Offres electrical testing à BoltonCréer des alertes d'emploi

Manufacturing / Electronics Test Engineer (Production Environment)Guidant Global is partnering with a leading UK defence organisation to recruit a hands-on Electronics Test Engineer to support the manufacturing test and fault diagnosis of complex electrical and electronic assemblies .This is a practical, production-based role focused on diagnosing faults down to circuit card and component level , working directly with test equipment in a manufacturing environment not a desk-based design role.What youll be doingSupporting manufacturing test and diagnostics of electrical and electronic sub-systemsInvestigating failures down to circuit card and component levelUsing a wide range of manual and automated test equipmentIntroducing and supporting new test facilities, specifications and operator instructionsWorking closely with production and quality teams to maintain build schedulesContributing to defect reviews and corrective actions within a controlled defence environmentWhat were looking forEssentialHNC (or equivalent) in Electronic / Electrical EngineeringStrong hands-on experience with electronic test and fault findingGood understanding of digital and analogue measurement techniquesExperience using equipment such as oscilloscopes, DMMs, signal generators and power suppliesComfortable producing test instructions, specifications and technical reportsDesirable (not essential)RF / Microwave exposure at sub-system levelExperience with automated test equipment (ATE)Environmental or high-voltage testing awarenessDefence or regulated manufacturing experienceSAP exposureTest equipment youll regularly useOscilloscopes, DMMs, power supplies, signal generatorsSpectrum analysers / VNAs (where applicable)RF measurement equipment in a controlled test environmentWhy this role Hands-on engineering real faults, real test equipmentStable, long-term defence programmesSupportive engineering teamClear processes and production support (not firefighting)Security Clearance :British Citizen or a Dual UK national with British citizenshipRestrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.More about the role:For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air.This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen.TPBN1_UKTJ

Electrician Location: Bolton - Travelling Nationwide Start Date: ASAP Salary: £35,000 - £42,000 + Benefits Due to continued growth across a secure, long term contract, we are looking for a qualified Electrician to join a well established team based in Bolton. This is a great opportunity to join a stable organisation offering long term career progression, training, and excellent benefits. What's in it for you? Company van & fuel card Salary of £35,000 - £42,000 Flexible overtime opportunities Access to mental health support Fully funded training & career development Company pension plan The Role As an Electrician, you will be responsible for maintaining electrical systems across a large commercial site, ensuring all work is completed safely, efficiently, and to a high standard. This is a varied role with daily challenges and opportunities to develop your skills. Key Responsibilities Fault finding and resolving electrical issues Emergency lighting testing and repairs General lighting and power maintenance Electrical compliance testing Recording work accurately using mobile devices Ensuring all work meets company and client standards What we're looking for Qualified Electrician (relevant certifications required) UK Driving License Strong fault finding and maintenance experience Ability to work independently and within a team Commitment to high standards of health & safety Apply now to join a growing organisation offering stability, development, and long term opportunity

Our client has an opportunity for a Production Test Engineer to join their team on a contract basis for 12 months. As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Role: Production Test Engineer Location: Bolton, fully onsite Hours: 37 per week Hourly Rate: £34-£37 per hour via Umbrella, inside IR35 Clearance: BPSS required before starting, SC to follow What you'll be doing: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment. Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level. Generating test specifications, operator instructions and technical reports - based on higher-level requirements and information. Promptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures. Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations. Requirements: Essential: Minimum HNC level of Engineering qualifications or equivalent. Good understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level. Awareness of electrical/electronic sub-system and system design, integration and test principles. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports. Ability to plan and organise one's work according to assigned priorities. Advantageous: Knowledge of RF and Microwave technology at the subsystem level. Experience in operating manual and automated test equipment in an Electronics Manufacturing environment. If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

Approach Personnel are currently recruiting for an experienced Maintenance Electrician to join the on-site engineering team in Bolton. This is a static site role, offering the opportunity to work within a well-established facilities management team, carrying out planned and reactive maintenance. The successful candidate will be responsible for ensuring the safe, efficient, and compliant operation of electrical systems throughout the shopping centre and associated facilities. Working Hours Monday to Friday Key Responsibilities Carry out planned preventative maintenance (PPM) on electrical systems and equipment. Respond to electrical breakdowns and reactive maintenance requests. Fault-find, diagnose, and repair electrical systems. Undertake minor electrical installation works as required. Complete routine inspections and testing of electrical equipment. Ensure all maintenance activities are completed in line with statutory regulations and health & safety requirements. Accurately complete maintenance records and job reports using the CAFM system. Liaise with centre management, retailers, contractors, and fellow engineering team members. Support wider building maintenance activities when required. Requirements NVQ Level 3 in Electrical Installation (or equivalent). 18th Edition Wiring Regulations. Previous experience within commercial maintenance, facilities management, retail environments, or similar sectors. Strong fault-finding and problem-solving abilities. Good understanding of health and safety legislation. Ability to work both independently and as part of a team. Strong communication and customer service skills. Desirable Qualifications & Experience City & Guilds 2391 Inspection & Testing. Experience working within shopping centres, retail environments, or large commercial buildings. Knowledge of HVAC systems, fire alarms, and emergency lighting. * If you're a qualified Maintenance Electrician looking for a stable, long-term role with excellent career development opportunities, we'd like to hear from you

Electronic Test Operator Initial 12-months Bolton (onsite) £28.35ph, UMB inside IR35 (rising to £29.70ph after 12 weeks) Please note, this role does require SC level Security Clearance and will be working on "UKEO" programmes, meaning the post is only open to sole British nationals due to the nature of work. The Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Specific responsibilities include: Certify the product in line with Product Certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Carry out setting-up procedures for testing, to include the awareness of the need for periodic recalibration of test equipment. Carry out tests on electronic equipment in accordance with test instructions, using specified test equipment. Carry out simple fault-finding procedures on electronic equipment. Keep test records and reporting faults for rectification. Ensure manufacturing test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Communicate best practice to other team members. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21/ONC. Formal further education certificate to HNC or equivalent certificate. Manual handling training. Lifting & Slinging training (Including overhead cranes). ESD training. No colour blindness. Essenitial Requirements: Electrical Apprenticeship in One Of The Following Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 Vocational NVQ3 with Further Education, BTEC ONC/HNC Qualifications must be in Electrical Manufacturing/Engineering subjects Please only apply if you are able to meet the security clearance resctrictions & hold the relevent qualifactions listed above

Production Test Engineer - Electronics required for long term contract assignment based in Bolton Skillset/experience required: Essential: Minimum HNC level of Engineering qualifications or equivalent. Good understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level. Awareness of electrical/electronic sub-system and system design, integration and test principles. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports. Ability to plan and organise one's work according to assigned priorities. Advantageous: Knowledge of RF and Microwave technology at the subsystem level. Experience in operating manual and automated test equipment in an Electronics Manufacturing environment. Overview of department: As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Responsibilities: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment. Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level. Generating test specifications, operator instructions and technical reports - based on higher-level requirements and information. Promptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures. Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/ or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website

Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Do you hold an HNC or higher in an engineering discipline? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing test engineering support to operators on the shopfloor Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information Identify remedial and corrective actions Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your skillset may include: Minimum HNC level of Engineering qualifications or equivalent A good understanding of digital and analogue electronic measurement and test principles, and associated equipment down to component level Awareness of electrical/electronic sub-system and system design, integration, and test principles. An understanding of RF and microwave technology at subsystem level An understanding of Environmental testing (including ESS) Operating manual and automated test equipment in an electronics manufacturing environment If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Hourly Rate: £37 per hour Development and Production Test Engineer Electronic / Electrical Job Description: As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagn

Vehicle Technician -Bolton Salary Up to £42,000 Basic + Bonus (up to £6,000) + Overtime DOE & Qualifications Days Monday Friday, 8:30am - 5pm, Saturdays on a rota Ref 29814 We have a new job vacancy available for a Vehicle Technician in Bolton. My client is one of the UK's leading main dealer groups in thearea and they're looking for an experienced Vehicle Technician wanting to join agreat team! This is a great opportunity for a Vehicle Technician looking to work for and alongside one of the best in the industry, so if youre on the lookout then apply now! Vehicle Technician Benefits: Excellent Bonus Opportunities In house training opportunities for career progression Great pension scheme Company Discounts Vehicle Technician Role: Carry out servicing and maintenance of all vehicles Electrical, mechanical, and hydraulic fault diagnosis and repair, this work may include warranty approved work in line with our brand parameters Department of Transport (MOT) testing duties (if qualified) Vehicle Technician Requirements: Full UK driving license NVQ, IMI, ATA or City & Guilds level 3 ideally but we will also consider level 2 with a lot of experience (If youre a level 2 Vehicle Technician with main dealership experience then definitely apply!) MOT license is preferred but not essential Octane Recruitment Consultant Al-amin Abiru AAVT Octane Recruitmentis a specialist Automotive and Motor Trade recruitment agency, working with main dealerships, bodyshops, tyre management companies, parts distribution centres, independent garages, fleet operators, HGV companies, import centres and manufacturers across the UK. We recruit across the motor trade and related industries. TPBN1_UKTJ

Maintenance Electrician Meridian are working with a well-established M&E contractor in the North-west who are growing their maintenance team. With a wide variety of work on commercial contracts in the area, there are plenty of additional earning possibilities as well as a strong benefits package. If you're looking for a stable and rewarding role as a Maintenance Electrician then this is perfect for you! Benefits include (but are not exclusive to): Starting salary£42k p.a Additional overtime, shifts, and weekends may be available depending on call-outs and projects Company Vehicle with additional fuel card Immediate start available (subject to successful application) Working on regionalised commercial projects across the North-west NEST Company pension scheme Sickness and Death in Service schemes 21-days holiday plus Bank Holidays, with additional holiday purchase scheme available Progression, upskilling, and training Requirements for this role: Qualified Electrician - Installation or Approved Electrician JIB Gold card 2391 or equivalent Inspection and Testing qualifications desirable but NOT essential Proven experience in commercial electrical maintenance Strong understanding of electrical systems, safety standards, and fault-finding Ability to work independently and as part of a team Excellent communication and customer service skills Good communication, teamwork, and customer service skills Full and valid UK Driving Licence Duties include (but are not exclusive to): Diagnosing and repairing electrical faults Performing routine inspections and preventative maintenance Being available for a call-out rota when needed EICR Testing, Emergency Lighting Testing,distribution board servicing, power & lighting rip out and upgrades Installing, upgrading, and maintaining electrical equipment Responding to reactive maintenance requests Ensuring compliance with all electrical and safety regulations Working with onsite customers and clients to help diagnose and problem solve where required If you are looking to join a growing maintenance team with increasing regionalised work, then please apply directly to the advert or email for more information Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Agency for this vacancy. TPBN1_UKTJ

Carry out planned and reactive maintenance as instructed by the Contract Manager, including fault finding, testing, repair and preventative maintenance of electrical building services equipment. Electrically biased trades person based on site as a single operative undertaking planned preventative ma

Advinia Healthcare is seeking a Maintenance Operative to perform day-to-day maintenance and improvements across our Bolton care home. Responsibilities include basic plumbing/electrical tasks, decorating, fire alarm testing, and assisting deliveries, with opportunities for training and career progres

Salary: Up to £25 per hour + Overtime Hours: 40 hours per week - daytime shifts, with flexibility The Role An exciting opportunity has arisen for an experienced PCV Engineer to join a busy Engineering Department and play a vital role in keeping a modern commercial vehicle fleet safe, reliable and operational. You'll be responsible for the inspection, servicing, maintenance and repair of PCV and HGV vehicles, ensuring all work is completed to a high standard and in line with current safety and regulatory requirements. This is an excellent opportunity for an engineer looking for stability, good working hours, paid overtime and genuine opportunities to develop their skills and qualifications. Key Responsibilities • Carry out scheduled 6-weekly inspections and preventative maintenance • Diagnose mechanical and electrical faults using modern diagnostic equipment • Complete servicing, repairs and maintenance to PCV vehicles • Identify faults efficiently and carry out effective repairs to minimise vehicle downtime • Prepare vehicles for MOT and annual testing • Ensure all vehicles meet required safety and regulatory standards • Complete maintenance records, inspection sheets and other relevant documentation accurately • Work safely and professionally at all times, maintaining high standards of workmanship • Support the wider Engineering team to ensure the fleet remains operational and road-ready About You We're looking for an experienced and motivated engineer who takes pride in their work and understands the importance of vehicle safety and reliability. You'll ideally have: • Relevant engineering qualifications or proven experience working on PCV or HGV vehicles • Previous experience in commercial vehicle maintenance • Strong mechanical fault-finding and diagnostic skills • Good IT and administrative skills • Excellent communication and teamwork skills • A full UK driving licence • A professional, reliable and safety-focused approach • A willingness to obtain a PCV licence - training can be provided What's On Offer • Competitive salary with attractive overtime rates • 40-hour working week • Predominantly daytime shifts • Flexible working arrangements • Paid weekend on-call rota following a qualifying period • 28 days annual leave, increasing to up to 33 days with bonus holiday allowance • IRTEC training and qualifications • Ongoing technical training and upskilling • Long-term career development opportunities • A stable position within an established and growing engineering environment Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a number of Development and Production Test Engineer - Electronic/Electrical subcontractors on an initial 12 month contract. Looking for somebody with substantial test engineering experience. Diagnosis of test failures Testing experience down to component level The department are keen to hear from candidates from a background with Electronics, RF, Microwave skills or candidates that have strong Test, Diagnostics, Repair Engineering skills. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Hourly Rate: £37 per hour Development and Production Test Engineer – Electronic / Electrical Job Description: As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Responsibilities: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment. Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level. Generating test specifications, operator instructions and technical reports - based on higher-level requirements and information. Promptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures. Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations. Skillset/experience required: Essential: Minimum HNC level of Engineering qualifications or equivalent. Good understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level. Awareness of electrical/electronic sub-system and system design, integration and test principles. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports. Ability to plan and organise one's work according to assigned priorities. Advantageous: Knowledge of RF and Microwave technology at the subsystem level. Experience in operating manual and automated test equipment in an Electronics Manufacturing environment

Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Do you hold an HNC or higher in an engineering discipline? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing test engineering support to operators on the shopfloor Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information Identify remedial and corrective actions Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your skillset may include: Minimum HNC level of Engineering qualifications or equivalent A good understanding of digital and analogue electronic measurement and test principles, and associated equipment down to component level Awareness of electrical/electronic sub-system and system design, integration, and test principles. An understanding of RF and microwave technology at subsystem level An understanding of Environmental testing (including ESS) Operating manual and automated test equipment in an electronics manufacturing environment If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Maintenance Engineer Bolton 3 Shift Pattern £48,000 + Bonus A leading global automotive supplier specialising in advanced vehicle components and systems for major OEMs worldwide. Join a world-class team driving the future of automotive manufacturing We are a premier Tier 1 automotive supplier with a strong presence in the UK, delivering innovative, high-quality components to the world's leading vehicle manufacturers. Our Bolton facility is a key high-volume production site focused on precision assembly and testing systems, and we are now seeking an experienced Maintenance Engineer to join our dynamic engineering team. This is a hands-on role ideal for a proactive, skilled tradesperson who thrives in a fast-paced, high-output manufacturing environment. You will play a critical role in maximising equipment uptime, driving continuous improvement, and supporting our commitment to world-class production standards. Responsibilities – Maintenance Engineer Troubleshooting, repair, and maintenance of high-volume PLC-controlled production equipment Planning and performing preventative maintenance on critical assets Improvement and modification of assembly/test equipment and transfer systems Service and maintenance of electrical and mechanical site services/plant Supporting the installation and commissioning of new equipment Experience/Qualifications - Maintenance Engineer Ideally qualified to ONC/HNC level (or equivalent) in Mechanical/Electrical Engineering, supported by City & Guilds Part 3 (or similar) and NVQ Level 2 & 3 Time-served apprenticeship in a relevant engineering discipline Significant hands-on experience (minimum 2+ years) in high-volume manufacturing environments Proven track record in equipment repair, maintenance, and process improvement Experience in fitting, fabrication, and machining is highly advantageous Strong background in maintenance and fault-finding on PLC-controlled and robotic high-volume equipment (ideal but not essential) Solid experience maintaining and diagnosing faults in hydraulic and pneumatic systems Benefits - Maintenance Engineer Discretionary annual Bonus 7.5% up to 5.5% employer contribution EV Scheme: through salary sacrifice and free charging at site Medical Insurance Death in Service: 4 x annual salary For more information on this role, please contact Andy Haddon on (phone number removed), or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process

Development and Production Test Engineer - Electronic/Electrical Location: Bolton (fully onsite) Duration: 12 months Rate: £34-£37 p/h (Umbrella) IR35: Inside Clearance: SC (can start on BPSS) Overview We're currently seeking a Development and Production Test Engineer (Electronics/Electrical) to support testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You'll provide hands-on technical support to manufacturing test capability, helping ensure programme targets are achieved to agreed time, cost, and quality. Responsibilities: • Provide test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment Test and diagnose complex electrical/electronic systems, sub-assemblies and circuit cards down to component level Generate test specifications, operator instructions and technical reports (based on higher-level requirements and information) Identify remedial/corrective actions following production test failures to keep manufacturing running to plan Support meetings with Quality and Operations, providing status updates on actions and investigations Skillset/experience required: Essential: Minimum HNC (or equivalent) in an Engineering discipline Strong understanding of digital and analogue electronic measurement/test principles and fault diagnosis (down to component level) Awareness of electrical/electronic sub-system and system design, integration and test principles Good written/verbal communication (including producing test specs, operator instructions, technical reports) * Ability to plan and organise work to priorities Advantageous: Knowledge of RF and Microwave technology at sub-system level Experience operating manual and automated test equipment in an electronics manufacturing environment

Salary: Up to £25 per hour + Overtime Hours: 40 hours per week - daytime shifts, with flexibility The Role An exciting opportunity has arisen for an experienced PCV Engineer to join a busy Engineering Department and play a vital role in keeping a modern commercial vehicle fleet safe, reliable and operational. You'll be responsible for the inspection, servicing, maintenance and repair of PCV and HGV vehicles, ensuring all work is completed to a high standard and in line with current safety and regulatory requirements. This is an excellent opportunity for an engineer looking for stability, good working hours, paid overtime and genuine opportunities to develop their skills and qualifications. Key Responsibilities Carry out scheduled 6-weekly inspections and preventative maintenance Diagnose mechanical and electrical faults using modern diagnostic equipment Complete servicing, repairs and maintenance to PCV vehicles Identify faults efficiently and carry out effective repairs to minimise vehicle downtime Prepare vehicles for MOT and annual testing Ensure all vehicles meet required safety and regulatory standards Complete maintenance records, inspection sheets and other relevant documentation accurately Work safely and professionally at all times, maintaining high standards of workmanship Support the wider Engineering team to ensure the fleet remains operational and road-ready About You We're looking for an experienced and motivated engineer who takes pride in their work and understands the importance of vehicle safety and reliability. You'll ideally have: Relevant engineering qualifications or proven experience working on PCV or HGV vehicles Previous experience in commercial vehicle maintenance Strong mechanical fault-finding and diagnostic skills Good IT and administrative skills Excellent communication and teamwork skills A full UK driving licence A professional, reliable and safety-focused approach A willingness to obtain a PCV licence - training can be provided What's On Offer Competitive salary with attractive overtime rates 40-hour working week Predominantly daytime shifts Flexible working arrangements Paid weekend on-call rota following a qualifying period 28 days annual leave, increasing to up to 33 days with bonus holiday allowance IRTEC training and qualifications Ongoing technical training and upskilling Long-term career development opportunities A stable position within an established and growing engineering environment Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here. TPBN1_UKTJ

Quality Engineer (Automotive) Bolton Days Role £40,(Apply online only) - £45,(Apply online only) + Bonus About the Opportunity An exciting opportunity has arisen for an experienced Quality Engineer to join a global automotive technology manufacturer at its Bolton facility. Their focus on quality, continuous improvement, electrification and next-generation vehicle technologies makes this an excellent opportunity for a quality professional looking to develop their career within a highly technical manufacturing environment. Key Responsibilities - Quality Engineer (Automotive) Act as the primary customer interface for all quality-related issues. Manage line returns, warranty returns and customer complaints, ensuring robust corrective actions are implemented. Monitor, analyse and report quality KPI performance, driving continuous improvement initiatives. Support Quality Technicians with product investigations and testing activities. Develop and maintain quality procedures, work instructions and test specifications. Manage internal and external concession requests. Conduct supplier audits and support supplier quality improvement activities. Complete customer quality documentation including APQP, PPAP and related requirements. Analyse process capability and R&R data, working closely with Production Engineering to improve manufacturing performance. Ensure compliance with customer-specific requirements, IATF 16949 standards and internal quality systems. Experience/Qualifications - Quality Engineer (Automotive) HNC/HND qualified in Mechanical, Electrical or Manufacturing Engineering. Minimum 5 years' experience within a Quality Engineering position. Automotive manufacturing experience is preferred, although applications from high-volume electronics or assembly manufacturing environments are also welcome. Strong understanding of IATF 16949 and automotive quality tools. Experience with APQP, PPAP, FMEA, SPC, Control Plans, Process Flow Analysis, R&R Studies and structured problem-solving methodologies. Experience liaising directly with customers and suppliers on quality matters. Proficient with Microsoft Office applications, particularly Excel and Word. Excellent communication and stakeholder management skills. Benefits - Quality Engineer (Automotive) Discretionary Annual Bonus (7.5%) Up to 5.5% Employer Pension Contribution Electric Vehicle Scheme via Salary Sacrifice Free EV Charging On Site Private Medical Insurance Death in Service Cover (4x Annual Salary) For more information on this role, please contact Charlie Boulton on (phone number removed), or send an email to For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include : Quality Engineer, Senior Quality Engineer, Customer Quality Engineer, Supplier Quality Engineer, QA Engineer, Manufacturing Quality Engineer, Quality Assurance Engineer, Product Quality Engineer, APQP Engineer, Quality Systems Engineer, Automotive Quality Engineer, Continuous Improvement Engineer, Quality Specialist, Quality Lead, Process Quality Engineer. Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process

Maintenance Electrician Meridian are working with a well-established M&E contractor in the North-west who are growing their maintenance team. With a wide variety of work on commercial contracts in the area, there are plenty of additional earning possibilities as well as a strong benefits package. If you're looking for a stable and rewarding role as a Maintenance Electrician then this is perfect for you! Benefits include (but are not exclusive to): Starting salary £42k p.a Additional overtime, shifts, and weekends may be available depending on call-outs and projects Company Vehicle with additional fuel card Immediate start available (subject to successful application) Working on regionalised commercial projects across the North-west NEST Company pension scheme Sickness and Death in Service schemes 21-days holiday plus Bank Holidays, with additional holiday purchase scheme available Progression, upskilling, and trainingRequirements for this role: Qualified Electrician - Installation or Approved Electrician JIB Gold card 2391 or equivalent Inspection and Testing qualifications desirable but NOT essential Proven experience in commercial electrical maintenance Strong understanding of electrical systems, safety standards, and fault-finding Ability to work independently and as part of a team Excellent communication and customer service skills Good communication, teamwork, and customer service skills Full and valid UK Driving LicenceDuties include (but are not exclusive to): Diagnosing and repairing electrical faults Performing routine inspections and preventative maintenance Being available for a call-out rota when needed EICR Testing, Emergency Lighting Testing, distribution board servicing, power & lighting rip out and upgrades Installing, upgrading, and maintaining electrical equipment Responding to reactive maintenance requests Ensuring compliance with all electrical and safety regulations Working with onsite customers and clients to help diagnose and problem solve where requiredIf you are looking to join a growing maintenance team with increasing regionalised work, then please apply directly to the advert or email (url removed) for more information Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Agency for this vacancy

Commercial Property Solicitor | 2+ PQE | Manchester | Up to c£55,000 (DOE) | Join a Legal 500 law firm seeking to expand its prospering commercial property team offering career progression and hybrid working opportunities | To apply or to register your interest, please call Melanie Daly on 0161 850

Description for the User Researcher:-.This is a fantastic opportunity with an international management consulting company, who are looking to fill multiple.UK (Large scale digital transformation Projects in the Public Sector).This will be joining their exciting growing digital practice and will offe

For the past 25 years, ProPharma has improved the health and wellness of patients by providing advice and expertise that empowers biotech, med device, and pharmaceutical organizations of all sizes to confidently advance scientific breakthroughs and introduce new therapies.ProPharma partners with its

Safety Physician – Director Level.Global Development | Rare Disease & Neurology | UK.You are a medically trained safety leader who wants to move beyond execution and play a defining role in how development programmes are designed, challenged and advanced.You want to operate at the heart of clinica

Testing & Inspection experience. Experience in wider electrical background highly desirable. Electrical installation, maintenance, and repair on highways.

Active Training Team creates safer workplaces through award-winning immersive training.Combining live drama, film, realistic environments and skills coaching, our programmes are designed to change how people think, decide and behave in high-risk situations.We work in construction, utilities, transpo

Position : Security Engineering Authority.Location & Travel : Warwick / Wokingham / Corsham / Farnborough (Hybrid – vast majority of work is expected to be remote – however there may be occasional travel to customer sites).Clearance level required BPSS/SC/Other.Remote/Site/Hybrid – If not all

Private Client Solicitor | Surrey.Make your mark in a private client team that genuinely values quality, flexibility, and long-term relationships, not targets for the sake of it.Join a growing regional law firm where your expertise is recognised and your development is actively supported.You’ll jo

My client is a boutique employment firm offering a full range of employment-related legal services.This role is fully remote although you are welcome to attend the Northern offices for team days etc if you like.For more info, please apply within.

Commissioning Manager + Electrical Supervisor – £100m Super Prime Residential Project. Electrical Supervisor: £60k-£70k + bens. We are seeking an experienced and dedicated Commissioning Manager and an Electrical Supervisor to join a prestigious £100m super prime residential refurbishment proje

Packaging & Product Artworker (6-Month FTC, Remote).A fast-growing, profitable consumer brand group is looking for a Packaging & Product Artworker to join their Brand & Creative team on a 6-month fixed-term contract.This is a chance to own the technical artwork and production capability behind a rap

Engineering Supervisor - Corwen, Wales.Are you a Maintenance, Process or Chemical Engineer looking for a new challenge? Are you familiar with CMMS systems? Do you want to join a company with great opportunities for progression? Then this opportunity with an AgriChem manufacturer is looking for you!.

A leading Employee Benefits Consultancy is seeking an experienced.Client Service Delivery Operations Lead.Lead day‑to‑day operations across the Client Service Delivery function.Build strong relationships with Consulting leadership to ensure seamless client service.Oversee UK teams and internatio

Our client, a London-headquartered space-intelligence company is looking for a Technical Programme Manager to own delivery of its most technically demanding programmes.Our client builds the sovereign, AI-native space-intelligence capability that allied governments increasingly need as orbit becomes

An established multidisciplinary consultancy is looking to appoint a senior property professional to grow its Healthcare Property Advisory offering across the North of England and Midlands.This is a strategic, market-facing role for someone with strong experience advising NHS Trusts and healthcare o

This opportunity is for experienced.M&A, corporate governance, securities and capital markets, deal structuring, commercial contracts, and corporate restructuring.AI research and evaluation projects.You'll apply your legal expertise to design realistic corporate law scenarios, evaluate AI-generated

AJ Chambers is working with a regional, top 200 law firm in Chelmsford that is seeking a highly motivated and experienced Property Litigation Solicitor to join their well-established law firm.The ideal candidate will have a passion for property litigation and a desire to work in a fast-paced and cha

The Assistant Front Desk Manager supervises a front desk team that excels in delivering industry leading service to our guests.Responsible for motivating, coaching, training, evaluating and tracking development on an individual and team level.Plays a key role in leading a team of empowered individua

Tailored Clinical Research Solutions (www.UK-based, CRO are looking for an experienced CRA to join their close-knit team.This is a full-time, permanent, home-based position – salary will be dependent on experience.If you are interested please either send a DM or contact Peter MacLennan directly (p

D365 Business Central Functional Consultant.Outside IR35 | 6 months | £500-£650 per day | Remote (with occasional travel).Dynamics 365 Business Central implementations.Lead workshops to gather and define business requirements across finance and operations.Translate business needs into functional d

AI Tooling Governance & Adoption Manager.Hampshire | 1 or 2 days per week onsite | £70,000 - £80,000 + Benefits.AI is moving fast, but most organisations are still figuring out how to govern it effectively.This is an opportunity to take ownership of that challenge.You'll join a business that is in

The Business Affairs Manager is responsible for all business affairs matters arising from the Product, Design & Marketing group in EMEIA, including ensuring that any third-party content featured in our products, platforms and services is properly licensed or commissioned, and is brand- and region-ap

Established in 2000, Express Solicitors is an award winning, no win no fee law firm specialising exclusively in personal injury claims.Headquartered in Manchester, we support clients nationwide across all areas of personal injury, including employers’ liability, serious injury, clinical negligence

EnterTheLoop is building the UK's independent clinical evaluation layer: the UK-owned standard for testing whether AI used in healthcare is safe, accurate, and aligned with UK guidelines.

Head of Health and Safety - Distribution – Home Based with Travel – £70,000 - £85,000 + Benefits Package.Principal People is excited to be working exclusively with a leading distribution organisation to recruit a Head of Health and Safety.This is an outstanding opportunity for an experienced H

Scindo leverages AI-powered enzyme discovery and design to develop advanced biocatalysts that power the future of sustainable manufacturing.By transforming industrial chemistry with highly selective enzymes, Scindo unlocks novel synthesis routes that reduce energy use, waste generation, and dependen

Our client is a progressive firm of specialist solicitors renowned for its professional yet personal service that has been advising businesses and individuals.Ranked in the legal directories Chambers UK and The Legal 500 and hold many accreditations including Lexcel, Customer Service Excellence, Cyb

Senior Clinical Science Leader – Alzheimer’s Disease | Global Opportunity.Flexible / Remote options available depending on location.We are supporting a leading organisation at the forefront of advancing brain health and cognitive assessment technologies, who are seeking an experienced Senior Cli