Trabajos process operator en DerbyCrear alertas

Company Description Today, Assystem is among the top three independent nuclear engineering firms worldwide. With over 60 years of experience in highly regulated sectors, the group supports public and industrial stakeholders in the execution of complex and strategic infrastructure projects, subject to high safety and security requirements. Assystem mobilizes 8,000 experts in 13 countries and intervenes across the entire project lifecycle, in engineering, project management and digital solutions.Job Descriptionð Location: DerbyðContract role – Inside IR35Your future team:You will be joining a dynamic and collaborative commissioning team on-site at our Client in DerbyThis is an exciting opportunity for a contractor looking to contribute to a critical project and work within an embedded team. This role will be based in Derby. There is a high possibility that it will increase to a shift pattern later down the line as it moves into the next phase. Your Missions:ð Author and manage commissioning test procedures and prepare safe systems of workð Maintain accurate records of test resultsð§ Conduct commissioning tests and analyse resultsð️ Communicate effectively and manage processesð ️ Carry out Commissioning duties on systems such as; Nuclear, conventional and environmental safety systems, control systems, process monitoring and control instrumentation, wastewater tanks, Nuclear qualified cranes.QualificationsYour strengths and prerequisites for success: ð ️Experienced with commissioning electrical, instrumentation, and control systems on a Nuclear Licensed siteð¡️Familiar with Licence Condition 21 site arrangements, Health and Safety standards, permits, and safety case adherenceð§able to perform initial operator duties during commissioning testing phases. (i.e., Non active commissioning).ð Skilled in authoring test procedures and reportsð§ Understanding of design, construction, and handover processesAdditional InformationPlease be aware that many roles at Assystem are subject to both security and export control restrictions.These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation.All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks.We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.NOTICE TO CANDIDATES ON RECRUITMENT FRAUD - We are committed to safeguarding candidates from fraudulent activity associated with our recruitment process. Please note that we will never offer specialist CV writing services, request payment or ask for sensitive personal information during the recruitment process.We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.SummaryType: Full-timeFunction: EngineeringExperience level: Mid-Senior LevelIndustry: Management Consulting

Job Title: Field Service and Plant Engineer Location: Based in Derby,DE6 Salary: £40,000 per annum depending on experience Job Type: Permanent, Full time Hours / Working Pattern: 40 hours per week, from 8:00am to 5:00pm, with a 30-minute lunch break. Flexibility is required to work additional hours when needed. Approved overtime will be paid at 1.5 times the standard hourly rate. About Us: Compact & Bale Ltd are an award-winning company that supplies 100s of machines and collects 1000s of tonnes of material for recycling and recovery each year. Our clients include leading retail, manufacturing, warehouse and distribution businesses together with local authorities, hospitals, shopping centres, garden centres and recyclers. Duties & Responsibilities: Conduct installation, maintenance and repair of compactors, balers and related machinery at customer sites. Diagnose mechanical, electrical, and hydraulic faults and implement effective solutions. Perform scheduled preventative maintenance to reduce downtime and extend equipment life. Collaborate with customers to provide technical guidance, operational training, and support. Maintain accurate service reports including parts used, repairs completed, and recommendations. Respond promptly to service calls and troubleshoot equipment failures in a timely manner. Work closely with the Technical Manager to innovate and improve service procedures and equipment reliability. Work with manufacturers technical departments to trouble shoot issues and find resolutions. Ensure parts stock on the van is recorded and that sufficient parts are kept minimise repeat visits. Maintain good communication with all parts of the business including the sales team to ensure the highest level of customer service. Ensure hand tools and equipment used is maintained and in good condition. Ensure compliance with Health and Safety policies at all times including customer on site requirements.About you: Requirements: Certification in mechanical, electrical or industrial engineering. Ability to work independently. Strong understanding of hydraulic, pneumatic, and electrical systems. Ability to read and interpret technical schematics, manuals, and diagnostic tools. Ability to work independently, prioritise tasks and manage multiple service calls efficiently. Competence in using hand tools, power tools, and diagnostic equipment. Excellent problem-solving skills and hands-on technical aptitude. Strong communication skills to effectively liaise with clients and colleagues. 3 years' experience in a similar role.Desirable Qualifications: Certificate in mechanical, electrical or industrial engineering. Valid UK driving license and willingness to travel for site visits. Knowledge of retail, waste management, recycling, or industrial equipment sectors. Experience in fabrication, welding or preventative maintenance programs.Benefits: A company van will be provided for business use. Life Insurance with access to GP24. Commitment to wellbeing through Employee Assistance Programme. Electric Car salary sacrifice scheme for eligible employees. Cycle to work scheme. Company Events. GymFlex salary sacrifice.Please click on the APPLY button to send your CV for this role. Overseas candidates will NOT be considered for this role. We are not sponsoring Visa's at this time, so please refrain from applying unless eligible to work in the UK. Candidates with experience or relevant job titles of: Service Technician, Mechanical Maintenance Technician, Electrical Engineer, Engineer, Field Service Engineer, Electrical Maintenance Engineer, Industrial Engineer, Plant Manufacturing Engineer, Plant Fitter, Senior Plant Operator, Process Plant Operator may also be considered for this role

Project Manager – High Voltage Cables (132kV–400kV) \n 5+ positions | England & Scotland | £80,000–£90,000 + car allowance | Contract: £400-£600 per day \n The opportunity \n We are exclusively recruiting for five or more Project Manager appointments with a specialist high-voltage cable installation and jointing contractor — a long-standing framework partner to the UK's major transmission and distribution network operators, delivering schemes up to 400kV. \n The business is entering a significant growth phase, backed by a larger group with real ambition and a secure, funded pipeline of major network reinforcement work. These are the appointments being made at the start of that journey. \n Projects mobilise in August and September 2026. Our client needs people now. \n The projects \n You will take ownership of one of the following live schemes: \n / \n South East England \n Diversion of a 132kV cable circuit , removal of the existing circuit, excavation, ducting and installation of new cables \n West coast of Scotland \n Installation of four new 132kV circuits plus additional 33kV circuits \n East Anglia \n Project Manager appointment on a live 400kV cable installation \n All schemes are delivered for major UK network operators. The work is cable and civils led, excavation, ducting, new cable installation, jointing and testing through to energisation. \n What you will be doing \n\n • Taking full lifecycle ownership of HV cable schemes from 33kV to 400kV — route proving, civils, ducting, cable pulling, jointing, testing, energisation and handover\n, • Developing and maintaining the project programme, and driving recovery where required\n, • Acting as principal interface to the network operator, alongside local authority, street works, highways and landowner stakeholders\n, • Discharging CDM duties, setting site safety standards and owning the HSEQ position on your scheme\n, • Administering NEC contracts, owning budget, cost forecasting and margin performance\n, • Leading site teams, jointers, civils crews and subcontractors\n\n What we are looking for \n Essential \n\n • Minimum 10 years' experience as a Project Manager\n, • Proven HV cable delivery, 132kV and above preferred. Candidates with 20+ years at 33kV and a strong delivery record will also be considered\n, • Substation experience, including the cable-to-substation interface, terminations and energisation\n, • Demonstrable DNO and TO knowledge — operator standards, processes, authorisation regimes and safety rules\n, • Experience managing heavy civils alongside complex electrical transmission and distribution scope\n, • Working knowledge of NEC forms of contract\n, • Minimum HNC/HND in Electrical Engineering or a related technical discipline\n, • CSCS card and full UK driving licence\n, • Genuine willingness to work away where the project requires it\n\n Highly desirable \n\n • Current DNO or TO authorisations\n, • 400kV experience\n, • Cable jointing background, or close working knowledge of jointing operations\n, • NEBOSH Construction Certificate, SMSTS, CDM Principal Designer experience\n, • Offshore or subsea cable exposure\n, • APM PMQ, PRINCE2 or equivalent\n\n Location \n Our client will consider candidates based on or near the project patch, and equally candidates elsewhere in the UK who are willing to travel and work away. Travel, lodge and subsistence are supported. \n What is on offer \n\n • £80,000–£90,000 plus car allowance on a permanent basis\n, • £400–£600 per day, all-in, for contract candidates — permanent is preferred, but strong contractors will be considered\n, • A secure, funded pipeline of major schemes — not project-to-project uncertainty\n, • Work at the top of the voltage range, up to 400kV, on nationally significant network infrastructure\n, • A specialist business where HV cable delivery is the core discipline, not a side line within a general contractor\n, • Backing of a larger, growing group, with genuine progression as the business scales\n, • Free AI upskilling through Peak Intelligence for every candidate placed by embs. talent\n\n The process \n Two stages, run quickly. A technical and delivery interview with the hiring manager and Operations Director, followed by a short final conversation with the Managing Director where required. Given the August mobilisation, decisions are being made fast. \n Apply \n These roles are exclusive to embs. talent. For a confidential conversation, contact: \n Helen Charteris Practice Director – Global Power & Energy, embs. talent helen@embstalent.co.uk | 07512 540612 \n

CNC Miller Setter / Operator Location: Draycott, Derbyshire Salary: £18 - £20 per hour (depending on experience) Hours: Full-time, permanentAbout the RoleAre you an experienced CNC Miller looking to join a dynamic, innovative engineering team?We are looking for a skilled CNC Miller Setter/Operator to join our busy workshop in Draycott. In this hands-on role, you'll set and operate Haas machining centres, manufacturing high-precision, low-volume components that form part of our cutting-edge food automation systems.This is an excellent opportunity for someone who takes pride in producing quality work, enjoys a varied workload, and is motivated by continuous improvement in a modern manufacturing environment.CNC Miller Setter / Operator - Key Responsibilities Set and operate CNC machining centres (Haas)Read and interpret engineering drawingsSelf-inspect completed work using measuring equipmentRun multiple machines when appropriate to increase efficiencyProduce small batches with a right-first-time approachContribute to process improvements to support productivity and qualityCNC Miller Setter / Operator - About You - Essential: Proven experience setting and operating CNC milling machinesAbility to read and interpret technical drawingsConfident in self-inspection and quality checksCNC Miller Setter / Operator - Desirable: Knowledge of Mastercam or CAD/CAM programmingStar sliding head machine experienceWe are a leading UK manufacturer of innovative food processing and automation equipment.From our headquarters in Draycott, Derbyshire, we design and build bespoke machinery and robotic systems that help some of the world's leading food manufacturers improve efficiency, quality, and productivity. With a reputation for engineering excellence and continuous innovation, we're proud to deliver cutting-edge automation solutions to customers across the globe.You'll be joining a business that's passionate about engineering innovation and investing in its people. As part of our team, you'll work on exciting engineering projects, use modern technology, and play a key role in building bespoke machinery that makes a real impact for our customers. We take pride in the quality of our work, encourage continuous improvement, and offer a supportive environment where your skills and experience are valued.CNC Miller Setter / Operator - What We Offer Competitive hourly rate (£18-£20, depending on experience)Access to advanced CNC machines and cutting-edge toolsA supportive and friendly environment, focused on growth and developmentClear opportunities for training and upskillingCompany pension scheme28 days holiday, including bank holidaysFree on-site parkingRefer a Friend schemeOpportunity for overtimeCostco cardConvenient location near Derby and M1TPBN1_UKTJ

Position Title : Service Engineer - Electrical BiasLocation: UKReports to : Area manager / Co OrdinatorJob Purpose : Responsible for the installation, service and maintenance of GPI machinery in customer facilities. The incumbent is a key member of the Technical Service team and partners with our converting and sales teams to meet the needs of the customer.Key ResponsibilitiesConducts top-level troubleshooting, diagnosis and repair of electrical, mechanicaland controls related problems on machines installed at customer locations, including overhauls and field upgrades as necessaryParticipates in the development, processing and follow up of specifications during machinery tests, debugging and start up, as well as, during the development and field testing of new carton designsDevelops and maintains productive working relationships with customers and acts professionally and proactively to resolve equipment, cartons or service-related issuesAs the technical expert, partners with sales and converting manufacturing individuals and teams to resolve customer issues, as well as, support new business opportunities and product development projectsApplies continuous improvement concepts and techniques to increase equipment productivity.Participates in process improvement and cost reduction initiatives.Effectively utilizes IT systems (in-house and standard applications)Maintains skill base necessary and consistent with machinery and carton technologyProvides instruction and training to customers staff on safety, operations, machinery maintenance and proper carton handling proceduresPrepares service reports, modified schematics, standard operating procedures and carton specification updates to support field initiatives and changesReports on progress of projects / assignments to all internal and external stakeholdersConducts audits, evaluations and assessment of machine systems / performance resultsLiaises with other companies / OEMs working on common projectsThis is a summary of the key responsibilities of this position. The Company reserves the right to require the role-holder to undertake such additional tasks or duties as may be within their capabilities and abide by all reasonable rules and instruction given by the Company.Qualifications and Experience4 or more years of related experience and/or formal training in equipment maintenance, repair and troubleshooting. Knowledge of packaging or similar equipment is advantageousTechnical training with graduation or education of industrial or mechanical engineeringDemonstrated ability to read electrical, mechanical engineering PLC and operator interface knowledge/experience.Intermediate level of PLC expertise preferably on Siemens TIA Portal and Step 7 platform. Rockwell control Logix 5000 and Studio 5000 would be acceptable.Must be prepared to travel if required on short notice. Working hours are flexible to meet Customer demands. Some shift / out of hours working will be required as necessary.Higher level of English reading, writing and speaking skillsFull clean driving licenseKey CompetenciesEffective communicator, both orally and written, with internal and external customersSuccessfully identifies root causes and resolves problems and issuesDevelops positive customer relationships through customer-focused mindset, build trustIs a team player, works well with others inside and outside the organization?Detail-orientated and technically mindedIs a self-starter, has initiative, can effectively work independently with minimal direct supervisionEffectively manages time, plans, projects and related tasksFlexible approach to ensure timely and professional service to support customer and the internal manufacturing processContinuously meet targets and objectives, accountable for resultsTPBN1_UKTJ

Express Recruitment are once again supporting one of the fastest growing engineering firms in the UK, due to increasing global orders for their in demand bespoke machines. Due to ongoing growth and investment in their production capabilities, they are looking to recruit an experienced CNC Programmer & Operator to join their team. The successful candidate will have strong experience in working with 3-axis CNC milling machines, combined with a solid understanding of engineering drawings and GD&T, along with the capability to create, optimise and run CNC programs to tight tolerances. This role offers flexible start times between 7am – 8:30am and early Friday finish options. In return, you will receive a starting hourly rate of up to £18.12, plus a great benefits package of, 25 days annual leave + stats, 5% employee / 4% employer pension, death in service (x2 of annual salary), monthly price draws and profit share. Skills & Experience • Skilled in using CNC machine controls (Heidenhain/Siemens) and CAM software essential, • Time-served apprenticeship or HNC/HND (or equivalent) within an engineering discipline, • Understanding of machining behaviours for materials such as aluminium, steels and plastics, • Ability to read and understand precision CAD drawings, • Confident user of calibration and metrology equipment, including verniers, calipers and micrometres, • Excellent attention to detail, communication skills and the ability to work independently Roles & Responsibilities • Create, develop and optimise CNC programs from technical drawings and CAD models to produce high precision machinery components, • Program, set and operate CNC 3-axis milling machines using Siemens and Heidenhain controls, ensuring accuracy and alignment, • Conduct first-off and in-process inspections using precise measurement tools, • Troubleshoot machining issues and adjust programs, tooling or setups accordingly, • Work closely with Design Engineers to produce bespoke tooling components and complete CNC cutting lists for machine parts, • Maintain a safe, tidy work area and collaborate with production and engineering teams About Express Recruitment Express Recruitment has been offering exceptional recruitment solutions across the East Midlands since 1987, “exceeding expectations every time” of over 267,000 candidates. We supply a diverse range of sectors including Engineering, Technology, Professional Services, Languages, Sales & Marketing, Call Centres, Commercial, Manufacturing, Local Authority, NHS, Education and Voluntary organisations. Find all of our current vacancies on (url removed) Not quite found the right role for you yet? Let us do the scrolling for you! Just fill in our contact form at (url removed) or call (phone number removed). Job Location Derby, Derbyshire Salary c£18.12 per hour D.O.E Job Type and Hours Monday to Friday (Regular Days – 1pm Finish on Fridays)

Job Title: CNC Setter Operator- Milling Industry: Aerospace Location: Derby Employment: Permanent Salary: £59,787 per annum (inclusive of 33% shift) Shift: Nights Pattern: Monday - Thursday / 6pm-6am The Role - CNC Setter Operator Join our leading aerospace engineering client's team in Derby and contribute to cutting-edge precision machined component development. As a CNC Machinist (Milling), you'll play a key role in machining complex components for advanced aircraft systems, working in a collaborative and innovative environment. Due to Security restrictions, all candidates must currently hold British citizenship. Duties - CNC Setter Operator Produce accurate, high-quality components with maximum efficiency Competently set and operate CNC machines Work to tight tolerances and check your own work meets the required standard To work on your own initiative and understand all aspects of the manufacturing process Quality check all finished jobs Clean and maintain CNC machine and all associated equipment and machine area. Background - CNC Setter Operator Engineering apprenticeship OR significant experience Able to Set and Operate Milling machines. Experience of milling machines - 3 or 5 Axis Able to interpret engineering drawings Able to self-inspect work using various inspection techniques Benefits - CNC Setter Operator 25 Days Annual Leave plus Bank Holidays. (33 total) Life Assurance: 3 x annual salary 4 Day week Omega For more information on this role, please contact Lee Powell on (phone number removed) or send copy of your CV to Professional currently working as CNC Machinist, Miller Machinists, Mill Turn Machinists, CNC Turner, CNC Setter Operator, CNC Programmers or similar may be suitable. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process

Job Title: CNC Setter Operator- Milling Industry: Aerospace Location: Derby Employment: Permanent Salary: £47,200 per annum (inclusive of 40% shift) Shift: Weekend (Days) Pattern: Friday - Sunday / 6am - 6pm The Role - CNC Setter Operator Join our leading aerospace engineering client's team in Derby and contribute to cutting-edge precision machined component development. As a CNC Machinist (Milling), you'll play a key role in machining complex components for advanced aircraft systems, working in a collaborative and innovative environment. Due to Security restrictions, all candidates must currently hold British citizenship. Duties - CNC Setter Operator Produce accurate, high-quality components with maximum efficiency Competently set and operate CNC machines Work to tight tolerances and check your own work meets the required standard To work on your own initiative and understand all aspects of the manufacturing process Quality check all finished jobs Clean and maintain CNC machine and all associated equipment and machine area. Background - CNC Setter Operator Engineering apprenticeship OR significant experience Able to Set and Operate Milling machines. Experience of milling machines - 3 or 5 Axis Able to interpret engineering drawings Able to self-inspect work using various inspection techniques Benefits - CNC Setter Operator 25 Days Annual Leave plus Bank Holidays. (33 total) Life Assurance: 3 x annual salary For more information on this role, please contact Lee Powell on (phone number removed) or send copy of your CV to Professional currently working as CNC Machinist, Miller Machinists, Mill Turn Machinists, CNC Turner, CNC Setter Operator, CNC Programmers or similar may be suitable. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process

Job Title: High Level Technician (Rolling Stock) Job Location: Derby Hourly Pay Rate: Days - £22.49 PAYE / £29.23 Umbrella Afternoons £26.09 PAYE / £33.98 Umbrella Nights - £29.91 PAYE / £39.01 Umbrella Saturday - £33.74 PAYE /£40.92 Umbrella (All hours) Sunday - £44.98 PAYE /£54.56 Umbrella (All hour) Shifts: Mon - Fri Days 37 hours Duration: On-going contract Start Date: ASAP Industries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process Engineering Disciplines considered: Diesel Engine Fitter, Electrical Engineer / Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown Engineer Client Summary: A world-renowned Rolling Stock vehicle manufacturing, service and maintenance company and is the number one provider of rail solutions in the world. This prestigious company is also the largest rolling stock manufacturer and provider in the UK and employs over 70,000 employees in 60 countries worldwide. Position Summary: Reporting to the Reliability Shift Manager, as part of a small technical team, you will be required to assist the Fleet Operator to undertake / supervise primarily in the corrective mechanical and electrical maintenance, detailed fault finding and repair on the Class 701 South West Rail fleet of trains. Successful applicants will be responsible for ensuring that any maintenance undertaken at the depot is completed in accordance with the company's processes, procedures and comply with all safety regulations. This is Safety Critical environment and all tasks undertaken will need to ensure that the operator can achieve and maintain the reliability and availability targets set for the trains. The candidate will also assist the Operator when failures occur during service and resolve any issues on the network. The candidate will need to provide high level technical support to the operator which will include: High Level fault finding electrically High Level fault finding mechanically Provide train systems engineering advice for the vehicle as a whole and for the key vehicle systems (such as TCMS - train control system, HVAC, propulsion, brakes, doors, on-train communications etc.) FRACAS - Failure reporting, analysis and corrective action system Produce solutions that provide short term mitigation and long term resolution Monitoring of warranty issues and liaising with supplier technical teams Attending to faulty trains in service, component replacements and modification work Helping customer with root cause analysis using Alstom FRACAS, 8D, PPS methodologies. Ensuring correct replacement parts are sourced Assisting operator in updating of maintenance instructions, overhaul instruction, processes & procedures to optimize maintenance and liaise with Alstom Technical Publications and Central Engineering teams where required Monitoring trains reliability & availability performance and issuing monthly performance reports Monitor of trains in Service using remote monitoring system called Orbita Down load train data from onboard train data recorders using laptops Run diagnostics software to identify faults with various train systems i.e. hydraulic systems, pneumatic systems, train management systems & on board computers. System software updates as required Obsolescence avoidance and mitigation Engineering support for all safety related incidents (NIRs), including representing the Customer with respect to access to Design Authority and equipment OEM's and the production of affirmative closing actions Service Provider representation on Failure Review Boards, feeding back decisions and outputs to the Customer Share experience gained of other fleets across the world which the Service Provider has supplied and/or supports, provision of recommendations and opportunities for design improvements, standardisation and/or modifications. Contribution to Health and Safety on a daily basis. * Strong report writing skills. Qualifications: * Minimum qualification required - NVQ Level 3 in an electrical discipline. Experience required: Experience within Rail desirable Use of Laptop's and diagnostic tools to determine faults Ability to work from maintenance manuals and schematics Experience of Mechanical or Electrical fault finding Experience of Mechanical or Electrical repairs Troubleshooting and evidence gathering. Person profile: You will be a highly self-motivated individual, able to work under your own initiative You will possess excellent communication & interpersonal skills You will need extensive all-round knowledge of Mechanical Engineering You will need extensive all-round knowledge of Electrical Engineering. This could also include the following: Responsible for accurate completion of all paperwork prior to supervisor validation. Undertake technical maintenance to the required standards. Reliability monitoring reporting Data analysing Rip out and replace electrical components Rip out and replace full or part of large wiring looms Re-install wiring Test Continuity Battery Modifications Repairing or installing Wi-Fi systems * Changing relay boxes / Wiper motors If you wish to be considered for this role please send your CV including scanned copies of your qualifications and a scanned copy of your passport to (url removed) OR call (phone number removed) PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION. Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise. Please note the above job specification could be subject

FLT Driver (Team Member) - Nights Derby, Derbyshire The Company Yusen Logistics is working to become the world’s preferred supply chain logistics company. Our complete offer is designed to forge better connections between businesses, customers and communities – through innovative supply chain management, freight forwarding, warehousing and distribution services. As a company, we’re dedicated to a culture of continuous improvement, ensuring everyone who works with us is committed, connected and creative in making us the world’s preferred choice. We’re looking for enthusiastic and driven FLT Drivers to join us at our Derby site (DE65 6BG) on a permanent, full-time basis, working 22:00–06:30, Sunday to Friday morning. The Benefits • Salary of £31,667.18 per annum - Health Cash Plan - Employee Referral Scheme - Cycle to Work scheme - Critical Illness Cover - Free online Fitness Platform, i.e., Pilates & Yoga, Mindfulness/Meditation, 24/7 support, advice, diet and Nutrition - On-site Mental Health First Aiders - Employee benefits, i.e., free eye test, up to 25% off gym membership, high street vouchers - Free access to 24/7 online GP, mental health support service, Life Events Counselling, Care Concierge Service - Tailored development and career opportunities This is a terrific opportunity for experienced warehouse professionals with a valid FLT counterbalance licence and strong attention to detail to join our forward-thinking organisation. You’ll have the chance to build on your existing warehouse experience within a busy night operation, working as part of a supportive team and developing your skills across a broad range of warehouse activities. What’s more, you’ll join a global logistics business that invests in its people through tailored development and career opportunities, alongside extensive health, wellbeing and lifestyle support. So, if you’re ready to put your FLT experience to work in a stable night role and become part of a team that keeps goods moving, read on and apply today. The Role As an FLT Driver, you will help keep our Derby warehouse running smoothly by supporting the safe movement, storage and dispatch of goods. Operating a forklift truck, you will load and unload LGV vehicles, pick stock and prepare products for dispatch. You will also support general warehouse activities, including receiving goods, replenishment, palletising and manual handling tasks. Additionally, you will: • Complete loading and unloading paperwork for audit purposes - Carry out equipment checks and report any defects - Follow all health and safety procedures, including PPE requirements - Report any issues or concerns to your line manager About You To be considered as an FLT Driver, you will need: • Previous warehouse experience and experience of manual handling - An FLT counterbalance licence (with a minimum of 12 months’ experience) - The ability to work as part of a team - Attention to detail Please note, this role involves regular manual handling, including lifting, carrying and bending throughout the shift. Full training and appropriate equipment will be provided to help you work safely and effectively. The closing date for this role is 28th August 2026. We thank all applicants for their interest, however, only those under consideration will be contacted. Please note, applicants must have the legal right to work in the UK, as we are unable to offer visa sponsorship for this position. At Yusen Logistics, we understand the value of utilising AI and other technologies to support the application process, but we encourage candidates to use them to enhance their application and not replace their own effort and authenticity. Therefore, candidates should not rely on AI-generated responses during the interview process. Yusen Logistics is an equal opportunities employer, who encourages applications from all suitably qualified and eligible applicants regardless of their personal circumstances. We make our recruiting decisions solely based on skillset and experience. Diversity allows us to create an inclusive environment, where our employees can strive and grow their potential. Yusen Logistics are proud to be a ‘Disability Confident Committed’ employer. Other organisations may call this role Warehouse Operative, Forklift Truck Driver, Counterbalance FLT Driver, Reach Truck Operator, or Counterbalance Operator. So, if you’re looking for a new role as an FLT Driver, please apply via the button shown. This vacancy is being advertised by Webrecruit. The services advertised by Webrecruit are those of an Employment Agency

Are you an experienced CNC Machinist looking for your next opportunity? Our client, a leading aerospace precision manufacturer, is looking to recruit a skilled CNC Machinist to join their Derby-based team. This role involves setting and operating 3-axis and 5-axis CNC milling machines to manufacture high-precision components to exacting quality standards within a regulated aerospace environment. The ideal candidate will be a time-served CNC Setter/Operator with experience in precision machining, strong attention to detail, and the ability to work independently whilst maintaining high standards of quality and safety. Experience within aerospace manufacturing and familiarity with ISO-accredited environments would be highly advantageous. CNC Machinist Permanent Competitive Salary – Dependent on Experience Derby Monday - Thursday 6am - 6pm CNC Machinist Job Description • Set and operate 3-axis and 5-axis CNC milling machines to manufacture precision components. • Produce accurate, high-quality components while maximising efficiency and productivity. • Interpret engineering drawings and manufacture components to tight tolerances. • Inspect and quality check finished components using a variety of measuring equipment. • Set up and maintain CNC machines, tooling, fixtures, and associated equipment. • Work independently and as part of a team to meet production targets. • Ensure all work is completed in line with ISO 9001, ISO 14001, ISO 45001 and ISO 50001 standards. • Maintain excellent housekeeping and safe working practices within the machining area. • Support continuous improvement initiatives relating to quality, safety, environmental performance, sustainability, and energy efficiency. CNC Machinist Essential Experience/Skills/Qualifications • Fully skilled, time-served CNC Setter/Operator (certificates required). • Experience setting and operating CNC milling machines, including 3-axis and 5-axis machining. • Ability to read and interpret engineering drawings. • Experience working to tight tolerances and producing high-precision components. • Competent in the use of a wide range of measuring and inspection equipment. • Previous experience within an aerospace manufacturing environment. • Computer literate with strong practical engineering skills. • Excellent attention to detail and commitment to quality. • Ability to work independently and as part of a team. • Strong understanding of health and safety requirements within a manufacturing environment. • Good hand-eye coordination and normal colour vision. CNC Machinist Company Benefits • Competitive salary package. • Ongoing training and development opportunities. • Structured annual appraisal and performance review process. • Opportunity to work within a leading aerospace manufacturing environment. • Supportive team culture focused on safety, quality, delivery, cost improvement, and people development. • Career progression opportunities within a growing business. If you feel you're a good fit for this position, please click 'apply

Job Title: Metrology Engineer Location: Blackburn, Lancashire or Derby, Derbyshire Salary: £50,000pa Hours of work: day shift Monday - Thursday 08:00-17:00 / Friday 8:00-13:00 Job Type: Full-time, Permanent, Hybrid Role AMLR are looking for an experienced Metrology / CMM Engineer who will lead the evaluation, optimisation, and standardisation of measurement methodologies. Initially focusing on CMM (Coordinate Measuring Machine) activities, the role will identify inefficiencies in current programs, measurement frequency, equipment utilisation, and processes. Key responsibilities for Metrology / CMM Engineer: Review current measurement methodologies, with emphasis on: • CMM program structure and content, • Measurement frequency and justification, • Equipment capability, utilisation, and bottlenecks, • Software versions, compatibility, and programming methods, • Conduct site visits to assess local processes and competence., • Perform gap analysis against industry best practices and OEM requirements., • Recommended inspection plans and measurement frequencies, • Software standardisation and upgrade roadmap, • CMM equipment investment plan (rationalisation, upgrades, replacements), • Reduce over processing through optimised CMM cycles, routines, and probing strategies., • Introduce methods to minimise operator intervention and reduce variability., • Identify opportunities to improve throughput (fixturing, offline programming, macros etc.)., • Drive consistent reporting structures, including FAIRs, in process measurement, capability studies and SPC. Requirements for Metrology / CMM Engineer: • Experienced user of PC‑DMIS, • Proven experience as a CMM Programmer/Engineer in the aerospace or precision engineering sector., • Proficiency in CMM programming languages/software, primarily PC-DMIS, • Good understanding of GD&T, engineering drawings, tolerances, and complex geometry., • Knowledge of probing systems, fixtures, and offline programming tools., • Strong analytical skills, including measurement system analysis (MSA), capability studies, SPC., • Experience implementing or contributing to metrology strategies at multi-site organisations., • Exposure to automated inspection systems, laser scanners, CT, or non-contact metrology., • Experience building standardised work and quality frameworks., • Knowledge of lean manufacturing and continuous improvement., • HNC/HND or Degree in Mechanical Engineering, Manufacturing, Aerospace Engineering, or related field., • Metrology/CMM programming certification is advantageous. Benefits for the Metrology / CMM Engineer : • Opportunity to work within a leading aerospace manufacturing environment., • Career development and progression opportunities., • Ongoing training and skill development., • Friendly and supportive team environment. If you are proactive, quality-driven, and ready to take the next step in your career, apply now or submit your most up-to-date CV to j . reid @ amlr. uk or to discuss how we can find you your next move within your chosen sector with one of the many career opportunities we currently have, Tel: (phone number removed) and ask for Jane

Job Title: CNC Setter Operator- Milling Industry: Aerospace Location: Derby Employment: Permanent Salary: £48,998 per annum Shift: Days Pattern: Monday - Thursday / 6am - 6pm The Role - CNC Setter Operator Join our leading aerospace engineering client's team in Derby and contribute to cutting-edge precision machined component development. As a CNC Machinist (Milling), you'll play a key role in machining complex components for advanced aircraft systems, working in a collaborative and innovative environment. Due to Security restrictions, all candidates must currently hold British citizenship. Duties - CNC Setter Operator Produce accurate, high-quality components with maximum efficiency Competently set and operate CNC machines Work to tight tolerances and check your own work meets the required standard To work on your own initiative and understand all aspects of the manufacturing process Quality check all finished jobs Clean and maintain CNC machine and all associated equipment and machine area. Background - CNC Setter Operator Engineering apprenticeship OR significant experience Able to Set and Operate Milling machines. Experience of milling machines - 3 or 5 Axis Able to interpret engineering drawings Able to self-inspect work using various inspection techniques Benefits - CNC Setter Operator 25 Days Annual Leave plus Bank Holidays. (33 total) Life Assurance: 3 x annual salary 4 Day week Omega For more information on this role, please contact Lee Powell on (phone number removed) or send copy of your CV to Professional currently working as CNC Setter, Skilled Machinist, CNC Machinist, Miller Machinists, Mill Turn Machinists, CNC Turner, CNC Setter Operator, CNC Programmers or similar may be suitable. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process

A global manufacturer of advanced materials is seeking a Process Operator in the United Kingdom to follow process instructions and manufacture quality products. Ideal candidates will have experience in a processing plant, strong communication skills, and a commitment to safety.

Process Operator needed in Selby to work with chemicals and follow process sheets. Requires experience in process environments and handling chemicals.

Knowledge of cleaning methods and processes.

As a Machine Operator(Press Brake, CNC Router and Laser) you will load raw materials and set the machinery prior to operation.

Our client is expanding! They’re looking for skilled Machine Operatives with highways experience, excavator operation expertise, and tree work knowledge to join their growing team.If you take pride in working outdoors, maintaining green spaces, and supporting the UK’s infrastructure, this is the

Operate a 360 machine to feed materials into a shredder, perform maintenance, and manage waste on-site.Requires daily checks and cleaning of equipment.

Cyber Security Project Manager (Contract).Contract: £450 per day Outside IR35.Remote working (Occasional travel).We are looking for an experienced Cyber Security Project Manager to join a leading telecommunications organisation, helping to shape and drive the delivery of key cyber security initiati

The ideal candidate will have proven experience managing complex EPR implementation projects, with a strong understanding of EPMA (Electronic Prescribing & Medicines Administration) and the clinical processes surrounding medicines management. Highly process-driven, structured and delivery-focused. I

Our client is a premium health, racquets and lifestyle club operator, running some of the most impressive facilities in Australia.

Interim commercial technology counsel (remote) - 4 Days Per Week.MLA is working on an exciting interim Legal Counsel opportunity with a fast-growing, publicly listed technology business operating at the intersection of sports data, digital markets and fintech.The organisation provides critical data

Clear processes designed for consistency and quality. The firm’s systems and processes are designed to minimise repetitive admin and maximise your ability to focus on legal work and client communication.

Strong understanding of finance and accounting processes. Hands-on NetSuite expertise, including configuration, process design, reporting, and user support. Review existing NetSuite environments and identify opportunities for process improvement and standardisation.

Remote Senior Residential Conveyancer.A Firm That Puts Its People First.What if you could take the next step in your conveyancing career without sacrificing flexibility, support, or the quality of service you deliver?.We're partnering with a well-established national law firm that has successfully c

DV Cleared Data Scientist / Machine Learning Consultant.Join one of the UK's leading Defence & Security practices, working on high impact programmes that support national security and help government organisations unlock value from data, AI and machine learning.You will work alongside clients to sol

Cyber Security Consultant – Zero Trust.We're looking for a Cyber Security Consultant to join a leading global technology and consulting organisation, working on large-scale security transformation programmes for major clients.This is an excellent opportunity for someone with up to 2 years' experie

Process requests, orders and account updates.

Remote Air Freight Logistics Partner | Chinese Speaker Based in UK/EU.Company: OPTEC EXPRESS (HK) LIMITED We’re expanding our global air logistics network and actively searching for a long-term remote independent contractor based in the UK or Europe to support our cross-border air freight operatio

Providing a high standard of customer service while working within insurance processes and regulations. Identifying opportunities to improve the customer journey and team processes.

Synergize is one of the UK's leading specialists in building safety, decarbonisation, refurbishment and planned maintenance, delivering high-quality projects across both the public and private sectors.Since 2004, we've built our reputation on delivering complex programmes safely, efficiently and to

NOCN Group are seeking a freelance End Point Assessor with significant experience of Professional Coaching (Business, Performance, Leadership, Career) to help carry out End Point Assessments for the Coaching Professional apprenticeship Standard.The roles are flexible and freelance and usually carrie

Madrid OR Barcelona OR Prague OR Remote.Our client is a global technology leader delivering mission-critical solutions to the air transport.Their products connect airlines, airports, aircraft and governments, enabling secure, reliable and innovative digital operations worldwide.They are seeking an e

Our Legal 500 and Chambers-ranked client is seeking a Private Family Solicitor (4+ years' PQE) with strong financial remedy experience to join its growing Family team.This is an excellent opportunity to join a highly regarded, supportive firm, offering high-quality work, genuine autonomy and a colla

Reporting to store managers we’ll need you to remain relevant with the latest trends and be the driving force behind delivering a “first-class” experience.You’ll be the ultimate brand ambassador and our clients will be your primary focus.You’ll inspire confidence whilst actively listen to

Confidence documenting processes and producing process maps that people actually use. Identifying and prioritising client processes suitable for automation, and mapping them where the documentation doesn't already exist. Running requirements gathering, process mapping and stakeholder workshops.

By submitting your application, you consent to Grant Thornton International collecting and processing your personal data for recruitment purposes in accordance with the General Data Protection Regulation (GDPR). Strategic and Process Improvement. Perform root cause analysis to determine whether issu

TAG is actively recruiting for Retirement Consulting Actuaries, as our client has a range of exciting openings across their highly successful Retirement Consulting team.Our client, a multi-national consulting and broking business who work with some of the largest clients in the UK, are seeking talen

Identifying areas for improvement in modelling processes and methodologies, ensuring models are within our risk appetite. We won't ask for payment or personal financial information during the hiring process. By submitting this application, I agree that my personal data will be processed in accordanc

Engaging in settlement negotiations and ADR processes.

Dealer Project Manager – Global Automotive Software & Technology.Hybrid working with extensive UK travel, plus 25 days holiday and a strong benefits package.This is a delivery-led role for someone who enjoys being close to customers and seeing projects through from first conversation to successful

Surrey 📍 Salary from £40,000+ depending on experience | 1 day WFH.Hunter Dunning is working with a leading high-end interior design studio on a Mid Weight Interior Architect job in Surrey.You will support luxury residential interiors for private clients and developers across the UK and internati

Manage motor reinsurance claims through the London Market using ECF, CMS and ODM systems, ensuring accurate claim transaction processing and policy validation. Process cash calls and claim payments in accordance with London Market practices, contractual obligations and internal procedures. London Ma

Enjoy a career where you are in FULL control of your working schedule and volume of caseload while taking up to 75% of your billing.Burgh Thorpe Solicitors are looking to support legal professionals in working towards a different way of working.We are a forward-thinking firm that is known for provid

Chubby Bear is an exciting, start-up with a small but highly driven team.We specialise in creating tailored direct-to-consumer campaigns designed around each brand’s individual identity.Our mission is to help brands enter and grow within the DTC space while minimising risk and maximising results.F

Please note that this role will require Security Clearance including an enhanced Disclosure and Barring Service (DBS) check as part of our recruitment process.

You'll run our outbound feedback sequences and handle responses, working with an LLM-assisted tool to process and log data efficiently.