Inspection jobs in ColchesterCreate job alerts

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the South East: Brighton Esher Guildford High Wycombe Horsham Maidenhead Milton Keynes Oxford Newbury Reading Slough A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the South East: Brighton Esher Guildford High Wycombe Horsham Maidenhead Milton Keynes Oxford Newbury Reading Slough A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the South East: Brighton Esher Guildford High Wycombe Horsham Maidenhead Milton Keynes Oxford Newbury Reading Slough A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,170, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Where you’ll work You’ll be part of the Chelmsford cluster, covering areas like Chelmsford, Brentwood, Basildon, Southend‑on‑Sea, Grays, Tilbury, Thurrock, Maldon, Braintree, Canvey Island, Rayleigh. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need... Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Plant Inspector Colchester £40,(Apply online only) - £45,(Apply online only) + Company Van + Overtime + Industry Qualifications + Progression The Opportunity NEOS Engineering Recruitment are partnered with a leading organisation within the Heavy Plant industry who are looking to appoint a Plant Inspector to join their growing team. This is a fantastic opportunity for a Heavy Plant Engineer looking to get off the tools, or an existing Inspector looking to join a business that genuinely invests in its people. Full training will be provided, including LOLER, LEEA and other recognised inspection qualifications, allowing you to develop into a highly skilled specialist within the industry. If you're looking for a business that values development, offers long-term progression and provides the tools to become one of the best in the industry, this is the role for you. The Role As a Plant Inspector, you'll be responsible for inspecting a wide range of heavy plant and lifting equipment, ensuring machinery meets the highest standards of safety and compliance. You'll produce detailed inspection reports, identify defects and work closely with customers to ensure equipment remains safe, compliant and operational. The Candidate We're looking for someone who has: Experience working on Heavy Plant, Construction Equipment or similar machinery Strong mechanical and hydraulic knowledge Excellent attention to detail A positive attitude and willingness to learn A full UK Driving Licence Inspection experience isn't essential — if you're an experienced engineer looking for a new challenge, full training will be provided. What's in it for You? £40,(Apply online only) - £45,(Apply online only) Basic Salary Company Van Overtime Available Fully Funded LOLER, LEEA & Industry Qualifications Ongoing Training & Development Excellent Career Progression Pension Join a growing business with a fantastic reputation If you're ready to build a long-term career with an employer who invests in your future, we'd love to hear from you. Apply today or contact NEOS Engineering Recruitment for a confidential conversation

Senior Electrical Technical Supervisor x3 (Permanent)Our client is seeking three experienced Senior Electrical Technical Supervisors to join their growing team. Based primarily in Essex, the role may also involve travel across London and Suffolk.The business delivers major electrical infrastructure and industrial projects including:LV InfrastructureTransformer InstallationsGenerator InstallationsLV & HV Panel InstallationsFeeder PillarsLimited Associated Civil WorksPlease note: No domestic or housing sector work is undertaken.The RoleYou will oversee electrical installation, maintenance, testing and commissioning activities across commercial and industrial projects, ensuring work is completed safely, on time, within budget and in compliance with UK regulations and company standards.Key ResponsibilitiesSupervise electricians, apprentices and subcontractorsAllocate work, monitor productivity and conduct toolbox talksEnsure compliance with Electricity at Work Regulations, Health & Safety legislation and BS7671Prepare and review RAMS and monitor safe working practicesInterpret technical drawings and specificationsInspect installations, support testing and commissioning activitiesIdentify and resolve technical issuesLiaise with clients, engineers, suppliers and site teamsManage materials, resources and project documentationAttend site meetings and provide project updatesCarry out quality inspections, snagging and compliance checksMaintain certification and installation recordsEssential Skills & ExperienceProven experience as an Electrician, Electrical Supervisor or Senior Electrical SupervisorStrong knowledge of UK electrical regulations and standardsExperience leading teams and coordinating workloadsAbility to read technical drawings and specificationsExcellent communication, leadership and problem-solving skillsDesirable ExperienceTransformers, generators, LV/HV switchgear and feeder pillarsIndustrial, utilities or infrastructure projectsQualificationsNVQ Level 3 Electrical Installation18th Edition Wiring RegulationsECS or CSCS Card2391 Inspection & Testing (preferred)SSSTS or SMSTS (desirable)Apply TodayIf you're an experienced electrical professional looking to play a key role in delivering major infrastructure projects across the South East, we'd love to hear from you.TPBN1_UKTJ

Electrical Qualified Supervisor Colchester £58,000 - £65,000 + Progression to Technical Director + Autonomy + Renewable Energy + Growing Company + Immediate Start Are you an experienced Electrical Qualified Supervisor looking for a role where you'll have genuine autonomy and the opportunity to shape the future of a growing business? This is an exciting opportunity to join a rapidly expanding electrical contractor where your technical expertise will be valued from day one. As the company continues to grow, you'll play a pivotal role in developing compliance standards, supporting engineers and driving operational excellence, with genuine progression opportunities into senior management or Technical Director level. As an Electrical Qualified Supervisor you'll be joining an established electrical contractor delivering high-quality commercial, residential and renewable energy installations across the South East. Having built an excellent reputation through the quality of their workmanship and customer service, they continue to grow year on year whilst maintaining a close-knit, supportive culture. With ambitious plans to expand their renewable energy division, achieve further industry accreditations and continue developing their technical team, this is an excellent opportunity for an Electrical Qualified Supervisor who wants to make a genuine impact within a business where their knowledge and experience will be recognised. As an Electrical Qualified Supervisor, your responsibilities will include: Acting as the company's Qualified Supervisor, ensuring all electrical work complies with current regulations, certification standards and MCS requirements Signing off electrical installations whilst overseeing testing, inspection, certification and technical compliance across commercial and residential projects Providing technical support, mentoring electricians and driving quality standards throughout the business Developing compliance procedures, improving operational processes and supporting the company's continued growth The successful Electrical Qualified Supervisor should have: Previous experience as an Electrical Qualified Supervisor, Electrical Compliance Manager or similar position NVQ Level 3 in Electrical Installation, 18th Edition and 2391 Inspection & Testing Strong knowledge of electrical compliance, testing, inspection, certification and current wiring regulations Solar PV experience is advantageous but not essential Please apply to Harley Reynolds at Accelerated People Management. Keywords: Electrical Qualified Supervisor, Qualified Supervisor, Electrical QS, Electrical Compliance Manager, Electrical Supervisor, Electrical Manager, Senior Electrician, Compliance Engineer, Testing and Inspection Engineer, Electrical Engineer, Electrical Installation, Electrical Compliance, Testing & Inspection, 2391, NVQ Level 3, 18th Edition, Amendment 2, MCS, Solar PV, Renewable Energy, Commercial Electrician, Residential Electrician, Electrical Certification, Commercial Electrical, Residential Electrical, Colchester, Essex, Chelmsford, Braintree, Witham, Ipswich, Clacton-on-Sea, Sudbury, Maldon This vacancy is being advertised by Accelerated People Management Ltd. The services of Accelerated People Management Ltd are that of an Employment Agency. Accelerated People Management Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted

Moq)Good understanding of software development using TDDStrong numerical skillsExperience designing/developing software architecturesExperience with control software for hardware systems and/or building simulatorsDesirable Skills:Understanding of X-Ray inspection and materials testing. Nordson Test

Section Engineer - Highways & Infrastructure - Colchester Location: Colchester, Essex Working pattern: Site-based Salary/Rate: Dependent on experience Sector: Highways / Civil Engineering / Infrastructure Are you an experienced Section Engineer looking to take responsibility for a key section of a major highways scheme? This is an opportunity to work on a substantial roundabout project in Colchester, taking ownership of setting out, quality, engineering delivery and the coordination of works on site. You will be joining an established civil engineering contractor delivering infrastructure projects across the Eastern region. You will have the opportunity to work on technically interesting schemes, develop your engineering experience and take greater responsibility for project delivery. My client is a well-established civil engineering contractor with a strong presence across highways and infrastructure. The business delivers complex civil engineering projects and places a strong emphasis on quality, safety, technical standards and developing its engineering teams. As the Section Engineer, you will play an important part in progressing the construction programme and ensuring your section of works is delivered safely, accurately and in accordance with the required design and specification. You will be: ·Managing the setting out requirements for your section of the project. ·Carrying out inspections and testing to ensure works comply with the design, specification and quality requirements. ·Liaising with site management and completing quality take-offs. ·Preparing and contributing to hazard assessments, risk assessments and method statements. ·Identifying potential commercial opportunities or issues associated with your section of works. ·Managing sectional service plans and drawings and issuing relevant permits. ·Supporting and mentoring Junior Engineers on site. ·Working with the Quantity Surveyor and Project Manager to provide information for project records and claims. ·Managing as-built information for your section and contributing to completion of the project health and safety file. ·Ensuring your works comply with the required quality, health and safety and environmental procedures. ·Transferring engineering information from AutoCAD into surveying equipment and using site surveying technology effectively. To be considered for this Section Engineer opportunity, you will need: ·Strong setting out experience gained on civil engineering or infrastructure projects. ·Experience working on highways, roads and/or earthworks schemes. ·Experience using Leica and/or GeoMax surveying equipment. ·The ability to transfer information from AutoCAD to surveying equipment. ·A good understanding of Inspection and Test Plans (ITPs) and quality assurance processes. ·A sound understanding of construction methods and site engineering practices. ·The ability to coordinate your own section of works and support other members of the engineering team. ·A full UK driving licence due to the site-based nature of the position and potential travel across the Eastern region. A First Aid at Work qualification would be advantageous but is not essential. The Section Engineer salary/rate is dependent on experience, with the overall package reflecting your technical background and suitability for the position. Depending on the employment arrangement, the wider package may include: ·Company car or car allowance. ·Company pension scheme. ·Life assurance. ·25 days' annual leave plus bank holidays. ·Training and professional development opportunities. ·Employee Assistance Programme. ·Cycle-to-work scheme. ·Employee benefits platform. ·On-site parking. ·Opportunities to progress your career within a growing civil engineering business. This is a site-based position in Colchester, working on a major roundabout and highways infrastructure scheme. You will be joining a project where you can take genuine responsibility for delivery while continuing to develop your technical and management experience. If you are a Section Engineer with strong highways, earthworks or infrastructure setting out experience and are looking for your next opportunity in the Colchester area, apply today with your latest CV or contact Carrington West for a confidential discussion. FOOTNOTE: If you feel that you are right for this role technically, but the salary, location or seniority does not suit you specifically then please still feel free to send us your CV. We constantly recruit for roles very similar to this one at all levels UK Wide. We are always keen to chat with you discreetly about your employment situation. Even if you are happy in your current role for now, we always welcome calls from Highways professionals keen to make their introductions for future months or years. Carrington West's Highways, Transport & Infrastructure division is the fastest growing in the country, our specialist team has a combined over 100+ years' experience in this market. Please call Jordan Townley at Carrington West on 023 9431 4917 or email Jordan.townley@carringtonwest.com for more information. By applying for this position, you are agreeing for Carrington West to hold and process your personal data in accordance with our Data Protection Policy. Your data will be shared with third-party clients specifically relevant to any roles you have applied for. If at any stage, you wish to withdraw your consent please contact us.Discipline(s): Highways, Transport & InfrastructureJob type: Permanent - Full Time

Fire Risk AssessorCobalt is recruiting a Fire Risk Assessor for an established property management organisation with a residential portfolio. This is a full-time, field-based opportunity involving regular portfolio travel and genuine ownership of technical fire-safety decisions.The successful Fire Risk Assessor will join an organisation that places emphasis on evidence-led decision-making, technical independence and proportionate risk management.The organisationOur client manages a residential property portfolio and takes a structured approach to fire safety, with an emphasis on clear technical judgement and accountable decision-making.You will have the opportunity to work independently while collaborating with property managers, contractors and colleagues. The position also provides scope to contribute to peer review, coaching and improvements to wider fire-safety standards.The role and responsibilitiesAs Fire Risk Assessor, you will report to a senior risk lead and take responsibility for delivering proportionate and defensible fire risk assessments across purpose-built residential and relevant mixed-use buildings.Your key responsibilities will include: Planning and completing fire risk assessments, considering building context, occupancy, means of escape and existing fire strategies. Identifying fire-safety findings and translating these into clear risk judgements and proportionate actions. Assessing incomplete or conflicting information, recording limitations and identifying where further investigation or interim controls are required. Producing clear reports with traceable evidence, priorities, timescales, accountable actions and defined closure standards. Reviewing evidence relating to fire doors, compartmentation, alarms and smoke control within your professional competence, referring specialist matters where appropriate. Reviewing contractor evidence before material fire-safety actions are closed. Communicating findings clearly to property managers, residents, contractors and colleagues. Completing quality assurance and contributing to peer review, coaching and improvements to fire-safety standards.The Fire Risk Assessor will be trusted to maintain independent professional judgement and ensure technical findings remain evidence-led.The skills needed and requirementsTo be considered for this Fire Risk Assessor opportunity, you will need: Current registration on the IFSM National Fire Risk Assessors Register at Intermediate Level - Tier 2 or above. An ABBE Level 3 Award in Fire Door Inspection. Strong working knowledge of practical fire risk assessment within purpose-built residential buildings. Working knowledge of means of escape, fire doors, passive fire protection, alarms and smoke-control arrangements within the appropriate limits of competence. Experience producing evidence-led assessments independently and communicating the scope and outcomes of your work. Experience reviewing incomplete information, contractor remediation records and evidence used to close fire-safety actions. The ability to recognise when specialist fire-engineering, structural or other technical input is required. A full UK driving licence and the ability to travel independently across the portfolio.Both the specified IFSM registration and ABBE qualification are mandatory for this appointment, so applications without these credentials cannot progress.If you are a Fire Risk Assessor looking for a position where technical judgement, evidence quality and professional independence are valued, apply now. Interviews are expected to progress promptly.Due to the volume of applications received, if you don't hear back from us, please assume your application has been unsuccessful on this occasion.If you require any adjustments or additional support during the recruitment process for any reason whatsoever, please let your Cobalt consultant know.TPBN1_UKTJ

About You:We are seeking someone willing to learn. You will independently assess the quantity and quality of materials including Crude Oil, Petroleum Products, Petrochemicals and Petroleum Gases. You will perform cargo sampling and take measurements to complete calculations for accurate reporting to the client.Key Requirements:Previous experience in the petrochemical/Inspection industry is beneficial but not requiredHold a valid driving licenseWilling to work unsociable and unpredictable hoursBe comfortable with the physical demands of the roleAble to work with limited supervisionHave good problem-solving and organisational skillsAbility to gain knowledge of relevant standards and perform the practical aspects of the jobGood communication skillsBe computer literate and numerateAbout The Opportunity:The role of an Inspector with Intertek is to perform volume/temperature measurements, sampling, calculations, and reporting to ensure that the customer receives an independent, accurate, and complete assessment of the quantity and quality of materials during transportation. Materials can include Crude Oil, Petroleum Products, Petrochemicals and Petroleum Gases.Key ActivitiesEnsuring all work carried out in the operation follows the agreed procedures as set out in the generic Management system and relevant local Inspection management system documentsPerforming by specified methodology; visual observation, volume measurement, temperature measurement, and sampling of commodity materials contained or conveyed in lines, barge tanks, ship tanks, rail tanks, shore tanks, and other vesselsAttending commodity material movements involving line and tank transfer or displacement, lightning, and loading and unloadingCommunicate and coordinate with terminal, transport, and company personnel to promote the smooth exercise of duties assignedMonitoring the availability of the supplies needed for the above processes, and making any needs for such supplies known to the Operations ManagerOrganising and coordinating jobs so that services are rendered, and reports and samples are submitted, on timeVerifying and communicating the results obtained, and making the entries into the appropriate media, whether print or electronic, is required to ensure the validity and traceability of the informationWhat We Offer:Join Intertek and become part of our global network of inspiring and entrepreneurial colleagues. We are a global family that values diversity and we thrive working together with precision, pace and passion. We are working to make the world Ever Better, ensuring the quality, safety and sustainability of products and services used by millions of people around the world.Competitive salary/benefitsDevelopment and career opportunities around the GlobeWorking in a highly motivated team and a dynamic working environmentWe are an Equal Opportunity Employer that do not discriminate against applicants. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex or national origin.Intertek operates a preferred supplier arrangement and we do not accept unsolicited approaches from agencies.TPBN1_UKTJ

About UsCahill Corporation Ltd T/A Cahill Renewables is a rapidly growing renewable energy company based in Colchester, specialising in the design and installation of Solar PV, Battery Storage and Renewable Energy systems across domestic, social housing and commercial sectors.Due to continued expansion, we are looking for an experienced Solar PV Electrician to join our installation team.The RoleThe successful candidate will be responsible for carrying out Solar PV and Battery Storage installations, electrical testing, commissioning, fault finding and maintenance works across a variety of projects.You will be required to report to our Colchester yard each morning to collect equipment and materials before travelling to site.RequirementsMinimum 1 years' experience working within the Solar PV industryNVQ Level 3 in Electrical Installation18th Edition Wiring RegulationsECS Gold Card (preferred but not essential)AM2 qualification (or working towards)Full UK Driving LicenceStrong understanding of Solar PV systems and associated electrical worksAbility to work independently and as part of a teamExcellent attention to detail and commitment to high-quality workmanshipSolar PV Installation qualification (preferred but not essential)Battery Storage installation experience (preferred but not essential)Testing & Inspection qualifications (2391 or equivalent)(preferred but not essential)Experience with major inverter and battery manufacturers such as Fox ESS, Sigenergy, Tesla and SolarEdge is an advantagWhat We OfferSalary of £45,000 - £55,000 per annum basic + overtime depending on experienceCompany vanFuel cardCompany pension scheme28 days holiday including bank holidaysCompany uniform and PPEOngoing training and development opportunitiesOpportunity to join a growing business with long-term career prospectsLocation RequirementApplicants must live close to Colchester, as daily attendance at our Colchester yard is required.DBS Check and H&S Training required to be carried out before starting due to contract requirementsTPBN1_UKTJ

Class 2A–2F Registered Building Inspector Location: EssexWorking: HybridRate: £75 per hourIR35: Inside IR35Contract: Interim | 3 days per weekPanoramic Associates is working with a Local Authority in Essex that is looking for an experienced Registered Building Inspector to join their Building Control team on an interim basis.This role is for a Class 2A–2F who can step into a busy Local Authority environment and take ownership of a broad range of building control work. You'll be trusted to make sound technical decisions, deal confidently with complex applications and inspections, and provide clear advice to applicants, contractors and internal stakeholders.What you'll be doing Enforce the Building Regulations, Building Act and associated legislation across a range of projects, including complex developments.Examine and assess Building Regulation applications, negotiating with applicants to identify compliant solutions where appropriate.Authorise the approval or rejection of plans and applications within statutory timescales and prepare the relevant decision notices.Undertake statutory and non-statutory site inspections, making informed decisions on site and providing clear instructions where necessary.Maintain accurate and comprehensive inspection and enforcement records.Investigate complaints and breaches of Building Regulations and initiate appropriate enforcement action.Prepare reports, evidence and documentation to support legal proceedings where required.Work alongside the Council's legal team and attend court as an expert witness when necessary.Provide professional and technical advice to applicants, contractors and other stakeholders.Support the Building Control Manager in maintaining a high-quality, customer-focused Building Control service.You'll need strong technical knowledge, sound judgement and the confidence to deal with complex applications, site issues and enforcement matters independently.Interested? If you're a Class 2A–2F Registered Building Inspector and you're open to a part-time interim assignment in Essex, I'd be happy to have a confidential conversation and talk you through the role, team and wider requirements.TPBN1_UKTJ

Plant Inspector Colchester £40,000 - £45,000 + Company Van + Overtime + Industry Qualifications + Progression The Opportunity NEOS Engineering Recruitment are partnered with a leading organisation within the Heavy Plant industry who are looking to appoint a Plant Inspector to join their growing team. This is a fantastic opportunity for a Heavy Plant Engineer looking to get off the tools, or an existing Inspector looking to join a business that genuinely invests in its people. Full training will be provided, including LOLER, LEEA and other recognised inspection qualifications , allowing you to develop into a highly skilled specialist within the industry. If you're looking for a business that values development, offers long-term progression and provides the tools to become one of the best in the industry, this is the role for you. The Role As a Plant Inspector, you'll be responsible for inspecting a wide range of heavy plant and lifting equipment, ensuring machinery meets the highest standards of safety and compliance. You'll produce detailed inspection reports, identify defects and work closely with customers to ensure equipment remains safe, compliant and operational. The Candidate We're looking for someone who has: Experience working on Heavy Plant, Construction Equipment or similar machinery Strong mechanical and hydraulic knowledge Excellent attention to detail A positive attitude and willingness to learn A full UK Driving Licence Inspection experience isn't essential — if you're an experienced engineer looking for a new challenge, full training will be provided. What's in it for You? £40,000 - £45,000 Basic Salary Company Van Overtime Available Fully Funded LOLER, LEEA & Industry Qualifications Ongoing Training & Development Excellent Career Progression Pension Join a growing business with a fantastic reputation If you're ready to build a long-term career with an employer who invests in your future, we'd love to hear from you. Apply today or contact NEOS Engineering Recruitment for a confidential conversation. TPBN1_UKTJ

Colchester Borough Council is seeking a Food and Safety Manager in Colchester. You will lead the Food & Safety Team, ensuring enforcement and inspection duties meet statutory requirements and Council policy, and contribute to the authority's strategic objectives.

Class 2A–2F Registered Building Inspector Location: Essex Working: Hybrid Rate: £75 per hour IR35: Inside IR35 Contract: Interim | 3 days per week Panoramic Associates is working with a Local Authority in Essex that is looking for an experienced Registered Building Inspector to join their Building Control team on an interim basis. This role is for a Class 2A–2F who can step into a busy Local Authority environment and take ownership of a broad range of building control work. You’ll be trusted to make sound technical decisions, deal confidently with complex applications and inspections, and provide clear advice to applicants, contractors and internal stakeholders. What you'll be doing Enforce the Building Regulations, Building Act and associated legislation across a range of projects, including complex developments. Examine and assess Building Regulation applications, negotiating with applicants to identify compliant solutions where appropriate. Authorise the approval or rejection of plans and applications within statutory timescales and prepare the relevant decision notices. Undertake statutory and non-statutory site inspections, making informed decisions on site and providing clear instructions where necessary. Maintain accurate and comprehensive inspection and enforcement records. Investigate complaints and breaches of Building Regulations and initiate appropriate enforcement action. Prepare reports, evidence and documentation to support legal proceedings where required. Work alongside the Council’s legal team and attend court as an expert witness when necessary. Provide professional and technical advice to applicants, contractors and other stakeholders. Support the Building Control Manager in maintaining a high-quality, customer-focused Building Control service. You’ll need strong technical knowledge, sound judgement and the confidence to deal with complex applications, site issues and enforcement matters independently. Interested? If you're a Class 2A–2F Registered Building Inspector and you're open to a part-time interim assignment in Essex, I’d be happy to have a confidential conversation and talk you through the role, team and wider requirements...

Domestic Electric Vehicle Charging Point maintenance Domestic EV maintenance Electrician Essex Exciting opportunity for you to broaden your skills and contribute to the green revolution. This is the perfect time to make the move into this forward thinking and fast-growing sector of the Electrical industry. We are working with the industry leader, with a vision to change the way people drive. They have made it their mission to install a charging point everywhere you park. To make that vision a reality we need the best talent in the industry - a vision Search Energy are proud to support. You will be responsible for maintaining the network of EV Charging Points, in a localised area, while representing the company in a professional manner. Customer engagement and service are as important in this role as the technical skills to maintain and fix the installations. A keen attention and focus on Health and Safety is also paramount for our installers. What's in it for you? - Competitive basic salary of £37,300 - OTE £50,000+ - Annual £2000 bonus - Overtime available - Company hire van and fuel card - 21 days annual leave plus 8 Bank Holiday days - Employee Enhanced Benefits package EV Salary Sacrifice Car scheme Retail / Health / Gym and other services and discounts Help @ Hand Employee Assistance Programme - Wellbeing services and benefits - Workplace pension - Full time employment What we are looking for in a candidate: - Be fully competent with completing electrical certificates using digital software - An understanding of the current regulations and a focus to always remain compliant - Able to follow safe working procedures. - Excellent customer services skills, with a friendly manner and effective communication skills. It is essential that the candidate has the following skills: - Level 3 electrical installations qualification - Installation and termination of SWA cable - BS 7671 :2018, 18th edition - Minimum of 2 years Electrical Experience in domestic environment - Full UK Driving Licence Ideally you will have: -Experience of 3 phase initial verification, inspection and testing - City and Guilds EV installation 2919 or equivalent. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

PSR Solutions are working with a Highways Contractor who are looking to recruit for Site Engineers and Senior Engineers in Essex. Please see more info below. Senior Engineer - Highways & Infrastructure Location: Essex The Role An exciting opportunity has arisen for an experienced Senior Engineer to join a leading civil engineering contractor delivering highways and infrastructure projects across Essex. Working closely with Project Managers, Site Agents, and delivery teams, you will play a key role in ensuring projects are delivered safely, on time, within budget, and to the highest quality standards. The successful candidate will provide technical leadership on site, oversee setting out activities, manage engineering teams, and ensure compliance with project specifications and industry regulations. Key Responsibilities Engineering & Site Delivery Manage and oversee all setting out and surveying activities. Ensure works are delivered in accordance with design drawings, specifications, and project requirements. Review technical information and resolve engineering issues on site. Support Project Managers and Site Agents with programme delivery and construction planning. Supervise Site Engineers and provide mentoring and technical guidance. Coordinate subcontractors and site teams to ensure efficient project delivery. Monitor progress against programme and identify risks, delays, and solutions. Quality Management Prepare and implement Inspection & Test Plans (ITPs). Ensure quality assurance procedures are followed throughout project delivery. Carry out quality inspections and maintain accurate records. Manage as-built drawings and handover documentation. Close out technical queries and non-conformances promptly. Health, Safety & Environment Promote a positive health, safety, and environmental culture on site. Ensure compliance with CDM regulations, project procedures, and industry standards. Assist with risk assessments, method statements, and permit systems. Conduct site inspections, toolbox talks, and safety briefings. Stakeholder Management Liaise with clients, local authorities, utility providers, subcontractors, and design consultants. Attend progress meetings and provide technical updates. Build and maintain strong working relationships with all project stakeholders. About You Essential Experience as a Senior Engineer within civil engineering, highways, or infrastructure projects. Strong knowledge of highways construction, roads, drainage, earthworks, and S278 works. Experience managing setting out and surveying activities. Ability to interpret technical drawings and specifications. Degree/HNC in Civil Engineering or equivalent. CSCS Card. SMSTS or SSSTS qualification. Proficiency in AutoCAD and surveying equipment. Strong communication, leadership, and problem-solving skills. Desirable Experience working on local authority or National Highways projects. Temporary Works Coordinator qualification. Knowledge of NEC contracts. Chartered status or working towards professional accreditation (ICE). Benefits Competitive salary and benefits package. Company vehicle or car allowance. Pension and life assurance. Ongoing training and professional development. Clear opportunities for career progression. Exposure to a diverse portfolio of highways and infrastructure projects across Essex.Contact DanConfrey atPSR for more info

Electrician £40,000 - £45,000 Covering predominately Essex, occasionally covering parts of London and Kent An exciting opportunity with a company who has experienced record growth over the past few years, with ambitious directors that look to grow the company further and take their engineers on the journey with them. Our client is the chosen facilities maintenance provider to a variety of public sector, commercial and industrial contracts. The chosen engineer will be looking after sites in Luton and the surrounding areas conducting service, maintenance, remedials, testing and small installations. With majority of their management team progressing up from an engineer level, the company has a proven track record of investing their engineers and promoting within. Job Description PPM, service/maintenance works and remedials Small installations Sockets, wiring, lighting, power Testing works Covering a variety of contracts like schools, public sector and offices Requirements Ideally 3/4 years in a similar role 18th edition 2391 Test and inspection (Advantageous) NVQ/C&G Level 3 (Preferred) Am2 (Advantageous) Benefits Company vehicle Life insurances Career progression OT rates ranging from 1.5x - 2x If you are interested in this role or looking for something similar, please contact our Consultant Max Hooper directly at or call them for a confidential discussion on (phone number removed) or (url removed) INDSNS If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Quality Inspector – Romer Arm / CMM (Dimensional Measurement) Key Details: • Job Type / Contract: Temporary Contract (3-4 Weeks, potential for extension), • Location: Colchester, Essex, • Category: Engineering / Quality / Manufacturing, • Salary / Pay Rate: £20.00 – £24.00 per hour (Guide rate, competitive and dependent on experience), • Shift / Hours: Monday to Friday, 7:00am – 3:30pm About the Role All Square Recruitment is excited to partner with a reputable engineering client based in Colchester, Essex, to recruit an experienced Quality Inspector for a short-term contract assignment. This is a fantastic opportunity for a detail-oriented metrology professional to provide dimensional measurement support using Romer Arm and CMM equipment, working within a structured quality environment on a well-established manufacturing site. Key Responsibilities • Interpret engineering drawings accurately, including dimensions, tolerances, units, revisions, notes, and title blocks., • Apply general tolerancing principles, correctly distinguishing between drawing-wide and individually toleranced dimensions., • Demonstrate a working understanding of GD&T, including flatness, straightness, parallelism, perpendicularity, position, profile, and datums., • Carry out precise external, internal, step, and depth measurements using vernier and digital callipers., • Set up and operate a Romer Arm with AS1 scanner, including referencing, probing/scanning, alignment, feature construction, and reporting., • Prepare surfaces and apply correct scanning technique to ensure full coverage and recognise poor-quality point-cloud data., • Maintain accurate inspection records, capturing measured values, equipment ID, drawing revision, and acceptance status., • Check equipment calibration status prior to use and follow correct procedures for overdue or damaged equipment., • Identify and quarantine nonconforming product, raising Non-Conformance Reports (NCRs) rather than independently accepting deviations. Candidate Requirements & Qualifications • Previous experience in a dimensional inspection, metrology, or quality control role is essential., • Proven ability to read and interpret engineering drawings, including GD&T symbols and tolerancing., • Hands-on experience using a Romer Arm (or similar portable CMM/scanning arm) is highly desirable., • Competent in the use of vernier and digital callipers for precision measurement., • Understanding of calibration procedures and non-conformance/NCR processes., • Strong attention to detail with a methodical, accurate approach to record-keeping., • Good communication skills and a reliable work ethic. Benefits & Working Environment • Competitive hourly rate, dependent on experience, • Weekly pay for the duration of the contract, • Core day shift, Monday to Friday, offering a consistent work-life balance, • Free on-site parking and an accessible location in Colchester, • Opportunity to work with a reputable, well-established engineering business How to Apply If you are interested in this Quality Inspector (Romer Arm / CMM) position in Colchester, Essex, and meet the criteria above, please submit your updated CV today to apply, or contact the All Square Recruitment team directly for further details

Murphy is recruiting for a Site Engineering Manager to work with Energy on GGP - ATNC - Norwich to Tilbury Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. A day in the life of a Murphy Site Engineering Manager: Assist with temporary works design schemes Maintain good working relations with client / designer / Team, together with our supply chain. Advise engineers on setting out methods and techniques. Ensure that the drawings and specification documents contain sufficient, accurate information for construction of the works. Formally request any missing information in sufficient time to allow the programme to proceed without delay. Communicate with foremen and supervisors to ensure full understanding of information provided. Overseeing the selection and requisition of materials and plant for the use in the construction process. Prepare written risk assessments and method statements for the control of the works. Keep a full and accurate daily site diary, including any changes/variations, subcontractors’ attendance, and records of work related discussions with client / designer / project team. Ensure that inspection and test plans are completed as required by the PMP / Specification, including a check of dimension accuracy and quality. Still interested, does this sound like you? Experience in Major Civil Engineering or Construction projects. Experience within ITPs, RAMs & Temporary Works. Ability and confidence to communicate and present to Top Level Management, Senior level clients and public. Excellent knowledge of current civil engineering legislation as well as Health & Safety and Environmental legislation. Ability and confidence to discuss engineering issues with people across various levels and disciplines. Ability to produce, implement and manage safe systems of work for construction procedures

Health and Safety Business Partner - £60,000 - £65,000 + Package - Residential Construction - East Anglia – ID: 11744 Want to move away from spending your days carrying out inspections and into a role where you'll genuinely influence how Health and Safety is delivered? We're working with a growing residential construction business that's looking to appoint a Health and Safety Business Partner to support its East Anglia & Northern Home Counties region. This isn't a traditional Health and Safety Advisor role. Site inspections are carried out by an external specialist provider. Your focus will be on understanding the findings, working alongside operational teams and senior leaders, and coaching them to improve performance before issues arise. You'll be a trusted business partner, helping embed accountability and create a proactive Health and Safety culture across the region. You'll work across regional offices and live projects, partnering with everyone from Site Managers through to senior leadership. Success in this role isn't measured by the number of inspections you complete. It's measured by your ability to influence people, challenge thinking, coach managers and improve performance. What's in it for you: £60,000 - £65,000 salary £6,000 Car Allowance Discretionary Bonus 10% Pension Scheme Private Medical Insurance Life Assurance 26 days Annual Leave + Bank Holidays Hybrid working with flexibility to manage your own diary What you will be doing: Coach and influence managers at all levels to improve Health and Safety performance Drive proactive conversations from the earliest stages of developments Support Construction Phase Plans and provide practical CDM guidance Review inspection findings with the external Health and Safety provider and identify root causes rather than symptoms Lead meaningful conversations that encourage ownership and accountability Support accident investigations and share lessons learned across the business Build strong relationships with operational, technical and leadership teams Act as the link between the regional business and the external Health and Safety inspection provider. What they’re looking for: You'll be someone who naturally builds credibility with people on site and in the boardroom. You'll know how to ask the right questions, challenge positively and coach people to make better decisions rather than simply telling them what they've done wrong. You'll ideally have: NEBOSH Diploma or be working towards it CMIOSH or be working towards Chartered status Residential Construction experience would be ideal, although wider construction backgrounds will also be considered. Strong coaching, communication and stakeholder management skills A proactive mindset with a genuine passion for improving culture, not just compliance. If you're looking for a role where your ability to influence people is valued just as much as your technical knowledge, we'd love to hear from you

Solar Electrician – Commercial & Domestic Installations Colchester, Essex Up to £55,000 basic + overtime Full‑time, Permanent Company Van + Fuel Card + Benefits Unify Renewables is recruiting on behalf of our client, a well‑established renewable energy contractor based in Colchester, specialising in Solar PV, Battery Storage and EV Charging solutions across domestic, commercial and social housing projects. Due to continued growth and a strong pipeline of work across Essex and the wider region, they are looking for an experienced Solar Electrician to join their installation team. The Role You’ll be part of a skilled field‑based team delivering high‑quality Solar PV and Battery Storage installations across Essex, Suffolk, Norfolk and occasional projects further afield. This is a hands‑on role involving installation, testing, inspection, commissioning and maintenance of solar systems, with a strong focus on safety, compliance and workmanship. Key Responsibilities Install Solar PV systems on domestic and commercial properties Carry out electrical testing, inspection and commissioning to industry standards Diagnose and resolve faults on solar PV and battery systems Complete accurate documentation, test sheets and installation records Provide clear, professional communication to customers and site contacts Maintain high standards of safety, quality and compliance at all times What We’re Looking For NVQ Level 3 in Electrical Installation AM2 + 18th Edition 2391 Test & Inspect (preferred) Proven experience installing Solar PV systems Strong understanding of inverters, battery systems and associated electrical works Ability to work independently and manage workload effectively Full UK driving licence Experience with SolarEdge or other major inverter/battery manufacturers is highly desirable. What’s On Offer Up to £55,000 basic salary (DOE) Company van + fuel card Competitive overtime rates Full‑time, permanent position 28 days holiday including bank holidays Pension scheme Ongoing training and development Long‑term career prospects within a growing renewable energy business Location Requirement Applicants must live within a reasonable commute of Colchester, as daily attendance at the client’s yard is required before travelling to site. To Apply: If you have the relevant experience and skills, we encourage you to apply by sending your CV. Application Process: Interested candidates should submit a CV and a covering letter detailing their experience and suitability for the role to James Feeley, Department Lead at Unify Renewables. If you have the skill set and are interested in being put forward for this new and exciting position, then please forward your CV immediately. Unify HQ Limited is acting as an Employment Business in relation to this vacancy. If your experience matches, please forward your CV immediately. We thank all applicants who respond, but only those shortlisted will be contacted

Plant Inspector Essex Up to £45,000 + Company Vehicle + Overtime + Excellent Benefits NEOS Engineering are partnered with a well-established and growing business within the construction plant sector who are looking to appoint a Plant Inspector to cover the Essex region. This is an excellent opportunity for an experienced engineer or inspector who enjoys working independently, visiting customer sites, and ensuring plant equipment is safe, compliant, and operating to the highest standards. Previous inspection experience is desirable, although experienced engineers looking to move into an inspection-focused role are encouraged to apply. The Role Carry out inspections on a wide range of construction plant and equipment. Produce clear and accurate inspection reports. Identify defects and recommend remedial actions where required. Provide technical advice and build strong customer relationships. Plan and manage your own workload across customer sites. Ensure all inspections are completed in line with current health and safety standards. The Candidate Experience working on construction plant, heavy plant, agricultural, material handling or related equipment. Strong mechanical knowledge with the ability to identify faults and defects. Previous inspection experience is advantageous. LOLER and/or LEEA qualifications are beneficial but not essential. Excellent communication and organisational skills. Full UK Driving Licence. What's in it for you? Salary up to £45,000 Company vehicle Overtime opportunities Company pension Ongoing training and development Genuine career progression Stable, long-term opportunity If you're an experienced Plant Engineer, Field Service Engineer, Workshop Engineer, Service Engineer, Agricultural Engineer, Material Handling Engineer, or Plant Inspector looking for your next challenge in the Essex area, we'd love to hear from you. Apply today or contact NEOS Engineering for more information

Quality Inspector - Colchester - Day Shift - Temporary - Up to £14p/h We are currently recruiting for a Quality Inspector to join a well-established engineering and manufacturing company based in Colchester. This is a temporary opportunity. Working within a busy manufacturing environment producing specialist air movement and ventilation equipment. This role would suit someone with previous inspection or quality experience who is confident working from engineering drawings and using measuring equipment. About the role: Working within the quality and production environment, you will be responsible for inspecting manufactured components and ensuring they meet the required drawing specifications and tolerances. Using a range of precision measuring equipment and maintaining accurate inspection records. Experience with advanced scanning equipment would be advantageous as well as a good understanding of engineering inspection and the ability to work accurately. Key Responsibilities Inspecting components against engineering drawings and manufacturing specifications Reading dimensions, tolerances, units, revisions and drawing notes Understanding general tolerances and individually toleranced dimensions Using Vernier and digital calipers for external, internal, step and depth measurements Supporting inspection using Romer Arm and AS1 scanning equipment Recording actual measured values, equipment ID, drawing revision and acceptance status Checking calibration status of inspection equipment before use Identifying and quarantining non-conforming products Raising NCRs where products do not meet the required specificationThe Ideal Candidate Previous experience within quality inspection or a similar engineering environment Ability to read and understand engineering drawings Good understanding of dimensions and tolerances Confident using Vernier or digital calipers Strong attention to detail and methodical approach Comfortable recording inspection results accurately Good communication skills Able to work effectively within a busy manufacturing environmentWhat's On Offer Temporary ongoing position £14.00 per hour Monday to Friday Core hours: 07:30 - 15:30 Immediate opportunity within a busy engineering manufacturing environmentApply today for immediate consideration or contact us on (phone number removed) and ask for Louie. #Tier2

Junior Quality Inspector Essex / Hertfordshire Border Permanent | Day Shift | Monday-Friday Salary: Up to £30,000 depending on experience This is an excellent opportunity to join a well-established precision engineering manufacturer supplying high-quality machined components into demanding industries. Rather than looking for an experienced Quality Inspector, we are seeking someone with a solid mechanical engineering background who is looking to develop a long-term career within Quality Inspection. Full training and ongoing support will be provided by an experienced inspection team. This role would suit someone who has completed a mechanical engineering apprenticeship, worked as a CNC Machinist, Manual Machinist, Mechanical Engineer or Engineering Technician and is looking for a new challenge away from production or machining. The Role Working within the Quality department, you will receive training to carry out first-off, in-process and final inspection of precision machined components. You'll develop your skills using a range of precision measuring equipment and inspection techniques while learning how to interpret engineering drawings, complete quality documentation and work within a high-quality manufacturing environment. Key Responsibilities Carry out first-off, in-process and final inspection of precision engineered components. Read and interpret mechanical engineering drawings and specifications. Use precision measuring equipment including micrometers, verniers, height gauges and other inspection tools. Learn to operate inspection equipment including CMMs (training provided). Complete inspection documentation and quality records. Work closely with production and engineering teams to maintain quality standards. Support continuous improvement within the Quality department. Work safely and in accordance with company quality procedures. What We're Looking For We are looking for someone with a genuine interest in engineering and quality who is keen to learn and build a long-term career. Ideally you will have: A mechanical engineering, manufacturing or precision engineering background. The ability to confidently read and interpret mechanical engineering drawings. Experience using basic measuring equipment such as micrometers, verniers or gauges. Good attention to detail and a methodical approach. Strong communication skills and a willingness to learn. Ideal Backgrounds Applicants may currently be working as: CNC Machinist Manual Machinist Mechanical Engineering Technician Production Engineer Engineering Technician Quality Technician Junior Quality Inspector Toolmaker Mechanical Assembly Technician with inspection experience Previous aerospace or CMM experience would be advantageous but is not essential, as full training will be provided. What's on Offer Permanent position. Monday to Thursday: 7:00am – 4:00pm. Friday: 7:00am – 12:00pm. Overtime available. Structured training and development. Opportunity to build a long-term career within Quality Inspection. Salary up to £30,000, depending on experience. Please note: We are only able to consider applicants who already have the unrestricted right to work in the UK. Unfortunately, visa sponsorship is not available for this position

Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a highly motivated and talented Software Engineer to join our AXM team in Colchester, UK. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Summary of the role As a member of our software team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected, working closely on-site with our engineering and hardware teams in Colchester. In this role you will be responsible for designing, developing, maintaining and documenting software functionalities particularly in the area of machine control. You will work on complex hardware-software interaction problems that require strong analytical and data driven approaches to enhance usability and/or extend capabilities. Role and Responsibilities Develop and maintain machine control software for Nordson Dage tools. Work with cross-functional engineering teams. Document software designs and instructions for use. Support and debug field issues. Participate in code reviews/code audits. Transfer code into volume manufacture. Mentor less experienced software engineers. Stay up to date on latest software techniques and trends Any other reasonable duties Skills and Qualifications Degree in a relevant discipline or equivalent experience Proficiency in C# development in a multi-threaded environment Experience building UI and underlying business‑logic layers Practical experience with Core C# .NET technology for GUI development Practical experience with XAML and MVVM, XML and XSLT Experience with Entity Framework Core and SQL Experience with mocking frameworks (e.g., Moq) Good understanding of software development using TDD Strong numerical skills Experience designing/developing software architectures Experience with control software for hardware systems and/or building simulators Desirable Skills: Understanding of X-Ray inspection and materials testing. C++ development in a multi-threaded environment. Experience of tool to factory host communication and understanding of appropriate standards including SECS/GEM. Travel Travel is typically ≤10% (domestic & international), with occasional trips between Aylesbury and Colchester as needed and rare customer‑site visits for installation/knowledge transfer. Day‑to‑day travel demand is generally low for the team. Benefits We offer a flexible work schedule with a hybrid model, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan – 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV. #LI-CK1

Nordson Test & Inspection, a leading provider of advanced inspection and testing solutions, is seeking a highly motivated and talented Electrical Design Engineer to join our team in Colchester, United Kingdom. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Summary of the role You, as Electrical Design Engineer, will be responsible for supporting the electrical/electronic design and testing of new X-Ray and Bond Test products as well as the maintenance of existing products. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. Role and Responsibilities Assist in the design and layout of electrical support systems for X-Ray and Bond Test machinery. Design and documentation of electrical panels, PCBs and general machine wiring. Basic mechanical design for electro-mechanical elements of machines. Practical electrical and electronic prototyping. Specification, documentation and management of electrical bills of materials. Support and improve electrical design of existing product range. Skills and Qualifications Educated to degree level or demonstrable equivalent experience. Several years of experience designing electrical/electronic systems in an industrial setting. Experience of designing electromechanical systems (eg. Robotics, production automation etc.). Solid experience of working as part of a team on medium to large engineering projects. Extensive experience of designing electrical panels for industrial systems (Circuit breakers, contactors, etc.) Experience of specifying and designing wiring looms for electrical machinery CAD experience (preferably AutoCAD, Inventor, Cadstar) Good practical electrical/electronic skills for prototyping / testing. Knowledge of relevant electrical safety standards (IEC61010, NPA79 etc.) Team player with a proactive approach to problem resolution. Communication skills – verbal, written and presentation. A high degree of flexibility in a continuously changing environment. Travel Regular travel between Aylesbury & Colchester dependent upon business needs. Occasional international travel. Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan – 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays Free parking Hybrid working; 2 days a week remote at home (depending on the work), 3 days a week at the office About Nordson Test & Inspection At Nordson Test & Inspection, we value diversity and inclusivity in all aspects of our business. We are an equal opportunity employer and welcome candidates of all backgrounds, experiences, and perspectives to apply. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV. #LI-CK1

Job Title: Senior Support Worker Salary: Up to £31,678 per annum Location: Colchester, Essex Our client already holds a huge presence in the children's residential care sector and is rapidly growing, specialising in children with complex support needs such as emotional and behavioural needs, autism and challenging behaviour Recently receiving 'Good' ratings from Ofsted, they are dedicated to going the extra mile and providing the best support in the industry, thus now aiming for 'Outstanding' rating from Ofsted upon their next inspection. Does this sound like something you would be proud to be a part of? Good news! My client is looking for a Senior Support Worker to join the team - We would love to speak with you, there's no harm in a phone call! £31,678 per annum (plus opportunity for overtime)) Located in Colchester, Essex Senior Support Worker will work with management for best interest of children supported with emotional and behavioural needs Senior Support Worker benefits inclusive of but not limited to: - Onsite parking for Senior Support Worker - Breakfast spread every morning in the office - Learning development academy (Access to training/development courses) - Education grants & study leave - Leadership academy (Clear progression structures and goal setting to stay on track for management progression) - Access to medical scheme - Mental Wellbeing day (one per year) - Paid sick leave (3 days per year increasing by 2 days per year of service) - Extra day of annual leave plus £100 voucher on your birthday - Amazon vouchers for Christmas! - 4 company social events per year and team building days - Opportunity for career progression due to rapidly growing organisation - 28 days holiday entitlement - DBS check - Pension If you meet the below criteria and are keen to discuss this role further then please do not wait any longer - Apply to our Senior Support Worker position! Minimum Level 3 NVQ in Residential Childcare or Children and Young People (Desireable) Previous experience within Ofsted regulated children's residential home at Senior Support Worker level (Essential)For further information about our Senior Support Worker position please apply now

Section Engineer Location: Colchester, Essex Rate: £375/day LTD or CIS Start: Immediate Are you an experienced Section Engineer with highways, drainage and structures experience looking for your next contract? We're recruiting for a Section Engineer to join a live highways infrastructure project in Colchester. You'll be responsible for delivering highways, drainage and structures works, ensuring quality standards are met and supporting the successful delivery of the scheme. Key Responsibilities ·Manage engineering activities across highways, drainage, structures, kerbing and surfacing works. ·Complete ITPs, quality documentation and inspection records. ·Raise and manage Technical Queries (TQs). ·Support permits to dig and utility avoidance activities. ·Work closely with site teams to ensure safe, efficient delivery. Requirements ·Experience as a Section Engineer or Senior Engineer on highways projects. ·Strong background in highways, drainage, structures, kerbing and surfacing. ·Experience with ITPs, QA documentation and TQs. ·EUSR CAT1 desirable. ·Experience using CAT4, vLoc3Pro or similar utility detection equipment is advantageous. Apply now or call Brett on (phone number removed) if you're a Section Engineer, Senior Section Engineer, Highways Engineer, Civil Engineer, or Site Engineer with highways experience looking for your next freelance opportunity in Essex

Murphy is recruiting for a Senior Engineer to work with Energy on GGP- Norwich to Tilbury (ATNC) Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. A day in the life of a Murphy Senior Engineer: Establish and promote best practice in health, safety and environmental matters in conjunction with the SHQE department. Assist with temporary works design schemes Maintain good working relations with client / designer / Team, together with our supply chain. Advise engineers on setting out methods and techniques. Ensure that the drawings and specification documents contain sufficient, accurate information for construction of the works. Formally request any missing information in sufficient time to allow the programme to proceed without delay. Communicate with foremen and supervisors to ensure full understanding of information provided. Overseeing the selection and requisition of materials and plant for the use in the construction process. Prepare written risk assessments and method statements for the control of the works. Keep a full and accurate daily site diary, including any changes/variations, subcontractors’ attendance, and records of work related discussions with client / designer / project team. Ensure that inspection and test plans are completed as required by the PMP / Specification, including a check of dimension accuracy and quality Still interested, does this sound like you? Experience in Construction or Civil Engineering projects. Experience within ITPs, RAMs & Temporary Works. Excellent knowledge of current civil engineering legislation as well as Health & Safety and Environmental legislation. Ability and confidence to discuss engineering issues with people across various levels and disciplines. Ability to produce, implement and manage safe systems of work for construction procedures

Section Engineer - Lower Thames Crossing Location: Lower Thames Crossing - Roads North Project Rate: £500-£520 per day Contract: 6 months Start: ASAP Interview: ASAP We are currently seeking an experienced Section Engineer to join the Lower Thames Crossing (LTC) Roads North Project, working with a major Tier 1 contractor on one of the UK's largest infrastructure projects. The successful candidate will have proven experience in a similar Section Engineer or Senior Production Engineer role, ideally gained on large-scale infrastructure projects. The role will involve leading and supporting Site Engineers across production, engineering, quality, programme and handover activities. Key Responsibilities Produce three-week lookahead programmes aligned with the stage programme. Monitor progress, record and report programme variances. Review permanent and temporary design drawings ahead of works and resolve design queries. Provide guidance and coaching to engineers on specifications, standards and setting out. Develop and review Inspection & Test Plans (ITPs) for self-delivered works and subcontractor activities. Carry out weekly audits of Site Engineer reports and records. Raise and manage Non-Conformance Reports (NCRs) and corrective actions. Produce Material Approvals and review subcontractor submissions. Produce Works Package Plans and conduct weekly safety tours. Ensure works comply with LTC specifications, environmental requirements and project standards. Ensure plant and materials are appropriately resourced and procured. Produce and approve redlines and compile construction certificates. Provide input into O&M manuals and H&S files. Lead, support and coach Site Engineers and Apprentices. Essential Requirements Proven experience in a similar Section Engineer / Senior Production Engineer role. Experience working on large-scale infrastructure projects. Strong leadership and communication skills. Good knowledge of construction regulations and best practices. Ability to work under pressure and meet tight deadlines. Engineering or Construction Management qualification. Full UK driving licence. CSCS. Ability to complete a fit-for-work medical. Ability to pass a pre-start drug and alcohol test. Ability to obtain BPSS Security Clearance, including provision of a basic DBS check. Contract Details £500-£520 per day 6-month initial contract Immediate interview Immediate start Major Lower Thames Crossing infrastructure project Based on the Lower Thames Crossing Roads North Project If you are an experienced Section Engineer with major infrastructure experience and are available for an immediate interview and start, please apply now for immediate consideration

We are currently working with a well-established civil engineering and infrastructure contractor, who are looking to appoint an experienced Section Engineer to join a highways project in Colchester, Essex. The successful candidate will play a key role in the delivery of a major roundabout and highways improvement scheme, working closely with the Project Manager, Site Agent and wider site team to ensure the works are delivered safely, efficiently and to the required quality standards. This is an excellent opportunity for a Section Engineer with a strong civil engineering background who is looking to take the next step in their career with an established and respected main contractor. The Role As Section Engineer, you will be responsible for providing technical and engineering support across your section of the project, ensuring works are delivered in accordance with the programme, specifications and relevant standards. Your responsibilities will include: Managing and coordinating engineering activities across your section of works. Setting out and providing technical guidance to site teams. Working closely with the Site Agent and Project Manager to ensure the successful delivery of the works. Reviewing drawings, specifications and technical information. Ensuring works are constructed in accordance with the approved designs and relevant standards. Carrying out quality inspections and maintaining appropriate records. Monitoring progress and supporting the delivery of the project programme. Liaising with subcontractors, suppliers and the wider project team. Assisting with the preparation of inspection and test plans, quality documentation and other project records. Identifying technical issues and working with the project team to develop effective solutions. Supporting the implementation of health, safety, environmental and quality requirements. About You Our client is looking for a Section Engineer with proven civil engineering experience, ideally gained on highways or infrastructure projects. You will need to demonstrate: Previous experience working as a Section Engineer on civil engineering projects. Strong knowledge of civil engineering construction and site delivery. Experience working on highways, roads or infrastructure schemes. The ability to read and interpret engineering drawings and specifications. Experience working with subcontractors and site teams. Strong communication and organisational skills. A proactive approach with the ability to work independently and as part of a wider project team. Relevant engineering qualifications or equivalent industry experience. CSCS and relevant site-based engineering qualifications. A full UK driving licence would be advantageous. The Opportunity The role would suit an experienced Section Engineer who has a genuine civil engineering construction background and is looking to join a company where they can develop their career while working on technically interesting infrastructure projects. Competitive salary and benefits package available, including opportunities for training, development and career progression. Interested? If you are a Section Engineer with civils/highways experience and are considering your next opportunity in the Colchester area, we'd be keen to hear from you. Apply now for a confidential conversation about the role and project

Junior / Assistant Electrical Manager Location: Basildon, Essex Salary: Up to £40,000 per annum Job Type: Permanent, Full-Time Junior / Assistant Electrical Manager - Social Housing Are you an experienced electrical professional looking to take the next step into management? We're working with a well-established contractor within the social housing sector that is looking to recruit a Junior / Assistant Electrical Manager to join their growing team based in Basildon. This is an excellent opportunity for someone with a strong electrical background who is looking to develop their management career while working alongside experienced senior managers on a variety of planned maintenance and compliance projects. The Role As a Junior / Assistant Electrical Manager, you'll play a key support role within the electrical management team, assisting with the day-to-day delivery of social housing electrical contracts. You'll gain hands-on experience across operational management, compliance, client liaison, and workforce supervision, with clear opportunities for progression. Key Responsibilities Support Senior Electrical Managers with the delivery of electrical works across social housing contracts. Assist in managing directly employed electricians and subcontractors. Help monitor project progress to ensure works are completed safely, on time, and within budget. Carry out site visits and quality inspections to ensure high standards of workmanship. Assist with ensuring compliance with current electrical regulations, health and safety legislation, and company procedures. Support the planning and scheduling of reactive, planned maintenance, and compliance works. Liaise with residents, clients, and internal departments to ensure excellent customer service. Assist in reviewing certification, documentation, and compliance records. Support the resolution of technical issues and customer queries. Contribute to continuous improvement initiatives across the electrical department. Requirements Previous experience within the electrical industry, ideally within social housing, maintenance, or property services. Qualified Electrician (NVQ Level 3 or equivalent). 18th Edition Wiring Regulations qualification. Testing & Inspection qualification (2391 or equivalent) is desirable. Good understanding of electrical compliance and current regulations. Strong organisational and communication skills. A proactive attitude with a genuine desire to progress into electrical management. What's on Offer Salary up to £40,000 depending on experience. Permanent, full-time position. Opportunity to learn from experienced Electrical Managers. Clear career progression into Electrical Management. Supportive and collaborative working environment. Holiday allowance. Ongoing training and professional development.If you're looking to build a long-term career within electrical management and want to join a respected social housing contractor that invests in its people, we'd love to hear from you. Apply today or get in touch for a confidential discussion

Job Title: Health and Social Care Tutor Salary: Up to £34,000 Our client is seeking an enthusiastic and passionate learner focused Health and Social Care Tutor to deliver high quality, supportive and engaging qualifications to candidates enrolled onto their programmes. You will be delivering Adult Care qualification up to level 5. Health and Social Care Tutor - Main Responsibilities Engage and support learners with some blended delivery and workplace observation to achieve qualifications in a timely manner Manage a caseload of learners effectively meeting OFSTED and Awarding Bodies requirements in teaching, learning and assessment for learners Managing caseloads to ensure that KPIs are met Undertake induction, initial assessment, diagnostic, ILP, skills scan and reviews with learners ensuring feedback provided and acted up appropriately Develop scheme of work, lesson plans and course resources for the delivery of the qualifications. Maintaining regular contact with employers throughout the full learning journey As well as delivering high-quality vocational sessions, you will establish strategies for dealing with poor attendance, punctuality, behaviour and class performance as well as keeping registers and other student information as required by funding rules and for statistical purposes. Health and Social Care Tutor - Other Duties To support learners in developing their practice through standardisation and sharing best practices. Promote a high-performance and positive culture where learners are enthused and motivated to perform their best through supportive and professional leadership and management. Assess knowledge and understanding through teaching, learning, and assessment. Support learners in developing their behaviours relating to their apprenticeship. Assist in the coordination of learners’ exams Overcome barriers to learning and adapt delivery to meet learner’s needs Understand and work on key performance indicators Be a proactive team player, possessing practical organisational and planning skills, including the ability to manage your diary and caseload. Knowledge and Skills Possess an Assessor qualification: A1, TAQA, CAVA, or D32, D33 and a recognised teaching or training qualification at level 3 or above (hold or be working towards), which could include any of the following: Level 3 or 4 Award in Education and Training or Diploma or Certificate in Education. Experience in educational delivery and working knowledge within the training/education sector Commitment to CPD/professional development/safeguarding Minimum Level 3 professional teaching qualification (PTLLS teaching qualification or equivalent) GCSE Grade A-C in English, Maths, and IT or equivalent Occupational competence in delivering vocational qualifications An understanding of curriculum design and assessment Up-to-date knowledge of the education inspection framework A passion for changing lives through quality teaching Be confident in delivering and support learners with Maths and English Functional Skills when required Identify individual learner needs, implementing and reviewing SMART targets for their assessment plans Ability to work under pressure and to strict deadlines and targets Paul Feldman is the National Skills Agency Data Protection Officer. Your data will be stored until notice is given by you for it to be removed. Our Data Protection Policy will be forwarded to you on request. As we get a high number of applications we may be unable to give feedback to unsuccessful candidates. We will retain your details to keep you informed of other opportunities. National Skills Agency Ltd is acting as an Employment Agency in relation to this vacancy and is an Equal Opportunities employer we welcome applicants from all backgrounds

Solar PV Electrician Colchester | Domestic, Social Housing & Commercial | Full-Time £45,000 - £55,000 (DOE) + Overtime About the Role A rapidly growing renewable energy company based in Colchester, specialising in Solar PV, Battery Storage and Renewable Energy systems, is looking for an experienced Solar PV Electrician to join their installation team. This is a great opportunity to join an expanding business with genuine long-term career prospects. What You'll Be Doing • Carrying out Solar PV and Battery Storage installations, • Electrical testing, commissioning, fault finding and maintenance, • Reporting to the Colchester yard each morning to collect equipment and materials before travelling to site, • Working across a variety of domestic, social housing and commercial projects What We're Looking For • Minimum 1 year's experience in the Solar PV industry, • NVQ Level 3 in Electrical Installation, • 18th Edition Wiring Regulations, • Full UK Driving Licence, • Strong understanding of Solar PV systems and associated electrical works, • Ability to work independently and as part of a team, • Excellent attention to detail and commitment to high-quality workmanship Desirable (not essential) • ECS Gold Card, • AM2 qualification (or working towards), • Solar PV Installation qualification, • Battery Storage installation experience, • Testing & Inspection qualifications (2391 or equivalent), • Experience with major inverter/battery manufacturers What's On Offer • £45,000 - £55,000 basic + overtime, depending on experience, • Company van and fuel card, • Company pension scheme, • 28 days holiday including bank holidays, • Company uniform and PPE, • Ongoing training and development, • Long-term career prospects with a growing business Location Requirement Applicants must live close to Colchester, as daily attendance at the yard is required. A DBS check and H&S training will be required before starting, due to contract requirements

Senior M&E Engineer (Water & Gas) Location: South East of England Rate: £350-£450 per day Contract: 12 months Spencer Clarke Group are supporting a local authority to appoint a Senior M&E Engineer within their Housing and Property Operations team. You will support the Compliance Manager (Gas and Water) to deliver a strong compliance assurance service across council housing assets. This is a site-based role focused on gas, heating, hot water and water hygiene compliance, including inspections, contractor oversight, performance reporting and supervising two inspectors. Responsibilities include Supporting delivery of statutory gas and water compliance across domestic heating, hot water, water hygiene and associated mechanical services Providing technical advice to operational teams, residents, contractors and wider stakeholders on compliance matters Coordinating and quality checking inspection activity, including supervising two inspectors and escalating technical issues where required Monitoring contractor performance, reviewing completed works, challenging poor standards and contributing to KPI reporting Completing and coordinating pre and post inspections, surveys and technical checks to ensure work is safe, compliant, on time and within budget Reviewing specifications, schedules of work, drawings and contractor documentation to ensure they meet legislation and council standards Identifying compliance risks, recurring defects and opportunities for improvement and value for money Supporting planned maintenance, refurbishment programmes and investment planning across mechanical services * Producing clear reports and accurate records to support audit requirements, payment checks and effective asset management About you Strong experience in gas and water compliance within social housing, local government or a similar environment Proven background in inspections, contractor monitoring, KPI reporting and ensuring works meet technical and contractual standards Good working knowledge of relevant legislation and guidance including Gas Safety Regulations, Building Regulations, HSG274 and CDM 2015 Relevant ACS qualifications equivalent to NVQ Level 4, including CCN1, CENWAT, CPA1 and CKR1 Water Regulations qualification and Legionella awareness, or equivalent demonstrable experience Additional commercial gas ACS units and Legionella duty-holder training are desirable Understanding of heat metering and HNTAS compliance is beneficial Basic competence in electrical systems How to Apply Send your CV or get in touch with Cameron Nicholls at Spencer Clarke Group on (phone number removed) or

Goods Inwards Quality Inspector Location: Colchester, Essex Salary: Competitive Salary + Benefits An excellent opportunity has arisen for a Goods Inwards Quality Inspector to join an established engineering and manufacturing business. This is a hands-on inspection role responsible for checking incoming components, materials and finished parts before they enter the production process. You'll work closely with the Production, Engineering, Procurement and Warehouse teams to identify quality issues, prevent defective parts from reaching assembly and help maintain consistently high standards. The role would suit someone with previous experience in a manufacturing or engineering environment who enjoys a practical role and has a good eye for detail. This is not purely a cell-based quality role. You'll be working directly with components and materials, carrying out inspections and, where required, undertaking basic rework and preparation of parts before they move into production. The Role As a Goods Inwards Quality Inspector, your responsibilities will include: • Inspecting incoming components, materials and parts for quality and conformity., • Carrying out visual, dimensional, quantity, finish and basic weld inspections., • Checking components against engineering drawings, specifications and work instructions., • Using measuring and inspection equipment to confirm dimensions and quality., • Identifying defective, damaged or non-conforming parts., • Recording non-conforming materials where required., • Working with Engineering, Production, Procurement and suppliers to resolve quality issues., • Supporting final product inspection when required., • Preparing metalwork and components for production through basic dressing, hole clearance and other preparation work., • Carrying out minor rework or rectification of components where required., • Checking pre-assembled parts and identifying faults or issues before they progress further through production., • Using hand and power tools as required to inspect, prepare or rework components., • Maintaining accurate inspection records and documentation., • Supporting continuous improvement activities aimed at reducing supplier defects and improving incoming quality., • Maintaining a clean, tidy and safe working environment. About You We're looking for someone who is practical, reliable and takes pride in getting things right first time. You'll ideally have: • Previous experience within a manufacturing, engineering or production environment., • Previous experience in a quality inspection or goods-in inspection role., • Ability to read and understand engineering drawings and specifications., • Experience using measuring and inspection equipment., • Good attention to detail and a methodical approach to checking components., • Comfortable working hands-on with parts, materials and production components., • Experience using hand and power tools., • Good communication skills and the confidence to raise quality issues when something isn't right., • Ability to work effectively with Production, Engineering, Warehouse and Procurement teams., • Good numeracy and IT skills., • A strong work ethic and reliable approach to work. Experience with sheet metal, fabrication or welding would be advantageous. Experience working within an ISO 9001 quality environment would also be beneficial. Forklift or reach truck experience would be an advantage but is not essential. What's on Offer • Competitive salary., • Permanent position within an established engineering business., • Opportunity to develop your quality and engineering knowledge., • Varied and hands-on working environment. Why Apply? This is an opportunity to take on a varied quality role within a busy engineering and manufacturing environment. Monday to Friday, day shift with overtime with ongoing training and development. You'll have responsibility for ensuring components meet the required standards before they reach production, while also getting involved practically with parts, materials and preparation work. If you're an experienced Quality Inspector, Goods Inwards Inspector, Manufacturing Inspector or Production Quality professional who enjoys a hands-on engineering environment, we'd like to hear from you

Technical Services Manager - Smoke Control & AOV Systems Location: London Salary: £50,000 to £60,000 PA DOE Role Overview This role is responsible for identifying and developing opportunities for remedial works, system upgrades, and replacement projects across smoke control and AOV systems. Working closely with clients, engineers, and operational teams, you'll turn technical findings from inspections, surveys, and maintenance activities into practical solutions that improve system performance, compliance, and safety. The role combines technical knowledge with a commercial mindset, helping customers understand their options while ensuring projects are scoped, priced, and delivered successfully. Key Responsibilities Identify opportunities for repairs, upgrades, and replacement works within existing client sites. Review survey reports, engineer recommendations, and inspection findings to develop practical solutions. Prepare quotations and proposals for remedial works, system upgrades, and new installations. Ensure solutions meet fire strategy requirements and are practical to deliver. Work closely with engineers and project teams to support successful delivery of works. Build strong relationships with customers, providing technical advice and guidance on system performance and compliance. Support business development and account management teams in growing existing accounts and winning new business. Provide technical support during installations, commissioning, and fault-finding activities when required. Act as a technical point of contact for smoke control and AOV-related enquiries. Skills & Experience Experience working with smoke control, AOV, or related life safety systems. Good understanding of system upgrades, remedial works, and replacement projects. Ability to survey, scope, and price technical works. Understanding of fire strategies, cause-and-effect requirements, and compliance standards. Strong communication skills and confidence working directly with customers. Commercially aware with the ability to identify opportunities and deliver value for clients. Experience within facilities management, building services, fire protection, or technical services environments. What Success Looks Like Winning and delivering remedial works and upgrade projects. Building strong customer relationships and identifying new opportunities. Producing accurate quotations and achieving good conversion rates. Working effectively with operational and commercial teams. Delivering commercially successful projects that meet customer expectations. Full UK Driving Licence required Apply now to find out more & take the next step in your career! TJCOM

Murphy is recruiting for a Section Engineer to work with Energy on GGP - Norwich to Tilbury Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. A day in the life of a Murphy Section Engineer: Resolving technical problems at all levels. Carry out inspections in accordance with the Inspection and Test Plan in a timely manner. The production of survey information and red – lined drawings for the completion of the As-built records. Ensure equipment is calibrated, in date and suitable checked in accordance with company policies and the manufacturers’ defined requirements. Ensure construction operations are carried out in accordance with the Contract requirements using the appropriate procedures. Ensure all site personnel have clear, accurate and appropriate information to carry out their duties. Supervises the outputs and confirms that the project environmental requirements are met. Ensure all materials on site are suitable, stored in line with manufacturer’s recommendations current working practice, contract specification or project requirements. Assist the Site Management team to update KPI’s, material reconciliation and progress reports. Still interested, does this sound like you? Degree qualified Civil Engineering or Similar Previous experience within a Section or Site Engineer role Experience on Construction or Civil Engineering projects. Experienced in surveying and setting out techniques Sound understanding of Quality, Safety, Health, Environmental and Sustainability project requirements

Inspection Assembly & Packaging Operations Manager. You will lead inspection, assembly and packaging operations at a GSK site in the United Kingdom. Lead and coordinate inspection, assembly and packaging operations to meet safety, quality, schedule and cost targets.

Pangea Recruitment Ltd is seeking a Field Service Engineer to cover the UK only, supporting food equipment installations, commissioning, servicing and diagnostics across the Midlands, EMids, Yorkshire and other regions.The role offers a £50K basic salary plus bonus, overtime, car, pension and healt

KOMPAN Global seeks an organised Inside Sales Administrator to assist with customer quotes, inquiries and coordination of field-based inspectors, engineers and subcontractors.You will help prepare reports, support repairs/maintenance quotes, and liaise with customers to keep projects on track.You wi

Quality Inspection Team Leader. Training & setting the standard requirements for the team on all quality inspection/reworking activities to company standards including the use of and application of eQCC (Formel D’s Electronic Data Management System). Creating Statement of Work for all projects of

You will perform dimensional, visual, and metallurgical inspections using handheld gauges, optical inspection equipment, and specialized testing equipment while collaborating with manufacturing and quality teams to ensure products meet customer specifications. Laborup in the United Kingdom is seekin

This role involves spearheading the design and validation of inspection technologies to ensure compliance and enhance manufacturing processes. A leading pharmaceutical manufacturing company in the North East of England is seeking a MSAT Site Automated Visual Inspection and Leak Detection Lead.

As Highway Inspection Team Manager, you will lead the day-to-day management of the inspection team, ensuring inspections are undertaken in line with statutory requirements and industry standards. Lead and develop a high-performing team delivering statutory highway inspections. Highway Inspection Tea

Solihull Council is seeking an experienced Highway Inspection Team Manager to lead the inspection team and ensure statutory highway checks meet standards.