Trabajos compliance engineer en BlackburnCrear alertas

Title: Senior Security Systems Design EngineerLocation: BlackburnJob Type: ContractLength: 12 months +Rate: £600-£650 per day INSIDE IR35Security Clearance required - can start on BPSS then moving to SCQualifications and training (typical)- HNC/HND/Degree in Electrical/Electronic Engineering (or demonstrable equivalentexperience).- Recognised electrical/safety training aligned to site requirements (varies by operator).- Vendor training/certification (beneficial): major VMS/ACS/IDS platforms used in the sector.- Security vetting/clearance: Enhanced BPSS & SC clearances required.Role purposeDesign, engineer and assure integrated electronic security systems (ESS) for Critical National Infrastructure (CNI) sites (e.g., energy, water, transport, telecoms, defence-related estates). The role ensures electronic & physical security solutions are safe, compliant, resilient, maintainable, and proportionate to assessed risk-often within high-assurance environments and under strict governance.Scope and typical systems- Access Control Systems (ACS): door controllers, credential technologies, biometrics, turnstiles, vehicle access.- Intruder Detection Systems (IDS): perimeter and internal detection, alarm routing, gradedsignalling.- Video Surveillance (CCTV/VSS): fixed/PTZ, analytics, storage, evidential export.- Perimeter security electronics: fence detection, radar, thermal, gates/barriers interfacing.- Intercom/help points, duress/panic alarms, lockdown/alerting functions.- Security management and integration platforms: PSIM, VMS, access control management, event correlation.- Alarm monitoring integration: SOC/ARC interfaces, incident response workflows.- Power and resilience: UPS, battery autonomy, dual feeds, segregation, surge protection,earthing/bonding.- Networked security infrastructure: structured cabling, fibre, PoE, network segmentation, time sync, secure remote access patterns (as governed).Key responsibilities1) Concept and requirements engineering- Translate security risk assessments, threat models and operational requirements into clearengineering requirements and performance specs.- Develop security design concepts (architecture options, resilience models, failure modes,coverage principles) aligned to the site's criticality.- Define interface requirements with OT/IT, building systems, fire systems and operationalprocesses.2) Detailed design and engineering delivery- Produce design packs: single line diagrams, schematics, panel designs, cable schedules, device layouts, containment requirements, integration interface documents, network topologies (asrequired).- Select appropriate technologies and grades of equipment aligned with environment, threat, maintainability and lifecycle cost.- Engineer power budgets, UPS autonomy, segregation, EMC considerations, and environmental suitability (IP ratings, temperature, corrosion).- Ensure designs support safe installation and maintainability (access for servicing, sparesstrategy, configuration control).3) Compliance, assurance and governance- Design in accordance with relevant standards, client governance and site rules (including safety, electrical, security and information assurance requirements).- Participate in design reviews, HAZID/HAZOP or equivalent safety/security assurance activities where applicable.- Maintain traceability: requirements ? design ? test ? as-built manage design change control.4) Cyber-physical security alignment- Work with cybersecurity/architecture teams to ensure secure-by-design principles fornetworked security systems (segmentation, hardening assumptions, credential management, logging, patching constraints).- Produce documentation to support risk acceptance and operational security processes (account management, secure maintenance, audit trails).5) Testing, commissioning and handover- Define test strategies: FAT/SAT, integrated testing, performance validation, resilience/failover tests, alarm response verification.- Support commissioning, resolve defects, verify as-built compliance, and produce handover documentation and training inputs.- Ensure operational readiness: SOPs input, maintenance regimes, spares, and configuration backups.6) Stakeholder and supplier management- Specify and evaluate supplier solutions review technical submissions, RFIs, deviations and value engineering proposals.- Provide technical support to procurement and contract teams (scope clarity, acceptance criteria, warranties, support arrangements).Deliverables- User/Operational Requirements (input or authored sections) and System RequirementsSpecification- Security System Architecture and integration/interface control documents (ICDs)- Drawings: GA/device layouts, wiring diagrams, schematics, cabinet layouts, network diagrams- Schedules: equipment lists, I/O schedules, cable schedules, power/UPS calculations- Test documentation: FAT/SAT scripts, test evidence requirements, commissioning plans- As-built pack, O&M manuals review, training materials input, configuration baselinesSkills and competenciesTechnical- Strong electrical engineering fundamentals: power distribution, protection, earthing/bonding, cable design, fault finding principles.- Solid understanding of physical security technologies (ACS, IDS, VSS, perimeter detection) and integration patterns.- Knowledge of resilience engineering (redundancy, autonomy, graceful degradation, failsecure/fail-safe behaviour).- Competence in drawings and engineering documentation control (CAD and documentmanagement practices).- Familiarity with networking concepts relevant to ESS (IP addressing, VLANs, PoE budgets,bandwidth/storage sizing, time synchronisation).Experience (typical)- 3-8+ years in security systems engineering/design or related building services/controls with significant ESS exposure.- Experience delivering projects through full lifecycle: concept to handover.- Experience working under strict governance (design gates, audits, regulated change control)and within live operational sites.TPBN1_UKTJ

The Opportunity \n This is a hands-on, field-based role covering the Northwest of England, with occasional travel further afield, and is central to how the business delivers high-quality on-site installations and support across its client base. \n The Role \n You'll be responsible for delivering professional on-site installations, maintenance and support services, with a strong focus on structured network cabling, IT infrastructure and telecoms systems. You'll work across a wide variety of customer sites — from small offices to larger commercial environments — often acting as the face of the business on-site. To succeed in this role, you'll need to be technically competent, well organised, and confident working independently while keeping clear communication with clients, suppliers and internal teams. \n What You'll Be Doing \n Installation & Field Work \n\n • Install, terminate and test structured cabling systems (Cat5e, Cat6, Cat6a, fibre where required)\n, • Install and configure IT and telecoms equipment, including desktop PCs, laptops, network switches, routers, Wi-Fi access points and VoIP systems\n, • Carry out full site installations, including cabinet/rack builds, patch panel terminations and cable management\n, • Conduct site surveys and provide recommendations for network and IT infrastructure improvements\n, • Ensure all installations meet industry standards and best practice, including health and safety compliance\n\n Technical Responsibilities \n\n • Diagnose and resolve on-site technical issues relating to IT, networking, connectivity and telecoms systems\n, • Assist with deployment and configuration of client infrastructure and telecoms systems\n, • Carry out testing and documentation of installed cabling and hardware\n, • Support project delivery for installations, upgrades and relocations\n, • Maintain accurate technical documentation and handover notes following each job\n\n Client Interaction & Service Delivery \n\n • Act as a professional and approachable point of contact on-site for clients\n, • Communicate clearly with clients regarding work being carried out, timelines and any issues encountered\n, • Ensure all work is completed within agreed timescales and to a high standard\n, • Provide post-installation guidance and basic user support where required\n, • Escalate complex issues to the support team when necessary\n\n Health, Safety & Compliance \n\n • Adhere to all health and safety requirements when working on-site\n, • Follow structured cabling standards and compliance requirements\n, • Ensure safe use of tools, ladders and access equipment\n, • Maintain a clean, organised and professional working environment at client sites\n\n Internal Collaboration \n\n • Work closely with the Service Desk and Project teams to ensure smooth job delivery\n, • Provide feedback from site visits to improve processes and service quality\n, • Contribute to internal documentation, including installation procedures and best practices\n, • Represent the business professionally at all times\n\n What We're Looking For \n\n • Strong technical understanding of cabling, IT and networking infrastructure\n, • Excellent problem-solving and fault-finding ability\n, • High attention to detail and quality of workmanship\n, • Good time management and ability to work independently\n, • Clear and confident communication skills\n, • Customer-focused approach with a professional manner\n\n Working Conditions \n\n • Field-based role covering the North West of England, with occasional travel further afield\n, • Regular travel to client sites, with early starts or extended days as required\n, • Occasional out-of-hours or weekend work for project-based installations or maintenance\n, • Physical work involved, including cabling, lifting equipment and working at height\n, • Additional duties carried out in the Blackburn office as required\n\n Desirable Experience \n\n • Previous experience in a field engineer and cabling role\n, • Experience within an MSP environment\n, • Solid technical knowledge across Windows desktop & server, networking (LAN/WAN, switches, routers, firewalls, Wi-Fi) and hosted telephony systems\n, • Exposure to cyber security solutions and best practice\n, • Full clean UK driving licence\n, • Clean DBS required\n\n \n

Senior Electrical Design Engineer – 12 month contract – Samlesbury Aerodrome, Lancashire - £47.12 ph UMB or £35 ph PAYE (Inside IR35) \n Please note that you will need to have recent experience using Catia V5 and indefinite leave to remain in the UK or a British nationality to apply for this role. \n The Role \n As a Senior Electrical Design Engineer you will be part of a team producing the physical product definition to satisfy a set of multidisciplinary system functional requirements, taking account of safety, cost, manufacturing, in-service support and other considerations. Your engineering capabilities will be developed across a range of design skills and product lifecycle stages, working both in a model-based and 2D drawing engineering environment centered on Catia V5. \n \n Typically your design capabilities will be developed using: \n The CATIA V5 Electrical 3D & 2D Design Toolset in the design installation of electrical equipment, routing of electrical harnesses, incorporating support structure and physical separation requirements, taking account of system performance, system safety, system redundancy as well as cost and through-life considerations. \n A key aspect of the roles is to demonstrate compliance with functional requirements, including zonal safety analysis in a collaborative multi-disciplinary team environment. \n \n Role Responsibilities: \n Not limited to... \n\n • Working closely with other engineering disciplines and functions, supplier and customer areas, fostering a team-working and collaborative product development environment.\n, • Producing and issuing Airframe engineering design data to meet project requirements, in line with design standards, whilst maintaining quality, cost and schedule adherence.\n, • Verifying design data prior to a formal independent check criteria to ensure compliance with project standards.\n, • Identifying project technical risks and opportunities, and where appropriate propose mitigation plans.\n, • Supporting all aspects of personal and professional development for yourself and, where appropriate, others in your team.\n, • Evaluating and resolving design queries, and supporting the generation of resulting modifications and changes.\n\n \n What are BAE Systems looking for from you? \n\n • Experience in an Electrical Design role\n, • Experience of operating in an electrical design role, or equivalent in one or more phases of the product lifecycle.\n, • Recent experience using Catia V5.\n\n Working pattern / hours \n\n • Typically 37 hours per week, Mon–Fri (site span hours apply; start/finish agreed with local management)\n, • 2–3 days per week on site at Samlesbury\n\n

Automation EngineerDaysDarwen£50,000 - £55,000An exciting opportunity has arisen for an experienced Automation Engineer to join a leading manufacturing business. This is a varied and hands-on role focused on delivering controls and instrumentation projects across a busy production environment.Responsibilities - Automation EngineerPlan, design and deliver automation and controls engineering projects from initial concept through to commissioning and handover.Develop and manage project plans, schedules, budgets and resource requirements.Program, modify and maintain PLC, HMI and SCADA systems to support manufacturing operations and improvement initiatives.Coordinate with internal stakeholders, contractors and suppliers to ensure project objectives are achieved.Conduct site surveys, inspections and progress reviews to ensure projects are delivered safely, on time and within budget.Prepare technical documentation, reports, specifications and project presentations.Support procurement activities, including specification reviews and supplier selection.Identify, assess and mitigate project risks throughout the project lifecycle.Ensure compliance with relevant industry standards, health & safety regulations and contractor management requirements.Provide technical support, coaching and mentorship to engineering colleagues.Drive continuous improvement and operational excellence initiatives across site automation systems.Experience / Qualifications - Automation EngineerBachelor's degree/HNC/HND in Electrical Engineering, Automation Engineering or a related engineering discipline.Previous experience as an Automation Engineer, Controls Engineer, Project Engineer or Improvement Engineer within a manufacturing or industrial environment.Strong knowledge of PLC, HMI, SCADA and instrumentation systems.Experience managing engineering projects from design through to implementation.Excellent understanding of engineering principles and project management methodologies.Proficient in engineering design tools and project management software.Strong communication, organisational and problem-solving skills.Ability to manage multiple priorities and deliver results in a fast-paced environment.Knowledge of health & safety legislation, industry standards and contractor management processes.Experience of continuous improvement, lean manufacturing or operational excellence programmes would be highly advantageous.Benefits - Automation EngineerPension Scheme with company contributions of up to 10%Free BUPA healthcare cover with the option to add family membersDental and optical healthcare programmeLife assurance at 4x annual salaryEmployee Assistance Programme and wellbeing servicesDiscounts platform offering savings across supermarkets, retail and hospitalityChristmas shutdown between Christmas and New YearChristmas Savings SchemeFree secure on-site parkingCanteen facilities25 days holiday plus bank holidaysOption to buy or sell up to 5 days annual leaveOnline Health & Safety and Business Compliance trainingFull PPE provided, including safety boots and spectaclesProfit share scheme and performance-related bonusesLong service awards and incentive programmesOn-site Occupational Health TherapistPhysical and mental wellbeing initiatives, including company fitness activitiesOngoing external training and development opportunitiesCompany social events and contributed Christmas partiesFor more information on this role, please contact Andy Haddon on 01453 796617, or send a copy of your CV toFor details of other opportunities available within your chosen field, please visitOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.Ideal background / Previous roles may include : Controls Engineer, Automation Engineer, PLC/SCADA Engineer, EC&I Engineer, Electrical Controls Engineer, Control Systems Engineer, or Project Engineer within a manufacturing or industrial environment.Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process.TPBN1_UKTJ

We are seeking a Process Safety Engineer to play a pivotal role in ensuring compliance while driving a culture of commitment-based process safety. This dynamic position involves managing Process Safety Management (PSM) processes, influencing HSE policies, and implementing improvement initiatives. The role is crucial to achieving organisational and regulatory safety objectives. Key Responsibilities \n\n • D...\n\n \n \n ZIPC1_UKTJ

This is a brilliant opportunity for a Project Engineer to further their career with a well-known manufacturing business based in Blackburn, focusing on NPI Project delivery.A leading manufacturing organisation in Blackburn is recruiting for an NPI Project Engineer to play a pivotal role in the developmental phases of new projects. This position offers an exciting opportunity for you to coordinate cross-functional engineering activities, champion Agile project management practices, and ensure seamless alignment across teams. With a competitive salary range of £45,000 to £50,000 p/a plus bonus and other benefits, this full-time role provides stability and growth within a supportive environment. You will enjoy flexible working opportunities, generous pension contributions, and access to ongoing training that empowers your professional development.What you'll do:As a New Product Introduction Project Engineer, you will be at the heart of advancing new products through their developmental stages. Your day-to-day responsibilities will involve:Coordinating all development-phase activities required to advance new products through the NPI process, maintaining alignment with company standards.Lead Agile ceremonies such as sprint planning, backlog refinement, daily stand-ups, and retrospectives to promote best practices and CI.Maintain and prioritise the development backlog by clearly defining tasks, sequencing them according to project objectives, and tracking progress against milestones.Monitor sprint progress closely, identify risks or delays early on, escalate issues appropriately, and ensure timely delivery of development milestones.Serve as the central point of co-ordination for engineering tasks during each sprint cycle, facilitating clear communication of updates to stakeholders across departments.Support prototype and sample production by ensuring all development deliverables, documentation, and updates are complete, accurate, and approved before handover.Define and execute validation plans including SOPs, ITPs, PFMEAs, Control Plans and Risk Assessments to guarantee compliance with customer requirements and regulatory standards.Drive root-cause analysis and corrective actions for any issues identified during prototype or sample production phases to maintain high quality standards.Utilise PLM systems, ERP tools, MS Project/Planner and Lean manufacturing principles to enhance efficiency and predictability in engineering delivery.What you bring:To excel as a NPI Project Engineer, you'll bring substantial experience gained from working on complex projects within a manufacturing or engineering environment. Key areas of applications that will be reviewed and discussed at interview stage are:Strong understanding of Agile frameworks such as Scrum or Kanban, with demonstrable experience applying these methodologies in engineering settings.Excellent problem-solving abilities coupled with the capacity to navigate ambiguity effectively when faced with complex challenges.Outstanding communication skills enabling you to manage stakeholder relationships while providing clear progress updates.Degree in Mechanical Engineering, Manufacturing Engineering or related discipline is preferred but not mandatory if equivalent experience can be demonstrated.Certification in Agile or Scrum methodologies would be advantageous for candidates looking to further their expertise in project management practices.Experience using PLM systems, MS Project/Planner and familiarity with ERP tools.Knowledge of Lean manufacturing principles along with CI methodologies.Ability to interpret engineering drawings accurately to ensure technical inputs meet required standards throughout development phases.What's next:If you are ready to take the next step in your career by joining a supportive team where your expertise will make a difference, please apply today by clicking on the link provided below. Alternatively, contact Jon Armstrong at Robert Walters UK.Robert Walters Operations Limited is an employment business and employment agency and welcomes applications from all candidatesTPBN1_UKTJ

At United Utilities, we are transforming how wastewater systems are managed by putting insight and foresight at the centre of every decision. Dynamic Network Monitoring (DNM) and our evolving Dynamic Treatment Management (DTM) capability are key to this transformation, providing a real-time, data-driven view across our networks and treatment works and enabling smarter, end-to-end operational control.As part of an expanding Operational Intelligence team in Blackburn, we are looking for a DNM Performance Engineer who is driven to use data to stay ahead of issues, not react to them. Reporting to the DNM Optimisation Manager, this is a newly created role driven by growth, offering the chance to shape smarter, more proactive operations.You will work alongside a small team of DNM Performance Engineers, each responsible for a defined geographical area, and partner closely with highly experienced network maintenance and treatment maintenance teams. Together, you will turn data into insight and insight into action, contributing to a more predictive, whole-system approach to performance across both networks and treatment.Job PurposeAs a DNM Performance Engineer, you will act as the custodian of alert logic across our wastewater network and treatment works within the DNM framework. Your focus is not just on generating alerts but truly understanding them.This role is about deciphering what alerts are telling us, breaking down complex data into clear meaning, and defining how the business should respond. You will ensure that alerts translate into the right actions at the right time, enabling teams to intervene early and prevent issues before consequences occur.By combining continuous monitoring, performance trends and operational knowledge, you will improve alert quality so that it drives confident decision making. Your work will directly reduce service failures, minimise pollution risk and strengthen operational resilience across both network and treatment assets.Alongside DNM, you will play a key role in supporting the development of Dynamic Treatment Management, helping to extend data-led decision making into treatment processes and ensuring a joined-up, whole-system approach to performance optimisation.You will also embed strong performance management processes so that alerts consistently deliver value, supporting a shift from reactive response to proactive and predictive management.Accountabilities and ResponsibilitiesAlert performance, assurance and governance:Own and optimise DNM alert logic so signals are clear, meaningful and drive the right operational responseEstablish governance frameworks that ensure alerts are consistent, reliable and aligned with operational prioritiesDynamic Treatment Management development:Support the development and embedding of Dynamic Treatment Management capabilities, ensuring alignment with DNM principlesUse data and operational insight to improve treatment performance, optimise process control and reduce risk across treatment worksContribute to a whole-system view, linking network and treatment performance to drive better operational outcomesContinuous improvement and future development:Use data and insight to continuously improve how alerts are interpreted and how responses are definedIdentify opportunities to enhance DNM and DTM capability and strengthen predictive performanceData quality and systems ownership:Champion data accuracy and integrity to ensure decisions are based on trusted informationMaintain ownership of DNM systems to maximise their effectiveness and operational impactStakeholder engagement and technical leadership:Work closely with network maintenance and treatment maintenance teams to translate alerts into practical, timely actionProvide technical leadership that breaks down complex data into clear insight and influences consistent responsesIncident, reporting and regulatory support:Use DNM and DTM insight to strengthen incident understanding and improve how events are managedSupport reporting and regulatory compliance through clear, data-led analysis and interpretationTechnical Skills and ExperienceHNC in civil or process engineering, or significant hands-on experience within wastewater network or treatment operations, with strong knowledge of day-to-day maintenance and operational practicesExperience within wastewater or wastewater treatment environments is highly desirableStrong problem-solving capability with confident use of IT systems and a good understanding of how they support operational performanceExcellent communication and influencing skills, with the ability to translate complex data into clear, meaningful insight for both technical and non-technical audiencesHighly developed analytical skills with the ability to interpret, break down and present data in a way that drives understanding and actionWhy This RoleThis is a role for someone who enjoys making sense of complexity and turning it into clear, confident action. You will play a pivotal role in how United Utilities interprets data, responds to risk and prevents problems before they happen.Working with experienced operational teams and a focused group of DNM specialists, you will be at the centre of a shift towards predictive, whole-system performance across both networks and treatment, supporting the development of Dynamic Treatment Management alongside DNM.Your ability to analyse, interpret and communicate data will directly influence decision-making across the business.Benefits26 days annual leave rising to 30 with service, plus bank holidaysCompetitive pension with up to 14% employer contribution and life coverPerformance related bonus of up to 7.5% plus recognition awardsCompany funded healthcare plan and wellbeing support including mental health resources and Employee Assistance ProgrammeAccess to discounts, gym savings and flexible benefits through MORE ChoicesFinancial wellbeing support including Salary Finance and Wealth at WorkElectric vehicle scheme and ShareBuy optionsEnhanced parental leaveIf you are someone who can see beyond the numbers, explain what they mean and guide others to act on them, this is your opportunity to make a meaningful and lasting impact.

Commercial Gas Engineer £38k-£45k doe About us Established in 1999, my client are an expanding commercial and industrial building services and maintenance company with a group turnover approaching £11 million. With over 50 employees, secured framework contracts and continued growth, they are now in a position where we find ourselves requiring an additional Commercial Gas Engineer with experience and relevant qualifications covering Lancashire and Greater Manchester areas. About You Experience conducting diagnostic, service and maintenance. Basic installations to commercial plant, HVAC and mechanical building services. Able to carry out fault finding and repair of commercial plant room equipment, i.e.boilers, pumps, valves, vessels etc. Conduct gas servicing in accordance with manufacturers/industry guidelines. Proficient with boilers, pumps, valves AHU’S, fan coils, pipework, burners, controls etc. Achieve first-time fix targets and minimise return visits Complete digital job reports and compliance documentation Oil qualification (OFTEC) would be desirable but not essential LPG qualification would be desirable but not essential Ground/Air source heat pumps/systems experience preferred but not essential Electrical/Controls (BMS) knowledge would be an advantage. * You would be working within facilities such as commercial, corporate, industrial, retail and governmental (Sc...

We are seeking a Process Safety Engineer to play a pivotal role in ensuring compliance while driving a culture of commitment-based process safety. Requirements: Proven experience as a Process Safety Engineer Experience with HAZIDs, HAZOPs, Risk assessments, Management of Change (MoC), Root Cause An

Senior Mechanical Design Engineer Would you like to be part of Vital Energis Strategy of Growth? Due to our ongoing growth, we are looking for a number of Senior Mechanical Design Engineers to join our growing teams based in our Blackburn, Glasgow and London offices. We are currently looking for: Intermediate Design Engineers Senior Design Engineers Principal Design Engineers About the role As part of the Engineering Design team you will be involved in producing a broad range of conceptual to fully detailed designs covering things such as District and Communal Heating Systems, Energy Centres, Trigeneration Solutions and Heat Pumps Due to the nature of the role you will be involved in projects at a variety of stages and locations utilising a range of technologies requiring initial conceptual work, site investigations, surveys, client meetings, project submissions and presentations. The Company Vital Energi is a leading provider of renewable energy infrastructure and systems to the public and private sectors. We are supporting Hospitals, Universities, New Build developments, Towns and Cities as well as Industrial and Commercial clients to decarbonise their buildings. We have and continue to work on ground-breaking projects throughout the UK which are supporting the UKs Net Zero targets, such as the recently announced £1 billion low-carbon infrastructure project for Westminster. With plans to double our headcount over the coming years, supported by offices opening in new locations across the country and our strong investment pipeline, coupled with our expansion into new markets such as industrial power generation with our very own Energy-from-Waste facility, there is no better time to join the family here at Vital Energi. Keyresponsibilities Supporting the design of distributed energy schemes, energy centres, district heating networks and other major projects Interpreting, appraising and documenting client requirements Carrying out calculations, equipment selection and process operation Producing schematics and detailed drawings Maintaining an awareness of cost implications within the design process Dealing with design issues and minimising their impact Ensuring compliance with CDM requirements and in-house processes Conducting HAZOP studies and Risk Assessments Assisting in specifying mechanical aspects for tendering works What you will need E ducated to at least HNC/HND level in Mechanical, Building Services or similar Engineering discipline Have at least 3+ years of relevant experience Design experience in at least one of the following fields: Building Services, CHP, Boilers/Heating, HVAC, Steam, Air Handling, Cooling, Renewable Energy (e.g Solar or Heat Pumps), or similar Proficient in AutoCAD Full UK manual driving licence The Package: S alary negotiable DOE Car Allowance Contributory Company Pension Scheme Non-contributory death-in-service insurance Employee Assistance Programme 25 Days Holiday plus 8 days bank holidays. Additional holidays awarded in line with length of service Option to purchase/sell additional holidays Onsite gym/wellbeing centre at our Blackburn Head Office Discounted gym membership across the UK EV charging points where possible Applications will be processed within 28 days of receipt. If you have not heard from us within this time period it will mean that your application has unfortunately been unsuccessful. The company is opposed to all forms of discrimination and will select for employment, training and promotion on the basis of suitability for the job and/ or merit. It is company policy that no job applicant or employee receives less favourable treatment than another on the grounds of sex, race, colour, age, ethnic or national origins, political affiliations, religious beliefs, marital status, physical disability or is disadvantaged by unjustifiable conditions or requirements. Applicants must have the unrestricted and ongoing right to work in the UK for the duration of employment, without the need for sponsorship . Due to the nature of this role, we are unable to support visa sponsorship or employ individuals with time-limited permission or conditions attached to their right to work in the UK Notice to Agency and Search Firm Representatives: V ital Energi Utilities Ltd is not accepting unsolicited CVs from agencies and/or search firms for this job posting. CVs submitted to any Vital Energi Utilities Ltd employee by a third party agency and/or search firm without a valid written & signed search agreement, will become the sole property of Vital Energi Utilities Ltd. No fee will be paid if a candidate is hired for this position as a result of an unsolicited agency or search firm referral. Thank you TPBN1_UKTJ

About The Role Join HomeServe as a Gas Repair Engineer and play a vital role in keeping our customers' homes running smoothly. • Location: Blackburn • Salary: £46,250 + £1,500 guaranteed bonus in your first year • Hours: You will average 40 hours per week (annualised hours - shorter hours in summer, longer in winter, with consistent pay). Includes evenings, weekends and bank holidays. What you'll be doing As a Gas Repair Engineer, you'll be working in customers' homes diagnosing and repairing gas appliances and heating systems. Your day-to-day will include: • Diagnosing faults on boilers and central heating systems • Carrying out repairs to restore heating and hot water • Carrying out boiler services • Completing safety checks and ensuring compliance with regulations • Managing jobs independently while delivering excellent customer service • Representing HomeServe in customers' homes with professionalism and care This is a field-based role where no two days are the same, giving you variety and autonomy in your work. What you'll get HomeServe offers a competitive package designed to support you both at work and at home: • £46,250 + £1,500 guaranteed bonus (year one) • Paid overtime opportunities • Pension scheme with income protection • 33 days holiday (buy/sell options) • Company van & fuel card • All tools, uniform & PPE provided • Access to industry-leading training & ongoing development • Free HomeServe Cover 8 policy • Smart tech salary sacrifice (Ikea/Currys) About You What we're looking for • Valid gas qualifications: CCN1, CENWAT1, HTR1, & CKR1 • Experience repairing gas appliances and central heating systems • Full UK driving licence (max 6 penalty points) • Strong customer service skills • Ability to work independently and solve problems on site • A positive, proactive approach to your work Training and support We'll give you everything you need to succeed from day one: • Week 1: Classroom-based induction Monday to Friday at our Walsall Head Office • Week 2: On-the-job training alongside an experienced HomeServe Gas Repair Engineer (Where required, we will pay for your accommodation and meal allowance for your induction). Why join HomeServe? At HomeServe you'll be part of an open, engaged culture where everyone has an equal voice and the opportunity to get involved, as well as make a real difference in our customers' lives. You'll work in a fun, friendly and inclusive environment where people understand the value of their contribution to our goals and are encouraged to recognise a job well done. We give you the tools, training, and support to do your job well and take pride in helping customers when they need it most. Ready to build a rewarding career with HomeServe? Apply today and take the next step with us. About Us HomeServe has got over 30 years' experience taking care of the nation's homes. From home emergency cover to one-off repairs, we're here 24/7. Whether it's plumbing, drainage, heating or electrics, our home experts are ready to get the job done. TPBN1_UKTJ

ES Recruit is seeking a Process Safety Engineer to drive compliance and foster a commitment-based safety culture in our Blackburn site. You will manage Process Safety Management (PSM), influence HSE policies, coach line management, and lead improvement initiatives with cross‑functional teams.

Senior Electrical Design Engineer responsible for physical product definition, electrical equipment design, harness routing, and compliance with functional requirements in a multidisciplinary environment.

We're hiring a qualified Gas Engineer, offering a company van and consistent work within your Community. Places for People is one of the UK's largest housing providers and is proud to be recognised as one of the UK's Top 50 Best Workplaces. We are committed to creating inclusive Communities and improving Customers' lives. You'll be working locally, making a real difference to People's homes and the neighbourhoods we operate in. What you'll get Use of a company vanwith fuel card 35 days annual leave (including bank holidays)with options to buy and sell leave Overtimeopportunities available Coreworking hours of 08:00-16:30 Monday-Friday Tools, uniform, iPad, mobile phone and PPE provided Pensionwith matched contributions up to 7% Permanent, secure employment Consistent workloadwithin your dedicated area A bonus scheme for all Colleagues at up to 2% Death in Service benefit Sick pay What you'll be doing Carrying outgas servicing, maintenance and installation across domestic properties Working in line with gas safety regulations and health and safety standards Participating in an on call rota when required Managing van stock to maximise first time fix rates Collaborating with teams to meet service targets Recordingwork activity and compliance documentation What your day looks like A structured schedule covering servicing, maintenance andinstallation work Travelling between jobs inyour company van Working independently or with a team of other tradespeople Engaging directlywith Customers in their homes Completingwork efficiently while maintaining compliance and safety standards Where you'llwork You will beworking across: Occupied homes Empty (void) properties A range of domestic propertieswithin your local area Environments involvingvulnerable Customers EssentialCriteria (you need to meet all of these to be shortlisted) ACSgas qualifications and Gas Safe registration Experienceworking as a Gas Engineer, ideally within social housing or domestic properties Full UK driving licence Due to the area this patch covers, you will need to be basedwithin the PR postcode Nice to have (not essential) Experienceworking to service KPIs Strong fault finding skills Our hiring process We're moving quickly and aim to interview as soon as possible for suitable candidates. If successful, when you join us you'll start an induction programme, which covers our systems, how we do things here and anything else you'll need to know. Important information This role will require a Basic DBS check You may be required to work across surrounding areas Ready to apply? If you want to support customers in your local community, this could be the right role for you. If you're looking for a stable role with consistent work, strong benefits, and the opportunity to make a real impact locally, we'd welcome your application. What`s next? If you meet the criteria and are ready to make the next step in your career then apply following our simple 5 minute application process, upload a CV and a supporting statement which demonstrates how you meet the requirements of the role. If you have any questions please email the recruitment team If you are a Places for People customer and you're looking for support with your application, please contact our skills and employment team on . Please note that we may bring the closing date forward, if we receive a large number of quality applications. If you are interested in this role we would advise applying immediately to avoid disappointment. If you are using a mobile device such as an iPad then ensure your CV is stored in the cloud, we currently support Google Drive, OneDrive and Dropbox. If you are a recruitment agency please note we operate a PSL and do not take cold calls. Safeguarding At Places for People, safeguarding is everyone's responsibility. We are committed to creating safe communities for our customers and colleagues by protecting children, young people, and adults at risk from harm, abuse, and neglect. We follow robust safeguarding policies and procedures, ensuring all employees, volunteers, and contractors uphold the highest standards of safeguarding and accountability. Our recruitment process includes pre-employment checks, including Disclosure and Barring Service (DBS) checks where applicable, to promote a safe and secure working environment. By joining Places for People, you are expected to contribute to our safeguarding culture, following our policies and reporting concerns to protect those in our communities. TPBN1_UKTJ

This is a compliance role on an engineering team. You are the engineer who makes it work in practice: implementing and evidencing controls, keeping the GRC platform accurate, preparing what auditors and customers ask for, and chasing the details that decide whether an audit goes well. Support audito

Key Integrated Services (Maintenance) Limited seeks a skilled Gas Engineer to maintain and repair gas systems across diverse sites. The role focuses on safety compliance, dampening systems and undertaking PPM tasks with hands-on plumbing experience.

We are looking for an MEP Project Manager / Clerk of Works / Compliance Engineer with a strong Mechanical and/or Electrical Building Services background to join a specialist healthcare compliance consultancy operating across the North West. MEP Project Manager / Clerk of Works / Compliance Engineer.

A leading environmental services provider in the UK seeks a Water Hygiene Engineer based in Reading. Ideal applicants will have 1–2 years of relevant experience and strong knowledge of water hygiene compliance, particularly Legionella Risk Assessments.

Employment Solutions Ltd is seeking a Process Safety Engineer to play a pivotal role in ensuring compliance while driving a culture of commitment-based process safety.

Ryanair is seeking a Heavy Maintenance Technical Standards & Compliance Engineer to join the Stansted team. Based at Stansted, you will review supplier performance, drive improvements, and ensure compliance with EASA CAMO/Part 145. The ideal candidate has heavy maintenance experience, an engineering

Kier Group is seeking a Section Engineer to join our United Utilities Framework in the North West of England. The role requires a civil engineering degree, understanding of consents and logistics, commercial awareness, and experience in people and project management.

Hager Group in Telford, West Midlands, is seeking a Health, Safety and Environmental Engineer (M/F/D) for a permanent role.

PTSG Electrical Safety Division is seeking an Electrician (Remedials Specialist) to perform remedial repairs and compliance work across commercial and industrial sites.

Westinghouse Electric Company in the UK is seeking an EC&I Engineer based at Westlakes to lead EC&I design deliverables on nuclear projects, reporting to the Manager, Electrical, Control, and I&C Integration.

Amazon Data Services UK Limited in London seeks an experienced Regional Environmental Engineer to oversee compliance, permitting, and environmental programs for AWS data centers. You will collaborate with engineering, construction, and operations teams to ensure regulatory adherence and sustainable

HSL Compliance is one of the UK’s leading compliance specialists, helping organisations keep people safe. At Urmson (part of the HSL Compliance Group), we don’t just install systems; we ensure they perform exactly as designed. As a Commissioning Engineer, you are the face of the company and the

A leading recruitment firm in the UK is seeking a Civil Field Engineer to oversee civil activities on an energy infrastructure project. You will ensure compliance with National Grid specifications and manage quality control on site. The ideal candidate is qualified in civil engineering with strong k

Heavy Maintenance Technical Standards & Compliance Engineer. Ryanair is looking for a highly skilled and experienced airline professional to work in a highly varied and dynamic environment within engineering. Play a critical role in shaping and elevating the company's engineering practices.

United Living is looking for a Lead Gas Engineer to oversee gas servicing, maintenance, and installation works in social housing properties across the United Kingdom. The role includes supervising a team, ensuring compliance with safety regulations, and managing the effective delivery of services. T

Ryanair is seeking a Heavy Maintenance Technical Standards & Compliance Engineer to operate on-site at Stansted. The role involves evaluating technical standards, driving improvements, and ensuring compliance with EASA CAMO and Part 145, while maintaining Ryanair’s safety and quality commitments.

A leading compliance specialist company in the UK seeks qualified Electrical Test Engineers to join their dynamic team. This unique opportunity focuses on ensuring client safety and compliance within electrical systems, emphasizing a supportive and team-oriented culture.

VennGroup is seeking an Electrical Technical Interface Engineer to bridge design and operations on a Hospital Programme in the UK.

A leading compliance software company is seeking a developer to join their Product Team.

Severn Trent Water is seeking a Statutory Compliance Project Engineer to lead compliance programmes across multiple sites, including lifting equipment, pressure systems and LEV. A strong background in statutory compliance, risk management and project delivery is essential, along.

HSL Compliance, through its Urmson division, is hiring an HVAC Commissioning Engineer for Chorley with travel across the region.

National Nuclear Laboratory Limited in the UK seeks an Area Engineer to assure safe maintenance and regulatory compliance across plant facilities. You will report to the Engineering Manager and liaise with Design on changes, review test procedures, and monitor asset care.

ALTEN is a global engineering and technology consultancy seeking a Mechanical Project Engineer to support pressure systems compliance and structural integrity on a major engineering programme. You will coordinate between engineering teams, suppliers, regulators, and stakeholders to ensure ongoing co

Intertek in the United Kingdom is seeking a Certification Engineer who will have strong analytical skills and support certification decisions for electrical products. The ideal candidate will have a degree in electrical engineering and experience in testing and certification, particularly with IEC 6

Morson Human Resources Limited is looking for a Project Quality Control Engineer in the UK. The role involves undertaking inspection activities, reviewing quality plans, and ensuring compliance with project standards.

EDSB Compliance Solutions are national providers of Fire & Security, Electrical, Mechanical and Building Services. From Design and Specification through to Installation and Maintenance, our focus is to deliver compliance, alongside an unbeatable level of service.

PHS Compliance self-delivers electrical test and inspection, M&E installation & maintenance & asset verification with over 400 engineers based nationwide. Our businesses include Washrooms, Healthcare, Floorcare, phs Direct and Direct365, phs Greenleaf, Teacrate, Besafe, Wastekit and Compliance. Elec

Would you like to be part of a distinct well established manufacturing company, steeped in a rich history?.This is a traditional manufacturing company, who produce genuinely unique and fascinating products.A very stable environment, your long- term prospects would be very healthy.Commutable from: -

Seeking a Senior Compliance Engineer to ensure medical equipment meets safety and legislative standards through testing and documentation.

The Emissions Compliance Engineer will ensure products meet global emissions regulations, working with international teams and developing compliance processes.

Experienced Electrical Test and Inspection Engineer needed for a leading company.

Seeking a Senior Compliance Engineer in the Medical Equipment sector for a market-leading company, with opportunities for career growth and training.

Work within the Councils estate of buildings undertaking cleaning duties as directed by line manager in accordance with the practices and procedures of the service.We are keen to employ a diverse workforce that reflects the people of Scotland.We welcome applications from all backgrounds and particul