Trabajos process safety engineer en BirminghamCrear alertas

Field Service Technician \n Day shifts – Monday to Friday \n Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? \n If so, then this could be the role for you? \n We are looking for a self motivated and independent Vehicle Engineer who can travel to our clients various workshops in a designated area providing: \n Your day starts when you start your vehicle!. Your commute is from your front door to your fully expensed and kitted out Light Commercial Vehicle \n In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV’s, Ground Support GSE, RORO (Roll on Roll Off), Fire and rescue, Tractors and Tugs plus other bespoke operating platforms. \n We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing: \n\n • Callouts \n, • Preventative Maintenance \n, • Emergency Breakdowns \n, • Pre-arranged servicing at rural sites \n, • MOT Preparation \n, • Engine work and diagnostic investigations \n, • Correction of running defects\n, • Chassis and fabrication work\n, • Hydraulics and pneumatics\n, • Improvement of vehicle standards\n, • Electrical and wiring inspections and corrections\n\n Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required. \n A Class2 Licence would be beneficial. \n You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship. \n Benefits – you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme. \n If this role isn’t for you but you are looking for a move, then please get in touch. \n Kautec Recruitment is a fast growing automotive people business that recruits the right way. \n HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. \n A problem solver with a can-do mindset \n Abiding by health and safety rules \n We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completion \n The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; \n Reliable and punctual \n Enthusiastic, proactive and an innovative thinker

Refrigeration Engineer - Building Services Maintenance - Up to 55k + Vehicle + OvertimeWe are recruiting for a Refrigeration Engineer to work in a Service and Maintenance team, this role is based from home working across the Midlands of the UK, Onsite repairs and working with other engineers to help them during their tasks.The organisation has seen steady growth doubling in size over the past few years and has contracts signed up a full order book through to 2029 already.Performing PPM's, repairs, installations and call outs there is an on-call rota 1 in 6 currently across the NorthRefrigeration Engineer - Package·Salary basic upto £55000 ote £65000 - £75000·40hr week ·Door to Door·Vehicle ·25 Days holiday & bank holidays·On call payments·OT time weekdays and evenings and weekends.·Private PensionRefrigeration Engineer - Requirements·Used to performing PPM's and Repairs to various Commercial Refrigeration Systems - Essential·Mechanical Background & Health and safety knowledge - Essential·C&G or NVQ level2 or above trained - Desirable·DBS Checked - Essential·Valid UK Driving Licence - Essential·FGas Qualified - EssentialThis would suit someone who has worked within Building services, M&E, Construction, Industrial Maintenance, Facilities Management, Fire & Security or Hire organisation or within other industries.We will accept applications from those who have worked as an Refrigeration Engineer, Refrigeration Technician, AC Engineer, Static Maintenance Engineer, Gas engineer, Air-conditioning Technician, Air Conditioning Engineer, Refrigeration Supervisor, Lead Refrigeration Technician, Refrig Engineer, HVAC Engineer, HVACR Engineer, Service Engineer, Mechanical Engineer, Multiskilled Engineer.Russell Taylor acts as an employment agency in respect of this position. Please note, due to a high volume of applications, you may not receive a response if unsuccessful.Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us .

Production Engineer – Electrical Engineer – Manufacturing – Cannock \n \n Brooklyn Recruitment currently have an exciting role available in the Cannock area for a Production Engineer / Electrical Engineer within the electrical manufacturing sector. This role would suit someone with extensive electrical / control panel experience within a manufacturing environment dealing with projects from cradle to grave. \n \n This company have an excellent working environment with the building being light, bright and clean. You would be joining a strong Team Leading team so have lots of others to bounce ideas off etc. The company have a total workforce of around 200 but they still have a family friendly feel to it, where everyone is known by name and you even get your birthday off! \n \n As Production Engineer / Electrical Engineer you will be: \n\n • Supporting the NPI process.\n, • Converting drawings to point to point.\n, • Driving continuous improvement activities through SQCDP\n, • Building relationships with your assigned customers.\n, • Ensuring compliance to regulations.\n, • Being technically responsible for your assigned new products.\n, • Approving production hours.\n, • Ensuring the accuracy of BOM’s.\n, • Keeping customers updated on any timescales or issues.\n, • Ensuring Health and Safety measures are adhered to.\n, • Dealing with any quality concerns.\n, • Confirming customer acceptance.\n, • Recording downtime and finding ways to limit it.\n, • Other duties as required.\n\n \n The working hours for this Production Engineer / Electrical Engineer’s role are excellent: \n Mon – Thurs 8am – 5.15pm \n Fri 8am – 12pm \n \n In return for all of your hardwork as Production Engineer / Electrical Engineer you will be rewarded with a generous salary, a friendly working environment, death in service, 5% matched pension, health benefits, your birthday off and excellent promotional and training opportunities. \n \n Keywords: Production Engineer, Electrical Engineer, NPI, Control panel, looms, power panels, Cannock, Production, Manufacturing, Controls, Electrical, Electrics, Burntwood, Hednesford, Heath Hayes, Lichfield, Brownhills, Pelsall, Bloxwich, Wolverhampton, Walsall, Stafford, Rugeley

Basic information Location Birmingham, Leeds, London, Manchester Business Line Strategy, Risk & Transactions Advisory Job Type Permanent / FTC Date published 30-Jul-2026 Req # 23416 Job description Connect to your IndustryThroughout the health ecosystem, you’ll find courageous and inspiring people who are committed to driving transformation, advancing health equity, and leading a well-being revolution. Where you find innovators committed to sustainable progress, you’ll find Deloitte’s Life Sciences & Health Care practice. Our leaders work side-by-side to orchestrate and deliver on the business of science and health. We bring trusted, flexible approaches that foster innovation, harness new technologies, and formulate patient-driven strategies to engineer a digitally enabled, equitable future of health – starting today.Life SciencesWe are at global crossroads as regulators and policymakers bring a wave of new laws and regulations aimed at regulating the therapies and new technologies that will transform our health and well-being.Across life sciences you’ll find innovators who are developing therapies, treatments, devices, and cures to meet society’s most pressing health challenges and deliver wellness for all. Alongside them, you’ll find our leaders, the professionals of Deloitte’s Life Sciences practice, who are orchestrating and delivering the business of science and health. We help drive impact through deep industry experience and insights; transformative strategies; trusted, flexible approaches; and new technologies. We help accelerate action and create connections that empower a digitally enabled, equitable future of healthConnect to your career at Deloitte Deloitte drives progress. Using our vast range of expertise, we help our clients' become leaders wherever they choose to compete. To do this, we invest in outstanding people. We build teams of future thinkers, with diverse talents and backgrounds, and empower them all to reach for and achieve more. What brings us all together at Deloitte? It’s how we approach the thousands of decisions we make every day. How we behave, our beliefs and our attitudes. In other words: our values. Whatever we do, wherever we are in the world, we lead the way, serve with integrity, take care of each other, foster inclusion, and collaborate for measurable impact. These five shared values lead every decision we make and action we take, guiding us to deliver impact how and where it matters most.Connect to your opportunity Deloitte’s Ethics, Risk and Compliance practice is formed of a multi-disciplinary team that includes governance, risk and compliance specialists, lawyers, trust & safety professionals, auditors, technologists, and digital regulation and policy experts working in collaboration with specialist teams across Deloitte.Within this, we are looking to grow our healthcare and life science practice with highly motivated and collaborative individuals who will bring an understanding of risk and regulatory compliance issues along with project delivery skills, aimed at defining and delivering bespoke regulatory compliance solutions and building strong & trusted relationships with our target clients.Our team works with some of the largest and most complex healthcare and life sciences organizations in the world. Successful candidates will demonstrate successful experiences in professional services and evidence ability invest in relationships and shape opportunities to develop new business Connect to your skills and professional experience You’re adaptable and able to understand and assimilate regulatory issues across different types of industries and to develop insights into how these issues might affect different types of businesses and can change direction quickly as industry standards emerge or client priorities change.You take a pragmatic approach to compliance centered on a solid understanding of risk, regulation and compliance in healthcare and life sciences contests, thus enabling us to provide sound advice to our clients to help them meet the challenges they face and minimize risks in an effective, efficient, and coherent manner.You’re passionate about technology and innovation, and thoughtful about the drivers for regulatory transformation (chiefly driving increased speed and quality across the regulatory value chain) and the wider regulatory ecosystem in which our clients operate.We encourage an agile approach to working and we expect an individual to work in a way that meets both the needs of the clients, the team, and their personal situation.Essential Skills/Knowledge:Excellent client relationship skills and experience and a track record of large-scale business development and market-makingExtensive background in risk and regulatory topics either in industry or professional servicesProven track record of delivering complex projects, often to tight timelines, and meeting scope, budget and quality requirementsStrong experience within the Life Sciences industry, with all or some of the following:Regulatory operating model transformationsRegulatory digital transformations / innovationsSubmissions management, labeling, CMC change control and/or LCM processesQuality Management SystemsUnderstanding of regulatory data and regulatory filing requirementsKnowledge around generating submissions packagesDelivered AI/GenAI solutions for regulatory content or regulatory intelligenceLeading M&A regulatory workstreams (due diligence / separations / integrationsOpen to travel to client sites and/or flex working hours to match client as required by this positionDesirable Skills:Ability to orchestrate, lead, and influence virtual teams, ensuring successful implementation of customer projectsExperience supervising and guiding team members, with coaching/mentoring, objective setting, performance management and career developmentPresentation skills with a high degree of comfort with both large and small audiencesDemonstrated experience driving both the sales cycle by taking the lead in framing out client opportunities and leading the pursuit team to create the proposal content for client discussionsStrong problem solving and troubleshooting skills with the ability to exercise mature judgmentDemonstrated experience with management and delivery of multiple strategic engagements for large global organizationForeign language skills and/or proven record of working across/with different geographiesIndividuals should have all or some of the following personal skills:Team-working and inclusive working styleInnovative in working style and natureExcellent communications skills (including presentations, report and proposal writing)Good commercial acumen; Confidence in navigating complexity and ambiguityAbility to work as part of a global diverse team in an agile environmentProblem solving to help build solutions for clients by applying insight and experience.Connect to your business – Strategy, Risk & Transactions AdvisoryIn an ever-evolving world, there are no certainties in business. Our teams help clients to navigate risks, process major transactions and deliver transformational change that will future-proof their business. Join us to make a positive difference.Regulatory & Financial RiskWe provide advisory services across the risk and regulatory landscape to help our clients move beyond simply meeting the minimum compliance standards, to strategically creating a responsible, sustainable future. This includes providing critical insight and advice on the future of regulation to assist our clients in anticipating change and responding with confidence. Personal independenceRegulation and controls are standard practice in our industry and Deloitte is no exception. These controls provide important legal protection for both you and the firm. We are subject to a number of audit regulations, one of which requires that certain colleagues abide by specific personal independence constraints (e.g., in relation to any financial interests and employment relationships). This can mean that you and your "Immediate Family Members" are not permitted to hold certain financial interests (shares, funds, bonds etc.) with audit clients of the firm, and also prohibitions on certain employment relationships (e.g., you are not permitted to hold a secondary employment role with SEC audit clients of the firm whilst being employed by the firm). The recruitment team will provide further detail as you progress through the recruitment process or you can contact the Independence team upon request.Connect with your colleagues “At Deloitte you’re surrounded by subject matter experts; industry experts, technology experts, and you can access that knowledge whenever you need to.” - Christian, Strategy, Risk and Transactions Advisory "We have a great culture, and the number of opportunities here mean you can develop as an individual in the direction that suits you best." -Gurpal, Strategy, Risk and Transactions AdvisoryOur hybrid working policyYou’ll be based in one of our UK offices, with hybrid working.At Deloitte we understand the importance of balancing your career alongside your home life. That’s why we’ll support you to work flexibly through our hybrid working policy. Depending on the requirements of your role, you’ll have the opportunity to work in your local office, virtual collaboration spaces, client sites and remotely. You’ll get the chance to meet face to face when needed, while you collaborate and learn from colleagues, share your experiences, and build the relationships that will fuel your career and prioritise your wellbeing. Please check with your recruiter for the specific working requirements that may apply for your role.Our commitment to you Making an impact is more than just what we do: it’s why we’re here. So we work hard to create an environment where you can experience a purpose you believe in, the freedom to be you, and the capacity to go further than ever before. We want you. The true you. Your own strengths, perspective and personality. So we’re nurturing a culture where everyone belongs, feels supported and heard, and is empowered to make a valuable, personal contribution. You can be sure we’ll take your wellbeing seriously, too. Because it’s only when you’re comfortable and at your best that you can make the kind of impact you, and we, live for.Your expertise is our capability, so we’ll make sure it never stops growing. Whether it’s from the complex work you do, or the people you collaborate with, you’ll learn every day. Through world-class development, you’ll gain invaluable technical and personal skills. Whatever your level, you’ll learn how to lead.Connect to your next step A career at Deloitte is an opportunity to develop in any direction you choose. Join us and you’ll experience a purpose you can believe in and an impact you can see. You’ll be free to bring your true self to work every day. And you’ll never stop growing, whatever your level.Discover more reasons to connect with us, our people and purpose-driven culture at deloitte.co.uk/careers

Generator Engineer – UK Visa SponsorshipDepot Based | Solihull, West Midlands | Permanent Position | Sponsorship AvailableWe are currently recruiting for three Generator Engineer positions with a leading power generation and equipment rental business, based at their depot in Solihull, West Midlands.These are excellent opportunities for experienced generator engineers currently living outside the UK who are looking to relocate to the United Kingdom. UK visa sponsorship is available for suitable candidates.You will join an established engineering team responsible for the inspection, servicing, repair and preparation of a large fleet of diesel generators and power generation equipment.The RoleYou will be responsible for ensuring generators are fully serviced, repaired, tested and ready for deployment to customer sites across the UK. The role is hands-on and would suit an engineer with strong practical experience working on diesel engines, generators, electrical systems and associated equipment.Key Responsibilities\n\n • Service, maintain and repair diesel generators and associated power generation equipment.\n, • Diagnose and rectify mechanical and electrical faults.\n, • Carry out engine servicing, repairs, strip-downs and rebuilds.\n, • Test generators and associated equipment to ensure they are safe and fully operational.\n, • Carry out inspections on equipment returning from hire and identify required repairs.\n, • Complete preventative maintenance and pre-delivery inspections.\n, • Fault-find on electrical systems, control panels and generator controls.\n, • Prepare equipment for customer deployment.\n, • Complete accurate service records and maintenance documentation.\n, • Work closely with the depot and operations teams to ensure equipment is available when required.\n, • Maintain a clean, safe and organised workshop environment.\n, • Follow all company Health & Safety procedures and engineering standards.\nWhat We're Looking ForWe are particularly interested in engineers with previous experience working on:\n\n, • Diesel generators / gensets\n, • Power generation equipment\n, • Industrial engines\n, • Heavy plant and machinery\n, • Generator hire or rental equipment\n, • Construction plant\n, • Industrial mechanical/electrical equipment\n, • Marine or other diesel-engine environments\nQualifications & Experience\n\n, • Relevant technical qualification in Mechanical Engineering, Electrical Engineering or a related discipline.\n, • Strong practical experience working with generators, diesel engines or similar equipment.\n, • Good understanding of both mechanical and electrical systems.\n, • Experience diagnosing faults and carrying out repairs independently.\n, • Workshop, depot, plant or equipment maintenance experience.\n, • Good problem-solving skills and attention to detail.\n, • Willingness to relocate to Solihull, UK.\n, • Ability to meet the requirements for UK visa sponsorship.\nUK qualifications are not essential where you can demonstrate strong relevant engineering experience and appropriate technical qualifications from your home country.Why Relocate to the UK?This is a genuine opportunity to establish a long-term engineering career in the UK with an established business operating within the power generation sector.The successful candidates will receive:\n\n, • UK visa sponsorship\n, • Permanent employment\n, • Competitive salary\n, • Overtime opportunities\n, • Technical and manufacturer training\n, • Career development opportunities\n, • A structured and supportive engineering environment\n, • The opportunity to work with a wide range of modern generator and power generation equipment\n, • Support with the relocation process\nLocation Solihull, West Midlands, United KingdomThis is a depot/workshop-based position. You will not be required to work as a travelling field engineer.Apply NowIf you are an experienced Generator Engineer, Generator Technician, Power Generation Engineer, Diesel Engine Engineer or Plant Engineer currently based outside the UK and are interested in relocating to the UK, we would like to hear from you.Three positions are currently available.

Bucci Industries Group is a global leader in industrial automation, robotics, and advanced composite materials. In the automation field, it is represented by Bucci Automations S.p.A., with the brands Iemca, Giuliani, Sinteco, Vire, and Zeta, while Bucci Composites S.p.A. designs and manufactures components made of advanced composite materials. \n \n For Bucci Industries UK Limited, based in Cheltenham, we are looking for a Field Service Engineer to support our IEMCA brand in the Birmingham area. \n \n 🗒️ABOUT THE ROLE: \n As a Field Service Engineer, you'll be responsible for installing new machines, repairing existing machines in customer facilities, and parallelly using the CRM for the process and reporting. You will be in charge of conducting regular inspections to identify wear and tear, potential issues, and safety concerns. You will play a crucial role in providing training to machine operators and maintenance personnel, in reporting progress, addressing concerns, and ensuring great customer satisfaction. \n \n 🎯WHO WE ARE LOOKING FOR: \n\n • 2+ years of hands-on experience in technical service or maintenance roles;\n, • Strong electrical background, with solid expertise in wiring, schematics, diagnostics, and repairs, complemented by good mechanical skills;\n, • Proven ability to work on turning machines and bar feeder applications (IEMCA or similar equipment);\n, • Experience in fault diagnosis, component replacement, and restoration of equipment to full operational efficiency;\n, • Suitable qualifications include: NVQs in Engineering, ONC or HNC;\n, • Excellent problem-solving, organizational and communication skills;\n, • Great attention to customers.\n\n \n 🎁WHAT WE OFFER: \n\n • A dynamic and motivating working environment\n, • Constant technical training\n, • A long-term career opportunity within a solid and growing industrial group\n\n \n Please note: candidates must be authorized to work in the United Kingdom. Sponsorship is not available for this position.

The OpportunityAre you a hands-on fixer who loves keeping complex machinery running at peak performance? Do you live and breathe mechanical engineering, but also know your way around a control panel without breaking a sweat?We are a leading developer and manufacturer of plastic parts. We design and build the systems that keep modern industries running cool, efficient, and reliable. As our new Mechanical Maintenance Engineer , you will be the backbone of our production facilitykeeping our specialized machinery humming, minimizing downtime, and ensuring our operations run like clockwork.If you have a strong mechanical bias paired with practical, basic electrical know-how, we want to hear from you.This is working a 4 day week - Mon - Thursday 6am - 4pm (Fridays off) - Overtime available.What Youll Be DoingNo two days are quite the same, but here is what you can expect to tackle:Preventative & Reactive Maintenance: Conduct planned maintenance (PPM) and rapid-response repairs on a variety of mechanical plant machinery, conveyors, and thermal processing equipment.Troubleshooting: Diagnose mechanical faults (pneumatics, hydraulics, bearings, gearboxes) and carry out effective, long-term repairs.Basic Electrical Tasks: Safely perform minor electrical duties, such as disconnecting/reconnecting motors, replacing faulty sensors, resetting trips, and basic fault-finding.Continuous Improvement: Identify bottlenecks in our processes and suggest mechanical modifications to improve machine reliability and safety.Safety First: Maintain a pristine working environment, ensuring all work complies with health, safety, and environmental regulations.What Were Looking ForWe value practical ability and a proactive attitude above all else. To thrive in this role, you should have:The Foundation: A formal qualification in Mechanical Engineering (City & Guilds, NVQ Level 3, or equivalent apprenticeship).The Multi-Skilled Edge: Proven experience with basic electrical systems. You dont need to be a fully certified industrial electrician, but you must be comfortable and safe working with low-voltage controls, motors, and sensors.The Diagnostic Mindset: Exceptional fault-finding skills across pneumatic, hydraulic, and mechanical drive systems.The Right Attitude: A self-motivated team player who can work independently under pressure and manage their own workload.Bonus Points: Experience in a fast-paced manufacturing, thermal, or process engineering environment.Whats In It For You?We believe in taking care of the people who keep us moving. In return for your hard work, we offer:Competitive Salary with regular reviews.On-the-job Training and genuine opportunities to progress your career and upskill (including support for further electrical certifications).A clean, modern, and supportive working environment with a great team culture.TPBN1_UKTJ

Up to £40,000 Basic + Overtime + Benefits An established engineering organisation is seeking a Field Service Engineer to support the installation, commissioning, maintenance and refurbishment of specialist process equipment across customer sites in the UK and overseas. Key Responsibilities Installation and commissioning of industrial equipment Fault finding, maintenance and repairs Site inspections and technical assessments Completion of service reports and commissioning documentation Operator training and customer support Ensuring compliance with site safety procedures Requirements Mechanical, electrical or multi-skilled engineering background Experience in field service, commissioning, installation or maintenance Strong fault-finding and communication skills Full UK driving licence Willingness to travel throughout the UK and internationally Package Up to £40,000 basic salary Overtime available Home-based role Company vehicle/car allowance Training and development * UK and international travel This role would suit a Field Service Engineer, Service Engineer, Commissioning Engineer or Maintenance Engineer looking to join a well-established engineering business with excellent long-term prospects

DescriptionJoin us, be part of more.We're so much more than an energy company. We're a family of brands revolutionising how we power the planet. We're energisers. One team of 21,000 colleagues that's energising a greener, fairer future by creating an energy system that doesn't rely on fossil fuels, whilst living our powerful commitment to igniting positive change in our communities. Here, you can find more purpose, more passion, and more potential. That's why working here is #MoreThanACareer. We do energy differently - we do it all. We make it, store it, move it, sell it, and mend it.About your team:At PH Jones, our mission is to mend it.Our teams have been at the heart of communities for over 50 years. Partnering with local authorities and associations, we support social housing across the UK - installing, upgrading and repairing heating and electrical systems. But we're not just living off our legacy. We're on a mission to make the UK's social housing sector greener and more energy efficient.Gas Engineer - Service & Repair Engineer | DudleyWhat We Offer £ 33,302.98 base salary - expected earnings up to £45KFull-Time, Permanent ContractAnnual Pay Review & Profit Share SchemeFully Costed Van & Fuel Card (EV options with free home install)Renewables Upskill PotentialLocal ByBox Allocation - less travel, more earning potentialExceptional Benefits Employee Energy Allowance & Discount on HIVE ProductsCompany-Funded Healthcare + 24/7 Online GP ServiceCompany-matched Pension scheme25 Days Holiday + Bank HolidaysFull Sick Pay after successful probationLife Assurance, Income Protection & Accident InsuranceExclusive Retail Discounts & Financial Education SupportYou will be carrying out repairs and maintenance in domestic Social Housing properties, aiming for first-time fixes with the support of our 24/7 networkWhat we need from you Hold a valid UK driving license with no more than 6 pointsHold the Right to Work in the UKHold 2 year's minimum qualified experienceBe ACS qualified, including CCN1 , CENWAT , HTR1 , & CKR1Exhibit knowledge of all procedures and safety measures to PH Jones and British Gas standards whilst offering excellent customer serviceWhy should you apply?We're not a perfect place - but we're a people place. Our priority is supporting all of the different realities our people face. Life is about so much more than work. We get it. That's why we've designed our total rewards to give you the flexibility to choose what you need, when you need it, making sure that you and your family are supported not only financially, but physically and emotionally too. Visit the link below to discover why we're a great place to work and what being part of more means for you.https://www.morethanacareer.energy/phjonesIf you're full of energy, fired up about sustainability, and ready to craft not only a better tomorrow, but a better you, then come and find your purpose in a team where your voice matters, your growth is non-negotiable, and your ambitions are our priority.Help us, help you. We would love for you to share any information about yourself throughout our recruitment process so that we can better understand you and help shape your journey.TPBN1_UKTJ

Building a sustainable tomorrow What if your next step led further than you thought? With a reputation built over 150 years, BAM has the depth, scale and momentum to offer you more than a next step. We offer you a path. One that can take you across sectors, into leadership, or even around the world. We invest in development because we want our people to stay and grow. Wherever you want to go, we’ll help you get there. BAM UK and Ireland are looking for a Senior Project Surveyor to be based in the Birmingham area . Making Possible • Procurement of subcontract packages • Assembling enquiry documentation • Obtaining and analysing Subcontractor quotations and making recommendations • Preparing Subcontractor order documentation • Making payments to Subcontractors • Commercial control of subcontract packages • You will support the main contract valuation preparation • Assist in the monthly and quarterly forecast reporting process • Agreeing final accounts for subcontract packages • Support and contribute to Project risk and opportunity planning • Maintaining a professional approach with clients and professional teams, sub-contractors and suppliers • Seeking opportunities and development in design to improve the overall project delivery • Management of client valuations and variations all the way through to agreeing the final account • Maintaining client and consultant professional relationships • Ensuring compliance with contract requirements Project Delivery : • Working closely and collaboratively with the Project manager, and the rest of the team, to ensure the successful delivery and financial outcome of the project. • Involvement in the development of design and procurement strategies to maximise opportunities and minimise / mitigate risk. • Involvement in identifying key project risks and opportunities, together with risk mitigation strategy’s. • Production of Monthly and Quarterly Cost Reports including project margin projections and cashflow forecasts. • Ensuring compliance with Business requirements and Best Practice procedures. • Production of monthly valuations and agreement with client representatives. • Measurement, valuation and negotiation of Client Variations. • Preparation and negotiation of Project Final Accounts. • Fostering, and maintaining, professional relationships at all times with Client’s, Consultants and our Supply Chain Partners. Your team To be based in the Birmingham area What’s in it for you? Competitive salary A wide range of family friendly policies 8 % matched pension contributions Private healthcare Life assurance 26 days holiday 2 wellbeing days 1 volunteering day Personal and professional development What do you bring to the role? A demonstrable and proven track record working for a main contractor in the construction industry. • Qualified at degree level and/or working towards MRICS, MCIOB, or equivalent professional level • A positive, proactive individual that works collaboratively with colleagues and the client team • An expert negotiator with a keen eye for detail • Excellent communication skills • Confident and experienced in the use of Microsoft Excel & Microsoft Word • Experience of working with BIM and computer aided measurement tools • In depth experience of: - Preparing Valuations, variations and final accounts - Managing Sub-contract accounts & procurement - Working within Company Best Practice Procedures - Understand the implications of health and safety regulations About BAM Building a sustainable tomorrow. That’s our mission and our promise at BAM. It’s how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. We’re on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. The application process BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at any time you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you. "Join us in Making Possible

Lift Service Manager Lift Industry, Engineering Management, Service Manager Birmingham, West Midlands Basic Salary: £55,000 - £65,000 DOE Benefits: Annual Bonus, Company Car or Car Allowance, Company Pension, Private Healthcare, Ongoing Training & Career Development Marmon Lift Recruitment is recruiting an experienced National Lift Service Manager to join a successful and growing independent lift and escalator business. You'll take responsibility for the performance and delivery of the company's national service operation, leading service teams and ensuring consistently high standards across the UK. This is a senior, hands-on leadership role offering genuine influence over how the Service Department operates and develops. Commutable from: Birmingham, Wolverhampton, Walsall, Dudley, Solihull, Coventry, Kidderminster, Telford, Lichfield, Shrewsbury, Redditch, Stafford, and surrounding areas. The National Lift Service Manager Role Lead and develop the national lift service operation Manage and support Service Managers, supervisors and engineering teams Oversee PPM delivery, breakdowns, callouts and lift shutdowns Monitor service KPIs, engineer productivity, response times and performance Ensure technical and operational issues are followed through to resolution Maintain consistent service standards across all regions Build and maintain strong relationships with key clients Review engineer coverage, workloads and operational resources Identify and implement improvements to processes and service delivery Support the continued growth and development of the Service Department Maintain high standards of health, safety and compliance The Ideal Lift Service Manager Candidate Strong experience within lift service and maintenance Previous experience in a Service Manager, Regional Service Manager or National Service Manager position Valid UK driving licence. Good technical understanding of lift servicing, maintenance and breakdowns Strong leadership, communication and people-management skills Commercially aware with a focus on service quality and customer retention Confident managing KPIs, operational performance and client relationships Comfortable managing nationwide service works. Apply to this Lift Service Manager role: For a confidential conversation, call (phone number removed) (Monday - Friday) Ping us your CV: Marmon Lift Recruitment is passionate about understanding what truly matters in your next move before you begin an application or interview process. This commitment ensures we represent your best interests at all times

Electrical Project Engineer Deeside / North West Capital Projects £46-50k + overtime + 10% Pension + Quarterly Bonus + BUPASamuel Frank is recruiting for an Electrical Project Engineer to join a major manufacturing site in the Deeside area. This is an opportunity to work as part of a projects team on electrically biased capital projects from concept through to commissioning on a site that is investing heavily in plant improvements and long-term development.The successful Electrical Project Engineer will manage the full lifecycle of CapEx and plant improvement projects, working closely with operations, maintenance, contractors and suppliers to safely deliver projects on time and within budget.This role could suit a qualified Project Engineer with as little as 2 years relevant experience.Key aspects of the Electrical Project Engineer role includeExcellent communication; strong project, stakeholder and contract management skillsDelivering electrically biased capital projects from concept, design and specification through to installation, commissioning and handoverProducing project plans, progress reports and governance documentation in line with recognised project management principlesDeveloping electrical engineering specifications, risk assessments, management of change documentation and HAZOP documentationManaging equipment suppliers and installation activities on siteSupporting plant improvement, process enhancement and manufacturing development projectsWorking closely with engineering, production, procurement, finance and HSE teams throughout project deliveryDegree or HND/HNC qualified in Electrical EngineeringPrevious experience delivering CapEx projects within heavy industry, manufacturing, process, metals, chemical, utilities or similar environments is preferred or any continuous process line style manufacturing environmentKnowledge of functional safety, CDM regulations, machinery safety, Siemens or Rockwell PLCs, AC/DC drives and instrumentation would be advantageousThe company offers a generous benefits package including a 10% pension contribution, quarterly bonus, BUPA, 28 days holiday plus Bank Holidays, annual pay review, professional membership subscriptions and support towards further qualifications.The site is easily commutable from Deeside, Chester, Wrexham, Ellesmere Port, Liverpool, Runcorn, Widnes, Northwich and Warrington.TPBN1_UKTJ

WANTED !!! Architectural Technician or Architects or Design Engineers OPPORTUNITY TO TRANSFER YOUR CURRENT EXPERIENCE OVER TO A MAIN CONTRACTOR DESIGN COORDINATOR / DESIGN MANAGER ROLE My client is a reputable main contractor who is interested in considering Architectural Technicians & Architects with a view of transferring experience over to a full time Design Coordinator / Manager role, support and training provided. Not only is this a fantastic opportunity to transfer your skills over to a new challenge and a high in demand role, but also it is an excellent employer to join and we strongly believe they stand out as one of the best employers in construction. What makes it great? -Professional & friendly team environment -Excellent relationships and a prompt payer to subcontractors and suppliers. -Big enough to keep you busy, but small enough to know your name, excellent option if you are fed up of being treated like just another number. -Diversity of projects, leisure, commercial, industrial, student accommodation, Care Homes, Hotels, Education and Healthcare. -Excellent opportunity for career progression, going through a period of organic growth. COMPANY: My client is a reputable building main contractor, with a busy and fast growing workload. As a result of securing further new projects, this employer is looking to strengthen their team further with the appointment of a Design Coordinator / Manager to work on a range of exciting projects. Multi-Million Pound Projects live and ready to go. Role & Responsibilities: •Design Manager covering all aspects of the design coordination for the business on various projects. Design Coordinator is similar in scope but on smaller projects or as part of a team on a larger scale project •Arranging and chairing the Design team meetings to lead the process with the consultants and sub contract designers, issuing minutes and ensuring the resulting actions are actioned •Collate and manage the contract specifications, drawing and related documents for the construction process •Carrying drawing reviews issuing Comments then ensuring all comments are added accordingly to the design •Carry out technical reviews of any proposed works to ensure contractual and technical compliance. •Prepare and manage the Design and procurement schedule and issue information release schedules to set design target dates •Offer input and design reviews into the procurement process •Providing design support to Project Management teams. •Review and implement Value engineering opportunities •Coordinate with the M&E managers to ensure coordination of the M&E install and commissioning process. •Utilizing specialist consultants coordinate the information and design to ensure BREEAM and Part L compliance are attained as required. •Coordinate the submission of information to satisfy Building control compliance •Coordinate the submission of information to satisfy all planning conditions are discharged •Lead Design review workshop with the client / tenant to ensure understanding and satisfaction with proposed works •Manage the Design Change Proposals for client sign off •Submitting design information to the client team and recording, tracking and closing out any comments and queries that arise •Issue, track and close out any Requests For Information that arise to enable the design to be completed. Assist in the collation of the O&M Health and safety file REQUIREMENTS: To be considered for this Design Coordinator role you must meet the following criteria: - Knowledge of Building Sector. - Previous employment as a Design Co-ordinator, D&B Coordinator, D&B Manager, Design Manager. Site Engineer, Project management or Design Engineering (civil / structural engineers), Architect or Architectural Technician backgrounds also considered. - High level of communication skills. - Relevant industry qualification (Degree / HND / HNC etc), ideally a civil engineering qualification. REMUNERATION: The successful Assistant / Design Manager will receive: Competitive Basic (Dependant on experience) Car Allowance Pension Bonus To be considered for this vacancy or to find out more information please apply now. Services advertised by Talk Recruitment are that of an employment business and/or agency

Mechanical Project Engineer Deeside / North West Capital Projects £46-50k + overtime + 10% Pension + Quarterly Bonus + BUPASamuel Frank is recruiting for a Mechanical Project Engineer to join a major manufacturing site in the Deeside area. This is an opportunity to work as part of a projects team on mechanically biased aspects of capital projects from concept through to commissioning on a site that is investing heavily in plant improvements and long-term development.The successful Mechanical Project Engineer will manage the full lifecycle of CapEx and plant improvement projects, working closely with operations, maintenance, contractors and suppliers to safely deliver projects on time and within budget.This role could suit a qualified Mechanical Project Engineer with as little as 2 years relevant experience.Key aspects of the Mechanical Project Engineer role includeExcellent communication; strong project, stakeholder and contract management skillsDelivering Mechanically biased capital projects from concept, design and specification through to installation, commissioning and handoverProducing project plans, progress reports and governance documentation in line with recognised project management principlesDeveloping Mechanical engineering specifications, risk assessments, management of change documentation and HAZOP documentationManaging equipment suppliers and installation activities on siteSupporting plant improvement, process enhancement and manufacturing development projectsWorking closely with engineering, production, procurement, finance and HSE teams throughout project deliveryDegree or HND/HNC qualified in Mechanical EngineeringPrevious experience delivering CapEx projects within heavy industry, manufacturing, process, metals, chemical, utilities or similar environments is preferred or any continuous process line style manufacturing environmentKnowledge of functional safety, CDM regulations and machinery safety would be advantageousThe company offers a generous benefits package including a 10% pension contribution, quarterly bonus, BUPA, 28 days holiday plus Bank Holidays, annual pay review, professional membership subscriptions and support towards further qualifications.The site is easily commutable from Deeside, Chester, Wrexham, Ellesmere Port, Liverpool, Runcorn, Widnes, Northwich and Warrington.TPBN1_UKTJ

Refrigeration Engineer - Building Services Maintenance - Up to 55k + Vehicle + Overtime We are recruiting for a Refrigeration Engineer to work in a Service and Maintenance team, this role is based from home working across the Midlands of the UK, Onsite repairs and working with other engineers to help them during their tasks. The organisation has seen steady growth doubling in size over the past few years and has contracts signed up a full order book through to 2029 already. Performing PPM's, repairs, installations and call outs there is an on-call rota 1 in 6 currently across the North Refrigeration Engineer - Package ·Salary basic upto £55000 ote £65000 - £75000 ·40hr week ·Door to Door ·Vehicle ·25 Days holiday & bank holidays ·On call payments ·OT time weekdays and evenings and weekends. ·Private Pension Refrigeration Engineer - Requirements ·Used to performing PPM's and Repairs to various Commercial Refrigeration Systems - Essential ·Mechanical Background & Health and safety knowledge - Essential ·C&G or NVQ level2 or above trained - Desirable ·DBS Checked - Essential ·Valid UK Driving Licence - Essential ·FGas Qualified - Essential This would suit someone who has worked within Building services, M&E, Construction, Industrial Maintenance, Facilities Management, Fire & Security or Hire organisation or within other industries. We will accept applications from those who have worked as an Refrigeration Engineer, Refrigeration Technician, AC Engineer, Static Maintenance Engineer, Gas engineer, Air-conditioning Technician, Air Conditioning Engineer, Refrigeration Supervisor, Lead Refrigeration Technician, Refrig Engineer, HVAC Engineer, HVACR Engineer, Service Engineer, Mechanical Engineer, Multiskilled Engineer. Russell Taylor acts as an employment agency in respect of this position. Please note, due to a high volume of applications, you may not receive a response if unsuccessful. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Our client is a well-established and rapidly growing Midlands-based demolition contractor, delivering complex residential, commercial, and industrial projects across the region. Known for their expertise, commitment to safety, and high-quality service, they offer a dynamic environment for ambitious professionals to develop their careers. This is an excellent hands-on opportunity to gain exposure to live projects from planning to completion, develop your CAD and technical skills, and take the first step in a career within a growing, specialist demolition contractor Junior CAD Technician - Position Remuneration Base salary: £25,000-£30,000 per year, depending on experience Hours: Full-time, Monday to Friday Holidays: Standard company holiday allowance plus bank holidays Training & development: Ongoing training to develop CAD, technical, and industry-specific skills, with exposure to live demolition and construction projects and a clear progression pathway into more senior CAD, technical, or estimating support rolesAll employees are directly employed and supported with a personal development programme and in-house training to further grow skills, experience, and capability within the trade Junior CAD Technician - Position Overview Assist in the preparation and updating of CAD drawings for demolition and enabling works projects Produce site layout plans, demolition sequences, and temporary works drawings under supervision Support the pre-construction and estimating teams with technical drawings for tenders and bids Amend drawings based on site surveys, engineer input, and project requirements Work closely with project managers, estimators, and site teams to ensure drawings are accurate and buildable Maintain organised drawing registers and document control systems Develop technical, CAD, and industry knowledge through ongoing training and exposure to live demolition and construction projectsJunior CAD Technician - Position Requirements Working knowledge of CAD software (AutoCAD or similar), gained through education, training, or early work experience Qualification or current study in CAD, Construction, Engineering, or a related discipline (desirable but not essential) Good attention to detail and willingness to learn Ability to follow instructions and work as part of a team understanding of technical drawings (training will be provided) Good organisational skills and ability to manage simple tasks and deadlines Positive attitude, reliability, and a proactive approach to developmentStreamline Search is a technical recruitment agency based in Chichester, West Sussex operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application

Field Service Engineer – Mobile Fleet TechnicianPeemanent day shiftsAre you ready to go on the road and take your technical skills to a dedicated network of customer sites?If so, then this could be the role for you?if you have experience working on a mobile basis, maybe Agricultural or Material Handling equipment, then we would like to speak with you.We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing:CalloutsPreventative MaintenanceEmergency BreakdownsPre-arranged servicing at rural sitesMOT PreparationEngine work and diagnostic investigationsCorrection of running defects?Chassis and fabrication work?Hydraulics and pneumatics?Improvement of vehicle standards?Electrical and wiring inspections and corrections?You will be travelling within a designated area and have use of a fully equipped van.We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completionThe personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible;Reliable and punctualEnthusiastic, proactive and an innovative thinkerAbiding by health and safety rulesA problem solver with a can-do mindsetIn this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV's, Gritters, Refuse Collection Vehicles, Sweepers, Flat Beds and Cherry Pickers.Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required.A Class 2 Licence would be beneficial.Benefits – you will start with 25 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme.If this role isn't for you but you are looking for a move, then please get in touch.Kautec Recruitment is a fast growing automotive people business that recruits the right way.HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.?TPBN1_UKTJ

Service Operations Manager Competitive Salary Solihull Permanent Full-TimeWe are an employee focused business committed to developing people to ensure that we have the best there is as part of our ever-expanding team.Are you ready to work for one of the largest manufacturers of liquid waste vacuum tankers and jetting equipment in Europe?Then Join our Whale Family! We are seeking a Service Operations Manager to work 5 days a week in our Service Department in Solihull. Some of the duties are - The Service Operation Manager will provide leadership & management to the field service, workshop, remount & service office teams. Deliver exceptional customer service leading to sustainable growth and customer satisfaction. Develop, enhance, and embed service processes and working methods. Oversee and improve team performance including Engineer utilisation and efficiency improvements. Lead the service operation to achieve P&L. Lead and promote a positive safety culture throughout the teamWe are looking for someone who has Senior level service or operational management experience is required for this roleMust come from a HGV, Plant, Tanker or associated background where quick turn around on repairs are imperative to customer satisfaction.Strong interpersonal and team management skillsDemonstratable evidence of creating and embedding KPIs and objectivesSelf-motivation and a positive attitudeStrong communication skills.Ability to work on your own initiative and make decisionsBe an effective team player and actively contribute to our continual improvement cultureComputer Literate including all MS Office ApplicationsStrong organisational, process and project management skillsAbility to work under pressure and prioritise workloadExperience in change management would be beneficial.If this sounds good to you and you feel you have the relevant skills and experience then apply today because not only will you be joining an expanding, enthusiastic and proactive company where no two days are the same, we also have some wonderful benefits on offer.What are the benefits? One off £500 per annum holiday bonus when you take 5 days off in one blockBonus scheme based on the performance of the companyPrivate medical insurance (BUPA)Competitive Company Pension SchemeSecure employment with a longstanding supportive business with opportunity for advancementAnnual pay reviews25 days holiday (plus statutory days) per calendar year 5 days more than the legal requirement£500 Referral SchemeDeath in service for employeesEmployee assistance programme offering free wellbeing (mental and physical) and financial advice and support which offers access for you your partner and children under 18 for a Digital GPEmployee discount scheme including restaurants, holidays, retail vouchers and moreCycle to work schemeFull training, equipment and PPE providedLong service awardsFree parkingPlease note applications will not be reviewed until w/c 31st August 2026TPBN1_UKTJ

Production Lead (Electronics / Electrical Manufacturing)£43,000 - £48,000 + Employee Ownership Benefits + Training + Company Bonus + Early Finish FridayDudleyAre you a senior member of production with a background in an electronics or electrical assembly environment, looking to join a well-established employee-owned business where you'll lead production operations and drive continuous improvement?Do you enjoy managing people, coordinating production schedules and working closely with multiple departments to deliver high-quality products on time?The company have over 40 years of experience providing specialist electronic manufacturing services, supporting customers with low and medium volume electronic assemblies across a wide range of industries.Operating as an Employee Ownership Trust, the company combines technical expertise with a collaborative culture, offering services including design for manufacture, prototyping, component sourcing and testing.This is an excellent opportunity for a senior member of the production function looking to take the next step to oversee daily manufacturing operations, lead a skilled production team and play a key role in maintaining quality, efficiency and on-time delivery.The Role:Manage the day-to-day operations of the electronics production facilityPlan and schedule production to meet customer delivery requirementsLead and develop a production team of 35 operativesMonitor production quality, safety and operational performanceAllocate labour and resources to maximise efficiencyEnsure production processes comply with ISO 9001 Quality Management SystemsThe Person:Background in a senior production roleExperience in electronics, or electrical manufacturingJob reference: BBBH26227cKeywords: Production Manager, Production Supervisor, Manufacturing Manager, Electronics Manufacturing, Electronics Production, ISO 9001, Quality Management, KPI Management, Production Control, Process Improvement, Production Engineer, Dudley, Kingswinford, West MidlandsWe are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skillset.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.TPBN1_UKTJ

Company Description Great Bear (Part of the Culina Group) provides distribution services to FMCG clients. Customer centric service focus is delivered through a site-level empowered culture.At Culina we have a winning culture, we believe that our culture is one of the reasons our company continues to thrive A place where you're valued, challenged, and inspired!Job Description We would like to present you with an exciting opportunity for a Continuous Improvement Engineerto join our team at our Deeside site on a full time permanent basis!As aContinuous Improvement Engineer you willplay a vital role in driving the continuous improvement across all areas of the contract. Identifying processes for improvement covering subjects such as safety, service, cost and quality and any other aspects.Salary: £29,000-£34,000 per annum.Working hours: Monday-Friday, 9am-5pm.Key Duties of a Continuous Improvement Engineer:Drive the continuous improvement (CI) strategy on site.Lead and implement CI initiatives in conjunction with the site teams.Analyse process performance and identify areas of improvement.Track and record benefits made.Develop presentations to illustrate process improvements, recommendations and benefit results.Develop current and future process flows to improve the functional areas. Support the business through the active participation in the implementation of new layouts, processes, technology and equipment.To assist operations with projects as and when required.Qualifications LEAN and SIX SIGMA practitioner desirable.Excellent communication skills.Excellent Presentation skills.Change Management.Ability to work to deadlines.Advanced knowledge in data extraction and analytics using excel and other microsoft software and data bases to analyse large data sets.WMS (warehouse management system) knowledge of system algorithms and how they work.PC Literate in MS Word, Excel, Powerpoint, Access and Outlook, Power Bi.Additional Information As part of our drive to make Great Beara great place to work, we are proud to be an inclusive and diverse organisation where we are committed to employee development and recognising success for hard working performers.Our dedicated learning and development programmes are open to every employee to give you the opportunity to shape your own future within logistics and continue to work in an environment where team culture thrives.Our people are the driving force behind our success, which is why we offer a wide range of benefits which include:Annual Leave 28 days inclusive of the bank holidays.Pension scheme We want colleagues to enjoy a comfortable retirementso we offer agreat contribution of 4% employee and 4% employer.Life Assurance - x2 your annual salary.Wellness Via our Employee Assistance Programmewe offer immediate access to a confidential telephone counselling and legal information service that operates 24 hours a days, 365 days a year.Eye Care Vouchers We can provide you with substantial savings with free eye tests and discounts on prescription glasses.Reward & Recognition We recognise that employees have gone the extra mile via Employee of the Month and Year, special recognition and long service awards.Everyday discounts - Via our benefit platform you will have access to over 50 retailer discounts for everyday savings!If you meet the requirements for the above role and are looking for your next career opportunity, please apply now and become a part of our #WinningTeam!TPBN1_UKTJ

Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive.Where will you be working?At M Group Energy, were enabling the energy essential to support our lives.We provide an end-to-end service, delivering solutions in electricity transmission, distribution, renewable energy, EV, metering and home decarbonisation.This role will be within our Transmission & Renewables team. We design, build and commission substations at voltages up to and including 400kV. Our teams construct and maintain transmission lines and substations, ensuring the efficient and reliable delivery of electricity.What will you be doing?We're looking for a Lead Civil Substation Designer to join our Substations Design team.You must have experience in CDAE for National Grid projects.You'll and play a key role in shaping civil design solutions for substation projects from feasibility to commissioning. You'll collaborate with project teams, designers, and subcontractors to ensure safe and efficient execution, providing constructability advice and overseeing temporary works designs.This is a hybrid role and will include travel to our Birmingham office when required. Lead the civil design and delivery of substation projects from feasibility through to commissioning.Develop civil engineering solutions including foundations, drainage, GIS buildings, and steel structures.Collaborate with project teams, designers, clients, and subcontractors to ensure safe and efficient project delivery.Provide constructability input and technical guidance throughout the project lifecycle.Oversee and review temporary works designs to ensure compliance and safety.Support bid development, tender submissions, and innovation initiatives alongside the Design Manager and Design Lead.Produce and review high-quality engineering reports, calculations, specifications, and drawings.Ensure designs comply with client requirements, BS standards, Eurocodes, and ENA specifications.Act as a Contractor Design Approval Engineer (CDAE), providing design assurance and technical governance.Mentor and support junior engineers, contributing to their professional development.Identify opportunities for continuous improvement and help enhance engineering processes and standards.Work closely with multidisciplinary teams to deliver projects safely, on time, and within budget.What youll bring Previous experience acting as Contractor Design Approval Engineer (CDAE) or Equivalent Role.Professional experience in design and analysis software using STAAD Pro, Tekla Tedds, Autodesk Revit & AutoCAD & Civil 3D, and Tekla Structural DesignerAbility to challenge information presented and be prepared for the versatile nature of Civil Substation Design.Relevant Electricity Transmission & DistributionIndustry Experience.Experience in earthworks modelling and creating 3D models of a site to calculate cut and fill volumes and prepare for constructionWhats in it for you? 25 days annual leave plus bank holidaysPrivate health care and health care cash planDiscretionary bonus schemeCompany car and fuel card with a range of EV and hybrid vehicles to choose fromMatched or contributory pension schemOnline GP service, 24 hours a day, 365 days a yearEmployee assistance programmLife assurancEnhanced maternity, paternity leave and adoption leaveAbout usWe want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. Were one of the Top 100 UK companies actively supporting and recruiting army veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs.Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. Were responsible and go further for our people, clients, communities and the planetWere open and seek new and better ways of exceeding expectationsWere together and as one team; the whole is greater than the sum of the partsWere ambitious and embrace opportunity, to lead essential infrastructure services for lifeWhether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development.Its an exceptional time to be a part of M Group.Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered.For certain roles, successful candidates will be subject to 3rd party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding.#MGroupE #LI-SG1 #LI-Hybrid INDNATTPBN1_UKTJ

SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base.The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners.We are now entering a new and strategically significant phase of growth, characterised by the expansion of our systems to incorporate Land Border Surveillance Systems. Our new Sovereign Territory Surveillance (STS) Systems will play a crucial role in enhancing civil defence security through the deployment of advanced automated security infrastructures. Utilised by nations worldwide, these technologies facilitate the monitoring of sovereign land borders, thereby strengthening border integrity and national security.About the role of Senior Elixir Engineer (Sovereign Territory Surveillance)We're investing in Elixir as the foundation for the next generation of SRT's web technology platform.You'll be joining at a point where you'll have genuine influence over how that platform evolves. We're not looking for someone to simply write features, we want engineers who enjoy making systems better. If you spot a better architecture, a cleaner deployment model, or a more elegant OTP solution, we want you to make the case. You'll have the freedom to experiment, prototype and influence where the platformgoes next.We care far more about solving interesting engineering problems than chasing frameworks or buzzwords. Elixir just happens to be an excellent tool for the kinds of distributed, fault-tolerant systems we're building. You as a Senior Elixir Engineer will work alongside experienced engineers who enjoy discussing architecture, refining systems and occasionally disappearing down an OTP rabbit hole because there has to be a better way. If that sounds familiar, you'll probably feel at home here.We're looking for a Senior Elixir Engineer who enjoys solving difficult technical problems and wants to build software with real-world impact. This isn't another CRUD SaaS platform. The software you build will help coast guards, maritime authorities and governments understand what's happening across some of the world's busiest waterways.You'll be working on distributed, event-driven systems that ingest, process and visualise live data from thousands of assets across the globe. One day you'll be designing resilient OTP services processing streaming telemetry, the next you'll be building highly interactive LiveView applications or helping shape the architecture behind the next generation of our platform.If words like GenServer, PubSub, supervision trees and distributed systems genuinely make you smile, you'll probably enjoy working here. You'll be responsible for building stable, secure and scalable platforms that power SRT's next generation of web technologies. We looking for someone who enjoys understanding systems, not just writing features.Please note - the role of Senior Elixir Engineer is a hybrid role, working both in our Bristol office and WFH.What you'll do in the role of Senior Elixir EngineerYou'll be joining a small team of experienced engineers with significant influence over architecture and technical direction.Our technology stack includes:Elixir / OTPPhoenix & LiveViewPostgreSQL / PostGISEvent-driven architecturesMapLibre and geospatial visualisationReal-time telemetry and data processingContainerised services deployed across cloud and customer-managed infrastructureDepending on the project, you might be:Building scalable APIsProcessing live maritime telemetryDeveloping rich LiveView interfacesWorking with large geospatial datasetsDesigning fault-tolerant distributed servicesHelping shape technical strategy across the platformImproving deployment, observability and developer toolingYou'll ideally have experience with:Elixir and OTPPhoenix and LiveViewDesigning distributed systemsBuilding APIs and backend servicesDistributed relational and/or OLAP databasesContainerised applications and modern deployment practicesCloud and on-premises platformsDesigning maintainable software that evolves over timePerformance profilingExperience with geospatial systems, MapLibre or PostGIS would be highly advantageous, but isn't essential.Benefits PackageExcellent salary and packagePrivate health careCareer Development opportunitiesSRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community.TPBN1_UKTJ

Contracts EngineerThis challenging and exciting opportunity requires an individual with a good technical background and demonstrable experience in taking the responsibility for supporting or delivering piling, foundations or ground / geotechnical engineering sites and projects.Due to sustained growth, a significant forward order workload and a continued commitment to be at the forefront of the industry, our client is now searching for a talented and motivated Contracts Engineer with experience (at any level) within the piling, foundations or ground engineering sectors.Supporting the Contracts Manager, the successful candidate will have the day-to-day responsibility for the safe, timely and profitable delivery of a wide variety of projects and schemes, all running simultaneously at differing stages of completion. This will include managing a site-based team, and resolving any technical, operational and commercial issues as required.The RolePlan, programme and deliver contracts in conjunction with the regional team, internal departments, and subcontractors in accordance with company policyTake responsibility for all assigned projects, including the review of estimates and designs to ensure buildability, and leading projects with the client from receipt of order to completionAttend pre-contract and regular site meetings with the client, clients agents and key sub-contractors (internal and external) to ensure the smooth running of contractsInspect works in progress to ensure conformance to QA procedures and specification, and that schemes are delivered in accordance with the correct designs and specificationsEnsure HSEQ plans and RAMS are prepared for contracts in accordance with company policyAttend regular meetings with the contracts team to provide progress reports on projects, and if required, offer proposals or recommendations to enable successful deliveryProvide technical and operational input into estimates for schemesAssist in the preparation of proposals during the pre-tender phase as requiredEnsure the commercial team is provided with all relevant information, documentation and instructions to support contract variations and final accounts submissions for paymentCarry out toolbox talks as requiredEnsure all projects are planned and executed in accordance with company policy, whilst maintaining and improving the professional and progressive image of the company wherever possibleAnalyse and interpret detailed client requirements, drawings and specificationsWork under deadline pressures in an efficient, composed and calm mannerAssist the business as a whole to meet their financial targetsHelp to manage suppliers and sub-contractors to improve safety, performance and profitThe PersonPossessing experience in a contracts, projects or site role from any area of the piling, foundations, retaining structures or ground engineering sectorsTo have assisted in the development and delivery of projects with a diplomatic and pragmatic approach, but also with a hands-on attitude to clients, sub-contractors and teamsTo possess first-hand exposure to various contracts, and demonstrate a lead from the front approachHold experience of a variety of projects, including multi discipline techniquesPossess an understanding of all stages of the contracting process, coupled with the ability to manage and develop yourself both technically and commerciallyAble to identify the requirements of assigned projects to efficiently and effectively produce the most appropriate delivery plan or programmeCorrespond and negotiate with clients, suppliers, contractors, site teams and colleaguesEfficiently manage situations when workload presents conflicting demands on time and availability, demonstrating an ability to effectively prioritise and scheduleMonitor, progress and implement controls to ensure tasks are achieved to time, cost and qualityDevelop and select effective solutions to project requirementsCommunicate facts to stakeholders (internally or externally) in an effective mannerDeliver efficient and effective customer service at all timesOur ClientOur client is a market leading piling, foundations, retaining structures and ground engineering contractor. Their service offering includes restricted access and open sites and covers all disciplines and techniques for a wide variety of clients and project applications. They not only complete projects successfully and to the highest of standards at all times but also adds value to their clients by giving them total support from the beginning to the end of each and every contract.An attractive basic salary (commensurate with experience) plus extensive benefits package is on offer to the successful Contracts Engineer candidate, along with longevity and security of work and forward career progression given that our client possesses a significant contract pipeline for the long-term future and is firmly committed to continued growth over the next 5-10 years.TPBN1_UKTJ

Senior Multi-Skilled Maintenance Engineer (Relocate to Wiltshire) Wiltshire £58,000 Multiple permanent positions available A seriously automated site needs seriously capable engineers. This isn’t a role where you’ll spend your shift changing lightbulbs and waiting for something to happen. We’re helping an established UK manufacturer strengthen the Engineering team at a large, highly automated production facility. The site operates a complex network of high-speed machinery, robotics, vision systems, conveyors and specialist packing equipment. It needs engineers who enjoy understanding how everything works together. When a fault stops production, you’ll be trusted to work out what has happened, fix it properly and help prevent it from happening again. What will you be working on? The site uses interconnected machinery across its production and packing processes, including: PLC-controlled production and packing lines Automated loading and material-handling systems High-speed conveyors, buffers and sortation equipment Camera and vision-based inspection technology Automated inspection and sorting systems Robotic pick-and-place and case-packing equipment Tray, case and packaging-handling systems Automated palletising, wrapping and labelling equipment Motors, pumps, gearboxes, drives, sensors and control systems Pneumatic and hydraulic equipment It’s fast, technical and highly interconnected. One small fault can affect the entire process, so this role needs someone who can look beyond the obvious reset button. What you’ll be doing You’ll take responsibility for engineering performance across your shift, including: Leading electrical and mechanical fault-finding during breakdowns Diagnosing faults across PLCs, automation, robotics and process-control equipment Completing planned and preventative maintenance Tackling recurring faults through proper root-cause investigation Maintaining conveyors, motors, pumps, drives, pneumatics and hydraulics Supporting equipment modifications, installations and improvement projects Using the site CMMS to manage work orders, maintenance schedules and asset history Identifying opportunities to reduce downtime and improve reliability Working closely with Production to keep the site running safely and efficiently Supporting strong engineering standards across the wider team This is a senior hands-on position. You won’t be watching from the sidelines, but you will be expected to bring the judgement and technical confidence to take ownership when the difficult faults land. Who are we looking for? You’ll need to be apprentice-trained, time-served or qualified to NVQ Level 3, City & Guilds or an equivalent standard in Electrical, Mechanical or Multi-Skilled Engineering. We’re looking for: Strong electrical and mechanical fault-finding ability Experience maintaining automated production or packing equipment Confidence working with PLC-controlled machinery Experience with sensors, drives, motors, conveyors and control systems Knowledge of pneumatic and hydraulic systems A track record of reducing downtime or improving machinery reliability Experience using a CMMS for maintenance and asset management The ability to stay methodical when production pressure is building Experience with robotics, automated inspection equipment, vision technology or high-speed packing machinery would be particularly useful. A current IET Wiring Regulations qualification and Food Safety Level 2 would be advantageous. Not from food manufacturing? That doesn’t automatically rule you out. Food, FMCG or high-speed packaging experience would be valuable, but the real priority is your ability to fault-find and maintain complex automated machinery. We’re also interested in engineers from: Automotive manufacturing Pharmaceutical or medical production Plastics and packaging Print and paper Automated warehousing and distribution Materials handling Other high-volume manufacturing environments If you understand automation, can fault-find across electrical and mechanical systems and don’t need someone standing over you during a breakdown, we want to hear from you. What’s on offer? Permanent position Company pension On-site parking A highly automated site with genuine engineering variety Ongoing investment in machinery and engineering capability Multiple opportunities available If you’re looking for a site where your engineering ability will genuinely matter - and where no two breakdowns are likely to be the same - apply today or contact us for a confidential conversation

At EES Contracts Ltd, we deliver industrial electrical installations and engineering solutions across a range of sectors including automotive, manufacturing, food and beverage, logistics, aviation, and heavy industry. With over 50 years of experience, we specialise in power distribution, automation, process environments, shutdowns, relocations, and turnkey electrical projects.Role OverviewWe are seeking an experienced Commissioning Engineer to support the delivery, testing, commissioning, and handover of industrial electrical systems on a variety of large-scale projects. The successful candidate will play a key role in ensuring systems are installed, tested, and operating safely and efficiently in line with client specifications and industry standards.The role involves working closely with project teams, clients, subcontractors, and site personnel to deliver high-quality commissioning activities within project deadlines.Key ResponsibilitiesCarry out commissioning and functional testing of industrial electrical systems and equipment.Read and interpret electrical drawings, schematics, cable schedules, and technical documentation.Support installation teams during project delivery and provide technical assistance where required.Perform pre-commissioning inspections and identify defects or non-conformances.Test and verify LV power systems, control panels, MCCs, instrumentation, and automation systems.Assist with fault finding, diagnostics, and system troubleshooting.Produce commissioning reports, test sheets, and handover documentation.Ensure all commissioning activities comply with current electrical regulations, site procedures, and health & safety standards.Liaise directly with clients, suppliers, and other contractors on site.Attend site meetings and contribute to project planning and progress updates.Support shutdowns, upgrades, relocations, and live industrial environments where required.Ensure work is completed to programme and within project deadlines.Essential RequirementsProven experience as a Commissioning Engineer within industrial electrical environments.Strong understanding of industrial electrical systems, controls, and automation.Ability to interpret electrical schematics and technical drawings.Experience commissioning LV systems, control systems, and process equipment.Strong fault-finding and diagnostic skills.ECS/CSCS card.Excellent communication and organisational skills.Ability to work independently and as part of a wider project team.Experience within automotive, manufacturing, food production, or process industries.Knowledge of PLC systems and industrial automation.Applicants should submit their CV along with relevant qualifications and project experience for consideration.TPBN1_UKTJ

Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive.Where will you be working?At M Group Energy, were enabling the energy essential to support our lives.We provide an end-to-end service, delivering solutions in electricity transmission, distribution, renewable energy, EV, metering and home decarbonisation.This role will be within our Substation & Renewable Connections team . We design, build and commission substations at voltages up to and including 400kV. Our teams construct and maintain transmission lines and substations, ensuring the efficient and reliable delivery of electricity.What will you be doing?M Group Energy is recruiting for an Engineering Manager to work across the business on multiple design and build projects withint our substations and renewables area. Our current projects are currently based in South West, South Wales and South East.An Engineering Manageroversees and manages design projects from initiation to completion, ensuring they are delivered on time, within budget, and to the required quality standards.This role requires strong organisational, communication, and leadership skills, as well as a solid understanding of the design process.This is a Hybrid role where you will be required to travel to our offices in Newport, Birmingham & Nottingham as and when required . You must be available to travel on work related business with occasional overnight stays.Developing and implementing project plans, defining timelines, allocating resources, and monitoring progress.Collaborating with clients, designers, and other stakeholders to understand requirements, manage expectations, and ensure satisfaction.Guiding and motivating design teams, providing feedback, and fostering a collaborative environment.Identifying and mitigating potential risks and issues that may impact the project.Managing project budgets, tracking expenses, and ensuring resources are used effectively.Ensuring the final design deliverables meet the required standards and quality.Maintaining clear and consistent communication with all stakeholders, providing regular updates on project status.Maintaining comprehensive project documentation for reference and reporting.Addressing and resolving design issues that arise during the project lifecycle.Continuously reviewing and improving the design process to enhance efficiency and effectiveness.What you'll bring: Application of the principles of CDM 2015 and the role of Principal Designer.Ideally previous experience acting as Contractor Design Approval Engineer (CDAE).Bachelor's degree in a relevant field (Engineering, Project Management, Business).Proven experience in project management, preferably within a design related field.Proficiency in project management software and design tools.Knowledge of design principles and processes.Ability to lead and motivate a team of creative professionals.Ability to manage multiple projects simultaneously.Experience in managing budgets and resources.Strong understanding of risk management.Available to travel on work related business with occasional overnight stays.Must hold a full UK driving licenceWhats in it for you? 25 days annual leave plus bank holidaysCompany car/car allowance and fuel card for business usePrivate health care and health care cash plan for youDiscretionary bonus schemeMatched or contributory pension schemeLife AssuranceEnhanced maternity, paternity leave and adoption leave & more..About usWe want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We are one of the Top 100 UK companies actively supporting and recruiting veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs.Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours.Were responsible and go further for our people, clients, communities and the planetWere open and seek new and better ways of exceeding expectationsWere together and as one team; the whole is greater than the sum of the partsWere ambitious and embrace opportunity, to lead essential infrastructure services for lifeWhether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development.Its an exceptional time to be a part of M Group.Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered.For certain roles, successful candidates will be subject to 3rd party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding.#MGroupE #LI-SG1 #LI-Hybrid INDREGTPBN1_UKTJ

Electrical Supervisor – Midlands Region Are you an experienced leader with a strong technical background in electrical fixed wire testing? Do you thrive on motivating teams, driving performance, and ensuring the highest standards of safety and service? If so, we’d love to hear from you.As a Fixed Wire Supervisor with phs Compliance, you will:\n\n • Manage and monitor engineer activity, ensuring productivity targets and SLA compliance.\n, • Process PDA timesheets, verify site times, and oversee correct PDA usage.\n, • Monitor customer portal usage and address discrepancies in overtime and travel time submissions.\n, • Promote safe driving standards, review vehicle usage, and investigate poor driving practices.\n, • Manage employee absence, holidays, and sickness (short and long term).\n, • Conduct onsite audits (H&S, vehicle, technical) and provide training/support where needed.\n, • Oversee onboarding of new starters and probation reviews, ensuring leaver processes are followed.\n, • Champion diversity and inclusion across the workforce.\nWe’re looking for someone who brings:\n\n, • Excellent technical knowledge of electrical testing and compliance services.\n, • Strong leadership skills to inspire and motivate teams.\n, • Logical decision-making ability and sound judgment.\n, • A solid understanding of Health & Safety in the workplace.\n, • Confident communication skills with clients and colleagues at all levels.\nIn return for your commitment, you’ll receive:\n\n, • A Competitive salary with potential overtime (evenings/weekends).\n, • 23 days holiday (Plus bank holidays)\n, • Pension scheme.\n, • Fully maintained company vehicle (available for private use).\n, • Laptop, and company phone.\n, • All parking fees and work-related expenses covered.\n, • Technical support from our internal team.\n, • Access to PHS Perks (discounts, wellbeing helpline, online GP, and more).\n, • Ongoing career development opportunities.\nQualifications & Experience required for Fixed Wire Service Supervisor :\n\n, • NVQ Level 3 or City & Guilds 2360/2330 Part 1 & 2 (or equivalent Level 3 SQV).\n, • City & Guilds 18th Edition qualification.\n, • AM2\n, • City & Guilds 2391/2394 & 2395.\n, • IOSH Managing Safely (or willingness to achieve).\n, • Relevant industry qualifications.\n, • Level 3 management qualification (or willingness to work towards).\n, • Valid UK manual driving licence with 6 points or less\n, • Minimum 2 years’ experience managing a field team.\n\n\n, • Flexibility to work 40 hours per week, including evenings.\n, • Experience in electrical testing environments.\nAbout PHS GroupFounded in 1963, PHS Group is the UK’s leading provider of hygiene and compliance services, operating across the UK, Spain, and Ireland. With over 120,000 customers and 300,000 locations, we deliver trusted services across multiple specialist businesses including Washrooms, Healthcare, Floorcare, Greenleaf, Besafe, Wastekit, and Compliance.PHS Compliance supports over 2,000 UK and Irish businesses with electrical testing, installation, and asset management. With over 400 engineers nationwide, we are one of the few UK companies accredited to UKAS 17020 inspection body standards.At PHS, we value Ownership, Teamwork, Innovation, Integrity, Performance, and Expertise. We pride ourselves on diversity and inclusion, ensuring every employee can bring their true selves to work.Join UsIf you’re ready to take the next step in your career and lead a team that delivers excellence in electrical compliance, apply today and become part of a company that puts people at the heart of its products.

Quality Engineer Based in Birmingham Full time permanent £47000 salaryWe are seeking an experienced Quality Engineer to join a leading Birmingham based manufacturer.The company work across a number of sectors including automotive, defence and aerospace to design and manufacture components at high levels.A quality engineer (QE) ensures products and processes meet stringent safety, regulatory, and design standards . They design testing procedures, perform root-cause analysis on defects, and implement continuous improvement frameworks like Six Sigma to prevent issues from recurring.Quality Control & Testing: Designing and developing test cases, automation scripts, and physical inspections to validate product durability, reliability, and functionality.Defect Tracking: Investigating exactly why a product or process failed and utilising statistical analysis to identify trends and patterns .System Auditing: Auditing manufacturing or software development systems to ensure they comply with industry regulations and standards, such as ISO 9001.Cross-Functional Collaboration: Acting as a link between design, procurement, and production teams to "build in" quality from early development through to final delivery.Documentation & Reporting: Maintaining traceability, defect logs, and quality metrics required for certifications and legal complianceBenefits of Quality Engineer:- £47000 basic + DOE - Monday to Friday - 39 hours per week - 0700 starts - 28 days annual leave - Free parking - Pension - Health care package and employee discountExperience Required for Quality Engineer:- Have 2 years or more experience within a similar role - Have relevant qualification - apprenticeship, relevant degree, NVQ etc - Have knowledge of all inspection methods - hand tools, robotic measuring - Assurance and reporting experience - Knowledge of industry standards - ISO 9001 / AS9102 / IATF6949 - Continuous improvement and 8D management - Maintaining accurate reports and documents - Liaising with internal management and other departments - Liaising with customers and 3rd party suppliersIf you are exciting by this opportunity of Quality Engineer, and Birmingham is a commutable location, apply today and a member of the team will contact you with 48 hours.TPBN1_UKTJ

The Senior Design Engineer role is responsible for supporting business strategy, delivering profitable, organic growth and continuous improvement, by interacting with customers, interpreting technical specifications, and converting these into a world class product or service. The Senior Design Engineer is responsible for producing highly accurate, technical documentation while ensuring The Senior Design Engineer role is part of the Product Engineering Team and involves working collaboratively with Project Management, Operations/Production, Quality and Supply Chain departments. Key Responsibilities Duties will include but no be limited to: • Design and develop flow control products (valves, actuators, manifolds etc) for Defence applications, considering factors like pressure, temperature, environmental conditions, and fluid compatibility etc., • Conduct detailed engineering analyses (calculations, test plans, qualification plans, etc) for performance, reliability, and safety in extreme conditions., • Review external analysis and validation data (FEA, CFD, physical test results, etc)., • Ensure compliance with industry, military, and government standards for technical, quality and safety requirements, as well as internal processes and procedures., • Involvement with the end-to-end Engineering process (from bid winning/business development through to product manufacture, assembly, and test)., • Material selection of products for specific parameters., • Oversee testing for compliance in line with specified requirements., • Create prototypes for testing, including functional and environmental validation., • Collaborate with cross-functional teams for seamless integration into Defence systems., • Analyse and troubleshoot valve failures, implementing corrective actions and design improvements., • Generate engineering documentation, such as calculations, plans, technical instructions., • Create both concept and production GA and component drawings accordance with BS8888, applying sound engineering knowledge, DfM, appropriate tolerances and GD&T where necessary., • Stay updated with advancements in valve technology and recommend innovations for continuous improvements., • Identify and mitigate potential risks associated with product design, production, and deployment., • Provide technical training, guidance and support to less experienced Design Engineers, ensuring the highest of standards are met., • Deputise for the Design Engineering Lead where appropriate. Skills & Experience • Engineering Degree in a relevant discipline (Mechanical, Aerospace, Naval/Marine etc)., • 7+ years’ experience in a relevant field, preferably with valve/hydraulic systems knowledge., • Mechanical design using 3D software (preferably SolidWorks)., • Drawings (GA drawings, installation/maintenance drawings, component drawings)., • Experience in fluid control systems and products is desirable (valves, manifolds, actuators, hydraulics etc), • Experience in creating calculations and design/product validation., • Shop floor (assembly and test)/field services support., • Customer interaction (specification interpretation, design reviews, etc), • Experience with engineering/quality tools such as APQP, FMEAs, 8Ds, 5Ys, etc, • Membership with an Engineering Institution is preferable (IMechE, IET, IMarEST, etc), • Working experience of direct or indirect management of a team of technical staff., • Ability to conduct 1-2-1 Performance Reviews. Personal Characteristics • Can-Do, Will-Do attitude with the ability to problem solve and determination to continually improve the business., • Excellent attention to detail with a high accuracy level., • Excellent interpersonal (written and oral) skills., • Able to keep the customers’ interests front of mind, creating strong and in-depth relationships., • Acts with integrity – deliver on promises, inspires trust, builds credibility, and always follows responsible business practices, always prepared to do the right thing., • Collaborative and a good team worker., • Determined to overcome unexpected obstacles to get to the right solution., • Strong drive for results, confident, motivated, and tenacious – create momentum and pace to drive results., • Working well under pressure and engaging at all levels of the organisation both internally and externally.

Job Title: Lead Plant Quality Engineer Location: Solihull, B90 Company: Autoscan Pay Rate: £38-£40 Ltd Duration: 3-Months FTC About Us Autoscan UK Limited is a leading provider of quality assurance and inspection services to the automotive industry. With years of experience and a commitment to excellence, we partner with top automotive manufacturers to ensure the highest standards of quality and safety. The Role We are seeking a leader to head our Plant Quality Engineering team, providing the technical guidance, coaching, and performance development needed to establish a proactive quality culture across manufacturing operations. In this role, you will ensure processes consistently achieve safety, quality, and customer requirements by supporting production teams through daily reviews, managing escalations, and presenting performance updates to senior management to contribute to strategic planning. You will ensure quality is built into manufacturing from launch by supporting New Product Introduction (NPI) activities, collaborating with Supplier Quality to resolve external bottlenecks, and coordinating responses to customer quality and warranty concerns. Furthermore, you will maintain compliance with ISO 9001 while implementing automotive quality standards and best practices across the facility. Focusing on continuous improvement and structured problem-solving, you will lead investigations into internal quality concerns using methodologies such as 8D, A3, 5 Why, Ishikawa, and DMAIC, while managing the entire CAPA process from containment to validation. You will develop and maintain crucial quality documentation, including Process Control Plans, PFMEAs, and inspection standards, while monitoring manufacturing performance through KPIs and statistical analysis to act on trends. Your technical background will be essential as you lead process validation activitiesincluding capability studies (Cp/Cpk), MSA, and process auditsalongside Layered Process Audits (LPA) and internal manufacturing reviews. Ultimately, your objective will be to drive initiatives that reduce defects, elevate first-time-through quality, and lower the cost of poor quality. Please Note: All candidates must possess valid right to work in the UK without restrictions and must undergo a standard criminal record check (DBS). All applications will be treated in the strictest of confidence. We are NOT able to support Visa Sponsorship for this role. We do NOT accept speculative CVs from Recruitment Agencies. Skills & Experience Essential Degree in Mechanical Engineering, Manufacturing Engineering, Quality Engineering, or a related discipline. Significant experience within manufacturing quality engineering in automotive, motorcycle, aerospace, or high-value engineering industries. Previous experience leading or mentoring quality engineering teams. Strong understanding of manufacturing processes including machining, assembly, fabrication, and paint. Proven experience with structured problem-solving techniques including: 8D, 5 Why, Ishikawa, FMEA, Control Plan, SPC, MSA and PPAP principles. Experience conducting process and product audits Excellent analytical and data interpretation skills Experience supporting New Product Introduction (NPI) Strong communication and stakeholder management abilities Ability to influence cross-functional teams and drive quality improvements Desirable Lead Auditor qualification Six Sigma Green Belt or Black Belt Knowledge of IATF 16949 core quality tools Experience within premium automotive or motorcycle manufacturing Familiarity with digital quality systems and Manufacturing Execution Systems (MES) ?? Stay Connected: Follow us on Linked In to stay updated on the latest news and job openings at Autoscan. Autoscan is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. ?? For More Information: Visit our careers site or contact our Recruitment team directly. Join Autoscan and be a part of a team dedicated to driving excellence in the automotive industry! We are a Forces friendly employer, and welcome applications from the Armed Forces community. Benefits £38-£40 Ltd hourly pay rate State of the art production facility Family Friendly working hours Free and secure on-site car parking Collaborative team based environment TPBN1_UKTJ

Job Description Mechanical Maintenance Technician (Nights) Are you ready to apply Make sure you understand all the responsibilities and tasks associated with this role before proceeding. Wellingborough £40,000 – £45,000 (Experience Dependent) 3 night on, 2 off, 3 nights on, 4 off (12-hour shifts, 7–7) We are recruiting for a leading global manufacturer operating within a fast-paced production environment, supplying high-quality packaging solutions to major brands. The site offers a modern, well-invested facility with a strong focus on continuous improvement, operational excellence, and employee development. Responsibilities - Mechanical Maintenance Technician • Carry out fault diagnosis and repairs on mechanical and hydraulic systems across production equipment Perform planned preventative maintenance (PPM) to maximise machinery reliability and efficiency Troubleshoot breakdowns and implement effective, long-term solutions to minimise downtime Support continuous improvement initiatives to optimise equipment performance (OEE) Maintain and service site equipment, utilities, and general mechanical systems Work collaboratively with production teams to ensure minimal disruption to operations Complete maintenance records and ensure all work is carried out in line with health & safety standards Assist with basic electrical fault finding and repair where required Experience / Qualifications - Mechanical Maintenance Technician • Minimum Level 2 or Level 3 qualification in Engineering (Mechanical or Electrical) Strong mechanical maintenance background within a manufacturing or production environment Experience working with hydraulics, pneumatics, and mechanical systems Basic electrical fault-finding ability (desirable, not essential) Proven ability to diagnose faults and carry out efficient repairs Comfortable working in a fast-paced, shift-based environment A proactive, team-oriented mindset with strong problem-solving skills Benefits - Mechanical Maintenance Technician • Competitive salary based on experience Structured shift pattern allowing for regular extended time off Opportunity to work within a modern, well-invested manufacturing facility Ongoing training and development opportunities Supportive and collaborative team environment Pension scheme and other standard company benefits For more information on this role, please contact Andy Haddon on , or send a copy of your CV to For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Mechanical Engineer, Maintenance Engineer, Shift Engineer, Mechanical Technician, Plant Fitter, or Multi-Skilled Engineer (Mechanical Bias). Omega is acting as an Employment Agency in relation to this vacancy. xrnqpay Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process.

Injection Moulding Setter - Birmingham, UK Location: B40 1AB Pay: £37,294.40 - £45,162.23 per annum (experiance dependant) Hours: 40 hour week, 3 shift rotation Mornings - 06:00-14:00 Afternoons - 14:00-22:00 Nights - 22:00-06:00 Join a leading manufacturing organisation specialising in high-quality plastic components for diverse industries. Renowned for innovation, commitment to excellence, and a supportive work environment, our company offers excellent career development opportunities. We pride ourselves on fostering a culture of continuous improvement and safety, making us an attractive employer for skilled professionals seeking stability and growth in the UK manufacturing sector. Job Responsibilities Set up and start injection moulding presses in accordance with production requirements. Operate start and stop procedures for injection moulding presses efficiently. Prepare tools and equipment ahead of scheduled tool changes to minimise downtime. Sling and lift tools using cranes safely and in compliance with health and safety regulations. Present the first off part to the Quality Department for approval prior to full production. Adhere strictly to company quality standards and work procedures to ensure product integrity. Set up robot heads and load programmes to facilitate automated processes. Proactively communicate faults or issues, collaborating with tool-room and maintenance teams to support swift resolution, following company procedures. Accurately complete job packs before and during tool changes, recording deviations as necessary. Support troubleshooting efforts and contribute to process improvements as directed by the Process Engineer. Conduct safety checks, maintain housekeeping standards, and perform routine maintenance checks around machine areas. Participate in SMED activities to optimise changeover times and improve efficiency. Work towards and report on KPI targets related to tool change times and Overall Equipment Effectiveness (OEE). Perform colour changes efficiently to meet production schedules. Support trialling of new robotics or moulding methods to enhance manufacturing processes. Assist with any additional projects or tasks assigned by management to support operational excellence. Required Skills & Qualifications Proven experience in injection moulding setting and operation is essential. Experience with robotics in manufacturing environments is advantageous. Hold or be actively pursuing an NVQ Level 2 in Injection Moulding and Tool Setting; NVQ Level 3 is desirable. Possess an Overhead Crane Operation licence and demonstrate competence in the safe use of slings and lifting equipment. Strong understanding of quality standards and process control in a manufacturing setting. Excellent communication skills and the ability to work collaboratively within a team. Good organisational skills with attention to detail, especially in documentation and reporting. Proactive approach to troubleshooting and process improvement initiatives. Call to Action If you are a dedicated injection moulding professional looking to advance your career within a reputable manufacturing environment, we want to hear from you! Apply now to join a forward-thinking company committed to excellence and innovation. Take the next step in your career today! If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.

JLL empowers you to shape a brighter way . Below, you will find a complete breakdown of everything required of potential candidates, as well as how to apply Good luck. Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Join JLL's dynamic team serving one of the world's largest banking and financial services organisations with a network spanning more than 50 countries and territories. W e're seeking talented professionals who thrive in fast-paced environments and are eager to drive meaningful change. This is an outstanding opportunity to work alongside industry experts that help shape the future of workplace strategy for a globally recognised institution. Whether you want a career that could take you to the top or an exciting new direction, we offer opportunities, support and rewards that will help you stand out, fulfil your potential, and ultimately make your mark on something truly exciting. A Mobile Multi Skilled Maintenance Engineer to carry out PPM and Reactive Activities in a variety of commercial premises, candidates will ideally be located in the required area. Applicants will have Commercial Experience. The applicant would be expected to assist with various reactive and PPM tasks. Some installation work will be expected although the core part of the role is maintenance. The role is predominantly Skillset AC/HAVC bias of strong multi-skilled background with experience of Building Services. This is a hands-on role and would suit an individual that can work using their own initiative and have a proactive approach to undertake all tasks required. A conscientious and reliable team player and someone that has excellent interpersonal and communication skills due to this being a client facing role. The ability to produce quotes for additional works by obtaining materials costs and writing up a description of the works required. Main Duties and Responsibilities: To carry out reactive maintenance repairs across various contracts. To assess and order parts and equipment necessary for individual tasks. To work to recognised industry standards at all times. To participate in flexible working hours and out-of-hours emergency cover as required by the contract. To undertake training as required to perform the duties of the role, including health and safety courses and further trade development, to maintain current knowledge and professional qualifications (Continued Professional Development). To assist other trades as/when required. To update/close completed Reactive & PPM tasks on our CAFM System Ensure engineering standards are maintained in order to maximise efficient operation and reliability of plant. To ensure company QA and site procedures are adhered to in all aspects. To ensure that both Client and Integral's Health and Safety procedures are followed at all times. To inspect the condition of services and proactively deal with call outs/repairs as required and/or requested by management. To attend emergencies, inside and outside of normal working hours. Keep and maintain all company issued tools in a safe and working condition. To assess and order parts and equipment necessary for individual tasks. To work to recognised industry standards at all times. To undertake training as required to perform the duties of the role, including health and safety courses and further trade development, to maintain current knowledge and professional qualifications (Continued Professional Development). To undertake any other duties as directed by Managers within the remit of the role. Provide detailed and accurate reports for any remedial works required whilst attending site Produce technical and situational reports as required Updating of on-site log books for compliance purposes Electrical testing and completion of any certificates or documentation for works completed Complete on site Method Statements and Risk Assessments as necessary This job description sets out the main duties of the post at the date it was completed. Such duties may vary from time to time without changing the general character of the post or the level of responsibility entailed. AC/HVAC Specific To carry out works on AC equipment, such as compressor and fan replacement, clear line blockages and replace condense pumps, fault find PCB's and electrical wiring replacing as necessary, repair pipework and complete pressure leak tests, install new splits To carry out PPM tasks, such as annual servicing, filter and coil cleans, FGas leak checks, tap temperature testing and flushing, fan coil servicing, functional testing and visual inspection of equipment Experience and Qualifications: Extensive experience within the trade of service, installation and maintenance of refrigeration and air conditioning systems, VRV, VRF & split systems Knowledge of Fault finding on AC control systems NVQ 3 Certificate in Servicing and Maintaining Air-Conditioning and Heat Pump Systems NVQ 3 Certificate in Installing and Commissioning Air-Conditioning and Heat Pump Systems NVQ 3 Diploma in Servicing and Maintaining Refrigeration Systems NVQ 3 Certificate in Installing and Commissioning Refrigeration Systems C&G 2079 F GAS and ODS Regulations : Category 4 Full UK Driving License Knowledge of building fabric and experience in carrying out basic fabric reactive repairs when required Extensive Knowledge of Health & Safety Regulations. Ability to act on own initiative. Smart appearance, presentable Must be available for call outs Good written and verbal communication skills Able to work from a smartphone and PDA Comfortable working within a team environment. Able to contribute to teams success whilst willingly following instructions Self-motivated and able to work unsupervised Adaptable and flexible approach to work requirements, willing to accept change. The candidate will be required to adopt a flexible approach to working hours to suit the needs of the sector. This will require work at weekends and in the evenings. IPAF 3a&3b Pasma Location: On-site -Birmingham, GBR If this job description resonates with you, we encourage you to apply even if you don't meet all of the requirements. We're interested in getting to know you and what you bring to the table! At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our Candidate Privacy Statement . For additional details please see our career site pages for each country. Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. xrnqpay If you need a reasonable accommodation because of a disability for any part of the employment process • including the online application and/or overall selection process, • you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL.

Field Service Technician - Scroll down to find an indepth overview of this job, and what is expected of candidates Make an application by clicking on the Apply button. Monday to Friday (no weekends) - You are paid door to door - no commute We are looking for a talented field-based Engineer to perform a variety of routine servicing, inspections and subsequent repairs to a variety of specialised vehicles supplied by the client to their customers. This will involve representing the client, travelling to their customer's sites and services centres. This could involve working at airports, sea ports , main dealers, manufacturing sites or military installations. We are looking for a self motivated and independent Mechanical Engineer who can travel to our clients various workshops in a designated area providing: Callouts Preventative Maintenance Emergency Breakdowns Pre-arranged servicing at rural sites Engine work and diagnostic investigations Correction of running defects Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections You will be travelling within a designated area and have use of a fully equipped van. You could be working on cargo and ground support equipment, industrial type tractors and tugs/ shunters. xrnqpay We require an excellent understanding of Plant and Vehicle technologies, and be capable of following the repair process from fault analysis to completion The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; Reliable and punctual Enthusiastic, proactive and an innovative thinker Abiding by health and safety rules A problem solver with a can-do mindset Cargo Handling, Roll on Roll off, RoRo, Tractor, Rescue Vehicle, Fire Engine, Ground Support Equipment, Ground Service Equipment.

Job Overview We are looking for a Service / Mobile Engineer Coordinator to join our Maintenance team, who provide first-line maintenance support to our fleet and customers, customer satisfaction and communications skills will be vital in ensuring our first-class service is upheld. The successful candidate will play a pivotal role in ND Browns success and growth, coordinating our mobile HGV mechanics across the UK, scheduling their work, ensuring documents are provided to the customer in a timely manner, maximising the productivity of our team. You will also become a reference point for colleagues and customers alike in the instance of vehicle failure, service or MOT bookings, providing first-class service to our customers. This role will be suited to an individual with automotive maintenance and/or customer service who can deliver exceptional customer service, within a fast-paced ever changing environment, have good organisational skills and the drive to work hard within an incredibly varied role. This is a fantastic opportunity for an individual to join our fast expanding team. Responsibilities and Duties Book, schedule and monitor the HGV mobile mechanics workload in the most effectiveand efficient way possible. Respond to daily changes in the HGV mobile mechanics workload in a positive andprofessional manner. Liaise with HGV mobile mechanics daily, ensuring they have all the customers needs inorder for the work required. Organise the movement of parts, both collecting and/or delivering, for the HGV mobilemechanics and our customers, ensuring the best rates on these parts. Respond to email and phone enquiries in a positive and professional manner. Engage with the client base regarding all aspects of vehicle maintenance bookings. Ensuring all breakdown calls are administered with appropriate actions applied efficiently. Use of the appropriate party to attend breakdowns ensuring fix first time. Processing MOTs for ND Brown vehicles and liaising with customers to ensure allVehicles are MOT compliant. Arranging vehicle servicing in line with ND Brown / vehicle manufacturers service schedules. Booking LOLER or other related tests when required. Ensure all paperwork is checked and completed for all service, repair and maintenanceactivities. Process all commercial vehicle compliance documentation in R2C & Syrinx. Support the preparation and sending of client reports. Responsible for own health and safety and for the health and safety of your colleaguesand your environment. Help and support as and when requested in the breakdown operations team. Any other task which may be a reasonable request during your day-to-day role. Experience/Skills Competence in IT/Computer skills and database entry essential. Good communication is essential. Excellent attention to detail is essential. Effective organisation/planning skills are essential Good geographical knowledge is necessary. Experience in customer service background preferred. Commercial vehicle management and service industry experience preferred. Qualified mechanical background or knowledge of the HGV industry is desirable. Working knowledge of r2c & Syrinx desirable. Working Hours Monday Friday, 8:00am 5:00pm. (Full time) Benefits Company pension scheme. Competitive Salary JBRP1_UKTJ

Role: Field Service Engineer Location: Midlands Salary: £43,00 - £50,000 + overtime + company vehicle Position Description Based from home and working throughout the Midlands, the Field Service Engineer (Mechatronic) is responsible for providing on site and remote support for the range of company products on which they have been trained. Responsibilities • Responsible for Installing, investigating and repairing machine faults of both, • Electrical and a Mechanical nature assigned by the CSC (Customer Support Centre), • Plan and prepare the correct parts/equipment and resource needed for repairs assigned to you in a timely manner., • Ensure clear communication of escalations/ problems / concerns or delays to the CSC / Supervisor / Customer and follow up with a report if required., • To assist customers and internal staff with the identification of spare parts., • Customer facing – clear communication to customer both verbal and written – take ownership of faults / calls assigned to you, • Demonstrate flexibility with start and finish times and cross skilling, • Provide Helpdesk / Telephone / Remote support when required., • Observe Health and Safety & Working time regulations. To follow and Adhere to the Company handbook and company policy and procedures. Skills • A wide range of electrical, mechanical and computer-based engineering skills., • Experience of working on commercial equipment within a production environment alone and as part of a team is required., • Consistently displaying a positive attitude towards customer service is a necessity, as is the ability to work within a close team, whilst displaying the necessary individual initiative required to achieve and maintain service targets and KPI's., • Good communication, IT and customer liaison skills are essential to this role. For further details, please contact Nick Sollis – 01453 829767 or email your cv Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few. Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process. JBRP1_UKTJ

Position Title:Multi-Skilled Engineer - Wombourne Position Type: Regular - Full-Time Requisition ID: 43819 Multi-Skilled Engineers - Wombourne In every role, McCainers are ambitious, curious, and passionate about creating exceptional work experiences - together. With a customer-first mindset, we make doing business with McCain easy. Don't see the role you're looking for? Register your interest anyway. We're always on the lookout for brilliant engineers. Even when we don't have a live vacancy, we want to hear from talented, multi-skilled engineers who are ready to make their mark. So if you've got the skills and you're ready for your next challenge, don't wait - send us your details and when the right opportunity comes up, we'll already know your name. About working in Engineering at McCain. Our manufacturing plants run around the clock producing some of the UK's most loved food products - and our engineers are the heartbeat of everything we do. From the moment potatoes arrive at our factory gates to the finished product heading out the door, our engineering teams keep every stage of that process moving safely, efficiently, and reliably. This isn't a role where you clock in, fix one thing, and clock off. Our plants are complex, fast-moving environments where no two shifts are ever the same. You'll be working across mechanical and electrical disciplines, responding to both planned and unplanned maintenance, driving continuous improvement, and playing a real part in keeping production running at its best. With automation on the rise, staying ahead is non-negotiable - and our engineers are right at the sharp end of that challenge. If you thrive under pressure, love problem-solving, and want to feel genuinely proud of what you do, this is the environment for you. What kinds of roles do we typically recruit for? We recruit at all levels of engineering, from skilled craftspeople through to team leaders and chargehands. Whether you're a hands-on engineer, or someone who's ready to step into a leadership position and bring a team with you, we want to hear from you. Roles vary across our sites in terms of shift patterns and specific focus areas - but all share the same core: technical excellence, safety-first thinking, and a drive to keep our plants performing at their very best. What you'll typically be doing. • Carrying out planned and reactive maintenance across the manufacturing site, keeping plant and equipment running reliably and safely, • Diagnosing faults quickly and effectively - getting to root cause and putting lasting fixes in place, • Working closely with production teams to make sure standards are always being met and any issues are communicated clearly and promptly, • Contributing to and leading continuous improvement activity, finding smarter, faster, better ways to do things, • Using and updating our Computerised Maintenance Management System (CMMS) to maintain accurate records of all work completed, • Supporting lean manufacturing principles and helping embed best practice across the team, • Working safely at all times, taking personal responsibility for your own wellbeing and that of everyone around you, • At more senior levels: organising and prioritising shift workloads, providing technical support to the team, and ensuring contractors are inducted and working safely on siteWhat you'll need to be successful. We're looking for Multi-Skilled Engineers - people who are as comfortable with a mechanical challenge as they are with an electrical one. You'll already know what it takes to keep a manufacturing plant moving, so we won't labour the obvious. But here's what we'll be looking for: Qualifications (or equivalent): • NVQ Level 2/3, BTEC Level 3, or City & Guilds Part 3 in a relevant engineering discipline - one of these is essential, • A time-served apprenticeship - essential, • HNC or National Certificate (ONC) in a relevant discipline - desirable, • IOSH or NEBOSH certificate - desirableExperience & knowledge:, • Proven experience in a maintenance role within a manufacturing or industrial environment, • Strong fault-finding skills across both electrical and mechanical systems, • Knowledge of SCADA systems and PLC fault finding - desirable, • Understanding of modern maintenance techniques and lean manufacturing principles, • Familiarity with health and safety legislation and safe systems of work, • Experience using a CMMS or similar maintenance management toolSkills & behaviours:, • Genuinely multi-skilled - confident working across disciplines, • A natural problem solver who acts on their own initiative, • Strong communicator who can explain technical information clearly to both engineering and operational colleagues, • Able to work at pace without cutting corners - organised, prioritised, and calm under pressure, • A team player who lifts others around them, not just themselves, • Computer literate - comfortable with Microsoft Windows and Office applicationsBenefits. Although we do encourage you to taste the goods, you'll be pleased to know we don't pay you in chips. Our engineering salaries are competitive within the local area, and we can share the details once you've applied. Alongside your salary, you'll enjoy: • An excellent salary sacrifice pension scheme where we'll contribute double what you do, up to a maximum of 12% of your pay, • 25 days' annual leave from day one plus bank holidays (increasing with service), with the option to buy and sell up to 5 days per year, • Medicash health cash plan - claim money back on everyday healthcare costs including dental, optical, and physiotherapy, with 24/7 virtual GP access and mental health support, • Life insurance cover providing peace of mind for you and your family, • Enhanced maternity and paternity pay, because the moments that matter outside of work matter to us too, • TELUS Health employee and family assistance programme - including a 24/7 confidential counselling line, legal and financial guidance, and a range of employee discounts, • Salary sacrifice cycle to work scheme, • A paid 'Chips In' Volunteering Day, giving you the chance to make a positive difference in your communityAnd because you're joining a global business, your career opportunities don't stop at the factory gate. Whether you want to deepen your technical expertise, move into leadership, or explore opportunities internationally - we'll back your growth. With ambitious plans for the future, there's plenty of scope to develop your career with us. About McCain. Click here to learn more about McCain and how we provide you with opportunities to make an impact that matters. Leadership Principles. At McCain, our leadership principles guide how we engage with customers, collaborate as a team, and achieve results. We are customer obsessed, curious, and driven. We think big, act like owners, and bring out the best in our people. We foster trust and inclusion, create space for healthy debate, and commit to decisions together. These aren't just words on a wall - they're how we show up every day. The McCain Experience. We are McCain. This statement is a testament to our collective strength and our individual value. Your contributions play a vital role in our success. Our winning culture is rooted in authenticity and trust, empowering us to bring out the best in one another. Here, you'll find opportunities to learn, grow, and thrive. Join us and experience why we're better together. Ready to register your interest? Even if we don't have a live role right now, we'd love to hear from you. Submit your CV and a brief note about the type of engineering role you're looking for and we'll be in touch when something comes up that fits. We are McCain. McCain Foods is an equal opportunity employer. As a global family-owned company, we strive to be the employer of choice in the diverse communities around the world in which we live and work. We recognize that inclusion drives our creativity, resilience, and success and makes our business stronger. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, veteran status, disability, or any other protected characteristic under applicable law. McCain is an accessible employer. If you require an accommodation throughout the recruitment process (including alternate formats of materials or accessible meeting rooms), please let us know and we will work with you to find appropriate solutions. Your privacy is important to us. By submitting personal data or information to us, you agree this will be handled in accordance with McCain's Global Privacy Policy and Global Employee Privacy Policy, as applicable. McCain leverages AI in the hiring process, though all final decisions are made by humans. You can understand our approach to AI and how your personal information is being handled here. Job Family: Engineering & Technical Location(s): GB - United Kingdom : England : Wombourne Company: JBRP1_UKTJ

At Dalkia, we're driven by a shared purpose: tackling climate change and building a better, more sustainable future. We bring together talented people who share knowledge, challenge each other and grow together. Backed by EDF, Britain's biggest generator of low carbon electricity, we're a people-first culture. With 5,000+ employees and £600m+ turnover, we combine the strength of a major group with a great culture, innovative mindset and inclusive values making Dalkia a great place to work and grow your career. At Dalkia, our mission is to deliver a better experience—for our clients, communities, and our people. As a Senior Technical Manager, you will play a pivotal leadership role within our Technical Management team, helping drive technical excellence across complex MEP projects. This is a project-based role with a strong focus on pre-construction, where you will lead the technical strategy, challenge and interrogate designs, and de-risk projects before they reach site. You will work across the full project lifecycle, collaborating with internal teams and external partners to ensure designs are coordinated, compliant, and deliverable. You will be part of a wider technical community supporting projects across multiple sectors, contributing to Dalkia's ambition to become the UK's number one technical solutions provider We are looking for a highly capable and collaborative technical leader who can: • Take ownership of design and technical management during pre-construction phases, • Develop and manage technical strategies and deliverables plans aligned with project goals, • Identify, manage, and mitigate design and technical risks, • Lead technical reviews and challenge design solutions to ensure best outcomes, • Ensure effective design coordination and communication across multidisciplinary teams, • Engage the right technical specialists at the right time to support project success, • Drive value engineering and design optimisation, • Ensure compliance with:, • Building Safety Act (BSA), • CDM Regulations, • Industry standards and best practice, • Manage relationships with clients, consultants, supply chain partners, and internal stakeholders, • Proven experience leading MEP design management on complex construction projects, • Strong understanding of pre-construction processes and technical risk mitigation, • Ability to manage and influence multi-disciplinary teams and stakeholders, • Confident communicator with the ability to challenge and interrogate design solutions, • Demonstrable experience delivering projects in sectors such as:, • Healthcare, • Commercial, • Leisure, • MOD / MOJ (desirable), • Strong commercial awareness, including consultant scope and fee management, • A collaborative mindset aligned to Dalkia's values:, • People first, • Better together, • Trusted partners, • Taking responsibility, • Degree in Mechanical Engineering, Electrical Engineering, or related Building Services discipline (BEng, MEng, or MSc), • Chartered or Incorporated Engineer status (or working towards) with a relevant institution such as:, • CIBSE, • IET, • IMechE, • Demonstrable breadth of experience across Building Services Engineering, • Experience managing projects with £5M–£50M MEP value People First – It starts with health, safety and wellbeing Better Together – A collaborative team Trusted Partners – Dedicated to our clients' success Taking Responsibility – Making a positive difference We're committed to an inclusive and fair recruitment process. If you need any adjustments please let us know, in confidence, our team is here to support you. #J-18808-Ljbffr

At Dalkia, we're driven by a shared purpose: tackling climate change and building a better, more sustainable future. We bring together talented people who share knowledge, challenge each other and grow together. Backed by EDF, Britain's biggest generator of low carbon electricity, we're a people-first culture. With 5,000+ employees and £600m+ turnover, we combine the strength of a major group with a great culture, innovative mindset and inclusive values making Dalkia a great place to work and grow your career. At Dalkia, our mission is to deliver a better experience—for our clients, communities, and our people. As a Senior Technical Manager, you will play a pivotal leadership role within our Technical Management team, helping drive technical excellence across complex MEP projects. This is a project-based role with a strong focus on pre-construction, where you will lead the technical strategy, challenge and interrogate designs, and de-risk projects before they reach site. You will work across the full project lifecycle, collaborating with internal teams and external partners to ensure designs are coordinated, compliant, and deliverable. You will be part of a wider technical community supporting projects across multiple sectors, contributing to Dalkia's ambition to become the UK's number one technical solutions provider We are looking for a highly capable and collaborative technical leader who can: • Take ownership of design and technical management during pre-construction phases, • Develop and manage technical strategies and deliverables plans aligned with project goals, • Identify, manage, and mitigate design and technical risks, • Lead technical reviews and challenge design solutions to ensure best outcomes, • Ensure effective design coordination and communication across multidisciplinary teams, • Engage the right technical specialists at the right time to support project success, • Drive value engineering and design optimisation, • Ensure compliance with:, • Building Safety Act (BSA), • CDM Regulations, • Industry standards and best practice, • Manage relationships with clients, consultants, supply chain partners, and internal stakeholders, • Proven experience leading MEP design management on complex construction projects, • Strong understanding of pre-construction processes and technical risk mitigation, • Ability to manage and influence multi-disciplinary teams and stakeholders, • Confident communicator with the ability to challenge and interrogate design solutions, • Demonstrable experience delivering projects in sectors such as:, • Healthcare, • Commercial, • Leisure, • MOD / MOJ (desirable), • Strong commercial awareness, including consultant scope and fee management, • A collaborative mindset aligned to Dalkia's values:, • People first, • Better together, • Trusted partners, • Taking responsibility, • Degree in Mechanical Engineering, Electrical Engineering, or related Building Services discipline (BEng, MEng, or MSc), • Chartered or Incorporated Engineer status (or working towards) with a relevant institution such as:, • CIBSE, • IET, • IMechE, • Demonstrable breadth of experience across Building Services Engineering, • Experience managing projects with £5M–£50M MEP value People First – It starts with health, safety and wellbeing Better Together – A collaborative team Trusted Partners – Dedicated to our clients' success Taking Responsibility – Making a positive difference We're committed to an inclusive and fair recruitment process. If you need any adjustments please let us know, in confidence, our team is here to support you. #J-18808-Ljbffr

At Dalkia, we're driven by a shared purpose: tackling climate change and building a better, more sustainable future. We bring together talented people who share knowledge, challenge each other and grow together. Backed by EDF, Britain's biggest generator of low carbon electricity, we're a people-first culture. With 5,000+ employees and £600m+ turnover, we combine the strength of a major group with a great culture, innovative mindset and inclusive values making Dalkia a great place to work and grow your career. At Dalkia, our mission is to deliver a better experience—for our clients, communities, and our people. As a Senior Technical Manager, you will play a pivotal leadership role within our Technical Management team, helping drive technical excellence across complex MEP projects. This is a project-based role with a strong focus on pre-construction, where you will lead the technical strategy, challenge and interrogate designs, and de-risk projects before they reach site. You will work across the full project lifecycle, collaborating with internal teams and external partners to ensure designs are coordinated, compliant, and deliverable. You will be part of a wider technical community supporting projects across multiple sectors, contributing to Dalkia's ambition to become the UK's number one technical solutions provider We are looking for a highly capable and collaborative technical leader who can: • Take ownership of design and technical management during pre-construction phases, • Develop and manage technical strategies and deliverables plans aligned with project goals, • Identify, manage, and mitigate design and technical risks, • Lead technical reviews and challenge design solutions to ensure best outcomes, • Ensure effective design coordination and communication across multidisciplinary teams, • Engage the right technical specialists at the right time to support project success, • Drive value engineering and design optimisation, • Ensure compliance with:, • Building Safety Act (BSA), • CDM Regulations, • Industry standards and best practice, • Manage relationships with clients, consultants, supply chain partners, and internal stakeholders, • Proven experience leading MEP design management on complex construction projects, • Strong understanding of pre-construction processes and technical risk mitigation, • Ability to manage and influence multi-disciplinary teams and stakeholders, • Confident communicator with the ability to challenge and interrogate design solutions, • Demonstrable experience delivering projects in sectors such as:, • Healthcare, • Commercial, • Leisure, • MOD / MOJ (desirable), • Strong commercial awareness, including consultant scope and fee management, • A collaborative mindset aligned to Dalkia's values:, • People first, • Better together, • Trusted partners, • Taking responsibility, • Degree in Mechanical Engineering, Electrical Engineering, or related Building Services discipline (BEng, MEng, or MSc), • Chartered or Incorporated Engineer status (or working towards) with a relevant institution such as:, • CIBSE, • IET, • IMechE, • Demonstrable breadth of experience across Building Services Engineering, • Experience managing projects with £5M–£50M MEP value People First – It starts with health, safety and wellbeing Better Together – A collaborative team Trusted Partners – Dedicated to our clients' success Taking Responsibility – Making a positive difference We're committed to an inclusive and fair recruitment process. If you need any adjustments please let us know, in confidence, our team is here to support you. #J-18808-Ljbffr

About Amodo Amodo is a hardware engineering company building the 21st century's most important technologies. Our team of mechanical, electronic, firmware, and software engineers are trusted by world-leading startups, universities, governments and philanthropists to solve pressing technical challenges. See who they are on our website - including MIT, Cambridge, Oxford, Imperial, ARIA and Rand Corp. We are selective in the projects we take on and proactive in seeking out where our exceptional engineering teams can make the most impact. We believe in differential technology development: deliberately accelerating safety-enhancing technologies to ensure human flourishing. Not every technology is inevitable rather, the market fails to incentivise key domains. We work in these areas. We are accepting applications from varying seniority levels, from Graduate to Principal Engineer, and will adjust terms accordingly. What do we do? At Amodo you will work with a world class team to create some of the most important technologies of our time. We focus on high speed development and real world impact, making sure were continually delivering tangible, concrete progress across the board. You will see your designs manufactured and distributed globally, your research inform policy, and you will support multi-million pound projects. Were currently focused on four key fields: AI safety, biosecurity, humane tech, and accelerating science (developing the hardware tools that scientific breakthroughs require, but don't yet exist). In addition to client work, we want to bring our inventions into the world as spin-out companies, open-source projects, and products. We're actively hiring people to take charge of making this happen. New invention & new research - We design and build new products, equipment, and tools. Invention and rapid iteration are core to our DNA. We use these new inventions and our experience to perform new research and push boundaries. More products than powerpoints - Common failure modes of todays consultancies include risk aversion, theatre for clients, and misrepresentation of what is important in projects. We reject this approach. Were here to do truth-seeking, progress-optimising engineering, not to make slide decks. Work that matters - Unlike many consultancies we also get involved at the pre-product stage. Our experience in industry and biotech puts us in the position to run feasibility studies for new and existing companies. This research-heavy work can include literature reviews, feasibility modelling and market research. A bit on our culture and what it would look like to work here: • Our values: Truth-seeking, excellent, enthusiastic, kind, humble, and always learning, • Our approach: We think before diving in, iterate fast, and focus on the highest-impact 80/20 work. We favour rapid experimentation, quick feedback loops, and sprinting to "something that works" rather than over-planning., • Feedback culture: We practice radical candor, which means being clear and direct while staying kind, and welcoming feedback at every level, • No "not my job"-ism: If we see something wrong, we fix it. If your part of a project is going great and another is struggling, don't settle for polishing a chunk of a struggling ship, • Socials: Table tennis every lunch, personal project evenings, pub trips, trail running club, and more, • Office: Spacious, modern space in central Sheffield, with parking and bike storage. In-house workshop and equipment for our mechanical and electrical work., • Project structure: You will generally be on 1 main project at a time, whilst supporting on 1-2 smaller projects. Team sizes vary from 2-10+ engineers, where most are ~4. Durations largely are within the 2 - 8 months range., • Project variety: We get to work on loads of super varied, technically complex and interesting projects, from drone mounted laser holography for climate-tech to next-gen motors. About you We value drive, culture fit, and a track-record of engineering excellence and above all else, but the below competencies, interests, and attributes are extremely desirable: • Strong background in electronic design - component selection, schematic design, PCB layout, and component procurement, • Experience with hand THT and SMD PCB assembly and modifications, • Circuit inspection and debugging using oscilloscopes and logic analysers Alongside the above, the below competencies will strengthen an application: • Producing embedded firmware (C/C++), • Familiarity with mechanical design, • SPICE and/or RF simulation experience, • Experience balancing functional electronic design requirements with additional constraints (such as thermal, mechanical, and power requirements etc.), • An eye for beautiful and practically achievable design Weve doubled year on year since our founding in 2023, and we aim to do so again in 2026. That means we're actively hiring across electronics, FPGA, mechanical, firmware, software, physics, HPC infrastructure, and DevOps - plus exceptional talent in any discipline. If you're an ambitious top performer, engineering or otherwise, please fill in our form linked. Benefits • Free lunch every day, • Flexible hybrid working, • Flexible working hours, • 35 days holiday (including bank holidays), • We can pay your professional registration and institution fees, • Relocation assistance may be negotiated, • £300 annual personal project budget with weekly maker evenings (tools, pizza and support provided) To let you know a bit more about what to expect, our core interview process is as follows. We may occasionally include 1-3 additional stages, including aptitude tests or video calls with one of our founders. • 15 minute technical screening interview, • 1 hour technical interview, • 1.5 hour in-person interview, • Offer. JBRP1_UKTJ

At Dalkia, we're driven by a shared purpose: tackling climate change and building a better, more sustainable future. We bring together talented people who share knowledge, challenge each other and grow together. Backed by EDF, Britain's biggest generator of low carbon electricity, we're a people-first culture. With 5,000+ employees and £600m+ turnover, we combine the strength of a major group with a great culture, innovative mindset and inclusive values making Dalkia a great place to work and grow your career. At Dalkia, our mission is to deliver a better experience—for our clients, communities, and our people. As a Senior Technical Manager, you will play a pivotal leadership role within our Technical Management team, helping drive technical excellence across complex MEP projects. This is a project-based role with a strong focus on pre-construction, where you will lead the technical strategy, challenge and interrogate designs, and de-risk projects before they reach site. You will work across the full project lifecycle, collaborating with internal teams and external partners to ensure designs are coordinated, compliant, and deliverable. You will be part of a wider technical community supporting projects across multiple sectors, contributing to Dalkia's ambition to become the UK's number one technical solutions provider We are looking for a highly capable and collaborative technical leader who can: • Take ownership of design and technical management during pre-construction phases, • Develop and manage technical strategies and deliverables plans aligned with project goals, • Identify, manage, and mitigate design and technical risks, • Lead technical reviews and challenge design solutions to ensure best outcomes, • Ensure effective design coordination and communication across multidisciplinary teams, • Engage the right technical specialists at the right time to support project success, • Drive value engineering and design optimisation, • Ensure compliance with:, • Building Safety Act (BSA), • CDM Regulations, • Industry standards and best practice, • Manage relationships with clients, consultants, supply chain partners, and internal stakeholders, • Proven experience leading MEP design management on complex construction projects, • Strong understanding of pre-construction processes and technical risk mitigation, • Ability to manage and influence multi-disciplinary teams and stakeholders, • Confident communicator with the ability to challenge and interrogate design solutions, • Demonstrable experience delivering projects in sectors such as:, • Healthcare, • Commercial, • Leisure, • MOD / MOJ (desirable), • Strong commercial awareness, including consultant scope and fee management, • A collaborative mindset aligned to Dalkia's values:, • People first, • Better together, • Trusted partners, • Taking responsibility, • Degree in Mechanical Engineering, Electrical Engineering, or related Building Services discipline (BEng, MEng, or MSc), • Chartered or Incorporated Engineer status (or working towards) with a relevant institution such as:, • CIBSE, • IET, • IMechE, • Demonstrable breadth of experience across Building Services Engineering, • Experience managing projects with £5M–£50M MEP value People First – It starts with health, safety and wellbeing Better Together – A collaborative team Trusted Partners – Dedicated to our clients' success Taking Responsibility – Making a positive difference We're committed to an inclusive and fair recruitment process. If you need any adjustments please let us know, in confidence, our team is here to support you. #J-18808-Ljbffr

About Safran Actuation Systems UK Safran Actuation Systems UK is a world class centre for the design, manufacture and support of cutting-edge actuation and flight control solutions used across commercial, military and rotary platforms. With major sites in Wolverhampton and Banbury, our teams play a critical role in delivering innovative, reliable and safe systems that keep aircraft performing at their best. Our UK Actuation business brings together engineering excellence, advanced manufacturing capability and a proud heritage within the aerospace sector. Whether supporting major global programmes or developing the next generation of actuation technologies, our people are at the heart of everything we do. As part of Safran's global network, joining Safran Actuation Systems UK means becoming part of a highly skilled, collaborative and forward thinking team with opportunities to grow, innovate and make a meaningful impact in the future of aerospace. Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision We are looking for passionate individuals to join our Manufacturing Engineering team as a Manufacturing Engineer - Industrialisation at our Wolverhampton site. About Safran Actuation Systems UK Safran Actuation Systems UK is a world class centre for the design, manufacture and support of cutting-edge actuation and flight control solutions used across commercial, military and rotary platforms. With major sites in Wolverhampton and Banbury, our teams play a critical role in delivering innovative, reliable and safe systems that keep aircraft performing at their best. Our UK Actuation business brings together engineering excellence, advanced manufacturing capability and a proud heritage within the aerospace sector. Whether supporting major global programmes or developing the next generation of actuation technologies, our people are at the heart of everything we do. As part of Safran's global network, joining Safran Actuation Systems UK means becoming part of a highly skilled, collaborative and forward thinking team with opportunities to grow, innovate and make a meaningful impact in the future of aerospace. Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: -Competitive salary -Company performance bonus scheme -Pension scheme - up to 10% employer contribution -Private medical insurance -Comprehensive health cash plan -25 days annual leave + bank holidays -Flexible benefits programme (buy & sell holiday allowance, discounted gym memberships, Maternity/ adoption leave- up to 52 weeks, first 26 weeks at full pay, subsequent 26 at 50% (basic pay) and Paternity/Non-Pregnant Parent/ Co-adopter leave 4 weeks full pay) -Structured training & opportunities to progress Your Role As a Manufacturing Engineer focused on Industrialisation, you will play a key role in bringing new products and processes into production within a transformative manufacturing environment. You will plan and lead the implementation of manufacturing processes on site, including facility setup, equipment installation, commissioning, and process validation, ensuring full production readiness. This will include leading insourcing projects, transferring Production facilities & processes into the plant, and ensuring they are stable, efficient, and capable from day one. Working closely with cross-functional teams, you will ensure that manufacturing systems meet safety, quality, cost, and delivery requirements, while driving continuous improvement and operational excellence Here, we craft excellence together. If you're ready to take your career to new heights and be part of a company that's crafting the future of flight, apply today. Why Safran? A global presence: Be part of a global aerospace, defence & space business with over 100,000 Colleagues, across 300 sites in 30 countries. Inclusive & empowering environment: We celebrate our differences and believe they make us stronger. We know that a fulfilling work environment is a key driver for innovative ideas and team success. -Innovation at the core: Join our mission to decarbonise aerospace and make the world a safer place. Your ambitions can take us further. -Mobility & training opportunities: We can support your ambitions with training, development, a personalised career plan and mobility opportunities. If you have big dreams, we'll support you to make them a reality. -A culture of excellence: Join a team that values collaboration, integrity, and continuous improvement. Whatever your background, together we aim for excellence. Get involved: We also have a number of groups and forums across our sites that you can get involved with, including Women at Safran, Diversity at Safran, Sports Clubs, STEM ambassadors, Employee Forum, Charity Partnerships and Wellbeing Programs. What You'll Bring Essential: -Degree or apprenticeship in Mechanical, Manufacturing Engineering or a related field -Experience in manufacturing engineering/industrialization -Relevant experience of project management & risk mitigation planning -Hands-on experience with APQP, PPAP, PFMEA and control plans -Good understanding of machining, assembly and testing processes -Proven ability to deliver process validation, pilot builds, and production ramp-up -Strong problem-solving mindset with a focus on quality and process capability Desirable: -Experience in aerospace, automotive or high-precision manufacturing environments -Familiarity with AS9100 and AS9145 standards -Exposure to insourcing or manufacturing transfer projects -Knowledge of SPC / process capability (Cpk) JBRP1_UKTJ

Position Title : Service Engineer - Electrical Bias Location: UK Reports to : Area manager / Co Ordinator Job Purpose : Responsible for the installation, service and maintenance of GPI machinery in customer facilities. The incumbent is a key member of the Technical Service team and partners with our converting and sales teams to meet the needs of the customer. Key Responsibilities Conducts top-level troubleshooting, diagnosis and repair of electrical, mechanicaland controls related problems on machines installed at customer locations, including overhauls and field upgrades as necessary Participates in the development, processing and follow up of specifications during machinery tests, debugging and start up, as well as, during the development and field testing of new carton designs Develops and maintains productive working relationships with customers and acts professionally and proactively to resolve equipment, cartons or service-related issues As the technical expert, partners with sales and converting manufacturing individuals and teams to resolve customer issues, as well as, support new business opportunities and product development projects Applies continuous improvement concepts and techniques to increase equipment productivity.Participates in process improvement and cost reduction initiatives. Effectively utilizes IT systems (in-house and standard applications) Maintains skill base necessary and consistent with machinery and carton technology Provides instruction and training to customers staff on safety, operations, machinery maintenance and proper carton handling procedures Prepares service reports, modified schematics, standard operating procedures and carton specification updates to support field initiatives and changes Reports on progress of projects / assignments to all internal and external stakeholders Conducts audits, evaluations and assessment of machine systems / performance results Liaises with other companies / OEMs working on common projects This is a summary of the key responsibilities of this position. The Company reserves the right to require the role-holder to undertake such additional tasks or duties as may be within their capabilities and abide by all reasonable rules and instruction given by the Company. Qualifications and Experience 4 or more years of related experience and/or formal training in equipment maintenance, repair and troubleshooting. Knowledge of packaging or similar equipment is advantageous Technical training with graduation or education of industrial or mechanical engineering Demonstrated ability to read electrical, mechanical engineering PLC and operator interface knowledge/experience. Intermediate level of PLC expertise preferably on Siemens TIA Portal and Step 7 platform. Rockwell control Logix 5000 and Studio 5000 would be acceptable. Must be prepared to travel if required on short notice. Working hours are flexible to meet Customer demands. Some shift / out of hours working will be required as necessary. Higher level of English reading, writing and speaking skills Full clean driving license Key Competencies Effective communicator, both orally and written, with internal and external customers Successfully identifies root causes and resolves problems and issues Develops positive customer relationships through customer-focused mindset, build trust Is a team player, works well with others inside and outside the organization? Detail-orientated and technically minded Is a self-starter, has initiative, can effectively work independently with minimal direct supervision Effectively manages time, plans, projects and related tasks Flexible approach to ensure timely and professional service to support customer and the internal manufacturing process Continuously meet targets and objectives, accountable for results TPBN1_UKTJ

At Dalkia, we're driven by a shared purpose: tackling climate change and building a better, more sustainable future. We bring together talented people who share knowledge, challenge each other and grow together. Backed by EDF, Britain's biggest generator of low‑carbon electricity, we're a people‑first culture. With 5,000+ employees and £600m+ turnover, we combine the strength of a major group with a great culture, innovative mindset and inclusive values, making Dalkia a great place to work and grow your career. At Dalkia, our mission is to deliver a better experience—for our clients, communities, and our people. As a Senior Technical Manager, you will play a pivotal leadership role within our Technical Management team, helping drive technical excellence across complex MEP projects. This is a project‑based role with a strong focus on pre‑construction, where you will lead the technical strategy, challenge and interrogate designs, and de‑risk projects before they reach site. You will work across the full project lifecycle, collaborating with internal teams and external partners to ensure designs are coordinated, compliant, and deliverable. You will be part of a wider technical community supporting projects across multiple sectors, contributing to Dalkia's ambition to become the UK's number one technical solutions provider. We are looking for a highly capable and collaborative technical leader who can: • Take ownership of design and technical management during pre‑construction phases, • Develop and manage technical strategies and deliverables plans aligned with project goals, • Identify, manage, and mitigate design and technical risks, • Lead technical reviews and challenge design solutions to ensure best outcomes, • Ensure effective design coordination and communication across multidisciplinary teams, • Engage the right technical specialists at the right time to support project success, • Drive value engineering and design optimisation, • Ensure compliance with Building Safety Act (BSA), CDM Regulations, Industry standards and best practice, • Manage relationships with clients, consultants, supply chain partners, and internal stakeholders, • Proven experience leading MEP design management on complex construction projects, • Strong understanding of pre‑construction processes and technical risk mitigation, • Ability to manage and influence multi‑disciplinary teams and stakeholders, • Confident communicator with the ability to challenge and interrogate design solutions, • Demonstrable experience delivering projects in sectors such as Healthcare, Commercial, Leisure, and MOD / MOJ (desirable), • Strong commercial awareness, including consultant scope and fee management, • A collaborative mindset aligned to Dalkia's values: People first, Better together, Trusted partners, Taking responsibility, • Degree in Mechanical Engineering, Electrical Engineering, or related Building Services discipline (BEng, MEng, or MSc), • Chartered or Incorporated Engineer status (or working towards) with a relevant institution such as CIBSE, IET, IMechE, • Demonstrable breadth of experience across Building Services Engineering, • Experience managing projects with £5M–£50M MEP value People First – It starts with health, safety and wellbeing Better Together – A collaborative team Trusted Partners – Dedicated to our clients' success Taking Responsibility – Making a positive difference We're committed to an inclusive and fair recruitment process. If you need any adjustments, please let us know, in confidence, our team is here to support you. #J-18808-Ljbffr

At Dalkia, we're driven by a shared purpose: tackling climate change and building a better, more sustainable future. We bring together talented people who share knowledge, challenge each other and grow together. Backed by EDF, Britain's biggest generator of low‑carbon electricity, we're a people‑first culture. With 5,000+ employees and £600m+ turnover, we combine the strength of a major group with a great culture, innovative mindset and inclusive values, making Dalkia a great place to work and grow your career. At Dalkia, our mission is to deliver a better experience—for our clients, communities, and our people. As a Senior Technical Manager, you will play a pivotal leadership role within our Technical Management team, helping drive technical excellence across complex MEP projects. This is a project‑based role with a strong focus on pre‑construction, where you will lead the technical strategy, challenge and interrogate designs, and de‑risk projects before they reach site. You will work across the full project lifecycle, collaborating with internal teams and external partners to ensure designs are coordinated, compliant, and deliverable. You will be part of a wider technical community supporting projects across multiple sectors, contributing to Dalkia's ambition to become the UK's number one technical solutions provider. We are looking for a highly capable and collaborative technical leader who can: • Take ownership of design and technical management during pre‑construction phases, • Develop and manage technical strategies and deliverables plans aligned with project goals, • Identify, manage, and mitigate design and technical risks, • Lead technical reviews and challenge design solutions to ensure best outcomes, • Ensure effective design coordination and communication across multidisciplinary teams, • Engage the right technical specialists at the right time to support project success, • Drive value engineering and design optimisation, • Ensure compliance with Building Safety Act (BSA), CDM Regulations, Industry standards and best practice, • Manage relationships with clients, consultants, supply chain partners, and internal stakeholders, • Proven experience leading MEP design management on complex construction projects, • Strong understanding of pre‑construction processes and technical risk mitigation, • Ability to manage and influence multi‑disciplinary teams and stakeholders, • Confident communicator with the ability to challenge and interrogate design solutions, • Demonstrable experience delivering projects in sectors such as Healthcare, Commercial, Leisure, and MOD / MOJ (desirable), • Strong commercial awareness, including consultant scope and fee management, • A collaborative mindset aligned to Dalkia's values: People first, Better together, Trusted partners, Taking responsibility, • Degree in Mechanical Engineering, Electrical Engineering, or related Building Services discipline (BEng, MEng, or MSc), • Chartered or Incorporated Engineer status (or working towards) with a relevant institution such as CIBSE, IET, IMechE, • Demonstrable breadth of experience across Building Services Engineering, • Experience managing projects with £5M–£50M MEP value People First – It starts with health, safety and wellbeing Better Together – A collaborative team Trusted Partners – Dedicated to our clients' success Taking Responsibility – Making a positive difference We're committed to an inclusive and fair recruitment process. If you need any adjustments, please let us know, in confidence, our team is here to support you. #J-18808-Ljbffr

At Dalkia, we're driven by a shared purpose: tackling climate change and building a better, more sustainable future. We bring together talented people who share knowledge, challenge each other and grow together. Backed by EDF, Britain's biggest generator of low‑carbon electricity, we're a people‑first culture. With 5,000+ employees and £600m+ turnover, we combine the strength of a major group with a great culture, innovative mindset and inclusive values, making Dalkia a great place to work and grow your career. At Dalkia, our mission is to deliver a better experience—for our clients, communities, and our people. As a Senior Technical Manager, you will play a pivotal leadership role within our Technical Management team, helping drive technical excellence across complex MEP projects. This is a project‑based role with a strong focus on pre‑construction, where you will lead the technical strategy, challenge and interrogate designs, and de‑risk projects before they reach site. You will work across the full project lifecycle, collaborating with internal teams and external partners to ensure designs are coordinated, compliant, and deliverable. You will be part of a wider technical community supporting projects across multiple sectors, contributing to Dalkia's ambition to become the UK's number one technical solutions provider. We are looking for a highly capable and collaborative technical leader who can: • Take ownership of design and technical management during pre‑construction phases, • Develop and manage technical strategies and deliverables plans aligned with project goals, • Identify, manage, and mitigate design and technical risks, • Lead technical reviews and challenge design solutions to ensure best outcomes, • Ensure effective design coordination and communication across multidisciplinary teams, • Engage the right technical specialists at the right time to support project success, • Drive value engineering and design optimisation, • Ensure compliance with Building Safety Act (BSA), CDM Regulations, Industry standards and best practice, • Manage relationships with clients, consultants, supply chain partners, and internal stakeholders, • Proven experience leading MEP design management on complex construction projects, • Strong understanding of pre‑construction processes and technical risk mitigation, • Ability to manage and influence multi‑disciplinary teams and stakeholders, • Confident communicator with the ability to challenge and interrogate design solutions, • Demonstrable experience delivering projects in sectors such as Healthcare, Commercial, Leisure, and MOD / MOJ (desirable), • Strong commercial awareness, including consultant scope and fee management, • A collaborative mindset aligned to Dalkia's values: People first, Better together, Trusted partners, Taking responsibility, • Degree in Mechanical Engineering, Electrical Engineering, or related Building Services discipline (BEng, MEng, or MSc), • Chartered or Incorporated Engineer status (or working towards) with a relevant institution such as CIBSE, IET, IMechE, • Demonstrable breadth of experience across Building Services Engineering, • Experience managing projects with £5M–£50M MEP value People First – It starts with health, safety and wellbeing Better Together – A collaborative team Trusted Partners – Dedicated to our clients' success Taking Responsibility – Making a positive difference We're committed to an inclusive and fair recruitment process. If you need any adjustments, please let us know, in confidence, our team is here to support you. #J-18808-Ljbffr

At Dalkia, we're driven by a shared purpose: tackling climate change and building a better, more sustainable future. We bring together talented people who share knowledge, challenge each other and grow together. Backed by EDF, Britain's biggest generator of low‑carbon electricity, we're a people‑first culture. With 5,000+ employees and £600m+ turnover, we combine the strength of a major group with a great culture, innovative mindset and inclusive values, making Dalkia a great place to work and grow your career. At Dalkia, our mission is to deliver a better experience—for our clients, communities, and our people. As a Senior Technical Manager, you will play a pivotal leadership role within our Technical Management team, helping drive technical excellence across complex MEP projects. This is a project‑based role with a strong focus on pre‑construction, where you will lead the technical strategy, challenge and interrogate designs, and de‑risk projects before they reach site. You will work across the full project lifecycle, collaborating with internal teams and external partners to ensure designs are coordinated, compliant, and deliverable. You will be part of a wider technical community supporting projects across multiple sectors, contributing to Dalkia's ambition to become the UK's number one technical solutions provider. We are looking for a highly capable and collaborative technical leader who can: • Take ownership of design and technical management during pre‑construction phases, • Develop and manage technical strategies and deliverables plans aligned with project goals, • Identify, manage, and mitigate design and technical risks, • Lead technical reviews and challenge design solutions to ensure best outcomes, • Ensure effective design coordination and communication across multidisciplinary teams, • Engage the right technical specialists at the right time to support project success, • Drive value engineering and design optimisation, • Ensure compliance with Building Safety Act (BSA), CDM Regulations, Industry standards and best practice, • Manage relationships with clients, consultants, supply chain partners, and internal stakeholders, • Proven experience leading MEP design management on complex construction projects, • Strong understanding of pre‑construction processes and technical risk mitigation, • Ability to manage and influence multi‑disciplinary teams and stakeholders, • Confident communicator with the ability to challenge and interrogate design solutions, • Demonstrable experience delivering projects in sectors such as Healthcare, Commercial, Leisure, and MOD / MOJ (desirable), • Strong commercial awareness, including consultant scope and fee management, • A collaborative mindset aligned to Dalkia's values: People first, Better together, Trusted partners, Taking responsibility, • Degree in Mechanical Engineering, Electrical Engineering, or related Building Services discipline (BEng, MEng, or MSc), • Chartered or Incorporated Engineer status (or working towards) with a relevant institution such as CIBSE, IET, IMechE, • Demonstrable breadth of experience across Building Services Engineering, • Experience managing projects with £5M–£50M MEP value People First – It starts with health, safety and wellbeing Better Together – A collaborative team Trusted Partners – Dedicated to our clients' success Taking Responsibility – Making a positive difference We're committed to an inclusive and fair recruitment process. If you need any adjustments, please let us know, in confidence, our team is here to support you. #J-18808-Ljbffr