Building maintenance jobs in Houston, TexasCreate job alerts

This position is a full-time day shift role and works three, 12-hr shifts on Tue, Wed, and Fri from 6:30am-7:00pm, plus call. At Houston Methodist, the Charge Nurse position is a licensed professional Registered Nurse (RN), who, as an experienced clinician, functions at the Competent to Proficient stage of Benner's model of clinical practice. This position creates an environment for the management and delivery of safe patient care. In addition to fulfilling the duties and responsibilities of a clinical nurse, the Charge Nurse position is a role model and coach to department personnel and assists in developing their skills and knowledge. This position provides nursing care to a diverse patient population. Besides conducting nursing assessments, assisting with exams and treatment and maintenance of medical records, this position assists in coaching and mentoring department staff in areas of clinical and professional practice. Role modeling compassionate communication with physicians and the interprofessional health care team, the Charge Nurse assumes leadership responsibilities with high level contributions at the bedside, unit, service line, and across the institution. Responsibilities for this position may include but are not limited to leading unit and shared governance activities, assessing unit needs related to practice and improvement opportunities, serving as a clinical resource for both unit and hospital staff and coordinating unit and hospital-wide education in partnership with management. FLSA STATUS Non-exempt QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure - must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association Preferred, • Magnet - ANCC Recognized Certification, • ACLS - Advanced Cardiac Life Support or Instructor (AHA) SKILLS AND ABILITIES • Demonstrates the skills and competencies necessary to safely perform the assigned job, determined through ongoing skills, competency assessments, and performance evaluations, • Sufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or security, • Ability to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principles, • Strong assessment, organizational and problem solving skills as evidenced by capacity to prioritize multiple tasks and role components, • Ability to function independently and exercise judgment in interactions with physicians, interprofessional healthcare team and patients and their families, • Uses critical thinking skills and clinical judgment to work autonomously as defined by the Nurse Practice Act, • Demonstrates proficient time management skills, • Demonstrates highly developed assessment skills; contributes to policies, procedure and protocols, • Has knowledge of Nursing Unit’s Dashboard and Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS) scores, • Demonstrates expertise in operating the electronic medical record, • Maintains level of professional contributions as defined in Clinical Career Path program guide ESSENTIAL FUNCTIONS PEOPLE ESSENTIAL FUNCTIONS • Fosters staff engagement by demonstrating active listening, requesting and acknowledging feedback, making equitable decisions, providing rationale when appropriate, and supporting organizational goals. Anticipates the needs of the staff members and proactively offers assistance. Role models inter-professional communication, which includes active listening and teaching, and assists with staff stress management as needed. Improves departmental scores for turnover/retention on unit-based scorecard., • Role models fair and consistent leadership skills for effective team dynamics and team building strategies through problem solving, coaching, and developing staff. Coaches staff to use efficient and effective communication to establish and maintain a team environment, and to include the patient and family as a part of the team regarding their plan of care. Provides input into staff performance reviews, as appropriate., • Functions as a mentor and resource to unit staff, provides oversight for students/new employee/preceptorships. Identifies levels of organizational conflict and applies tools to effectively resolve concerns, complaints or conflict with patients, families, physicians and other inter-professional healthcare team members. SERVICE ESSENTIAL FUNCTIONS • Leads the patient and family-centered care standards, as outlined in the Houston Methodist Professional Nursing Practice document. Mentors others regarding specialty populations; audits plan of care., • Maintains ongoing interactions with patients, families, and staff on the improvement of patient care through leader rounding. Ensures effective collaboration with other departments regarding patient process issues., • Drives department service standards and activities to improve department score for patient satisfaction on unit-based scorecard, through role modeling and fostering accountability. QUALITY/SAFETY ESSENTIAL FUNCTIONS • Models the standards of care related to the nursing process, as outlined in the Houston Methodist Professional Nursing Practice document, by actively participating in meeting and improving nurse sensitive quality indicators and patient safety goals. Participates in the creation of a continuous improvement environment by promoting situational awareness, assisting with audits as needed, and using teachable moments., • Coordinates nursing care throughout the shift considering patient acuity, staff skill level and safety to ensure that our duty to our patients can be met. Models the standards related to regulatory requirements and professional practice as outlined in the Houston Methodist Professional Nursing Practice document., • Facilitates seamless patient flow to/from/through the department, leading the delivery of quality family-centered care throughout the continuum of care. Ensures the patient plan of care is accurate and timely, coaching staff if documentation deficiencies are identified. Works closely with the OAs and bed management regarding timely patient placement. Proactively recognizes, determines a plan of action, and responds to situations, such as Rapid Response/CERTs, and emergency codes., • Participates in initiatives to improve quality and safety scores on the unit and hospital scorecards, through peer-to-peer accountability, reporting near misses and identifying solutions by collaborating with the interprofessional team. Role models situational awareness, using teachable moments to improve safety. Assists with audits as needed. FINANCE ESSENTIAL FUNCTIONS • Implements department strategies to achieve financial target on unit-based scorecard and mentors others to do the same through timely documentation of care, decreasing length of stay, optimizing efficiency, minimizing incidental overtime, and other areas according to departmental specifications., • Attends daily care coordination rounds to facilitate patient progression. Ensures that follow-up has been implemented on any concerns or issues identified by the team. Manages productivity in accordance with staffing grid., • Provides input into unit resource utilization including unit capital and operational budget needs. Oversees shift by shift resource utilization through the allocation of staff, supplies and contributions to the patient throughput. GROWTH/INNOVATION ESSENTIAL FUNCTIONS • Fosters identification and implementation of innovative solutions for practice changes to improve patient care or unit operations such as reduction of hospital readmissions or other department-specific measures by leading and/or participating in unit projects and shared governance activities. Investigates and incorporates evidence-based practices which are presented to shared governance and leadership. Supports change initiatives and adapts to unexpected changes., • Expands individual nursing knowledge and coaches staff to grow in knowledge, abilities, skills, and attitudes. Serves as clinical resource. Develops and disseminates, as appropriate, informational/educational resources and programs designed to improve quality and professional practice. SUPPLEMENTAL REQUIREMENTS WORK ATTIRE • Uniform: Yes, • Scrubs: Yes, • Business professional: No, • Other (department approved): No ON-CALL* *Note that employees may be required to be on-call during emergencies (ie. Disaster, Severe Weather Events, etc) regardless of selection below. • On Call* Yes TRAVEL** Travel specifications may vary by department • May require travel within the Houston Metropolitan area Yes, • May require travel outside Houston Metropolitan area No QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure - must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association Preferred, • Magnet - ANCC Recognized Certification, • ACLS - Advanced Cardiac Life Support or Instructor (AHA) Company Profile: Houston Methodist Willowbrook Hospital is a Magnet-recognized, not-for-profit, faith-based hospital that serves the growing Northwest Houston community. We are committed to providing quality, cost-effective health care in a compassionate environment for a full range of services, including emergency care, cardiology, orthopedics and sports medicine, comprehensive women’s services, neurology and neurosurgery, oncology, and primary and general medicine. Houston Methodist is an Equal Opportunity Employer.

At Houston Methodist, the Charge Nurse position is a licensed professional Registered Nurse (RN) who, as an experienced clinician, functions at the Competent to Proficient stage of Benner's model of clinical practice. This position creates an environment for the management and delivery of safe patient care. In addition to fulfilling the duties and responsibilities of a clinical nurse, the Charge Nurse position is a role model and coach to department personnel and assists in developing their skills and knowledge. This position provides nursing care to a diverse patient population. Besides conducting nursing assessments, assisting with exams and treatment and maintenance of medical records, this position assists in coaching and mentoring department staff in areas of clinical and professional practice. Role modeling compassionate communication with physicians and the interprofessional health care team, the Charge Nurse assumes leadership responsibilities with high-level contributions at the bedside, unit, service line, and across the institution. Responsibilities for this position may include but are not limited to leading unit and shared governance activities, assessing unit needs related to practice and improvement opportunities, serving as a clinical resource for both unit and hospital staff and coordinating unit and hospital-wide education in partnership with management. FLSA STATUS Non-exempt QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure – Must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association and, • ACLS - Advanced Cardiac Life Support or Instructor (AHA) - American Heart Association and, • NIHSTROKE - National Institute of Health Stroke Scale Certification (AHA) - American Heart Association within 4 months Preferred • Magnet - ANCC Recognized Certification, • NVCRISIS - Nonviolent Crisis Intervention or Instructor (CPI) KNOWLEDGE AND ABILITIES • Demonstrates the skills and competencies necessary to safely perform the assigned job, determined through ongoing skills, competency assessments, and performance evaluations, • Sufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or security, • Ability to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principles, • Strong assessment, organizational and problem solving skills as evidenced by capacity to prioritize multiple tasks and role components, • Ability to function independently and exercise judgment in interactions with physicians, interprofessional healthcare team and patients and their families, • Uses critical thinking skills and clinical judgment to work autonomously as defined by the Nurse Practice Act, • Demonstrates proficient time management skills, • Demonstrates highly developed assessment skills; contributes to policies, procedure and protocols, • Has knowledge of Nursing Unit’s Dashboard and Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS) scores, • Demonstrates expertise in operating the electronic medical record, • Maintains level of professional contributions as defined in Clinical Career Path program guide ESSENTIAL FUNCTIONS PEOPLE ESSENTIAL FUNCTIONS • Fosters staff engagement by demonstrating active listening, requesting and acknowledging feedback, making equitable decisions, providing rationale when appropriate, and supporting organizational goals. Anticipates the needs of the staff members and proactively offers assistance. Role models inter-professional communication, which includes active listening and teaching, and assists with staff stress management as needed. Improves departmental scores for turnover/retention on unit-based scorecard., • Role models fair and consistent leadership skills for effective team dynamics and team building strategies through problem solving, coaching, and developing staff. Coaches staff to use efficient and effective communication to establish and maintain a team environment, and to include the patient and family as a part of the team regarding their plan of care. Provides input into staff performance reviews, as appropriate., • Functions as a mentor and resource to unit staff, provides oversight for students/new employee/preceptorships. Identifies levels of organizational conflict and applies tools to effectively resolve concerns, complaints or conflict with patients, families, physicians and other inter-professional healthcare team members. SERVICE ESSENTIAL FUNCTIONS • Leads the patient and family-centered care standards, as outlined in the Houston Methodist Professional Nursing Practice document. Mentors others regarding specialty populations; audits plan of care. Practices in a manner that is congruent with cultural diversity and inclusion principles., • Maintains ongoing interactions with patients, families, and staff on the improvement of patient care through leader rounding. Ensures effective collaboration with other departments regarding patient process issues., • Drives department service standards and activities to improve department score for patient satisfaction on unit-based scorecard, through role modeling and fostering accountability. QUALITY/SAFETY ESSENTIAL FUNCTIONS • Models the standards of care related to the nursing process, as outlined in the Houston Methodist Professional Nursing Practice document, by actively participating in meeting and improving nurse sensitive quality indicators and patient safety goals. Participates in the creation of a continuous improvement environment by promoting situational awareness, assisting with audits as needed, and using teachable moments., • Coordinates nursing care throughout the shift considering patient acuity, staff skill level and safety to ensure that our duty to our patients can be met. Models the standards related to regulatory requirements and professional practice as outlined in the Houston Methodist Professional Nursing Practice document., • Facilitates seamless patient flow to/from/through the department, leading the delivery of quality family-centered care throughout the continuum of care. Ensures the patient plan of care is accurate and timely, coaching staff if documentation deficiencies are identified. Works closely with the OAs and bed management regarding timely patient placement. Proactively recognizes, determines a plan of action, and responds to situations, such as Rapid Response/CERTs, and emergency codes., • Participates in initiatives to improve quality and safety scores on the unit and hospital scorecards, through peer-to-peer accountability, reporting near misses and identifying solutions by collaborating with the interprofessional team. Role models situational awareness, using teachable moments to improve safety. Assists with audits as needed. FINANCE ESSENTIAL FUNCTIONS • Implements department strategies to achieve financial target on unit-based scorecard and mentors others to do the same through timely documentation of care, decreasing length of stay, optimizing efficiency, minimizing incidental overtime, and other areas according to departmental specifications., • Attends daily care coordination rounds to facilitate patient progression. Ensures that follow-up has been implemented on any concerns or issues identified by the team. Manages productivity in accordance with staffing grid., • Provides input into unit resource utilization including unit capital and operational budget needs. Oversees shift by shift resource utilization through the allocation of staff, supplies and contributions to the patient throughput. GROWTH/INNOVATION ESSENTIAL FUNCTIONS • Fosters identification and implementation of innovative solutions for practice changes to improve patient care or unit operations such as reduction of hospital readmissions or other department-specific measures by leading and/or participating in unit projects and shared governance activities. Investigates and incorporates evidence-based practices which are presented to shared governance and leadership. Supports change initiatives and adapts to unexpected changes., • Expands individual nursing knowledge and coaches staff to grow in knowledge, abilities, skills, and attitudes. Serves as clinical resource. Develops and disseminates, as appropriate, informational/educational resources and programs designed to improve quality and professional practice. SUPPLEMENTAL REQUIREMENTS • WORK ATTIRE, • Uniform: Yes, • Scrubs: Yes, • Business professional: No, • Other (department approved): No ON-CALL* *Note that employees may be required to be on-call during emergencies (ie. Disaster, Severe Weather Events, etc) regardless of selection below. • On Call* Yes TRAVEL** Travel specifications may vary by department • May require travel within the Houston Metropolitan area Yes, • May require travel outside Houston Metropolitan area No QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure – Must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association and, • ACLS - Advanced Cardiac Life Support or Instructor (AHA) - American Heart Association and, • NIHSTROKE - National Institute of Health Stroke Scale Certification (AHA) - American Heart Association within 4 months Preferred • Magnet - ANCC Recognized Certification, • NVCRISIS - Nonviolent Crisis Intervention or Instructor (CPI) Company Profile: Houston Methodist Willowbrook Hospital is a Magnet-recognized, not-for-profit, faith-based hospital that serves the growing Northwest Houston community. We are committed to providing quality, cost-effective health care in a compassionate environment for a full range of services, including emergency care, cardiology, orthopedics and sports medicine, comprehensive women’s services, neurology and neurosurgery, oncology, and primary and general medicine. Houston Methodist is an Equal Opportunity Employer.

At Houston Methodist, the Charge Nurse position is a licensed professional Registered Nurse (RN), who, as an experienced clinician, functions at the Competent to Proficient stage of Benner's model of clinical practice. This position creates an environment for the management and delivery of safe patient care. In addition to fulfilling the duties and responsibilities of a clinical nurse, the Charge Nurse position is a role model and coach to department personnel and assists in developing their skills and knowledge. This position provides nursing care to a diverse patient population. Besides conducting nursing assessments, assisting with exams and treatment and maintenance of medical records, this position assists in coaching and mentoring department staff in areas of clinical and professional practice. Role modeling compassionate communication with physicians and the interprofessional health care team, the Charge Nurse assumes leadership responsibilities with high level contributions at the bedside, unit, service line, and across the institution. Responsibilities for this position may include but are not limited to leading unit and shared governance activities, assessing unit needs related to practice and improvement opportunities, serving as a clinical resource for both unit and hospital staff and coordinating unit and hospital-wide education in partnership with management. FLSA STATUS Non-exempt QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure – Must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association and, • ACLS - Advanced Cardiac Life Support or Instructor (AHA) - American Heart Association and, • PALS - Pediatric Advanced Life Support or Instructor (AHA) - American Heart Association and, • NIHSTROKE - National Institute of Health Stroke Scale Certification (AHA) - American Heart Association and, • NVCRISIS - Nonviolent Crisis Intervention or Instructor (CPI) - Crisis Prevention Institute within 4 months Preferred, • Magnet - ANCC Recognized Certification or, • ENPC - Emergency Nursing Pediatric Certification (ENA) or, • TNCC - Trauma Nursing Core Course or Instructor (ENA) KNOWLEDGE AND ABILITIES • Demonstrates the skills and competencies necessary to safely perform the assigned job, determined through ongoing skills, competency assessments, and performance evaluations., • Sufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or security., • Ability to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principles., • Strong assessment, organizational and problem solving skills as evidenced by capacity to prioritize multiple tasks and role components, • Ability to function independently and exercise judgment in interactions with physicians, interprofessional healthcare team and patients and their families., • Uses critical thinking skills and clinical judgment to work autonomously as defined by the Nurse Practice Act., • Demonstrates proficient time management skills., • Demonstrates highly developed assessment skills; contributes to policies, procedure and protocols., • Has knowledge of Nursing Unit’s Dashboard and Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS) scores., • Demonstrates expertise in operating the electronic medical record, • Maintains level of professional contributions as defined in Clinical Career Path program guide ESSENTIAL FUNCTIONS PEOPLE ESSENTIAL FUNCTIONS • Fosters staff engagement by demonstrating active listening, requesting and acknowledging feedback, making equitable decisions, providing rationale when appropriate, and supporting organizational goals. Anticipates the needs of the staff members and proactively offers assistance. Role models inter-professional communication, which includes active listening and teaching, and assists with staff stress management as needed. Improves departmental scores for turnover/retention on unit-based scorecard., • Role models fair and consistent leadership skills for effective team dynamics and team building strategies through problem solving, coaching, and developing staff. Coaches staff to use efficient and effective communication to establish and maintain a team environment, and to include the patient and family as a part of the team regarding their plan of care. Provides input into staff performance reviews, as appropriate., • Functions as a mentor and resource to unit staff, provides oversight for students/new employee/preceptor ships. Identifies levels of organizational conflict and applies tools to effectively resolve concerns, complaints or conflict with patients, families, physicians and other inter-professional healthcare team members. SERVICE ESSENTIAL FUNCTIONS • Leads the patient and family-centered care standards, as outlined in the Houston Methodist Professional Nursing Practice document. Mentors others regarding specialty populations; audits plan of care. Practices in a manner that is congruent with cultural diversity and inclusion principles., • Maintains ongoing interactions with patients, families, and staff on the improvement of patient care through leader rounding. Ensures effective collaboration with other departments regarding patient process issues., • Drives department service standards and activities to improve department score for patient satisfaction on unit-based scorecard, through role modeling and fostering accountability. QUALITY/SAFETY ESSENTIAL FUNCTIONS • Models the standards of care related to the nursing process, as outlined in the Houston Methodist Professional Nursing Practice document, by actively participating in meeting and improving nurse sensitive quality indicators and patient safety goals. Participates in the creation of a continuous improvement environment by promoting situational awareness, assisting with audits as needed, and using teachable moments., • Coordinates nursing care throughout the shift considering patient acuity, staff skill level and safety to ensure that our duty to our patients can be met. Models the standards related to regulatory requirements and professional practice as outlined in the Houston Methodist Professional Nursing Practice document., • Facilitates seamless patient flow to/from/through the department, leading the delivery of quality family-centered care throughout the continuum of care. Ensures the patient plan of care is accurate and timely, coaching staff if documentation deficiencies are identified. Works closely with the OAs and bed management regarding timely patient placement. Proactively recognizes, determines a plan of action, and responds to situations, such as Rapid Response/CERTs, and emergency codes., • Participates in initiatives to improve quality and safety scores on the unit and hospital scorecards, through peer-to-peer accountability, reporting near misses and identifying solutions by collaborating with the interprofessional team. Role models situational awareness, using teachable moments to improve safety. Assists with audits as needed. FINANCE ESSENTIAL FUNCTIONS • Implements department strategies to achieve financial target on unit-based scorecard and mentors others to do the same through timely documentation of care, decreasing length of stay, optimizing efficiency, minimizing incidental overtime, and other areas according to departmental specifications., • Attends daily care coordination rounds to facilitate patient progression. Ensures that follow-up has been implemented on any concerns or issues identified by the team. Manages productivity in accordance with staffing grid., • Provides input into unit resource utilization including unit capital and operational budget needs. Oversees shift by shift resource utilization through the allocation of staff, supplies and contributions to the patient throughput. GROWTH/INNOVATION ESSENTIAL FUNCTIONS • Fosters identification and implementation of innovative solutions for practice changes to improve patient care or unit operations such as reduction of hospital readmissions or other department-specific measures by leading and/or participating in unit projects and shared governance activities. Investigates and incorporates evidence-based practices which are presented to shared governance and leadership. Supports change initiatives and adapts to unexpected changes., • Expands individual nursing knowledge and coaches staff to grow in knowledge, abilities, skills, and attitudes. Serves as clinical resource. Develops and disseminates, as appropriate, informational/educational resources and programs designed to improve quality and professional practice. SUPPLEMENTAL REQUIREMENTS WORK ATTIRE • Uniform: Yes, • Scrubs: Yes, • Business professional: No, • Other (department approved): No ON-CALL* *Note that employees may be required to be on-call during emergencies (ie. Disaster, Severe Weather Events, etc) regardless of selection below. • On Call* Yes TRAVEL** Travel specifications may vary by department • May require travel within the Houston Metropolitan area Yes, • May require travel outside Houston Metropolitan area No QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure – Must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association and, • ACLS - Advanced Cardiac Life Support or Instructor (AHA) - American Heart Association and, • PALS - Pediatric Advanced Life Support or Instructor (AHA) - American Heart Association and, • NIHSTROKE - National Institute of Health Stroke Scale Certification (AHA) - American Heart Association and, • NVCRISIS - Nonviolent Crisis Intervention or Instructor (CPI) - Crisis Prevention Institute within 4 months Preferred, • Magnet - ANCC Recognized Certification or, • ENPC - Emergency Nursing Pediatric Certification (ENA) or, • TNCC - Trauma Nursing Core Course or Instructor (ENA) Company Profile: Houston Methodist Willowbrook Hospital is a Magnet-recognized, not-for-profit, faith-based hospital that serves the growing Northwest Houston community. We are committed to providing quality, cost-effective health care in a compassionate environment for a full range of services, including emergency care, cardiology, orthopedics and sports medicine, comprehensive women’s services, neurology and neurosurgery, oncology, and primary and general medicine. Houston Methodist is an Equal Opportunity Employer.

At Houston Methodist, the Charge Nurse position is a licensed professional Registered Nurse (RN) who, as an experienced clinician, functions at the Competent to Proficient stage of Benner's model of clinical practice. This position creates an environment for the management and delivery of safe patient care. In addition to fulfilling the duties and responsibilities of a clinical nurse, the Charge Nurse position is a role model and coach to department personnel and assists in developing their skills and knowledge. This position provides nursing care to a diverse patient population. Besides conducting nursing assessments, assisting with exams and treatment and maintenance of medical records, this position assists in coaching and mentoring department staff in areas of clinical and professional practice. Role modeling compassionate communication with physicians and the interprofessional health care team, the Charge Nurse assumes leadership responsibilities with high-level contributions at the bedside, unit, service line, and across the institution. Responsibilities for this position may include but are not limited to leading unit and shared governance activities, assessing unit needs related to practice and improvement opportunities, serving as a clinical resource for both unit and hospital staff and coordinating unit and hospital-wide education in partnership with management. FLSA STATUS Non-exempt QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure – Must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association and, • NIHSTROKE - National Institute of Health Stroke Scale Certification (AHA) - American Heart Association within 4 months Preferred, • Magnet - ANCC Recognized Certification KNOWLEDGE AND ABILITIES • Demonstrates the skills and competencies necessary to safely perform the assigned job, determined through ongoing skills, competency assessments, and performance evaluations, • Sufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or security, • Ability to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principles, • Strong assessment, organizational and problem solving skills as evidenced by capacity to prioritize multiple tasks and role components, • Ability to function independently and exercise judgment in interactions with physicians, interprofessional healthcare team and patients and their families, • Uses critical thinking skills and clinical judgment to work autonomously as defined by the Nurse Practice Act, • Demonstrates proficient time management skills, • Demonstrates highly developed assessment skills; contributes to policies, procedure and protocols, • Has knowledge of Nursing Unit’s Dashboard and Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS) scores, • Demonstrates expertise in operating the electronic medical record, • Maintains level of professional contributions as defined in Clinical Career Path program guide ESSENTIAL FUNCTIONS PEOPLE ESSENTIAL FUNCTIONS • Fosters staff engagement by demonstrating active listening, requesting and acknowledging feedback, making equitable decisions, providing rationale when appropriate, and supporting organizational goals. Anticipates the needs of the staff members and proactively offers assistance. Role models inter-professional communication, which includes active listening and teaching, and assists with staff stress management as needed. Improves departmental scores for turnover/retention on unit-based scorecard., • Role models fair and consistent leadership skills for effective team dynamics and team building strategies through problem solving, coaching, and developing staff. Coaches staff to use efficient and effective communication to establish and maintain a team environment, and to include the patient and family as a part of the team regarding their plan of care. Provides input into staff performance reviews, as appropriate., • Functions as a mentor and resource to unit staff, provides oversight for students/new employee/preceptorships. Identifies levels of organizational conflict and applies tools to effectively resolve concerns, complaints or conflict with patients, families, physicians and other inter-professional healthcare team members. SERVICE ESSENTIAL FUNCTIONS • Leads the patient and family-centered care standards, as outlined in the Houston Methodist Professional Nursing Practice document. Mentors others regarding specialty populations; audits plan of care. Practices in a manner that is congruent with cultural diversity and inclusion principles., • Maintains ongoing interactions with patients, families, and staff on the improvement of patient care through leader rounding. Ensures effective collaboration with other departments regarding patient process issues., • Drives department service standards and activities to improve department score for patient satisfaction on unit-based scorecard, through role modeling and fostering accountability. QUALITY/SAFETY ESSENTIAL FUNCTIONS • Models the standards of care related to the nursing process, as outlined in the Houston Methodist Professional Nursing Practice document, by actively participating in meeting and improving nurse sensitive quality indicators and patient safety goals. Participates in the creation of a continuous improvement environment by promoting situational awareness, assisting with audits as needed, and using teachable moments., • Coordinates nursing care throughout the shift considering patient acuity, staff skill level and safety to ensure that our duty to our patients can be met. Models the standards related to regulatory requirements and professional practice as outlined in the Houston Methodist Professional Nursing Practice document., • Facilitates seamless patient flow to/from/through the department, leading the delivery of quality family-centered care throughout the continuum of care. Ensures the patient plan of care is accurate and timely, coaching staff if documentation deficiencies are identified. Works closely with the OAs and bed management regarding timely patient placement. Proactively recognizes, determines a plan of action, and responds to situations, such as Rapid Response/CERTs, and emergency codes., • Participates in initiatives to improve quality and safety scores on the unit and hospital scorecards, through peer-to-peer accountability, reporting near misses and identifying solutions by collaborating with the interprofessional team. Role models situational awareness, using teachable moments to improve safety. Assists with audits as needed. FINANCE ESSENTIAL FUNCTIONS • Implements department strategies to achieve financial target on unit-based scorecard and mentors others to do the same through timely documentation of care, decreasing length of stay, optimizing efficiency, minimizing incidental overtime, and other areas according to departmental specifications., • Attends daily care coordination rounds to facilitate patient progression. Ensures that follow-up has been implemented on any concerns or issues identified by the team. Manages productivity in accordance with staffing grid., • Provides input into unit resource utilization including unit capital and operational budget needs. Oversees shift by shift resource utilization through the allocation of staff, supplies and contributions to the patient throughput. GROWTH/INNOVATION ESSENTIAL FUNCTIONS • Fosters identification and implementation of innovative solutions for practice changes to improve patient care or unit operations such as reduction of hospital readmissions or other department-specific measures by leading and/or participating in unit projects and shared governance activities. Investigates and incorporates evidence-based practices which are presented to shared governance and leadership. Supports change initiatives and adapts to unexpected changes., • Expands individual nursing knowledge and coaches staff to grow in knowledge, abilities, skills, and attitudes. Serves as clinical resource. Develops and disseminates, as appropriate, informational/educational resources and programs designed to improve quality and professional practice. SUPPLEMENTAL REQUIREMENTS WORK ATTIRE • Uniform: Yes, • Scrubs: Yes, • Business professional: No, • Other (department approved): No ON-CALL* *Note that employees may be required to be on-call during emergencies (ie. Disaster, Severe Weather Events, etc) regardless of selection below. • On Call* Yes TRAVEL** Travel specifications may vary by department • May require travel within the Houston Metropolitan area Yes, • May require travel outside Houston Metropolitan area No QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure – Must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association and, • NIHSTROKE - National Institute of Health Stroke Scale Certification (AHA) - American Heart Association within 4 months Preferred, • Magnet - ANCC Recognized Certification Company Profile: Houston Methodist Willowbrook Hospital is a Magnet-recognized, not-for-profit, faith-based hospital that serves the growing Northwest Houston community. We are committed to providing quality, cost-effective health care in a compassionate environment for a full range of services, including emergency care, cardiology, orthopedics and sports medicine, comprehensive women’s services, neurology and neurosurgery, oncology, and primary and general medicine. Houston Methodist is an Equal Opportunity Employer.

At Houston Methodist, the Charge Nurse position is a licensed professional Registered Nurse (RN) who, as an experienced clinician, functions at the Competent to Proficient stage of Benner's model of clinical practice. This position creates an environment for the management and delivery of safe patient care. In addition to fulfilling the duties and responsibilities of a clinical nurse, the Charge Nurse position is a role model and coach to department personnel and assists in developing their skills and knowledge. This position provides nursing care to a diverse patient population. Besides conducting nursing assessments, assisting with exams and treatment and maintenance of medical records, this position assists in coaching and mentoring department staff in areas of clinical and professional practice. Role modeling compassionate communication with physicians and the interprofessional health care team, the Charge Nurse assumes leadership responsibilities with high-level contributions at the bedside, unit, service line, and across the institution. Responsibilities for this position may include but are not limited to leading unit and shared governance activities, assessing unit needs related to practice and improvement opportunities, serving as a clinical resource for both unit and hospital staff and coordinating unit and hospital-wide education in partnership with management. FLSA STATUS Non-exempt QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure – Must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association and, • NIHSTROKE - National Institute of Health Stroke Scale Certification (AHA) - American Heart Association within 4 months Preferred, • Magnet - ANCC Recognized Certification KNOWLEDGE AND ABILITIES • Demonstrates the skills and competencies necessary to safely perform the assigned job, determined through ongoing skills, competency assessments, and performance evaluations, • Sufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or security, • Ability to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principles, • Strong assessment, organizational and problem solving skills as evidenced by capacity to prioritize multiple tasks and role components, • Ability to function independently and exercise judgment in interactions with physicians, interprofessional healthcare team and patients and their families, • Uses critical thinking skills and clinical judgment to work autonomously as defined by the Nurse Practice Act, • Demonstrates proficient time management skills, • Demonstrates highly developed assessment skills; contributes to policies, procedure and protocols, • Has knowledge of Nursing Unit’s Dashboard and Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS) scores, • Demonstrates expertise in operating the electronic medical record, • Maintains level of professional contributions as defined in Clinical Career Path program guide ESSENTIAL FUNCTIONS PEOPLE ESSENTIAL FUNCTIONS • Fosters staff engagement by demonstrating active listening, requesting and acknowledging feedback, making equitable decisions, providing rationale when appropriate, and supporting organizational goals. Anticipates the needs of the staff members and proactively offers assistance. Role models inter-professional communication, which includes active listening and teaching, and assists with staff stress management as needed. Improves departmental scores for turnover/retention on unit-based scorecard., • Role models fair and consistent leadership skills for effective team dynamics and team building strategies through problem solving, coaching, and developing staff. Coaches staff to use efficient and effective communication to establish and maintain a team environment, and to include the patient and family as a part of the team regarding their plan of care. Provides input into staff performance reviews, as appropriate., • Functions as a mentor and resource to unit staff, provides oversight for students/new employee/preceptorships. Identifies levels of organizational conflict and applies tools to effectively resolve concerns, complaints or conflict with patients, families, physicians and other inter-professional healthcare team members. SERVICE ESSENTIAL FUNCTIONS • Leads the patient and family-centered care standards, as outlined in the Houston Methodist Professional Nursing Practice document. Mentors others regarding specialty populations; audits plan of care. Practices in a manner that is congruent with cultural diversity and inclusion principles., • Maintains ongoing interactions with patients, families, and staff on the improvement of patient care through leader rounding. Ensures effective collaboration with other departments regarding patient process issues., • Drives department service standards and activities to improve department score for patient satisfaction on unit-based scorecard, through role modeling and fostering accountability. QUALITY/SAFETY ESSENTIAL FUNCTIONS • Models the standards of care related to the nursing process, as outlined in the Houston Methodist Professional Nursing Practice document, by actively participating in meeting and improving nurse sensitive quality indicators and patient safety goals. Participates in the creation of a continuous improvement environment by promoting situational awareness, assisting with audits as needed, and using teachable moments., • Coordinates nursing care throughout the shift considering patient acuity, staff skill level and safety to ensure that our duty to our patients can be met. Models the standards related to regulatory requirements and professional practice as outlined in the Houston Methodist Professional Nursing Practice document., • Facilitates seamless patient flow to/from/through the department, leading the delivery of quality family-centered care throughout the continuum of care. Ensures the patient plan of care is accurate and timely, coaching staff if documentation deficiencies are identified. Works closely with the OAs and bed management regarding timely patient placement. Proactively recognizes, determines a plan of action, and responds to situations, such as Rapid Response/CERTs, and emergency codes., • Participates in initiatives to improve quality and safety scores on the unit and hospital scorecards, through peer-to-peer accountability, reporting near misses and identifying solutions by collaborating with the interprofessional team. Role models situational awareness, using teachable moments to improve safety. Assists with audits as needed. FINANCE ESSENTIAL FUNCTIONS • Implements department strategies to achieve financial target on unit-based scorecard and mentors others to do the same through timely documentation of care, decreasing length of stay, optimizing efficiency, minimizing incidental overtime, and other areas according to departmental specifications., • Attends daily care coordination rounds to facilitate patient progression. Ensures that follow-up has been implemented on any concerns or issues identified by the team. Manages productivity in accordance with staffing grid., • Provides input into unit resource utilization including unit capital and operational budget needs. Oversees shift by shift resource utilization through the allocation of staff, supplies and contributions to the patient throughput. GROWTH/INNOVATION ESSENTIAL FUNCTIONS • Fosters identification and implementation of innovative solutions for practice changes to improve patient care or unit operations such as reduction of hospital readmissions or other department-specific measures by leading and/or participating in unit projects and shared governance activities. Investigates and incorporates evidence-based practices which are presented to shared governance and leadership. Supports change initiatives and adapts to unexpected changes., • Expands individual nursing knowledge and coaches staff to grow in knowledge, abilities, skills, and attitudes. Serves as clinical resource. Develops and disseminates, as appropriate, informational/educational resources and programs designed to improve quality and professional practice. SUPPLEMENTAL REQUIREMENTS WORK ATTIRE • Uniform: Yes, • Scrubs: Yes, • Business professional: No, • Other (department approved): No ON-CALL* *Note that employees may be required to be on-call during emergencies (ie. Disaster, Severe Weather Events, etc) regardless of selection below. • On Call* Yes TRAVEL** Travel specifications may vary by department • May require travel within the Houston Metropolitan area Yes, • May require travel outside Houston Metropolitan area No QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure – Must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association and, • NIHSTROKE - National Institute of Health Stroke Scale Certification (AHA) - American Heart Association within 4 months Preferred, • Magnet - ANCC Recognized Certification Company Profile: Houston Methodist Willowbrook Hospital is a Magnet-recognized, not-for-profit, faith-based hospital that serves the growing Northwest Houston community. We are committed to providing quality, cost-effective health care in a compassionate environment for a full range of services, including emergency care, cardiology, orthopedics and sports medicine, comprehensive women’s services, neurology and neurosurgery, oncology, and primary and general medicine. Houston Methodist is an Equal Opportunity Employer.

At Houston Methodist, the Charge Nurse position is a licensed professional Registered Nurse (RN) who, as an experienced clinician, functions at the Competent to Proficient stage of Benner's model of clinical practice. This position creates an environment for the management and delivery of safe patient care. In addition to fulfilling the duties and responsibilities of a clinical nurse, the Charge Nurse position is a role model and coach to department personnel and assists in developing their skills and knowledge. This position provides nursing care to a diverse patient population. Besides conducting nursing assessments, assisting with exams and treatment and maintenance of medical records, this position assists in coaching and mentoring department staff in areas of clinical and professional practice. Role modeling compassionate communication with physicians and the interprofessional health care team, the Charge Nurse assumes leadership responsibilities with high-level contributions at the bedside, unit, service line, and across the institution. Responsibilities for this position may include but are not limited to leading unit and shared governance activities, assessing unit needs related to practice and improvement opportunities, serving as a clinical resource for both unit and hospital staff and coordinating unit and hospital-wide education in partnership with management. FLSA STATUS Non-exempt QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure – Must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association and, • NIHSTROKE - National Institute of Health Stroke Scale Certification (AHA) - American Heart Association within 4 months Preferred, • Magnet - ANCC Recognized Certification KNOWLEDGE AND ABILITIES • Demonstrates the skills and competencies necessary to safely perform the assigned job, determined through ongoing skills, competency assessments, and performance evaluations, • Sufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or security, • Ability to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principles, • Strong assessment, organizational and problem solving skills as evidenced by capacity to prioritize multiple tasks and role components, • Ability to function independently and exercise judgment in interactions with physicians, interprofessional healthcare team and patients and their families, • Uses critical thinking skills and clinical judgment to work autonomously as defined by the Nurse Practice Act, • Demonstrates proficient time management skills, • Demonstrates highly developed assessment skills; contributes to policies, procedure and protocols, • Has knowledge of Nursing Unit’s Dashboard and Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS) scores, • Demonstrates expertise in operating the electronic medical record, • Maintains level of professional contributions as defined in Clinical Career Path program guide ESSENTIAL FUNCTIONS PEOPLE ESSENTIAL FUNCTIONS • Fosters staff engagement by demonstrating active listening, requesting and acknowledging feedback, making equitable decisions, providing rationale when appropriate, and supporting organizational goals. Anticipates the needs of the staff members and proactively offers assistance. Role models inter-professional communication, which includes active listening and teaching, and assists with staff stress management as needed. Improves departmental scores for turnover/retention on unit-based scorecard., • Role models fair and consistent leadership skills for effective team dynamics and team building strategies through problem solving, coaching, and developing staff. Coaches staff to use efficient and effective communication to establish and maintain a team environment, and to include the patient and family as a part of the team regarding their plan of care. Provides input into staff performance reviews, as appropriate., • Functions as a mentor and resource to unit staff, provides oversight for students/new employee/preceptorships. Identifies levels of organizational conflict and applies tools to effectively resolve concerns, complaints or conflict with patients, families, physicians and other inter-professional healthcare team members. SERVICE ESSENTIAL FUNCTIONS • Leads the patient and family-centered care standards, as outlined in the Houston Methodist Professional Nursing Practice document. Mentors others regarding specialty populations; audits plan of care. Practices in a manner that is congruent with cultural diversity and inclusion principles., • Maintains ongoing interactions with patients, families, and staff on the improvement of patient care through leader rounding. Ensures effective collaboration with other departments regarding patient process issues., • Drives department service standards and activities to improve department score for patient satisfaction on unit-based scorecard, through role modeling and fostering accountability. QUALITY/SAFETY ESSENTIAL FUNCTIONS • Models the standards of care related to the nursing process, as outlined in the Houston Methodist Professional Nursing Practice document, by actively participating in meeting and improving nurse sensitive quality indicators and patient safety goals. Participates in the creation of a continuous improvement environment by promoting situational awareness, assisting with audits as needed, and using teachable moments., • Coordinates nursing care throughout the shift considering patient acuity, staff skill level and safety to ensure that our duty to our patients can be met. Models the standards related to regulatory requirements and professional practice as outlined in the Houston Methodist Professional Nursing Practice document., • Facilitates seamless patient flow to/from/through the department, leading the delivery of quality family-centered care throughout the continuum of care. Ensures the patient plan of care is accurate and timely, coaching staff if documentation deficiencies are identified. Works closely with the OAs and bed management regarding timely patient placement. Proactively recognizes, determines a plan of action, and responds to situations, such as Rapid Response/CERTs, and emergency codes., • Participates in initiatives to improve quality and safety scores on the unit and hospital scorecards, through peer-to-peer accountability, reporting near misses and identifying solutions by collaborating with the interprofessional team. Role models situational awareness, using teachable moments to improve safety. Assists with audits as needed. FINANCE ESSENTIAL FUNCTIONS • Implements department strategies to achieve financial target on unit-based scorecard and mentors others to do the same through timely documentation of care, decreasing length of stay, optimizing efficiency, minimizing incidental overtime, and other areas according to departmental specifications., • Attends daily care coordination rounds to facilitate patient progression. Ensures that follow-up has been implemented on any concerns or issues identified by the team. Manages productivity in accordance with staffing grid., • Provides input into unit resource utilization including unit capital and operational budget needs. Oversees shift by shift resource utilization through the allocation of staff, supplies and contributions to the patient throughput. GROWTH/INNOVATION ESSENTIAL FUNCTIONS • Fosters identification and implementation of innovative solutions for practice changes to improve patient care or unit operations such as reduction of hospital readmissions or other department-specific measures by leading and/or participating in unit projects and shared governance activities. Investigates and incorporates evidence-based practices which are presented to shared governance and leadership. Supports change initiatives and adapts to unexpected changes., • Expands individual nursing knowledge and coaches staff to grow in knowledge, abilities, skills, and attitudes. Serves as clinical resource. Develops and disseminates, as appropriate, informational/educational resources and programs designed to improve quality and professional practice. SUPPLEMENTAL REQUIREMENTS WORK ATTIRE • Uniform: Yes, • Scrubs: Yes, • Business professional: No, • Other (department approved): No ON-CALL* *Note that employees may be required to be on-call during emergencies (ie. Disaster, Severe Weather Events, etc) regardless of selection below. • On Call* Yes TRAVEL** Travel specifications may vary by department • May require travel within the Houston Metropolitan area Yes, • May require travel outside Houston Metropolitan area No QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure – Must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association and, • NIHSTROKE - National Institute of Health Stroke Scale Certification (AHA) - American Heart Association within 4 months Preferred, • Magnet - ANCC Recognized Certification Company Profile: Houston Methodist Willowbrook Hospital is a Magnet-recognized, not-for-profit, faith-based hospital that serves the growing Northwest Houston community. We are committed to providing quality, cost-effective health care in a compassionate environment for a full range of services, including emergency care, cardiology, orthopedics and sports medicine, comprehensive women’s services, neurology and neurosurgery, oncology, and primary and general medicine. Houston Methodist is an Equal Opportunity Employer.

Job Overview: The CEPG Controls Team Supervisor will assist the CEG Programming Manager in providing direction and delegating work to the Controls Technician(s) while continuing to execute controls work. Will lead, mentor and direct the activities and tasks of the Controls group. Be responsible for leading the team to timely and successful projects while empowering individual team members to maintain ownership of their assigned tasks. Position assists multiple facets of the Custom Equipment Group programming team by working closely with specialists involving high level supervisory control and data acquisition (SCADA), database systems and Programmable Logic Controllers (PLC) to fully integrate systems for sophisticated automated manufacturing equipment. Individual must have the ability to learn the Integrity/Infinity product offerings and legacy enterprise resource planning (ERP) system to understand the relationship between individual parts, finished products and how the systems integrate across all product lines within the organization. This job is located in Fargo, ND. If you're considering relocating to Fargo, you may be eligible for a relocation benefit package to assist with your move. Marvin offers an extensive relocation benefit package that includes the movement of your household goods, temporary housing, and much more - in addition to a relocation counselor to assist you throughout the entire journey. Highlights of your role: • SUPERVISION - Provide direction and assist in overseeing all functions of the controls group and interaction with our Automation Systems, Maintenance, IS and overall Operations while continuing to execute controls work. Participate and facilitate interviewing potential candidates, training employees, planning, leading and delegation of workload balance, evaluating work, assist in rewarding and disciplining employees, addressing complaints and resolving problems., • RESEARCH/FORWARD THINKING - Assist in the research, analysis, installation and testing of automation control systems to improve machine efficiency and advance current systems to meet project and future production demands while maintaining feedback loops and end user training. Provide input to controls components/devices, software, database, graphic display and external system interface requirements while adhering to company standards and alignment with IS strategies., • TROUBLESHOOTING/RESOLUTION/PREVENTIVE MAINTENANCE - Ability and skill set to diagnose electrical, mechanical, pneumatic and programmatic problems of equipment and facilities in order to provide solutions to ensure equipment and processes are continually operational. Provide input for preventative maintenance rule sets for common recurring issues to enhance equipment and facility effectiveness. Support the Marvin companies, as applicable, to analyze current operational procedures. Identify user problems and systems needs to make improvements or resolve issues with our internal customers, • PROJECT MANAGEMENT - Must possess project management skills while executing to a timeline for successful projects or proper resolution., • RELATIONSHIPS - Liaison and critical resource between our vendors and new or modified equipment to ensure control panels, wiring schematics, components and general controls/electrical practices align with our General Specification and procedures. Build and maintain internal relationships across all functional departments., • COMMUNICATION - Strong, proactive communication skills are an expectation along with the responsibility for creating a team environment while training and mentoring others to ensure we win as a team. You're a good fit if you have (or if you can):, • Working knowledge of manufacturing software (ICIM) and Microsoft Office Suite is required, as is experience with PLC and Operator Interface programming languages, • Familiarity with standard networking technologies and hardware, • Knowledge of SCADA and control systems and components used for automation equipment, • Knowledge of data communication protocols, industrial protocols, and computer operating systems such as Microsoft Windows and Unix/Linux, • Four year degree is preferred, or one to two years of related experience/training or an equivalent combination of education and experience, • Experience in a manufacturing environment is preferred We invite you to See Yourself at Marvin: From people to products, Marvin is committed to creating better ways of living. When you join this family-owned and -led window and door company, you belong to a community full of opportunities. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities, • Brighter Days Fund – financial support from your colleagues and the Marvin family during personal hardships Join the more than 8,000 Marvin team members to experience these benefits and more. Apply today! Marvin is an Equal Opportunity Employer: Marvin is committed to creating an inclusive environment for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable laws. Applicants requiring reasonable accommodation for any part of the application and hiring process may contact us at _.

Job Overview: The CEPG Controls Engineer works on the CEPG Controls Team to program, research, upgrade, purchase, install and maintain all controls for the manufacturing and facility equipment throughout the Marvin family of brands. Will work closely with manufacturing, maintenance, engineering, systems and facility personnel to design, implement and support the needs related to Programmable Logic Controllers (PLC) and controls throughout the organization. Position is responsible for researching, analyzing and testing existing and new control systems and technologies. Responsibilities also include working closely with vendors, suppliers, engineers and project teams to facilitate the transfer of new equipment, technologies and products to the production floor; as well as, improving machine efficiency and striving to enhance current systems to meet the needs of the future. Individual must have a thorough understanding of the organizations control systems, equipment schematics, electrical standards and safety programs to provide technical support and training to maintenance and operators. This job is located in Fargo, ND. If you're considering relocating to Fargo, you may be eligible for a relocation benefit package to assist with your move. Marvin offers an extensive relocation benefit package that includes the movement of your household goods, temporary housing, and much more - in addition to a relocation counselor to assist you throughout the entire journey. Highlights of your role: • RESEARCH/FORWARD THINKING - Assist in the research, analysis, installation and testing of automation control systems to improve machine efficiency and advance current systems to meet project and future production demands while maintaining feedback loops and end user training. Provide input to controls components/devices, software, database, graphic display and external system interface requirements while adhering to company standards and alignment with IS strategies., • TROUBLESHOOTING/RESOLUTION/PREVENTIVE MAINTENANCE - Ability and skill set to diagnose electrical, mechanical, pneumatic and programmatic problems of equipment and facilities in order to provide solutions to ensure equipment and processes are continually operational. Provide input for preventative maintenance rule sets for common recurring issues to enhance equipment and facility effectiveness. Support the Marvin companies, as applicable, to analyze current operational procedures. Identify user problems and systems needs to make improvements or resolve issues with our internal customers., • RELATIONSHIPS - Liaison and critical resource between our vendors and new or modified equipment to ensure control panels, wiring schematics, components and general controls/electrical practices align with our General Specification and procedures. Build and maintain internal relationships across all functional departments., • COMMUNICATION - Strong, proactive communication skills are an expectation along with the responsibility for creating a team environment while training and mentoring others to ensure we win as a team., • SAFETY - Practice safe work procedures and comply with the provisions of Marvin Electrical and Safety Policies. You're a good fit if you have (or if you can):, • Bachelor's degree in Electrical Engineering or equivalent 4-year degree in a related field preferred, • Two or more years related experience/training required, • Ability to use electrical test equipment and hand tools, • Proficient ability to read and understand prints and schematics, • Knowledge of AutoCAD Electrical and Microsoft Office Suite (i.e. Word, Excel, Outlook, Access), • Working knowledge of PLC and Operator Interface programming languages is required, • Ability to travel as required We invite you to See Yourself at Marvin: From people to products, Marvin is committed to creating better ways of living. When you join this family-owned and -led window and door company, you belong to a community full of opportunities. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities, • Brighter Days Fund – financial support from your colleagues and the Marvin family during personal hardships Join the more than 8,000 Marvin team members to experience these benefits and more. Apply today! Marvin is an Equal Opportunity Employer: Marvin is committed to creating an inclusive environment for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable laws. Applicants requiring reasonable accommodation for any part of the application and hiring process may contact us at _.

At Houston Methodist, the Charge Nurse position is a licensed professional Registered Nurse (RN) who, as an experienced clinician, functions at the Competent to Proficient stage of Benner's model of clinical practice. This position creates an environment for the management and delivery of safe patient care. In addition to fulfilling the duties and responsibilities of a clinical nurse, the Charge Nurse position is a role model and coach to department personnel and assists in developing their skills and knowledge. This position provides nursing care to a diverse patient population. Besides conducting nursing assessments, assisting with exams and treatment and maintenance of medical records, this position assists in coaching and mentoring department staff in areas of clinical and professional practice. Role modeling compassionate communication with physicians and the interprofessional health care team, the Charge Nurse assumes leadership responsibilities with high-level contributions at the bedside, unit, service line, and across the institution. Responsibilities for this position may include but are not limited to leading unit and shared governance activities, assessing unit needs related to practice and improvement opportunities, serving as a clinical resource for both unit and hospital staff and coordinating unit and hospital-wide education in partnership with management. FLSA STATUS Non-exempt QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure – Must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association and, • ACLS - Advanced Cardiac Life Support or Instructor (AHA) - American Heart Association Preferred, • Magnet - ANCC Recognized Certification SKILLS AND ABILITIES • Demonstrates the skills and competencies necessary to safely perform the assigned job, determined through ongoing skills, competency assessments, and performance evaluations, • Sufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or security, • Ability to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principles, • Strong assessment, organizational and problem solving skills as evidenced by capacity to prioritize multiple tasks and role components, • Ability to function independently and exercise judgment in interactions with physicians, interprofessional healthcare team and patients and their families, • Uses critical thinking skills and clinical judgment to work autonomously as defined by the Nurse Practice Act, • Demonstrates proficient time management skills, • Demonstrates highly developed assessment skills; contributes to policies, procedure and protocols, • Has knowledge of Nursing Unit’s Dashboard and Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS) scores, • Demonstrates expertise in operating the electronic medical record, • Maintains level of professional contributions as defined in Clinical Career Path program guide ESSENTIAL FUNCTIONS PEOPLE ESSENTIAL FUNCTIONS • Fosters staff engagement by demonstrating active listening, requesting and acknowledging feedback, making equitable decisions, providing rationale when appropriate, and supporting organizational goals. Anticipates the needs of the staff members and proactively offers assistance. Role models inter-professional communication, which includes active listening and teaching, and assists with staff stress management as needed. Improves departmental scores for turnover/retention on unit-based scorecard., • Role models fair and consistent leadership skills for effective team dynamics and team building strategies through problem solving, coaching, and developing staff. Coaches staff to use efficient and effective communication to establish and maintain a team environment, and to include the patient and family as a part of the team regarding their plan of care. Provides input into staff performance reviews, as appropriate., • Functions as a mentor and resource to unit staff, provides oversight for students/new employee/preceptorships. Identifies levels of organizational conflict and applies tools to effectively resolve concerns, complaints or conflict with patients, families, physicians and other inter-professional healthcare team members. SERVICE ESSENTIAL FUNCTIONS • Leads the patient and family-centered care standards, as outlined in the Houston Methodist Professional Nursing Practice document. Mentors others regarding specialty populations; audits plan of care. Practices in a manner that is congruent with cultural diversity and inclusion principles., • Maintains ongoing interactions with patients, families, and staff on the improvement of patient care through leader rounding. Ensures effective collaboration with other departments regarding patient process issues., • Drives department service standards and activities to improve department score for patient satisfaction on unit-based scorecard, through role modeling and fostering accountability. QUALITY/SAFETY ESSENTIAL FUNCTIONS • Models the standards of care related to the nursing process, as outlined in the Houston Methodist Professional Nursing Practice document, by actively participating in meeting and improving nurse sensitive quality indicators and patient safety goals. Participates in the creation of a continuous improvement environment by promoting situational awareness, assisting with audits as needed, and using teachable moments., • Coordinates nursing care throughout the shift considering patient acuity, staff skill level and safety to ensure that our duty to our patients can be met. Models the standards related to regulatory requirements and professional practice as outlined in the Houston Methodist Professional Nursing Practice document., • Facilitates seamless patient flow to/from/through the department, leading the delivery of quality family-centered care throughout the continuum of care. Ensures the patient plan of care is accurate and timely, coaching staff if documentation deficiencies are identified. Works closely with the OAs and bed management regarding timely patient placement. Proactively recognizes, determines a plan of action, and responds to situations, such as Rapid Response/CERTs, and emergency codes., • Participates in initiatives to improve quality and safety scores on the unit and hospital scorecards, through peer-to-peer accountability, reporting near misses and identifying solutions by collaborating with the interprofessional team. Role models situational awareness, using teachable moments to improve safety. Assists with audits as needed. FINANCE ESSENTIAL FUNCTIONS • Implements department strategies to achieve financial target on unit-based scorecard and mentors others to do the same through timely documentation of care, decreasing length of stay, optimizing efficiency, minimizing incidental overtime, and other areas according to departmental specifications., • Attends daily care coordination rounds to facilitate patient progression. Ensures that follow-up has been implemented on any concerns or issues identified by the team. Manages productivity in accordance with staffing grid., • Provides input into unit resource utilization including unit capital and operational budget needs. Oversees shift by shift resource utilization through the allocation of staff, supplies and contributions to the patient throughput. GROWTH/INNOVATION ESSENTIAL FUNCTIONS • Fosters identification and implementation of innovative solutions for practice changes to improve patient care or unit operations such as reduction of hospital readmissions or other department-specific measures by leading and/or participating in unit projects and shared governance activities. Investigates and incorporates evidence-based practices which are presented to shared governance and leadership. Supports change initiatives and adapts to unexpected changes., • Expands individual nursing knowledge and coaches staff to grow in knowledge, abilities, skills, and attitudes. Serves as clinical resource. Develops and disseminates, as appropriate, informational/educational resources and programs designed to improve quality and professional practice. SUPPLEMENTAL REQUIREMENTS WORK ATTIRE • Uniform: Yes, • Scrubs: Yes, • Business professional: No, • Other (department approved): No ON-CALL* *Note that employees may be required to be on-call during emergencies (ie. Disaster, Severe Weather Events, etc) regardless of selection below. • On Call* Yes TRAVEL** Travel specifications may vary by department • May require travel within the Houston Metropolitan area Yes, • May require travel outside Houston Metropolitan area No QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below in the Certifications, Licenses and Registrations section EXPERIENCE • Twenty four months of clinical nursing experience with demonstration of progressive leadership skills LICENSES AND CERTIFICATIONS Required • RN - Registered Nurse - Texas State Licensure - Texas Board of Nursing_PSV Compact Licensure – Must obtain permanent Texas license within 60 days (if establishing Texas residency) and, • BLS - Basic Life Support or Instructor (AHA) - American Heart Association and, • ACLS - Advanced Cardiac Life Support or Instructor (AHA) - American Heart Association Preferred, • Magnet - ANCC Recognized Certification Company Profile: Houston Methodist Hospital is recognized by U.S. News & World Report as the No. 1 hospital in Texas and one of America’s “Best Hospitals.” As a full-service, acute-care hospital located in the Texas Medical Center and the flagship hospital of Houston Methodist, it has evolved into one of the nation’s largest nonprofit teaching hospitals and a leader in innovative medical research with a comprehensive residency program. Two of Houston Methodist’s primary academic affiliates are among the nation’s leading health care organizations: Weill Cornell Medicine and New York-Presbyterian Hospital. Houston Methodist also has affiliations with Texas A&M University and the University of Houston. Houston Methodist Hospital offers unparalleled care for thousands of patients from around the world. Houston Methodist is an Equal Opportunity Employer.

Job Description Overview Group 1 Automotive, Inc. is seeking to hire an HRIS Analyst. This position plays a key role in supporting the day-to-day health, testing, and configuration of the Company’s Workday HCM, Payroll and Time Tracking modules. The HRIS Analyst is a member of the Workday support team, responsible for monitoring system alerts, executing test scenarios, loading data via EIBs, and performing configuration updates within Workday. The ideal candidate has 2–5 years of hands-on Workday experience and is eager to grow their technical skill set while ensuring the accuracy, stability, and reliability of the Workday environment on a daily basis. Responsibilities System Monitoring & Support • Monitor daily Workday system alerts, integration errors, and business process exceptions, • Triage issues and escalate as needed to appropriate teams or Workday support, • Track recurring issues and flag trends for process or configuration improvement, • Respond to end-user questions related to Workday functionality Testing • Conduct functional and regression testing for Workday releases, patches, and updates, • Develop and execute test scripts for HCM, Payroll and Time Tracking configuration changes, • Document test results and defects, and coordinate retesting with stakeholders, • Support user acceptance testing (UAT) for new features and enhancements EIBs & Data Management • Build, load, and validate Enterprise Interface Builder (EIB) files for mass data changes, • Ensure data integrity before and after EIB loads, • Troubleshoot EIB errors and coordinate corrections with HR and Payroll partners, • Maintain documentation of EIB templates and load processes Configuration • Perform configuration updates within Workday modules, • Support business process configuration, including condition rules and notifications, • Assist with configuration changes tied to organizational changes, such as:, • Supervisory organizations, • Job profiles and compensation elements, • Time off and absence plans, • Document configuration changes in accordance with change management standards, • Support tenant maintenance activities during Workday's bi-annual release cycles Qualifications Required • Bachelor's degree in Information Systems, Human Resources, Business Administration, or a related field, or equivalent work experience, • 2–5 years of hands-on Workday experience, • Working knowledge of Workday HCM, Payroll, Time Tracking modules, • Experience building and loading EIBs, • Experience with test planning and execution, • Strong attention to detail and data accuracy, • Excellent analytical, problem-solving, and communication skills, • Ability to manage multiple priorities in a fast-paced environment Preferred • Workday Pro Certification(s) in any HCM or Payroll modules, • Experience with Workday report writing (Advanced/Matrix reports), • Experience in a large, multi-location organization

Job DescriptionDescription:YOUR NEXT SHOP SHOULD BE THE LAST SHOP YOU EVER WANT TO LEAVE. Immediate Openings | Shop & Mobile Positions | Experienced Technicians WantedTop Pay for Top Technicians — Earn $70,000–$150,000+ Per Year | Outstanding Benefits: Health + Company Contribution | Dental | Vision | 401(k) | Paid Vacation & Holidays |LEGIT Snack Bar | & More! Career Growth | People First | Family Owned | Team That Has Your Back Why Technicians Choose Integrity Fleet Services Great technicians deserve great pay, real respect, opportunities to grow, and a team that always has their back. Our people fuel the engine behind everything we do. We're relentlessly passionate about helping our team grow while building a company you'll be proud to call home. Family-Owned. Built on Integrity. Trusted by fleets across Texas, Louisiana, and beyond. Our mission is simple: Keep trucks, trailers, and equipment safe, compliant, and operational—every asset, every mile, every time. Around here, you'll never be just another employee. You'll be part of a team that knows your name, values your ideas, and celebrates your success. YOU'LL BE A GREAT FIT IF YOU... • Have 2+ years of diesel truck or trailer repair experience, • Can diagnose and repair brakes, suspension, ABS, electrical, air, hydraulic, and mechanical systems, • Know how to use diagnostic software and scan tools, • Own your basic tools and have a clean driving record, • Take pride in quality work and solving problems—not just replacing parts, • Communicate professionally with customers and teammates, • Want a career with a growing company that values integrity, teamwork, and craftsmanship *Bonus Points: ASE Certifications • Welding Experience • Mobile Service Experience • Technical/Vocational Training WHAT YOU'LL BE DOING • Repairing & maintaining fleet trucks, trailers, forklifts, and equipment, • Diagnosing mechanical, electrical, ABS, brake, suspension, hydraulic, and air systems, • Using the latest diagnostic software and technology, • Performing both shop and mobile repairs, • Accurately documenting repairs, inspections, and completed work, • Delivering honest, quality workmanship that keeps our customers moving Full-Time | Shop & Mobile Positions Available 40–45 hours/week with limited nights, weekends, and on-call rotation. If this sounds like you, don't overthink it—apply today and let's build something great together. WE'RE NOT JERKS... WE HAVE LOTS OF PERKS! From the necessary (various health and wellness benefit options) to the nice-to-haves (we're talking EPIC snack bar friends), no matter what you are looking for, we have something just for you! We're committed to giving our technicians the tools, training, technology, and support they need to succeed. • Affordable Health Insurance with Company Contribution, • Dental Insurance, • Vision Insurance, • 401(k) / Retirement Plan, • Paid Vacation, • Paid Holidays, • Fully Stocked Snack Bar, • Real Advancement Opportunities — We promote from within whenever possible., • Modern Equipment & Diagnostic Technology, • Modern Well-Maintained Service Trucks & Shop Equipment, • Ongoing Training & Professional Development, • Family-Owned Culture, People-First Culture, • ...and much more! OUR PEOPLE We're a team of mechanics, problem-solvers, outdoor adventurers, walkers (not the zombie kind), gamers, movie buffs, parents, weekend warriors, and everything in between. Different backgrounds. Different personalities. One common goal. We work hard, laugh often, help each other out, and take pride in what we do. Around here, you'll find more than coworkers—you'll find a team. You’ll find a family. KNOW SOMEONE WHO'D BE A GREAT FIT? Share this posting! Great people know great people, and we're always looking for talented technicians to join our growing team. A FEW THINGS TO KNOW • We are a 24/7 Fleet Maintenance & Roadside Service Company, so some schedule flexibility is required., • While you'll typically work weekdays, occasional nights, weekends, or on-call shifts may be needed to support our customers., • As we continue to grow, opportunities and responsibilities may grow with you.WORK HARD.BE RESPECTED.GO HOME PROUD. If you're ready to join a team that values your skills, invests in your future, and treats you like family, we'd love to meet you. APPLY TODAY and see why so many technicians choose Integrity Fleet Services. Requirements: Qualifications • Minimum 2 years of diesel truck and/or trailer repair experience., • Experience diagnosing brakes, suspension, ABS, electrical, hydraulic, pneumatic, and mechanical systems., • Experience using diagnostic software and scan tools., • Valid driver's license with a clean driving record., • Must own basic technician tools., • Strong communication and documentation skills., • Ability to lift up to 70 pounds and perform physical work in shop and field environments., • Ability to work independently and as part of a team., • Welding experience preferred., • ASE certification preferred. Schedule, • Full-Time, • Approximately 40–45 hours per week, • Mostly weekdays, • Occasional nights, weekends, and on-call responsibilities Additional Information, • Integrity Fleet Services is a 24/7 Fleet Maintenance & Roadside Service Company., • Schedule flexibility is required., • Duties and responsibilities may change based on business needs.

Job Description Description: Key Duties / Responsibilities include, but are not limited to • Perform production duties such as manual lifting, packaging, taping, labeling operations and sorting., • Sort, weigh, and inspect products, verifying and adjusting product weight or measurement to meet specifications., • Observe machine operations to ensure quality and conformity of filled or packaged products to standards., • Monitor the production line, watching for problems and report defective materials or questionable conditions to the Management., • Stock and sort product for packaging or filling machine operation and replenish packaging supplies., • Sampling of all raw and re-packed materials, • Allocation of materials and disposal of final products for the repack department, • Move product and inventory using a forklift and bin system., • Following all HSE and Quality SOPs and or Work Instructions in accordance with any ISO 9001 and or Internal Company policies that are related requirements within the production & warehouse facility., • Observing proper utilization of equipment to ensure completion of operation and possibly perform minor maintenance procedures., • Report any issues to Management., • Document warehouse operations and their respective details such as: product tracking in each phase of the process, received, staged, shipped etc., • Housekeeping in the warehouse and around the plant, • Execute special tasks following the instructions of his or her manager. Required qualifications • Experience dealing with Chemicals, • Minimum High School degree or GED, AA Process Technology or related degree preferred, • Stable chemical or manufacturing employment history. Meet employment requirements for background checks and drug testing Must be able to work both nights and days Company DescriptionProSource Staffing is a professional staffing agency dedicated to connecting qualified candidates with companies in need of reliable talent. We specialize in providing temporary, temp-to-hire, and direct-hire staffing solutions across a variety of industries, including industrial, office, and skilled trades. Our team focuses on matching candidates’ skills and career goals with the right opportunities, while supporting both clients and employees throughout the hiring process. We pride ourselves on professionalism, personalized service, and building long-term relationships with the people and companies we serve.ProSource Staffing is a professional staffing agency dedicated to connecting qualified candidates with companies in need of reliable talent. We specialize in providing temporary, temp-to-hire, and direct-hire staffing solutions across a variety of industries, including industrial, office, and skilled trades. Our team focuses on matching candidates’ skills and career goals with the right opportunities, while supporting both clients and employees throughout the hiring process. We pride ourselves on professionalism, personalized service, and building long-term relationships with the people and companies we serve.

Job DescriptionWay Engineering is located in Houston, Austin, San Antonio, Dallas, and Nashville. We specialize in commercial air conditioning, plumbing, piping, and the ongoing maintenance of these systems. Way Engineering is at the forefront of design build/design assist, pre-construction, commissioning, building information modeling (BIM), and quality control. We are seeking a Lead Service HVAC Technician to join our team! Responsibilities: • Perform Preventive Maintenance, troubleshooting, and repairs of Commercial HVAC equipment, • Able to read and comprehend wiring diagrams, installation/operation service manuals, • Provide timely documentation using Company Service software on the Company iPad, • Provide effective communication to Customers and to the office to ensure Customer Satisfaction, • Demonstrate accountability for assigned work, including managing time and follow-ups, • Follow Safety Protocols Qualifications:, • 5 - 10 Years Commercial HVAC Experience, • Ability to follow a scope, • Must be able to pass a drug screen, • Must have a valid driver’s license and good driving record, • MUST have an EPA license, • Ability to understand the use of gauges, meters, measuring instruments, and hand/power tools, • Ability to work alone and also as part of a team, • This position requires driving on company time for company-related tasks. All candidates are subject to a driving background check before hire Perks of the Trade:, • Health Benefits, • Referral Bonuses, • Weekly Pay, • Profit Sharing Program, • 401k, • Company Vehicle, • Company Fuel card, • Company Phone, • Company iPad, • Paid Vacation, • 7 Paid Holidays, • Years of Service Appreciation Program

Job DescriptionDescription: The HVAC & General Property Maintenance Technician is a dual-skilled professional responsible for maintaining HVAC systems and performing a wide variety of general property maintenance tasks at multi-family residential properties. This role ensures tenant satisfaction by keeping properties functional, safe, and visually appealing while adhering to safety and compliance standards. Requirements: Key Responsibilities: HVAC Maintenance: • Inspect, troubleshoot, and repair HVAC systems, including furnaces, air conditioners, boilers, and heat pumps, ensuring optimal performance and energy efficiency., • Conduct preventive maintenance such as cleaning coils, replacing filters, lubricating components, and checking refrigerant levels per manufacturer specifications., • Respond promptly to HVAC-related maintenance requests, diagnose issues using diagnostic tools, and determine appropriate repair actions., • Install new HVAC systems or components, adhering to building codes and regulations., • Maintain accurate records of HVAC repairs, preventive maintenance, and inspections using maintenance management systems. General Maintenance and Repairs: • Perform plumbing, electrical, and mechanical repairs, including diagnosing and addressing system malfunctions., • Conduct carpentry tasks such as repairing or replacing doors, windows, cabinets, and flooring., • Address tenant maintenance requests promptly, prioritizing tasks based on urgency., • Perform painting and patching to maintain or enhance property aesthetics., • Ensure the proper upkeep of building systems and equipment, reporting any issues requiring specialized repairs. Groundskeeping and Landscaping: • Maintain the exterior of the property, including landscaping tasks such as mowing, trimming, and debris removal., • Handle seasonal maintenance like snow and ice removal and clearing walkways., • Safety and Compliance:, • Conduct regular inspections to identify hazards, ensure compliance with safety regulations, and mitigate risks., • Adhere to all local building codes and environmental standards., • Recordkeeping and Communication:, • Maintain detailed records of maintenance activities, materials used, and inspections performed., • Communicate effectively with property management, tenants, and team members regarding maintenance needs and project updates., • Other Responsibilities:, • Perform other duties as requested by the supervisor. Requirements: • High school diploma or equivalent; HVAC certification is required., • Proven experience in HVAC maintenance and general property maintenance., • Strong understanding of building systems, equipment, and repair techniques., • Proficiency in using diagnostic tools, hand tools, and power tools., • Ability to interpret technical manuals, schematics, and blueprints., • Strong problem-solving skills with attention to detail., • Excellent communication and interpersonal skills., • Physical ability to lift heavy objects, climb ladders, and work in varying weather conditions., • Valid driver’s license and a reliable personal vehicle for work tasks, including: Visiting tenant apartments for maintenance. Traveling between the property garage and job sites for parts and repairs. Procuring repair materials from local stores (e.g., Home Depot or Lowe’s). Mileage reimbursement provided per company policy for work-related travel. Compensation: Competitive salary with a generous benefits package. Job Type: Full-time Schedule: 8-hour shift & on-call rotation. Overtime: Responsibilities may involve Over-Time to meet the changing needs of the organization. #MT

Job Description Introduction Bigge Crane and Rigging has been elevating America since 1916. With over 1,800 cranes and a coast-to-coast presence, we buy, sell, rent, operate, and maintain one of the largest, most advanced crane fleets in the country. We’ve played a role in building some of America’s most iconic landmarks and earned a reputation for doing it right—with performance, precision, and accountability. Job Overview This position is responsible for the repair, service, and maintenance of rough terrain, crawler, and mobile cranes, as well as a variety of forklifts. The ideal candidate will bring a strong background in mechanical systems, including electrical, drivetrain, engines, hydraulics, and computer-controlled systems, and demonstrate a high level of expertise in equipment diagnostics and repairs. Responsibilities • Repairing and maintaining rough terrain, crawler, and mobile crane equipment, as well as various types of forklifts, with a primary focus on the service and repair of said equipment, • Must have a strong background in electrical, drive train, engines, hydraulics, and computer-controlled systems, • Has at least 3 - 5 years of experience in the mechanical diagnosing, repairing, and maintenance of mobile crane equipment, • Will be able to work evenings and weekends for crane repairs in the shop, • Must be capable of communicating effectively and professionally with supervisors and other personnel, • Able to read schematics (both hydraulic and electrical), • Must be able to perform competent inspections of all cranes, • Able to lift, up to 40 lbs Requirements • Minimum of 1 year of experience repairing and maintaining rough terrain, crawler, and mobile crane construction equipment; vocational training may be considered in lieu of experience, • Perform annual certifications and inspections, • Ability to perform tasks independently without direct supervision, • Computer literate with the ability to process information, • Strong work ethic with a commitment to quality, • Knowledgeable in troubleshooting various equipment lines, including Manitowoc, Grove, Terex, Tadano, Broderson, Kobelco, and Liebherr cranes, • A history of safe work habits, • Hard worker with a great attitude, • Must supply own hand tools and keep up-to-date tool inventory of service truck, • Have a current valid driver's license along with a clean driving record, • Ability to drive a company service truck. Must keep the truck clean and maintained, • A high school diploma is required, and higher education, including vocational training, is a plus Benefits • Competitive pay and a matching 401(k) plan, • Vacation, Company Holidays, and Sick Days, • Flexible spending accounts/Health savings account, • Reimbursement plan for the company Bring Your Own Device (BYOD) Policy Bigge provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, genetics, military or veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionDescription: Unify Energy Solutions is a leading provider of innovative Building Automation Solutions (BAS) that maximize energy efficiency and sustainable building operations. Our solutions control and monitor building functions such as heating, air conditioning and lighting in the education, commercial office, health care, government, and data center markets. If you're dedicated and ambitious, Unify Energy Solutions is the best place to grow your career. Apply today! Job Summary We are seeking a motivated and reliable Entry-Level HVAC Technician to join our dynamic team. This is an excellent opportunity for an individual eager to start a career in the HVAC industry. In this role, you will work directly alongside our experienced technicians in the field, gaining hands-on training, technical knowledge, and mentorship in real-world environments. You will be challenged in a fast-paced construction industry, where you will develop the foundational skills necessary to become a skilled professional while making a meaningful impact on our projects. Duties and Responsibilities As an HVAC Service Technician, you will be responsible for a wide range of tasks including, but not limited to: • Installing, maintaining, and repairing heating, ventilation, cooling, and refrigeration units for both commercial and residential customers. This includes air conditioning systems, chillers, heat pumps, and other HVAC equipment., • Diagnosing and repairing faults in HVAC systems, ensuring they operate at optimal efficiency., • Performing routine maintenance tasks such as replacing filters, lubricating parts, and inspecting electrical wiring., • Responding to emergency call-outs, quickly identifying the problem and implementing a suitable solution., • Providing technical support and advice to customers, explaining complex HVAC issues in a clear, understandable manner., • Ensuring all work is carried out in accordance with company procedures and adheres to health and safety regulations., • Keeping accurate records of work performed, materials used, and reporting any issues encountered. Benefits package available for full-time employees: • Medical, Dental, Vision, Flexible Spending Accounts, 401K, Life/AD&D/LTD, • Competitive Compensation, • Paid Vacation/Sick/Holidays, • In-Office Gym Job Type: • Full-time Job Location: • Houston, TX Unify Energy Solutions, LLC is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected veteran status. Requirements: To be considered for this role, candidates must possess the following qualifications and experiences: • Some experience as an HVAC Service Technician or recent HVAC certification graduate preferred., • Basic understanding of HVAC systems, including installation, maintenance, and repair., • Experience working with commercial HVAC systems and chillers is a plus., • A valid driver's license and the ability to travel to various job sites., • Strong customer service skills., • Excellent problem-solving skills and the ability to work under pressure., • Knowledge of current health and safety regulations.

Job DescriptionDescription: About ITEX Group: Founded in 2002, ITEX Group is a privately held real estate investment and property management firm operating apartment communities across Texas, Louisiana, Alabama, and Colorado. We are committed to building a workplace where people grow, contribute, and are recognized for their hard work. About the Role: W. Leo Daniels Towers is a 99-unit independent living community serving elderly residents and persons with disabilities. As the Service Coordinator, you are the on-site advocate who helps residents access the services and resources they need to continue living independently — healthcare, benefits, meal programs, transportation, and social connections. This position is funded through HUD’s Service Coordinators in Multifamily Housing (SCMF) program and is dedicated entirely to resident well-being. This role requires a regular on-site presence with flexibility for some administrative work to be completed offsite. What You’ll Do: • Resident engagement & assessment: Build relationships through frequent interactions. Conduct annual assessments, develop individualized service plans, and maintain a property-wide profile of resident needs., • Resource connection & referrals: Build and maintain a local provider directory. Refer residents to healthcare, food assistance, transportation, mental health, and benefits programs (Medicaid, SNAP, SSI, Medicare Part D). Follow up to ensure services are received., • Advocacy & education: Advocate for residents with service providers and government agencies. Organize on-site wellness events and educational programming. Help residents build informal support networks., • Documentation & compliance: Track all interactions, referrals, and outcomes in FamilyMetrics or AASC Online. Maintain confidential case files. Support preparation of HUD-required reports (Standards for Success, HUD-50080-SCMF). Participate in QA reviews and HUD monitoring visits., • Staff coordination: Educate property management staff on aging-in-place issues. Meet regularly with site staff to share information while maintaining role separation. This position is funded by a HUD grant and is dedicated exclusively to resident supportive services. The Service Coordinator does not perform property management functions (rent collection, lease enforcement, maintenance, or administrative tasks for the management company). This separation is required by HUD. What We’re Looking For: You care about people — particularly older adults and individuals with disabilities who need someone in their corner. You’re resourceful, organized, and comfortable working independently. You know how to listen, follow up, and get things done in a community where trust matters more than titles. What We Offer: Competitive salary based on experience Health, dental, and vision insurance; 401(k) retirement plan; paid time off Paid training and professional development, including HUD-required courses A meaningful role where your work directly impacts residents’ independence The ITEX Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Requirements: Requirements • Bachelor’s degree in social work, psychology, counseling, or related field preferred; equivalent work experience accepted, • 2–3 years providing social services, case management, or community-based support to elderly, disabled, or family populations, • Working knowledge of social services and community resources in the Houston area, • Ability to complete 36 hours of HUD-required training within 12 months of hire and 12 hours of continuing education annually, • Reliable transportation; bilingual (English/Spanish) a plus

Job DescriptionJob title: HVAC Technician.Reports to: Corporate Facilities Manager.Classification: Non-exempt.Schedule: Monday through Friday, 40 hours per week. Summary/Objective:The HVAC Technician is responsible for supporting the facilities team by performing HVAC diagnostics, preventative maintenance, and minor repairs across company properties. This role serves as a technical resource by evaluating repair recommendations, validating vendor quotes, troubleshooting equipment issues, and helping ensure cost-effective maintenance solutions. Essential Functions: • Perform minor HVAC repairs, diagnostics, and troubleshooting for commercial facilities., • Inspect and verify HVAC issues to determine appropriate repair solutions., • Review vendor recommendations and evaluate repair estimates to ensure repairs are necessary, accurate, and cost-effective., • Coordinate with contractors and vendors for major HVAC repairs and maintenance projects., • Perform preventative maintenance to improve system performance and extend equipment life., • Respond to facility maintenance requests and assist with general building maintenance tasks beyond HVAC when required., • Will assist with general maintenance requests as needed., • Any other duties assigned. Competencies:, • HVAC System Troubleshooting., • Technical Problem Solving., • Vendor & Contractor Management., • Preventive Management., • Safety & Compliance. Supervisory Responsibility:, • The HVAC Technician has no direct supervisory responsibilities. Working conditions:Work Environment: • This position requires working in commercial facilities and occasional residential properties in both indoor and outdoor environments. The role involves standing, walking, climbing ladders, lifting up to 50 pounds, and working in varying weather conditions and confined spaces. The technician must follow all safety procedures, wear appropriate PPE, and travel between company locations as needed. Physical Demands:, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel; reach with hands and arms; and able to effectively communicate within a warehouse setting. The employee frequently is required to stand; walk; and stoop, kneel, crouch or crawl. The employee is occasionally required to sit and climb or balance. The employee must regularly lift and/or move objects up to 10 pounds, frequently lift and/or move objects up to 50 pounds, and occasionally lift and/or move objects that weigh more than 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type and Expected Hours of Work:This is a full-time position. Days and hours of work are Monday through Friday, time TBD. The employee must work 40 hours each week to maintain full-time status. Qualifications:Education and Experience: • Certified License HVAC Certification., • 5 or more years of experience., • High School Diploma required.

Job Description Join Our Team at R-2 Contractors! Since 2009, R-2 Contractors has been a trusted leader in Civil & Underground construction, specializing in power infrastructure projects nationwide. From renewable energy to major utility work, we deliver expert excavation, grading, trenching, and foundation services that keep communities connected and moving forward. What truly sets us apart is our culture. At R-2, we’re a team of people who are hungry to take on challenging projects, humble enough to learn, grow, and collaborate, and smart in how we plan, build, and solve problems. We believe in showing up for each other, doing things the right way, and owning every aspect of our work. If you take pride in precision, thrive in tough conditions, and live by “Pride, Grit, & Own It!,” you’ll fit right in! We’re building more than infrastructure—we’re building a team that pushes limits and stands behind every job we do. Position: Truck Mechanic Location: Prineville, Oregon Pay Range: $33.69 – $41.54/hour Depending on union rates Position Summary We are seeking an experienced Diesel Mechanic to join our growing team in Prineville, Oregon. As a Truck/Heavy Equipment Mechanic at R-2 Contractors, you will play a crucial role in the upkeep and performance of our on-road fleet. This position involves diagnosing, maintaining, and repairing diesel trucks and DOT vehicles to ensure safe and efficient operations. Responsibilities • Diagnose, service, and repair diesel trucks and DOT vehicles, • Conduct preventative maintenance and DOT inspections, • Document all repairs and maintenance using proper work order systems, • Operate shop tools and equipment safely and efficiently, • Maintain a clean and organized workspace, • Communicate effectively with supervisors and other team members Requirements • 6+ years of diesel truck heavy equipment mechanic experience required, • Strong knowledge of DOT regulations and compliance, • Ability to lift up to 100 pounds and perform physical labor, • Must have own tools; specialty tools provided by company, • CDL Class A or B preferred, or willingness to obtain one, • Excellent diagnostic and troubleshooting skills Union Wages & Benefits: • Union Wages, • Union Retirement, • Paid Time Off (PTO) / Sick Leave, • Medical, Dental, and Vision Insurance, • 5-Year Employment Appreciation Bonus Apply today to become part of the R-2 Contractors team! *R-2 Contractors is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. R2 Contractors Terms and Conditions: By applying, candidates may receive SMS text messages regarding job opportunities, interview scheduling, application updates, and recruiting communications from R2 Contractors. You can cancel the SMS service at any time by replying STOP. After you send “STOP,” you will receive confirmation that you have been unsubscribed. After this, you will no longer receive SMS messages from us. For assistance, reply HELP or contact HR at HR@r2contractors.com. Carriers are not liable for delayed or undelivered messages. Message and data rates may apply. Message frequency varies. Privacy Policy: We collect your mobile number and related opt-in data for the delivery of SMS messages. Your mobile opt-in data and consent will not be shared with third parties or affiliates for marketing or promotional purposes. Powered by JazzHR i6ojVuETL9

Job Description Introduction Bigge Crane and Rigging has been elevating America since 1916. With over 1,800 cranes and a coast-to-coast presence, we buy, sell, rent, operate, and maintain one of the largest, most advanced crane fleets in the country. We’ve played a role in building some of America’s most iconic landmarks and earned a reputation for doing it right—with performance, precision, and accountability Summary/Objective: Bigge is always on the lookout for trained, skilled mechanics to support our ever-growing fleet. Our goal is to become the largest crane company in America, and we need talented, dedicated crane mechanics to make that happen. To show our investment in our mechanics, Bigge has obtained tool insurance to cover our shop and field mechanics. This is in addition to all of our benefits and perks that are above industry standards. We have a diversified fleet of cranes and training opportunities that will provide the chance for you to learn and grow in your career. Responsibilities: • Repairing and maintaining medium and light-duty vehicles and various types of yard equipment, including pressure washers and small forklifts with a primary focus on the service and repair of said equipment., • Must have a strong background in electrical, drive train, engines, hydraulics, and computer-controlled systems., • Has at least 3 - 5 years of experience in the mechanical diagnosing, repairing, and maintenance of medium and light-duty vehicles focusing on gas and diesel pick-ups., • Will be able to work evenings and weekends for needed repairs in the shop., • Willing to make service calls as needed to “rescue” vehicles incapacitated out away from the shop., • Must be capable of communicating effectively and professionally with supervisors and other personnel., • Able to read schematics, • Must be able to perform competent inspections of all vehicles and small equipment, • Able to lift up to 40 lbs. Qualifications: • Minimum of 3 years of experience repairing and maintaining medium and light-duty pick-ups with gas and diesel engine; vocational training may be considered in lieu of experience, • Ability to perform tasks independently without direct supervision, • Computer literate with the ability to process information, • Valid driver's license and clean driving record, • Strong work ethics with a commitment to quality, • Knowledgeable in troubleshooting various makes and models of medium and light-duty vehicles, • A history of safe work habits, • Hard worker with a great attitude, • Must supply own hand tools and keep up-to-date tool inventory, • Have a clean driving record and can drive a company vehicle, • A high school diploma is required and higher education including vocational training is a plus., • Must be able to keep detailed records of all maintenance and repairs including daily service reports for any and all repairs or maintenance completed Benefits: • Competitive pay and a matching 401(k) plan, • Vacation, Company Holidays, and Sick Days, • Flexible spending accounts/Health savings account Reimbursement plan for the company Bring Your Own Device (BYOD) Policy Bigge provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to Race, Religious Creed, Color, National Origin, Ancestry, Physical or Mental Disability, Medical Condition, Genetic Information, Marital Status, Sex, Gender, Gender Identity, Gender Expression, Sexual Orientation, Military or Veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Job DescriptionWay Engineering is a leading mechanical contractor specializing in commercial HVAC, plumbing, piping, and ongoing maintenance services. With offices in Houston, Austin, Dallas, San Antonio, Charlotte, Nashville, and Raleigh, we are recognized for delivering innovative solutions through design-build/design-assist, preconstruction, commissioning, Building Information Modeling (BIM), and quality control.Our Houston team is seeking an experienced Service Manager to lead commercial service operations and support our growing customer base. Position OverviewThe HVAC Field Supervisor is responsible for leading a team of commercial HVAC service technicians, ensuring service calls, preventive maintenance, and repair work are completed safely, efficiently, and in accordance with company standards. This leadership role is essential for maintaining excellent customer relationships, supporting technicians in the field, and delivering exceptional service. Responsibilities • Supervise, coach, and mentor commercial HVAC service technicians., • Provide technical support and oversight for servicing:, • Air-cooled and water-cooled chillers (screw, centrifugal, scroll, and absorption), • Cooling towers, pumps, and hydronic piping systems, • Boilers, burners, and steam systems, • Packaged rooftop units (RTUs) and air handling units (AHUs), • VAV systems, fan coil units, and building control systems, • Assist technicians with advanced troubleshooting, diagnostics, controls, and system performance issues., • Ensure all work complies with manufacturer specifications, industry standards, and local/state codes., • Conduct quality control inspections, job site safety evaluations, and customer walkthroughs., • Collaborate with Service Managers on labor planning, job costing, scheduling, and technician performance., • Provide technical oversight and coordination for retrofit projects and system upgrades.Qualifications, • 7+ years of commercial HVAC service experience, including hands-on work with chillers, boilers, hydronic systems, and controls., • Minimum of 2 years of experience as a Supervisor, Foreman, or Lead HVAC Technician., • Strong understanding of refrigeration cycles, thermodynamics, and hydronic system operation., • Experience troubleshooting and programming Building Automation Systems (BAS/DDC)., • Ability to read and interpret mechanical drawings, schematics, and service documentation., • EPA Universal Certification required., • OSHA 30 Certification preferred., • Valid driver's license with a clean driving record.Benefits, • Medical, Dental, and Vision Insurance, • Weekly Pay, • 401(k) with Company Match, • Profit Sharing, • Company Vehicle, • Fuel Card, • Company Phone, • Company iPad, • Years of Service Appreciation Program, • Opportunities for Career Growth and Advancement

Job Description Join our team at Lovejoy Mechanical Contractors as a Sr. Commercial Service HVAC Service Technician, where you will have all the tools you need to succeed. We are a reputable company dedicated to providing top-notch HVAC services to commercial clients. We value communication, honesty, hard work, and independence, and we're looking for individuals who share these qualities to represent our company. Job Title: Sr. Commercial HVAC Service Technician Job Type: Full-Time (7:00 am - 4:00 pm, with flexibility to work nights as needed and rotating on call schedule) Salary: DOE, position reports to the Service Manager Lovejoy Mechanical Contractors is located in Houston and has been in business since 1979. We specialize in HVAC service, maintenance, installations, and indoor air quality control. We have seen rapid growth and are currently hiring an experienced Sr. Commercial HVAC Technician to service the Houston area with a minimum of 5 years commercial experience. We are looking for technicians who can assist/handle service and repair of light commercial equipment up to 25-tons. Ideal Candidate Requirements: • Minimum 5-Years Commercial Experience, • Preferred experience diagnosing and servicing split systems and package units, • Preferred experience in refrigeration, electric motors, heating units, hermetic compressors, light commercial furnaces, boilers, burners intake and exhaust fans, economizers, humidifiers, low-temperature application, and controls knowledge., • Preferred experience troubleshooting controls and building automation. Working knowledge of electric controls, VVT, DDC, and programmable thermostat controls of HVAC equipment., • Preferred experience dispatching and/or scheduling technicians., • Good Communication Skills, • Must be organized, punctual and dependable, • Self motivated and ability to work alone with little supervision, • Technical knowledge of equipment and ability to diagnose & troubleshoot systems, • Technical knowledge for start-up and installation of HVAC equipment up to 25-tons, • Have a clean, neat and professional appearance; pride of workmanship in their work, • Flexible and willing to work overtime and occasional out of town work, • Must have DRIVER'S LICENSE IN GOOD STANDING AND GOOD DRIVING RECORD, • Must PASS A BACKGROUND CHECK, • Must be State Registered & EPA certified, • Must have own hand tools, drills, gauges, and some specialized equipment. Benefits: • Year-Round Work, • Benefit Options, including Medical/Dental/Vision, Short & Long Term Disability Plans, • Life Insurance, • Paid Vacation/Paid Holidays, • Company uniforms, • Company Vehicle with Gas Card, • Company paid training and education within field of work, • Personal Tool Replacement Program Schedule: • Day shift: 7AM-4PM or 8AM-5PM; Monday to Friday, • On call 2 weekends per month, • Overtime, • Evening & Weekends as needed, • Out of town service as needed Supplemental Pay: • Overtime pay Work Location: In person Job Type: Full-time Expected hours: 40 per week

Job DescriptionDescription: Make Ready Technician - The Lodge at Spring Shadows At Hilltop Residential, we are proud of our vibrant culture. We are a world-class real estate investment company that provides unparalleled excellence to our customers and investors. Hilltop is dedicated to creating an unforgettable experience not only as a great place to live, but also a great place to work, and we are honored to have received the recognition as a Great Place to Work three years in a row, as well as being named a Top Workplace by the Houston Chronicle! If you want to be a part of a fast-growing company that puts their employees first – Hilltop Residential is it! Hilltop Residential Offers Great Benefits! • Competitive Pay • 401k with Company Match • Comprehensive Medical, Dental and Vision Plans • Paid Life Insurance • Employee Referral Program • Short and Long Term Disability • Paid Time Off • Employee Rent Discount Program • Rapidly Growing Company with Opportunities for Growth Essential Responsibilities • Inspect vacated apartments and complete make ready checklists., • Complete make readies equal to the standards set forth by Hilltop Residential., • Complete assigned work orders and ensure compliance to Hilltop Residential standards., • Assist with building and common area maintenance., • Inspect vacant apartments for damage to walls, doors, blinds, lights, and plumbing fixtures., • Assist with preventative maintenance program and maintain property equipment., • Must be able to paint., • Assist in keeping grounds neat and free of litter. Requirements: • 1+ years of hands-on general maintenance experience, • Availability to work a flexible schedule, including weekends, • Rotating on-call responsibility for after-hours emergencies, • Valid driver's license and/or access to reliable transportation, • EPA license is a plus This role recommends an EPA Universal or HVAC certification. If you meet all other requirements and are chosen for this position, Hilltop Residential will be open to considering helping obtain certification at the appropriate time to invest in your professional development. Applicants are evaluated on the basis of job qualifications—not race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, veteran, marital or domestic partner status, citizenship or any other status or characteristic covered by federal, state or local law.

Job Description Overview Travel Diesel Technician/Mechanic – Houston, TX. $40.00 - $46.00 hr | Weekly Pay | Full Benefits within 30 Days Amerit Fleet Solutions, a leader in fleet maintenance across the U.S., is hiring a skilled Travel Diesel Technician/Mechanic to join our team in Houston, TX. If you enjoy troubleshooting mechanical issues and keeping fleet vehicles running reliably, this is a great opportunity to grow your career with a stable national company. Shift: Monday - Friday (Flexible with some weekend travel required) * 100% Travel Involved * This is a Travel Tech position that requires Diesel and Automotive Experience. This role requires flexibility, as travel may be scheduled on short notice and can result in sudden changes to your work schedule. Candidates should be comfortable adapting to shifting priorities and working in fast-paced, dynamic, and sometimes ambiguous environments. Pay & Schedule Pay: $40.00 – $46.00/hour (based on experience) Pay Frequency: Weekly pay – every Friday Shift: Monday - Friday 6:00am - 2:30pm (Flexible with some weekend travel required) * 100% Travel Involved * Why Technicians Choose Amerit ✔ Weekly Pay – Reliable paycheck every Friday ✔ Benefits Start Fast – Medical, dental, vision within 30 days ✔ 401(k) Match – Plan for your future ✔ Paid Time Off – Vacation, holidays, and sick time ✔ Boot Allowance & Safety Gear Reimbursement ✔ Training Through Amerit University ✔ ASE Certification Reimbursement & Bonuses ✔ Employee Referral Bonuses (Up to $500) ✔ Career Advancement Opportunities Nationwide What You’ll Do • Perform preventive maintenance and repairs on medium to heavy duty fleet vehicles, • Diagnose mechanical and electrical issues, • Conduct inspections to ensure vehicles meet safety and compliance standards, • Accurately document repairs and complete work orders, • Maintain a clean and organized work area, including your tools and equipment, • Follow all safety procedures and company policies, • Collaborate with supervisors and team members to support fleet operations, • Non travel weeks will be spent building Mobile Service Center trucks and completing other projects, • Working closely with Fleet Managers and Senior Fleet Managers., • Perform other duties as required, • Up to 100% travel time What We’re Looking For • 5+ years’ of hands-on experience performing diesel vehicle maintenance and repairs, • Strong diagnostic and troubleshooting skills, • Valid driver’s license, • Ability to own and maintain the personal tools and toolbox required for the role, • Ability to work effectively both independently and as part of a team, • Willingness and ability to meet the physical demands of the position (detailed below), • Ability to successfully pass a DOT physical if required for the role Working Conditions This role involves working in a mobile and or shop environment that may include exposure to dust, diesel fumes, noise, and mechanical irritants such as oils and greases. Technicians must be able to perform essential functions that include lifting heavy objects, accessing tight spaces, and bending, stooping, crouching, or crawling as needed to complete repairs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Ready to Join a Growing Team? Apply today to join Amerit Fleet Solutions and build a career with a company that values safety, reliability, and skilled technicians. https://www.ameritfleetsolutions.com/careers/easy-apply #Mechanic #Hiring #DieselMechanic #NowHiring #DieselTechnicianCareer #MechanicJobs #DieselTechnician #NewTravelDiesel #MediumDuty #HeavyDuty #Ford INDSA

Job DescriptionServerfarm is a leading developer and operator of data centers with over 750+ locations and key customer relationships in 45 countries. We're revolutionizing how data centers operate across North America, Western Europe, and Israel, serving the world's leading technology and hyperscale companies. With Manulife Investment Management's acquisition in 2023 and our award-winning InCommand platform we're positioned for explosive growth as AI adoption and cloud migration drive unprecedented demand for data center capacity. A career at Serverfarm means being at the forefront of digital infrastructure innovation, where your work directly impacts how the world's data is managed and secured. As we target 4x growth over the next four years, you'll have unprecedented opportunities to take on new challenges, develop cutting-edge skills, and grow your career across our expanding global operations. Join our team of innovators and help shape the future of sustainable data centers while building a career without boundaries.Key Accountabilities • Ensure that all MEP plant and distribution infrastructure is operated and maintained in a safe manner, to best industry practice and within manufacturers recommendations., • Monitor power and environmental conditions within all critical spaces within the facility., • Perform assigned maintenance tasks in accordance with SF practices utilizing the internal CMMS., • Assist with planning and scheduling corrective maintenance activities, • Escort and support outside contractors, ensuring they are abiding SF work rules and processes, • Respond to site incidents, execute appropriate MOP/EOP documentation to resolve and/or mitigate issues and communicate to manage throughout event., • Support and follow all SF Change Control policies and procedures., • Perform site rounds and report any issues found to site management., • Participate in construction and commissioning activities as directed by site management, • Adhere to all local, state and federal safety laws and requirements, • Complete other duties as assigned by the management team, • Participate in and support MOP/SOP/EOP documentation process for site., • Participate in and support the development of site policies and standards, • Work with site team members to deliver 100% uptime of critical infrastructure Required Skills, • High school diploma, GED, or equivalent AND preferably 1 year experience working in a Data Center with proven success in delivering customer requirements in a critical technology environment, • Evidence of self-management and alignment with ever-changing priorities, • Good written and oral communication skills, tenacity, and working to a high level of accuracy Serverfarm is committed to providing an equal opportunity workplace and offers paid time off, paid holidays, 401k and FULL coverage medical, dental and vision. Our compensation philosophy rewards employees for achieving the values and objectives aligned with the company’s goals and strategic initiatives. The listed salary range for this position is an estimate based on the competitive job market. Final compensation will be based on your own individual skills, experience, and location. The above statements are intended to describe the general nature and level of work being performed in this role. They are not intended to serve as an exhaustive list of all possible responsibilities and duties. We encourage you to apply even if your experience isn't an exact match to the job description. The listed salary range for this position is an estimate based on the competitive job market. Final compensation will be based on your own individual skills, experience, and location. The above statements are intended to describe the general nature and level of work being performed in this role. They are not intended to serve as an exhaustive list of all possible responsibilities and duties. We encourage you to apply even if your experience isn't an exact match to the job description. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: Unify Energy Solutions is a leading provider of innovative Building Automation Solutions (BAS) that maximize energy efficiency and sustainable building operations. Our solutions control and monitor building functions such as heating, air conditioning and lighting in the education, commercial office, health care, government, and data center markets. If you're dedicated and ambitious, Unify Energy Solutions is the best place to grow your career. Apply today! Job Summary We are seeking a dedicated and experienced HVAC Service Technician to join our dynamic team. You'll be working in the fast-paced, always evolving construction industry, where you will be constantly challenged and given the opportunity to make a big impact. This permanent position offers a fantastic opportunity for those with a passion for problem-solving and a keen interest in the HVAC sector. Duties and Responsibilities As an HVAC Service Technician, you will be responsible for a wide range of tasks including, but not limited to: • Installing, maintaining, and repairing heating, ventilation, cooling, and refrigeration units for both commercial and residential customers. This includes air conditioning systems, chillers, heat pumps, and other HVAC equipment., • Diagnosing and repairing faults in HVAC systems, ensuring they operate at optimal efficiency., • Performing routine maintenance tasks such as replacing filters, lubricating parts, and inspecting electrical wiring., • Responding to emergency call-outs, quickly identifying the problem and implementing a suitable solution., • Providing technical support and advice to customers, explaining complex HVAC issues in a clear, understandable manner., • Ensuring all work is carried out in accordance with company procedures and adheres to health and safety regulations., • Keeping accurate records of work performed, materials used, and reporting any issues encountered. Benefits package available for full-time employees: • Medical, Dental, Vision, Flexible Spending Accounts, 401K, Life/AD&D/LTD, • Competitive Compensation, • Paid Vacation/Sick/Holidays, • In-Office Gym Job Type: • Full-time Job Location: • Houston, TX Unify Energy Solutions, LLC is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected veteran status. Requirements: To be considered for this role, candidates must possess the following qualifications and experiences: • A minimum of 3 years of experience as an HVAC Service Technician., • A thorough understanding of HVAC systems, including installation, maintenance, and repair., • Experience working with commercial HVAC systems and chillers is essential., • Proficiency in diagnosing and fixing mechanical faults., • A valid driver's license and the ability to travel to various job sites., • Strong customer service skills, with the ability to explain complex technical issues in a clear, non-technical manner., • Excellent problem-solving skills and the ability to work under pressure., • Knowledge of current health and safety regulations., • HVAC certification is preferred but not essential.

Job DescriptionDescription: Unify Energy Solutions is a leading provider of innovative Building Automation Solutions (BAS) that maximize energy efficiency and sustainable building operations. Our solutions control and monitor building functions such as heating, air conditioning and lighting in the education, commercial office, health care, government, and data center markets. If you're dedicated and ambitious, Unify Energy Solutions is the best place to grow your career. Apply today! Job Summary We are seeking a dedicated and experienced HVAC Service Technician to join our dynamic team. You'll be working in the fast-paced, always evolving construction industry, where you will be constantly challenged and given the opportunity to make a big impact. This permanent position offers a fantastic opportunity for those with a passion for problem-solving and a keen interest in the HVAC sector. Duties and Responsibilities As an HVAC Service Technician, you will be responsible for a wide range of tasks including, but not limited to: • Installing, maintaining, and repairing heating, ventilation, cooling, and refrigeration units for both commercial and residential customers. This includes air conditioning systems, chillers, heat pumps, and other HVAC equipment., • Diagnosing and repairing faults in HVAC systems, ensuring they operate at optimal efficiency., • Performing routine maintenance tasks such as replacing filters, lubricating parts, and inspecting electrical wiring., • Responding to emergency call-outs, quickly identifying the problem and implementing a suitable solution., • Providing technical support and advice to customers, explaining complex HVAC issues in a clear, understandable manner., • Ensuring all work is carried out in accordance with company procedures and adheres to health and safety regulations., • Keeping accurate records of work performed, materials used, and reporting any issues encountered. Benefits package available for full-time employees: • Medical, Dental, Vision, Flexible Spending Accounts, 401K, Life/AD&D/LTD, • Competitive Compensation, • Paid Vacation/Sick/Holidays, • In-Office Gym Job Type: • Full-time Job Location: • Houston, TX Unify Energy Solutions, LLC is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected veteran status. Requirements: To be considered for this role, candidates must possess the following qualifications and experiences: • A minimum of 3-5 years of experience as an HVAC Service Technician., • A thorough understanding of HVAC systems, including installation, maintenance, and repair., • Experience working with commercial HVAC systems and chillers is essential., • Proficiency in diagnosing and fixing mechanical faults., • A valid driver's license and the ability to travel to various job sites., • Strong customer service skills, with the ability to explain complex technical issues in a clear, non-technical manner., • Excellent problem-solving skills and the ability to work under pressure., • Knowledge of current health and safety regulations., • HVAC certification is preferred but not essential.

Job DescriptionWay Engineering is located in Houston, Austin, San Antonio, Dallas, and Nashville. We specialize in commercial air conditioning, plumbing, piping, and the ongoing maintenance of these systems. Way Engineering is at the forefront of design build/design assist, pre-construction, commissioning, building information modeling (BIM), and quality control. We are seeking a Union Service HVAC Chiller Technician to join our team!Responsibilities: • Diagnose HVAC, refrigeration, and performance through observation, testing, and setup, • Ability to perform troubleshooting and preventative maintenance, • Operate hand tools, power tools, gauges, and measuring equipment, • Complete electronic documentation of service-related tasks, materials, and labor hours, • Be able to explain the service charges and work performed to the satisfaction of our customers, • Maintain inventory stock on the service vehicle, • Reconcile work order documents, vendor packing slips, and weekly time sheets for supervisor reviewQualifications:, • 5+ years of Commercial HVAC Chiller Technician experience, • Ability to follow construction plans and specifications for proper installation and repair, • Must have a valid EPA Card and TDLR, • Must be able to pass a drug screen, • Must have a valid driver’s license and a good driving record, • Stable work history showing responsibility and professional growth, • Ability to competently use a variety of gauges, meters, and measuring instruments, • Ability to effectively communicate with peers, supervisors, and the customer., • This position requires driving on company time for company-related tasks. All candidates are subject to a driving background check prior to hire Perks of the Trade:, • Health Benefits, • Referral Bonuses, • Weekly Pay, • Profit Sharing Program, • 401k, • 7 Paid Holidays, • Paid Vacation, • Years of Service Appreciation Program

Job Description HVAC Service Technician Job Details Job Type Full-time Houston, TX Description This is a full-time, direct placement for Gregory-Edwards, Inc. Job Overview: We are seeking a skilled and experienced Commercial HVAC Service Technician to join our team. As a Commercial HVAC Service Technician, you will be responsible for installing, maintaining, and repairing heating, ventilation, and air conditioning (HVAC) systems in commercial buildings. Your expertise in troubleshooting and repairing complex HVAC systems will be crucial in ensuring the comfort and safety of our clients. The ideal candidate will possess strong technical skills, a customer-focused approach, and the ability to work independently and as part of a team. Responsibilities: • Install, repair, and maintain commercial HVAC systems, including heating, ventilation, and air conditioning units, boilers, chillers, pumps, and related equipment., • Perform routine maintenance tasks, such as inspecting and cleaning systems, replacing filters, lubricating parts, and checking for leaks or malfunctions., • Diagnose and troubleshoot HVAC system issues, including electrical, mechanical, and refrigeration components, using specialized tools and equipment., • Repair or replace defective components or parts, such as compressors, motors, fans, thermostats, control boards, valves, and coils., • Conduct thorough inspections of HVAC systems to identify potential problems and recommend appropriate solutions to enhance system performance and energy efficiency., • Collaborate with customers to understand their HVAC needs and provide professional advice and recommendations regarding system upgrades, replacements, or repairs., • Maintain accurate records of service calls, including documenting all work performed, parts used, and time spent on each job., • Comply with safety regulations and company policies at all times, ensuring the use of proper safety equipment and following established procedures., • Keep abreast of industry trends, new technologies, and advancements in HVAC systems through ongoing training and professional development. Requirements Experience and Qualifications: • Valid HVAC technician license or certification (e.g., EPA 608 certification)., • 5-10 years of proven experience as a Commercial HVAC Service Technician, with a strong understanding of commercial HVAC systems and components., • Proficiency in diagnosing and troubleshooting HVAC equipment, including electrical, mechanical, and refrigeration systems., • Knowledge of local building codes, regulations, and industry standards related to HVAC installation, maintenance, and repair., • Familiarity with various HVAC controls and building automation systems (BAS)., • Strong analytical and problem-solving skills, with the ability to work independently and make sound decisions., • Excellent customer service and communication skills, with the ability to explain complex technical concepts to non-technical individuals., • Physical stamina and ability to lift heavy equipment and work in confined spaces., • Valid driver's license and clean driving record.

Job DescriptionCommercial HVAC Service Technician$28–$38/Hour + Spiffs & Bonuses | 40+ Hours | Overtime AvailableHouston, TXEnvironmental Air Systems, Inc. is looking for an experienced Commercial HVAC Service Technician to join our Houston-area field team. This is an opportunity to work on a broad range of commercial HVAC and refrigeration equipment while building a long-term career with an established, Texas-owned company.For more than 43 years, we've earned the trust of our customers through dependable service, quality workmanship, and straightforward business practices. We're proud to remain locally owned and operated with no private equity ownership, allowing our employees to directly contribute to the customers and communities we serve.We invest in our technicians through training, hands-on experience, and opportunities to expand their capabilities within the trade.The WorkThis is a hands-on commercial service position for a technician who enjoys troubleshooting equipment and tackling challenging mechanical and refrigeration problems.You'll work with a variety of commercial systems, including:Chilled water systemsCommercial package unitsLow-temperature refrigerationIce machinesCommercial HVAC equipmentOther mechanical and refrigeration systemsKey ResponsibilitiesDiagnose equipment failures and determine effective repair solutions.Troubleshoot electrical, mechanical, HVAC, and refrigeration-related issues.Complete service repairs and preventative maintenance on commercial equipment.Evaluate equipment performance and identify potential problems.Service and troubleshoot chilled water and refrigeration systems.Accurately document service calls, repairs, and equipment information using company technology.Communicate findings and recommendations clearly with customers.Maintain a professional approach while representing Environmental Air Systems in the field.Work alongside other technicians and team members to maintain high service standards.Compensation & HoursWe offer competitive hourly pay along with additional opportunities to increase your earnings.$28–$38 per hour, based on experiencePerformance-based spiffs and bonusesMonday–Friday schedule40+ hours per weekOvertime available as neededAutomatic overtime pay for work performed before 6:00 AM or after 6:00 PMWhat You BringWe're looking for an experienced commercial technician with the technical foundation to independently diagnose and service a variety of HVAC and refrigeration equipment.Required:3–5+ years of commercial HVAC service experienceStrong commercial HVAC troubleshooting abilitiesExperience with chilled water systems and refrigerationEPA Universal CertificationTexas Technician RegistrationValid driver's licenseInsurable driving recordPreferred:Experience servicing ice machinesAdvanced refrigeration experienceHVAC trade school education or formal technical trainingBenefits That Support Your CareerWe provide the tools and benefits needed to make this a long-term opportunity:Company-provided service vehicleMultiple medical insurance optionsHSA plan options0% coinsurance plan optionsPaid vacationPaid holidaysCompany uniformsCompany tabletTool assistance programContinued technical trainingCareer development and advancement opportunitiesSIMPLE IRA retirement plan with company matchStable, year-round employment with an established local companyWhy Environmental Air Systems?At Environmental Air Systems, you're joining a company with more than four decades of experience and a genuine commitment to the HVAC trade. Our leadership remains actively involved in the industry, and we're focused on helping our technicians continue learning and advancing.If you're a commercial HVAC service professional looking for strong hourly pay, bonus opportunities, overtime, quality benefits, and a locally owned company that invests in its technicians, we'd like to talk with you.Apply today and take the next step in your commercial HVAC career with Environmental Air Systems, Inc.Candidates will be required to pass a background check and drug test upon being given a conditional offer of employment.

Job Description This position is located Richmond, TX. We are seeking a Plumber to join our team! The selected individual will install and repair water supply lines and drainage systems. Residential plumbing ground, topout and trim. Responsibilities: • Assemble and install plumbing systems, • Troubleshoot and repair pipe and pipeline systems, • Review blueprints and building codes to determine optimal work procedures, • Maintain and repair septic and commercial sewer systems, • Prepare written work cost estimates for clients, • Adhere to safety policies and procedures Qualifications: • Previous experience in plumbing, maintenance, or other related field, • Ability to read blueprints and schematics, • Ability to handle physical workload, • Strong troubleshooting and critical thinking skills, • Excellent written and verbal communication skills\nCompany Description We are a local privately owned plumbing company with many years of experience. We are a local privately owned plumbing company with many years of experience.

Job DescriptionDuties: The Building Technician V (HVAC/R) maintains and repairs all types of large, analog and digitally controlled HVAC/R systems including, but not limited to centrifugal and reciprocating chilled water systems, air cooled chillers, heat pumps and all ancillary equipment, including pumps and variable Speed Drives (VFD's). Maintain and provide for the safe condition and operation of all HVAC/R systems in City of Pasadena facilities. Diagnose and repair malfunctions in various types of heating and air conditioning systems, including chillers, boilers, large split, rooftop systems and refrigeration equipment throughout the City. Repair, replace or calibrate controls, thermostats, switches, fuses and electrical wiring. Wire and connect motors, compressors, temperature controls and humidity sensors according to wiring schematics. Maintain refrigerant dispensing recording to meet federal EPA requirements. Maintain preventative maintenance schedules and procedures for all HVAC equipment including filters, belts and coil cleaning. Receive and complete work orders in a timely and efficient manner. Maintain accurate records on materials and labor used. Inspect jobs upon completion to ensure areas are clean. Detect needed repairs on equipment following inspections procedures. Respond to emergency calls as needed. Perform general cleaning/maintenance tasks necessary to keep vehicles, equipment, and tools in clean operable condition. Perform all duties and work assignments in accordance with City policies and procedures. Work the assigned schedule and comply with City timekeeping and attendance policy. Must have and maintain, without interruption, all necessary licenses, certifications, clearances, and/or job requirements. Other duties as assigned out of HVAC/R.Qualifications: High school diploma or GED. (5) Five years' experience in HVAC/R field. EPA certification and Texas driver's license required. Texas air conditioning and refrigeration contractor license or technician certification.The City of Pasadena offers very generous benefits to all full-time employees. For example:Employee-only medical insurance starts as low as $15 per month and the most expensive Employee & Family plan is less than $350 per month.The City has its own medical clinic staffed with a M.D. and two medical assistants. Employees and their covered dependents over the age of 5 can visit the clinic FREE OF CHARGE. Employees and their covered dependents also have access to Virtual Visits with a medical professional FREE OF CHARGE.The City offers college tuition reimbursement of up to $3,500 per year.As an employee, you will contribute a portion of your salary each pay-period towards your retirement and the City will match your contribution by 200%. Example, if you contribute $100, the City will contribute $200.Civilian employees accumulate vacation at the following rates:Less than 6 years of service - two weeks of vacation per year.From 6 to less than 11 years of service - three weeks of vacation per year.From 11 to less than 21 years of service – four weeks of vacation per year.From 21 to less than 26 years of service – five weeks of vacation per year.From 26 years of service and up – six weeks of vacation per year. Job Posted by ApplicantPro

Job Description AP Specialist Immediate Opportunity - Hiring NOW! Contract to Hire (IN-OFFICE ROLE) Pay $23-25 hourly - depending on experience Great Pasadena location with a Brand-new office! Zip code 77503 Accounts Payable Specialist position is responsible for compiling and maintaining AP. Essential Functions • Process expense invoices by charging expenses to accounts and cost centers by analyzing invoice/expense reports and then submit for appropriate approval to process for payment, • Pay employees by receiving and verifying expense reports and requests for prepayments;, • Prepare checks and execute check runs, • Verify vendor accounts by reconciling monthly statements and related transactions, • Scan processed invoices, • Report sales taxes by calculating requirements on paid invoices, • Protect organization’s value by keeping information confidential, • Create bank wire templates, set-up wire templates, and verify/release wire in the bank, • Perform Vendor Maintenance, • Issue and replenish petty cash, • Verify and reconcile counter sales drawers and ship tickets, • Print, obtain signatures and distribute on all accounts payable checks, • Act as liaison for accounts payable departments between our corporate offices and external branches, • Answer all vendor inquiries, • Maintain all accounts payable reports, spreadsheets, and corporate accounts payable files., • Assemble and process overnight shipments to branches., • Assist in monthly closings, • Perform additional assignments at supervisor’s discretion Competencies • Strong Microsoft Excel, Word, and 10-key-by-touch skills, • Basic accounting principles knowledge, • 2+ years of like experience in Accounts Payable \nCompany Description Professional Alternatives is a leading staffing firm specializing in all levels of corporate administrative and professional support, as well as executive placement. Starting in 1998, the Professional Search Group has a successful track record of providing local and national staffing-related support to a multitude of industries. We pride ourselves on building lasting relationships with each client and candidate, and our hands-on approach allows us to make the best long-term match for both. Professional Alternatives is a leading staffing firm specializing in all levels of corporate administrative and professional support, as well as executive placement. Starting in 1998, the Professional Search Group has a successful track record of providing local and national staffing-related support to a multitude of industries. We pride ourselves on building lasting relationships with each client and candidate, and our hands-on approach allows us to make the best long-term match for both.

Line of Business: Service & Support About Us Heidelberg Materials is one of the largest suppliers of building materials worldwide. In North America, the company operates more than 450 locations throughout the United States and Canada, employing approximately 9,000 people. What You'll Be Doing Monitor and control the cement manufacturing process from the Remote Optimization Center, based in Dallas, Texas. Review equipment status, process parameters, and alarms to ensure the plant operates within defined parameters and adheres to standard operating procedures. Ensure safe and continuous plant operations, maintaining product quality, and complying with environmental regulations. This is achieved through close coordination with plant personnel and other HROC staff. Identify and troubleshoot process and equipment issues, resolving them promptly by collaborating with plant and HROC teams to minimize downtime and production losses. Maintain accurate and up-to-date records of process parameters, equipment readings, and operational activities. These records support the analysis of operational data to detect trends, inefficiencies, and opportunities for improvement. What Are We Looking For Proven ability to safely operate a cement plant in a 24/7 environment, with extensive control room experience, disciplined decision making, strong understanding of kiln and mill processes, and familiarity with process control systems required to remotely operate a complex plant. Bachelor of Science/Engineering degree, preferably in Chemical, Industrial, or Manufacturing. Technical certifications or vocational training in process operations or a related field may be substituted for a degree. Strong analytical and problem-solving skills and attention to detail and a high degree of accuracy and precision. Excellent communication and the ability to collaborate effectively with maintenance, engineering, and production personnel. Ability to work 12-hour rotating shifts including nights, and weekends. Ability to travel within the United States and Canada as required. What We Offer Competitive base salary ranging from $84,900 to $113,193, and participation in our annual incentive plan. 401(k) retirement savings plan with an automatic company contribution as well as matching contributions. Highly competitive benefits programs are offered, including: Medical, Dental, and Vision coverage along with Prescription Drug Benefits. Health Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA). AD&D, Short- and Long-Term Disability Coverage, as well as Basic Life Insurance. Paid Bonding Leave, 15 days of Paid Vacation and 40 hours of Paid Sick Leave. Equal Opportunity Employer – Minority / Female / Veteran / Disabled As part of our hiring process, we may use AI-assisted tools to support the screening and evaluation of candidate applications and interviews. These tools help streamline the initial assessment, but all decisions about candidate advancement are made by human recruiters and hiring managers. While technology supports early steps, every interview will be handled by experienced recruiters and hiring managers to provide a personal touch.

Line of Business: Service & Support About Us: Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What you will be doing: Provide 24/7 Remote Monitoring, Operation, and Control of Plant Processes Provide continuous remote monitoring, operation, and control of cement and grinding plants across the United States and Canada from Heidelberg Materials’ centralized HROC operations center in Irving, TX Actively optimize cement manufacturing processes and assigned plant equipment using advanced control systems, automation platforms, and real-time data interfaces. Analyze process conditions, instrumentation data, alarms, and system trends to ensure stable, safe, and efficient operation within defined operating limits, while taking timely control actions as required. Make Critical Operational Decisions in a Highly Automated Environment In coordination with the plant, exercise sound operational judgment and decision-making authority in response to process deviations, alarms, and abnormal conditions, executing corrective actions in line with established procedures, escalation protocols, and safety requirements. Operate within a highly automated, data-driven environment leveraging advanced process control, predictive analytics, and AI-enabled tools to drive performance outcomes while maintaining full accountability for actions taken. Troubleshoot and Resolve Process, Equipment, and Control System Issues Identify, diagnose, and resolve process inefficiencies, equipment malfunctions, and control system issues in real time. Collaborate closely with plant operations, process engineering, systems engineering, reliability teams, and other HROC resources to stabilize operations, minimize downtime, protect production, and sustain safe and reliable plant performance. Collaborate Across the HROC Network to Optimize System Performance Share best practices, transfer operational learnings, and optimize overall system performance. Work across HROC and plant teams to identify common challenges, replicate proven solutions, and support consistent performance improvement. Champion Standard Operating Procedures (SOPs) and Operational Consistency Champion SOPs to ensure consistency, reliability, safety, and efficiency in remote operations. Support the development, application, and continuous improvement of standardized procedures, escalation protocols, operating playbooks, and best-practice routines. Drive Continuous Optimization and Automation Strategies Support and actively contribute to the deployment and refinement of advanced automation strategies, improve process stability, throughput, energy efficiency, reliability, and cost performance. Identify and implement improvement opportunities through data analysis, operational insights, and cross-plant knowledge sharing. Leverage Data to Improve Performance and Standardization Use data to identify trends, inefficiencies, recurring issues, and improvement opportunities. Drive standardization and replication of best practices by sharing insights, learnings, and performance improvement actions across the HROC network. Ensure Safe, Stable, and Compliant Operations Ensure the safe, continuous, and compliant operation of plant processes, maintaining adherence to safety procedures, operating standards, environmental requirements, and quality targets. What Are We Looking For: Bachelor of Science/Engineering degree, preferably Chemical, Industrial or Manufacturing. Technical certifications or vocational training in process operations or a related field may substitute for a degree. Previous experience in a similar industrial environment is desirable, but not required due to the comprehensive training program. This position offers a unique opportunity for a 6-to-8-month training period that includes comprehensive training in the cement manufacturing process/equipment and key responsibilities. Strong analytical and problem-solving skills and attention to detail, with a high degree of accuracy and precision. Excellent communication and the ability to collaborate with maintenance, engineering, and production personnel. Ability to work rotating 12-hour day/night shifts, weekends, and holidays to sustain uninterrupted plant operations. Ability to travel in both the United States and Canada as required. What We Offer: Competitive base salary and participation in our annual incentive plan. 401(k) retirement savings plan with an automatic company contribution as well as matching contributions. Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Saving Savings Account (HSA), Health Reimbursement - Account (HRA) and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Equal Opportunity Employer - Minority / Female / Veteran / Disabled As part of our hiring process, we may use AI-assisted tools to support the screening and evaluation of candidate applications and interviews. These tools help streamline the initial assessment, but all decisions about candidate advancement are made by human recruiters and hiring managers. While technology supports early steps, every interview will be handled by experienced recruiters and hiring managers to provide a personal touch.

Job DescriptionWay Engineering is located in Houston, Austin, San Antonio, Dallas, and Nashville. We specialize in commercial air conditioning, plumbing, piping, and the ongoing maintenance of these systems. Way Engineering is at the forefront of design build/design assist, pre-construction, commissioning, building information modeling (BIM), and quality control. We are seeking a Union Service HVAC Technician to join our team! Responsibilities: • Diagnose HVAC performance through observation, refrigeration, testing, and setup, • Ability to troubleshoot commercial equipment, • Operate power tools, hand tools, gauges, and measuring equipment to perform service on the equipment, • Be able to track service-related tasks, materials, and labor hours on the company-provided iPad, • Ability to communicate effectively with customers and managementQualifications:, • Preferred 5+ Years Commercial HVAC Experience, • Preferred 5+ years of experience in HVAC maintenance/repair, • Ability to follow a scope, • Must be able to pass a drug screen, • Must have a valid driver’s license in the state in which you are applying and a good driving record, • Ability to understand the use of gauges, meters, measuring instruments, and hand/power tools, • Must have EPA Benefits:, • Competitive pay, • Medical, Dental, Vision, • 401K, Retirement, • Company Vehicle, • Fuel card, • iPhone and iPad, • Paid Time Off, • 7 Days Holiday Pay, • Years of Service Appreciation Program

Job DescriptionElevate the health of our communityAbout the Position A Plumber in Facilities Engineering at Harris Health performs preventative maintenance, troubleshooting, and repairs to Plumbing systems at our hospital. You will install, maintain, and repair various plumbing systems under the direction of the Facilities Engineering department. This may include troubleshooting systems, replacing or repairing malfunctioning fixtures, and installing new pipes. About Harris Health System Harris Health is a nationally recognized health system comprising three teaching hospitals and an extensive network of ambulatory care centers serving the people of Harris County, Texas, since 1966. Staffed by the faculty, fellows and residents from two nationally ranked medical schools, Baylor College of Medicine and The University of Texas Health Science Center at Houston (UTHealth), Harris Health is the first healthcare system in Houston to receive the prestigious National Committee for Quality Assurance (NCQA) designation for its network of patient-centered medical homes, and both LBJ and Ben Taub Hospitals earned the ANCC Magnet Designation in 2020. Each year, Harris Health provides more than 1.8 million total outpatient visits through its more than 40 ambulatory care facilities. Additionally, Harris Health sees more than 177,000 emergency visits at its Level 1 and Level 3 trauma centers and 35,000 hospital admissions through its three hospitals: Ben Taub, LBJ and Quentin Mease. Requirements • High School Diploma or GED, • Journeyman level license or equivalent certification, • 1st Grade Stationary Engineering from the City of Houston accepted, • Trade/Craft specific licensure or certification accepted, • 4 years of building maintenance experience preferred, • Valid Texas Driver's License preferred, • Ability to pass skill assessment established by the Facilities Engineering DepartmentBenefits, • Day 1 Benefits - Benefits are available the first day of hire, • $10k student loan repayment, • Shift differentials (Evenings, Nights, Weekends, Holidays), • Medical, Dental and Vision insurance, • Flexible spending accounts (FSAs), • Short- and Long-Term Disability insurance, • Life insurance, • 401(k) retirement plan, • Employee assistance program, • Subsidized parking, • Credit union, • Employee disaster relief, • Tuition Reimbursement - After 6 months of employment, • and more! Harris Health is an Equal Opportunity Employer that welcomes and encourages diversity in the workplace.Apply today.Our short application process takes less than 3 minutes on your phone, tablet or computer. Powered by JazzHR 1VXJTkdtIE

Job DescriptionDuties: The Building Technician V (Plumbing) is responsible for performing master/journeyman level skilled work installing, maintaining and repairing plumbing heating systems. Installs gas lines in buildings, services heating and cooling systems and installs and maintains lavatories, commodes and water heaters. Install new plumbing including pipes, valves, drains basins, tubs, faucets, lavatories, sinks, drinking fountains, hot water heaters and a wide variety of other plumbing fixtures, facilities and equipment. Repair old plumbing including fixtures and pipelines, renew washers and valves, clean and open traps, drains and other lines. Solder and repair copper pipes. Complete daily work order reports and other related paperwork. Prepare estimates on time and materials required for a job. Conduct preventative maintenance on sump pumps. Assist annual inspections and testing. Must have and maintain, without interruption, all necessary licenses, certifications, clearances, and/or job requirements. Work the assigned schedule and comply with City timekeeping and attendance policy. Other duties as assigned.Qualifications: High School Diploma or GED. Two (2) years' experience in the plumbing trade. Possess a current Texas Master/Journeyman Plumbers License. Valid Texas Driver's License. PREFERRED: Back Flow Certification. Will be asked to obtain a fork lift certification provided by the City of Pasadena. First Aid Certification is a plus.The City of Pasadena offers very generous benefits to all full-time employees. For example:Employee-only medical insurance starts as low as $15 per month and the most expensive Employee & Family plan is less than $350 per month.The City has its own medical clinic staffed with a M.D. and two medical assistants. Employees and their covered dependents over the age of 5 can visit the clinic FREE OF CHARGE. Employees and their covered dependents also have access to Virtual Visits with a medical professional FREE OF CHARGE.The City offers college tuition reimbursement of up to $3,500 per year.As an employee, you will contribute a portion of your salary each pay-period towards your retirement and the City will match your contribution by 200%. Example, if you contribute $100, the City will contribute $200.Civilian employees accumulate vacation at the following rates:Less than 6 years of service - two weeks of vacation per year.From 6 to less than 11 years of service - three weeks of vacation per year.From 11 to less than 21 years of service – four weeks of vacation per year.From 21 to less than 26 years of service – five weeks of vacation per year.From 26 years of service and up – six weeks of vacation per year. Job Posted by ApplicantPro

NCCCO Certificate Required Position Purpose: The CDL Driver & Crane Operator at SRS Building Products ensures safe, efficient transport and delivery of building materials to job sites within a 200-mile radius. Responsibilities include operating trucks, cranes, and forklifts; performing DOT-compliant inspections; coordinating with rooftop loaders; and maintaining accurate documentation. The role also involves customer interaction and warehouse support to uphold service and safety standards. Key Responsibilities: • Safely deliver building materials within a 200-mile radius, following company policies., • Perform pre- and post-trip inspections, operate cranes and forklifts, and coordinate with rooftop loaders to ensure accurate, damage-free deliveries., • Verify inventory, document deliveries with photos, and assess job sites for safety risks. Physical Requirements: • This physically demanding role requires regularly lifting up to 100 pounds and working outdoors in varied weather., • Candidates must safely operate commercial vehicles and cranes, navigate ladders and confined spaces, and tolerate high noise levels., • Routine tasks include driving, material handling, and adhering to all safety regulations., • Climb ladders and work at heights, • Accommodations are available via ADA, and the company is committed to equal opportunity and an inclusive workplace. Minimum Qualifications: • Valid CDL driver’s license with air brakes endorsement, • Proficiency in performing routine maintenance and safety checks, • Knowledge of basic mechanical systems, • Experience operating conveyor belts, knuckle booms, or crane-equipped trucks, • Forklift operation experience; certification preferred, • Knowledge of DOT regulations and OSHA safety standards, • Proficient in English (reading, writing, and verbal communication), • Capable of conducting job site inspections and reporting conditions, • Strong adherence to safety protocols, • Clean driving record (no hit-and-run, DWI, or DUI in the past 36 months), • Must pass background check and drug screening Minimum Education: High school diploma or equivalent. Certifications: • Current DOT medical certificate, • NCCCO Crane Certification: ABC/ABL certification is required., • Truck Crane Operation Certification: Preferred but not mandatory., • Telescopic Boom - Fixed Cab Certification: Preferred but not mandatory., • Boom Truck - Fixed Cab Certification: Preferred but not mandatory., • Articulating Boom Crane Certification: Preferred but not mandatory. Job Location: SRS Building Products - Houston 12400 Taylor Road Houston, TX 77041 As an Equal Employment Opportunity (EEO) employer SRS Distribution Inc., including all its subsidiaries, provides job opportunities to qualified individuals without regard to actual or perceived race, color, creed, religion, national origin, sex, gender, age, disability, gender identity, sexual orientation, citizenship status, uniform service, veteran status, marital status, genetic information, physical or mental disability, or any other characteristic in accordance with applicable federal, state, and local EEO laws. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at US: 855.556.3221, or by email to: HR@Help.SRSDistribution.com with the nature of your accommodation request and include the Business name, location and title of the job opening. Please allow one (1) business day for a reply. All employment offers are contingent upon successful completion of a background check and drug screen, as permitted by law.Competitive weekly/bi-weekly pay, discretionary bonuses, 401(k) with company match, Employee Stock Purchase Plan, paid time off (vacation, sick, volunteer, holidays, birthday, floating), medical/dental/vision, flexible spending accounts, company-paid life and short-term disability, plus optional long-term disability, and additional life insurance. All benefits subject to eligibility. ‎ Should a Candidate be submitted to fill a position by a recruiting or staffing services agency (“Agency”), the Company has no obligation to pay the Agency any fee for submission, offer, placement or any service without a fully executed contract of service covering the engagement. • Competitive salaries for all team members paid weekly, • 401(k) Retirement Plan with company matching, • Employee Stock Purchase Program, • Paid Vacation, Sick Time, Volunteer Day, Holidays, Birthday, and Floating Holidays, • Paid Parental Leave, Adoption Assistance Program, • Medical, Dental and Vision Benefits, • Flexible and Dependent Care Spending Accounts, • Company paid Life insurance and Short-Term Disability, • Additional Life Insurance and Long-Term Disability also offered, • Mental, Physical and Emotional Well-Being Programs for Employees and Families, • Wellness Program and Safety Program with Bonuses for our Drivers, • Employee Referral Bonus Program

NCCCO Certificate Required Position Purpose: The CDL Driver & Crane Operator at SRS Building Products ensures safe, efficient transport and delivery of building materials to job sites within a 200-mile radius. Responsibilities include operating trucks, cranes, and forklifts; performing DOT-compliant inspections; coordinating with rooftop loaders; and maintaining accurate documentation. The role also involves customer interaction and warehouse support to uphold service and safety standards. Key Responsibilities: • Safely deliver building materials within a 200-mile radius, following company policies., • Perform pre- and post-trip inspections, operate cranes and forklifts, and coordinate with rooftop loaders to ensure accurate, damage-free deliveries., • Verify inventory, document deliveries with photos, and assess job sites for safety risks. Physical Requirements: • This physically demanding role requires regularly lifting up to 100 pounds and working outdoors in varied weather., • Candidates must safely operate commercial vehicles and cranes, navigate ladders and confined spaces, and tolerate high noise levels., • Routine tasks include driving, material handling, and adhering to all safety regulations., • Climb ladders and work at heights, • Accommodations are available via ADA, and the company is committed to equal opportunity and an inclusive workplace. Minimum Qualifications: • Valid CDL driver’s license with air brakes endorsement, • Proficiency in performing routine maintenance and safety checks, • Knowledge of basic mechanical systems, • Experience operating conveyor belts, knuckle booms, or crane-equipped trucks, • Forklift operation experience; certification preferred, • Knowledge of DOT regulations and OSHA safety standards, • Proficient in English (reading, writing, and verbal communication), • Capable of conducting job site inspections and reporting conditions, • Strong adherence to safety protocols, • Clean driving record (no hit-and-run, DWI, or DUI in the past 36 months), • Must pass background check and drug screening Minimum Education: High school diploma or equivalent. Certifications: • Current DOT medical certificate, • NCCCO Crane Certification: ABC/ABL certification is required., • Truck Crane Operation Certification: Preferred but not mandatory., • Telescopic Boom - Fixed Cab Certification: Preferred but not mandatory., • Boom Truck - Fixed Cab Certification: Preferred but not mandatory., • Articulating Boom Crane Certification: Preferred but not mandatory. Job Location: SRS Building Products - Houston 12400 Taylor Road Houston, TX 77041 As an Equal Employment Opportunity (EEO) employer SRS Distribution Inc., including all its subsidiaries, provides job opportunities to qualified individuals without regard to actual or perceived race, color, creed, religion, national origin, sex, gender, age, disability, gender identity, sexual orientation, citizenship status, uniform service, veteran status, marital status, genetic information, physical or mental disability, or any other characteristic in accordance with applicable federal, state, and local EEO laws. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at US: 855.556.3221, or by email to: HR@Help.SRSDistribution.com with the nature of your accommodation request and include the Business name, location and title of the job opening. Please allow one (1) business day for a reply. All employment offers are contingent upon successful completion of a background check and drug screen, as permitted by law.Competitive weekly/bi-weekly pay, discretionary bonuses, 401(k) with company match, Employee Stock Purchase Plan, paid time off (vacation, sick, volunteer, holidays, birthday, floating), medical/dental/vision, flexible spending accounts, company-paid life and short-term disability, plus optional long-term disability, and additional life insurance. All benefits subject to eligibility. ‎ Should a Candidate be submitted to fill a position by a recruiting or staffing services agency (“Agency”), the Company has no obligation to pay the Agency any fee for submission, offer, placement or any service without a fully executed contract of service covering the engagement. • Competitive salaries for all team members paid weekly, • 401(k) Retirement Plan with company matching, • Employee Stock Purchase Program, • Paid Vacation, Sick Time, Volunteer Day, Holidays, Birthday, and Floating Holidays, • Paid Parental Leave, Adoption Assistance Program, • Medical, Dental and Vision Benefits, • Flexible and Dependent Care Spending Accounts, • Company paid Life insurance and Short-Term Disability, • Additional Life Insurance and Long-Term Disability also offered, • Mental, Physical and Emotional Well-Being Programs for Employees and Families, • Wellness Program and Safety Program with Bonuses for our Drivers, • Employee Referral Bonus Program

NCCCO Certificate Required Position Purpose: The CDL Driver & Crane Operator at SRS Building Products ensures safe, efficient transport and delivery of building materials to job sites within a 200-mile radius. Responsibilities include operating trucks, cranes, and forklifts; performing DOT-compliant inspections; coordinating with rooftop loaders; and maintaining accurate documentation. The role also involves customer interaction and warehouse support to uphold service and safety standards. Key Responsibilities: • Safely deliver building materials within a 200-mile radius, following company policies., • Perform pre- and post-trip inspections, operate cranes and forklifts, and coordinate with rooftop loaders to ensure accurate, damage-free deliveries., • Verify inventory, document deliveries with photos, and assess job sites for safety risks. Physical Requirements: • This physically demanding role requires regularly lifting up to 100 pounds and working outdoors in varied weather., • Candidates must safely operate commercial vehicles and cranes, navigate ladders and confined spaces, and tolerate high noise levels., • Routine tasks include driving, material handling, and adhering to all safety regulations., • Climb ladders and work at heights, • Accommodations are available via ADA, and the company is committed to equal opportunity and an inclusive workplace. Minimum Qualifications: • Valid CDL driver’s license with air brakes endorsement, • Proficiency in performing routine maintenance and safety checks, • Knowledge of basic mechanical systems, • Experience operating conveyor belts, knuckle booms, or crane-equipped trucks, • Forklift operation experience; certification preferred, • Knowledge of DOT regulations and OSHA safety standards, • Proficient in English (reading, writing, and verbal communication), • Capable of conducting job site inspections and reporting conditions, • Strong adherence to safety protocols, • Clean driving record (no hit-and-run, DWI, or DUI in the past 36 months), • Must pass background check and drug screening Minimum Education: High school diploma or equivalent. Certifications: • Current DOT medical certificate, • NCCCO Crane Certification: ABC/ABL certification is required., • Truck Crane Operation Certification: Preferred but not mandatory., • Telescopic Boom - Fixed Cab Certification: Preferred but not mandatory., • Boom Truck - Fixed Cab Certification: Preferred but not mandatory., • Articulating Boom Crane Certification: Preferred but not mandatory. Job Location: SRS Building Products - Houston 12400 Taylor Road Houston, TX 77041 As an Equal Employment Opportunity (EEO) employer SRS Distribution Inc., including all its subsidiaries, provides job opportunities to qualified individuals without regard to actual or perceived race, color, creed, religion, national origin, sex, gender, age, disability, gender identity, sexual orientation, citizenship status, uniform service, veteran status, marital status, genetic information, physical or mental disability, or any other characteristic in accordance with applicable federal, state, and local EEO laws. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at US: 855.556.3221, or by email to: HR@Help.SRSDistribution.com with the nature of your accommodation request and include the Business name, location and title of the job opening. Please allow one (1) business day for a reply. All employment offers are contingent upon successful completion of a background check and drug screen, as permitted by law.Competitive weekly/bi-weekly pay, discretionary bonuses, 401(k) with company match, Employee Stock Purchase Plan, paid time off (vacation, sick, volunteer, holidays, birthday, floating), medical/dental/vision, flexible spending accounts, company-paid life and short-term disability, plus optional long-term disability, and additional life insurance. All benefits subject to eligibility. ‎ Should a Candidate be submitted to fill a position by a recruiting or staffing services agency (“Agency”), the Company has no obligation to pay the Agency any fee for submission, offer, placement or any service without a fully executed contract of service covering the engagement. • Competitive salaries for all team members paid weekly, • 401(k) Retirement Plan with company matching, • Employee Stock Purchase Program, • Paid Vacation, Sick Time, Volunteer Day, Holidays, Birthday, and Floating Holidays, • Paid Parental Leave, Adoption Assistance Program, • Medical, Dental and Vision Benefits, • Flexible and Dependent Care Spending Accounts, • Company paid Life insurance and Short-Term Disability, • Additional Life Insurance and Long-Term Disability also offered, • Mental, Physical and Emotional Well-Being Programs for Employees and Families, • Wellness Program and Safety Program with Bonuses for our Drivers, • Employee Referral Bonus Program

Welcome to Waste Resource Management (WRM) At Waste Resource Management (WRM), we go beyond operating trucks -we are dedicated to environmental protection and delivering exceptional service. With a presence across Texas, Colorado, Florida, and Nevada, our affiliated companies-SouthWaste Disposal LLC, Silver City Processing, and McDonald Farms, Inc.-offer comprehensive solutions for liquid waste recycling and transportation. Join a Company That Values You At WRM and affiliated companies, your work matters-for the environment, our clients, and your career. If you're ready to drive for a company that pays well, offers a competitive benefits package, operates safely, and supports your growth, we want to hear from you. Job Overview As a local vacuum truck driver and operator, you will be responsible for the safe, efficient, and legally compliant servicing of our customers. Your role will involve conducting pre-post trip inspections on your truck, following all safety rules and regulations, and loading/unloading liquid waste from customer locations to a wastewater treatment facility. You must be someone who enjoys an active job, is comfortable using equipment on the truck to load/unload liquid waste, enjoys working independently but also thrives in building strong relationships. If you have a CDL license with a good driving and safety record, and enjoy a challenge and the work/life balance that we provide, apply today. Why join WRM and affiliated companies? • Competitive Starting Pay: Minimum of $28.00 per hour, depending on previous vacuum and/or tanker driver experience and market, overtime pay after 40 hours, weekly pay. Annual performance review process and pay increases based on individual and company performance., • Comprehensive Benefits: Choose from one of three medical plans, based on your needs, dental, and vision coverage; along with 401(k) with 5% company match, • Career Growth: Training programs and advancement opportunities in wastewater operations and environmental services, • Paid Time Off: Generous PTO policy accrues from day 1, floating and company paid holidays., • Additional Perks: Company-paid life and disability insurance, employee assistance program, monthly cell phone stipend and more, • Safety-First Fleet: We operate operationally sound equipment designed to protect our professional drivers and loyal customers, • Supportive Leadership: Leadership that values safety, professionalism and growth What You'll Do, • Safely operate vacuum trucks and related equipment, • Collect and transport both liquid and solid waste, including industrial by-products and sewage, • Conduct daily inspections and perform routine maintenance on vehicles, • Ensure waste is disposed of properly and in compliance with all local, state, and federal regulations, • Maintain professional conduct working with customers, fellow peers and the motoring public, • Maintain accurate records of waste collected, maintain driver electronic logs, and necessary documentation as required, • Other duties as assigned, • *May require occasional overtime, weekends or holiday shifts as dictated by business needs What we're looking for, • Valid Class-A Driver's License (CDL) with Tanker Endorsement (preferably in state of operation), • High school diploma or GED and at least 1 year of Class A tanker driving experience, • Willingness and ability to work overnight shifts, • Clean driving record (no more than 2 moving violations in 3 years, 1 at-fault accident in 5 years), • Ability to pass a background check and drug screening, • Must physically qualify and obtain a Medical Examiners Certificate, • Physical capability to lift 50+ pounds, bend, squat, and work in various weather conditions, • Strong communication and customer service skills, • Vaccum truck experience is preferred Equal Opportunity Employer WRM is dedicated to fostering a diverse and inclusive workplace. We offer equal employment opportunities regardless of race, religion, gender, age, sexual orientation, veteran status, or disability.

Calpine, a business unit of Constellation Energy Corporation (Nasdaq: CEG), is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. With 79 energy facilities in operation, Calpine’s fleet has the capacity to generate approximately 27,000 MW of electricity – enough to power approximately 27 million homes. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Position located in the Fleet Solutions office in Pasadena, Texas. Job Summary (including but not limited to the following; other duties may be assigned) Engineers will work closely with all levels of the Power Operation Team to support plant maintenance, operations, conduct analysis through modeling, work on projects in the area of business risk assessment, and other various projects. Use computers and monitoring equipment to measure, record and make adjustments within operating parameters. Provide engineering services for troubleshooting, maintenance, design, and configuration management of existing power plants. Will be conducting analysis on the plant performance efficiency, and strategy updates, supporting model development to assist in evaluation of operational performance. Compiles and prepares reports. Conducts special financial and business-related studies which may include the development of ad hoc and custom reporting involving the determination of metrics and identifying and integrating data sources. Job Responsibilities • Makes decisions regarding own work within defined parameters., • Regularly contributes useful ideas for own work area., • Works on problems of limited scope., • Follows standard practices and procedures., • General instructions on routine work, detailed instructions on new assignments., • May coordinate efforts of others, • Basic communication – delivers information to individuals within defined parameters. Job Requirements • Bachelor’s Degree in engineering or equivalent, Mechanical Engineering preferred., • Minimum of 5+ years’ experience with a concentration on rotating equipment., • Developing use and/or application of basic principles, theories and concepts., • Previous experience working in team an environment using analytical skill set to provide recommendations around business challenges., • Previous experience evaluating performance using model-building techniques., • Previous work experience in an Internship or other entry level work experience is preferred., • Strong communication skills, verbal, written and presentation skills., • Proficiency in MS Office to include MS Excel, MS PowerPoint, etc. Salary Information Salary Range: $109,779.21 - $139,968.50 Additional Calpine Information: • Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities., • Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to hcrecruitment@calpine.com. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP _ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description Are you ready to dive into a rewarding career with Bluefrog Plumbing + Drain in Houston, TX? We're on the lookout for a talented full-time Licensed Plumber to join our dynamic team! Our Licensed Plumbers typically work Monday through Friday, allowing for a healthy work-life balance. Say goodbye to endless on-call hours! PAY & BENEFITS Picture this: competitive wages ranging from $25 to $45 per hour, plus bonuses and commissions, all while enjoying amazing benefits like: • Paid training, • Paid holidays, • Paid vacation, • Christmas parties, • Company dinners, • Team-building activities Additionally, we offer our Licensed Plumbers: • Medical, dental, and vision insurance, • A company-provided vehicle, • Gas card, • A uniform THE TYPE OF LICENSED PLUMBER WE'RE LOOKING FOR • 3+ years of plumbing experience, • Valid Plumbing License (tradesman, journeyman, or master), • Valid driver's license As a Licensed Plumber, you'll start your day by gearing up in your company-provided uniform and heading out to meet our valued residential and light commercial clients. Whether it's installing new fixtures, repairing pipes, or performing maintenance tasks, you'll use your expertise to ensure our customers' plumbing systems are in perfect working order. ABOUT BLUEFROG PLUMBING + DRAIN The ultimate priority at our company is to make sure the pipes in our customers' homes are working perfectly. We understand that piping issues can occur suddenly, which is why our knowledgeable team stays ready to leap into action at any time of the day. By staying dedicated to delivering the best service and ensuring a properly working system, we have maintained a reputation as West Houston's #1 plumbing company! PERKS OF BECOMING PART OF OUR FAMILY In order to provide such exemplary services, we first ensure the well-being of our team members. We have a comfortable family atmosphere where each person feels respected and heard within the organization. Additionally, we believe in a strong work-life balance to give our employees more time with their loved ones, so we limit on-call hours. With a great pay structure and incredible perks, our team is happy to come to work! Ready to take the plunge? Apply now using our initial 3-minute, mobile-friendly application. Join us and embark on an exciting journey filled with growth, success, and endless opportunities!

Job Description Are you driven to grow, lead, and make a meaningful impact? At Apex, we're building more than a consulting and engineering firm—we're creating a place where your career accelerates, your contributions matter, and your potential is fully realized. We believe your growth is our growth, which is why we invest in your development at every stage of your career. Here, you'll work on projects that shape communities, protect the environment, and create lasting impact, all while being empowered with the autonomy and flexibility to do your best work. Fueled by high quality delivery, exceptional client retention, and strategic acquisitions, Apex Companies continues to rank among the fastest-growing firms in the AEC industry, recently recognized by the Zweig Group for our industry-leading growth. Our success is grounded in strong leadership, a collaborative culture, and a shared commitment to delivering exceptional outcomes. As we continue to expand, we're looking for high-performing professionals who are ready to lead, collaborate, innovate, and create impact. At Apex, you help shape what's next. When we succeed together, we share in that success. All Apex positions are eligible for annual bonus opportunities, reinforcing our commitment to recognizing and rewarding meaningful contributions that drive our collective growth. Position: Landscape Technician (Stormwater) Location: Houston, TX Compensation: $19.00 - $21.00 per hour, depending on experience Schedule: Full Time, 40-55 hours per week (Monday-Friday, overtime opportunities) Regional Travel: Required, typically 10 days per month (lodging and $55 per diem on travel days) We're hiring a Landscape Technician (Stormwater) to support the maintenance of stormwater infrastructure on commercial properties. This role is ideal for individuals with experience in landscaping, lawn care, construction, or groundskeeping, and for those who enjoy working outdoors and take pride in hands-on work! Why you'll love being on the Apex team: • Multiple Ways to Earn: Enjoy weekly pay, per diem, overtime opportunities, and performance-based annual raises., • Comprehensive Benefits: Access subsidized medical, dental, and vision coverage, plus company-paid life insurance, optional disability plans, and a 401(k) with company match., • Time Off: Receive 15 days of paid time off each year, along with 9 paid company holidays., • Long-Term Career Opportunities: Build a lasting career with Apex, supported by tuition assistance and ongoing professional development., • Purpose-Driven Work: Make a real difference by helping protect and improve water quality in your local communities. What you'll be doing: • Routine landscape maintenance and light repairs of stormwater systems and infrastructure (retention ponds, detention basins, drainage ditches, stormwater grates, and other stormwater assets), • Perform mowing, weed-trimming, debris removal, ground maintenance and cleanup, light construction, and maintenance repairs for client properties., • Operate landscaping and light construction equipment., • Travel from the shop to client sites locally and regionally using the company truck. 10 days per month is typical (Monday-Friday). What we're looking for: • 1-2+ years of experience with manual labor, outdoor experience preferred., • Solid understanding of landscaping equipment and materials preferred., • Willingness to travel locally and regionally required. 10 days per month is typical (Monday-Friday)., • Due to DOT interstate transportation requirements, employees must meet the minimum requirement of 21 years of age., • Valid driver's license, safe driving record, and a reliable method of transportation required., • Candidates must pass a pre-employment background check, motor vehicle record check, and drug screening. We are a drug-free workplace., • Ability to perform various physical tasks (i.e., bending, kneeling, pushing, pulling, lifting, etc.) and work in a variety of weather conditions. Interested in joining the stormwater team? Visit our website (https://apexcos.com/careers/) to apply today! Apex Job Title: Commercial Stormwater Compliance Technician Req ID: 11759 Hourly Expected Pay Range$19—$21 USD We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact Talent@apexcos.com or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Job Description DELIVER SOLUTIONS THAT MATTER. MOST TECHNICIANS FIX WHAT'S BROKEN. You find what everyone else missed. DuraServ is looking for experienced technicians who diagnose with precision, install with pride, and own the outcome. Are You the One They Call When It Has to Be Done Right? Commercial dock and door systems are not optional infrastructure. When a loading dock goes down, a distribution center stops moving. When a high-speed door fails, a cold chain breaks. When the job has to be done right — the first time, on site, under pressure — that's when your experience matters most. At DuraServ, experienced technicians are the core of the operation. You'll work independently, own complex service calls and installations, and be trusted to make technical decisions in the field without someone standing over your shoulder. You're not just a wrench — you're the reason the customer's facility keeps running. If you've earned that level of trust somewhere else — and you're ready to bring it somewhere it will be recognized — let's talk. What You'll Own The Technical Work • Install, service, and maintain commercial dock and door equipment to manufacturer standards — rolling doors, sectional doors, dock levelers, and related systems, • Perform mechanical and electrical troubleshooting across a wide range of equipment types — you diagnose root causes, not symptoms, • Use hand tools, power tools, and welding equipment to fabricate brackets, mounts, and installation hardware as needed, • Read and interpret manuals, wiring diagrams, and technical documentation to guide diagnostics and repairs accurately The Ownership • Maintain a safe, clean job site and comply with all OSHA safety policies, PPE requirements, and fall protection standards — no shortcuts, no exceptions, • Document all service activity with precision — work performed, parts used, and recommendations for future maintenance, • Communicate clearly and professionally with customers, providing real-time job status updates and explaining additional service needs without overselling, • Support teammates on larger installations and remain flexible to changing schedules — you understand that the team wins or loses together Who You Are You don't guess. You diagnose. You don't patch. You fix. And when you're done, the system runs better than before you arrived. • A true problem-solver — you find root causes and deliver lasting solutions, not temporary fixes that bring a callback, • Technically fluent — hands-on knowledge of mechanical and electrical systems, and comfortable with welding, hydraulics, and fabrication, • Self-managed — you run your day, your tools, and your job site like a professional without waiting to be told, • Physically capable — regular fieldwork in varying outdoor conditions, frequent standing, bending, ladder use, and lifting up to 50 pounds, • Customer-facing confident — you communicate complex technical information clearly and represent DuraServ with professionalism on every call, • A competitor — you take pride in being the technician who handles the jobs others can't, and you don't leave a job site until it's right Education & Experience Required • Valid, current state-issued driver's license — field travel to customer sites is daily, • Ability to meet physical demands: regular fieldwork outdoors, frequent ladder use, and lifting up to 50 pounds regularly Preferred • High School Diploma or equivalent — trade school certificate or diploma accepted and valued, • Hands-on experience with welding, mechanical systems, hydraulics, or electrical work, • 3+ years of hands-on experience with commercial dock and door systems — including sectional doors, rolling steel doors, dock levelers, dock seals and shelters, and related equipment. This is the line that separates an experienced technician from an apprentice. What's in It for You • Competitive hourly pay commensurate with your experience and skill level, • Autonomy and trust — you're given the tools and the freedom to do your job the right way, • Full benefits package: medical, dental, vision, and 401K with company match, • Company-provided life insurance, short-term and long-term disability, • Premium tools, ongoing paid training, and manufacturer certifications, • A high-performance team environment — no slackers, no shortcuts, no one dragging down the standard you've built your career on, • Clear advancement track — technical excellence at DuraServ leads to leadership opportunities for those who want them A Note to the Right Technician. If you've been in a shop or on a crew where your skill was taken for granted — where the standard was "good enough" and the best technicians got the same treatment as the worst ones — this is a different environment. DuraServ's field technicians are the company's reputation on every job site. We hire people who take that seriously — and we back them up with the tools, training, and team they need to deliver. Deliver solutions that matter. That's not a slogan. It's the standard. APPLY NOW — Bring Your Experience. Own the Work. Hit Apply. Show us what you've worked on and what you're built for. About DuraServ DuraServ is a national leader in commercial dock and door solutions, operating across the U.S. and Canada since 2001. Our field technicians are not an afterthought — they are the standard by which DuraServ is measured in every market we serve. Equal Opportunity Employment DuraServ and its subsidiaries are Equal Opportunity/Affirmative Action employers. It is our policy not to discriminate against any Employee or Applicant. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, status as a protected veteran, among other things, or status as a qualified individual with disability. This policy of nondiscrimination in employment includes but is not limited to: recruitment, hiring, placement, promotion, transfer, employment advertising or solicitations, compensation, layoff or termination of employment. Accommodation DuraServ and its subsidiaries are committed to providing reasonable accommodation to people with disabilities throughout the job application and interview process, to the point of undue hardship. If you require an accommodation during the application or interview process, please email hr@duraservcorp.com. NOTICE TO EXTERNAL RECRUITING AGENCIES & SEARCH FIRMS DuraServ LLC and its affiliate businesses do not accept unsolicited resumes or candidate profiles from external recruiting/staffing agencies or search firms. Any resume or candidate information submitted to any DuraServ employee — without a fully executed, written search agreement in place with DuraServ's Talent Management team — will be deemed the property of DuraServ LLC. No placement fee will be owed or paid, now or in the future, regardless of whether the candidate is subsequently hired. Agencies seeking to be considered as an authorized vendor must have a current, countersigned agreement with DuraServ LLC prior to submitting any candidates. Agencies should not contact hiring managers, regional leadership, or any other DuraServ LLC employee directly. DuraServ — Building Careers That Move Commerce Forward

Job DescriptionCome join our team at Optimal! We know a few things about competing with giants and exceeding expectations.After years of working in the field, our founders decided to break from tradition and build the company they wanted to work for. They believed in starting a company rooted in trust, its team, and the idea that everyone matters and has a part in getting the job done right. Quickly building a reputation from the ground up and growing the company along with our list of clients, Optimal is now influencing the industry and the people we serve. We live by the values that make us who we are.And that is how we deliver the impossible for our clients and team members every day. The Insulators for Optimal Field Services are responsible for installing, maintaining, and removing insulation on piping, ductwork, mechanical systems, and equipment in support of construction and maintenance projects. The employee must be able to read blueprints and specifications to determine the type and amount of insulation required. Insulators will measure, cut, and apply insulation materials, ensuring proper fit and finish to maximize energy efficiency and meet safety and regulatory standards. ESSENTIAL DUTIES AND RESPONSIBILITIES:Measure and cut insulation materials to specified dimensions using hand tools or insulation knives.Read blueprints, job specifications, and instructions to determine insulation requirements.Select appropriate insulation types and materials (e.g., fiberglass, foam, mineral wool, calcium silicate) based on application needs.Fit, wrap, or attach insulation around or to structures, surfaces, or systems using staples, tape, wires, cement, or mastic.Apply vapor barriers or protective coatings to ensure durability and moisture resistance.Fabricate insulation covers, jackets, or pre-formed insulation for piping and equipment.Secure insulation with metal bands, wire, or adhesive to hold it in place.Install insulation on industrial piping, ductwork, boilers, tanks, and other mechanical systems.Inspect finished insulation work for proper installation and compliance with specifications.Remove and replace damaged or outdated insulation as part of maintenance work.Uses scaffolding, ladders, or lifts to reach high or confined areas. REQUIREMENTS FOR INSULATORS:Must have a valid driver’s license/Identification Card.Must be able to read and interpret blueprints and technical drawings.Ability to calculate measurements and use basic math.Minimum of 2 years of experience in installation or related trade.Must be able to pass a drug screen and physical.TWIC Card Stop relying on contractors who over promise, under deliver, and do not care about your success. Instead, experience the Optimal difference. Build your team with us and know you have experienced craftsmen who have your back and can deliver. Optimal Field Services is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Optimal Field Services is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request information regarding reasonable accommodation, contact your Human Resource Business Partner. Equal Opportunity Employer/Protected Veterans/Individuals with DisabilitiesThe contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c) Part of the CREST INDUSTRIES family of companies.

Job DescriptionJob Title: Electromechanical AssemblerJob Description This role focuses on assembling and building electromechanical equipment and transformers that support electrical power solutions across the power market. You will work hands-on with mechanical and basic electrical tasks, using a variety of tools and materials to help produce high-quality power equipment in a dynamic production environment. Responsibilities • Perform mechanical assembly tasks using a variety of hand and power tools in a production environment., • Stack metal components and build transformers according to specifications and quality standards., • Accurately measure materials and components using a tape measure to ensure proper fit and alignment., • Mount heavy components such as breakers, transformers, busway, and contactors safely and correctly., • Install sheet metal panels and doors, ensuring proper fit, alignment, and secure fastening., • Assist with punching, aligning, and bolting copper and aluminum busbar as part of the assembly process., • Work as a cooperative team player, collaborating with colleagues to solve problems and meet production goals., • Demonstrate initiative by identifying issues, suggesting improvements, and taking ownership of assigned tasks., • Learn and perform basic electrical tasks such as using crimp connectors, ferrule blocks, and terminal strips under guidance and training., • Learn and perform cable bundling, zip-tying, and clean wire routing along wireways to maintain organized and safe wiring., • Apply schematic reading skills, when available, to interpret electrical diagrams and support accurate assembly., • Use mechanical print reading skills, when available, to follow detailed mechanical drawings and instructions., • Follow all safety procedures, including proper use of required steel-toe footwear and adherence to facility rules., • Remain flexible and open to working in both non-climate-controlled and climate-controlled areas within the facility., • Support production demands by working assigned shifts and being open to extended hours, including possible 12-hour shifts.Essential Skills, • Ability to stand for up to 12-hour days in a production or warehouse environment., • Proficiency with hand tools for mechanical assembly tasks., • 1–3 years of experience in manufacturing, construction, or carpentry., • Ability to mount and handle heavy components such as breakers, transformers, busway, and contactors., • Capability to install sheet metal panels and doors with attention to fit and alignment., • Strong teamwork skills and the ability to work collaboratively in a diverse environment., • Problem-solving mindset with the initiative to take on tasks and learn new skills., • Comfort working in outdoor/non-climate-controlled and climate-controlled areas., • Ability to follow safety guidelines, including wearing steel-toe footwear and using company-provided tools.Additional Skills & Qualifications, • Experience with switchboard or low voltage power circuit breaker switchgear is a plus., • Ability to read and interpret electrical schematics is a strong plus., • Ability to read and interpret mechanical prints is a strong plus., • Trainability on electrical tasks such as using crimp connectors, ferrule blocks, and terminal strips., • Trainability on cable bundling, zip-tying, and clean wire routing along wireways., • Background in companies involved in electrical or industrial equipment manufacturing (such as large power or automation organizations) is beneficial.Why Work Here? You will join a company that invests in your development from day one, including a fully paid four-week training program in Troy, Michigan, with travel arrangements that allow you to return home on weekends if you choose. The organization promotes a supportive culture with monthly company-paid lunches and provides practical benefits such as an annual allowance for steel-toe footwear once you are hired directly, 48 hours of sick pay per year, and access to health benefits. The environment encourages learning, growth, and long-term stability, offering structured training and clear opportunities to expand your skills in electromechanical assembly. Work Environment You will work in a large warehouse setting that includes both non-climate-controlled and climate-controlled areas, with climate-controlled break rooms available. The environment is diverse and inclusive, and communication in Spanish is fully supported. The standard schedule is 7:00 a.m. to 3:30 p.m., with a typical workweek of 40–50 hours and the need to be open to the possibility of 12-hour shifts depending on production demands. Steel-toe footwear is required, and the company provides all necessary tools, so you should not bring your own. The work involves handling heavy components and moving between different areas of the facility, requiring comfort with a hands-on, industrial setting. Job Type & Location This is a Contract position based out of Houston, TX. Pay and Benefits The pay range for this position is $20.00 - $22.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Houston,TX. Application Deadline This position is anticipated to close on Aug 31, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. \nCompany Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.