Trabajos maintenance technician en San Jose, CaliforniaCrear alertas

Job Description Position Summary We are seeking an experienced and self-motivated Pool Repair Technician to diagnose, repair, and maintain residential and commercial swimming pool equipment. The ideal candidate has hands-on expertise with Pentair, Jandy, and Hayward product lines and is proficient in programming variable speed pumps, Pentair IntelliCenter automation systems, and Jandy iAquaLink control systems. This role requires strong troubleshooting skills, excellent customer service, and the ability to work independently in the field. Essential Duties & Responsibilities Equipment Repair & Maintenance • Diagnose and repair pool pumps, filters, heaters, salt chlorine generators, chlorinators, and lighting systems across Pentair, Jandy, and Hayward platforms., • Perform scheduled preventive maintenance on all pool and spa equipment, including chemical balancing, filter cleaning, gasket replacement, and O-ring servicing., • Identify and repair plumbing leaks (both pressure-side and suction-side), replace valves, and re-plumb equipment pads as needed., • Rebuild and replace pump motors, impellers, seals, and bearings., • Service and repair gas and electric heaters, including heat exchangers, ignition systems, and thermal regulators. Automation & Variable Speed Pump Programming • Program and configure Pentair IntelliCenter systems, including pump schedules, chemistry automation (IntelliChem), lighting scenes, water features, and remote access via the ScreenLogic app., • Install, program, and troubleshoot Jandy iAquaLink systems, including RS communication setup, device configuration, firmware updates, and mobile app connectivity., • Set up and optimize variable speed pumps (Pentair IntelliFlo/SuperFlo VS, Jandy VS FloPro/ePump, Hayward Super Pump VS/TriStar VS) for energy efficiency and proper flow rates., • Configure pump speed schedules, priming cycles, freeze protection, and flow-based override settings., • Troubleshoot communication errors between automation systems and peripheral equipment (pumps, heaters, chlorinators, valves, lighting). Diagnostics & Troubleshooting • Use multimeters, amp clamps, pressure gauges, and flow meters to diagnose electrical and hydraulic issues., • Read and interpret wiring diagrams and schematics for Pentair, Jandy, and Hayward equipment., • Perform voltage, amperage, and resistance testing on motors, relays, circuit boards, and control panels., • Identify and resolve communication faults on RS-485 networks used by IntelliCenter and iAquaLink systems. Customer Service & Documentation • Communicate clearly with homeowners and property managers regarding diagnoses, repair options, and cost estimates., • Provide written service reports and document all work performed, parts used, and system configurations., • Educate customers on proper equipment operation, automation features, and basic maintenance practices., • Maintain a professional appearance and keep the job site clean upon completion of work.

Job DescriptionDescription: Description About the Role The Mobile Service Coordinator reports directly to the Service Manager and plays a critical role in supporting the daily operations of the Mobile Service Department. This position is responsible for coordinating workflow, ensuring timely and effective customer communication, supporting technicians, and maintaining accurate repair documentation, billing, and invoicing processes. The Mobile Service Coordinator works closely with the Service, Parts, Warranty, and Sales Departments, as well as company leadership, to support operational objectives, enhance customer satisfaction, and drive continued growth of mobile service operations. Key responsibilities include scheduling repairs, preparing estimates, monitoring repair order (RO) status, maintaining technician timekeeping records, processing invoices, and assisting with customer payments. This role is essential to ensuring the smooth, efficient, and professional flow of mobile service operations while delivering high-quality customer service. The Mobile Service Coordinator maintains ongoing communication and collaboration with: • Service Manager, • Director of Mobile Service, • Mobile Service Technicians, • Parts Counter Personnel, • Warranty Coordinators, • Sales Department, • Customers, • Company Leadership and CCTE Executives Strong cross-functional collaboration is essential to support efficient repair operations, technician scheduling, and customer satisfaction. Essential Duties and Responsibilities Operations Responsibilities • Meet daily with the Service Manager and service department stakeholders to establish repair strategies based on overnight notes, dispatch sheets, and job priorities., • Assign work to technicians based on skill level, certifications, workload, and availability., • Schedule daily mobile service work to ensure optimal technician utilization and customer responsiveness., • Utilize Decisiv daily to maintain accurate repair status updates and communication on active work orders., • Monitor repair progress to ensure estimated completion times and customer commitments are met., • Open and process warranty claims using systems such as Eaton Real Time, Cummins RapidServe, and other OEM platforms., • Obtain required customer authorization, signatures, and contact information prior to starting repair work., • Accurately document all customer concerns, complaints, and repair requests on repair orders., • Maintain daily communication with customers regarding estimates, repair progress, and service updates., • Proactively communicate changes in completion times, revised estimates, or additional repair needs., • Open, prepare, and process mobile service repair orders accurately and efficiently., • Recommend invoice adjustments to the Service Manager when necessary., • Coordinate with the credit department to maintain proper account status (MSR) for all repair orders., • Verify warranty and recall status and attach supporting documentation to repair orders., • Ensure all required customer and vehicle information is obtained prior to creating repair orders., • Assist with collection of payments for completed repairs., • Review technician write-ups for accuracy, completeness, and proper documentation., • Ensure all repair orders are completed, closed, and processed within 48 hours., • Reconcile technician payroll and timekeeping records on a daily basis., • Ensure all cores are returned to the parts department and all warranty parts are properly tagged and stored., • Distribute technical updates, service bulletins, and product information to technicians., • Maintain the cleanliness, readiness, and proper operation of mobile service tools, equipment, and vehicles., • Coordinate with the Service Manager and Director of Mobile Service regarding staffing, technician needs, and fleet requirements., • Assist in interviewing, hiring, and onboarding Mobile Service Technicians., • Conduct technician performance evaluations and support development plans, training needs, and wage recommendations., • Coordinate with the parts department to manage repair orders awaiting parts availability., • Support the Service Manager in identifying and maintaining technician training requirements., • Ensure adherence to dealership labor standards and repair procedures using systems such as Mitchell., • Assist in developing departmental goals, forecasts, and operational objectives., • Conduct regular customer visits to strengthen relationships and support service growth., • Ensure compliance with all federal, state, and local regulations including OSHA, hazardous waste disposal, MSDS/SDS requirements, right-to-know laws, and workplace safety standards. QualificationsKnowledge, Skills, and Abilities • Ability to read and interpret documents such as safety rules, operating instructions, maintenance manuals, and policy procedures., • Ability to review operational reports and communicate action plans effectively to staff., • Strong verbal and written communication skills with the ability to interact professionally with customers and employees., • Ability to perform basic mathematical functions including addition, subtraction, multiplication, and division using whole numbers, fractions, and decimals, • Frequently exposed to moving mechanical parts and outdoor weather conditions., • Occasional exposure to wet or humid environments, elevated areas, fumes, and airborne particles., • Work environment noise level is typically moderate. Cognitive and Physical Demands • Ability to read and comprehend instructions, correspondence, and memos., • Ability to communicate effectively in individual and group settings., • Ability to perform basic mathematical calculations and interpret data., • Ability to apply common sense understanding to written, oral, and diagram-based instructions., • Frequently required to stand, walk, use hands, reach, climb, balance, stoop, kneel, crouch, crawl, and communicate verbally., • Frequently required to lift or move parts up to 10 lbs., • Occasionally required to lift up to 50 lbs independently., • May be required to team lift items up to 100 lbs., • Must have vision abilities including close, distance, color, peripheral vision, depth perception, and focus adjustment. Customer Service Responsibilities • Greet customers in a friendly, professional, and timely manner., • Obtain required customer authorization, signatures, and contact information prior to starting repair work., • Accurately document all customer concerns, complaints, and repair requests on repair orders., • Maintain daily communication with customers regarding estimates, repair progress, and service updates., • Proactively communicate changes in completion times, revised estimates, or additional repair needs., • Open, prepare, and process mobile service repair orders accurately and efficiently., • Recommend invoice adjustments to the Service Manager when necessary., • Coordinate with the credit department to maintain proper account status (MSR) for all repair orders., • Verify warranty and recall status and attach supporting documentation to repair orders., • Ensure all required customer and vehicle information is obtained prior to creating repair orders., • Assist with collection of payments for completed repairs. Education and Experience • Minimum of two (2) years of experience in a heavy-duty truck dealership environment, including service department operations., • Strong customer service and interpersonal skills., • Proven ability to build and maintain strong relationships with customers and employees., • Demonstrated ability to motivate and support technician teams., • Proficiency in Microsoft Office (Word, Excel, Outlook)., • Experience with Dealer Business Systems (DBS) and related service software preferred. Working Conditions • Frequently exposed to moving mechanical parts and outdoor weather conditions., • Occasional exposure to wet or humid environments, elevated areas, fumes, and airborne particles., • Work environment noise level is typically moderate. Cognitive and Physical Demands • Ability to read and comprehend instructions, correspondence, and memos., • Ability to communicate effectively in individual and group settings., • Ability to perform basic mathematical calculations and interpret data., • Ability to apply common sense understanding to written, oral, and diagram-based instructions., • Frequently required to stand, walk, use hands, reach, climb, balance, stoop, kneel, crouch, crawl, and communicate verbally., • Frequently required to lift or move parts up to 10 lbs., • Occasionally required to lift up to 50 lbs independently., • May be required to team lift items up to 100 lbs., • Must have vision abilities including close, distance, color, peripheral vision, depth perception, and focus adjustment. Requirements:

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc240045

Job DescriptionWe are looking to hire a trustworthy and reliable pool service technician to service and maintain our customers' swimming pools for our location in Los Gatos, CA. As a pool technician, your duties will include driving to the customers' location, testing the pool water chemistry, adding chlorine, acid, and other chemicals to balance the levels in the water. Cleaning out, netting, brushing, skimming pools; cleaning skimmer & pump baskets. To ensure success as a pool service technician, you should have excellent knowledge of swimming pool chemistry and maintenance, be able to work with hazardous chemicals and interact with clients in a friendly and professional manner. What's in it for you: • Medical Insurance, • Paid time off & Sick time., • IRA retirement option with employer match for Full-time employees., • Bonus potential., • Career development and upward growth available.Pool Service Technician Responsibilities:, • Driving the company vehicle to the customer’s location., • Maintaining equipment and chemical stock levels on-site and in the vehicle., • Testing swimming pool water chemical levels., • Adding acid, chlorine, and other chemicals to keep water levels balanced., • Cleaning swimming pool using authorized equipment., • Fixing cracks or leaks in the swimming pool structure., • Servicing and fixing faulty pool cleaning equipment., • Completing paperwork and reporting service requirements to management.Pool Service Technician Requirements:, • High school diploma., • Minimum 3-4 years previous experience as a pool service technician required., • Knowledge of proper pool cleaning and maintenance methods., • Extensive knowledge of swimming pool chemicals and their properties., • Ability to lift heavy equipment., • Ability to work in all weather conditions., • Professional appearance., • Must pass a background check., • Clean driving record.

Job DescriptionJob Summary We are seeking a dependable and consistent Pool Service Technician to join our team. In this role, you’ll service residential swimming pools on a weekly route by testing and balancing water chemistry, brushing and netting debris, emptying baskets/bags, and confirming equipment is operating properly. Start time is 8:00am. Weekdays required; occasional weekend work required as needed. This is a fast-paced, outdoor position that requires basic math, strong consistency, and clear communication with the office and lead technician. Key Responsibilities • Service a daily route of residential pools with consistent, high-quality workmanship, • Test pool water and add chemicals accurately according to company standards, • Perform routine cleaning tasks including:, • Brushing pool surfaces, • Netting debris, • Emptying skimmer and pump baskets, • Emptying/cleaning pool sweep bags (when applicable), • Operate pool equipment as needed (turn system on/off, confirm circulation/flow, basic checks), • Perform basic equipment checks and report issues immediately (examples: low flow, leaks, air in system, unusual noises, broken lids/baskets, equipment not running), • Complete service documentation each visit (water readings, chemicals added, tasks completed, notes/photos when needed), • Communicate promptly with the office/lead tech about pool issues, missed access, unsafe conditions, animals, or anything affecting service quality or scheduling, • Maintain a clean, stocked service vehicle and handle supplies responsibly, • Must be able to lift up to 50 lbs, perform repetitive brushing, and work outdoors in varying weather conditions.Qualifications / What We’re Looking For, • Reliable attendance and punctuality (this role depends on consistency), • Comfortable working outdoors in heat/cold and performing physical work (walking, lifting, bending, brushing), • Strong attention to detail (cleanliness, water chemistry accuracy, completing checklists), • Basic math skills (measuring and multiplying dosages accurately), • Good observation skills (dirty areas, algae starting, odd equipment sounds, low water level, etc.), • Strong communication and professionalism with customers and team, • Valid driver’s license and clean driving recordWork Style / Expectations, • Works independently on a route, but stays connected with the team through consistent updates, • Follows company SOPs and treats each pool like it’s the standard for the whole business, • Takes pride in clean, safe pools and accurate chemical work

Job Description Mr. Pool is hiring a reliable and motivated Pool Service Technician to manage a residential service route in the San Jose area. Technicians service approximately 15–20 pools per day, depending on experience and performance. We are looking for someone who works efficiently, takes pride in quality, and operates independently while maintaining strong customer service standards. This is a growth-focused position with long-term opportunity as the company continues to expand. Company DescriptionMr. Pool is a licensed and insured residential pool service company based in San Jose, California, proudly serving homeowners throughout Santa Clara County for over 18 years. We specialize in professional pool maintenance and equipment repair, built on reliability, clear communication, and consistent high-quality service. With an established customer base and a strong reputation in the community, we are a growing local company focused on long-term relationships and creating a stable, performance-driven work environment for our team.Mr. Pool is a licensed and insured residential pool service company based in San Jose, California, proudly serving homeowners throughout Santa Clara County for over 18 years. We specialize in professional pool maintenance and equipment repair, built on reliability, clear communication, and consistent high-quality service.\r\n\r\nWith an established customer base and a strong reputation in the community, we are a growing local company focused on long-term relationships and creating a stable, performance-driven work environment for our team.

Job Description Overview Automotive and Diesel Mechanic/Technician – Santa Clara, CA $37.00 - $47.50 hr | Weekly Pay | Full Benefits within 30 Days | **Potential Bonus up to $5,500 Amerit Fleet Solutions, a leader in fleet maintenance across the U.S., is hiring a skilled Fleet Automotive/Diesel Technician to join our team in Santa Clara, CA. The Fleet Technician/Mechanic is responsible for the timely repair and maintenance of light to medium duty fleet vehicles to ensure a safe and efficient operation. Heavy Automotive Fleet (Ford, Chevy, Dodge - 1 Ton Trucks) for the Telecom industry. We also have small diesel engines, and generators. If you enjoy troubleshooting mechanical issues and keeping fleet vehicles running reliably, this is a great opportunity to grow your career with a stable national company. Pay & Schedule Pay: $37.00 – $47.50/hour (based on experience) Pay Frequency: Weekly pay – every Friday Schedule: Monday - Friday: 7:00am - 3:30pm Why Technicians Choose Amerit ✔ Weekly Pay – Reliable paycheck every Friday ✔ Benefits Start Fast – Medical, dental, vision within 30 days ✔ 401(k) Match – Plan for your future ✔ Paid Time Off – Vacation, holidays, and sick time ✔ Boot Allowance & Safety Gear Reimbursement ✔ Training Through Amerit University ✔ ASE Certification Reimbursement & Bonuses ✔ Employee Referral Bonuses (Up to $500) ✔ Career Advancement Opportunities Nationwide What You’ll Do • Perform preventive maintenance and repairs on light to medium duty fleet vehicles, • Diagnose mechanical and electrical issues, • Conduct inspections to ensure vehicles meet safety and compliance standards, • Accurately document repairs and complete work orders, • Maintain a clean and organized work area, including your tools and equipment, • Follow all safety procedures and company policies, • Collaborate with supervisors and team members to support fleet operations What We’re Looking For • 5+ years’ of hands-on experience performing automotive vehicle maintenance and repairs, • Strong diagnostic and troubleshooting skills, • Valid driver’s license, • Ability to own and maintain the personal tools and toolbox required for the role, • Ability to work effectively both independently and as part of a team, • Willingness and ability to meet the physical demands of the position (detailed below), • Must be eligible to pass standard pre-employment screenings, including drug screen and DOT physical (if required) Working Conditions This role involves working in a mobile, outside and/or shop environment with exposure to dust, diesel fumes, noise, and mechanical materials such as oils and greases. Technicians must be able to perform essential job functions that include frequent movement such as standing, walking, climbing, bending, and sitting for extended periods, as well as lifting heavy objects and accessing tight or confined spaces. This position requires regular use of hands to grasp, reach, handle, and operate tools and equipment. Technicians may be required to work at heights using ladders or elevated platforms and must be able to safely perform duties in various weather conditions. Due to the active work environment and movement of large vehicles, the ability to see and hear sufficiently to safely navigate the workspace is required. Reasonable accommodations may be made to support individuals with disabilities in performing essential job functions. Ready to Join a Growing Team? Apply today to join Amerit Fleet Solutions and build a career with a company that values safety, reliability, and skilled technicians. https://www.ameritfleetsolutions.com/careers/easy-apply #Mechanic #Hiring #AutomotiveMechanic #NowHiring #AutomotiveTechnicianCareer #MechanicJobs #AutoTechnician INDCD

Job Description Monarch Isuzu Truck Center of San Jose, California is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Job Description HVAC Technician Do you enjoy challenges and take pride in solving problems? Are you passionate about keeping people comfortable in their homes and businesses? We're not just another HVAC company - we're a one-stop service solution for the multifamily industry serving families both inside and outside our organization. 1-Hour HVAC is looking for skilled and dependable HVAC Technicians to join our growing company. This is your chance to join a team that lives by our core values: Unity, No Gossip, Winners Win, Relentless Servant Mentality, Integrity, and Extreme Accountability. The Perks of Being Part of the Family We believe in empowering our team members to reach their full potential. That's why we invest heavily in development. You'll have opportunities to attend workshops and trainings to stay ahead of the curve and develop your skill set. We empower our team members by fostering a culture of learning and advancement, with opportunities for internal promotions and skill-building initiatives. This commitment to Winners Win ensures our entire team has the tools and knowledge to succeed. We offer a benefits package including medical, dental, vision, paid holidays, and a Financial Wellness Program to help you achieve your financial goals. But the real benefits are the people and the positive, collaborative culture we've built! In this role, you will: • Diagnose, troubleshoot, and repair a variety of HVAC systems, • Perform preventative maintenance to ensure efficient operation, • Install new HVAC equipment, • Provide excellent customer service and ensure a positive experience for every client, • Work independently and as part of a team To qualify, you should have: • A minimum of 3 years of experience in HVAC field, • A strong understanding of HVAC systems, • Excellent problem-solving and troubleshooting skills, • The ability to work independently and as part of a team, • A valid driver's license, • Excellent communication and customer service skills, • EPA License required for HVAC, • Proficiency with basic technology, including smartphones, tablets, and computers, is essential. Candidates must be comfortable using softwares for timekeeping (including clocking in/out from various locations and adding job-specific notes), job management (updating progress, reviewing scopes, and uploading photos), and email communication. Ready to join a winning team? We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Applications will not be considered without a current Resume.

Job DescriptionTITLE: MechanicPOSITION TYPE: Full Time, Non-ExemptCOMPANY: Sharks Sports and Entertainment, LLCLOCATION: Sharks Ice at San Jose – Building OpsREPORTS TO: Operations ManagerPOSTING DATED: June 4, 2026Pay Range: The pay range for this role is $27-28.50 per hour Position OverviewSharks Ice at San Jose is seeking a highly skilled, dependable, and hands-on Mechanic to support one of the largest and busiest ice rink facilities in the country. This position is responsible for the reliability, safety, and performance of all ice resurfacing equipment and related arena systems. The ideal candidate brings strong mechanical knowledge and expertise, excellent troubleshooting skills, and pride in doing things the right way. This position plays a critical role in maintaining a world-class facility with the best ice, staff training, equipment uptime, and overall facility operations. Essential Duties and Responsibilities:Perform safe operation, inspection, and maintenance of ice resurfacers, ice edgers, chippers, and related arena equipmentConduct and document routine preventative maintenance, including blade changes, oil changes, lubrication, and scheduled serviceDiagnose and repair mechanical, hydraulic, propane, electrical, and control system issuesExecute major and emergency repairs efficiently to minimize downtimeRespond to urgent equipment issues during off-hours as needed to support operationsMaintain parts inventory and orders critical parts & suppliesProvide initial and ongoing training for Ice Technicians on equipment operation, safety, and standard operating proceduresEstablish and maintain clear communication across Ice Technicians, Supervisors, and ManagementWork closely with management to develop action plans and ensure consistent execution of SOPsServe as Building Supervisor while on duty when required, supporting overall facility and event operationsDeliver professional, solutions-based service at all timesAssist with general facility maintenance and arena upkeep as neededEnsure compliance with safety policies, emergency procedures, and evacuation protocolsAnticipate mechanical issues and proactively recommend solutionsPerform additional duties as assigned to support rink operationsQualificationsValid California Driver's License3–5+ years of hands-on mechanical experience (industrial, heavy equipment, fleet, or facility maintenance preferred)Strong working knowledge of:Internal combustion engines (propane preferred)HydraulicsElectrical systems and diagnosticsAbility to troubleshoot independently and work effectively under pressureStrong communication skills and a team-first mindsetCertified Ice Technician (CIT) – US Rink Association (Preferred)Experience operating heavy equipment or warehouse machinery (Preferred)Physical RequirementsAbility to bend at the waist, reach overhead and lift up to 60 lbs with or without accommodationAbility to stand, walk, and work on concrete and ice surfaces for extended periods with or without accommodationAbility to crawl, reach and lay under ice resurfaces or other essential equipment with or without accommodationComfortable working in cold environmentsFlexibility to work extended hours including nights, weekends, and holidays as required by rink operations (all with advance notice)May be required to travel to other company locations What We OfferCompetitive compensationMedical/Dental/Vision/Flexible Spending Accounts (all LGBTQ+ friendly)Pretax Transportation Benefit401K (pre-tax and Roth options)Generous Paid Time Off PolicyMinimum of 10 Paid Holidays and Wellness Days per yearAn inclusive culture which values diversity of background and a passion to improve our SSE's commitment to change with impact on our community and industry.This position is not eligible for U.S. work authorization sponsorship. Summary:Born in 1991, Sharks Sports and Entertainment ("SSE") has grown into a multi-faceted organization that includes the SAP Center, the NHL San Jose Sharks, the AHL San Jose Barracuda, the Tech CU Arena, three Sharks Ice facilities, and the non-profit Sharks Foundation. Additionally, we are growing our organization through expansion in the Bay Area and surrounding communities in Northern California. We work and play in the Bay Area, and are deeply influenced by the technology, innovation, diversity, and commitment to excellence that surrounds us. Our culture is transforming to reflect those values, with an eye towards a pioneering, forward-thinking, and inclusive environment in sports and entertainment. We live, work, and innovate by a set of Pioneering Principles: T – Team success is more important than individual successE – Exceptional experience is non-negotiable in everything we doA – Appreciate others for their diversity and opinions M – More risk leads to more rewards and expands our comfort zones T – Trust that all teammates have the best intentionsE – Empower all teammates to make informed decisionsA – Always say what you really mean and do what you sayL – Lead by showing the respect to others you expect from them We strive to unite people through a shared love of ice sports, entertainment, and our hometown. We are #TealTogether. Our Commitment to Diversity, Inclusion & BelongingHere at Team Teal, we recognize and celebrate that individuals come with a wealth of experience and talent well beyond any list of required skills and qualifications – in fact, we believe diversity of backgrounds and skills, combined with passion, are the most important keys to meaningful innovation and excellence. Therefore, we encourage people from all backgrounds to apply to our positions. Please let us know if you require accommodations during the interview process. Equal Opportunity EmployerSharks Sports and Entertainment is an equal opportunity employer. We accept our responsibility to make employment decisions without regard to race, religious creed, color, age, sex, sexual orientation, gender identity, gender expression, national origin, marital status, medical condition as defined by state law (genetic characteristics or cancer), physical or mental disability, military service or veterans' status, pregnancy, childbirth and related medical conditions, genetic information, or any other classification protected by applicable federal, state, and local laws and ordinances. Notice to Recruiters and AgenciesSSE recruits candidates directly, rather than through third-party recruiters or agencies. Under no circumstances will SSE pay a fee for candidates submitted or presented without a signed recruiting agreement in place between SSE and the recruiter or agency prior to the submittal; any submittal must be for requisition specifically and individually assigned in writing by SSE's HR department. In the case of candidate(s) submitted or presented to SSE by a recruiter or agency without a signed agreement AND written assignment by SSE Human Resources, SSE explicitly reserves the right to pursue and hire those candidate(s) with no financial obligation to the recruiter or agency. Job Posted by ApplicantPro

Job Description Overview With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunities for career growth. We invest in our technicians by offering: • Competitive Compensation: Hourly UNION pay $23-$26hr, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: UNION Benefits, • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities JOB SUMMARY This position is responsible to assist in the repair and overhaul equipment, refrigeration, heating and ventilation equipment to ensure customer needs are met efficiently, accurately and on-time. Install equipment, in accordance with project requirements and under direction of a senior technician: o Apprentice 1–HVAC: air handler drains, piping for split systems, overhead duct hangers and duct work, etc. o Apprentice 1–Refrigeration: display case drains, walk in box drains, overhead hangers and piping, etc. · Perform all assigned work in a safe and responsible manner. Use power and hand tools, powered vehicles, machinery, and PPE as directed and required by Source, customer, and contract policy. · Escalate problems and concerns (safety, quality of work, etc.) to on-site senior technicians or project managers promptly. · Maintain clean and professional jobsites/work areas at all time. Properly store, disassemble, or remove all spare and waste materials created on assigned jobsites. · Provide assistance and support to senior technician/s on a job. · Carry out all responsibilities in an honest, ethical and professional manner. · Perform other duties as assigned. Qualifications · Education or experience equivalent to a High school diploma, GED, or completion from trade program or technical school. · 1+ years of experience in the construction, refrigeration, HVAC, or other related industry/trade preferred. · Ability to operate a scissor lift or forklift preferred. · Knowledge of jobsite safety, ability to perform work in accordance with safe work practices and rules. · Ability to use basic power and hand tools including drills, fuel gas tools, electrical meters, measurement tools, etc. · Ability to be punctual and dependable. · Ability to work in a variety of working conditions, including scaling ladders to various heights, outdoors in hot/cold temperatures, in noisy environments, etc. · Ability to perform basic mathematical calculations including fractional addition/subtraction, multiplication, division, and measurements. · Ability to read, write and communicate timely, clearly and concisely. · Ability to work constructively in a team environment and follow instructions from senior technician. · Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. · Good driving record.

Job Description Overview HVAC Training Technician- Paid Training Program for Entry Level! WE ARE HIRING for our San Jose Service Center! Start a New Career This Fall: HVAC Training Technician Program Begins October Are you a career-oriented individual who is hungry and wants to take your career to the next level by Having Fun and Enjoying the Moment! Service Champions Heating and Air Conditioning is looking for enthusiastic and driven Entry Level Field Service Technicians. This is an exciting full time opportunity! We Have Been Voted A San Francisco Bay Area Top Workplace Each Year Since 2016! Service Champions has always been about the people. You are providing our clients with great service and our “Trustworthy, On Time and Worry Free” brand promise. Service Champions has always found a passion in helping our people become the best that they can be and providing growth opportunities for exceptional teammates! No previous residential HVAC experience is necessary for this position, but is sure doesn’t hurt! We are hiring for attitude and training for skill. When you join our team, you go through a 8-week paid technical training program in our Champions University training center and lab in Pleasanton, CA. Experience with heavy customer service, sales, solar, plumbing, electrical, roofing, auto mechanic, labor or landscaping—transfers well to this entry level position. What's In It For Me? • Market Value Compensation, • Up to 3 weeks Paid Vacation, • Paid Birthdays off, • Health, Vision, and Dental plans for you and your family, • 401k Retirement Plan with company match up to 30%, • Life insurance and accident insurance, • Special Program Options: FSA & EAP, • Referral Bonuses and Employee Discounts Program, • Continuous Training for your Professional Development & Life Skills Courses, • EPA and NATE Training and Testing, • Uniforms and Uniform Laundering – Work Boot Allowance, • Tools and Equipment Provided, • Company Vehicle & Gas Card, • Company issued iPad & iPhone Responsibilities What Will I Do? • Drive Top Performance by performing routine maintenance on residential heating and air conditioning systems, • Operate a variety of hand and power tools to inspect repair, and conduct maintenance on furnaces, condensers and compressors, • Build client relationships by Giving Remarkable Service with strong communication and customer service skills, • Be Kind and Encouraging by educating clients on their systems and maintenance requirements, • Identify opportunities for clients to improve their home comfort systems, • Document service performed and recommendations made by completing applicable forms, reports, logs and/or records, • Complete all tasks in accordance with Service Champions quality and safety standards and Honor Our Commitments, • Update job knowledge by Being a Life Long Student and participating in educational opportunities Qualifications Do I have What It Takes? • Mechanical aptitude, • Ability to work in hot, cold, wet climates depending on the weather, • Ability to crawl in tight places and climb ladders; work in attics, garages, crawl spaces and on roofs, • Integrity and ability to promote a positive company image, • Provide exceptional customer service while on the job site, • Ability to perform physically demanding tasks on a daily basis, • Results driven in a high-energy environment, • Attention to detail, • Must be able to follow directions and work independently After receiving a conditional offer of employment we will run a background check, drug test, MVR and reference check. Annualized potential compensation based on individual performance: $50,000 - $65,000 Wrench Group and its affiliates are proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, genetic information, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The company encourages all qualified candidates who are eligible to work in the United States to apply, but it does not sponsor applicants or employees who require a visa to work legally. #SCNLI #Li-JN1

Job DescriptionTire Installer Technician Schedule: Full-time 7:00 am - 5:30 pm About Us If you're looking for an opportunity to be appreciated and involved in your career, your search is complete. At Stevens Creek Toyota, we have a great history of providing excellent career opportunities for sharp, energetic people. We believe our greatest asset is our team. Located in the heart of San Jose, we are more than just a dealership; we're a close-knit community dedicated to excellence. Our success is built on fostering a culture where every team member is valued, supported, and allowed to grow. We are a destination for customers who expect top-tier service, and we achieve this by empowering our employees to build lasting relationships and take pride in their work. If you're an ambitious, energetic individual seeking a career path with a supportive team and opportunities for advancement, you'll find your home here. Position Overview We are looking for a hardworking and reliable Tire Installer Technician to join our service team. In this role, you will specialize in tire maintenance, replacement, and repair, ensuring our customers have a safe and smooth driving experience. The ideal candidate is energetic, detail-oriented, and comfortable working in a fast-paced shop environment. Key Responsibilities Mount, balance, and install tires on customer and dealership vehicles safely and efficiently. Perform tire rotations, flat tire repairs, and computerized wheel balancing. Inspect tires for uneven wear, damage, and tread depth, reporting findings to Service Advisors. Set tire pressures to manufacturer specifications and reset Tire Pressure Monitoring Systems (TPMS). Safely operate automotive lifts, tire mounting machines, and wheel balancers. Assist in organizing and maintaining the tire inventory and storage areas. Maintain a clean, safe, and organized work environment, following all shop safety protocols. Required Qualifications High School Diploma or GED equivalent. Valid driver’s license and a clean driving record. Physical ability to consistently lift and move heavy tires (up to 50+ lbs) and stand for extended periods. Basic understanding of automotive maintenance and a strong commitment to workplace safety. Excellent team player with a positive attitude and strong work ethic. Eagerness to learn and follow specific repair procedures and specifications. Preferred Qualifications Previous experience in tire installation or general automotive maintenance. Experience operating tire mounting and balancing equipment. Familiarity with Tire Pressure Monitoring Systems (TPMS). Compensation & Benefits Medical, Dental, and Vision insurance. 401(k) Plan with company match. Paid Time Off (PTO) and paid union holidays. Opportunities for career advancement and ongoing training (great stepping stone to a Lube Tech or Main Shop Tech role). Employee Discounts on vehicles, parts, and service.

Job DescriptionJob SummaryWe are seeking a full-time and/or part-time position for Commercial Kitchen Fryer and Equipment Cleaner / General Laborer to join our team. In this role, you will support worksite operations through general labor, cleaning deep fryers and kitchen equipment, and other janitorial activities. Our technicians run a consistent route daily servicing commercial kitchens. We provide filtration services of deep fryer cooking oil and deep cleaning of kitchen equipment. This may include using our equipment to clean kitchen equipment, operating power tools, keeping the worksite clean, operating our vehicles in safe manner to get to job site locations, or other necessary tasks. This role requires a dependable, independent hard-working individual with the ability to meet the physical demands of the job. Since 1996, the Filta Group has been providing unparalleled service to commercial food establishments (i.e., restaurants, corporate kitchens, stadiums, convention centers, hospitals, hotels, Universities, or anywhere a commercial kitchen exists.) Pay starting at $21.00 per hour. Overnight shift (6:30 pm - 3:00am) with 30-40 hours expected per week. We provide the required training for using our equipment and cleaning kitchen equipment in order to perform the services necessary for the job. Cleaning Service Technician Responsibilities: • Show up on time to work appointments, • Routine cleaning of restaurant and large facility fryers and kitchen equipment, • Regular care and maintenance of cleaning equipment, • Driving our vehicles in a safe manner to service customers, maintain regular cleanliness and perform safety checks on vehicle, • Keep inventory of supplies and materials on company van / truck, • Report any unsafe conditions or equipment in need of repair, • Other manual labor tasks as required by the foreman or supervisor, • Communicating with clients and supervisor on cleaning visits Cleaning Service Technician Qualifications: • Ability to meet the physical demands of the job, including lifting up to 75 lbs, and standing for long periods, • Valid California driver's license and a clean driving record, • Strong attention to detail, • Ability to work independently at a high level, • Ability to adhere to all safety rules and regulations, • Bilingual (Spanish / English) a definite plus, but not a must, • At least 1 year of commercial cleaning or kitchen experience, • Live (or are planning to relocate soon) to the San Jose, CA areaYou are applying for work with a franchisee of Filta Environmental Kitchen Solutions, not The Filta Group, Inc. or any of its affiliates. If hired, the franchisee will be your only employer. Franchisees are independent business owners.

Job Description About the Company Foxconn Industrial Internet (Fii) is a world-leading provider of design and manufacturing services for communication network equipment, cloud infrastructure, precision tools, and industrial robotics. Fii delivers intelligent manufacturing solutions for next-generation electronic products, powered by an Industrial Internet platform. Job Function: The SMT Feeder Setup Technician is responsible for preparing, setting up, and maintaining feeders used in Surface Mount Technology (SMT) production lines. This role ensures accurate component loading, feeder verification, and timely support to meet production schedules while maintaining quality and efficiency standards. Shift: Day / Swing Job Type: Full-Time Responsibilities: Prepare and set up SMT feeders according to production schedules, work orders, and BOM requirements Load, verify, and stage components (reels, trays) to ensure correct part numbers and quantities Perform feeder validation and ensure proper configuration before line setup Support SMT line changeovers to minimize downtime and improve efficiency Monitor feeder performance and troubleshoot issues such as misfeeds or jams Maintain feeder inventory, labeling, and organization (kitting/staging areas) Ensure all materials are handled in compliance with ESD and quality standards Coordinate with Production, PM, and Warehouse teams to ensure material readiness Perform basic preventive maintenance and cleaning of feeders Accurately document setup activities and report discrepancies or shortages Skills: SMT feeder setup & material verification BOM and work order interpretation ESD compliance & component handling Basic troubleshooting (feeder jams/misfeeds) Attention to detail & organization Team collaboration in production environment Qualifications: High school diploma or equivalent required 1–3 years of experience in SMT, PCBA manufacturing, or electronics assembly preferred Basic understanding of SMT processes, feeder types, and component handling Ability to read work orders, BOMs, and production documentation Familiarity with ERP or Shop Floor Control (SFC) systems is a plus Strong attention to detail and organizational skills Ability to work in a fast-paced production environment Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR N8yGfCCDIj

Job Description Position Title: Fleet Operations Data Collection Duration: 6 Months + Pay Rate: $30 - $35 /hr on W2 Location: Sunnyvale, CA Project Deliverables We are looking for support for a data collection project. The primary objective is to maintain the integrity of the data collection process by manually operating a vehicle including by following precise routes, ensuring system uptime, and performing basic hardware troubleshooting in the field Detailed Project Description: • Data Acquisition: Manual operation of an EV for up to 8 hours per day, strictly adhering to predetermined routes and structured collection protocols., • System Health Monitoring: Comprehensive pre- and post-trip inspections of specialized onboard hardware (Cameras, LiDAR, and secondary sensors)., • Technical Triage: Basic field maintenance, including power-cycling systems, reseating data connectors, and ensuring all sensors remain clean and unobstructed., • Operational Compliance: Ensure data is logged correctly and uploaded according to project requirements., • Reporting: Reporting/ documentation of any system anomalies, hardware issues, or unique environmental observations.Project Eligibility Criteria, • Driving Record: Valid U.S. Driver’s License (3+ years) with a clean driving history., • Process Discipline: Ability to maintain high levels of focus during repetitive tasks and follow complex instructions without deviation., • Technical Proficiency: Comfort interacting with hardware and software. :, • Google Workspace: High proficiency in following and updating structured documentation., • Bonus: Basic familiarity with Linux command-line (navigating directories or running provided scripts)., • Physical Requirements: Ability to lift up to 50 lbs and work in a stationary position for extended periods., • Communication: Strong written skills for technical logging and the ability to relay hardware issues to the engineering team., • Availability: Flexibility to work mornings, evenings, or weekends ., • Helpful For Project, • Experience in field data collection, mapping, or fleet operations., • Background as a Field Technician, IT Support Specialist, or similar hands-on technical role., • Experience operating Electric Vehicles (EVs). About Us: Founded in 2009, IntelliPro is a global leader in talent acquisition and HR solutions. Our commitment to delivering unparalleled service to clients, fostering employee growth, and building enduring partnerships sets us apart. We continue leading global talent solutions with a dynamic presence in over 160 countries, including the USA, China, Canada, Singapore, Japan, Philippines, UK, India, Netherlands, and the EU. IntelliPro, a global leader connecting individuals with rewarding employment opportunities, is dedicated to understanding your career aspirations. As an Equal Opportunity Employer, IntelliPro values diversity and does not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, or any other legally protected group status. Moreover, our Inclusivity Commitment emphasizes embracing candidates of all abilities and ensures that our hiring and interview processes accommodate the needs of all applicants. Learn more about our commitment to diversity and inclusivity at https://intelliprogroup.com/. Compensation: The pay offered to a successful candidate will be determined by various factors, including education, work experience, location, job responsibilities, certifications, and more. Additionally, IntelliPro provides a comprehensive benefits package, all subject to eligibility. Powered by JazzHR JnL0dWy1aS

Job DescriptionDescription: Job Title: CNC Mill 3-Axis Setup Technician (Day & Night Shift Positions Available) Location: San Jose, CA Reports To: Senior CNC Mill Programmer FLSA Status: Non-Exempt Position Summary We are seeking skilled CNC Mill 3-Axis Setup Technicians to join our team on both day and night shifts. The CNC Mill Setup Technician will be responsible for setting up, operating, and troubleshooting CNC milling machines to produce precision components in accordance with engineering drawings, specifications, and quality standards. Key Responsibilities • Perform CNC 3-axis mill setups, including loading programs, selecting tools, setting offsets, and adjusting fixtures., • Read and interpret blueprints, engineering drawings, and GD&T requirements., • Conduct first article inspections and verify conformance to specifications., • Monitor machine operations, troubleshoot issues, and make necessary adjustments to maintain accuracy and efficiency., • Ensure production runs meet quality and productivity standards., • Maintain accurate setup documentation and update job travelers or work instructions as required., • Collaborate with programmers, quality inspectors, and supervisors to resolve machining or process issues., • Follow safety protocols, perform routine machine maintenance, and maintain a clean and organized work area. Work Environment • Machine shop environment with exposure to machining noise and cutting fluids., • Must be able to stand for extended periods and occasionally lift up to 50 lbs. Benefits: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Paid Time Off, • 401(k) Retirement Plan, • 401(k) Employer MatchRequirements: Required: • High school diploma or equivalent; technical or trade school preferred., • 3+ years of CNC mill setup experience (3-axis required)., • Proficient in reading blueprints and applying GD&T., • Strong understanding of tooling, fixtures, feeds, and speeds., • Ability to use precision measuring instruments (micrometers, calipers, height gauges, indicators)., • Strong troubleshooting and problem-solving skills. Preferred: • Experience with Fanuc or Haas controls., • Experience in aerospace, defense, or medical device machining., • Familiarity with Lean Manufacturing and continuous improvement practices.

Job Description Position Title: Fleet Operations Data Collection Duration: 6 Months + Pay Rate: $25 - $30 /hr on W2 Location: Sunnyvale, CA Project Deliverables We are looking for support for a data collection project. The primary objective is to maintain the integrity of the data collection process by manually operating a vehicle including by following precise routes, ensuring system uptime, and performing basic hardware troubleshooting in the field Detailed Project Description: • Data Acquisition: Manual operation of an EV for up to 8 hours per day, strictly adhering to predetermined routes and structured collection protocols., • System Health Monitoring: Comprehensive pre- and post-trip inspections of specialized onboard hardware (Cameras, LiDAR, and secondary sensors)., • Technical Triage: Basic field maintenance, including power-cycling systems, reseating data connectors, and ensuring all sensors remain clean and unobstructed., • Operational Compliance: Ensure data is logged correctly and uploaded according to project requirements., • Reporting: Reporting/ documentation of any system anomalies, hardware issues, or unique environmental observations.Project Eligibility Criteria, • Driving Record: Valid U.S. Driver’s License (3+ years) with a clean driving history., • Process Discipline: Ability to maintain high levels of focus during repetitive tasks and follow complex instructions without deviation., • Technical Proficiency: Comfort interacting with hardware and software. :, • Google Workspace: High proficiency in following and updating structured documentation., • Bonus: Basic familiarity with Linux command-line (navigating directories or running provided scripts)., • Physical Requirements: Ability to lift up to 50 lbs and work in a stationary position for extended periods., • Communication: Strong written skills for technical logging and the ability to relay hardware issues to the engineering team., • Availability: Flexibility to work mornings, evenings, or weekends ., • Helpful For Project, • Experience in field data collection, mapping, or fleet operations., • Background as a Field Technician, IT Support Specialist, or similar hands-on technical role., • Experience operating Electric Vehicles (EVs). About Us: Founded in 2009, IntelliPro is a global leader in talent acquisition and HR solutions. Our commitment to delivering unparalleled service to clients, fostering employee growth, and building enduring partnerships sets us apart. We continue leading global talent solutions with a dynamic presence in over 160 countries, including the USA, China, Canada, Singapore, Japan, Philippines, UK, India, Netherlands, and the EU. IntelliPro, a global leader connecting individuals with rewarding employment opportunities, is dedicated to understanding your career aspirations. As an Equal Opportunity Employer, IntelliPro values diversity and does not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, or any other legally protected group status. Moreover, our Inclusivity Commitment emphasizes embracing candidates of all abilities and ensures that our hiring and interview processes accommodate the needs of all applicants. Learn more about our commitment to diversity and inclusivity at https://intelliprogroup.com/. Compensation: The pay offered to a successful candidate will be determined by various factors, including education, work experience, location, job responsibilities, certifications, and more. Additionally, IntelliPro provides a comprehensive benefits package, all subject to eligibility. Powered by JazzHR XRXZZlUAF8

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Free uniforms, • Health insurance, • Paid time off, • Training & development Company Overview: SkyBlue Pool is a leading provider of swimming pool maintenance and repair services, dedicated to ensuring our customers enjoy clean, safe, and functional pools year-round. We pride ourselves on delivering exceptional service and expertise to homeowners and businesses alike. Position Overview: We are seeking a skilled Swimming Pool Equipment Repair Technician to join our team. The ideal candidate will have experience in diagnosing and repairing various types of swimming pool equipment, including pumps, filters, heaters, and automated control systems. This role requires a strong attention to detail, excellent problem-solving skills, and a commitment to delivering high quality service to our clients. Responsibilities: · Perform inspections and troubleshoot issues with swimming pool equipment. · Diagnose and repair pumps, filters, heaters, and other pool equipment as needed. · Install, maintain, and upgrade swimming pool systems and components. · Test equipment functionality and ensure proper operation. · Provide recommendations for equipment upgrades or replacements as necessary. · Communicate effectively with clients to explain repair options and cost estimates. · Maintain accurate records of service calls, repairs, and inventory. Qualifications: · Proven experience in swimming pool equipment repair and maintenance · Strong mechanical aptitude and troubleshooting skills · Familiarity with a variety of pool equipment brands and models · Ability to work independently and prioritize tasks effectively · Excellent communication and customer service skills · Valid driver’s license and clean driving record · Certification in pool equipment repair or related field is a plus

ABM Electrical Power Services is seeking an experienced Infrared (IR) Electrician to support a dedicated electrical maintenance program at a large mission-critical campus in Santa Clara, California. This position is responsible for performing infrared inspections of electrical systems, identifying thermal anomalies, documenting findings, and supporting the planning and execution of corrective electrical repairs. The technician will work independently in the field, provide detailed reporting, and ensure electrical assets are maintained in a safe and reliable operating condition. The role is ideal for a journeyman-level electrician with strong electrical troubleshooting skills and experience using infrared thermography equipment. This position is assigned to a long-term customer contract and provides ongoing career opportunities within ABM Electrical Power Services. If project needs change, the technician may be transitioned into other Electrical Power Services operations. Pay:$45.00. The pay listed is the base hourly rate + plus available paid overtime. The pay listed is the salary range for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ABM 2026 Employee Benefits | Staff & Management Essential Functions • Perform infrared (IR) thermographic inspections on electrical distribution systems and equipment., • Utilize thermal imaging cameras to identify hot spots, abnormal operating conditions, and potential equipment failures., • Inspect electrical equipment including:, • Switchboards, • Switchgear, • Panelboards, • Circuit breakers, • Motor control equipment, • Transformers, • Power cables and connections, • Electrical motors and associated systems, • Analyze infrared images and temperature data to determine equipment condition and recommend corrective actions., • Document findings and prepare daily, weekly, and monthly inspection reports., • Develop repair recommendations for equipment exhibiting thermal anomalies or signs of deterioration., • Perform minor electrical repairs and corrective maintenance activities when scheduled and authorized., • Tighten, torque, clean, and repair electrical connections and components as needed to mitigate identified deficiencies., • Support maintenance planning activities by identifying equipment requiring future repair or replacement., • Maintain inspection records, photographs, and asset documentation in accordance with customer and ABM requirements., • Communicate findings, recommendations, and project updates to supervisors and customers., • Comply with all OSHA, NFPA 70E, lockout/tagout (LOTO), and site-specific safety requirements. Required Qualifications • High school diploma or GED., • Minimum 3–5 years of experience as an electrician, electrical maintenance technician, electrical field service technician, or related electrical trade., • Working knowledge of electrical power distribution systems and equipment., • Experience performing electrical inspections, troubleshooting, maintenance, or repair activities., • Ability to identify electrical deficiencies and recommend corrective actions., • Experience using infrared thermography equipment or thermal imaging technology., • Ability to read and interpret:, • One-line diagrams, • Electrical schematics, • Wiring diagrams, • Equipment manuals, • Technical specifications, • Knowledge of:, • OSHA safety requirements, • NFPA 70E electrical safe work practices, • Arc-flash and shock protection principles, • Lockout/Tagout procedures, • Proficiency with Microsoft Outlook, Word, Excel, and electronic reporting systems., • Strong written communication skills with the ability to produce clear and accurate reports., • Valid driver's license and acceptable driving record. Preferred Qualifications • Journeyman Electrician certification, training, or equivalent field experience., • Infrared Thermography Level I Certification preferred., • Demonstrated experience independently performing infrared inspections and thermal imaging analysis., • California Electrician Certification., • NFPA 70E certification or training., • OSHA 10 or OSHA 30 certification., • Experience with FLIR or similar infrared imaging systems., • Experience working in mission-critical facilities, commercial campuses, industrial facilities, or data center environments., • CPR/First Aid certification. Knowledge, Skills, and Abilities • Ability to work independently and manage assigned inspection routes and schedules., • Strong understanding of electrical system operation and failure modes., • Ability to accurately interpret thermographic images and identify abnormal conditions., • Effective troubleshooting and problem-solving skills., • Strong organizational and time-management abilities., • Ability to communicate technical findings to customers and internal stakeholders., • High attention to detail and commitment to quality documentation., • Commitment to safety excellence and continuous improvement. Work Location & Schedule • Primary work location: Santa Clara, California., • Local candidates in the Santa Clara/San Jose market are strongly preferred., • Minimal to no overnight travel required while assigned to this customer site., • Company vehicle will be provided + Fuel card., • Standard work schedule with occasional flexibility based on customer requirements. Career Progression The IR Electrician / Thermography Technician position offers opportunities for advancement into Electrical Power Services field operations, including Senior Technician, Electrical Field Service Technician, NETA Technician, Lead Technician, Project Manager, and other technical leadership roles based on performance, certifications, and business needs. About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

Job Description Are you an experienced gardener or landscaper with a passion for bringing more greenery into urban spaces? Join our team of dedicated horticulturists and gardeners who are committed to making our cities greener and more vibrant. We’d love to have you on board! Habitat Horticulture is a locally owned company specializing in the design, installation, and maintenance of vertical gardens, interiorscapes, and green infrastructure. Driven by a commitment to promoting the psychological and environmental benefits of plants, we bring nature into urban spaces in meaningful and sustainable ways. Known for our quality work and thriving installations for a variety of high end clientele; we create environments that enhance well-being and elevate spaces across a variety of settings. We are seeking an experienced and highly motivated Interior Plant Technician to join our dynamic Bay Area Maintenance team. In this role, you will play a key part by maintaining and caring for interior plant installation and thriving vertical gardens. If you're passionate about creating beautiful, sustainable environments and have the skills to make a real impact, we’d love for you to help us make our cities greener, one space at a time. Responsibilities: • Provide care for interior plants and living walls, ensuring their health and overall appearance, • Perform aesthetic and functional pruning, including deadheading, to maintain plant vitality, • Manage pest and plant disease issues (with direction), including but not limited to; identification, treatment, and prevention, • Planting with attention to detail and proper technique, • Identify and report issues related to pests, diseases, or damage to green spaces, • Assist with the operation, troubleshooting, and maintenance of irrigation systems, • Follow fertilizer and irrigation schedules, adjusting as necessary to optimize plant health, • Communicate effectively with team members using mobile technology and other tools, • Transport plants and supplies, as needed, to support project and maintenance needs Qualifications: • Demonstrated experience and passion for interiorscape plant care, • Knowledge of tropical interior plants and ornamental exterior landscape plants, • Proficiency in identifying common plant pests and understanding their management, • Familiarity with irrigation system operation, troubleshooting, and maintenance, • Experience with nutrients and fertilizers for plants, • Ability to work independently, efficiently, and confidently make informed decisions, • Ability to interpret unknowns and make confident informed decisions, • Energetic, hardworking, self-motivated, and detail-oriented with a strong work ethic Requirements: • A valid California driver’s license with a clean driving record, • Reliable personal vehicle for transportation to various work sites (mileage, parking and tolls reimbursed), • Ability to safely lift and carry up to 50 lbs, • Comfortable working on ladders and, when necessary, from mechanical lifts, • Proficiency in operating and maintaining landscape hand tools, • Commitment to maintaining a safe and organized work environment, including proper care of tools and equipment Benefits: • Comprehensive training and certification for operation of lifts and aerial work platforms, • Health insurance coverage (Medical, Dental, Vision, and Life), • Paid Time Off to support work-life balance, • 401(k) retirement plan to help secure your future, • 11 paid holidays throughout the year

Job Description X-Ray Field Service Technician Why Nikon Metrology? You would be joining a global company and becoming part of the future, giving you the opportunity to enter a career where you can help to shape and define innovation. Job Purpose: Nikon Metrology is seeking an experienced X-ray Field Service Technician responsible for providing technical services both local and in the field, such as installation, maintenance, repair and upgrade specific to Nikon Metrology X-ray product line. Location: Remote – Minnesota, Michigan, Texas, Ohio, California Travel Requirement: Extensive (80%+) primarily throughout North America, with possibility of limited international travel to Central and South America. Key Areas of Responsibility Will Include, but not limited to the following: Field Service Perform system installations, preventive maintenance, upgrades, etc. Troubleshoot system failures/errors and perform necessary corrective actions. Perform product maintenance and software training as necessary. Provide technical product services for Nikon Metrology X-ray products in line with the department’s standard operating procedures. In-house testing and repairs of spare parts and systems. Support of equipment at customer location or via telephone/ e-mail. Responsible for the return of parts and tools from site upon completion of work. Maintain assigned service equipment and tools & provide inventory reports as needed. Submit Timesheets, expense reports, Service reports and associated documentation in a timely manner. Submit radiation dosimetry data periodically in line with company policy. Sales Support Provide support to Nikon dealers, sales personnel, and fellow Field Service Technicians. Assist sales with setup and teardown of equipment for trade shows. Support the technical sales of new products or services. Promote service contracts and other service offerings to customers. Functional Competencies: Ability to effectively perform field service job duties under pressure while always maintaining quality and professionalism. Ability to communicate well and appropriately in a customer-facing environment. Entry level MS Office Skills (Word, Outlook, Excel, PowerPoint) Ability to read and understand schematics and drawings. Ability to integrate and troubleshoot computer hardware and software. Ability to use tools of the trade such as Multimeter, Oscilloscope, soldering iron, basic hand tools, etc. Working Environment/Physical Requirements: Ability to lift up to 50 pounds Able to access tight spaces as required such as inside the cabinet. 80%+ travel, domestic and limited international How We Take Care of Our Team Culture Spirit Work as a Team, Act as a Family! We believe in bringing our team members together in a diverse and friendly company atmosphere to celebrate and socialize to inspire each other and keep our community strong and close inside and out of the office. Personal Development We want you to grow with us and be the best version of yourself, which is why we offer competitive compensation, training/advancement opportunities and tuition reimbursement. Amazing Medical Benefits & Perks We will take care of you with industry leading medical, dental, vision plans and many more benefits that allow us and you to continue to be AMAZING! As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or national origin or because he or she is an individual with a disability or disabled veteran, Armed Forces service medal veteran, recently separated veteran, or active-duty wartime or campaign badge veteran, or therein after referred collectively as “protected veterans”. Qualifications: Essential: Required Knowledge, Skills, and Abilities: Must meet all requirements to access and work with ITAR-controlled information and materials. Ability to travel 80%+ domestically with possibility of limited international travel. 2+ years’ experience in a technical role or >4 years’ experience in a technical role. Experience on complex capital equipment with related subsystems such as vacuum, manipulators, High Voltage systems, general mechanical, and PC’s. Must be able to identify and fix issues down to a board level. Electrical, electronic & mechanical skills. Must have strong verbal and written communication skills. Ability to work overtime (This position is non-exempt and eligible for overtime pay in accordance with the Fair Labor Standards Act (FLSA). Certificates, License, Registrations: 2-year technical degree & a minimum of 2 years’ experience in a technical role or >4 years’ experience in a technical role. Valid driver’s license and ability to be insured. Valid passport and ability to travel outside of the United States. Compensation details: 35-50 Hourly Wage PI372c6cbaa165-25405-41316474

Job DescriptionAnimal Eye Specialists (AES) is in need of an individual to work as a Registered Veterinary Technician (RVT). We are looking for a friendly, responsible, and efficient individual with the ability to multi-task in a fast paced specialty hospital. A RVT provides assistance to AES veterinarians with a variety of procedures, with an emphasis in the following areas: physical exams related to ophthalmic conditions; sedation to perform procedures to treat ophthalmic conditions including ocular ultrasounds, anesthesia induction, ET Tub placement and IV catheter placement; anesthetic monitoring of patients during ophthalmic surgeries, procedures, and treatments including monitoring patients during recovery from surgery, procedures, and treatments. Responsibilities: • Restraint of patients for physical exams related to ophthalmic conditions., • Patient preparation for sedation and anesthesia to perform procedures and surgeries to treat ophthalmic conditions., • Surgical preparation including endotracheal tub placement, anesthesia induction, and IV catheter placement., • Patient monitoring while under anesthesia in the operating room during ophthalmic surgeries., • Patient monitoring during recovery from surgery and other sedated procedures., • Cleaning and maintenance of surgical instruments, diagnostic equipment, and surgical medical equipment., • Cleaning and maintenance of operating, procedure, and exam rooms., • History taking and record keeping, • Client communication as directed by attending veterinarian, • Light cleaning of the AES physical clinic areas as needed.Requirements:, • Hold a current Registered Veterinary Technician license valid and in good standing in the state of California., • Experience in a veterinary clinic (specialty or non specialty) is preferred, but not required.Animal Eye Specialists has a competitive benefits package including:, • Paid Vacation., • Paid Sick Days., • Paid Holidays., • Health, Dental, and Vision Insurance., • 401(k) Plan with Employer Match., • Pet Care Benefits., • Uniform Allowance.Compensation:Starting at $33.00/ hour. Final wage will take into account and be commensurate with experience. Hours and Availability:, • We are anticipating this position to be 32-40 hours/ week on a consistent basis., • We are open Monday through Friday with normal business hours of 8AM to 6PM. Please email a resume and cover letter to apply.

Job Description Job Title: Lash Stylist / Lash Technician / Lash Artist Location: Santa Clara, CA (in-person) Job Type: Full-time Pay: $20.00 – $38.00 per hour (plus tips, commission, and bonuses) Expected Hours: Up to 40 hours per week Join Our Team at LashBar™ Santa Clara! We’re hiring experienced Lash Stylists / Lash Technicians for our brand-new location in Santa Clara Square Plaza — conveniently located near Whole Foods, Starbucks, Sephora, CorePower Yoga, and more! At LashBar™, we’re more than just lashes. We’re a growing franchise that believes in empowering our team with ongoing training, a supportive work environment, and real career growth opportunities. What We Offer: • Hourly pay + 100% of your tips, • Stylists average $1,500–$2,000/month in tips, • 10% commission on product & membership sales, • Flexible scheduling (within store hours: 10am–8pm), • Top-tier training including patented lash plate system & LED lash technology, • Support for health insurance through Covered California, • A clean, modern, ergonomic work environment, • Growth potential within a rapidly expanding franchise Requirements: • Valid California Esthetician or Cosmetology License (Required), • 1+ year experience as a Lash Stylist (Required), • Skilled in Classic, Hybrid, Volume, and Mega Volume lash techniques, • Experience in lash lifts, brow laminations, tints, and waxing, • Passionate about beauty and lash artistry, • Strong customer service skills, • Certified in lash extensions (preferred), • Reliable, punctual, and team-oriented What You’ll Do: • Provide expert lash and brow services, • Create custom lash looks using proper techniques, • Educate clients on aftercare and maintenance, • Promote memberships, packages, and retail products, • Maintain a clean and professional work environment, • Support day-to-day studio operations Why LashBar™ Santa Clara? We’re committed to your success. Whether you're looking to grow your lash career or join a supportive team that values your talent, LashBar™ Santa Clara is where you belong. Apply today and let your lash career thrive with us!

Job DescriptionHiring ASAP!! Robot Operator (No Experience Required) Location: San Jose, CA Help Build the Future of Humanoid Robotics We're seeking a detail-oriented Robot Operator to work hands-on with cutting-edge humanoid robots in a fast-paced AI and robotics environment. In this role, you'll execute test scenarios, document results, identify issues, and support engineers in improving next-generation robotic technology. This is a unique opportunity to gain experience in one of the most exciting and rapidly growing industries while contributing directly to the development of advanced humanoid robots. What You'll Do • Operate humanoid robots through predefined test procedures., • Execute tests using simple controls, software interfaces, and test equipment., • Accurately document test results, observations, and system performance., • Identify and report issues, anomalies, and unexpected robot behavior., • Communicate findings to engineering teams., • Follow safety procedures and maintain an organized lab environment., • Support basic troubleshooting and test validation activities., • Manage test data and reports using computer-based tools.What We're Looking For, • Experience in a production, testing, lab, manufacturing, or similar environment., • Strong attention to detail and ability to follow processes consistently., • Comfortable performing repetitive tasks while maintaining accuracy., • Basic computer skills, including data entry and documentation., • Familiarity with Microsoft Office or similar software., • Strong written and verbal communication skills., • Ability to work effectively in a collaborative team environment.Preferred, • Experience as a Test Technician, Production Operator, Lab Technician, Quality Inspector, or related role., • Basic knowledge of electronics, hardware testing, or computer systems., • Interest in robotics, automation, or emerging technologies.Why Join Us?, • Work directly with advanced humanoid robots., • Contribute to groundbreaking AI and robotics innovation., • Collaborate with a highly motivated engineering team., • Gain valuable experience in a rapidly growing industry., • Opportunity for growth as the company expands.Work Environment This role is based in a production and laboratory setting and involves hands-on testing, observation, documentation, and repetitive test execution. Success in this position requires focus, consistency, and a passion for technology. Ready to help shape the future of robotics? Apply today. Applicants will be contacted within 24 Hours. Job Type & Location This is a Contract to Hire position based out of San Jose, CA. Pay and Benefits The pay range for this position is $26.00 - $29.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Jose,CA. Application Deadline This position is anticipated to close on Aug 27, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. \nCompany Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Title: Information Technology Professional (IT/CTN/IS) Category / Component: Enlisted • Both Overview Information Systems Technicians, Cryptologic Technician Networks, and Intelligence Specialists keep the Fleet connected, informed, and secure by operating and defending networks, conducting cyber operations, and producing intelligence for decision makers across the Navy. Key Responsibilities As an Information Systems Technician, design, operate, secure, and restore networks, servers, and communication systems that support naval operations; as a Cryptologic Technician Networks specialist, conduct offensive and defensive cyber operations, investigate and track adversary activity, and help protect Navy networks and critical systems; as an Intelligence Specialist, collect and analyze information on adversaries, environments, and weather and create intelligence products and briefings for commanders. What to Expect High tempo, mission critical work supporting around the clock operations and watch floors; mix of help desk and user support, network and systems administration, incident response, and planned maintenance; continuous learning in cyber tools, network defense, signals analysis, and intelligence production; strict requirements for handling classified information and complying with security and information assurance standards; shift work, duty rotations, and deployments afloat and ashore. Work Environment Worldwide assignments ashore at information warfare and intelligence commands and afloat on ships, aircraft, or submarines; work in secure facilities, server rooms, operations centers, and shipboard communications spaces; close teamwork within information warfare and intelligence teams and with supported operational units. Pathways, Training & Advancement Recruit Training followed by Class A School in an information warfare specialty, such as IT or CTN at information warfare training sites and IS at intelligence training commands; advanced C schools and follow on training in areas such as cyber operations, network defense, digital forensics, signals analysis, targeting, imagery, language, and mission systems; progressive advancement based on qualifications, performance, and warfare pins such as Information Warfare and platform specific warfare designations. Direct enlistment into IT, CTN, or IS pipelines from civilian life based on aptitude, security clearance eligibility, and Navy needs; in service conversion opportunities for qualified Sailors who meet screening criteria and community requirements; Reserve accession pathways for prior service or qualified civilian professionals when manning needs allow. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: United States citizenship or equivalent status as allowed by law and policy, with most billets requiring citizenship; high school diploma or equivalent; at least 17 years of age; strong interest and aptitude in computers, networks, cyber operations, and analytical work; eligibility for a security clearance at the Secret or Top Secret level depending on the billet. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job DescriptionDealership Inventory Specialist – $1,500 Sign-On Bonus Full-Time | Monday–Friday | 8:00 AM–4:30 PM or until route is completed Route: Palo Alto, Sunnyvale, San Jose & Surrounding Areas Pay: $26.00++ per hour + $1,500 Sign-On Bonus Hourly pay is a combination of base pay and per-vehicle photo payout. Potential flexibility based on experience and qualifications. Get Out of the Office and Into the Automotive Industry Pro-MotionPix is hiring a Dealership Inventory Specialist to work with automotive dealerships throughout the Palo Alto, Sunnyvale, and San Jose areas. This is a full-time field position that keeps you moving throughout the day. Rather than working at one location, you'll travel to assigned dealerships, work with dealership employees, handle vehicles, and complete inventory-related assignments. A typical day involves finding vehicles and keys, moving vehicles into designated areas, checking inventory availability, and using a company-issued iPhone to capture vehicle photos, 360°ree; spins, and videos. Photography experience is not required. We provide paid training and show you exactly how to use our equipment and follow our process. The position is structured and hands-on, with an emphasis on staying organized, completing your route, communicating with dealership staff, and maintaining consistent quality. Your Responsibilities • Travel to assigned dealerships using your own reliable vehicle, • Check dealership lots for vehicles scheduled for service, • Locate vehicle keys and confirm vehicle availability, • Move vehicles to designated staging areas when necessary, • Capture vehicle photos, videos, and 360°ree; spins using a company-issued iPhone and app, • Communicate with dealership personnel about missing vehicles, keys, or inventory questions, • Follow up with dealership staff to resolve issues and keep assignments moving, • Complete daily assignments according to established procedures, • Maintain quality and accuracy while working efficiently, • Work outdoors and walk dealership lots throughout the day, • Represent Pro-MotionPix professionally at each location Is This Job a Good Fit for You? We're especially interested in candidates with experience in hands-on, active, or route-based jobs. Your previous experience may include: • Automotive: Porter, detailer, lot attendant, lube technician, inventory clerk, • Warehouse: Warehouse associate, material handler, inventory worker, shipping/receiving, • Construction: General labor, installer, trades, jobsite worker, • Landscaping: Crew member, grounds maintenance, outdoor labor, • Delivery: Delivery driver, route driver, logistics, merchandising, • Other field work: Maintenance, facilities, moving, or similar positions We Look for People Who: • Show up reliably and take their responsibilities seriously, • Are comfortable working independently, • Stay productive without needing constant supervision, • Don't mind being outdoors throughout the workday, • Are comfortable walking and performing physical tasks, • Communicate clearly and professionally, • Can think through problems when things don't go according to plan, • Follow instructions and established procedures, • Are comfortable learning new technology, • Take pride in completing work accurately and efficiently RequirementsWhat You Need • Valid driver's license, • Reliable vehicle, • Minimum 1 year of consistent work history preferred, • Automotive, warehouse, construction, landscaping, delivery, or similar experience preferred, • Ability to work outdoors in varying weather conditions, • Ability to walk dealership lots and perform physical tasks throughout the day, • Strong communication and problem-solving skills, • Comfortable using smartphones and mobile applications, • Manual transmission experience is a plus, but not required, • Must successfully pass a pre-employment drug screen and background check BenefitsPay, Training & Benefits • $26.00++ per hour, • Base pay + per-vehicle photo payout, • $1,500 Sign-On Bonus, • Paid training, • Company-issued iPhone and equipment, • Mileage reimbursement between dealership stops, • Company uniform shirt provided, • Monday–Friday schedule, • No weekends, • Independent work environment, • 401(k), Health, Dental & Vision benefits for eligible full-time employees See What the Job Is Like We want you to understand the position before you apply. Visit our Careers page and watch the Day in the Life and Pay Plan videos. They provide an overview of the daily workflow and explain how our compensation structure works. Ready to Apply? If you're looking for a full-time weekday position that keeps you active, puts you around vehicles, and gives you the independence to manage your daily route, we'd like to hear from you. Apply today and join the Pro-MotionPix team!

Warehouse Floor Technician Kellermeyer Bergensons Services (KBS) has immediate full-time, permanent openings to join our Warehouse Floor Technician crew. If you enjoy working in a fast-paced environment and helping make an impact on safety in the workplace, then this is the job for you! What are you waiting for, APPLY TODAY and join the KBS Crew! Kellermeyer Bergensons Services (KBS) is the largest privately held provider of facility services in North America, servicing over 2 billion square feet of space daily . We help industry leaders across a wide range of key verticals-including retail, industrial and logistics, healthcare, education, manufacturing, and more -maintain clean, efficient, and welcoming spaces that support their operations. As we continue to grow, we're looking for team members who are dedicated, reliable, and ready to contribute to a culture built on respect, opportunity, and pride in service. Work Schedule: Days/nights vary, including weekends Shifts Available: N/A 9pm-5:30amFull time must work weekends Starting Pay: $19.5 Our Warehouse Floor Technician positions perform the following duties within designated work areas, as assigned at the beginning of each shift: Perform spot removal, extraction, bonnet cleaning, strip/wax, scrub/recoat, seal/grout, etc. Scrub, shine, clean, and repair carpeted and non-carpeted areas using appropriate equipment and chemicals. Clean floors and stairways by sweeping, mopping, and vacuuming. Move large furniture and objects when necessary, and follow safety guidelines to prevent injury to themselves and others. Keep janitor closet neat, clean, and organized Follow the manufacturer's specifications for preparing chemicals and using the equipment. Ensure building doors and windows are secure and locked. Report to Supervisor needed repairs, safety hazards, or conditions requiring additional service. Follow all company policies and procedures. Perform other duties as assigned. Ability to operate and use janitorial tools, equipment, and supplies preferred, but not required. One year of prior floor care experience preferred. Requirements for our Warehouse Floor Technician Positions: Lift and move totes up to 49 pounds each Ability to lift and carry objects weighing from 15 to 25 pounds. Regular bending, lifting, stretching, and reaching both below the waist and above the head Engage in full manual dexterity in both hands and wrists Ability to climb ladders and gangways safely and without limitation Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and safe handling for chemicals sheets/documents (generally in English; may have in Spanish where state required) Dexterity in eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation) KBS utilizes the KBSPresence mobile timekeeping software for accurate recording of employee work hours, attendance management, completion of required training, and distribution of important employment-related information. All non-exempt employees are required to download and use the KBSPresence app on their personal mobile devices to clock in and out for their shifts and breaks. In accordance with applicable local laws, cell phone reimbursement is provided to support the use of personal devices for work-related tasks. What's In It for You? As a full-time KBS employee (30+ hours per week) you qualify for benefits including medical, prescription drugs, dental, vision and more! Affordable Limited Medical Insurance (Coterie) which includes virtual access to US board-certified physicians who can consult, diagnose, and prescribe medications via interactive audio or video. Life Insurance Supplemental Health Insurance (E.G., Accident) 401k plan with a match Paid and Unpaid Time Off Quick Pay - voluntary benefit offered to both full-time and part-time KBS employees who are paid hourly via direct deposit. Quick Pay provides a way for employees to access a portion of their pay prior to the upcoming scheduled pay day. Pet Insurance PerkSpot Discount Program - discounts on travel, gyms, cell phones, restaurants, auto, apparel & electronics Progressive Pay is available at select site locations, though it is not offered at every location. Employees will receive a $.50 increase after the first 90 days, and another $.30 increase after completing 180 days. Check today if this is available to you. KBS considers all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity, and expression, marital or military status, or based on an individual's status in any group or class protected by applicable federal, state, or local law. KBS also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law. We participate in the E-Verify program administered by the U.S. Department of Homeland Security

Monday - Friday, First Shift 8:00 am-5:00 pm.Maintenance Technician experience.We are excited to share a new opportunity! We are currently in need of an experienced Maintenance Technician for a bona fide top employer in this market! .This position will not be available for long so give us a call at

Job Description Hazardous Waste Technician Full Time + Benefits (Medical, Dental, Vision, 401k with Company Match, PTO) Job Type: Onsite Shift: Day Schedule: 5:am-1:30pm, Tuesday – Saturday Hourly Range: $27.00 - $33.00, DOE Location: Milpitas, CA Fralock is an engineered solutions provider of specialty components and subassemblies using advanced materials for high reliability, severe environment, and technically challenging applications. We develop and manufacture custom integrated solutions. Established in 1967, we are a critical solutions provider to Fortune 500 corporations, government, and targeted OEMs in a variety of industries including Semiconductor Equipment Manufacturing, Medical and Life Science, Aerospace and Defense, Industrial, Electronics, and Energy. Fralock is headquartered in Valencia, CA with manufacturing locations located throughout Northern and Southern California. VISION To be recognized by our customers as a leading solutions provider of proprietary engineered advanced materials for high reliability, severe environment, and technically challenging applications. MISSION To create value, profitably grow, and share our success with all stakeholders. CULTURE • Respect – We treat others the way they want to be treated., • Integrity – We practice a high standard of ethics in our business dealings with customers, suppliers and employees., • Responsiveness – We have a sense of urgency in responding to internal and external requests, and work proactively to solve problems., • Excellence/Competence – We empower our people to continuously improve and execute high quality work., • Teamwork – We work together to achieve Fralock business objectives by communicating at a high level, by listening and having clarity in our expectations of one another., • Individual Accountability and Personal Responsibility – We do what we have committed to do when we committed to doing it., • Continuous Improvement across all segments of the company This position requires access to information controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR), the successful candidate must be a "U.S. person" as defined in the ITAR and EAR (which generally means (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) have been admitted to the United States as a refugee, or have been granted asylum, as specified under applicable law. Job Summary The Hazardous Waste Technician will be responsible for implementing and maintaining regulatory requirements relating to the Resource Conservation and Recovery Act (RCRA), Environmental Protection Agency (EPA), Certified Unified Program Agency (CUPA) and Department of Transportation (DOT). This position will be working with engineers and technicians daily to ensure our Engineering and Manufacturing Operations can support the company's goals while meeting all environmental objectives and regulatory requirements. Key Responsibilities • Responsible for environmental compliance with all applicable federal and state regulations and associated agencies, • Perform tasks related to regulatory hazardous waste handling, waste treatment and discharge storage and disposal requirements per local, state, and federal governing bodies, • Monitor and manage levels of hazardous waste at each department's satellite accumulation area, • Identifying all hazardous material and hazardous waste and ensuring that all stated are properly stored, used and disposed of based on material classification, • Determine waste process and implementation of new waste streams, • Ensure all hazardous material and hazardous waste is properly labeled, • Accurately record and maintain hazardous waste inventory logs and conduct frequent auditing per company's guidelines, • Conduct audits related to the conditions and handling of storage locations, • Prepare and schedule the process in which hazardous waste is disposed of by company guidelines and government regulations, • Implement and control the Spill Prevention Countermeasures and Control Plan (SPCC), • Order, receive, and maintain all materials needed to support containment and disposal method supplies, • Perform environmental compliance and due diligence audits, • Manage hazardous materials and ensure all hazardous materials are labeled and stored properly in the storage areas Required Skills • Implementation and maintaining a hazardous materials and hazardous waste program that conforms with local, state, and federal regulations, • Managing hazardous waste storage and accumulation areas, • Deploying and leading emergency response crews in incidents involving hazardous and non-hazardous material releases to air, soil and water, • Knowledge in providing situational PPE requirements based on risk assessment level with the application of hazardous material and hazardous waste in work environment, • Ability to administer general/emergency first aid and CPR Preferred Skills • Demonstrated strong propensity for hands-on work and attention to detail in either academic or career pursuits, • Ability to multi-task, to manage shifting priorities and to follow through on projects with minimal supervision, • Ability to work in a construction/industrial environment, • Ability to communicate well with technicians and engineers, • Strong organizational and communication skills Experience Requirements • Minimum 2-3 yrs. experience in manufacturing environment, • Operators are required to have Hazardous Communication training covering cyanide safety after accepting job offer. The training must be completed before work assignments are given. Education Requirements • High School Diploma, G.E.D., five (5) years’ work experience with accredited certification program, or two (2) years related technical training program/military technical training with two (2) years’ work experience. Physical Requirements • Manual Dexterity - The ability to grasp, manipulate, or assemble objects and perform maintenance tasks., • Correctable Vision and Hearing., • Ability to stand/walk and perform physical labor for most of the working shift. Pull, push, squat. etc. to accomplish repairs., • Intermittently lift loads of up to 50 pounds All offers of employment at Fralock are contingent upon clear results of a background check. Background checks may include some or all of the following depending on job title and responsibilities: • Social Security Verification, • Prior Employment Verification, • Criminal History, • Personal and Professional References, • Motor Vehicle Records, • Credit History Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of a position. Fralock provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Maintenance Technician II Position Type: Full time Weekly Scheduled Hours: 40 State: California City: San Jose Zip Code: 95125 Total Base Pay Range: $57,000.00 - $80,500.00 Overview: AvalonBay Communities, Inc., an equity REIT, has a long-term track record of developing, redeveloping, acquiring and managing distinctive apartment homes in some of the best U.S. markets, and delivering outsized, risk-adjusted returns to shareholders. With equal parts experience and vision, we've established a leadership position rooted in our purpose of creating a better way to live and that is always focused on building value for the long term. Creating a better way to live is the purpose that binds AvalonBay associates. We take that purpose seriously and expect you will as well. By focusing on collaboration, innovation, and taking ownership of our choices and actions, we act in ways that focus on creating value for our customers, investors and associates. Your positive, professional, and consistent personal interactions make AvalonBay a great place to work. The Role: Ready to take your maintenance skills to the next level? At AvalonBay Communities, we're not just maintaining apartment homes; we're creating exceptional living experiences. If you're a talented Maintenance Technician looking to advance your career, you're in the right place. Our team is searching for a Maintenance Technician who is ready to tackle challenges, bring innovative solutions to the table, and ensure our residents enjoy a superior quality of living. If you're passionate about fixing, enhancing, and perfecting, we want you to be a part of our dynamic community. Join us at AvalonBay and be a part of redefining what it means to live in style and comfort! The Maintenance Technician is responsible for executing maintenance requests by diagnosing problems and making repairs in order to maintain the physical condition of the community and to ensure that service requests and repairs are made in a timely manner. As a maintenance technician, you will be the talented individual who: Diagnoses and repairs problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.), and waste management systems. Completes assigned service requests and repairs consistent with company operating and equipment/supply standards and in a timely manner. Ensures vacant apartment homes are rent-ready in a timely manner. Perform turnkey work as required. Conducts apartment Preventative Maintenance Assist in painting both interior and exterior surfaces Maintains Incident and Injury Free safety culture by following all AvalonBay safety policies and procedures and reporting any unsafe behavior or conditions including nonfunctioning equipment. Performs Hot Works including brazing, soldering, and welding within AvalonBay's Standards. You Have: 2-3 years of experience in maintenance work, including knowledge surrounding HVAC repair, Plumbing, Electrical, and General Maintenance repair work. A valid driver's license. Ability to accommodate an on-call schedule in rotation with the team each month. Ability to communicate with our associates and residents in order to provide customer service. Ability to read and understand policies and procedures including but not limited to Key Control Policy, Apartment Home Turnover Policy and all Maintenance Emergency policies and procedures. Ability to identify cleaning and chemical supplies, ability to read and understand Hazard Communication Safety Data Sheets (SDS), ability to understand proper applications of chemicals and general cleaning supplies and ability to frequently handle these products. Knowledge of Personal Protective Equipment (PPE) and ability to use properly. Basic understanding of emergency systems, shutoffs, locations and sequence of operations. Demonstrates knowledge of paint types and paint tools How AvalonBay Supports You: We know that our teams are the beating heart of our success and we're committed to showing our appreciation. We offer: Comprehensive benefits — health, dental and vision, 401(k) with company match, paid vacation and holidays, tuition reimbursement, an employee stock purchase plan and more. Click on Benefits (https://jobs.avalonbay.com/benefits) (https://jobs.avalonbay.com/benefits) for information. Growth based on achievement and promotion from within. Associate recognition (a company-wide recognition program that celebrates associate efforts and successes in contributing to the overall success of the organization - including destination awards, 'AvalonBay's Very Best' recognition program and others!). A 20% discount on our incredible apartment homes. * A culture built on purpose and our core values - A Commitment to Integrity, A Spirit of Caring, and A Focus on Continuous Improvement. Additional Info: AvalonBay is proud to be an equal opportunity employer and is committed to an inclusive and diverse work environment free of discrimination and harassment. We believe that in order to achieve our purpose of creating a better way to live, we must recruit, develop and retain associates with a wide range of backgrounds, experiences and perspectives and create an environment that encourages all voices to be heard, understood and appreciated. With this we know we can do great things. AvalonBay makes employment decisions without regard to a person's race, ethnicity, color, religion, sex, national origin, sexual orientation, gender identity, pregnancy (including childbirth, lactation or related medical conditions), age, physical or mental disability, genetic information (including characteristics or testing), citizenship status, military or veteran status, or any other status protected by the law. AvalonBay will consider for employment qualified applicants with criminal histories in a manner consistent with requirements under the law. Applications are being accepted on an ongoing basis. AvalonBay does not require or request that you provide any information that identifies your age, date of birth, or dates of school attendance or graduation. Please redact this information prior to the submission of your application and/or leave these fields incomplete on your application. For California residents, if you elect to apply to AvalonBay you accept the AvalonBay California Personnel Privacy Notice ( https://www.avaloncommunities.com/california-personnel-privacy-notice/ (https://www.avaloncommunities.com/california-personnel-privacy-notice/) ) No Fees Notice & Recruitment Fraud Disclaimer: AvalonBay Communities, Inc. ("AvalonBay") is aware that there is recruitment fraud activity whereby scammers impersonate AvalonBay and offer fake employment opportunities to candidates. These scammers often seek to obtain personal information or money from candidates. Please note that AvalonBay will never charge any candidate a registration fee, hiring fee, or any other fee in connection with its recruitment and hiring process. If you suspect that you are being contacted by a scammer impersonating our company, please report it immediately to our official HR Department ( avalonbayhumanresources@avalonbay.com (mailto:avalonbayhumanresources@avalonbay.com) ).

Description: Interested in making a difference in young adults’ lives between the ages of 16-24? If so we may have the perfect job for you. (San Jose) Job Corps is a government-funded, no-cost education and vocational training program administered by the U.S. Department of Labor that helps socioeconomically disadvantaged youth. We strive to fulfill this mission by following our Core Values of Safety, Individual Accountability, Respect, Integrity, Growth and Commitment. Come and surround yourself with talented and professional individuals who have also taken the next step of making a difference in someone’s life. You would not only have a great and dedicated team to work with, but you may also be eligible to take advantage of a comprehensive benefits plan which includes medical, dental, vision, 401(k), and PTO. Schedule: Monday to Friday 8:00am-5:00pm, full-time, onsite Job Summary: Performs duties in various highly skilled trade areas. Duties/Responsibilities: • Prepares reports and forms and documents. Enter data in the Computer Maintenance Management System (CMMS)., • Maintains confidentiality but reports significant events or situations immediately through approved channels to ensure the health, safety, and well-being of students and staff, and to ensure that required reporting occurs, and that students receive emergency services as needed., • Follows all required Safety Protocols, including the proper use of PPE., • Facilitates prompt and appropriate assistance to students in the event of injury, illness, or emotional trauma., • Performs interior and exterior center janitorial, building maintenance and ground keeping assignments according to work orders., • Performs necessary skilled work in one or more areas of plumbing, heating, carpentry and other skill trade areas as needed., • Performs carpentry work in repairing or replacing doors, windows, walls, flooring, roofing, painting and any other work pertaining to wood structures., • Performs plumbing, heating, and air-conditioning work in repairing or replacing furnaces, duct work, air conditioners, piping instrument controls, wash basins, toilet facilities and any other work pertaining to heating, air-conditioning, and plumbing facilities., • Performs electrical work in repairing and replacing fluorescent fixtures, control switches, disconnecting wiring and any other work pertaining to electrical facilities., • Performs minor construction such as building storage bins, stockroom shelves, counters, work benches, etc., • Uses precision hand tools and power tools., • May transport students by bus and automobile., • May drive trucks and other vehicles including PIV (Powered Industrial Vehicles), • Directs the work activities of general maintenance personnel., • Attends required staff training sessions., • Performs other duties as assigned. #SD #maintenancejob #maintenance #school #schooljobs Requirements: Qualifications: Minimum: High school graduate or equivalent. Three years’ experience in the respective fields of electrical, heating, refrigeration, mechanical and carpentry work. Preferred: Certificate of completion from building trades training program or apprenticeship program. Extensive experience in the building trades. Knowledge: Must possess a valid State driver’s license. Ability to obtain a commercial driver’s license if required. Ability to operate power and hand tools. Sound working knowledge of electrical, HVAC, building maintenance & construction fields. Ability to read and interpret schematics. Ability to handle multiple tasks. Physical Requirements: Frequently Sitting Seeing Hearing Speaking Driving Occasionally Standing Walking Bending Stooping Squatting Flexibility Seldom Climbing Lifting 50 pounds Carrying Kneeling Pushing/Pulling Running Environmental Demands: Equipment: Ability to operate office equipment Work Alone: Occasionally works alone Work With Others: 85% of time spent working and interacting with team and other departments Reading: Ability to read at a high school level Writing: Ability to write at a high school level Compensation details: 30.43-30.43 Hourly Wage PI3c342a9b1761-37820-41320796

Field Service Technician I US-CA-San Jose Job ID: 34755 Type: Full-Time of Openings: 1 Category: Field Service CUSA San Jose Branch About the Role If finding an effective fix and supporting customers with the highest level of service standards sounds appealing to you, Canon USA, a leader in technology, solutions, and services, wants to know your story. We’re actively seeking a Field Service Technician to deliver amazing experiences and elevated efficiency within the routine maintenance of Canon-supported products in accordance with Service and Parts Standards. Your Impact In this position, you’ll be accountable for: • Reporting to your manager product failure trends and serviceability issues with necessary supported documentation, ensuring accurate information and record keeping., • Meeting customer demands by providing efficient, responsive, and accurate Field/Shop/on-site maintenance., • Properly maintaining all technical information, Field Service Reports, Expense Reports, and Canon property assigned., • Showcasing strong customer communication and satisfaction skills., • Maintaining the performance of assigned machines., • Facilitating performance at a level which helps to achieve the branch/district’s overall metric targets. About You: The Skills & Expertise You Bring Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19. Do you meet these requirements? • Hold a High School diploma or equivalent experience required., • Possess a basic understanding of internet environments and the ability to successfully complete the 120-day introductory period and the PDIF (Printing and Digital Imaging Foundations) new-hire class., • Ability to travel (valid driver's license and acceptable driving record necessary)., • Required to take all necessary steps to obtain security and/or other clearances required by customers to enter the customers' premises., • Must be able to lift 50 pounds and be active more than 50 percent of the time (walking, standing, stooping/kneeling). In accordance with applicable law, we are providing the anticipated rate for this role: $19.00 - 26.31 hourly. This role is eligible for a transportation allowance. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at _ We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Posting Tags #PM19 #LI-FL1 Compensation details: 19-26.31 Hourly Wage PI0d045a761e46-37820-41363865

Job Title: Maintenance Technician Location: Milpitas, CA 95035 Salary Range: $24.00 - $26.00 Hourly Position Type: Full Time We're hiring a full-time Maintenance Technician for a 101-unit residential property. This role reports to the Property Manager and Assistant Property Manager and works closely with the on-site porter. The position is approximately 80% maintenance and 20% porter/grounds duties, covering general maintenance requests such as electrical and plumbing repairs, unclogging sinks and toilets, light carpentry, and appliance troubleshooting. Additional responsibilities include apartment turns, unit inspections, preventative maintenance, general handyman work, groundskeeping, and coordinating with vendors as needed. What We Offer • Pay: $24.00 - 26.00 per hour, • Schedule: Full-time (40 hours per week), Monday–Friday, 8:00 AM–5:00 PM., • On-call for after-hours emergencies, • Benefits: Medical, Dental, Vision, Life Insurance; 401(k) with employer match, • Time Off: Paid vacation and 15 paid company holidays, • Inspects property and equipment daily to determine need and extent of service, equipment required, type and number of operation and maintenance personnel needed., • Respond to service requests on a first in, first out, (except in the case of an emergency) and in accordance with Fair Housing guidelines. Document to accurately describe work done, parts used, disposition and time spent., • Implementation and supervision of Preventative Maintenance program., • Review and update quarterly, semi-annual and annual preventative maintenance schedule to include changing HVAC filters, fire detector batteries, other types of safety devices, cleaning gutters, and inspecting for leaks., • Completes and submits a monthly property safety inspection report to the Resident Manager., • Assist with turnover of apartments as requested by Resident Manager to include duties such as maintenance, repair, or renovation and obtains bids for additional work from outside contractors., • Directs contracted projects to verify adherence to specifications., • Purchases and maintain records of building and maintenance supplies, machinery, equipment, and furniture., • Utilize safety equipment as applicable (i.e. back support devices, eye protection, gloves, masks, etc.), • Compiles records of labor and material cost for operating building and issues cost reports to owner or managing agents., • Assembles and analyzes contract bids and submits bids and recommendations to superiors for action., • Respond to emergency calls, 24 hours a day, 7 days a week. Overtime may be required., • Provide emergency on-call services on a rotating basis with other maintenance staff. Overtime may be required., • If you are unavailable for emergency calls at any time due to vacation or any other personal reason, it is required that you plan with the Service Technician at a sister property to be on call for you, and to notify your Supervisor and the Manager of the sister property of the arrangement., • Support office staff in efforts of safety and security of the property., • Keep Maintenance Shop neat and organized. Maintain company tools, equipment and other items in a satisfactory condition., • Meet and be personable and professional with community residents., • Effectively assess a situation which may require assistance or specialized equipment and respond appropriately in serious or emergency situations., • Communicate effectively with Property Manager daily to ensure all objectives are met and property is up to company standards., • Communicate with Property Manager regarding suppliers or vendors to ensure safe and efficient operation of property maintenance., • Trouble-shoot and diagnose and correct heating and air conditioning, and appliances problems., • Must be able to diagnose and repair equipment or appliances, which are not clearly seen or reached under counters, on ceiling etc., • Re-key locks and cut keys., • Repair electrical and plumbing problems., • Provide carpentry and sheet rock repairs., • Fix problem with cleanliness of property including trash and hallways., • Assist in monitoring maintenance, inventory, parts, cleaning supplies and placing replacement orders., • Can use power machinery properly and safely., • Driving to local areas when necessary., • Keep cellular telephone on at all times during working hours and while on call, • High School Diploma (or equivalent)., • Requires a minimum of 1-2 years relevant experience or apartment maintenance experience, • On call and weekend service experience., • Effective written and verbal communication skills., • Strong customer service, communication and interpersonal skills required., • Proven working experience in electrical, plumbing, appliance repairs etc., • Proven working experience as a janitor / porter., • Ability to handle heavy equipment and machinery., • Knowledge of cleaning chemicals and supplies., • Familiarity with Safety Data Sheets., • Candidate must have own transportation (Federal mileage rates and guidelines apply)., • Must possess a valid driver’s license and maintain current auto insurance. (Motor vehicle report review is part of the hiring process.)., • Candidate will be required to pass a background and drug screening. (A conviction will not necessarily disqualify you from employment with WSH Management. WSH Management has managed senior and multifamily properties since we began operations over 25 years ago and are very experienced in the management of both affordable and market rate apartment communities. We currently manage over 60 properties in California and have over 175 employees. Come join us! WSH Management provides equal employment opportunity without regard to race, color, religion, sex, pregnancy, national origin, ancestry, citizenship, age, marital status, disability, veteran status, sexual orientation, gender identity, genetic information, or any other basis protected by law. If needed, reasonable accommodations for the hiring process will be made. WSH Management is a drug free workplace. WSH Management is an Equal Opportunity Employer (EOE) M/F/D/V/SO. Compensation details: 24-26 Hourly Wage PId340ce8b904c-37820-41171870

Job DescriptionJob Title: Sr Quality Control Technician Location: This position is based in our Campbell, California offices. This position is on site and full time. Why Imperative Care? Do you want to make a real impact on patients? Imperative Care is changing the way stroke is treated. As part of our team, you’d be developing breakthroughs that will revolutionize the future of stroke care. Every day, the technologies that we develop at Imperative Care directly impact human lives. Our focus is on the needs of the patient, and they come first in everything we do. What You’ll Do • Prepare inspection plans and coordinate with Manufacturing Inspectors the completion of product inspections to meet production demand., • Conduct inspection and testing following controlled procedures and test methodology, performing final product acceptance testing., • Record and analyze inspection and testing data to determine if acceptance criteria has been met., • Review completed production lot history records to ensure completeness and good documentation requirement have been met., • Perform production line audits to ensure process steps are being followed by the production staff., • Initiate nonconformance process when inspection criteria failed to meet specifications, describing in detail observed defects., • Assist in the disposition activities for nonconforming material., • Participate in investigations and root cause analyses for identified issues and recommend improvements., • Coordinate calibration and preventative maintenance for equipment in quality control laboratory., • Assist in the qualification and installation of inspection/testing equipment., • Proactively support continuous improvement and lean manufacturing processes., • Make and implement recommendations for quality system improvements. What You’ll Bring • A minimum of 4 years of quality control experience in the medical device industry; or equivalent combination of education/training and work experience., • Experience working with catheters, endovascular or neurological devices., • Working knowledge about quality system requirements (FDA 21 CFR Part 820 and/or ISO 13485), as they relate to quality control processes and good manufacturing practices., • Strong communications skills (written and verbal)., • Strong ability to perform multiple tasks concurrently with high level of accuracy. Employee Benefits include a stake in our collective success with stock options, competitive salaries, a 401k plan, health benefits, generous PTO, and a parental leave program. Join Us! Apply Today. Salary Range: $79,000 – 86,000/annually Please note that the salary information is a general guideline only. Imperative Care considers factors such as scope and responsibilities of the position, candidate's work experience, education/training, key skills, and internal equity, as well as location, market and business considerations when extending an offer. The posted salary range reflects compensation for employees based in the local Bay Area market. For candidates hired outside of this geographic area, compensation may vary and be adjusted based on location, local market conditions, and other factors The use of external recruiters/staffing agencies requires prior approval from our Human Resources Department. The Human Resources Department at Imperative Care requests that external recruiters/staffing agencies not to contact Imperative Care employees directly in an attempt to present candidates. Complying with this request will be a factor in determining future professional relationships with Imperative Care. Imperative Care will not accept unsolicited resumes from any source other than candidates themselves for either current or future positions. Submission of unsolicited resumes in advance of an agreement between the Human Resources Department and the external recruiter/staffing agency does not create any implied obligation on the part of Imperative Care. Powered by JazzHR ISR0YCQvBm

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at www.coreweave.com. About the role: The Tiger Team, Technical Deployment Lead, will support the expansion of our Data Centers across the U.S and Canada. The Technician must work well with others and will help ensure overall availability and reliability to meet or exceed the defined service levels of the hybrid travel data center operations. This position involves infrastructure delivery on all CoreWeave data centers, training on-site teams, and hardware and network diagnostics. This is a 100% onsite role at one of our West coast region U.S. data centers, with up to 60% of travel required on a rotational basis. What You'll Do: • Nationwide travel to data centers to build and deploy new and ongoing sites, • Implementation and documentation of a global data center standard, • Troubleshoot hardware and networks, • Root cause analysis of hardware and software failures, • Train internal teams, • Perform on-site audits through our set QA/QC process, • Provide technical support to global data center teams, • Develop tools and scripts to update server and networking hardware, • Perform maintenance of test and tools equipment, • Follow-up project support Who You Are: You are a skilled and motivated technician with the ability to influence others who thrives in a fast-paced, hands-on environment. You are passionate about technology and possess the following qualifications: • You have hands-on experience troubleshooting and assembling computer hardware., • You are proficient with the Linux operating system., • You possess a comprehensive knowledge of data center cut sheets and technical documentation., • You have a strong understanding of best practices for cable management and hardware orientation., • You are an effective communicator who collaborates seamlessly with network engineers and project managers., • You excel at time management and take full ownership of your projects to meet demanding deadlines., • You are flexible, with the ability to travel and work in a 24/7 operational environment., • You can lift up to 50 lbs and are comfortable working in elevated locations. (All physical requirements are subject to reasonable accommodations.) The base salary range for this role is $90,000 to $102,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs. The benefits below reflect our US-based offerings for full-time employees; for roles in other locations, benefits vary and are shared during the hiring process. These include: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment, • A work culture focused on innovative disruption California Applicants California Consumer Privacy Act Equal Opportunity & Accommodations CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: careers@coreweave.com. Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job DescriptionBenefits: • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Vision insurance, • 401(k) matching, • Competitive salary, • Dental insurance, • Employee discounts Big O Tires is currently the quickest growing franchise and Ranked #1 on the Franchise 500! We are currently interviewing top-notch candidates for Automotive Lead Service Technicians. We offer an excellent compensation and incentive programs within a progressive work environment. If you are a Shop Leader, with proven high level experience and have diagnostic experience as an automotive Tech and experience advanced mechanical experience, send us your resume for immediate consideration. Job Description The Lead Technician/Mechanic position requires talent and technical expertise to diagnose drivability and electrical systems, while using leadership and mentoring skills in driving a team toward increased customer care and satisfaction. Responsibilities • Diagnose and repair to Mfg. specifications, • Background in all aspects of vehicle repair and maintenance including:, • Complete brake and hydraulic repair experience, • Diagnostics, Exhaust systems and troubleshooting background, • Primary and/or advanced fuel ignition experience, • Electrical, suspension and alignment, air conditioning and computer systems, • Adequately explain technical diagnoses and needed repairs to non-mechanical individuals, • Shop Leader: Complete Vehicle Inspection Program responsibilities as well as training and assisting fellow technicians/mechanics in performing technical activities.What BIG O TIRES offers:, • Excellent compensation based on proven experience., • Kaiser Family Health Program / Dental and Vision Care available, • 5 Day work week (Opened 6 Days a Week), • PTO / Sick Pay, • Paid Vacations / Paid Holidays, • 401K Plan with Matching, • Employee Purchase discounts, • Uniforms Provided, • Opportunities for AdvancementPosition Qualifications:, • Reading, writing and math skills, • Must have a valid automobile driver’s license at all times and be able to pass a DMV Motor Vehicle reposr for Insurance Coverage, • Must have a minimum 3 to 5 years of automotive repair experience, completion of Vocational-Technical School program in a related field or demonstrated skills via third party certificates/assessment., • A.S.E. certification in at least 3 (three) of A1-A8 is required. (New hires with external similar qualifications/certifications will have up to 2 years of employment to comply), • Maintains Federal, State and Local certification/license where applicable., • Ability to communicate technical information to non-technical peopleIf you have a passion for automotive and want to advance your career, you would most likely be a perfect fit. Take the BIG O TIRE CHALLENGE and send your resume for immediate consideration. For immediate consideration please send your resume and contact information to bill.moseley@bigo.com to take the BIG O TIRE Challenge for 2021 !! We are an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, age, sex, religion or national origin. We are committed to building a culturally diverse faculty.

Full Time + Benefits (Medical, Dental, Vision, 401k with Company Match, PTO) Job Type: Onsite Shift: Grave Schedule: 10:00 PM -6:30 AM, Sunday-Thursday Hourly Range: $27.00 - $33.00, DOE Shift Differential: 15% Location: Milpitas, CA Fralock is an engineered solutions provider of specialty components and subassemblies using advanced materials for high reliability, severe environment, and technically challenging applications. We develop and manufacture custom integrated solutions. Established in 1967, we are a critical solutions provider to Fortune 500 corporations, government, and targeted OEMs in a variety of industries including Semiconductor Equipment Manufacturing, Medical and Life Science, Aerospace and Defense, Industrial, Electronics, and Energy. Fralock is headquartered in Valencia, CA with manufacturing locations located throughout Northern and Southern California. To be recognized by our customers as a leading solutions provider of proprietary engineered advanced materials for high reliability, severe environment, and technically challenging applications. To create value, profitably grow, and share our success with all stakeholders. • Respect – We treat others the way they want to be treated., • Integrity – We practice a high standard of ethics in our business dealings with customers, suppliers and employees., • Responsiveness – We have a sense of urgency in responding to internal and external requests, and work proactively to solve problems., • Excellence/Competence – We empower our people to continuously improve and execute high quality work., • Teamwork – We work together to achieve Fralock business objectives by communicating at a high level, by listening and having clarity in our expectations of one another., • Individual Accountability and Personal Responsibility – We do what we have committed to do when we committed to doing it., • Continuous Improvement across all segments of the company This position requires access to information controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR), the successful candidate must be a "U.S. person" as defined in the ITAR and EAR (which generally means (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) have been admitted to the United States as a refugee, or have been granted asylum, as specified under applicable law. The Hazardous Waste Technician will be responsible for implementing and maintaining regulatory requirements relating to the Resource Conservation and Recovery Act (RCRA), Environmental Protection Agency (EPA), Certified Unified Program Agency (CUPA) and Department of Transportation (DOT). This position will be working with engineers and technicians daily to ensure our Engineering and Manufacturing Operations can support the company's goals while meeting all environmental objectives and regulatory requirements. • Responsible for environmental compliance with all applicable federal and state regulations and associated agencies, • Perform tasks related to regulatory hazardous waste handling, waste treatment and discharge storage and disposal requirements per local, state, and federal governing bodies, • Monitor and manage levels of hazardous waste at each department's satellite accumulation area, • Identifying all hazardous material and hazardous waste and ensuring that all stated are properly stored, used and disposed of based on material classification, • Determine waste process and implementation of new waste streams, • Ensure all hazardous material and hazardous waste is properly labeled, • Accurately record and maintain hazardous waste inventory logs and conduct frequent auditing per company's guidelines, • Conduct audits related to the conditions and handling of storage locations, • Prepare and schedule the process in which hazardous waste is disposed of by company guidelines and government regulations, • Implement and control the Spill Prevention Countermeasures and Control Plan (SPCC), • Order, receive, and maintain all materials needed to support containment and disposal method supplies, • Perform environmental compliance and due diligence audits, • Manage hazardous materials and ensure all hazardous materials are labeled and stored properly in the storage areas, • Implementation and maintaining a hazardous materials and hazardous waste program that conforms with local, state, and federal regulations, • Managing hazardous waste storage and accumulation areas, • Deploying and leading emergency response crews in incidents involving hazardous and non-hazardous material releases to air, soil and water, • Knowledge in providing situational PPE requirements based on risk assessment level with the application of hazardous material and hazardous waste in work environment, • Ability to administer general/emergency first aid and CPR, • Demonstrated strong propensity for hands-on work and attention to detail in either academic or career pursuits, • Ability to multi-task, to manage shifting priorities and to follow through on projects with minimal supervision, • Ability to work in a construction/industrial environment, • Ability to communicate well with technicians and engineers, • Strong organizational and communication skills, • Minimum 2-3 yrs. experience in manufacturing environment, • High School Diploma, G.E.D., five (5) years' work experience with accredited certification program, or two (2) years related technical training program/military technical training with two (2) years' work experience., • Manual Dexterity - The ability to grasp, manipulate, or assemble objects and perform maintenance tasks., • Correctable Vision and Hearing., • Ability to stand/walk and perform physical labor for most of the working shift. Pull, push, squat. etc. to accomplish repairs., • Intermittently lift loads of up to 50 pounds All offers of employment at Fralock are contingent upon clear results of a background check. Background checks may include some or all of the following depending on job title and responsibilities: Social Security Verification, Prior Employment Verification, Criminal History, Personal and Professional References, Motor Vehicle Records, Credit History. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of a position. Fralock provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Employment Type: Temp-to-Hire About SiTime SiTime is the Precision Timing company. Timing is the heartbeat of all electronics, ensuring performance, resilience and scalability. For decades, quartz devices, non-silicon technology, have kept systems in sync, but they struggle in harsher, more demanding environments. MEMS-based Precision Timing delivers greater accuracy, smaller size and resilience. Today, MEMS timing powers over 400 applications, including high-growth ones in AI datacenters, automated driving, industrial and humanoid robots, wearables and IoT. Our semiconductor MEMS programmable solutions offer a rich feature set that enables customers to differentiate their products with higher performance, smaller size, lower power, and better reliability. With more than 4 billion devices shipped, SiTime is changing the timing industry. For more information, visit: www.sitime.com. Job Summary The Electronic Lab Technician will be responsible for the growth and support of the electronics test lab in SiTime’s Santa Clara Office. He/she shall perform duties related to the development, test, maintenance, and repair of SiTime products and electronic equipment used in the testing of SiTime products. He/she shall carry out assignments related to prototyping, PCB assembly and debugging, execution of test protocols, managing repair and calibration of electronic lab equipment, and other miscellaneous tasks. Other responsibilities include completion of technical reports, documenting work activities, and maintaining the lab in safe, proper working conditions. Responsibilities: • Assist engineers in device test and qualification activities, including carrying out test procedures, loading devices into test equipment, recording, and organizing data, and utilizing data analysis tools., • Assemble and troubleshoot circuit boards and test fixtures, including hand-solder and reflow solder of chip-scale package devices., • Maintain work area and equipment in safe, proper working conditions., • Troubleshoot issues with bench test equipment or test setup., • Collect and record accurate test or process data for use in problem analysis, product verification, process verification and engineering or manufacturing estimates., • Maintain and repair custom test sockets and fixturing., • Maintain, calibrate, and repair laboratory equipment. Qualifications & Requirements: • AS in Electronics or Electronics Technology, BS a plus, • Minimum 3 years’ experience in a similar role, • Hands-on experience testing semiconductor devices, including experience using ATE and automated bench-test setups., • Hands-on experience with PCB assembly (hand-solder and reflow), including surface-mount and chip-scale packages., • Hands-on experience with Agilent/Keysight bench test equipment such as power supplies, DMMs, oscilloscopes, frequency counters, digital signal analyzers (DSA), network analyzers, • Knowledge of circuit debug, touch-up, and rework, • Ability to create and modify electronic schematics., • Experience creating reports using PowerPoint, MS Excel, MS Word, • Knowledge of MATLAB is considered a plus., • Experience with instrument control using GPIB interface is considered a plus., • Must be able to lift, push, pull up to 30 lbs., • May be required to climb ladders to retrieve or maintain equipment. Desired Characteristics & Attributes: • Good verbal communication skills required., • Ability to work well with others in a fast-paced collaborative team environment., • High level of self-motivation and drive to make an impact., • Strong interest in being hands-on in the lab., • Ability and willingness to work in a highly collaborative, fast-paced team environment., • A positive attitude and motivation to learn new skills. Compensation Range: At SiTime, we believe great work deserves great rewards. We offer a comprehensive and highly competitive compensation package designed to attract top talent. The annual base salary range for this role is $27 – $36 per hour. The final offer is determined by factors such as location, experience, education, and training. In addition to base salary, this role is eligible for a quarterly bonus tied to the achievement of innovation goals—reflecting our commitment to recognizing meaningful impact. We also offer equity grants, providing a meaningful opportunity to share in the company’s future growth and success. Benefits offered: 401k plan, health and wellness that includes medical, dental, vision, life, parental leave, legal services, and time off plans. SiTime is an Equal Opportunity Employer. We treat each person fairly and we do not tolerate discrimination or harassment against anyone on the basis of any protected characteristics, including race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, pregnancy, political affiliation, protected veteran status, protected genetic information, or marital status or other characteristics protected by law. SiTime participates in the E-Verify program. Learn More about SiTime: Review the Get to Know SiTime section of our career page to explore our culture, values, and what makes us unique. • Innovation on Top – Philosophies of Innovation with Rajesh Vashist, • Fabrication Knowledge – An Interview with Rajesh Vashist, • SiTime Corporation – YouTube #LI-SITIME

Job Description Summary The Mobile Radio Technician is a field service position that routinely travels to client sites to install, adjust and troubleshoot mobile radios. This position tests circuits and wiring for mobile radio equipment and communication systems. They work independently and may occasionally need to work with team members. Mobile Radio Technicians also provide coverage for Telecom Technicians on the team. Primary Responsibilities • Establish communications systems by installing, operating, and maintaining voice and data telecommunications network circuits and equipment to the specifications provided., • Install radio communications systems, antennas and GPS equipment into vehicles or mobile command centers., • Troubleshoot and diagnose problems with equipment as necessary, including providing technical support for two-way radio equipment, work with both analog and digital systems, both mobile and portable., • Install, program, maintain, and repair two-way radios, multi-couplers, antenna systems, power systems, and two-way radio dispatch console equipment., • Install and troubleshoot P25 LMR infrastructure equipment at existing and new site locations., • Test, tune, and align duplexers, portable radios and mobile radios., • Set up, configure, and use service and test instrumentation to perform communication tests and maintenance., • Perform coverage drive test., • Conduct site surveys for equipment installation and ensure R56 standards are met., • Prepare site installation and test reports., • Dismantle the interior and exterior of vehicles (seats, carpeting, flooring, dash and interior panels, headliners, lights) to prepare vehicle for installation of new systems. Secondary Responsibilities as Backup Telecom Technicians • Establish communications systems by installing, operating, and maintaining voice and data telecommunications network circuits and equipment to the specifications provided., • Plans network installations by studying customer orders, plans, manuals, and technical specifications; ordering and gathering equipment, supplies, materials, and tools; assessing installation site; and preparing an installation diagram., • Maintain customer rapport by listening to and resolving concerns and answering questions in a timely and productive manner., • Document network by labeling and routing equipment and cables and recording configuration diagrams and specifications, including client labeling standards., • Verify service by testing circuits, equipment, and alarms; and identifying, correcting, or escalating problems., • Maintain network by troubleshooting and repairing outages, testing network backup procedures, and updating documentation., • Enhance department and organization reputation by accepting ownership for accomplishing new and different requests and exploring opportunities to add value to job accomplishments., • Keep supplies ready by inventorying stock, notifying the Warehouse Manager of needed orders, and verifying receipts., • Update job knowledge by participating in educational opportunities and reading technical publications, • Attend installs and site surveys with team to learn alongside more seasoned technicians., • Install, troubleshoot (to the device level), and repair or replace various equipment to maintain the integrity of the bulk electric system and other different client-owned systems., • Work with the client's Control Center to ensure that outages are minimized, and that each client is informed throughout the whole clearance process., • Uphold general housekeeping guidelines, such as leaving a site cleaner than how you found it, using clean/proper cable securing practices, etc. Knowledge, Skills and Abilities • Excellent interpersonal, verbal and written communications skills, • Strong organizational and technical skills, • Regional and overnight travel up to 75%, • Holds a valid CA driver’s license, current insurance, and clean driving record, • Reliable and appropriate transportation that will be able to carry tools and equipment to sites. Example: 3⁄4 ton trucks are not preferred, • Knowledge and understanding of safe work practices around high-voltage equipment and construction/industrial environments, • Must be able and willing to wear Personal Protective Equipment (PPE) i.e., boots, Arc-Rated clothing, • Computer literacy and demonstrated work experience/knowledge of the Microsoft Office suite, • Excellent client service and interpersonal skills are required, • Strong troubleshooting skills and attention to detail, • Experience installing fiber-optic and copper network infrastructure and creating low-voltage power connections preferred, • Experience with low voltage work required, • Ability to do basic construction and operate tools (For example: drill and mount a switch in racks or under a conference room desk), • Ability to read communication wiring diagrams, rack elevation drawings, and construction packages Education and Work Experience • 2+ years mobile radio installation / technician experience required, • 1+ years telecommunications technician experience supporting IT projects, preferred, • Associate’s Degree with 2+ years’ experience or Bachelor’s Degree with 1+ years’ experience Physical Requirements Work is sometimes performed in an environment, using simple, easy muscular movements, involving only the handling of light materials, tools, or equipment in easy work positions, and with no special speed requirements or long stretches of exertion. Vision requirements for this job include close vision and the ability to focus. Remaining in a stationary position and in front of a computer screen for prolonged periods will be necessary. Repeating motions such as typing, that may include wrists, hands and/or fingers are necessary. Moderate physical effort may be necessary. May require stooping, bending, kneeling, periodic lifting up to 50 pounds, crawling and walking. Requires dexterity to connect network and server equipment, peripherals, and make minor repairs to computer equipment. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. As the growth of the company continues, this job description and associated tasks will develop according to the needs of the company with or without notice. #zip \nCompany Description We are a services-based company, providing engineering and infrastructure solutions to industries impacting and enhancing the daily lives of people across the country. We are a services-based company, providing engineering and infrastructure solutions to industries impacting and enhancing the daily lives of people across the country.

Job Description About R&G Telecomm Group R&G Telecomm Group supports carrier-grade network infrastructure deployments across the Americas. We partner with global technology manufacturers and network operators to deliver installation, deployment, and field-level support services within central offices, POPs, and data center environments. Our culture is built on ownership, accountability, and technical precision. We value professionals who take pride in their execution, work well in high-responsibility environments, and represent the company with integrity at customer sites. Position Summary The Central Office & Data Center Technician plays a critical role in supporting the execution of carrier-grade network deployments across central office and data center environments. This position is responsible for ensuring high-quality installation standards, maintaining site integrity, and supporting field-level troubleshooting activities within live network environments. Key Responsibilities Installation & Build-Out • Perform rack-and-stack of telecom and optical transport equipment, including racks, shelves/chassis, patch panels, and cable management systems., • Install and connect AC/DC Power Cabling, • Run, dress, terminate, and patch fiber and copper cabling between equipment and patch fields (ODF/MDF/cross-connects)., • Maintain professional cable management standards (bend radius compliance, accurate labeling, cleanliness)., • Support site infrastructure tasks such as mounting hardware, ladder rack/cable tray support, and equipment placement per site standards., • Maintain accurate as-built documentation, including port maps, patching logs, redlines, and completion photos. Troubleshooting & Field Support • Perform onsite troubleshooting of physical layer issues (incorrect patching, dirty connectors, loose connections, damaged cables)., • Support equipment card replacements and assist with provisioning/turn-up activities., • Participate in maintenance windows and urgent break-fix/outage response in coordination with the deployment team., • Assist with fiber testing using tools such as OTDR and power meters when required. Carrier & Optical Equipment Experience Hands-on experience working with carrier-grade telecom and optical transport equipment such as: • Ciena (6500, Waveserver or similar platforms), • Nokia optical transport systems, • Infinera systems, • DWDM transport platforms, • IP routers and carrier switches, • Experience with equivalent carrier optical platforms is acceptable., • Experience with OSA, FIBERSCOPE. Required Qualifications • 2+ years of hands-on experience in telecom, central office, or data center environments, • Experience with rack & stack and structured fiber installations, • Exposure to carrier-grade network environments (transport/backbone systems), • Ability to read and follow technical documentation, diagrams, and MOPs, • Strong documentation discipline and attention to detail, • Ability to work independently and as part of a crew, • Professional communication skills, • English required; Spanish is a plus, • Willingness to travel up to 90% Work Conditions • Extensive travel required (primarily within the United States, with regional travel across the Americas as needed), • On-call shifts, nights, weekends, and maintenance windows may be required, • Ability to lift up to 50 lbs. and work in industrial/data center environments Work Authorization & Site Requirements Candidates must be legally authorized to work in the United States and able to access customer sites as required. Depending on customer or project requirements, background checks, drug screening, or additional site clearance processes may be required. Compensation & Benefits Base salary: $45,000 – $50,000 per year Benefits include 401(k) matching, paid time off, and paid training. Equal Opportunity Employer R&G Telecomm Group is an Equal Opportunity Employer and considers all qualified applicants in accordance with applicable law.

Job Description AOI Technician - Day Shift (NVD) Location: San Jose, CA Job Type: Full-Time, Contracted Department: Manufacturing Reports To: Engineering Supervisor Position Summary Foxconn is seeking a detail-oriented AOI Technician to support our Printed Circuit Board Assembly (PCBA) manufacturing operations. The AOI Technician is responsible for operating, programming, maintaining, and optimizing Automated Optical Inspection (AOI) equipment to ensure product quality and compliance with customer specifications. This role works closely with Manufacturing Engineering, Process Engineering, Quality, and Production teams to identify defects, improve inspection effectiveness, and support New Product Introduction (NPI) activities. The ideal candidate has experience in electronics manufacturing, PCB assembly processes, IPC standards, and AOI inspection systems. Key Responsibilities Operate and monitor AOI equipment to inspect PCB assemblies throughout the manufacturing process. Create, modify, optimize, and validate AOI inspection programs for new and existing products. Perform first article inspections and verify inspection accuracy prior to production release. Analyze AOI inspection results, identify false calls, and optimize inspection parameters to improve detection accuracy and reduce unnecessary rejects. Troubleshoot AOI equipment, programs, and inspection-related issues to minimize production downtime. Collaborate with Manufacturing Engineering and Process Engineering to improve inspection coverage and manufacturing yield. Review PCB assemblies for solder defects, missing components, polarity issues, placement accuracy, insufficient solder, bridging, tombstoning, lifted leads, and other assembly defects. Escalate recurring quality issues and support root cause investigations and corrective actions. Support New Product Introduction (NPI) builds by developing and validating AOI inspection programs. Maintain AOI equipment, perform routine preventive maintenance, and coordinate repairs with equipment vendors when necessary. Verify compliance with IPC workmanship standards and customer quality requirements. Maintain accurate inspection records, production documentation, and equipment logs. Work closely with Quality, Production, SMT, and Test teams to resolve manufacturing issues. Participate in continuous improvement initiatives to enhance product quality, throughput, and inspection efficiency. Maintain a clean, organized, and safe work environment in accordance with company policies. Perform other duties as assigned. Required Skills Working knowledge of PCB assembly and SMT manufacturing processes. Experience with AOI systems (TRI). Other systems experience accepted. Ability to interpret assembly drawings, Gerber files, BOMs, assembly instructions, and engineering documentation. Familiarity with IPC-610 workmanship standards. Knowledge of common SMT defects and failure modes. Basic understanding of solder paste printing, SPI, SMT placement, and reflow processes. Ability to troubleshoot AOI programs and optimize inspection performance. Proficiency with Microsoft Office applications. Education Associate degree or technical certification in Electronics, Manufacturing Technology, Industrial Technology, or a related field preferred. Minimum of 2 years of experience operating or programming AOI equipment in a PCBA or electronics manufacturing environment. Experience supporting SMT manufacturing processes is highly preferred. Experience with New Product Introduction (NPI) is a plus. Day Shift - with occasional Swing Shift Contracted Non-Exempt, Full Time Status Pay Range: $26 - $33/hour Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR ULizgLdsup

We resource the world and help our customers solve their environmental and sustainability challenges. By joining our team, you'll be part of the ecological transformation across energy, water, and waste. Shipping and Receiving Coordinator Veolia Rancho Cordova, CA, USA Warehouse Associate Veolia Providence, RI, USA Environmental Driver Specialist CDLA Veolia Richmond, VA, USA CDL A Driver Veolia Richmond, VA, USA Millwright Veolia NA Toronto, ON, Canada Household Waste Technician – Part Time Veolia NA East Chicago, IN, USA Industrial Maintenance Millwright Veolia NA Burnaby, BC, Canada Maintenance Technician II Veolia NA Palmetto, FL, USA Approvals Chemist Veolia NA Arkadelphia, AR 71923, USA Water Treatment Project Controller Veolia NA Haworth, NJ, USA Powerhouse Operator Engineer II Veolia NA Milwaukee, WI, USA Associate Project Engineer Veolia NA Boston, MA, USA Operator I Veolia NA Borger, TX 79007, USA Operator I Veolia NA East Palo Alto, CA, USA Maintenance Technician II – Water/Wastewater Plant Veolia NA Palmetto, FL, USA Environmental Technician I Veolia Glencoe, AL, USA Environmental Driver Specialist CDL B Veolia San Jose, CA, USA Operator II Veolia NA Johnstown, OH 43031, USA Field Service Technician Veolia NA Mocksville, NC 27028, USA Material Handler I Veolia NA Corsicana, TX, USA

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company parties, • Competitive salary, • Dental insurance, • Employee discounts, • Flexible schedule, • Free food & snacks, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Parental leave, • Training & development, • Tuition assistance, • Vision insurance, • Wellness resources BENEFITS • Medical, Dental, Vision and 401k, • Paid time off, • Growth opportunities, • Paid training, • Discounts on Products and Services, • Five-day work week, closed on Sundays JOB DESCRIPTION Meineke is currently seeking Automotive Technicians to become an integral part of our team. Walk-ins applicants are Welcome! Business is booming! Now is the time to elevate your automotive service technician career with Meineke. You will diagnose, repair and maintain automotive vehicles. We are currently seeking technicians with a minimum of one year experience and will compensate based on your production, ranging from $25-50+ hourly. Having a smog license increase your earning potential even higher, but is not required. Come join us as we work towards the future of Automotive! RESPONSIBILITIES • Diagnose and repair automotive vehicles, • Perform routine vehicle tune-ups and maintenance, • Perform thorough multi-point inspections to identify opportunities for additional maintenance, • Completing repairs and maintenance in a timely fashion. Ensuring that the customer’s vehicle is repaired and maintained both efficiently and seamlessly is a significant aspect of your role, • Delivering an exceptional customer experience. You are expected to treat a customer as you would a guest in your home. This level of service creates a strong and lasting impression on the customer and goes a long way toward creating an exceptional customer experience.EQUAL OPPORTUNITY We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. QUALIFICATIONS • Deep understanding of automobiles and speedy diagnostic abilities, • Effective analytical and communication skills and eagerness to improve, • Ability to learn new technology, repair and service procedures and specifications, • Ability to operate electronic diagnostic equipment, • High School Diploma or GED (preferred), • ASE Certification/Technical degree (preferred), • Valid driver’s license and clean driving record Why Meineke? • Meineke values personal and professional growth., • Benefit from ongoing training and development programs to enhance your automotive knowledge and stay up-to-date with the latest industry trends and advancements., • Join a team of driven and talented individuals who share your passion for high-quality repair work. Experience a supportive and collaborative work environment that encourages growth and camaraderie., • With locally-owned Meineke shops, experience a sense of community and connection with your customers and fellow team members.

Job DescriptionCompany Description Fusion Life Sciences Technologies (www.fusionlifesolutions.com ) is a WBE-certified Healthcare Staffing and Engineering Services provider supporting industries including Pharma, Medical Devices, Aeronautical, Supply Chain, Heavy/Light Industrial, Food & Beverage, and Automotive. We proudly partner with 120+ clients such as Johnson & Johnson, Haemonetics, Delta, Caterpillar, Artisan Chef, Baxter, and many more. Our wide network of consultants and contract-to-hire engineers brings deep expertise across Engineering, Technical, Administrative, Healthcare, Life Sciences, Blue Collar, Skilled Trades, IT, Software Development, Manufacturing, and Supply Chain sectors. What sets us apart is our AI-powered, in-house software's enabling us to source and screen top talent within hours. This ensures rapid response times, high-quality matches, and virtually zero attrition. Job Description Title: Equipment Technician II Location: 5480 Great America Pkwy, Santa Clara, CA 95054 Duration: 6-8 Months Contract Job Description: Client is seeking an Equipment Technician II to support manufacturing and test equipment in a regulated medical device environment. This role is responsible for preventive maintenance, equipment troubleshooting, calibration, and supporting production uptime while ensuring compliance with GMP and quality standards. Key Responsibilities • Perform preventive maintenance (PM), calibrations, and corrective maintenance on manufacturing and test equipment., • Troubleshoot electro-mechanical, pneumatic, and mechanical equipment issues., • Restore equipment to operational status while minimizing production downtime., • Assist with installation, qualification, and commissioning of manufacturing equipment., • Document maintenance activities using CMMS., • Read and interpret schematics and technical documentation., • Support manufacturing operations by ensuring equipment availability., • Follow GMP, safety, and documentation requirements. Qualifications • Associate degree or equivalent technical education preferred., • 2+ years of experience supporting capital equipment in a regulated manufacturing environment., • Experience with electro-mechanical equipment and diagnostic tools., • Familiarity with CMMS systems., • Medical device manufacturing experience preferred. Preferred Skills • Preventive Maintenance, • Equipment Calibration, • Pneumatics, • Mechanical Troubleshooting, • Electrical Troubleshooting, • GMP Documentation, • CMMS, • Manufacturing Equipment Support Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Title: Audio Visual Technician Location: South San Francisco, CA Department: Audio Visual Services Schedule: Full-time, flexible availability including nights and weekends as required General Summary: The Audio Visual Technician is responsible for delivering professional, high-quality AV support across conference rooms, event spaces, and offsite locations. This role will be focused on Live Event Support as well as setup, operation, troubleshooting, and teardown of AV systems, and supporting hybrid/virtual meetings. Technicians will manage assigned tickets, respond to urgent requests, and execute preventative maintenance tasks in a fast-paced corporate environment. The ideal candidate is proactive, client-focused, highly organized, and adaptable to changing priorities.Key Responsibilities: Event & Meeting Support • Set up, operate, and troubleshoot AV systems for in-room meetings throughout campus Provide technical support for events in large venues, conference rooms, and offsite venues. This includes pre-meeting preparations, rehearsals and testing, • Execute complex event support in key events spaces including Webcasting, audio mixers as A-1 tech, video switching, lighting systems, video camera operation, content and media management and operation to name a few, • Operate virtual collaboration tools (Google Meet, Zoom, MS Teams, etc.) and support remote presenters or participants., • You will be expected to adapt to varying levels of technical complexity, as support requirements may differ based on the specific needs of each meeting or event Webcasting & Video Production:, • Responsibilities include pre-meeting consultations and prep, set up and operate webcast equipment, monitor and control the live stream ensuring quality and stability across video, audio, and overall connectivity, viewer analytics, and redundancy, • Support post-production tasks such as video editing using platforms like Adobe Premiere (preferred). Upload finished tasks to the local portal, • Collaborate with webcast technicians supporting in-room requirements during multi-tech webcast events to ensure seamless delivery.Preventative Maintenance:, • Perform regular preventative maintenance in key event space and high-complex conference rooms, • Identify and report faulty equipment, and proactively suggest improvements or replacements.Client Communication & Service Excellence:, • Act as a professional liaison between AV services and clients, ensuring clear, timely communication, • Verify and clarify AV requirements prior to events, proactively resolve issues, and manage expectations, • Maintain composure and professionalism during high-stress or time-sensitive situations. Ongoing training in client event spaces to ensure proficiency with advanced AV systems and complex event technologies, • Arrive on time for assigned meeting and event support, onsite or offsite. This goes without saying. Technical & Administrative Tasks:, • Accurately record all AV support activities in OPUS and ServiceNow, ensuring timely closure of service tickets, • Stay current on equipment updates and emerging AV technologies., • Maintain timely communication to confirm availability for urgent support needs, and proactively update key groups in designated chat groups, including critical information related to AV room status, issues and solutions, • Support data/reporting tasks and process feedback to improve services.Backup Queue Coordination (As Needed):, • Support ticket prioritization, technician dispatching, and communication in the absence of the AV Queue Coordinator as a shared responsibility amongst other technicians, • Assist with monitoring urgent AV requests and routing them appropriately.Required Qualifications:, • High school diploma or equivalent required., • 2+ years of experience in AV live event support or a related technical role., • Strong working knowledge of AV signal flow, audio mixing, projection systems, and control interfaces., • Familiarity with hybrid meeting platforms (Zoom, Google Meet, MS Teams, etc.). Experience with Mac and PC platforms, and collaborative tools such as Google Slides, Sheets, Docs, and Microsoft Excel., • Excellent customer service and communication skills—both written and verbal., • Able to lift up to 50 lbs. unassisted and 100 lbs. with assistance.Preferred Qualifications:, • Experience with video production, live streaming, and post-event editing (Adobe Premiere or similar)., • A1 Live Audio Mixing experience, V1 Level Cam Operator Familiarity with video switching, PTZ cameras, and lighting systems., • Experience in High Level AV Support in Conf Rooms in Corporate Environments Understanding of SNOW (ServiceNow) ticketing systems or similar, • Valid driver’s license and access to a reliable vehicle for your commute to maintain consistent and timely attendance

Job DescriptionFST Technical Services is your global partner in the Semiconductor and Microelectronics industry! Come join a fantastic team in an exciting, fast paced, and ever-growing industry! FST is seeking an experienced Electrical Technician in Santa Clara, CA. Role: Electrical Technician Schedule: Day shift, 12 hours shift, compressed work week schedule Job Responsibilities: • Perform repairs, preventive and predictive maintenance of all the electrical distribution systems., • Conduct daily rounds and readings., • Work from drawings, schematics, and other electrical documentation., • Collaborate with other discipline technicians to support mechanical and process equipment., • Use and update electrical procedures for electrical maintenance and operation. Experience / Requirements: • Field experience within all aspects of electrical maintenance and troubleshooting of facilities equipment and systems., • Experience in a sustaining environment such as maintenance requirements for industrial electrical facility systems, such as electrical distribution (up to 15kv), switchgear, generators, and variable frequency drives., • Experience with electrical metering and testing equipment including multi-meter, ground fault detector, VLF, and IR camera, reading single-line electrical diagrams, schematics, and blueprints., • Experience covered by National Electrical Code (NEC70), Recommended Practice for Electrical Equipment Maintenance (NFPA 70B), and Standard for Electrical Safety in the Workplace (NFPA 70E)., • Lift 30 lbs 3 times a day on average., • Preferred experience in Semiconductor or Pharmaceutical industries.“FST Technical does not offer employment-based visa sponsorship for this position. Applicants must be legally authorized to work in the United States without the need for employer sponsorship now or in the future.” Hourly pay range: $30/HR to $40/HR - based on experience Powered by JazzHR Qg6nJCLM7z

Job DescriptionFST Technical Services is your global partner in the Semiconductor and Microelectronics industry! Come join a fantastic team in an exciting, fast paced, and ever-growing industry! FST is seeking an experienced Mechanical Technician in Santa Clara, CA. Role: Mechanical Technician Schedule: 12 hours shift, compressed work week schedule Job Responsibilities: • Perform repairs and preventative maintenance on a wide variety of building and facility equipment, fixtures and systems., • Conduct daily rounds and readings., • Installs, troubleshoots, repairs and maintains a wide variety of facility plumbing, mechanical, heating and cooling systems., • Conducts preventative maintenance inspections and performs required preventative maintenance duties., • Assignments are semi-routine in nature with work performed within generally defined parameters., • Some degree of judgment required in resolving non-standard problems.Experience / Requirements:, • Experience in facility mechanical systems operations and maintenance (boilers, chillers, compressors, HVAC, building exhaust, water movement, etc.)., • Lift 30 lbs 3 times a day on average., • Preferred experience in Semiconductor or Pharmaceutical industries.FST Technical does not offer employment-based visa sponsorship for this position. Applicants must be legally authorized to work in the United States without the need for employer sponsorship now or in the future. Hourly pay rate: $30/HR to $40/HR - based on experience Powered by JazzHR tzpbNo8pgd