Trabajos good en Buffalo, New YorkCrear alertas

Responsibilities: The RN Charge Nurse is responsible for overseeing nursing services each shift and functions as a nursing supervisor. This position provides daily supervision of staff on duty during operational hours. Essential Duties and Responsibilities include the following. Other duties and tasks may be assigned. • Assist with clinical and operational processes to improve patient health and minimize hospitalizations and missed treatments., • Demonstrate effective use of supplies and staff labor hours., • Complete and document monthly review of patient medication profiles. Administer medications as ordered by the physician., • Assist physician during patient rounds and transcribe and implement physician orders timely., • Assist with the implementation of anemia management and medication protocols as requested., • Knowledge of and comply with federal, state, local laws and regulations, including health care professionals practice act requirements., • Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations., • May give direct patient care to the extent of performing efficient, safe dialysis, if allowed by state regulations., • Responds to all emergencies in clinic., • Communicate results of patient assessment, reassessment, and ongoing monitoring to the physician, team members, and others as appropriate to the individual needs of the patient., • Maintain collaborative working relationship with Medical Director and physicians., • Participate as a member of the Interdisciplinary team in all required patient assessment and care planning activities., • Assist in orientation of new staff as a preceptor or in assigning a preceptor., • Acts as resource person and participates in implementing and evaluating dialysis services and assures that policies and procedures are updated., • Assists Administrator in interviewing, hiring, evaluating, and disciplinary actions of center staff Qualifications: Qualifications/Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Requirements include: • Current RN license in applicable state. License must be maintained as current and in good standing., • 12 months experience in providing nursing care, including 3 months of experience in providing nursing care to patients on maintenance dialysis., • CPR certification required within 90 days of hire., • Confirmation of ability to distinguish all primary colors., • Demonstrated ability to function in a leadership position and to perform in new and emergent situations with sound judgment., • Demonstrated working knowledge of the English language and ability to communicate verbally and in writing., • Must have basic computer skills; proficiency in all USRC clinical applications required within 90 days of hire., • Must meet any practice requirement(s) for the applicable state. (See addendum for RN Charge Nurse.) Pay Range: USD $37.12 - USD $55.68 /Hr. Company (Career Site Brand): U.S. Renal Care

Job Description: We Deliver the Goods • Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much more, • Growth opportunities performing essential work to support America’s food distribution system, • Safe and inclusive working environment, including culture of rewards, recognition, and respect Position Details:, • $5,000 Sign on Bonus, • Pay: $70,000 - $75,000/per year, • Work Week: Tuesday- Friday, • Dispatch between 4am- 6am, • Home DailyPosition Purpose: Food and food service delivery Drivers fulfill a critical role in the country’s food supply chain. Our delivery drivers not only make sure the customers’ products arrive at their destination at the arranged times and in good condition, but they are the face of our company – building lasting relationships with our customers! Primary Responsibilities: The Driver - SCM is responsible for driving a tractor-trailer or straight truck on intrastate and interstate local, over-the-road (OTR), shuttle, and overnight and drive and drop routes for the purpose of delivering and/or unloading food and food-related products to customers in a safe and timely manner and in accordance with Department of Transportation (DOT) regulations. Communicates and interacts with customers, vendors and co-workers professionally ensuring questions are answered accurately and in a timely manner. Functions as a team member within the department and organization, as required, and perform any duty assigned to best serve the company. Responsibilities may include, but not limited to: • Performs all required safety checks (i.e., pre/post trip) including inspections of tractor/truck and trailer according to Department of Transportation (DOT) regulations; inspects tractor/truck and trailer to insure they meet company safety standards and take appropriate action as needed., • Reports all safety issues and/or repairs required. Follows all DOT regulations and company safe driving guidelines and policies., • Immediately reports all safety hazards. Inspects trailer for properly loaded and secured freight., • Performs count check of items and check customer invoices of products that have been loaded., • Checks and completes in an accurate and in legible fashion all required paperwork associated with freight., • Moves tractor to the loading dock and attach the preloaded trailer as needed., • Drives to and delivers customer orders according to predetermined route delivery schedule., • Unloads products from the trailer, transports items into designated customer storage areas., • Performs damage control checks on items, scans, and contact supervisor about removing orders according to company policy., • Verifies delivery of items with customer and obtain proper signatures. Collects money (cash or checks) where required. Loads customer returns on to trailer and secures trailer doors., • Ensures that tractor, trailer, and freight are appropriately locked and/or always secured., • Unloads damaged goods and customer returns and bring to the driver check-in and complete necessary paperwork. Unloads all equipment, materials and remove trash from trailers as required., • Completes daily record of hours of service and enter in log in accordance with Federal DOT, state, and company requirements., • Performs general housekeeping duties in tractor, loading dock area and keep trailers clear and clean as required. At the end of the shift secure all equipment and complete all necessary paperwork., • Performs other related duties as assigned. Qualifications: High School Diploma/GED or Equivalent 6+ months commercial driving experience Valid CDL-A Must be 21+ years of age Meet all State licensing and/or certification requirements (where applicable) Clean Motor Vehicle Report (MVR) for past 3 years Pass post offer drug test and criminal background check Pass road test Attains or has valid current DOT Health Card and/or able to secure new DOT Health Card Able to hand-lift and utilize two-wheeler, lift gate and/or other equipment to move and/or stack product cases/freight of varying size and weight throughout shift; product generally ranges from between 10-35 pounds and up to between approximately 60 and 90 pounds, depending on the location Company description Core-Mark, a Performance Food Group Company, is part of a Fortune 150 company that continues to grow as an industry leader in fresh and broad-line solutions to the convenience retail industry. Our reputation of empowering customers, employees, and communities has allowed us to build over $23 Billion in revenue. Through our distribution centers, we offer a full range of products, programs, and solutions to customers across the U.S. and Canada. Awards and Accolades Performance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our ; (2) the "EEO is the Law" and ; and (3) the .

Make a Difference on Your Own Schedule and Terms! Hiring Per Diem Bilingual Registered Dietitians for Virtual Visits! Must be fluent in Spanish/English. EmVenio Research provides quality, in-home clinical trial visits for various Sponsors and CROs. We're the only company that hires, trains, certifies, tests, and manages our own Registered Dietitians. Our mission is to bring clinical trial visits to subjects wherever they may be to increase convenience and compliance with study protocols. Be part of a team who fully embrace our values and key behaviors! • We work as a team, • We do the right thing, • We figure it out, • We pursue growth, • We take ownership Why work for EmVenio? • We bring research to every neighborhood - making it more accessible, more inclusive, and more human - so every community can share in the promise of better care., • Be a member of our general staffing pool, • No research experience required, on the job training provided, • Gain Certification through GCP training Required Qualifications • Bachelor's degree from an accredited dietetics program (If CDR examination was before January 1, 2024), • Graduate degree from an accredited dietetics program (If CDR examination was on or after January 1, 2024), • Registered Dietitian (RD) or Registered Dietitian Nutritionist (RDN) Certification by the Commission on Dietetic Registration (CDR), • Current State Dietitian License/Certification in good standing (if applicable) Job Specific Details: • Performs the full scope of Registered Dietitian practices; including, but not limited to, providing virtual lifestyle counseling visits to improve nutrition and dietary quality, mental health and developing coping skills, and building health behavior and lifestyle habits that align with participant's goals and values., • Sets appointments with subjects within the required appointment window., • Completes virtual visits for clinical trial subjects., • Works cooperatively with Clinical Project Manager and site personnel to complete visits and submit accurate source documents in a timely manner., • Regularly stay informed on the latest nutrition and food health updates., • Performs additional duties and responsibilities as deemed necessary. Standard Rate: $50.00 Hourly plus commute, mileage, training, and administrative pay. Please contact Ashley Sin at (303) 317-5486 x486 or at ashley.sin@emvenio.com today to learn more about our opportunities where you can make a difference in your own career! Professional Case Management is an Equal Opportunity Employer.

WE JUST RAISED OUR RATES! Earn between $29- $32 with a .75 shift differential!! Ellicott Center for Rehabilitation and Nursing is actively hiring Licensed Practical Nurses to work for our Skilled Nursing Facility located in Buffalo, NY. Ellicott Center has a friendly work atmosphere, join the Ellicott family today! We now offer Daily Pay through a trusted third-party provider giving you faster access to your earnings. Ellicott Center benefits include: Tuition Reimbursement Program! Generous pay rates Extra evening and night shift differentials Flexible schedules for Full-Time, Part-Time, or Per-Diem status Career Advancement Opportunities Two-Tiered Insurance Plan: Medical and Dental! Duties: Collecting required information from new Residents to be admitted Recording health details of Residents; including vitals & temperature Administering medications and injections to Residents as needed Treating and dressing wounds and bedsores as needed May be required to supervise Certified Nursing Assistants (CNAs) Helping Residents get dressed & take care of personal hygiene Monitoring Residents’ food and liquid intake and output Requirements: Must be able to work as a team member Valid NY State LPN license In good standing with State Registry Location: Buffalo, NY About Us: Ellicott Center for Rehabilitation and Nursing is a 160-bed rehabilitation and skilled nursing facility located in New York’s beautiful Buffalo, New York. Our size enables a warm, nurturing environment, which allows each resident to maintain his/her individuality. Our staff is committed to ensuring the highest quality of life for all our residents, by maintaining each resident’s dignity and independence. At Ellicott Center, we offer premium compensation, a comprehensive benefits package, professional growth & stability, innovative training programs, and more. Ellicott Center is a proud member of the Centers Health Care consortium.

Position Description Ryder is hiring an experienced Mid-Level Diesel Technicianin Cheektowaga, New Your — offering weekly pay, excellent benefits, and a Technician career you can feel good about. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T2James • Hourly Pay: $28.84 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days, • Tool Box/Tool Allowance, • Schedule: Tuesday–Saturday, • Hours: Second Shift Tuesday - Friday 3:00 pm – 11:30 pm, Saturday 7:00 am-3:30 pm We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles. Apply Here with Ryder Today Spots are filling fast — apply now to secure your spot. Call Rachel or text “Cheektowaga” to 904-869-3205 to speak with your recruiter today. • On the Job Paid Training, • PPE AND UNIFORMS Issued, • TOOL and BOOT ALLOWANCE provided, • State of the Art Equipment, • Safety is Always the First Priority Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Our Culture & Commitment: At Ryder, you’re trusted to make an impact—while enjoying room to grow and having a voice that’s heard. Our culture is built on respect, collaboration, and shared pride in doing great work rooted in innovation and safety. Your Voice. Your Success. The Future We Build Together. Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 2 months ago (6/9/2026 2:14 PM) Requisition ID 2026-203548 Location (Posting Location) : State/Province NY Location (Posting Location) : City CHEEKTOWAGA Location (Posting Location) : Postal Code 14225 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $28.84/Hr. Max Pay USD $28.84/Hr.

Position Description Ryder is hiring a Senior Level Diesel Technician in Cheektowaga, New York —providing a stable company for your career with weekly pay and a career you can feel good about. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/MechanicJobs • Hourly Pay: $31.15 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Sign On Bonus: Ryder Pays You $1750 at 30 days and $1750 at 90 days, • Schedule: Monday–Friday Weekends OFF, • Hours: First Shift 7:00 am - 3:30 pm We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — apply now to secure your spot. Call Rachel or text “Cheektowaga” to 904-869-3205 to speak with your recruiter today. All the benefits you expect — without the wait. • Paid training that keeps you ahead, • PPE AND UNIFORMS Issued, • TOOL and BOOT ALLOWANCE provided, • State of the Art Equipment, • Safety is Always the First Priority Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Basic diagnostics and repairs, including AC and electrical systems, required, • Three (3) years or more relevant work experience, preferred, • All other certification as required by location, required, • Valid Commercial Driver License (CDL) CLASS A,preferred, • All other certification as required by location, required, • ADDITIONAL REQUIREMENTS:, • Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc., • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties including:, • Performs standard vehicle maintenance, • Performs preventive maintenance, • Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable, • Completes complex and detailed mechanical inspections & repairs with minimal supervision, • Replaces defective components as instructed, • Works unsupervised on most tasks, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task., • Utilizes key functions of Shop Management System and electronic documentation available., • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)., • Acts as mentor for Tech 1 and Tech 2 levels., • Demonstrate the ability to access and use internal and external maintenance documents., • Other support duties as required to support operations. These could include but are not limited to Service Island support, • SBTIII trained within 180 days (SBT220), • Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days) Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 8 hours ago (8/7/2026 11:29 AM) Requisition ID 2026-207932 Location (Posting Location) : State/Province NY Location (Posting Location) : City CHEEKTOWAGA Location (Posting Location) : Postal Code 14225 Category Technicians/Service Employees5 Additional Locations (use this field to indicate if position can be domiciled in several areas) US-NY-Buffalo | US-NY-TONAWANDA Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000356 Min Pay USD $31.15/Hr. Max Pay USD $31.15/Hr.

Position Description Ryder is hiring an experienced Mid-Level Diesel Technicianin Cheektowaga, New Your — offering weekly pay, excellent benefits, and a Technician career you can feel good about. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T2James • Hourly Pay: $28.84 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days, • Tool Box/Tool Allowance, • Schedule: Tuesday–Saturday, • Hours: Second Shift Tuesday - Friday 3:00 pm – 11:30 pm, Saturday 7:00 am-3:30 pm We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles. Apply Here with Ryder Today Spots are filling fast — apply now to secure your spot. Call or text “Cheektowaga” to 904-869-3205 to speak with a recruiter today. • On the Job Paid Training, • PPE AND UNIFORMS Issued, • TOOL and BOOT ALLOWANCE provided, • State of the Art Equipment, • Safety is Always the First Priority Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Our Culture & Commitment: At Ryder, you’re trusted to make an impact—while enjoying room to grow and having a voice that’s heard. Our culture is built on respect, collaboration, and shared pride in doing great work rooted in innovation and safety. Your Voice. Your Success. The Future We Build Together. Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 week ago (7/22/2026 8:11 AM) Requisition ID 2026-206490 Location (Posting Location) : State/Province NY Location (Posting Location) : City CHEEKTOWAGA Location (Posting Location) : Postal Code 14225 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $28.84/Hr. Max Pay USD $28.84/Hr.

Job DescriptionMavis Tires & Brakes at Discount Prices - Automotive MechanicsPut your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Mechanics to join Team Mavis at one of our state-of-the-art automotive service, repair, and tire sales centers in the Cheektowaga, NY area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States.About the Position of Automotive MechanicAs Mavis's leaders in undercar repairs, our Automotive Mechanics are trusted to inspect, diagnose, and perform a wide variety of automotive services on customers' vehicles. Mavis's Automotive Mechanics perform a wide variety of undercar repairs, including brakes, struts, and shocks. Automotive Mechanics are also responsible for completing state-mandated inspections, changing oil and filters, checking fluids, replacing worn parts, and dismounting, mounting, rotating, and balancing tires.Employee BenefitsAt Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement.QualificationsWe recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Mechanic, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; (3) possess 2 years of experience and/or training in automotive repair and maintenance or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position; and (4) possess an extensive tool box of personal tools used in performing undercar repairs.The following additional qualifications are preferred: (1) state inspection license(s); and (2) ASE Certifications in Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5).As an active position, Automotive mechanics are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle maintenance and automotive repair. Mechanics must regularly lift and/or move items weighing over 50 pounds.What are you waiting for? APPLY NOW!Candidates can apply online at www.mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995.For more information about Mavis, please visit www.mavis.com.Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro

Job Description Agency Profile: Spectrum Health & Human Services respectfully partners with adults, children, and families as they recover from behavioral, emotional, mental health and/or substance related disorders by offering individualized and meaningful opportunities of hope, empowerment and support to achieve self-defined improvements in their quality of life. Full-time: 1298 Main Street, Buffalo, NY SUMMARY OF POSITION FUNCTION: The Care Coordinator II will apply the essential activities of case management which include assessment, planning, coordination, monitoring and evaluation with the core components (Comprehensive Case Management, Care Coordination & Health Promotion, Comprehensive Transitional Care, Patient and Family Support and Referral to Community & Social/Support Services). The Care Coordinator will be responsible for the following outcomes: to reduce utilization associated with avoidable and preventable inpatient stays, to reduce utilization associated with avoidable emergency room visits, to improve outcomes for person with mental health illness and/or substance use disorders and to improve disease-related care for chronic conditions. MAJOR DUTIES AND RESPONSIBILITIES: • Complete a comprehensive health assessment/reassessment inclusive of medical/behavioral/rehabilitative and long term care and social service needs., • Complete/revise an individualized patient centered plan or care with the patient to identify patient’s needs/goals, and include family members and other social supports as appropriate., • Consult with multidisciplinary team on client’s care plan/needs/goals., • Conduct outreach and engagement activities to assess on-going emerging needs and to promote continuity of care and improved health outcomes., • Consult with primary care physician and/or any specialists involved in the treatment plan., • Prepare client crisis intervention plan., • Coordinate with service providers and health plans as appropriate to secure necessary care, share crisis intervention and emergency information., • Link/refer client to needed services to support care plan/treatment goals, including medical/behavioral health care; patient education, and self help/recovery, and self management., • Conduct case conferences with an interdisciplinary team to monitor and evaluate client status., • Advocate for services and assist with scheduling of needed services., • Coordinate with treating clinicians to assure that services are provided and to assure changes in treatment or medical conditions are addressed., • Monitor/support/accompany the client to scheduled medical appointments., • Follow up with hospitals/ER upon notification of a client’s admission and/or discharge to/from an ER, hospital/residential/rehabilitative setting., • Facilitate discharge planning from an ER, hospital/residential/rehabilitative setting to ensure a safe transition/discharge that care needs are in place., • Notify/consult with treating clinicians, schedule follow up appointments, and assist with medication reconciliation., • Link client with community supports to ensure that needed services are provided., • Follow-up post discharge with client/family to ensure client care plan needs/goals are met., • Develop/review/revise the individual’s plan of care with the client/family, • Consult with client/family/caretaker on advanced directives and educate on client rights and health issues, as needed, • Meet with client and family, inviting any other providers to facilitate needed interpretation services., • Refer client/family to peer supports, support groups, social services, entitlement programs as needed., • Identify resources and link client with community supports as needed, • Collaborate/coordinate with community base providers to support effective utilization of services based on client/family need., • Maintains complete, current and accurate member files which comply with The Health Home Standards. Documents all member related activity in a progress note by the conclusion of the next business day., • Other duties as requested. SKILLS/COMPETENCIES: • Effective verbal and communication skills, • Ability to teach and influence others, • Demonstrated ability to work effectively in a team environment., • Demonstrated effective interpersonal relationship and customer services skills, • Good organizational and time management skills, • Ability to work effectively with people from diverse cultures and socioeconomic conditions., • Actively listens to others to understand their perspective and ensure understanding regardless of barriers., • Critical thinking ability, • Ability to handle protected health information (PHI) in a manner consistent with The Health Insurance Portability and Accountability Act of 1996., • Knowledge of computerized systems., • Knowledge of local and surrounding area resources EDUCATION REQUIREMENTS: • Bachelor or master’s degree in a Human Service field and at least three years’ experience working in the human service field OR Must have three years’ experience at Spectrum as a Care Coordinator I with positive job performance. EXPERIENCE: • “Qualifying Experience” means verifiable full or part-time experience in care coordination with the following populations: person with a chronic illness, and/or persons with a history of mental illness, • Must possess a valid Driver’s License with a satisfactory driving record, and possess a personal vehicle for job requirement COMPENSATION: $20.08/hr- $25.60/hr

Job DescriptionPacific Rail Services is seeking a Chassis Mechanic to join our team!We are looking for applicants with mechanical abilities, people who are good with their hands and someone able to work outdoors and be on the feet for a majority of the day. We're looking for someone with fundamental experience and people who are willing to work for a purpose on trailers, containers, and chassis. You would be responsible for chassis maintenance and repair working at the Norfolk Southern Buffalo, NY Railyard. We do offer on the job training. Job Summary: • The Chassis Mechanic is responsible for inspecting and analyzing malfunctions, completing repairs and efficiently maintaining chassis and trailers. Pay: $20-22/hour based on experience. Qualifications: • Strong work ethic., • (Preferred but not required) Have a minimum 1 year's mechanical experience to get certified for FMCSA inspections., • Deadline and detail oriented., • Strong mechanical aptitude and troubleshooting skills., • Welding experience is a plus., • Hostler (yard jockey) experience is a plus., • Knowledge of shop equipment. Responsibilities: • Work safely and efficiently., • Perform quality inspections., • Replace suspension components and landing legs., • Make repairs that are documented., • Patch / Weld containers., • Change tires., • Perform air brake inspections and repairs., • Supply your own tools (basic). Conditions For Employment if you are offered a job: • Must be able to pass a Physical Capabilities Test, a drug test, • Must have a valid driver's license., • (others conditions apply that are not listed above and will be discussed during the interview process) Benefits: (Medical benefits start after 60 days and the first of the month after that. Other benefits start after your 90-day probationary period) • Make $55,000 - $65,000 in your 1st year!, • Affordable Healthcare, Free Dental, cheap Vision Benefits, • Free Life Insurance, • Paid holidays, paid personal days, • boot reimbursement, • 401K, • Yearly Raises, • Vacation Pay Work Location: • 500 Bison Parkway, Buffalo, NY You will be an employee of Pacific Rail Services and not an employee of the Railroad.

Job Description Overview The Data Intern will work closely with the Data Analyst to support a variety of data-related projects and daily operations. This role is ideal for a college student seeking hands-on experience in data analytics, business intelligence, and organizational reporting. Intern Activities: • Assist with data gathering, cleaning, and transformation for reporting and dashboard development., • Support the creation and maintenance of dashboards, logic models, and scorecards., • Help document data flows, relationships, and processes (e.g., ER diagrams, data dictionaries)., • Participate in data validation and quality assurance activities., • Aid in preparing reports for program evaluation, strategic planning, and committee participation., • Contribute to the organization and review of program data needs across multiple systems (e.g., EHRs, BI platforms, Odoo, FAMs)., • Support the implementation of artificial intelligence initiatives and learning groups as directed., • Assist with documentation and communication of data findings for various audiences., • Attend relevant meetings and work groups as needed. Minimum Requirements • Current enrollment in a Bachelor’s or Master’s program in Data Science, Computer Science, Information Systems, or a related field., • Must be enrolled in an internship program and receiving school credit for internship hours, • Foundational knowledge of data modeling, data gathering, and data cleansing., • Proficiency in Microsoft Excel and basic SQL., • Familiarity with dashboarding tools (e.g., Power BI, Tableau, Sisense)., • Strong analytical and problem-solving skills., • Ability to work independently and collaboratively., • Good written and oral communication skills., • Interest in data analytics and its impact on organizational outcomes. Internship Details • Supervision and mentorship provided by the Data Analyst will occur on a bi-weekly basis. Supervision meetings will be scheduled to provide guidance, review progress, answer questions, and support professional development. Additional check-ins or support sessions can be arranged as needed to ensure the intern’s learning goals are met., • Opportunity to participate in team meetings, training, and collaborative projects., • C+FS offers a wide variety of programs. As the Data Intern, you will have the opportunity to learn more about how non-profit agencies support communities and make a positive impact., • Flexible schedule to accommodate academic commitments., • Onsite or remote options may be available. Students should be local to the WNY area. This is an unpaid internship.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Installs intrusion, fire, CCTV, and access control security systems., • Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs., • Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements., • Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment., • Conducts tests to ensure all newly installed systems and component devices are operational., • Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state, or federal codes; legal and/or insurance requirements., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requested Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred, • NICET Certification preferred, • IP Video and IT experience preferred, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including: • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Installs intrusion, fire, CCTV, and access control security systems., • Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs., • Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements., • Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment., • Conducts tests to ensure all newly installed systems and component devices are operational., • Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state, or federal codes; legal and/or insurance requirements., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requested Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred, • NICET Certification preferred, • IP Video and IT experience preferred, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including: • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Installs intrusion, fire, CCTV, and access control security systems., • Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs., • Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements., • Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment., • Conducts tests to ensure all newly installed systems and component devices are operational., • Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state, or federal codes; legal and/or insurance requirements., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requested Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred, • NICET Certification preferred, • IP Video and IT experience preferred, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including: • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Buffalo Center is actively seeking energetic Licensed Practical Nurses (LPNs) to work for our Skilled Nursing Facility located in Buffalo, NY. Now Offering a $7,500 Sign-On Bonus! We now offer Daily Pay through a trusted third-party provider giving you faster access to your earnings. WE JUST RAISED OUR RATES! Earn between $29.58 - $34.39, with a $0.75 Evening/night shift differential! All Shifts Available! Buffalo Center benefits include: Tuition Reimbursement Program! Generous pay rates Extra evening and night shift differentials Flexible schedules for Full-Time, Part-Time, or Per-Diem status Career Advancement Opportunities Two-Tiered Insurance Plan: Medical and Dental! Duties: Collecting required information from new Residents to be admitted Recording health details of Residents; including vitals & temperature Administering medications and injections to Residents as needed Treating and dressing wounds and bedsores as needed May be required to supervise Certified Nursing Assistants (CNAs) Helps Residents get dressed & take care of personal hygiene Monitors Residents’ food and liquid intake and output Requirements: Must be able to work as a team member Valid NY State LPN license In good standing with State Registry Location: Buffalo, NY About Us: Buffalo Center is a 200-bed rehabilitation and skilled nursing facility located in Buffalo, New York. Our size enables a warm, nurturing environment, which allows each resident to maintain his or her individuality. Our staff is committed to ensuring the highest quality of life of all our residents, by maintaining each resident’s dignity and independence. Buffalo Center is a proud member of the Centers Health Care consortium.

Job Description Overview WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: $35-$42/hr, • Sign on Bonus: Up to $3,000.00 DOE, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities · Ability to report to work in a timely manner as scheduled by supervisor. · Repair and overhaul equipment such as compressors, water pumps, air handlers, electrical and mechanical control devices and other similar machinery. · Test malfunctioning systems and components using electrical and/or mechanical skills. · Maintain legible corporate and personal records of work history. · Provide general repair work on refrigeration, heating and ventilation equipment such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors. · Provide preventative maintenance activities; diagnose equipment malfunctions and operating efficiency of mechanical equipment. · Perform work on minor construction and remodeling projects including startups of new installations. · Embodies the CoolSys CARES culture (Collaboration, Accountability, Respect, Empowerment, Safety). · Performs other duties as assigned. Qualifications Education / Training · High school diploma or GED, equivalent work experience and trade or technical school classes. · Valid EPA certificate. Work Experience / Skills · 3-5 year's experience in commercial HVAC, refrigeration, and electrical required. · Basic knowledge of refrigeration, HVAC, ice machines, gas furnaces, and electrical. · Experience working on refrigeration equipment in convenience stores or supermarkets a strong plus. · Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. · Knowlege of the components in a single-phase compressor and single-phase motor control circuit. · Ability to use an ohmmeter. · Ability to verify a capacitor is in good standing. · Ability to demonstrate an understanding of defrost circuits. · Knowledge of schematic and wiring diagram. · Ability to identify/explain function of refrigeration components. · Ability to properly leak check a single-compressor system. · Ability to demonstrate proper PPE and safety equipment. · Ability to set up LPC as the primary temperature control and as a pump down safety control. · Ability to demonstrate how to determine superheat and how to set expansion valve superheat. · Ability to verify a defrost termination is functional. · Ability to demonstrate the proper tasks for performing preventative maintenance on HVAC systems. · Ability and knowledge of the functions and safety precautions of the components of a gas furnace system. · Ability to properly recover refrigerant from a refrigeration system. · Ability to change oil in a vacuum pump. · Ability to demonstrate how to properly hook up a gauge set for evacuation. · Knowledge of reporting procedure for a large refrigerant release. · Knowledge of level 2 experience/information. · Must be able to lift up to 60 lbs. with no assistance and be able to sit and/or stand for several hours at a time. · Valid driver’s license. · Good driving record. · Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. · Ability to use typical business tools including E-Mail, Word, Excel, etc.

Job Description Position Summary: Pine Pharmaceuticals Operators shall be required to perform all necessary activities to provide the highest quality sterile drug products to our customers in a timely manner, while following all Pine Pharmaceuticals Standard Operating Procedures pertaining to sterile processing. Essential Functions: • Maintenance of his or her aseptic processing skills and shall demonstrate competency upon completion of the training program, and every three months thereafter, as described in SOP’s, including successful completion of assigned media fills associated with Production Operator I., • The completion of aseptic garbing and gowning., • The compounding of sterile products, • The cleaning and maintenance of aseptic compounding facilities., • Equipment use and maintenance in sterile compounding areas., • Use of environmental monitoring and equipment as outlined in SOP’s., • Maintains all personal cGMP related training in a current state., • Observes all environmental, health, and safety policies., • Performs other duties and tasks assigned by management., • Maintains proper documentation in appropriate logbooks and batch records., • Qualified in or must become qualified in 1-2 processes outlined in the Operations Growth Chart. Education and Experience: • High School Diploma or equivalent., • Cleanroom experience a plus. Knowledge, Skills and Abilities: • Familiar with cGMP and USP<797> requirements., • At times, continuous repetitive motion of hands/wrist. Gripping, capping, filling syringes., • Good interpersonal skills and willingness to work with others., • Good organizational skills and attention to detail., • Ability to prioritize tasks. Posting for the following shifts: M-F 10a-6p

Job Description Job Title: Hose Assembly and Production Technician 1st Shift - $17.50/hr Job Description This role focuses on assembling, testing, and tagging hoses, tubes, and fittings to meet established quality and efficiency standards in a clean, organized production environment. You will use basic computer and math skills, interpret blueprints and technical documents, and operate hand tools and measurement instruments while working both independently and as part of a team. The position requires standing for extended periods, lifting up to 40 lbs., and consistently following safety and quality procedures during a Monday–Thursday, first-shift schedule. Responsibilities • Assemble hoses, tubes, and fittings according to blueprints, technical documents, and production specifications., • Test assembled hoses and tubes to ensure they meet quality, performance, and safety standards., • Tag and properly identify finished products for tracking, inventory, and shipment., • Perform regular quality checks throughout the assembly process to maintain high standards of workmanship., • Use hand tools, measurement tools, and basic production equipment safely and accurately., • Follow all safety procedures, guidelines, and company policies while working on the production line., • Maintain a clean, organized, and safe workspace, including tools, equipment, and workstations., • Complete assigned tasks efficiently to meet daily production goals and timelines., • Use basic computer skills and office equipment to document work, access instructions, and update production information., • Support training initiatives by participating in training sessions and applying new skills learned from the training department., • Contribute to continuous improvement efforts by identifying opportunities to improve processes, quality, or efficiency., • Collaborate with team members and communicate effectively to ensure smooth workflow and problem resolution., • Demonstrate flexibility by being cross-trained and assisting in other areas of production as needed. Essential Skills • Ability to assemble hoses, tubes, and fittings in a production environment., • Strong attention to detail and a consistent focus on product quality., • Ability to read and interpret blueprints and technical documents., • Basic math skills for measurement, counting, and simple calculations., • Mechanical aptitude, including the ability to use measurement tools accurately., • Ability to use hand tools safely and effectively in an assembly or production setting., • Basic computer skills and familiarity with office equipment for documentation and communication., • Ability to stand for long periods and lift up to 40 lbs., • Ability to work independently with minimal supervision and as part of a team., • Good communication skills and the ability to follow instructions clearly., • Problem-solving skills to address issues that arise during assembly and testing. Additional Skills & Qualifications • Experience in general production, general labor, or assembly environments., • Experience in hose assembly or production line work., • Flexibility and willingness to be cross-trained in other production areas., • Comfort working in a structured, process-driven environment., • Interest in continuous learning and participating in high-level training programs. Why Work Here? You will work in a highly organized, clean, and climate-controlled facility that prioritizes safety, quality, and employee development. The Monday–Thursday schedule with Fridays off supports work-life balance while still offering a full-time opportunity. An entire training department provides high-level training and ongoing skill development, helping you grow your capabilities and advance your career. The environment emphasizes teamwork, continuous improvement, and clear processes, creating a supportive setting where you can perform at your best. Work Environment This role is based in a production environment that features an entire training department dedicated to onboarding and skill development. The facility is extremely clean, well lit, organized, and climate controlled, providing a comfortable and professional workspace. You will work on a first shift schedule from 7:00 a.m. to 5:30 p.m., Monday through Thursday, with Fridays off. The work involves standing for extended periods, using hand tools, measurement tools, and basic office equipment, and operating within clearly defined safety and quality procedures. Job Type & Location This is a Contract position based out of Buffalo, NY. Pay and Benefits The pay range for this position is $17.50 - $17.50/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Buffalo,NY. Application Deadline This position is anticipated to close on Aug 31, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. \nCompany Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Are you self-motivated and proud of the work you do? Here at Aramark, we take pride in the level of service and safety we provide! As a General Utility Worker on our team of other service stars, you?ll take on the important task of maintaining the cleanliness of dishes, equipment, and the environments we work in. The best part? It?s just the starting point of your career, so launch your future with us! Essential functions and responsibilities of the position may vary by Aramark location based on client requirements and business needs. COMPENSATION: The Hourly rate for this position is $18.00 to $20.00. If both numbers are the same, that is the amount that Aramark expects to offer. This is Aramark?s good faith and reasonable estimate of the compensation for this position as of the time of posting. BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here _ There is no predetermined application window for this position, the position will close once a qualified candidate is selected. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all applicable laws, including, but not limited to all applicable Fair Chance Ordinances and Acts. For jobs in San Francisco, this includes the San Francisco Fair Chance Ordinance. ? Ensure guest satisfaction by maintaining all dishes, pots, pans, silverware, glasses, equipment, and kitchen utensils are cleaned and sanitized ? Maintains dishwashing station, three compartment sink and related areas cleaned ? Ensures equipment is clean and in working condition; reports any issues to management ? Performs other light maintenance and custodial tasks ? Maintains excellent customer service and positive attitude towards guest, customers, clients, co-workers, etc. ? Adheres to Aramark safety policies and procedures including proper food safety and sanitation ? Ensures security of company assets At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. ? Demonstrates an understanding of basic sanitation procedures ? Must be able to follow basic safety procedures due to exposure to hazardous chemicals ? Must be available to work flexible hours including evenings and weekends This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on , and .

Time to step up your career! This is your moment to shine and lead the way for others too. We?re hiring full-time Food Service Supervisors to join our passionate Food Services Team. Alongside a manager who will help coordinate and lead operations, you?ll help oversee staff, collaborate with teammates, and help where needed. We can?t wait to see your growth, all while igniting your passion and pursuing what matters to you. COMPENSATION: The Hourly rate for this position is $20.00 to $22.00. If both numbers are the same, that is the amount that Aramark expects to offer. This is Aramark?s good faith and reasonable estimate of the compensation for this position as of the time of posting. BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here _ There is no predetermined application window for this position, the position will close once a qualified candidate is selected. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all applicable laws, including, but not limited to all applicable Fair Chance Ordinances and Acts. For jobs in San Francisco, this includes the San Francisco Fair Chance Ordinance. ? Produce and maintain work schedules and may prepare production packets (Production sheets and recipes). ? Direct daily activities. ? Maintains food production that ensures the safety and quality of food according to policies, procedures, and department requirements. ? Ensure that food items are stored in a safe, organized, and hazard-free environment. ? Maintain all serving schedules; ensure that all food items are served per menu specifications in a safe and appropriate manner following Aramark policies and procedures. ? Maintain a sanitary department following health and safety codes and regulations. ? Maintain accurate inventory on a weekly basis. ? May prepare orders as needed to ensure accurate production for location. ? Supervise and evaluate employees; counsel; promote employee growth, efficiency, morale, and teamwork. ? Maintain a safe and hazard-free working environment. ? Train/mentor other food service workers. ? Maintain logs on all maintenance required on equipment within the department. ? Ensure all food safety/temperature logs are completed with appropriate corrective action, as necessary. ? Perform preventative maintenance checklist. ? Recommend replacement of existing equipment to meet needs of facility. ? Proficiency in multi-tasking. ? Perform other duties as requested by the Food Service Director or Manager whenever his/her skill and/or experience would be vital to initiate, coordinate, or complete any given program. ? Must fill in for absent employees at location, as necessary. ? Maintain knowledge of daily catering events and confirm they are prepared and delivered on time. ? Be able to work occasional night and weekend catered events. ? Attend food service meetings with staff. ? Maintain communication with staff (including office staff, e-mail, phone calls, inter-office mail, etc). ? May perform cashier duties as the need arises. ? Promote good public relations. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. ? Must read, write, and understand verbal instructions ? Must complete a sanitation course either before or during first year ? Must be knowledgeable in operating an efficient cost-effective program. ? Ability to perform basic arithmetic ? Maintain emotional control under stress ? Ability to resolve interpersonal situations ? Strong organizational skills Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on , and .

Job Description Grounds person position available to join a dynamic crew at various apartment communities in the Buffalo Area. Full time, Monday - Friday position with occasional opportunity for over time. We offer excellent, low cost health insurance, 401K with employer contribution and competitive, experience based compensation. As a valued employee, you will be eligible for performance based raise every year. We offer paid sick time, holidays and generous vacation time upon eligibility. We encourage growth within the company, so advancement opportunities are offered to ambitious and well performing employees. We provide weather appropriate uniforms. Requirements: Good communication skills. Valid, clean driver's license. Prior experience a big plus, but on-site training is available When replying to this ad, please include your phone number and attach resume if possible.

Job Description We are a small construction company seeking a hard-working and reliable general laborers to join our team. You will participate in a variety of construction projects. Prior experience in construction settings is preferred, but we are willing to train the right candidate. To be successful in this position, you will work well as part of a team, follow directions, have good problem solving skills, and be able to perform strenuous physical tasks. Applicants must have a valid driver’s license and reliable transportation. Applicants must have the ability to perform heavy lifting of construction materials as well as stand, sit or kneel as needed for extended periods. We offer three (3) paid Holidays per year. After a 90 day probationary you are eligible to accrue PTO, a fourth floating holiday, and other perks based on attendance and performance. Responsibilities include but are not limited to: Preparing construction sites, materials, and tools. Loading and unloading of materials, tools, and equipment. Removing debris, garbage, and any dangerous materials from sites. Assisting contractors, e.g. electricians and painters, as required. Following all health and safety regulations. Install and finish drywall Interior and exterior painting Sheeting and siding Rough carpentry and finish carpentry. Flooring installation Mechanical repair Masonry Our expectations: Positive attitude, strong work ethic and professional demeanor at all times. Reliable transportation is required. Willingness to learn new skills. Valid Driver's License and clean driving record required. Own transportation is required. Be able to work independently. Time management skills. Must be able to lift a minimum of 50 pounds Must be able to climb a 12 foot ladder. Job Type: Full-time Salary: $18 - 23 per hour to start. starting pay is dependent on experience. \nCompany Description We are a small construction company with big goals. We are looking for dedicated employees that will grow with us. We are a small construction company with big goals. We are looking for dedicated employees that will grow with us.

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards.We are currently looking to hire a full-time Tank Builder / Welder (Nationwide) Day to Day Duties: • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matterTo Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR Uq9VfNiN8E

Job Description Production Operator Facility: Buffalo, NY General Description The Production Operator is responsible to effectively operate the equipment to which they are assigned, safely and efficiently. They must use any provided equipment, tooling, and measuring devices to ensure a quality product is produced. They must demonstrate the ability to take directions from the immediate manager and designated management representatives. Specific Duties • Start up and shut down equipment in a safe manner, report issues to immediate manager., • Read and understand the work instructions and engineering drawings/prints required for the assigned job., • Use measuring devices required to ensure a quality product is being produced., • Meet production rate requirements set by Engineering/APU., • Accurately label parts with any required markings., • Sand, deburr, file, polish and perform other functions by hand as required to produce a quality finished product., • Perform 100% visual inspections on all parts processed., • Report defective parts as scrap and report excessive scrap issues to immediate manager., • Maintain machine maintenance levels to ensure machine operations such as filling lube oil, hydraulic oil, and/or coolant levels., • Handle basic tool changes., • Ability to use or learn to use a computer to look up documents, request assistance from other departments and managers, and enter production information., • Ability to accurately complete the paperwork requirements for each operation., • Responsible for training new employees as requested by immediate manager., • Must keep work area clean, neat, and orderly. Perform general housekeeping functions daily as required to maintain a safe and clean work environment., • Communicate professionally with everyone in the plant., • Follow instructions from the Shift Leader, APU Manager, or Production Manager., • Work overtime as required., • Fill in or cross train in other departments as assigned., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Previous experience working in a manufacturing environment is preferred., • Ability to read and understand manufacturing work instructions and drawings is preferred., • Ability to use measurement devices is required., • Basic math skills are required., • Good communication skills are required., • Ability to lift 60 pounds on a regular basis, multiple times an hour., • Must be able to work in a non-air-conditioned environment for a minimum of eight hours per day. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk, and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting, and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a full or half face respirator conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safety I Quality I Customer Obsession I Speed I Agility OverviewThe Working Lead for our 2nd Shift Welding team is responsible for performing and carrying out the day-to-day responsibilities of their team. This position is to serve as the subject matter expert on the work being performed on the team and is the first point of contact for the employees on the work they are assigned for the day. The Working Lead will directly interface with leadership members as to the status of projects at the end of each day, and effectively communicate any needs identified by their team. Job Responsibilities • Reviews, analyzes, modifies, and implements efficient and effective department processes, policies, and procedures., • Interfaces with QA manager to ensure highest degree of final quality and develop new and better quality methods., • Ensures approved manufacturing methodology is being followed., • Develops and communicates goals and key initiatives to improve plant performance and success., • Performs the physical work of the department, • Maintains knowledge of machine capacity and develops solutions for efficient utilization., • Ensures all safety rules and regulations are followed; investigates accidents in a timely, accurate, and complete manner., • Assigns duties and monitors quality of work; assures staff conforms to organizational policies and procedures and government regulations., • Provides day-to-day guidance and oversight of subordinates; actively works to promote and recognize performance., • Keeps up to date on overall activities of the team, identifying problem areas and taking corrective actions., • Directly supervise employees assigned to their department and carries out supervisory responsibilities in accordance with organizational policies and procedures. Required Qualifications, • Two to four years related welding/fabrication experience, • Demonstrated proficiency in supervising and motivating direct reports, • Proficiency in reading and understanding electrical blueprints, schematics, and diagrams, • Commitment to excellence and high standards, • Excellent written and oral communication skills, • Basic competence in direct reports duties and tasks, • Strong organizational, problem-solving, and analytical skills, • Ability to manage priorities and workflow, • Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm, • Ability to work independently and as a member of various teams and committees, • Proven leadership skills, • Proven ability to handle multiple projects and meet deadlines, • Strong interpersonal skills., • Ability to deal effectively with a diversity of individuals at all organizational levels., • Good judgement with the ability to make timely and sound decisions, • Ability to understand any and all safety requirements and cautions, • Ability to perform the physical labor necessary, • Ability to effectively communicate with people at all levels and from various backgrounds.ShiftMonday - Friday : 3:30pm - 12amPerks & Benefits GTI Fabrication offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. #ZR GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. Company Description GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safety I Quality I Customer Obsession I Speed I Agility OverviewThe Working Lead for our 2nd Shift team is responsible for performing and carrying out the day-to-day responsibilities of their team. This position is to serve as the subject matter expert on the work being performed on the team and is the first point of contact for the employees on the work they are assigned for the day. The Working Lead will directly interface with leadership members as to the status of projects at the end of each day, and effectively communicate any needs identified by their team.Job Responsibilities • Reviews, analyzes, modifies, and implements efficient and effective department processes, policies, and procedures., • Interfaces with QA manager to ensure highest degree of final quality and develop new and better quality methods., • Ensures approved manufacturing methodology is being followed., • Develops and communicates goals and key initiatives to improve plant performance and success., • Performs the physical work of the department, • Maintains knowledge of machine capacity and develops solutions for efficient utilization., • Ensures all safety rules and regulations are followed; investigates accidents in a timely, accurate, and complete manner., • Assigns duties and monitors quality of work; assures staff conforms to organizational policies and procedures and government regulations., • Provides day-to-day guidance and oversight of subordinates; actively works to promote and recognize performance., • Keeps up to date on overall activities of the team, identifying problem areas and taking corrective actions., • Directly supervise employees assigned to their department and carries out supervisory responsibilities in accordance with organizational policies and procedures. Required Qualifications, • Two to four years related welding/fabrication experience, • Demonstrated proficiency in supervising and motivating direct reports, • Proficiency in reading and understanding electrical blueprints, schematics, and diagrams, • Commitment to excellence and high standards, • Excellent written and oral communication skills, • Basic competence in direct reports duties and tasks, • Strong organizational, problem-solving, and analytical skills, • Ability to manage priorities and workflow, • Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm, • Ability to work independently and as a member of various teams and committees, • Proven leadership skills, • Proven ability to handle multiple projects and meet deadlines, • Strong interpersonal skills., • Ability to deal effectively with a diversity of individuals at all organizational levels., • Good judgement with the ability to make timely and sound decisions, • Ability to understand any and all safety requirements and cautions, • Ability to perform the physical labor necessary, • Ability to effectively communicate with people at all levels and from various backgrounds.ShiftMonday - Friday : 3:30pm - 12amPerks & Benefits GTI Fabrication offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: Snyder Industries, Inc., has openings for CNC Machinists. At Snyder Industries we are serious about our commitment to our employees. We are aligning ourselves to be an employer of choice among manufacturers and want to help you grow both personally and professionally. Available benefits include: Work/life balance with optional overtime Flexible schedule Double-time pay for all hours worked over 48 in a workweek 15% shift differential Quarterly Bonuses Medical ( 100% paid option available) Dental and Vision Life Insurance Paid Time Off A rewarding 401(k) program Annual work boot allowance Onsite Fitness Center Onsite Cafeteria Life Resources through our EAP Apply now to join our team of growing professionals and work for a company you’ll be proud of! An industry leader with over 50 years of experience, we specialize in providing high quality components for the heavy equipment industry utilizing our updated mills, lathes, gear and heat treating/induction machinery. If you desire a team atmosphere and want to excel, look no further! In our climate-controlled shop we offer OT instead of mandating it, making our employees and their needs a top priority to align with the realistic goals set by our customers. We set the bar high for both safety and cleanliness. Requirements: Objective: Produces machined parts by setting up and operating computer numerical controlled (CNC) machines, maintaining quality, efficiency, and safety standards as well as maintaining equipment and supplies. Role & Responsibilities: Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, locations of surfaces, and machining parameters. Sets up mills and lathes by entering instructions, including zero reference points, setting tool registers, offsets, compensation and conditional switches, calculating requirements, including basic math, geometry, and trigonometry, proving part programs. Sets up mills and lathes by installing and adjusting three and four jaw chucks, tools, and attachments. Verifies settings by measuring first run parts and sample work pieces, adhering to established standards. Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling, and thread chasing operations, detecting malfunctions, troubleshooting processes, replacing worn tools, and adhering to quality assurance procedures and processes. Maintains equipment by completing minor preventive maintenance requirements, notifying maintenance of issues and completing maintenance request forms. Maintains continuity between shifts by communicating job status, irregularities, and continuing needs. Completes production and quality logs as required Maintains safe operations by adhering to safety procedures and regulations. Handles miscellaneous duties as required. Education & Experience: High School diploma or equivalency Skills & Abilities: Must be able to grasp conceptual items Must be able to follow G Code Participate in process improvement Must have good communication skills Possess a good mechanical aptitude Applies tooling coordination requirements Gives attention to detail Must be able to stand, stoop, bend, twist, reach, as well as wrench parts Ability to lift up to 50lbs occasionally Position Type/Expected Hours of Work: Hourly M-Th- 3 pm - 11: 30 pm, F 2:30 pm - 11 pm (2nd shift hours) Optional Overtime Equal Employment Opportunity Statement: Snyder Industries provides equal employment opportunity to all applicants and employees without regard to race, color, gender, age, disability, religion, creed, national origin, genetic predisposition, marital status, sexual orientation, victims of domestic violence, gender identity, gender expression, political belief or activity, veteran status, victims of domestic violence, familial status or any other status protected by law.

Job Description Safetec of America, Inc. has been a trusted source for infection control, first aid, and compliance products for over 30 years. We are a local, family-owned OTC pharmaceutical manufacturing company with a reputation for retaining employees, as we treat them like family. We are seeking a full-time 2nd Shift Machine Operator to join our expanding team! 2nd Shift: Monday - Thursday 4:00 pm - 2:30 am Competitive pay with excellent benefits, including generous paid time off and a shift differential for 2nd shift. Responsibilities • Ability to detect equipment malfunctions or misalignments visually and by listening to the machine's noise, • Operating, adjusting, testing, and maintaining machines, • Communicate quality, material, and production issues to the supervisor, • Keep the area clean and organized at all times Required Skills and Work Experience: • Two or more years of experience in a manufacturing setting preferred, • Attention to detail and accuracy in work is a must, • Ability to lift at least 35 lbs., • Ability to push/pull using a pallet jack, • Ability to reach and bend frequently, • Ability to go up and down ladders, • Must have good verbal and written communication skills, • Mechanical ability, • Ability to work well with others

Job Description At TireHub we move more than tires – we move businesses forward, support communities, and help keep America rolling. And behind it all? Our people. We call them Hubbers – because they’re at the center of everything we do. From behind the wheel to the warehouse floor, from customer calls to corporate strategy, every Hubber plays a role in something bigger than themselves. And we show up every day ready to say yes – to challenges, to each other, and to getting it done right. The primary role of the Logistics Specialist (LS) involves loading and unloading tires for warehouse storage and/or timely customer delivery, including the unloading and staging of products at the customer’s business location. The LS is expected to represent TireHub professionally in all customer interaction and maintain safe driving practices, all while delivering exceptional customer service and fostering strong customer relationships. When you say YES to something bigger: This position has a starting wage of $18.55 per hour with guaranteed increases of $2.00 over your first year of employment with TireHub. Monday through Saturday – Fluctuating day shift hours Benefits summary: · Paid weekly on Fridays · Premium-Free Hubber Health Insurance · TireHub funded Health Savings Account · Additional benefit options including TireHub paid short/long term disability and life insurance benefits · Paid vacation and holidays PLUS your birthday off! · Parental leave programs · Build your financial future with 401k including TireHub match · Uniform program · Access to tire discounts, perks, and so much more! This position reports to an Assistant TLC Leader. The individual must exhibit the following TireHub core commitments: • Approachable - If a company could smile, we would. Instead, we rely on our people to show it. We care about each other and our customers because we know business only gets done right when people respect each other and value relationships., • Adventurous - What TireHub is set up to do is intentionally outrageous. So, we readily embrace challenges with the courage to introduce new ideas and the ambition to build something unique., • Relentless - We tackle our work with energy. We deliver on our commitments with enthusiasm. And we don't give up until we get to the end., • Speedy - Speed is the currency in the tire industry. When we commit to a job, we get the job done – and we do it fast. Roles and Responsibilities: • Responsible for distribution of tasks including: · General Warehousing · Delivery Services · Vehicle Maintenance *Adjustments to these allocations are made as business needs evolve • Loads, unloads, inspects, and tallies tires to and from transport vehicles (trailer trucks/box trucks/delivery vans)., • Follows TireHub safety standards with respect to selecting, packing, counting, labeling, and palletizing customer orders and position them in designated locations using the bin locator system., • Operates equipment such as forklifts, order pickers and pallet jacks, ensuring adherence to safety protocols., • Conducts and participates in cycle counts, tallies, and labeling as part of regularly scheduled and annual inventory control procedures., • Collecting payments from customers on Cash on Delivery (COD) transactions., • Ensures vehicles remain clean and in good mechanical/physical condition., • Conducts pre/post-trip vehicle inspections daily and immediately report any operational issues or mechanical defects to the supervisor or designated person., • Completes all the necessary driver and vehicle maintenance logs, on a regular basis., • Ensure compliance with all TireHub policies and procedures., • Participates and maintains ongoing training through in-class, in-person, or computer-based learning modules, as assigned., • Completes other tasks assigned by their Supervisor or another member of leadership. Competencies: • Optimizes Work Processes: Knowing the most effective and efficient processes to get things done, with a focus on continuous improvement., • Manages Ambiguity: Operating effectively, even when things are not certain, or the way forward is not clear., • Drives Results: Consistently achieving results, even under tough circumstances., • Collaborates: Building partnerships and working collaboratively with others to meet shared objectives., • Communicates Effectively: Delivers communications that convey a clear understanding of the unique needs of different audiences. For this role, you will need: • At least 1 year of general work experience., • Must have a valid driver’s license., • Must have a mimimum of 2 years of driving history, with a valid driver's license (does not include driver's permit)., • Must be 19 years old or older. · Required Knowledge, Skills, and Abilities: • Excellent communication and customer service skills., • Repeatedly lift, pull, push and/or move tires (up to 50lbs) with or without mechanical assistance., • Capable of frequent bending, twisting and lifting., • Multitask in a fast-paced environment., • Accurately and efficiently load, unload and place tires in warehouse and delivery vehicles., • Work up to 35 feet above ground-level., • Work up to 8 hours per day on a forklift., • Follow traffic rules and regulations by safely driving TireHub vehicles to deliver tires to customer locations., • Work independently and as part of a team., • Familiarity with Manifest, GPS and Navigation systems., • Must be able to maintain a forklift certification., • Must be able to maintain a valid driver’s license. Working Conditions · Required to lift, pull, push, and/or move tires (up to 50 lbs. or greater with or without mechanical assistance following standard operating and safety procedures. Other physical requirements including, regularly being required to stand, walk, kneel, bend, crawl, climb and balance. · Maybe required to handle hazardous materials and wear various forms of protective equipment (gloves, protective eyewear, etc.). · Specific vision requirements may include close, distance, color, peripheral visions, depth perception and ability to adjust focus. · Works and operate equipment in various settings, ranging from non-climate-controlled warehouses to customer locations. · Extended day, evening, and weekend work (including Saturday) may be required as job duties demand and may include little to no advanced notice. · Driving during the night or in inclement weather may be required. · Must not exceed 400 pounds in weight or 6 feet 3 inches in height, to meet physical compatibility with equipment and safety restraints. (These limitations are based on equipment specifications and the need to ensure safe operation; any reasonable accommodations will be reviewed in accordance with the Americans with Disabilities Act (ADA) and other relevant laws). TireHub will consider the employment of all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws. TireHub maintains a drug-free workplace in accordance with state and federal law.

Position Description Ryder is hiring a Class A CDL Truck Driver in Lewistown, PA — offering weekly pay, excellent benefits, and a driving career you can feel good about. See and Hear from a Ryder Employee who Drives for Us Here: https://RyderCareers.Video/ConestogaCDL You might be wondering what your paycheck will look like. $1850 weekly average - And it gets better • Driver Positions Pay Weekly, • Solo Miles Pay: $0.59 per Mile with 2000 - 2500 Miles per Week, • Van Stops Pay: $16.37 per Stop-Average 8-10 stops per week, • Safety Bonus: Pays You $250 Every Quarter, • Loyalty Bonus: Pays you $2000 at 6 months and $2000 at 1 year, • Paid Training Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call “Crystal” or text “Lewistown OTR” to 904-541-8608 to speak with your recruiter today. Choosing a driving career is a big decision. Respect for your talent and experience while being upfront about pay, routes, and schedules are priorities at Ryder. • Deliver SOLO To: From North Dakota to Texas and all states east as well as Canada., • Tractor Type: Sleepers with APUs, • Trailer Type: Dry Van and Conestoga Experience Preferred, • Companion Policy: Bring a person and/or pet on the road with you!, • Load Securement: Strapping, • Freight: Touch - Hand Unloading is Required, • Freight Type: Commercial and Residential Garage Doors, • Endorsements: Passport - Within 90 Days of Hire, • Home at least every other weekend. Ryder Drivers operate well-maintained, safe trucks, 36 months or newer with 24/7 Roadside Maintenance and fueling at over 800 nationwide maintenance locations All the benefits you expect — without the wait. • Medical, Dental & Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Uniforms, cell phone & boot allowance provided, • Drivers are the Captain — you make safety decisions, and your job is protected, • 401(k) rollover available now + company match at 1 year, • 12 weeks paid maternity leave(subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click here to see all Ryder Driving Opportunities:https://ryder-drivers.jobs/ Autonomy on the road – Support behind the scenes. When becoming a Company Driver, Ryder purchases owner operator trucks while providing support during the transition, and throughout your career. Join a team that listens, backs you up and helps you grow. Ryder is a community of proud women and men in logistics, including many Military Reservists and Veterans. Your contributions are recognized, valued, and appreciated. Let’s build futures together. Refer and get rewarded with unlimited bonuses up to $1,500 for every hired Driver. EEO/AA/Female/Minority/Disabled/Veteran Requirements • Minimum 21 years of age, • Pass a Ryder Drug Test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years, • Pass a DOT physical, • Pass a Ryder road test, • Provide appropriate CDL and endorsements for the position, • Must have Class A verifiable experience in a tractor trailer or comparable vehicle:, • 9 months experience within the past 3 years, OR, • 2 years’ experience within the last 5 years, OR, • 5 years’ experience within the last 10 years, • Ability to follow written and/or oral instructions, • Ability to read, interpret and apply laws, rules, regulations policies and/or procedures Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Ensuring compliance with applicable federal and/or state laws, regulations, and/or agency rules, standards and guidelines, • Detecting and eliminating or minimizing safety hazards Maintaining accurate records and logs, • Loading/Unloading freight or assisting in the loading/unloading of freight if required by customer, • Performs other duties as assigned Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Software Powered by ICIMS Posted Date 2 hours ago (8/12/2026 5:58 PM) Requisition ID 2026-208348 Primary State/Province NY Primary City Buffalo Location (Posting Location) : Postal Code 14214 Category Drivers Regional/OTR Solo Employment Type Regular-Full time Travel Requirements Driver Position Code 1000999

Job Description Duties & Responsibilities • Unload tools, prepare building site materials, stack building materials, and set up equipment., • Follow project instructions from construction superintendent., • Consult with construction plans and other tradesmen working on the job., • Use construction and maintenance tools and equipment to complete daily tasks., • Follow all health and safety regulations when operating equipment., • Ensure regulated and proper headgear, earplugs, gloves, safety glasses, and clothing are worn., • Complete all assigned tasks in a timely and efficient manner., • Construct temporary enclosures and structures to facilitate construction operations., • Set-up winter condition provisions., • Install steel roof top equipment supports using mechanical means (clamps in lieu of welding)., • Perform jobsite clean-up and scrap out., • Assist with project Punch List completion and close-out., • Complete floor installations, small interior paint projects and minor interior and exterior demolition projects., • Supervise Labor Ready forces when needed., • Safely operate a variety of tools including pressure washers, jackhammers, drills, saws, and grinders., • Maintain company owned equipment per manufacturers recommendations and schedule., • Ensure construction equipment and tools are cleaned and stored properly., • Fill equipment with fuel. Qualifications • Stoop, kneel, or crouch for extended periods of time., • Stand, walk, or sit for extended periods of time., • Use first aid equipment, a fire extinguisher and power and hand tools., • Lift, move and carry heavy objects., • Ability to travel when necessary., • Valid Driver's License required. Skills • Proven experience as a construction worker, related to concrete masonry, bricklayer and carpentry fields., • Experience in operating basic hand tools is mandatory. Ability to operate equipment such as skid steers and forklifts is preferred, but not mandatory., • Able to work in a team., • Able to follow instructions and self-perform tasks without constant supervision., • Very good knowledge of English (spoken and written)., • Excellent balance and eye-hand coordination., • High school diploma or equivalent. Pay Range: $25.00 - $30.00 Hourly Please note that final offer amount will be dependent on geographic location, applicable experience and skillset of the candidate.

Job Description Are you ready to kick-start your career as a full-time Plumber Apprentice in Buffalo, NY? Look no further than Zenner & Ritter! As a Plumber Apprentice with us, you'll enjoy competitive pay starting at $16-17 per hour plus commission. But that's not all – we also provide a comprehensive benefits package including: • Health, dental, and vision, • Paid time off (PTO), • 401(k) with a company match, • Life insurance, • Bonus structure, • Employee Assistance Program (EAP), • Growth opportunities, • Short- and long-term disability, • Company parties, • Company phone and uniforms, • Tool allowance, • License reimbursement Join us at Zenner & Ritter and take the first step towards a rewarding career in plumbing. Apply now and unleash your potential! WHAT YOUR DAY IS LIKE Working as a Plumber Apprentice at Zenner & Ritter means embarking on a thrilling journey of constant learning and growth. Each day begins with the anticipation of being on-call, prepared to conquer any plumbing challenges that come your way. Your willingness to lend a hand to other departments adds a dynamic element to your role, whether it involves assisting with installations or troubleshooting. Throughout the day, you dive into fundamental plumbing apprentice duties, such as mastering new techniques, collaborating with seasoned plumbers, and immersing yourself in hands-on field experience. Your unwavering commitment and fervor for the trade fuel your desire to positively impact people's lives, and you take great pride in being an indispensable member of the Zenner & Ritter team. WHO ARE WE? We have been a trusted name in home services for over 90 years, and we're continuing to grow! We're not just offering jobs-we're offering long-term careers. As the largest residential heating and cooling company in Western NY, we're expanding our services to include plumbing, electrical, energy, and green technology solutions. Whether you're interested in management, accounting, sales, customer service, or technical roles, we have opportunities for you to join a team committed to innovation and exceptional service. With flexible scheduling, excellent benefits, supportive team members, and a strong focus on career development, Zenner & Ritter is the perfect place to grow! Join us! WHAT'S NEEDED FROM A PLUMBER APPRENTICE? We're looking for someone who can work a Monday through Friday schedule from 7:30 AM to 5:00 PM and meet the following qualifications: • Valid driver's license, • Mechanical ability Plumbing experience is a plus! If you think this Plumber Apprentice job is a fit for what you are looking for, then applying is a snap. The initial application should take you less than 3 minutes to complete. Good luck! Job Posted by ApplicantPro

Kaleida Health?s mission is to advance the health of our community, and we believe our diversity, equity, and inclusion (DEI) strategic work is mission- critical for the good of our workforce and the community who need and depend on our care and services. The Physician Assistant will be available to

Job Description Qualifications -10 yrs of experience in the roofing industry with emphasis on service -Thorough knowledge of roof systems, roof system, construction, HVAC systems,exterior wall and window systems necessary -Experience with written and photographic documentation and reporting -OSHA training certifications related to roofing and manlift operations beneficial -Valid driver’s license with good driving record required Responsibilities -Perform roof system repairs for most types of commercial roof systems including (TPO, PVC, EPDM, Modified Bitumen, Built-up, Tile, Standing Seam and Shingles) -Perform general housekeeping on roof systems including removal of debris -Inspection/cleaning of roof drainage systems, inspection/documentation and minor repair of condensate lines, and of HVAC access panel -Perform limited maintenance repairs to exterior walls & sheet metal flashing -Perform limited ceiling tile replacement/ceiling repair -Investigate reported leaks and determine sources of leaks from tenants and property managers to obtain details of reported problems and provide specific information relevant to the repairs -Conduct pre and post-storm inspections of roof systems to document and respond to conditions -Coordinate/Conduct quarterly roof condition surveys and additional properties, document existing conditions with text and photos -Perform periodic site visits to inspect and document new roof construction progress, quality and coordination of work -Meet with roofing contractors to review scope, progress and quality of work -Perform punch list inspections of completed work -Coordinate roof penetration work associated with new tenant buildouts -Coordinate roof and flashing work related to building facade renovation -Document and communicate tenant required HVAC maintenance

Job Description Overview Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland’s culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect. Wieland is hiring a General Helper. The General Helper will be responsible for executing a wide range of operational and support duties within the manufacturing facility, including equipment operation, material handling, and general labor. This position plays a key role in maintaining productivity, ensuring product quality, and supporting safety and continuous improvement initiatives. This role is located in Buffalo, NY and will be fully on-site. Hourly Pay Range: $26.75 Work Schedule: 6am-4pm, 4pm-2am Monday-Thursday Pay Schedule: Weekly At Wieland, we recognize that attracting the best talent is key to our strategy and success as a company. As a result, our ranges reflect our good faith estimate to pay fairly. The final pay offered to a successful candidate will be based upon various factors unique to each individual that may include but are not limited to years of experience, industry knowledge, technical skills, education, qualifications, etc. Responsibilities General Helper Responsibilities: • Provide flexible operational support across the facility by filling in for absent personnel or unassigned roles as needed., • Perform a variety of production tasks primarily within the lower end of the mill, supporting copper and copper alloy processing operations., • Operate equipment and perform duties such as Operator, Helper, Inspector, and slitter operator., • Safely operate mobile and heavy equipment as required., • Execute physically demanding tasks, including heavy manual labor in a fast-paced industrial environment., • Load, move, and handle raw materials and byproducts such as gravel, scrap, or metal chips., • Perform job duties that may require bending, lifting, carrying, climbing, and working in confined spaces or at elevated heights., • Transition into assigned roles based on operational needs, seniority bidding, or management direction., • Perform a wide range of bargaining unit job functions to support plant operations and workforce flexibility., • Monitor product quality and make real-time decisions when necessary to address quality concerns and ensure compliance with specifications., • Actively participate in continuous improvement initiatives aligned with ISO 14001, ISO 45001, and ISO 50001 standards., • Contribute to workplace safety and operational excellence by engaging in near-miss reporting and improvement programs. General Helper Qualifications: • Prior experience in a manufacturing, industrial, or heavy production environment preferred., • Ability to perform a wide range of job functions with minimal supervision in a fast-paced setting., • Demonstrated flexibility and willingness to work in various roles and departments as needed., • Ability to safely operate industrial equipment, including mobile and heavy machinery., • Strong attention to detail with the ability to identify and address product quality issues., • Good judgment and decision-making skills, particularly in situations involving safety or production quality., • Ability to perform physically demanding work, including lifting, carrying, bending, climbing, and working in confined spaces or at heights., • Willingness to work in varying environmental conditions (heat, cold, noise, dust, etc.) typical of a mill environment., • Basic understanding of workplace safety practices and commitment to following all safety policies and procedures., • Ability to follow verbal and written instructions and adhere to standard operating procedures., • Strong teamwork skills with the ability to support multiple departments and work collaboratively with others., • Reliability and dependability, including good attendance and the ability to respond to changing work assignments., • Willingness to participate in continuous improvement efforts, including safety and environmental programs. Qualifications Joining Wieland’s team gives you… • Benefits - Including Medical, Dental, Vision, Disability, Life & more!, • Retirement Savings - 401(k) employee contribution + pension plan., • Work/Life Balance - Paid Vacation & Holidays., • Growth Opportunities - We have over 9,000+ employees worldwide and 40+ locations in North America alone. Growth opportunities are limitless!, • Wellness Programs – Wieland encourages participation in our unique and personalized approach to wellness, where you are eligible to earn healthcare premium discounts as well as HSA employer contributions based on your status within the program., • Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations. Wieland is an equal opportunity and affirmative action employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees. Come join Wieland today and help us continue to build a global corporation we are all proud to belong to.

Job Description Come work with the best! At Maine Drilling & Blasting we work with the unity of family and the determination of business owners. As a majority Employee Owned company we provide a unique and generous array of benefits including two retirement plans, an Employer-contributed Stock Ownership Plan (ESOP) and company matched 401(k). In addition to health, dental, vision, life, and disability benefits, we also offer training and development opportunities. The sky is the limit, come rock your career at MD&B! Our core values of Respect, Fairness, Honesty, and Responsibility provide a firm cultural foundation as we relate to customers and each other as we Make it Happen! LICENSED BLASTER- Pay: Salary DOE plus company vehicle. Performs blasting activity in accordance with job program to achieve anticipated production. This position supports the direction of the Blasting Supervisor and Project Superintendent. Reports blasting results and status to Project Superintendent or Blasting Supervisor for input and direction. Responsibilities: • Performs assigned blasting activities., • Works as a job site blaster and receives direction from Blasting Supervisor and/or Project Superintendent, • Provides input on blast-related activities to aid direct supervisor in plans, • Identifies blast site problems and resolves with Blasting Supervisor or Project Superintendent, if necessary, • Verifies that pre-blast inspections have been conducted prior to blasting, • Performs all necessary pre-blast tests and seismograph setup as needed, • Understands and follows all Company safety policies and practices, • Places supply and material requests through Blasting Supervisor or Project Superintendent as needed, • Monitors the relationship between blast pattern and type of digging and reports results to Blasting Supervisor or Project Superintendent, • Documents use of explosives and completes required inventory paperwork, • Expected to transport explosives across state lines, as needed, • Is responsible for completing field accounting reports and required trip manifest forms as needed, • All other duties as assigned, • Attends company meetings as required, • Participates in daily heads up safety meetings Qualifications High School Degree Minimum of two years experience working with drills and explosives Must have completed Blaster I training and will be required to take Blaster II training Possess a Valid Blasting Certificate in states that require this Must have good communications skills Must hold a valid CDL with hazmat endorsement and is a Company-qualified driver (able to transport explosives across state lines) and has a good driving record as defined by the Company insurance carrier Out of town/state travel Must successfully pass ATF screenings Has a thorough understanding of blasting techniques: blast design, loading holes, select and operate electric and non-electric detonators, demonstrate grade & elevation readings, secure blast site, identify explosives, demonstrate pop shooting Proficient in all areas of drill operations Physical Requirements • Ability to perform essential functions of the position, • Ability to lift 50 lbs., 30 - 40% of the time, • Work on uneven and loose surfaces in varying weather environments, • Stooping and bending 30 – 40% of the time Skeptical about advancement opportunities? Check out these videos: • Dante (CST) talks about what it’s like to work at MD&B: https://www.youtube.com/watch?v=zrSWPW4Qbgo, • Dan (CEO) talks about career advancement opportunities: https://www.youtube.com/watch?v=gvloIft9KPY Does this sound like you? If it does, then go ahead and hit that APPLY button because we cannot wait to meet you!

At UnitedHealthcare, we're simplifying the health care experience, creating healthier communities and removing barriers to quality care. The work you do here impacts on the lives of millions of people for the better. Come build the health care system of tomorrow, making it more responsive, affordable, and equitable. Ready to make a difference? Join us to start Caring. Connecting. Growing together. \n Working under the direction of the Essential Plan (EP) Sales & Account management and collectively with the Business Development and Community Outreach team, the Sales Account Manager will interface with New York Health Plan to increase marketing synergy and drive overall membership growth. The EP Account Manager is a field-based role that establishes and cultivates strategic business relationships with key sales and market influencers, potential new customers, and related community institutions. The Essential Plan is for New Yorkers between the ages of 19-64. This position requires someone with tenacity to perform sales activities both indoors and outdoors. Function identified will be new Business to Business (B2B) opportunities for the purpose of prospecting and enrolling new Essential Plan eligible including vertical channels (dental, vision, fitness, colleges, trade schools, small businesses, as well as industry sectors identified by your manager) that support EP Growth strategy in key areas in New York. Training on all government programs will be conducted upon hire. \n If you reside in Erie County, NY or surrounding areas, you'll enjoy the flexibility to telecommute* as you take on some tough challenges. \n Primary Responsibilities: \n\n • Enroll eligible members in UHC Essential Plan\n, • Build and foster relationships with key accounts (provider offices, CBOs, housing, etc.)\n, • The EP Account Manager presents health plan information to providers, business advocacies, potential eligible and responsible for closing sales\n, • Serve as point of contact for members to provide excellent service and enrollment experience\n, • Lead pipeline management\n, • Responsible for meeting or exceeding sales and enrollment expectations within assigned territory\n, • Conduct product information presentations in multiple settings, including in-home consultations\n, • Function independently and responsibly with minimal need for supervision\n, • Track and measure various sales event effectiveness and activities, events, leads & leads progress, sales, appointments, contacts, and relationship progress daily through internal systems\n, • Provide input, support and feedback on promotional opportunities, benefits, and other issues\n, • Stay informed on UHC operations, provider network, premiums, member services, claims, explanation of benefits, processes and other services and issues to provide community partners, prospects, and members with accurate information, and provide feedback as appropriate\n, • Ability to manage multiple priorities including visiting provider offices on a regular basis and following up on leads in a timely fashion\n, • Ability to track a schedule to keep appointments on time and information pertaining to those appointments in timely manner\n, • Input consumer demographics and interactions into company systems as appropriate\n, • Performs other duties as required\n\n Demonstrated Skills: \n\n • Execute excellent communication, interpersonal, time management and organizational skills\n, • Excellent relationship building skills\n, • Ability to be compassionate while selling\n, • Function independently and responsibly with minimal need for supervision\n, • Ability to manage multiple priorities as it relates to meeting enrollment goals \n, • Ability to communicate complex healthcare information to potential clients\n\n You'll be rewarded and recognized for your performance in an environment that will challenge you and give you clear directions on what it takes to succeed in your role as well as provide development for other roles you may be interested in. \n Required Qualifications: \n\n • High School Diploma/GED\n, • Marketplace Certified (Valid NYSOH Certified Application Counselor ID - CAC). If you do not have an active CAC ID or if the ID is not in good standing, you must be willing to obtain this ID within 30 days of hiring\n, • 2+ years of business-to-business (B2B), Business to consumer (B2C) Direct marketing, outside sales or community outreach experience\n, • Intermediate level of proficiency with MS Office (Outlook, Word, Excel, PowerPoint) and CRM (Salesforce) \n, • Ability to travel locally up to 100% of time within assigned sales territories in this NY market area\n, • Ability to work core business hours, Monday - Friday 8am-5pm and nights and weekends, when required\n, • Reside within/commutable distance of their target geography\n, • Access to reliable transportation and valid US driver's license with current automobile insurance and good driving history\n\n Preferred Qualifications: \n\n • Bilingual preferred (Russian, Spanish, English, Arabic, French, etc.)\n, • Established professional relationships with non-profits, community sources CBO's, religious/faith-based organizations FBO's in designated sales territory\n, • Experience working with communities of all different ethnicities, cultural backgrounds, diverse populations and/or underserved communities\n, • Demonstrated knowledge of Essential Plan Market Place marketing rules and regulations preferred, training in all lines of businesses will be provided \n, • Previous outside sales and territory management experience\n, • Act as a team player - work collaboratively with others (both inside the sales unit as well as outside) to achieve goals, relate to others in an open and accepting manner, keep others up to date on information they need, contribute ideas and support decisions made by the team and the organization, treat people with dignity and respect\n, • Insured and dependable vehicle\n\n *All Telecommuters will be required to adhere to UnitedHealth Group's Telecommuter Policy. \n \n Pay is based on several factors including but not limited to local labor markets, education, work experience, certifications, etc. In addition to your salary, we offer benefits such as, a comprehensive benefits package, incentive and recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). No matter where or when you begin a career with us, you'll find a far-reaching choice of benefits and incentives. The hourly pay for this role will range from $19 - $38 per hour based on full-time employment. We comply with all minimum wage laws as applicable. \n \n At UnitedHealth Group, our mission is to help people live healthier lives and make the health system work better for everyone. We believe everyone-of every race, gender, sexuality, age, location, and income-deserves the opportunity to live their healthiest life. Today, however, there are still far too many barriers to good health which are disproportionately experienced by people of color, historically marginalized groups, and those with lower incomes. We are committed to mitigating our impact on the environment and enabling and delivering equitable care that addresses health disparities and improves health outcomes - an enterprise priority reflected in our mission. \n \n \n UnitedHealth Group is an Equal Employment Opportunity employer under applicable law and qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, or protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. \n \n UnitedHealth Group is a drug-free workplace. Candidates are required to pass a drug test before beginning employment. \n \n \n #RPO #RED

Job Description SUMMARY: This position is responsible for completing tasks such as: wiring electronic components, wiring to strain gauges, electrical module installation and assembly, through-hole and surface mount component soldering of components on PCBs; inspecting your work; making adjustments to correct difficulties; performing basic electrical checks; using precision measuring instruments to verify work quality; working from detailed drawings, work instructions, specifications and production control documents. This position is also responsible for quality, training, work distribution, and continual improvement. DUTIES AND RESPONIBILITIES: • Works in a manner that meets or exceeds established effectivity goals of the facility., • Manufactures high-quality products meeting quality specifications and workmanship standards., • Performs the following tasks:, • Wiring:, • Wiring to strain gauges., • Wiring to electronic components and feed throughs., • Electronics:, • Electrical module installation and assembly., • Simple mechanical assembly., • Resistor winding and assembly., • Electronic component installation., • Electrical harness wiring and cable construction., • Modules:, • Through-hole component soldering of components on PCB’s., • Surface mount component soldering of components on PCB’s., • Inspects own work and makes adjustments to correct difficulties., • Performs basic electrical checks and use precision measuring instruments to verify work quality., • Works from detailed drawings, work instructions, specifications, and production control documents., • Possesses basic computer skills; performs data entry for production reporting and attendance and retrieves information electronically., • Ensures proper waste disposal procedures are followed for handling residual and/or hazardous waste., • Places waste in the properly labeled container(s)., • Follows safety procedures; uses proper PPE; attends training and reports any spills., • Works safely, performs required housekeeping tasks, and actively participates in all plant safety directives while adhering to all safety guidelines and procedures., • Participates in continuous improvement activities., • Ability to work overtime., • Performs other related duties as assigned by management.SUPERVISORY RESPONSIBILITIES:, • This position has no supervisory responsibilities.QUALIFICATIONS:, • High school diploma or general education degree (GED), or one to three months related experience and/or training, or equivalent combination of education and experience., • Attain J Standard Certification during 1st year of employment., • 3 – 5 years of experience or capable in wiring strain gauge or assembly of one product type., • Ability to learn and apply basic technical concepts., • Able to communicate effectively with management and co-workers to promote strong working relationships and create an environment focused on teamwork., • Flexible with work and job assignments and willing to perform any function as needed., • Possess basic computer skills including database software and electronic mail software., • Must have 20/20 vision with correction, and no color blindness, steady hands with good dexterity. (Company issued annual eye exam.)PHYSICAL DEMANDS AND WORK ENVIRONMENT:, • Moving self in different positions to accomplish tasks in various environments including tight and confined spaces. ☐ Never ☐ Occasionally ☒ Constantly • Remaining in a stationary position, often standing or sitting for prolonged periods. ☐ Never ☐ Occasionally ☒ Constantly • Moving about to accomplish tasks or moving from one worksite to another. ☐ Never ☐ Occasionally ☒ Constantly • Adjusting or moving objects up to 50 pounds in all directions. ☐ Never ☒ Occasionally ☐ Constantly • Communicating with others to exchange information. ☐ Never ☐ Occasionally ☒ Constantly • Repeating motions that may include the wrists, hands and/or fingers. ☐ Never ☐ Occasionally ☒ Constantly • Assessing the accuracy, neatness and thoroughness of the work assigned. ☐ Never ☐ Occasionally ☒ Constantly • Sedentary work that primarily involves sitting/standing. ☐ Never ☐ Occasionally ☒ Constantly • Noisy environments. ☐ Never ☒ Occasionally ☐ Constantly ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders. EOE/M/F/Veteran/Disability. Stellar Technology is a Diverse Work Force Employer.

Job Description HISTORY: Advanced Alarm, Inc. was established in 1989 to provide WNY residents and businesses with custom security solutions and home entertainment products. We were selected by Honeywell Security to be part of their First Alert Dealer Network of approximately 200 companies' nationwide to install and service Honeywell Security systems. We are the only authorized security and home theater company selected by the Buffalo Bills. Advanced Alarm, Inc. is a family owned and operated business that promotes family values. POSITION: We are seeking an experienced security/AV technician to join our growing team. We work in a fast-paced environment and hold every member of our team to the high standards we have established to service our clients. The successful candidate must be goal oriented, motivated, organized, have a good sense of humor, and above all be honest. REQUIREMENTS: Must Have previous security and or AV installation experience Familiar with Honeywell, DMP, Speco, Dahua, DSC programming and installation Mechanically inclined High school diploma or equivalent Clean driver's license Pass a background check Computer skills and networking WE OFFER: Pay range based on experience and certifications. Paid vacations, holiday pay, health insurance, life insurance, and a contributing retirement account. \nCompany Description Advanced Alarm, Inc. was established in 1989 to provide Western New York Residents and businesses with custom security and home entertainment products. We were selected by Honeywell Security to be part of their First Alert Dealer Network of approximately 200 companies nationwide to install and service Honeywell Security systems. Advanced Alarm, Inc. is a family owned and operated business that promotes family values. Advanced Alarm, Inc. was established in 1989 to provide Western New York Residents and businesses with custom security and home entertainment products. We were selected by Honeywell Security to be part of their First Alert Dealer Network of approximately 200 companies nationwide to install and service Honeywell Security systems. Advanced Alarm, Inc. is a family owned and operated business that promotes family values.

Job Description Job Title: Part-Time Dentist Location: Surrounding Buffalo, NY Company: DentServ We are a growing multi-location dental practice looking for Part-Time Dentists to join our team! Enjoy flexible scheduling and a stress-free work environment. We handle the management side, so you can focus solely on practicing dentistry. All support staff, supplies, labs, and equipment are provided. Qualifications: • DMD/DDS degree from an accredited dental program, • Current, unrestricted NYS dental license in good standing, • Strong chairside manner and excellent communication skills, • Ability to work effectively with the dental team, • Available to work 1-4 weekdays per monthResponsibilities:, • Perform general dental procedures including examinations, treatment planning, x-rays, oral prophylaxis, scaling, fillings, simple extractions, and more, • Maintain accurate EMR documentation, • Supervise and support the dental teamBenefits:, • Competitive pay ($175,000 - $225,000 per year), • Flexible schedule to support work/life balance, • Sign-on bonus and colleague referral bonuses, • Friendly, supportive work environment If you're passionate about patient care and want a flexible part-time opportunity, apply today to join our growing team! Powered by JazzHR X1VB3DM8t4

Job DescriptionPhysical Therapist Assistant - PRN Available weekdays and weekends, coverage for PTO We are looking for an attentive physical therapist assistant to help physical therapists with their sessions. The physical therapist assistant is responsible for massaging patients, sanitizing treatment areas, and setting up therapy equipment. To be successful as a physical therapist assistant you must have excellent interpersonal skills. A good physical therapist assistant has the strength to lift and move patients with mobility problems. Physical Therapist Assistant Responsibilities: Answer phone calls. Schedule appointments. Follow instructions provided by physical therapist. Massage and stretch muscles where necessary. Set up therapy equipment. Sanitize therapy area. Lift or move patients. Monitor patients during sessions. Guide patients through exercises where necessary. Brief patients and their families on after-therapy care. Physical Therapist Assistant Requirements: Certification from a physical therapist assistant program. Valid physical therapist assistant license. A high school qualification or equivalent. Excellent interpersonal skills. Ability to lift and move patients. Computer literacy skills.

Job Description Board Certified Behavior Analyst We are seeking a Board Certified Behavior Analyst (BCBA) to provide remote Applied Behavior Analysis (ABA) services to children and families across multiple states. In this role, you will conduct assessments, develop and oversee individualized treatment plans, supervise behavior technicians, and collaborate with caregivers to support meaningful and measurable progress. Responsibilities • Conduct behavioral assessments and develop individualized ABA treatment plans, • Provide clinical supervision and guidance to behavior technicians implementing programs, • Monitor client progress and adjust treatment plans as needed, • Collaborate with caregivers and multidisciplinary teams to support treatment goals, • Maintain accurate documentation and ensure services align with ethical and clinical standards Qualifications • Active BCBA certification in good standing, • Master’s degree in Behavior Analysis, Psychology, Education, or a related field, • Experience providing ABA services to individuals with autism or developmental disabilities preferred, • Strong communication and organizational skills What We Offer • Fully remote position with flexible scheduling, • No minimum or maximum caseload requirements, • No non-compete agreements, • LBA Expansion Program with support and reimbursement for additional state licensure, • A dedicated BCBA Success Manager to provide ongoing support and help ensure clinical and professional success

Job Description Now Hiring Ultrasound Technologists for PRN Weekend Shifts! New grads are welcome to apply! PDI Health is a leading mobile diagnostic imaging provider serving nursing homes, assisted living facilities, and private residences. At PDI Health, we combine clinical excellence with compassion—supporting our technologists while empowering them to work autonomously in the field. Summary: The Ultrasound Technologist is responsible for performing high-quality diagnostic ultrasound examinations in various long-term care settings. This position is mobile and requires independent scanning experience, strong clinical judgment, and excellent patient care and communication skills. Essential Duties: • Drive between facilities during assigned shift with company provided vehicle., • Maintain patient safety and comfort, delivering exceptional patient care during every exam., • Perform accurate, high-quality diagnostic ultrasound exams per physician orders and clinical protocols., • Operate ultrasound equipment while maintaining compliance with safety and infection control standards., • Consistently produce clear, accurate images and complete documentation with attention to detail.Qualifications:, • Graduate of an accredited Diagnostic Medical Sonography program., • ARDMS or CCI registry (minimum of one) or willing to obtain within 6 months., • Post-graduation experience performing independent ultrasound scanning in both General and Vascular (Venous. Arterial, and Carotid) studies preferred., • Valid driver’s license and good driving record. Benefits: • Competitive compensation, • Company vehicle with gas and toll coverage, • Full Benefits Package for Eligible Employees – Medical, Dental, Vision, Life Insurance, PTO, Holidays, and 401k.#NYUS Powered by JazzHR FsyvSk60YE

Job Description Inspire Dental Group, supported by The Smilist Dental, is looking for a compassionate and skilled General Dentist ready to take on an excellent opportunity at our Downtown Buffalo dental practice. Providers enjoy full clinical autonomy to treat patients. The practice is modern with advanced technology that offers an exceptional experience to every patient, with teamwork culture second to none. Productive schedules and increased patient flow allows our dentists to focus on providing the best quality of care to each and every patient. About The Practice ● Loyal FFS/PPO Patient Base ● Multi-Specialty Practice ● Apply today and during our discussion we can ensure that we find the right practice and position for you. General Dentist Benefits: ● $250,000-400,000 Annual Income Potential ● Up to 10 CE credits a year through our exclusive Continuing Education ● Company-sponsored 401k with Company Match ● Malpractice Insurance Reimbursement (Full-Time Employees Only) Preferred Education and Experience: ● Minimum of 1 year of Clinical Experience ● DDS or DMD from an accredited university, active NY license in good standing, and active/in process DEA license ● Broad Scope General Dentistry ● Ethical patient-centric provider ● Coachable, Team-Oriented ● Great work ethic, motivated for success Powered by JazzHR K6yqyw1kPA

Job Description Full time or Part time Join our outstanding team of professionals. We are looking for a Clinical Research Study Coordinator to work as part of our research team. We provide 401k with match, free skin center services, scrubs, generous paid time off, 6 paid holidays, life insurance, long and short-term disability insurance and partial payment of health, dental and vision insurance with a Health Savings account and periodic bonuses. FLEXIBLE SCHEDULE and NO MAJOR HOLIDAYS! Responsibilities: • Running clinical trials for various protocols with a diverse set of disease entities., • Complete necessary tasks to effectively and efficiently provide safe, quality care in order to facilitate optimal clinical research trial outcomes for research participants and sponsors, • Understanding and implementing clinical protocols, • Undertaking all necessary research certification courses (provided by site and sponsor), • Administering informed consent as delegated by Principle Investigator, • Problem-solving, call patients on abnormal test results, • Development and utilization of study source documentation, • Administer prescribed medications injections, ECGs, CGM's Skills: • Knowledge and or capability to adhere to research regulations, and procedures to administer relevant research related patient care., • Knowledge of computer and electronic applications., • Collection of blood samples, • Development of screening and recruitment materials, • Ability to undertake a variety of diverse care tasks and work in a multidisciplinary team, • Good physical condition and stamina Job Type: Full Time or Part time Pay: $54,000-$84,000 per year based on license and qualifications and research experience Related keywords: LPN, RN, registered nurse, nurse, research, research coordinator, nurse rn, research nurse research \nCompany Description We are a practice that knows that integrity is the key to our success. Without a doubt, we have the highest quality of providers and staff. We are a practice that knows that integrity is the key to our success. Without a doubt, we have the highest quality of providers and staff.

Job DescriptionDaemen University is a dynamic, independent, liberal arts institution committed to excellence in student centered learning. The University places special emphasis on preparing students for excellence in professional life, civic engagement, and on instilling and understanding that learning is an exciting lifelong journey. Students are encouraged to be creative, innovative, ethically minded leaders for an ever-changing, diverse, and interconnected world.Purpose of RoleThe purpose of this course is to provide an overview of current research and practice in the field of Organizational Behavior Management (OBM). OBM is a subspeciality of behavior analysis, applying the science to organizational concerns such as training, safety, productivity and quality in the workplace. Students will also learn to identify effective leadership and supervision methods for the workplace or their professional practice. Prerequisite: ABA 604 and ABA 606. This position includes: Teaching in the ABA MS and Advanced Certificate graduate programs in the in-person/HyFlex modality, and communicating effectively with a diverse population of students.ABA 612: Organizational Behavior ManagementRequirementsMaster's Degree in Behavior Analysis or related field and Board Certified Behavior Analyst and Licensed Behavior Analyst in NY in good standing. PhD in Behavior Analysis or related field is preferred. At least 3-5 years of full-time Clinical Practice. Teaching experience in behavior-analytic graduate programs is preferred.The ideal candidate will have expertise in clinical application across multiple areas of behavior analysis and with multiple learner characteristics, and the ability to develop effective behavior-analytic programs for people in need of services.The mission of Daemen University is to prepare students for life and leadership in an increasingly complex world. Daemen University is an independent, nonsectarian, comprehensive university located in Amherst, a first-ring suburb of Buffalo, New York.For consideration, apply directly at https://daemen.applicantpro.com/jobs/ and upload your CV, letter of interest, and contact information for three professional references.Daemen University is an AA/EOE and strongly encourages applications from women, veterans, people of color, individuals with disabilities, and candidates who will contribute to and support the cultural fluency and diversity of our campus.Review of applicants begins immediately and continues until the position is filled. Job Posted by ApplicantPro

Job Description Position Summary Physical Therapist in a Skilled Nursing Facility located in Williamsville , NY. Spacious environment and a strong, supportive team. Responsibilities include assistance with ensuring the health and well-being of residents by providing physical therapy evaluations and treatments based upon assessment. New York State certification required. Qualifications · New York State Department of Education Certification and license to practice as a Physical Therapist in New York State required. · Ability to relate well to residents and enjoy working with the elderly people necessary. · Tact and diplomacy; ability to develop good relationships with residents, staff and students required. · Ability to inspire and motivate others and create a warm and accepting climate for residents necessary. · Qualities of maturity, diplomacy, ability to work well with others required. · Ability to communicate well verbally and in writing required. · Ability to supervise departmental staff effectively and ensure that high standards of care are maintained. · Ability to perform tasks to established standards of excellence required. · Demonstrated willingness to uphold the vision and mission of the company by following the core values of Integrity, Teamwork, and Passion for Excellence and Reverence for the Individual Join our team of highly experienced therapists in providing excellent, comprehensive care! Competitive wage and benefits included. “We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.”

Job DescriptionJob Title: Mechanical EngineerLocation: Buffalo, NY Hire Type: Direct HirePay Range: $85,000 - $105,000Work Type: Full-timeWork Model: OnsiteWork Schedule: Monday – Thursday, 6am – 4pmRecruiter Contact: Sean Pebbles, 716-256-1259, spebbles@imaginestaffing.netNature & Scope:Positional OverviewThe Imagine Group is recruiting for a Mechanical Engineer on behalf of our client, a leading global manufacturer and supplier of high-performance copper and copper-alloy materials in Buffalo, NY, supporting a wide range of industries including automotive, electronics, and energy. The organization operates advanced production facilities that manufacture strips, sheet, and other semi-finished metal products used in electrical components, heat exchangers, and industrial applications. Known for its focus on innovation and sustainable manufacturing, the company partners with customers to deliver reliable materials that support modern infrastructure and emerging technologies. In this role, you will be responsible for designing, maintaining, and improving mechanical systems and equipment used in manufacturing operations. You will analyze production processes, troubleshoot mechanical issues, and implement engineering solutions that enhance efficiency, reliability, and safety. Additionally, you will collaborate with maintenance and production teams to support equipment upgrades, preventative maintenance strategies, and continuous improvement initiatives.Role & Responsibility:Tasks That Will Lead to Your Success • Engineer and design modifications to existing equipment to improve production and reduce maintenance costs., • Direct and coordinate major overhauls and rebuilds to improve quality and yield. Maintain minimum downtime and production delays., • Communicate and coordinate equipment maintenance requirements and activities with the maintenance department regarding manpower and downtime requirements, acquiring input form equipment operators and maintenance staff., • Oversee preventive maintenance activities, such as long-range planning to ensure maximum production and utilization of production equipment., • Coordinate with contractors on design and implementation of new equipment regarding required maintenance and replacement parts to ensure optimal utilization and longevity of equipment., • Maintain equipment to comply with local, state and federal government and insurance company regulations., • Direct and coordinate bargaining unit employees as required. Promote safe and healthy workplace. Ensure optimal labor relations by adhering to the contract and Company policies. Maintain good housekeeping and organization within the department.Skills & ExperienceQualifications That Will Help You Thrive, • Participate in continuous improvement of ISO 14001, ISO 45001, ISO 50001, 9001, IATF 16949 programs and procedures though active participation in the near miss program., • Handles containerizing and labeling universal wastes including batteries and lamps, as well as spent aerosol cans (HW)., • 5 years’ experience, • BS Degree- Mechanical Engineering