Trabajos manufacturing supervisor en BirminghamCrear alertas

Job title: Machine Shop SupervisorContract: PermanentSalary: To be discussed on initial callWorking hours: Monday Friday (6:00am 14:00pm)Next Generation are proud to have been appointed to recruit for a Machine Shop Supervisor to work with a well-established engineering company based near Halesowen. As the Machine Shop Supervisor you will be responsible for helping the business achieve daily production targets whilst quality is maintained at all times whilst optimizing machining efficiencies.Duties of the Machine Shop Supervisor:Planning &organization of works orders &labour within the department to achieve agreed daily O.T.D.& recoveries; ensuring production time is fully utilized &productivity maximized - Ensure timesheets are completed & bookedParts are produced in accordance with approved quality standards, procedures &process techniques as defined by the route cards & drawingsEnsuring that standard working practices are followed on all operations in terms of Workflow, WIP quantities, process/cycle times and procedures.Continually monitors existing production techniques/methods &where identified implements improvements or alterations via the correct procedures.Monitors, analyses &orders department consumable stock levelsLiaise with Maintenance on breakdowns, P/M's &W/O's of equipment to minimise downtime & maximise machine availability.The successful candidate for the Machine Shop Supervisors position will have the following experience:3 5 years experience as Supervisor / Team Leader within a machining environment (Milling and turning) (Essential)Hands on machining experienced (Desirable)Ability to read and understand engineering drawings (Essential)Experience working within heavy engineering (Desirable)Due to the high number of applications we receive, we are sometimes not able to respond directly to each candidate. If you havent been contacted within 14 days of your application, unfortunately you have been unsuccessful on this occasion.By applying for this role your details will be submitted to Next Generation and the relevant client related to this vacancy.Next Generation work in partnership with businesses across the UK who operate within Manufacturing, Logistics & Commercial sectors. We provide permanent and contract opportunities engaging with talented candidates looking to make their next career move.TPBN1_UKTJ

Electrical Maintenance SupervisorSalary: Up to £57,500 DOELocation: DudleyHours: Monday to Friday, 8:00am - 4:30pmOur client, a well-established and respected manufacturing business, is looking to appoint an experienced Electrical Maintenance Supervisor. This is an excellent opportunity for a hands-on engineer with supervisory experience to join a successful business offering a competitive salary and excellent work-life balance.The RoleReporting into the Engineering Manager, you will be responsible for supervising a small team of engineers, ensuring the safe and efficient maintenance of the site's production equipment and facilities.Your responsibilities will include:Leading and supporting the electrical maintenance team on a day-to-day basis.Carrying out electrical maintenance across site facilities, equipment and manufacturing machinery.Ensuring PPM and TPM schedules are completed while responding quickly and effectively to breakdowns.Reading and interpreting electrical schematics and panel drawings to diagnose faults.PLC fault finding.Supporting the installation, commissioning and continuous improvement of new plant and machinery.Driving high standards of safety, reliability and engineering performance across the department.About YouOur client is looking for someone who has:Previous electrical maintenance experience within a heavy industrial or manufacturing environment.A recognised Electrical qualification (Level 3 or above).Strong PLC fault-finding skills.Previous experience leading or supervising an engineering team.Excellent problem-solving skills and a proactive approach to maintenance.What's on OfferSalary up to £57,500 , depending on experience.Monday to Friday days role - 8:00am to 4:30pm .33 days annual leave , including bank holidays.The opportunity to join a secure, well-invested manufacturing business with genuine long-term career prospects.ApplyPlease send your CV via the Apply now option on the websiteIf you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touchThis vacancy is being advertised on behalf of gap technical who are operating as an employment agency.gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job.Closing Date: 27/08/2026'By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy.'TPBN1_UKTJ

Salary circa £37,500 | 33 Days Holiday | Generous Pension | Shift Pattern | Healthcare Scheme \n \n A Production Supervisor opportunity has arisen within a well-established manufacturing business operating within the engineering and industrial sectors. Reporting to the Production Manager, you'll lead daily manufacturing operations, ensuring production targets, quality standards and health & safety requirements are consistently achieved while driving continuous improvement across the shop floor. \n \n Production Supervisor responsibilities include - \n\n • Leading, motivating and developing Production Operatives across multiple manufacturing processes.\n, • Coordinating daily production activities to achieve safety, quality and delivery targets.\n, • Monitoring production performance, identifying issues and implementing corrective actions.\n, • Driving Lean Manufacturing, continuous improvement and 5S initiatives across the shop floor.\n, • Ensuring compliance with ISO 9001 quality standards and maintaining a right-first-time culture.\n, • Supporting training, coaching and performance development while promoting a safe working environment.\n\n Production Supervisor desirable skills and experience - \n\n • Previous supervisory, Team Leader or Senior Production experience within a manufacturing environment.\n, • Experience leading production teams to achieve quality, safety and delivery targets.\n, • Knowledge of Lean Manufacturing, continuous improvement and 5S principles.\n, • Experience working within an ISO 9001 manufacturing environment.\n, • A proactive, hands-on leadership style with strong communication and problem-solving skills.\n\n Production Supervisor benefits include - \n\n • Salary circa £37,500.\n, • Generous employer pension contribution.\n, • 33 days annual leave including bank holidays.\n, • Healthcare scheme.\n, • Shift-based working pattern.\n, • Long-term career development within a well-established manufacturing business.\n\n This role would suit an experienced Production Supervisor, Manufacturing Team Leader or Senior Production Operative looking to progress into a hands-on leadership position within a well-established manufacturing business. \n \n If you're an experienced Production Supervisor, Manufacturing Team Leader or Production Team Leader seeking your next opportunity within a manufacturing environment, apply now via the link in this Production Supervisor advert. \n \n Keywords: \n \n Production Supervisor, Manufacturing Supervisor, Production Team Leader, Manufacturing Team Leader, Shift Supervisor, Production Leader, Senior Production Operative, Lean Manufacturing, Continuous Improvement, 5S, ISO 9001, Shop Floor Supervisor, Manufacturing, Engineering, Industrial Manufacturing, Team Leadership. \n ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity.

An established manufacturer are seeking to recruit an experienced Quality Lead following a reorganisation and planned expansion into larger premises. Backed by a major engineering group , you will be joining a business who are investing heavily in their facilities and have a strong & secure order book. Senior Quality Engineer / Lead Salary: up to £50,000 Location: Birmingham Our client is currently a medium size manufacturer of precision CNC machined components for the aerospace market who, under new ownership, are moving to new modern facilities and investing in new advanced production machinery to fulfil new orders. To facilitate this expansion a Senior Quality professional is sought to lead the quality assurance and quality management function and staff. Duties: o Lead and organise the production focused Quality team o Main contact for all in-production quality issues and questions o Monitor and report key quality measures (e.g. defects, non-conformances) and drive corrective and preventive actions using root cause analysis o Ensure drawings, specifications and customer requirements are followed, including through regular product & process audits. o Lead problem solving and RCA to control and close out non-conformances o Work closely with Operations, Supplier Quality and Project Quality to resolve issues and keep product flowing on time, to the right quality and cost o Support internal and external audits and help maintain EN9100 / AS9100 and other approvals o Coach, mentor and develop team members and wider operations staff in good quality practices. Experience: Applications are sought from Senior Quality professionals – Quality Manager, Quality Supervisor, Quality Lead or Senior Quality Engineer – who can demonstrate a good balance of hands on production problems solving skills, strong quality toolbox plus experience leading and mentoring Quality Engineers, Technicians & Inspectors. o Proven track record of success in a complex / precision engineering/ manufacturing facility producing parts for Aerospace, Defence or Oil & Gas sectors o Strong problem-solving skills with experience of root cause analysis, corrective action and tools such as PFMEA, PPAP/ APQP, Control Plans, First Article Inspection o AS/EN9100 quality management systems maintenance and auditing o Confident communicator who can set expectations, delegate, challenge and support others. o Continuous improvement mindset, always looking for better ways of working and encouraging ideas from the shop floor The opportunity: This a great opportunity for an experience Senior Quality Engineer or Quality Manager who is looking to grow and develop their career with an expanding business who have solid relationships and contracts with major aerospace clients and are moving into larger modern factory late 2026. There is a role here that will provide a great deal of variety and will need a strong Quality Leader with good communication skills, good organisational skills and a strong Quality Toolbox. Apply on-line or call Robert Wigley for a confidential discussion (url removed) Technical Network Recruitment – Search & Selection for mid to senior level appointments for engineering & manufacturing sectors- automotive, aerospace, defence, advanced materials, capital equipment & automation

About us:At Thrislington Cubicles, we've been crafting the worlds best toilet cubicles from our UK-based factory since the 1960s. With over 50 years of experience, weve developed a reputation for delivering precision-engineered, hand-finished products that are custom-built for each individual space, like a Savile Row suit, made to measure and built to last. Many of our team members have been with us for decades, and their expertise drives the quality were known for.We are proud to be part of Bobrick Washroom Equipment Inc, a global leader in commercial washroom solutions. As part of the Bobrick family, we combine the strength and stability of a global organisation with the craftsmanship and service of a proudly British manufacturer.Our products are tested rigorously before launch, allowing us to offer an industry-leading warranty and an outstanding after-sales service. Unlike many in our sector, we dont just manufacture, we supply, install, and support projects worldwide to ensure every installation looks as good as it was designed.Summary:The CAD Technicians provide a detailed washroom layout drafting service for customer orders using 2D & 3D software applications. Provide manufacturing drawings, with hardware pick lists, for manufacturing, warehouse, and installation purposes. All functions must be performed in accordance with established company policies and procedures.Essential duties and responsibilities include the following:Prepares accurate washroom drawings from architectural plans.Creates drawings by utilizing AutoCAD 2D or Inventor 3D software.Creates material cut lists based on released project area, room phase or level.Print manufacturing drawings for the installation team (Deeside Supply and Fix orders).Designs and draws custom details in coordination with Technical Manager/Supervisor, as required.Maintains all network stored project information within the Enterprise structure.Create remedial and additional material requests in accordance with department processes.Forward any non-drafting queries to the relevant person or department.Develop and maintain a working knowledge of design-drafting standards and practices. Must have the ability to interpret notes, sketches, specifications, architectural blueprints into manufacturing drawings for installation purposes. Develop drawings with appropriate design criteria and DDA/ADA requirements with minimal supervision.Produce O&M manual's.Participate and submit new and improved work methods in alignment with the Suggested Method Improvement program.Follow and promote safe work practices.Report all hazards, unsafe acts and conditions immediately to your manager.Maintain good housekeeping practices and always follow health and safety protocols.Wears proper PPE as required.Complete other duties as assigned.Qualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily and independently. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.Education and/or experience:Relevant design-based degree preferable but not necessarily or 2-5 years industry experience within a CAD role.Basic working knowledge of Autodesk AutoCAD and/ or Inventor.Intermediate Microsoft Office skillsStrong decision-making skillsDemonstrated ability to multitask and work in a fast-paced production environment.Demonstrate a high level of attention to detail.Strong interpersonal skills and the ability to work effectively and in a team environment.Excellent organizational, time management and documentation skillsAdaptable, flexible and open to change.Must be able to identify and resolve problems using sound judgement and analytical skills.Company Benefits:33 days (25 days including 5 for Christmas shutdown, plus 8 bank holidays)Company matched pension upto 5%Company bonusDental SchemePrivate Medical InsuranceService recognition programWhy Join Bobrick/Thrislington?Youll enjoy the stability of a long-established company combined with the growth opportunities of a global leader. We offer a supportive and inclusive culture, competitive benefits, and the chance to contribute to sustainable solutions that make a difference worldwide. If youre seeking a career where you can make an impact, grow your skills and contribute to a company built on innovation, integrity, and sustainability, Bobrick/Thrislington is the place for you. Together, were shaping the future of washroom design, one project at a time.Legacy & Leadership Over 100 years as a global leader in washroom solutions.Purpose-Driven Impact Products that improve hygiene, accessibility & sustainability worldwide.Growth Opportunities Training, mentorship & career advancement.Inclusive Culture Collaborative, respectful, and diverse workplaceSustainability Commitment Supporting green building and environmental stewardship.Stability with Reach Privately held, established brand with international presence.Bobricks/Thrislingtons CultureWe view our culture as a competitive advantage and a foundation for continued success. Our positive and supportive culture encourages our people to do their best work every day. Bobrick/Koala respects work-life balance, has a strong commitment to employee development and attributes its success to five core values and their alignment with its employees, suppliers, sales representatives, distributors and other channel partners. We are dedicated to:Do the right thing: Conduct all aspects of business honestly, ethically, and responsibly.Offer the best value: Provide products and services which best meet each customer's needs.Treat everyone with dignity and respect. Embrace all backgrounds and experiences, promote equity, and be inclusive. Help each employee develop and achieve their potential.Foster a fearless and trusting culture.Continuously improve everything we do.No terminology in this advert is intended to discriminate on the grounds of age, gender, race, colour, religion, disability or sexual orientation, and we are pleased to accept applications from all sections of the community. Any qualifications listed are indicative and we confirm that we are willing to accept applications from people holding equivalent qualifications.TPBN1_UKTJ

Injection Moulding Technician.In this role you will set up and run moulding production orders using existing set programs, monitoring quality output throughout the shift. You will be passionate in achieving Right First Time and Just in Time manufacture of plastic components using advanced Moulding techniques, working with and to standard work instructions and practices.Reporting to:Technical Manager.Salary:£16.50 phHours:Rotating Shifts 6-2 & 2-10. With cover on nights if requiredWith 4:30am startup on Mondays when covering early shift.This attracts a £3.00ph Night Shift premium.ResponsibilitiesTo take responsibility for the setting and conditioning of injection mould tools in order to satisfy production orders.Attending to alarms and faults, employing permanent corrective actions.Ensuring the quality of production, controlling processing parameters against industry standards and in line with the costed requirements of the product.Routine maintenance and fault finding of injection moulding machines. Basic electrical knowledge.Routine maintenance and fault finding of injection moulding tooling.Maintain accurate records of all work undertaken for traceability.To supervise staff on shift to manage break cover etc.only when then Supervisor is not on shift.To be responsible for preparation of auxiliary equipment, jigs, fixtures, and assembly machines to ensure production requirements are met.Carry out quality checks in line with company standards.To utilise and update the electronic production monitoring system (Blackbird).To be able to identify quality problems and carry out first line trouble shooting techniques.Handling material safely and accurately to/ from store locations and machine side.Ensure stock is accurately counted and booked when moved to and from locations using company systems.You will also be trained in the processing and optimisation of new tooling, to support the business growth and Engineering Project Department.To operate safely the forklift truck (*only when fully licenced)Additional responsibilities and requirements as and when necessary.Attend all training programmes required by the company.RequirementsYou must have at least three years experience as a qualified Injection Moulding Technician.You should have a high level of mechanical aptitude and problem-solving skills together with an innovative outlook.Working knowledge and experience of business systems such as Microsoft Dynamics.IMT Level 2 and IMT Level 3.Qualification.An appreciation of the Lean manufacturing fundamentals.Effective communication and decision-making skills.Strong attention to detail.Have a continuous improvement approach to work.Knowledge of tool trials and process optimisation.Benefits:Company pensionOn-site parkingGenerous holidayBespoke training programme.TPBN1_UKTJ

MachinistLocation : Dudley, DY1 4DASalary: Competitive, DOE + Excellent Benefits!Contract: Full time, PermanentCompany Benefits : 5% Matched Pension, Holidays, 25 plus bank holidays, Life Assurance, Cycle to work scheme, Cash health care scheme - Paycare, Birthday Vouchers, Employee Assistant Programme, Branded Uniform, Free parking and Free tea & coffee!Join Hayley 24/7 EngineeringAt Hayley 24/7 Engineering, we pride ourselves on being a fast and effective provider of mechanical engineering solutions to customers across all industry sectors.Due to continued growth, we are looking for an experienced Machinist with a strong turning background to join our busy and expanding Machine Shop team in Dudley.This is an excellent opportunity for a skilled engineer who enjoys working with precision components, solving technical challenges, and contributing to a high-quality manufacturing environment.As our Machinist you will be reporting to the Machine Shop Supervisor, you will be responsible for producing high-quality machined components from raw materials using a variety of machining processes.The successful candidate will have experience setting up, operating, programming and proving CNC machinery, with particular emphasis on turning operations.Experience with ProtoTRAK XYZ and Siemens controls is highly desirable.As our Machinist you will:Interpret engineering drawings, technical specifications and CNC programmes.Set up, operate and adjust machine tools to produce components to specification.Create, prove and edit CNC programmes where required.Measure and inspect completed components using appropriate measuring equipment.Make adjustments to machinery and programmes to ensure quality standards are met.Work independently with minimal supervision while maintaining high levels of accuracy.Support workshop activities relating to quality, health & safety and environmental standards.Identify opportunities for continuous improvement and assist in solving engineering and manufacturing challenges.Ensure all relevant documentation, drawings and quality records are completed and maintained.About YouWe're looking for a motivated machinist who can demonstrate:Proven machining experience with a strong bias towards turning.Experience working with CNC machine tools.Ability to read and interpret engineering drawings and technical documentation.Strong understanding of machining principles including speeds, feeds, angles, tapers and material removal.Experience using precision measuring and inspection equipment.Knowledge of common engineering materials and their machining characteristics.Ability to work from instruction as well as using your own initiative.Strong attention to detail and commitment to quality.It would be great if you had:Experience using ProtoTRAK XYZ controls.Experience with Siemens-controlled machinery.Health & Safety, Quality or Environmental training.Engineering qualification, apprenticeship or related manufacturing background.Apply TodayIf you're an experienced machinist with CNC turning expertise and are looking to join a respected engineering business where your skills will be valued, we'd love to hear from you.Apply now and become part of the Hayley 24/7 Engineering team in Dudley!TPBN1_UKTJ

Job Title: Maintenance Engineer (nights) Maintenance EngineerLocation: EveshamSalary:Up to £58,000 for NIGHTSShift Pattern: Panama (Nights4 on 4 off)As a Maintenance Engineer, you will be responsible for maintaining and improving production machinery, ensuring maximum uptime and efficiency across the site. Working closely with the Engineering Supervisor and production teams, you will play a key role in delivering proactive and reactive maintenance support.Key Responsibilities for this Maintenance Engineer Role:Carry out planned preventative maintenance (PPM), fault finding, and repairs on production equipmentDiagnose electrical and mechanical faults and implement effective solutionsSupport continuous improvement initiatives to enhance equipment reliability and performanceAssist with installation, upgrades, and project work across the siteEnsure all work is completed in line with health & safety and company proceduresLiaise with production and engineering teams to minimise downtimeSupervise contractors and ensure compliance with site standardsReport recurring faults and recommend improvementsRequirements for this Maintenance Engineer Role:Electrically biased with strong mechanical understandingExperience within a manufacturing or production environmentBasic PLC fault-finding knowledge preferredStrong problem-solving skills and a proactive mindsetFlexible and reliable, with the ability to work Panama-style shiftsComfortable working in a chilled environmentClick Apply, or contact Saffron Giddings-01296737349Thank you for your application. Due to the volume of applications, we cannot respond to everyone personally. If you haven't heard back within 5 working days, please assume your application has been unsuccessful. To view other vacancies, please visit our website.Ref: INDMIDTPBN1_UKTJ

Role: Field Service EngineerLocation: MidlandsSalary: £43,00 - £50,000 + overtime + company vehiclePosition DescriptionBased from home and working throughout the Midlands, the Field Service Engineer (Mechatronic) is responsible for providing on site and remote support for the range of company products on which they have been trained.ResponsibilitiesResponsible for Installing, investigating and repairing machine faults of bothElectrical and a Mechanical nature assigned by the CSC (Customer Support Centre)Plan and prepare the correct parts/equipment and resource needed for repairs assigned to you in a timely manner.Ensure clear communication of escalations/ problems / concerns or delays to the CSC / Supervisor / Customer and follow up with a report if required.To assist customers and internal staff with the identification of spare parts.Customer facing – clear communication to customer both verbal and written – take ownership of faults / calls assigned to youDemonstrate flexibility with start and finish times and cross skillingProvide Helpdesk / Telephone / Remote support when required.Observe Health and Safety & Working time regulations. To follow and Adhere to the Company handbook and company policy and procedures.SkillsA wide range of electrical, mechanical and computer-based engineering skills.Experience of working on commercial equipment within a production environment alone and as part of a team is required.Consistently displaying a positive attitude towards customer service is a necessity, as is the ability to work within a close team, whilst displaying the necessary individual initiative required to achieve and maintain service targets and KPI's.Good communication, IT and customer liaison skills are essential to this role.For further details, please contact Nick Sollis – 01453 829767 or email your cvOmega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors.We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few.Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process.TPBN1_UKTJ

Line Supervisor \n Location: Birmingham - Onsite at Walkers Chocolates HQ Salary: £13 per hour + Overtime rates Contract: Full-time | Permanent Hours: Monday-Thursday (7am-7pm) & Possible Night Shift (£15 per hour) \n Lead Production Performance in a Fast-Paced Manufacturing Environment \n Walkers Chocolates is looking for a proactive and people-focused Line Supervisor to join our Manufacturing team in Birming... \n \n \n \n \n \n \n \n ZIPC1_UKTJ

We are currently seeking an experienced Engineering Maintenance Team Leader to join my clients manufacturing plant based in the area of Aldridge. This is an exciting opportunity to work in a cutting-edge environment with a company that values its employees and offers exceptional benefits, including a pension match up to 10%, overtime opportunities, and training for ILM & IOSH.The company has recently completed a multi-million Capex investment, resulting in new production lines and improved efficiencies, making this the perfect time to join a forward-thinking, market-leading organisation. As an international manufacturer, the company is committed to investing in its people, providing extensive training and opportunities for career progression.What's in it for you as Engineering Maintenance Team Leader:Basic salary of £57,200+ plus KPI bonus of 5%Premium overtime opportunities (x1.5 & x2)Training and career development, including health and safety training, management training (ILM), cross skilling and upskillingJob security and personal development within a market leading, international manufacturing organisationHours of work - 4 on 4 off days and nights - 6am to 6pm, 6pm - 6amAttractive Benefits: Matched pension up to 10%, share options, premium overtime rates, and an extensive benefits programme (including a cycle-to-work scheme and shopping discounts).Work in a modern manufacturing environment alongside a skilled team of engineers in a secure and permanent role.Key Duties of Engineering Team Leader:Managing the assignment of either electrical or mechanical workload across the departmentUndertaking improvement projects working closely with central project engineering teamsDeputy to maintenance manager, taking control of staff during when absent or off siteResponsible for subcontractor management and safetyResponsible for identifying and eliminating recurring plant issues through engineering improvementsResponsible for driving improved plant reliability through best practiceExperience and Qualifications Required:Engineering qualified NVQ 3 or equivalent qualification - Mechanical or Electrical - Multiskilled or Full Apprenticeship in Engineering MaintenanceStrong Environmental Health and Safety awarenessPrevious experience as an Engineering Shift Manager, Maintenance Supervisor, Engineering Manager, Maintenance Manager etcAwareness of manufacturing costs and cost controlPrevious experience of undertaking maintenance within a manufacturing environmentPrevious experience of the development and application of PPM activitiesIf you're ready to take the next step in your career and join a market-leading company with a focus on innovation and employee development, we want to hear from you!Apply now and be part of an exciting new chapter in manufacturing excellenceTPBN1_UKTJ

Site ManagerThis challenging and exciting opportunity requires an individual with a good technical background and demonstrable experience in taking the responsibility for overseeing engineering-based sites and installations.We are looking for an experienced Site Manager/Supervisor from the mechanical engineering, industrial or fabrication sectors. An engineering trade qualification is essential. The role is working 42 hours per week with some overseas travel required. A full driving licence is also essential.Due to sustained growth, a significant forward order workload and a continued commitment to be at the forefront of the industry, our client is now searching for a talented and motivated Site Manager. The successful candidate will have the day-to-day responsibility for the safe, timely and profitable delivery of a wide variety of sites and installations. This will sometimes include managing site-based teams, and resolving any technical, operational and commercial issues as required.The RoleOversee the activities of the designated site installations and teams, providing guidance, control and structure to the decision-making processes.Ensure the resources available on site are managed to achieve the least cost option to satisfy project objectives.To oversee the installation phase of projects, working closely and liaising with site personnel, customer, suppliers, sub-contractors and other internal departments.Ensure sites and installation activities are managed in a manner that provides budgetary control of resources in order to increase the departments performanceAssist with the preparation of RAMS, lift / crane plans and HSEQ documents, to ensure compliance with current regulations and legislations.Assist in site audits, inspections, surveys, pre-site visits and meetings for installation aspects of all projects on behalf of the companyEnsure all installations are planned and executed in accordance with operating policy, whilst maintaining the professional and progressive image of the company wherever possibleWork under deadline pressures in an efficient, composed and calm mannerHelp to manage suppliers and sub-contractors to improve safety, performance and profitThe PersonPossessing experience in a similar role from any area of the aforementioned sectors, coupled with a recognised engineering trade qualificationPossess first-hand exposure to the supervision of engineering-based site installationsHold experience of a variety of multi disciplined engineering techniquesPossess an understanding of all stages of the site installation process, coupled with the ability to support your team as requiredAble to identify the requirements of assigned sites to produce appropriate delivery plansAble to positively engage with clients, suppliers, contractors, site teams and colleaguesEfficiently manage situations when workload presents conflicting demands on timeMonitor, progress and implement controls to ensure tasks are achievedCommunicate facts to stakeholders (internally or externally) in an effective mannerDeliver efficient and effective customer service at all timesA full UK driving licence and the willingness to travel UK wide and sometimes overseasOur ClientOur client is a market leading design, build, installation and maintenance contractor operating at the cutting edge of engineering excellence driven and supported by a passion for innovation. They have continuously diversified and expanded their expertise, enabling them to deliver a huge range of advanced engineering solutions for the Aerospace, Infrastructure, Manufacturing, Defence, Industrial and Energy sectors, amongst many others. They not only complete projects successfully and to the highest of standards at all times but also add value to their clients by giving them total support from the beginning to the end of each and every contract.An attractive basic salary plus extensive benefits package is on offer to the successful candidate, along with longevity and security of work and forward career progression given that our client possesses a significant contract pipeline for the long-term future and is firmly committed to continued growth over the next 5-10 years.TPBN1_UKTJ

\n READY MIX PLANT SUPERVISOR \n Location: Washwood Heath Concrete Plant, Birmingham | Days role with overtime \n Are you a hands-on Supervisor from a heavy industrial or manufacturing environment? Do you thrive in a fast paced operational setting and take pride in safe, high-quality production and great customer outcomes? Are you an experienced Supervisor looking for a new challenge? If so and you have expe... \n \n \n \n ZIPC1_UKTJ

Location: Washwood Heath Concrete Plant, Birmingham | Days role with overtime.Are you a hands-on Supervisor from a heavy industrial or manufacturing environment? Do you thrive in a fast paced operational setting and take pride in safe, high-quality production and great customer outcomes? Are you an

Production Supervisor desirable skills and experience -. Previous supervisory, Team Leader or Senior Production experience within a manufacturing environment. A Production Supervisor opportunity has arisen within a well-established manufacturing business operating within the engineering and industri

Job Title: Injection Moulding Technician Salary: £16.50 per hour (+ £3.00 night shift premium) Location: Birmingham Working Hours: Rotating shifts (6am-2pm / 2pm-10pm) Overview We are seeking an experienced Injection Moulding Technician to join a busy and forward-thinking manufacturing environment. Reporting to the Technical Manager, you will be responsible for setting and running moulding production orders, ensuring consistent high-quality output. You'll play a key role in achieving Right First Time and Just in Time manufacturing, working with advanced moulding techniques and standardised processes. Key Responsibilities Set and condition injection mould tools to meet production requirements Run production orders using pre-set programmes, monitoring output quality throughout the shift Respond to machine alarms and faults, implementing permanent corrective actions Carry out routine maintenance and fault finding on injection moulding machines and tooling Control and optimise processing parameters in line with product standards and cost requirements Maintain accurate records of maintenance, production, and quality checks Support supervision of shift staff when required in the absence of a Supervisor Prepare auxiliary equipment, jigs, fixtures, and assembly machines Perform quality checks in line with company standards and identify defects Carry out first-line troubleshooting of process and quality issues Use and update production monitoring systems (e.g., Blackbird) Ensure safe handling and accurate movement of materials and stock Support tooling trials, processing, and optimisation for new projects Operate forklift truck when licensed Participate in training and continuous improvement initiatives Skills & Experience Required Minimum 3 years' experience as an Injection Moulding Technician Strong mechanical aptitude and fault-finding capability Experience with injection moulding machines, tooling, and process optimisation Basic electrical knowledge Familiarity with production or ERP systems (e.g., Microsoft Dynamics) Strong problem-solving skills with an innovative mindset Good communication and decision-making ability High attention to detail Continuous improvement mindset with knowledge of Lean manufacturing principles For further details, please contact Nick Sollis – 01453 829767 or email your cv Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process. TPBN1_UKTJ

Production Lead (Electronics / Electrical Manufacturing) £43,000 - £48,000 + Employee Ownership Benefits + Training + Company Bonus + Early Finish Friday Dudley Are you a senior member of production with a background in an electronics or electrical assembly environment, looking to join a well-established employee-owned business where you'll lead production operations and drive continuous improvement? Do you enjoy managing people, coordinating production schedules and working closely with multiple departments to deliver high-quality products on time? The company have over 40 years of experience providing specialist electronic manufacturing services, supporting customers with low and medium volume electronic assemblies across a wide range of industries. Operating as an Employee Ownership Trust, the company combines technical expertise with a collaborative culture, offering services including design for manufacture, prototyping, component sourcing and testing. This is an excellent opportunity for a senior member of the production function looking to take the next step to oversee daily manufacturing operations, lead a skilled production team and play a key role in maintaining quality, efficiency and on-time delivery. The Role: Manage the day-to-day operations of the electronics production facility Plan and schedule production to meet customer delivery requirements Lead and develop a production team of 35 operatives Monitor production quality, safety and operational performance Allocate labour and resources to maximise efficiency Ensure production processes comply with ISO 9001 Quality Management Systems The Person: Background in a senior production role Experience in electronics, or electrical manufacturing Job reference: BBBH26227c Keywords: Production Manager, Production Supervisor, Manufacturing Manager, Electronics Manufacturing, Electronics Production, ISO 9001, Quality Management, KPI Management, Production Control, Process Improvement, Production Engineer, Dudley, Kingswinford, West Midlands We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skillset. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website. TPBN1_UKTJ

EP Group HGV Class 2 Driver EP Group is an award winning, global packaging manufacturer with production facilities across Europe and South East Asia. Our global headquarters in Birmingham is home to our dedicated paper manufacturing division providing a wide range of food packaging products for the likes of McDonalds, Amazon, Marks & Spencer and Greggs. HGV Class 2 Driver We now have an opportunity for an experienced HGV Class 2 driver to join the team in our Birmingham Outbase. To provide a best in class, professional, efficient, safe and legally compliant delivery service. The role is offered on a full-time basis starting between 4 and 7am, guaranteed 50 hours pw. Occasional nights out are required. We offer an excellent package which includes a highly competitive remuneration; pension, and 28 days holiday inclusive of bank holidays. Reports to: Transport Manager The Role HGV Class 2 Driver: Responsible for the safe, accurate and timely transportation of multiple daily cage/pallet and/or carton deliveries from outbase to customer As first point of contact, provide excellent customer service and actively seek ways to engender a positive relationship at all times Immediately communicate any issues encountered to central Transport hub and keep customer apprised of actions being taken to resolve Load and unload deliveries, either individually or with assistance, with or without mechanical freight handling equipment Perform frequent lifting, pulling, and carrying of freight Inspect vehicle for defects and safe operating condition before, during, and after trips and submit a fully completed daily vehicle check sheet Maintain interior and exterior vehicle cleanliness on a daily basis Confirm prior to outbase departure that all delivery details are available for inspection and that appropriate proof of delivery (POD) accompanies each delivery and is completed/signed off prior to leaving the customers premises Ensure that legal compliance, Health and Safety regulations and EPUK/Outbase procedures are followed at all times Complete drop point risk assessments as and when required When necessary, complete 1 for 1 pallet/cage repatriation and report any non-conformance, ensuring cages/pallets collected are re-usable Feedback any travel/dwell time issues as and when encountered to central Transport hub as they happen Feedback any delivery restriction issues/changes to Outbase Supervisor Any other ad-hoc reasonable duties required by EPUK The Person HGV Class 2 Driver: Minimum 2 Years experience within a final mile delivery operation HGV 2 (Cat C) driver licence clean licence required Driver Qualification Card (DQC) Driver Digital Tachograph Card Strong geographical knowledge of region Highly focused on customer service Excellent communication skills Must be well presented, with a professional behaviour in key customer facing role Self-starter - demonstrating an energetic, hands-on approach Self-motivated with an ability to work individually as well as within a team TPBN1_UKTJ

CNC Laser Supervisor (Nightshift) Location: Dudley Area Salary: £40K - £43K + Bonus package Who are we? Accurate Laser Cutting Ltd are a leading sheet metal sub-contractor based in Oldbury, West Midlands. Established in 2005, we offer a bespoke laser cutting and forming service to a wide range of industries across the UK. Our Laser department is an exciting, varied and busy environment. We deal with various engineering sectors and materials, so the day-to-day role will always be diverse. Our convenient location, just on the outskirts of Dudley, West Midlands, means our premises are easily accessible via bus, car & train. What are we looking for from a Nightshift Laser Supervisor? Previous supervisory or team-leading experience within a manufacturing environment Must have previous experience operating and setting laser cutting machinery Strong knowledge of sheet metal processing and laser cutting Ability to read and interpret engineering drawings Strong communication and organisational skills Proactive approach with the ability to work independently Punctual, reliable and flexible Good attention to detail and a strong focus on quality Ability to motivate and support a small production team Willing to continually learn and develop skills Ideally hold a counterbalance FLT licence What will your duties be working as a Nightshift Laser Supervisor? Supervise and support the nightshift Laser team to ensure production targets are achieved Set and operate laser cutting machinery Ensure machines are running efficiently and production schedules are followed Monitor product quality and ensure all required quality checks are completed Read and interpret engineering drawings and production paperwork Carry out first-off and in-process quality inspections Ensure materials and jobs are correctly identified and processed Troubleshoot basic machine and production issues Ensure all health & safety procedures are followed Manage and prioritise workload throughout the shift Liaise with the dayshift team to ensure an effective handover Support and train team members where required Maintain a clean, safe and organised working environment Report any machine, quality or production issues to management You will be working as part of a small but fast-paced production team, taking responsibility for the smooth running of the Laser department throughout the nightshift. Working Hours 6PM 6AM Monday Thursday Why should you apply for the role of Nightshift Laser Supervisor? Competitive salary package Company bonus scheme Paid overtime Onsite parking You will be joining a company that continually invests in its people and technology Varied and interesting work across a wide range of engineering sectors When do we need you? ASAP notice periods will be accepted Interested? Click Apply to continue your application. No agencies will be considered. TPBN1_UKTJ

Gap Technical Ltd in Dudley is seeking an experienced Electrical Maintenance Supervisor to lead and support the electrical maintenance team on a day-to-day basis.You will carry out electrical maintenance across site facilities and manufacturing machinery, ensuring PPM/TPM schedules and diagnosing fa

Duties of a Logistics Supervisor. Experience of a Logistics Supervisor. Previous Logistics Supervisor experience within a manufacturing environment.

Pertemps West Bromwich is recruiting an experienced Logistics Supervisor to lead day-to-day logistics and warehouse operations at a busy manufacturing facility in Oldbury. You will supervise the logistics team, coordinate deliveries and collections, oversee loading and unloading, and manage stock to

Minimum of 2 years' supervisory experience within a manufacturing or engineering environment. If you're an experienced Shift Supervisor looking for a secure permanent opportunity where you can make a real impact within a successful manufacturing business, we'd love to hear from you. As Shift Supervi

Dunraven Recruitment Ltd is seeking a QA Supervisor located in Tipton to lead the Quality Assurance department on night shifts. The ideal candidate will have experience in a QA role within food manufacturing, strong HACCP and GMP knowledge, and effective communication skills.

Previous Production Supervisor experience within a manufacturing environment.

Pertemps West Bromwich is seeking an experienced Logistics Supervisor to lead warehouse operations at a manufacturing facility in Oldbury, paying £17. You will direct the logistics team, coordinate deliveries and collections, and manage loading, unloading, and stock control with precision.

Pertemps West Bromwich are currently recruiting for an experienced Logistics Supervisor to lead the day-to-day logistics and warehouse operations at a busy manufacturing facility in Oldbury. Previous experience in a logistics, warehouse or supervisory role. Pertemps West Bromwich seeks an experience

Shift Coordinator Location: Kings Norton Salary: £28,000 - £30,000 per annum Hours: Monday to Friday, 2:00pm - 10:00pm (Afternoon Shift) Pertemps are recruiting on behalf of a well-established manufacturing business for an experienced Shift Coordinator to join their production team in Kings Norton. This is an excellent opportunity for a motivated supervisor or team leader to join a fast-paced manufacturing environment where quality, teamwork and continuous improvement are at the heart of the operation. As Shift Coordinator, you will support the Shift Controller with the day-to-day running of the production department, ensuring production targets, quality standards and customer requirements are consistently achieved. You will lead and motivate a team of production operatives while maintaining a safe and efficient working environment. Key Responsibilities -Support the Shift Controller with the daily management of production operations. -Lead, motivate and supervise production operatives to achieve production and quality targets. -Ensure all Health & Safety procedures are followed at all times. -Allocate labour and resources effectively to meet production plans and customer demand. -Deliver shift briefings and communicate production priorities to the team. -Monitor operator performance, providing coaching, training and support where required. -Ensure production processes and work instructions are followed correctly. -Troubleshoot production issues and escalate maintenance concerns to minimise downtime. -Work closely with colleagues across shifts to ensure effective communication and smooth handovers. -Investigate quality concerns and support corrective actions and continuous improvement initiatives. -Assist with employee training, performance reviews and development. -Provide cover for the Shift Controller during periods of absence. The successful candidate will have: -Previous supervisory or team leadership experience within a manufacturing environment. -Ideally a minimum of three years' manufacturing experience, with paint, automotive or similar production experience advantageous. -Strong leadership and people management skills. -Excellent communication and organisational abilities. -A proactive approach to problem-solving and continuous improvement. -The ability to perform well in a fast-paced environment. -GCSE Maths and English (or equivalent). -A full UK driving licence

Job Title: Press Operator Location: Birmingham Salary: Approximately £29,670 during training, rising to approximately £31,625 once trained, including shift allowances Hours: 38 hours per week Shift: Weekly rotating mornings and afternoons Contract: Permanent Operate modern machinery and build a long-term manufacturing career Are you an experienced Press Operator looking for a secure, permanent position with structured training, clear pay progression and an early finish every Friday? Pertemps is recruiting on behalf of an established and growing Birmingham manufacturer. This is an excellent opportunity to join a quality-focused production environment where your experience will be valued and you will have the support needed to develop further. You will operate power presses ranging from 20 to 250 tonnes, manufacture components to defined specifications and inspect your work throughout the production process. The Role Reporting to the Manufacturing Supervisor, you will operate power presses and associated production machinery to manufacture high-quality components in line with engineering and customer requirements. Your responsibilities will include: Operating power presses ranging from 20 to 250 tonnes Manufacturing components to engineering drawings and quality specifications Completing first-off and in-process inspections Using verniers, micrometers, gauges and other measuring equipment Ensuring components meet the required standards before progressing Monitoring machine performance throughout production Reporting machine faults and production issues promptly Working with Supervisors, Coordinators and Engineers to maximise efficiency Following production schedules and achieving daily output targets Completing production records and maintaining product traceability Supporting colleagues and contributing to a positive team environment Maintaining a clean and organised workplace in line with 5S Completing manual-handling duties when required Following all quality and Health & Safety proceduresWhat We’re Looking ForTo be considered, you should have: At least two years’ experience within a manufacturing or production environment Previous experience operating power presses between 20 and 250 tonnes Experience inspecting manufactured components Confidence using verniers, micrometers and gauges A good understanding of manufacturing quality standards Strong attention to detail Basic computer literacy The ability to work safely within a busy production environmentAbout You Takes pride in producing accurate, high-quality work Follows instructions and production processes carefully Identifies and reports problems promptly Works effectively both independently and as part of a team Is reliable, organised and adaptable Is comfortable with the manual-handling requirements of the role Has a positive attitude and is willing to learn Takes personal responsibility for working safelySalary and Shift Pattern The training rate is £13.20 per hour, increasing to £14.07 per hour following successful completion of training. You will rotate weekly between: Morning Shift – 7.5% allowance Monday to Thursday: 6:00am–2:00pm Friday: 6:00am–12:00pmAfternoon Shift – 20% allowance Monday to Thursday: 2:00pm–10:00pm Friday: 12:00pm–6:00pmBased on the weekly rotation, total annual earnings are approximately: £29,670 during training £31,625 once fully trainedWhat’s on Offer? Permanent, full-time employment Clear pay progression following training 7.5% morning and 20% afternoon shift allowances Weekly rotating shift pattern Early finish every Friday Full training and ongoing development Stable employment with a growing manufacturer Supportive and experienced production team Long-term career and progression opportunitiesIf you have experience operating power presses and want a permanent role offering structured training, competitive shift allowances and long-term stability, apply today through Pertemps

Job Title: CNC Setter Operator Location: Curdworth, Birmingham Salary: Approximately £33,576 during training, rising to approximately £35,535 following training, including shift allowances Hours: 38 hours per week Shift: Weekly rotating mornings and afternoons Contract: Permanent Set precision components, not just load machines. Are you an experienced CNC Setter Operator looking for a stable, permanent position with structured pay progression and an early finish every Friday? We are recruiting for an established and growing Birmingham manufacturer that continues to invest in its people, machinery and production capabilities. You’ll set and operate a range of bar- and coil-fed CNC machinery, including DMG, Mori Seiki and Hardinge machines with Fanuc controls. You’ll select the correct tooling and fixtures, make machine adjustments, and inspect your own work to ensure components meet the required quality and dimensional standards. This is an excellent opportunity for a skilled CNC professional who takes pride in precision engineering and wants to develop within a supportive manufacturing environment. The Role Reporting to the Manufacturing Supervisor, you will set and operate CNC milling, turning and other production machinery to manufacture precision components from engineering drawings. Your responsibilities will include: Setting and operating CNC milling and turning machinery Producing components to drawings, specifications and defined tolerances Selecting and installing tooling, jigs, fixtures and cutting tools Completing tool changes and adjusting offsets Making minor CNC programme amendments where required Conducting first-off and in-process inspections Using verniers, micrometers, gauges and other measuring equipment Monitoring machine performance and helping to improve cycle times Identifying and reporting faults or production issues Completing production records and maintaining product traceability Supporting less-experienced colleagues when required Maintaining a clean, organised workplace in line with 5S Following all quality and Health & Safety procedures What We’re Looking ForTo be considered, you should have: At least two years’ experience setting and operating CNC machinery Experience setting and operating CNC milling and turning machinery The ability to complete tooling changes and offset adjustments Some experience making basic CNC programme edits Confidence reading and interpreting engineering drawings Experience inspecting precision-engineered components The ability to use verniers, micrometers and gauges accurately Good attention to detail and a quality-focused approach Basic computer literacy A Level 3 Engineering Apprenticeship or equivalent qualification would be advantageous, but relevant practical experience is more important. Salary and Shift Pattern The training rate is £14.94 per hour, increasing to £15.81 per hour following successful completion of training. You will rotate weekly between: Morning Shift – 7.5% allowance Monday to Thursday: 6:00am–2:00pm Friday: 6:00am–12:00pm Afternoon Shift – 20% allowance Monday to Thursday: 2:00pm–10:00pm Friday: 12:00pm–6:00pm Based on the weekly rotation, the total annual earnings are approximately: £33,576 during training £35,535 following training What’s on Offer? Permanent, full-time employment as a CNC Setter Operator Clear pay progression following training Competitive rotating-shift allowances Early finish every Friday Ongoing technical training and development Modern CNC machinery and a quality-led production environment Long-term stability with opportunities to progress A supportive and experienced engineering team If you are an experienced CNC Setter Operator who can confidently set machines, interpret drawings and inspect precision components, apply today to discuss the opportunity in confidence

At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity. The Role We are looking for Service Engineers to join our Service team in Birmingham and surrounding areas. If you have a comprehensive Lift engineering background, including an NVQ 3 in Lift Engineering or equivalent we want to hear from you! Key Responsibilities Carrying out regular planned preventative maintenance and service visits Meeting agreed customer response times, building relationships with our clients Providing regular updates to the Service Supervisor/ Service Manager Problem solving and working on your own initiative What Were Looking For NVQ 3 in Lift Engineering Experience of working with Lifts Strong customer skills A clean UK Driving License Flexible Hours If you are ambitious, safety-driven, and ready to take the next step in your lift engineering career, we would love to hear from you. Why Join ORONA? We offer more than just a job we offer long-term career development within a stable and growing company. What We Offer: Attractive Salary : Competitive pay that reflects your skills and experience Generous Holiday Allowance : Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidays Secure Future : Benefit from a pension scheme with increasing company contributions as you grow with us Peace of Mind : Life Inssurance to support you and your loved ones Health & Wellbeing : Medical Cash Back Plan to help with health costs, plus access to 24/7 GP services Family-Friendly Benefits : Enhanced leave for family-related events and emergencies Support When You Need It : Employee Assistance Programme offering confidential support for personal or work-related challenges Eye Care : Eyecare vouchers to help keep your vision sharp Recognition for Longevity : Long Service Awards to celebrate your milestones with us Referral Rewards : Earn a Recruitment Referral Fee by helping us find top talent Continuous Growth : Ongoing Training & Development opportunities to support your career journey Join ORONA and be part of a company moving the world safely and efficiently every day. TPBN1_UKTJ

Assembly Operative - Perry Barr (B42) | Long-Term Work | Progression to Supervisor Pay: £12.71 per hour Hours: Monday-Thursday, 6:30am-5:00pm (30-minute unpaid break daily) Paid hours: 40 hours per week We're recruiting an Assembly Operative for a long-term position based in Perry Barr (B42). You'll be joining a well-established manufacturer and supplier of rubber components, primarily supporting the automotive industry (and other sectors). This role offers career progression, with the opportunity to move into a Supervisor position for the right person. Training will also be provided on a wire cutting machine and die cast machine. Key duties Working from engineering drawings to measure and cut cables to specified lengths Assembling small components accurately and consistently Packing finished products ready for despatch Supporting production and quality standards on site About you Background in a manufacturing/engineering environment (essential) Able to work from engineering drawings and follow specifications Good attention to detail and pride in producing quality work Reliable, hands-on and keen to learn new machinery and processes Ambition to develop and take on more responsibility over time If you're looking for a stable, long-term role with training and genuine progression, apply now. Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corporate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Friendly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Job Title: CNC Setter Operator Location: Curdworth, Birmingham Salary: Approximately £33,576 during training, rising to approximately £35,535 following training, including shift allowances Hours: 38 hours per week Shift: Weekly rotating mornings and afternoons Contract: Permanent Set precision components, not just load machines. Are you an experienced CNC Setter Operator looking for a stable, permanent position with structured pay progression and an early finish every Friday? We are recruiting for an established and growing Birmingham manufacturer that continues to invest in its people, machinery and production capabilities. You’ll be trusted to set and operate CNC machinery, select the correct tooling and fixtures, make adjustments and inspect your own work. This is an excellent opportunity for someone who takes pride in producing accurate, high-quality components and wants to develop within a supportive engineering environment. The Role Reporting to the Manufacturing Supervisor, you will set and operate CNC milling, turning and other production machinery to manufacture precision components from engineering drawings. Your responsibilities will include: Setting and operating CNC milling and turning machinery Producing components to drawings, specifications and defined tolerances Selecting and installing tooling, jigs, fixtures and cutting tools Completing tool changes and adjusting offsets Making minor CNC programme amendments where required Conducting first-off and in-process inspections Using verniers, micrometers, gauges and other measuring equipment Monitoring machine performance and helping to improve cycle times Identifying and reporting faults or production issues Completing production records and maintaining product traceability Supporting less-experienced colleagues when required Maintaining a clean, organised workplace in line with 5S Following all quality and Health & Safety proceduresWhat We’re Looking ForTo be considered, you should have: At least two years’ experience setting and operating CNC machinery Experience with CNC milling centres, VMCs, VMG machines or similar equipment The ability to complete tooling changes and offset adjustments Some experience making basic CNC programme edits Confidence reading and interpreting engineering drawings Experience inspecting precision-engineered components The ability to use verniers, micrometers and gauges accurately Good attention to detail and a quality-focused approach Basic computer literacyA Level 3 Engineering Apprenticeship or equivalent qualification would be advantageous, but relevant practical experience is more important. Salary and Shift Pattern The training rate is £14.94 per hour, increasing to £15.81 per hour following successful completion of training. You will rotate weekly between: Morning Shift – 7.5% allowance Monday to Thursday: 6:00am–2:00pm Friday: 6:00am–12:00pmAfternoon Shift – 20% allowance Monday to Thursday: 2:00pm–10:00pm Friday: 12:00pm–6:00pmBased on the weekly rotation, the total annual earnings are approximately: £33,576 during training £35,535 following trainingWhat’s on Offer? Permanent, full-time employment Clear pay progression following training Competitive rotating-shift allowances Early finish every Friday Ongoing technical training and development Modern CNC machinery and a quality-led production environment Long-term stability with opportunities to progress A supportive and experienced engineering teamIf you are an experienced CNC Setter Operator who can confidently set machines, interpret drawings and inspect precision components, apply today to discuss the opportunity in confidence

Role Overview Working at the end of the production line within a fast-paced food manufacturing environment. The role involves packing finished products, quality checking, and preparing products for dispatch while maintaining high food safety and hygiene standards. Key Duties Packing finished products at the end of the production line. Quality checking products before packing. Stacking and palletising finished goods. Keeping the work area clean and tidy. Following food hygiene and health & safety procedures at all times. Reporting any product or machinery issues to the supervisor. Supporting the production team with general duties as required. Manual handling as part of the role. Requirements Previous production or food manufacturing experience is beneficial but not essential. Able to work in a fast-paced environment. Good attention to detail. Reliable with good timekeeping. Comfortable with manual work and standing for long periods. Shift Pattern AM Shift Monday to Saturday 06:00 - 14:30 30-minute unpaid break Standard working week is 5 days, with the opportunity to work 6 days where available. PM Shift Monday to Saturday 14:00 - 22:30 30-minute unpaid break Fixed shift pattern. Standard working week is 5 days, with the opportunity to work 6 days where available. Pay Rates End of Line Operative: £12.71 per hour Production/Machine Operative: £13.00 per hour (where the client moves an employee into a skilled role) Location Smethwick B66 To Apply Please submit CV in the first instance Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corporate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Friendly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Pertemps West Bromwich are currently recruiting for an experienced Logistics Supervisor to lead the day-to-day logistics and warehouse operations at a busy manufacturing facility in Oldbury. You will supervise the logistics team, coordinate deliveries and collections, oversee loading and unloading, manage stock and ensure all activities are carried out safely and efficiently. The site operates under Lower Tier COMAH, so a strong understanding of health & safety, hazardous materials and safe working practices is essential. Key Responsibilities Supervise the logistics and warehouse team. Coordinate deliveries, collections and vehicle movements. Oversee loading, unloading and material handling. Maintain accurate stock records. Ensure safe storage and handling of materials. Complete required transport and logistics paperwork. Carry out toolbox talks and safety briefings. Support audits, inspections and emergency procedures. Identify and implement improvements to safety and efficiency. Ensure compliance with COMAH, ADR, COSHH and company procedures. About You Previous experience in a logistics, warehouse or supervisory role. Experience in a chemical, manufacturing, hazardous or COMAH environment is preferred. Good understanding of health & safety and safe systems of work. Experience supervising people and coordinating daily activities. Working Hours & Pay Monday to Thursday 08.30 - 16.45 and 08.30 - 16.15 on Friday (37.5 hours) £17.17 per hour This position offers great opportunities for career advancement within the company after a successful trial period. Please email your CV to (url removed)

Your new company Location: Aston, Birmingham Salary: £40,000 - £45,000 (Dependent on Experience) Contract: 12-Month Fixed-Term Contract (Maternity Cover) A well-established and growing Midlands-based business is seeking an experienced Finance Supervisor to join its finance team on a 12-month maternity cover contract.Operating within a project-led environment, the business has experienced significant growth in recent years and offers a collaborative, hands-on culture where finance plays a key role in supporting operational decision-making. This is an excellent opportunity to join a successful SME where you will work closely with senior leadership and gain exposure across the wider finance function. There is also potential for the role to become permanent as the business continues to expand.Your new role Reporting directly to the Finance Director, this role is ideally suited to an experienced Finance Supervisor, Senior Accounts Assistant or Accounts professional who enjoys being involved in the day-to-day running of the finance function.This is not a traditional management accounting role. Instead, the focus is on ensuring the smooth operation of core finance processes, maintaining accurate ledgers, supporting month-end activities and assisting with the supervision and coordination of transactional finance activities.The successful candidate will be someone who enjoys working in a hands-on SME environment and is comfortable getting involved across multiple areas of finance. Ledger Management Maintain accurate purchase and sales ledgers. Ensure invoices are processed and posted accurately. Monitor ledger integrity and resolve discrepancies. Assist with account reconciliations and balance sheet reconciliations.Month-End Support Support month-end close activities. Assist with accruals, prepayments and journal postings. Ensure accounting records are accurate and up to date. Work closely with the Finance Director to support management reporting requirements.Transactional Finance Oversee high-volume invoice processing activities. Support supplier and customer account management. Monitor outstanding items and ensure timely resolution. Assist with cash allocation and account reconciliation activities.Team & Stakeholder Support Work closely with administrative and operational teams to ensure financial information is accurate. Act as a key point of contact for finance-related queries. Support the efficient running of the finance department and identify opportunities for process improvements. What you'll need to succeed Previous experience in a Finance Supervisor, Accounts Supervisor, Senior Accounts Assistant or similar finance position. Strong transactional finance experience across purchase ledger, sales ledger and reconciliations. Good understanding of month-end processes. Experience supporting management accounting activities. Strong attention to detail and organisational skills. Excellent communication and stakeholder management abilities. Intermediate to advanced Excel skills.Desirable AAT qualified, Part-Qualified ACCA/CIMA, or Qualified by Experience (QBE). Experience within construction, engineering, manufacturing or project-based environments. Experience using Microsoft Dynamics NAV or similar ERP systems.What you'll get in return Potential for a longer-term opportunity. 25 days holiday plus bank holidays. Annual bonus scheme. Free on-site parking. Free staff canteen. Flexible start and finish times. Supportive, collaborative working environment. Opportunity to work closely with senior leadership and make a visible impact within the business.What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Warehouse Manager The Role: To lead the safe, efficient and compliant operation of the warehouse, ensuring the effective receipt, storage, control and dispatch of stock and customer orders. The role is responsible for supporting both the distribution function and sign manufacturing business unit by ensuring inventory accuracy and high standards of customer service. Key Responsibilities: Warehouse Operations Manage all goods in, storage, stock control, picking, packing and dispatch activities. Ensure customer orders are accuratly picked, packed and dispatched to meet agreed delivery dates and service levels. Oversee the receipt of supplier deliveries, ensuring stock is checked, booked in and stores in the correct location. Maintain inventory accuracy thorugh regular stock checks, audits and investigation of stock discrepncies. Support the TM and Commercial Sign Manufacturing operation by ensuring the availability and movement of raw materials, components and finishe dproducts. Ensure the safe loading and unloading of vehicles and effective management of warehouse space, equipment and resources. Identify and implement operational improvements to increase efficiency, productivity and customer satisfaction.Team Leadership and Management Lead, motivate and develop warehouse personnel to achieve operational and business objectives. Plan and allocate resources to meet workload demands and service requirements. Conduct regular team meetings, performance reviews and return to work discussions. Identify training and development needs to ensure competence across all warehouse activities. Promote a positive culture of accountability, teamwork, continuous improvement and employee engagement. Manage departmental costs and resource in line with budgets and business targets. Protect company assets and maintain security of stock, facilities and equipment.Quality Ensure high standards of quality, accuracy and service are maintained across all warehouse processes. Accountable for inventory accuracy and order fulfilment performance. Investigate stock issues, customer complaints and process failures, implementing corrective actions where required. Support continuous improvement initiatives to enshance product quality, operational performance and customer experience. Maintain high standards of house keeping and workplace organization. Ensure compliance with company quality procedures and support internal and external audits.HSEQ Lead by example in promoting positive HSEQ culture. Ensure compliance with all relevant legislation, company policies, risk assessments, safe systems of work and operational procedures. Maintain and review RAMs, risk assessments and control measures relevant to warehouse activities. Investigate accidents, incidents and near misses, identifying root causes and implementing corrective actions. Conduct workplace inspections, audits and safety briefings, ensuring actions are completed within agreed timescales. Support environmental, quality and sustainability initiatives, including ISO management systems and carbon reduction objectives. Work closely with the HSEQ team to drive continuous improvement, share best practice and maintain compliance across the business.Key measures & targets: Warehouse operational performance Stock accuracy and inventory control Customer order fulfilment and on time dispatch Team performance, development and engagement HSEQ compliance and continuous improvement Security of assets, stock and facilityKey relationships: Signs Supervisor Warehouse Team Sales Team Operations Manager Logistics SupervisorPerson Specification: The successful candidate is likely to meet all the following criteria: Essential Previous experience of managing a warehouse operation. Commercially aware Computer literate Attention to detail and ability to follow procedures.Desirable Industry knowledge Full UK Driving LicenseAbout BCS Group: BCS Group, a subsidiary of Barhale Holdings Plc, is a privately owned company. We are a leading supplier of safety and construction products based in the Midlands. We pride ourselves on providing a first-class service to all our customers, ensuring the right product or solution is delivered to the right location on time. With over 5,000 items within our core range, BCS Group can fulfil any order and ensure it is delivered directly via our dedicated transport fleet or those of our partners. Manufacturing: Our capabilities include standard and bespoke signage, labels, temporary and permanent road traffic signs and bespoke steel fabrication/installation which includes footbridges, walkways, flooring, guardrails, ladders and tunnelling products. Extensive Stock Range: Distributor of leading industry brands in PPE & clothing, traffic management, safety & lifting and site equipment products. These include Bollé, Pulsar, Globus, Rock Fall, Progarm, Portwest, Melba Swintex, Oxford Plastics, JSP, Nissen, Carters, Orafol, Crowcon, Radiodetection, Dräger, Ridgegear, and Plant Nappy. Safety Equipment Servicing: Specialist safety & lifting repair, calibration and inspection since 1999. We have our own purpose-built maintenance and calibration facility for gas detection, cable avoidance, breathing apparatus and lifting equipment which along with our fully equipped mobile calibration unit is where all maintenance and repairs are carried out. Our staff are trained and fully qualified in the maintenance, calibration and inspection of a full range of specialist safety & lifting equipment. Our People: With a direct workforce philosophy, the company culture is driven by our core values, which describe how we act day-to-day. We ensure all your needs are met through our national call centre and dedicated account management. Triple Accreditation: ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2011 standards, which means our customers can have complete confidence that we have an ongoing commitment to be a safe, efficient and responsible partner. Caring and investing in you As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them. From the moment you join us, your well-being and career aspirations will be supported by. Competitive salary Company Pension Life Assurance Private Medical 25 days annual leave in addition to 8 public bank holidays and loyalty days 8 hours volunteering Employee Assistance Programme to support your mental, physiological, and financial well-being. Flexible benefits via salary sacrifice Company car/green car scheme/car allowance/Van (dependent on position) Leadership & management training and coaching Regular line management engagement and appraisal to support your career progression. Development supported by internal and externally delivered training. Continuous service awards

Are you a Manufacturing Supervisor or similar with a background in manufacturing looking to join a well-established company offering a fantastic 4-day working week where you can lead a close-knit team and play a key role in production?. This role would suit a Manufacturing Supervisor or similar with

You'll lead a team, drive maintenance and continuous improvement in a fast-paced manufacturing setting, with a Monday–Friday days schedule and occasional weekend work. CV Technical is seeking an Engineering Supervisor in North Yorkshire.

Nter Talent in Birmingham is seeking an experienced Production Supervisor for the night shift on a permanent basis. The role requires HACCP Level 3, strong leadership, and extensive experience in a food manufacturing environment.

Group is seeking an Automotive Electrical Services Supervisor to lead from the front, remaining hands-on and guiding the team to deliver high quality results at multiple automotive manufacturing sites (Gaydon, Warwick and Oxford area).

The ideal candidate will bring a robust background in manufacturing and strong people management skills, aiming to improve operational efficiency through lean methodologies. Meeveem Limited is searching for a dedicated Value Stream Supervisor in Hull and East Yorkshire. This pivotal role involves dr

The Job People is currently seeking a Production Supervisor in Erdington to lead a three-shift operation and manage stock, deliveries, and team duties.

Ideal candidates will have supervisory experience in food manufacturing, strong leadership skills, and knowledge of food safety practices. A leading recruitment agency is seeking a Senior Recruitment Consultant for a food manufacturing client in Kent.

Ideal candidates will have supervisory experience in food manufacturing and knowledge of HACCP. A leading food production business in Hampshire is seeking a Production Supervisor to oversee the late shift team.

The Butchers Recruiter is seeking a Senior Production Supervisor for its Bilston meat production facility.

We are currently looking to recruit an experienced supervisor, for an exciting new opportunity based in the Midlands area, where you’d be field based supporting our operations across multiple sites when required. The supervisor in this role will provide first point of contact for customer requests

Future Recruitment is sourcing a Quality Shift Supervisor for a plastics manufacturing site in Staffordshire.