Trabajos manufacturing engineering en LeedsCrear alertas

Multi Skilled Maintenance EngineerLocation: LeedsSalary: £39,275 + Overtime Available (OTE £42k+)Shifts: Rotating 3-Shift Pattern (2-Week Cycle)Mornings: 06:15 14:15Afternoons: 14:15 22:15Nights: 22:15 06:15About the RoleWe are seeking a Multi Skilled Maintenance Engineer with a balanced mechanical and electrical skillset (50/50) to join a busy and well-established manufacturing operation in Leeds. You will play a key role in maintaining production reliability by carrying out both planned and reactive maintenance across plant and equipment.This opportunity would suit a hands-on engineer comfortable fault finding across both disciplines within a fast-paced manufacturing or production environment.Key ResponsibilitiesCarry out planned preventative maintenance (PPM) and respond to breakdownsDiagnose and repair electrical and mechanical faults on production machineryLog maintenance activity accurately on the CMMS systemSupport continuous improvement initiatives (RCA, 5S, TPM, SMED)Ensure all work is completed in line with health & safety proceduresWork closely with production teams to minimise downtimeAssist with maintenance projects and improvement workSkills & Experience RequiredApprentice trained in Electrical or Mechanical EngineeringExperience within manufacturing or production environmentsBalanced mechanical and electrical fault-finding capabilityMechanical knowledge including bearings, belts, gearboxes, pneumatics, hydraulicsElectrical experience including motors, sensors, control systems or fault diagnosisExperience using CMMS systemsAbility to read engineering drawings and electrical schematicsIT literate (Word / Excel)Flexible to work rotating shiftsWhats on Offer£39,275 base salary + Overtime Available (OTE £42k+)Overtime available21 days holiday + bank holidaysPension schemeOngoing training and developmentLong-term stable opportunity within a growing businessThis is an excellent opportunity for a multi-skilled engineer looking for stability and development within a supportive maintenance team.Apply now to be consideredTPBN1_UKTJ

Estimator Building Services / M&E / BMS | Leeds Office | Full Time | £40,000£50,000 per annumOur client is a Leeds-based specialist in control panel design, manufacturing, and building management systems, with over 25 years of industry experience. They provide a complete end-to-end service, including system design, in-house panel manufacturing, engineering, installation, and ongoing maintenance across commercial, industrial, education, healthcare, and public sector projects.With a strong reputation for delivering high-quality bespoke control solutions, they work with a wide range of clients on technically interesting projects, from new-build developments through to complex refurbishment and upgrade works.Their projects typically include a 75/25 split of new works to rework, covering sectors such as schools, student accommodation, office developments, manufacturing facilities, and commercial buildings, with project values ranging from £10k to £500k.The RoleDue to continued growth, our client is looking for a technically capable Estimator with experience within M&E, MEP, building services, controls, or a related engineering environment.This is an excellent opportunity for someone who understands technical systems, enjoys analysing drawings and specifications, and has the ability to produce accurate quotations and tender submissions. The successful candidate will play an important role within the estimating function, working closely with the Business Development Director and engineering teams to support project delivery and business growth.The business is open to candidates from a range of technical backgrounds. While BMS experience would be advantageous, it is not essential. The key requirement is strong engineering knowledge, an understanding of technical drawings, and the ability to recognise and assess components, equipment, and systems within a building services environment.This could suit an experienced Estimator looking to develop further within a specialist engineering business, or a technically strong engineer with some commercial exposure who is ready to move into estimating.Over time, there is the opportunity for the successful candidate to take on increased responsibility and develop into a more senior estimating or management position as the function continues to grow.The business primarily works with Trend and Tridium BMS platforms, so experience with BMS controls, HVAC systems, building services, electrical controls, or automation would be highly advantageous. However, a strong technical understanding and willingness to learn are equally important.This role will predominantly be office-based at LS12, with some flexibility for occasional home working.Key ResponsibilitiesReview customer enquiries, specifications, drawings, and technical documentation to understand project requirements Prepare accurate quotations and tender submissions based on technical information and project requirements Interpret M&E, mechanical, electrical, controls, and building services drawings Assess equipment, materials, labour requirements, and subcontractor costs to support accurate pricing Liaise with suppliers and internal engineering teams to gather technical and commercial information Support technical discussions with customers and stakeholders throughout the tender process Work closely with the Business Development Director and engineering teams to ensure commercially and technically suitable solutions are provided Assist with sales handovers to the delivery team following successful project awards Maintain accurate records of quotations, costs, and tender information Support continuous improvement of estimating processes and internal procedures Develop knowledge of ISO9001 quality procedures and company standards Build knowledge of BMS systems, controls, and company-specific solutionsWhat Were Looking ForPrevious experience within estimating, M&E, MEP, mechanical building services, controls, BMS, HVAC, or a related engineering environment Strong technical understanding of engineering systems and how they operate Ability to interpret technical drawings, specifications, and project documentation Understanding of components and equipment used within building services, controls, or engineering environments Good analytical skills with strong attention to detail Ability to produce accurate quotations and assess technical requirements Confident communication skills with the ability to liaise with customers, suppliers, and internal teams Organised approach with the ability to manage multiple projects and deadlines A proactive attitude with the ability to develop knowledge and take on increased responsibilityPrevious estimating experience is preferred, but candidates from strong technical engineering backgrounds will also be considered.Ideal Backgrounds Could Include:Estimator within M&E, MEP, HVAC, building services, or controls BMS Engineer looking to move into a commercial estimating role M&E Design Engineer Building Services Engineer Electrical Engineer with controls or panel experience Controls Engineer Automation Engineer Process Engineer Technical Engineer within HVAC, industrial controls, or related sectors Applications Engineer with strong technical knowledgeWhats In It For You£40,000£50,000 salary depending on experience 25 days holiday + Bank Holidays (plus Christmas shutdown) Private medical cover Opportunity to develop into a senior estimating or management position Join a growing business at an exciting stage of expansion Work with technically challenging BMS and controls projects across multiple sectors Develop your career within a specialist engineering environment Exposure to projects ranging from £10k£500k Opportunity to play a key role in the continued growth of the estimating function Flexibility with occasional home working (non-contractual)Whats next? Its easy! Click APPLY now! We cant wait to hear from you!TPBN1_UKTJ

Electrical Engineer required a global Engineering & Manufacturing company, offering 75 years of experience as the supplier of choice to Oil and Gas, Rail, Mining and Energy industries. \n This organisation design and manufacture innovative technologies for Electrical infrastructures and are actively searching for an experience Electrical Engineer to join their 2,000 plus global workforce. \n The successfu... \n \n ZIPC1_UKTJ

A great opportunity has arisen for an Electrical Testing Engineer to join a leading manufacturing company within the power and electrical industry. \n Key Responsibilities \n\n • Perform in-house testing of electrical power equipment, marshalling enclosures, and control panels.\n, • Test LV cabinets and control devices.\n, • Complete protection modifications as required.\n, • Diagnose and resolve technical issues during testing and commissioning.\n, • Ensure compliance with Health & Safety and Risk Assessment policies.\n\n Beneficial Skills / Qualifications: \n\n • Working experience in electrical testing within an engineering environment.\n, • Proven experience in testing and commissioning electrical equipment.\n, • Electrical qualifications and knowledge of electrical regulations.\n, • Ability to interpret electrical schematic drawings.\n, • Strong understanding of Health & Safety practices.\n, • Excellent written and verbal communication skills.\n, • Collaborative approach to working with operations teams.\n, • Attention to detail and methodical work style.\n, • Flexibility to support other departments when needed.\n, • Experience in continuous improvement environments (desirable).\n\n Additional Details: \n\n • Competitive salary (negotiable).\n, • 25 days annual leave plus bank holidays.\n, • Company profit share scheme.\n, • Nine-day fortnight with two paid breaks.\n, • Healthcare cash plan and EAP scheme.\n, • Pension scheme.\n, • EV salary sacrifice scheme and charging facilities.\n\n

MV/HV Project Engineer£50k~ base + bonusPermanent positionYorkshireHybrid workingAs Technical Project Engineer, youll manage engineering design & project execution across low to medium-complexity MV projects.Youll produce & review engineering drawings, prepare manufacturing documentation, support FATs, manage project activity, monitor progress & ensure projects are delivered to budget, quality & schedule.Youll also work closely with project deployment teams, manufacturing teams & internal stakeholders to ensure smooth delivery from design through to final handover.What youll be doing:Managing medium-voltage equipment projects from design through to deliveryProducing & reviewing engineering drawings, BOMs & technical documentationSupporting Factory Acceptance Tests with clientsWorking with protection schemes, control circuits & MV electrical systemsCoordinating project activity across internal teamsMonitoring progress against budget, quality & scheduleIdentifying technical risks & supporting mitigation plansProviding technical support during design, manufacturing & testing phasesWhat were looking for:Electrical engineering backgroundExperience with medium voltage, switchgear, substations or electrical distributionAbility to read, produce or review engineering drawings & technical documentationUnderstanding of protection schemes, control circuits or MV systemsStrong project coordination or project delivery experienceComfortable dealing with clients & internal engineering teamsExperience with FAT, manufacturing documentation, BOMs or project execution would be highly beneficialTPBN1_UKTJ

A great opportunity has arisen for a welder / fabricator to join a leading manufacturing company who specialise in the power industry. \n Main Duties \n\n • To carry out all production operations in accordance with the company Health & Safety policy. Ensuring your personal safety and that of others working in your area;\n, • Fabricate and weld brackets, frame work and pipework using your own initiative and mostly without the convenience of a drawing;\n, • To read drawings and fabricate/weld parts associated with the drawing;\n, • Must be competent in the MMA (stick) and MIG welding processes;\n, • To use machinery associated with the manufacture of metal parts i.e. Guillotine, Brake press, Radial Arm Drill, hand tools, Oxygen/Acetylene cutting etc.;\n, • To ensure all work carried out is done to the highest standard;\n, • Ensure all quality control and customer specific documentation has been completed;\n, • Work to tight deadlines and show commitment to get the “job done”;\n, • Carry out any reasonable ad-hoc duties requested by your direct Line Manager or the Management Team;\n, • Safeguard all Company assets;\n, • Treat all other employees and all our customers professionally and with respect;\n, • Always act in the best interests of any of the company, and not to carry out (or fail to carry out) any action that would bring the company into disrepute;\n, • Always work in a responsible manner to ensure safe working practices;\n, • Follow Health Safety Quality and Environmental guidelines provided by the company – currently ISO 9001:14001 and OHSAS 18001 procedures, including all future notifications;\n, • Proactively contribute to the company’s policy of continuous improvement.\n\n Requirements to carry out the role \n\n • GCSEs High school or equivalent (Desirable);\n, • Apprentice trained in Fabrication/Welding;\n, • City & Guilds certification in fabrication/Welding;\n, • Experience of reading & understanding fabrication drawings;\n, • Overhead crane slinging & lifting (not essential as Training will be given);\n, • Any Health & Safety certification associated with the engineering industry (Desirable).\n\n Benefits \n\n • 25 days holiday per year plus bank holidays.\n, • Company pension scheme. 5% matched contributions.\n, • Life assurance scheme\n, • Mental Health/Counselling Sessions.\n, • Staff Discount Service.\n, • Start and finish times – flexible\n, • Cycle to work Scheme.\n, • Onsite Parking and EV charging\n, • Career development including additional academic/training courses.\n, • Working in fast growing industry.\n

Principal Recruitment ConsultantLeeds (LS1) - Hybrid / CommutableUp to £35,000 + £5,000 Car AllowanceUncapped Commission | Agile WorkingCapex Recruitment in Manufacturing - Build Your Desk in a Growing MarketAre you an experienced 360 Recruitment Consultant looking for greater earning potential, more autonomy, and the opportunity to develop a specialist desk within engineering and manufacturing?We're expanding our presence within Capex-led manufacturing projects - a sector driven by ongoing industrial investment across production upgrades, plant expansion and infrastructure development.This is a market with strong long-term demand for specialist talent, where project cycles and capital investment continue to generate consistent recruitment activity.We're looking for a recruiter who wants to take ownership of this space and build a long-term desk within a developing area of the business.Why This Opportunity?You'll be joining a growing team within Capex-led manufacturing projects, led by a highly experienced Manager with a strong track record of building successful recruitment teams across technical and engineering markets.Unlike fully established desks, this opportunity sits in a developing part of the business. That means you won't be inheriting a saturated market; you'll be helping shape and grow the desk as the sector evolves.From day one, you'll be building your own client relationships while operating within an environment that already understands how to win in engineering recruitment.You'll have the structure, support and leadership in place - but the opportunity to define your own market presence.A Market Built on Capital InvestmentCapex manufacturing projects sit at the centre of long-term industrial investment strategies, covering plant upgrades, production expansion and large-scale engineering programmes.This creates a recruitment environment driven by:Long-term project lifecyclesHigh-value technical hiringRepeat client demandOngoing capital investmentFor recruiters, this means fewer transactional placements and more sustained, relationship-led business with major manufacturing organisations.Leadership & EnvironmentYou'll report directly into a Manager with extensive experience in engineering and technical recruitment, known for building high-performing teams and developing consultants into strong billers.This is a performance-led environment with clear expectations and high standards, balanced by strong day-to-day support and guidance.The focus is on enabling consultants to operate independently while giving them the commercial backing to succeed.Platform & SupportAs part of an established engineering recruitment business, you'll have access to full central support functions including Finance, Compliance, Marketing, HR, Internal Recruitment, Health & Safety, Fleet and IT.You'll also benefit from investment in sourcing tools, CRM systems and recruitment technology designed to support delivery in specialist markets.This infrastructure allows you to focus on client development, candidate delivery and building a sustainable desk.What We're Looking ForWe're looking for an experienced 360 Recruitment Consultant with a background in engineering, technical or specialist markets.You'll be commercially driven, confident developing new business and comfortable working in a fast-paced, delivery-focused environment.Manufacturing or industrial recruitment experience is beneficial but not essential , the key requirement is the ability to build relationships and grow a desk within a specialist market.Ganymede is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientationTPBN1_UKTJ

Operational Technology (OT) EngineerThe OpportunityMy client is a highly successful and well-established manufacturing organisation with a strong reputation for quality, innovation and continuous improvement.They are currently seeking an experienced and proactive Operational Technology (OT) Engineer to join their IT function, supporting multiple manufacturing sites across West Yorkshire. Reporting to the Head of IT, the successful candidate will take responsibility for leading, managing and delivering Operational Technology projects across the business. This will include control systems, automation, instrumentation, SCADA, PLCs, industrial networks and industrial digitalisation.This is an excellent opportunity for an experienced OT, Automation or Control Engineer to take ownership of significant projects and play a key role in the development, reliability and resilience of the company's operational technology infrastructure.The RoleThe Operational Technology Engineer will be responsible for the full lifecycle delivery of OT projects, from initial concept through to implementation and ongoing support.Key responsibilities will include:\n\n • Developing project concepts, specifications and technical solutions.\n, • Designing and implementing automation, control and OT infrastructure.\n, • Managing procurement, contractors, installation and commissioning activities.\n, • Managing project budgets, timelines and resources.\n, • Providing technical leadership and governance across OT and process control systems.\n, • Working closely with IT, engineering, production, maintenance and other operational stakeholders.\n, • Supporting operational reliability, business continuity and asset performance.\n, • Ensuring OT systems meet relevant cyber security and compliance requirements.\n, • Supporting the integration, resilience and ongoing development of industrial control systems.\n, • Identifying opportunities for improvement, digitalisation and technological development.\n, • Troubleshooting complex automation, control and industrial networking issues.\n, • Driving change and delivering initiatives designed to improve operational performance.\n, • Providing technical support and guidance across the company's OT environment.\nThe PersonMy client is looking for an individual with a strong background in industrial automation, control engineering or Operational Technology who is comfortable working autonomously and taking ownership of projects from concept through to completion.The successful candidate will ideally have:\n\n, • A Degree, HNC, HND or equivalent qualification in Control Engineering, Electrical Engineering, Automation Engineering or a related discipline.\n, • Proven experience delivering industrial automation and/or Operational Technology projects.\n, • Advanced knowledge of PLC, HMI and SCADA systems.\n, • Strong knowledge of instrumentation principles, configuration and calibration.\n, • Experience with industrial communication protocols including:\n \n, • Profinet\n, • Profibus\n, • Ethernet/IP\n, • Modbus RTU & TCP\n, • OPC UA\n \n, • A strong understanding of industrial networks, control systems and OT infrastructure.\n, • Experience in commissioning, troubleshooting and maintaining industrial automation systems.\n, • An understanding of OT cyber security and system resilience.\n, • Excellent analytical and problem-solving skills.\n, • Strong organisational and project management abilities.\n, • Excellent written and verbal communication skills.\n, • Good IT literacy, including Microsoft Office packages.\n, • The ability to work effectively with both technical and non-technical stakeholders.\nThe successful candidate will be proactive, commercially aware and able to demonstrate a genuine can-do attitude. They will need to work with a high level of integrity and autonomy, whilst also building strong relationships across the wider business.What's on Offer?My client offers an excellent opportunity to join a successful and established organisation where the successful candidate will have the opportunity to make a genuine impact on technology, automation and operational performance.The benefits package includes:\n\n, • Competitive salary, dependent on experience.\n, • 35-hour working week.\n, • Permanent, full-time employment.\n, • Excellent career progression and professional development opportunities.\n, • The opportunity to develop new technical skills within a successful multi-site manufacturing environment.\n, • Company pension scheme.\n, • Death in service benefit.\n, • Extensive health and wellbeing support, including 24/7 support services and virtual GP access.\n, • Access to additional healthcare and wellbeing services.\n, • Generous annual leave entitlement.\n, • Free onsite parking.\n, • Convenient location with easy motorway access.\nDue to the operational nature of the position, there may be occasions where additional hours and flexibility are required to support critical projects, commissioning activities or operational requirements.This is a confidential recruitment campaign, and further information regarding the client and site location will be provided during the recruitment process.

We are looking for an experienced Materials Handler/ FLT Driver to join Operations team in an established family-owned business in Leeds (LS11). Our client is a leading manufacturer and supplier of electrical power distribution equipment and pioneers of super low loss amorphous transformer technology.The Role has a variety of responsibilities to keep you busy throughout the day:Your core duties will be loading and unloading of various types of distribution and power transformers utilising the overhead crane.Transporting and processing various materials across two sites using FLT and Company vanUsing general workshop machinery and hand tools related the roleQuality inspection of colleagues outputMaximise the uptime of operations by delivering materials in a timely mannerPerformance of area housekeeping activities, including the prompt reporting of problems shortages or equipment breakdownSkills, Knowledge & Experience:Hands on experience of working within a manufacturing environment is essentialCounter Balance FLT essential to 7 tonnesFull driving licence essentialOverhead crane/lifting slinging experience is desirableExperience of working within a mechanical/electrical engineering environment is desirable .The ability to understand mechanical and schematic drawings is desirableHave good written and verbal communication skillsExperience of working collaboratively with other operations personnelIdeally experience of working within a continuous improvement environmentCan do attitude with the ability to work unsupervised using own initiativeFlexible approach with hours and a willingness to work across other areas of the businessGood attention to detailSalary and benefits:Salary negotiable25 days holiday per year plus 8 bank holidaysCompany Profit Share Scheme (paid qtrly, currently running at 20% of annual salary)Two paid breaksNine-day fortnight (37.5 hrs) Every other Friday offSuperb canteen facility3 x salary death in serviceHealthcare scheme and wellbeing scheme4 weeks full pay paternity/maternity leavePensionEV Scheme and on site chargersParking on siteWorking Hours 37.5 (Nine Day Fortnight):Week 1 7.45 am and 4.45 pm Monday to Thursday (Friday off)Week 2 7.45 am to 4.45 pm Monday to Thursday and 7.45 am to 15.15 pm on FridayJob Types: Full-time, PermanentBenefits:Company pensionExperience:Manufacturing: 1 year (required)Licence/Certification:Driving Licence (required)Counter Balance FLT (required)Work Location: In personTPBN1_UKTJ

Plastic Fabricator (Progression to Supervisor) \n £30,000 - £35,000 + Mon - Fri + Days Based + Overtime Available + Training + Bonus \n Leeds, West Yorkshire Are you a Plastic Fabricator or similar looking to join a rapidly growing business that will enhance your career through specialist product training and a clear scope to progress into supervisory roles in the future? On offer is the opportunity to join a well-established plastics fabrication business that has been operating for over 40 years, building a strong reputation for quality, reliability, and bespoke manufacturing solutions. The company supplies a wide range of industries and is known for its consistent service and long-standing customer relationships. In this role, you will work from technical drawings to fabricate plastic components using a variety of workshop machinery and hand tools. You will be responsible for cutting sheet plastics to size, heat forming, solvent welding, assembling finished products, and carrying out quality checks to ensure all parts meet specification. You will also support general workshop duties and maintain a safe and efficient working environment. This role would suit a Plastic Fabricator or similar looking to progress their career within a rapidly growing business. The Role: \n\n • Fabrication of rigid plastic components including cutting, shaping, bonding, and finishing\n, • Working with materials such as acrylic, polycarbonate, PVC, and PETG\n, • Operating workshop equipment including saws, routers, CNC/laser cut parts, and heat forming tools\n, • Mon-Fri days-based role with overtime available\n\n The Person: \n\n • Experience in plastics fabrication or manufacturing\n, • Familiar with sheet plastics\n\n Plastic Fabricator, Plastics Fabrication, Acrylic, Polycarbonate, PVC, PETG, Plastic Welding, Solvent Bonding, Plastic Assembly, Workshop Operative, Manufacturing, CNC, Laser Cutting, Heat Forming, Engineering Drawings, Quality Control, Production Operative, Fabrication Technician, Leeds, West Yorkshire. \n Reference Number: BBBH26634 \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. \n The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. \n

Instrumentation & Controls Engineer \n Job Title: Instrumentation & Controls Engineer \n Location: Yeadon, Leeds \n Salary: Up to £40,000 \n Shift: Monday - Friday, Days \n Hours: 38 hours per week \n Sector: Manufacturing \n Job Role of the Instrumentation & Controls Engineer \n A fantastic opportunity has become available for an experienced Instrumentation & Controls Engineer to join a well-established manufacturing facility in Yeadon, Leeds. \n This is an excellent opportunity for an engineer looking to develop their career within a busy manufacturing environment, working on a range of instrumentation, control systems and measurement equipment. \n You will be responsible for the maintenance, calibration, fault-finding and optimisation of instrumentation and control systems, helping to ensure the reliability, accuracy and efficiency of the manufacturing process. \n The role will involve a mixture of planned maintenance, calibration, reactive fault-finding and continuous improvement, with the opportunity to contribute to wider Lean Manufacturing, TPM and operational excellence initiatives. \n Key Responsibilities \n\n • Carry out calibration, maintenance, inspection and repair of instrumentation and control systems.\n, • Complete planned preventative maintenance and scheduled calibration activities.\n, • Carry out reactive maintenance and fault-finding to minimise production downtime.\n, • Investigate recurring instrumentation and equipment failures and implement corrective actions.\n, • Maintain accurate calibration records, certificates and documentation.\n, • Assist with control system software modifications, configuration changes and commissioning.\n, • Interpret electrical schematics, technical drawings and instrumentation documentation.\n, • Maintain instrumentation manuals, drawings, configuration files, programme backups and certification.\n, • Identify opportunities to improve instrumentation reliability and process performance.\n, • Support Lean Manufacturing, TPM, 6S and continuous improvement initiatives.\n, • Ensure all maintenance and calibration activities are completed safely and in accordance with site procedures.\n\n Non-Negotiable Requirements \n\n • Experience working within Instrumentation, Controls, Electrical or Automation Engineering.\n, • Experience carrying out calibration and maintenance of instrumentation and measurement systems.\n, • Strong electrical and instrumentation fault-finding experience.\n, • Experience working within a manufacturing environment.\n, • Recognised engineering apprenticeship or technical qualification.\n, • Equivalent qualification in Instrumentation, Controls, Electrical, Automation Engineering or a related discipline.\n, • Ability to read and interpret electrical schematics and technical drawings.\n\n Desirable Requirements \n\n • Previous experience within a fast-paced manufacturing environment.\n, • Experience working with PLCs, control systems or process instrumentation.\n, • Knowledge of Lean Manufacturing, TPM or 6S.\n, • Experience supporting internal or external audits.\n, • Experience with calibration management systems.\n, • Strong understanding of continuous improvement and equipment reliability.\n\n The Instrumentation & Controls Engineer Will Benefit From: \n\n • Salary up to £40,000.\n, • Monday - Friday, days-based role.\n, • 38-hour working week.\n, • Working for a well-established manufacturing business.\n, • Excellent opportunity to develop your technical skills.\n, • Training and development opportunities.\n, • Opportunity to work with a range of instrumentation and control systems.\n, • A stable, long-term career within a growing manufacturing environment.\n\n If you are an experienced Instrumentation & Controls Engineer looking for a Monday-to-Friday days role in the Leeds/Yeadon area and feel you have the right skills and experience, then apply today. \n For further details, contact Kieran Wall at Pioneer Selection. \n As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. \n You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply - please see our website for further details.

Multi Skilled Maintenance Engineer\n BRAND NEW SITE - FULLY AUTOMATED \n Location: LeedsSalary: £49,200 + Overtime Shift: Days and Nights (Mon-Fri) Job Role\n A fantastic opportunity has arisen for a Maintenance Engineer (Electrical Bias) to join a market-leading FMCG manufacturing business in Northampton. This hands-on role offers long-term job security, structured training, and clear progression within a highly automated, modern facility. \n You will lead a skilled engineering team, maintaining and improving automated production machinery, ensuring maximum efficiency, reliability, and uptime across the site. Key Responsibilities\n\n • Support the engineering team in planned, reactive, and breakdown maintenance\n, • Electrical and PLC fault finding on automated machinery\n, • Respond to breakdowns and drive root cause analysis\n, • Ensure safe, efficient maintenance operations\n, • Drive continuous improvement and reliability initiatives\n, • Mentor and develop junior engineers\nNon-Negotiable Requirements\n\n, • Multi skilled with an Electrical Bias \n, • Strong PLC fault-finding experience\n, • Must come from an Automated Factory or Industrial Manufacturing Background \n, • Recognised engineering qualification (NVQ Level 3 or equivalent)\nAdditional Requirements\n\n, • Experience in manufacturing or industrial environments\n, • Proactive, hands-on approach\n, • Team player with leadership capability\nDesirable\n\n, • FMCG or automated manufacturing background\n, • Ex-Armed Forces engineers encouraged\nBenefits\n\n, • £49,000 salary with regular reviews\n, • Days and nights shift pattern\n, • State-of-the-art, fully automated facility\n, • OEM and specialist training opportunities\n, • Private healthcare and pension\n, • Clear progression into senior/management roles\nLocation\n Commutable from: Leeds, Bradford, Wakefield, Castleford \n For further details, contact Adem Halil at Pioneer Selection \n

JMB43– Multi-Skilled Shift EngineerLocation: LeedsSalary: £44,460 Per AnnumShift Pattern: 2 Days, 2 Nights, 4 OffJob Type: Full-Time, PermanentOverviewFirst Military Recruitment are currently seeking a Multi-Skilled Shift Engineer – Electrical Bias on behalf of our client.This is a hands-on engineering role within a busy manufacturing environment, responsible for maintaining plant, machinery and site equipment through planned and reactive maintenance.The successful candidate will ideally have a electrical engineering background, supported by good mechanical maintenance and fault-finding skills.The role operates on a 2 days, 2 nights, 4 days off shift pattern, meaning you will have approximately 182 days off per year – almost half the year. This makes the position particularly attractive for engineers looking for a strong work-life balance.Key Responsibilities \n\n • Carry out planned preventative and reactive maintenance.\n, • Diagnose and repair electrical and mechanical faults.\n, • Troubleshoot PLC-controlled equipment and automated systems.\n, • Maintain 3-phase motors, conveyors, boilers, bearings and associated plant.\n, • Respond to breakdowns and minimise production downtime.\n, • Complete inspections, maintenance records and documentation.\n, • Support production and continuous improvement activities.\n, • Follow all Health & Safety procedures and safe systems of work.\n\n Requirements \n\n • Electrical bias with mechanical maintenance skills.\n, • Electrical fault-finding and diagnostic ability.\n, • NVQ Level 3 or equivalent in Electrical/Engineering desirable.\n, • PLC and automated systems experience desirable.\n, • Manufacturing, FMCG or industrial experience desirable.\n, • Armed Forces engineering experience welcomed.\n\n Benefits \n\n • Approximately 182 days off per year\n, • Company pension\n, • Free life assurance\n, • 24/7 GP and Employee Assistance Programme\n, • Gym membership discounts\n, • Ongoing training and development\n, • Structured engineering grading programme\n, • Clear career progression\n, • Long service and recognition awards\n, • Free onsite parking\n\n If you're an Electrical Bias Multi-Skilled Engineer looking for a permanent position offering an excellent work-life balance, strong development opportunities and approximately half the year off, we'd love to hear from you.

As an Electrical Maintenance Engineer in Leeds, you will play a key role in ensuring the smooth running of machinery and equipment in an industrial and manufacturing setting. \n This is a hands-on role which involves maintaining, repairing, and improving production systems to keep operations efficient and reliable. \n Client Details \n This is an excellent opportunity to join a well-established manufacturer known for its commitment to quality, innovation and delivering solutions for leading brands across a range of consumer markets. \n Description \n Duties will include; \n\n • Carrying out planned and reactive maintenance on electrical systems and equipment.\n, • Diagnosing and repairing faults to minimise downtime and maintain production efficiency.\n, • Performing routine inspections to ensure all machinery and systems are in good working order.\n, • Working collaboratively with other engineers and departments to resolve technical issues.\n, • Supporting continuous improvement projects to enhance equipment performance.\n, • Ensuring all maintenance activities comply with health and safety regulations.\n, • Maintaining accurate records of maintenance work and equipment performance.\n, • Providing on-call support as required to address urgent issues.\n\n Profile \n The successful candidate will; \n\n • Be educated to a minimum NVQ level 3 (or equivalent) in an Electrical or Mechanical Engineering time served apprenticeship.\n, • Will have knowledge in electrical or mechanical maintenance, within a manufacturing industry.\n, • Have strong fault-finding and repair skills.\n, • Have working knowledge of PLC fault-finding and repair, any programming skills would be of great interest.\n, • Be familiar with working to planned and preventative maintenance schedules in a continuous improvement environment.\n, • Will have excellent interpersonal skills and be comfortable when dealing with colleagues at all levels across a range of functions within the business.\n, • Awareness of Health and Safety and other relevant legislation.\n, • Be able to read technical drawings - desirable\n, • 17th or 18th edition wiring regulations - desirable\n, • Have experience of modern manufacturing techniques such as 5S, LEAN and TPM would be ideal.\n\n · \n Job Offer \n Salary is up to £58,000 depending on your skills and experience (plus call out charges) \n 3 shift patterns on a weekly basis - 6am-2pm, 2pm-10pm - 10pm-6am Monday to Friday \n Free parking \n Pension scheme \n Annual leave - 34 days annual leave \n

Business Development Executive\n Location: Leeds (Office Based)Salary: £30,000-£40,000 + Performance Bonus + Benefits \n Our client is a leading provider of occupational health, occupational hygiene, and compliance services, helping organisations create safer, healthier workplaces across the UK. As they continue to grow, we're looking for a driven and commercially minded Business Development Executive to join their Leeds-based team. \n This is an excellent opportunity for someone who enjoys building relationships, identifying new opportunities, and making a tangible impact within a growing business operating in the occupational health and hygiene sector. The Role\n As a Business Development Executive, you will play a key role in driving new business across our portfolio of occupational health and occupational hygiene services. You'll identify prospective clients, develop strong relationships with decision-makers, and work closely with our technical teams to deliver tailored solutions that meet customer needs. \n You'll be responsible for generating new opportunities while nurturing long-term partnerships across industries including manufacturing, construction, engineering, logistics, utilities, and the public sector. Key Responsibilities\n\n • Identify and develop new business opportunities across the UK.\n, • Generate leads through proactive outbound activity, networking, referrals, and market research.\n, • Build and maintain relationships with key decision-makers including Health & Safety Managers, Operations Directors, and Procurement teams.\n, • Manage the full sales process from initial contact through to proposal and contract award.\n, • Collaborate with internal occupational health and occupational hygiene specialists to develop bespoke client solutions.\n, • Prepare quotations, proposals, and presentations.\n, • Maintain an active sales pipeline using CRM software.\n, • Meet and exceed agreed sales targets and KPIs.\n, • Represent the company at industry events, exhibitions, and networking opportunities.\n, • Stay informed on industry trends, legislation, and market developments affecting workplace health and compliance.\nAbout You\n We're looking for someone who is ambitious, self-motivated, and passionate about developing business in a consultative environment. \n You'll ideally have: \n\n • Experience in business development, sales, or account management within a B2B environment.\n, • Experience selling occupational health, occupational hygiene, health & safety, compliance, environmental, or technical services is highly desirable.\n, • A proven track record of winning new business and achieving sales targets.\n, • Excellent communication, negotiation, and relationship-building skills.\n, • Strong commercial awareness and the ability to identify customer needs.\n, • Confidence engaging with stakeholders at all levels.\n, • Good organisational and time management skills.\n, • A proactive, resilient, and results-focused approach.\n, • Full UK driving licence (desirable).\nWhat We Offer\n\n, • Salary of £30,000-£40,000 depending on experience.\n, • Performance-related bonus/commission.\n, • Career progression within a growing national business.\n, • Ongoing training and professional development.\n, • Supportive and collaborative working environment.\n, • Pension scheme.\n, • Holiday allowance plus bank holidays.\n, • Employee wellbeing initiatives.\nWhy Join?\n Our client is committed to helping businesses protect their people through expert occupational health and occupational hygiene services. Our growth is driven by quality, innovation, and long-term client relationships. You'll be joining a business where your ideas are valued, your success is recognised, and your career can develop alongside ours. \n Interested? \n To discuss this opportunity in confidence or to apply, please contact Amir Gharaati at Penguin Recruitment with a copy of your CV. \n Penguin Recruitment is acting as a Recruitment Agency in respect of this vacancy.

Why Greencore? \n Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. \n Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. \n \n Here at Leeds we make just over 40% of all UK frozen Yorkshire puddings; making us one of the UK's largest suppliers of frozen Yorkshire puddings to Asda, Morrisons & Tesco to name a few! \n \n We are looking for an Engineering Team Leader working 4 on 4 off days and nights \n \n What You'll Be Doing \n\n • Plan and prioritise the shift workload for the engineering team to enable production targets to be achieved by maximising machinery up time\n, • Execute the planned preventative maintenance schedule to maximise machinery up time and minimise disruption to production targets\n, • Ensure all plant and equipment adhere to all relevant legislation and so that a safe working environment is maintained all times\n, • Ensure the shift engineering team produces all documents and reports accurately and presents information in the required format to given time scales\n, • Ensure that the permit to work is in place and adhered to so that contractors and colleagues always work safely\n, • Lead the engineering team to create a high performing culture where team members are supported to achieve their potential\n, • Ensure the shift engineering team adhere to good manufacturing practices (Greencore Manufacturing Process) ensuring compliance with manufacturing unit food safety requirements\n\n \n What We're Looking For: \n We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. \n\n • People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification - electrically biased\n, • Demonstratable knowledge of manufacturing machinery and processes\n, • Has people management, leadership or supervisory experience and can lead a diverse workforce\n, • Has experience and skills managing costings and budgets\n, • Has experience working with computer programmes proficiently\n, • Experienced operating within a lean environment\n, • Yellow belt lean six sigma certified\n\n If this sounds like you join us, grow with Greencore and be a part of driving our future success. \n \n What You'll Get in Return \n\n • Competitive salary and job-related benefits\n, • Holidays\n, • Competitive matched pension contributions\n, • Life insurance up to 4x salary\n, • Company share save scheme\n, • Greencore Qualifications\n, • Exclusive Greencore employee discount platform\n, • Access to a full Wellbeing Centre platform\n, • Enhanced parental leave and menopause policies\n\n \n Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career. \n \n We reserve the right to close this advertisement before the stated closing date. \n \n Recruitment Fraud Warning: \n Greencore and its recruitment partners never charge candidates any fees at any stage of the hiring process. Any request for payment relating to a job opportunity should be considered fraudulent.

Elevation Recruitment Group are working with a well-established engineering business to recruit an Engineering Manager to lead and develop a multi-skilled workshop team. \n This is a hands-on technical leadership role, responsible for overseeing refurbishment and repair projects from initial assessment through to machining, fabrication, assembly and final testing. The successful candidate will combine strong mechanical engineering knowledge with the ability to coordinate people, resources and projects effectively. The Role\n Reporting into the wider engineering function, you will co-manage the workshop alongside the Workshop Manager, providing technical direction across a team of Machinists, Mechanical Fitters and Stores personnel. \n The workshop operates a broad range of heavy engineering equipment, including horizontal and vertical borers, CNC lathes, milling machines and balancing equipment. \n You will take ownership of incoming repair and refurbishment projects, assessing equipment, developing appropriate repair strategies and ensuring work is delivered safely, efficiently and to the required quality standards. Key Responsibilities\n\n • Co-manage the workshop operation, providing technical leadership across machining, fabrication, fitting and stores activities.\n, • Assess incoming repair and refurbishment projects and determine appropriate engineering solutions and repair strategies.\n, • Take ownership of projects from initial evaluation through fabrication, machining, assembly and testing.\n, • Produce detailed machining, fabrication and engineering drawings using CAD or equivalent software.\n, • Plan and coordinate workloads across machining, fabrication and fitting teams, ensuring effective use of people, machinery and resources.\n, • Monitor project costs, lead times and resource requirements to ensure work is delivered efficiently and commercially.\n, • Maintain high standards of Health & Safety across the workshop, ensuring compliance with company procedures and relevant legislation.\n, • Assist with the preparation of RAMS (Risk Assessments and Method Statements) where required.\n, • Drive continuous improvement across workshop processes, engineering standards, quality and operational efficiency.\n, • Liaise directly with customers where required to understand technical requirements and communicate proposed repair solutions.\n, • Provide technical support and guidance to workshop personnel, helping to develop engineering capability and best practice.\nAbout You\n The successful candidate will have a strong mechanical engineering background, ideally gained within a heavy engineering, refurbishment, repair or manufacturing environment. \n You will be comfortable assessing mechanical equipment, developing practical engineering solutions and working closely with machinists, fabricators and mechanical fitters to deliver projects from concept through to completion. You will ideally have:\n\n • Strong mechanical engineering experience within a workshop, heavy engineering, refurbishment or manufacturing environment.\n, • Experience with pumps, valves or similar mechanical equipment would be advantageous, although not essential.\n, • Good knowledge of machining, fabrication and mechanical assembly processes.\n, • Experience producing engineering and manufacturing drawings using CAD or similar technical drawing software.\n, • The ability to develop practical engineering solutions and see them through from initial concept to completion.\n, • Strong project planning and organisational skills, with an understanding of costs, lead times and resource management.\n, • A strong understanding of workshop Health & Safety requirements, with experience contributing to RAMS.\n, • Good written and verbal communication skills, including the ability to produce technical reports and communicate effectively with customers.\n, • Knowledge of corrosion mechanisms and protective coating systems would be beneficial, although training can be provided.\nWhy Apply?\n This is an excellent opportunity for an experienced mechanical engineer to take a leading role within a specialist workshop environment, combining technical engineering, project ownership and team leadership. \n You will have the opportunity to influence workshop performance, improve engineering processes and play a key role in delivering technically challenging refurbishment and repair projects.

Job Title: Quality Engineer \n Location: Pudsey, West Yorkshire \n Salary: Competitive, dependent on experience \n Job Type: Full-Time, Permanent \n About the Role: \n We are seeking a motivated and detail-oriented Quality Engineer to join our Quality team. This is an excellent opportunity for an experienced quality professional to play a key role in driving quality performance, continuous improvement, and customer satisfaction within a fast-paced manufacturing and engineering environment. \n As a Quality Engineer, you will work closely with production, engineering, and supply chain teams to ensure products and processes consistently meet customer, regulatory, and internal quality requirements. You will lead investigations into quality issues, implement corrective actions, and contribute to ongoing improvement initiatives across the business. \n Key Responsibilities: \n\n • Monitor and improve product and process quality throughout the manufacturing lifecycle.\n, • Lead root cause investigations using structured problem-solving techniques such as 8D.\n, • Manage customer complaints and non-conformance reports through to an effective resolution.\n, • Conduct internal process audits to ensure compliance with company standards and quality management systems.\n, • Support external audits from customers, certification bodies, and regulatory authorities.\n, • Analyse quality performance data and identify trends and improvement opportunities.\n, • Maintain quality documentation, procedures, and work instructions.\n, • Collaborate with production teams on process improvements and new product introductions.\n, • Promote a culture of continuous improvement and quality excellence throughout the organisation.\n\n Skills and Experience: \n Essential: \n\n • A Quality Engineer, Quality Specialist with experience, gained in a fast-paced manufacturing environment,\n, • Strong understanding of quality management systems, ideally ISO 9001.\n, • Experience with root cause analysis and corrective action methodologies.\n, • Ability to interpret engineering drawings, specifications, and technical documentation.\n, • Strong analytical and problem-solving skills.\n, • Proficient in Microsoft Office applications.\n\n Benefits: \n\n • Monthly time keeping and attendance bonus up to £100 (criteria to be met)\n, • Private health insurance after a 24-month qualifying period.\n, • Holiday entitlement 26 days plus bank holidays (Pro rata)\n, • 6 weeks Company sick pay after 2 years.\n, • Cycle to work scheme\n\n How to Apply: \n If you are a highly organised individual with a keen eye for detail and enjoy working in a manufacturing environment where quality is critical, we would love to hear from you. \n Please submit your CV and covering letter detailing your experience and suitability for the role. \n Candidates with the relevant experience or job titles of; Quality Analyst, QA Engineer, Test Engineer, Quality Supervisor, Quality Manager, Quality Assurance Specialist, Quality Coordinator, Quality Technician, QA Automation Engineer, may also be considered for this role.

We are looking for an experienced Project Manager to join great team in an established family-owned business in Leeds. Our client is a leading manufacturer and supplier of electrical power distribution equipment and pioneers of super low loss amorphous transformer technology.The Role:The role will be responsible for the timely delivery of energy infrastructure equipment and site service projects.Responsible for creating programme of works for site related contracts.Customer progress meetingsProactively managing end-to-end project/change implementation within defined timelines and budgets, covering all facets of implementation, ensuring that project objectives are achievedCustomer progress meetings, attend both on and off site or via Teams dependant on client requirementsReview and identify project risks and plan mitigations.Proactive management of the financial performance of the contract/project against target.Production of contract/project relevant documentation.Organise and plan sub-contractorsOrganise and plan warranty reworksMonitor status of major bought out equipment items and liaise with supply chain management for delivery to schedule.Review and approval of contract design drawings produced by Engineering department and issue to clientProactively monitor and drive manufacturing completion to achieve client satisfaction and maintain contract milestones, including factory acceptance testing, delivery and site services, where required.Act as primary point of contact and interface with the client via meetings, e-mail, telephone and site surveys when necessary. Represent the client requirements internally with Engineering, Production, Test, Contracts Administration, Procurement, Quality and Finance to co-ordinate smooth progress of the contract to completion.Management, preparation and planning of FAT (Factory Acceptance Test) procedures including attendancePreparation of RAMS and all site related documentationPrepare site material and review Site ReportsAttend all relevant meetings, including pre and post job site visit and auditsSupporting CPDs and Sales tenderingSkills, Knowledge & Experience:Minimum of 5 years experience in a similar roleMinimum of ONC in Electrical Engineering or similar to demonstrate technical knowledge is essentia l.Technical and/or practical knowledge specifically related to energy infrastructure including transformers and switchgear is desirableExperience in defining, managing and delivering equipment projects, programmes and portfolios to a varied client baseExpertise in multiple planning management and control disciplinesFully conversant with risk and opportunity management including associated methodologiesExperience working within the manufacturing/engineering sectors preferably transformers.Understanding of relevant HSE legislation for workplace and construction site working. Preferably experienced in Risk Assessment and Method Statement (RAMS) development and/or use.Experience of in the co-ordination of FATUnderstanding of the impact of current legislation such as CDM as it relates to product design. (Technical & Design support will be provided as necessary) Desirable .I.T. literate with the MS product suite and ideally experienced using Progress software.Strong communication/people skillsCurrent driving licence and access to a carSalary and benefits:Salary negotiable dependent on experience25 days holiday per year plus 8 bank holidaysCompany Profit Share SchemeHealthcare & Wellbeing schemeEmployee Benefit programmePensionEV salary sacrificeand EV on-site chargingParking on siteTPBN1_UKTJ

Plastic Fabricator (Plastics Manufacturing)£30,000 - £40,000 + Mon - Fri + Days Based + Overtime Available + Training + BonusLeeds, West Yorkshire Are you a Plastic Fabricator or Workshop Operative with experience working with rigid plastics such as acrylic, polycarbonate or PVC, looking to join a well-established manufacturing company offering a stable, days-based role with training, overtime and long-term progression? On offer is the opportunity to join a well-established plastics fabrication business that has been operating for over 40 years, building a strong reputation for quality, reliability, and bespoke manufacturing solutions. The company supplies a wide range of industries and is known for its consistent service and long-standing customer relationships. In this role, you will work from technical drawings to fabricate plastic components using a variety of workshop machinery and hand tools. You will be responsible for cutting sheet plastics to size, heat forming, solvent welding, assembling finished products, and carrying out quality checks to ensure all parts meet specification. You will also support general workshop duties and maintain a safe and efficient working environment. This role would suit a Plastic Fabricator, Workshop Operative or similar with experience in plastics manufacturing or fabrication, looking to develop their skills within a supportive and growing company.The Role: \n\n • Fabrication of rigid plastic components including cutting, shaping, bonding, and finishing\n, • Working with materials such as acrylic, polycarbonate, PVC, and PETG\n, • Operating workshop equipment including saws, routers, CNC/laser cut parts, and heat forming tools\n, • Solvent welding, assembly of plastic products, reading engineering drawings, and carrying out quality control checks in a Mon-Fri days-based role with overtime available\n\n The Person: \n\n • Experience in plastics fabrication or manufacturing\n, • Familiar with sheet plastics (acrylic, polycarbonate, PVC etc.)\n\n \n Plastic Fabricator, Plastics Fabrication, Acrylic, Polycarbonate, PVC, PETG, Plastic Welding, Solvent Bonding, Plastic Assembly, Workshop Operative, Manufacturing, CNC, Laser Cutting, Heat Forming, Engineering Drawings, Quality Control, Production Operative, Fabrication Technician, Leeds, West Yorkshire. \n Reference Number: BBBH26634 \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. \n The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Multi Skilled Maintenance Engineer BRAND NEW SITE - FULLY AUTOMATEDLocation: Leeds Salary: £49,200 + Overtime Shift: Days and Nights (Mon-Fri)Job Role A fantastic opportunity has arisen for a Maintenance Engineer (Electrical Bias) to join a market-leading FMCG manufacturing business in Northampton. This hands-on role offers long-term job security, structured training, and clear progression within a highly automated, modern facility.You will lead a skilled engineering team, maintaining and improving automated production machinery, ensuring maximum efficiency, reliability, and uptime across the site.Key Responsibilities Support the engineering team in planned, reactive, and breakdown maintenanceElectrical and PLC fault finding on automated machineryRespond to breakdowns and drive root cause analysisEnsure safe, efficient maintenance operationsDrive continuous improvement and reliability initiativesMentor and develop junior engineersNon-Negotiable Requirements Multi skilled with an Electrical BiasStrong PLC fault-finding experienceMust come from an Automated Factory or Industrial Manufacturing BackgroundRecognised engineering qualification (NVQ Level 3 or equivalent)Additional Requirements Experience in manufacturing or industrial environmentsProactive, hands-on approachTeam player with leadership capabilityDesirable FMCG or automated manufacturing backgroundEx-Armed Forces engineers encouragedBenefits £49,000 salary with regular reviewsDays and nights shift patternState-of-the-art, fully automated facilityOEM and specialist training opportunitiesPrivate healthcare and pensionClear progression into senior/management rolesLocation Commutable from: Leeds, Bradford, Wakefield, CastlefordFor further details, contact Adem Halil at Pioneer Selection 07458162400TPBN1_UKTJ

Multi-Skilled Maintenance Engineer (Electrical Bias) \n Salary: £55,000–£58,000 + Pension + Overtime + Benefits \n Shifts: 3-Shift Rotation (06:00–14:00 / 14:00–22:00 / 22:00–06:00), Monday–Friday \n Location: Leeds \n Reference: Jo7397/AD \n The Company \n A global leader in high-performance specialist plastic packaging, this organisation is renowned for innovation, product quality and long-term stability. Supplying major blue-chip manufacturers, they continue to invest heavily in engineering capability and are now looking to strengthen their maintenance team with an electrically biased multi-skilled engineer. \n This is a well-established, forward-thinking manufacturer offering long-term career security, modern automated equipment, and a professional engineering environment. \n Key Skills Required \n\n • Apprentice-trained Electrical Engineer\n, • Strong experience with PLC systems and automated machinery\n, • Solid understanding of PPM (Planned Preventative Maintenance)\n, • Knowledge of hydraulics and pneumatics\n\n The Role \n Reporting to the Maintenance Manager, you will carry out both reactive and planned maintenance across fully automated production lines. You’ll work within a fast-moving, high-volume environment, ensuring machinery uptime and supporting continuous improvement. \n You will be responsible for maintaining and fault-finding on: \n\n • Automated material-handling conveyor systems (palletisers, strappers, wrappers)\n, • Box converting lines including print, cutting, stacking and folding units\n, • PLC fault-finding and diagnostics\n, • Hydraulic and pneumatic systems\n\n This role suits a proactive engineer who enjoys problem-solving, working with modern automation, and being part of a strong, supportive team. \n How to Apply \n If you’re interested, please send your current CV using the contact details provided. Interviews will be held locally, and the company is keen to appoint as soon as possible. \n About ETS Consulting Ltd \n ETS Consulting Ltd are recruitment specialists in Manufacturing, Technical, Engineering and Sales sectors. ETS Consulting Limited acts as an employment business and agency. Registered in England & Wales (No. 06164846). Registered Office: 7 Stamford Square, Ashton-Under-Lyne, Lancashire, OL6 6QU.

Teacher of Design Technology (DT) – Secondary School\n Location: Leeds, West Yorkshire \n Start Date: September 2026 \n Contract Type: Full-time, Long-term (with potential for permanent placement) \n Salary: MPS/UPS (dependent on experience) \n Agency: Reed Education Design Technology Teacher Jobs in Leeds\n Are you a passionate and dedicated Design Technology Teacher looking for your next teaching opportunity? Are you searching for Design Technology Teacher jobs, DT Teacher vacancies, Design and Technology teaching roles, Product Design Teacher jobs, or Engineering Teacher positions in Leeds? \n Reed Education is delighted to be working with a successful secondary school in Leeds to recruit a talented Teacher of Design Technology (DT) for a full-time position starting in September 2026. \n This is an excellent opportunity for an enthusiastic DT specialist, Product Design Teacher, Resistant Materials Teacher, Engineering Teacher, Construction Teacher, Graphics Teacher, or Early Career Teacher (ECT) to join a supportive and forward-thinking Technology department. The Role\n As a Teacher of Design Technology, you will deliver engaging and practical lessons across Key Stages 3 and 4, with opportunities to teach Key Stage 5 Product Design, Engineering, or Construction depending on experience. \n Your responsibilities will include: \n\n • Planning and delivering high-quality Design Technology lessons in line with the National Curriculum.\n, • Teaching across a range of DT specialisms including Product Design, Resistant Materials, Engineering, Graphics, CAD/CAM, Manufacturing, Construction, and Workshop Technology.\n, • Developing students' creativity, innovation, problem-solving, and practical making skills.\n, • Preparing students for GCSE Design and Technology, GCSE Engineering, and vocational qualifications where applicable.\n, • Assessing, monitoring, and supporting student progress to ensure excellent outcomes.\n, • Maintaining high standards of health and safety within workshops and practical learning environments.\n, • Contributing to wider STEM initiatives, enrichment activities, and departmental development.\nThe Ideal Candidate\n We are looking for a Design Technology teacher who has: \n\n • Qualified Teacher Status (QTS) or equivalent recognised teaching qualification.\n, • A degree in Design Technology, Product Design, Engineering, Construction, Manufacturing, Industrial Design, or a related subject.\n, • Experience teaching Design Technology at secondary school level in the UK.\n, • Knowledge of one or more DT disciplines including Product Design, Resistant Materials, Engineering, Graphics, CAD/CAM, Food Technology, Construction, or Manufacturing.\n, • Strong classroom management and behaviour management skills.\n, • A commitment to safeguarding and promoting the welfare of children and young people.\n, • Experience teaching GCSE Design and Technology (desirable).\n, • Experience teaching A-Level Product Design, Engineering, Construction, or BTEC qualifications (advantageous).\nWhy Work with Reed Education?\n As one of the UK's leading education recruitment agencies, Reed Education offers: \n\n • Access to a wide network of secondary schools and academies.\n, • Dedicated support from an experienced education consultant.\n, • Competitive rates of pay paid weekly.\n, • CPD and professional development opportunities.\n, • 24/7 ongoing support throughout your placement.\n, • Free Enhanced DBS check (subject to terms).\n, • Refer-a-friend scheme with rewards of up to £250 in vouchers.\nApply Today\n If you're a qualified Design Technology Teacher, DT Teacher, Teacher of Design and Technology, Product Design Teacher, Engineering Teacher, Construction Teacher, Resistant Materials Teacher, Graphics Teacher, STEM Teacher, or an ECT Design Technology Teacher looking for your next role in Leeds, we'd love to hear from you. \n Apply now

Why Greencore? \n \n Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. \n Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. \n \n Here at Leeds, we make just over 40% of all UK frozen Yorkshire puddings; making us one of the UK's largest suppliers of frozen Yorkshire puddings to Asda, Morrisons & Tesco to name a few! \n \n What You'll Be Doing \n As Maintenance Engineer you will manage the the day to day maintenance tasks and site repairs to assist operations in achieving maximum productivity. \n\n • Complete fault finding, planned and preventative maintenance on plant and equipment to maximise equipment reliability and performance.\n, • Carry out fault finding, problem solving and establish route cause fixes to address equipment issues.\n, • Maintain ongoing communications with the operations team ensuring they are fully aware of all relevant engineering activities and schedules.\n, • Respond to internal customer needs to maximise production up time according to given priorities.\n, • Comply with food safety standards and controls to ensure all work is carried out correctly and safely.\n, • Record any stock removed from the Engineering stores to ensure accurate stock control.\n, • Complete all necessary documentation ensuring that it is kept accurate and is audit ready .\n, • Identify and recommend opportunities for improvements to promote Health and Safety and/or operational efficiency and effectiveness.\n\n \n What We're Looking For \n\n • Complete diagnosis of job maintenance.\n, • Prioritise own daily schedule and order of activities.\n, • Requesting Engineering parts via stores/Engineering Shift Manager.\n, • Refer to Engineering Shift Manager for specific work requests for significant process changes i.e. not like for like replacement to parts.\n, • Escalation to Shift Engineering Manager for performance driven issues as per local operating procedure.\n\n At Greencore we put our people at the core. We celebrate their differences and help everyone to be themselves at work. Together we make every day taste better. \n \n If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. \n \n What You'll Get in Return \n\n • Competitive salary and job-related benefits\n, • Holidays\n, • Competitive matched pension contributions\n, • Life insurance up to 4x salary\n, • Company share save scheme\n, • Greencore Qualifications\n, • Exclusive Greencore employee discount platform\n, • Access to a full Wellbeing Centre platform\n\n Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career. \n We reserve the right to close this advertisement before the stated closing date. \n \n \n Recruitment Fraud Warning: \n Greencore and its recruitment partners never charge candidates any fees at any stage of the hiring process. Any request for payment relating to a job opportunity should be considered fraudulent. \n

CNC Miller / Programmer\n Leeds£17.00 - £17.50 per hour | Up to £35,490 per annumDays | Permanent \n We are currently recruiting for an experienced CNC Miller / Programmer to join a well-established precision engineering and CNC machining business based in Leeds. \n Our client specialises in subcontract machining, prototype development and the manufacture of precision components for a variety of industrial and manufacturing applications. Due to continued growth, they are looking for an experienced CNC professional who can come in and hit the ground running. \n This is an excellent opportunity for a skilled CNC Miller who is confident programming using Siemens controls and has experience working with XYZ machines. The Role\n\n • CNC milling and programming\n, • Programming using Siemens controls/software\n, • Operating and programming XYZ machines\n, • Manufacturing precision components for machinery and equipment\n, • Producing components for a variety of subcontract engineering projects\n, • Working from engineering drawings and specifications\n, • Ensuring components are produced accurately and to the required standards\n, • Working independently and effectively within an established engineering team\nThe Candidate\n The successful candidate will ideally have: \n\n • Strong CNC milling experience\n, • CNC programming experience\n, • Siemens programming experience is essential\n, • Experience working with XYZ machines\n, • A time-served engineering background\n, • Experience within precision, subcontract or general engineering\n, • The ability to work independently and hit the ground running\n, • A strong understanding of precision component manufacturing\nSalary & Benefits\n\n, • £17.00 - £17.50 per hour\n, • Up to £35,490 per annum\n, • Permanent position\n, • Days-based role\n, • 20 days holiday plus bank holidays\n, • Overtime opportunities where available\n, • Opportunity to join a growing engineering business\n, • Training and progression opportunities\nWorking Hours\n Monday to Thursday: 7:30am - 4:30pmFriday: 7:00am - 12:00pm30-minute unpaid break Apply\n If you are an experienced CNC Miller / Programmer with Siemens programming experience and are looking for a permanent days-based opportunity in Leeds, please apply with an up-to-date CV.

Refrigeration Service Engineer\n Location: Field Based \n Salary: £40,000 – £42,000 + Overtime + £750 On-Call Allowance + Van \n Are you an experienced Refrigeration Engineer looking for a field-based role working on specialist industrial refrigeration equipment? \n We're recruiting for a growing engineering business looking to strengthen its Service team. You'll be working on portable cold stores, blast freezers and associated refrigeration systems across customers within food manufacturing, seafood, cold storage and pharmaceutical environments. \n This is a great opportunity for someone from an industrial or commercial refrigeration background, although experienced transport refrigeration engineers looking to move into industrial refrigeration will also be considered. The Role\n\n • Service, maintenance and PPM of refrigeration equipment\n, • Reactive breakdowns, diagnostics and fault finding\n, • Working on cold stores and blast freezing equipment\n, • Mechanical and electrical repairs\n, • Refrigerant recovery, charging and re-gassing\n, • Commissioning and decommissioning\n, • Remote monitoring and diagnostics\n, • Completing service reports and identifying follow-up works\n, • Providing technical support to customers\nWhat We're Looking For\n\n, • F-Gas qualification – essential\n, • Previous refrigeration engineering experience\n, • Industrial or commercial refrigeration experience preferred\n, • Experience with cold stores, blast freezers, chillers or food-production refrigeration would be advantageous\n, • Transport refrigeration backgrounds will also be considered\n, • Strong fault-finding and service skills\n, • Full UK driving licence\n, • Good work ethic and customer-facing skills\nWhat's On Offer?\n\n, • £40,000 – £42,000 basic salary\n, • Door to door\n, • Excellent overtime opportunities – typically 10–15 hours available per week\n, • Weekday overtime at time and a half\n, • Weekend overtime at double time\n, • £750 on-call standby payment\n, • On-call currently 1 in 4, with plans to move towards 1 in 6\n, • Company van and fuel card\n, • Laptop and mobile phone\n, • Hotel and trade cards\n, • 20 days' holiday + bank holidays\n, • 5% matched pension\n, • Private healthcare after six months\n, • 4x Death in Service\n, • PPE and specialist equipment provided\n, • \n\n Hours: Monday–Friday, 8am–5pm. Approximately 2–3 nights away per month may be required depending on workload. \n If you're an F-Gas qualified Refrigeration Engineer looking for a technically interesting role with excellent earning potential and the opportunity to join a growing service operation, apply now with your CV to find out more.

Our client is a well-established engineering and manufacturing business with a strong reputation for delivering high-quality machined, fabricated, and assembled products to customers across a variety of industrial sectors. Due to continued investment and growth, they are seeking an experienced Manufacturing Engineer to join their engineering team. This is an excellent opportunity for a motivated engineer to play a key role in driving process improvements, supporting production operations, and helping the business maintain its high standards of quality, efficiency, and customer satisfaction. Reporting to the Engineering Manager, the Manufacturing Engineer will be responsible for developing, improving, and supporting manufacturing processes across machining, welding, fabrication, and assembly operations. \n Manufacturing Engineer - Key Responsibilities - Production Engineer, CAD, BOM \n • Develop and maintain efficient manufacturing processes and production methods.• Create and update work instructions, process documentation, and manufacturing routings.• Support new product introduction activities, ensuring smooth transition into production.• Identify and implement continuous improvement initiatives to improve productivity, quality, and cost performance.• Investigate production issues and implement effective corrective actions.• Work closely with production teams to optimise workflows and manufacturing efficiency.• Support the design and implementation of tooling, fixtures, and manufacturing aids.• Conduct process capability studies and root cause investigations.• Liaise with quality, production, and design teams to ensure manufacturing requirements are achieved.• Assist with capacity planning and manufacturing improvement projects. \n Manufacturing Engineer - Candidate Requirements - Production Engineer, CAD, BOM \n • HNC/HND, Degree, or equivalent qualification in Manufacturing Engineering, Mechanical Engineering, or a related discipline.• Proven experience within a manufacturing engineering role.• Experience working in machining, fabrication, welding, or assembly environments.• Strong understanding of engineering drawings and manufacturing processes.• Knowledge of Lean Manufacturing and Continuous Improvement methodologies.• Excellent problem-solving and analytical skills.• Strong communication and stakeholder management abilities.• Ability to work effectively in a fast-paced engineering environment. \n What's on Offer \n • Competitive salary and benefits package.• Opportunity to join a financially stable and growing engineering business.• Investment in training and career development.• Varied and technically challenging work.• Supportive and collaborative working environment.• Long-term career progression opportunities. \n If this could appeal please do apply now!

Join Schneider Electric as a Factory Acceptance Test (FAT) Engineer, ensuring our low-voltage switchboards, motor control centres, and control systems are delivered right first time and fully compliant with customer specifications before dispatch. This is a critical role where you'll combine technical expertise, customer engagement, and digital testing processes to guarantee quality, safety, and customer satisfaction. Based within our manufacturing operations, you will be responsible for executing and witnessing FAT activities while driving continuous improvement in testing performance, documentation, and traceability.What will you do:Plan, coordinate, and execute Factory Acceptance Tests (FAT) for LV switchboards, motor control centres, and control systems.Verify products meet customer specifications, approved drawings, and applicable industry standards.Conduct functional, electrical, protection, and communication testing activities.Lead customer witness testing and provide technical support throughout FAT activities.Identify, troubleshoot, and resolve non-conformances, defects, and technical issues during testing.Produce and maintain accurate FAT records, reports, test documentation, and digital quality records using systems such as LDS and DISS, ensuring full traceability and compliance.Collaborate with engineering, production, quality, and project management teams to ensure timely project delivery.Support root cause analysis and corrective actions to improve product quality and manufacturing performance.Champion continuous improvement initiatives to reduce defects, improve test efficiency, and enhance customer satisfaction.Ensure compliance with all health, safety, electrical safety, and quality standards.Support customer audits, inspections, and site acceptance preparation activities where required.What will make you successful:Proven experience in FAT, commissioning, testing, or electrical engineering within a manufacturing or industrial environment.Strong understanding of LV switchgear, motor control centres, power distribution systems, and electrical control panels.Ability to interpret electrical schematics, wiring diagrams, GA drawings, and technical specifications.Strong fault-finding, analytical, and problem-solving skills.Experience performing electrical testing in accordance with relevant standards and customer requirements.Proficiency in digital manufacturing and quality systems, including experience with LDS, DISS, MES, ERP, or equivalent platforms for test recording, quality management, and product traceability.Strong attention to detail with a commitment to quality and Right-First-Time delivery.Excellent communication skills with the confidence to lead customer witness testing and engage with internal stakeholders.Proactive, structured, and results-oriented mindset.Understanding of IEC/BS EN 61439 and other relevant electrical standards would be advantageous.Degree, HNC/HND, Apprenticeship, or equivalent experience in Electrical Engineering or a related discipline.What's in it for you:Opportunity to work on complex and high-profile customer projects.Direct involvement in critical project milestones and customer witness testing.Exposure to advanced power distribution, motor control, and automation technologies.Development of specialist expertise in electrical testing, fault finding, quality assurance, and digital manufacturing systems.Collaborative environment focused on safety, quality, innovation, and continuous improvement.Career growth opportunities across engineering, quality, project delivery, and operational leadership functions.Bring your quality expertise to a team that's committed to excellence — apply today!At Schneider, we believe that every employee is a talent who deserves equal opportunities. This means you matter. Every individual needs to feel valued, supported, and treated fairly to do their best work.Our Total Rewards is our way of saying: “We see you. We value you”. It’s more than just pay and benefits- it’s a meaningful investment in you. It is designed for you to perform, grow, feel safe, and elevate your potential to shine as an impact maker.For this UK based position, the expected pay range is GBP 37,600 - GBP 56,400 per year. This pay range includes base pay and short-term incentives. The compensation range for this full-time position applies to candidates located within the United Kingdom. Our pay ranges are determined by the local market.Schneider Electric is there when it matters most to youOur Total Rewards package outlines all the benefits and support you’ll enjoy as part of the Schneider Electric team:Care for Yourself and Your Family. We ensure you feel secure with benefits that help you and your family thrive: health and life insurance, paid time off, parental and care leave, flexible work options, and confidential counseling for life’s challenges.Invest and Plan Your Future. We help you plan and invest for the future with competitive pay and programs: your base salary, short-term incentives or sales incentives, opportunities to own company shares, and retirement savings plans for your future.Grow Your Skills and Career. We commit to helping you grow with ongoing performance and development conversations, Senior Talent Program, global career opportunities, access to our Schneider Career Hub for new positions, projects, and mentors, and learning platforms like Coursera to equip you with the skills for today and tomorrow.Team Up in the Workplace. We encourage teaming up through project opportunities on the Schneider Career Hub, smart ways to collaborate, celebrating contributions via a recognition program, sharing your voice in our engagement survey, and fostering an inclusive, caring workplace.Support Your Community. We make a difference in your community with volunteer leave, programs through the Schneider Electric Foundation, and initiatives that support youth education.Looking to make an IMPACT with your career?When you are thinking about joining a new team, culture matters. At Schneider Electric, our values and behaviors are the foundation for creating a great culture to support business success. We believe that our IMPACT values – Inclusion, Mastery, Purpose, Action, Curiosity, Teamwork – starts with us.IMPACT is also your invitation to join Schneider Electric where you can contribute to turning sustainability ambition into actions, no matter what role you play. It is a call to connect your career with the ambition of achieving a more resilient, efficient, and sustainable world.We are looking for IMPACT Makers; exceptional people who turn sustainability ambitions into actions at the intersection of automation, electrification, and digitization. We celebrate IMPACT Makers and believe everyone has the potential to be one.Become an IMPACT Maker with Schneider Electric – apply today!€40 billion global revenue+9% organic growth150 000+ employees in 100+ countriesYou must submit an online application to be considered for any position with us. This position will be posted until filled.Schneider Electric aspires to be the most inclusive and caring company in the world, by providing equitable opportunities to everyone, everywhere, and ensuring all employees feel uniquely valued and safe to contribute their best. We mirror the diversity of the communities in which we operate, and ‘inclusion’ is one of our core values. We believe our differences make us stronger as a company and as individuals and we are committed to championing inclusivity in everything we do. At Schneider Electric, we uphold the highest standards of ethics and compliance, and we believe that trust is a foundational value. Our Trust Charter is our Code of Conduct and demonstrates our commitment to ethics, safety, sustainability, quality and cybersecurity, underpinning every aspect of our business and our willingness to behave and respond respectfully and in good faith to all our stakeholders. You can find out more about our Trust Charter hereSchneider Electric is an Equal Opportunity Employer. It is our policy to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct.

Services Director \n West Yorkshire \n £80,000 - £90,000 + Car Allowance + Pension + Holiday \n Confidential Executive Opportunity \n \n An ambitious, privately owned UK manufacturing and workplace solutions business is entering one of the most exciting periods in its history. \n \n Following significant investment in its operating model and leadership structure, the business is transforming from a traditional manufacturer into a fully integrated workplace solutions provider, combining manufacturing excellence with project delivery, installation, design and managed services. \n \n To support this journey, we are seeking an experienced Services Director to lead and transform a national service operation that sits at the heart of customer delivery. \n \n This is not a role for someone who simply manages KPIs. We're looking for an operational leader who enjoys being close to the business, building high-performing teams, improving commercial performance and creating scalable service operations that delight customers while delivering profitable growth. \n \n The Opportunity \n Reporting directly to the Board and forming part of the Senior Leadership Team, you'll take ownership of the complete service operation across: \n \n\n • National Installation\n, • Project Delivery\n, • Programme Management\n, • Design & Space Planning\n, • Logistics & Distribution\n, • Regional Service Hubs\n, • Service Engineering\n, • Subcontractor & Partner Network\n\n \n Leading a sizeable multi-disciplinary team, you'll ensure projects are delivered safely, commercially and to exceptional quality standards, whilst driving continuous operational improvement across every stage of the customer journey. \n \n This is a hands-on leadership position where approximately 70% of your focus will be tactical operational leadership and 30% strategic development, giving you the opportunity to shape both day-to-day performance and the long-term direction of the function. \n \n What You'll Be Responsible For \n You'll lead the operational engine that delivers hundreds of customer projects each year, with responsibility for: \n\n • Leading a national service operation encompassing project management, installation, logistics, distribution and design services.\n, • Driving operational excellence across planning, delivery and customer execution.\n, • Improving customer experience whilst reducing operational costs and increasing service profitability.\n, • Managing and developing a national network of installation partners and subcontractors.\n, • Leading Project Managers, Programme Managers, Distribution, Transport, Installation and Service teams.\n, • Creating scalable processes capable of supporting continued business growth.\n, • Ensuring projects are delivered safely, on time, in full and to exceptional quality standards.\n, • Embedding a culture of accountability, continuous improvement and commercial ownership.\n, • Supporting wider business transformation as part of the Senior Leadership Team.\n\n \n About You \n We're looking to speak with commercially focused operational leaders who have experience leading complex service delivery environments. \n \n Your background may include: \n\n • Commercial Furniture\n, • Workplace Solutions\n, • Interior Fit-Out\n, • Construction\n, • Manufacturing\n, • Engineering Services\n, • Building Products\n, • Facilities Management\n, • Distribution & Logistics\n\n \n You'll bring: \n\n • Proven senior operational leadership experience.\n, • Strong commercial and financial acumen with responsibility for budgets, profitability and service performance.\n, • Experience managing large, multi-disciplinary operational teams.\n, • Expertise in project delivery, installation or service operations.\n, • Experience managing subcontractors and third-party delivery partners.\n, • A customer-first mindset combined with exceptional organisational capability.\n, • A hands-on leadership style with the ability to influence at every level of the business.\n, • A passion for continuous improvement and operational excellence.\n\n \n Experience within the office furniture or workplace solutions sector would be advantageous, although candidates from comparable project-led operational environments are equally encouraged to apply. \n \n What Success Looks Like \n This role offers the opportunity to genuinely influence business performance by improving: \n\n • Customer satisfaction.\n, • On Time In Full (OTIF) delivery.\n, • Installation quality.\n, • Cost-to-serve.\n, • Planning accuracy.\n, • Project delivery performance.\n, • Service profitability.\n, • Operational efficiency.\n, • Team capability and leadership.\n\n \n The Package \n\n • £80,000 - £90,000 Basic Salary\n, • Car Allowance\n, • Performance Bonus\n, • Company Pension\n, • Generous Holiday Allowance\n, • West Yorkshire based\n, • Opportunity to join the Senior Leadership Team during a significant period of business transformation and growth.\n\n \n Interested? \n This is a confidential appointment being managed exclusively by Elevation Recruitment Group. \n For a confidential discussion or to express your interest, please contact: \n \n Carl

Leeds | Full Time | Primarily Onsite \n \n Ready to make a real impact in Regulatory Affairs? \n \n At Medasil Surgical Ltd, we manufacture and supply high-quality single-use medical devices used by healthcare professionals around the world. As our business continues to grow, we're looking for an experienced Senior Regulatory Affairs Specialist to help shape and maintain the regulatory compliance of our product portfolio. \n \n This isn't just another Regulatory Affairs role. You'll have the opportunity to influence projects from concept through to post-market surveillance, work alongside experienced Quality and Engineering professionals, and play a key role in ensuring our products continue to meet the highest regulatory standards. \n \n If you're passionate about compliance, enjoy solving complex regulatory challenges and want to work in a business where your expertise genuinely makes a difference, we'd love to hear from you. \n \n The Role \n As our Senior Regulatory Affairs Specialist, you'll be responsible for ensuring our medical devices remain compliant with UK and European regulatory requirements while supporting the ongoing development of our Quality Management System. \n \n You'll be involved in: \n\n • Creating, reviewing and maintaining Technical Documentation and Technical Files\n, • Ensuring compliance with MDR 2017/745, MDD 93/42/EEC, UKCA and other applicable regulations\n, • Conducting regulatory gap analyses and implementing improvements\n, • Reviewing design changes, CAPAs, engineering changes and non-conformances for regulatory impact\n, • Supporting product registrations with MHRA, EUDAMED and other Competent Authorities\n, • Integrating post-market surveillance activities into Technical Documentation\n, • Reviewing labelling, IFUs, promotional materials and product claims\n, • Monitoring changes in legislation and supporting updates across the business\n, • Participating in internal and external audits\n, • Working closely with Engineering, Production and Quality teams to ensure regulatory compliance throughout the product lifecycle\n\n \n Who We're Looking For \n We're looking for someone who enjoys taking ownership and thrives in a collaborative environment. \n You'll be the type of person who: \n\n • Enjoys interpreting regulations and turning them into practical business solutions.\n, • Has exceptional attention to detail and takes pride in producing accurate, audit-ready documentation.\n, • Is naturally organised and able to manage multiple priorities.\n, • Can confidently communicate with colleagues across Quality, Engineering and Manufacturing.\n, • Likes solving problems and identifying regulatory risks before they become issues.\n, • Wants to contribute ideas and continuously improve regulatory processes rather than simply maintaining them.\n\n \n What You'll Bring \n You'll ideally have: \n\n • A minimum of 5 years' Regulatory Affairs experience within the medical device industry.\n, • A degree in Science, Engineering, Regulatory Affairs or a related discipline.\n, • Excellent knowledge of:\n, • MDR (EU) 2017/745\n, • MDD 93/42/EEC\n, • UKCA Regulations\n, • ISO 13485\n, • Proven experience creating and maintaining Technical Documentation and Technical Files.\n, • Experience with regulatory gap analyses and interpreting harmonised standards.\n, • Knowledge of design controls, CAPA, post-market surveillance and risk management.\n, • Experience with MHRA and EUDAMED registrations.\n, • Excellent written and verbal communication skills.\n\n \n Why Join Medasil? \n We're proud of the products we manufacture and the people who make them possible. Joining Medasil means becoming part of a supportive team where quality, collaboration and continuous improvement are at the heart of everything we do. \n \n We offer: \n\n • Competitive salary based on experience\n, • A stable and growing UK medical device manufacturer\n, • A collaborative and supportive working environment\n, • Opportunities for professional development and career progression\n, • The chance to work on products that improve patient care around the world\n\n \n Interested? \n If you're an experienced Regulatory Affairs professional looking for a role where your knowledge will be valued and your work will have a genuine impact, we'd love to hear from you. \n \n Apply today and become part of Medasil Surgical Ltd.

Elevation Recruitment Group are pleased to be supporting a global manufacturer in their search for an experienced Production Supervisor to join a high performing company in Leeds, manufacturing products for regulated markets. \n \n You’ll be overseeing a team of 20-30 staff and effectively planning the production schedule to make sure everything runs like clockwork. \n \n This is a great opportunity to take ownership and be part of a busy, sales driven production team, focusing on productivity and efficiencies. \n \n Working Hours: Monday – Friday days with an early finish Friday \n \n Salary: £40,000 \n \n Key Responsibilities of the Production Supervisor include: \n\n • Leading and supervising a team in a busy, regulated environment\n, • Overseeing a number of industrial machinery processes, ensuring smooth operations and high-quality outputs\n, • Planning and scheduling production activities with a methodical and proactive mindset\n, • Monitoring equipment constraints, analysing data, and solving problems before they escalate\n, • Ensuring strict adherence to compliance and safety procedures\n, • Communicating effectively across departments to keep everything on track\n\n \n We're keen to speak with experience Production Supervisors with the below skills & experience: \n\n • Technical mindset - ideally from a regulated industry (e.g., automotive, aerospace, medical, heavy engineering)\n, • Proven experience in production leadership role\n, • Strong communication skills - you know how to manage up and keep everyone in the loop\n, • A methodical and proactive approach to planning and problem-solving\n, • Comfortable with data analysis and decision-making based on real-time information\n\n \n This role would suit candidates who have previously held roles such as Production Team Leader, Shift Manager, Production Supervisor. \n \n If you want to talk more about the role, get in touch with Emma Bartholomew at Elevation Recruitment Group directly.

Job Overview \n We are seeking an energetic and detail-oriented Senior Project Manager to lead complex projects across our operations. In this pivotal role, you will oversee project planning, execution, and delivery, ensuring objectives are met on time and within scope. Your expertise in project management tools and civil engineering software will drive efficiency and success across multiple initiatives. If you thrive in a fast-paced environment, excel at managing resources, and are passionate about making a tangible impact, this opportunity is for you! \n In detail -to take full ownership of planning, managing, and delivering complex engineering and CAPEX projects across our operations. This role demands a high level of autonomy, strategic decision-making, and leadership to drive successful project outcomes while fostering innovation and operational excellence. You will be accountable for end-to-end project execution, from concept to handover, ensuring adherence to timelines, budgets, and regulatory standards. \n The role requires frequent travel across the UK and internationally to support various project phases, including site assessments, installations, commissioning, and project closeout activities. \n Responsibilities \n\n • Lead the planning, coordination, and execution of large-scale projects from inception to completion\n, • Develop detailed project schedules using Prince 2 to track progress and deadlines\n, • Collaborate with cross-functional teams to define project scope, goals, and deliverables aligned with organizational objectives\n, • Manage project budgets, resources, and timelines effectively while mitigating risks\n, • Utilize Civil 3D software for infrastructure design support and technical assessments\n, • Monitor project performance through regular reporting and adjust plans proactively to stay on track\n, • Foster clear communication among stakeholders, team members, and clients to ensure alignment and transparency\n\n Qualifications/Experience \n\n • Degree in Mechanical, Electrical Engineering (or equivalent qualification)\n, • Proven experience delivering engineering projects in industrial settings such as power generation, manufacturing, heavy process industries or waste treatment facilities.\n, • Formal training or certification in project management methodologies (e.g., PRINCE2, PMP)\n, • Strong technical background in system installations, commissioning, and troubleshooting\n, • Excellent time management skills with the ability to prioritize multiple projects simultaneously\n, • Demonstrated leadership skills with the ability to motivate teams and manage stakeholder expectations\n, • Exceptional communication skills—both written and verbal—across diverse audiences\n, • Proven track record of managing contractors, coordinating multidisciplinary teams, and delivering projects on time and within budget.\n, • Experience in commissioning new systems and troubleshooting complex technical challenges.\n\n \n \n Join us to lead impactful projects that shape a safer and more sustainable future \n !

Interim Technical Director – MicroLub Ltd (Leeds) \n \n 12‑Month FTC • £65–£80k (depending on experience)• Daily On‑Site • Potential to Go Permanent \n \n MicroLub is a deep-tech ingredient solutions company spun out of the University of Leeds, pioneering next-generation, protein-based technologies for protein-boosted and reduced-fat foods. \n \n Backed by venture capital investors, we’re scaling fast—and we need an exceptional scientific leader to help turn our patented science into customer-ready ingredient solutions. \n \n We’re looking for an Interim Technical Director to join us, initially for 12 months but with the potential to become permanent, reporting directly to our Chief Technology Officer. \n \n This is not a role where you’ll simply oversee an established technical programme. You’ll be at the heart of our innovation engine: leading our team of research scientists, shaping technical strategy, and working directly with customers to solve real-world formulation and texture challenges. \n \n What you’ll lead \n \n\n • Our food and beverage product-development programme—from proof of concept through customer validation and scale-up\n, • A talented team of food and material scientists and product developers\n, • Customer-funded joint-development and material-transfer projects\n, • The translation of research and intellectual property into commercially valuable ingredient solutions\n, • Technical priorities, budgets, resources, timelines and risk management\n, • The establishment of a new research laboratory, including equipment, quality systems and safe ways of working\n, • Technical collaboration with customers, academic partners, and our commercial and manufacturing teams\n, • The identification and protection of new intellectual property, know-how, and trade secrets\n\n \n You’ll also act as a senior technical adviser to our CEO, contribute to Board updates and represent MicroLub at customer meetings, conferences, and industry events. \n \n What you’ll bring \n \n\n • A PhD in Food Science, Physical Chemistry, Biophysics, Soft Matter, Chemical Engineering or a closely related discipline\n, • Strong expertise in colloid science, food structure, soft materials, rheology, tribology or lubrication\n, • A proven track record of leading ingredient formulation or product innovation\n, • Experience translating research, intellectual property or emerging technology into commercial value\n, • Strong scientific leadership and experience developing researchers, scientists or product-development professionals\n, • Experience delivering collaborative projects with customers or industrial partners\n, • Commercial acumen and the confidence to contribute to business-development conversations\n, • Strong project, budget and resource-management skills\n, • The ability to communicate complex science clearly to scientific, commercial, customer, and investor audiences\n\n \n Experience in food ingredients, FMCG, food technology, consumer healthcare or personal care would be particularly valuable. Experience in a start-up, scale-up or university spinout would also be a strong advantage. \n \n Why MicroLub? \n \n This is an opportunity to: \n \n\n • Lead the development of genuinely differentiated patented technology\n, • Apply cutting-edge protein and colloid science to health and sustainability challenges\n, • Work directly with international food and ingredient businesses\n, • Influence technical and commercial strategy within a fast-moving spinout\n, • See breakthrough science move from the laboratory into real-world consumer products\n\n \n The role is based at Nexus, Discovery Way, Leeds, where you’ll work closely with our scientific, commercial and leadership teams. \n \n Your Future at MicroLub \n This is an initial 12‑month employed interim role, with potential to become permanent as MicroLub continues to scale its technology, team and customer base. \n \n Applicants must already have the right to work in the UK, as visa sponsorship is not available for this appointment, given the tight timescales we are working to. \n \n MicroLub is an equal-opportunity employer. We welcome applications from all suitably qualified candidates and are committed to creating a diverse, inclusive and supportive working environment. \n \n Applications close at 23:59 on 31 August 2026.

Elevation Procurement & Supply Chain are delighted to be partnered with an established industrial equipment manufacturing business, entering a sustained growth trajectory, with the sourcing & selection of a position of Head of Supply Chain \n \n Drive the supply chain strategy for a growing organisation where your decisions will directly impact service levels, cost efficiency, and customer satisfaction. This is a senior leadership role for an experienced Head of Supply Chain who can shape an end-to-end operation and embed best-in-class processes and systems across the business. \n \n About the Role: \n As Head of Supply Chain, you will take full ownership of the end-to-end supply chain, from demand planning and procurement through to logistics and distribution. You will set the strategic direction, optimise processes, and ensure the supply chain is aligned with business growth plans and customer requirements. Working closely with senior stakeholders, you will lead a high-performing team and drive continuous improvement across all supply chain functions. \n \n Key Responsibilities: \n • Own and lead the end-to-end supply chain strategy, ensuring alignment with overall business objectives and growth plans. \n • Oversee demand planning, inventory management, procurement, and logistics to ensure product availability, cost control, and service excellence. \n • Direct and optimise logistics and distribution operations, including transport, warehousing, and third-party providers, to improve performance and reduce risk. \n • Lead, manage, and develop the supply chain team, setting clear objectives, building capability, and driving accountability. \n • Implement, manage, and continuously improve ERP and supply chain systems to enhance visibility, data accuracy, and decision-making. \n • Collaborate cross-functionally with Operations, Finance, Sales, and Commercial teams to support new initiatives, product launches, and customer projects. \n • Analyse supply chain performance data, identify bottlenecks, and deliver structured improvement programmes to increase efficiency and reduce costs. \n • Establish and maintain robust governance, KPIs, and reporting frameworks to monitor performance and support informed strategic decisions. \n \n Key Requirements: \n • Proven experience in a senior supply chain leadership role with responsibility for end-to-end supply chain operations. \n • Strong track record of managing logistics and distribution networks, including warehousing and transport. \n • Demonstrable proficiency in ERP and supply chain systems, with the ability to drive process and system improvements. \n • Experience leading and developing multi-disciplinary supply chain teams in a fast-paced, complex environment. \n • Ability to manage cross-functional stakeholders and influence at senior level to drive alignment and delivery. \n • Strong strategic thinking and planning skills, with experience translating strategy into actionable plans. \n • Excellent analytical skills and commercial acumen, with the ability to interpret data and make informed decisions. \n • Clear, confident communication skills with the ability to present supply chain plans and performance to senior leadership. \n \n Desirable Skills: \n • Experience of designing or re-engineering supply chain networks to support business transformation or growth. \n • Background in working with third-party logistics providers and managing complex supplier relationships. \n • Exposure to continuous improvement methodologies (e.g. Lean, Six Sigma) within a supply chain context. \n • Experience in implementing or upgrading ERP and supply chain planning tools. \n • Sector-specific experience in manufacturing, distribution, or FMCG environments. \n \n Qualifications: \n • Degree-level education in Supply Chain Management, Logistics, Business, Operations, or a related discipline. \n • Professional supply chain or logistics qualification (e.g. CIPS, APICS, IoSCM) preferred. \n • Evidence of ongoing professional development in supply chain, operations, or leadership. \n \n If you are a strategic supply chain leader ready to take full ownership of a complex operation and drive meaningful change, we would like to hear from you.

About Facultatieve Technologies \n Facultatieve Technologies is a global leader in cremation and incineration systems, delivering environmentally responsible and technically advanced solutions to customers worldwide. \n \n Guided by our mission - Leading with Integrity, Innovating with Purpose, Prioritising Sustainability - we design, manufacture and service high-performance systems trusted in over 20 countries. With more than 140 years of engineering heritage and a strong commitment to safety, quality and continuous improvement, we are proud to set the standard in our industry. \n \n About the role \n We are seeking a Technical Support Engineer to join our team at Moor Road, Leeds. The role centres on providing technical support to customers and field engineers in the operation, diagnosis, fault-finding, and repair of the equipment supplied by the company. The role is responsible for ensuring the safe, reliable, and efficient operation of our equipment while delivering a high standard of customer service and technical support. \n \n What You’ll Be Doing \n\n • Take ownership of customer issues from initial report through to resolution, ensuring timely updates and effective communication throughout.\n, • Research, diagnose, troubleshoot, and identify effective solutions to resolve technical and system issues.\n, • Follow established procedures to escalate unresolved or complex issues to the appropriate internal teams.\n, • Accurately log, update, and maintain records of customer and employee queries using JITBIT and NetSuite.\n, • Work closely with field engineers to provide technical support and assist with the investigation and resolution of on-site issues.\n, • Ask targeted questions to quickly identify the root cause of customer issues.\n, • Provide remote technical support via telephone, email, or other communication channels, guiding customers through diagnostic and fault-finding procedures where appropriate.\n, • Prioritise and manage multiple technical support cases simultaneously, ensuring customer expectations and business priorities are met.\n, • Develop and maintain technical documentation, including procedures, manuals, technical notes, and knowledge base articles.\n, • Configure, program and test PCs for contract and spares department requirements, ensuring correct system setup and adherence to delivery schedules and deadlines.\n, • Work collaboratively with management and colleagues to identify, implement, and drive continuous improvement initiatives that enhance product reliability, customer satisfaction, and operational efficiency.\n, • Build and maintain effective working relationships with customers, engineers, suppliers, subcontractors, and internal departments.\n, • Liaise with suppliers and third parties during the investigation and resolution of technical issues.\n, • Ensure all work is carried out in accordance with company policies, safety procedures, quality standards, and relevant legislation.\n, • Support the continuous improvement of product reliability by identifying recurring issues and contributing to root cause analysis and corrective actions.\n, • Provide technical feedback to Engineering and Product Development teams to support product improvements, reliability and future design enhancements.\n\n \n What We’re Looking For \n Essential: \n\n • Electrical Engineering qualification to a minimum of NVQ Level 3 Advanced Apprenticeship (or equivalent).\n, • Proven experience working within a technical, electrical, or industrial manufacturing environment.\n, • Experience supporting PLC-controlled equipment and industrial control systems.\n, • Full, clean UK driving licence.\n\n \n Desirable \n\n • Mechanical engineering knowledge or experience.\n, • Experience working within the cremation, incineration, or thermal processing industry.\n, • Experience with gas and/or oil-fired burner systems.\n, • Familiarity with Mitsubishi PLCs (Q Series, FX Series) and GX Developer/GX Works software.\n, • Working knowledge of SCADA systems.\n, • Understanding of ISO 9001 Quality Management Systems and associated procedures.\n\n \n Working Pattern & Travel \n Full time, 37.5 hours per week (Shift work). \n Monday-Friday- 06:00-14:30, 08:30-17:00, 14:00-22:30 \n Saturday- 08:00-17:00 (when on rota) \n \n Salary: £34,000-£42,000 per annum. \n \n What We Offer \n\n • 24 days’ annual leave, increasing with length of service, plus bank holidays\n, • Festive December shutdown\n, • An additional paid day off for your birthday\n, • Competitive pension scheme with company contributions matched up to 5%\n, • Company sick pay\n, • Life assurance at 6x your annual salary\n, • Health Shield wellbeing support and health care cash plan.\n, • Employee Assistance Programme (EAP) offering confidential advice and support\n, • Bi-annual access to an independent pensions advisor\n, • Electric vehicle salary sacrifice scheme\n, • Cycle to Work scheme\n, • Free on-site parking\n, • Dress Down Fridays\n, • The opportunity to work for a business with a strong commitment to sustainability and environmentally responsible practices\n\n \n Inclusion & Diversity \n\n • Facultatieve Technologies is committed to building a diverse and inclusive workplace where everyone feels respected, supported and able to thrive. We welcome applications from people of all backgrounds and believe that diverse perspectives strengthen our teams and support our continued success.\n\n

An excellent opportunity for a Design / Development Engineer to join a well-established company! \n \n Job Type: Full-Time, Permanent. \n Salary: Competitive package dependent on experience, including Pension \n Location: Leeds LS13 \n \n About The Company: \n \n The company specialises in high performance, extreme environment piezoelectric devices, systems and materials, offering a range of sensors, actuators and transducer devices based on its novel piezoelectric materials, with applications in areas such as non-destructive testing/evaluation (NDT/E) condition monitoring and flow measurement in demanding environments. \n \n Piezoelectric materials are used in a vast and rapidly expanding range of actuators and sensors. They are the irreplaceable heart of systems such as medical ultrasound imaging, non-destructive testing (NDT), energy harvesting and SONAR comprising a $15bn annual market. Ionix has developed novel range of high temperature piezoelectric materials, which can operate in extreme environments in excess of 600 °C and with which opens the opportunity to a whole host of new high temperature and extreme environment sensing technologies. \n \n Purpose: \n \n They are looking for an innovative Design & Development Engineer who will be a key contributor to the Product Development team, responsible for creating and implementing new ultrasonic sensor solutions for extreme environments (high temperature, radiation, pressure etc.). \n The company spans materials science, mechanical and electrical engineering, physics and acoustics, and programming. As such, you will work closely colleagues of various disciplines to provide cutting edge solutions from pre-prototype stage through to full production. \n \n The role will be varied, mixing conventional CAD design, process R&D, prototyping, testing, materials science, and manufacturing engineering. Because of this, there is scope for a candidate who does not fit the traditional mechanical design engineer mould to contribute, and so applications from those who have other applicable skills to offer will be considered. \n \n You will serve as technical lead and project manager for projects of various complexities and lengths, as well as contribute collaboratively to the projects of others when required. As such, you should have an ability to work to deadlines, with a flexible approach to the varied tasks required of the role. \n \n Applicants must have the right to live and work in the UK. \n \n Responsibilities: \n \n\n • Design, prototype, assemble, and test sensors, by a range of acoustic, electrical, and mechanical means.\n, • Manage and contribute to projects to develop Ionix sensors & system products, including liaising with suppliers and stakeholders to ensure product or project requirements are met.\n, • Design and produce technical drawings of mechanical components and assemblies of devices using SolidWorks.\n, • Create thorough and accurate documentation where required for project management, experimental plans and records, quality, and intellectual property purposes.\n, • Present progress and feedback from development activities to technical and commercial colleagues.\n, • Provide technical advice and support the business development process, working with sales and technical colleagues to achieve the collective commercial goals of the business.\n\n \n The candidate: \n \n Essential skills and personal attributes: \n \n\n • A degree in Science or Engineering plus a minimum of 2 years industrial experience, or at least 4 years’ experience in research, product development, or mechanical design is strongly preferred.\n, • Demonstrable understanding and knowledge of CAD, preferably Solidworks, alongside knowledge of conventional manufacturing methods and techniques.\n, • A hands-on and analytical approach to development, capable of creating high quality documentation and reports and plans.\n, • Comfortable working cross functionally and developing into a subject matter expert.\n, • Confident producing and presenting technical specifications and presenting in formal design reviews and update meetings.\n\n \n Desirable skills and attributes (but not essential): \n \n\n • Experience with equipment design for deep subsea, extreme pressures, or extreme temperatures.\n, • Experience in processing of epoxy and polyurethane resins and composite materials.\n, • Experience in non-destructive testing (NDT/NDE), particularly ultrasonic testing would be beneficial.\n, • Experience in the design, modelling and construction of ultrasonic, piezoelectric or harsh environment sensors.\n, • Experience in design of components for use in explosive environments (ATEX).\n, • Experience of FEA analysis or simulation tools, particularly ultrasonics, ie., OnScale, COMSOL etc\n, • Experience with prototype manufacturing, including 3D printing, manual drilling & milling, and soldering.\n, • Experience of electronics, embedded software and/or digital signal processing.\n, • Experience working within an ISO 9001 accredited environment.\n, • Experience of working within an APQP framework\n\n \n Benefits: \n \n\n • Competitive salary, pension and performance bonuses.\n, • Comprehensive health and wellness benefits including Cycle to Work Scheme, Holiday Buy-back and increasing leave on years of service.\n, • Half day every first Friday of the month.\n, • Acccess to Electric Car Scheme\n, • Opportunities for professional development and career growth.\n\n \n If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. \n \n The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.

Company description:Water Utility Company based in Yorkshire region of England.Job description:Operational Liaison OfficerHello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water:We offer a competitive salary, 4b, £44,271 - £52,084 , depending on experienceA company car benefitAnnual incentive related bonus - £1000 maximum Bonus Opportunity for the Performance YearAttractive pension scheme ( up to 12% company contribution )Development opportunities in line with the Operational Liaison Officer progression plan25 days annual leave plus bank holidays plus two extra wellness days!Life assurance cover of 4 times pensionable salaryA great benefits package choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover.Retail savings schemeOnline GP service, cycle to work scheme, gym membership discounts and many more!Location: Leeds Valley Park, LS10, hybrid working with YW site visitsWork type: Permanent. 37 hours per week, Monday FridayWe have an exciting opportunity for an Operational Liaison Officer to join the Asset Delivery Team at Yorkshire Water and be a part of helping Yorkshire Water to provide the best service to our customers. Could this be you?What we do:Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, its so much more than this.We look after communities, protect the environment, and plan to look after Yorkshires water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the regions health, wellbeing, and prosperity.New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry.The Asset Delivery team are a key part of how we plan to meet the changing expectations of customers and regulators.Yorkshire Water is investing in £270m in one of its largest Bioresources programmes to meet theEAs Industrial Emissions Directive (IED) conditionsIncrease regional throughput of sludge treatment processesMaximise the generation of Biomethane to be used a renewable energy sourceThe Operational Liaison Officer will play a key role in these exciting AMP8 capital investment plans that will coordinate with Yorkshire Waters Operational and Maintenance colleagues on operational matters that will support with design development and smooth asset integration. These are critical roles for our AMP8 Storm Overflow Programme to ensure alignment across Yorkshire Waters operational business.This is an internal Yorkshire Water stakeholder-heavy role where your ability to influence, coordinate, and lead across boundaries is critical. With programmes ranging from £5 million to £100 million+, youll be working at a scale thats both challenging and career-defining.Where you fit in:As our Operational Liaison Officer , you will work with:Project Support & Data ManagementCollect, interpret, and validate data across project phases (design, commissioning, etc.) from various sources (SPP, YW systems, archives).Create and present reports to project teams.Support permit writing, handovers, and SAA sign-offs.Stakeholder EngagementConsult with operational, technical, and contract teams.Liaise across Yorkshire Storm Alliance and NESOP Yorkshire Water Bioresources Teams for coordination and collaboration.Design & Engineering InputProvide design input for operational and maintenance considerations.Attend key lifecycle meetings (ALM, HAZOP, Value Engineering, Technical Challenge, Core Engineering Review).Identify opportunities for value engineering and efficiencies.Construction & CommissioningAttend construction phase meetings (CPT, commissioning, risk, escalation).Support shutdowns and commissioning activities.Guide handovers and ensure smooth transition between teams.Process & Operational SupportAssist Project Manager and Sponsor throughout project lifecycle.Lead Process Impact Plans (PIPs) development and review.Respond to technical queries from internal/external departments.Training & CoachingCoach new starters on wastewater processes (e.g., site tours).Support project training and handover planning with Contract Partners and YW stakeholders.Asset & Programme ReadinessAssess asset health and plan mitigations.Contribute to programme readiness (staffing, CAPEX/OPEX, sludge logistics, chemical usage).Health & SafetyAudit sites, report hazards, and recommend solutions.Communication & CoordinationRaise awareness of timelines and impacts across Yorkshire Storm Alliance, NESOP, and Operations to prevent delays.What skills & qualifications you will need:Technical expertise in process operation with a minimum of 5 years experience in operation Bioresources and Waste Water Treatment processes.Experience of working with a team to deliver significant projects in short timeframes.Experience of supporting and embedding change, able to influence and drive the right culture and behaviours.Understanding of business targets and priorities and how the relevant asset groups contribute to this.Experience of the development of operations and maintenance plans, asset management plans, statistical process control and reliability plans, including use of tools such as FMECA and applied RCM, is desirable.Experience of understanding where the role fits within a business plan and then developing ways to deliver the outputs.Develops and maintains effective internal and external relationships.Experience of supporting and embedding change, able to influence and drive the right culture and behaviours.Clearly demonstrates the Yorkshire Water company values and behavioursYou will also benefit from having:Experience of driving sustainable performance against challenging business targets.Previous experience in a commercially orientated and / or regulated environment.Previous experience gained within the wastewater sectors or within the broader utilities, process or manufacturing industry sectors.We embrace a flexible working model, where our hybrid setup typically requires an average of 3 day in the office / on-site per week. This could be slightly more when collaborative efforts, training or meeting deadlines demand it. For those who prefer to work on-site, our office is open Monday-Friday during working hours.If youre experienced in Bioresources and Wastewater Treatment and want to help us deliver exceptional service for our customers whilst protecting the environment, then apply today to find out what a career with Yorkshire Water can offer for you.AccessibilityWe are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible.If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required.Just a heads-up! We might start interviewing and close the position based on the response. To make sure youre considered, please send inyour application as soon as you can.If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance.All our roles are subject to a medical questionnaire, and further medicals when required.No agencies pleaseTPBN1_UKTJ

Refrigeration / Chiller Engineer Pharmaceuticals Supply Chain Salary: £45,000k - £50,000k + Fully expensed vehicle with fuel card – On call allowance Type: Full time permanent Location: Leeds + UK travel to other sites Sector: Pharmaceuticals / Life science supply chain, NHS warehouse, logistics, cold storage & distribution This is an excellent opportunity to join a global pharmaceuticals organisation in a Site Refrigeration Engineer appointment. You will have responsibly for several large pharmaceutical’s site refrigeration systems / contracts ensuring all maintenance / servicing - KPI’s are achieved Key Areas: - Day to day site maintenance / servicing Carry out maintenance, calibration and repair of environmental ultra cold storage UK call out coverage Ultra-low temperatures F-Gas standards Experience of ISO 9001 Quality System environments The key responsibilities: - Maintenance of company refrigeration systems on manufacturing or storage sites in accordance with the procedures / SOP's / IOS 9001 Day to day site maintenance / servicing, calibration and repair of environmental cold storage systems Respond to and complete emergency repairs to the installed equipment. Ensure that the 'installed equipment' is operating within the defined limits and that all Planned Maintenance is completed in accordance with the schedules issued. Ensure that all Emergency Service work is completed in a timely manner maintaining the safe operation of the installed equipment. Complete all works in accordance with the Company Health and Safety Policy ensuring the safety of themselves and others in addition to highlighting any concerns which may not be covered by the documented system. Ensure that all appropriate tools and equipment are maintained in a usable and safe condition in accordance with Company policy and statutory legislation. Carry out of hours weekend and bank holiday emergency site visits on an on-call rota basis Person Specification: - Previous experience of working within a Cold supply chain logistics environment Experience with low-temperature refrigeration systems A recognised apprenticeship in electrical or mechanical engineering is essential, with proven experience in refrigeration and site services F-gas qualification is essential

Business Development Manager (Industrial Paints / Coatings)£45,000 - £50,000 (OTE £60k) + Uncapped Commission + Car / Car Allowance + Company Bonus + Training + ProgressionLeeds, North West Patch \n Are you an BDM/Sales Manager from industrial paints or coatings, looking to join a well-respected company, offering a highly autonomous and rewarding role, with a generous commission structure and plenty of career development? \n In this role you will be covering a North West patch, covering as high as Newcastle and as low as Derby. The role is split into 30% Account Management and 70% New Business, autonomously drumming up new business, selling paints and industrial coatings. \n Established over 100 years ago, this UK manufacturer produce high-performance industrial paints, powder coatings, and pretreatment solutions, supplying sectors such as manufacturing, defence, aerospace, automotive, and general industrial markets. \n This role would suit an Business Development Manager or similar from industrial paints and coatings, looking to take manage a successful area for a globally recognised manufacturer. \n The Role \n\n • 70% New Business and 30% Account Management\n, • Selling paints and industrial coatings\n, • Covering a North West patch, Derby up to Newcastle\n, • Remote with travel to customer sites 3/4 days a week\n, • Monday - Friday, 9am 5pm\n\n The Person \n\n • Business Development Manager or similar\n, • Industrial paints / coatings background\n\n Reference Number: BBBH25535 Area Sales, Manager, Technical, Manufacturing, Industrial, Paint, Coatings, Engineering, Technical, Production, Industrial Manufacturing, Chemical, Leeds, Manchester, York, Liverpool \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Electrical Bias Maintenance Engineer | £35.00 - £38.00p/h (outside IR35)Leeds Wakefield Bradford DoncasterAre you an experienced Electrical Bias Maintenance Engineer with a strong background in fast-paced manufacturing, looking for a stable, long-term opportunity? Do you enjoy varied, hands-on fault-finding one day and planned maintenance the next?My client is one of the UK's leading and longest-established equipment manufacturers, working with customers across the country to deliver innovative, cost-effective and reliable packaging solutions. Backed by an experienced team and award-winning processes, they have built a reputation for quality and reliability that sets them apart in the sector.Take Ownership of Day-to-Day Maintenance Across the SiteThis is a varied role covering the full spread of maintenance activity across the site's semi-automatic packaging lines - from reactive breakdown response and fault-finding through to planned preventative maintenance (PPM) and general site work. You'll be responding to issues raised by machine operators, prioritising rapid diagnosis and fix to minimise downtime, and using any quieter periods to get ahead on PPM. Reporting into the Engineering Manager, you'll be trusted to manage and prioritise your own workload day-to-day.Your responsibilities:Your day-to-day work will involve diagnosing and resolving electrical faults across a range of semi-automatic packaging machinery, including sensors, drives and pneumatic systems. You'll be working across a mixed fleet of PLCs on site, primarily Siemens and Mitsubishi - you don't need to be a specialist PLC programmer, but you should be comfortable navigating control systems, diagnosing faults and making minor edits or adjustments where needed. You'll also carry out pneumatic systems maintenance and fault-finding, including valves, actuators and air prep equipment, and will be working within an ATEX-classified solvent area, so an awareness of ATEX regulations and safe working practices in hazardous atmosphere zones would be an advantage, though not essential. You'll form part of a small, close-knit engineering team of three, working rotating shifts of 6-2, 2-10.What We're Looking ForTo be successful in this role, you'll need to be a time-served, electrically biased maintenance engineer (roughly 70% electrical / 30% mechanical) with proven experience in a manufacturing environment. You should be confident working independently, be comfortable reading engineering drawings, and bring a proactive, hands-on approach to fault-finding and continuous improvement.Why Apply?This is a genuine opportunity to join a long-standing, family-run manufacturer with a strong reputation and a stable, long-term outlook. You'll be joining a small, supportive engineering team, with real variety in your day-to-day work and the autonomy to manage your own priorities.Ganymede is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientationTPBN1_UKTJ

Shift Maintenance Engineer\n 4 on 4 off Days and Nights £58000 \n We're recruiting on behalf of a leading food manufacturer for an experienced Shift Maintenance Engineer to join a high-performing engineering team. This is a fantastic opportunity to work in a modern manufacturing environment where you'll play a key role in improving equipment reliability, reducing downtime, and driving continuous improvement. The Role\n\n • \n Carry out planned, preventative and reactive maintenance on process equipment. \n • \n Improve asset reliability and minimise downtime. \n • \n Use CMMS (SAP preferred) to record maintenance activities. \n • \n Support Root Cause Analysis (RCA) and continuous improvement projects. \n • \n Promote high standards of health & safety, including LOTO and Permit to Work procedures. \n • \n Provide engineering support for site improvement projects. \nAbout You\n\n • \n Level 3 Engineering Maintenance Apprenticeship \n • \n Previous maintenance engineering experience within manufacturing, FMCG or food production. \n • \n Strong fault-finding and problem-solving skills. \n • \n SAP PM and continuous improvement experience. \nWhat's on Offer?\n\n • \n Competitive salary. \n • \n 32 days holiday. \n • \n 6% matched Pension, life assurance and flexible benefits. \n • \n Ongoing training and genuine career progression. \n\n Interested? \n Apply today for a confidential discussion or get in touch with Logan Sly at to find out more about this opportunity and other engineering vacancies across West Yorkshire.INDSW

Role OverviewWould you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity?Otis is growing and is looking for an Escalator Repair engineer for one of our entities in the Northwest region. You will ensure the safety of passengers by safely maintaining a portfolio of lifts and escalator units.On a typical day you will:Carry out 100% of the elevator maintenance and service visits of the units within your territory.Work within your defined geographical area / territory, managing the portfolio of elevators within it.Respond proactively and quickly to fix any breakdowns, aiming to achieve first time fix.Carry out minor repairs to achieve continual operation.Liaise directly with the customer while on site to build a good working relationship.What's In it For Me;The opportunity to work on site with some of our key clients.Working with and on market leading tech.Highly competitive salary along with over time.What you will need to be successful.Hold an NVQ level 3 in Escalator service, maintenance, or repair.Hold a driver's license and within 1 hour commute of LiverpoolYou have at least 24 months of experience in the elevator sector.You have good skills in electricity and electrical engineeringYou are a committed professional, with safety as your priorityYou are comfortable communicating to othersYou are curious, adaptable, and you know how to work alone or in a teamYou are comfortable using electronic and digital tools.If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day.Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio.You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company.When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge.We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs.Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here .TPBN1_UKTJ

Valid Digi card & DCPC, LGV1, HGV1, C+E, LGV 1, HGV 1, CLASS 1 TRUCK DRIVERS WELCOME!Apply today to work as an HGV Class 1 Driver for our client's busy site in Leeds.The rate of pay is £15.80 - £18.50 per hour.This is a full-time role working nights on a 4-on-4-off shift pattern. Shifts to be confirmed.Your Time at WorkAs an HGV Class 1 Driver you will be responsible for shuttling pallets to a well-known client in Doncaster, x3 shuttles a night.Our Perfect WorkerOur perfect worker will have excellent communication skills and be able to understand and carry out necessary vehicle checks to ensure vehicle safety and be able to report defects correctly.Requirements:- Minimum 6 months of HGV Class 1 driving experience- Valid Digi card & DCPC- Maximum of 6 points on licence (no DR, DD, IN, or TT offences)- Night drivingKey Information and Benefits- Earn £15.80 - £18.50 per hour- 4 on 4 off- PPE provided- Full training provided- Temp-to-perm opportunity- Free car parking on site- Opportunities for overtimeJob Ref: D1ESLPSAbout StafflineStaffline is the UK's largest recruitment solutions partner, enabling over 35,000 people into good work every week. We operate at more than 420 customer sites across England, Scotland and Wales.As one of the most established recruitment agencies in Nottingham with operations across the UK, we specialise in connecting businesses with temporary and permanent jobs across warehouse & logistics, food and drink, aviation, driving, technical & engineering, manufacturing & automotive and security.Important Information- Staffline and its subsidiaries do not charge any recruitment or job-seeking fees at any stage of the hiring process.- This job advert may not be copied, imitated, or used, in whole or in part, by third-party websites, without prior written consent from Staffline.- Our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change.TPBN1_UKTJ

Mace is seeking an experienced Automation Engineer to support the delivery of a major sterile manufacturing and facility expansion programme within a highly regulated GMP environment. You’ll need to have:Degree qualified in Automation, Control Systems, Electrical Engineering or a related discipl

Job ID: 42520Location: Leeds, West Yorkshire, United KingdomCapabilities: Planning and ConsultingOffice Setup: HybridCompany: JacobsAt Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good. Your impact As a trusted advisor and sustainability leader, you will:Lead the development and delivery of sustainability strategies across major infrastructure programmes and projects.Inspire and manage multidisciplinary teams of sustainability and environmental professionals.Advise senior client and project leadership teams on sustainability risks, opportunities and best practice.Embed sustainability principles into design, governance, procurement and delivery activities.Provide technical leadership, quality assurance and expert guidance across complex projects.Develop innovative, practical solutions to sustainability challenges.Facilitate workshops, stakeholder engagement sessions and high-profile client presentations.Monitor and communicate sustainability performance against programme objectives.Mentor and develop the next generation of sustainability professionals.Support business growth through key client relationships, strategic pursuits and winning work. We're looking for an exceptional sustainability leader to join our team in Leeds and help embed sustainability at the heart of major infrastructure programmes. Whether appointed at Principal Consultant or Associate Director level, you'll play a pivotal role in influencing strategic decisions, shaping sustainability outcomes and driving innovation across some of the UK's most significant transport, cities, water and energy projects. This is an opportunity to work with leading clients and project teams, ensuring ambitious sustainability goals are translated into practical, measurable outcomes that deliver real environmental, social and economic value. Why Join Jacobs?At Jacobs, sustainability isn't an add-on—it's central to everything we do. You'll join a collaborative network of industry experts, work on nationally significant infrastructure programmes and have the opportunity to influence projects from concept through to delivery. We're committed to creating an inclusive environment where everyone can thrive. Even if you don't meet every requirement, we'd still love to hear from you if you're excited about the opportunity and believe you can make a meaningful impact. Here's what you'll need You'll bring a combination of technical excellence, strategic thinking and strong leadership skills, alongside:A degree in Sustainability, Environmental Management, Environmental Science, Geography or a related discipline.Chartered Environmentalist (CEnv) status or equivalent professional accreditation.Significant experience leading sustainability programmes on major infrastructure projects, ideally within the rail sector.A proven track record of integrating sustainability into programme and project delivery.Knowledge of sustainability frameworks and certification schemes such as BREEAM Infrastructure.The ability to influence senior stakeholders and provide trusted strategic advice.Strong leadership, communication and stakeholder engagement skills.Experience working within multidisciplinary engineering, design and construction environments.Excellent report writing, presentation and workshop facilitation abilities.Commercial awareness and experience supporting business development, bids and client growth initiatives. Ready to Make a Difference?If you're passionate about delivering sustainable outcomes, influencing major infrastructure investments and helping clients create a better future, we'd love to hear from you.Join Jacobs and help shape a more connected, resilient and sustainable world ð#LI-MF3 Joining Jacobs not only connects you locally but globally. Our values stand on a foundation of safety, integrity, inclusion and belonging. We put people at the heart of our business, and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees.With safety and flexibility always top of mind, we’ve gone beyond traditional ways of working so you have the support, means and space to maximize your potential. You’ll uncover flexible working arrangements, benefits, and opportunities, from well-being benefits to our global giving and volunteering program, to exploring new and inventive ways to help our clients make the world a better place. No matter what drives you, you’ll discover how you can cultivate, nurture, and achieve your goals – all at a single global company. Find out more about life at Jacobs.We aim to embed inclusion and belonging in everything we do. We know that if we are inclusive, we’re more connected and creative. We accept people for who they are, and we champion the richness of different perspectives, lived experiences and backgrounds in the workplace, as a source of learning and innovation. We are committed to building vibrant communities within Jacobs, including through our Jacobs Employee Networks, Communities of Practice and our Find Your Community initiatives, allowing every employee to find connection, purpose, and belonging. Find out more about our Jacobs Employee Networks here.Jacobs partners with VERCIDA to help us attract and retain talent from a wide range of backgrounds. For greater online accessibility please visit to view and access our roles.As a disability confident employer, we will interview disabled candidates who best meet the criteria. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role.We value collaboration and believe that in-person interactions are crucial for both our culture and client delivery. We empower employees with our hybrid working policy, allowing them to split their work week between Jacobs offices/projects and remote locations enabling them to deliver their best work.Your application experience is important to us, and we’re keen to adapt to make every interaction even better. If you require further support or reasonable adjustments with regards to the recruitment process (for example, you require the application form in a different format), please contact the team via Careers Support. Locations CityStateCountryLeedsWest YorkshireUnited KingdomYorkNorth YorkshireUnited KingdomSheffieldAll GB RegionsUnited KingdomLeedsWest YorkshireUnited Kingdom

Project Controls - Senior PlannerSector - UK InfrastructureLocation - Leeds, England PermanentFull time with flexible core hoursAbout this opportunity:Gleeds is a leading global property and construction consultancy. Independent since 1875, we are proud to deliver award-winning projects around the world. We are an accredited Great Place to Work, with our people at the heart of everything we do.Gleeds Infrastructure specialise in delivering projects worldwide with extensive experience in the Rail, Water & Utilities, Aviation, and Transportation & Highway sectors. Our goal is to deliver Infrastructure that leaves a positive, lasting legacy when well-integrated into the physical, human, and economic environment. Whether it’s a rail link, wind farm, or flood defence barrier, the goal is to create tangible benefits for individuals, communities, and economies.The Infrastructure team is a people focused team with the drive to be:Great place to work - attracting and developing the best talent, that represents the diverse society we work within.Investing in and supporting our people in their chosen careers and providing opportunities.As well as this you will support the growth of our Project Controls function both internally and externally applying best practice principles into all schedule management activities, including efficient methodology planning, baseline / forecast control, progress reporting, schedule updates, forecast to complete, resource loading, and risk & opportunity. Your day to day could look involve:Undertake “rolling wave” planning & resource loading for assigned project & work scopesUtilising team inputs creates and tracks plans and schedules, performs risk exploration.Responsible for detailed schedule exploration of network logic and critical pathWorks with cross functional Program Teams to resolve critical path and network conflicts.Performs "what if" scenarios for employee program management teamsPerforms schedule variance exploration by comparing baseline to schedule.Performs earned value exploration in support of assigned programs or projects.Ensures management understanding of network logic, Gantt, milestone lists, and resource information in the schedule.Develop and maintain scheduling procedures for assigned programsUtilise Gantt, PERT, milestone charts, earned value management and other project management techniques to gauge progress and identify performance variances to facilitate focus and intervention on critical areas.Ensures major projects and program schedules and plans are integrated across company functional groups including finance, engineering, material, manufacturing, and quality.However, in the consultancy world, no two days are the same! We are a flexible team that support each other’s projects as well as getting in involved with wider business activities and we believe that variety is key to your development. Experience:Previous major projects experience and be able to provide support and guidance across multiple live projects as well as contribute to tender programmes.Experience within project controls with a focus on planning ideally within a consultancy.Experience in Primavera P6, with experience in Asta Powerproject and MSP beneficial.Strong Excel competence to produce dashboards & supporting data visualization to P6 programmes.Qualifications:Applicants should ideally be HNC, HND or Degree qualified in a Quantity Surveying / Cost Management, Construction Law, or similar / relevant discipline, or in some case applicants with an alternative background (e.g.: Engineering) may be considered.Professional qualifications and/or membership of the APM, RICS, CIOB, CICES, CIPS or other relevant Chartered Institute are desirable, and will be supported if not already attained.What we can offer you: Clear opportunities to develop and grow your career through training and further qualifications Fantastic networking opportunities to grow your personal brand and expand your understanding of the industry Generous holiday allowance plus the option to purchase additional days through the holiday purchase scheme.Highly competitive salary and the opportunity to increase this through continuous reviewsEmployee Assistance Programme to ensure your health and personal well-being comes firstOur global travel scholarship programme gives you the unique opportunity to gain global experienceFlexible working arrangements to ensure you have a healthy work-life balance Volunteering opportunities to engage with your local community or charitable organisationsUnparalleled support from central teams and a company that is recognised as a Great Place to WorkAbout us Gleeds is a global property and construction consultancy with over 150 years of expertise, operating in 28 countries worldwide. From iconic landmarks to critical infrastructure, we drive innovation, sustainability and value, delivering transformative projects that shape communities and redefine the built environment. Gleeds is committed to an inclusive workplace where everyone feels respected and valued. We uphold the principles of Fairness, Inclusion and Respect (FIR) and embrace the diversity of our teams. As an equal opportunities employer, we provide support, flexibility, and accessibility for all. If you require reasonable adjustments, please contact our Talent Team at careers@gleeds.com #LI-GT1#LI-HybridCareers Site Advertising End Date01 Sep 2026Internal Advertising End DateNot SpecifiedAll LocationsLeedsAll Locations is a required fieldSectorInfrastructureAdvertising SalaryCompetitive Salary & Benefits Package

Thrive on openness, respect and collaboration? Good. Us too. Join as our new Principal Fire Engineer. This is a hybrid role and can be based in either our Edinburgh, Manchester, Bath, Leeds, or London office.Your next roleAs a fire engineering team, we pride ourselves on our global reach. With teams located in the UK, Dubai and Riyadh, we bring international expertise to every project. Our team has a breadth of experience across all sectors, new builds and refurbishments and our technical services and expert witness work embeds a progressive learning culture, enabling us to be at the forefront of industry best practice. In-house computational expertise combined with on point design communication supports the full design service we offer and enables a closer collaboration with architects.In this role you will work on complex, pinnacle projects across a range of sectors – including iconic sports stadiums and entertainment venues, mega-projects in the Middle East, advanced manufacturing and scientific research facilities, and so much more. You’ll be joining a diverse, inclusive and technically brilliant group of engineers (around 40-strong), and collaborate with a breadth of specialisms across our multidisciplinary practice. We can offer an outstanding platform for career development, exposing you to some of the most technically challenging projects in the industry which truly push boundaries, and giving your opportunities to take on broader, client-facing and advisory responsibility, working directly with end-user clients.Key Duties Lead / project manage fire engineering projects. Inform and support the building design aspirations, functionality and architectural form throughout the design process Take ownership for client care and general consultancy on projects. Take responsibility for the financial performance of projects, including invoicing and financial monitoring of projects. Represent Buro Happold Fire Engineering at design team meetings, both internal and externally. Build knowledge to be able to identify and specify appropriate fixed fire protection systems, i.e. automatic fire detection and/or suppression to support fire engineering design solutions. Carry out and review fire engineering calculations including smoke modelling and evacuation analysis from simple hand calculations to complex 3D computational modelling (previous CFD experience is welcome but not essential). Guide, mentor and technically review the work of Senior and junior team members, supporting skills development and consistent delivery excellence. Proactively contribute to innovation, tool development and improvement of methods, supporting the evolution of the Fire Engineer discipline. Your skills & experience: Experience as a lead fire engineer on projects. Higher education qualification in engineering or in a fire safety related subject. Demonstrable professional experience in delivering fire and life safety designs and fire engineered solutions for UK-based projects. Track record of gaining agreement for prescriptive and performance-based design solutions from approving authorities. Experience mentoring and developing more junior engineers. What we offer you:Hybrid working arrangements. Attractive salary and benefits package including life assurance and income protection.Private medical insurance. Holiday entitlement of 25 days. flexible holiday arrangements, and your birthday off. Generous company pension scheme.Flexible benefits including cycle scheme, dental insurance, optical cover, travel insurance, season ticket loans, and corporate discounts.Enhanced parental leave policies.3pm finish on the last Friday of the month.A strong commitment to your continuous development. Whatever stage in your career, we have a learning and development programme that will enable and empower you. Entitlement to two memberships to professional bodies or subscriptions.A commitment to your wellbeing through a comprehensive employee assistance programme and wellbeing activities.A supportive and inclusive environment that will welcome you through social and outreach activities from the Young Employees Forum to mentoring.An international culture that wherever your career takes you at Buro Happold, you won’t be far from the exceptional. Bring your knowledge and expertise to one of the world’s most respected consultancies. Ready for something a little less ordinary? Apply now to start your career journey with us.A place for everyoneBuro Happold values an individual's flexible approaches to working patterns as an important part of how you work and achieve balance. We welcome applications from those who are seeking flexibility in their careers. Our exceptional portfolio of projects is the result of the diversity of thought, identities, backgrounds, and experiences that shape us. Appreciating each other’s differences is key, we want employees to feel they don’t have to mask elements of their identity to thrive. We are working to change the lack of representation of marginalised groups in the built environment. We are particularly keen to hear from anyone who feels they are underrepresented in the industry. We have much to learn from one another. Embracing differences allows us to develop the most innovative and elegant solutions.Please let us know if there are any adjustments we could make to the application process to make it easier and more comfortable for you. Contact recruitment@burohappold.com so we can work with you to support you throughout your application. #LI-TW1 #LI-Hybrid Salary Competitive. Frequency Annual Job Reference burohappold/TP/658/2194 Contract Type Permanent Job Category Engineering and Design Discipline Fire Engineering Location London; Bath; Manchester; Leeds; Edinburgh, United Kingdom Closing Date 31 August, 2026

Category & Commercial LeadershipDevelop and implement category strategies across Capex spend, covering manufacturing equipment, engineering services, and construction/civilsDeliver value through effective sourcing, negotiation, and supplier selection, balancing cost, quality, and serviceIdentify and