Manual jobs in NorwichCreate job alerts

Commercial ElectricianSalary: £32,000 £48,000 per yearAbout the RoleOur client is seeking an experienced Commercial Electrician to join their growing team, working across commercial and industrial sites on a range of exciting projects involving solar PV systems.This is an excellent opportunity for a qualified electrician looking to expand their skills within the renewable energy sector. Previous solar experience is not required, as full training and ongoing support will be provided.Key ResponsibilitiesInstall, gland and terminate SWA cables to a high standard.Construct trunking, cable tray and conduit systems that are level, secure and compliant with industry standards.Carry out LV distribution work, including panel board connections, isolators, MCCBs, RCBOs, metering and labelling.Perform inspection and testing activities, including dead and live testing, and accurately complete EIC and EICR certification.Support solar PV installations, including inverter AC terminations, CT installations and communications power connections, with full training provided.Interpret schematics, cable schedules and method statements, while planning materials and proactively identifying potential issues.Maintain the highest standards of health and safety, including safe isolation procedures, permits to work, working at height, manual handling and compliance with site RAMS.Represent the client professionally on site, maintaining excellent workmanship and a positive attitude.Candidate RequirementsNVQ Level 3 in Electrical Installation (or equivalent) and 18th Edition (BS 7671).Competence in inspection and testing, supported by City & Guilds 2391 or 2394/2395 qualifications, or demonstrable equivalent experience.Proven experience installing and terminating SWA cables, as well as carrying out trunking and traywork within commercial or industrial environments.Confidence in conducting and interpreting electrical tests, including continuity, insulation resistance, polarity, Zs/Ze and RCD testing.Ability to produce accurate test documentation, certification and as-built records.Valid ECS or CSCS card.Full UK driving licence.Desirable Skills and QualificationsThe following are advantageous but not essential:Experience with PV inverters, AC distribution systems for solar installations, or metering and CTs.Knowledge of grid protection systems, including G99/G100 requirements and interface relays.IPAF, PASMA, First Aid or SSSTS certification.What's on OfferCompetitive salary with overtime opportunities.Company vehicle, tools and PPE provided.Full training and support to develop solar PV expertise.Clear progression opportunities into Lead Electrician, Supervisory or Solar Maintenance roles.A supportive, high-performing team environment with a strong focus on quality and professional development.Working ArrangementsPermanent, full-time or part-time opportunities available.Monday to Friday, with occasional evening or weekend work on a rota basis.Regional travel required, including occasional overnight stays depending on project locations.This is a site-based role.Equal OpportunitiesOur client is an equal opportunities employer and welcomes applications from all suitably qualified individuals, regardless of age, disability, gender reassignment, marriage and civil partnership status, pregnancy and maternity, race, religion or belief, sex or sexual orientation.All recruitment decisions are based on merit, skills and business needs. Reasonable adjustments are available throughout the recruitment process.BenefitsCompany carTPBN1_UKTJ

Labourer – Norwich Location: Norwich, Norfolk Job Type: Full-Time Salary: Competitive, based on experience About the Role We are looking for a reliable and hardworking Labourer to join our team on projects across Norwich and the surrounding areas. This is an excellent opportunity for someone who enjoys hands-on work, takes pride in maintaining a safe working environment, and wants to be part of a supportive team. Key Responsibilities Assisting tradespeople with day-to-day site activities. Loading, unloading, and moving construction materials. Keeping work areas clean, tidy, and safe. Following health and safety procedures at all times. Operating basic hand and power tools (where appropriate and trained). Assisting with site setup and general maintenance duties. Carrying out other general labouring tasks as directed by the site supervisor. Requirements Previous labouring or construction experience is preferred but not essential. Must hold a valid CSCS Card. Good physical fitness and willingness to undertake manual work. Reliable, punctual, and hardworking. Ability to work well as part of a team. Strong awareness of health and safety practices. What We Offer Competitive pay. Ongoing, full-time work with opportunities for overtime. Opportunity to gain experience on a variety of construction projects. Friendly and supportive working environment. Opportunities for training and career progression. Apply Now If you're dependable, motivated, and ready to start work in Norwich, we'd love to hear from you. Apply today with your CV or contact us for more information

3D CAD DesignerOur client, a successful manufacturing business close to Norwich, are currently seeking a 3D CAD Designer to join their team.This is a full-time role, based in Norwich, working 9:00am 6:00pm Mon Fri.Benefits:24 days per annum (3 or 4 days to be taken over Christmas shut-down), plus public holidays.Profit Share bonusOpportunity to work on unique, challenging projects with creative freedom in a modern facilitySupport for professional developmentCollaborative, innovative work environmentSkills, Experience & Qualifications:Well presented with an understanding of good business practices and ethics.Sufficiently mobile and flexible to occasionally travel to customers both within and outside the UK when required.Able to spend one or two nights away per month if requiredMust have clean or near clean driving license.Must have a good knowledge of 3D CAD and a working knowledge of AutoCAD 2DGood communication skills - able to communicate verbally and via written media.Understands the principles of design, engineering and show-casing portfolios.Able to work to dead-linesEngineering skills preferred but not essential.Must be adept in use of CAD and other 3D software packagesWorking knowledge of Microsoft packages - particularly Excel, Word, Internet and email. Additional Computer-based knowledge would be an advantageKey Responsibilities:Produce custom product designs for quotation support and product manufacture using 2D and 3D Autocad in accordance with agreed design principles and procedures.Produce `works orders to communicate design and component specification to production functions and external suppliersProduct design and ` works orders must be undertaken in accordance with agreed design principles and procedures defined in company manualSupport and contribute to a team effort for continuous product improvement and enhancementProduce and Develop drawings for a range of products and specification layout designs.To carry out direct sales activities from incoming customer enquiriesTo liaise directly with customers and suppliers to establish requirements, develop design solutions and specifications including occasional off-site visits to assess requirements at first hand.To raise, communicate and negotiate product quotations through use of software packages in line with procedures outlined in the company handbook and approval of senior staff.To maintain customer and supplier enquiry records and ensure an excellent level of customer service is offered at all timesTo adhere to, and assist in the continuous improvement of, Quality procedures and policies outlined in our ISO9001 Quality Manual and Certification criteriaFor further details on this exciting opportunity, please forward a copy of your CV today!Todd Hayes Ltd is an equal opportunities employer. Due to the large number of applications we receive Im afraid we are unable to respond to everyone individually however your details will remain on file should another suitable opportunity become available moving forward.If we can take your application further, we will of course be in touch.Todd Hayes is acting as an Employment Business in relation to this vacancy.Todd Hayes LtdIDN1TPBN1_UKTJ

Accelerate Personnel is currently recruiting for a reliable and hardworking 3.5 Tonne Van Driver to join our team.\n \n \nThis role involves making up to 5 deliveries per day across the UK. As some deliveries may involve manual handling, applicants must be physically fit and comfortable lifting and moving goods.\n \n \nDuties include:\n \n Driving a 3.5 tonne van on nationwide delivery routes\n \n Completing up to 5 delive...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Occupational HygienistNES Fircroft are recruiting an Occupational Hygienist for a major Oil and Gas Operator on an initial 2 year contract. This is a great opportunity for someone with 1+ years experience to join their dedicated QSSHE team where you will be responsible for the delivery of the Occupational Hygiene program. This is a Mon-Fri, 37.5hrs per week role based in the Norwich office. Occasional visits to operational sites. The successful candidate will complete a structured Occupational Hygiene development programme, which is designed to support progression towards the BOHS Certificate of Operational Competence in Occupational Hygiene Overview: The role will support the delivery of the Occupational Hygiene and Human Factors programme across the client's Southern North Sea operations, helping to anticipate, recognise, evaluate and control workplace health risks across the organisation. A key aspect of the role will be driving the continual improvement and standardisation of monitoring, auditing and reporting systems. While this is a development position, it carries a significant level of responsibility and business impact. The successful candidate will play an important role in ensuring compliance with relevant statutory provisions, codes of practice and industry guidelines. The ideal candidate will be passionate about Health & Safety and committed to promoting best practice through effective workforce engagement and education. Occupational Hygienist - Key Responsibilities Include: Work with medic/HSEAs and operational teams to review Health Risk Assessments, identifying the hazard category, hazard, health impact, route of entry and required exposure monitoring/health surveillance program required Deliver occupational hygiene plan associated with exposures and health risks associated with chemical, physical, biological, psychosocial, and ergonomic factors including but not limited to: Hazardous Substance Management and associated COSHH risk assessmentsChemical workplace exposure monitoring for example: Natural gas condensate benzene and other aromatic hydrocarbons e.g toluene, ethylbenzene, xylene. As well as Mercury, lead, chromium III & VI, solvents, cement-based products, welding fume, toxic gasesAsbestos Management and associated surveys, registers including material and priority risk assessment scores and assessment of exposureNoise Management and associated surveys, and assessment of exposureVibration Management, tool tagging/registers and assessment of exposureIonising and non-ionising radiation management and associated local rules and assessment of contamination/exposureThermal hazard assessment, Potable water management, Food borne pathogens, Communicable diseases, Mould & Spores, Animal and insect hazards, DSE, Manual handling, FatigueFurther responsibilities: Recommend and design appropriate control strategiesMonitor and evaluate control strategies e.g. LEV/PPE/RPE testing & inspectionDeliver occupational hygiene training program e.g. asbestos awareness, dust down procedure, use and maintenance of PPE/RPEEnsure adequate assurance processes (inspections and audits) are undertaken of all operational sites (including onshore support centres and NUIs) covering the full range of occupational health and hygiene standards, guidelines and procedures. Ensure coverage of accommodation, welfare and food preparation areas.Ensure calibration systems for occupational hygiene kit are maintainedKey Requirements Include: The successful candidate will complete Perenco's structured Occupational Hygiene development programme, which is designed to support progression towards the BOHS Certificate of Operational Competence in Occupational Hygiene.Occupational Hygienist working towards achieving or achieved BOHS Certificate of Operational Competence in Occupational Hygiene via either Qualifying BOHS accredited degree orCombination of BOHS W & P modulesMinimum 1 years experience in the field of occupational hygiene including knowledge of occupational hygiene measurement techniquesOil & Gas experience desirable but not essentiaRadiation Protection Supervisor experience desirable but not essentialDrive and passion - ability to champion occupational hygiene and workplace health risks throughout the business, including influencing management and the workforce on key topics.Excellent communication skills - ability to present articulately to a variety of forums and through a variety of mediums.Ability to deliver to tight deadlines - produce work to a high standard within agreed delivery datesTPBN1_UKTJ

CLASS 2 (C) ADR CYLINDER DRIVER - NORWICHAre you a Class 2 (Category C) ADR Driver looking for a new opportunity? Join our client's professional team in Norwich and enjoy competitive pay, guaranteed hours, excellent benefits.What's on Offer?£17.45 per hour basic rate£26.10 per hour overtime rateGuaranteed 42.5 hours per week28 days holiday per year , increasing with length of serviceUp to £1,000 in bonuses every 6 monthsMonday to Friday, with some Saturdays during busy periodsTypical working hours: 7:00am - 5:00pmOvertime available and sometimes requiredFree on-site parkingPPE providedFull training and ongoing supportImmediate start availableThe RoleAs a Class 2 (Category C) ADR Cylinder Driver , you will be responsible for the safe and professional delivery of gas cylinders to customers.Your duties will include:Multi-drop delivery of gas cylindersLoading, unloading and manual handling of gas cylindersProviding excellent customer serviceEnsuring deliveries are completed safely and professionallyFollowing company procedures and health & safety standardsComplying with drivers' hours legislation and tachograph requirementsRequirementsValid Category C (Class 2) driving licenceValid Digital Tachograph CardValid CPC qualificationValid ADR Class 2 in PackagesGood understanding of drivers' hours and tachograph legislationProfessional and customer-focused attitudeAbility to carry out manual handling dutiesNewly qualified or inexperienced drivers with the relevant licences are welcome to apply.Important InformationFor insurance purposes:Maximum 6 points on your driving licenceNo DD or DR convictions within the last 12 monthsSuccessful candidates will be required to complete a DBS checkInterested?This is a fantastic opportunity to secure a Class 2 (Category C) ADR driving position with competitive pay and excellent benefits.Ready to apply?Call Manpower on 01132438871Monday-Friday, 8:30am-5:00pmOr simply click APPLY to register your interest!Don't miss out - apply today!If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.TPBN1_UKTJ

Electrical Site Manager Required – Norwich Area Experienced Electrical Site Manager required for a project in the Norwich area. Job Details: Managing electrical works on a live supermarket Overseeing containment and lighting installation Coordinating site operatives and ensuring works are completed safely and to programme Liaising with the client and maintaining site documentation Ensuring compliance with health & safety procedures Requirements: ECS Gold Card (Installation Electrician or Approved Electrician) SSSTS or SMSTS (essential) Valid CSCS/ECS card Asbestos Awareness Manual Handling Working at Height First Aid at Work (preferred) * Experience managing electrical works in live commercial/retail environments Shift: 9:00pm – 4:00am (Night Shifts) Start: Monday Duration: Approximately 2 weeks Rate: £40–£45 per hour (depending on experience). Please get in touch if you're available and interested

VEHICLE TECHNICIAN / VEHICLE MECHANIC Basic Salary: Up to £38,750 Depending on Experience OTE: Efficiency Bonus Available Location: Norwich Hours: 42.5 Hours Per Week – Monday to Friday + 1 in 4 Saturdays Benefits: • Staff Discounts • Cycle to Work Scheme • Staff Events • Stable Workshop Environment • Ongoing Training & Development Opportunities Are you an experienced Vehicle Technician looking for a fresh opportunity within a busy and professional dealership environment? Our client is seeking a motivated and hardworking Vehicle Technician / Vehicle Mechanic to join their established workshop team in Norwich. This is an excellent opportunity for a technician looking to join a supportive business offering strong earning potential and a stable long-term position. Responsibilities of a Vehicle Technician: • Carrying out vehicle servicing, maintenance and mechanical repairs • Diagnosing faults and supporting workshop repair processes • Completing work efficiently while maintaining high workmanship standards • Carrying out repairs in line with manufacturer and safety guidelines • Working collaboratively within a busy workshop team • Accurately completing job cards and service documentation Skills and Qualifications of a Vehicle Technician: • MUST HOLD an NVQ Level 2 or Level 3 in Vehicle Maintenance & Repair • Previous experience as a Vehicle Technician / Vehicle Mechanic within the automotive industry • Good technical and mechanical repair capability • Ability to work efficiently within a fast-paced workshop environment • Own tools and toolbox required • Full UK Manual Driving Licence required If you are interested in this Vehicle Technician vacancy, please contact Kieran @ Auto Skills and quote job number: 49435

Job Title: TIG Welder Location: Norwich Salary: 33-34.5k Our client is looking to recruit a fulltime permanent TIG Welder, the successful candidate will be an experienced welder, with the ability to weld both Stainless Steel & Mild Steel. This TIG Welder position is a manual role for an established fabrication client, based in Norwich Workshop based, assisting in the assembly of fabricated metal products, working with both sheet metal and tubular, welding from detailed drawings. Based within a busy workshop environment, must have real attention to details and able to weld stainless steel materials to a good standard & in a timely manner, due to meeting clients deadlines for completing project. Manual handling – Must be physically fit, as will involve some lifting and moving of completed products , ready for dispatch as required Safety boots / PPE a must Fulltime – Hours are 39 hours a week 07.00am to 15.30pm Mon-Thurs 07.00am to14.30pm Fri Please forward your CV without delay – Immediate starts available

Lift Installation Engineer Norfolk and surrounding areas Role Overview Would you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity? Otis is growing and is looking for an installation Engineer to join the team. Your priority is to ensure the safety of passengers and technical stakeholders by safely installing a portfolio of elevator units. On a typical day you will: Install new elevators with quality and efficiency Work in a safe manner in accordance with all Environmental Health & Safety guidelines. Stay away overnight as and when required Liaise directly with the customer while on site to build a good working relationship Conduct inspection before and after installation to ensure high quality and safety standards What you will need to be successful As a qualified mechanic, it is essential that you have knowledge of elevator equipment and that you can apply elevator engineering principles to Installation. You are qualified to install elevators to NVQ3 level You hold a driver's license You have at least 6 months of experience in the field of elevators, ideally acquired in the assembly activity or at least experience on site and / or installation You have good electrical and mechanical skills. You are comfortable with plan reading and calculations. You have an appetite for technical products and new technologies. You appreciate manual trades as well as the satisfaction of seeing the finished work. What’s In it For Me / Benefits You will receive a long-term employment contract with the world market leader in a crisis-proof industry. We offer you remuneration in accordance with local standards plus: We will train you intensively in the areas of technology & processes and you can exchange ideas with experienced colleagues at any time. You will receive modern and high-quality work clothes, your own tools, an iPhone The health and safety of our employees is our top priority. We promote this through regular training on the subject of occupational health and safety as well as through an employee support program. Apply today to join us and build what’s next

Associate Mechanical OperatorLocation: RAF MarhamDuration: 20 monthsHourly Rate: £21 PAYE or £28.11 via umbrella (inside IR35)Working Pattern: Full-time, onsiteSecurity Clearance: BPSS with SC (subject to ITAR restrictions)About the RoleWe are seeking multiple Associate Mechanical Operators to join our team at RAF Marham. This is an exciting opportunity to work within a highly skilled, multi-disciplinary environment supporting aircraft maintenance and repair activities.In this role, you will carry out metalworking and corrosion remediation tasks on aircraft, contributing directly to operational readiness and safety. You'll work as part of a close-knit team, following approved maintenance procedures and technical documentation.Key ResponsibilitiesPerforming maintenance activities in line with Approved Technical Information and risk assessmentsEnsuring all airworthiness records are accurately maintainedDocumenting all work undertaken and reporting/escalating issues as requiredComplying with organisational procedures, including MOE and associated standardsApplying Safety Management System principles, including human factors and error managementSupporting Continuing Airworthiness Assurance requirementsUndertaking hands-on aircraft work, including:Preparation of metal and composite structures for repairDrilling and reaming of aircraft panels and structuresApplication of adhesive bondingRemoval and installation of aircraft fastenersKnowledge & ExperienceEssential Skills:Experience using manual and pneumatic toolsExperience preparing metal and/or composite surfaces for repairKnowledge of drilling, honing, and reaming techniquesExperience installing and removing aircraft fastenersFamiliarity with adhesive bonding processesKnowledge:General understanding of aircraft structures or mechanical systemsAwareness of team integration and continuous improvement principlesQualificationsEngineering Apprenticeship (ideally Aeronautical Engineering) or military equivalentMinimum NVQ Level 2 (or equivalent)Recognised certifications (e.g. City & Guilds, IMI, Edexcel, EAL, SEMTA, ATA)Equivalent experience supported by formal evidence (e.g. military service records) will be consideredAbout the TeamYou'll be joining a collaborative, supportive team operating in a fast-paced and safety-critical environment, where quality and precision are essential.TPBN1_UKTJ

JLL empowers you to shape a brighter way .Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward.About JLLWe're JLL. We're a professional services and investment management firm specialising in real estate. We help organisations around the world achieve their ambitions by owning, occupying and investing in real estate.If you're looking to step up your career, JLL is the perfect professional home. At JLL, you'll have a chance to innovate with the world's leading businesses, put that expertise into action on landmark projects, and work on game-changing real estate initiatives. You'll also make long-lasting professional connections through sharing different perspectives, and you'll be inspired by the best. We're focused on opportunity and want to help you make the most of yours. Achieve your ambitions - join us at JLL!Business Solutions AnalystWhat this job involves:• Act as the bridge between operational business teams and a technical delivery capability - translating business problems into structured, deliverable solutions that improve efficiency and reduce manual effort across the organisation.• Work directly with operational stakeholders to capture, validate, and document business requirements; convert these into clear user stories and functional specifications that can be acted on by you or the wider delivery team.• Support the design of Power Platform solutions - working with stakeholders and the delivery team to define the right approach before build begins, balancing business need with technical feasibility.• Develop model-driven apps and canvas Power Pages to deliver intuitive, user-facing applications that meet the needs of operational teams.• Create and maintain Power Automate flows to automate business processes, reduce manual effort, and improve consistency across the organisation.• Configure Dataverse tables, forms, and business rules to underpin robust, scalable solutions.• Troubleshoot and enhance existing solutions - maintaining the ongoing health of a live estate of operational automation products and ensuring continuity of service to business users.• Act as the UK-side interface for specification, testing, and sign-off activity, and overseeing quality of delivered solutions.• Identify opportunities for process automation and improvement across operational teams; develop the business case for new builds and manage prioritisation against competing demands.• Stay current with developments in low-code platforms and make recommendations for improvements; act as an advocate for the capability and help business users understand what is possible.Essential• Demonstrable working knowledge of Microsoft Power Platform - including Power Apps, Power Automate, Power BI/Power Query, and SharePoint/M365 - sufficient to understand technical feasibility, review delivered solutions, and challenge specifications.• Expert knowledge of JavaScript and how this is utilised in application creation.• Strong business analysis capability: requirements gathering, user story writing, process mapping, and acceptance criteria definition.• Excellent communication and presentation skills, with the ability to explain complex concepts to non-technical stakeholders and manage expectations effectively.• Experience managing a product backlog or delivery pipeline, with the ability to prioritise competing demands across multiple workstreams.• Strong analytical and problem-solving skills - able to break down complex business processes into structured, actionable components.• Proven stakeholder management skills and the ability to build effective relationships across business lines and with offshore delivery teams.• Attention to detail and a quality assurance mindset - thorough in testing, documentation, and sign-off.• Ability to manage own workload, prioritise effectively, and work with minimal supervision.Desirable• Experience working with property management, financial, or ERP systems (such as Yardi, Dynamics, or similar).• Knowledge of Dataverse - table design, relationships, and security roles.• SQL skills - sufficient to understand data structures and validate data outputs.• Awareness of API integration - understanding of how Power Platform connects to external systems via custom connectors.• Experience working with offshore or nearshore delivery teams.• Experience with agile software development and delivery methodologies.• Qualification/certification in Power Platform/O365 - PL-900, PL-100, PL-300 or PL-600.What you can expect from usWe succeed together and believe the best inspire the best, so we invest in supporting each other, learning together, and celebrating our success.Our Total Rewards programme reflects our commitment to helping you achieve your career ambitions, recognising your contributions, investing in your well-being, and providing competitive benefits and pay.We can't wait to see where your ambitions take you at JLL. Apply today!Location:On-site -Norfolk, GBRIf this job description resonates with you, we encourage you to apply even if you don't meet all of the requirements. We're interested in getting to know you and what you bring to the table!At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing.JLL Privacy NoticeJones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely.For more information about how JLL processes your personal data, please view our Candidate Privacy Statement .For additional details please see our career site pages for each country.Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL.TPBN1_UKTJ

Accelerate Personnel is delighted to be recruiting on behalf of our prestigious client for an experienced and reliable 7.5 Tonne Driver to join their team based in the Norwich area. This is an excellent opportunity for a professional driver seeking ongoing day work, with the potential to secure a permanent position for the right candidate.As a 7.5 Tonne Driver, you will be responsible for completing deliveries of a wide range of products to customers across the UK. You will ensure all deliveries are completed safely, efficiently, and in line with company procedures while providing a high standard of customer service.This role involves regular manual handling, including loading and unloading goods, so candidates must be physically fit and comfortable with heavy lifting.During quieter periods, you will also be expected to assist with general warehouse and yard duties, supporting the wider team where required. Flexibility and a positive attitude towards a varied workload are essential.Key ResponsibilitiesCarry out multi-drop and scheduled deliveries in a safe and timely manner.Load and unload vehicles, ensuring goods are handled carefully and securely.Complete all relevant delivery paperwork accurately.Perform daily vehicle safety checks and report any defects promptly.Deliver excellent customer service at all delivery locations.Adhere to all road traffic legislation, driver hours regulations, and company policies.Assist with warehouse and yard duties during quieter periods.Maintain a clean and professional appearance while representing the company.RequirementsFull UK Driving Licence with valid Category C1 (7.5 Tonne) entitlement.Valid Driver CPC Qualification Card.Valid Digital Tachograph Card.Previous commercial 7.5 Tonne driving experience is essential.Good knowledge of UK road traffic laws and drivers' hours regulations.Physically fit and capable of carrying out heavy manual handling duties.Ability to work independently and manage workloads effectively.Strong organisational and time management skills.Reliable, punctual, and professional with a positive work ethic.Excellent communication and customer service skills.What We OfferOpportunity to secure a permanent position after a successful temporary period.Weekly pay. £13.50 Per HourSupport from a dedicated recruitment team.A varied and rewarding role with a well-established and respected client.If you are an experienced 7.5 Tonne Driver looking for your next opportunity in the Norwich area, we would love to hear from you. Apply today to join Accelerate Personnel and take the next step in your driving career.To apply, please contact Charley, Katie or Melanie at Accelerate Personnel or apply below!Accelerate Personnel acting as an employment businessKeywordsWORK , VAN DRIVER , JOBS , DELIVERY DRIVER , 7.5 TONNE DRIVER , CPC , TACHO CARD , NORFOLK , NORWICH , JOB , NORWICH , DELIVERIES ,TPBN1_UKTJ

We are hiring METER READERS in your postcode now; no experience is required. Are you looking for Full Time work, close to home? Do you like working in an active outdoor role? Do you want to take control of your schedule and work flexibly? If the answer is yes, then this could be the role for you. As a Meter Reader you will be responsible for collecting data from gas, electricity & water meters for both commercial and residential properties. You will update meter reads accurately throughout the day on your handheld device, also entering the details on a handheld device at each location and providing excellent customer service. What we offer: · £13.23 - per hour basic pay (weekly payment) · Weekly Hours 40 - 45 hours a week with flexible start and finish times Monday - Friday (occasionally Saturday) between 8am - 8pm. · £27,000 to £30,000 average annual earnings including bonusses. · Bonus scheme with earnings up to £1000 monthly. · Overtime rates (£16 - £25) at manager's discretion. · Business expenses reimbursed. · Company pension enrolment. · No previous experience required. · Progression and promotion opportunities for higher earnings. · Up to 28 days holiday per year (on an accrual basis). · Full uniform and PPE provided. · Company car. · Full training will be provided. What will you need: · Manual UK Driving Licence - Minimum 1 year, maximum 6 points, NO DR Offences - (driving license is not required in some areas in London) Physically fit and have no issues with bending in tight spaces, lifting or kneeling, climbing stairs, crouching, and walking on average 4-5 miles a day. Happy to work in all weather conditions. Clear DBS check (no unspent criminal convictions) Credit Report check (No county court judgements, IVA, debt relief orders recorded for the last 6 years) 5 years employment history. Previous Customer Service experience (preferred not essential) Duties: Retrieving data from domestic, commercial, and industrial sites for Water, Gas and Electric Meters, full training will be given.· Carry out visual inspections of associated metering equipment. Charge Point Surveys. Drive and motivation to work in an independent role. Friendly personality with a professional approach to work. Adhering to Health and Safety guidelines at all times.Training: Training is 1 week and will be both classroom-based and field-based with an experienced meter reader, so you get to see the job through a professional's eyes. Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corporate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Friendly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Senior Support Worker – Norwich - £14.05 ph Typical Shifts are: Monday - Sunday 7am-2pm; 2pm-9pm; 7am-9pm; 9pm-7am Wake nights Please note that a full UK manual driving license is required as part of this role to drive a person we supports vehicle. Join Voyage Care and Feel Valued, we reward your dedication with: • Enhanced evening and weekend pay at an additional 50p per hour (Ts & Cs apply) • Premium overtime rates at an additional £1 per hour (Ts & Cs apply) • Wagestream – giving you the flexibility to draw upon up to 40% of your pay, as it is earned. • Funded Blue Light Card – hundreds of discounts at high street retailers etc. • 24/7/365 doctor line for our colleagues and their families • Access to cash plans for our colleagues, which also covers their families • Enhanced retirement leave • Long service awards Senior Support Workers with a passion for enhancing the quality of life of the people we support are at the heart of our management teams. We’re currently searching for a fantastic Senior Support Worker to join us in leading our supported living service in Norwich. This service is a welcoming and friendly environment with a dynamic team that supports a fantastic group of people! As a Senior Support Worker with us you'll be helping people to gain more independence in their daily lives, whilst assisting the Manager with the day-to-day supervision and management of the service. You could be allocating shifts, booking in training, inducting new colleagues, supporting with supervision’s, ordering medication and ensuring the people we support are supported to manage their finances. You’ll never lose sight of why you choose to do this, as our Seniors are still at the heart of providing day-to-day support. This is an amazing role for someone who is looking to really make a difference to the lives of others, whether that’s helping our colleagues grow in confidence or the people we support gain independence so that they meet their goals. We’re interested in our Senior Support Workers having both the right experience and the right values. This is why at this service our Seniors should have previous experience as a Senior Support Worker and desirably a Level 3 in Health & Social Care as well as experience working with individuals requiring enhanced support, including behaviour's of distress, mental health conditions, acquired brain injury, autism, potential forensic histories and people who may have experienced trauma. Why choose us? We embrace people’s differences and encourage you to Be You, and so long as you’ve got the passion to make someone’s life better, we can give you all the skills and development opportunities you need to build a great career. We encourage our staff to Grow Together through our excellent training programme, starting at induction and following you through your career, with opportunity for promotion and progression as well as job security in a sector leading organisation. Don't hesitate to apply today and make a real difference to the lives of the people we're supporting! All applicants and subsequent job offers will be subject to satisfactory DBS checks and references

Job Title: Van DriverLocation: Hethersett,NorwichPay Rate: £13.50 to £15.13 p/h£13.50 basic + £1.63 holiday pay = £15.13 totalHours : Monday to Friday (07:00 start times) - Guaranteed 10 hours shiftsFifth WheelRecruitment are looking for Van Drivers to work with our client who are aleading provider of wheeled bin distribution and waste container servicesthroughout the UK.Are you happy with heavy manual handling throughout the day? Can you reliably travel to NR9 3AZ for a 07:00 start?If you answered yes to the above questions, this is the role for you!Employee Benefits:Competitive Salary: £13.50 to £15.13p/h (£13.50 basic + £1.63 holiday pay = £15.13 total)Immediate Starts: Begin earning immediatelyWeekly Pay: Payday every FridayProfessional Development: Full site inductionShifts: Monday to Friday (07:00 start times) - Guaranteed 10 hour shiftsThe role & responsibilities:Driving a Company VanDelivering food waste bins and recycling containers to commercial and residential customers.Customer-facing deliveriesLoading and unloadingbinsChecking Delivery notes and completing manual paperworkThis is a physically demanding role and you will be Customer Facing.About you:We are looking for people with 12 months previous experience in this type of role.You will be a UK resident (we are unable to assist people with VISAs) and will be able to travel to and from the site for your shift.Interested?If you have the right skills for this role, why not click to apply today?TPBN1_UKTJ

My Norwich based client are currently seeking a warehouse operative to join their successful team on an ongoing basis. Key Responsibilities: Loading and unloading deliveries Picking orders accurately Maintaining cleanliness and organisation in the warehouse Assisting with stock control and inventory checks Following health and safety procedures at all times Requirements: Previous warehouse or manual handling experience is essential Good level of physical fitness – some heavy lifting involved Reliable, punctual, and a team player If this feels like the next exciting opportunity for you please send an up to date CV to (url removed) or call (phone number removed)

Accelerate Personnel are actively recruiting on behalf of our client for a HGV 1 Driver for night work based in the North Norwich area.The role will involve afternoon/evening start and working through the night. You will be driving a Class 1 vehicle involving hub runs and/or deliveries to various locations within the UK.All drivers must be aware of safe loading and unloading, have good customer service and a flexible approach to work.We can offer both ad-hoc and ongoing assignments, working closely with our drivers to offer flexibility and accommodate hours and shifts to suit your needs.Requirements:Full driving licence with valid Category C+E Licence / Class 1 EntitlementValid CPC CardValid digital Tachograph CardMust be prepared for manual handlingWhat Accelerate Personnel can offer:£16.00 per hour and £24.00 per hour overtime after 8 hours8 hours minimum guaranteed pay per day20 days plus bank holiday paidWeekly payDedicated driving team available 24/7 on callDriver referral schemeFor more information get in touch with Katie, Charley or Melanie at Accelerate Personnel.Alternatively, hit the Apply button now!Accelerate Personnel acting as an employment businessKeywordsclass 1 night driver , driving , work , hgv 1 , nights , driving , hgv , truck , trucks , cpc , tacho card , class 1 , norfolk , norwich , jobs , job ,TPBN1_UKTJ

Commercial ElectricianSalary: Up to£50,000 per year DOEAbout the RoleOur client is seeking an experienced Commercial Electrician to join their growing team, working across commercial and industrial sites on a range of exciting projects involving solar PV systems.This is an excellent opportunity for a qualified electrician looking to expand their skills within the renewable energy sector. Previous solar experience is not required, as full training and ongoing support will be provided.Key ResponsibilitiesInstall, gland and terminate SWA cables to a high standard.Construct trunking, cable tray and conduit systems that are level, secure and compliant with industry standards.Carry out LV distribution work, including panel board connections, isolators, MCCBs, RCBOs, metering and labelling.Perform inspection and testing activities, including dead and live testing, and accurately complete EIC and EICR certification.Support solar PV installations, including inverter AC terminations, CT installations and communications power connections, with full training provided.Interpret schematics, cable schedules and method statements, while planning materials and proactively identifying potential issues.Maintain the highest standards of health and safety, including safe isolation procedures, permits to work, working at height, manual handling and compliance with site RAMS.Represent the client professionally on site, maintaining excellent workmanship and a positive attitude.Candidate RequirementsNVQ Level 3 in Electrical Installation (or equivalent) and 18th Edition (BS 7671).Competence in inspection and testing, supported by City & Guilds 2391 or 2394/2395 qualifications, or demonstrable equivalent experience.Proven experience installing and terminating SWA cables, as well as carrying out trunking and traywork within commercial or industrial environments.Confidence in conducting and interpreting electrical tests, including continuity, insulation resistance, polarity, Zs/Ze and RCD testing.Ability to produce accurate test documentation, certification and as-built records.Valid ECS or CSCS card.Full UK driving licence.Desirable Skills and QualificationsThe following are advantageous but not essential:Experience with PV inverters, AC distribution systems for solar installations, or metering and CTs.Knowledge of grid protection systems, including G99/G100 requirements and interface relays.IPAF, PASMA, First Aid or SSSTS certification.What's on OfferCompetitive salary with overtime opportunities.Company vehicle, tools and PPE provided.Full training and support to develop solar PV expertise.Clear progression opportunities into Lead Electrician, Supervisory or Solar Maintenance roles.A supportive, high-performing team environment with a strong focus on quality and professional development.Working ArrangementsPermanent, full-time or part-time opportunities available.Monday to Friday, with occasional evening or weekend work on a rota basis.Regional travel required, including occasional overnight stays depending on project locations.This is a site-based role.Equal OpportunitiesOur client is an equal opportunities employer and welcomes applications from all suitably qualified individuals, regardless of age, disability, gender reassignment, marriage and civil partnership status, pregnancy and maternity, race, religion or belief, sex or sexual orientation.All recruitment decisions are based on merit, skills and business needs. Reasonable adjustments are available throughout the recruitment process.BenefitsCompany carTPBN1_UKTJ

Band 3 Care Team Leader – Norwich Location: Norwich, Norfolk & Surrounding Areas (NR1–NR25) Job Type: Full-Time | Part-Time | Agency | Flexible Shifts Shifts: Days | Nights | Weekends Pay: Competitive Agency Rates | Weekly Pay Experienced Care Team Leaders Wanted – Norwich HCR Recruitment is recruiting experienced Band 3 Care Team Leaders across Norwich and surrounding areas. This is an excellent opportunity for care professionals with strong leadership skills who are passionate about delivering high-quality, person-centred care. The Role As a Care Team Leader, you will support the smooth running of care services, supervise care staff and help maintain excellent standards of care. You will provide guidance to team members while ensuring service users receive safe, personalised and dignified support. Key Responsibilities Lead, support and supervise care staff to deliver high-quality care. Allocate daily tasks and coordinate the care team effectively. Support new and existing team members through guidance and mentoring. Provide hands-on care and assistance with daily living activities when required. Administer medication safely in line with care plans and company procedures. Support safe moving and handling practices. Monitor service users' wellbeing and report changes appropriately. Maintain accurate care records, documentation and daily reports. Promote dignity, respect, independence and person-centred care. Work collaboratively with healthcare professionals, families and support teams. Follow safeguarding, health and safety and care standards. Essential Requirements Minimum 2 years' UK experience within a healthcare or social care setting. Previous experience leading or supervising a care team. Experience with medication administration. Experience with manual handling and safe moving techniques. Strong leadership, communication and organisational skills. Ability to support, motivate and guide team members. Reliable, compassionate and committed approach to care. Right to work in the UK. What We Offer Competitive Care Team Leader agency pay rates. Flexible Team Leader shifts to suit your availability. Full-time and part-time opportunities. Opportunities across care services in Norwich and surrounding areas. Uniform, ID badge and compliance support. Dedicated recruitment consultant support. Weekly pay. * Career development and progression opportunities. Apply Now If you are an experienced Care Team Leader looking for a rewarding agency opportunity across Norwich, Norfolk and surrounding areas, apply today. Important: HCR Recruitment does not provide Skilled Worker Visa Sponsorship for this role. Applicants must already have the legal right to work in the UK. Equal Opportunities: HCR Recruitment is committed to equality, diversity and inclusion and welcomes applications from all suitably qualified candidates

Fully Remote | Flexible Hours | Fee-Split Model Join a Forward-Thinking Boutique Firm Are you an experienced Residential Conveyancer looking for more than just another conveyancing role? Do you find that your clients and referrers are choosing you, not necessarily the firm you work for? If that sounds familiar, it might be time to consider a consultancy model – and start earning up to 75% of the fees you generate. Many lawyers have already made the move to consultancy, and it’s transforming the way they work, and the money they earn. At FDR, we specialise in helping conveyancers make that transition with confidence. Choosing the right firm can feel daunting – even isolating – but that’s where we come in. We're a small, forward-thinking boutique firm that offers more than just a platform. Here, you’re not just another number. Your voice matters, your work is appreciated, and your growth is genuinely supported. We’re a close-knit, modern legal practice giving experienced conveyancers the chance to take full control of their careers – with the very best technology to back you up. You’ll have direct access to senior leadership, streamlined systems, and the freedom to work how and when it suits you. Why Join Us? • Personal Support, Not Just a Platform, • We don’t leave you to figure things out alone. You’ll get real support to grow your business – with marketing help, mentoring, and a community of like-minded consultants who share insights and success., • Work on Your Terms, • Remote working, flexible hours, and total autonomy over your caseload. It’s your practice, built your way – under a clear, fair fee-split model., • Big Tech, Small Firm Feel, • We’ve invested in Salesforce – a game-changer in legal tech and rarely used by firms of any size. Thanks to the backing of our parent company, the AIIC Group, we have access to cutting-edge systems that mean fewer manual tasks, significant time savings, and a smoother experience for you and your clients., • You’re Heard and Valued, • In our compact team, you’ll have a direct line to leadership (including the CEO) and the ability to help shape how the firm evolves. We listen, and we act on what matters to you., • Full Support, Without the Red Tape, • Benefit from the financial security, compliance guidance, and admin support that comes from being part of the AIIC Group – without sacrificing your independence or flexibility. What We’re Looking For: • A qualified solicitor, licensed conveyancer, or legal executive with experience in residential property, • Confident in managing your own caseload from instruction to completion, • Tech-savvy and excited by smarter, more efficient ways of working, • Self-motivated and ready to grow your own client base with full backing, • Looking for true flexibility, with the support of a professional and collaborative team Ready to build a career on your terms – with the tools, support, and autonomy to thrive? We’d love to hear from you. Contact us today for a confidential chat with one of our Recruitment Executives. P.S. Our Legal Consultancy Programme does not require a set number of years PQE, however you need to be practising and legally qualified in England and Wales in Property law, and able to generate your own instructions. Contact us now to see if you qualify.

Job Description We are looking for a Delivery Driver to join the Frontier team, based at Honingham on a permanent basis. Delivering and based at our Honingham site, and occasionally delivering from our Ingham and Diss sites. You will be carrying out day-to-day activities of the site; to assist in the delivery of high standards of safety, quality and operations whilst being a part of a team that operates with integrity and accountability while delivering a high standard of customer service. The Benefits • Competitive salary, • 25 days holiday per calendar year with option to purchase up to 5 more days (subject to meeting eligibility requirements), • Dedicated Learning & Development team to support you and your career, • Employee Assistance Program providing 24 hours support & advice in areas such as health and wellbeing for yourself, your family & friends (up to 5 people in total), • Increased Maternity, Paternity & Adoption leave benefits for eligible employees, • Life Assurance scheme and pension plan with employer contributions of up to 7%, • Up to two days paid volunteer leave per year (only applicable to permanent employees), • The opportunity to join our employee network groups including LGBTQ+, Menopause wellbeing, Neurodiversity and Womens network groups., • Cycle to Work Scheme, employee retail discount scheme and free eye test vouchers About You • Good communicator with the ability to consult with all team members and site management team, • Able to work under pressure and to deadlines whilst maintaining Frontiers ICE values, • Adapts quickly and successfully to accommodate changing business and customer needs, whilst providing a responsive customer focussed service, • Works to accommodate the seasonal nature of Frontiers business, • Adopts a customer first mindset while ensuring that compliance is maintained at all times that where relevant all internal procedures are adhered to at all times, • The ability to work collaboratively with others and to work independently at times without supervision, • A full UK driving license + Category C driving licence, • ADR & CPC (can be provided for the right candidate), • Forklift Truck Licence (Counterbalance and/or Reach Truck desirable) Your Role As a Delivery Driver your role will involve: • Correctly delivering a range of agricultural products to farm (manual handling will be required), • Working with our office and stores teams to pick and plan delivery routes, • Conducting vehicle checks, • Maintaining high standards of customer service whilst being the face of the company, • A strong focus on Health and Safety, • Assisting in all sites operational areas outside of peak times, • Assisting with the loading and unloading of vehicles, ensuring goods are handled safely and accurately, • Undertaking any other reasonable duties as requested by the Line Manager to support the needs of the business We encourage candidates to submit their applications as early as possible and not to wait until the published closing date as applications will be reviewed and interviews may be booked in before that date. We reserve the right to remove this advert or close it to further applications at any point during the recruitment process. About Us Frontier is a successful and growing business. We are the largest crop production and grain marketing company in the UK, with over 1,000 employees and a turnover of more than £1.5 billion. With a vision to be the first-choice employer in UK agriculture, we are committed to delivering a culture where people are at the heart of our success. Our business approach is underpinned by our core values Integrity, Customer First and Expertise or ICE. These values support our whole philosophy and way of working and we are always looking to attract talented individuals with either industry knowledge or specialist skills that will help us deliver consistently to these values. Commitment to Diversity and Inclusion We have a clear commitment to equality of opportunity and diversity encouraging fairness and equality of treatment for all. As such we encourage applications from all backgrounds. We recognise the value of a workforce in which people from diverse backgrounds are encouraged to introduce fresh ideas and contributeto the business goals. We are committed to providing a diverse and inclusive environment with inclusive employment policies, such as progressive flexible working and parental policies. JBRP1_UKTJ

BAM Ground Engineering Drill & Blast Department have an exciting opportunity for an experienced Quarry Driller; this is an opportunity for an enthusiastic and professional individual. BAM Ground Engineering Drill & Blast Department are an industry leading company within the extractives industry providing fully integrated blasting services, for government organisations, local authorities, main contractors, utilities, and public/private companies. This position can be based across the Central Belt of Scotland or the East Midlands (Cumbria, Lancashire, and Leicestershire). Making Possible As a Quarry Driller, you will be responsible for the following: • This will be a hands-on role operating drilling rigs, maintaining equipment and working alongside our blasting teams to deliver safe, efficient results., • Maintaining the very highest standards of health and safety, quality, and professionalism at all timesWhat do you bring to the role?, • Although, previous experience in quarry drilling industry is not essential, it is desirable that the candidate have experience working outdoors, preferably in a construction environment., • Valid CSCS Card (Construction Skills Certification Scheme), • Full clean driving licence, • Emergency First Aid At Work Training (One Day), • Manual Handling Training, • Experience in working on construction sites, • The ability to work well with others, • Strong communication, motivational skills and attention to detail, • Ability to work flexible hours + weekends, including some overnight stays away from homeWhats in it for you?, • Competitive salary, • A wide range of family-friendly policies, • Pension contributions, • Life assurance, • 23 days holiday, • 2 wellbeing days, • 1 volunteering day, • Personal and professional developmentAbout BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. JBRP1_UKTJ

Are you an experienced Machine Build Engineer, Automation Engineer, Mechanical Fitter or Electro-Mechanical Engineer looking for your next challenge? Do you enjoy building bespoke automation equipment from the ground up, working closely with design engineers and seeing your work progress from concept through to commissioning? We're supporting a leading precision engineering manufacturer in Portsmouth who are looking to recruit a Senior Machine Build Engineer to join their Automation team. This is an exciting opportunity to work on the design, build and commissioning of bespoke automated manufacturing equipment that supports cutting-edge production technology. What's the role all about? As a Senior Machine Build Engineer, you'll take a leading role in building and commissioning special purpose automation machinery used within a high-tech manufacturing environment. Working alongside Mechanical, Electrical, Controls and Software Engineers, you'll build complex automated systems from engineering drawings, assist with machine development and play a key role in machine proving and commissioning before release into production. This is a varied, hands-on engineering role where no two projects are the same. Key responsibilities • Build bespoke automation and special purpose machinery from engineering drawings, • Assemble complex mechanical sub-assemblies to high precision standards, • Carry out electrical cabinet wiring, machine hard wiring and electrical testing, • Install and configure pneumatic systems and associated control equipment, • Work closely with Design Engineers on new automation and R&D projects, • Assist with machine proving, testing and commissioning activities, • Support Software Engineers during machine sequencing and commissioning, • Diagnose and resolve mechanical, electrical and pneumatic faults, • Lead specific machine build projects from assembly through to final handover, • Work to project deadlines while maintaining exceptional quality standards, • Maintain accurate build documentation and support ERP processes, • Promote safe working practices and maintain high housekeeping standards What you'll need To succeed in this role, you'll bring: • Proven experience building special purpose machinery or factory automation equipment, • Strong mechanical assembly and machine fitting experience, • Ability to read and interpret engineering drawings, assembly drawings and GD&T, • Experience with electro-mechanical assembly, • Electrical wiring, terminating and fault-finding experience, • Good understanding of pneumatic systems, • Experience with manual workshop machinery including mills, lathes and grinders, • Strong problem-solving skills and attention to detail, • Ability to work independently and as part of a multidisciplinary engineering team Desirable • Experience working with PLC-controlled machinery, • Knowledge of motion control systems, sensors and vision systems, • Machine commissioning and validation experience, • Design for Manufacture (DFM) and Design for Assembly (DFA) knowledge, • Root Cause Analysis experience, • Experience using ERP systems such as IFS, • HNC/HND or Apprenticeship in Mechanical or Electrical Engineering About you You're an experienced engineer who enjoys taking ownership of complex machine builds and solving technical challenges. You'll be: • Hands-on and technically capable, • Detail-focused with high-quality workmanship, • A proactive problem solver, • Comfortable working to project deadlines, • A collaborative team player, • Passionate about automation and engineering innovation Why join? This is a fantastic opportunity to join a growing engineering business investing heavily in automation, technology and advanced manufacturing. You'll work on bespoke machinery, collaborate with experienced design and software engineers, and play a key role in delivering innovative automation solutions that support world-class manufacturing. Benefits • Competitive salary, • 25 days holiday plus bank holidays, • Additional 3 days off over the festive period, • Company bonus scheme, • Company pension, • Life Assurance (3x salary), • Employee Assistance Programme, • Cycle to Work Scheme, • Ongoing training and career development Interested? If you're an experienced Machine Build Engineer, Automation Engineer, Mechanical Fitter, Electro-Mechanical Engineer or Commissioning Engineer looking for your next opportunity, we'd love to hear from you. Apply today or contact us for a confidential discussion. Kingdom People are acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ

Description At the heart of Paxton, we are innovators, we look for ways of harnessing new technology to provide better solutions for our customers. We're a global brand with nearly 40 years of experience, our team of over 400 employees is spread around the world. We pride ourselves on creating a vibrant environment, with a focus on excellent company culture. Our teams make Paxton a great place to work with brilliant benefits that come with any role at Paxton, with an emphasis on career progression, training and development, and recognition of achievement for every employee. So, what are the benefits? • We run a great social calendar with wine tasting, cooking classes, onsite yoga, staff parties, monthly internal events and more. Its rare you wont see something going on!, • Private medical insurance (Opt in) and healthcare cash-back plan with Health Shield., • Join a Carbon Neutral company Paxton is Carbon Neutral in the UK, France, Germany & South Africa!, • Modern offices, collaboration spaces, onsite mini-gym, and a gourmet café with subsidised food., • Discounted fitness memberships up to 75% off in your area with GymFlex., • Get involved with collaborative internal groups like our Green Team, EDI Team and the Charity Team., • Tech, bike, and travel or season ticket loans., • 25-days holiday plus bank holidays, and you can buy & sell up to 5 days a year., • Recognised as one of the Best Companies to Work for in the UK, by Best Companies. About the role Join our Electronics Assembly team in our new state of the art facilities based in Brighton. This is a fantastic opportunity for someone that is looking to start or continue their career working within electronics manufacturing. In this role, you will work through the build process of PCBs, working closely with our automated Surface Mount Technology machines. • Using PCB layouts, Bills of Materials (BOM) part lists and written instructions to assemble, rework and/or reassemble units and sub-assemblies., • Picking and kitting of the materials to Pick & Place Feeders and subsequent loading of the kitted trolleys., • Operating automated and manual assembly equipment such as Pick and Place, Solder Screen Printer, Re-flow Oven, Automated Optical Inspection (AOI) and Selective Solder equipment., • Break-out and testing of all PCBAs using our inhouse test systems. This is a day shift position with the hours Monday - Friday 10am - 6pm. What are we looking for? • A team player, someone who can openly communicate and provide honest collaboration in an effective way., • Previous experience in a machine operative or role within an SMT or PCBA manufacturing faciliity., • Some that has a genuine interest in technology and how things are made, and the willingness to learn all the process it takes to build our PCBs., • A strong ability to pay attention to the detail is key to this role, along with the desire to look for improvements in the processes and quality standards. The right attitude is more important to us than your skills or experience. If youre excited about a role but your existing experience doesnt match up with every element of the job description, we encourage you to apply anyway. We want to collaborate with you and hear your ideas, most of all, we want people to enjoy the journey with us. Take a look at what our team thinks of working here https://www.youtube.com/watch?v=8WH7Pi3--zc JBRP1_UKTJ

Flexible hours available this includes job shares/ amended hours, we will consider all. Offering a work/life balance is of great importance to Speedy! Role - Driver 3.5ton plus towing Location - Belfast Days of work - Mon - Fri, Times -07:30 - 17:00, 42 hours per week Speedy are the UKs leading hire provider with the widest range of tools, specialist hire equipment, plant and support services everything for every job! Based in Belfast, the role of Delivery Driver is a busy and productive role. You will be driving a 3.5 ton flatbed van with towing, delivering hire equipment around the local area.This role is vital to our operation; you will be the face of our business and a representation of our vision, mission and values. What youll need: • Driving licence with towing, • Good knowledge of the local area, • Strong customer focus, • Experience driving within the UK, • Ability to support your business unit/team to deliver our ESG Strategy Decade to Deliver. A bit about you: • Upbeat, independent and self-motivated, • Think of yourself as a people-person, • Happy walking for long periods and going outside in any weather, • Strong sense of community and take pride in what you do, • Has a full UK manual driving licence with no more than 6 penalty points What we offer: • 26 days holiday (plus bank holidays), • Life assurance, • Pension Scheme, • Canteen facilities, • 95% discount across the Speedy brand, • Opportunities for training, development and career progression, • Voluntary Health Cash Plan, • My Staff Shop: discounts and offers for shopping etc. across many suppliers, • Green Commute Initiative: Work scheme for cycling, • PAM Employee Assistance Program (EAP): Offers free and confidential support and counselling to help you through matters such as wellbeing, divorce, legal, and financial management Speedy operates an industry leading Work Life Balance initiative, demonstrating our commitment to reducing core contracted hours, supporting colleague wellbeing, and identifying more balanced work patterns for our colleagues which is a huge step in realising our ambition of putting our People First. Talk to us about a range of hybrid and flexible working arrangements to suit your needs including flexible start/finish times, shorter days, term time hours and job share opportunities. Speedy offer a Career Line of Sight which enables a detailed understanding of the route to progression and growth within the Speedy Group. Please be aware Speedy reserves the right to close our vacancies earlier than the listed date if we have received a high level of applications. We would recommend that if you wish to be considered that you complete the application as promptly as possible. Please be aware that some roles withinThe Speedy Group UK&I may require a DBS, Credit or Security Clearance Check.The Speedy Group is an equal opportunity employer where we embrace diversity in all its forms and fostering an inclusive environment for all people to do the best work of their lives with us. Link below to our policies in line with our ESG Governance. https://www.speedyservices.com/esg/governance All applicants will be considered for employment without attention to ethnicity, religion, sexual orientation, gender identity, family or parental status, national origin, veteran, neurodiversity status or disability status. All roles within The Speedy Group require proof of right to work in the UK by the start of employment. JBRP1_UKTJ

TPS Parts Sales Executive Who are TPS? TPS provides independent garages and bodyshops with the high-quality Genuine Parts and products which customers need to ensure they can service and repair Volkswagen Group vehicles. TPS is part of the Volkswagen Group along with Audi, SEAT, KODA, Volkswagen passenger cars and Commercial Vehicles. TPS is a national network of TPS Centres with a 1,500-strong national workforce and a management team that prides itself on creating an environment that offers our people a motivating and inclusive workplace where they are recognised and rewarded and are encouraged to go on a journey of Learning and Development. Nationally launched as a new brand concept in 2006, TPS is based on an Agency Model; this means that Centres stock and sell on behalf of Volkswagen Group UK. TPS has continued to experience rapid growth both financially and in the number of Centres opened nationwide. About the Role What will you be doing? As a Parts Sales Executive you will be working with the Sales Manager and team to deliver and achieve the business plan and sales objectives of the Centre • Achieve personal KPIs and revenue objectives with target customers, • Accurately identify parts to meet the customer sales requirements, • Utilise all product promotions effectively to achieve specific targets set, • Identify and leverage potential sales opportunities within customer base, • Maintain own product knowledge and awareness of competitor activity, • Build strong working relationships with customers through regular contact with them on the phone and via face to face visits, • Provide a high level of service to customers - through understanding their requirements, responding to requests, progressing orders and providing expert advice, • Provide timely communication to customer on their credit status, • Assist, liaise with and support the TPS Centre team to ensure good working relationships and delivery of excellent customer service, • Work with the Sales Manager and others to achieve sales targets and provide a joined-up approach to sales, • Handle incoming calls and customer enquiries within KPIs, using the approved greeting, • Ensure the proper and accurate use of all systems to search and order parts, • Complete all required documentation accurately and promptly, • Deal with all cash and credit card transactions in line with TPS Guidelines in the Operations Manual Requirements What are we looking for? • A self-starter with a proven track record in building strong relationships and achieving sales targets in a B2B environment, • Confident and capable communicator with proven experience of selling in a fast paced and/or telesales environment, • Passion for providing a great customer service experience, • Excellent communication skills both verbally and written with the ability to build strong relationships with all key stakeholders, • A team player with the drive and determination to achieve individual and sales targets on a weekly & monthly basis, • Excellent attention to detail and accurate record-keeping, • IT literate, preferably with a good working knowledge of MS Excel, • A passion for the automotive industry JBRP1_UKTJ

Contract Personnel are recruiting for 3.5 Tonne Drivers for a local removals and storage company in Norwich. 3.5 Tonne Drivers are required to carry out removals and clearances at domestic and commercial properties across the region. As a 3.5 Tonne Driver you will be required to do a high degree of lifting and manual handling, Customer interaction and work as a 2-3 person team with Drivers Mates. Drivers Must Hold: Full Valid Driving Licence with category B Entitlement An understanding of Road Traffic Laws Good local Geographical Knowledge Benefits of working with Contract Personnel: Designated Driving Team 30 Years of Industry Experience Rates you Deserve PAYE Scheme Holiday accrual Weekly Pay Our Honest Approach 24/7 Service Driver Referral Scheme We work closely with all our Drivers finding the right work for you and your current situation. For further information on this role or to register with us, please don’t hesitate call The Driving Team on (phone number removed) or email . Alternatively take advantage of our open-door policy, come to our office to meet the Team and get registered

CLASS 2 (C) ADR CYLINDER DRIVER - NORWICH Are you a Class 2 (Category C) ADR Driver looking for a new opportunity? Join our client's professional team in Norwich and enjoy competitive pay, guaranteed hours, excellent benefits. What's on Offer? £17.45 per hour basic rate £26.10 per hour overtime rate Guaranteed 42.5 hours per week 28 days holiday per year, increasing with length of service Up to £1,000 in bonuses every 6 months Monday to Friday, with some Saturdays during busy periods Typical working hours: 7:00am - 5:00pm Overtime available and sometimes required Free on-site parking PPE provided Full training and ongoing support Immediate start available The Role As a Class 2 (Category C) ADR Cylinder Driver, you will be responsible for the safe and professional delivery of gas cylinders to customers. Your duties will include: Multi-drop delivery of gas cylinders Loading, unloading and manual handling of gas cylinders Providing excellent customer service Ensuring deliveries are completed safely and professionally Following company procedures and health & safety standards Complying with drivers' hours legislation and tachograph requirements Requirements Valid Category C (Class 2) driving licence Valid Digital Tachograph Card Valid CPC qualification Valid ADR Class 2 in Packages Good understanding of drivers' hours and tachograph legislation Professional and customer-focused attitude Ability to carry out manual handling duties Newly qualified or inexperienced drivers with the relevant licences are welcome to apply. Important Information For insurance purposes: Maximum 6 points on your driving licence No DD or DR convictions within the last 12 months Successful candidates will be required to complete a DBS check Interested? This is a fantastic opportunity to secure a Class 2 (Category C) ADR driving position with competitive pay and excellent benefits. Ready to apply? Call Manpower on (phone number removed) Monday-Friday, 8:30am-5:00pm Or simply click APPLY to register your interest! Don't miss out - apply today! If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website

Senior Embedded Software Engineer Location: Norwich, Norfolk Salary: Competitive + Benefits About the Opportunity KO2's client, an innovative engineering company developing advanced systems, is seeking an experienced Senior Embedded Software Engineer to join its growing team in Norwich. This is an excellent opportunity to play a leading role in the development of next-generation technologies, working on complex embedded software solutions. The successful candidate will take ownership of software architecture, development, integration, and validation activities while providing technical leadership within a multidisciplinary engineering environment. Working closely with systems, controls, hardware, and test engineers, you will help deliver robust, high-quality software solutions and contribute to the future direction of cutting-edge products. Key Responsibilities Define, develop, and maintain robust software architectures aligned with system and product requirements. Provide technical leadership and mentorship to software engineers, promoting engineering excellence and continuous improvement. Drive software development processes, tools, methodologies, and ASPICE-aligned practices. Manage the complete software development lifecycle, from requirements capture through implementation, verification, validation, and release. Plan and deliver software milestones, ensuring effective documentation, progress tracking, risk management, and change control. Develop high-quality embedded software using model-based design, auto-code generation, and manual coding techniques where appropriate. Support the development and optimisation of control algorithms to meet performance, safety, reliability, and quality objectives. Lead software integration activities across embedded hardware platforms and system architectures. Collaborate with multidisciplinary engineering teams to define interfaces, requirements, and integration strategies. Support prototype development, system integration, and validation activities including bench testing, Hardware-in-the-Loop (HIL), and dynamometer testing. Perform root cause analysis and contribute to effective problem resolution and corrective actions. Define and oversee software verification and validation strategies, ensuring full traceability between requirements, implementation, and testing. Conduct software design and code reviews, ensuring compliance with quality and coding standards. Champion continuous improvement in development tools, automated testing, continuous integration, configuration management, and software processes. Support compliance with relevant safety, quality, and regulatory standards. Contribute to future product development and innovation within electric drive technologies.About You You will be an accomplished embedded software engineer with a strong background in real-time control systems and electrified powertrain technologies. You will enjoy solving complex technical challenges and have experience leading software development activities within multidisciplinary engineering environments. Essential Skills & Experience Strong experience developing embedded software for electric drive systems and real-time control applications. Expertise in motor control algorithms, inverter control, DC-DC converter control, diagnostics, and embedded application software. Proven experience defining software architectures and leading software development projects. Strong knowledge of the complete software lifecycle, including requirements management, design, implementation, verification, validation, release, and configuration management. Experience leading and mentoring engineering teams while delivering high-quality software solutions. Knowledge of software verification and validation techniques, including unit testing, integration testing, HIL testing, and system-level validation. Excellent collaboration skills with systems, hardware, controls, and test engineering teams. Familiarity with industry standards and best practices including: ISO 26262 MISRA C ASPICE Functional Safety principlesWhat's on Offer? Opportunity to work on cutting-edge electric drive and electrification technology. A key technical role with significant influence over product development and software strategy. Collaborative engineering environment with strong opportunities for career progression. Competitive salary and benefits package. The chance to contribute to innovative products that are helping shape the future of electrified systems.To find out more or apply for this opportunity, please contact KO2 Recruitment

We are looking for someone who is a team worker, happy with outdoor manual work, and can deliver a high standard of customer service. What You’ll Be Doing Providing helpful, friendly assistance to customers using the recycling facilities Carrying out manual handling tasks safely and efficiently Maintaining a clean, organised, and safe working environment Supporting colleagues with general site duties as required Completing any necessary training to develop your skills Occasionally assisting at other local sites when needed What We’re Looking For Must drive due to location of site Confident with manual handling and comfortable working outdoors A positive, proactive attitude with strong customer service skills Reliable, hardworking, and a genuine team player Access to your own transport (essential due to site locations and travel requirements) Job Details Location: Norwich area Hours: 8:45am – 4:15pm Rota: Monday to Sunday (weekly bookings available) Updated Pay Rates: £12.71/hour – Monday to Friday £15.88/hour – Saturday £19.06/hour – Sunday Contract Type: Temporary ongoing Why Work with Hales Group? When you join Hales Group as a temporary worker, you’re supported by a team of experienced, dedicated consultants who genuinely care about finding the right role for you. We offer: Holiday pay Expenses scheme Personal accident insurance Pension scheme Access to future job opportunities We also retain basic application details to support equal opportunities monitoring and to share suitable roles with you in the future. If you prefer us not to keep your information, simply contact your local branch

Job Title: Installations Engineer Engagement: Full-time, permanent Location: Norwich ⌚ Working hours: 08:50 - 17:40 Salary: Up to £40,000 About the role You will provide support to our customers, working across an array of different technologies and setups. Whether it’s over the phone, through remote assistance, or on-site at the customer offices, you’ll handle each case with efficiency and professionalism, showcasing your excellent customer service skills Within the business, you will play an instrumental part in providing IT support to over 5,000 end users. Our team operates within the framework of ISO-accredited policies, priding ourselves on ensuring that excellence is our standard and continually seeking improvements. As part of the role, we operate a shift schedule that provides flexibility and allows a balance of working in our office and working from the comfort of a remote location. What you’ll do • Planning, installing, and documenting IT systems and networks for customer projects of varying scale and complexity, • Delivering end-to-end project work — from initial planning through to successful, on-time completion, • Attending customer meetings and acting as a confident, professional point of contact throughout the project lifecycle, • Managing your own caseload and keeping accurate records using our systems (including Microsoft Dynamics and Halo PSA), • Carrying out server work, networking tasks, Microsoft 365 deployments, and telephony installations, • Collaborating with internal teams to understand customer needs and ensure smooth project delivery, • Identifying and highlighting opportunities for customer improvements, working with Account Managers and other departments, • Working with and guiding fellow team members, sharing knowledge and supporting project delivery as a team, • Upholding health & safety standards and adhering to our ISO accreditations (ISO 9001 and ISO 27001) What you’ll bring • At least 3 years of experience working within an internal or outsourced IT department, • Strong knowledge of Microsoft Server Operating Systems, • Solid understanding of Microsoft 365 products and their deployment, • Knowledge of firewalls and IPsec tunnels, • Understanding of IP-based networks and VLANs, • Full clean manual driving licence We'd expect candidates to hold, or be working towards, the following: • CompTIA A+, • CompTIA Network+, • Microsoft Certified Expert certification What we offer • 25 days leave + bank holidays, • Your birthday off, • Company Pension, • Private medical, • Gym membership, • Cycle to work scheme, • Endless learning opportunities Who we are Acora One is a trusted UK technology partner dedicated to helping small and medium-sized businesses thrive through reliable, secure, and scalable IT solutions. Backed by the expertise and resources of Acora Group, Acora One delivers comprehensive managed IT services, cybersecurity, cloud solutions, connectivity, telephony, and business continuity support tailored to the needs of growing organisations. Our values #1 Be the best you can be #2 We do what we say #3 Together we win Interested in becoming an Acoran? Check out the link to our website to read more about us - Homepage - Acora ONE To be considered for this position, you must have full rights to work in the UK. Equal Opportunities at Acora Group Acora Group are an equal opportunity employer, committed to providing equal opportunities regardless of race or ethnic origin, gender identity, family situation, sexual orientation, disability, religion or age. We hire our people based on qualifications, merit, skills, and business need. We are a Level 1 Disability Confident Committed Employer and will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, perform essential job functions, and receive equitable benefits and all privileges of employment. Please contact us to request any reasonable adjustments. Join us at Acora in creating a workplace where everyone can succeed and make an impact. We look forward to welcoming you to our team

NES Fircroft are recruiting an Occupational Hygienist for a major Oil and Gas Operator on an initial 2 year contract. This is a great opportunity for someone with 1+ years experience to join their dedicated QSSHE team where you will be responsible for the delivery of the Occupational Hygiene program. This is a Mon-Fri, 37.5hrs per week role based in the Norwich office. Occasional visits to operational sites. The successful candidate will complete a structured Occupational Hygiene development programme, which is designed to support progression towards the BOHS Certificate of Operational Competence in Occupational Hygiene Overview: The role will support the delivery of the Occupational Hygiene and Human Factors programme across the client's Southern North Sea operations, helping to anticipate, recognise, evaluate and control workplace health risks across the organisation. A key aspect of the role will be driving the continual improvement and standardisation of monitoring, auditing and reporting systems. While this is a development position, it carries a significant level of responsibility and business impact. The successful candidate will play an important role in ensuring compliance with relevant statutory provisions, codes of practice and industry guidelines. The ideal candidate will be passionate about Health & Safety and committed to promoting best practice through effective workforce engagement and education. Key Responsibilities Include: Work with medic/HSEA’s and operational teams to review Health Risk Assessments, identifying the hazard category, hazard, health impact, route of entry and required exposure monitoring/health surveillance program required Deliver occupational hygiene plan associated with exposures and health risks associated with chemical, physical, biological, psychosocial, and ergonomic factors including but not limited to: Hazardous Substance Management and associated COSHH risk assessments Chemical workplace exposure monitoring for example: Natural gas condensate – benzene and other aromatic hydrocarbons e.g toluene, ethylbenzene, xylene. As well as Mercury, lead, chromium III & VI, solvents, cement-based products, welding fume, toxic gases Asbestos Management and associated surveys, registers including material and priority risk assessment scores and assessment of exposure Noise Management and associated surveys, and assessment of exposure Vibration Management, tool tagging/registers and assessment of exposure Ionising and non-ionising radiation management and associated local rules and assessment of contamination/exposure Thermal hazard assessment, Potable water management, Food borne pathogens, Communicable diseases, Mould & Spores, Animal and insect hazards, DSE, Manual handling, FatigueFurther responsibilities: Recommend and design appropriate control strategies Monitor and evaluate control strategies e.g. LEV/PPE/RPE testing & inspection Deliver occupational hygiene training program e.g. asbestos awareness, dust down procedure, use and maintenance of PPE/RPE Ensure adequate assurance processes (inspections and audits) are undertaken of all operational sites (including onshore support centres and NUIs) covering the full range of occupational health and hygiene standards, guidelines and procedures. Ensure coverage of accommodation, welfare and food preparation areas. Ensure calibration systems for occupational hygiene kit are maintainedKey Requirements Include: The successful candidate will complete Perenco's structured Occupational Hygiene development programme, which is designed to support progression towards the BOHS Certificate of Operational Competence in Occupational Hygiene. Occupational Hygienist working towards achieving or achieved BOHS Certificate of Operational Competence in Occupational Hygiene via either Qualifying BOHS accredited degree or Combination of BOHS W & P modules Minimum 1 years’ experience in the field of occupational hygiene including knowledge of occupational hygiene measurement techniques Oil & Gas experience desirable but not essentia Radiation Protection Supervisor experience desirable but not essential Drive and passion - ability to champion occupational hygiene and workplace health risks throughout the business, including influencing management and the workforce on key topics. Excellent communication skills - ability to present articulately to a variety of forums and through a variety of mediums. Ability to deliver to tight deadlines - produce work to a high standard within agreed delivery dates With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients

Expleo are actively recruiting for a Lead Engineer - Powertrain Controls Embedded Software to work on behalf of our renowned sports car client at their state-of-the-art manufacturing facility in Norfolk. This permanent opportunity will join a highly skilled team to strengthen powertrain controls capability, support programme delivery, meet engineering client objectives and provide technical direction across the department. Responsibilities of the Lead Engineer - Powertrain Controls Embedded Software role: Manual C‑code for engine and transmission control, plus algorithm design, implementation, testing, and initial calibration. Develop engine control strategies to meet emissions and performance targets, resolving engine and transmission control issues. Create and modify calibration procedures, using calibration tools, and guiding others on algorithm calibration. Integrate powertrain controls into vehicle electrical systems and supporting manufacturing and after‑sales. Vehicle and engine controls development, emissions test coordination, and attending off‑site and climatic testing. Lead smaller programmes, coordinating technical work, preparing documentation, and contributing to proposals. Support chief engineers, suppliers, and customers, specifying ECUs and I/O for new systems. Mentor junior engineers and ensuring adherence to safety and engineering processes. Knowledge, skills and experience required for the Lead Engineer - Powertrain Controls Embedded Software role: Ideally educated to Degree or HNC level or equivalent experience Significant experience with authoring manual C-code software, ideally for combustion engine management systems. Deep understanding of powertrain control strategies, combustion engine development, and calibration processes. Strong knowledge of emissions, OBD, and regulatory requirements, especially for high‑performance/low‑volume applications. Skilled with calibration development tools, DoE methods, and calibration management systems. Proven track record delivering senior‑level calibration and powertrain programs. Any application will be treated in a highly confidentiality manner and all conversations will be respected. For more information on the Lead Engineer - Powertrain Controls Embedded Software role, please apply now

Salary: £25,948 (inc. real living wage) increasing to Band C £28,415 (pay rise pending) once qualified and whilst driving a HGV. We have a fantastic opportunity to join our Operations Team and be trained (fully funded) to be a fully qualified Heavy Good Vehicle Driver. This opportunity will be subject to a Learning Contract and we will be looking for you to develop the required skills to be an HGV driver within a 2-6-month period (subject to DVLA test availability). This will involve developing the skills required for a professional driver, attaining your HGV Theory and Hazard Perception tests, practical HGV driving test and Certificate of Professional Competence (CPC) card, developing knowledge of how to supervise a crew, working as part of a team and contributing to the delivery of the service to provide excellent customer service. Whilst you wait to undertake the various aspects of driver training you will be part of a team to undertake waste collection activities across all waste streams. This will be in accordance with the methods and safe systems of work laid down by the Council. The role will involve: Collecting and disposing of waste following Council-approved methods and arrangements. Working collaboratively as part of a team to deliver high-quality services required by the Councils. Complying with health and safety standards to ensure waste collection is completed without impacting the public.When you pass all the requirements for your HGV Licence and CPC card full training will be conducted to: Meet all transport management and depot safety requirements. Act as supervisor to the designated crew during rounds. Maintain professionalism and positive customer interactions. Operate In-Cab technology for feedback and required administration tasks. Collect missed and illegally tipped refuse as directed. Take full responsibility for your vehicle, including checks and fault reporting. Work as a team to meet service standards, targets, and improve continuously.About You You must have a full (Category B) driving licence (for 2 years or more) with no more than 3 penalty points on your license, you will need to apply for your provisional HGV licence and pass the DVLA HGV Theory and Hazard Perception tests. You will also need to meet the medical and eyesight requirements mandated by the Driver and Vehicle Licensing Agency (DVLA). This will be conducted as part of the onboarding process and must be passed to secure the role. You will need to study and undertake training to pass the Certificate of Professional Competence (CPC ) modules 2 and 4 and work to meet the health and safety requirements of the role, including assisting vehicle drivers in the safe manoeuvring of vehicles where appropriate. When not allocated to a collection crew, you will carry out other duties within the operations service. You will need to be physically fit with the ability to walk extended distances, as well as undertake repetitive manual lifting. You will be able to follow procedures and accept direction and be able to work in a professional, competent and positive way with customers. The role will require some flexibility in terms of working early mornings/late afternoons and some weekends where required, particularly following a bank holiday or a period of inclement weather for example. You will be operating in a safety critical role where your safety is paramount, the Council has a zero-tolerance policy to taking illegal substances. This role will be subject to random Drugs and Alcohol testing. Closing Date: 31st August Interview Date: To be arranged post the above date, however, the advert may close earlier than scheduled if the right candidates are identified or there are sufficient applications. Why Join Us? We offer flexible working hours for most office-based roles, allowing for a healthy work-life balance. As part of our team, you will enjoy a range of employee benefits, including free onsite parking, employee discounts, a competitive holiday allowance, wellbeing initiatives, and the opportunity to join the Local Government Pension Scheme. You will be joining a progressive and supportive organisation that is committed to making a positive impact on the communities we serve. The Councils reserve the right to close any and all vacancies at any time if there is judged to be a sufficient number of applications received. South Norfolk and Broadland Councils are committed to promoting the welfare of children and vulnerable adults and all applicants must be willing to undergo appropriate checks for the position, including checks with past employers and the Disclosure and Barring Service

Band 3 Care Team Leader – Norwich Location: Norwich, Norfolk & Surrounding Areas (NR1–NR25) Job Type: Full-Time | Part-Time | Agency | Flexible Shifts Shifts: Days | Nights | Weekends Pay: Competitive Agency Rates | Weekly Pay Experienced Care Team Leaders Wanted – Norwich HCR Recruitment is recruiting experienced Band 3 Care Team Leaders across Norwich and surrounding areas. This is an excellent opportunity for care professionals with strong leadership skills who are passionate about delivering high-quality, person-centred care. The Role As a Care Team Leader, you will support the smooth running of care services, supervise care staff and help maintain excellent standards of care. You will provide guidance to team members while ensuring service users receive safe, personalised and dignified support. Key Responsibilities Lead, support and supervise care staff to deliver high-quality care. Allocate daily tasks and coordinate the care team effectively. Support new and existing team members through guidance and mentoring. Provide hands-on care and assistance with daily living activities when required. Administer medication safely in line with care plans and company procedures. Support safe moving and handling practices. Monitor service users' wellbeing and report changes appropriately. Maintain accurate care records, documentation and daily reports. Promote dignity, respect, independence and person-centred care. Work collaboratively with healthcare professionals, families and support teams. Follow safeguarding, health and safety and care standards. Essential Requirements Minimum 2 years' UK experience within a healthcare or social care setting. Previous experience leading or supervising a care team. Experience with medication administration. Experience with manual handling and safe moving techniques. Strong leadership, communication and organisational skills. Ability to support, motivate and guide team members. Reliable, compassionate and committed approach to care. Right to work in the UK. What We Offer Competitive Care Team Leader agency pay rates. Flexible Team Leader shifts to suit your availability. Full-time and part-time opportunities. Opportunities across care services in Norwich and surrounding areas. Uniform, ID badge and compliance support. Dedicated recruitment consultant support. Weekly pay. * Career development and progression opportunities. Apply Now If you are an experienced Care Team Leader looking for a rewarding agency opportunity across Norwich, Norfolk and surrounding areas, apply today. Important: HCR Recruitment does not provide Skilled Worker Visa Sponsorship for this role. Applicants must already have the legal right to work in the UK. Equal Opportunities: HCR Recruitment is committed to equality, diversity and inclusion and welcomes applications from all suitably qualified candidates

TPS Parts Sales Executive Who are TPS? TPS provides independent garages and bodyshops with the high-quality Genuine Parts and products which customers need to ensure they can service and repair Volkswagen Group vehicles. TPS is part of the Volkswagen Group along with Audi, SEAT, ŠKODA, Volkswagen passenger cars and Commercial Vehicles. TPS is a national network of TPS Centres with a 1,500-strong national workforce and a management team that prides itself on creating an environment that offers our people a motivating and inclusive workplace where they are recognised and rewarded and are encouraged to go on a journey of Learning and Development. Nationally launched as a new brand concept in 2006, TPS is based on an Agency Model; this means that Centres stock and sell on behalf of Volkswagen Group UK. TPS has continued to experience rapid growth both financially and in the number of Centres opened nationwide. About the RoleWhat will you be doing? As a Parts Sales Executive you will be working with the Sales Manager and team to deliver and achieve the business plan and sales objectives of the Centre Achieve personal KPI‘s and revenue objectives with target customers Accurately identify parts to meet the customer sales requirements Utilise all product promotions effectively to achieve specific targets set Identify and leverage potential sales opportunities within customer base Maintain own product knowledge and awareness of competitor activity Build strong working relationships with customers through regular contact with them on the phone and via face to face visits Provide a high level of service to customers - through understanding their requirements, responding to requests, progressing orders and providing expert advice Provide timely communication to customer on their credit status Assist, liaise with and support the TPS Centre team to ensure good working relationships and delivery of excellent customer service Work with the Sales Manager and others to achieve sales targets and provide a joined-up approach to sales Handle incoming calls and customer enquiries within KPI’s, using the approved greeting Ensure the proper and accurate use of all systems to search and order parts Complete all required documentation accurately and promptly Deal with all cash and credit card transactions in line with TPS Guidelines in the Operations Manual Requirements What are we looking for? A self-starter with a proven track record in building strong relationships and achieving sales targets in a B2B environment Confident and capable communicator with proven experience of selling in a fast paced and/or telesales environment Passion for providing a great customer service experience Excellent communication skills both verbally and written with the ability to build strong relationships with all key stakeholders A team player with the drive and determination to achieve individual and sales targets on a weekly & monthly basis Excellent attention to detail and accurate record-keeping IT literate, preferably with a good working knowledge of MS Excel A passion for the automotive industry

Job Title: TIG Welder Location: Norwich Salary: 33-34.5k Our client is looking to recruit a fulltime permanent TIG Welder, the successful candidate will be an experienced welder, with the ability to weld both Stainless Steel & Mild Steel. This TIG Welder position is a manual role for an established fabrication client, based in Norwich Workshop based, assisting in the assembly of fabricated metal products, working with both sheet metal and tubular, welding from detailed drawings. Based within a busy workshop environment, must have real attention to details and able to weld stainless steel materials to a good standard & in a timely manner, due to meeting clients deadlines for completing project. Manual handling – Must be physically fit, as will involve some lifting and moving of completed products , ready for dispatch as required Safety boots / PPE a must Fulltime – Hours are 39 hours a week 07.00am to 15.30pm Mon-Thurs 07.00am to14.30pm Fri Please forward your CV without delay – Immediate starts available

Are you a skilled driver looking for a role that combines your expertise with a meaningful purpose? The BTR Hub is a recruitment and training company working with NHS suppliers. Our Client OnCue Transport are recruiting trained and certified NEPTS contractor drivers to fulfil the high demand for NHS patient transport in the Norfolk area. Full training will be provided at no cost to yourself, preparing you for a role that goes beyond driving and makes a real difference in people’s lives. You’ll be trained to provide compassionate support, ensuring that each patient feels cared for and safe during their transport. About the role: • Driving with Purpose: You’ll be responsible for safely transporting patients to and from their medical appointments, ensuring their comfort and safety throughout the journey., • Care at the Core: While driving is an essential part of the job, this role is deeply rooted in patient care. You’ll be trained to provide compassionate support, ensuring that each patient feels cared for and safe during their transport., • Comprehensive Training Provided: We offer full training that covers First Aid, Health & Safety, Safeguarding, and more, resulting in nationally recognised qualifications. This training equips you with the skills needed to succeed in both the driving and care aspects of the role., • High Earning Potential: As a self-employed Patient Transport Driver, you’ll enjoy increased flexibility while benefiting from high earning potential. Patient transport is in high demand, ensuring a steady flow of work., • Work with a Leading Provider: Join OnCue Transport, a rapidly growing provider of non-emergency patient transport services for NHS Trusts and Ambulance providers, and be part of a team dedicated to delivering care through transportation. Ideal Candidate Profile: • Experienced Drivers: If you’ve worked as a professional driver (e.g. taxi, delivery, or bus driving), your skills are highly transferable to this role. However, it’s crucial to understand that this is not just a driving job - it’s a care position with a strong focus on safeguarding and supporting patients., • Full UK Manual Driving Licence: Must have held your license for at least 3 years, with no more than 3 DVLA points., • Caring Attitude: A genuine desire to care for others is essential. This role involves supporting patients who may be vulnerable, so empathy and patience are key., • Communication Skills: Strong communication skills are necessary to interact effectively with patients, ensuring they feel supported and comfortable during their journey., • Physical Fitness: Assisting patients requires reasonable physical well-being., • Flexibility and Initiative: The ability to work independently, manage your own schedule, and adapt to different patient needs is important for success in this role. This is a great opportunity to make a difference and learn new skills. Ready to bring purpose to your driving career? Apply now and start your journey as a Patient Transport Driver, where every mile makes a difference

We’re recruiting for a Power Platform Developer to join an established professional services business in Norwich that is investing heavily in their automation, Power Platform and AI capability. This role is ideal for someone with good hands-on Power Platform experience who enjoys working directly with users, understanding how processes currently work and building practical, scalable solutions that improve efficiency. Norwich | Permanent | Full time Salary: From £35,000 + benefits Requirements: • Strong hands-on experience with Power Apps and Power Automate, • Experience designing, documenting and improving business workflows, • Confidence working directly with business stakeholders to gather and refine requirements, • Experience connecting Power Platform solutions to data sources, APIs and wider business systems, • Knowledge of SQL Server, Azure SQL or similar data platforms, • A structured approach to testing, troubleshooting and deploying solutions, • Strong communication skills and the ability to explain technical ideas clearly to non-technical audiences What you will do: • Build and enhance Power Apps solutions, • Design Power Automate workflows to streamline and reduce manual processes, • Work with users to identify, assess and prioritise opportunities for automation, • Supoport, maintain and improve existing Power Platform applications, • Connect solutions via APIs, connectors and business data sources, • Support testing, release management and continuous improvement, • Contributing to governance, standards and follow best practices, • Help shape how automation and AI are adopted and scaled across the business Why apply? This is a great opportunity for someone who wants more ownership. You’ll work closely with teams across the organisation taking solutions from initial ideas through to delivery, and contribute to a growing automation and AI capability where your work will be visible, valued and widely used. Apply to learn more about the role and the wider opportunity

Trainee Service Technician Norwich, Norfolk Are you ready to embark on a career with a company that places both its employees and customers at the heart of everything we do? If you're a motivated, customer-focused individual with a clean driving licence and a can-do attitude, we want to hear from you. We are looking for a dedicated Trainee Service Technician to join us, working Monday to Friday at our Norwich service centre, and help provide high-quality products to customers across Norfolk. The Benefits • Starting salary of £25,000 (with an OTE of approx. £27,000+ (with on-call payments) - Additional on-call payments - Contributory pension scheme - 33 days’ annual leave entitlement - Discounts and cashback on shopping, supermarkets, and holidays as part of our rewards scheme - Salary sacrifice schemes including Cycle to Work - Full induction with great training and support from dedicated team members - Death in Service benefit provided - Birthday treat - Be a part of an Employee Ownership Trust (EOT) and the associated benefits of having a stake in the company The Role As a Trainee Service Technician, you will ensure an effective and timely delivery and maintenance service to our customers. After training, this will include the delivery and set-up of products for patients, within agreed delivery times, repair and proactive maintenance of products and support at the delivery stage to customers in various clinical environments. This role follows our Career Pathway, with clearly defined training, experience, and knowledge to enable you to progress your career with Medstrom. Main responsibilities of the role: • Deliver clean, ready-to-use products to customers’ sites - Collect products after use and return to the service centre location - Disinfect, function check, repair and electrical safety test products - full training will be given - Complete records of testing, delivery and collection within our computerised system - Maintain available product stock and spare parts inventory - Complete product modifications when required - Provide product demonstrations and basic training to staff - Maintain a clean and tidy work environment The role requires 37.5 hours per week, Monday to Friday, 2pm - 10pm. Once trained, you will also be required to participate in an out-of-hours on-call rota to support the team and the customer. This is subject to an on-call payment and additional payment for hours worked. About You To join us as a Trainee Service Technician, ideally you will need to have or be willing to develop the following skills: • Mechanical or electrical background desirable, but not essential as full training will be provided - Experience working within a healthcare setting is desirable - Full, valid UK driving licence required (we use long wheelbase vans, but training and support to build confidence in manoeuvring these vehicles will be provided where required) Personal Requirements: • A proactive, ‘can-do’ attitude - Excellent customer service skills - The ability to communicate effectively - The ability to work under your initiative and follow procedures laid out by the business to achieve deadlines - Basic knowledge of hygiene and safety rules - Basic PC skills, including email and MS Office - DBS-checked (or the willingness to complete one) Please note, this role will involve manual handling - lifting, carrying and loading Medstrom products into the van. Why join Medstrom? Established in 2010, Medstrom has grown substantially by being patient-focused to become the organisation we are today, whilst maintaining an open culture and ethos. In 2022, Medstrom became an Employee Ownership Trust (EOT), unlike any other company in the industry. This allows each employee to have a vested interest in the company, where we can all contribute to and share in the company’s success. In addition to the salary and related benefits, you will join a company that has grown extensively within the last five years, and through our unique ownership model, is continuing to grow, whilst offering great career opportunities for those who are keen to progress. Webrecruit and Medstrom Ltd are equal opportunities employers, value diversity and are strongly committed to providing equal employment opportunities for all employees and all applicants for employment. Equal opportunities are the only acceptable way to conduct business, and we believe that the more inclusive our environments are, the better our work will be. Medstrom operates a zero-tolerance policy to any harassment of any kind towards our colleagues. This vacancy is being advertised by Webrecruit. The services advertised by Webrecruit are those of an Employment Agency

Tower Crane Electrician Job Type: Full Time, Permanent Location: Shipdham, Norfolk Working Hours: Monday to Friday – 7:30am to 4.00pm, with a 30-minute unpaid lunch break. Overtime available when required. Salary: £16.00 per hour to £18.00 per hour, depending on experience. Benefits: Pension Scheme Death in Service Enhanced annual leave based on service (first increase of one day after 2 years) Within the Falcon Group is Falcon Tower Crane Services, the largest tower crane supplier in the UK and one of the largest in the world with just under 450 tower cranes nationwide. Falcon Power Generation with 400 generators nationwide along with Falcon Freight who operate a fleet of 37 HGV vehicles with a selection of units supporting artic and rigid HIAB cranes. We are looking for a full-time Tower Crane Electrician to be based at our Shipdham, Norfolk depot. Comprehensive training, continued professional development, and ongoing support will be provided to help you excel in the role. Full training alongside engineers with various skill sets will be given until duties can be performed independently. The Role – Tower Crane Electrician: Working collaboratively within the Electrical Department at our Shipdham Depot, you will be responsible for carrying out full services on our fleet of tower cranes, completing repairs and modifications according to the manufacturer’s specifications, preparing tower cranes ready to be loaded to sites, assisting with the servicing and maintenance of all tower cranes at the Shipdham Depot and working in accordance with the tower crane build sheet. You will also be responsible for completing inspections, safety checks, and accurate maintenance records, sourcing replacement parts where required, and responding to equipment breakdowns to minimise operational downtime. The role will involve working at height in line with Company procedures, using approved safety equipment at all times. You will ensure all work is completed safely and efficiently, following Company policies, procedures, risk assessments, and relevant health & safety requirements. What We’re Looking For – Tower Crane Electrician: Essential Experience & Qualifications: 2391-51 Inspection and Testing of Electrical Installations. 2365-02 Level 2 Diploma in Electrical Installations. NVQ Level 3 in either a Mechanical or Electrical background. Current Wiring Regulations, for example, Level 3 Award in the Requirements for Electrical Installations BS 7671 (18th Edition). Fault finding experience. Desirable Qualifications & Experience – Tower Crane Electrician: A40C – Pedestrian Operated Tower Crane. A40B – Slinger. Forklift Driver. Working at Height. Manual Handling. Abrasive Wheels. Key Skills & Personal Attributes – Tower Crane Electrician: Confidently read and understand electrical diagrams. Competence with 3 Phase electrical supplies. Competence with low voltage AC and DC control circuits. Capable of following manufacturers’ guidelines and safe systems of work. Fully conversant with, and able to navigate, tower crane manufacturers’ handbooks. Able to communicate clearly and effectively. Able to work independently and as part of a team with a highly supportive and collaborative approach. Excellent time management skills to ensure the workload is carried out effectively. Excellent attention to detail and the ability to work under pressure. Commitment to safety and following company procedures Positive attitude, good timekeeping, and a desire to learn and develop Strong problem-solving abilities and a hands-on approach to tasks. Strong work ethic and a can-do attitude. The ability to perform the job responsibilities safely and effectively, without endangering your own health or the health of others. Be prepared to work outside in all weather conditions, for which suitable PPE will be provided. Promote and display a positive Safety Culture. Due to our rural location, it is essential that the successful candidate has a full driving licence and their own transport