Trabajos high paying en LutonCrear alertas

Lead Hardware Engineer \n Based in Luton \n 12-month contract \n Paying up to £70p/h (Inside IR35) \n \n Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance \n \n Overview: Required to solve complex technical challenges involving high-speed digital design, FPGA-based architectures, signal processing, hardware integration and system qualification within a highly regulated defence environment. \n \n Responsibilities: \n\n • Design and develop complex digital and mixed-signal hardware solutions for defence and aerospace applications.\n, • Define hardware architectures for FPGA, SoC and processor-based systems.\n, • Capture schematics and support PCB layout activities for high-speed, high-performance digital designs.\n, • Design and verify high-speed interfaces including DDR memory, PCIe, Ethernet and similar protocols.\n, • Integrate FPGA, processor, software and firmware components into complete system solutions.\n, • Perform design analysis, simulation, validation and verification activities.\n, • Support hardware bring-up, debugging and root-cause investigation at board and system level.\n, • Work closely with Systems, Firmware, Software, RF, Mechanical and Production Engineering teams.\n, • Support environmental, EMC/EMI and qualification testing in accordance with defence and aerospace standards.\n, • Produce technical documentation, design evidence and progress reporting in accordance with structured engineering lifecycles.\n, • Support customer demonstrations, integration activities, acceptance testing and trials.\n\n \n Experience required: \n\n • Proven experience designing high-speed digital electronics within aerospace, defence or other safety/mission-critical industries.\n, • Strong background in FPGA and SoC-based hardware architectures (Xilinx, AMD, Intel/Altera or equivalent).\n, • Practical board-level debugging using oscilloscopes, logic analysers, spectrum analysers and protocol analysers.\n, • Experience integrating hardware, firmware and software on complex embedded systems.\n, • Experience developing products to demanding EMC, EMI and environmental requirements.\n, • Experience designing complex multilayer PCBs incorporating: High-speed serial interfaces; High-performance processors; DDR memory subsystems & FPGA-based signal processing solutions.\n, • Knowledge of DO-254, DEF STAN, MIL-STD or equivalent aerospace and defence standards.\n, • Experience with FPGA signal processing architecture\n\n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Work Package Manager \n Luton \n 12-Month Contract \n Paying up to £80p/h (Inside IR35) \n \n Please note - due to the nature of the work, you'll be required to hold or be eligible to obtain a high level of UK security clearance \n \n Overview: As the Engineering Work Package Manager, you will be required to define and structure the project?s Work Breakdown Structure (WBS), plan and schedule engineering activities, and provide regular progress reports. You will also establish key performance indicators (KPIs) to measure efficiency and effectiveness, using these to monitor and improve engineering performance. \n \n Key Responsibilities \n\n • Lead the engineering side of projects\n, • Providing teams with clear expectations of the engineering outcomes\n, • Ensuring teams operate consistently within the Policies & Procedures and foster the improvement goals defined by the Engineering Function\n, • Manage multi-discipline teams across sites\n, • Establishing and maintaining good lines of communication internally across the Engineering IPT, with the IPT lead, Project Manager and Functional Heads\n, • Monitor progress, risks, and technical performance\n, • Make sure designs meet customer needs and are fully documented\n, • Controlling project configuration and change management to ensure design reuse is maximised\n\n \n Required Experience \n\n • Ability to plan and organise engineering work packages\n, • Good problem-solving skills\n, • Experience managing budgets and schedules\n, • Ability to communicate effectively with a wide range of stakeholders including manager, suppliers and customers\n, • Strong Leadership ability\n, • Solid understanding of the engineering lifecycle\n\n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Principal Firmware Engineer \n Based in Luton \n 12-month contract \n Paying up to £85p/h (Inside IR35) \n \n Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance \n \n Overview: As the Principal Firmware Engineer, you will work with the support of experts in their field, using world-class facilities to deliver Firmware for complex digital systems that meet challenging future customer requirements. \n \n Responsibilities: \n\n • Auto-generating code using model-driven engineering using MATLAB and Simulink tools\n, • Design using tools such as Xilinx, TCL, Verilog, System Verilog, and UVM\n, • Derivation of detailed Firmware requirements and architecture from system requirements\n\n \n Experience required: \n\n • Design tools such as Xilinx, TCL, Verilog, System Verilog, and UVM\n, • FPGA architectures such as Xilinx 7. Xilinx UltraScale; Intel (Altera) or Microsemi (Actel).\n, • Fast interfaces such as PCIe, Ethernet, and JESD\n, • A structured approach to firmware design (RTCA DO-254 or similar)\n, • Cryptography and anti-tamper techniques\n, • Artificial Intelligence including machine learning and genetic algorithms\n, • Electronics test methods and equipment\n, • Working in mixed discipline teams\n, • HNC/HND or Undergraduate Degree (Electronic Engineering, Computer Science, AI, Games Programming, Physics, or Applied Physics) or you may just have lots of skills and experience gained through your hard work.\n\n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

\n Product Security Engineer \n Luton \n 6-month contract \n Paying up to Circa £93p/h (Inside IR35) \n \n Please note - Due to the nature of the work, you'll be required to hold a high level of UK Security Clearance \n Overview: As the Product Security Engineer /Lead security Engineer, you'll take responsibility for all security aspects of product design, development, verification and maintenance through all phases of the product lifecycle. \n The role will focus on undertaking security risk assessments, preparing security risk mitigation plans, deriving security requirements and working closely and directly with product development teams to design, implement and maintain appropriate security controls and the production of wider security artefacts. \n \n Responsibilities: \n\n • Production of Security Management Plans, work package descriptions and cost estimates in support of product bids, services and proposals.\n, • Undertaking security risk assessments, risk mitigation plans, mitigation gap analysis and preparation of security management documentation for system assurance.\n, • Defining product security requirements, advising development teams on bespoke implementations for product security control implementations and overseeing product development activities.\n, • Liaison with internal and external security assurance authorities to desmontrate product compliance against recognised UK and wider frameworks.\n, • Driving collaborative working with external security authorities such as the NCSC to provide underwriting of security solutions.\n, • Understanding and management of security activities within development, testing and manufacturing environments.\n, • Advising development teams on suitable platform lockdown and configurations, and supporting penetration test activities. Analysing penetration test results and preparation of remedial action plans.\n, • Identify, communicate and drive through life security management, including but not limited to obsolescence planning, vulnerability and patch management for all products within area of responsibility.\n, • Lead security incident management teams during incident/crisis situations in conjunction with Head of Product Security for EW/FCA.\n, • Review, maintain and participate corporate product security policies.\n, • Deliver product security training to project engineering teams.\n\n \n Essential Skills & Experience \n\n • Experience in the development of besoke product-based security solutions for a military and/or commercial products and systems.\n, • Graduate degree in relevant engineering, computing or related scientific discipline, and/or evidence of further professional study.\n, • Full membership of an NCSC recognised professional security body organisation (i.e. CIISec, ISC2 or ISACA).\n, • Recent experience and demonstratable knowledge of live and legacy UK/EU/NATO information security standards and frameworks, including the UK MOD Secure by Design framework, GovS 007, HMG IS1&2, ISO27001, NIST SP800-30/37/53, UK MOD Information Security related JSPs, EU CRA and US DoD information security policies.\n, • Practical experience of producing technical assurance documentation such as Key Management Plans, Testing Security Instructions, Security Operating Procedures and Security Cases.\n, • Knowledge of current cryptographic technologies and key management systems.\n, • Understanding of Model Based System Engineering (MBSE) and how Product Security directly inputs into the process.\n, • Knowledge and understanding of bespoke product-specific Operating Systems, Firmware and Software security controls and how to apply them.\n, • Knowledge of Quantum Cryptography & Quantum Key management.\n, • Experience or knowledge of existing threat intelligence sources.\n, • Knowledge of NATO security policy, risk management and Accreditation.\n\n \n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Lead Hardware Engineer Based in Luton 12-month contract Paying up to £70p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance Overview: Required to solve complex technical challe

Work Package Manager Luton 12-Month Contract Paying up to £80p/h (Inside IR35) Please note - due to the nature of the work, you'll be required to hold or be eligible to obtain a high level of UK security clearance Overview: As the Engineering Work Package Manager, you will be requir

Product Security Engineer Luton 6-month contract Paying up to Circa £93p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to hold a high level of UK Security Clearance Overview: As the Product Security Engineer /Lead security Engineer, you'll take re

Paying up to Circa £93p/h (Inside IR35).Due to the nature of the work, you'll be required to hold a high level of UK Security Clearance.As the Product Security Engineer/Lead security Engineer, you'll take responsibility for all security aspects of product design, development, verification and maint

Fortus recruitment are currently recruitng for an Electrician on a perm basis to join a social housing contrcator paying between £38,000 to 43,000 per annum with a company van and fuel card supplied working across Bedfordshire. Essential Qualifications NVQ level 3 Electrical installations 18th Edition Wiring Regulations (BS 7671). City & Guilds 2391 (Inspection & Testing) Experience Proven experience working as an electrician. Experience working in a fast-paced environment while maintaining a high standard of work. Competent in fault finding, installation, testing, and inspection. Skills & Attributes Excellent communication skills with clients, colleagues, and management. Able to work independently and as part of a team. Strong organisational skills with good attention to detail. Competent in completing electrical certificates, job sheets, and all associated paperwork accurately and efficiently. Professional, reliable, and committed to delivering high-quality workmanship. Desirable (but not Essential) ECS Gold Card. Working with / Asbestos Awareness certification. PASMA certification. Benfits include: • Paid holiday, • Company pension, • Van and fuel card

Product Security Engineer Luton 6-month contract Paying up to Circa £93p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to hold a high level of UK Security Clearance Overview: As the Product Security Engineer /Lead security Engineer, you'll take responsibility for all security aspects of product design, development, verification and maintenance through all phases of the product lifecycle. The role will focus on undertaking security risk assessments, preparing security risk mitigation plans, deriving security requirements and working closely and directly with product development teams to design, implement and maintain appropriate security controls and the production of wider security artefacts. Responsibilities: Production of Security Management Plans, work package descriptions and cost estimates in support of product bids, services and proposals. Undertaking security risk assessments, risk mitigation plans, mitigation gap analysis and preparation of security management documentation for system assurance. Defining product security requirements, advising development teams on bespoke implementations for product security control implementations and overseeing product development activities. Liaison with internal and external security assurance authorities to desmontrate product compliance against recognised UK and wider frameworks. Driving collaborative working with external security authorities such as the NCSC to provide underwriting of security solutions. Understanding and management of security activities within development, testing and manufacturing environments. Advising development teams on suitable platform lockdown and configurations, and supporting penetration test activities. Analysing penetration test results and preparation of remedial action plans. Identify, communicate and drive through life security management, including but not limited to obsolescence planning, vulnerability and patch management for all products within area of responsibility. Lead security incident management teams during incident/crisis situations in conjunction with Head of Product Security for EW/FCA. Review, maintain and participate corporate product security policies. Deliver product security training to project engineering teams. Essential Skills & Experience Experience in the development of besoke product-based security solutions for a military and/or commercial products and systems. Graduate degree in relevant engineering, computing or related scientific discipline, and/or evidence of further professional study. Full membership of an NCSC recognised professional security body organisation (i.e. CIISec, ISC2 or ISACA). Recent experience and demonstratable knowledge of live and legacy UK/EU/NATO information security standards and frameworks, including the UK MOD Secure by Design framework, GovS 007, HMG IS1&2, ISO27001, NIST SP800-30/37/53, UK MOD Information Security related JSPs, EU CRA and US DoD information security policies. Practical experience of producing technical assurance documentation such as Key Management Plans, Testing Security Instructions, Security Operating Procedures and Security Cases. Knowledge of current cryptographic technologies and key management systems. Understanding of Model Based System Engineering (MBSE) and how Product Security directly inputs into the process. Knowledge and understanding of bespoke product-specific Operating Systems, Firmware and Software security controls and how to apply them. Knowledge of Quantum Cryptography & Quantum Key management. Experience or knowledge of existing threat intelligence sources. Knowledge of NATO security policy, risk management and Accreditation. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Principal Firmware Engineer Based in Luton 12-month contract Paying up to £85p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance Overview: As the Principal Firmware Engineer, you will work with the support of experts in their field, using world-class facilities to deliver Firmware for complex digital systems that meet challenging future customer requirements. Responsibilities: Auto-generating code using model-driven engineering using MATLAB and Simulink tools Design using tools such as Xilinx, TCL, Verilog, System Verilog, and UVM Derivation of detailed Firmware requirements and architecture from system requirements Experience required: Design tools such as Xilinx, TCL, Verilog, System Verilog, and UVM FPGA architectures such as Xilinx 7. Xilinx UltraScale; Intel (Altera) or Microsemi (Actel). Fast interfaces such as PCIe, Ethernet, and JESD A structured approach to firmware design (RTCA DO-254 or similar) Cryptography and anti-tamper techniques Artificial Intelligence including machine learning and genetic algorithms Electronics test methods and equipment Working in mixed discipline teams HNC/HND or Undergraduate Degree (Electronic Engineering, Computer Science, AI, Games Programming, Physics, or Applied Physics) or you may just have lots of skills and experience gained through your hard work.Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Electrician (Sub- Contractor / 18th Edition), paying £23 - £28 p/h negotiable depending on experience levels, normally 8 hour days. Standard working hours on this particular site will be 07.30 - 16.30 Monday to Friday, also if wanted their may be some Saturday work (enhanced payments paid as woud be overtime) You will be a sub-contract self employed Electrician (CIS) who is happy to carry out the installation of containment, trunking & baskets, as the first 5 weeks of this clean room installation project (a building within a building, as in a warehouse facility) is mainly containment fitting then more complex wiring installations / 2nd fixing etc. after that. In this role you must be able to install trapeze support systems & fit baskets, trays & metal trunking, plus have strong experience using Lindapter systems to hang the rods off the ceiling. This role is starting immediately in the Luton / Dunstable area. So if you are immediately available apply today & start Tuesday 7th of July. Your qualifications will be fully up to date & to NVQ Level 3, ECS, AM2, IPAF, CSCS card etc. You will be a customer & quality focused Electrician who works to a "right first time" approach to all works carried out, as it is crucial the fit out is to a high standard. Electrician Attributes: • Up to date certifications (NVQ Level 3, ECS, 18th Edition, AM2 etc.), • Must have IPAF operator certificate & a CSCS card, • You must be highly confident in installing containment, trunking & baskets, as the first 5 weeks of the project is mainly containment fitting then more complex wiring installations / 2nd fixing etc., • You must be able to install trapeze support systems & fit baskets, trays & metal trunking, having experience using Lindapter systems to hang the rods off the ceiling., • You will posses the ability to work independently & as part of a small team, • Strong attention to detail, quality focused & commitment to safety, • Happy to work in the Luton area, on a clean room fit out in a warehouse, • Experienced in reading & understanding electrical / technical drawings, • Own tools & Van required for this role., • Available ASAP to start next week on Tuesday 07/07/26 This electrical role is commutable from Luton, St Albans, .Milton Keynes, Hemel Hempstead, Aylesbury, Leighton Buzzard, Harpenden, Hitchin, Northampton, Bedford, Kettering, Wellingborough, Rushden, Letchworth Garden City, Stevenage, Bishops Stortford & other areas close to these. The client also needs Electrical Improvers who can fit containment & trunking (rates for them roles would be more c.£16-£18p/h) Apply today

Consultant Breast Radiologist – East Lancashire Hospitals NHS Trust.We are seeking an experienced Consultant in Breast Radiology to join East Lancashire Hospitals NHS Trust on a long-term locum basis.Full-time locum contract (initial 12 months, with possible extension).Breast imaging and symptomat

You’ll also be expected to work hands-on when needed, leading by example and helping the team complete jobs to a high standard.

Produce high-quality business requirements, functional specifications, process maps and user stories.

Candidates will ideally have experience in small-to-medium highway and public realm infrastrcutre projects, including pavement reconstruction, road improvments, high street redevelopments, and hard landscaping.

Following the award of an exciting new contract, we’re expanding our team of employed tutors to deliver a high volume of impactful lessons and we’re looking for outstanding educators to join us on the next stage of our journey. Plan and deliver high-quality, personalised lessons aligned to the n

Circa £55,000 + Excellent Benefits.Beach Baker is delighted to be supporting a leading heritage and conservation-focused landowner in the search for an Estate Manager to join their London & Surrey portfolio.This is an exciting opportunity to manage a significant agricultural estate while helping to

We are seeking a Passive Fire Protection Consultant to join an established and highly respected team based in Essex.

Our client, a high profiling technology organisation, urgently require an experienced Technical Director to run a major Maritime programme that they are delivering. This represents an excellent opportunity to secure a long term role, within a high profile and dynamic organisation.

I'm currently working with a highly respected construction consultancy that's looking to strengthen its London team with the appointment of an experienced. This is an excellent opportunity to join a consultancy with a strong reputation for delivering high-quality projects across a diverse client bas

SAP SuccessFactors Senior Consultant - Employee Central and Time.A fantastic new SAP SuccessFactors Senior Consultant role has arisen, within a leading global consulting business.The role will focus on providing Subject Matter Expertise within the Employee Central and Time Management modules of SAP

Our client, a major international trading and investment group with a well-established metals and commodities trading operation in London, is looking for a.This is a genuinely interesting seat: you'll sit at the intersection of trading, risk and finance, independently assessing and reporting on the

Our goal is to change the battlefield in Ukraine through very high-volume production, then deliver proven systems to NATO. High personal drive and tolerance for long, intense work periods.

We're excited to be partnering with a highly respected organisation delivering one of the UK's most ambitious infrastructure and construction investment programmes. Sitting at the heart of a high-profile development portfolio, you'll drive initiatives that create meaningful opportunities for local c

Highly organised with strong attention to detail.

Experience of recruitment systems and ATS implementation is therefore particularly valuable, with knowledge of Tribepad being highly advantageous. Strong end-to-end recruitment experience, ideally within health, social care or another high-volume, multi-site environment.

Working alongside the Site Leadership Team, you will coach leaders, develop high-performing teams and deliver measurable improvements across safety, quality, productivity, cost and customer performance.

Starfish Search are working with a local authority in the North of England to recruit an Interim ERP Business Change Lead to shape and deliver the people, organisation and behavioural change required for a major ERP transformation across Finance, Procurement, HR and Payroll.You’ll lead the busines

The architecture team at Actian works side-by-side with the development team.We need a proactive professional who ensures the product meets three key conditions: it must be.Your goal is to eliminate technical complexity and set the rules of the game so developers can ship new features fast and witho

A strong portfolio demonstrating high-quality game VFX.

You'll have the chance to work on varied and interesting projects, provide meaningful support to clients, and contribute to maintaining the highest standards of radiation protection and compliance. Delivering high-quality consultancy services within agreed timescales.

This is a fantastic opportunity to work on complex, high-impact services where user research genuinely influences how services are designed and delivered. Amber Labs is a people-first technology and digital transformation consultancy, delivering secure and scalable solutions across highly regulated

Leadership: Leads and manages the legal team, ensuring high-quality legal support to the organization while motivating, mentoring, and developing legal staff.

Advanced degree in a highly scientific, quantitative or computational discipline (examples include STEM and Machine Learning). Extraordinary accomplishments in high school and university-level programming competitions including but not limited to: Olympiad Medallists, ACM-ICPC finalists and winners,

High degree of technical competence.

Our client has a proud heritage in helping people secure their financial futures.They're continuing to build on that foundation and are growing their thriving bulk annuity business, partnering with pension schemes to protect members’ retirement benefits.This is a fantastic opportunity to join them

We are looking for an AI/Python developer, who is interested in building out greenfield AI pipelines and workflows.Ideally someone who would be familiar with PHP and Laravel as they will also be responsible for integrating their AI features into the main site.You will be working alongside a small te

Strategic Sourcing Buyer – Aerospace.Essex | Hybrid Working | Competitive Salary + Benefits.Are you a procurement professional with experience sourcing fasteners, engineered components or aerospace materials? Do you enjoy negotiating commercial agreements, building supplier partnerships and drivin

Few exciting opportunities have arisen for High Performing Associate Dentist with lot of private interest at our Bury Knowle practice in the Oxfordshire Area. We are looking to hire a high performing Associate Dentist to join our team at Bury Knowle.

You must be highly credible in front of both client and your colleagues. Provide highly credible and informative thought leadership, based on real life experience. Design and build cloud/technology roadmaps, implementation strategies, transformation plans and high-level architecture.

High attention to detail in maintaining accurate and consistent documentation and adhering to quality standards.

Residential Conveyancer (Remote / Hybrid) – Holiday Cover Team.Unqualified) / £45k–£73k (Qualified).Ever been the one left behind while everyone else sunbathes?.Now you can be the one making holidays.This firm takes cover seriously.When their fee earners go away, they want them to fully switch

Our client is a highly successful, privately owned business operating within the specialist equipment hire sector. Develop and mentor a high-performing operational leadership team. High energy, dynamism and a proactive approach.

As a highly people focussed business in every possible way, the position is varied and will include responsibility for general employment legal matters, support for HR, advice on policies and procedures, TUPE, grievance and disciplinary matters as well as drafting and implementing appropriate preced

Russell Publishing has an exciting new role for a Lead Generation Coordinator to join and coordinate the delivery of Lead Generation activities ensuring excellent customer experience across all brands.The ideal applicant will have 1 year of experience working in lead generation management or custome

You’ll sit within a highly collaborative Data team and act as a key partner to Product, Engineering, and Commercial teams, using data to shape strategy, improve personalisation, and create a best-in-class experience for millions of users.

Proven leadership in a high-volume, multi-unit food & beverage setting. Partner with purchasing and operations to ensure high-quality, cost-effective ingredients are used.