Trabajos ironworker en Phoenix, ArizonaCrear alertas

Job DescriptionNot a traveling position.We are looking for a highly skilled Ironworker to join our growing team. This candidate must also have a history of maintaining safe work practices and take pride in a safe work environment. At EZARC, we challenge our employees to step out of their comfort zone, learn new skills, progress in their careers, and work together as a team to convert hard work into success.Responsibilities include, but are not limited to:Read and interpret steel erection and shop drawings.Create layouts on concrete, existing structures, and materials to be fabricated. Confirm these layouts according to the drawings.Shakeout steel in order of erection sequence per drawings.Prepare hardware needed for materials to be erected.Determine proper rigging slings and hardware according to the weight of the load.Ensure that all rigging tools are safe and reliable before each use.Establish effective communication with the crane operator and crew members using radio or hand signals.Detect faulty operation of equipment, tools, or defective material and notify Foreman.Fabricate metal parts such as metal frames, columns, beams or girders, and pipe according to blueprints or revisions from Supervisor.Work alongside a crew to perform the erection of structural steel members.Maintain a high standard of safety culture.Exhibit efficient leadership skills to perform tasks on tight deadlines.Signal or verbally direct workers engaged in hoisting and moving loads, to ensure the safety of workers and materials.Attach loads to rigging to provide support or prepare them for moving, using push sticks or tag lines.Select rigging gear such as cables, nylon straps, pulleys, and winches, according to the weight of the load.Control movement of heavy equipment or loads through narrow openings or confined spaces, using chain falls, come-along, and other equipment.Dismantle and store rigging equipment after each use.Clamp, hold, tack-weld, heat-bend, grind, or bolt parts to obtain required configurations and positions for welding.Recognize, set up, and operate hand and power tools common to the welding trade.Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.Mark or tag material with the proper job numbers, piece marks, and other identifying marks as required.Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.Gouge metals, using the air-arc gouging process.Preheat workpieces before welding or bending, using torches or wed burners.Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members.Assemble hoisting equipment or riggings, such as cables, pulleys, or hooks, to move heavy equipment or materials.Erect metal or precast concrete components for structures, such as buildings, bridges, dams, towers, storage tanks, fences, or highway guard rails.Qualifications:Must be willing to relocate to Utah.4+ years of experience as an Ironworker.Experience with tight deadlines and strict safety requirements.Ability to operate a telescopic forklift, boom lift, and scissor lift.Ability to weld 3G and 4G with different welding applications.Any OSHA/MSHA or other safety certifications are a plus.Ability to work with minimal supervision.Takes pride in accomplishing quality work.Great communication skills, especially with the crane or forklift operator using hand signals or radio.Discretion in phone usage.Comfortable with working at heights.Experience in bull-rigging is a plus.Heavy industrial experience in shutdowns or turnaround is a plus.WHY EZARC?Innovate and Create: For nearly 30 years EZARC has been providing quality fabrication and manufacturing solutions. We believe in challenging our employees to step outside the box and provide innovative solutions.Growth Opportunities: In 2021, EZARC was recognized as Utah's 15th fastest-growing company. This growth offers great professional and financial opportunities for every one of our employees.Make an Impact: We create value for our customers by delivering out-of-the-box solutions. Our pace of work fosters a fast learning environment where you can stretch yourself and make an impact.Teamwork: EZARC fosters a culture where employees share their ideas, engage with one another, and implement improvements. Here you will work with diverse individuals, explore new ways of thinking, and expand your capabilities.Benefits:401(k) Plan With Matching.Paid Time Off.Paid Holidays.Medical.Dental.Vision.Short-Term Disability.Long-Term Disability.Life Insurance.Employee Assistance Program.Referral Program.Health Savings Account.Professional Development Assistance.

Job DescriptionNot a traveling position. We are looking for a highly skilled Ironworker to join our growing team. This candidate must also have a history of maintaining safe work practices and take pride in a safe work environment. At EZARC, we challenge our employees to step out of their comfort zone, learn new skills, progress in their careers, and work together as a team to convert hard work into success. Responsibilities include, but are not limited to: • Read and interpret steel erection and shop drawings., • Create layouts on concrete, existing structures, and materials to be fabricated. Confirm these layouts according to the drawings., • Shakeout steel in order of erection sequence per drawings., • Prepare hardware needed for materials to be erected., • Determine proper rigging slings and hardware according to the weight of the load., • Ensure that all rigging tools are safe and reliable before each use., • Establish effective communication with the crane operator and crew members using radio or hand signals., • Detect faulty operation of equipment, tools, or defective material and notify Foreman., • Fabricate metal parts such as metal frames, columns, beams or girders, and pipe according to blueprints or revisions from Supervisor., • Work alongside a crew to perform the erection of structural steel members., • Maintain a high standard of safety culture., • Exhibit efficient leadership skills to perform tasks on tight deadlines., • Signal or verbally direct workers engaged in hoisting and moving loads, to ensure the safety of workers and materials., • Attach loads to rigging to provide support or prepare them for moving, using push sticks or tag lines., • Select rigging gear such as cables, nylon straps, pulleys, and winches, according to the weight of the load., • Control movement of heavy equipment or loads through narrow openings or confined spaces, using chain falls, come-along, and other equipment., • Dismantle and store rigging equipment after each use., • Clamp, hold, tack-weld, heat-bend, grind, or bolt parts to obtain required configurations and positions for welding., • Recognize, set up, and operate hand and power tools common to the welding trade., • Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques., • Mark or tag material with the proper job numbers, piece marks, and other identifying marks as required., • Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter., • Clean or degrease parts, using wire brushes, portable grinders, or chemical baths., • Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools., • Gouge metals, using the air-arc gouging process., • Preheat workpieces before welding or bending, using torches or wed burners., • Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors., • Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members., • Assemble hoisting equipment or riggings, such as cables, pulleys, or hooks, to move heavy equipment or materials., • Erect metal or precast concrete components for structures, such as buildings, bridges, dams, towers, storage tanks, fences, or highway guard rails. Qualifications: • Must be willing to relocate to Utah., • 4+ years of experience as an Ironworker., • Experience with tight deadlines and strict safety requirements., • Ability to operate a telescopic forklift, boom lift, and scissor lift., • Ability to weld 3G and 4G with different welding applications., • Any OSHA/MSHA or other safety certifications are a plus., • Ability to work with minimal supervision., • Takes pride in accomplishing quality work., • Great communication skills, especially with the crane or forklift operator using hand signals or radio., • Discretion in phone usage., • Comfortable with working at heights., • Experience in bull-rigging is a plus., • Heavy industrial experience in shutdowns or turnaround is a plus. WHY EZARC? Innovate and Create: For nearly 30 years EZARC has been providing quality fabrication and manufacturing solutions. We believe in challenging our employees to step outside the box and provide innovative solutions. Growth Opportunities: In 2021, EZARC was recognized as Utah's 15th fastest-growing company. This growth offers great professional and financial opportunities for every one of our employees. Make an Impact: We create value for our customers by delivering out-of-the-box solutions. Our pace of work fosters a fast learning environment where you can stretch yourself and make an impact. Teamwork: EZARC fosters a culture where employees share their ideas, engage with one another, and implement improvements. Here you will work with diverse individuals, explore new ways of thinking, and expand your capabilities. Benefits: • 401(k) Plan With Matching., • Paid Time Off., • Paid Holidays., • Medical., • Dental., • Vision., • Short-Term Disability., • Long-Term Disability., • Life Insurance., • Employee Assistance Program., • Referral Program., • Health Savings Account., • Professional Development Assistance.

Job DescriptionJourneyman/Ironworker Location: Phoenix Area/Maricopa County | Schedule: Full Time Who We Are At All Things Metal Industries, we don’t just build steel—we build people, relationships, and lasting careers. We’re proud to be a family-owned company that’s been recognized multiple times as one of Arizona’s Best Places to Work, and we take that seriously. Our culture is fast-paced and driven, but also supportive and humble. We value teammates who are hungry to learn, smart in how they work, and humble enough to grow with others. This isn’t a place for short-term gigs—you’ll find steady work, opportunities to advance, and a team that truly has your back. Whether it’s in the shop, the field, or the office, we believe in promoting from within, investing in our people, and helping each other reach the next level. If you’re looking for a long-term home where hard work meets big opportunity, All Things Metal is the place to be. ATM Steel ATM Steel, formerly All Things Metal, is our structural steel fabrication and erection team. We focus on large-scale projects in the Phoenix area, bringing experience, capacity, and precision to every job. Our name reflects the size and scale of our work while staying true to the iron-strong relationships we’ve built over 22 years. Role Overview The Journeyman Ironworker plays a critical role in the successful erection of structural steel and miscellaneous metals on commercial construction projects throughout Arizona. This position is responsible for safely and accurately raising, positioning, aligning, and connecting structural steel members while maintaining compliance with OSHA and AISC standards. The ideal candidate is a skilled tradesperson who takes pride in quality workmanship, can work independently with minimal supervision, and is capable of mentoring apprentices while leading small crews. Key Responsibilities • Erect structural steel and miscellaneous metal assemblies in accordance with project plans, specifications, OSHA regulations, and AISC standards., • Raise, position, align, connect, and secure beams, columns, stairs, guardrails, grab rails, and other structural components., • Read and interpret erection drawings, shop drawings, and construction documents., • Perform structural steel bolt-up, field fabrication, layout, and welding activities., • Utilize gridlines, benchmarks, and layout tools to ensure accurate installation and alignment., • Install and maintain rigging systems while safely signaling crane operators during steel erection activities., • Operate forklifts, aerial work platforms, and powered hand tools in accordance with training and certifications., • Lead small crews and provide mentorship and guidance to apprentice ironworkers., • Maintain welding certifications and ensure all work meets company quality standards., • Enforce safety procedures, PPE requirements, and company policies at all times., • Successfully complete assigned tasks with minimal direction while maintaining productivity and workmanship standards., • Support positive relationships with customers, contractors, and fellow team members. Qualifications Required • Journeyman-level ironworking experience in commercial construction., • Experience with rigging, signaling, and structural steel erection., • Ability to weld 3G and 4G SMAW., • Ability to read and interpret erection drawings and shop drawings., • Experience installing stairs, guardrails, and grab rails., • Experience with structural steel layout, plumbing, sequencing, and connection methods., • Ability to fabricate structural steel components in the field., • Comfortable working at heights., • Ability to lead small crews and mentor apprentices., • Working knowledge of fall protection systems and construction safety requirements., • Professional working proficiency in English.Preferred, • OSHA 10 Certification., • Current welding certifications., • Certifications for forklifts and aerial work platforms. Skills & Abilities • Strong understanding of commercial steel construction practices., • Ability to work safely in a fast-paced environment while maintaining attention to detail., • Excellent problem-solving and decision-making skills in the field., • Strong leadership and communication skills., • Ability to prioritize tasks and adapt to changing jobsite conditions., • Commitment to quality workmanship and continuous improvement., • Dependable, team-oriented, and self-motivated., • Ability to maintain a high standard of safety, professionalism, and accountability. All work is local to Arizona — no travel required. Schedule Start times between 5am - 7am depending on the job site. Monday - Thursday Full time Compensation & Benefits • Salary: Dependent on experience! $23+, • Accepting applications from apprentice to journeyman level, • Steady, long-term work in a supportive environment, • First-time homebuyer program with $500 bonus and optional realtor/mortgage support, • Dave Ramsey SmartDollar financial education resources, • Full benefits including medical, dental, vision, PTO, and sick time, • 401(k) with company match and profit-sharing contributions, • Family-friendly events and team-building activities, • Birthday and work anniversary recognition, • Cash bonuses for production roles and internal growth opportunities #priority, #hiring Powered by JazzHR tmXR9sOUam

Job Description MMI is an industrial and steel company is based in Mesa, Arizona. MMI has been in business since 1974 and continues to grow each year. This position will be working on our Amkor Project in Peoria, AZ. MMI is looking to hire experienced ironworkers who have at least 3 years of experience in ironworking and welding. Ironworkers are involved in raising, positioning, aligning, and connecting steel girders, columns, beams, and other structural members to form completed structures or structural frameworks. Must be able to pass a drug test. Pay depends on experience. Benefits: • Health insurance, Dental, Vision, Life, • 401(k), • Holiday pay, • Paid time off, • Profit sharing Responsibilities: • Must be able to read, understand and interpret blueprints and specifications, • Layout, bolt up, connecting and erecting structural steel, • Installation of steel stairs and railings, fences, gates and other misc. metals, • Follow company and jobsite safety guidelines, procedures and policies, • Knowledge and use of crane hoisting, rigging and signaling (certifications a plus), • Welding, torch cutting, arc gouging, grinding, • Must be certified or able to pass a 3G and 4G weld test (SMAW and FCAW), • Operate equipment (scissor lifts, boom lifts, reach forklifts, warehouse forklifts etc.), • Able to work overtime, nights, and weekends as required by the workload, • Have own tools Ironworkers must be physically able to: • Lift and carry objects weighing more than 50 lbs., • Stoop, kneel, crawl, lay, bend, squat, stand and walk for long periods of time, • Climb and maintain body balance on ladders, scaffolding or high structures (may exceed 100ft), • Work outdoors in all weather conditions Why should you apply? MMI has strong reason for existing. Our Purpose is “To improve the lives of MMI Employees, Customers, & Vendors.” We live our Core Values every day • Happy – Choose to be happy and treat others with respect., • Hungry – Seek learning and create opportunities. Adapt to change., • Hardworking – Be ambitious and obsessed with quality., • Honorable – Demonstrate humility and integrity and put the team first. If you appreciate our purpose and embrace our core values stated above, we invite you to apply.

Job Description Ironworker / Structural Steel Welder We are seeking an experienced Ironworker / Structural Steel Welder to join our team. Candidates must have current welding certifications and hands-on experience in both shop fabrication and field installation environments. Requirements • Current/up-to-date welding certifications required, • Proficient in 7018 stick welding, • Shop and field experience required, • Ability to erect structural steel safely and efficiently, • Experience using ladders, boom lifts, and scissor lifts, • Ability to read and interpret blueprints and structural drawings, • Strong attention to detail and workmanship, • Must provide own tools, • Reliable transportation and strong work ethic preferred Responsibilities • Perform structural steel welding and erection, • Read and follow blueprints and fabrication drawings, • Operate lifts and work safely at heights, • Assist with fabrication, fitting, and installation of steel components, • Maintain quality standards and jobsite safety practices Pay based on experience and certifications.

Job Description Welder/Fabricator Fire Training Structures has been a leading-edge manufacturer of quality fire training simulators both domestically and internationally. As we continue to expand, we are looking for an experienced Welder to join our dedicated FTS team. You will be responsible for welding and fabricating storage containers and other structures in our shop and on job sites. If you are someone who enjoys solving problems, working efficiently, and taking pride in delivering quality work, this is the job for you! Key Responsibilities: • Perform MIG (GMAW) welding to fabricate and repair storage containers and related structures., • Read and interpret blueprints, measurements, work orders, and fabrication instructions., • Operate welding equipment, fabrication tools, power tools, and operational machinery safely and efficiently., • Repair structural damage, install modifications, and complete custom fabrication projects as assigned., • Inspect completed work to ensure quality standards, structural integrity, and operational functionality., • Ensure all welds meet quality standards and pass AWS 3G and 4G weld tests., • Maintain clean and organized fabrication, welding, and operational work areas., • Follow company safety procedures, OSHA standards, and operational guidelines., • Coordinate with shop personnel, service technicians, and management regarding fabrication priorities and operational needs., • Assist with inventory usage, material organization, and equipment maintenance., • Report equipment concerns, material shortages, and operational issues to management., • Perform additional duties assigned by management. Requirements: • Prior experience with MIG (GMAW) welding., • Ability to pass AWS 3G and 4G weld tests., • Knowledge and experience with basic shop equipment (ironworker, brake, grinder, drill press, etc.)., • Clean record and valid driver’s license with reliable transportation., • Ability to lift to 50 lbs., • Strong problem-solving skills and the ability to work independently with minimal supervision., • Willingness to work both in the shop and at job sites, including outdoor work during the summer months., • Professional demeanor and the ability to collaborate effectively with teammates. Benefits: • Competitive salary and growth opportunities., • Comprehensive benefits package including medical, dental, vision, and life insurance., • 401(k), • Paid time off, Sick time, and paid holidays annually. Job Type: Full-time, Onsite. Not a Remote Position Main Office Location: 1005 N 50th St, Phoenix, AZ 85008 Equal Opportunity Employer: Fire Training Structure LLC is an equal opportunity employer and prohibits discrimination and harassment of any kind. We are committed to providing equal employment opportunities to all employees and applicants. We encourage and love to hire veterans, military experience welcome! If you’re ready to join a winning team and make an impact, apply today! We look forward to welcoming you aboard.

Job DescriptionJob Overview:We are looking for highly motivated individuals to enter EZARC's Apprenticeship Program to become certified Journeyman Ironworkers (JIW). The job description is as follows:Duties and Responsibilities:Follow EZARC apprenticeship program to become Journeyman Ironworker.Learn how to read and interpret construction drawings.Assist with layout & erection of Structural steel; ex. iron or steel girders, columns, connections, tube steel, Unistrut and other construction materials to form buildings, canopies, staircases and other structures.Work with Journeyman Ironworker (JIW) to verify material, measurements, and specifications prior to starting work.Work alongside a crew to perform the erection of structural steel members.Assist with rigging and hoisting of steel members, loading or unloading of construction materials.Learn cutting, welding, fitting, bolting, fastening of steel members, install decking, "high and tight" work.Work at heights using fall protection equipment.Learn to utilize aerial lifts and other equipment, power tools, etc.Maintain high standard of quality; learn to perform quality checks on own work and that of others.Maintain a high standard of safety culture.Learn to problem solve.Applicant will be trained and expected to pass AWS D1.1 and/or D1.3 welding certification test once deemed ready by supervisor.*Applicant will be required to take min. OSHA 10 certification after probationary period. Employee will be expected to cover all fees for testing not passed.Qualifications:Previous education and/or experience in structural welding, manufacturing, or other related fields, preferred.Familiarity with steel fabrication & welding tools and procedures, preferred.Familiarity with shop drawings, engineering blueprints and schematics, preferred.Any OSHA/Safety certifications are a plus.Reliable transportation to/from work.Must be able to pass criminal background check and drug screening.Tool Requirements: Basic ironworking hand tools including spud crescent, sleeverbar, bull pin, sledgehammer, speed square, min 25' tape measure, hard spuds typ. size, bolt bags, scabbard, etc. must be supplied by the applicant.Personal tool boxes, gang boxes, power tools, and fall protection harnesses permitted with waiverWorking Conditions:Shift times vary based on season and available sunlight throughout the year (for example winter beginning 6:00 AM ending 4:30 PM and summer beginning 5:00 AM ending 3:30 PM)Outdoors working environment; adverse weather and other adverse shop and field circumstancesPhysical Requirements:Work up to a 12-hour shift conducting physical work in varying temperatures and outside conditions.Will climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds (with appropriate training).Will lift, push or pull objects up to 70 poundsRequired to use hands to grasp, lift, handle, carry or feel objectsMust be able to comply with all safety standards and proceduresAbility to reach above shoulder heights and below the waistAbility to stoop, kneel, or bendAbility to wear personal protective equipment is required (including but not limited to; safety-toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)Move in and around confined, cluttered and uneven areas

Job DescriptionWelder/Fabricator Be part of the team that builds the steel that keeps Phoenix industry moving—structural frames, plant-relocation rigging, and industrial piping supports. As Welder/Fabricator you turn drawings into finished assemblies that leave our shop and go to work. In a crew of fewer than ten, every clean bead and square fit shows up on the next job. Performance Objectives • Fabricate and weld structural steel assemblies to AWS D1.1 and project drawings so they pass first-article inspection and ship on the promised date., • Cut, fit, and join members (SMAW, GMAW, FCAW) with rework under 2 percent while keeping daily output on the shop schedule., • Produce custom brackets, skids, and pipe supports needed for machinery moves and plant piping so field crews can install without delay., • Read shop drawings and cut lists, lay out material, and sequence work so the next person never waits for parts., • Keep welders, plasma, ironworker, and crane in daily working order and log zero lost-time incidents., • Help load and stage finished pieces so trucks leave on time and the shop floor stays clear for the next job.Environment & Resources You work in our Phoenix fabrication shop reporting to the owner/shop lead. The crew is small—fabricators, movers, and one or two helpers—so you will see every job from raw stock to loaded truck. Tools include industrial MIG/Stick/Flux-core machines, plasma cutter, ironworker, overhead crane, and a full set of layout and fitting gear. Consumables and PPE are supplied; you bring your own hand tools and a reliable way to get to work. Essential Qualifications • Three-plus years structural steel welding and fitting (shop or field) with current or quickly obtainable AWS D1.1 certification., • Ability to interpret shop drawings, cut lists, and weld symbols and turn them into square, dimensionally accurate assemblies., • Physical capacity to lift 50+ lb repeatedly, work in Arizona heat, and stand or climb for a full shift., • Proven safety record and willingness to stop work rather than take a shortcut., • Reliable transportation and a track record of showing up ready to produce.Why This Role, • Variety: structural frames one day, custom plant-move steel and pipe supports the next—no two weeks look the same., • Visibility: your work leaves the shop and gets installed; you can drive by the finished job., • Impact: in a company of 1–10 people your output, quality, and attitude move the entire business., • Growth market: Phoenix industrial and construction work is expanding; we need people who can keep pace. If you take pride in steel that is square, strong, and ready to install, send your resume plus two or three photos of recent structural work. We hire for what you can do, not just what you have done.

Job Description Overview Tradesmen International is immediately hiring experienced Ironworker's for projects located in or around Phoenix, AZ. This is a first shift opportunity and the pay rate is $20–$25/hour based on experience and skill level. If you are a Ironworker and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: • Erecting structural steel columns and beams, • Bolting-up and alignment of steel components, • Working safely at heights using proper fall protection Requirements: • Must have PPE including hard hat, safety vest, safety glasses, gloves and steel toe or composite boots, • Must have standard worker tools including lifeline, beamer, level, spud wrenches, • Must be comfortable working from heights Responsibilities (Any Info you can find in the Intake Box—if no requirements in the intake, blank is acceptable) • Minimum of 3 years in the trade field, • Must own basic Hand Tools, • Must wear proper PPE Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job DescriptionEZARC, Inc. is a leading specialty contractor serving the structural steel needs of the commercial and industrial construction sectors. With projects across the Western United States and a reputation for safety and precision, we are expanding our field leadership team in Phoenix. We are seeking a General Foreman with a background as a journeyman Ironworker to oversee field operations across multiple crews and phases of structural steel erection.Position SummaryThe General Foreman is a senior field leader responsible for driving jobsite safety, field production results, and crew performance. This individual will coordinate day-to-day operations, manage multiple foremen and crews, and ensure all activities align with the project's budget, schedule, and quality requirements. The ideal candidate brings a balance of field expertise, leadership, and discipline in managing resources and timelines.Key ResponsibilitiesOwn and enforce all aspects of jobsite safety, ensuring full compliance with OSHA and EZARC standardsLead and be accountable for achieving daily and weekly production targets while maintaining quality and safetySupervise and support multiple Working Foremen and Ironworker crews during all phases of structural steel erectionCoordinate daily activities with the Project Superintendent, including manpower, equipment, and material logisticsMonitor productivity, work sequencing, and scheduling to drive jobsite efficiencyReview project drawings, field details, and changes to ensure correct steel installationProactively identify and resolve constructability and coordination issuesConduct safety meetings, toolbox talks, and job hazard analysesTrack and report performance metrics; ensure timecards and reports are accurate and timelyMentor and develop field leadership, promoting a culture of accountability and pride in craftsmanshipAct as a primary field liaison between crews, project management, and other tradesQualificationsRequired:Journeyman Ironworker with 8–10 years of experience in structural steel, including 3–5 years in a supervisory roleDemonstrated success in leading safe, productive crews on large-scale steel projectsDeep knowledge of steel erection techniques, rigging, crane operations, layout, and connectionsOSHA 30 certification requiredStrong ability to read and interpret structural drawings and specificationsExcellent communication, leadership, and conflict resolution skillsValid driver's license and reliable transportationPreferred:NCCCO or similar rigging/signalperson certificationExperience with commercial, industrial, or data center steel structuresWork EnvironmentField-based position on active construction sitesMust be comfortable with heights, steel structures, and changing site conditionsDaily use of PPE; physical activities include walking, climbing, lifting, and supervising ironwork tasks

Tradesmen International - - Responsibilities: Erect structural steel columns and beams; Bolting-up and alignment of steel components; Working safely at heights with fall protection; Maintain productivity and quality on site.

Responsible for the layout, installation, assembly, and steel erection components in accordance with blueprint plans, specifications, codes, and industry standards.Skilled 5+ years of experience with structural and miscellaneous erection as well as rigging and connecting, detail and layout.Primary

This is a broad representation of the type of tasks and requirements required of Ironworkers at JE Dunn. Role Summary: The Ironworker 3 will be responsible for performing increasingly complex structural steel and other miscellaneous tasks on a variety of construction projects including new construct

Constructs, erects, installs, and repairs structures and fixtures associated with concrete steel reinforcing using Ironworker's hand tools and power tools while conforming to local building codes.

We're looking for Ironworkers experienced in heavy commercial/industrial construction.

Any resume submitted to any employee of JE Dunn Construction without a prior written search agreement will be considered unsolicited and the property of JE Dunn Construction Company. Role Summary The Trade Foreman 2 will support construction activities for routine and non-routine projects and ensure

Trillium Construction is seeking a Journeyman Ironworker near Scottsdale, AZ for the ground-up construction of a new Flexjet private aviation terminal and aircraft maintenance hangar. This role requires a well-rounded structural ironworker capable of reading blueprints, working safely at heights, an

Responsible for the layout, installation, assembly, and steel erection components in accordance with blueprint plans, specifications, codes, and industry standards.Skilled – 5+ years of experience with structural and miscellaneous erection as well as rigging and connecting, detail and layout.PRIMA

Any resume submitted to any employee of JE Dunn Construction without a prior written search agreement will be considered unsolicited and the property of JE Dunn Construction Company. The Trade Foreman 2 will support construction activities for routine and non-routine projects and ensure that the pla

The Journeyman Ironworker plays a critical role in the successful erection of structural steel and miscellaneous metals on commercial construction projects throughout Arizona. Lead small crews and provide mentorship and guidance to apprentice ironworkers.

Trillium Construction is seeking apprentice ironworkers near Scottsdale, AZ to assist in the construction of a new Flexjet private aviation terminal and aircraft maintenance hangar.

Monday - Friday (Potential for full time ), first shift, 6:00-3:00 PM.We are thrilled to announce a new Welder opportunity! PrideStaff, a nationally recognized staffing company, has been given the chance to assist a top employer.Are you currently working but looking to explore new Welder (Metal Fa

Home Depot - - Responsibilities: Load and unload trucks, move material within the facility and from the loading platform; Carry, push, roll or operate hand trucks, forklifts, hoists, motorized conveyors; Safely operate forklifts or other machinery to complete tasks; Sort, staging, and transporting

Cigna - 2040 West Rio Salado Parkway - Responsibilities: Unload trucks and process items safely according to receipt priority and purchase orders; Operate material handling equipment including forklifts and pallet jacks; Verify receipts against packing lists and enter data into the inventory system;

Labcorp - - Responsibilities: Place orders for supplies from vendors via computer and telephone; Load and unload supplies from trucks and verify packing slips; Receive and process stock into inventory management system; Process orders from client offices and patient service centers via phone, fax a

Imperial Dade - 5502 West Buckeye Road - Responsibilities: Safely operate a 26' box truck with air brakes; Deliver items to the loading area; Unload trucks; Inspect the truck before and after trips; Locate materials on shelves in the warehouse.

PrideStaff - - Responsibilities: Assist customers and fulfill orders; Restock inventory in warehouse; Operate forklift to move pallets and stock; Maintain safety as a priority in warehouse operations; Read order forms and serial numbers to fulfill picks.

Responsibilities: Move and load/unload furniture and inventory safely up to 150 lbs with assistance; Use scanners and warehouse software to track and update inventory; Perform quality control tasks including inspection, labeling, and repackaging; Maintain a clean and safe work area following 5S prin

Lincare - - Responsibilities: Fulfill and ship customer orders; Operate forklift and other material handling equipment; Sort and place materials on racks according to predetermined sequence; Assemble customer orders from stock and stage for packing/shipping; Perform QA check for equipment readiness

FleetPride - - Responsibilities: Deliver and pickup parts per ticket; Unload and store warehouse items; Operate forklift and move stock; Follow delivery routes for efficiency; Maintain vehicle cleanliness and safety.

Staff Management SMX - - Responsibilities: Load and unload package containers, moving packages by hand and pushcart, from the warehouse to the truck; Build up package containers ready for outbound flights; Break down package containers from arriving flights; Sort, scan, and move packages within the

OnTrac - 7400 West Lower Buckeye Road - Responsibilities: Unload trailers and sort packages by ZIP codes; Load trucks for deliveries; Maintain safety and security in the warehouse; Regularly lift, push, pull and/or move items averaging 50lbs and occasionally up to 75lbs; Be a team player – everyon

Arrow Electronics - - Responsibilities: Manage warehouse operations, including receiving, storing, and shipping goods; Safely operate and drive large trucks (26 ft) through heavy traffic and urban environments; Perform inventory control tasks, including accurate tracking and documentation of goods;

PrideStaff - - Responsibilities: Pick/pack orders; Print shipping labels and attach to boxes; RF scanner operation; Assist with inventory control; Maintain workflow in a fast-paced warehouse.

OnTrac - 7400 West Lower Buckeye Road - Responsibilities: Unload trailers and sort packages by zip codes; Load trucks for deliveries; Be a team player – everyone works together to get the job done; Be able to stay on your feet and work in varying temperatures in a warehouse; Unload and sort packag

Boise Cascade - - Responsibilities: Operate forklift safely and efficiently; Receive, select, and load materials; Verify accuracy of orders after packaging; Maintain clean working area; Follow OSHA safety procedures.

Verstela - 1566517 [Material Handler / Freight Handler] As a Warehouse Associate at Verstela, you'll: Manage inventory by receiving, storing, and organizing products; Operate forklifts and other machinery to move goods safely; Inspect incoming shipments for accuracy and quality; Maintain cleanliness

Core & Main - - Responsibilities: Lead warehouse operations; Supervise warehouse team; Train and develop staff; Ensure inventory accuracy; Lift up to 50 pounds.

JobID: J3Q7MM70VW55V3D34N3 [Material Handler / Freight Handler] As a Warehouse Associate at Capstone Logistics, you'll: Handle the movement of pallets and cases on and off trailers by using a forklift, pallet jack or by hand; Learn all aspects of receiving, unloading and loading operations.

Aerotek - - Responsibilities: Operate sit-down propane forklifts and support production and shipping.