted Driver’s License, • Have at least a High School diploma or GED, • Have prior work experience repairing spray and/or hydraulic pumps and equipment, • Have at least one (1) year of experience working in a delivery, retail, or customer service position, • Have previous work experience selling paint and paint-related products, • Have previous work experience operating tinting and mixing equipment, • Ability to read, write, comprehend, and communicate in more than one language, • Ability to read, write, comprehend, and communicate in Spanish #SHWSales

Job Description Not getting what you need from your current job? Ready for unlimited income potential and the freedom to run your own territory? Join Hi-Line’s Outside Sales Team Hi-Line is a third-generation, family-owned company that has been debt-free since 1959. We provide high-quality inventory solutions to businesses nationwide - and we’re growing. We’re looking for driven individuals who want more control over their income, schedule, and career path. What You’ll Get: • Uncapped Commissions – Your effort determines your income, • Work-Life Balance – Flexibility to build your own schedule, • Your Own Territory – Operate from a fully stocked Mobile Store, • Proven Training & Support – We set you up to succeed, • American-Made Products – Sell quality you can stand behind Experience: Sales or industry experience is helpful - but not required. Many of our top performers came from completely different backgrounds. If you’re motivated, coachable, and competitive, you can succeed here. Take the Next Step If you’re ready to take control of your career and income, let’s talk. careers@hi-line.com 469.799.3135 Equal Opportunity Statement: At Hi-Line, Inc, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all qualified applicants and our associates without regard to race, color, religion, age, sex, national origin, disability, protected veteran status, sexual orientation, gender identity/expression or any category protected by applicable law. Powered by JazzHR s3FkUChQ6f Company DescriptionHi-Line has been keeping America’s industry running strong for over 60 years. Headquartered in Dallas, Texas, we have established ourselves as one of America’s leading providers to the Industrial Maintenance and Repair Industry. We provide timely access to over 30,000 quality industrial MRO products (most of which are made in the U.S.A.) through our nationwide network of Industrial Sales Managers. We bring both the quality product and the quality service to our clients. Our wide array of products is complemented by our unparalleled inventory management services. We provide on-site product and inventory management to our clients and our highly-trained Industrial Sales Managers are very much a part of the daily operations at the businesses that they visit. We’re there to keep our customers’ business moving, 24/7/365.Hi-Line has been keeping America’s industry running strong for over 60 years. Headquartered in Dallas, Texas, we have established ourselves as one of America’s leading providers to the Industrial Maintenance and Repair Industry. We provide timely access to over 30,000 quality industrial MRO products (most of which are made in the U.S.A.) through our nationwide network of Industrial Sales Managers. We bring both the quality product and the quality service to our clients.\r\n\r\nOur wide array of products is complemented by our unparalleled inventory management services. We provide on-site product and inventory management to our clients and our highly-trained Industrial Sales Managers are very much a part of the daily operations at the businesses that they visit. We’re there to keep our customers’ business moving, 24/7/365.

Job Description Immediate openings for HVAC/R technicians Minimum of 3yrs independent experience in service/repair/installations RI or Ma refrigeration license is required