Trabajos Engineering en WatfordCrear alertasSin experiencia

Join Our Team as an Electrical Project Engineer!\n Are you ready to take your engineering career to the next level? We’re on the lookout for a passionate Electrical Project Engineer to join our dynamic Thames Water team at our site in Maple Lodge, Rickmansworth. Location & Hours\n Location: Maple Lodge, Rickmansworth Hours: 45 hours per week (some flexibility available—just let us know when we chat!) \n Please note: We are unable to offer certificates of sponsorship for this role. Your Role\n As an Electrical Project Engineer, you will play a crucial role in delivering major water and wastewater infrastructure projects across the Thames Water region. Collaborating with a multidisciplinary team, you will be involved in: \n \n • Supporting electrical engineering activities throughout the project lifecycle and reviewing technical documentation.\n, • Coordinating electrical installations with site teams, suppliers, and subcontractors.\n, • Attending Factory Acceptance Tests, Site Acceptance Tests, and commissioning activities.\n, • Assisting in the installation and commissioning of LV and HV systems under the guidance of senior engineers.\n, • Monitoring quality, safety, and programme performance of electrical works while contributing to continuous improvement initiatives.\n What We’re Looking For\n This role is perfect for you if: \n \n • You hold an HNC/HND in Electrical Engineering, Electronic Engineering, or a related discipline, or have equivalent practical experience.\n, • You have experience in utilities, infrastructure, manufacturing, water, power generation, or industrial environments.\n, • You possess knowledge of industrial electrical installations, MCCs, and power distribution systems.\n, • You understand health, safety, and quality requirements on construction projects.\n, • You have strong communication and stakeholder management skills, along with a Full driving licence.\n \n At Kier, we believe in recognizing potential! If you don’t meet every single requirement, don’t hesitate to apply—we’d love to chat! Rewards and Benefits\n We’re proud to offer a wide variety of benefits that you can tailor to fit your needs. Join us and discover the perks of being part of our team! Diversity and Inclusion\n Creating a diverse and inclusive workplace is a top priority for us at Kier. We’re committed to continuous improvement and value the contributions of our employees in shaping our diversity and inclusion initiatives. As a Disability Confident employer, we ensure that a fair number of disabled applicants meeting the minimum criteria for this role will be offered an interview. \n We can’t wait to see your application! Join us and be part of something great. #joinkier #LI-CH1 \n

We're looking for an Electrical / ICA Engineer to join our Thames Water Major Projects team based on our Maple Lodge site in Rickmansworth.Location: Maple Lodge, Rickmansworth- remote working available, with occasional travel to the office required.Hours: 45 hours per week - some flexibility on hours available if desired, just let us know when you speak to us.We are unable to offer certificates of sponsorship to any candidates in this role.As an Electrical/ICA Engineer, you'll be providing LV Electrical, Control & Automation, and PLC & SCADA engineering expertise for industrial projects within the water industry. Working as part of our Thames Water Major Projects team, you'll collaborate with colleagues to deliver high-quality solutions for new and existing infrastructure across the region. This is an excellent opportunity for a quality-focused professional with a proven track record in managing Electrical ICA works on major projects.What will you be responsible for?As an Electrical / ICA Engineer, you'll be working within the Thames Water Major Projects team, supporting them in delivering electrical and ICA engineering solutions for water treatment projects. Your day to day will include:Reviewing and providing constructive feedback on LV Electrical and ICA documentation, including MCC/RTU electrical schematics, control philosophies, and SCADA architecture drawings, ensuring compliance with water industry asset standards (WIMES)Representing Kier at client meetings and conducting technical reviews of electrical and ICA installations and commissioning works on siteConducting fault finding and system configuration for MCC and ICA equipment including PLCs and control panels, and overseeing installation of communication networksAttending Factory Acceptance Tests for MCC/RTU builds, SCADA and PLC control software, ensuring products meet all design criteria and operational requirementsEngaging with the supply chain to provide innovative proposals and supporting contractors whilst ensuring company standards in health & safety, environmental, and quality are maintainedWhat are we looking for?This role of Electrical / ICA Engineer is great for you if:You hold an HNC qualification in Electrical/Electronic or Instrumentation Engineering, or a similar disciplineYou have experience in ICA engineering, PLCs, HMIs, Profibus networks, and SCADA installations on large-scale water treatment worksYou possess a good knowledge of Low Voltage large motor control centres and associated ICA sections, and understand various communications protocols such as Profibus, Modbus, and Ethernet IPYou have experience of contractor management and setting people to work safely, with strong interpersonal skills and the ability to work as part of a multi-discipline teamYou hold a Full driving licence and have knowledge and experience with WIMES and UK water industry standardsWe're all about finding potential here at Kier, and transferrable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat.Rewards and benefitsWe're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here.Diversity and inclusionMaking Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview.We look forward to seeing your application to #joinkier #LI-CH1TPBN1_UKTJ

Job Description Escalator Engineer- Days Jobs in Greater London at Stannah - Join Our Team! Location: Greater London (including Gatwick & Stansted rail stations) Hours: 7:00 – 19:00, 4 on 4 off (12-hour shifts with 45-minute unpaid break). Salary: Up to £75,000 (incl OTE) based on skills and experience level, and Paid Door to Door. Join Stannah as an Escalator Engineer working across some of the UK’s busiest transport hubs, including key rail and underground sites. You’ll be responsible for maintaining and repairing a range of high-profile escalator systems, ensuring safe, reliable operation across your London patch. You will be servicing, maintaining and repairing a wide range of escalators and moving walkways across major rail and underground sites. This includes working on specific equipment such as KONE TM, RTV and RTK units, Schindler 9300 escalators, Anlev systems, and Otis 506 NCE equipment. The work is varied, technical and fast-paced, requiring strong fault-finding skills across both mechanical and electrical systems. Your patch will cover all of Greater London, with additional work at Gatwick Airport station and Stansted Airport station. The role is focused on transport infrastructure, meaning you will be working in high-profile, safety-critical environments but without the need for wide regional travel. If you are an experienced escalator engineer living within the M25 looking for a structured shift pattern, exposure to high-profile London projects, and a role with no call-out rota, this is an excellent next step in your career. Escalator Engineer Responsibilities: • Conduct maintenance, repairs, and callouts on escalators and moving walkways from various manufacturers., • Ensure high standards of service delivery, safety, and customer care., • Perform effective risk assessments and maintain site log cards during every visit. .Please see the full job description here: _ Qualifications Escalator Engineer Requirements: • Qualifications: NVQ Level 3 in Escalator Engineering or equivalent., • Experience: Proven experience working on escalators and moving walkways., • Driving License: A valid UK driving license is essential for this role Additional Information If you’re an experienced Escalator Engineer with a solid technical background and are looking for a new challenge, we’d love to hear from you! Whether you're seeking an Escalator Engineer job or a Lift and Escalator Engineer job, click the "Apply Now" button to send your CV or contact us for further information. Benefits Include: • Market Aligned Salary, paid on a monthly basis, • Profit Share Bonus Scheme, paid to all employees every quarter. Based on Group Company profits, • 197.5 Holiday hours, • Company Vehicle, • Holiday scheme to buy extra days’ annual leave, • Pension Scheme. Matched contribution/salary sacrifice, • SimplyHealth Cash Plan. Allows you to claim towards health costs. For example, dental, optical, physiotherapy, chiropody treatments and more, • Life Assurance Scheme, • Long Service award scheme, with holiday benefit, • Company Benefits Discount Rewards Scheme. Includes shop discounts, hotel discounts, days out, and more, • Employee Assistance Programme. A workplace initiative to support and enhance well-being, • Enhanced maternity and paternity provision, • Expenses paid within 7 days (subject to the process being followed) #LDS Stannah Group is an equal opportunities employer. We welcome and encourage applications from candidates of all backgrounds, identities, and abilities. We are a Disability Confident Committed Employer. We treat all our job applicants fairly and with respect. Our employees are the heart of our business. We take great care to create a working environment where everyone feels valued. Join our team and be a part of our diverse and inclusive community! We reserve the right to close this vacancy early if we receive high numbers of applications for the role. Appropriate right to work must be held by applicants. Sponsorship is not available. PandoLogic. Category:Installation & Maintenance, Keywords:Maintenance Engineer, Location:Harrow, ENG-HA1 1QW

Multiskilled Maintenance EngineerLocation: Harrow, HA2Salary: £50,000 £65,000 + Bonus + BenefitsHours: 40 hours/week, shift flexibility requiredAbout the RoleBolt Technical are hiring for our client , a leading manufacturer supplying global brands in over 100 countries , including applications in motorsport, automotive, and military industries.As a Multiskilled Maintenance Engineer, you will ensure the safe and efficient operation of all machinery in our clients manufacturing facilities, supporting production, quality, and continuous improvement initiatives. This is a hands-on role where you will be part of a small, supportive engineering team within a friendly, family-oriented company.Key ResponsibilitiesDevelop and implement preventative maintenance schedules for bottling, filling, capping, labelling, and packaging machinery.Diagnose and repair mechanical and electrical faults to minimise downtime.Assist with installation and commissioning of new production equipment.Conduct regular inspections and tests to ensure high-quality output and compliance with specifications.Maintain accurate maintenance records, work orders, and inventory of spare parts.Ensure safety and regulatory compliance across all engineering activities.Provide training and guidance to operators and colleagues on equipment use and maintenance.Support continuous improvement projects and operational enhancements.What Theyre Looking ForA degree, HNC, HND in a Mechanical or Electrical DisciplineStrong mechanical and electrical troubleshooting skills , ideally with PLC knowledge (Siemens, Allen-Bradley, Omron).Hands-on experience in liquid filling, bottling, or packaging operations .Familiarity with CMMS systems for tracking maintenance activities.Experience with continuous improvement initiatives and small-scale project management.Strong teamwork, communication, and problem-solving skills .Proactive, adaptable, and able to work independently when required.BenefitsCompetitive Salary of £50,000 - £65,000 per annumDiscretionary annual bonusPension scheme (currently 3%, under review)Medical Cash Plan including dental and GP accessLife insurance (3x salary)23 days annual leave + 8 bank holidays (increasing with service) + Christmas shut downBy applying to this job advertisement, you confirm you have read and understood our Data Privacy Statement and give Bolt Technical authorisation to hold your provided data.Thank you for your interest in this vacancy, which is being advertised by Bolt Technical acting as an employment agency/business. Your application will be considered in competition with others, and we will contact you within 5 working days.TPBN1_UKTJ

Service EngineerWe are looking for a skilled and customer-focused Service Engineer to join a growing field service team. This role involves visiting customer sites to carry out planned preventative maintenance, reactive repairs, and upgrade works on automatic door systems and associated equipment.The successful candidate will be responsible for diagnosing faults, completing repairs efficiently, and delivering a high standard of customer service while ensuring compliance with all health and safety requirements.Key ResponsibilitiesCarry out planned preventative maintenance (PPM), reactive call-outs, and modernization/upgrade workDiagnose mechanical and electrical faults using a logical and methodical approachProvide technical support and recommendations to customers and colleaguesIdentify opportunities for preventative maintenance, repairs, and system upgradesComplete door safety checks and investigate incidents or customer concerns where requiredParticipate in an out-of-hours call rotaMaintain accurate service records, paperwork, and tablet-based reportingManage company vehicle, tools, stock, uniform, and PPE responsiblyFollow all site-specific procedures and health & safety regulationsDeliver excellent customer service at all times and maintain professional standardsWork collaboratively as part of a wider engineering teamSupport continuous improvement by highlighting process or operational improvementsSkills & ExperiencePrevious experience working on automatic doors or similar systems is highly desirableStrong mechanical and/or electrical fault-finding skillsGood organisational and communication skillsAbility to work independently and manage workload effectivelyFlexible approach to working hours, including call-outs and occasional weekend workCommitment to delivering high levels of customer serviceQualifications & RequirementsBS7036 / EN16005 certification preferredCSCS Card desirableNVQ in Door Systems, Repair, or a related discipline advantageousFull UK driving licence preferredWhat's OfferedFull product and ongoing technical trainingOpportunity to work with a supportive and experienced engineering teamVaried and rewarding field-based roleOvertime and call-out opportunities availableCareer development within a growing service environmentTPBN1_UKTJ

Service Engineer (Air Compressors)£45,000 - £50,000 + Overtime (OTE £68,000) + Van + Progression + Training + 33 Days HolidayWatford \n Are you a Service Engineer with experience working on air compressors, looking for a role covering a local patch with plenty of overtime to drastically boost your earnings? \n In this role you will be responsible for servicing, installing, and working with air compressor systems, with further manufacturer training given. You will be provided with a company van as you cover a local patch across London and Hertfordshire. \n This company takes pride in delivering quality service and has a goal to expand their services to be 7 days a week allowing extra working opportunities for their staff. They are looking for a Field Service Engineer to join the team and progress within the company. \n This role would suit a Field Service Engineer who has worked with compressors looking to travel around their local area, where they are home every night, with plenty of optional overtime and opportunities to progress in their career. \n The Role: \n\n • Servicing, installing and maintenance of air compressors\n, • Covering a local patch across Hertfordshire and London\n, • Monday to Friday, 8:00am - 5:00pm\n, • Up to 10 hours overtime weekly, paid at 1.5x\n\n The Person: \n\n • Field Service Engineer\n, • Air compressor background\n\n Reference Number: BBBH26135 \n Engineers, Engineer, Engineering, Compressors, Compressor, Service, Installation, Maintenance, Installer, Servicing, Mobile, Technician, Army, Forces, Navy, Progression, London, Hertfordshire \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Mechanical Service Engineer (Local Patch) £45,000 - £50,000 + Overtime (OTE £68,000) + Van + Progression + Training + 33 Days Holiday Watford \n Are you a Service Engineer from any mechanical background, looking to cover a local patch in a provided van with plenty of optional overtime to drastically boost your earnings? \n In this role you will be responsible for servicing, installing, and working with air compressor systems, with further manufacturer training given. You will be provided with a company van as you cover a local patch across London and Hertfordshire. \n This company takes pride in delivering quality service and has a goal to expand their services to be 7 days a week allowing extra working opportunities for their staff. They are looking for a Field Service Engineer to join the team and progress within the company. \n This role would suit a mechanical Service Engineer who is looking to travel around their local area, where they are home every night, with plenty of optional overtime and opportunities to progress in their career. \n The Role: \n\n • Servicing, installing and maintaining air compressors\n, • Full industry training provided\n, • Covering a local patch across Hertfordshire and London\n, • Monday to Friday, 8:00am - 5:00pm\n, • Up to 10 hours overtime weekly, paid at 1.5x\n\n The Person: \n\n • Service Engineer\n, • From any mechanical background\n, • Looking for full training on air compressors\n\n Reference Number: BBBH26135d \n Engineers, Engineer, Engineering, Compressors, Compressor, Service, Installation, Maintenance, Installer, Servicing, Mobile, Technician, Army, Forces, Navy, Progression, London, Hertfordshire \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. \n \n

Harrow / Uxbridge / West London & Surrounding AreasUp to £60,000 + Benefits | Door-to-Door Travel (depending on experience)An established commercial engineering company is looking for an experienced Commercial Gas Engineer to join its team. The company has a strong client base and provides ongoing work across commercial sites throughout West London.This is an exciting time to join as they have recently been awarded further contracts.The Role Service, maintain and repair commercial gas systemsPlanned and reactive maintenanceFault finding and diagnosticsAttend commercial client sites across the areaComplete service reports and relevant paperworkWork to current health, safety and compliance standardsRequirements Commercial Gas qualificationsRelevant commercial gas service and maintenance experienceFull UK driving licenceGood customer service and communication skillsAble to work independentlyPackage Up to £60,000Door-to-door travel paidCompany vehicleOvertime availablePension and holiday allowanceCompany phoneTraining and developmentCareer progressionStable, permanent positionCovering Harrow, Uxbridge, Hillingdon, Hayes, Ruislip, Ealing, Wembley, Hounslow, West London and surrounding areas.To be considered, please pass across a CV and a member of MarkMay will be in touchTPBN1_UKTJ

LOCATION: South East - Herts, Beds, Oxfordshire, Essex, Kent, Surrey, Berkshire \n SALARY: £53k - 55k basic + com + car allowance + benefits \n My client is a leading Manufacturer of high-quality Industrial Lubricants both in the UK and Worldwide. They sell into the manufacturing and process industries, customers include OEM's such as Aerospace, Automotive, Paper, Energy and Steel. \n They are looking to recr... \n \n ZIPC1_UKTJ

Electrically Biased Maintenance EngineerLocation: HertfordshireSalary: £48KShift Pattern: Monday to Friday (6:00am-2:00pm / 2:00pm-10:00pm) No weekendThe RoleWe are seeking an Electrically Biased Maintenance Engineer to join a well-established manufacturing site in Watford. This role is ideal for an engineer with strong electrical and mechanical maintenance experience gained within a regulated manufacturing environment.You will be responsible for carrying out planned and reactive maintenance, fault finding, and continuous improvement activities across a range of production equipment and site services, ensuring high levels of reliability, safety and compliance.Key ResponsibilitiesCarry out electrical and mechanical maintenance on production equipment.Perform fault finding and troubleshooting on automated manufacturing machinery.Complete planned preventative maintenance (PPM) and reactive maintenance tasks.Work on conveyors, motors, drives, sensors and control systems.Support site utilities including HVAC, steam systems, compressed air and water systems.Ensure compliance with GMP standards and engineering safety procedures.Follow Lock Out Tag Out (LOTO), isolation and safe working procedures.Assist with continuous improvement and equipment reliability initiatives.Maintain accurate maintenance records and documentation.Candidate RequirementsApprentice-trained Engineer with an electrical bias.Previous experience within pharmaceutical, food, FMCG or manufacturing environments.Strong electrical fault-finding and maintenance skills.Good understanding of PLC-controlled equipment and automation systems.Experience with motors, drives, sensors, conveyors and control panels.Knowledge of preventative and reactive maintenance practices.Understanding of GMP, engineering compliance and health & safety procedures.Familiar with LOTO and isolation procedures.Desirable ExperienceExperience within a pharmaceutical manufacturing environment.Knowledge of utilities and site services including HVAC, boilers, compressed air and purified water systems.Continuous improvement mindset with strong problem-solving skills.TPBN1_UKTJ

Fire Extinguisher Engineer - £40k OTE + Joining Bonus \n Location of works: North & North West London Salary Bracket: £32,445 basic + £5,000 London Weighting On target earnings (OTE): £40,000+ Industry: Fire and Security Recruitment Partner: 4way Recruitment Ltd - Specialists in finding the right talent across the full spectrum of Fire, Security, Mechanical & Electrical roles since 2015. \n About Our Cus... \n \n ZIPC1_UKTJ

Job Title: Water Treatment Equipment Engineer Location: Watford, Hertfordshire Salary/Benefits: £30k - £50k + Training & BenefitsWe are recruiting in the South East of England for an experienced Water Treatment Equipment Engineer to join their successful team. Our client is a growing and respected outfit, who provide the full range of Water Treatment Services. The ideal engineer will be able to demonstrate strong technical knowledge and will be flexible to travel in line with company needs. You will be servicing a range of commercial, manufacturing and industrial premises across the region. Our client is offering competitive salaries and benefits (including: vehicle, fuel card, overtime, pension scheme and annual leave).Locations of work include: Watford, Ilford, Barking, Dagenham, Romford, Grays, Tilbury, Basildon, Chigwell, Epping, Enfield, Cheshunt, Potters Bar, St Albans, Harrow, Wembley, Slough, Beaconsfield, Windsor, Southall, Kingston upon Thames, Woking, Twickenham, Surbiton, Mitcham, Epsom, Croydon, Sutton, Bromley, Caterham, Oxted, Sevenoaks, Dartford, Erith, Bexleyheath, Sidcup, Gravesend.Experience / Qualifications: -Experience working as a Water Treatment Equipment Engineer within a well-established outfit -It would support applications to hold plumbing qualifications (i.e. NVQ, Diploma and G3 Unvented) -Fully conversant in HSG 274 and ACOP L8 legislation -Good literacy and numeracy skills -Proficient using IT software -Flexible to travel as per client needsThe Role: -Installing and commissioning water softeners, UV filtration and reverse osmosis systems -Installing and servicing of cooling tower and chemical dosing equipment -Connecting control panels and associated electrical works -Diagnosing faults on existing systems -Modifications of existing pipework -Interpreting from schematics / blueprints -Providing technical feedback and project updates to clients -Liaising with clients to arrange site access -Updating logbooks and technical documents -Representing the company in a professional mannerAlternative job titles: Water Service Engineer, Equipment Technician, Water Installation Engineer, Water Treatment Engineer.Future Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market.We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level.We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills.Future Select CopyrightTPBN1_UKTJ

Job Role: Alarm EngineerLocation: Hertfordshire and surrounding areasSalary: £30,000 - £32,000 per annum (negotiated on experience)Hours: 40 hours over Monday - FridayThe Role:The installation of staff attack and nurse call systems primarily in Healthcare, Probation service, Prisons and Schools. The role involves the installation of our clients systems from planning, containment, cabling, 2nd fix and setting to work along with providing reactive and preventative cover to our existing customers. The environments worked in are often challenging due to the client base and engineers should be able to adapt to the environment and the needs of the site.Full training will be provided upon joining the company and my client is a supportive, nurturing company who is able to offer additional qualifications and upskilling opportunities. A genuine career opportunity will be on offer with the chance to progress both job title and salary.Key Targets :To install bespoke security systems as instructed by company Project Co-ordinatorTo ensure that Installations are brought in on time and to required quality.To ensure installation folder is not deviated from except with authorisation from the head office.To carry out Preventative Maintenance visits on existing systems as instructed by the Service Department in conjunction with the project co-ordinator.To attend faults as instructed by the Service Department in conjunction with the project co-ordinator.To provide on call cover out of hours as required (not frequent)To ensure that your work/company uniform is worn at all times and any relevant safety equipment required for the task being undertaken is used.To ensure all paperwork & parts used during Installation, Preventative Maintenance and Faults are returned on a weekly basis.To ensure the Managing Director is kept informed of any issues/complaints raised by engineers or customers.You will be expected to undertake a DBS and CRB check prior to commencing employment, due to the nature of the clients and sites the company works with.TPBN1_UKTJ

An excellent opportunity for an experienced Field Service Engineer Mobile Welfare Units to join a well-established company. \n Job Type: Full-Time, Permanent \n Salary: Competitive Salary, Depending on Experience. \n Location: Watford Home Based Working in the Field. \n About The Company: \n They are a market leader in the repair and maintenance of towable and static cabins that keep site teams warm, fed and safe ... \n \n ZIPC1_UKTJ

Job Description:Well give you £10,000 to make the jump!Yes, you read that right. Were serious about achieving our ambition of making the UK NetZero by 2050. We know that to get there, we need to hire the best and to make that happen were offering a £10,000 sign-on bonus.Join us, be part of more.Were more than an energy company. Were a family of brands revolutionising how we power the planet. We're energisers. One team of 21,000 colleagues that's energising a greener, fairer future by creating an energy system that doesnt rely on fossil fuels whilst living our powerful commitment to igniting positive change in our communities. Here, you can find more purpose, more passion, and more potential. Thats why working here is #MoreThanACareer. We do energy differentlywe do it all. We make it, store it, move it, sell it, and mend it.About your team:At British Gas, our mission is to sell it and mend it.Were the household heroes powering 1 in 3 homes in the UK but supplying energy is just part of what we do. Were making the UKs homes greener and more energy efficient.About your role:We need Heating Installation engineers to join our team of experienced Gas Engineers, to ensure that our customers get the help they need, when they need it. Being there for our customers is our priority.As we continue to grow our Net Zero offering, you'll also support Air Source Heat Pump (ASHP) installations, with relevant training and upskilling provided to support your development.Base Salary is £45,806 & through our fantastic field reward scheme you can expect to earn on average up to 7% of your annual salary per quarter.London Weighting Allowance up to 6.4k Applicable dependent on area.Here's what were looking for:A natural dedicated focus on providing outstanding customer experience on every visit.Current ACS qualifications (CCN1 and CENWAT) or equivalent in plumbing or heating.3 years qualified experience behind you of full system installations.Electrical knowledge, including wiring and fault finding on S-plan, Y-plan and combination systems and boilers.TPBN1_UKTJ

ENGINEER SURVEYOR \n Job Title: Engineer Surveyor (Lifting & Crane Equipment) \n Location: Covering the London Area (Must Live within the M25) \n Salary: Basic from £42,500 (includes London Weighting) plus Car Allowance and a Excellent Benefits Package \n Shift: Days, Monday – Friday, Flexible Working Hours Job Role of the Engineer Surveyor. \n A standout opportunity has become available for a Engineer Surveyo... \n \n \n \n \n \n ZIPC1_UKTJ

HVAC Engineer / Air Conditioning Engineer?? Location: Watford, home counties & London?? Salary: £45,000 - £53,000 + Overtime + Bonus + Company Van & Fuel CardJoin a Growing Team with Excellent Benefits & Career ProgressionAre you an experienced HVAC Engineer or Air Conditioning Engineer looking to join a forward-thinking business that genuinely invests in its engineers?Our client is building a Service & Maintenance team and is looking for a skilled engineer to become part of their growing workforce. This is an excellent opportunity to join a well-established company with long-term contracts, household-name clients, and genuine opportunities for career development.If you're looking for job security, excellent earning potential, and the chance to be part of an exciting period of growth, we'd love to hear from you.What's on Offer?Salary of £45,000 - £53,000Company van and fuel cardPersonal use of the company vanPlenty of overtime available to significantly boost earningsPerformance bonusEmployee Trust Scheme - receive a percentage of your earnings tax freeBUPA healthcare and private dental cover after the qualifying periodOngoing training and developmentLong-term career progression within a growing businessStable, long-term contracts with prestigious blue-chip clientsThe RoleWorking on a mobile basis across Watford, home counties , London, you'll carry out planned preventative maintenance, servicing and reactive maintenance on a wide range of commercial air conditioning systems.You'll be responsible for maintaining equipment including:VRV & VRF systemsSplit and Multi-Split systemsAir Handling Units (AHUs)Other commercial HVAC and air conditioning equipmentYou'll work across a varied portfolio of high-profile commercial sites for well-known household-name clients, ensuring equipment is maintained to the highest standards.About the CompanyOur client is a highly respected HVAC specialist with an outstanding reputation for quality, reliability and customer service.With a nationwide and international engineering presence, they continue to grow and are now investing in their own dedicated service and maintenance division. Their engineers are at the heart of the business, with ongoing investment in training, development and career progression.This is an exciting opportunity to join the team during a key stage of expansion.What We're Looking ForWe're looking for hvac engineers/air conditioning engineers who are passionate about delivering excellent service and take pride in their work.You'll ideally have:F-Gas certificationCity & Guilds or NVQ qualifications in Air Conditioning/RefrigerationPrevious experience servicing and maintaining commercial air conditioning systemsStrong knowledge of VRV, VRF, Split and Multi-Split systemsExcellent customer service and communication skillsA professional and reliable approachA full UK driving licenceMost importantly, you'll be looking to build a long-term career with an ambitious company that values its engineers and offers genuine opportunities to progress.Apply today to become part of a growing team where your skills are recognised, your development is supported, and your earning potential is rewarded.TPBN1_UKTJ

Lead Engineer, Watford Full-Time | Permanent £55,000 - £62,500 + Car + PackageAre you a technically minded engineer with strong mechanical and electrical knowledge and a passion for leading people?Were recruiting on behalf of an innovative, rapidly growing business for a Senior Lead Support Engineer to lead a team of Support Engineers while providing expert second-line technical support across a nationwide engineering operation.This is an exciting opportunity to join a business at the forefront of technology, where youll play a key role in improving service performance, supporting field engineers, and driving innovation through digital tools and AI.What Youll Be DoingLeading and developing a team of Remote Support Engineers.Providing expert remote fault diagnosis across mechanical and electrical equipment.Supporting and coordinating field engineers to deliver fast, effective resolutions.Developing and improving internal digital tools, dashboards and support processes.Analysing service performance and identifying opportunities for continuous improvement.What Were Looking ForStrong mechanical and electrical fault-finding experience.Previous experience in technical support, field service or engineering.Leadership or mentoring experience, or someone ready to take the next step.IT confident, with an interest in digital tools, automation and AI.Excellent communication and problem-solving skills.Experience with PLCs, sensors, motors or mechatronic equipment would be advantageous.Whats on OfferJoin a thriving, expanding business with exciting growth plans.Genuine career progression and development opportunities.Competitive salary and benefits.A varied role combining leadership, technical expertise and innovation.If youre ready to take the next step in your engineering career and want to make a real impact within a growing organisation, wed love to hear from you.TPBN1_UKTJ

Field Service Engineer (Mechanical)£45,000 - £50,000 + Overtime (OTE £68,000) + Van + Progression + Training + 33 Days HolidayWatford \n Are you a Field Service Engineer from a mechanical background looking to work for a well-established, thriving company offering tailored in-house training on air compressors and clear progression to managerial roles in two years? \n In this role you will be responsible for servicing, installing, and working with air compressor systems, with full manufacturer training given. You will be provided with a company van as you cover a local patch across London and Hertfordshire. \n This company takes pride in delivering quality service and has a goal to expand their services to be 7 days a week allowing extra working opportunities for their staff. They are looking for a Field Service Engineer to join the team and progress within the company. \n This role would suit a Field Service Engineer from a mechanical background, looking to travel around their local area, with tailored training and clear routes to progression into managerial roles. \n The Role: \n\n • Servicing, installing and maintenance of air compressors\n, • Covering a local patch across Hertfordshire and London\n, • Monday to Friday, 8:00am - 5:00pm\n, • Up to 10 hours overtime weekly, paid at 1.5x\n\n The Person: \n\n • Field Service Engineer\n, • Mechanical background\n\n Reference Number: BBBH26135a \n Engineers, Engineer, Engineering, Compressors, Compressor, Service, Installation, Mechanical, Electrical, Maintenance, Installer, Servicing, Mobile, Technician, Army, Forces, Navy, Progression, London, Hertfordshire \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. \n By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

A fantastic opportunity to work for a family run Hertfordshire based domestic and commercial heating company that has worked very hard over the years and that is paying off. The company has also just started to do domestic air conditioning installations to capitalise on that growing trend. They are expanding, they have a solid plan and they have stuck to it, this has meant their name is on everyone’s lips and with that…. a lot more work coming through the door. They pride themselves on being able to provide what the big heating companies cant, and people LOVE that about them. Want to be part of this story and progress with them? Read on… \n \n Due to expansion they are looking for an engineer to install domestic and commercial heating systems \n \n\n • 90% of the time covering North west London, North East London and south Hertfordshire with some work being Essex or west London way\n, • Installing domestic and commercial heating systems along with all the relevant pipe work – NO BUILDING SITES\n, • Working with a variety of commercial client across the region such as care homes, churches, NHS sites and of course people’s homes\n\n \n \n Skills Needed to be a heating installer \n \n\n • Living in or around the north west London or north east London or south Hertfordshire area\n, • Domestic and commercial gas certificates required as well as UP1A and UP1B\n, • Top tier pipe work skills\n, • Basic electrical skills for wiring up controls\n, • Experience installation domestic and commercial heating systems needed\n, • You need a ‘can do’ attitude and be looking for a long term position with good progression\n, • Be able to pass an enhanced DBS check\n\n \n \n Salary and Benefits of a gas & air conditioning Installation Engineer \n \n\n • 48-53k basic depending on experience\n, • Van, Phone, Fuel card, specialist tools, uniform\n, • 25 days holiday + 8 bank holidays\n, • No weekend rota but A lot of overtime if you want it\n, • Progression as they are wanting to build a team around you\n\n \n \n For an immediate interview contact Adam Southam \n \n \n In the event that you are contacted for a role, please note that as part of the registration process you shall be required to provide FRONTrunner Recruitment Ltd. with proof of identity as well as proof of eligibility to work in the United Kingdom.

Salary and Benefits for a Junior Air Conditioning & Refrigeration Installation Engineer \n \n\n • 25-35k basic salary depending on experience and certificates\n, • Further training and courses\n, • Oyster Card for train travel to get to and from sites\n, • Phone\n, • 20 days holiday + 8 bank holidays\n, • Private healthcare after 1 year\n\n \n \n A fantastic chance to join an established and expanding air conditioning and refrigeration contractor who pride themselves on the quality service they provide their clients. They cover across the London and home counties area providing service, maintenance, design and installation on various systems and are very active on energy consumption and how to reduce this for their clients. Their employees are always looked after and can move up in the company due to further training and being looked after. \n \n Due to expansion they are recruiting for a Junior air conditioning and refrigeration Installation engineer you will be:- \n \n\n • Working mostly on commercial air conditioning installations with some refrigeration installs\n, • Working on splits and multi splits, VRVF and VRF equipment as well as cold rooms and under counter fridges\n, • Working in and around London and M25 area with a few days a day working away for the night helping the installation team\n, • Working with clients such as hotels, bars, restaurants and commercial companies and care homes\n\n \n Experience needed to be a junior air conditioning and refrigeration installation engineer \n \n\n • Living anywhere in the London or greater London area, closer to a tube station the better\n, • Minimum 1 years working on air conditioning installations\n, • You have to be hard working and have a great attitude to learning more on air conditioning installation\n, • They would consider someone that has just qualified or someone nearly finished their level 2 air conditioning cert\n, • F Gas cert needed, and IPAF and PASMA would be beneficial\n\n \n \n For an immediate interview contact Adam Southam \n \n In the event that you are contacted for a role, please note that as part of the registration process you shall be required to provide FRONTrunner Recruitment Ltd. with proof of identity as well as proof of eligibility to work in the United Kingdom.

A growing, independent MSP supporting SMEs across London and the South East are looking for a customer-focused 1 Line Service Desk Engineer to deliver outstanding support, resolve issues at first contact wherever possible, and build the skills to progress into 2 Line. This is office based 4 days a week with the option to WFH on Friday's.What you'll do\n\n • Provide first-line technical support across Microsoft 365, Windows 10/11 and networking.\n, • Resolve incidents and service requests while delivering excellent customer service.\n, • Troubleshoot Microsoft 365, PCs, printers, VPNs, Wi-Fi and connectivity issues.\n, • Monitor and respond to alerts using HaloPSA, NinjaOne and Hudu.\n, • Escalate complex issues with clear diagnostics and accurate documentation.\nWhat we're looking for\n\n, • At least 1 year's commercial IT support experience (MSP experience desirable).\n, • Good Microsoft 365 administration and Windows troubleshooting skills.\n, • Understanding of DNS, DHCP, TCP/IP and VPNs.\n, • Strong communication skills with a genuine customer-first attitude.\n, • A desire to learn, develop and build a career in IT.\nWhy join us?\n\n, • Independent, technically led MSP with no private equity ownership.\n, • Modern automation-first tools that let you solve problems, not just log tickets.\n, • Clear progression into 2nd Line with funded training and certifications.\n, • Annual bonus, birthday leave, Perkbox, weekly team lunches and quarterly socials.\n, • Friendly, supportive team and genuine opportunities to grow as they expand.\nIf you're looking for a 1st Line role where you'll learn quickly, work with modern technologies and have a clear path to the next stage of your career, we'd love to hear from you.

Engineer- Watford Area £45,000 - £62,500 + Package \n engineer, electro-mechanical, location Watford, full-time. \n We are delighted to be partnering with an innovative international engineering business to recruit a technical support engineer as part of its expanding UK support operation. \n Our client is experiencing significant growth and investing heavily in building a first-class technical support team. This is an exciting opportunity for an experienced electro-mechanical engineer who enjoys solving technical challenges, supporting customers, and keeping equipment running without the need for unnecessary site visits. \n In this role, you’ll act as the first point of technical contact for customers and field engineers, using your expertise to diagnose electrical, mechanical, and software issues remotely. \n Providing clear, step-by-step guidance, you will help resolve faults quickly and effectively, maximizing first-time fixes and minimizing downtime. \n Key responsibilities include providing first and second-line technical support, diagnosing faults, guiding field engineers through repairs, supporting equipment commissioning and configuration, maintaining accurate service records, and escalating complex issues when required. About you: You’ll have a strong electro-mechanical background, solid fault-finding skills, good IT literacy, and the ability to interpret electrical drawings and technical documentation. \n Just as important you’ll be a clear communicator who can explain technical information with a logical, methodical approach to problem-solving and a genuine passion for customer service. What’s on offer? \n A competitive salary, comprehensive product training, ongoing professional development, the opportunity to join a growing business during an exciting period of expansion, and a supportive team environment working with innovative technology. \n If you’re an experienced electro-mechanical engineer looking to use your expertise in a technical support capacity, where your problem-solving skills and customer focus will make a real impact, we’d love to hear from you.

Mechanical Design Engineer (Thermodynamics) \n £45,000 - £55,000 + Hybrid + Internal Training + Progression + Company Benefits \n Watford \n Are you a Mechanical Design Engineer with experience in HVAC, thermal management, or liquid cooling systems, looking to join an innovative manufacturer developing next-generation cooling solutions for the rapidly expanding data centre industry? \n On offer is the opportunity to join a specialist engineering company designing and manufacturing cabinets, containment, liquid cooling, and caging solutions for data centres worldwide. \n Your role will centre around the design, analysis, and development of Rear Door Heat Exchanger (RDHx) systems for data centre applications, producing detailed engineering drawings and models using CAD and Revit. \n You will design chilled water distribution systems, develop pipework layouts and control strategies, and ensure seamless integration with high-density server racks. \n This role would suit a Mechanical Design Engineer with experience designing HVAC, chilled water, heat exchanger, or liquid cooling systems, looking to progress into a senior technical role. \n The Role \n\n • Design and develop liquid cooling and Rear Door Heat Exchanger (RDHx) systems for data centre applications\n, • Produce technical drawings and models using CAD and Revit\n, • Carry out thermal modelling, performance analysis, and system optimisation\n, • Mentor junior engineers and provide technical leadership across engineering projects\n, • Monday to Friday, 9 - 5:30\n\n \n The Person \n\n • Degree qualified in Mechanical Engineering or a related discipline\n, • Experience designing HVAC, chilled water, heat exchanger, or liquid cooling systems\n, • Knowledge of Revit and CAD software\n\n \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n \n Reference Number: BBBH26519 \n \n Keywords: Mechanical Design Engineer, Senior Mechanical Design Engineer, Mechanical Engineer, Design Engineer, Product Design Engineer, Project Engineer, Development Engineer, Applications Engineer, HVAC Engineer, Building Services Engineer, Thermal Engineer, Cooling Engineer, Data Centre Engineer, Data Center Engineer, Data Centre Cooling, Data Center Cooling, Liquid Cooling, Rear Door Heat Exchanger, RDHx, Chilled Water Systems, Chilled Water Distribution, Heat Exchangers, Fluid Distribution, Pipework Design, Piping Layout, Hydraulic Design, Hydraulic Systems, Fluid Mechanics, Thermodynamics, Heat Transfer, Thermal Analysis, Thermal Modelling, Airflow Management, Thermal Optimisation, High Density Cooling, Direct-to-Chip Cooling, Immersion Cooling, Rack Cooling, Rack Integration, Mechanical Design, Product Development, New Product Development, Engineering Design, Engineering Drawings, Technical Drawings, 3D CAD, CAD Design, Autodesk Inventor, AutoCAD, Revit, Bills of Materials, BOM, Engineering Change Orders, ECO, Schematics, Hydraulic Diagrams, Design Validation, Factory Acceptance Test, FAT, Site Acceptance Test, SAT, Commissioning, Performance Testing, Validation Testing, Performance Optimisation, Building Management Systems, BMS, Data Centre Infrastructure Management, DCIM, Microsoft Office 365, Manufacturing, OEM \n \n We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. \n \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. \n \n \n \n \n \n \n \n \n \n

PRODUCTION ENGINEER \n Location: BusheySalary: £38,500Shift: 4 on 4 off - Days and Nights \n We are recruiting for a Production Engineer to join a highly regulated GMP manufacturing environment. This is an excellent opportunity for a Production Engineer, Process Engineer, Manufacturing Engineer or experienced Production Technician to join a technically advanced pharmaceutical manufacturing operation. \n Working on a 4 on 4 off days and nights shift pattern, you will be responsible for developing a strong operational understanding of designated manufacturing processes, process flows and equipment. You will operate and support automated and semi-automated production processes while ensuring all activities are completed in compliance with cGMP, product licences, approved procedures, Health & Safety requirements and production KPIs. \n The role will involve working across complex manufacturing processes, including plasma processing, downstream purification, formulation and final product inspection. You will be expected to operate equipment, identify and resolve process issues, complete accurate documentation and support the delivery of production plans while maintaining strict quality and compliance standards. \n Non-Negotiable Requirements for the Production Engineer \n\n • Previous experience working within a GMP, pharmaceutical, biopharmaceutical, biotechnology or other highly regulated manufacturing environment\n, • Experience working with automated or semi-automated manufacturing equipment and controlled production processes\n, • Strong understanding of working to SOPs, cGMP requirements, quality standards and approved manufacturing procedures\n, • Experience working to production plans, quality requirements and KPI targets\n, • Strong problem-solving skills, with the ability to analyse process issues and troubleshoot effectively\n, • Willingness to work a 4 on 4 off days and nights shift pattern\n\n Requirements for the Production Engineer \n\n • Develop a full understanding of designated process flows, manufacturing equipment and the operating environment\n, • Set up and operate automated and semi-automated manufacturing equipment\n, • Operate and troubleshoot processes including centrifugation, filtration and other designated manufacturing processes\n, • Develop an understanding of downstream processing, including chromatography and ultrafiltration\n, • Support plasma processing activities, including the handling and processing of frozen plasma, stripping, thawing and centrifugation operations\n, • Carry out process formulations and ensure critical process samples are taken and submitted correctly\n, • Support sterile transfers of final product to the aseptic filling suite in line with scheduled production plans\n, • Set up and operate inspection equipment and carry out visual inspection of filled bottles and vials for defects\n, • Complete and accurately document quality checks, line clearances, storage records and other critical procedures\n, • Calculate defective product percentages and reconcile components against batch records\n, • Ensure production and process documentation is completed accurately and on time\n, • Maintain clear communication during cross-shift handovers to ensure processes remain compliant and controlled\n, • Identify, investigate and escalate process or equipment issues\n, • Support the Team Leader with specific investigations and problem-solving activities\n, • Support continuous improvement initiatives to achieve quality and productivity targets\n\n Desirable Requirements for the Production Engineer \n\n • Experience with chromatography, ultrafiltration or centrifugation processes\n, • Experience with gas and liquid filtration and troubleshooting filter testing\n, • Experience with Clean-in-Place (CIP) systems\n

The Sureserve Group of businesses provides market-leading compliance and energy services across the UK, with 4000 employees working from over 20 offices.\n \n \nSureserve Compliance South, part of the Sureserve Group, delivers heating services within the social housing sector across London & the South East. We support our clients across domestic gas, commercial gas, renewables, and electrical services. We...\n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

FindCore are thrilled to be assisting a specialist UK manufacturer of equipment with the recruitment of a Mechanical Service Engineer. \n Permanent position. The role will be based from the company’s Holywell site and will involve travelling to customer locations to service, maintain and repair industrial machinery. \n Salary \n Typical annual earnings of £45,000–£60,000, depending on experience, hourly rate and overtime also available \n\n • Enhanced overtime rates + company van + fuel card + expenses + pension + additional benefits\n\n Key Responsibilities \n\n • Attend customer sites to service, maintain and repair equipment.\n, • Diagnose and resolve mechanical and basic electrical breakdowns.\n, • Carry out machine examinations and provide clear condition reports.\n, • Complete repair, renewal and general mechanical fitting work.\n, • Identify faults and provide practical solutions to minimise downtime.\n, • Recommend opportunities to improve machinery productivity and efficiency.\n, • Communicate professionally with customers and internal engineering teams.\n, • Maintain high standards of safety, quality and workmanship.\n\n Skills & Experience \n\n • Strong mechanical engineering, maintenance or service engineering background.\n, • Hands-on experience with industrial machinery or heavy engineering equipment.\n, • Good mechanical fitting and fault-finding ability.\n, • Basic electrical knowledge.\n, • Machining or fabrication experience would be advantageous.\n, • Confident diagnosing breakdowns in a customer-facing environment.\n, • Flexible approach to working hours, travel and overnight stays.\n, • Full UK driving licence.\n\n What’s on Offer \n\n • Typical annual earnings of £45,000–£60,000.\n, • Enhanced overtime payments.\n, • Company van and fuel card.\n, • Hotels and meal allowances covered when working away.\n, • 22 days’ annual leave plus bank holidays.\n, • Workplace pension.\n, • All required tools and PPE provided.\n, • Company-funded certification and safety training.\n, • Long-term opportunity within an established engineering business.\n\n For further information on this opportunity please apply via the link.

A fantastic opportunity to work for a family run Hertfordshire based domestic and commercial heating company that has worked very hard over the years and that is paying off. The company has also just started to do domestic air conditioning installations to capitalise on that growing trend. They are expanding, they have a solid plan and they have stuck to it, this has meant their name is on everyone’s lips and with that…. a lot more work coming through the door. They pride themselves on being able to provide what the big heating companies cant, and people LOVE that about them. Want to be part of this story and progress with them? Read on… \n \n Due to expansion they are looking for an engineer to install domestic and commercial heating systems and domestic air conditioning equipment in people’s homes \n \n\n • 90% of the time covering North west London, North East London and south Hertfordshire with some work being Essex or west London way\n, • Installing domestic and commercial heating systems along with all the relevant pipe work – NO BUILDING SITES\n, • And if you have the experience - Installing domestic air conditioning equipment in people’s homes as well as all of the relevant pipe work\n, • Working with a variety of commercial client across the region such as care homes, churches, NHS sites and of course people’s homes\n\n \n \n Skills Needed to be a Heating & air conditioning engineer \n \n\n • Living in or around the north west London or north east London or south Hertfordshire area\n, • Domestic and commercial gas certificates required as well as UP1A and UP1B\n, • Top tier pipe work skills\n, • Basic electrical skills for wiring up controls\n, • Experience installation domestic and commercial heating systems needed\n, • Experience installing domestic air conditioning systems would be very very beneficial\n, • F gas cert needed\n, • You need a ‘can do’ attitude and be looking for a long term position with good progression\n, • Be able to pass an enhanced DBS check\n, • IPAF and PASMA would be beneficial but not essential\n\n \n * The company would also consider an engineer who has all of the heating installation experience but no domestic air conditioning experience so they can train you on that * \n \n Salary and Benefits of a gas & air conditioning Installation Engineer \n \n\n • 48-53k basic depending on experience\n, • Van, Phone, Fuel card, specialist tools, uniform\n, • 25 days holiday + 8 bank holidays\n, • No weekend rota but A lot of overtime if you want it\n, • Progression as they are wanting to build a team around you\n, • Further training on air conditioning installation\n\n \n \n For an immediate interview contact Adam Southam \n \n \n \n In the event that you are contacted for a role, please note that as part of the registration process you shall be required to provide FRONTrunner Recruitment Ltd. with proof of identity as well as proof of eligibility to work in the United Kingdom.

MAINTENANCE ENGINEERJob Title: Maintenance EngineerLocation: RuislipSalary: £44,000 (OTE £50,000+)Job Role of the Maintenance Engineer.A fantastic opportunity which is not to be missed by strong Maintenance Engineer has come to the forefront. This is going to be any engineer's dream to work in this state-of-the-art, fully automated, fast-paced factory. They have recently invested into the site and it's a great place to work for any maintenance engineer who wants to develop their career both technically and/or into management.You will be responsible for carrying out electrical maintenance, fault-finding, and planned preventative maintenance on a range of fully automated production machinery, ensuring maximum uptime and efficiency.Sector – Factory MaintenanceNon-Negotiable Requirements of the Maintenance Engineer· Electrical maintenance experience within an industrial manufacturing environment.· Hands on experience with pre-planned, reactive and breakdown maintenance in fast paced industrial factory.Requirements for the Maintenance Engineer· Strong Electrical fault-finding skills.· Engineering qualification.· Experience working within a manufacturing environment.Desirable Requirements for the Maintenance Engineer· Experience working within the UK manufacturing sector.The Maintenance Engineer will benefit from:· Employment with a stable and well-established organisation.· Competitive benefits package.· Ongoing training and development opportunities.If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert.For further details contact Antony Edwards at Pioneer SelectionAs a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme.You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further detailsTPBN1_UKTJ

Role Description \n This full-time Field Service Engineer role is based in central London. You will be assigned a specific area to manage, as we believe that getting to know your clients is the most important factor in delivering great service. Your area will predominantly consist of countertop and floor-standing coffee machines, so experience in this category is required. Working with the wider Service Desk and Technical team, you will be visiting sites to conduct PPM, breakdown calls courtesy visits. As we continue to grow, you will also assist in the installation of machines at new sites. \n Key Responsibilities: \n Installation & Maintenance: \n • Install and set up new vending machines at customer sites, ensuring they are fully operational and meet all safety and operational standards \n • Planned preventative maintenance visits across your set area to reduce future breakdown calls \n • Reactive breakdown calls, responding within the agreed SLA for each client \n Troubleshooting & Repairs: \n • Diagnose faults and carry out repairs on vending machines, including electrical, mechanical, and software issues \n • Identify and order necessary spare parts to resolve problems quickly and efficiently \n Customer Interaction: \n • Provide on-site support to clients, explaining machine operations and answering any technical queries \n • Maintain positive relationships with customers, ensuring a professional and helpful approach at all times \n Technical Documentation & Reporting: \n • Complete service reports detailing work completed and any follow-up actions required \n • Maintain accurate records of service visits, machine status, and parts usage \n Requirements: \n • Previous experience in a field service engineer role, preferably within the vending, coffee machines, or related industries \n • Strong technical knowledge of vending machine operations, including electrical and mechanical systems \n • Excellent troubleshooting and problem-solving skills \n • Ability to work independently and manage time effectively \n • Strong customer service skills and the ability to communicate technical information to non-technical users. \n Qualifications: \n • A relevant technical qualification (e.g., electrical, mechanical, or engineering qualifications) is desirable \n • Full UK driving license (No more than 6 points). \n • Previous experience working with vending machines, coffee equipment, or similar systems. Examples include Cimbali, WMF, Coffetek and Evoca machines \n • Knowledge of vending machine software and remote monitoring systems.

A growing, independent MSP supporting SMEs across London and the South East is looking for a talented 2 Line Service Desk Engineer to resolve complex technical issues, deliver infrastructure and Microsoft 365 projects, and help mentor the 1 Line team. This is office based 4 days a week with the option to WFH on Friday's.What you'll do\n\n • Resolve escalated support issues across Microsoft 365, Windows Server, networking and endpoints.\n, • Deliver project work including M365 migrations, Intune deployments and infrastructure upgrades.\n, • Troubleshoot hybrid environments, Active Directory, Entra ID and Intune.\n, • Improve automation, documentation and service quality using HaloPSA, NinjaOne, CIPP and Hudu.\n, • Coach 1 Line engineers and share technical knowledge.\nWhat we're looking for\n\n, • 3+ years' commercial IT support experience, ideally within an MSP.\n, • Strong Microsoft 365, Windows Server and Active Directory knowledge.\n, • Experience with Intune, Entra ID and networking (VPNs, firewalls, routing).\n, • A structured troubleshooting approach and excellent customer service skills.\nWhy join us?\n\n, • Independent, technically led business with no private equity ownership.\n, • Clear progression to 3rd Line and Projects as they grow.\n, • Vendor training and funded certification.\n, • Annual bonus, birthday leave, Perkbox, weekly team lunches and quarterly socials.\n, • Modern equipment and a supportive, collaborative team culture.\nIf you're looking for a role where you'll build your technical skills, work on varied technologies and have genuine opportunities to progress, we'd love to hear from you!

Junior Hardware Engineer (Entry Level - 6-12 Months Experience\n\n Radlett - 5 days a week in office\n\n\n £25,000 per year + Bonus\n\n\n My client, an established and reputable software firm are looking for someone, ideally with 6 months + experience across IT or Hardware to join them on a permanent basis, working onsite in their Radlett office.\n\n\n \n\n\n The role will focus on putting together and building hardware equipment...\n\n\n \n\n\n \n\n \n ZIPC1_UKTJ

Our client is an established Building Services consultancy. They require the support of a 2d Mechanical CAD draughtsman to work with an HVAC / mechanical department. \n The purpose is to support the engineering team by producing new and revising 2d HVAC / Mechanical and Plumbing Health engineering mark-ups and drawings, using AutoCAD. \n Key Responsibilities \n\n • Create and amend basic 2D MEP drawings and layo...\n\n \n ZIPC1_UKTJ

We offer a fantastic job and more\n We are passionate about our profession, and together we can help you realise your full potential. Come and be part of Signet Jewelers and enjoy the following fantastic benefits: \n\n • Competitive salary\n, • Generous discount of up to 30% off our fabulous products from day one.\n, • An annual enhanced discount to celebrate the day you joined our team.\n, • Retirement Savings plans w...\n\n \n ZIPC1_UKTJ

An unusual role offering 'the best of both worlds' combining both being a Workshop Engineer 50% of your time and a Field Service Engineer for the other 50%, for a packaging machinery manufacturer supplying the food industry. BASIC SALARY: up to £45,000 BENEFITS:· Overtime to earn £5,000 to £7,000 · Commission & Bonus on aftersales to earn up to £2,000 · Company Car LOCATION: Home based but you MUST be commutable to the companies UK office near Heathrow airport, as your time as a Workshop Engineer, will be office based. All other time will be field based, covering the UK. COMMUTABLE LOCATIONS: Slough, Uxbridge, Watford, Maidenhead, Hemel Hempstead, Hayes, Amersham JOB DESCRIPTION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, food This is a hybrid Workshop Engineer / Field Service Engineer role, with a 50 / 50 split of your time. As a Workshop Engineer, you will be working on machines pre-installation in the workshop at the companies office and as a Field Service Engineer you will be required to work on client sites and will be responsible for installation, commissioning, repair and refurbishment of machines on sites across the whole UK. Overtime is paid door to door and you can expect to travel and stay away from home 1 to 2 nights per week and to be available to work weekends twice a month if required. PERSON SPECIFICATION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, food · You will be an experienced Workshop Engineer, or a Factory Maintenance Engineer who is now looking for hybrid workshop and field service role. · The company will also consider an experienced Field Service Engineer who would like a better work life balance, spending less time away from home. · Any previous experience of working on packaging machinery and / or of working within the food industry would be advantageous. · You MUST be a qualified Multi Skilled Electrical / Electronic Engineer, having completed at least a full apprenticeship. THE COMPANY: A very well established and market leading manufacturer of packaging machinery supplied to the food industry. INTERESTED? Please click apply. You will receive an acknowledgment of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18598, Wallace Hind Selection

Maintenance Engineer (PLC Training) \n £42,000 - £45,000 + Overtime OTE 60K + Training on Electrical + Funded Qualifications \n Holywell \n Are you a Maintenance Engineer from a manufacturing, industrial or ex-forces background, looking to join an industry leading business that will upskill and develop your career, through full training on PLC's? \n In this role you will be responsible for keeping production lines operational, with the overall maintenance of automation and metal manufacturing machinery. This will involve both mechanical and electrical maintenance on motors, gearboxes, sensors and control panels on a 3-shift rotation. \n This company has been operational since the 1950s, specialising in the niche production of specialist materials, supplying heavily into the aerospace, automotive and chemical industries and are vital for their continued operation. \n This role would suit a Maintenance Engineer with mechanical and some electrical experience looking for a 3-shift role, with full internal training on electrical systems including PLCs. \n The Role: \n\n • Maintenance of automation and manufacturing machinery\n, • Fault finding and maintaining gearboxes, motors, sensors, panels and PLCs\n, • 3 shift patterns: Monday to Friday, 6am - 2pm, 2pm - 10pm, 10pm - 6am, rotating weekly\n, • Overtime available at time ½ on weekdays and double Sunday\n, • Funded qualifications such as level 3 NVQ\n\n The Person: \n\n • Maintenance Engineer\n, • Manufacturing, industrial or ex-forces background\n\n Reference number: BBBH 24260j \n Maintenance, Maintaining, Electrical, Mechanical, Manufacturing, Industrial, Machinery, Engineer, Engineering, Faults, Fault Finding, Motors, Gear Boxes, Censors, Flint, Holywell, Chester, Buckley \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

?? Senior Infrastructure Engineer | Hertfordshire | Hybrid | Azure | SQL | Automation I'm recruiting for a Senior Infrastructure Engineer to join a large organisation within the education sector that's investing heavily in its technology estate and digital transformation. This role would suit someone from an Infrastructure, Application Support, Database Administration, Platform Engineering or Data Engineering background who's looking to broaden their responsibilities and play a key role in modernising enterprise technology. You'll work across infrastructure, databases, enterprise applications and Azure DevOps, helping to improve performance, automate processes and deliver key technology projects that support thousands of users.Key responsibilities: Support and enhance enterprise applications and infrastructure platforms Deliver Azure DevOps and automation initiatives Administer and optimise SQL Server, MySQL and PostgreSQL databases Lead application upgrades, integrations, patching and performance improvements Provide technical leadership, mentoring and 3rd line support across the IT functionWe'd love to hear from you if you have experience with:• Azure or Azure DevOps• SQL Server, MySQL or PostgreSQL• Application or Infrastructure Support• Database Administration (DBA)• Microsoft Dynamics 365 or other enterprise applications• PowerShell, automation or CI/CD• Platform Engineering or Systems Administration This is an excellent opportunity for someone who enjoys solving complex technical problems and wants to transition into a broader infrastructure and DevOps-focused position while working on high-profile transformation projects.Interested? Get in touch for a confidential conversation. #Infrastructure #InfrastructureEngineer #Azure #AzureDevOps #SQLServer #DBA #ApplicationSupport #PlatformEngineer #Cloud #TechJobs #Hiring #Hertfordshire

Senior Python Engineer \n Watford (Hybrid/Flexible Working Available) \n Up to £75,000 + Benefits \n \n About the Role \n We are seeking an experienced Senior Python Engineer to join our growing engineering team in Watford. You'll play a key role in designing, building, and scaling high-performance applications that power critical business functions and customer experiences. \n This is an opportunity to work on challenging technical problems, influence architectural decisions, mentor developers, and help shape the future of our technology platform. \n \n What You'll Be Doing \n\n • Designing, developing, and maintaining scalable Python applications and services\n, • Building robust APIs and microservices architectures\n, • Writing clean, maintainable, and well-tested code\n, • Collaborating closely with Product Managers, Designers, and Engineering teams\n, • Driving best practices in software engineering, code quality, and performance\n, • Participating in architecture reviews and technical decision-making\n, • Identifying and implementing improvements to systems, processes, and tooling\n, • Supporting cloud-native deployments and infrastructure automation\n\n \n \n What We're Looking For \n Essential \n\n • Professional Python development experience (5+ years)\n, • Strong understanding of software design patterns and engineering principles\n, • Experience with frameworks such as FastAPI, Django, or Flask\n, • Solid knowledge of RESTful APIs and distributed systems\n, • Experience working with relational and NoSQL databases\n, • Strong testing experience (PyTest, unit, integration, and automated testing)\n, • Experience with Git and modern CI/CD pipelines\n, • Excellent problem-solving and communication skills\n, • Experience with Azure\n\n \n Desirable \n\n • Docker and Kubernetes experience\n, • Experience with AWS, or Google Cloud\n, • Knowledge of event-driven architectures and message queues\n, • Exposure to data engineering, machine learning, or AI platforms\n, • Experience leading technical projects or mentoring engineers\n\n \n What We Offer \n\n • Competitive salary and performance bonus\n, • Flexible and hybrid working arrangements\n, • Private healthcare\n, • Pension contribution\n, • Learning and development budget\n, • Modern equipment and tools\n, • Clear progression opportunities into Lead and Principal Engineering roles\n, • Cooperative, inclusive, and high-performing engineering culture\n\n RSG Plc is acting as an Employment Agency in relation to this vacancy.

We're looking for an Applications Engineer to become part of our experienced and supportive team. This is a varied role where no two days are the same. One day you could be proving out a brand-new machine for a customer, the next you'll be delivering operator training, developing machining strategies, or demonstrating the latest technology to customers and dealers. BASIC SALARY: £36,000 BENEFITS:· Bonus payments of up to £12k a year - as a result of the company carrying out services, machine sales and demonstrations · 25 days holiday plus bank holidays · Company car · Life insurance · Permanent Health insurance LOCATION: Watford COMMUTABLE LOCATIONS: Ruislip, Harrow, Barnet, Stanmore, Wembley, Luton, Hemel Hempstead, Potters Bar, Welwyn Garden City, Borehamwood, St Albans, Rickmansworth JOB DESCRIPTION: Applications Engineer - Industrial Machinery As our Applications Engineer, you'll play a key role in supporting customers throughout the entire lifecycle of their machines, ensuring they achieve the very best performance from their investment. Your responsibilities will include: · Visiting customer sites across the UK and Ireland to install, set up and prove our machines. · Delivering operator and engineer training for customers and dealer networks. · Developing machining methods, tooling strategies and CNC programs to solve customers' manufacturing challenges. · Supporting the sales team with technical demonstrations, time studies and machining solutions. · Carrying out machine demonstrations for customers and dealers, explaining machining processes in a clear and engaging way. · Installing machines in customer facilities and showrooms. · Testing and commissioning machines to ensure safe, reliable operation. · Providing telephone and on-site technical support for customers and dealers. · Learning new machine technologies and attending manufacturer training courses. · Supporting exhibitions, open days and customer events throughout the UK and Europe. PERSON SPECIFICATION: Applications Engineer - Industrial Machinery We're looking for an Applications Engineer who enjoys engineering just as much as they enjoy helping people. You'll ideally have: · Experience and a proven track record a similar position within CNC machinery or manufacturing. · Strong knowledge of metal cutting processes, tooling and machining methods. · The ability to develop complete manufacturing processes for finished components. · Excellent problem-solving skills and a practical engineering mindset. · Confidence communicating with customers, operators and colleagues. · The ability to work independently while also thriving as part of a collaborative engineering team. · A willingness to travel throughout the UK, Ireland and occasionally overseas. THE COMPANY: We are a world leading CNC machine tool manufacture supplying the latest CNC mill-turn technology to UK industry. We have been successfully serving UK manufacturing industry since 1974, famous also for our precision watches and electronics. Our products encompass our extensive range of high performance including sliding and fixed head CNC lathes. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the recruitment partner of our client. REF: AM18602, Wallace Hind Selection

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n Senior DevOps Engineer Location: WatfordWorking Pattern: Primarily office-basedSalary: £51,000 per annumHours: Monday to Thursday 08:30 - 17:00, Friday 08:30 - 16:30Reporting To IT Project Manager About the Role We are seeking an experienced Senior DevOps Engineer to support the development, delivery, and continuous improvement of DevOps services, cloud platforms, business applications, and technology projects. This is a senior technical role that combines DevOps engineering, application support, database management, cloud infrastructure, data warehousing, and technical leadership. You will work closely with IT Operations, Project Management, business stakeholders, and third-party suppliers to ensure critical systems remain secure, reliable, scalable, and performant. The successful candidate will also provide mentoring and technical guidance to DevOps Engineers while supporting the organisation's digital transformation strategy. Key Responsibilities DevOps & Cloud Engineering \n \n • Support the implementation and continual improvement of the DevOps function, including Microsoft Azure DevOps.\n, • Design, build and maintain CI/CD pipelines and deployment automation processes.\n, • Maintain documented code repositories, configurations and infrastructure standards.\n, • Work closely with infrastructure teams to ensure platforms are secure, resilient and optimised.\n, • Identify opportunities to automate processes and reduce manual operational effort.\n Applications & Platform Support \n \n, • Act as technical architect and subject matter expert for business-critical applications.\n, • Support application integration, upgrades, patching, optimisation and release management.\n, • Provide application support for core and non-core business systems.\n, • Collaborate with business owners and third-party vendors on troubleshooting and enhancements.\n, • Ensure applications are monitored, documented and maintained to minimise technical debt.\n Data & Database Management \n \n, • Support the design, implementation and enhancement of enterprise data warehouse solutions.\n, • Lead Extract, Transform and Load (ETL) processes and activities.\n, • Create, configure, maintain and support databases and database services.\n, • Optimise database performance, security and reliability.\n, • Support data integrations and reporting platforms.\n Infrastructure & Systems Support \n \n, • Provide platform support for applications and operating systems.\n, • Support system builds, upgrades, releases, patching and fault resolution.\n, • Maintain and optimise environments including: \n \n, • SQL Server\n, • MySQL\n, • PostgreSQL\n, • Microsoft Dynamics 365\n, • Learning Management Systems\n, • Student Information Systems\n, • Business Information Systems\n \n Incident, Change & Service Management \n \n, • Act as part of the DevOps resolver team, resolving incidents and service requests within agreed service levels.\n, • Provide third-line technical support and escalation assistance.\n, • Participate in major incident management and root cause analysis.\n, • Maintain accurate records within the IT Service Management (ITSM) platform.\n, • Act as a permanent member of the Technical Change Board.\n, • Provide occasional out-of-hours support for critical incidents and upgrades.\n Project Delivery \n \n, • Support the delivery of strategic technology projects and programmes.\n, • Lead technical workstreams and project activities where required.\n, • Produce and maintain project documentation.\n, • Ensure solutions align with technical standards and organisational objectives.\n Leadership & Mentoring \n \n, • Mentor and support DevOps Engineers and technical team members.\n, • Contribute to technical skills development and knowledge sharing.\n, • Assist in maintaining technical skills matrices and training plans.\n, • Promote best practices across DevOps, cloud engineering and application support.\n, • Deputise for senior technical leadership when required.\n Key Skills & Experience Essential \n \n, • Strong experience with Microsoft Azure and Azure DevOps.\n, • Experience building and maintaining CI/CD pipelines.\n, • Experience supporting enterprise applications and business systems.\n, • Strong database administration and support experience.\n, • Experience with SQL Server, MySQL and PostgreSQL.\n, • Knowledge of ETL processes and data warehousing concepts.\n, • Experience with cloud infrastructure, automation and Infrastructure as Code.\n, • Strong troubleshooting and third-line support experience.\n, • Experience with monitoring, logging and application performance management.\n, • Scripting and automation skills.\n, • Experience working within Agile and DevOps environments.\n Desirable \n \n, • Microsoft Dynamics 365\n, • Data Warehouse technologies\n, • Learning Management Systems\n, • Terraform\n, • Kubernetes\n, • PowerShell\n, • Azure Data Factory\n, • Azure SQL\n, • Microsoft Fabric\n, • Cloud security and governance experience\n General Responsibilities \n \n, • Participate in training, development and continuous professional development activities.\n, • Maintain awareness of current technologies, industry trends and best practices.\n, • Promote equality, diversity and inclusion.\n, • Comply with all health, safety, safeguarding and security requirements.\n, • Deliver a consistently high standard of customer service.\n, • Undertake additional duties as reasonably required by management.\n Benefits & Additional Information \n \n, • Salary of £51,000 per annum\n, • Primarily office-based role in Watford\n, • Working hours 08:30 - 17:00 Monday to Thursday\n, • Early finish of 16:30 on Fridays\n, • Opportunity to work on cloud transformation, data warehouse development, DevOps automation, and enterprise applications within a broad technology environment.\n Please note: The responsibilities outlined above are not exhaustive and may be amended from time to time to meet business requirements. They do not form part of any contract of employment.\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n Provide your feedback on BizChat\n \n \n \n \n \n \n \n \n \n \n

Job Title: AI Trainee Engineer – £45,000–£75,000 – Job Programme This is a self-funded programme that leads to employment, fees apply. Job Guarantee Complete the programme and get a job, or get your course fees back. Looking to start a career in AI Engineering? We are offering a structured pathway into AI Engineering, designed to help you enter one of the fastest-growing sectors in tech with no prior experience. This opportunity includes training, support, and access to our specialised recruitment support for job roles across the UK. No prior experience required. Train online at your own pace and become job-ready in as little as a few weeks. Our programme includes: • Official AWS Certified Cloud Practitioner certification • Training in Python, Machine Learning, and AI systems • Hands-on projects using real-world AI tools and technologies • Professional CV and LinkedIn support • Interview preparation • Dedicated recruitment support until placed • Personalised 1-1 tutor support • Hands-on projects to build your AI portfolio Flexible, affordable, achievable To make things easier, we offer flexible payment options, allowing you to spread the cost of your training over 12 months so you can get qualified without financial pressure. Salary expectations: • AI Engineer: £45,000 – £60,000 • Machine Learning Engineer: £60,000 – £75,000 • Progression into senior AI roles with higher earning potential We support you into employment We focus on outcomes, not just training. ITOL Recruit has over 15 years of experience supporting candidates into roles across AI, machine learning, and data science roles. From the beginning of your journey to the end, you are supported by qualified tutors, and at the end, our specialised recruitment team helps you secure your first job role. Apply now to get started.

An unusual role offering 'the best of both worlds' combining both being a Workshop Engineer 50% of your time and after training a Field Service Engineer for the other 50%, for a packaging machinery manufacturer supplying the food industry. BASIC SALARY: up to £48,000 BENEFITS:· Overtime to earn £5,000 to £7,000 to earn circa £55,000 · Commission & Bonus on aftersales to earn up to £1,000 · Company Car LOCATION: Home based but you MUST be commutable to the companies UK office near Heathrow airport, as you will be office based. After training you will be office based 50% & field based 50%, covering the UK. COMMUTABLE LOCATIONS: Slough, Uxbridge, Watford, Maidenhead, Hemel Hempstead, Hayes, Amersham JOB DESCRIPTION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, food After you have completed your training, this role will become a hybrid Workshop Engineer / Field Service Engineer role, with a 50 / 50 split of your time. As a Workshop Engineer, you will be working on machines pre-installation in the workshop at the companies office and after training as a Field Service Engineer you will be required to work on client sites and will be responsible for installation, commissioning, repair and refurbishment of machines on sites across the whole UK. Overtime is paid door to door and you can expect to travel and stay away from home 1 to 2 nights per week and to be available to work weekends twice a month if required. PERSON SPECIFICATION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, food · You will be an experienced Workshop Engineer, or a Factory Maintenance Engineer who is now looking for hybrid workshop and field service role. · The company will also consider an experienced Field Service Engineer who would like a better work life balance, spending less time away from home. · Any previous experience of working on packaging machinery and / or of working within the food industry would be advantageous. · You MUST be a qualified Multi Skilled Electrical / Electronic Engineer, having completed at least a full apprenticeship. THE COMPANY: A very well established and market leading manufacturer of packaging machinery supplied to the food industry. INTERESTED? Please click apply. You will receive an acknowledgment of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18623, Wallace Hind Selection

We're looking for an Electrical / ICA Engineer to join our Thames Water Major Projects team based on our Maple Lodge site in Rickmansworth.Location: Maple Lodge, Rickmansworth- remote working available, with occasional travel to the office required.Hours: 45 hours per week - some flexibility on hours available if desired, just let us know when you speak to us.We are unable to offer certificates of sponsorship to any candidates in this role.As an Electrical/ICA Engineer, you'll be providing LV Electrical, Control & Automation, and PLC & SCADA engineering expertise for industrial projects within the water industry. Working as part of our Thames Water Major Projects team, you'll collaborate with colleagues to deliver high-quality solutions for new and existing infrastructure across the region. This is an excellent opportunity for a quality-focused professional with a proven track record in managing Electrical ICA works on major projects.What will you be responsible for?As an Electrical / ICA Engineer, you'll be working within the Thames Water Major Projects team, supporting them in delivering electrical and ICA engineering solutions for water treatment projects. Your day to day will include:Reviewing and providing constructive feedback on LV Electrical and ICA documentation, including MCC/RTU electrical schematics, control philosophies, and SCADA architecture drawings, ensuring compliance with water industry asset standards (WIMES)Representing Kier at client meetings and conducting technical reviews of electrical and ICA installations and commissioning works on siteConducting fault finding and system configuration for MCC and ICA equipment including PLCs and control panels, and overseeing installation of communication networksAttending Factory Acceptance Tests for MCC/RTU builds, SCADA and PLC control software, ensuring products meet all design criteria and operational requirementsEngaging with the supply chain to provide innovative proposals and supporting contractors whilst ensuring company standards in health & safety, environmental, and quality are maintainedWhat are we looking for?This role of Electrical / ICA Engineer is great for you if:You hold an HNC qualification in Electrical/Electronic or Instrumentation Engineering, or a similar disciplineYou have experience in ICA engineering, PLCs, HMIs, Profibus networks, and SCADA installations on large-scale water treatment worksYou possess a good knowledge of Low Voltage large motor control centres and associated ICA sections, and understand various communications protocols such as Profibus, Modbus, and Ethernet IPYou have experience of contractor management and setting people to work safely, with strong interpersonal skills and the ability to work as part of a multi-discipline teamYou hold a Full driving licence and have knowledge and experience with WIMES and UK water industry standardsWe're all about finding potential here at Kier, and transferrable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat.Rewards and benefitsWe're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here.Diversity and inclusionMaking Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview.We look forward to seeing your application to #joinkier #LI-CH1TPBN1_UKTJ

Senior Project Engineer - MEP \n Rickmansworth / West London \n Hybrid working - typically three days on site or in the office and two days from home \n Up to £99,830 DOE + 12 % Pension, 33 days holiday + Progression \n Full-time / Permanent \n Are you a Senior Project Engineer, Engineering Manager or MEP Design Manager with experience coordinating complex MEP design and technical assurance within major rail infrastructure? \n This is a senior client-side engineering role supporting the delivery of MEP works across five tunnel shafts on a major UK infrastructure programme. \n With the civil engineering phase substantially complete, the focus is now on progressing MEP design into installation, followed by testing and commissioning. You will coordinate designs, manage technical interfaces and provide engineering guidance to ensure the package is properly assured and ready for delivery on site. \n You will work closely with designers, contractors, technical specialists and wider rail systems teams, challenging proposals where required and helping resolve complex engineering and interface issues. \n The Role: \n\n • Providing engineering leadership across a major multidisciplinary MEP package\n, • Coordinating mechanical, electrical and public health designs\n, • Leading technical assurance and design reviews\n, • Managing interfaces between MEP works and wider railway systems\n, • Providing technical guidance to contractors, designers and delivery teams\n, • Reviewing design changes and resolving engineering risks\n, • Supporting design acceptance and approval processes\n, • Providing engineering input during installation, testing and commissioning\n, • Supporting NEC and technical change processes where required\n, • Permanent position with long-term progression across a major infrastructure programme\n\n The Person: \n\n • Significant MEP engineering experience across mechanical, electrical, public health or related systems\n, • Experience as an Engineering Manager, Senior Project Engineer, Design Manager or similar\n, • Previous experience within a rail environment\n, • Strong design coordination and technical assurance experience\n, • Experience managing multidisciplinary engineering interfaces\n, • Experience taking designs through review and into construction\n, • Good understanding of installation, testing and commissioning\n, • Confident challenging contractors, designers and technical specialists\n, • NEC experience or knowledge would be beneficial\n, • Major rail, tunnelling or station experience would be advantageous\n\n \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Maintenance Engineer (Progression to Team Leader) \n £42,000 - £45,000 + Overtime OTE 60K + Training on PLCs + 6% Pension + Funded Qualifications + 33 Days Holiday \n Holywell \n Are you a Maintenance Engineer or similar, looking to join a thriving and rapidly growing global company, offering you a fantastic opportunity to kickstart your career in management, with rapid progression to a Team Leader position? \n On offer is a great opportunity to step into management with a company that will value your development through NEBOSH, IOSH and PLC training and plenty of overtime to significantly boost your earnings. \n In this role you will be responsible for leading a team of Engineers for this long-standing manufacturer. You will also plan maintenance activities, keep records up to date, inspect machinery and maintenance, manage budgets and undertake hands on mechanical and electrical repairs. \n This company has been operational since the 1950s, specialising in the niche production of specialist materials, supplying heavily into the aerospace, automotive and chemical industries and are vital for their continued operation. \n This role would suit a Maintenance Engineer or similar with mechanical and some electrical experience looking for a leadership position where they can progress further into management. \n The Role: \n\n • Leading a team of Maintenance Engineers\n, • Plan all maintenance activities, ensure records are kept up to date and manage budgets\n, • Perform inspections of machinery and works being carried out\n, • Undertake hands on mechanical and electrical repairs\n, • Training on PLCs, NEBOSH and IOSH\n, • Monday to Thursday 8:15 am-5pm and Friday 8:15-1pm. Overtime available paid at t ½\n\n The Person: \n\n • Maintenance Engineer or similar\n, • Looking for progression to a Team Leader\n\n Reference number: BBBH 26784a \n Maintenance, Maintaining, Electrical, Mechanical, Manufacturing, Industrial, Machinery, Engineer, Engineering, Faults, Fault Finding, Motors, Gear Boxes, Censors, Chester, Wrexham, Prestatyn, Rhyl \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Project Engineer - MEP \n Rickmansworth / West London \n Hybrid working - typically three days on site and two days from home or another office \n Up to £71,000 DOE + 12% Pension, 33 Days Holiday + Progression \n Full-time / Permanent \n Are you an MEP Project Engineer, Field Engineer or M&E Engineer with experience overseeing complex installation, testing and commissioning works? \n This is an opportunity to join a major UK infrastructure programme as it moves from completed civil engineering works into a significant phase of MEP installation across five tunnel shafts. \n You will provide client-side technical and construction assurance, with a strong site presence reviewing installation quality, checking works against approved designs and supporting testing and commissioning activities. \n Working closely with contractors, designers and technical specialists, you will help identify and resolve engineering issues while ensuring works meet the required technical, quality and assurance standards. \n The Role: \n\n • Providing client-side technical assurance across major MEP works\n, • Overseeing MEP installation across five tunnel shafts\n, • Reviewing works against approved designs, specifications and standards\n, • Identifying technical issues, defects and non-compliance\n, • Supporting inspections, testing and commissioning activities\n, • Working with contractors and engineering teams to resolve site issues\n, • Supporting NEC Supervisor and construction assurance responsibilities\n, • Reviewing drawings, technical submissions and engineering evidence\n, • Permanent position with long-term progression across a major infrastructure programme\n\n The Person: \n\n • Strong MEP experience across mechanical, electrical, public health or building services\n, • Experience overseeing complex MEP installation, testing and commissioning within a live construction environment\n, • Previous experience within rail, tunnelling or similarly complex major infrastructure\n, • Strong understanding of construction and technical assurance\n, • Confident reviewing works and challenging contractors where required\n, • Experience as a Project Engineer, Field Engineer, MEP Engineer or similar\n, • Able to interpret engineering drawings, specifications and technical requirements\n, • NEC Supervisor experience or knowledge would be beneficial\n, • Experience within major rail, tunnelling or station environments would be advantageous\n\n \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Our client, a fast-growing, technically driven Managed Service Provider (MSP) is looking for a 1st Line Support Engineer to join their expanding team. This is an exciting opportunity to join a company who invest heavily in their technical team and will enable you gain exposure to a wide range of technologies while developing your skills within a collaborative, forward-thinking environment. \n This role is based at our client’s offices easily accessible to the North London / Hertfordshire areas. \n As a 1st Line Support Engineer, you’ll be the first point of contact for technical issues across a diverse client base. You’ll work closely with the 2nd and 3rd line teams, ensuring smooth resolution of incidents and providing excellent customer service at all times. \n Role responsibilities \n Handling incoming support tickets, telephone, and email queries. Providing remote technical support to clients. Troubleshooting user issues across Windows operating systems, Office 365, and networking environments. Escalating complex issues to the 2nd Line team when required. Assisting with system maintenance, monitoring, and documentation. \n Candidates will have: \n\n • Previous experience in a 1st Line or Service Desk role, within a commercial setting\n, • Proficient with Windows 10/11 and Microsoft Office 365.\n, • Working knowledge of Intune, Jamf, SharePoint, Teams setup and Azure admin.\n, • Familiar with hosted telephony systems and Windows Server, including GPO, AD, File Servers, and other server roles.\n, • Previous experience with Windows OS (7, 8, and 10) and understanding of basic networking tools\n, • Excellent communication and problem-solving skills with a customer-first mindset.\n, • A drive to learn, develop, and progress within a technical environment.\n\n The salary for this role ranges from £28,000 to £32,000 depending on experience. \n \n

Job Summary \n Autel UK is seeking a proactive and customer-focused EV Charger On-Site Maintenance Engineer to provide field-based technical support for Autel EV charging products across the UK and Ireland. \n The role will cover installation support, commissioning, preventive maintenance, fault diagnosis, and timely issue resolution to ensure safe, reliable charger operation and excellent customer experience. \n \n Key Responsibilities \n\n • Provide on-site technical support for Autel EV charging products, including installation guidance, commissioning, maintenance, troubleshooting, and after-sales service.\n, • Carry out routine inspections, preventive maintenance, fault diagnosis, and corrective repairs for AC/DC EV chargers and related low-voltage electrical systems.\n, • Respond to customer technical issues and service requests, ensuring timely resolution and clear communication.\n, • Support project delivery, including site assessments, system testing, commissioning, technical acceptance, and handover.\n, • Collaborate with internal R&D, product, and technical teams to report field issues and support product improvements.\n, • Prepare service reports, maintenance records, troubleshooting documents, and technical case summaries.\n, • Deliver technical training and operational guidance to customers, partners, and internal teams when required.\n, • Ensure all work complies with UK and Ireland electrical regulations, health and safety requirements, and company procedures.\n\n \n Required Qualifications and Experience \n\n • Fully qualified electrician with recognised UK or Ireland electrical qualifications and proven experience in commercial or industrial electrical environments.\n, • Experience in EV charging infrastructure, electrical maintenance, new energy, field service, or a related technical environment.\n, • Strong understanding of EV charging systems, electrical distribution, low-voltage electrical equipment, and field maintenance processes.\n, • Familiarity with UK and Ireland electrical standards, safe working practices, and health and safety requirements.\n\n \n Electrical Certifications and Compliance Requirements \n\n • Level 3 electrical installation or maintenance qualification, such as City & Guilds 2365/2330, EAL Level 3, NVQ Level 3, or equivalent.\n, • Current BS 7671 Wiring Regulations qualification, commonly known as the 18th Edition.\n, • Inspection and testing qualification, such as City & Guilds 2391, 2394/2395, or EAL equivalent.\n, • Electrical safe isolation training and practical competence in lock-out/tag-out procedures, risk assessments, method statements, and permit-to-work processes.\n, • EV charging installation qualification, such as City & Guilds 2919/2921, EAL EV charging qualification, or equivalent, is highly desirable.\n, • Full UK driving licence and willingness to travel frequently across the UK and Ireland.\n, • Fluent English communication skills; additional European languages are advantageous.\n\n \n Preferred Qualifications \n\n • Experience working with AC chargers, DC fast chargers, and/or energy storage systems.\n, • Knowledge of smart charging, load management, renewable energy integration, and grid-interactive charging solutions.\n, • Experience supporting partners, installers, charge point operators, or fleet customers.\n\n \n Key Competencies \n\n • Field service excellence and customer orientation.\n, • Strong electrical safety awareness and disciplined working practices.\n, • Technical troubleshooting and root cause analysis.\n, • Clear reporting, documentation, and stakeholder communication.\n, • Ownership, accountability, and continuous improvement mindset.\n, • Autel is committed to delivering reliable and innovative EV charging solutions while maintaining high standards of safety, service quality, and customer satisfaction.\n\n \n Location: Watford, United Kingdom, with travel across the UK & Ireland \n Start Date: Negotiable \n Working Hours: Full-time \n \n Contact: Apply directly on LinkedIn or send your resume to recruitment1.eu@autel.com \n Apply now and join Autel to create a smarter future together!