Trabajos Engineering en RochdaleCrear alertas

This large independent lift company are currently seeking an NVQ Level 3 qualified Lift Repair Engineer to support them in their growing team covering the Manchester area. Overtime is available. \n In this role you will be responsible for: \n\n • Carry out repairs, breakdowns, and call outs when necessary\n, • Provide fault finding skills\n, • Provide repair solutions on breakdowns\n, • Adhere to quality, health and safety sta...\n\n \n ZIPC1_UKTJ

Fire Alarm Engineer \n Were looking for a skilled Fire Alarm Engineer with proven experience in installation, servicing, and fault-finding across a range of fire systems. \n Essential: \n\n • Strong knowledge of fire alarm systems, servicing, and fault diagnosis\n, • Good understanding of BS 5839 (Part 1 & Part 6)\n, • Full UK driving licence\n, • Excellent problem-solving skills and attention to detail\n, • Strong communication and cus...\n\n \n ZIPC1_UKTJ

Product Compliance Engineer Rochdale area | Hybrid WFH - 2 days from home a week \n £50,000 to £60,000 \n How do you know the products you use are safe? In most cases, the answer is product compliance. In hazardous industries such as oil and gas, chemical and pharmaceutical, it is compliance engineers who make sure electronic equipment can operate in explosive atmospheres without becoming the ignition s... \n \n ZIPC1_UKTJ

JOB TITLE: HVAC Engineer / Air Conditioning EngineerSALARY: £38 - £52,000k dependent on experience inc 1 hour travel, van/fuel card + overtime, 23 days annual leave + bank holidays - 80p/hour extra for attendance bonus (£1,700/annum on top of salary)LOCATION: manchester & surroundingJOB INFORMATION -HVAC Engineer / Air Conditioning EngineerWorking on a mobile basis you would be responsible for carrying out service, and preventative planned maintenance according to schedules on a wide range of air conditioning appliances,As an Air conditioning Engineer / HVAC Engineer you would carry out maintenance on systems such as VRV's, VRF's, Splits and multi-split systems etc.Some installations works on occasionCovering in and around the Manchester and surrounding area you would be responsible for delivering an excellent customer service to a large gym contract, hotels, offices, cinemas, and other sites of a commercial nature.Overtime is available and plentiful.Van provided along with tools - can be used for personal useOn call 1 week in 9 with standby allowance and overtime rates paid door to door at overtime ratesCOMPANY INFORMATION - HVAC engineer / Air Conditioning EngineerReputable and well-established business specialising in air conditioning/HVAC/mechanical contracts. Specialising in gas, mechanical plant and electrics relating to the mechanical/heating systems such as controls etc.Close working relationships with high profile clients meaning long term contracts and job security.The business encompasses all aspects of installation, service and reactive maintenance on a wide range of appliances for clients of a commercial natureOperating a team of multi skilled engineers across the UK, our client is committed to training and developing their high calibre staff.Excellent reputation for delivering quality and high standards of service.CANDIDATE INFORMATION - HVAC Engineer / Air conditioning engineerGood customer services skills, well-presented and articulate with the ability to build trust and rapport with clients.The ideal candidate will have good trouble shooting skills with the ability to accurately identify faults on VRV systems, VRF's, splits, AHU's and so on.Recognised air conditioning qualifications including F-Gas, City & Guilds NVQAs an air conditioning engineer you will have experience of working on air conditioning service and maintenance contracts previouslyGood working knowledge/ trouble shooting skills on a wide range of air conditioning appliances including splits, VRV, VRF, Split systems etc.Motivated and trustworthyMust be looking to progress with a forward thinking up and coming business.This role is paid door to door (at overtime rates)TPBN1_UKTJ

Production Engineer \n Greater Manchester \n Competitive Salary + Benefits \n Permanent \n 37.5 hrs per week (Mon-Thurs 8am to 4:30pm, Fri 8am to 2pm) \n Are you an experienced Production Engineer looking for your next challenge within a well-established engineering and manufacturing environment? \n Our client, a leading manufacturer operating within the medium to heavy engineering sector, is seeking a skilled Production Engineer to join their growing team. This is an excellent opportunity to play a key role in improving manufacturing processes, supporting production operations, and driving continuous improvement initiatives. \n Production Engineer Role: \n Reporting to the Production Engineering Manager, you will provide technical support across all areas of production, ensuring manufacturing processes are efficient, cost-effective, and delivered to the highest quality standards. \n Production Engineer Key Responsibilities: \n\n • Create and maintain manufacturing process specifications\n, • Develop and manage routings, BOMs, production orders, and costings\n, • Support manufacturing operations with technical expertise and problem-solving\n, • Optimise production processes to improve efficiency, capability, and yield\n, • Utilise CAD software, including SolidWorks, for engineering and manufacturing support\n, • Work closely with Purchasing, Engineering, Production, and other stakeholders\n, • Support continuous improvement, lean manufacturing, and waste reduction initiatives\n, • Ensure compliance with health and safety procedures at all times\n\n Production Engineer – What We Want: \n We are looking for a motivated and experienced Production Engineer who can work independently while contributing effectively within a team environment. \n Essential Production Engineer Skills & Experience \n\n • Minimum 5 years' experience within a Production Engineering or Manufacturing Engineering role\n, • Experience within a medium to heavy engineering environment\n, • Strong understanding of CNC machining processes, including:\n \n, • 4 and 5-axis machining\n, • CNC lathes\n \n, • Ability to read and interpret engineering drawings\n, • SolidWorks 3D CAD experience\n, • Experience creating BOMs, routings, and manufacturing documentation\n, • Knowledge of ERP systems, ideally SAP\n, • Strong project management and problem-solving skills\n, • Excellent communication and organisational abilities\n\n Desirable Production Engineer experience \n\n • Knowledge of hard surface welding methods\n, • Experience preparing manufacturing costings\n, • Lean manufacturing and continuous improvement experience\n\n Production Engineer Qualifications \n\n • Engineering apprenticeship or equivalent machining-based qualification\n, • HNC/HND in Mechanical Engineering, Production Engineering, or similar discipline preferred\n\n What's on Offer for a Production Engineer \n\n • Permanent position with a respected engineering manufacturer\n, • Opportunity to work on technically challenging projects\n, • Career development and progression opportunities\n, • Supportive and collaborative working environment\n, • Competitive salary and benefits package\n\n If you're a Production Engineer looking to take the next step in your career, we'd love to hear from you. \n Apply today with your CV for immediate consideration. \n To view more jobs from Bamford Contract Services, Find us on Facebook bamfordcs or follow us on Twitter bamfordcs.

Senior Test Engineer \n Location: Bristol, Swansea, Leeds, Nottingham, Newcastle, Oldham (Chadderton), Birmingham(Garretts Green) or Uxbridge. \n Salary: £44,241 per annum (Plus an additional Government Digital and Data Profession allowance (non-pensionable) up to £14,756.) \n Vacancy Type: Permanent,Flexible working, Full-time, Job share, Part-time \n Closing Date: 1 of September 2026 \n The central responsibility of this role is for delivering excellent, scalable automated and manual testing capability and providing overall direction and management of software testing, while ensuring that technology standards are defined and followed to meet users’ needs efficiently and reliably. \n You will perform gap analysis on current testing processes, competencies and capacity and implement plans to remove identified gaps, while keeping abreast of new technology patterns and trends to lead the evolution of test standards, tools, and processes. \n The focus will be on building in quality from the start and testing throughout development phases. \n Joining our department comes with many benefits, including: \n\n • Employer pension contribution of 28.97% of your salary.\n, • 25 days annual leave, increasing by 1 day each year of service (up to a maximum of 30 days annual leave), plus 8 bank holidays a privilege day for the King’s birthday\n, • Flexible working options where we encourage a great work-life balance.\n\n Job description \n Your responsibilities will include, but aren’t limited to: \n\n • Managing all test processes, including test plans, resources, costs, timescales, test deliverables and traceability.\n, • Coordinating, managing, and communicating the planning of the system and/or acceptance tests within a development or integration project / programme.\n, • Providing authoritative advice and guidance on any aspect of test planning and execution.\n, • Building tests to a standard that allows multiple use.\n, • Serving as coach and mentor to individuals in the service assurance team to ensure that the team is appropriately trained and up to speed regarding methodologies, policies, and tools.\n, • Providing input to the environment requirements, setup, manage, maintain, and ensure test data & environments are available to satisfy project and/or work package test requirements.\n\n Great line management is important to us as an organisation, and we will equip and support line managers to develop the skills they need. We aim to empower line managers to create teams where people can flourish and deliver excellent outcomes for the public. \n For further information on the role, please read the role profile. Please note that the role profile is for information purposes only - whilst all elements are relevant to the role, they may not all be assessed during the recruitment process. This job advert will detail exactly what will be assessed during the recruitment process. \n Person specification \n To be successful in this role you will need to have the following experience: \n\n • Experience in testing within a large-scale ICT estate, including integrating new and legacy products.\n, • Experience building test frameworks and detailed knowledge of at least one programming language (we use a range of languages including Java, JavaScript, Groovy and Scala) and awareness of front-end web development (CSS/HTML).\n, • Ability to quickly research and learn new programming tools and techniques, learn by proof of concepts and iteration.\n, • Ability to mentor and coach other QA & testing colleagues.\n\n Additional Information \n\n • Working hours, office attendance and travel requirements\n, • Full time roles consist of 37 hours per week.\n, • Whilst we welcome applications from those looking to work with us on a part time basis, there is a business requirement for the successful candidate to be able to work at least 30 hours per week.\n, • Occasional travel to other offices will be required, which may involve overnight stays.\n, • This role is suitable for hybrid working, which is a non-contractual arrangement where a combination of workplace and home-based working can be accommodated subject to business requirements.\n\n To Apply \n If you feel you are a suitable candidate and would like to work for DVSA, please click apply to be redirected to our website to complete your application.

In your role as a Field Service Engineer, you will be home based travelling to customer sites daily to undertake work. You will utilise your technical knowledge and experience to calibrate, commission and repair on site weighing systems using the following F1 & M1 test weights, stamped flow meter, force calibration test rigs & multi-function processor. You will also undertake additional training to support the company’s range of products including beltweigher and boiler leak detection products, together with the specific calibration disciplines of, temperature, conductivity, PH, pressure & magnet strength. \n DUTIES & RESPONSIBILITIES: \n • Carry out pre-scheduled calibrations / breakdowns / commissioning of on-site process weighing systems \n • Calibration of temperature controllers & probes, pressure gauges, PH & conductively probes \n • Installation & calibration of in-line belt weighing systems & boiler leak detection systems \n • Off site repair of scales and balances \n • It is essential that you are motivated driven and prepared to work unaccompanied and under your own initiative \n • Preparation of service call reports, calibration certificates etc. before leaving site \n • All activities you undertake must comply with all NOV/Procon Engineering HSE policies and procedures \n • You will be required to visit Procon Engineering HQ from time to time for training, or to assist will final assembly and testing \n • You will be expected to be available for one Saturday in three to cover essential weekend scheduled site work \n • On some occasions you will be required to work with or assist another engineer \n • When required you will be expected to stay over-night to undertake site work \n • Any other reasonable duties in support of your role as service engineer

CAD Technician - Mechanical \n Middleton, Greater Manchester (Commutable from Oldham, Bury, Heywood, Bolton, Manchester) \n £35,000 to £40,000 + Annual Bonus + Flexible Hours + Early Finish Fridays + Health Cash Plan + Excellent Company Benefits \n Are you a CAD Technician with SolidWorks experience looking to join a well-established manufacturer where you'll work on a wide variety of bespoke projects from concept through to production? \n This is a fantastic opportunity to join a successful company where you'll become part of a friendly, collaborative design team, working on interesting customer-led projects while developing your technical skills and enjoying excellent long-term job security. \n This company has over 30 years of success designing and manufacturing innovative bespoke products for customers across a range of industries. Known for its modern working environment and supportive culture, the business is continuing to grow and is looking to expand its design team. \n In this role you will produce detailed SolidWorks models and manufacturing drawings for bespoke products, working closely with sales, procurement, production and project management to ensure projects are delivered accurately, on time and to the highest standard. \n This role would suit a CAD Technician or Mechanical Design Engineer with SolidWorks experience looking for a varied role with a stable, growing business. \n The Role: \n\n • Producing detailed SolidWorks models and manufacturing drawings\n, • Designing bespoke products from concept through to manufacture\n, • Working closely with sales, procurement, production and project management teams\n, • Flexible working hours Monday to Thursday with an early finish every Friday\n\n The Person: \n\n • SolidWorks experience\n, • Mechanical design experience\n, • Experience producing detailed manufacturing drawings\n, • Looking for a long-term permanent opportunity\n\n Reference Number: BBBH276272 \n To apply for this role or to be considered for further roles, please click "Apply Now" or contact Matilda Hocknell at Rise Technical Recruitment. \n \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

ELECTRICAL MAINTENANCE ENGINEER \n Job Title: Electrical Engineer \n Location: Oldham \n Salary: £38,000 - £41,000 \n Shift: Days - 1pm finish on Fridays! \n Job Role of the Electrical Engineer: \n A fantastic opportunity which is not to be missed by strong Electrical Engineer has come to the forefront. You will be responsible for carrying out electrical maintenance, fault-finding, and planned preventative maintenance on a range of fully automated production machinery, ensuring maximum uptime and efficiency. \n Sector – Factory Maintenance \n Non-Negotiable Requirements of the Electrical Engineer: \n\n • Level 3 Electrical qualification\n, • 17th or 18th Edition\n\n Requirements for the Electrical Engineer: \n\n • Knowledge of fault finding on PLC's\n, • Open to backgrounds\n, • Installation and commissioning experience\n\n The Electrical Engineer will benefit from: \n\n • Working a days role with sociable hours and a 1pm finish on a Friday!\n, • Plenty of overtime paid at premium rates (1.5 and double)\n, • Company pension\n, • 25 days holiday plus Bank Hols\n\n If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. \n For further details contact Helen Brown at Pioneer Selection on \n As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. \n You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details. \n

Quality Engineer \n Location: Rochdale Salary: £43,000 - £47,000 per annum (depending on experience) \n Permanent \n Our client, a successful multi-site manufacturing business, is looking to recruit an experienced Quality Engineer to join their Quality Assurance team in Rochdale. \n This is an excellent opportunity for a proactive quality professional with experience in automotive or high-volume manufacturing to support customer quality, drive continuous improvement and play a key role in New Product Introduction (NPI). \n Quality Engineer Key Responsibilities \n\n • Support and improve product and process quality across manufacturing operations.\n, • Lead customer quality investigations, implementing effective corrective and preventative actions.\n, • Support New Product Introduction (NPI), ensuring quality requirements are achieved throughout product launch.\n, • Work closely with Manufacturing, Engineering, Customers and Suppliers to drive quality improvements.\n, • Analyse quality data and customer scorecards, identifying trends and reporting KPIs.\n, • Conduct internal and external quality audits in line with ISO standards.\n, • Support supplier quality activities and promote a culture of continuous improvement.\n, • Ensure compliance with customer requirements and company quality standards.\n\n About You – The Quality Engineer \n You will have previous experience in a Quality Engineer role within automotive or high-volume manufacturing and be confident working with customers, suppliers and cross-functional teams. \n Quality Engineer Essential: \n\n • Engineering qualification (or equivalent industry experience).\n, • Internal Auditor qualification for ISO 9001 (ISO 14001 desirable).\n, • Experience with IATF 16949 Core Tools (APQP, PPAP, FMEA, SPC and MSA).\n, • Background within a Tier 1 automotive or blue-chip manufacturing environment.\n, • Strong problem-solving, root cause analysis and data analysis skills.\n, • Proficient with Microsoft Office, ERP systems and customer quality portals.\n\n Quality Engineer Desirable: \n\n • Experience within plastics, injection moulding, paint finishing or assembly manufacturing.\n, • Lean Manufacturing and Continuous Improvement knowledge.\n\n Additional Quality Engineer Requirements \n\n • Full UK driving licence.\n, • Valid passport and willingness to travel.\n, • Right to work in the UK.\n\n If you're looking to join a growing manufacturing business where you can make a real impact on quality performance and continuous improvement, we'd love to hear from you. \n Apply online today for this Quality Engineer role and a member of the team at Bamford Contract Services will be in touch. \n To view more jobs from Bamford Contract Services, Find us on Facebook bamfordcs or follow us on Twitter bamfordcs.

Data Architect \n Location: Hybrid (UK)Salary: £80,000 \n We're partnering with a highly successful, private equity-backed organisation that is embarking on a major data transformation journey. \n The business has recognised data as a strategic asset and has recently invested in leadership and technology to create a modern, enterprise-wide data capability. As part of this greenfield transformation, they're looking for an experienced Data Architect to take ownership of the organisation's data platform strategy and design. \n This is a role offering autonomy, visibility with senior stakeholders and the chance to make a lasting impact across the entire business. \n As the Data Architect, you will be responsible for designing and governing the enterprise data platform, creating a scalable and secure foundation for reporting, analytics, AI, and future innovation. \n Working closely with executive stakeholders and technology leadership, you'll define the architectural vision while driving the implementation of a modern Lakehouse and Data Warehouse environment built on Microsoft and Databricks technologies. \n Responsibilities: \n\n • Designing enterprise-scale data warehouse and Lakehouse architectures\n, • Developing data platform strategies using Microsoft Fabric OneLake and Databricks\n, • Building scalable data models and storage frameworks\n, • Establishing robust governance, security, lineage and access control frameworks\n, • Creating modern data integration and transformation pipelines\n, • Defining CI/CD and deployment standards for data products\n, • Driving the adoption of best practices across architecture, performance and scalability\n, • Collaborating with senior business stakeholders to translate strategic objectives into technical solutions\n\n Requirements: \n\n • Enterprise data warehouse architecture and design\n, • Microsoft Fabric, Azure Data Platform technologies and modern Lakehouse architectures\n, • Databricks, Unity Catalog and Delta Lake\n, • PySpark, Databricks, SQL\n, • Medallion Architecture implementation\n, • Data modelling approaches including Star Schema and Data Vault\n, • Data governance, security and access management\n\n Why This Opportunity \n\n • Greenfield data transformation programme\n, • Full ownership of enterprise data architecture\n, • Significant investment in modern Microsoft technologies\n, • Opportunity to shape the organisation's move into Microsoft Fabric\n, • Strong board-level sponsorship and commitment to data-driven decision making\n, • Direct influence on strategic business outcomes\n, • People-first culture with a genuine commitment to employee development\n, • Funded Microsoft certifications and professional accreditations\n, • Long-term career growth within a forward-thinking organisation\n\n \n What's on Offer? \n\n • Competitive salary and benefits package\n, • Hybrid working model\n, • High-profile role with executive-level exposure\n, • Significant autonomy and ownership\n, • Investment in training, certifications and professional development\n, • Opportunity to influence technology decisions and strategy\n, • Collaborative, people-focused culture that genuinely invests in its employees\n\n

Electrical Maintenance Engineer (Contract) \n Location: Manchester \n Rate: £40.00 per hour - Outside IR35 \n Shift Pattern: 3 Shift Rotation (Mornings, Afternoons & Nights) Gap Technical is recruiting on behalf of a leading manufacturing business for an experienced Electrical Maintenance Engineer to join their engineering team on a contract basis in Manchester. \n This is an excellent opportunity for a hands-on... \n \n \n ZIPC1_UKTJ

Mobile Site Supervisor \n\n • Location: Heywood & Prestwich\n, • Job Type: Full-time (Monday- Friday Days) 1 in 6 weeks on call out\n\n We are seeking a Maintenance Technician to provide proactive and reactive building maintenance services. This role is crucial in ensuring that our healthcare properties are maintained to the highest standards, ensuring safety and compliance while supporting the client's core activities. \n Day-to-day of the role: \n\n • Liaise closely with the Help Desk to ensure all reporting systems are implemented and kept up to date.\n, • Act as the Health and Safety Representative, conducting routine health and safety checks and ensuring compliance with all relevant legislation.\n, • Contribute to the development of the premises ethos and culture as part of the site operational team.\n, • Provide a safe and compliant building and facilities to support the client’s core activities.\n, • Cover sites within the portfolio for colleague absence or annual leave as delegated by the Senior Site Supervisor or Facilities Manager.\n, • Induct and supervise external contractors or visitors on site.\n, • Oversee works by appointed third parties and be the main point of contact on site.\n, • Issue relevant permits to work and complete supply chain appraisals, providing feedback as necessary.\n, • Carry out statutory and preventative maintenance checks on plant and equipment.\n, • Maintain the site maintenance logbook/CAFM system and action tasks as appropriate.\n, • Ensure all public access areas including car parks are unobstructed and free from litter and major debris.\n\n Required Skills & Qualifications: \n\n • Organised thinker with basic DIY skills.\n, • Excellent communication skills and the ability to listen.\n, • Good timekeeping and prioritisation abilities.\n, • Valid Driving Licence.\n, • Skills in conflict management and first aid.\n, • Awareness of Legionella and Fire Safety.\n, • DBS check will be applicable.\n, • Proactive and a strong team player, approachable and responsive in client-facing roles.\n\n Benefits: \n\n • Competitive salary and benefits package.\n, • Opportunities for professional development and training.\n, • Supportive team environment.\n, • Dynamic work across multiple sites, providing variety and challenge.\n\n To apply for the Mobile Site Supervisor position, please apply below

An exciting opportunity has arisen for an Industrial Engineer, based in the Oldham, Manchester area. You will be joining this world leading high technology engineering company.They are seeking an Industrial Engineer based in Oldham, Manchester to provide who will lead the design, development and improvement of effective systems and processes within Manufacturing.The ideal candidate for the Industrial Engineer based in Oldham, Manchester will have a strong understanding of continuous improvement processes, optimising complex processes and driving cost-efficiency through waste reduction activities.The successful Industrial Engineer based in Oldham, Manchester will have a background in;Lean manufacturing / 6 Sigma Green process improvements methodologiesMES Industry 4.0Cycle time reductionApply Now! For more information on the Industrial Engineer job based in the Manchester area, please send your CV to or contact Tom Drew on 01582 878848 quoting reference THD1378. Otherwise, we always welcome the opportunity to discuss other Engineering jobs on 01582 878848.TPBN1_UKTJ

Electrical Engineer \n Oldham \n Up To £41,000 + Benefits \n Days \n We are looking for a motivated Electrical Engineer to join a growing engineering team based in Oldham. Reporting directly to the Engineering Manager, you will play a key role in the design, installation, commissioning, and ongoing support of electrical control systems across a variety of industrial applications. \n This is an excellent opportunity for an engineer with strong electrical knowledge and hands-on experience in PLC programming, commissioning, and installation. The company is committed to investing in its people through ongoing training and development, providing opportunities to enhance your technical skills while working on a diverse range of projects. \n The role will suit an ambitious Electrical Engineer looking for a technically challenging position within a stable and forward-thinking organisation. \n Role Description \n\n • PLC programming, modification, and fault-finding on a range of control systems\n, • Electrical installation and commissioning of industrial machinery and automated equipment\n, • Testing and validation of electrical control panels and systems\n, • Diagnosing and resolving electrical faults both on-site and remotely\n, • Supporting project delivery from design through to commissioning\n, • Producing and updating technical documentation where required\n, • Working closely with customers and internal teams to ensure successful project completion\n, • Reporting directly to the Engineering Manager\n, • Occasional travel to customer sites for commissioning and support activities\n\n Skills & Qualifications \n\n • Previous experience as an Electrical Engineer, Controls Engineer, or Automation Engineer\n, • Strong PLC programming experience (Siemens, Allen Bradley, Mitsubishi, or similar)\n, • Proven commissioning and electrical installation experience\n, • Ability to read and interpret electrical schematics and technical drawings\n, • Electrical Engineering qualification (Apprenticeship, NVQ, HNC/HND, or equivalent)\n, • Experience with industrial control panels and automation systems\n, • Strong electrical fault-finding and problem-solving skills\n, • Excellent communication skills and a customer-focused approach\n, • Full UK Driving Licence desirable\n\n This is a fantastic opportunity to join a well-established company offering varied project work, technical development, and long-term career progression within the industrial automation and controls sector.

The Maintenance Engineer is responsible for carrying out planned compliance inspections and functional safety checks across multiple sites to ensure fire safety systems and life safety equipment are operating correctly and remain compliant with current legislation and company standards. \n The role focuses on proactively identifying defects, faults, or non-compliance relating to fire detection systems... \n \n ZIPC1_UKTJ

Job Description: Stores / Sales Assistant (Engineering & Industrial)\n Job Title: Stores / Sales Assistant \n Department: Stores / Sales \n Reports To: Stores Manager / Office Manager \n Salary Range: £25,000 - £35,000 per annum - dependent on experience Job Purpose\n We are seeking a technically minded and customer-focused Stores / Sales Assistant to join our busy engineering and industrial supply operation. This i... \n \n ZIPC1_UKTJ

Are you a Technical or Scientific Service Engineer looking to concentrate your work within Manchester? Are you looking to do local site-based customer-facing work, while keeping an element of variety? Due to our rapid expansion, an opportunity has arisen for a Technical Service Engineer / Scientific Support Engineer, to manage our state-of-the-art robotics solutions within the pharmaceutical and biotechnology markets. BASIC SALARY: £52,000 - £56,000 BENEFITS:· Monthly £150 On-Call Allowance + £120 for additional call out · Company Pension Scheme (minimum employee contribution of 4%, Company will pay 5% and match up to 8%) · Performance Bonus · 25 Days Annual Holiday (Plus Statutory Days) · Group Income Protection Scheme · Private Health care including Optical & Dental · Life Assurance etc. LOCATION: Manchester COMMUTABLE LOCATIONS: Stockport, Salford, Sale, Bury, Oldham, Altrincham, Wilmslow, Rochdale, Bolton, Stalybridge, Cheadle, Warrington, Glossop, Stretford, Northwich. JOB DESCRIPTION: Field Service Engineer, Technical Service Engineer, Technical Support Engineer, Scientific Service Engineer - robotics, automation, pharmaceutical, life sciences, medical, biotechnology You will be our main Field Service Engineer for the Manchester area. Travel outside of this area will also be required from time to time, occasionally spending time away. We will train you extensively from Day 1, on our products, systems, IT, procedures, applications, and customers. This is an on-site role, immersing yourself with key customers, their visions, needs and aspirations. KEY RESPONSIBILITIES: Field Service Engineer, Technical Service Engineer, Technical Support Engineer, Scientific Service Engineer - robotics, automation, pharmaceutical, life sciences, medical, biotechnology As our Technical Service Engineer, you will: · Become the service subject Matter Expert for our customers. · Perform remote support and diagnostics. · Manage the escalation flow to ensure timely customer follow-up until issue is resolved. · Ensure Preventative Maintenance Procedures, intervals, and schedules are correct and complete. · Identify / forecast spare parts requirements · Utilise D365 Service Reports, RMAs & monthly KPI reports. · Handle all service calls timely and professionally. · Communicate with customer, R&D, Customer Service, Product Management, Manufacturing and Sales, ensuring superior customer satisfaction. · Provide 24/7 remote and on-site service on a rotating model. PERSON SPECIFICATION: Field Service Engineer, Technical Service Engineer, Technical Support Engineer, Scientific Service Engineer - robotics, automation, pharmaceutical, life sciences, medical, biotechnology You will have: · Technical background (electrical, mechanical, IT), within complex machinery, in an industry such as: Heavy Engineering, Life Sciences, Medical Equipment, Mining, Automation, Robotics, Shipbuilding, Marine, Drilling, Biotechnology (or similar). · Either a technical Degree, HNC, HND, or time-served professional experience equivalent. · Strong customer-centric / customer-facing pedigree. · Creative problem-solving mindset, driven by the motivation to assist customers, sales & service personnel, to overcome obstacles and challenges. · Experience of Microsoft 365 or equivalent, Active directory, and SQL databases (we provide relevant training). · Experience of IP addressing, Remote Desktop Protocols, & Driver Support. · Knowledge of Beckhoff Twin CAT, Elmo Studio, Vision Systems, and Barcode Reading. · Capability of working reliably / resiliently. NB : This job requires exerting up to 50 pounds of force occasionally and / or negligible amount of force frequently or constantly to lift, carry, push, pull, or otherwise move objects. OUR COMPANY: We are the fastest-growing division of a multinational branded R&D manufacturing Group. Our division has over 80 staff, across 12 countries. For the past 75 years we have innovatively developed, pioneered, built and created customer-led product solutions within the fields of Life Sciences, Medical Devices, Robotics, and Automation. We are culturally diverse, with a cooperative, down-to-earth environment. Not only do we offer a motivating working style, but also modern working conditions backed by a commitment to training and personal advancement. PROSPECTS: This position offers unrivalled training and development. This is an area where we deliver many resources, aiming to keep your skills fresh, and at the leading edge. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Technical Service Engineer, Technical Support Engineer - Robotics, Automation, Pharmaceutical, Life Sciences, Medical, Biotechnology, Medical Devices, Mining, Heavy Engineering, Scientific Instruments INTERESTED? Please click apply. You will receive an acknowledgment of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18616, Wallace Hind Selection

Job Title: Intermediate Electrical Design Engineer - Building ServicesLocation: RochdaleFull-timeSalary: £35,000 - £45,000Company InformationAre you an Intermediate Electrical Design Engineer who is looking to work on technically challenging, high-value and rewarding projects in a specialist sector like the pharmaceutical sector?This is an opportunity to join a well-established Building Services Contractor with over 25 years of experience delivering bespoke M&E solutions on projects up to £100m. Known for their quality-first approach and in-house expertise, they offer a true end-to-end service - from concept design through to installation and long-term maintenance.The RoleYou'll be assisting senior engineers with electrical design and delivery of complex building services projects. Working alongside a highly skilled engineering team, you'll have a great opportunity to gain a great level of exposure and direction from experienced professionals. This role is ideal for an engineer who has a year or two under their belt and is looking for quality training.Key ResponsibilitiesDesign and specification of electrical building services systemsProduce detailed calculations and design using industry software such as Amtech, Electrical OM, Relux, and Revit, but happy to train on any software for the right candidatePrepare design drawings, technical specifications, and tender documentationAttend design team meetings, site visits, and inspections as requiredEnsure designs comply with current legislation, standards, and best practiceKey RequirementsDegree in Electrical Engineering or Building Services Engineering (or equivalent)Minimum 2+ years of experience in electrical building services designWorking experience with design softwareKnowledge of relevant regulations, standards, and codes of practiceWorking towards membership of a relevant professional body (e.g., CIBSE) desirableFull UK driving licence preferredWhat's On OfferCompetitive salary of £35,000 - £45,000Opportunities for career progression and professional developmentHyrbird workingSupport with chartership and ongoing trainingCollaborative and supportive working environmentInvolvement in high-profile and technically complex projects5% pension, private healthcare, and flexible working hoursWhat you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now on 0161 236 4949Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.ukTPBN1_UKTJ

CAD Technician (Sheet Metal/SolidWorks) \n Rochdale \n £40,000 - £50,000 + Training + Company Benefits + Pension \n Are you a CAD Technician or similar, with prior experience in SolidWorks and working with sheet metals, looking to join a well-established company who are managing high volumes of new work for high end companies such as Matalan, New Look, and Tesco? \n Do you want to be a part of an expanding business looking to grow it's team with an experienced CAD Technician to help take on an increased workload as the company continues to grow, whilst also benefiting from long-term career development and a chance to increase your skills? \n On offer is the chance for a CAD Technician or similar to become part of a well established supplier to blue chip to blue chip clients such as Tesco and New Look. Founded over 30 years ago, this company has shown stability and maintained their workload and partnerships, with a steady future to come. \n In this role the successful CAD Technician or similar will be responsible for using SolidWorks to create drawings for sheet metal fabrication, programming CNC machinery, and issuing drawings to major clients such as Tesco and Matalan. The successful CAD Technician or similar will be working 8:00am-5:00pm from Monday to Thursday and will get to have an early finish on Friday, leaving at 1pm. \n The ideal CAD Technician or similar will have experience working with sheet metal, and a background in fabrication. Experience in solid works is preferable, however this is not essential. \n The Person \n\n • Experience working with Sheet Metal\n, • Background in CAD\n, • SolidWorks Knowledge\n\n The Role \n\n • Creating Sheet Metal Fabrication Drawings\n, • Sending Drawings out to Clients\n, • Designing and Programming\n\n Reference: BBBH25893AF1 \n Keywords: CAD Technician, SolidWorks, Sheet Metal, Sheet Metal Fabrication, Fabrication Drawings, Technical Drawings, Engineering Drawings, CAD Design, 3D Modelling, Design Engineering, Machine Programming, Rochdale, Oldham \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Mechanical Design Engineer \n North Manchester (Commutable from Bury, Oldham, Rochdale, Heywood, Bolton and surrounding areas) \n £40,000 to £45,000 + Annual Bonus + Flexible Hours + Early Finish Fridays + Health Cash Plan + Excellent Company Benefits \n Are you a Mechanical Design Engineer with strong, recent SolidWorks experience, looking for a technically varied position where you can work on bespoke products from initial concept through to manufacture? \n This is a fantastic opportunity to join a growing manufacturer where you will become a key member of an experienced design team, taking ownership of technically interesting projects while continuing to develop your skills within a supportive working environment. \n This well established company has over 30 years of success designing and manufacturing innovative bespoke products. Due to continued growth, they are now looking to strengthen their mechanical design team with an experienced engineer who can hit the ground running. \n In this role you will use SolidWorks to develop bespoke products against customer focused design briefs, producing detailed 3D models, assemblies, Bills of Materials and manufacturing drawings. You will work closely with production and other departments to ensure designs are practical, accurate and ready for manufacture. \n This role would suit a Mechanical Design Engineer with strong commercial SolidWorks experience and a background in manufacturing, looking for varied bespoke projects, further technical development and excellent long term prospects. \n The Role: \n • Designing bespoke products from concept through to manufacture Producing detailed 3D SolidWorks models, assemblies and manufacturing drawings Working with multiple part assemblies and Bills of Materials Working closely with production and wider project teams Flexible working hours with an early finish every Friday \n The Person: \n • Strong, recent commercial SolidWorks experience Mechanical design and manufacturing experience Experience with 3D modelling, assemblies and manufacturing drawings * Looking for a long term permanent opportunity \n Reference Number: BBBH276272 \n To apply for this role or to be considered for further roles, please click "Apply Now" or contact Matilda Hocknell at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

\n Shift Pattern: 4 on / 4 off Days & Nights \n An exciting opportunity has arisen for a Multi-Skilled Maintenance Engineer to join a leading, high-volume manufacturing business operating within a fast-paced production environment. This role is ideal for an experienced engineer who enjoys both reactive fault finding and proactive maintenance activities while contributing to continuous improvement initiatives. \n \n Key Responsibilities\n As a Multi-Skilled Maintenance Engineer, your duties will include: \n\n • Carrying out planned preventative maintenance (PPM) and reliability-based maintenance activities.\n, • Responding to equipment breakdowns and undertaking effective fault finding to minimise downtime.\n, • Diagnosing and repairing electrical, mechanical, pneumatic, and hydraulic faults.\n, • Supporting continuous improvement and lean manufacturing projects focused on increasing reliability and efficiency.\n, • Working in accordance with Permit to Work systems, safe isolation procedures, and site health and safety policies.\n, • Updating maintenance records and managing work orders through the CMMS system.\n, • Ordering and managing spare parts requirements.\n, • Assisting with installation, commissioning, and improvement of new and existing machinery.\n, • Producing and updating technical documentation, SOPs, and risk assessments.\n, • Supporting autonomous maintenance and TPM activities across the site.\n, • Collaborating closely with production, quality, and health & safety teams to maximise operational performance.\n, • Supporting and mentoring colleagues where required.\n, • Working alongside external contractors during maintenance and project activities.\nCandidate Requirements\n To be successful in this position, you will ideally have: Essential\n\n • Minimum 3 years' experience in a maintenance engineering role within a manufacturing environment.\n, • Completed apprenticeship, ONC/HNC, NVQ Level 3, or equivalent qualification in Electrical or Mechanical Engineering.\n, • Strong fault-finding experience across automated production machinery.\n, • Knowledge of electrical, mechanical, pneumatic, and hydraulic systems.\n, • Ability to read and interpret engineering drawings and schematics.\n, • Experience working within a fast-paced production environment.\n, • Strong communication and teamworking skills.\n, • Good computer literacy and experience using maintenance management systems.\nDesirable\n\n, • FMCG, food, beverage, packaging, chemical, pharmaceutical, or other high-speed manufacturing experience.\n, • Basic PLC fault-finding knowledge.\n, • Experience with Continuous Improvement, Lean Manufacturing, or TPM methodologies.\nWhat We're Looking For\n We're seeking an engineer who is: \n\n • Proactive and solutions-focused.\n, • Comfortable working independently and as part of a team.\n, • Committed to high health and safety standards.\n, • Adaptable and capable of working within a fast-paced environment.\n, • Driven to continuously improve equipment performance and reliability.\n, • Motivated to develop their technical skills and support others.\nPerformance Measures\n Success in this role will be measured against: \n\n • Reduction in equipment downtime.\n, • Improvement in OEE performance.\n, • PPM compliance.\n, • Delivery of continuous improvement initiatives.\n, • Health & safety compliance.\n, • Corrective action completion.\n, • Maintenance planning and execution standards.\n, • Contribution to operational efficiency improvements.\nWhat's on Offer\n\n, • Competitive salary: £53,000 and excellent benefits package.\n, • Stable and secure manufacturing environment.\n, • Opportunity to join a market-leading organisation.\n, • Ongoing training and development.\n, • Career progression opportunities.\n, • Challenging and varied engineering role with exposure to modern manufacturing equipment.\n\n \n \n Robert Walters Operations Limited is an employment business and employment agency and welcomes applications from all candidates

Discover your exciting roleThe Senior Engineering Manager is a strategic and hands-on technical leader, responsible for advancing Hargreaves’ position as the UK’s leading authority on safety-critical HVAC. With a mechanical bias, you will lead engineering excellence and technical delivery in nuclear energy, defence, transport, and bio-life sciences, ensuring Hargreaves’ legacy and future growth. You will collaborate with internal teams and external stakeholders, representing Hargreaves at industry events and forums, supporting the business’ reputation, and driving best practice in technical delivery, standardisation, lean engineering, and digital innovation.Explore your tasks and responsibilitiesTechnical Leadership & GovernanceSet and implement technical strategy in alignment with business objectives and sector strategy.Drive standardisation and harmonisation of engineering processes, specifications, and designs across projects and teams.Lead the adoption of lean methodologies to improve efficiency, eliminate waste, and optimise value delivery.Ensure technical excellence and compliance with relevant codes, standards, and legislation, particularly within safety- critical environments (nuclear, defence, transport, bio-life sciences).Champion the use of digital engineering tools (BIM, DfMA, digital design assurance, 4D sequencing, offsite QA workflows) to accelerate project delivery, enhance assurance, and enable continuous improvement.Project & Engineering DeliveryOversee engineering delivery from concept through to manufacture, installation, and commissioning. Ensure projects are delivered safely, on time, to budget, and to quality standards.Own technical governance, risk management, and lessons learned for ongoing improvement.Stakeholder Management & CollaborationAct as a technical ambassador for Hargreaves at industry events and client forums.Foster collaboration across the business, including manufacturing, design, and project delivery teams. Build and maintain strong relationships with clients, suppliers, and industry partners.People Leadership & DevelopmentLead and develop engineering teams, supporting a high-performance and safety-first culture.Mentor, coach, and grow technical capability in line with future business needs.Drive resource planning, succession, and skills development, including apprenticeships and professional training.Commercial & Strategic ContributionSupport business development through technical input into bids, tenders, and client engagement.Identify and respond to new market opportunities, especially in nuclear energy, defence, and emerging sectors. Contribute to achieving business KPIs: financial, customer satisfaction, project execution, and resource utilisation.Show your expertiseEssentialDegree-qualified in Mechanical Engineering or Building Services (or equivalent).Extensive experience leading multidisciplinary engineering teams in mechanical/HVAC sectors, preferably in safety- critical environments (nuclear, defence, etc.).Strong track record of delivering complex engineering projects from concept through to commissioning.Deep knowledge of UK and European standards, relevant legislation, and best practice in HVAC and specialist ventilation.Experience driving standardisation, lean techniques, and process improvement in engineering environments.Demonstrated expertise in the implementation and use of digital tools (BIM, digital QA/QC, offsite QA, DfMA, design automation) to accelerate design delivery and assurance.Experience collaborating across manufacturing, design, and project delivery functions.Willingness and ability to travel and represent Hargreaves at industry forums and events. Strong communication, leadership, and stakeholder management skills.DesirableChartered Engineer status or actively working towards it.Experience within highly regulated industries (Nuclear, Defence, Pharmaceuticals).Experience with advanced manufacturing, modular/offsite (OSM) solutions, and digital transformation. Experience with innovation/R&D in product and process development.Key Stakeholders and InteractionsWorks closely with: Project Managers, Design Teams, Manufacturing Managers, Business DevelopmentManages: Engineering Teams (including Design, Manufacturing Engineering, and Project Engineering staff)External stakeholders: Clients, Supply Chain Partners, Industry Bodies, Regulatory AuthoritiesInternal teams: Manufacturing, Design, Project Delivery, Business Development, SHEQ, HRContact:Exentec Hargreaves is a pioneering UK leader in construction engineering of HVAC and specialist ventilation systems for safety critical facilities. Exentec Hargreaves is proud to be associated with some of the UK’s most prestigious infrastructure projects. For more than 150 years, Exentec Hargreaves has proved our value as the largest and most unique construction engineering business specialising in HVAC in the Energy & Decommissioning, Defence and Transport sectors. With a legacy of technical excellence, we are re-establishing our leadership as the HVAC authority, delivering value and innovation across nuclear energy, defence, transport, advanced technology and bio-life science sectors.Exentec Hargreaves is an Equal Opportunities Employer. We are committed to equal employment opportunities regardless of age, sexual orientation, gender, religion, race, ethnic origin, disability, marital status or parental status. We base all our employment decisions on merit, job requirements and business needs.Job SummaryJob number: 23230Date posted : 2026-07-27Profession: EngineeringEmployment type: Full time

\n Due to continued growth and expansion, Q Crane & Plant Hire Limited is looking for a highly motivated and experienced Crane Engineer to join our team. \n The role will be primarily workshop-based at our Oldham depot, carrying out inspections, servicing, fault diagnosis and repairs across our fleet of lattice boom and telescopic crawler cranes. The successful candidate will also be required to attend customer sites and project locations throughout the UK when necessary. \n This is a varied, hands-on role within a forward-thinking, family-run business and will involve supporting the safe maintenance, mobilisation and operation of our crane fleet. \n \n Key Responsibilities \n \n\n • Diagnose mechanical, electrical, hydraulic and pneumatic faults on crawler cranes and associated equipment.\n, • Carry out effective repairs and component replacement in accordance with manufacturer guidance and company procedures.\n, • Complete planned preventative maintenance, routine servicing and safety inspections.\n, • Attend crane breakdowns at customer sites throughout the UK.\n, • Assist with the rigging and de-rigging of lattice boom and telescopic crawler cranes.\n, • Prepare cranes for mobilisation and inspect equipment following its return from hire.\n, • Carry out pre-hire and post-hire inspections, identifying defects and completing the required documentation.\n, • Deliver operator familiarisation and equipment handovers when required.\n, • Maintain accurate service, inspection and repair records.\n, • Ensure tools, parts and workshop areas are maintained in a safe, clean and organised condition.\n, • Work closely with crane operators, rigging teams, hire controllers and the wider engineering department.\n, • Follow all company health, safety, environmental and quality procedures.\n\n \n Skills and Experience \n The ideal candidate will: \n\n • Have experience working as a crane engineer, plant engineer, heavy vehicle engineer or in a similar mechanical engineering role.\n, • Have a strong understanding of mechanical, electrical, hydraulic and pneumatic systems.\n, • Be confident in diagnosing faults using technical manuals, electrical schematics and diagnostic equipment.\n, • Have experience working on crawler cranes, lifting equipment, heavy plant or similar machinery.\n, • Be capable of working independently and as part of a team.\n, • Have a practical, methodical and safety-conscious approach to their work.\n, • Be willing to travel and work at locations across the UK.\n, • Be flexible regarding working hours when responding to breakdowns or operational requirements.\n, • Hold a full UK driving license.\n\n Manufacturer-specific experience with Liebherr, Kobelco, Hitachi Sumitomo cranes would be advantageous, although additional training can be provided. \n \n Personal Attributes \n \n We are looking for someone who: \n\n • Has a positive, can-do attitude.\n, • Takes pride in completing work to a high standard.\n, • Is dependable, motivated and willing to learn.\n, • Communicates effectively with colleagues, operators and customers.\n, • Understands the importance of health and safety within lifting operations.\n, • Remains calm and professional when responding to operational faults and breakdowns.\n, • Would like to develop a long-term career within a growing, family-run company.\n\n \n What We Offer \n \n\n • A varied role working on a modern and diverse crawler crane fleet.\n, • Ongoing technical and manufacturer-specific training.\n, • Opportunities for professional development and progression.\n, • Workshop and nationwide site-based experience.\n, • A supportive working environment within an established family-run business.\n, • Competitive salary and employment package, dependent upon experience.\n\n

Multi Skilled Maintenance Engineer (FMCG) \n \n Due to ongoing growth and investment my client, a successful food manufacturer based in the Oldham area are seeking a Multi Skilled Maintenance Engineer to join their busy engineering team. \n Reporting to the Engineering Manager and Supervisor you will be responsible for responding to breakdowns/ reactive, and ongoing preventative maintenance of all machinery on site. \n In addition, you will be involved continuous improvement projects. \n \n Daily Tasks and Responsibilities \n\n • Installation of machinery and project work Fault find electrical equipment and machinery\n, • Adhere to health and safety and food safety procedures\n, • Maintain documentation, log all breakdowns and servicing work carried out\n, • Support all production, work as a team, liaise with all departments\n, • Actively take part in CI projects\n, • Maintain robust PPM Systems\n, • Take part in machinery installations, training to develop skills\n\n \n Skills and Experience \n\n • Formal engineering qualification (Min Level 3)\n, • Understanding and working knowledge of pneumatic/ hydraulic systems\n, • Electrical engineering bias\n, • 17th edition, ideally 18th edition\n, • Must have experience working within a fast paced manufacturing environment\n\n \n The Role \n\n • Panama Shift = every other weekend off work\n, • Mix of days and nights 7am-7pm, 7pm-7am\n, • Salary £52K+\n, • Lots of training and development within the role\n, • Other benefits such as company pension\n\n \n Mach is acting as a recruitment agency for this vacancy

About the opportunity \n At Contained Air Solutions, we design and manufacture specialist clean air and containment solutions for customers across a range of demanding industries. As our business continues to grow, we are looking for a Project Manager / Design Engineer to join our team and play an important role in delivering customer projects from initial concept through to completion. \n \n This is an exciting opportunity for someone with a technical and engineering background who is looking to take the next step in their career. The role offers full training and support to build on your existing technical skills while developing the skills and experience needed for a project management role. \n \n You will work closely with colleagues across Contracts, Design, Production, Purchasing, Quality, Service and Installation, helping to ensure projects are technically correct, properly planned, commercially controlled and delivered in line with agreed requirements. \n \n Key responsibilities \n Project management and coordination \n\n • Support assigned projects from internal handover to final completion, working to agreed scope, programme, quality and cost requirements\n, • Review customer orders, specifications, quotations, drawings and contractual requirements, escalating omissions, conflicts or risks promptly\n, • Prepare and maintain project plans, action lists, design schedules, risk and issue logs, and progress reports\n, • Coordinate information and actions across Design, Production, Purchasing, Quality, Testing, Service and Installation\n, • Arrange and contribute to internal and customer project meetings, issue clear notes and follow up agreed actions\n, • Monitor milestones, long-lead items, design approvals, manufacturing progress, testing, delivery and installation dates\n, • Identify potential delays, cost increases, technical problems and changes to scope, and raise them with the responsible manager before they affect delivery\n, • Support the management of variations by recording the reason, technical impact, programme impact and associated cost for approval\n, • Maintain accurate project records, correspondence, approvals and close-out documentation within the company systems\n, • Build professional working relationships with customers and suppliers, providing accurate updates within the limits of delegated authority\n, • Producing and maintaining weekly project reports alongside the Design Engineer, ensuring reports are accurate, completed on time, and ready for issue to customers and Production.\n\n \n Design engineering \n\n • Produce and revise 2D and 3D designs, general arrangement drawings, component drawings, assemblies and supporting manufacturing information\n, • Translate customer and project requirements into practical, safe and manufacturable designs, with guidance from experienced engineers where required\n, • Prepare and maintain bills of materials, drawing registers, technical files and controlled design records\n, • Check dimensions, interfaces, materials, tolerances and component selections before drawings are released for manufacture\n, • Apply relevant company standards, design procedures, customer specifications and applicable regulatory or industry requirements\n, • Participate in design reviews, risk assessments, design verification and problem-solving activities\n, • Liaise with Production and suppliers to resolve manufacturing queries and improve ease of manufacture, assembly, testing, maintenance and installation\n, • Support testing and factory acceptance activities, including the investigation and correction of technical issues\n, • Incorporate approved changes accurately and ensure final as-built information reflects the product supplied\n, • Contribute to standardisation, continuous improvement, lessons learned and the development of reusable design solutions.\n\n \n General responsibilities \n\n • Work in accordance with company health and safety, quality, environmental and information-security procedures\n, • Take ownership of agreed actions and communicate early when support or a decision is required\n, • Manage workload and priorities effectively while maintaining accuracy and attention to detail\n, • Undertake relevant training and work towards agreed professional and technical development objectives\n, • Carry out other reasonable duties consistent with the level and purpose of the role.\n\n \n Person specification \n Essential \n\n • Degree, HND or equivalent qualification in mechanical engineering, product design, manufacturing engineering or a closely related discipline\n, • Working knowledge of 2D and 3D CAD/Solidworks gained through education, placement, employment or substantial project work\n, • Ability to interpret technical drawings and apply basic engineering principles to practical design problems\n, • Able to plan work, maintain accurate records, manage actions and work to deadlines\n, • Clear written and verbal communication, with confidence working across departments and with customers as experience develops\n, • Analytical, methodical and willing to ask questions, accept feedback and take responsibility for learning\n, • Competent with Microsoft Office applications; able to learn ERP, document-control and project-planning systems\n\n \n Desirable \n\n • Industrial placement, internship or project experience in a manufacturing, engineering or project environment\n, • Awareness of design for manufacture, bills of materials, change control, risk management or quality systems\n, • Full UK driving licence and willingness to make occasional customer or site visits\n, • Experience with Microsoft Project.\n\n \n Key behaviours \n\n • Accuracy – checks work carefully and understands the consequences of errors\n, • Ownership – follows actions through and does not allow problems to remain unreported\n, • Collaboration – works constructively with technical and non-technical colleagues\n, • Commercial awareness – considers time, cost, scope and customer commitments when making decisions\n, • Practical thinking – seeks solutions that are safe, compliant, manufacturable and maintainable\n, • Learning mindset – develops technical and project-management capability through feedback and experience.\n\n \n Why join us? \n This is an opportunity to join Contained Air Solutions at an exciting stage of our continued growth, working within a specialist engineering environment where your work directly contributes to the products and projects we deliver for our customers. \n \n You will have the opportunity to develop your skills across both design engineering and project management, working alongside experienced colleagues across the business and gaining exposure to the complete journey from design through to manufacture, testing and installation. \n \n If you are technically minded, organised, and enjoy seeing projects through to completion, we would love to hear from you. \n \n Apply through LinkedIn or issue your CV to: tony.mcandrew@containedairsolutions.co.uk \n

Maintenance Engineer (Mechanical)£35,000 - £40,000 + £45K OTE + 2k Call Out Bonus + Funded Qualifications +TrainingBury St EdmundsAre you a Maintenance Engineer from a mechanical background looking to join a globally recognised business offering a wide range of refrigeration training to further boost your career within the industry?In this hands-on role, you will be working within a tight knit mechanical team on a PPM schedule, ensuring the operations on a variety of mechanical equipment are maintained. You will also be responsible for carrying out inspections on the equipment, alongside oiling and greasing.Founded over 80 years ago, this global business is one of the biggest logistic companies on the globe. With a catalogue of blue-chip clients within the food industry, they provide a range of services for controlled temperature environments. From manufacturing and servicing to exportation across the globe, they aim to be the one stop for all within the industry.This role would suit a Maintenance Engineer from a mechanical background looking for a days based role within a global business offering bespoke product training.The Role:Carrying out planned maintenance on a range of mechanical equipment including lifts and gearboxesFull training on refrigerationOn call Rota 1 in every 3 weeksMonday to Friday 8am - 4:30pmThe Person:Maintenance EngineerMechanical backgroundReference Number: BBBH26654Maintenance, Engineer, Mechanical, Fitter, Equipment, Motors, Gearboxes, Refrigeration, Controlled, Environment, Logistics, Maintain, Fault, Finding, St Bury, EdmundsIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.TPBN1_UKTJ

If you are an experienced Structural Engineer progressing toward Chartered status within the next couple of years we have an opportunity for you to join our team in the Leeds office. You will bring strong technical capability across a range of building structures and demonstrate the communication skills, initiative, and collaborative mindset needed to thrive in a high-performing team environment.Key ResponsibilitiesContribute to the design, analysis, and delivery of building structures across a variety of sectors.Undertake structural design in steel and reinforced concrete, including multi-storey frames, steel portal frames, and both new-build and refurbishment projects.Prepare clear, well-structured technical documentation, calculations, and reports.Collaborate effectively with internal colleagues, external consultants, and clients to ensure coordinated and efficient project delivery.Support the development of proportionate, safe, and buildable structural solutions.Engage proactively in project meetings, design reviews, and team discussions.Contribute to a positive, supportive, and high-performance team culture.Skills and experience you will have / possessRelevant university degree.Demonstrable experience in building structures, covering both steel and concrete design.Strong understanding of UK design codes, standards, and typical industry practice.Personal AttributesProactive, organised, and comfortable working in a fast-paced, collaborative environment.Motivated to achieve Chartered Engineer status (IStructE or ICE) within the near term.Excellent communication skills, with the ability to articulate technical issues clearly.Ability to manage small to medium projects independently with the support provided by the senior members of the team.TPBN1_UKTJ

Maintenance Engineer \n Salary: £45,000 - £50,000 \n Commutable: Manchester, Rochdale, Bury \n Shift: Double Days with Callout on late shift \n An exciting opportunity has arisen for a Maintenance Enginer to join a successful and growing industrial manufacturing/processing company. This position requires individuals who have strong Electrical skills. Applicants must hold a relevant engineering qualification, id... \n \n ZIPC1_UKTJ

Applications & Estimating Engineer £35,000 - £40,000 | Rochdale | Spring & Precision Component Manufacturing\n Monday to Thursday 8:00am to 5:00pm | Friday 7:00am to 12:00pm\n 25 Days Holiday + Bank Holidays | 4% Employer Pension Contribution\n \n \nMeridian Business Support is recruiting on behalf of a well-established manufacturing business for an Applications & Estimating Engineer to join their growing te...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

We are seeking a Automatic Door Engineer with proven experience in the maintenance and installation of automatic sliding and swinging doors. This role includes regular travel, overnight stays, and occasional out-of-hours work.Your Role as an Automatic Door Engineer:Install, Commission, maintain, and service automated door operations.Complete pre installation site surveys.Ensuring that installations are completed efficiently to a high standard.Customer liaison to ensure client satisfaction while representing the company in a professional manor.Follow company working policies and practices.Ideal Automatic Door Engineer Candidate:Experienced Industrial door engineer with knowledge/certification of EN 16005.Full Driving LicenceCSCS CardIPAF/PASMACompany InformationWho are we? Millers Vanguard are proud to have been supporting all the UKs Supermarket chains for over 40 years, in brief, we are the people in the background ensuring that supermarkets keep the Nation fed! Maintaining a wide and varied range of assets from food production equipment through to loading bay lifts.Our service are as follows:Nationwide reactive maintenanceHygienic Deep cleaning & Planned maintenance servicesRefurbishment, logistics and installation of equipmentWe do all of this with the firm foundations of being owned by the global Ali Group, whose turnover is in excess of £4 billion p.a.Our people Despite being a large operation here at Millers Vanguard we still firmly believe in running the business like we have done for the last 40 years, by valuing our biggest asset we have YOUthe employee.Our team of over 380 employees have the advantage of working in state-of-the-art working environments:New Technical response centreAward Winning research, Innovation, and recycling facilityIndustry leading Mercedes Benz fleetWe believe in providing you with the very best environment and tools to do the job.Career Development Training is also a huge part of our culture here at Millers Vanguard and our City and Guilds accredited training centre is where we coach and develop our employees regardless of your position or your length of service, we want to make sure that our staff can progress and keep pace with ever changing equipment technologies.Why Join UsTraining in our City & Guilds accredited academyJob Specific Uniform & tooling for all rolesCompany wide fun days and charity eventsCompany Pension24 days holiday allowance + bank holidaysRegular staff treats for employees and their familiesWorking Hours: 42.5 Hours + OvertimeJob Type: Full-timeBenefits:Company carCompany eventsCompany pensionFree parkingOn-site parkingTPBN1_UKTJ

My client is looking for a Commercial Gas Installation Engineer to join their growing team - a business known for doing things properly, valuing its engineers, and investing in long-term careers.This is a great opportunity to step into a role where you will take real ownership of installations, work on varied and interesting projects, and be part of a supportive, professional team.Why this role?Work on full plant room and heating installations not just servicingBe part of a well-established, growing business with a strong reputationJoin a company that values quality over rushing jobsSupportive management and a team-first cultureOngoing training and development opportunitiesCompany vehicle, specialist tools and structured support providedThe roleYou will be installing commercial and domestic heating systems, working on plant rooms, boilers, pipework and associated equipment. This is a hands-on role where your expertise will make a real difference, delivering high-quality installations across a range of sites.You will have the opportunity to work on varied projects, use your technical skills, and take pride in delivering work to a high standard.What were looking forExperience in commercial gas installationsRelevant domestic and commercial gas qualificationsA strong work ethic and pride in your workmanshipSomeone reliable, professional and safety-consciousWillingness to travelIf you are looking for more than just a job somewhere you are trusted, supported and given the opportunity to grow - this could be the move for you. The role comes with a company vehicle, specialist tools and the opportunity to take on further training and development opportunities.TPBN1_UKTJ

Quality Engineer Medical Devices | Leeds | Full Time | On-site (with occasional flexibility) | Up to £45,000 (DOE)This is a hands-on Quality Engineer role within a specialist UK medical device manufacturer, where quality, compliance, and patient safety are central to everything the business does. Youll be joining a close-knit Quality & Regulatory team within a small but growing organisation of around 40 employees, working alongside experienced quality professionals and with support from a QA/RA leadership structure. The environment is collaborative and highly involved, with strong exposure to both manufacturing operations and quality system ownership.The role sits at the heart of maintaining and continuously improving a well-established Quality Management System (QMS), with a strong focus on ISO 13485 compliance and ongoing adherence to UKCA and CE marking requirements. Youll take ownership of day-to-day quality activities including document control, non-conformance management, CAPA, and audit preparation, while also supporting both internal and external audits. Alongside this, youll contribute to continuous improvement initiatives and help strengthen quality processes across the business.This position is best suited to someone with direct medical device industry experience who is confident working within a regulated manufacturing environment. Given the size of the organisation, this is a highly visible role where youll be trusted with real ownership and the opportunity to make a tangible impact. The business is also open to considering strong mid-level candidates who are looking to further develop within a supportive medical devices environment.What will your role look like?Owning and maintaining the Quality Management System (QMS) in line with ISO 13485Ensuring quality processes, procedures and documentation remain compliant and effectiveSupporting UKCA, CE and MDR regulatory compliance activities and technical documentationLeading and supporting investigations into non-conformances, complaints and quality issuesCarrying out root cause analysis and implementing effective corrective and preventive actions (CAPA)Supporting internal and external audits, including preparation, participation and follow-up actionsMonitoring quality data and trends to identify risks and drive continuous improvementSupporting supplier approval, monitoring and ongoing quality performanceAssisting with validation activities and production quality verification where requiredWorking closely with manufacturing and cross-functional teams to ensure product quality is maintainedSupporting the QA/RA Director with departmental workload and compliance prioritiesContributing to a proactive, improvement-led quality culture across the businessAre you the right person for the job?Proven experience within the Medical Devices industry (essential)Strong working knowledge of ISO 13485 and Quality Management SystemsAround 5 years experience in a quality-related role (flexible for the right candidate)Confident working with QMS processes such as CAPA, document control, change control, deviations and NCRsExperience supporting or leading internal and external auditsExposure to MDR 2017/745 / UK MDR requirementsUnderstanding of regulatory frameworks including UK MDR, EU MDR/CE and UKCAExperience in root cause analysis and quality investigationsDegree in a scientific, engineering or related discipline (or equivalent experience)UK-based with existing right to work (sponsorship not preferred)Whats in it for you?Opportunity to work in a true Medical Devices environment with full exposure to ISO 13485 systemsSmall, collaborative team where your input directly shapes quality processes and compliance standardsHands-on role with visibility across manufacturing, quality systems, and regulatory activity23 days holiday plus bank holidaysHealthShield Classic health cash plan (post-probation) supporting dental, optical and wellbeing costsStable working environment with a strong focus on quality and continuous improvementOccasional ad hoc flexibility to work from home where appropriateWhats next? Its easy! Click APPLY now! We cant wait to hear from you!Your data will be handled in line with GDPR.TPBN1_UKTJ

Our client, a long-established and reputable business, is seeking a skilled Refrigeration & Air Conditioning Engineer to join their team. This is a fantastic opportunity to play a key role in servicing, maintaining, and installing refrigeration, air conditioning, and associated equipment.Reporting to the local Branch Manager, you will work as an integral member of an experienced engineering team, providing technical support and guidance to junior engineers and trainees.Key ResponsibilitiesPerform service work and repairs on a variety of refrigeration, air conditioning, and related equipment.Install and commission both new and used refrigeration and air conditioning systems.Conduct planned maintenance to ensure equipment runs efficiently and effectively.Provide detailed feedback to the Branch or Service Manager regarding equipment condition, enabling proactive follow-up by the sales team.Participate in the companys on-call system after a reasonable onboarding period, offering 24-hour support to customers.Mentor and support the development of junior engineers and trainees.Maintain high-quality standards in all work performed.Accurately complete administrative tasks, including job cards, maintenance reports, timesheets, and other documentation.Ensure all work is carried out safely, adhering to health and safety regulations and maintaining equipment in good condition.Share feedback to help improve the companys Health, Safety, and Environmental systems.Qualifications & ExperienceLevel 2 or Level 3 City & Guilds RACHP qualification.F-Gas Category 1 (2079) certification (preferred but not essential).Strong knowledge of workplace health and safety, particularly regarding refrigeration and HVAC industry risks.Hands-on engineering experience, with the flexibility to travel to customer sites.A customer-oriented mindset with excellent interpersonal skills, as you will often interact directly with clients.Willingness to work additional hours, if necessary, to meet customer needs.What Were Looking ForThe ideal candidate is proactive, adaptable, and committed to delivering high-quality work. Youll take pride in maintaining safe practices, mentoring junior team members, and ensuring excellent customer satisfaction.If youre an experienced engineer looking for a dynamic role with a supportive and professional team, wed love to hear from you!TPBN1_UKTJ

Eleven Eleven recruitment are seeking an experienced Setting out Engineer with own KIT & CAD experience for a civils site on the outskirts of Bury St Edmunds, Suffolk.Role: Setting out EnginnerRequirements: Own Kit, AUTOCAD Experience, CSCS Card and SOE CertsRate: £350 - £380 per dayDuration: 2-3 Months work minimumLocation: Bury St EdmundsAbout the role:- Working as a Setting out Engineer for a Groundworks firmMinimum Requirements:- Own Kit- Minimum 5 years experience- CSCS Card- AutoCad experiencePayments:- £350 - £380 per day- Based on 8.5 hours per day- Weekly payTo apply for this role please call us on 01603 515454 or apply online toTPBN1_UKTJ

Electrical Design EngineerLocation: Leeds Salary: £47,000 to £60,000 DOERole SummaryA successful and well-established engineering manufacturer is looking for an Electrical Design Engineer to join their growing team. This Electrical Design Engineer role is an additional hire driven by continued business growth and increased demand.This is an exciting opportunity for an experienced Electrical Design Engineer to take ownership of projects from tendering through to order and fabrication, working across both technical and customer-facing environments.As an Electrical Design Engineer , you will be responsible for supporting tendering activity from the design, costing and quoting stage through to production and delivery, ensuring accuracy, quality and efficiency throughout the project lifecycle.The Electrical Design Engineer will work closely with customers, the design office and the workshop to deliver engineered solutions on time and to specification.Key ResponsibilitiesTake ownership of the customer journey from initial enquiry through to deliverySupport the design, costing, quoting, production and delivery of engineered electrical systemsPrepare and issue drawings using AutoCAD LT for customer approval and shop floor fabricationEngage with clients to understand requirements and provide technical guidanceWork confidently across customer-facing, design office and production environmentsUtilise industry-standard switchgear platforms and power factor correction systems where applicableEnsure compliance with relevant UK electrical standards and internal quality requirementsAbout YouExperienced Electrical Design Engineer with a strong foundation in electrical power distribution, switchgear or panel design would be ideal.Proficient in AutoCAD LT with a good understanding of the tendering and project delivery processCommercially aware and customer focused, with strong communication skillsA proactive problem solver who enjoys working collaboratively across teamsBenefitsSalary £47,000 to £60,000 DOEGood holiday entitlement with options to buy and sellCompany pension schemeOn-site parkingThis is an excellent opportunity for an Electrical Design Engineer seeking a long-term career move within a stable and growing engineering business.TPBN1_UKTJ

Maintenance Engineer (Electrical)£35,000 - £40,000 + £45K OTE + 2k Call Out Bonus + Funded Qualifications + Training + Progression + BonusBury St EdmundsAre you a Maintenance Engineer from an electrical background looking to join an industry leading business offering a role including on the job technical training and scope to progress into management roles in the future?In this hands-on role, you will be carrying out a wide range of planned maintenance on a variety of electrical equipment and facilities. You will be working within a tight knit maintenance team to ensure all controlled temperature facilities, along with the control panels are maintained, offering a range of day-to-day variety. This role will also offer full training on refrigeration through multiple funded courses with Star Refrigeration.Founded over 80 years ago, this global business is one of the biggest logistic companies on the globe. With a catalogue of blue-chip clients within the food industry, they provide a range of services for controlled temperature environments. From manufacturing and servicing to exportation across the globe, they aim to be the one stop for all within the industry.This role would suit a Maintenance Engineer from an electrical background looking for a role with technical training and scope to progress into management in the future.The Role:Planned and reactive maintenanceWorking on controlled temperature environmentsFull training on bespoke temperature coursesMonday to Friday 8am - 4:30pmThe Person:Maintenance EngineerElectrical Qualification (NVQ, HND/HNC)Reference Number: BBBH26653Maintenance Engineer, Maintenance, Electrical, HVAC, NVQ, 17th /18th Edition, BTEC, Technician, HVAC, PLC, Hydraulics, Fault Finding, Overtime, Days Based, Training, Refrigeration, ManufacturingIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.TPBN1_UKTJ

My client is recruiting for an experienced Commercial Gas Service Engineer to join its established service, installation and maintenance team, reporting directly to the Branch Manager. You will be joining a well respected, growing business with a strong reputation for quality workmanship, long-term client relationships and investment in its people. They pride themselves on delivering high standards across domestic and commercial environments and offer a supportive, professional working culture where engineers are valued, trusted and encouraged to develop their skills.Thisroleisidealforanengineerwithstrongknowledgeofdomesticandcommercialplumbingand heatingsystems,ideallywithexperienceacrossNaturalGas,LPGandOil-firedsystems.KeyResponsibilitiesPlannedandreactivemaintenanceofcommercialanddomesticheatingandhotwatersystemsServicingboilersandpackageburnersTestingandpurginggasinstallationpipeworkWorkingonassociatedplantroomequipment(pumps,valves,fans,controls)DomesticandcommercialboilerandplantroominstallationsInstallationusingsoldered,press-fitandscrewedsteelpipeworkBasicelectricalwiringandfaultfindingOccasionalplumbing,ventilationandgeneralplantroommaintenanceEssentialRequirementsFull,cleanUKdrivinglicenceEnhancedDBScheckGasqualificationsincluding:Domestic:CCN1,CENWAT,CKHB1,DAH1,HTR1Commercial:COCDN1,CIGA1,CORT1,CPA1,DAH1,ICPN1,HTR1,TPCP1LPGChangeover:CONGLP1PDWillingtotravelasrequiredDesirableCity&GuildsLevel3PlumbingUnventedHotWaterSystems(G3)Industrialgas,oiloradvancedplumbingexperienceUKATAasbestosawarenessPASMAandIPAFcertificationsWhatWereLookingForAreliable,safety-consciousengineerwith experience of workingincommercialenvironments.Ifyouarelookingforarolewhereyoucanuseyourskills,growprofessionally,andbepartofabusinessthatinvestsinitspeopleIwouldlovetohearfromyou. Acompanycarwillbeprovidedalongwithspecialisttoolsandfurthertraininganddevelopmentopportunities.TPBN1_UKTJ

We are seeking a Senior Industrial Door Engineer with proven experience in the maintenance and installation of a full range of industrial & commercial doors, gates, barriers and loading bay equipment. This role includes regular travel, overnight stays, and occasional out-of-hours work.Your Role as an Industrial Door Engineer:Install, Commission, maintain, and service Industrial doors and yard entrance gates.Complete pre installation site surveys.Ensuring that installations are completed efficiently to a high standard.Customer liaison to ensure client satisfaction while representing the company in a professional manor.Follow company working policies and practices.Train other members of the installation team.Ideal Candidate for an Industrial Door Engineer:Experienced Industrial door engineer with knowledge/certification of EN 16005, EN 13241, EN 12453, EN 12604, EN 12424, EN 16034, EN12445 and UKCAFull Driving LicenceCSCS CardIPAF/PASMACompany InformationWho are we?Millers Vanguard are proud to have been supporting all the UKs Supermarket chains for over 40 years, in brief, we are the people in the background ensuring that supermarkets keep the Nation fed! Maintaining a wide and varied range of assets from food production equipment through to loading bay lifts.Our service are as follows:Nationwide reactive maintenanceHygienic Deep cleaning & Planned maintenance servicesRefurbishment, logistics and installation of equipmentWe do all of this with the firm foundations of being owned by the global Ali Group, whose turnover is in excess of £4 billion p.a.Our peopleDespite being a large operation here at Millers Vanguard we still firmly believe in running the business like we have done for the last 40 years, by valuing our biggest asset we have YOUthe employee.Our team of over 380 employees have the advantage of working in state-of-the-art working environments:New Technical response centreAward Winning research, Innovation, and recycling facilityIndustry leading Mercedes Benz fleetWe believe in providing you with the very best environment and tools to do the job.Career DevelopmentTraining is also a huge part of our culture here at Millers Vanguard and our City and Guilds accredited training centre is where we coach and develop our employees regardless of your position or your length of service, we want to make sure that our staff can progress and keep pace with ever changing equipment technologies.Why Join UsTraining in our City & Guilds accredited academyJob Specific Uniform & tooling for all rolesCompany wide fun days and charity eventsCompany Pension24 days holiday allowance + bank holidaysRegular staff treats for employees and their familiesWorking Hours: 42.5 Hours + OvertimeTPBN1_UKTJ

Job Introduction:Gleeson Homes are recruiting for a Senior Engineer , responsible for supporting and assisting the Regional Technical team and operating team to support the regional and Group Business plan, commercial objectives, budgets and future growth requirements, whilst mentoring junior members of the team.This role is ideal for people who are passionate about progressing their technical career within a national, growing homebuilder. With a requirement for an eye for detail and the desire to complete tasks to a high standard.With a wealth of knowledge, and limitless opportunities, Gleeson Homes is truly, right where you belong.Main Responsibilities:At Gleeson Homes, we're genuinely passionate about what we do. We invest in our people and our communities, building homes, changing lives. We're looking for an ambassador of the Gleeson Brand, who works passionately, collaborative and respectfully.As a Senior Engineer, you will:Provide technical/engineering support to the land/development team to assist during feasibility studies and lead in the preparation of site viability reports in line with current regulatory requirements for residential development.Identify the need for external consultants, agree fees, the scope of service capability, timescales and deliverability.Manage relationships with consultants to ensure the flow of information is within the agreed timescales and in accordance with, and on schedule with the programme and in line with the National Housebuilding council standards.Be aware of and act upon commercial implications relating to planning & architectural design; civil & structural engineering design; geotechnical & ground remediation strategies; statutory services - new supplies & diversions.Assist in the process of tendering for, setting-up and establishing on site management companies, whilst implementing the group procedures and ensuring all legal aspects in relation to various agreements.Interact with internal departments, consultants, suppliers and sub-contractors as necessary in order to achieve Building Regulations and warranty approval and satisfactory conditions discharge.Assist in the preparation of key status reports and updates on all KPIs relating to the Technical function.Co-ordinate the appointment of utilities, including designs, quotes and any required agreements.Responsible for managing the Adoption process.Provide engineering support to site teams and Internal departments.Be present on site and lead on relevant technical meetings relating to the procurement and approval of site infrastructure.The Ideal Candidate:A relevant qualification or strong experience in technical design, and/or civil engineeringKnowledge of engineering requirements of the house building industry and the legal framework associated with Technical standards and requirements.Knowledge and application of:- Highway Design Standards- Sewers for adoption- Building Regs- British Standards- AutoCADGood Technical and legal knowledge and Financial/Commercial awarenessGood Organisational skillsFlexible and adaptable to changing requirementsGood verbal and written communicationAwareness of Type approval with NHBC, LABC and SBDNumerical and LiterateBenefits:Generous holiday entitlement of 26 days per annum + bank holidaysChoice of company car/ car allowanceDiscretionary Bonus SchemeHoliday Buy Back SchemeCompany Pension SchemePrivate Medical Insurance SchemeHealthshield membershipLife Assurance SchemeShare Purchase PlanHighstreet/ Store DiscountsDevelopment OpportunitiesTPBN1_UKTJ

Are you a skilled maintenance professional looking to make a real impact on asset reliability and performance? At Arla Stourton Dairy, were looking for a Shift Engineer to join our process department and play a key role in improving maintenance execution and reducing unplanned downtime.This role sits within the Stourton Process Engineering team who work 12 hour shifts, 4 on 4 off (no nights).How you will make an impactIn this role, you will take ownership of delivering high-quality maintenance across our process area. Youll work collaboratively with operations and engineering colleagues to strengthen our maintenance culture, enhance technical standards, and support continuous improvement across the site.Your key responsibilities will includeExecute planned and preventative maintenance activities across process assets, including pasteurisers, heat exchangers, valves, pumps and instrumentation equipment, driving reliability and minimising downtime through effective planning and execution.Using SAP CMMS and FastWork to record maintenance activities and support top-loss reviews and action closure.Ensuring OEE is realised through data analysis and effective CI work, including leading RCAs and maintaining technical standards such as SOPs, SMPs and work instructions.Acting as an ambassador for safety and food quality, championing LOTO, Permit to Work and other site protocols.Providing technical input to CAPEX projects.What will make you successfulYou are a proactive, technically skilled maintenance professional who takes ownership and enjoys driving improvements. You bring strong problem-solving abilities and the confidence to collaborate across departments.You will ideally have completed a Modern Advanced Level Apprenticeship to Level 3 in Engineering Maintenance or an equivalent qualification, supported by proven experience in a maintenance or technical engineering position within a fast-paced production environment. Familiarity with maintenance methodologies such as CBM, RCA, FMECA and the use of CMMS systemsincluding SAP PMis also desirable.To thrive in this role, you will be someone who naturally supports knowledge sharing across both operations and engineering teams. Youll bring a curious, continuous-improvement mindset and be motivated by finding better ways of working. Above all, you will have a strong safety-first approach that guides every task you undertake.What do we offer?Were committed to your growth and development, offering internal and external training opportunities. Youll enjoy a competitive salary, 24 days holiday, matched pension contributions up to 6%, life assurance, and flexible benefits. At Stourton, youll join a team proud of its high job satisfaction and steep learning curve, with plenty of challenges and support to help you succeed.Would you like to join us?We have a purpose for GoodAt Arla, we strive to unlock the highest potential in each other while working together to create a sustainable future of dairy. We call it Stronger People Stronger Planet and it is deeply anchored in our organisation and founded on our commitment to respecting human rights, increasing access to healthy dairy nutrition, inspiring good food habits, and improving the environment for future generations. In order to succeed we need to hire people with a sustainable mindset. Could this be you?BEWARE! RECRUITMENT FRAUDIt has come to our attention that there are a number of fraudulent emails and fake recruitment campaigns on the internet from people purporting to work for Arla Foods. Learn more via this link.Shape the Future of DairyArla is a global leader in the dairy industry, committed to enabling good food choices that make life better, providing people with natural, sustainable nourishment, while taking care at every step to ensure Arla is a choice they can feel good about. If you are looking to shape the future with an ambitious global cooperative that truly cares about your growth, where everyone feels valued and empowered, and collaboration is the core of culture, Arla is a choice you can feel good about.TPBN1_UKTJ

We are seeking a Powered Access Engineer to join our dynamic workshop team.You will be responsible for the maintenance, repair, and inspection of powered access equipment, such as scissor lifts. This role requires technical expertise and a focus on safety to ensure that all equipment operates efficiently and meets regulatory standards.Duties as a Powered Access Engineer:Conduct thorough inspections of scissor lift machines to assess repair, replacement, or refurbishment needs, utilising initial field inspection reports.Perform standard diagnostic tests on machine components to determine their condition.Compile a detailed list of required parts and materials for machine preparation work.Perform overhaul, repair, or refurbishment tasks on scissor lifts in accordance with the agreed scope of work, which involves the removal of components, as well as the installation of original or replacement parts.Inspect and test completed machines to ensure they operate at expected performance levels.Specific Skills required for a Powered Access Engineer:Flexibility, organisational skills, and effective time management.Exceptional attention to detail and commitment to quality.Ability to work autonomously and collaboratively within a team.communication and interpersonal skills, fostering positive relationships.Organisational abilities, capable of working efficiently and meeting tight deadlines.Effective problem-solving skills.Knowledge:Level 2 NVQ / City & Guilds Mechanical Engineering, Electrical knowledge would be an advantage.Understanding of hydraulic, and mechanical systems.Familiarity with workshop Health and Safety practices.Internal training in the aspect of Powered Access / Scissor lifts will be given to the successful Candidate.Company InformationWho are we?Millers Vanguard are proud to have been supporting all the UKs Supermarket chains for over 40 years, in brief, we are the people in the background ensuring that supermarkets keep the Nation fed! Maintaining a wide and varied range of assets from food production equipment through to loading bay lifts.Our service are as follows:Nationwide reactive maintenanceHygienic Deep cleaning & Planned maintenance servicesRefurbishment, logistics and installation of equipmentWe do all of this with the firm foundations of being owned by the global Ali Group, whose turnover is in excess of £4 billion p.a.Our peopleDespite being a large operation here at Millers Vanguard we still firmly believe in running the business like we have done for the last 40 years, by valuing our biggest asset we have YOUthe employee.Our team of over 380 employees have the advantage of working in state-of-the-art working environments:New Technical response centreAward Winning research, Innovation, and recycling facilityStylish, modern Volkswagen VanWe believe in providing you with the very best environment and tools to do the job.Why Join UsJob Specific Uniform & tooling for all rolesCompany wide fun days and charity eventsCompany Pension24 Holidays per year plus bank holidaysRegular staff treats for employees and their familiesMonday Friday 08.00am 17.00pmJob Types: Full-time, PermanentBenefits:Company pensionFree parkingLife insuranceCompany EventsTPBN1_UKTJ

CAD Designer Location: Bury Salary: £38,000 Full-Time | Permanent We are looking for a talented and detail-focused CAD Designer to join our growing engineering team. This is an exciting opportunity to play a key role in the design and development of products, supporting both production and sales functions while working on a variety of projects in a fast-paced manufacturing environment. If you have strong 2D and 3D CAD design experience and enjoy seeing your designs move from concept through to production, we'd love to hear from you. The Role As a CAD Designer, you will be responsible for producing accurate technical drawings, managing engineering change requests, supporting manufacturing processes, and ensuring all design documentation is maintained to the highest standards. Key Responsibilities • Create and maintain detailed 2D and 3D CAD drawings., • Provide technical support to production and sales teams on a day-to-day basis., • Generate part numbers, Bills of Materials (BoMs), assembly instructions, and production visual aids., • Implement engineering changes and supplier/customer change requests., • Liaise with third-party manufacturers, issuing DXF, STEP files, and technical drawings., • Support budget and cost control activities across projects., • Identify and drive continuous improvement initiatives within the design and production process., • Ensure compliance with bodybuilding guidelines and operational requirements., • Manage the approval process for new product samples and product revisions., • Maintain company ISO standards and quality documentation., • Work collaboratively with internal teams and external suppliers to ensure project success. What We're Looking For Essential Skills & Experience • Proficient in AutoCAD, Inventor, and/or SolidWorks., • Experience producing engineering and manufacturing drawings., • Strong understanding of Bills of Materials and assembly documentation., • Excellent communication skills with the ability to work across multiple departments., • Strong organisational skills and exceptional attention to detail., • Ability to work independently and as part of a team. Desirable Skills & Experience • Experience using Trailwin., • Previous experience within the vehicle bodybuilding industry., • Knowledge of manufacturing processes and quality management systems. Why Join Us? • Be part of a supportive and collaborative engineering team., • Work on exciting projects from concept through to production., • Opportunities for professional development and career progression., • Competitive salary and benefits package. Apply Now If you're a motivated CAD Designer looking for your next challenge and have the skills and experience we're looking for, we'd love to hear from you.

Leonard Curtis is seeking a Data Warehouse Architect to establish and optimise a unified enterprise data platform that enables data‑driven decisions. You will bridge raw data to business insight, designing scalable Lakehouse and data warehouse architectures with robust security and governance. The

We are looking for a driven Manufacturing Engineer to join our team and help us improve the way we manufacture high-quality products. This is an exciting opportunity for an engineer, who enjoys problem solving, process improvement and turning ideas into practical solutions. The Role Working closely with production, quality, design and supply chain teams to improve manufacturing efficiency, reduce waste and deliver consistent quality. You will take ownership of engineering improvements from identifying an opportunity through to implementation on the shop floor. Key Responsibilities Develop and continuously improve manufacturing processes and production methods. Identify and implement improvements to quality, cost, efficiency, and productivity. Investigate production issues and provide effective root-cause solutions. Create and maintain work instructions, process documents, and manufacturing standards. Support new product introductions (NPI), process validation, and production launch activities. Work with production teams to improve equipment, tooling, layouts, and workflows. Support lean manufacturing initiatives including waste reduction and process optimization. Ensure manufacturing processes meet relevant quality safety and regulatory requirements. Specify and manage cutting tools, fixture, and assembly equipment. About you Qualified in manufacturing, mechanical, industrial engineering or related disciplines. Experience within a production engineering environment. Comfortable working with production data and engineering documentation Knowledge of lean manufacturing and process improvement A strong communicator who can work effectively across different teams Experience within a CNC or tooling environment would be an advantage. Knowledge of CAD Cam software Whats on offer. Competitive salary and benefits Opportunity for professional development The opportunity to make a measurable impact on manufacturing performance. Training and support to develop your technical and leadership skills. If you ready to make a difference and are passionate about engineering and continuous improvement to make manufacturing processes work better, we would love to hear from you. TPBN1_UKTJ

Are you a Technical or Scientific Service Engineer looking to concentrate your work within Manchester? Are you looking to do local site-based customer-facing work, while keeping an element of variety? Due to our rapid expansion, an opportunity has arisen for a Technical Service Engineer / Scientific Support Engineer, to manage our state-of-the-art robotics solutions within the pharmaceutical and biotechnology markets. BASIC SALARY: £52,000 - £56,000 BENEFITS: · Monthly £150 On-Call Allowance + £120 for additional call out · Company Pension Scheme (minimum employee contribution of 4%, Company will pay 5% and match up to 8%) · Performance Bonus · 25 Days Annual Holiday (Plus Statutory Days) · Group Income Protection Scheme · Private Health care including Optical & Dental · Life Assurance etc. LOCATION: Manchester COMMUTABLE LOCATIONS: Stockport, Salford, Sale, Bury, Oldham, Altrincham, Wilmslow, Rochdale, Bolton, Stalybridge, Cheadle, Warrington, Glossop, Stretford, Northwich. JOB DESCRIPTION: Field Service Engineer, Technical Service Engineer, Technical Support Engineer, Scientific Service Engineer - robotics, automation, pharmaceutical, life sciences, medical, biotechnology You will be our main Field Service Engineer for the Manchester area. Travel outside of this area will also be required from time to time, occasionally spending time away. We will train you extensively from Day 1, on our products, systems, IT, procedures, applications, and customers. This is an on-site role, immersing yourself with key customers, their visions, needs and aspirations. KEY RESPONSIBILITIES: Field Service Engineer, Technical Service Engineer, Technical Support Engineer, Scientific Service Engineer - robotics, automation, pharmaceutical, life sciences, medical, biotechnology As our Technical Service Engineer, you will: · Become the service subject Matter Expert for our customers. · Perform remote support and diagnostics. · Manage the escalation flow to ensure timely customer follow-up until issue is resolved. · Ensure Preventative Maintenance Procedures, intervals, and schedules are correct and complete. · Identify / forecast spare parts requirements · Utilise D365 Service Reports, RMAs & monthly KPI reports. · Handle all service calls timely and professionally. · Communicate with customer, R&D, Customer Service, Product Management, Manufacturing and Sales, ensuring superior customer satisfaction. · Provide 24/7 remote and on-site service on a rotating model. PERSON SPECIFICATION: Field Service Engineer, Technical Service Engineer, Technical Support Engineer, Scientific Service Engineer - robotics, automation, pharmaceutical, life sciences, medical, biotechnology You will have: · Technical background (electrical, mechanical, IT), within complex machinery, in an industry such as: Heavy Engineering, Life Sciences, Medical Equipment, Mining, Automation, Robotics, Shipbuilding, Marine, Drilling, Biotechnology (or similar). · Either a technical Degree, HNC, HND, or time-served professional experience equivalent. · Strong customer-centric / customer-facing pedigree. · Creative problem-solving mindset, driven by the motivation to assist customers, sales & service personnel, to overcome obstacles and challenges. · Experience of Microsoft 365 or equivalent, Active directory, and SQL databases (we provide relevant training). · Experience of IP addressing, Remote Desktop Protocols, & Driver Support. · Knowledge of Beckhoff Twin CAT, Elmo Studio, Vision Systems, and Barcode Reading. · Capability of working reliably / resiliently. NB : This job requires exerting up to 50 pounds of force occasionally and / or negligible amount of force frequently or constantly to lift, carry, push, pull, or otherwise move objects. OUR COMPANY: We are the fastest-growing division of a multinational branded R&D manufacturing Group. Our division has over 80 staff, across 12 countries. For the past 75 years we have innovatively developed, pioneered, built and created customer-led product solutions within the fields of Life Sciences, Medical Devices, Robotics, and Automation. We are culturally diverse, with a cooperative, down-to-earth environment. Not only do we offer a motivating working style, but also modern working conditions backed by a commitment to training and personal advancement. PROSPECTS: This position offers unrivalled training and development. This is an area where we deliver many resources, aiming to keep your skills fresh, and at the leading edge. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Technical Service Engineer, Technical Support Engineer - Robotics, Automation, Pharmaceutical, Life Sciences, Medical, Biotechnology, Medical Devices, Mining, Heavy Engineering, Scientific Instruments INTERESTED? Please click apply. You will receive an acknowledgment of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18616, Wallace Hind Selection TPBN1_UKTJ

Electrical Engineer Oldham Up To £41,000 + Benefits Days We are looking for a motivated Electrical Engineer to join a growing engineering team based in Oldham. Reporting directly to the Engineering Manager, you will play a key role in the design, installation, commissioning, and ongoing support of electrical control systems across a variety of industrial applications. This is an excellent opportunity for an engineer with strong electrical knowledge and hands-on experience in PLC programming, commissioning, and installation. The company is committed to investing in its people through ongoing training and development, providing opportunities to enhance your technical skills while working on a diverse range of projects. The role will suit an ambitious Electrical Engineer looking for a technically challenging position within a stable and forward-thinking organisation. Role Description PLC programming, modification, and fault-finding on a range of control systems Electrical installation and commissioning of industrial machinery and automated equipment Testing and validation of electrical control panels and systems Diagnosing and resolving electrical faults both on-site and remotely Supporting project delivery from design through to commissioning Producing and updating technical documentation where required Working closely with customers and internal teams to ensure successful project completion Reporting directly to the Engineering Manager Occasional travel to customer sites for commissioning and support activities Skills & Qualifications Previous experience as an Electrical Engineer, Controls Engineer, or Automation Engineer Strong PLC programming experience (Siemens, Allen Bradley, Mitsubishi, or similar) Proven commissioning and electrical installation experience Ability to read and interpret electrical schematics and technical drawings Electrical Engineering qualification (Apprenticeship, NVQ, HNC/HND, or equivalent) Experience with industrial control panels and automation systems Strong electrical fault-finding and problem-solving skills Excellent communication skills and a customer-focused approach Full UK Driving Licence desirable This is a fantastic opportunity to join a well-established company offering varied project work, technical development, and long-term career progression within the industrial automation and controls sector. TPBN1_UKTJ

Senior Geo-Environmental Engineer Our Opportunity Here at Pick Everard, we are passionate about creating a prosperous and sustainable future, taking a fresh perspective on the built environment. Our core values of professionalism, compassion, drive and positivity are at the heart of everything we do. Were looking for a Senior Geo-Environmental Engineer to join our growing UK Environmental team based in our Manchester office. Are you looking to secure a rewarding and challenging role within a growing, innovative multi-disciplinary practice? Do you want to work within a collaborative, supportive team on a range of prestigious projects? If so, this is your opportunity to make an impact. As part of a team committed to technical excellence, collaboration and exceptional client service, youll play a key role in delivering innovative geo-environmental solutions across the North West. As an experienced Geo-Environmental specialist, youll help lead and develop our offering in this growing discipline. Youll provide technical expertise across a diverse portfolio of projects, including infrastructure, water frameworks, prestigious heritage and defence sites, while helping to shape the future of our environmental services. Key Responsibilities: - Provide geotechnical and / or contaminated land advice to our multi-professional teams - Work to ensure projects are delivered safely, efficiently and on time - Manage site investigation contracts - Design and supervise Phase 1 and Phase 2 ground investigations - Undertake geotechnical design work and / or prepareGQRA and DQRA and remedial strategies - Support the wider environmental team across a variety of technical projects As part of our multi-disciplinary practice, youll collaborate with talented professionals across a wide range of sectors, gaining exposure to high-profile projects that will continue to develop your technical expertise and career. Were proud to offer a supportive and inclusive culture, genuine opportunities for career progression, and the chance to influence and shape the future of our Geo-Environmental discipline. Ready to take the next step in your career from the heart of Manchester? Wed love to hear from you. About You Our ideal Senior Geo-Environmental Engineer should have: - A relevant degree in Engineering, Geology, Geography or a related scientific discipline. - Chartered status, or be working towards a professional qualification (e.g. CGeol, CSci, CIWEM, IEMA or ICE). - Experience managing geo-environmental and ground investigation projects, including scoping, procuring and managing site investigations. - Experience preparing Phase 1 Geo-Environmental Desk Studies, factual and interpretative Phase 2 Site Investigation Reports, and Ground Investigation Reports. - Experience undertaking GQRA, alongside either DQRA or geotechnical design (e.g. foundation and pile design, earthworks specifications or slope stability assessments). - Experience managing site investigation contractors in accordance with CDM 2015, with a sound understanding of the Principal Contractor role. - The ability to mentor and support junior team members, both in the office and on site. - Strong client-facing skills, with the confidence to liaise with clients, contractors and regulators. - Experience preparing Construction Phase Plans and Flood Risk Assessments would be advantageous. - Strong organisational skills, with the ability to manage multiple projects. - Excellent written, verbal and visual communication skills. - A collaborative, proactive and self-motivated approach to work. - Awareness and application of relevant British Standards, including BS 5930, BS EN 1997-1 & 2 and BS 10175. - Knowledge of AGS data format, OpenGround, QGIS, AutoCAD and Microsoft Office. - Full UK driving licence would be beneficial as projects are across the UK. - SMSTS qualification. - CSCS Card. - CAT and Genny training. Unsure you tick every box? We still encourage you to apply as your experience might be a great fit for this role or other opportunities in our team. About Us Our nationwide multidisciplinary team of 780+ employees, work collaboratively to deliver outstanding places and spaces that create lasting value for local communities. Through our remarkable history we have established the sound principles of success, and we have the vision and ambition to be even better. Were committed to creating sustainable communities where everyone feels safe, cared for and valued. We achieve that by encouraging a diverse, welcoming workplace for our people, clients and colleagues. We care about our people and improving our society and that means supporting your ambitions and interests at every level. We will provide you with an inspiring environment in which you will be able to drive real progress and impact in your career. What we offer Providing a balanced, enjoyable career is important to us, and we work hard to make sure everyone feels a valued part of our organisation. You will receive an attractive salary, and amongst other benefits you can also expect: - Agile working. - Career and Professional Development. - Corporate Social Responsibility opportunities. - 26 days annual leave + Bank Holidays + option to buy up to 5 days additional leave. - Private healthcare, life assurance and healthcare cash plan. - Stakeholder pension. - Professional subscriptions. - Employee Discount Scheme. - Eyecare Scheme. - Wellbeing support and Employee Assistance Programme. Equal Opportunities As an equal opportunities employer, Pick Everard is committed to the equal treatment of all current and prospective employees and does not condone discrimination on the basis of age, disability, sex, sexual orientation, pregnancy and maternity, race or ethnicity, religion or belief, gender identity, or marriage and civil partnership. We aspire to have a diverse and inclusive workplace and strongly encourage suitably qualified applicants from a wide range of backgrounds to apply and join us on our journey. Accessibility Were committed to helping you perform at your best throughout the recruitment process. If you have a disability or require any adjustments to support your application or interview, please get in touch with us at Well be happy to discuss how we can assist you. Agencies We are committed to building and nurturing great relationships with our agency partners. However, this role is being recruited for directly and therefore we are not seeking support at this time. Any unsolicited CV Introductions will not be accepted. #LI-Hybrid #LI-JJ1