Inspection jobs in LincolnCreate job alerts

Are you a qualified NDT Inspector with PT and MT certifications, looking for a hands-on role where you can ensure component integrity and support high-quality precision manufacturing?Our exclusive client NMB Minebea UK , part of a global manufacturing group with operations across Europe, Asia, and the Americas, is renowned for precision engineering and the production of mission-critical components.This NDT Inspector role is based in Lincoln, working within the Quality Department. You will perform critical non-destructive testing using Dye Penetrant (PT) and Magnetic Particle (MT) methods to verify the integrity of manufactured components and welds, playing a key role in maintaining the highest quality standards on the shop floor.As the NDT Inspector, your responsibilities will include:Performing Dye Penetrant (PT) and Magnetic Particle (MT) inspections on components and welds in accordance with approved proceduresSetting up, calibrating, and operating NDT equipment using established techniquesInterpreting test results, evaluating indications against acceptance criteria, and accurately classifying defectsPreparing and maintaining NDT procedures, work instructions, and detailed inspection recordsPreparing test areas and ensuring compliance with specifications and quality standardsSupporting production teams with workflow, line balancing, and basic process improvement activitiesCollecting and analysing production data and KPIs to drive continuous improvementProviding day-to-day practical support and guidance to operators on best practicesWorking closely with Production, Quality, Maintenance, and Engineering teams to support quality assurance and new product introductionsObserving and promoting safe working practices at all timesParticipating in waste reduction, cost saving, and efficiency improvement projectsEnsuring full compliance with health & safety standards, quality requirements, and company proceduresAs the NDT Inspector you will bring:EssentialCurrent EN4179 and NAS410 qualifications in Liquid Penetrant Testing (PT) and Magnetic Particle Testing (MT)Proven experience performing PT and MT inspections in a manufacturing environmentStrong attention to detail with the ability to interpret inspection results accuratelyGood communication skills and the ability to work effectively with shop floor and cross-functional teamsCompetence in Microsoft Office (particularly Excel) and the ability to maintain accurate documentationAwareness of health & safety requirements in a production environmentWillingness to learn and support lean manufacturing / continuous improvement principlesDesirableHNC/HND, degree, apprenticeship, or equivalent in Manufacturing, Mechanical, or Industrial EngineeringExperience with Time & Motion studies, cycle time analysis, or standard work developmentFamiliarity with ERP/MRP systems or production reporting toolsBackground in high-volume or precision manufacturingFormal Lean or Six Sigma awareness/trainingExperience in project work or continuous improvement initiativesShift Patterns (Overtime available when required)A Shift (no premium): MonThu 06:0013:35 | Fri 06:0012:45B Shift (20% premium on Friday): MonThu 13:2521:05 | Fri 12:3519:00This NDT Inspector position offers the opportunity to join a well-established, quality-focused manufacturing site where your technical expertise directly contributes to product integrity and operational excellence. Youll work alongside experienced teams in a supportive environment that values precision, safety, and continuous improvement.TPBN1_UKTJ

Product Quality Engineer - LincolnThe Opportunity\n An exciting opportunity has arisen for a Product Quality Engineer to join a fast-growing business supplying the furniture sector with market leading products. \n This is a newly created role responsible for maintaining and improving the technical quality of the company's product portfolio. Working across product quality, supplier quality and new product development, you will ensure products meet the required standards from initial design through to manufacture and customer use. \n You will play a key role in reviewing product specifications, resolving quality issues, managing supplier corrective actions and supporting the development of new products. This is a hands-on position for someone who enjoys working with physical products, solving technical problems and improving processes. \n Working closely with Procurement, NPD, Sales and Operations, you will become a key technical point of contact, helping to protect product quality and drive continuous improvement. Key ResponsibilitiesNew Product Development Support\n\n • Review technical drawings and CAD files to identify potential design, manufacturing or quality risks.\n, • Assess product designs for manufacturability and suitability before supplier release.\n, • Support the approval process for prototypes, samples and pre-production units.\n, • Conduct product inspections, checking dimensions, fit, functionality, finish and compliance against specifications.\n, • Support product testing activities, including external testing programmes where required.\n, • Develop and maintain quality standards and inspection criteria for new products.\nProduct Quality & Continuous Improvement\n\n, • Own the investigation and resolution of product quality issues across the product portfolio.\n, • Manage Non-Conformance Reports (NCRs), ensuring root causes are identified and corrective actions are implemented effectively.\n, • Lead supplier corrective action processes, ensuring issues are properly investigated, resolved and closed out.\n, • Work closely with suppliers to improve product quality, reliability and consistency.\n, • Maintain accurate technical documentation, specifications and product records.\n, • Identify opportunities for quality improvements across existing products and processes.\nSupplier & Technical Support\n\n, • Act as the internal technical authority for the product portfolio\n, • Provide technical guidance to internal teams including Sales, Customer Service and Operations.\n, • Liaise directly with suppliers and customers on technical issues and product requirements.\n, • Support supplier reviews by providing technical insight and quality performance feedback.\n, • Carry out competitor product analysis to support product improvements and commercial decisions.\n, • Maintain awareness of relevant product standards, testing requirements and industry developments.\nAbout You\n We're looking for a technically minded engineer with experience in product quality, supplier quality or product development environments. \n You will ideally have experience working with engineered products, components or manufactured goods, with the ability to understand technical drawings, investigate issues and drive improvements. \n You'll have: \n\n • Experience managing product quality issues, NCRs and corrective actions.\n, • Experience working with suppliers to resolve technical and quality problems.\n, • Ability to interpret engineering drawings and technical specifications.\n, • Strong problem-solving skills with experience using root cause analysis techniques.\n, • Experience supporting product development, validation or approval processes.\n, • Excellent communication skills with the ability to work with technical and non-technical stakeholders.\n, • A structured and methodical approach with strong attention to detail.\n

About UsDynex Semiconductor Ltd is a globally recognised leader in the design, development and manufacture of high-power semiconductor devices and power assemblies. With over 60 years of engineering heritage, our products support industrial, renewable energy, transportation and advanced technology markets worldwide. Based in Lincoln, UK, Dynex serves customers in over 60 countries and prides itself on quality, safety and continuous improvement.The RoleWe are looking for a skilled and motivated Electrician to join our engineering team. The role involves maintaining, installing and improving electrical systems across a busy industrial site, ensuring plant, equipment and facilities operate safely, efficiently and in full compliance with regulations.You will play a key part in supporting production, responding to breakdowns, carrying out planned maintenance and contributing to site improvement projects.Duties and Responsibilities\n\n • Respond promptly to electrical faults and breakdowns to minimise downtime and maintain safe operation of plant and equipment.\n, • Carry out planned preventative maintenance (PPM) in line with electrical safety regulations and site procedures.\n, • Ensure all electrical work complies with statutory requirements, relevant standards and internal compliance expectations.\n, • Install, maintain and upgrade site lighting systems, including energy efficiency improvements where required.\n, • Complete mechanical and electrical (M&E) installations in support of production, facilities and improvement projects.\n, • Test, inspect and certify electrical installations (Where Qualified), ensuring accurate maintenance and compliance records are maintained.\n, • Support continuous improvement initiatives, site upgrades and modifications.\n, • Work safely at all times, adhering to health and safety policies and contributing to a positive safety culture.\nSkills, Experience & Competencies\n\n, • Experience working in an industrial or manufacturing environment.\n, • Working knowledge of mechanical and electrical (M&E) installations.\n, • Experience with lighting installations, upgrades and energy efficiency projects.\n, • Familiarity with planned preventative maintenance systems.\n, • Strong safety-focused mindset with consistent adherence to health and safety procedures.\n, • Good problem-solving skills, with the ability to remain calm and effective under pressure.\n, • Reliable and accountable, taking ownership of tasks through to completion.\n, • Good communication skills, able to liaise effectively with production teams, maintenance colleagues and contractors.\n, • Team-focused, while also capable of working independently with minimal supervision.\n, • Strong time management skills to prioritise breakdowns, maintenance activities and project work.\n, • High attention to detail to ensure quality workmanship, compliance and accurate record keeping.\n, • Proactive and open to continuous improvement, learning and development opportunities.\nQualificationsEssential:\n\n, • NVQ Level 3 in Electrical Installation (or equivalent recognised electrical qualification).\n, • City & Guilds 2382 – Requirements for Electrical Installations (18th Edition Wiring Regulations).\nDesirable:\n\n, • City & Guilds 2391 (or equivalent) – Inspection, Testing and Certification of Electrical Installations.\nREF-230 022

GBR Recruitment are proud to be working exclusively with an experienced family-owned Electrical contractor, based in the heart of Lincolnshire who specialise in all manner of domestic & commercial electrical works. \n This is a great time to be joining them as they are on a growth journey, with them winning an array of new Electrical installation projects across both domestic & commercial properties. \n This modern Electrical solutions business is seeking an experienced Electrician to join their team on a permanent basis to cover Electrical works across predominantly Lincolnshire. \n Your qualifications / certifications will be fully up to date inc. ideally an NVQ Level 3, ECS card, AM2, 2391 inspection & testing, 18th Edition & with strong experience within different property types & different types of Electrical projects. \n As a time-served 18th Edition certified Electrician within this progressive business, you will be working on both 1st, 2nd fix & final fixings, completing the projects OTIF & to the high-quality standard expected by both the business & the customer, with a right first-time approach. \n You will be a customer focused Electrician who is high quality of workmanship focused. \n This is a very small knit team of 5, so flexibility & adaptability to tasks is a must. \n Electrician Attributes: \n\n • Electrician with up-to-date certifications (NVQ Level 3, ECS, AM2, 18th Edition)\n, • Experience in domestic & commercial installations (happy to work in both)\n, • Ability to work independently & as part of a team (lots of alone working)\n, • Strong attention to detail & quality of workmanship focused (right 1st time)\n, • Happy to cover Lincolnshire (15-20 miles radius of Lincoln City)\n, • Own hand / power tools\n\n Hourly basic pay rates range from £20 - £22.50 p/h NEG DOE, with overtime paid at enhanced rates of x1.5, after 40 hours, or if working unsocial hours on certain projects (rare weekends & rare nights etc.. 98% of time would be standard Monday to Friday days). \n Interviews are to take place immediately, with an immediate start for the right person. \n Apply today!

CLC, part of Axis CLC, is a national maintenance and refurbishment provider supporting clients across the healthcare, defence, leisure, heritage, commercial and education sectors. Backed by over 110 years of combined experience and the wider strength of Axis CLC, operating from 23 UK offices and employing more than 2,500 people nationwide, we deliver responsive repairs, planned maintenance, compliance, decarbonisation and refurbishment services through a UK-wide operational network and long-established regional presence. \n The Role \n We’re hiring a proactive Site Manager to lead the delivery of refurbishment and renewal projects across a regional housing and public-sector portfolio. You’ll take full responsibility for site safety, quality, programme and client satisfaction, coordinating internal teams, subcontractors and client representatives to ensure every project is delivered safely, on time, on budget, and to the highest standards. \n This role is project-focused, covering full and partial refurbishments, internal and external renewals, and compliance-related upgrade works. You’ll lead from the front on construction quality, safety, and stakeholder collaboration within a live, customer-focused environment. \n Responsibilities \n\n • \n Project delivery: Manage end-to-end delivery of refurbishment and renewal projects (e.g., kitchen and bathroom upgrades, roof replacements, doors and windows, external fabric works, compliance upgrades, EWI, and communal area refurbishments). \n • \n Planning & coordination: Review scopes, specifications and drawings; develop phase and short-term programmes; ensure materials, labour and logistics are in place for efficient delivery. \n • \n Health & Safety management: Lead by example on site safety; produce and enforce RAMS, permits and method statements; conduct inductions, toolbox talks and site audits; ensure CDM compliance. \n • \n Quality assurance: Implement inspection and test plans (ITPs), snag/de-snag processes, and ensure all workmanship meets specification and contractual standards. \n • \n Programme control: Track progress against schedule, manage resources and supply chain performance, and maintain accurate site records, diaries and weekly reports. \n • \n Stakeholder liaison: Coordinate with clients, residents, RLOs and consultants to plan works and minimise disruption, maintaining clear communication and professional representation on site. \n • \n Leadership: Line-manage site teams, trades and subcontractors; set performance expectations, provide coaching and drive high standards of safety, quality and delivery. \n • \n Commercial awareness: Support the Contract Manager with valuations, variations and cost tracking; identify risks and opportunities to maintain financial control. \n\n About You \n\n • \n Proven experience managing refurbishment, renewal or improvement projects in housing, public buildings or similar environments. \n • \n Strong technical knowledge of building fabric, refurbishment sequencing, and finishing standards. \n • \n Excellent understanding of H&S and CDM regulations, with experience producing and enforcing RAMS and safe systems of work. \n • \n Skilled in coordinating direct labour and subcontractors across multiple trades. \n • \n Effective communicator with strong client and stakeholder management skills. \n • \n Competent with digital systems (reporting, scheduling, MS Office, etc.). \n • \n Full UK driving licence. \n • \n Security clearance: Must hold or be immediately eligible for SC clearance and meet/maintain BPSS as a minimum; willing to undergo vetting and periodic renewals. \n • \n SMSTS (or SSSTS), First Aid, Asbestos Awareness; NEBOSH or equivalent H&S qualification. \n • \n Trade background, HNC/HND or equivalent in construction management. \n • \n APM/Prince2 or similar project delivery certification. \n • \n Familiarity with MOD standards, heritage refurbishment, or live environment delivery. \n • \n Experience delivering decarbonisation, compliance upgrades or PAS 2035/2038 retrofit projects (advantageous). \n\n What We Offer \n\n • \n Competitive salary and benefits \n • \n 25 days’ holiday + Bank Holidays \n • \n Long-service awards at key milestones \n • \n Perkbox (free coffees, cinema tickets, discounts & more) \n • \n 1 paid volunteer day each year \n • \n If this sounds like you, we’d love to hear from you, apply today. \n\n Why Axis CLC \n Joining Axis CLC means being part of a national team delivering essential services across housing, education, healthcare, defence and commercial property. We value insight, quality and evidence-based decision-making, and offer roles where your work directly influences business performance and long-term growth. \n Our Commitment to Inclusion \n Many faces, one Axis CLC. We value diversity and are proud to be an equal-opportunity employer. If you require any adjustments during the hiring process, please let us know.

\n 2 weeks \n We are currently seeking an experienced Site Manager to manage the a small refurbishment project for two weeks looking after the Electrical contractors, floorers and decorators. Key Responsibilities:\n \n • Managing and coordinating all finishing trades on site\n, • Driving the programme to ensure works are completed on time and to a high standard\n, • Managing snagging lists and quality control\n, • Ensuring health & safety standards are met at all times\n, • Liaising with subcontractors, consultants, and senior management\n, • Preparing areas for inspection, handover, and practical completion\n Requirements:\n \n, • Proven experience as a Site Manager\n, • Valid SMSTS, CSCS Black Card, and First Aid certificates –\n, • Strong eye for detail and ability to manage multiple trades\n, • Excellent communication and organisational skills\n \n Linsco is an equal opportunities employer. All applicants will be considered on their merits regardless of background, characteristics or personal circumstances. All applications will be dealt with in the strictest confidence \n #J-18808-Ljbffr

Quality Control Manager – NMB Minebea UK (Lincoln) \n \n Are you an experienced Quality professional with strong leadership skills, ready to lead a full Quality Control function and drive world-class standards, continuous improvement, and regulatory compliance in a precision engineering environment? \n \n Our exclusive client NMB Minebea UK, part of a global manufacturing group with operations across Europe, Asia, and the Americas, is renowned for precision engineering and the production of mission-critical components. \n \n This Quality Control Manager role is based in Lincoln. You will lead the Quality Control department (20+ engineers and inspectors), ensuring high standards of safety, quality, delivery, and continuous improvement while embedding a culture of world-class manufacturing and aerospace regulatory compliance across the site. \n \n As the Quality Control Manager, your responsibilities will include: \n\n • Demonstrating strong leadership to organise the Quality Control function, set clear expectations, and ensure every area understands its role in quality assurance, quality control, and compliance deliverables\n, • Performing training gap analysis across all quality functions and establishing clear strategies to upskill the team\n, • Maintaining a hands-on, visible presence on the shop floor and across the business\n, • Ensuring full company compliance with aerospace QMS procedures (ISO 9001, AS9100, NADCAP, etc.)\n, • Supporting inspectors in driving best-practice inspection methods\n, • Leading root-cause analysis investigations using proven problem-solving methodologies such as 8D and 5 Why\n, • Ensuring compliance with First Article Inspection Reports to AS9102\n, • Overseeing company-wide environmental compliance procedures to ISO 14001\n, • Driving reduction of non-conformances, timely resolution of manufacturing/production issues, and effective continuous improvement through regular reporting on NCRs, KPIs, customer issues, shop-floor deviations/concessions, and supplier performance\n\n \n As the Quality Control Manager you will bring: \n Essential \n\n • Apprenticeship, HNC/D (or equivalent) in an engineering discipline\n, • Strong leadership capability with a proven track record of improving team performance\n, • Background in quality assurance and quality control within a highly regulated environment\n, • Ability to lead a large quality function\n, • Demonstrable experience resolving manufacturing issues using 8D, 5 Why, and similar methodologies\n, • Hands-on approach to leadership with a willingness to be visible across all areas\n, • Very strong communication and presentation skills (verbal and written)\n, • Inspection and metrology experience\n, • Competent in all Microsoft packages with strong overall IT skills\n\n Desirable \n\n • Degree in an engineering discipline\n, • Aerospace manufacturing environment experience\n, • Experience with aerospace standards such as AS9100, AS9102, NADCAP, etc.\n, • Knowledge of aerospace regulatory compliance (CAA, EASA, FAA)\n, • Knowledge of machining processes and non-destructive testing (NDT) procedures\n\n \n Hours of work Day Shift Monday to Thursday 07:30–16:00 Friday 07:30–12:30 \n \n Benefits \n\n • 25 days holiday + bank holidays\n, • Company pension – 5% employer contribution\n, • Subsidised health care\n, • Personal accident plan\n, • Uniform\n, • Bike to Work scheme\n, • Subsidised canteen\n, • On-site parking\n, • Long service award\n, • Employee referral scheme\n, • Death in service scheme\n\n \n This Quality Control Manager position offers the opportunity to take the next step in your career, leading a substantial QC team in a stable, well-established manufacturing site that values technical excellence, process discipline, and people leadership. You will play a key role in embedding a culture of world-class manufacturing, reducing non-conformances, and ensuring the highest quality standards for precision aerospace components.

CNC Machinist Turning/Milling/GrindingAre you a skilled CNC Machinist looking to work with cutting-edge machinery in a high-quality manufacturing environment? Join NMB Minebea at their Lincoln site and become part of a collaborative team delivering precision components for world-class aerospace customers.This is an exciting opportunity to build a long-term career in a stable, forward-thinking organisation that values quality, teamwork, and continuous improvement.What Youll Be Doing as CNC Machinist:Ensuring the smooth, efficient running of CNC machinesProducing components that consistently meet strict quality standardsDelivering work On Time In Full (OTIF)Carrying out self-inspection and sanctioning of your own workWorking across turning, milling, and grinding operations (cell-dependent)Supporting excellent workplace organisation and 5S standardsGaining full cross-training across all cell disciplinesOccasionally assisting with assembly, pinning, or non-machinery tasksWhat Were Looking for as CNC Machinist:Essential:Previous experience in CNC turning or milling or grindingConfident using standard measuring equipmentBackground in an engineering or manufacturing environmentStrong numerical skills and attention to detailA reliable, team-focused attitude with a commitment to qualityComfortable following procedures and working to targetsDesirable:NVQ in Engineering Manufacture (or equivalent) / Advanced ApprenticeshipGCSE English & Maths (Grade C or above)Computer literacyShift Pattern:A Shift:MonThu: 6:00am 1:35pmFri: 6:00am 12:45pmB Shift:MonThu: 1:25pm 9:05pmFri: 12:35pm 7:00pm ( 20% shift premium )Overtime available when requiredWhat Youll Get in Return as CNC Machinist:Competitive salary (dependent on experience) plus shift premium25 days holiday + bank holidaysCompany pension with 5% employer contributionSubsidised healthcare and personal accident planUniform providedSubsidised canteen & on-site parkingBike to Work SchemeEmployee referral & suggestion schemesLong service awards & death in service coverWhy Join NMB?At NMB Minebea, youll be more than just a machinist, youll be a valued contributor to a high performing team, with opportunities to develop your skills, broaden your experience, and build a secure future in advanced manufacturing.Ready to take the next step? Apply today and help NMB deliver engineering excellence.TPBN1_UKTJ

CNC Machinist Turning/Milling/GrindingAre you a skilled CNC Machinist looking to work with cutting-edge machinery in a high-quality manufacturing environment? Join NMB Minebea at their Lincoln site and become part of a collaborative team delivering precision components for world-class aerospace customers.This is an exciting opportunity to build a long-term career in a stable, forward-thinking organisation that values quality, teamwork, and continuous improvement.What Youll Be Doing as CNC Machinist:Ensuring the smooth, efficient running of CNC machinesProducing components that consistently meet strict quality standardsDelivering work On Time In Full (OTIF)Carrying out self-inspection and sanctioning of your own workWorking across turning, milling, and grinding operations (cell-dependent)Supporting excellent workplace organisation and 5S standardsGaining full cross-training across all cell disciplinesOccasionally assisting with assembly, pinning, or non-machinery tasksWhat Were Looking for as CNC Machinist:Essential:Previous experience in CNC turning or milling or grindingConfident using standard measuring equipmentBackground in an engineering or manufacturing environmentStrong numerical skills and attention to detailA reliable, team-focused attitude with a commitment to qualityComfortable following procedures and working to targetsDesirable:NVQ in Engineering Manufacture (or equivalent) / Advanced ApprenticeshipGCSE English & Maths (Grade C or above)Computer literacyShift Pattern:A Shift:MonThu: 6:00am 1:35pmFri: 6:00am 12:45pmB Shift:MonThu: 1:25pm 9:05pmFri: 12:35pm 7:00pm ( 20% shift premium )Overtime available when requiredWhat Youll Get in Return as CNC Machinist:Competitive salary (dependent on experience) plus shift premium25 days holiday + bank holidaysCompany pension with 5% employer contributionSubsidised healthcare and personal accident planUniform providedSubsidised canteen & on-site parkingBike to Work SchemeEmployee referral & suggestion schemesLong service awards & death in service coverWhy Join NMB?At NMB Minebea, youll be more than just a machinist, youll be a valued contributor to a high performing team, with opportunities to develop your skills, broaden your experience, and build a secure future in advanced manufacturing.Ready to take the next step? Apply today and help NMB deliver engineering excellence.TPBN1_UKTJ

Are you a Quality Inspector who enjoys being at the heart of manufacturing qualitycatching issues early, working from drawings and GD&T, and helping production deliver right-first-time ?Our exclusive client NMB Minebea UK , part of a multi-billion-dollar global manufacturing group with operations across Europe, Asia, and the Americas, is renowned for precision engineering and the production of mission-critical components.This role is based at Doddington Road, Lincoln (LN6 3RA) , supporting manufacturing operations through first-off and in-process inspection activities. Youll help ensure components meet engineering requirements and support production and quality objectives in a fast-paced environment.As the Quality Inspector, your responsibilities will include: Carrying out first-off inspections to validate set-ups and confirm products meet specification prior to releasePerforming in-process inspections and ongoing monitoring of production outputInterpreting and inspecting to engineering drawings, specifications, and GD&T requirementsUsing a range of manual measuring equipment (e.g., micrometers, verniers, gauges) and inspection techniquesIdentifying, recording, and reporting non-conformances in line with quality proceduresSupporting containment, investigation, and resolution of shop-floor quality issuesWorking closely with Production, Engineering, and Quality teams to support corrective actions and prevent recurrenceCompleting inspection records, reports and documentation accuratelyEnsuring all activities comply with Health, Safety and Environmental standardsAs the Quality Inspector you will bring: Minimum 5 years experience in a quality inspection role within a manufacturing environmentStrong experience in first-off and in-process inspectionProven ability to read and interpret engineering drawings and GD&TConfident use of manual measuring equipment (micrometers, verniers, gauges etc.)Excellent attention to detail and a quality-focused mindsetAbility to work effectively within a production team environment, with good communication skillsDesirable (but not essential): Time-served background in engineering/manufacturingExperience in high-volume or precision manufacturingFamiliarity with quality systems, inspection documentation and traceabilityExposure to root cause analysis / quality problem-solvingShift Pattern / Hours (A/B Shift) Overtime available when required:A Shift: MonThu 6:00am1:35pm | Fri 6:00am12:45pmB Shift: MonThu 1:25pm9:05pm | Fri 12:35pm7:00pm ( 20% premium Friday )(Additional site shift patterns may also operate.)Benefits 25 days holiday + bank holidaysCompany pension (5% employer contribution)Subsidised health care & personal accident planDeath in service schemeUniform, bike to work scheme, employee suggestion schemeOn-site canteen & parkingLong service award & employee referral schemeThis Quality Inspector position offers the chance to join a well-established site that values quality, process discipline, and technical capability. Youll be working alongside experienced colleagues and contributing to consistent product quality across manufacturing.All successful applicants will be contacted within two working daysTPBN1_UKTJ

Are you a Quality Manager or a Quality Engineer with leadership experience, ready to take the lead in a senior-level role within a highly regulated, precision engineering environment?Were recruiting a Quality Manager, to work with a globally recognised aerospace manufacturing business based in Lincolnshire, operating under a multi-billion-dollar industrial group who are rapidly growing.What Youll Be DoingAs Quality Manager, you will be part of the Senior Leadership Team, overseeing a team of 30+ quality professionals and owning the site-level QC function. Key responsibilities include:Leading the training, development, and performance of a large QC teamManaging metrology, inspection and GD&TLeading MRB activities and supporting root cause analysis and corrective actions activitiesDriving compliance to AS9100, ISO9001, AS9102, NADCAP, and ISO14001Embedding a quality-first mindset, and continuous improvement activities across engineering, production, and leadership teamWhat Youll Need as Quality Manager:HNC/HND/Apprenticeship/Degree in an Engineering disciplineProven leadership experience in quality within regulated manufacturing, ideally aerospaceDeep knowledge of GD&T, metrology and inspection processesStrong expertise in RCA methodologies such as 8D, 5 Whys, IshikawaA hands-on leadership style, confident working on the shop floor and engaging at senior levelsAs Quality Manager, you'll have the opportunity to shape long-term quality strategy, and be part of a globally recognised group with strong financial backing and clear progression path.Please apply today !TPBN1_UKTJ

Health & Safety Advisor (Construction) \n £45,000 - £55,000 + Industry Training + Career Progression + Weekdays Only + Company Benefits \n Lincoln \n Are you a Health & Safety professional with a background in construction looking to join an established newbuild construction company where you'll have a hands-on role in maintaining high safety standards across a varied portfolio of sites? \n Do you enjoy working closely with site teams, carrying out inspections, completing risk assessments and acting as a trusted advisor to ensure projects are delivered safely and in line with current legislation? \n The company are an established Lincoln-based property and construction business with a strong reputation for delivering high-quality projects. \n Due to continued growth, they are looking for a proactive and detail-oriented Health & Safety Advisor to support their teams across construction sites and agricultural operations. \n This is an excellent opportunity for a Health & Safety professional who enjoys being out on-site, building strong relationships with operational teams and having the confidence to challenge unsafe practices while helping develop a positive safety culture across the business. \n The Role: \n\n • Ensure compliance with current Health & Safety legislation, company policies and procedures\n, • Carry out regular inspections across construction sites and farms\n, • Monitor site compliance with Risk Assessments and Method Statements (RAMS)\n, • Assess risks associated with spontaneous or unplanned site activities and produce specific Method Statements where required\n, • Ensure weekly and monthly Health & Safety inspections are completed, recorded and appropriately filed\n, • Issue permits for temporary works, excavations, hot works and other controlled activities\n\n The Person: \n\n • NEBOSH certified\n, • Previous Health & Safety experience within the construction industry\n, • Knowledge of CDM regulations\n\n Reference Number: BBBH26776 \n Keywords: Health & Safety Co-ordinator, Health and Safety Coordinator, H&S Coordinator, HSE Advisor, H&S Advisor, Health & Safety Officer, Construction Safety, NEBOSH, Construction Health & Safety, RAMS, Risk Assessments, Method Statements, Site Inspections, Safety Inspections, Construction Compliance, CDM Regulations, Temporary Works, Scaffold Inspection, Safety, Compliance, HSEQ, SHEQ, EHS, Safety Management, Contractor Management, Lincoln, Lincolnshire \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skillset. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website. \n

Quality Control Manager NMB Minebea UK (Lincoln)Are you an experienced Quality professional with strong leadership skills, ready to lead a full Quality Control function and drive world-class standards, continuous improvement, and regulatory compliance in a precision engineering environment?Our exclusive client NMB Minebea UK, part of a global manufacturing group with operations across Europe, Asia, and the Americas, is renowned for precision engineering and the production of mission-critical components.This Quality Control Manager role is based in Lincoln. You will lead the Quality Control department (30+ engineers and inspectors), ensuring high standards of safety, quality, delivery, and continuous improvement while embedding a culture of world-class manufacturing and aerospace regulatory compliance across the site.As the Quality Control Manager, your responsibilities will include:Demonstrating strong leadership to organise the Quality Control function, set clear expectations, and ensure every area understands its role in quality assurance, quality control, and compliance deliverablesPerforming training gap analysis across all quality functions and establishing clear strategies to upskill the teamMaintaining a hands-on, visible presence on the shop floor and across the businessEnsuring full company compliance with aerospace QMS procedures (ISO 9001, AS9100, NADCAP, etc.)Supporting inspectors in driving best-practice inspection methodsLeading root-cause analysis investigations using proven problem-solving methodologies such as 8D and 5 WhyEnsuring compliance with First Article Inspection Reports to AS9102Overseeing company-wide environmental compliance procedures to ISO 14001Driving reduction of non-conformances, timely resolution of manufacturing/production issues, and effective continuous improvement through regular reporting on NCRs, KPIs, customer issues, shop-floor deviations/concessions, and supplier performanceAs the Quality Control Manager you will bring:EssentialApprenticeship, HNC/D (or equivalent) in an engineering disciplineStrong leadership capability with a proven track record of improving team performanceBackground in quality assurance and quality control within a highly regulated environmentAbility to lead a large quality functionDemonstrable experience resolving manufacturing issues using 8D, 5 Why, and similar methodologiesHands-on approach to leadership with a willingness to be visible across all areasVery strong communication and presentation skills (verbal and written)Inspection and metrology experienceCompetent in all Microsoft packages with strong overall IT skillsDesirableDegree in an engineering disciplineAerospace manufacturing environment experienceExperience with aerospace standards such as AS9100, AS9102, NADCAP, etc.Knowledge of aerospace regulatory compliance (CAA, EASA, FAA)Knowledge of machining processes and non-destructive testing (NDT) proceduresHours of work Day Shift Monday to Thursday 07:3016:00 Friday 07:3012:30Benefits25 days holiday + bank holidaysCompany pension 5% employer contributionSubsidised health carePersonal accident planUniformBike to Work schemeSubsidised canteenOn-site parkingLong service awardEmployee referral schemeDeath in service schemeThis Quality Control Manager position offers the opportunity to take the next step in your career, leading a substantial QC team in a stable, well-established manufacturing site that values technical excellence, process discipline, and people leadership. You will play a key role in embedding a culture of world-class manufacturing, reducing non-conformances, and ensuring the highest quality standards for precision aerospace components.TPBN1_UKTJ

CNC Machinist Turning/Milling/GrindingAre you a skilled CNC Machinist looking to work with cutting-edge machinery in a high-quality manufacturing environment? Join NMB Minebea at their Lincoln site and become part of a collaborative team delivering precision components for world-class aerospace customers.This is an exciting opportunity to build a long-term career in a stable, forward-thinking organisation that values quality, teamwork, and continuous improvement.What Youll Be Doing as CNC Machinist:Ensuring the smooth, efficient running of CNC machinesProducing components that consistently meet strict quality standardsDelivering work On Time In Full (OTIF)Carrying out self-inspection and sanctioning of your own workWorking across turning, milling, and grinding operations (cell-dependent)Supporting excellent workplace organisation and 5S standardsGaining full cross-training across all cell disciplinesOccasionally assisting with assembly, pinning, or non-machinery tasksWhat Were Looking for as CNC Machinist:Essential:Previous experience in CNC turning or milling or grindingConfident using standard measuring equipmentBackground in an engineering or manufacturing environmentStrong numerical skills and attention to detailA reliable, team-focused attitude with a commitment to qualityComfortable following procedures and working to targetsDesirable:NVQ in Engineering Manufacture (or equivalent) / Advanced ApprenticeshipGCSE English & Maths (Grade C or above)Computer literacyShift Pattern:A Shift:MonThu: 6:00am 1:35pmFri: 6:00am 12:45pmB Shift:MonThu: 1:25pm 9:05pmFri: 12:35pm 7:00pm ( 20% shift premium )Overtime available when requiredWhat Youll Get in Return as CNC Machinist:Competitive salary (dependent on experience) plus shift premium25 days holiday + bank holidaysCompany pension with 5% employer contributionSubsidised healthcare and personal accident planUniform providedSubsidised canteen & on-site parkingBike to Work SchemeEmployee referral & suggestion schemesLong service awards & death in service coverWhy Join NMB?At NMB Minebea, youll be more than just a machinist, youll be a valued contributor to a high performing team, with opportunities to develop your skills, broaden your experience, and build a secure future in advanced manufacturing.Ready to take the next step? Apply today and help NMB deliver engineering excellence.TPBN1_UKTJ

Rullion are looking to recruit for the following position :Supplier Quality EngineerLocation :LincolnASAP Start6 months rolling (long term)Inside IR35Paye rate £30ph-£35 ,Umbrella rate £40.50Hybrid 3 days per week office.Gas Turbine IndustryAs a Supplier Quality Engineer (SQE) for blades and vanes (BV) supporting our Small Gas Turbine (SGT) business, you will be part of a growing team in a position that entails a large responsibility.Your day will be filled with interesting supplier interactions such as; addressing, processing and containing non-conformances, utilising your quality experience with tools such as 8D, RCA's and 5 why's, analysing data for trends and driving continuous improvement. You'll collaborate internally with experienced cross-functional teams to uphold Siemens Energy quality standards, while fostering strong relationships with our valued suppliers.We work in a global, multi-cultural environment with contacts across the world. Good people skills be key to your success.How You'll Make an ImpactSupplier Involvement and Collaboration: Engage with suppliers to help resolve process related issues, including non-conformance management and containment.Supplier Quality Supervision: Oversee supplier quality performance, including corrective and preventive actions, initiate quality improvement programs/initiatives and risk mitigation measures.Monitoring and Communication: Continuously monitor and report supplier quality performance, help contribute to KPI's and communicate risks.Product and Process Qualifications: Supporting Product and Process Qualifications (PPQ), supporting suppliers in adhering to Siemens Energy Quality Management Processes and tools.What You BringTechnical and Engineering Experience: A solid background in Engineering, R&D, or manufacturing is required (time served or degree qualified), with demonstrable experience of being a self-starter and dealing with unexpected supplier quality issues from beginning to end. Knowledge of inspection methodologies and capability. Knowledge of drawing interpretation (Geometric Dimensioning and Tolerancing). Experience in gas turbine blade/vane machining, casting and/or surface coating technology would be highly desirable. IT skills including excel/data manipulation.Quality and Risk Management: Proficiency in quality methods (5 why, FMEA, 8D, RCA) and risk management, with a focus on product functionality, delivery/cost, and resource constraints. Familiarity with Quality Management Systems (e.g. ISO9001), Supplier Quality Management (SQM) and Quality Control routines.Interpersonal and Communication Skills: Strong interpersonal and presentation skills across all levels of business. Developed initiative and diplomacy skills. Experience working within a global environment with good cultural awareness. Proven ability to manage multi-problem investigations simultaneously.Commitment and Travel: Demonstrates commitment, collaboration, positively and structured work habits, with a willingness to travel as part of the job.About the TeamWorking closely with the non-blade and vane commodity supplier quality group, you will be part of a team with wide competence and experience, where we learn from you, and from each other. We are a mixed group with different backgrounds, ages and experiences. Here you will work in an exciting environment with challenging projects, talented engineers and the chance to developPPE provided by client when required . H&S on site and first day induction .Hazards associated with site such as trips slips and falls.If available please submit CV and a member of the team will be in touchRullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.TPBN1_UKTJ

Take on a temporary contract as a Gold Card Electrician , carrying out first- and second-fix electrical work on kitchen rewires across Burton upon Trent. This is an immediate opportunity offering around £26 per hour, with several weeks of work available and a further requirement throughout September.Youll be working mainly within occupied or refurbished kitchens as part of an established programme completing around five kitchens per week. A quick start is preferred to allow for a handover with the existing team before planned holiday cover.Id love to see CVs from anyone who has worked as a Gold Card Electrician , Domestic Electrician or Installation Electrician, particularly within kitchen rewires or planned refurbishment programmes.As a Gold Card Electrician, you will be:Completing first-fix electrical work on kitchen rewiresCarrying out second-fix installations and connectionsWorking to a programme of approximately five kitchens per weekIdentifying and reporting electrical defects or safety concernsUsing your own tools and electrical testing equipmentWorking in line with BS 7671 and current health and safety requirementsCoordinating with the site team to keep works on scheduleId love to speak to any Gold Card Electrician who has:A valid JIB/ECS Gold Card essential18th Edition Wiring RegulationsCity & Guilds 2391 Inspection and Testing desirableAM2 qualification desirableStrong first- and second-fix electrical experienceExperience with domestic kitchen rewires or planned refurbishment work preferredOwn tools, tester and necessary equipmentReliable transportThe role is offering the following benefits:Around £26 per hourImmediate start availableSeveral weeks of contract workFurther work expected from early September until the end of SeptemberConsistent programme of kitchen rewiresLocal work across Burton upon TrentLocation & travelThis Gold Card Electrician role is based predominantly in Burton upon Trent, making it well located for electricians travelling from Derby, Nottingham and surrounding Staffordshire areas. Local mileage into Burton upon Trent is expected to be included within the agreed hourly rate, and your own reliable transport will be required.If this Gold Card Electrician role sounds like something youd be interested in, apply now or contact Paris to find out more.Paris07451262464TPBN1_UKTJ

Are you a qualified NDT Inspector with PT and MT certifications, looking for a hands-on role where you can ensure component integrity and support high-quality precision manufacturing?Our exclusive client NMB Minebea UK , part of a global manufacturing group with operations across Europe, Asia, and the Americas, is renowned for precision engineering and the production of mission-critical components.This NDT Inspector role is based in Lincoln, working within the Quality Department. You will perform critical non-destructive testing using Dye Penetrant (PT) and Magnetic Particle (MT) methods to verify the integrity of manufactured components and welds, playing a key role in maintaining the highest quality standards on the shop floor.As the NDT Inspector, your responsibilities will include:Performing Dye Penetrant (PT) and Magnetic Particle (MT) inspections on components and welds in accordance with approved proceduresSetting up, calibrating, and operating NDT equipment using established techniquesInterpreting test results, evaluating indications against acceptance criteria, and accurately classifying defectsPreparing and maintaining NDT procedures, work instructions, and detailed inspection recordsPreparing test areas and ensuring compliance with specifications and quality standardsSupporting production teams with workflow, line balancing, and basic process improvement activitiesCollecting and analysing production data and KPIs to drive continuous improvementProviding day-to-day practical support and guidance to operators on best practicesWorking closely with Production, Quality, Maintenance, and Engineering teams to support quality assurance and new product introductionsObserving and promoting safe working practices at all timesParticipating in waste reduction, cost saving, and efficiency improvement projectsEnsuring full compliance with health & safety standards, quality requirements, and company proceduresAs the NDT Inspector you will bring:EssentialCurrent EN4179 and NAS410 qualifications in Liquid Penetrant Testing (PT) and Magnetic Particle Testing (MT)Proven experience performing PT and MT inspections in a manufacturing environmentStrong attention to detail with the ability to interpret inspection results accuratelyGood communication skills and the ability to work effectively with shop floor and cross-functional teamsCompetence in Microsoft Office (particularly Excel) and the ability to maintain accurate documentationAwareness of health & safety requirements in a production environmentWillingness to learn and support lean manufacturing / continuous improvement principlesDesirableHNC/HND, degree, apprenticeship, or equivalent in Manufacturing, Mechanical, or Industrial EngineeringExperience with Time & Motion studies, cycle time analysis, or standard work developmentFamiliarity with ERP/MRP systems or production reporting toolsBackground in high-volume or precision manufacturingFormal Lean or Six Sigma awareness/trainingExperience in project work or continuous improvement initiativesShift Patterns (Overtime available when required)A Shift (no premium): MonThu 06:0013:35 | Fri 06:0012:45B Shift (20% premium on Friday): MonThu 13:2521:05 | Fri 12:3519:00Benefits25 days holiday + bank holidaysCompany pension (5% employer contribution)Subsidised health care & personal accident planDeath in service schemeUniform, bike to work scheme, employee suggestion schemeOn-site canteen & parkingLong service award & employee referral schemeThis NDT Inspector position offers the opportunity to join a well-established, quality-focused manufacturing site where your technical expertise directly contributes to product integrity and operational excellence. Youll work alongside experienced teams in a supportive environment that values precision, safety, and continuous improvement.TPBN1_UKTJ

CNC Machinist Turning/Milling/GrindingAre you a skilled CNC Machinist looking to work with cutting-edge machinery in a high-quality manufacturing environment? Join NMB Minebea at their Lincoln site and become part of a collaborative team delivering precision components for world-class aerospace customers.This is an exciting opportunity to build a long-term career in a stable, forward-thinking organisation that values quality, teamwork, and continuous improvement.What Youll Be Doing as CNC Machinist:Ensuring the smooth, efficient running of CNC machinesProducing components that consistently meet strict quality standardsDelivering work On Time In Full (OTIF)Carrying out self-inspection and sanctioning of your own workWorking across turning, milling, and grinding operations (cell-dependent)Supporting excellent workplace organisation and 5S standardsGaining full cross-training across all cell disciplinesOccasionally assisting with assembly, pinning, or non-machinery tasksWhat Were Looking for as CNC Machinist:Essential:Previous experience in CNC turning or milling or grindingConfident using standard measuring equipmentBackground in an engineering or manufacturing environmentStrong numerical skills and attention to detailA reliable, team-focused attitude with a commitment to qualityComfortable following procedures and working to targetsDesirable:NVQ in Engineering Manufacture (or equivalent) / Advanced ApprenticeshipGCSE English & Maths (Grade C or above)Computer literacyShift Pattern:A Shift:MonThu: 6:00am 1:35pmFri: 6:00am 12:45pmB Shift:MonThu: 1:25pm 9:05pmFri: 12:35pm 7:00pm ( 20% shift premium )Overtime available when requiredWhat Youll Get in Return as CNC Machinist:Competitive salary (dependent on experience) plus shift premium25 days holiday + bank holidaysCompany pension with 5% employer contributionSubsidised healthcare and personal accident planUniform providedSubsidised canteen & on-site parkingBike to Work SchemeEmployee referral & suggestion schemesLong service awards & death in service coverWhy Join NMB?At NMB Minebea, youll be more than just a machinist, youll be a valued contributor to a high performing team, with opportunities to develop your skills, broaden your experience, and build a secure future in advanced manufacturing.Ready to take the next step? Apply today and help NMB deliver engineering excellence.TPBN1_UKTJ

CNC Machinist Turning/Milling/GrindingAre you a skilled CNC Machinist looking to work with cutting-edge machinery in a high-quality manufacturing environment? Join NMB Minebea at their Lincoln site and become part of a collaborative team delivering precision components for world-class aerospace customers.This is an exciting opportunity to build a long-term career in a stable, forward-thinking organisation that values quality, teamwork, and continuous improvement.What Youll Be Doing as CNC Machinist:Ensuring the smooth, efficient running of CNC machinesProducing components that consistently meet strict quality standardsDelivering work On Time In Full (OTIF)Carrying out self-inspection and sanctioning of your own workWorking across turning, milling, and grinding operations (cell-dependent)Supporting excellent workplace organisation and 5S standardsGaining full cross-training across all cell disciplinesOccasionally assisting with assembly, pinning, or non-machinery tasksWhat Were Looking for as CNC Machinist:Essential:Previous experience in CNC turning or milling or grindingConfident using standard measuring equipmentBackground in an engineering or manufacturing environmentStrong numerical skills and attention to detailA reliable, team-focused attitude with a commitment to qualityComfortable following procedures and working to targetsDesirable:NVQ in Engineering Manufacture (or equivalent) / Advanced ApprenticeshipGCSE English & Maths (Grade C or above)Computer literacyShift Pattern:A Shift:MonThu: 6:00am 1:35pmFri: 6:00am 12:45pmB Shift:MonThu: 1:25pm 9:05pmFri: 12:35pm 7:00pm ( 20% shift premium )Overtime available when requiredWhat Youll Get in Return as CNC Machinist:Competitive salary (dependent on experience) plus shift premium25 days holiday + bank holidaysCompany pension with 5% employer contributionSubsidised healthcare and personal accident planUniform providedSubsidised canteen & on-site parkingBike to Work SchemeEmployee referral & suggestion schemesLong service awards & death in service coverWhy Join NMB?At NMB Minebea, youll be more than just a machinist, youll be a valued contributor to a high performing team, with opportunities to develop your skills, broaden your experience, and build a secure future in advanced manufacturing.Ready to take the next step? Apply today and help NMB deliver engineering excellence.TPBN1_UKTJ

Job Title: Site Manager Location: LincolnRate: £270 - £280 per day2 weeksWe are currently seeking an experienced Site Manager to manage the a small refurbishment project for two weeks looking after the Electrical contractors, floorers and decorators.Key Responsibilities:Managing and coordinating all finishing trades on siteDriving the programme to ensure works are completed on time and to a high standardManaging snagging lists and quality controlEnsuring health & safety standards are met at all timesLiaising with subcontractors, consultants, and senior managementPreparing areas for inspection, handover, and practical completionRequirements:Proven experience as a Site ManagerValid SMSTS , CSCS Black Card , and First Aid certificates -Strong eye for detail and ability to manage multiple tradesExcellent communication and organisational skillsIf you're available and interested, please apply today or contact us for further information.ApplicationsIf you feel that you have the relevant experience to be successful in this position and would like to find out more, please apply online today, attaching a copy of your current CV.Due to the vast number of applications that we receive, it is not possible for us to contact all applicants; therefore, only suitable candidates will be contacted. If you do not hear anything back within 7 days of submitting your application, you have unfortunately not been selected.Linsco is an equal opportunities employer. All applicants will be considered on their merits regardless of background, characteristics or personal circumstances. All applications will be dealt with in the strictest confidence.TPBN1_UKTJ

Instrumentation & Controls Engineer. Carry out calibration, maintenance, inspection and repair of instrumentation and control systems. Strong electrical and instrumentation fault-finding experience.

Siemens Energy seeks a Manufacturing Technician in Lincoln to ensure product quality in Small Gas Turbine manufacturing.You will perform inspections, validate components, and support compliance with engineering standards.The role demands a strong background in precision manufacturing and inspection

Solar PV Electrician Field Based - Covering: Lincolnshire, South/East Yorkshire, East Midlands (LN & NG Postcodes and Surrounding Areas) £40,000 - £50,000 + Van + Rapid Progression + Other great Benefits Are you a fully qualified electrician looking to step into a high-growth role with a rapidly expanding renewable energy specialist? Do you want to join an exciting, growing business that offers job & knock flexibility, investment in your development, and the chance to rapidly progress as the company scales? This ambitious renewable energy specialist focuses on domestic solar installations across Lincolnshire and the surrounding regions. Though recently established, they have grown rapidly, doubling their turnover last year and projected to double again this year. With continued exponential growth planned across the industry, they are now looking to add a skilled Solar PV Electrician to their core installation team. In this role, you will operate directly from home to site with all kit delivered straight to location, with no morning depot runs. Working mainly on domestic solar installs, you'll benefit from a great work-life balance with standard 8am to 4pm hours and a job & knock approach where finishing early means knocking off with a full day's pay. This is a fantastic opportunity for a qualified electrician with solar experience looking to build a long-term career in a high-growth company that genuinely invests in its people. The Role Solar PV electrician working on domestic installations Full electrical installation, wiring, testing, and commissioning Field-based position running directly from home to site with no depot visits required The Person Fully qualified Electrician (NVQ Level 3 or equivalent) 18th Edition and 2391 Inspection & Testing Hands-on Solar PV experience (essential) Solax, Tesla, GivEnergy, battery storage, or 3-phase system experience (desirable)Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Job Title: Electrical Supervisor Location: Lincoln, Lincolnshire Salary: £50,000 Benefits: Company vehicle, 21 days holiday + 8 days Bank Holiday A national M&E Contractor are looking for an Electrical Supervisor to join their expanding team with a strong pipeline of projects in Lincoln. The company provides M&E services to a wide range of clients and businesses across a multitude of sectors including HMP, MOD, Commercial, Education and Healthcare. These projects are typically valued up to £10M. As the Electrical Supervisor, you will report to the MEP Project Manager and will coordinate and supervise the site team to deliver the project on time and on budget. You will be overseeing progress of electrical installation works, ensuring quality control, compliance and H&S regulations. As the Electrical Supervisor you will have the following responsibilities: • Effectively manage the electrical on-site labour for the project and co-ordinate onsite sub-contractors, checking RAMs and highlighting any issues., • Hold toolbox talks with the labour team and attend site meetings., • Inspect and assess installations throughout the project and upon completion., • Diagnose and troubleshoot complex electrical issues., • Liaise with project managers to address any issues ensuring smooth project execution., • Maintain close working relationships with sub-contractors and internal teams., • Order materials and plant to ensure work can be completed., • Conduct inspection, testing, verification and certification of electrical installations., • Maintain accurate records, documentation and reports for all electrical works. Successful applicants will have the following qualifications and experience: • Overall knowledge and understanding of a wide variety of electrical systems and their installation methods., • Good communication skills and experience supervising electrical teams with strong leadership and management skills., • Good problem-solving and decision-making skills., • Experience in planning, scheduling and executing electrical projects., • The ability to work under pressure to meet set deadlines., • Valid SSSTS, Gold CSCS Skills Card or SMSTS, • Relevant electrical industry qualifications - NVQ Level 3-4, BS7671 18th Edition and ideally City & Guilds 2391 / 2394 / 2395 in Testing & Inspection., • DBS check and will be carried out on induction due to the nature of the project. Please contact Adam Brown on (phone number removed) / (phone number removed) for more information about this role or if you are interested in a new M&E Supervisor opportunity within the Building Services sector (Electrical Supervisor, Electrical Site Supervisor, M&E Supervisor, MEP Supervisor, Electrical Qualifying Supervisor, Electrical QS)

Ambitek is recruiting on behalf of our client, a well-established and respected organisation that is a trusted partner to the social housing and wider public sector. They specialise in delivering essential heating, energy efficiency and compliance solutions to thousands of homes across the UK. Due to continued growth, they are looking to recruit a qualified Electrician with experience working on domestic heating and hot water systems to join their established team. The Role As an Electrician, you will attend domestic and commercial properties throughout the Lincoln and Grantham region, carrying out electrical testing, inspection, remedial works and new heating system installations while delivering excellent customer service. This is an excellent opportunity to join a stable organisation offering long-term career progression, ongoing training and an excellent employee benefits package. Key Responsibilities Carry out Electrical Installation Condition Reports (EICRs) within domestic properties. Complete fault finding, testing and remedial electrical works. Undertake periodic testing and wiring installations for new domestic heating systems. Install and maintain electrical components associated with domestic heating and hot water systems. Work across a range of domestic and commercial properties. Ensure all work complies with current electrical regulations and company quality standards. Provide excellent customer service when working within occupied properties. Accurately complete job reports and certification using both electronic and manual systems. Comply with Health & Safety legislation, including Risk Assessments, COSHH and Safe Systems of Work. Manage stock effectively and ensure required materials are available to complete jobs. About You To be successful in this role you will have: Qualified Electrician (NVQ Level 3 or equivalent) 18th Edition Wiring Regulations Experience carrying out EICRs and remedial works Experience working on domestic heating and hot water systems Strong fault-finding and diagnostic skills Excellent communication and customer service skills • Full UK Driving Licence What's On Offer? £41,000 annual salary Permanent, full-time position Monday to Friday, 8:00am – 5:00pm (1-hour lunch) Company vehicle and fuel card Uniform and mobile device provided Ongoing training and support towards professional qualifications Enhanced annual leave based on length of service Enhanced maternity and paternity benefits Healthcare and dental cash plan Electric Vehicle Leasing Scheme If you're an experienced Electrician looking to join a respected organisation that genuinely invests in its employees, we'd love to hear from you

NDT TECHNICIAN (LPT/VT/UT/MPI) Due to ongoing and consistent global sales (20% annual headcount growth), this thriving, market leading business is looking for a NDT Technician to join their well-established Burton On Trent based team. Working a Mon–Fri week you will attract a package of up £45K plus 25 Hols + Pension + Healthcare benefits. The NDT Technician role will need a strong and confident communicator with the ability to perform LPT/VT/UT and MPI to international standards. A knowledge of the Piping materials and products used in Oil & Gas, petrochemical and nuclear industries would be advantageous as would knowledge of testing standards ASME,ASTM,ISO,API and NORSOK. This role offers the opportunity to work within one of the industry’s pioneers and the only company in the UK supplying their product globally. The Company Firmly established as a global leader this company have positioned themselves at the very forefront of their industry. Offering a great culture that rewards ambition and encourages ownership, this is an excellent opportunity to work for a company that; Have experienced a 20% annual growth in headcount at the Burton On Trent site Is an established global supplier to major oil & gas, nuclear and petrochemical companies Is the only UK based company supplying its product globally Offers clear career progression. The Role Reporting to the HSEQ Supervisor you will be part of a small specialist team, leading NDT standards throughout the company. Core duties: 1. Perform LPT to international standards/client requirements., 2. Perform VT to international standards/client requirements., 3. Perform UT to international standards/client requirements., 4. Perform MPI to international standards/client requirements., 5. Perform UT thickness testing to international standards/client requirements., 6. Perform Hardness testing to international standards/client requirements., 7. Perform Ferritescope testing international standards/client requirements., 8. Perform PMI (by XRF and OES) to international standards/client requirements., 9. Perform other NDT methods (as qualified) to international standards/client requirements., 10. Perform Final dimensional inspection to international standards/client requirements., 11. Ensuring NDT equipment is in good condition and within calibration., 12. Ensuring LPT consumables are in stock and the batches are utilised on a FIFO basis., 13. Producing in house NDT reports and ensuring compliance with the purchase order., 14. Liaise with client and third party inspectors on witness NDT activities., 15. Liaison and resolution with production over Non-conforming product., 16. Liaison with workshop supervisors on concerns and/or findings. 17 Present at daily NDT/Inspection meetings to discuss NDT concerns and findings and review the daily inspection requirements from the HSEQ Supervisor. 1. Interfacing with the commercial, technical, manufacturing and expediting departments., 2. Other duties as required by the HSEQ Management. Skills Required: 1. EN ISO 9712 PCN Level 2 (Method 22 – LPT), 2. EN ISO 9712 PCN Level 2 (Method 23 – VT), 3. Excellent written and verbal communication skills., 4. Excellent computer literacy (365 Applications) Preferred: 1. Proactive approach to learn new skills and further experience/knowledge of industry., 2. Knowledge of the piping materials and products used in the Oil & Gas, Petrochemical and Nuclear industries., 3. Knowledge of National and International testing standards, for example, ASME, ASTM, ISO, API and NORSOK., 4. Knowledge and awareness of metrology equipment., 5. Engineering background., 6. EN ISO 9712 PCN Level 2 (Method 21 – MPT), 7. EN ISO 9712 PCN Level 2 (Method 24 – UT) The Person The successful candidate will undoubtedly be a highly driven individual displaying functional excellence and a background in PCN LEVEL 2 standards and international testing standards. You will be results driven with a confident and dynamic personality. Self-motivated you will pro-actively support existing and future teams. A strong focus on business support is essential. Once again this excellent opportunity offers an opportunity to work for one of the industry’s pioneers. In return you will attract a package of up to £45K plus benefits If you wish to be considered for this exciting opportunity, please use the ‘apply now’ button or contact Jo Bailey or Jo Eley for further details. BE Engineering Ltd is a relationship driven recruiting partnership offering a confidential and personalised career service throughout the UK. We are interested to hear from high calibre professionals across all areas of engineering and manufacturing who are looking for their next progression. Our highly motivated and quality driven consultancy will work to connect you with the very best opportunities in the market. Contact us now on (phone number removed)

Electrical Project Supervisor / Electrical Qualifying Supervisor (QS) Location: Lincoln Job Type: Permanent, Full Time Start Date: ASAP ARC is recruiting for an experienced Electrical Project Supervisor / Electrical Qualifying Supervisor (QS) to join an established and reputable M&E contractor based in Lincoln. Our client is a well-established business with decades of experience delivering electrical and mechanical engineering services across commercial, industrial and public sector projects throughout the UK. They are committed to investing in their people, offering ongoing training, career progression and a supportive working environment. The Role This is a varied dual role, combining hands-on electrical site supervision with Electrical Qualifying Supervisor (QS) responsibilities. You'll play a key role in ensuring electrical works are delivered safely, efficiently and in line with current regulations and company standards. Working closely with the Project Manager, you'll oversee day-to-day site activities, coordinate labour and subcontractors, liaise with clients, and support electrical compliance, inspections and quality assurance. Responsibilities Supervise day-to-day electrical works on site Coordinate electricians, subcontractors and site activities Support the Project Manager with project delivery Ensure projects are completed safely, on time and to a high standard Carry out inspections and support quality assurance processes Ensure compliance with BS7671 and current electrical regulations Maintain strong communication with clients and the wider project team Requirements NVQ Level 3 Electrical Qualification 18th Edition (BS7671) City & Guilds 2391 (or equivalent Inspection & Testing qualification) Previous experience supervising electrical projects Experience supporting electrical compliance or QS duties SSSTS or SMSTS Gold CSCS Supervisor Card Confident using Microsoft Word, Excel and Outlook Experience managing electrical packages valued at £500k+ DBS check (enhanced clearance required – support provided) Benefits Permanent, full-time position Competitive salary (DOE) Company vehicle and fuel card 21 days annual leave plus bank holidays Ongoing training and professional development Genuine opportunities for career progression Supportive and collaborative working environment Opportunity to work on a variety of electrical projects across the region If you're an experienced Electrical Project Supervisor or Electrical Qualifying Supervisor (QS) looking for your next permanent opportunity, we'd love to hear from you. Contact John Vazquez on (phone number removed) or email for more information or to apply

GBR Recruitment are proud to be working exclusively with an experienced family-owned Electrical contractor, based in the heart of Lincolnshire who specialise in all manner of domestic & commercial electrical works. This is a great time to be joining them as they are on a growth journey, with them winning an array of new Electrical installation projects across both domestic & commercial properties. This modern Electrical solutions business is seeking an experienced Electrician to join their team on a permanent basis to cover Electrical works across predominantly Lincolnshire. Your qualifications / certifications will be fully up to date inc. ideally an NVQ Level 3, ECS card, AM2, 2391 inspection & testing, 18th Edition & with strong experience within different property types & different types of Electrical projects. As a time-served 18th Edition certified Electrician within this progressive business, you will be working on both 1st, 2nd fix & final fixings, completing the projects OTIF & to the high-quality standard expected by both the business & the customer, with a right first-time approach. You will be a customer focused Electrician who is high quality of workmanship focused. This is a very small knit team of 5, so flexibility & adaptability to tasks is a must. Electrician Attributes: • Electrician with up-to-date certifications (NVQ Level 3, ECS, AM2, 18th Edition), • Experience in domestic & commercial installations (happy to work in both), • Ability to work independently & as part of a team (lots of alone working), • Strong attention to detail & quality of workmanship focused (right 1st time), • Happy to cover Lincolnshire (15-20 miles radius of Lincoln City), • Own hand / power tools Hourly basic pay rates range from £20 - £22.50 p/h NEG DOE, with overtime paid at enhanced rates of x1.5, after 40 hours, or if working unsocial hours on certain projects (rare weekends & rare nights etc.. 98% of time would be standard Monday to Friday days). Interviews are to take place immediately, with an immediate start for the right person. Apply today

A leading construction and facilities management company is seeking a skilled Electrical Supervisor to join the Lincoln region, on a full time, permanent basis. Having been established for over 50 years they are a forward-thinking business, with an excellent reputation and a healthy pipeline of work across the healthcare sector. Responsibilities: • Manage the day-to-day performance of engineers and contractors, ensuring project targets and goals are achieved., • Oversee electrical contracts, including direct reports and subcontractors., • Ensure electrical certification is completed and processed in line with client requirements., • Monitor team productivity, resolving issues that impact performance across direct and subcontractor workstreams., • Optimise the use of labour, materials, plant, and equipment to deliver projects efficiently., • Ensure compliance with H&S regulations and site-specific requirements through audits and reporting. Requirements: • JIB Gold card or equivalent NVQ3 electrical qualifications, • Minimum 5 years’ experience in the electrical field, • C&G 2391 Inspection & Testing or equivalent qualification, • Full UK driving licence What’s on Offer: • 24 days annual leave (+ public holidays), • Life Cover equivalent to 1.5 times annual salary, • Employee discount shopping schemes on major brands and retailers, • Gym membership discounts, • Cycle to work scheme, • Holiday purchase scheme This is a permanent position, and Coleman James are acting as an Employment Agency

Example Recruitment Group is currently recruiting on behalf of a well-established national heating contractor operating within the local authority sector. They have a vacancy for a qualified electrician to cover the Lincoln area carrying out EICR’s and the wiring of central heating within domestic social housing properties. The Role: • Carrying out EICR following electrical installation assessment within properties, • Periodic testing and wiring installation of new heating systems in domestic and commercial properties, • Providing high levels of customer care when dealing with tenants and clients, • Ensure all Health & Safety requirements and legislation are followed including Risk Assessments, Safe Systems of Work, and COSHH records. Requirements: • 2 years’ experience as a qualified electrician, • Experience in wiring central heating systems., • 18th edition Qualification, • 2391 Test & Inspection or Equivalent, • Part P is desirable, • Full UK Driving Licence, • No unspent criminal convictions (DBS Check to be carried out on offer of employment) The Package: • 40 hours per week Monday to Friday, • Overtime paid at an hourly rate., • Van, tools, PPE/uniform, and PDA provided., • Salary: £40,000 per annum, • Monthly bonus, • 20 days holiday plus bank holiday (holiday entitlement increases with service), • Pension scheme, • Employee wellbeing programme, • Service level awarded annual leave, • Enhanced maternity and paternity packages, • Dental/Healthcare cash plan, • Company platform for development & career progression, • Team social activities To apply for this vacancy please use an up-to-date CV and one of our team will be in touch

Site Manager Location: Lincoln Salary: £55,000 – £75,000 per annum Contract Type: Full-Time The Opportunity We are looking for a dedicated and experienced Site Manager to take ownership of upcoming care home and healthcare construction projects in Lincoln. This is an excellent opportunity for a strong site professional who thrives in a hands-on environment and takes pride in delivering projects safely, efficiently, on schedule, and to the highest standards of quality. You will play a key role in managing day-to-day site operations, coordinating teams and subcontractors, maintaining compliance, and ensuring successful project delivery from start to finish. Key Responsibilities Take full responsibility for the day-to-day management and coordination of site operations. Ensure all works are delivered safely, efficiently, and in line with project programmes and deadlines. Supervise and coordinate site teams, subcontractors, suppliers, and other site personnel. Monitor and maintain compliance with all relevant health & safety regulations, construction standards, and quality requirements. Ensure projects remain on programme and work is delivered in accordance with predetermined schedules. Liaise professionally with clients, architects, subcontractors, suppliers, consultants, and other key stakeholders. Identify and resolve site-based issues quickly and effectively. Monitor workmanship and ensure projects are delivered to the required quality standards. Maintain accurate compliance documentation, inspection records, and site reports using the company's digital software systems. Promote a positive safety culture and ensure all site personnel follow appropriate procedures and standards. Manage multiple priorities effectively while maintaining high standards of communication and organisation. About You We are seeking a confident and proactive Site Manager with proven construction experience and the ability to take ownership of site delivery. You will ideally have: Proven experience as a Site Manager or similar position within the construction industry. Experience working on care home, healthcare, commercial, refurbishment, or similar construction projects would be highly advantageous. Strong leadership and supervisory skills with the ability to manage site teams and subcontractors effectively. Excellent communication and interpersonal skills. Strong understanding of construction processes, health & safety requirements, and quality standards. Excellent organisational skills with the ability to manage deadlines and competing priorities. A proactive approach to identifying and resolving site issues. Good computer literacy and confidence using Microsoft Word and general digital/word-processing software. The ability to work effectively under pressure while maintaining high standards of professionalism. Essential Qualifications SMSTS First Aid at Work Fire Warden GCSE or equivalent preferred. What's on Offer? £55,000 – £75,000 salary, depending on experience. 33 days annual leave, including bank holidays. Your birthday off following successful completion of your probationary period. Life insurance up to £10,000. Cycle2Work Scheme. Company pension. Employee Assistance Programme. The opportunity to play a key role in delivering meaningful healthcare and care home construction projects. The chance to make a genuine impact within a growing organisation. Important Requirement This role requires an Enhanced DBS check to be successfully completed. Ready to Make an Impact? If you are an experienced Site Manager looking for your next opportunity and want to play a key role in delivering high-quality healthcare and care home facilities, we would love to hear from you. Apply today to take the next step in your career and become an integral part of delivering projects that make a real difference to people's lives

Ambitek is recruiting on behalf of our client, a well-established and respected organisation that is a trusted partner to the social housing and wider public sector. They specialise in delivering essential heating, energy efficiency and compliance solutions to thousands of homes across the UK. Due to continued growth, they are looking to recruit a qualified Electrician with experience working on domestic heating and hot water systems to join their established team. The Role As an Electrician, you will attend domestic and commercial properties throughout the Lincoln and Grantham region, carrying out electrical testing, inspection, remedial works and new heating system installations while delivering excellent customer service. This is an excellent opportunity to join a stable organisation offering long-term career progression, ongoing training and an excellent employee benefits package. Key Responsibilities Carry out Electrical Installation Condition Reports (EICRs) within domestic properties. Complete fault finding, testing and remedial electrical works. Undertake periodic testing and wiring installations for new domestic heating systems. Install and maintain electrical components associated with domestic heating and hot water systems. Work across a range of domestic and commercial properties. Ensure all work complies with current electrical regulations and company quality standards. Provide excellent customer service when working within occupied properties. Accurately complete job reports and certification using both electronic and manual systems. Comply with Health & Safety legislation, including Risk Assessments, COSHH and Safe Systems of Work. Manage stock effectively and ensure required materials are available to complete jobs. About You To be successful in this role you will have: Qualified Electrician (NVQ Level 3 or equivalent) 18th Edition Wiring Regulations Experience carrying out EICRs and remedial works Experience working on domestic heating and hot water systems Strong fault-finding and diagnostic skills Excellent communication and customer service skills • Full UK Driving Licence What's On Offer? £41,000 annual salary Permanent, full-time position Monday to Friday, 8:00am – 5:00pm (1-hour lunch) Company vehicle and fuel card Uniform and mobile device provided Ongoing training and support towards professional qualifications Enhanced annual leave based on length of service Enhanced maternity and paternity benefits Healthcare and dental cash plan Electric Vehicle Leasing Scheme If you're an experienced Electrician looking to join a respected organisation that genuinely invests in its employees, we'd love to hear from you

NPP are looking to recruit a CSCS, SMSTS Site Manager with experiience of roofing streams on social housing contracts in the Licoln and surrounding areas The Site Manager is responsible for the daily on-site operational delivery, health and safety, and quality control of roofing replacement and refurbishment schemes within occupied and unoccupied social housing properties. Reporting directly to a Contracts Manager, they act as the principal point of contact for local authority clients, sub-contractors, and residents to ensure projects finish safely, on time, and within budget. Key Responsibilities Operational & Programme Delivery • Manage the full lifecycle of roofing projects from initial site mobilisation through to final handover and client sign-off., • Coordinate day-to-day site logistics, including the delivery, storage, and distribution of roofing materials and plant equipment., • Monitor project timelines against the master programme, proactively resolving any delays or multi-trade bottlenecks on site., • Oversee diverse technical scopes, including pitched roof replacements (slate, tile), flat roof systems, fascias, soffits, and thermal insulation upgrades Health, Safety, & Compliance • Enforce a strict "Safety First" culture on site, conducting mandatory site inductions and regular toolbox talks., • Ensure total alignment with current health and safety legislation, Risk Assessments, and Method Statements (RAMS)., • Coordinate temporary works, focusing closely on complex scaffold erection, edge protection, and scaffold inspection compliance., • Maintain accurate digital records using management platforms Subcontractor & Quality Management • Direct, supervise, and inspect the output of specialist roofing, scaffolding, and solar installer subcontractors., • Conduct rigorous quality control checks at every stage, ensuring all installations align perfectly with design specifications and manufacturer warranties., • Adhere strictly to Building Safety standards. Tenant & Stakeholder Relations • Act as the professional, client-facing representative for the principal contractor on site., • Liaise directly with Tenant Liaison Officers (TLOs) to keep residents informed, manage access schedules, and resolve complaints swiftly., • Minimise day-to-day disruption to vulnerable residents living within live project zones. Essential Qualifications • SMSTS (Site Management Safety Training Scheme) certification., • Valid CSCS Card (Black Manager or Gold Supervisor level)., • First Aid at Work (3-day valid certificate)., • Asbestos Awareness training., • Full, clean UK Driving Licence. [1, 3, 4, 5] Desirable Certifications • Scaffold Inspection certificate., • Temporary Works Supervisor qualification., • Fire Marshall or trade-specific fire safety accreditations (e.g., FIRAS or BM TRADA). Experience & Knowledge • Experience specifically working within social housing planned maintenance or refurbishment frameworks., • Strong technical literacy across pitched roofing, concrete tile systems, and flat roof liquid waterproofing., • Proven track record of managing construction teams within occupied residential spaces. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed

Key Responsibilities * Lead the final inspection team, ensuring inspection activities are completed efficiently and in line with required quality standards. Support root cause investigations and implement corrective actions relating to inspection activities. We are working with a leading global man

Due to continued expansion, they are seeking an Inspection and Testing Engineer with a Mechanical Engineering background to join their busy Construction team. This role offers an excellent opportunity for an experienced Engineer to join a growing and ambitious business, working closely with Project

Are you an Industrial Electrician with Testing & Inspection experience? Do you hold your 18th Edition and 2391 (or equivalent) qualifications? Are you looking to join a growing business where you'll work on a variety of industrial installations and inspection projects across the North East?. Ind

Are you an Industrial Electrician with Testing & Inspection experience? Do you hold your 18th Edition and 2391 (or equivalent) qualifications? Are you looking to join a growing business where you'll work on a variety of industrial installations and inspection projects across the North East? Thi

HGV Vehicle Inspection Engineer Location: Field based role – Positions available across the countrySalary: up to £30,000 - £38,212. DOEContract: Full time, Permanent (Part Time availability dependent upon area) Do you want to boost the future towards a safe, secure and sustainabl

Inspection Assembly & Packaging Operations Manager. You will lead inspection, assembly and packaging operations at a GSK site in the United Kingdom. Lead and coordinate inspection, assembly and packaging operations to meet safety, quality, schedule and cost targets.

The ideal candidate for an Electrical Test & Inspection Engineer at phs Compliance will have:. Compliance supports over 2,000 UK and Irish businesses with testing, installation and management of their property infrastructure assets, delivering electrical test and inspection, M&E installation and mai

We're supporting a leading aerospace engineering business in the search for a Head of Inspection (NDT) & Maintenance Manager to lead inspection operations, oversee Part 145 maintenance activities, and drive the growth of a highly respected inspection services function. As Head of Inspection, you'll

Job Description Metrology Engineer - Dimensional Inspection Want to apply Read all the information about this position below, then hit the apply button.

A technology and digital transformation company is seeking an Inspection & Test Engineer in Staffordshire, UK.

You will lead industrial inspection services sales, focusing on new logo clients and project-based opportunities, from initial contact to contract award. We require a proven track record in technical B2B sales within pressure vessels, PED, PSSR or related inspections.

Speedy Hire Plc is seeking an Inspection Engineer to join our Erith, London team, working 39 hours per week, Monday to Friday. The role involves lifting equipment inspection, load testing and related tasks, with clear pathways for training and progression.

A leading estate agency in Essex is seeking a Property Inspection Manager. This full-time role involves conducting property inspections, managing deposit negotiations, and ensuring compliance with legal standards.

As Highway Inspection Team Manager, you will lead the day-to-day management of the inspection team, ensuring inspections are undertaken in line with statutory requirements and industry standards. Highway Inspection Team Manager. Lead and develop a high-performing team delivering statutory highway in

Come and join one of the leading and growing, global inspection and risk businesses. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. Due to expansion in our our si