Trabajos commissioning en BlackburnCrear alertas

Title: Senior Security Systems Design EngineerLocation: BlackburnJob Type: ContractLength: 12 months +Rate: £600-£650 per day INSIDE IR35Security Clearance required - can start on BPSS then moving to SCQualifications and training (typical)- HNC/HND/Degree in Electrical/Electronic Engineering (or demonstrable equivalentexperience).- Recognised electrical/safety training aligned to site requirements (varies by operator).- Vendor training/certification (beneficial): major VMS/ACS/IDS platforms used in the sector.- Security vetting/clearance: Enhanced BPSS & SC clearances required.Role purposeDesign, engineer and assure integrated electronic security systems (ESS) for Critical National Infrastructure (CNI) sites (e.g., energy, water, transport, telecoms, defence-related estates). The role ensures electronic & physical security solutions are safe, compliant, resilient, maintainable, and proportionate to assessed risk-often within high-assurance environments and under strict governance.Scope and typical systems- Access Control Systems (ACS): door controllers, credential technologies, biometrics, turnstiles, vehicle access.- Intruder Detection Systems (IDS): perimeter and internal detection, alarm routing, gradedsignalling.- Video Surveillance (CCTV/VSS): fixed/PTZ, analytics, storage, evidential export.- Perimeter security electronics: fence detection, radar, thermal, gates/barriers interfacing.- Intercom/help points, duress/panic alarms, lockdown/alerting functions.- Security management and integration platforms: PSIM, VMS, access control management, event correlation.- Alarm monitoring integration: SOC/ARC interfaces, incident response workflows.- Power and resilience: UPS, battery autonomy, dual feeds, segregation, surge protection,earthing/bonding.- Networked security infrastructure: structured cabling, fibre, PoE, network segmentation, time sync, secure remote access patterns (as governed).Key responsibilities1) Concept and requirements engineering- Translate security risk assessments, threat models and operational requirements into clearengineering requirements and performance specs.- Develop security design concepts (architecture options, resilience models, failure modes,coverage principles) aligned to the site's criticality.- Define interface requirements with OT/IT, building systems, fire systems and operationalprocesses.2) Detailed design and engineering delivery- Produce design packs: single line diagrams, schematics, panel designs, cable schedules, device layouts, containment requirements, integration interface documents, network topologies (asrequired).- Select appropriate technologies and grades of equipment aligned with environment, threat, maintainability and lifecycle cost.- Engineer power budgets, UPS autonomy, segregation, EMC considerations, and environmental suitability (IP ratings, temperature, corrosion).- Ensure designs support safe installation and maintainability (access for servicing, sparesstrategy, configuration control).3) Compliance, assurance and governance- Design in accordance with relevant standards, client governance and site rules (including safety, electrical, security and information assurance requirements).- Participate in design reviews, HAZID/HAZOP or equivalent safety/security assurance activities where applicable.- Maintain traceability: requirements ? design ? test ? as-built manage design change control.4) Cyber-physical security alignment- Work with cybersecurity/architecture teams to ensure secure-by-design principles fornetworked security systems (segmentation, hardening assumptions, credential management, logging, patching constraints).- Produce documentation to support risk acceptance and operational security processes (account management, secure maintenance, audit trails).5) Testing, commissioning and handover- Define test strategies: FAT/SAT, integrated testing, performance validation, resilience/failover tests, alarm response verification.- Support commissioning, resolve defects, verify as-built compliance, and produce handover documentation and training inputs.- Ensure operational readiness: SOPs input, maintenance regimes, spares, and configuration backups.6) Stakeholder and supplier management- Specify and evaluate supplier solutions review technical submissions, RFIs, deviations and value engineering proposals.- Provide technical support to procurement and contract teams (scope clarity, acceptance criteria, warranties, support arrangements).Deliverables- User/Operational Requirements (input or authored sections) and System RequirementsSpecification- Security System Architecture and integration/interface control documents (ICDs)- Drawings: GA/device layouts, wiring diagrams, schematics, cabinet layouts, network diagrams- Schedules: equipment lists, I/O schedules, cable schedules, power/UPS calculations- Test documentation: FAT/SAT scripts, test evidence requirements, commissioning plans- As-built pack, O&M manuals review, training materials input, configuration baselinesSkills and competenciesTechnical- Strong electrical engineering fundamentals: power distribution, protection, earthing/bonding, cable design, fault finding principles.- Solid understanding of physical security technologies (ACS, IDS, VSS, perimeter detection) and integration patterns.- Knowledge of resilience engineering (redundancy, autonomy, graceful degradation, failsecure/fail-safe behaviour).- Competence in drawings and engineering documentation control (CAD and documentmanagement practices).- Familiarity with networking concepts relevant to ESS (IP addressing, VLANs, PoE budgets,bandwidth/storage sizing, time synchronisation).Experience (typical)- 3-8+ years in security systems engineering/design or related building services/controls with significant ESS exposure.- Experience delivering projects through full lifecycle: concept to handover.- Experience working under strict governance (design gates, audits, regulated change control)and within live operational sites.TPBN1_UKTJ

We have a fantastic opportunity for an experienced Project Design Engineer to join a specialist engineering business designing and manufacturing industrial ovens, dryers and thermal processing systems for customers across a range of industries. This role will support projects from concept through to commissioning, developing bespoke engineering solutions and ensuring designs meet performance, safe... \n \n ZIPC1_UKTJ

Maintenance Fitter (Industrial Machinery) \n £32,000 - £35,000 + 4 Day Work Week + Early Thursday Finish + On-Site Parking + Overtime + Progression \n Blackburn \n Are you a Maintenance Fitter with a mechanical background, looking to join a growing manufacturer where you will work on bespoke industrial machinery across a variety of customer sites? \n On offer is the opportunity to join a well-established industrial machinery manufacturer, specialising in conveyor systems and hydraulic press out machines. Based in Balckburn, the company has almost 40 years of experience designing, manufacturing, installing and servicing bespoke machinery. \n Your role will involve carrying out site-based installation, commissioning, servicing and maintenance of industrial machinery and equipment. \n You will work on a variety of mechanical systems including pumps, gearboxes and motors, diagnosing breakdowns and carrying out repairs to ensure equipment is operating safely and efficiently. \n This role would suit a Maintenance Fitter or Mechanical Fitter, with experience working with pumps and motors. \n \n The Role \n\n • Carry out installation and commissioning of new industrial machinery and equipment\n, • Undertake planned maintenance, servicing and repairs on customer sites\n, • Diagnose and repair mechanical breakdowns\n, • Monday to Wednesday, 7:30am - 5:45pm; Thursday, 7:30am - 4:45pm\n\n \n The Person \n\n • Experience working as a Mechanical or Maintenance Fitter\n, • Full UK driving license\n\n \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n \n Reference Number: BBBH26842 \n \n Keywords: Mechanical Fitter, Maintenance Fitter, Mechanical Maintenance, Industrial Machinery, Industrial Equipment, Mechanical Engineering, Machinery Installation, Installation & Commissioning, Planned Maintenance, Preventative Maintenance, Breakdown Repairs, Fault Finding, Pumps, Gearboxes, Motors, Servicing, Site-Based Engineering, Field Service, Power Tools, Industrial Manufacturing, Paper Industry, Full UK Driving Licence \n \n We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. \n \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. \n \n

If you are a food factory Maintenance Engineer looking for a new challenge as a Field Service Engineer but also wanting a good work life balance or if you are an experienced Field Service Engineer with packaging machinery &/or food industry experience wanting less travelling and staying away then this is the job for you! BASIC SALARY: up to £50,000 BENEFITS:· Overtime to earn up to £70,000 · Choice of hybrid company car · 5% Pension LOCATION: Home based and 90% covering client sites in the Northwest you will ideally be living in or around Greater Manchester or elsewhere in Lancashire COMMUTABLE LOCATIONS: Manchester,Liverpool, Bolton, Preston, Blackburn, Burnley, Warrington, Chester, Blackpool, Lancaster JOB DESCRIPTION: Field Service Engineer, Maintenance Engineer - packaging machinery, food manufacturing A classic Field Service Engineer role working on installation, commissioning, repair & refurbishment of packaging machines used in the food manufacturing industry. You will be staying away 1 night per week on average with almost no weekend work required as 90% of your work will be on client sites in the Northwest. Overtime is paid door to door at 1.5 x outside core hours and double at night and over weekends. Full product training in the UK and Europe, with on site mentoring from a senior Engineer for the first 6 months. PERSON SPECIFICATION: Field Service Engineer, Maintenance Engineer - packaging machinery, food manufacturing · You will be an experienced food factory Maintenance Engineer ideally having hands on experience of working with packaging machinery. · Or you could be an experienced Field Service Engineer with hands on experience of packaging machinery used in the food manufacturing markets. · You MUST be a qualified Multi skilled Engineer with ideally a full apprenticeship up to HNC level in Electrical & Electronic engineering · 18th Edition & PLC knowledge would be advantageous. THE COMPANY: A well established, market leading and great company to work for with a fantastic culture and a very stable and loyal workforce. They manufacture and sell a range of packaging machinery to the food manufacturing market. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18622, Wallace Hind Selection

We have a fantastic opportunity for an experienced Electrical & Controls Design Engineer to join a specialist engineering business delivering bespoke automation and control system solutions across a range of industrial sectors. This role will focus on the design, development and commissioning of PLC, SCADA and electrical control systems, supporting projects from concept through to customer handover.This position would suit an Electrical & Controls Engineer with experience designing and commissioning industrial automation systems who enjoys working on varied, project-based work. It will appeal to someone who is confident programming PLCs, developing SCADA and HMI systems, producing electrical designs and working directly with customers throughout the project lifecycle.Key Responsibilities Design and develop PLC, SCADA and HMI control systems for bespoke industrial automation projects Produce electrical schematics, wiring diagrams and control panel designs using EPLAN Carry out PLC programming, system testing, commissioning and on-site fault finding activities Integrate variable speed drives, industrial communication networks and safety PLC systems into complete control solutions* Work directly with customers to manage projects from initial design through to commissioning and final handoverIn return you'll receive a salary up to £55k and the opportunity to work on a wide variety of technically challenging automation projects with excellent long-term career prospects .So if you're looking for a new role with a growing engineering business delivering cutting-edge control systems, get in touch today with Mark Dorey on , or call on 0161 416 6296 .TPBN1_UKTJ

Automation EngineerDaysDarwen£50,000 - £55,000An exciting opportunity has arisen for an experienced Automation Engineer to join a leading manufacturing business. This is a varied and hands-on role focused on delivering controls and instrumentation projects across a busy production environment.Responsibilities - Automation EngineerPlan, design and deliver automation and controls engineering projects from initial concept through to commissioning and handover.Develop and manage project plans, schedules, budgets and resource requirements.Program, modify and maintain PLC, HMI and SCADA systems to support manufacturing operations and improvement initiatives.Coordinate with internal stakeholders, contractors and suppliers to ensure project objectives are achieved.Conduct site surveys, inspections and progress reviews to ensure projects are delivered safely, on time and within budget.Prepare technical documentation, reports, specifications and project presentations.Support procurement activities, including specification reviews and supplier selection.Identify, assess and mitigate project risks throughout the project lifecycle.Ensure compliance with relevant industry standards, health & safety regulations and contractor management requirements.Provide technical support, coaching and mentorship to engineering colleagues.Drive continuous improvement and operational excellence initiatives across site automation systems.Experience / Qualifications - Automation EngineerBachelor's degree/HNC/HND in Electrical Engineering, Automation Engineering or a related engineering discipline.Previous experience as an Automation Engineer, Controls Engineer, Project Engineer or Improvement Engineer within a manufacturing or industrial environment.Strong knowledge of PLC, HMI, SCADA and instrumentation systems.Experience managing engineering projects from design through to implementation.Excellent understanding of engineering principles and project management methodologies.Proficient in engineering design tools and project management software.Strong communication, organisational and problem-solving skills.Ability to manage multiple priorities and deliver results in a fast-paced environment.Knowledge of health & safety legislation, industry standards and contractor management processes.Experience of continuous improvement, lean manufacturing or operational excellence programmes would be highly advantageous.Benefits - Automation EngineerPension Scheme with company contributions of up to 10%Free BUPA healthcare cover with the option to add family membersDental and optical healthcare programmeLife assurance at 4x annual salaryEmployee Assistance Programme and wellbeing servicesDiscounts platform offering savings across supermarkets, retail and hospitalityChristmas shutdown between Christmas and New YearChristmas Savings SchemeFree secure on-site parkingCanteen facilities25 days holiday plus bank holidaysOption to buy or sell up to 5 days annual leaveOnline Health & Safety and Business Compliance trainingFull PPE provided, including safety boots and spectaclesProfit share scheme and performance-related bonusesLong service awards and incentive programmesOn-site Occupational Health TherapistPhysical and mental wellbeing initiatives, including company fitness activitiesOngoing external training and development opportunitiesCompany social events and contributed Christmas partiesFor more information on this role, please contact Andy Haddon on 01453 796617, or send a copy of your CV toFor details of other opportunities available within your chosen field, please visitOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.Ideal background / Previous roles may include : Controls Engineer, Automation Engineer, PLC/SCADA Engineer, EC&I Engineer, Electrical Controls Engineer, Control Systems Engineer, or Project Engineer within a manufacturing or industrial environment.Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process.TPBN1_UKTJ

Design Manager – High Security Electronic Security Systems Location: Blackburn - HybridSalary: Competitive + BenefitsThe Role We are seeking an experienced Design Manager to lead the design and technical governance of high-security electronic security systems for critical infrastructure.You will provide technical leadership across bids and project delivery, ensuring solutions are compliant, resilient, commercially viable and aligned with customer security requirements. This role offers the opportunity to work on major nationally significant projects, including within the UK nuclear sector.Key Responsibilities Lead and develop a team of design engineers and technical specialists.Oversee the design of integrated CCTV, access control, intruder detection and security management systems.Review and approve technical designs, drawings and specifications.Ensure compliance with relevant industry standards, regulations and security requirements.Support bids and tenders through concept designs, technical solutions and customer presentations.Manage technical risk, design change control and quality assurance.Collaborate with project managers, contractors, consultants and client stakeholders.Support commissioning, handover and technical assurance activities.About You Significant experience within the electronic security systems industry.Proven track record designing complex integrated security solutions in regulated or high-security environments, such as nuclear, critical infrastructure, government or defence sectors.Experience leading design teams or acting as a technical authority on major projects.Strong knowledge of CCTV, access control, intruder detection and integrated security platforms.Understanding of networked security systems and cyber-security considerations.Proficient with design tools such as AutoCAD; BIM/Revit experience desirable.Strong communication, leadership and stakeholder management skills.Degree, HNC/HND or equivalent industry experience in a relevant engineering discipline - Electrical bias.Additional Requirements Full UK driving licence.Willingness to occasionally travel to sites across the UK.Ability to obtain and maintain Security Clearance.What's on Offer Opportunity to work on nationally significant nuclear, critical infrastructure projects.Senior leadership position with clear career progression.Competitive salary, benefits and flexible/hybrid working.Apply now to join a growing organisation delivering advanced security solutions for some of the UK's most secure and critical facilities.The recruitment process for this vacancy is being handled by Morson Edge. By applying to this vacancy, you are consenting to have your personal information shared with Morson Talent.Your candidate experience is at the utmost importance to us. If you are not yet ready to apply but would like to discuss any of the above or require any reasonable adjustments (e.g. being able to apply in a different format), please contact ;to arrange a confidential conversation.TPBN1_UKTJ

We have a fantastic opportunity for an experienced Electrical & Controls Design Engineer to join a specialist engineering business delivering bespoke automation and control system solutions across a range of industrial sectors. This role will focus on the design, development and commissioning of PLC, SCADA and electrical control systems, supporting projects from concept through to customer handover. This position would suit an Electrical & Controls Engineer with experience designing and commissioning industrial automation systems who enjoys working on varied, project-based work. It will appeal to someone who is confident programming PLCs, developing SCADA and HMI systems, producing electrical designs and working directly with customers throughout the project lifecycle. Key Responsibilities • Design and develop PLC, SCADA and HMI control systems for bespoke industrial automation projects, • Produce electrical schematics, wiring diagrams and control panel designs using EPLAN, • Carry out PLC programming, system testing, commissioning and on-site fault finding activities, • Integrate variable speed drives, industrial communication networks and safety PLC systems into complete control solutions, • Work directly with customers to manage projects from initial design through to commissioning and final handover In return you'll receive a salary up to £55k and the opportuni...

Switchgear Test/Commissioning Engineer Blackburn | £17.87 per hour | Excellent Career Opportunity We're recruiting a Commissioning Engineer to join a leading engineering manufacturer delivering modular electrical and power solutions for critical infrastructure projects. The Role Commission and test modular electrical systems and LV switchgear Carry out in-house and on-site commissioning Complete testing, commissioning and handover documentation Support first-of-kind (FOK) testing and equipment integration Fault-find electrical systems and resolve technical issues Work closely with project teams and customers Requirements Previous experience as a Commissioning or Test Engineer Electrical background with knowledge of LV switchgear Level 3 Electrical or Engineering qualification Able to read electrical drawings and fault-find Flexible to travel to customer sites when required Desirable Data Centre experience PDU experience Level 4 HTQ Engineering qualification What's on Offer £17.87 per hour Long-term opportunity with a global engineering business Workshop and site-based work Ongoing training and career development Work on innovative modular electrical projectsApply today! 📞 Neil Davies - Employment Solutions ☎️ (phone number removed) 📧 (url removed)...

Maintenance Fitter (Industrial Machinery) £32,000 - £35,000 + 4 Day Work Week + Early Thursday Finish + On-Site Parking + Overtime + Progression Blackburn Are you a Maintenance Fitter with a mechanical background, looking to join a growing manufacturer where you will work on bespoke industrial machinery across a variety of customer sites? On offer is the opportunity to join a well-established industrial machinery manufacturer, specialising in conveyor systems and hydraulic press out machines. Based in Balckburn, the company has almost 40 years of experience designing, manufacturing, installing and servicing bespoke machinery. Your role will involve carrying out site-based installation, commissioning, servicing and maintenance of industrial machinery and equipment. You will work on a variety of mechanical systems including pumps, gearboxes and motors, diagnosing breakdowns and carrying out repairs to ensure equipment is operating safely and efficiently. This role would suit a Maintenance Fitter or Mechanical Fitter, with experience working with pumps and motors. The Role Carry out installation and commissioning of new industrial machinery and equipment Undertake planned maintenance, servicing and repairs on customer sites Diagnose and repair mechanical breakdowns Monday to Wednesday, 7:30am - 5:45pm; Thursday, 7:30am - 4:45pm The Person Experience working as a Mechanical or Maintenance Fitter Full UK driving license If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH26842 Keywords: Mechanical Fitter, Maintenance Fitter, Mechanical Maintenance, Industrial Machinery, Industrial Equipment, Mechanical Engineering, Machinery Installation, Installation & Commissioning, Planned Maintenance, Preventative Maintenance, Breakdown Repairs, Fault Finding, Pumps, Gearboxes, Motors, Servicing, Site-Based Engineering, Field Service, Power Tools, Industrial Manufacturing, Paper Industry, Full UK Driving Licence We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Switchgear Test/Commissioning Engineer in Blackburn to join a leading engineering manufacturer. The role involves commissioning and testing modular electrical systems and LV switchgear, both in-house and on-site, with travel to customer sites as required. The position offers long-term opportunities

Guide Security, is a trusted name in the fire and security industry with over 30 years of experience. We specialise in the design, installation, commissioning, and maintenance of integrated fire and security solutions for clients across the UK. Fire & Security Service and Installation Engineer.

Kier Group, supporting United Utilities, is seeking a MEICA Project Manager to lead the delivery of MEICA scope across multiple schemes from design to handover in the North West of England.You will oversee design integration, manage M&E package plants and ensure on‑time commissioning with a strong

Design Manager – High Security Electronic Security SystemsLocation: Blackburn - Hybrid Salary: Competitive + BenefitsThe RoleWe are seeking an experienced Design Manager to lead the design and technical governance of high-security electronic security systems for critical infrastructure.You will provide technical leadership across bids and project delivery, ensuring solutions are compliant, resilient, commercially viable and aligned with customer security requirements. This role offers the opportunity to work on major nationally significant projects, including within the UK nuclear sector.Key ResponsibilitiesLead and develop a team of design engineers and technical specialists.Oversee the design of integrated CCTV, access control, intruder detection and security management systems.Review and approve technical designs, drawings and specifications.Ensure compliance with relevant industry standards, regulations and security requirements.Support bids and tenders through concept designs, technical solutions and customer presentations.Manage technical risk, design change control and quality assurance.Collaborate with project managers, contractors, consultants and client stakeholders.Support commissioning, handover and technical assurance activities.About YouSignificant experience within the electronic security systems industry.Proven track record designing complex integrated security solutions in regulated or high-security environments, such as nuclear, critical infrastructure, government or defence sectors.Experience leading design teams or acting as a technical authority on major projects.Strong knowledge of CCTV, access control, intruder detection and integrated security platforms.Understanding of networked security systems and cyber-security considerations.Proficient with design tools such as AutoCAD; BIM/Revit experience desirable.Strong communication, leadership and stakeholder management skills.Degree, HNC/HND or equivalent industry experience in a relevant engineering discipline - Electrical bias.Additional RequirementsFull UK driving licence.Willingness to occasionally travel to sites across the UK.Ability to obtain and maintain Security Clearance.What’s on OfferOpportunity to work on nationally significant nuclear, critical infrastructure projects.Senior leadership position with clear career progression.Competitive salary, benefits and flexible/hybrid working.Apply now to join a growing organisation delivering advanced security solutions for some of the UK’s most secure and critical facilities.The recruitment process for this vacancy is being handled by Morson Edge. By applying to this vacancy, you are consenting to have your personal information shared with Morson Talent. Your candidate experience is at the utmost importance to us. If you are not yet ready to apply but would like to discuss any of the above or require any reasonable adjustments (e.g. being able to apply in a different format), please contact ricky.shaw@morson-edge.com to arrange a confidential conversation.Location: Blackburn, Lancashire, EnglandSalary: Market relatedCategoryDesign EngineeringSector:Power, Nuclear and UtilitiesContract type PermanentConsultant: Ricky Shaw

If you are a food factory Maintenance Engineer looking for a new challenge as a Field Service Engineer but also wanting a good work life balance or if you are an experienced Field Service Engineer with packaging machinery &/or food industry experience wanting less travelling and staying away then this is the job for you! BASIC SALARY: up to £50,000 BENEFITS: · Overtime to earn up to £70,000 · Choice of hybrid company car · 5% Pension LOCATION: Home based and 90% covering client sites in the Northwest you will ideally be living in or around Greater Manchester or elsewhere in Lancashire COMMUTABLE LOCATIONS: Manchester,Liverpool, Bolton, Preston, Blackburn, Burnley, Warrington, Chester, Blackpool, Lancaster JOB DESCRIPTION: Field Service Engineer, Maintenance Engineer - packaging machinery, food manufacturing A classic Field Service Engineer role working on installation, commissioning, repair & refurbishment of packaging machines used in the food manufacturing industry. You will be staying away 1 night per week on average with almost no weekend work required as 90% of your work will be on client sites in the Northwest. Overtime is paid door to door at 1.5 x outside core hours and double at night and over weekends. Full product training in the UK and Europe, with on site mentoring from a senior Engineer for the first 6 months. PERSON SPECIFICATION: Field Service Engineer, Maintenance Engineer - packaging machinery, food manufacturing · You will be an experienced food factory Maintenance Engineer ideally having hands on experience of working with packaging machinery. · Or you could be an experienced Field Service Engineer with hands on experience of packaging machinery used in the food manufacturing markets. · You MUST be a qualified Multi skilled Engineer with ideally a full apprenticeship up to HNC level in Electrical & Electronic engineering · 18th Edition & PLC knowledge would be advantageous. THE COMPANY: A well established, market leading and great company to work for with a fantastic culture and a very stable and loyal workforce. They manufacture and sell a range of packaging machinery to the food manufacturing market. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18622, Wallace Hind Selection

Job role: Mobile Vehicle Technician £50,000 + Overtime + Company Van + Paid Travel Bonus Schemes - Upskilling Training Shift: Monday - Friday - DAYS We’re looking for a Mobile Vehicle Technician to join clients leading engineering team, working to service, maintain, and repair diesel engines within recycling & renewable energy sites. Full Training provided to up skill from vehicles to - Plant, Large engines, Generators, and associated machinery. The main responsibilities of the Mobile Vehicle Technician will include - • Service, Maintenance and Rebuilds of diesel engines, • Service, Maintenance and Repair of power generation machinery - CHP units, Generators, Biogas systems., • Service, Maintenance and Repair of Mobile Plant Machinery - Material Handlers, Loading Shovels, Forklifts, Cranes, Skid Steers, • Service, Maintenance and Repair of Conveyor Systems, Shredders, Balers Compactors., • Carrying out breakdown support on CHP units and generators, • Diagnosing and repairing faults on mechanical, electrical, and control systems, • Supporting installation, commissioning, and optimisation of new systems, • Delivering a high standard of customer service while working on client sites, • Working both independently and as part of a wider technical support team If you are interested in this Mobile Vehicle Technician role, please submit an up-to-date CV through this advert. Biogas / CHP / Generator / Maintenance Engineer / Multi Skilled Engineer / Maintenance Technician / Generator Engineer / Generator Technician / FSE / CHP Engineer / Biogas Engineer / Diesel Engineer / HGV Technician / PSV Technician / Vehicle Technician / Service Technician / Anaerobic Digestion / Renewable Energy / Car Technici

Job role: Maintenance Engineer - Field Based £50,000 - Overtime + Company Van + Paid Travel Industry Training Shift: Monday - Friday - DAYS Our Client is looking to upskill - Vehicle Technicians / HGV Technicians / Plant Fitters / Generator Engineers / REME / Army / RAF / Navy We’re looking for a Field Maintenance Engineer to join clients leading engineering team, working to service, maintain, and repair generators, CHP Systems and associated plant machinery. The main responsibilities of the Field Maintenance Engineer will include - • Carrying out planned maintenance and emergency breakdown support of Generators., • Diagnosing and repairing faults on mechanical, electrical, and control systems, • Supporting installation, commissioning, and optimisation of new systems, • Delivering a high standard of customer service while working on client sites, • Working both independently and as part of a wider technical support team, • Breakdown Support If you are interested in this Field Based Maintenance Engineer role, please submit an up-to-date CV through this advert. Biogas / CHP / Generator / Maintenance Engineer / Multi Skilled Engineer / Maintenance Technician / Generator Engineer / Generator Technician / FSE / CHP Engineer / Biogas Engineer / Diesel Engineer / HGV Technician / PSV Technician / Vehicle Technician / Service Technician / Anaerobic Digestion / Renewable Energy / Vehicle Technician / Vehicle Mechanic / Plant Fitter / Plant Engineer / REME / Army / Navy / RAF

We have a fantastic opportunity for an experienced Project Design Engineer to join a specialist engineering business designing and manufacturing industrial ovens, dryers and thermal processing systems for customers across a range of industries. This role will support projects from concept through to commissioning, developing bespoke engineering solutions and ensuring designs meet performance, safety and quality requirements. This position would suit a Design Engineer with experience in industrial equipment, process systems or bespoke machinery who enjoys seeing projects through from initial customer requirements to final installation. It will appeal to someone who is technically strong, customer focused and confident working closely with manufacturing, installation and project teams. Key Responsibilities Design industrial ovens, dryers and thermal processing equipment to meet customer specifications and industry standards Produce 2D and 3D engineering drawings using AutoCAD, fabrication drawings, P&IDs and technical documentation Generate Bills of Materials and support procurement activities for project delivery Provide technical support throughout fabrication, assembly, testing and commissioning phases * Liaise with customers, suppliers and internal teams to ensure projects are delivered on time and to specification In return you'll receive a salary up to £40k. So if you're looking for a new role with a growing engineering business delivering specialist thermal processing solutions, get in touch today with Mark Dorey on (url removed), or call on (phone number removed)

Location: Blackburn, Lancashire Salary: £55,000 - £65,000 + Package Job Type: Permanent Mechanical Estimator – Building Services MEP Technical Talent are working in partnership with a well-established Mechanical & Electrical contractor based in Blackburn to recruit an experienced Mechanical Estimator. Our client has built an excellent reputation for delivering high-quality mechanical and electrical engineering solutions across a wide range of sectors, including industrial, commercial, education, manufacturing, critical infrastructure and specialist engineering projects. They provide full design, installation and commissioning services, delivering projects from concept through to completion. Due to continued growth, they are looking to strengthen their pre-construction team with the appointment of an experienced Mechanical Estimator. The Role Working closely with the Pre-Construction and Operations teams, you'll be responsible for producing accurate and competitive mechanical estimates for a variety of building services projects. Responsibilities • Preparing detailed mechanical estimates from drawings and specifications., • Reviewing tender documentation and identifying project requirements., • Producing accurate take-offs and cost plans., • Obtaining and evaluating supplier and subcontractor quotations., • Preparing competitive tender submissions., • Identifying value engineering opportunities., • Liaising with clients, consultants and internal delivery teams throughout the tender process., • Supporting handovers to the delivery teams following successful tenders. Requirements We're keen to speak with candidates who have: • Previous experience as a Mechanical Estimator within the Building Services / M&E sector., • Strong knowledge of commercial mechanical installations including HVAC, heating, ventilation, pipework and public health services., • Experience pricing projects across commercial and industrial environments., • Ability to interpret technical drawings and specifications., • Strong commercial awareness and attention to detail., • Excellent communication and organisational skills. What's on Offer • £55,000 - £65,000 depending on experience., • Permanent position with a growing North West contractor., • Long-term career progression., • Supportive and collaborative working environment., • Opportunity to work on a varied portfolio of technically interesting projects

Design & Project Coordinator – Electrical Utilities Location: Blackburn Salary: £40,000–£50,000 DOE Working Pattern: Office-based 4 days per week, 1 day working from home Employment Type: Permanent We are working with a rapidly growing Independent Connection Provider delivering electrical connections and utility infrastructure projects across the UK. Due to continued growth, they are looking to appoint an experienced Design & Project Coordinator to support their design and project delivery teams from their Blackburn office. This is an excellent opportunity for somebody with experience in electrical utilities, infrastructure, construction or engineering who enjoys coordinating projects, managing technical information and keeping multiple workstreams moving. Experience within DNO, IDNO, ICP, LV/HV networks, substations or utility connections would be particularly advantageous. The Role As Design & Project Coordinator, you will work closely with Project Managers, Design Engineers, Planners, clients, contractors and utility stakeholders to help ensure projects progress efficiently from design through to construction, commissioning and handover. Your responsibilities will include: Coordinating design and project documentation across multiple utility projects Preparing, issuing and distributing drawings, specifications, technical reports and project correspondence Maintaining drawing registers, document control logs and revision records Monitoring design approvals and following up outstanding information Supporting Project Managers and Design Engineers with project schedules, milestone trackers and action logs Monitoring key project dates, approvals, commissioning activities and handover requirements Coordinating technical information between internal teams, clients, contractors, suppliers and other stakeholders Liaising with Distribution Network Operators (DNOs) and Independent Distribution Network Operators (IDNOs) Supporting design submissions for LV/HV networks, substations, underground cables, overhead lines and associated utility infrastructure Maintaining records of RFIs, technical queries, design changes and client comments Assisting with as-built documentation and project handover packs Supporting cost tracking, budget updates and project reporting where required Maintaining project files, permits, approvals, meeting minutes and progress reports Updating project management and document management systems Supporting compliance with quality, regulatory and health & safety requirements Assisting with resource planning and coordination across multiple projects About You We are interested in speaking with candidates who have: Previous experience in a Project Coordinator, Design Coordinator, Project Support or Design Administration role Experience within electrical utilities, power, construction, engineering, infrastructure or energy Knowledge of electrical utility projects involving LV/HV networks, substations, underground cables or utility connections Experience managing technical documents, drawings and project records Strong organisational skills with the ability to manage multiple projects and priorities Excellent attention to detail Strong written and verbal communication skills Confidence dealing with project managers, engineers, clients, contractors and external stakeholders Experience using document management or project management systems The ability to work independently while supporting a multidisciplinary project team Experience with DNO procedures, G81 standards, utility design submissions and technical approval processes would be particularly beneficial. Experience with AutoCAD, project completion documentation and projects through construction, commissioning and handover would also be advantageous. Package £40,000–£50,000 per annum, dependent on experience 1 day per week working from home Permanent position within a rapidly growing electrical infrastructure business Exposure to a varied portfolio of utility and power projects Opportunity to work closely with experienced design and project delivery professionals Excellent long-term development opportunities within a growing organisation If you have experience coordinating projects within electrical utilities, power, infrastructure or engineering and are looking for a role offering genuine responsibility and progression, we would like to hear from you. Apply today for a confidential discussion

Electrical Design Engineer - Special Purpose Machinery Location: Stockport Salary: Up to £55,000 Job Type: Permanent The Opportunity We're recruiting for an Electrical Design Engineer to join a leading manufacturer of bespoke automation and special purpose machinery. You'll play a key role in designing electrical control systems for complex manufacturing equipment, working alongside automation and mechanical engineering teams to deliver innovative machinery for customers worldwide. Responsibilities Produce electrical schematics using AutoCAD Electrical and EPLAN. Design electrical control panels and machine wiring layouts. Develop PLC I/O architecture and control system documentation. Specify sensors, instrumentation, drives and safety systems. Produce electrical BOMs and technical documentation. Support commissioning and machine build activities. Work closely with software engineers on PLC integration. Requirements Electrical Design experience within machinery or automation. Experience designing control panels and machine electrical systems. Understanding of PLC control systems. Knowledge of instrumentation and industrial automation. AutoCAD Electrical and/or EPLAN experience. Desirable Experience Siemens Allen Bradley Beckhoff Mitsubishi Omron Machine Safety Functional Safety Servo Systems Benefits Salary up to £55,000 Pension Healthcare Flexible working Modern engineering facility Career progression into Senior/Lead Design Engineer