Trabajos maintenance en Los Angeles, CaliforniaCrear alertas

Overview: Position: Registered Nurse Location: Anaheim, CA Department: Cath Lab Shifts Available: Per Diem, Days Pay: up to $968- $1,056 gross pay per shift Assignment length: 4 weeks Premiere Healthcare Staffing is here to help you on your career journey! We place talented candidates with our partner healthcare facilities with the shared goal of providing exceptional, compassionate care. • Award-winning hospital partners across the nation, • Dedicated career specialists to support you every step of the way, • Immediate and flexible opportunities to create your career journey, • Tailored career pathway where you can thrive personally and professionally Responsibilities:, • Address patients’ physical, psychosocial, and emotional needs, • Monitor and document hemodynamic/physiologic data; respond to changes promptly, • Assist physicians with diagnostic and interventional procedures (e.g., caths, pacemakers, angioplasty), • Prepare and maintain procedure rooms, equipment, and supplies, • Ensure accurate documentation and compliance with all standards, • Support quality improvement and patient safety initiativesCollaborate effectively with the interdisciplinary team, • Deliver patient care before, during, and after cardiac and vascular procedures Qualifications: EDUCATION, EXPERIENCE, TRAINING 1. Current and valid state RN License., 2. Current BLS (AHA) certificate upon hire and maintenance., 3. Current ACLS (AHA) certificate upon hire and maintain current., 4. Minimum of one-year previous Cath Lab experience required. #appcast Pay Transparency: Premiere Healthcare Staffing provides competitive compensation. The reasonable pay estimate for this position is $ $88.00 to $96.00 per hour, applicable to California residents. This estimate has not been adjusted for other locations. The actual compensation offered will be based on several factors, including skill level, relevant experience, education, certifications, and licensure. Equal Employment Opportunity: #LI-JO3 Company is an equal employment opportunity employer. Company prohibits discrimination against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age (subject to applicable law), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Know Your Rights: https://www.eeoc.gov/sites/default/files/2022-10/EEOCKnowYourRightsscreenreader10_20.pdf

The Architecture & Facilities Engineering (A&FE) team is looking for a Staff Civil Engineer to support the development and sustainment of assets and projects we support throughout the Disneyland Resort. You will provide technical expertise, problem solving, and QA/QC for projects we support throughout the Disneyland Resort. Our department supports a wide range of project types that include shops, attractions, hotels, entertainment, maintenance facilities, offices, and nearly any built facility and area development found on our property. Projects range from preliminary research, full facility assessments to minor renovations and new facilities. You will work in close collaboration with architects, other engineering disciplines and multiple internal Disney project teams. As a Staff Civil Engineer, you will manage the inception, design development, implementation, and sustainment of underground utilities, drainage, grading, soil evaluations, waterways, and foundational systems supporting the many assets at the Disneyland Resort. You will help develop bid level construction documents, including drawings and specifications. You will support the development and authoring of requests for proposals (RFPs) and develop workload estimates with critical path schedule dates to support our project management team. You will report to the Sr. Manager – Civil/Structural Engineering. Responsibilities/You Will Act as Owner’s Representative on projects from concept through construction at the Disneyland Resort. Project types will include shops, rides, hotels, shows, maintenance facilities, and nearly any built facility and area development found on our property. Manage the design and development of contract documents of projects with in-house and outside resources to meet project scopes, schedules and budgets. Develop concepts and RFPs (Request for Proposals). Attend, participate, and problem solve during site visits from concept through construction. Review drawings and specifications and ensure that all projects are designed and executed to applicable codes and statutes. Work with stakeholders to provide civil engineering resources to develop project scope including design, planning and code compliance for estimation and feasibility. Resolve design issues creatively and thoroughly coordinating design with other disciplines. Partner with internal teams to develop, maintain, communicate, and enforce Walt Disney Company design guidelines, standards, master specifications, and details As the owner's representative, review with a focus on constructability, efficiency, and long-term maintainability. Research Record Drawings in Disneyland Archives. Perform field work to investigate and assess utilities infrastructure in the Resort. Independently review new and existing design drawings and calculations Review shop drawing submittals and respond to vendor’s requests for information per Resort standards. Coordinate design activities and monitor field installations and demolition work that comply with specifications and code requirements. Perform reviews of existing infrastructure: propose upgrades and replacements, present findings and recommendations. Provide general consultation on codes as well as Resort guidelines related to civil structures. Prepare plans for grading, storm drain, water distribution, sewage, and other underground utilities. Review and prepare calculations and reports for water quality management plans, including best management practices and storm water pollution prevention plan. Design with focus on constructability, efficiency, and long-term maintainability. Lead the development of system models of underground utilities. Expedite the receipt of sample submittals required for final design approval. Participate in weekly design coordination meetings and prioritize items to minimize schedule impacts. Act as Design Manager to resolve design compliance issues relating to Projects requirements. Validate that all Item Specifications are consistent with products installed before archiving manuals. Basic Qualifications/You Will Have 10+ years of experience in civil engineering design, including site layout, grading, drainage, utilities, stormwater management, erosion, and sedimentation control. Experience with design, procurement, and construction support. AutoCAD (Civil 3D), Revit, Adobe Acrobat, or Bluebeam Revu. Effective communication skills (verbally and written) with clients, employees, and management. Ability to be a self-starting collaborator to provide experience to bring concepts into physical reality. Working knowledge of standards and codes applicable to civil utility systems. Preferred Qualifications Experience with data management and editing in Esri ArcGIS. Required Education and Licensure BS Civil Engineering or related field from an ABET accredited university. Current registration as a Professional Engineer in the State of California. #DXMedia #DXFOS #LI-YW1 Additional Information Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at _. The hiring range for this position in Anaheim, CA is $126,800.00 to $154,800.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate’s geographical region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

The Associate Project Manager position ensures that all assigned projects are properly scoped, designed, and executed with an emphasis on strict scope, budget, and schedule control. You will successfully manage each assigned project from inception to completion, continually delivering projects within the approved budget and schedule with the highest quality, cost-effectiveness, and efficiency. You will report to the Manager of Programs SAFETY: Responsible for overall project safety, obtaining final approval for contractor submitted safety plans and compliance to the project safety plan. Includes compliance to all regulatory (OSHA) requirements, corporate governance requirements, and Facilities Asset Management (FAM) Standard Operating Guide (SOG). PLANNING & DEVELOPMENT: Responsible for the development, planning, execution, and closeout of all aspects of the project throughout the project life. Includes project design, development, implementation, budget, cash flow reporting, and maintaining accurate Estimated Forecast to Complete (EFC) for financial reporting, and maintenance of all job files. Lead project scope development and options analysis. Lead project estimate development and review with the support of the Project Estimator. Develop project implementation strategy and schedule with the support of Project Scheduler. Obtain funding approval before implementation with the support of the Project Controller. Closely manage project timelines and schedules to manage client expectations and ensure minimum impact on Operations. TEAMWORK AND COLLABORATION: Assemble project teams with internal and external resources to complete all assigned projects. Oversee the efforts of all project team members to ensure that they are working as an integrated team in delivering against project goals. Develop and maintain positive relationships with team members and customers/clients. Partner with all lines of business (LOB) to ensure the final product best meets the intended business objective. CONTRACT DEVELOPMENT: Provide support for the administration of contracts including the scope of work, unit costing items, bid alternates, and operational constraints required for contract preparation. PROJECT SCHEDULE: Responsible for the project schedule, establishing critical path tasks to ensure schedule compliance, and ensuring proper man loading requirements of the contractor to achieve the desired completion date. CLIENT COMMUNICATION: Responsible for coordinating operational constraints and job objectives together to achieve a seamless project. Including timely communication with Business Partners, Clients, and management regarding project status, schedule, and financial and guest impacts. Communicate project information effectively to LOB client and all impacted Resort divisions and management. TECHNICAL COMPETENCY: Technically competent with various software programs such as construction management software and Microsoft suite of products (Excel, Word, PowerPoint, etc.) Utilize project and contract management systems in the daily operation of the business. PROCESS COMPETENCY: Responsible for timely issuance of field directives, collection of costing concurrence memos, conversion to change orders, and management approval to allow for accurate Estimated Forecast to Complete (EFC) reporting and timely job closeout. Manage project budgets and provide timely project spending updates with the support of the Project Controller. Work closely with the Program Manager to accomplish objectives and improve business processes. Focus on continuous performance improvement and efficiency. Four-year college degree (BA / BS) in project/construction management or related field and 2+ years of applicable hands-on project/ construction experience or 2 years of college and 8+ years of applicable hands-on project/construction experience. Four years of project management/construction management in hospitality, commercial and industrial construction. Theme Park construction experience is a plus. Proven knowledge of project management process and demonstrated ability to manage a portfolio of projects over $4M annually. Proven knowledge of project accounting, estimating, scheduling, budgeting, document management, best value contracting, contract management, and cost forecasting. Knowledge of construction materials, methods, and techniques. Familiarity with all construction applicable codes, i.e., UBC, NEC & UFC. Excellent oral and written communication skills with the ability to prepare presentations for department management reviews that drive related decisions. Outstanding attention to detail and organization skills. Demonstrated leadership skills. Demonstrated computer skills in Windows, Excel, and PowerPoint. Ability to communicate with all levels, including hourly crafts as well as executives. Ability to prepare and deliver executive presentations. Strong customer service orientation. Strong problem-solving and analytical skills. Ability to identify project-related risks and propose mitigation plans. Four-year college degree (BA/BS) in project/construction management or related field and 2+ years of project/ construction related experience; or 2 years of college and 8+ years of applicable hands-on project/construction experience. MBA in Project/Construction Management or related field Knowledge of Primavera P6, MS Access, and/or PMWeb. Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at https://jobs.disneycareers.com/benefits #DXMedia #LI-AH3 The hiring range for this position in Anaheim is $104,800.00 - $128,00.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate’s geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Sr. Associate, Additive Manufacturing Engineer Job ID: 40294 Job Location: Canoga Park, CA Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Shift: 2nd - 10% Shift Differential Pay Job Description: The Senior Associate, Additive Manufacturing Engineer supports daily execution of metal additive manufacturing operations, including file preparation, printing, depowdering, post-processing, machine maintenance, and production troubleshooting to meet safety, quality, cost, and schedule objectives. This role is responsible for developing and improving process flows, work instructions, process controls, and manufacturing documentation while monitoring production performance data to identify root causes and drive continuous improvement. The engineer collaborates cross-functionally with design, quality, materials, maintenance, and production teams to translate design requirements into scalable additive manufacturing solutions, support equipment commissioning and process development, and improve manufacturability through tooling, fixturing, and post-processing methods. The ideal candidate brings hands-on experience in metal additive manufacturing, the ability to independently manage technical tasks in a fast-paced, regulated manufacturing environment, and working knowledge of Design for Additive Manufacturing (DfAM), Computer-Aided Design (CAD) tools, and quality systems. Essential Functions: • Operate and support advanced LPBF additive manufacturing equipment and related production processes, including file preparation, printing, depowdering, post-processing, and machine cleanout., • Drive daily execution of additive manufacturing operations to ensure safe, efficient production and consistent achievement of engineering, quality, customer, and schedule requirements., • Establish, maintain, and improve manufacturing process flows, standard operating procedures, work instructions, checklists, process controls, and safety protocols to ensure repeatability, reliability, and compliance., • Analyze data to identify trends, root causes, and opportunities for corrective action and continuous improvement., • Lead and support process improvement initiatives to increase throughput, reduce variation, waste, cost, and lead time, and improve overall product quality and manufacturing efficiency., • Support installation, commissioning, integration, maintenance, and troubleshooting of additive manufacturing equipment, including coordination with OEMs and internal support teams., • Develop tooling, fixturing, and post-processing solutions to improve manufacturability, repeatability, and flow of printed hardware through downstream operations., • Review technical data, drawings, customer requirements, internal procedures, and manufacturing documentation to ensure accuracy, compliance, data integrity, and alignment with production and quality standards., • Maintain a safe working environment by identifying and implementing safety improvements for additive manufacturing processes, equipment, material handling, and surrounding work areas., • Represent additive manufacturing processes to internal stakeholders and product teams, providing technical support for prototype, development, and production builds., • Lead or own improvement projects and other individual tasks through completion while contributing effectively in a team-based manufacturing environment., • Translate design requirements into manufacturable additive processes by evaluating part candidates for material selection, machine selection, manufacturability, design optimization, and business case viability., • Collaborate with design, materials, quality, maintenance, production, and other cross-functional teams to refine part designs, support development of process parameters, new materials and equipment, and scalable production methods., • Generate manufacturing estimates, including base timing, capacity, cost, schedule, ROI, and quoting support for internal and external customers., • Travel up to 10%, • Ability to obtain a US LEVEL Secret security clearance Basic Qualifications: • Bachelor’s Degree and a minimum of 2 years of prior related manufacturing experience. Graduate Degree or equivalent with 0 to 2 years of prior related manufacturing experience. In lieu of a degree, minimum of 6 years of prior related manufacturing experience. Preferred Qualifications: • Minimum 1 year of hands-on experience with metal Additive Manufacturing, • Experience with CAD Modeling software (i.e. Creo, SolidWorks, NX, etc.) and Microsoft Office suite (i.e. Word, Outlook, PowerPoint, & Excel), • Exceptional written and oral communication skills to include: work instructions, process procedures, design review presentations, requirements derivation, and reports/materials to support company projects and activities., • Hands-on experience with metal additive manufacturing processes, including DMLS/LPBF, supporting machine operation, troubleshooting, parameter development, build file optimization, and production execution., • Strong knowledge of DfAM principles, with the ability to interpret engineering drawings, apply GD&T, and improve part manufacturability and process outcomes., • Familiarity with additive post-processing and inspection methods, including heat treatment, support removal, EDM, machining, NDT, and structured light inspection., • Experience supporting process development and industrialization, including material and machine selection, equipment commissioning, capability assessment, and workflow improvement., • Experience in ISO 9001 and/or AS9100 manufacturing environments, applying quality systems, root cause analysis, and cross-functional collaboration to resolve production and process issues., • Ability to manage multiple priorities, solve technical problems independently, and collaborate effectively in fast-paced manufacturing environments while continuing to build additive manufacturing expertise. In compliance with pay transparency requirements, the salary range for this role in the State of California is $73,000 - $136,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-AT4 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in or . For information regarding your Right To Work, please click here for or .

The Ready-Mix Plant Manager works closely with the batch men and drivers in overseeing ready-mix plant production, operations and site facilities. This individual is responsible for planning and budgeting, effective and efficient operations management, equipment utilization, safety and environmental compliance as well as personnel management. This position ensures that customer quality requirements are met. At CalPortland, we’re proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That’s why we give you a wide range of benefits to choose from. All regular full time employees may enroll in a variety of health and welfare plans including medical, dental and vision plans. Other benefits include life insurance, disability coverage, employee assistance program, and retirement program. The company also has a variety of voluntary benefits for employees to choose from. $75,000 - $105,000 Annual Salary DOE • Responsible for safety, environmental matters, cost control, production and maintenance for the ready-mix facilities, • Establish and monitor a production plan: maintain accurate cost and inventory control, calculate and analyze productivity and material data, • Document production statistics and produce reports and analysis as required, • Oversee mobile equipment, • Responsible for capital and operating budget processes, • Develop plans to work towards improved performance and lower operating costs, • Understand the value of quality and ensure processes are in place to provide a quality product to customers, • Perform duties related to OSHA/CalPortland regulations, including accident investigations and reporting, safety meetings, training, etc.; actively engage with employees to reinforce safe behaviors, • Work closely with other departments to ensure safety, environmental compliance, quality and materials performance, • Communicate and maintain positive relationships with the local community, • Personnel management and development, • BS in Mechanical, Electrical, Mining, or Civil Engineering or equivalent a plus, • Any relevant operations management certifications, i.e. industry specific management training, • Minimum 5-7 years’ experience running a ready-mix operation, including ancillary functions such as yard production and product delivery, • Experience with OSHA/MSHA regulations and requirements, • Knowledge of Department of Transportation (DOT) regulations and requirements, • Experience managing groups of employees in one or more locations, • Experience implementing training programs for drivers including driving technique, truck maintenance, product delivery, ticketing, payments and customer service, • Personnel management experience, i.e., interview and selection, performance reviews, wage issues, discipline and legal compliance requirements a plus, • Work experience with SAP or equivalent ERP system a plus, • Knowledge of office systems, including proficiency in Microsoft Office Suite products, i.e., Outlook, Word, PowerPoint and Excel, • Strong leadership, organizational, problem-solving and interpersonal skills, • Strong oral and written communication skills, • Customer service orientation Preferred: • Experience in a vertically integrated construction materials organization, • Experience with SAP Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA regulated on-going drug and alcohol testing.

POSITION SUMMARY Reporting to the Director, Ambulatory Services of the Martin Luther King, Jr. Los Angeles (MLK-LA) Healthcare Corporation, the Ambulatory Clinical Supervisor is responsible for successfully managing day to day operations of MLKCH outpatient clinic(s) and ambulatory services involving one or more specialty disciplines and/or clinic sites. During one 8 hour shift, provides first-line operational supervision for assigned functional area of responsibility (e.g., MOB primary or specialty care department, urgent care, day/evening/night shift in emergency medicine department). Ensures that healthcare staff delivering ambulatory care/patient services provide high quality, accessible, cost effective care and patient - focused services to members that comply with Martin Luther King Jr. Community Hospital standards as well as with local, state and federal requirements. Within assigned area: implements, supervises/monitors and maintains clinical practice and quality management standards, and staff competencies/development. ESSENTIAL DUTIES AND RESPONSIBILITIES 1. In assigned area/function, supervises the operations and delivery of patient care services., 2. Ensures staff provide highest quality of care which complies with the Nurse Practice Act, TJC, federal/state/local requirements., 3. Establishes and maintains effective, collaborative relationships with physicians and other departments., 4. Collaborates with nursing and other departments to resolve patient care issues, meet access demands, provide convenient hours of operation, improve the cost structure and develop consistent policies and procedures., 5. Supervises and maintains patient care and quality service standards to meet members' and internal clients' expectations., 6. Acts as patient advocate resolving patient care issues., 7. Recommends and evaluates processes to improve systems and patient care results across the continuum of care., 8. Monitoring budgets and resource allocations and financial performance and identifies and recommends strategies to reduce costs and improve quality of care/service., 9. Supervises use and maintenance of equipment, supplies and medications., 10. Assists site Administrator in developing and maintaining the competency of all department staff., 11. Supervises and monitors the implementation of departmental polices and procedures which support the goals and business objectives of the department and organization., 12. Collaborates with physicians, Medical Director, Site Administrator, Direct of Ambultory Services, in developing the appropriate level of patient services and the day-to-day operations of the department., 13. Measuring and improving internal and external customer satisfaction., 14. Assists in managing and resolving human resource, labor relations, employee and department safety, and risk management issues., 15. Procure supplies and other materials needed for the medical group site at competitive prices and with reputable vendors., 16. Participate in development and implementation of long-range plans., 17. Assist in resolution of administrative and operational issues including the maintenance of clinic property, computer systems and installed software applications., 18. Participate in management or leadership meetings as directed or requested., 19. Ensure compliance with regulations and standards., 20. Serve as a liaison between site and external agencies., 21. Assists leadership develop clinic strategic plans and objectives based upon identified needs of patients., 22. Maintain the strictest confidentiality., 23. Responsible for the selection, hiring, orienting, training and supervision of all medical group staff (non-provider staff)., 24. Evaluate employee performance and recommend merit increases, promotions and disciplinary actions., 25. Resolves problems in administrative and clinical areas, 26. Organize and conduct regular staff meetings including setting the meeting agendas., 27. Ensure that staff is trained and operates in compliance with all government and other regulatory agencies., 28. Perform other duties as assigned. POSITION REQUIREMENTS A. Education • Associates degree in nursing required. Bachelor's degree from a four-year college and/or a professional certification requiring formal education preferred., • Current California RN license., • Current Basic Life Support for Providers, by American Heart Association (AHA), • Advanced Life Support certification (ACLS), by American Heart Association (AHA) B. Qualifications/Experience • Registered Nurse with at least 2yrs of clinical experience in a hospital, clinic, home care, nursing home setting or health facility within the last 5yrs., • Minimum 2 years of supervisory or management experience in a health care setting, • Has excellent observation, verbal and written communication skills., • Highly organized and ability to work independently., • Ability to work with people of diverse backgrounds., • Computer literate with proficiency in Microsoft Office, Google Suite, electronic medical records and ability to learn new applications easily., • Demonstrates ability to supervise and direct administrative personnel. C. Special Skills/Knowledge • Must be able to relate well to patients, clinicians, employees, and other professionals. Must be able to handle confidential issues with discretion. Must be able to understand the goals of the practice and work to obtain these goals independently as well as in collaboration with clinician partners. Must have working knowledge of managed care and other current health insurance arrangements. Bi-lingual in Spanish and English required. #LI-YD1

POSITION SUMMARY The Respiratory Care Practitioner is the professional responsible for the provision of respiratory care, cardiopulmonary resuscitation, advanced airway management and related diagnostics. He/she works as a resource person for the nursing staff within the guidelines of department and hospital policies and procedures. Reporting to the Department Manager, the Respiratory Care Practitioner has 12 hour accountability for organizing, planning, directing, coordinating, and providing high quality, individualized care for a defined group of patients care based on the Watson Model of Care, including the identification and demonstration of abilities to meet special needs and considerations of Age and Population Specific awareness. This position requires the full understanding and active participation in fulfilling the Mission of Martin Luther King, Jr. Community Hospital. It is expected that the employee will demonstrate behavior consistent with the Core Values. The employee shall support Martin Luther King, Jr. Community Hospital's strategic plan and the goals and direction of the quality and performance improvement process activities. ESSENTIAL DUTIES AND RESPONSIBILITIES 1. Knows admitting diagnosis and pulmonary pathophysiology for assigned patients, performs patient assessments and provide appropriate therapy., 2. Evaluates and documents data obtained from respiratory monitoring devices on assigned patients., 3. Evaluates patient's response to all respiratory care provided and appropriately documents required information as outlined in department policies and procedures., 4. Determines appropriateness and provides recommendations for respiratory care services, taking into consideration the needs of different age groups, cognitive abilities, and development status., 5. Initiates new routine orders within time specified in department policies and procedures., 6. Measures and adjusts airway cuff pressures., 7. Recommends changes in diagnostic and therapeutic procedures to physicians, nursing, and/or co-workers., 8. Taking into consideration patient age and development status, modifies those treatments/procedure techniques which do not require a change in physician's orders to optimize the delivery of care, and reports modifications to appropriate health care team members., 9. Utilizes the appropriate chain-of-command when consulting on patients not responding to standard therapeutic procedures., 10. Performs respiratory diagnostic and therapeutic procedures., 11. Provides ventilatory support during patient intra hospital transfers., 12. Performs procedures for disinfecting respiratory equipment and adheres to infection control policies and procedures., 13. Performs and evaluates blood gas analysis to include quality control procedures adhering to lab policies and procedures., 14. Obtains arterial, capillary, and cord blood samples, ensures that samples are labeled appropriately, handles and disposes of blood samples per policy and procedure., 15. Performs blood gas analysis; documents and reports critical blood gas values to nurse/physician., 16. Performs analyzer maintenance and quality controls and ensures cleanliness of the blood gas laboratory., 17. Performs cardiopulmonary and neonatal resuscitation (CPR/NR) and responds to emergencies in all areas., 18. Auscultates lungs to assure proper endo-tracheal tube placement., 19. Identifies contraindications in regards to chest physiotherapy and appropriately informs and provides recommendations to the physician., 20. Performs oral, nasal, and tracheal suctioning to ensure airway patency., 21. Collaborates with physicians and nurses in regards to the appropriate frequency of suctioning for assigned patients., 22. Provides reasonable solutions upon the identification of problems., 23. Participates in Patient/Family Teaching: Independently assesses patient learning needs and seeks assistance in identifying/meeting learning needs of patients and families specific to management of chronic pulmonary disorders. Patient family education is to include disease management, proper use of medication and administration devices, oxygen therapy and related equipment., 24. Maintains a safe and clean environment that complies with regulatory standards including Patient Safety Goals., 25. Participates in the implementation of the department specific Quality and Performance Improvement Plan, completes monitoring forms and reports findings to the Respiratory Manager. POSITION REQUIREMENTS A. Education • Graduate of a Commission on Accreditation for Respiratory Care (CoARC) approved school and passage of the National Board of Respiratory Care (NBRC) certification examination. B. Qualifications/Experience • Minimum of one (1) year of experience as a Respiratory Care Practitioner in an acute care setting with regard to regulatory guidelines and standard of practice. In lieu of this experience, consideration will be made for an applicant with strong education and associated experiential background., • Current California Respiratory Care Practitioner license, • National Board of Respiratory Care (NBRC) Certified Respiratory Therapist (CRT) credential or National Board of Respiratory Care (NBRC) Registered Respiratory Therapist (RRT) credential ., • Consideration will be made for credential-eligible or CRTT-credentialed Respiratory Therapist with over 25 year's experience. C. Special Skills/Knowledge • Bilingual skills preferred (Spanish), • Basic computer skills, • Current Basic Life Support (B LS), • Advanced Cardiac Life Support (ACLS), • Pediatric Advanced Life Support (PALS), • Managing Assaultive Behavior (MAB) (Upon hire or with 90 days of hire), • Neonatal Resuscitation Program (NRP) (Upon hire or within 90 days of hire), • Electronic Medical Record experience preferred

MANTECH seeks a motivated, career and customer-oriented Activity Security Representative to join our team in El Segundo, CA. The Activity Security Representative (ASR) will leverage their strong technical background and knowledge to provide multi-disciplined security support to a customer’s facility and organization. You will provide day-to-day support for Collateral, Sensitive Compartmented Information (SCI), and Special Access Program (SAP) activities. This is a five-day a week in the office in Los Angeles, CA. Responsibilities include but are not limited to: Conducting classification reviews of inbound and outbound correspondence and maintaining document accountability databases. Processing and destroying classified materials and magnetic media while maintaining daily administrative logs for document control. Assisting in the processing and electronic transfer of data files to internal customers and maintaining extensive point of contact listings. Researching and filing inbound and outbound visit notices and escorting facility visitors while maintaining associated logs. Conducting entry and exit inspections and assisting in the preparation of facility access control badges and entry system maintenance. Performing data entry into personnel security databases and maintaining customer-sponsored billets and quota information. Enforcing customer Standard Operating Procedures and providing support for security awareness and education programs. Minimum Qualifications: Bachelor’s degree in a related field or 4 additional years of experience will be considered in lieu of degree. 2+ years of related experience. 1+ years of experience with SCI or SAR programs. Must complete DoD SAPCO approved SAPNP training within six months of starting on the contract if performing SAP personnel security functions. Familiarity with SIMS database or completion of training within six months of hire if performing document control functions. Completion of JPAS/DISS training within six months of hire if performing SCI personnel security functions. Completion of Joint Access Database Environment (JADE) training within six months of hire if performing SAP personnel security functions. Preferred Qualifications: 1+ years of experience with SAP programs. Familiarity with security policy manuals and other guiding policy documents used in Government contracting environments. Self-starter with excellent people skills—able to work in dynamic environments and interact effectively with DOD, military, and industry partners. Clearance Requirements: Current Top-Secret Clearance with SCI Eligibility. Eligibility for access to Special Access Program Information. Willingness to submit to a polygraph. Physical Requirements: Must be able to remain in a stationary position 50%. Willingness to travel within the organizational Area of Responsibility (AOR) (note - could be extensive and will include both air and ground transportation).

MANTECH seeks a motivated, career, and customer-oriented Network System Administrator (NSA) - I to join our team in El Segundo, CA. You will provide day-to-day support for Collateral, Sensitive Compartmented Information (SCI), and Special Access Program (SAP) activities supporting SSC Directorates and/or AFSPC Operational Units in a full-time, on-site environment. Responsibilities: • Install, maintain, audit, and support a secure MS Windows network environment and limited web/data application services., • Maintain internet applications and protocols including IP, TCP, HTTP, HTTPS, FTP, and SSL., • Maintain file servers, firewalls, network access, Security Monitoring Systems, and system documentation., • Interface directly with local customers to provide technical IT support and quickly resolve system anomalies., • Perform periodic maintenance, hardware upgrades, replacement, firmware updates, and system configuration changes., • Manage data backup libraries, conduct scheduled tape backups, and maintain secure storage both on-site and off-site., • Attend planning meetings with IT staff, Program Managers, and customers to prepare systems for operational use and support testing. Minimum Qualifications: • Bachelor’s degree in a related field or 4 years of additional experience in lieu of a degree., • 1+ years of total relevant IT experience, • Must meet DoD Directive 8570.01-M/8140 IAT Level II certification requirements (e.g., Security+ CE, CCNA, CySA+, CND) within 6 months of hire., • Possess applicable Windows professional certifications based on operating system requirements for the supported organization. Preferred Qualifications: • 1 year of SCI or SAP experience highly desired., • Thorough knowledge of Microsoft Windows Server, Microsoft Exchange Server, and Windows client operating systems and associated hardware., • Working knowledge of LAN/WAN technologies, data backup systems, and COMSEC integration., • Working knowledge of JAFAN 6/0, DCID/JAFAN standards, ICDs, and Joint DODIIS/Cryptologic SCI Information Systems Security Standards., • Experience with PL1 through PL4 systems and cross-domain solutions., • Strong ability to work independently in a dynamic environment with DoD, military, civilian, and industry partners. Clearance Requirements: • Current Top-Secret Clearance with SCI Eligibility, • Must be eligible for access to Special Access Programs (SAP)., • Must be willing to submit to a Counterintelligence polygraph. Physical Requirements: • Requires travel within the organizational Area of Responsibility (AOR), which may include both air and ground transportation., • Must be able to lift up to 50 lbs., • Must be able to remain in a stationary position 50% of the time in closed-area offices., • Must be able to move about inside and outside the office to access files, cabinets, safes, and install or remove computer-related equipment.

Why USAA? At USAA, our mission is to empower our members to achieve financial security through highly competitive products, exceptional service and trusted advice. We seek to be the #1 choice for the military community and their families. Embrace a fulfilling career at USAA, where our core values – honesty, integrity, loyalty and service – define how we treat each other and our members. Be part of what truly makes us special and impactful. We are proud to support active-duty military spouses. USAA roles may offer remote or hybrid flexibility for active-duty military spouses consistent with applicable policy and business needs. The Opportunity As a dedicated Sr. Field Auto Appraiser, you will within defined guidelines and framework responsible for the investigation, negotiation, evaluation and appraisal of vehicle damage claims for both repairable and total loss vehicles to ensure estimate accuracy in compliance with state laws and regulations. Accountable for delivering exceptional member service through setting appropriate expectations, proactive communications, advice, and empathy. This is a field-based role in the Los Angeles Metro area. Candidates who are willing and able to work in the West Los Angeles, Santa Monica and Beverly Hills area are encouraged to apply. What you'll do: With the use of digital tools, evaluates and appraise highly complex auto physical damage claims in accordance with the terms and conditions of the contract, corporate guidelines and state laws and regulations. Investigates claim damages including communicating with the insured, internal claims adjusters, and third parties/vendors. May require face-to-face interactions with members and third parties. Reviews facts of loss and vehicle damage to determine if subrogation opportunities exist and ensures all supporting physical damage documentation is in the claim. Demonstrates advanced knowledge of P&C insurance industry products, services, contracts, and internal processes/systems/procedures to ensure compliance with laws, regulations, and policy provisions. Reviews claims/suppliers for fraud indicators and refers to Special Investigations Unit for handling, if applicable. Maintains accurate and current claim file documentation throughout the claims process for complex claims. Maintains high standards of productivity through effective desk management, timely follow ups, and accurate mapping of repair plan and timeline for repair in support of fast and accurate claims adjudication. Responsible for reviewing additional damages received from repair facilities to either complete a supplement or triage to field provider method of inspection. May serve as a subject matter expert representative for disputed claims or trials. Serves as a resource to team members on escalated issues of a routine nature. Partners with vendors and internal business partners to facilitate the highest complexity claims resolution. May also involve external regulatory coordination to ensure appropriate documentation and compliance. Proactively provides policyholders with information regarding their coverage, repair estimate or total loss valuation, and claims/repair process while setting appropriate expectations. Supports workload surges and catastrophe (CAT) response operations as needed, including required on-call dates and potential evening, weekend, and/or holiday work outside normal work hours. May be assigned CAT deployment travel with minimal notice during designated CATs. Works various types of claims, including ones of higher complexity, and may be assigned additional work outside normal duties as needed. Ensure risks associated with business activities are effectively identified, measured, monitored, and controlled in accordance with risk and compliance policies and procedures. What you have: High School Diploma or General Equivalency Diploma. 3 years of auto appraising experience. Proficient knowledge of P&C insurance policy contracts and coverages, auto parts distribution process and claim appraisal process and procedures. Advanced working knowledge of estimating losses using CCC or similar estimating platforms. Demonstrated written and verbal skills to communicate with members, claimants, repair facilities, and other internal and external stakeholders. Acquisition and maintenance of insurance adjuster license within 90 days and 3 attempts. What sets you apart: 5 years of auto appraising experience. US military experience gained through military service or gained as a military spouse / domestic partner Physical Demand Requirements: May require the ability to operate a company vehicle within assigned territory. May require the ability to reach, handle, squat, bend, climb, and are keen as needed to complete inspections of damaged vehicles. May require the ability to work outdoors in inclement weather conditions; May be exposed to working in body shop and/or salvage yard environments up to 25% of the time. May be required to meet all USAA safe driving requirements including verification of driving record through MVR & possession of valid driver’s license. Compensation range: The salary range for this position is: $63,590 - $121,530. USAA does not provide visa sponsorship for this role. Please do not apply for this role if at any time (now or in the future) you will need immigration support (i.e., H-1B, TN, STEM OPT Training Plans, etc.). USAA will consider qualified applicants with a criminal history pursuant to the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if USAA is concerned about a conviction(s) that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Find out more about the Fair Chance Ordinance by visiting the Los Angeles County Office of Labor Standards and Enforcement website. Compensation: USAA has an effective process for assessing market data and establishing ranges to ensure we remain competitive. You are paid within the salary range based on your experience and market data of the position. The actual salary for this role may vary by location. Employees may be eligible for pay incentives based on overall corporate and individual performance and at the discretion of the USAA Board of Directors. The above description reflects the details considered necessary to describe the principal functions of the job and should not be construed as a detailed description of all the work requirements that may be performed in the job. Benefits: At USAA our employees enjoy best-in-class benefits to support their physical, financial, and emotional wellness. These benefits include comprehensive medical, dental and vision plans, 401(k), pension, life insurance, parental benefits, adoption assistance, paid time off program with paid holidays plus 16 paid volunteer hours, and various wellness programs. Additionally, our career path planning and continuing education assists employees with their professional goals. For more details on our outstanding benefits, visit our benefits page on USAAjobs.com Applications for this position are accepted on an ongoing basis, this posting will remain open until the position is filled. Thus, interested candidates are encouraged to apply the same day they view this posting. USAA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Overview: The Sr. Project Engineer role will oversee and execute the project controls and management of a multiple discipline, EPC project. Your main functions will include (but not limited to) responsibility for the full scope of the project such as direct support to a Sr. Project Engineer installed quantity monitoring, contract administration, project planning and scheduling, procurement, and project reporting. The Sr. Project Engineer role requires interfacing with all areas affected by the project including the client(s), engineering/design, subcontractors, distributors, equipment vendors, and the ongoing strategic communication with project management regarding the status of the project. Location & Travel Details: You can be based in any city or state in the U.S.. This is a traveling, project based position, up to 90% of the time. You have the potential to be placed on a project site located in any state throughout the US. You’ll spend 8-18 months on average per project. We offer designated per diem in addition to an excellent base salary to support and help you cover living expenses. This position is eligible for mobilization support (may include mileage reimbursement), and includes one longer weekend every four weeks for additional time at home. COMPANY OVERVIEW: MasTec Industrial, alongside its sister companies Casey Industrial and Phoenix Industrial, has been in operation since 1947. We serve a diverse clientele, including utilities, independent power producers, developers, and municipal utilities. Specializing in projects using natural gas, oil, biomass, and other combustible fuels, our team boasts over 30 years of expertise in the power industry. We provide EPC (Engineering, Procurement, and Construction) services and assist in project development. Our experience spans various systems for utility and industrial facilities, including simple and combined cycle plants, reciprocating engines, and waste-to-energy projects. MasTec Industrial delivers value throughout all project phases, from conceptual design to operations and maintenance. At MasTec Industrial, we are dedicated to delivering the highest quality, safety, and value in every project. We focus on attracting, developing, and retaining top talent within our organization. Our goal is to foster a respectful work environment where all employees feel valued, included, and empowered to become innovative leaders in the industry. The MasTec Industrial market sector is part of the MasTec Clean Energy & Infrastructure business segment. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. In addition to our industrial market sector; In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects and commercial buildings. Our renewables sector focuses on solar, wind and battery storage. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Responsibilities: ESSENTIAL JOB FUNCTIONS: • Represent in a professional manner in all client interaction activities., • Provide the client with contract required reports (weekly, monthly, schedule.), • Champion Corporate Safety Plan and help develop the site-specific safety plan., • Create quantity calculation formulas to accurately determine percentage of completed/installed materials., • Develop a process for the creation and review of work plans and work packages., • Provide support to ensure the site quality plan is communicated and all inspections and quality documentation is being completed on time and assembled for final turn over., • Manage the compilation, processing, and customer approval of daily labor timesheets., • Review and train people the correct usage of Job Safety Analysis (JSA’s), • Lead jobsite safety reviews, toolbox meetings, mass safety meetings, and safety training., • Track material deliveries and develop procurement status report., • Plan, schedule, and coordinate work groups on the jobsite., • Direct other to perform material takeoffs from drawings, specifications, and other contract documents., • Perform complex engineering calculations and technical drafting to support field operations., • Direct Field Engineers to gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use., • Review field issued purchase orders and subcontracts, prepare material buyout take offs from issued for construction drawings., • Direct home office performed procurement and subcontract administration functions., • Provide field support and supervise subcontractor operations., • Manage all project recordkeeping and correspondence functions including daily reports, photographs, requests for information (RFIs), submittal, transmittal, memorandums, and other contract required correspondence., • Create and closely monitor project controls such as productivity tracking including Average labor rate, indirect scheduling, equipment schedule and log, risk, and opportunity log, etc., • Create and maintain master project schedule., • Generate change orders and as-built data to be reviewed by the Project Manager., • Drive the planning process through the master schedule, 6-week, 3-week, 1-week, and manpower curves., • Administering Accounting/Job Costs/Work in Progress (WIP) Updates: Learn and Assist the Project Manager with these activities., • Lead the budgeting process of taking the Estimate and converting it to the Standard Phase codes., • Alert Project Manager and Home Office of trends regarding labor, material, subcontractor and equipment costs., • Accurately manage the cost forecasting process for entire project (labor, materials, subcontractors, equipment.), • Identify trends and suggest corrective actions when needed., • Establish the cashflow forecast and curve to ensure positive cashflow for the project., • Act as primary company representative in the absence of or as directed by Project Manager., • Know all of the provisions, terms and scope of the Prime contract., • Develop and prepare Schedule of Values and all Invoices to customer., • Manage, lead direct reports, and mentor. SUPERVISORY: • Support a crew of 100 people for short periods if needed., • Lead/Direct a team of 1 or more Field Engineers., • Oversee and manage all the field office staff, which could include engineers, office manager, document control, schedulers, procurement, warehouse, and other support personnel on the project. Qualifications: EDUCATION AND WORK EXPERIENCE REQUIREMENTS: • Bachelor’s degree in engineering, construction management, or related., • 7 plus years’ experience as a Field Engineer or similar role. KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED: • Be knowledgeable of MIC Health and Safety programs and project specific regulations., • When on-site, actively participate in daily toolbox meetings with crews and subcontractors., • Set a personal example of safe behavior., • Ability to read, analyze and identify discrepancies on engineering plans, specifications, and contract documents., • Provide constructability and cost saving alternatives at design phase of project., • Ability to freely access all points of a construction site in wide-ranging climates and environment., • Highly motivated, with a demonstrated passion for excellence and taking initiative., • Strong work ethic, willing to do what it takes to get the job done right the first time., • Demonstrated commitment to ethics and integrity., • Passion for safety, with the ability to help us ensure that nobody gets hurt., • Leader with the ability to delegate work and provide support as needed to meet deadlines, goals, and objectives., • Willing to travel extensively and relocate to the next project location for an extended period (typically 6-12 months.), • Other may duties may be assigned, • Maintain in-depth relations with all members of their team and your supervisor. PHYSICAL DEMANDS: • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions., • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks., • Stamina to perform this task repetitively and continuously for several hour intervals., • Uncontrolled environmental conditions: Constant change in weather and site conditions., • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises., • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)., • Move in and around confined, cluttered, and uneven areas., • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights., • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings., • Visualize objects in three dimensions from drawings., • Keep good balance and work at heights., • See well (either naturally or with correction)., • Hear well (either naturally or with correction.), • Coordinate the use of eyes, hands, and feet. What's in it for you: Financial Wellbeing • Competitive pay of $130,000 - $160,000 per year with ongoing performance review, project completion bonus opportunity and merit increases., • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Flexible spending account (Healthcare & Dependent care) Health & Wellness • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance Family & Lifestyle • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Employee Assistance Program Planning for the Unexpected • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer/Disability/Veteran. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at _. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-MH1 #LI-Onsite Appcast (For Export): #appalert

About the Role: The Civil/Structural Design Engineer will be responsible for facility level design and analysis of solar & BESS energy facilities along with review and revision of commercial and utility plan sets for photovoltaic (PV) and Battery Storage (BESS) system installation and site survey sketches. Plan sets include site plans, geotechnical reports, site surveys, erosion control, environmental impacts, foundation layouts, BOM’s, structural details, material take-offs, and equipment specifications. They will work closely with customers and other engineering and design team members and contractors to coordinate the overall design packages and requirements and then help transition the designs to the field where they will ensure the successful construction and energization of the project. Company Overview Since 1990, CSI Electrical Contractors, Inc. (CSI Electric) – a subsidiary of MYR Group Inc. – has been a leader in highly technical and innovative electrical design and construction. Our team of consultants, engineers, project managers, and professionals deliver the best solutions to our customers’ greatest electrical engineering and construction needs. We have the resources and expertise to manage any commercial, industrial, or one-of-a-kind challenge in aerospace, biotech/pharmaceutical, education, healthcare, entertainment, hospitality, manufacturing, and retail. Our services include electrical construction, technology solutions, and alternative energy where CSI Electric is regarded as a premier provider of energy development, installation, and maintenance. Whether your project entails mission-critical power, energy production, or a simple space upgrade, CSI Electric offers unmatched expertise in electrical, energy, and technology solutions. We’re proud to celebrate more than 30 years of commitment to do all things with excellence for our customers, ourselves, and our craft. We Build Better. Essential Functions • Technical responsibility for organizing, reviewing, interpreting, researching, executing, coordination, and commenting on project pursuit and design packages by working closely with other engineering and design team members to coordinate overall design packages., • Is responsible for all aspects of the design including grading, structure design verification, plan & profile drawings, foundation design, material & construction specifications, and all associated calculations. The analysis of solar & BESS energy projects involves working across a range of responsibilities, including: • Civil/Structural plant design understanding of power and distribution systems (Low, Medium and High Voltage) in order to provide reviews & comments., • Analysis of applicable studies, including topography surveys, geotechnical reports, Alta Surveys, environmental impact surveys, corrosion analysis, hydrology reports, etc., • Design development & optimization, field construction and installation means & methods, • Developing/contributing detailed design concepts for solar PV and BESS system design, • Provide long term detailed design, optimization, and constructability support, • Develop, update and use civil/structural engineering calculation tools to size equipment and material based on project requirements., • Independent engineering report writing and evaluation, • Calculation reviews of pressures, loads, & stresses, • Reviews of commercial agreements including Power Purchase Agreement (PPA), Interconnection Agreements, Service Contracts, Facility Studies This includes, but is not limited to the following: • Work alongside the Business Development, Estimating, and Engineering teams to create preliminary site layouts and landscape plans for project proposals., • Provides engineering support for proposals, estimating, procurement and construction., • Provides technical support to personnel/cross functional teams supporting the assigned project by performing advanced level engineering tasks, calculations, data analysis, and studies as needed to develop preliminary detailed scopes of work on large and small projects., • Assess the equipment technology and expected use case of the proposed projects to optimize the system design with the optimal technology, material, augmentation, and asset mix, • Assist with design and optimization of BESS and solar PV systems to meet project requirements, minimize cost and propose value., • Convey results and findings by means of discussions, graphic-based presentations, and project documentation., • Demonstrate familiarity with the mounting and installation of various typical pieces of equipment used in the proper design and installation of renewable energy projects., • Assistance with planning and/or obtaining permits and regulatory approvals., • Review and approve material specifications and equipment vendor drawings on major equipment from manufacturers., • Conducts project detailed design and QA/QC reviews for completeness and accuracy of internal and external design documents that align with our customer requirements, CSI’s standards, and industry best practices., • Perform site visits as needed to verify that construction is in agreement with engineering design drawings, including preparatory meetings, and QA/QC., • Prioritize, multitask, and follow through on assigned tasks and projects with minimal supervision., • Assure proper documentation of technical data generated for the assigned projects and/or tasks are consistent with engineering best practices and policies. Other Duties: Works independently with direction from Director of EPC Engineering. Coordinate with other engineering disciplines, Project Managers, Directors and Operations personnel to successfully deliver design projects. Create and update database of design records and equipment for future reference. Attend mandatory training sessions on new products, installation methodology, and safety. Initiates and maintains contacts with key engineers in other companies, suppliers and industry associations to maintain their technical expertise. About You: Qualifications • Preferred graduate of four-year college or university with Bachelor of Science in Civil/Structural Engineering or related Engineering program. Strongly preferred the degree is from a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum., • Possess a minimum of 5 to 10 years of related work experience (Can be a combination of trade & relevant work experience)., • Competency with civil/structural system sizing at all levels, experience with Utility and/or Commercial scale renewable EPC projects, independent engineering and nuances of design, and analysis of operational project data and performance., • Experience in utility-scale solar/PV projects, highly preferred. Knowledge/Skills/Abilities • Advanced understanding of discipline specific technical designs, engineering principles, business standards, practices, procedures, and product / program requirements., • Experienced in the practice of researching engineering and design issues, evaluating alternatives, making sound recommendations, and preparing and presenting recommendations., • Ability to apply engineering theories and principles to review and evaluate civil/structural drawings to determine if the design meets the contractual requirements, construction best practices and budget., • Has a firm understanding of the principles of Project Management., • Proficiency in MS Office Suite of products, AutoCAD 2D, Blue Beam, L-pile, Google Earth, Risa and other web-based software applications. Knowledge of PLSCADD a bonus., • Proactive attitude, showing initiative and the ability to work independently as well as with a team., • Strong analytical problem-solving skills., • Ability to prioritize, multitask, and follow through on assigned tasks and projects with minimal supervision., • Strong organizational and communication skills, both written and verbal, • Ability to work in a fast-moving environment while maintaining a positive attitude in stressful situations and adapt to changing job requirements., • Positive attitude, showing customer focus and the initiative and ability to work independently Physical Demands • Frequently works outdoors on uneven surfaces., • May be required to sit or stand for long periods of time., • May be required to stoop, bend, and crouch., • Ability to travel up to 30%. Work Environment • Works in a climate-controlled environment at least 50% of the time., • When in the field, may work in varying weather conditions: hot, cold, and wet conditions., • When in the field, will work in areas with large industrial equipment subject to high noise levels., • May occasionally work in areas with hazardous chemicals., • This position will require both office and field time with the ability to work remotely. What We Offer: Compensation & Benefits • Salary $85,000-$115,000/ year, • Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. CSI reserves the right to adjust ranges depending on the selected candidate's qualifications., • Amazing Company Culture - We have a culture of trust, teamwork, performance, and commitment that drives our success., • Competitive Salaries - We pride ourselves on offering above-average industry salaries based on talent and experience., • Annual Paid Time Off starting at 15 days plus 9 paid Holidays., • Generous 401(k) Plan with 100% match up to 6%. Immediate vesting and Annual profit-sharing potential., • Company-paid life, and accidental death & dismemberment., • Employee Assistance Plan (EAP)., • Various voluntary plans are available, including short- and long-term disability, supplemental vision, accident, hospital and critical illness, and additional voluntary life insurance plans for employees and dependents., • Company medical and dental insurance for you and your family. CSI pays 100% for Employee and 75% of dependent coverage premium for the selected plan(s) This position will remain posted for a minimum of three days. The posting will remain active and automatically extend until the vacancy is filled. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-855-635-1321. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #applow LinkedIn Workplace: #LI-Onsite

• TEAM PAY THAT LEADS THE PACK - Earn up to $220,000 per team annually*, • BIG BONUS. BIGGER START. - Up to $25,000 sign-on bonus available for a limited time*, • MODERN FLEET. MAXIMUM MILES - Average truck age just over 1 year - no inward-facing cameras We know being a driver is tough. That's why Transco Lines makes sure you not only get great pay, but also the home time to help you enjoy it. You'll always get the utmost respect, appreciation, and support - that's been the Transco standard since 1984. Based in Russellville, AR with a full-service maintenance terminal in North Little Rock, Transco operates 470+ power units and 1,300 dry van trailers. The fleet is built around ultra-modern assets, JIT-focused freight, and a culture that recognizes and celebrates its drivers. Pets welcome. No inward-facing cameras. An open-door policy that goes all the way to the President. That's Team TLI. • Team pay built for high performance. Teams can earn up to $220,000 annually together, with base CPM ranging 74-92CPM depending on experience. Strong miles mean strong income - Transco's pay structure is built to keep rewarding both., • Scheduled raises and mileage bonuses. You'll receive a guaranteed raise at your 1-year anniversary. Teams that exceed 20,000 miles in a month also earn an additional 5CPM bump - built-in performance rewards that stack over time.*, • $15,000 Sign-On Bonus per team - available now. Qualified teams may receive a $15,000 sign-on bonus* for a limited time, depending on location., • $25,000 Sign-On Bonus per FULLY ENDORSED team - available now. Qualified fully endorsed teams may receive a $25,000 sign-on bonus* for a limited time, depending on location., • Great home time. Real flexibility. Get home as often as weekly, or stay out longer to stack more miles and income. Transco gives team drivers the flexibility to run on their terms.*, • Modern trucks built for the long haul. The fleet averages just 1 year and 2 months old - ultra-modern equipment designed for high-mileage team running. No inward-facing cameras. Full-service maintenance terminals available when you're in the area., • Don't have a co-driver yet? Transco can work to help match qualified drivers looking for a team partner. Talk to a recruiter for details., • A culture that recognizes achievement. Transco celebrates top performers through company-wide nominations and recognition - because drivers who produce deserve more than silence., • Pet-friendly on the road. Bring your four-legged co-pilot along for the ride., • Driver referral program. Refer qualified drivers and earn extra cash when they join the team., • Open-door policy - all the way to the top. Walk into any terminal, any office, and talk to anyone - including President Terry Wallace. That's Transco's open-door culture in practice. All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid CDL A license, • Minimum of 6 months of verifiable OTR tractor-trailer experience, • Hazmat and Doubles endorsement required for select positions; preferred for all, • Must meet DOT and Transco Lines requirements

Job Description Plumber – Job Summary We are seeking an experienced Plumber to install, maintain, troubleshoot, and repair plumbing systems at various client locations. The ideal candidate will have strong knowledge of plumbing systems, codes, tools, and safety procedures and be comfortable working independently. Responsibilities: • Install, repair, maintain, and test pipes, fittings, valves, fixtures, water heaters, gas lines, drainage, and sprinkler systems., • Diagnose plumbing issues and complete repairs based on work orders., • Read and interpret blueprints, diagrams, and specifications., • Install and repair plumbing fixtures and equipment, including sinks, toilets, water heaters, and kitchen equipment., • Perform inspections, preventive maintenance, and emergency repairs as needed., • Maintain accurate records of materials and labor., • Maintain company tools, equipment, and inventory., • Travel between client worksites and respond to service calls when required., • Follow all safety procedures and maintain clean, safe work areas. Qualifications: • Minimum 3 years of plumbing trade experience., • California Journeyman Plumber license preferred., • Backflow Certification preferred and may be required within 12 months., • Valid California driver's license and insurability., • Strong troubleshooting and problem-solving skills., • Ability to read blueprints and understand plumbing codes., • Ability to work independently and as part of a team., • Basic computer and email skills., • Professional appearance and strong communication skills. Physical Requirements: • Ability to regularly lift, carry, push, or pull up to 50 lbs. and occasionally up to 100 lbs., • Ability to stand, walk, climb, bend, kneel, reach, and work from ladders, scaffolds, and lifts., • Comfortable working indoors and outdoors in varying temperatures and around dust, fumes, chemicals, gas lines, and other job-site hazards., • Frequent local travel between worksites is required.\nCompany Description We specialize in hiring in all areas of warehouse, manufacturing, production, light industrial, clerical, accounting, customer service and any skill trade positions including management. Ensuring that clients get the best match possible for each open position. We specialize in hiring in all areas of warehouse, manufacturing, production, light industrial, clerical, accounting, customer service and any skill trade positions including management. Ensuring that clients get the best match possible for each open position.

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Head Mechanic, you will service and maintain our fleet of state-of-the-art, high performance, high speed electric go karts. Duties and Responsibilities • Perform opening track and kart repairs and performance checks, • Maintain kart performance throughout the day, • Maintain track and facility appearance and functionality, • Keep accurate documentation of repairs, parts inventory, and special projects, • Responsibly maintain supply of tools and machinery, • Respond to emergency situations as they arise, • Ensure that the pit, kart shop and track areas remain clean and safe, • Assist the track crew with track operations in limited situations, • Perform specific facility cleaning and maintenance duties as assigned by management, • Perform closing duties to secure the pit and track and prepare for the following day's operation, • Ability to define problems, collect data, establish facts, and draw valid conclusions. Job Requirements • Must be at least 18 years of age, • High school diploma or general education degree (GED); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience., • Provide proof of identity and eligibility to work in the United States, • Weekends are a must!

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Mechanic, you will service and maintain our fleet of state-of-the-art, high performance, high speed electric go karts. The right candidate will have a track record of mechanical repair experience, preferably in the golf kart, go kart, motorcycle, or motorsports field, and will be self-motivated and be able to work in a fast-paced environment. Is this you? Duties and Responsibilities: • Perform opening track and kart repairs and performance checks, • Maintain kart performance throughout the day, • Maintain track and facility appearance and functionality, • Keep accurate documentation of repairs, parts inventory, and special projects, • Responsibly maintain supply of tools and machinery, • Respond to emergency situations as they arise, • Ensure that the pit, kart shop and track areas remain clean and safe, • Assist the track crew with track operations in limited situations, • Perform specific facility cleaning and maintenance duties as assigned by management, • Perform closing duties to secure the pit and track and prepare for the following day's operation, • Ability to define problems, collect data, establish facts, and draw valid conclusions. Job Requirements: • Must be at least 18 years of age, • High school diploma or general education degree (GED); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience., • A Background Check is required prior to employment, • Provide proof of identity and eligibility to work in the United States, • Weekends are a must! Physical Demands: • Standing over 2/3 of time, • Walking over 2/3 of time, • Lifting is required None 1/3 2/3 2/3 Up to 10 pounds ||||X| Up to 25 pounds |||X|| Up to 50 pounds ||X||| More than 50 pounds ||X||| **By apply to this position, you agree that you can preform the duties listed above.

Job Description Global Data Analyst Dermalogica continues to lead the professional skin care industry with distribution in over 80 countries. Known worldwide as the premiere Skin Therapist’s choice for offering the most respected professional skin care line, we are also recognized for our renowned postgraduate education. Our entrepreneurial spirit, hands-on environment and fast-paced culture encourages employees to be their best, bringing innovative solutions to reach the skin care professional and consumer. We are highly energetic, passionate, and results oriented. You will find that Dermalogica is a very special place, with tremendous opportunities ahead for us, all building upon a record of achievement. In 2015 Dermalogica was acquired by Unilever, one of the world’s largest and most successful consumer goods companies. While Dermalogica continues to operate as a stand-alone entrepreneurial business, we now have enviable access to cutting edge capabilities and resources to help us win in our markets. The challenge is to build on the legacy of our brand, our experienced team and our industry leading education to deliver profitable growth. One of the key elements for our success, and critical for our growth, is bringing in the right people to join our team. We invite you to come and make a difference and grow your career with the global leader in skin care. * Global Data Analyst – Role Description: The Global Data Analyst takes ownership of Dermalogica’s Global and International reporting and analytics ecosystem across all markets and channels. This role is responsible for maintaining, enhancing and occasionally building dashboards in Tableau and Power BI, working with IT and the market teams to ensure data quality and accuracy across global sell-in and sell-out data sets. Success in this role means empowering stakeholders across the business with reliable, timely insights. Our analytics agenda is moving at pace and this role is central to achieving our goal of industry-leading, globally consistent reporting. Key priorities include establishing a standard data model within a future-proofed environment, continuing to develop and consolidate analytic tools in Power BI, ensuring data integrity and governance across markets, and building analytical capability across the wider business. We need an inquisitive individual who can drive this agenda forward as our global footprint and channel mix continue to expand. Key Job Responsibilities: • Ownership, Development & Maintenance of Reports & Dashboards (Power BI), • Own and maintain all global and international reports and data flows in Power BI – including proactive troubleshooting, validating data quality and accuracy, and updating dashboards with relevant new information (e.g. new innovations, markets, channels)., • Ensure dashboards are kept up to date with manual data reports (such as Amazon US sell-out data, provided in an excel format). As part of this, review current distribution of reports in Excel and determine what can be simplified/automated in Power BI., • Take full ownership of sell-out data integrity and act as the primary bridge between business users and IT for sell-in data queries. Drive ongoing simplification and process streamlining across all reporting., • Provide ad hoc analytical support for global departments, market GMs and senior leadership, responding to dashboard queries and delivering timely, accurate data across markets and channels., • Ensure global and regional departments have standardized, user-friendly analytical tools and dashboards for self-sufficient performance management – including monitoring usage, retiring unused workbooks, and keeping all reports accessible in the proper formats., • Design and build new Power BI dashboards end-to-end – from data engineering and modelling through to visualization – with a focus on question-led, actionable insights and performance benchmarking (vs. target, vs. prior year, vs. market)., • Data Analytics, • Provide monthly innovation tracking updates across markets as input to global performance calls, analyzing launch performance vs. expectations and identifying trends by region and channel., • Build analytical models to assess how new business opportunities impact existing channels across markets, highlighting potential risk factors and identifying growth opportunities based on cross-market performance and sister brand insights Experience and Competencies Required: • Bachelor’s degree in Computer Science, Information Systems, Data Science, Business Analytics or another related field., • 3-5 years of previous analytical experience, • Proficient in SQL, Power BI, and Excel, with hands-on experience building visualizations from large data sets and multiple data sources. Additional BI/ETL tools, automation skills (Python, Power Automate), or programming knowledge are a plus., • Self-motivated, detail-oriented, and highly organized with a willingness to learn autonomously, • Tech savvy with an open mindset about learning new technologies, systems, and tools, • Strong ownership mindset with excellent initiative and follow-through; a track record of proactively identifying opportunities and driving end-to-end solutions in a fast-paced environment, • Analytical mindset with the ability to dive deep into complex, ambiguous problems, perform root cause analysis, and ask the right questions to deliver solution-focused outcomes, • Courage to challenge established norms in a constructive way and drive change The expected base salary range for this position is $80K to $100K. The exact base salary is determined by various factors including experience, skills, education, and budget. This position is also eligible for participation in the company discretionary bonus plan, based on personal performance and company results. The role will be based out of the corporate headquarters in Carson, Los Angeles. It will be hybrid with applicable on-site work guidelines. Student visas and H1B sponsorships will not be considered at this time. Apply now and become a team member for the preeminent global leader in skincare providing a competitive and comprehensive health benefits package including life/accident/disability insurance, wellness programs, paid family leave, domestic partner benefits, education/training programs, product allowances, fitness reimbursement, 401(k) matching, and a host of other great perks. Dermalogica is an equal opportunity employer committed to fostering an inclusive culture where all employees are valued, supported, and empowered to succeed.

Job DescriptionWhy This Role Matters Western Truck Exchange is hiring an experienced Diesel Mechanic to diagnose, repair, and maintain commercial trucks in our Los Angeles shop. This role is for someone who can work independently, document repairs clearly, and take pride in fixing trucks correctly the first time. We are building a stronger shop culture with professional standards, better support, clear communication, and real opportunities for technicians who want to grow their skills. What You Will Work On • Perform preventive maintenance inspections, oil changes, chassis lubrication, and related truck maintenance., • Inspect trucks for worn, damaged, unsafe, or failing components and communicate findings clearly., • Diagnose and repair diesel engines, gasoline engines when applicable, drivetrain and powertrain components, brakes, suspension, HVAC, electrical systems, hydraulic systems, air systems, instruments, gauges, and related truck systems., • Repair components such as differentials, transmissions, driveshafts, PTOs, wheel ends, turbochargers, fan clutches, injectors, fuel system components, ECMs, ECUs, and sensors., • Use diagnostic tools, service information, scan data, and shop support to confirm faults before replacing parts., • Road test vehicles as needed to confirm concerns and verify completed repairs., • Document the work performed, parts needed, findings, and repair status in a clear and accurate way., • Maintain safe work habits and keep your work area organized.What We Are Looking For, • 5+ years of practical experience in mechanical inspections, diagnostics, and repairs., • High school diploma or equivalent., • Valid driver's license; must have or be able to obtain a CDL., • Proficiency with shop tools and hand tools; ability to supply a basic set of hand tools as applicable by role/level., • Basic computer skills for maintenance systems, repair documentation, and diagnostic tools., • Reliable attendance, punctuality, and a professional approach to safety and quality., • Comfortable working in a non-climate-controlled shop environment., • Willingness to travel as needed to customer yards and training sites.Strongly Preferred, • Experience with CAT and Cummins diagnostics and repairs., • Experience with Allison transmission maintenance and rebuild-related services., • Experience working on International and Mitsubishi Fuso medium-duty platforms., • Experience using diagnostic software and electronic service information., • Vocational, technical, or OEM certifications.What You Get in Return, • Opportunity to earn $100,000+ annually with a competitive wage system., • Profit sharing plan., • Quarterly incentive opportunities through our Rapid Improvement Plan., • Paid training., • Employee referral bonus., • CDL reimbursement support., • Uniform allowance., • Employee discount and paid time off., • A certified repair environment for CAT and Cummins repairs and Allison maintenance/rebuild services.What To Expect During Hiring, • Complete and submit an application., • Participate in interviews to confirm fit both ways., • Complete background check and drug screening requirements., • Selected candidates may receive a brief technical follow-up questionnaire to indicate proficiency across key systems and repairs.About Western Truck Exchange Western Truck Exchange is the leading retailer of used and new medium-duty commercial trucks in Los Angeles. Established in 1922, we are one of California's oldest licensed dealerships and an authorized International dealer. Our Los Angeles dealership includes a commercial truck repair facility that supports fleets, municipalities, contractors, and local businesses that rely on their trucks every day. We are fully certified for CAT and Cummins repairs and qualified to provide Allison maintenance and rebuild services. We believe our people are the driving force that keeps our customers and the transportation industry moving forward. We foster a culture of respect, appreciation, and opportunity, recognizing every employee's contribution to our shared success. We are an equal opportunity employer and prohibit discrimination/harassment in accordance with applicable laws.

Job DescriptionL.A. Fleet Care – Sun Valley, CA Pay: $28.00–$50.00 per hour, depending on experience Schedule: Full-Time | Monday–Friday | 8:00 AM–5:00 PM Overtime Available Join a Growing Fleet Maintenance Team L.A. Fleet Care is a family-owned fleet maintenance and diesel repair company providing both mobile and in-shop services throughout Southern California. We are seeking experienced Diesel Technicians and Senior Diesel Technicians to join our growing team. Whether you're an experienced diagnostic technician or a skilled mechanic looking for career growth, we offer stable work, competitive pay, modern diagnostic equipment, and opportunities for advancement. What You'll Do: • Perform preventive maintenance services on heavy-duty trucks and commercial fleet vehicles., • Diagnose and repair diesel engines, electrical systems, and mechanical components., • Perform DOT and BIT inspections., • Service brakes, steering, suspension, drivetrain, HVAC, and aftertreatment systems., • Diagnose and repair DPF, DEF, and SCR systems., • Utilize diagnostic software such as Cummins INSITE, JPRO, IDSS, or equivalent systems., • Perform mobile service and roadside repairs as needed., • Complete major repairs including engines, transmissions, and complex electrical diagnostics (Senior Level)., • Maintain accurate repair documentation and service reports., • Mentor junior technicians and support shop operations (Senior Level)., • Maintain a clean, safe, and organized work environment. QualificationsDiesel Technician: • 3+ years of heavy-duty diesel repair experience preferred., • Experience performing PM services and mechanical repairs., • Basic to intermediate electrical diagnostic skills., • Familiarity with aftertreatment systems., • Ability to work independently and produce quality repairs.Senior Diesel Technician:, • 6+ years of heavy-duty diesel diagnostic and repair experience preferred., • Advanced electrical troubleshooting and diagnostic experience., • Experience performing major engine and drivetrain repairs., • Leadership mindset with the ability to mentor technicians., • Strong knowledge of commercial truck systems and fleet maintenance operations.Preferred Qualifications:, • CDL Class A (preferred but not required)., • OEM or factory training/certifications., • Clean Truck Check certification., • Experience with Peterbilt, Freightliner, Kenworth, Volvo, Mack, International, Isuzu, Ford, or similar truck brands., • Welding experience., • Hydraulics and liftgate repair experience. Benefits: • Competitive hourly pay, • Paid vacation, • Paid holidays, • Paid sick leave, • Overtime opportunities, • 401(k) retirement plan, • Accident insurance, • Life insurance, • Sponsorship available for eligible technicians, • Career advancement opportunities Why Join L.A. Fleet Care? • Family-owned company with a team-oriented culture., • Stable Monday–Friday schedule., • Growing fleet customer base., • Modern diagnostic equipment and tools., • Opportunity to work both in-shop and in the field., • Long-term career growth opportunities. Apply Today Phone: 818-421-3126 or 818-582-4582 Email: francis@lafleetcare.com

Job DescriptionBenefits/Perks • Flexible Schedule, • Competitive Pay, • Local Work Job SummaryWe’re looking for a hardworking swimming pool maintenance technician to join our team! All of our maintenance technicians receive training by our company, no matter the amount of previous experience, to ensure our business expectations are met. Once training is completed, you’ll receive a local swimming pool route that has been mapped out for ease and efficiency. Each week, you will follow this route in your own truck and service the swimming pools and/or spas. The ideal person for this job is a self-motivated, reliable team player and a problem solver who has some prior maintenance experience. If you’re looking for a job at a fast-growing company that really values its employees, reach out to us today! Responsibilities • Conduct routine maintenance on swimming pools and/or spas to make sure they’re clean and operating efficiently, • Report any needed repairs to our office, • Net pool surfaces, brush walls, vacuum pools, test water, empty skimmer and pump baskets, add needed chemicals, • Keep customers gates shut/locked to prevent unnecessary accidents, • Keep a record of completed pools, added chemicals, and turn in time sheets weekly, • Develop and execute preventative maintenance measures to keep the equipment operating efficiently and prevent any safety risks, • Handle additional maintenance tasks as neededQualifications, • Prefer High school diploma/GED or equivalent, • Prefer some maintenance experience, • Must speak English, • Must have drivers license and insurance, • Must have own truck, • Prefer knowledge of swimming pools, swimming pool equipment and chemicals, • Prefer understanding of chemical safety, • Excellent work ethic, communication skills, time management skills, and attention to detail

Job DescriptionDescription: SUMMARY: Emergency Vehicle Group, Inc. is a leading emergency vehicle dealer and service center for fire apparatus, ambulances, command and specialty vehicles that is adding to our service operations. We are seeking highly skilled heavy truck mechanic to work on fire apparatus, ambulances and other emergency vehicles. Experience with air brakes, heavy truck components, hydraulics, water pumps, and aerial devices, complex electrical systems is expected. Please submit resume, employment and salary history. Qualified Applicants Only. ESSENTIAL JOB FUNCTIONS: • Repair and maintain various types of emergency vehicles, such as pumpers, aerials, ambulances and other vehicles., • Perform preventative maintenance and inspections on heavy truck chassis and fire components., • Major repairs on fire pumps, aerials, hydraulic systems, air brakes and electrical systems., • Travel to customers sites for repairs as needed., • Perform work as directed by Service Manager, • Other duties as assigned and can vary daily, • Ensures shop cleanliness and maintenance on a regular basis., • Processes and tracks repair orders., • Performs road tests on vehicles in order to assure roper operating levels., • Operates computer to document repair work and maintenance on a daily basis., • Monitors and advises all safety related issues related the shop area, vehicles and wherever maintenance is being performed., • Available to perform emergency repair work after hours including nights, weekends and holidays.Requirements:, • Reads and follows simple to complicated instructions, schematics and other information contained in repair manuals or the diagnosis and repair of fire and EMS vehicles and equipment., • Performs calculations and works with numbers to solve problems., • Reads and understands reference books and complicated procedures and manuals., • Pays attention to detail while ensuring crews observe safety precautions., • Knowledge of safety hazards and precautions., • Appropriately records repairs and parts used. PREFERRED EDUCATION, EXPERIENCE AND CERTIFICATIONS: • High School Diploma or GED and 2+ year mechanical repair and maintenance work or equivalent combination of education and experience., • Class B or A CDL Driver’s License, • ASE Mechanic certification preferred, • Must obtain Emergency Vehicle Technician (EVT)certification within 1 year of hire date., • Fabrication and Welding Experience a Plus but not required. Experience with Mig, Tig welding and any welding certification as well as a background in metal fabrication., • Must pass pre-employment drug screen, physical, criminal background and MVR check. ENVIRONMENTAL FACTORS AND CONDITIONS / PHYSICAL REQUIREMENTS: • Work is performed in an automotive repair shop and on customer’s sites., • May be subject to bending, twisting, reaching, kneeling and lifting such as retrieving and replacing materials, supplies and inventory or when performing preventative maintenance and repair of vehicles and heavy equipment., • May be subject to exposure to extreme weather conditions, hazardous chemicals and fumes common to automotive repair shops., • Must be able to lift up to 50 pounds. EQUIPMENT AND TOOLS UTILIZED: • Operates various emergency vehicles and equipment on an as-needed basis (for testing purposes), • Operates volt ohm meter, ampmeter, pressure gauges, nozzle and valve repair kits, calibrating tools for engines, rakes, micrometers and dial calipers, welders, grinders, torch, brazing rod, precision gauges, inspection and diagnostic equipment., • Must have own tools.

Job DescriptionBenefits/Perks • Flexible Scheduling, • Competitive Compensation, • Career Advancement OpportunitiesJob Summary We are looking for a skilled and experienced Plumber to join our team! In this role, you will perform diagnostics, service, and installation of plumbing in residential and light commercial environments. You are a Plumber with a commitment to quality in all the work you do. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities • Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, soldering, brazing, or welding equipment, • Install pipe assemblies, fittings, valves, appliances such as dishwashers or water heaters, or fixtures such as sinks and toilets, using hand or power tools, • Plan the layout of plumbing, using drawings, • Perform maintenance of water supply systems, • Install and maintain gas and liquid heating systems, • Professionally interact with customers and clearly communicate work orders and statuses Qualifications, • Minimum 2 year of professional experience, • Strong knowledge of Sales, • An HIS license is preferred., • Ability to handle plumbing tools and equipment

Job DescriptionWhy This Role Matters This is not a desk-only supervisor role. Western Truck Exchange is hiring a hands-on diesel foreman who can lead advanced diagnostics, direct workflow, coach technicians, and keep repair quality high across the shop. You will be the senior technical resource on the floor. Your job is to help determine the correct repair path, assign work to the right technician, remove production delays, and make sure trucks are repaired correctly the first time. You will have real authority over dispatch, repair quality, technician coaching, and staffing recommendations, with support from Service and Parts leadership to remove bottlenecks involving parts, approvals, tooling, scheduling, and technical support. What You Will OwnDiagnostics and Technical Direction • Serve as the shop's senior diagnostic resource for diesel truck repairs., • Review incoming repair work, identify the likely repair path, and confirm next steps before work stalls., • Perform advanced diesel engine diagnostics, electrical troubleshooting, and driveability analysis., • Use OEM service information, diagnostic software, scan data, service history, and AI-assisted diagnostic tools to improve root-cause accuracy., • Step in when a technician needs a higher level of technical direction or when a job is not progressing correctly.Shop Floor Leadership and Dispatch, • Assign jobs based on technician skill level, workload, repair complexity, parts availability, and customer commitments., • Lead daily production conversations so technicians, advisors, and parts personnel understand the priorities for the day., • Monitor open repair orders, promised times, approvals, parts status, and delayed work throughout the day., • Walk the floor regularly to identify roadblocks early and keep production moving., • Communicate priority changes quickly when a job needs escalation, reassignment, rescheduling, or additional support.Quality Control, Documentation, and Staffing, • Review completed repair orders for accurate notes, confirmed repairs, and completed road tests when required., • Push for clear root-cause documentation so future diagnostics, warranty support, and customer communication are stronger., • Enforce a no-comeback repair mindset and redirect failed quality checks immediately., • Help recruit, interview, onboard, coach, and evaluate technicians., • Recommend staffing changes when needed so the shop has the right people to perform quality repairs.What We Are Looking For, • Valid Class A CDL, or willingness to obtain one while employed, so tractors can be road tested as needed., • 5+ years of medium-duty or heavy-duty truck repair experience., • Strong diesel diagnostic ability, technical judgment, and electrical troubleshooting skills., • Ability to lead technicians without losing credibility on the shop floor., • Strong organization and communication skills with technicians, advisors, parts, and management., • Ability to speak Spanish fluently., • Ability to road test vehicles as needed to diagnose concerns and verify repairs.Strongly Preferred, • Dealership or fleet shop leadership experience., • Familiarity with OEM warranty processes and repair documentation standards., • Experience with CAT, Cummins, Allison, International, or Mitsubishi Fuso platforms., • Comfort using CDK or similar dealership management systems., • Experience improving shop workflow, dispatch discipline, technician productivity, or repair quality.What You Get in Return, • Competitive compensation based on experience., • Profit sharing plan., • Quarterly incentive opportunities., • Paid training and development support., • Employee referral bonus., • CDL reimbursement support, as applicable for renewals, endorsements, or qualifying requirements., • A visible leadership role where your technical skill and judgment will be respected.About Western Truck Exchange Western Truck Exchange is the leading retailer of used and new medium-duty commercial trucks in Los Angeles. Established in 1922, we are one of California's oldest licensed dealerships and an authorized International dealer. Our Los Angeles dealership includes a commercial truck repair facility that supports fleets, municipalities, contractors, and local businesses that rely on their trucks every day. We are fully certified for CAT and Cummins repairs and qualified to provide Allison maintenance and rebuild services. We believe our people are the driving force that keeps our customers and the transportation industry moving forward. We foster a culture of respect, appreciation, and opportunity, recognizing every employee's contribution to our shared success. We are an equal opportunity employer and prohibit discrimination/harassment in accordance with applicable laws. Next Step Apply with your resume. Qualified candidates will be contacted for an initial conversation, an in-person shop interview, and a practical discussion about diagnostics, dispatch, and repair quality.

Job Description We’re seeking a skilled plumber experienced with installing and servicing water treatment equipment—including water softeners, backwash filters, carbon systems, shower filters, and under‐sink reverse osmosis units—to join us on an as‐needed project basis. Many of our customers also request ongoing maintenance such as filter cartridge changes, softening resin replacement, and general system servicing. A solid understanding of plumbing practices and basic electrical code/wiring is required. A C‐36 plumbing license is highly advantageous, but not mandatory—you can work with us and earn certification as you grow. You’ll visit customer sites to provide estimates, recommend appropriate water treatment solutions, perform installations, and train customers on system operation. In addition to fieldwork, some warehouse duties may be assigned, including assembling water filters, printing shipping labels, light cleaning, and occasionally driving the company truck.

Job Description Lead Diesel Mechanic / Shop Foreman Employment Type: Full-Time, Direct Hire Compensation: $42–$50/hour DOE + Benefits Location: Paramount, CA Schedule: Monday–Friday, 8:00 AM–5:00 PM | Saturday, 8:00 AM–1:30 PM The Opportunity BBSI has partnered with a well-established, family-owned transportation and logistics company that has proudly served its customers since 2005. Based in Paramount, the company operates a fleet of approximately 90 Class A tractors and trailers and has built a strong reputation for stability and service. We are seeking an experienced Lead Diesel Mechanic / Shop Foreman to take ownership of daily shop operations while leading and mentoring a team of three mechanics. This is a hands-on leadership position for an experienced diesel mechanic who can diagnose complex mechanical issues, keep the shop organized, prioritize repairs, and ensure the fleet remains safe, compliant, and on the road. Key Responsibilities • Lead, mentor, and oversee a team of 3 diesel mechanics., • Manage daily shop workflow, prioritize repairs, schedule technicians, and assign work., • Perform and oversee advanced diagnostics, troubleshooting, maintenance, and repairs on Class A tractors and trailers., • Diagnose and repair Detroit and Cummins diesel engines and related systems., • Ensure assigned repairs are completed accurately, efficiently, and on schedule., • Inspect completed work and maintain high standards for quality and safety., • Maintain fleet readiness and ensure repairs meet DOT and company compliance standards., • Manage preventive maintenance schedules and vehicle maintenance files., • Order parts and maintain appropriate parts and shop inventory., • Organize parts, tools, equipment, and work areas for maximum efficiency., • Maintain a clean, safe, and organized shop., • Monitor technician performance, productivity, workmanship, and safety., • Train and mentor mechanics while helping troubleshoot complex repairs., • Communicate repair priorities, fleet status, and maintenance needs with management and operations. Qualifications • 5+ years of Class A heavy-duty diesel mechanic experience required, • Prior experience as a Lead Mechanic, Shop Foreman, Fleet Mechanic Lead, or similar leadership role, • Advanced diagnostic and troubleshooting skills with heavy-duty diesel trucks., • Strong experience with Detroit and Cummins engines., • Strong knowledge of Class 8 tractors, trailers, diesel engines, electrical systems, brakes, air systems, suspension, and preventive maintenance., • Working knowledge of DOT inspection, maintenance, and fleet compliance requirements., • Ability to diagnose complex mechanical and electrical problems independently., • Demonstrated ability to lead, train, mentor, and hold technicians accountable., • Experience scheduling repairs, assigning work, ordering parts, and managing inventory., • Strong organizational and time-management skills., • Bilingual English/Spanish required., • Valid driver's license and clean driving record., • Class A CDL and ASE certifications are a plus. Benefits • Paid Vacation, • Paid Holidays, • Paid Sick Time, • Retirement Plan, • Stable, long-term employment, • Supportive, family-owned company culture Why Join? This is an opportunity to take ownership of a well-established fleet maintenance operation while remaining hands-on with the work you know best. You'll have the support of ownership, the opportunity to develop a team of mechanics, and the stability of joining a thriving, respected family-owned company that has been in business for more than 20 years. For immediate consideration call or text JP 909. 921 8569 \nCompany Description BBSI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. California applicants: to see how we protect your data, visit our website at https://www.bbsi.com/privacy-notice-california-applicants. BBSI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.\r\nCalifornia applicants: to see how we protect your data, visit our website at https://www.bbsi.com/privacy-notice-california-applicants.

Job Description Responsibilities Are you an Experienced Mobile Diesel Technician looking for an opportunity to work for a leader in the commercial truck industry? We are searching for tenured & certified technicians to support our customers! Our Mobile Diesel Technicians are responsible for maintaining the fleet for clients and to handle service calls at client locations, so we can provide expedited expertise directly to our customer's trucks & equipment on site. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Basic Qualifications: • High school diploma or general education degree (GED)., • 5 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Current CDL preferred but not required., • Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Peterbilt, Cummins, & ASE certifications are preferred & rewarded Total Rewards & Compensation: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Commercial Service Plumber We are seeking an experienced Commercial Service & Repair Plumber capable of diagnosing, repairing, and maintaining plumbing systems in commercial properties. This is a service-focused role, not new construction. You must be comfortable working independently, communicating clearly, and documenting work professionally. Responsibilities • Diagnose plumbing issues in commercial buildings, • Repair leaks, valves, fixtures, water heaters, drains, piping, • Perform troubleshooting and system inspections, • Communicate findings clearly to office and customers, • Identify additional repair or maintenance opportunities, • Complete electronic service reports with photos, • Maintain professional appearance and customer service attitude Requirements • 5+ years plumbing service experience, • Strong troubleshooting ability, • Experience in commercial environments preferred, • Ability to work independently, • Valid driver’s license and clean driving record, • Ability to use mobile service software, • Professional communication skillsAt least 5 year’s experience Must have a clean driver’s license record or minimal points Must have knowledge in running sewer cleaning equipment Eligible to work in the USA Must be computer literate A MUST Company DescriptionCBMI is a growing commercial service company providing plumbing, HVAC, and electrical services to property managers, commercial buildings, retail centers, and industrial clients. We operate with structure, professionalism, and clear performance standards. Our technicians are supported by strong dispatch, organized workflow, and consistent service demand.CBMI is a growing commercial service company providing plumbing, HVAC, and electrical services to property managers, commercial buildings, retail centers, and industrial clients.\r\n\r\nWe operate with structure, professionalism, and clear performance standards.\r\n\r\nOur technicians are supported by strong dispatch, organized workflow, and consistent service demand.

Job DescriptionRev up your career with Tire Pros in Montebello, CA! We're seeking a passionate full-time Auto Repair Service Coordinator to join our team and drive customer satisfaction to new heights. Enjoy competitive pay of $22-$28 per hour and solid benefits including:Health InsuranceDental InsuranceVision InsurancePaid Time Off (accrued vacation and sick hours)Employee Discount ProgramTHE GROWTH YOU HELP PROVIDE AS AN AUTO REPAIR SERVICE COORDINATOROur Auto Repair Service Coordinator will enjoy a full-time schedule, immersing themselves in the exciting world of automotive repair and customer service. Shifts will be provided upon hire!As our Auto Repair Service Coordinator, you'll assess our customers' vehicle needs with precision, providing recommendations and scheduling appointments with ease. Whether in person or over the phone, your exceptional communication skills will shine as you guide customers through the repair process, answering questions and addressing concerns with confidence.OUR IDEAL AUTO REPAIR SERVICE COORDINATORExcellent customer service skillsGreat phone skillsKnowledge of multiple tire brands (we can train you!)Experience in other successful tire and auto repair stores is a huge plus. Knowledge of Identifix and other similar software is helpful. Any industry certifications are also a plus.ABOUT USTire Pros has been providing our customers with high-quality products and services for years. We offer top-of-the-line tire brands as well as automotive repair and maintenance services. Whether it's a tires, alignment, brakes, suspension, or preventive care, it's no problem for our team. Our goal is to provide professional service and a hassle-free experience, every time. We have a rock-solid reputation for providing excellent services, support, and satisfaction. We build relationships for the long haul.We know that we would not be able to provide this level of service without our hard-working team. We value each employee and encourage growth. We do our best to attract and retain the highest-caliber employees by providing a fun and friendly work environment along with excellent training and development, competitive compensation, and top-tier benefits. Apply now to start your exciting new career with a strong and stable company.HOW TO JOIN USRev up your career with Tire Pros today! If you're ready to bring your experience, communication skills, and positive attitude to our customer service team, fill out our initial 3-minute, mobile-friendly application now! Let's hit the road to success together! Job Posted by ApplicantPro

Job Description SUMMARY As a mechanic, you will perform work of considerable difficulty in the repair and maintenance of vehicles, semis, trailers, and equipment. Performing inspections, diagnostics, and repairs. You will also perform related work as assigned. ESSENTIAL DUTIES AND RESPONSIBILITIES/ other duties as assigned… • Know how to operate specific mechanical systems including electronics, hydraulics, and air brakes., • Running diagnostics on different vehicles and equipment. (Cummins, Ford Power Stroke, etc.), • Regular inspections and scheduled maintenance., • Complete any repairs that are needed such as repairing worn-out machine parts, etc., • Daily maintenance and repair logs., • Removes unsafe equipment from facility operating area and notifies supervisor., • Performs other related duties as assigned. KNOWLEDGE, ABILITIES, AND SKILLS REQUIREMENTS... • 3+ years mechanic experience, • Must own their own tools., • Knowledge in the repairs semi-trucks/trailers, • Experience working with air brakes, electrical, fuel systems and hydraulics., • Must be qualified to perform a DOT inspection on trucks and trailers., • Be able to complete a 90-day BIT inspection., • Ability to use hand and power tools to repair trucks and trailers., • Ability to read repair manuals., • Valid driver’s license., • Excellent mechanical repair skills., • Ability to follow instructions., • Analytical and problem-solving skills., • Must be able to operate a computer.

Job Description Diesel Truck & RV Mechanic / Technician • Schedule: 5-Day Work Week | Monday – Friday (with occasional Saturday shifts based on shop volume) | Day Shift & Overlapping Shifts (8–10 hour shifts) + Overtime available, • Location: Anaheim, CA, • Compensation: $37 - $40.00 per hour (Starting base pay based on experience) Position Summary Fleet Services is seeking an experienced, reliable, and driven Diesel Truck & RV Mechanic / Technician to join our production team. This position is ideal for a skilled mechanic with a solid foundation in heavy-duty repair who wants a stable shop environment with excellent competitive pay, guaranteed hours, and a clear path for professional advancement. In this role, you will work out of our Anaheim location across a diverse, engaging mix of medium and heavy-duty commercial trucks, fleet trailers, and specialized motorhome/RV chassis. You will work closely with a supportive management team—including our Shop Foremen and Service Writers—who operate as a unified team to ensure efficient parts routing, zero yard delays, and a highly organized workflow. Why Choose Fleet Services? • High Earning Potential: Steady, competitive hourly pay that respects your field experience, plus overtime opportunities based on shop volume to maximize your earning potential., • Structured Shop Operations: Work under a clear, communicative leadership structure. Our Shop Foremen execute first-thing morning check-ins to review daily jobs, check your progress, and ensure you have the exact parts and tools you need to stay productive., • Professional Development & Cross-Training: We actively focus on employee growth. You will collaborate directly with senior technicians and shop leadership to cross-train across multiple platforms, master advanced diagnostics, and expand your skill set beyond your prior roles. Key Responsibilities • Bumper-to-Bumper Service: Perform intermediate diagnostics, routine preventative maintenance, and comprehensive mechanical repairs on medium/heavy-duty trucks, trailers, and RV chassis., • Systems Troubleshooting: Diagnose and repair air and hydraulic brake systems, front/rear suspensions, steering linkages, electrical circuits, lighting systems, and heavy-duty HVAC units., • Proactive Diagnostics: Execute thorough initial inspections (including complete suspension and secondary system checks) immediately on day one so that our Service Writers can order required parts and secure customer approvals without production delays., • Labor Efficiency: Maintain an aggressive focus on billable, revenue-generating jobs. Work closely with shop leadership to manage clock hours and minimize unapplied (idle) time under our daily efficiency guidelines., • Compliance Inspections: Conduct highly accurate safety inspections to prepare commercial units for state and federal DOT and BIT compliance., • Production & Documentation: Maintain a clean, organized, and safe bay. Accurately document completed repair steps, clock hours, and technical diagnostic notes on work orders via our shop management system (Karmak). Qualifications & Requirements • Experience: Minimum of 2–4 years of verifiable, hands-on experience in heavy-duty commercial truck, trailer, or RV maintenance and repair., • Tools: Must possess and maintain a complete, professional personal tool set capable of handling general heavy-duty repairs (in alignment with California trade guidelines for this wage tier)., • Technical Skills: Strong mechanical aptitude with solid foundational knowledge of diesel engine maintenance, air brake systems, and circuit-level electrical troubleshooting. Experience with Cummins diesel engines or RV chassis systems is highly advantageous., • Licensing: Must possess and maintain a valid driver’s license. A valid Class "A" or Class "B" Commercial Driver's License (CDL) is preferred., • Screening: Must be able to pass a clean background check, pre-employment physical, and drug screening. Our Comprehensive Benefits Package Includes: • Competitive Hourly Rate with Overtime, • Comprehensive Health Insurance (Medical, Dental, Vision), • Company-Paid Life Insurance & Disability Coverage, • 401(K) Retirement Plan with Company Match, • Paid Vacation and Personal Days, Paid Holidays, and Paid Sick Days, • Company-Provided and Laundered Uniforms, • Continuous, Paid Hands-On Technical Training and Cross-Training To Apply: Ready to bring your tools to an established independent shop that treats you right and respects your drive? Apply TODAY to connect with our team and schedule an interview with our shop manager! Company: Fleet Services, Inc. Location: Anaheim, CA

Job Description MCI is North America’s leader in motor coaches for both the public and private markets. We are seeking a skilled and reliable Heavy Duty Bus and Coach Mechanic to join our team in maintaining and repairing our diverse fleet. Are you a seasoned mechanic with a passion for both traditional and emerging vehicle technologies? In this hands-on role, you will be responsible for performing diagnostics, repairs, and preventive maintenance to ensure our vehicles—from diesel-powered buses to electric drivetrains—are safe, efficient, and ready for service. Your expertise will be key in keeping our fleet operating at peak performance. What You Will Do: • Diagnosing and Repairing Diesel Engines: Apply your expertise to troubleshoot and repair diesel engines. Perform both minor and major overhauls to keep our engines running efficiently., • Drive Line Component Maintenance: Remove, repair, and replace crucial drive line components such as transmissions, drive shafts, and differentials., • Engine and Body Accessory Repairs: Maintain and repair essential engine and body accessories, including heating and air conditioning systems, alternators, generators, voltage regulators, and suspension components., • Braking System Inspection: Conduct thorough inspections and repairs of braking systems to maintain the safety and effectiveness of our fleet., • Electrical Systems Troubleshooting: Diagnose and repair electrical systems and components, ensuring all systems function correctly and efficiently., • Seating, Steering, and Glass Installations: Assisting to perform installations and repairs of seating, steering components, and glass, ensuring comfort and functionality for passengers., • Electric Bus Maintenance: Work on electric buses, including maintaining and inspecting high-voltage systems, battery packs, and electric drivetrains. What You Need to Be Successful: • Technical Expertise: Experience with diesel engines, driveline components, and electrical systems. Familiarity with electric vehicle maintenance is a plus., • Tool Proficiency: Proficiency with diagnostic devices (e.g., DDEC and ATEC readers), A/C recovery and charging equipment, and shop tools (e.g., hydraulic presses, pullers, manometers, tachometers, decelerometers, VOA instruments, dial indicators, micrometers, reamers, hones, vacuum and compression pumps, brake lathes, and other power tools) is highly valued., • Certification: Additional certifications related to electric vehicles or advanced diagnostics are beneficial but not required, • Experience in Fabrication and Machining (Optional): Skills in welding, machining, or fabrication are a plus. Including the ability to utilize these skills to address unique repair needs and contribute to custom modifications as required., • Safety and Precision: Strong understanding of safety practices and effective use of personal protective equipment., • Team Collaboration: Ability to work independently and as part of a team. Strong communication and organizational skills. Why Join Our Team: • Benefits starting day one of employment!, • Competitive Wages, • Comprehensive Benefits Package: Eligible for benefits on the first day of employment, including:, • 401(k) with employer match, • Health, dental, and vision coverage, • Basic dental option with a $0 paycheck contribution available, • Vision plan with $0 paycheck contribution, • Company Paid HSA (Health Savings Account) Contribution when enrolled in the High-Deductible medical plan with HSA., • Healthcare and Dependent Care Flexible Spending Accounts (FSA) available, • Company-paid Basic Life, AD&D, and short-term disability insurance, • Employee Assistance Program, • Voluntary benefits including critical illness, hospital indemnity, and accident insurance., • Paid holidays, • Paid time off, • Modern Work Environment: Work in clean, state-of-the-art facilities with the latest tools and technologies., • Career Growth: Ongoing training and development through a variety of initiatives, with tuition subsidies for external courses to support your professional advancement. Hourly Rate: $38 - $42 OUR WHY: We exist to move people. Our mission is to design and deliver exceptional transportation solutions that are safe, accessible, efficient and reliable. NFI Group is a leading independent global bus manufacturer providing a comprehensive suite of mass transportation solutions. News and information is available at www.nfigroup.com, www.newflyer.com, www.mcicoach.com, www.nfi.parts, www.alexander-dennis.com, www.arbocsv.com, and www.carfaircomposites.com.

Job Description Velocity Isuzu Trucks of Carson, California is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Job DescriptionSQL DBA / Systems AnalystEmployment Type: Full Time, Mid-levelDepartment: Information Technology CGS is seeking a SQL DBA / Systems Analyst to join our team supporting a wide-ranging technical support initiative for a large Federal agency.CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Advanced processing of Electronic Stored Information (ESI) into multiple systems including hands-on file manipulations and conversions.- Designing and implementing action plans to upgrade new litigation support tools within established environments by participating in Change Control Board Meetings.- Leading user acceptance testing efforts and validating the rollout of new software upgrades; and integrating legal systems to improve efficiencies by creating scripts and advanced queries and introducing automated workflow concepts.- Assists in administering database organizations, standards, controls, and procedures.- Provides technical consulting in the definition, design, and creation of a database environment.- Maintains documentation and develops database dictionaries. Qualifications:- Undergraduate degree (or equivalent) with five years of professional experience, including four years performing tasks related to ESI Processing or upgrading and integrating technical systems.- Knowledge of file manipulation applications, scripting, and the eDiscovery industry.- Certification in an eDiscovery program or related software package (i.e., Concordance, Relativity, Clearwell).- Must be willing to achieve Relativity Certified Administrator credential within 6 months of hire.- Must have experience working within a network environment supporting an eDiscovery platform.- Must have experience in Performing eDiscovery application system maintenance, upgrades, and day-to-day administration.- Must have three years of experience designing, administering, maintaining, and updating databases.- Must be familiar with government network operating environment standards and security requirements. Ideally, you will also have:- 10+ years of experience supporting eDiscovery teams with SQL DBA requirements.- Technical certifications or other pertinent graduate degrees preferred.- Technology-assisted review experience is a plus. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/For more information about CGS please visit: https://www.cgsfederal.com or contact: Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description All Modal Transportation is looking to fill a position for an experienced and energetic Fleet Dispatcher/Transportation Manager to support our year-round operations. All Modal is a Drayage & Intermodal Trucking company servicing the ports of Los Angeles and Long Beach and the rails roads. The position is responsible for managing the daily operations of our drivers and company-owned trucks. Job Duties and Responsibilities: • Managing operation of steady routes; dispatching and scheduling appointments with terminals, pick-ups, and drop-offs, • Responsible for managing a local fleet of Drivers, • Complete oversight of our drivers and daily terminal operations, • Working closely with the Office Manager in regard to the qualification, hiring, training, and retention of drivers, • Knowledge of DOT and OSHA regulations and the ability to operate in compliance with these regulations as well as within company guidelines, • Managing routine and non-routine maintenance for all the trucks and coordinating such repairs with various shops in the area, • Handling roadside assistance needs and developing a cost-effective way to minimize on-the-road tire changes and repairs, • Monitoring budget and operational metrics while diagnosing and improving processes and procedures to ultimately improve performance and profitability, • Other duties as required Qualifications/ Requirements: • Minimum of 2 years of port - drayage dispatching experience and operations in the trucking industry, • Excellent written and verbal communication skills as well as interpersonal skills and problem-solving ability, • Ability to multi-task various functions simultaneously, • Maintain a positive attitude, • Have strong attention to detail, • Must be willing to work a flexible schedule and long hours, • Strong computer skills – good working knowledge of Microsoft Office Suite: Excel, Word, Outlook, • Professional driving experience is a plus, • Spanish, Russian, or Bulgarian speaking is a plus Benefits: Competitive pay Paid Time Off – vacation and holidays, health care, dental, vision, Life Insurance & 401K Growing Company with potential for career advancements!

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. IT Rocket Lab's IT team is responsible for how our global teams access information and run operations across our computer systems, networks, and devices. Our hardworking IT team is a group of flexible problem-solvers working in a fast-paced environment but who also thrive under the challenge of supporting all of our proprietary systems and people, from finance to launch operations. HRIS ANALYST II Based on site at Rocket Lab's global headquarters in Long Beach, CA, the HRIS Analyst II will play an integral role within the Enterprise Information Systems (EIS) team. This role requires specialization in HRIS platforms, particularly Workday HCM and ADP payroll systems. In this role you will engage closely with various departments and stakeholders across different geographical locations, including Human Resources, Finance, Payroll, EIS, and IT. Your core responsibility will be to provide HRIS solutions, support, and comprehensive analysis of HR data. WHAT YOU'LL GET TO DO: • Assist with implementation, optimization, and maintenance of HR systems, collaborating closely with HR, Finance, EIS, IT, and vendors., • Develop, configure, and deliver insightful reports and dashboards to provide key data and business insights., • Assist with opportunities for process automation and optimization to drive business outcomes., • Ensure data accuracy and integrity across integrated applications through analysis, clear documentation, and swift resolution of any issues., • Assist with system tests, respond to user reports, diagnose, and resolve issues. YOU'LL BRING THESE QUALIFICATIONS: • 2+ years' Workday HCM administration experience and bachelor's degree, or equivalent years of work experience (HS Diploma or GED, and 6+ years of work experience)., • Proven hands-on experience in business requirements gathering and solution delivery., • A strong technical background with HR, recruitment, payroll, and collaboration tools (Workday experience is a must)., • Experience maintaining HRIS-related documentation, including solution documents and technical/functional specifications., • Ability to travel and communicate outside of work hours., • Must be able to work extended hours and/or weekends as needed. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Excellent communication and interpersonal skills, coupled with the ability to articulate technical concepts and establish effective working relationships at all organizational levels., • Certification or training in Workday HCM is highly desirable., • Bachelor's degree in human resources, information systems, business administration or a related field., • A commitment to continuous learning and staying up to date with the latest HRIS advancements. This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$88,000—$110,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description Overview CoolSys solves the most complex challenges in refrigeration, air conditioning, heating, engineering, and energy management. With over 3,700 associates nationwide, we deliver tailored solutions to help businesses cut costs, improve equipment performance, and reduce emissions. Our services include HVAC and refrigeration equipment sourcing, installation, repair, maintenance, monitoring, and optimization. We also offer engineering design, energy resilience and consumption optimization, asset recycling, and seamless multi-site rollouts across states. CoolSys serves over 45,000 customer locations in industries like retail, food service, commercial, data centers, industrial, and pharmaceuticals. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! We understand that hiring great people is the foundation of everything we do. Our employee benefits packages include: • Competitive pay: $25-$38/HR - DOE!, • Benefits: Medical, Dental, Vision and Prescription coverage., • Paid vacation, holidays, and floating holiday., • 401(K), • Company sponsored life insurance, as well as optional AD&D, short and long-term disability., • Tuition reimbursement., • Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more., • Pet Insurance., • Legal Plan, and ID Theft Protection. Responsibilities JOB SUMMARY: The Dispatcher 2 is responsible for overseeing the daily coordination and distribution of work to Technicians, ensuring efficient service delivery, and supporting dispatch team operations. This role acts as a key point of contact between dispatchers, Service Managers, and Technicians- providing guidance, resolving escalations, and driving adherence to service standards. The Dispatcher 2 plays a pivotal role in optimizing resource allocation, maintaining customer satisfaction, and ensuring seamless operations in line with company policies and procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES • Independently evaluate and prioritize service requests, including backlog, considering urgency, customer impact, SLA requirements, and resource constraints., • Use independent discretion in directing service calls to technicians, balancing their skills, workloads, geographic locations, and availability to optimize efficiency., • Collaborate with Service Managers and dispatch team members to resolve escalations and ensure alignment of resources with operational needs., • Ensure compliance with service level agreements (SLAs) and take proactive steps to address potential delays or missed commitments., • Serve as a point of escalation for complex or high-priority service issues, providing solutions to ensure timely resolution., • Generate and review operational performance reports, identifying opportunities for improvement and recommending actionable solutions., • Conduct regular reviews of incomplete service calls, ensuring timely follow-up and resolution., • Assist in maintaining and updating the “on-call” schedules and verifying appropriate coverage for all service areas., • Support the scheduling and completion of preventative maintenance tasks in collaboration with Service Managers., • Develop a thorough understanding of market geography, technician expertise, and resource availability to enhance dispatch efficiency., • Provide mentorship and training to dispatch team members, ensuring consistent application of best practices and policies., • Perform additional tasks and responsibilities as assigned to support the team and operations. Qualifications JOB REQUIREMENTS • High school diploma or equivalent experience., • Associate’s degree or technical certification in a related field, preferred., • Technical (refrigeration) expertise, preferred. Work Experience / Skills • 3–5 years of experience in dispatch operations, customer service, or a related field, preferably in a technical service environment., • Proven ability to prioritize and manage multiple tasks in a fast-paced environment., • Strong organizational skills and attention to detail for accurate scheduling and reporting., • Excellent communication skills, both written and verbal, with the ability to maintain professional relationships with customers and internal teams., • Strong problem-solving skills and the ability to remain calm under pressure., • Demonstrated ability to work collaboratively in a team environment and provide mentorship to peers., • Flexibility to adapt to changing priorities and work occasional evenings, weekends, or on-call shifts as needed., • Ability to understand and follow all company policies and procedures and all applicable State and Federal laws., • Proficiency in using typical business tools including E-Mail, Word, Excel, etc. PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment This job operates in a clean, well-lit and climate-controlled professional office environment with minimal physical hazards and noise. This role routinely uses standard office equipment such as computers, phones, printers, etc. Physical Demands While performing the duties of this job, the employee is regularly required to stand, sit, walk, talk, hear, and use hands and fingers to operate office equipment. The employee is occasionally required to reach, stoop and kneel. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and color vision.

Job DescriptionOffice of General Counsel: • Annual Salary Range for Program Analyst: $92,960 - $123,943, • FLSA Exempt for Program Analyst / Non-Union Represented, • This position allows for up to four days of remote work per week. About the Office:The Office of General Counsel (OGC) is in-house counsel to the State Bar, providing a full range of services, including representation of the State Bar in all state and federal courts and before administrative agencies; advocacy of State Bar discipline and admission cases in the California Supreme Court; and providing legal advice to the State Bar Board of Trustees, and all State Bar entities, executives, and programmatic clients. OGC provides legal advice and representation in the following areas: litigation, admissions and discipline, antitrust, Bagley-Keene Open Meeting Act, bankruptcy, California Public Records Act, collections, contracts, copyright, governance, labor and employment, legislation, regulations and rules, real estate, regulatory work, and general corporate matters. About the Position:The Office of General Counsel seeks a highly motivated, analytical, detail-oriented professional to join our team. This position will primarily focus on coordinating and responding to requests for records under the California Public Records Act (CPRA), under the supervision of an Assistant General Counsel Such tasks include, but not are not limited to: • Drafting and sending responses to public records requests and ensuring compliance with the CPRA, including drafting initial responses that set out all applicable exemptions., • Independently communicating with public records requestors to help them identify relevant documents and ensure effective interpretation of requests, as necessary., • Working with offices within the State Bar to gather records and providing guidance and support to the offices to identify/locate responsive records., • Independently reviewing documents and determining applicable exemptions and required redactions consistent with the CPRA and the State Bar Act., • Researching eligible exemptions and stay abreast of changes to the CPRA and related legislation., • Organizing records with particular attention to detail and maintaining excellent documentation of request status such that backup coverage can be provided during absences – both planned and unplanned., • Educating and advising staff on CPRA obligations and procedures. The position will also handle other legal and administrative support tasks under the supervision of an OGC attorney, including, but not limited to: • Assisting with subpoena and discovery compliance, including reviewing requests, gathering responsive documents, coordinating with internal departments, drafting responses and tracking deadlines., • Providing support for responding to government claims, including preparation of response letters and tracking deadlines., • Conducting document review, analysis, and organization for litigation, audits, investigations, or other regulatory matters., • Assisting with contract management, including drafting standard terms, tracking contract status, and maintaining files., • Providing litigation support as needed including case management and litigation tracking., • Providing general support on projects or other assignments as assigned or directed by OGC attorneys, including involving the knowledge, interpretation, and application of State Bar policies, rules, regulations, and procedures., • May perform a number of other similar or related duties which may not be specifically included within this position description, but which are consistent with the general level of the job. The ideal candidate has prior experience handling records requests (either under the CPRA or the Freedom of Information Act) in a government setting and a solid understanding of public record laws They are highly skilled at managing competing priorities, analyzing sensitive documents for legal compliance, and communicating effectively within the organization and to members of the public. Candidates must possess excellent judgment and discretion, be able to work independently, identify legally sensitive information, apply exemption criteria, and produce clear and accurate written responses. They must also be technologically adept, capable of navigating Microsoft Office Suite, document management systems and tracking tools to maintain accurate records and ensure timely responses. The right candidate will also embody the State Bar's core values, particularly growth mindset, clarity, respect, and excellence. Additionally, they should align with the State Bar's mission, strategic plan, and goals of the office. Definition:Under general supervision, the Program Analyst performs a variety of analytical, technical, and administrative duties in assigned State Bar divisions/units. Distinguishing Characteristics:The Program Analyst classification is a journey-level professional classification distinguished from the lower-level Program Coordinator in that the latter is focused on administrative coordination, whereas the Program Analyst is the professional class performing analysis and technical assistance. Examples of Essential:Duties may include, but are not limited to the following: • Performs professional work in support of State Bar programs and services within the various State Bar divisions/units, as assigned, involving the knowledge, interpretation, and application of State Bar policies, rules, regulations, and procedures., • Research information by identifying, locating and extracting relevant data in order to obtain sufficient, valid and reliable data for analysis and decision making purposes., • Reviews processes and maintains program transactions, records, and other documents; assists in the preparation and maintenance of statistical data, reports, correspondence, special studies, and conducts research., • Participates in a variety of complex and detailed programmatic responsibilities involving problem solving., • Evaluates program effectiveness by comparing outcomes to goals to determine whether to take corrective actions or recommend modification to processes and procedures., • Performs research into program and quality control regulations and procedures; prepares reports on findings; identifies problems of non-compliance; recommends corrective action regarding discrepancies., • Conducts audits to determine if there are program inconsistencies or non-compliance., • Provides input in developing and evaluating program policies and procedures and evaluates and proposes changes concerning the methods of operation., • May perform a number of other similar or related duties which may not be specifically included within this position description, but which are consistent with the general level of the job. Employment Standards:Knowledge of: • Operations, services, and activities of the assigned program, departmental programs, policies, procedures, and terminology., • Codes and regulations as related to assigned program responsibility., • Principles of data analysis and research tools., • Problem identification, analysis and evaluation., • Problem solving and conflict resolution methods and techniques., • Computer information systems, including personal computer applications, word processing and spreadsheet programs., • Principles of effective writing and verbal presentation., • Working knowledge of the State Bar Offices and their functions and a general knowledge of other agencies and their interface with the State Bar., • Computerized information and database recordkeeping systems. Ability to: • Apply the policies and practices of a department., • Review and analyze complex qualitative and quantitative data., • Audit records and accurately gather, record, and evaluate data; analyze and interpret information and adopt effective courses of action., • Operate modern office equipment including computer hardware, software, and internet and web-based applications., • Make fine visual distinctions upon proofreading written documents and viewing information on a computer screen., • Compile data and prepare narrative and statistical reports., • Appropriately respond to requests and inquiries from the public, State Bar members, or other departments., • Communicate clearly and concisely, both orally and in writing., • Establish and maintain effective interpersonal relationships at all organizational levels as well as with the public., • Maintain the confidentiality of information. Minimum Qualifications:Education: • Bachelor’s degree in a field that develops skills related to essential duties, or a combination of education and experience sufficient to perform the duties of the position.Experience:, • Two (2) years of experience in data collection and evaluation, research or performance or financial analysis, grant compliance in a public sector, legal or nonprofit environment, or equivalent.License, Certificate, Registration Requirements:, • Special Qualifications including specialized knowledge, abilities, education, experience, or license may be established for individual positions. Applicants who meet the Minimum Qualifications will be required to successfully complete the State Bar’s selection process for this classification. About the State Bar:The State Bar of California’s mission is to protect the public and includes the primary functions of licensing, regulation, and discipline of attorneys; the advancement of the ethical and competent practice of law; and support of efforts for greater access to, and inclusion in, the legal system. Our Values:Clarity | Investing in Our People | Excellence | Respect | Growth MindsetLearn more about our values. DEI Statement:We are a diverse, equitable, and inclusive workplace where all of our employees and prospective employees experience fairness, dignity, and respect. Learn more about our commitment to DEI.

Job DescriptionI. Position Description The purpose of this position is to perform maintenance on mobile equipment, including Caterpillar loaders, Trailers, Cranes, Forklifts, Manlifts and other gas, electric, and diesel mobile equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES • Troubleshoot, repair, and maintain s mobile equipment., • Uses tools and measuring equipment., • Complies with all environmental, health, safety and housekeeping programs., • Other duties as assigned., • Participate and support plan JTE efforts as appropriate., • Support and participate in plant BBS program., • Use mobile equipment as necessary (forklift, man-lift, electric cart).II. Pre-Hire Requirements, • Diagnostic experience with diesel, • High school diploma or GED diploma, • Excellent oral and written communication skills, • 3 years’ experience as a mobile equipment mechanic, • Must hold relevant Certifications as a trained Mobile Mechanic, • Basic automotive mechanic hand toolsIII. Qualifications, • Environmental training applicable to the job, • Safety training for applicable equipment, • Job instructional training, • Quality system familiarization, • EMS ISO 14001, 9001, and 45001 awareness. Plant EMS objectives and targets, • Significant environmental air aspects and impacts, • Active participation and support of plant JTE initiative and activities.IV. Physical Requirements & Work Environment While performing the duties of this job, the employee is regularly required to stand and walk. The employee frequently is required to use hands to finger, handle, or feel objects, tools, or controls and reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, crouch, or crawl; and talk and hear; and work at heights. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles. The employee frequently works near moving mechanical parts and is frequently exposed to extreme heat. The employee occasionally works in high precarious places and in outside weather conditions and is occasionally exposed to wet and/or humid conditions, toxic or caustic chemicals, risk of electrical shock, and vibration. The noise level in the work environment is usually very loud. Employees must be able to wear Personal Protective Equipment (PPE). Shift schedule is from 2:00pm to 10:30pm. Will pay an additional $ 0.85 per hour for working the swing shift.

Job DescriptionAs a valued member of our team, the Maintenance Truck Tech II is required to perform all duties of a level 1, in addition to perform basic to mid-level repair skills on at least 80% of all vehicle areas including hydraulic systems, engine and transmission accessories. Effective skills in welding, use of torch and A/C systems. Not including electronic or high-level diagnostics and repairs on all vehicle areas; also, not including internal component repairs of engine, transmissions, and gear boxes. Shift Tuesday - Saturday 10:00 am- 6:30 pm.Occasional overtime may be required as needed. Travel Required: Estimated less than 25% Benefits· Paid Holidays· Paid Vacation· Medical, Dental, Vision· 401k Retirement · $100 credit for boots after 90 days · Uniforms provided · Tool allowance when applicable · Monthly credit for cellphone use Essential Functions: • Appropriate tools required to diagnose and perform mayor repairs in vehicles., • Able to use compressed gas torch and adjustments., • Effectively do inspections and mechanical repairs to equipment and routine preventive services., • Efficient communication and computer skills for proper file documentation on each job performed., • Knowledge and ability to identify the proper name of all visible parts and non-visible parts in a vehicle., • Maintain a high standard of safety, cleanliness, and efficiency in all maintenance., • Will maintain appropriate record keeping for Bit inspections, DVIRs, work done description and work orders., • Ensures vehicles meet CHP/BIT/PM inspection requirements., • Replace, install and service brake systems, cab and sheet metal components, engine accessories, HVAC systems, hydraulic systems, and lighting electrical systems., • Replace, install and service mixer truck equipment, product transfer systems, starting systems, steering systems, transmissions, wheels, hubs, and bearings., • Replace, install frame components and basic diagnose of electronic control systems., • Replace, install, service and diagnose charging systems, clutches and drive lines, and suspensions systems., • Will inspect and identify vehicle conditions on different types of equipment such as tractors, trailers, or mixers., • Will install, select, or identify proper tire replacements & legal limit knowledge., • Complete all maintenance duties as assigned, and repair all equipment on property including, but not limited to, diesel, plant, or yard equipment., • Perform routine and preventive maintenance to keep vehicles and equipment in compliance with DOT and company standards. Non-Essential Duties: • Efficient organizational skills for scheduling and periodization of jobs., • Will prepare metal surfaces and welding techniques to complete assigned tasks., • Tracks and schedules with operations or manager on vehicles status and updates., • Perform other duties as assigned by management. Core Competencies: • Ability to read and interpret documents., • Basic math and measurement skills., • Knowledge of methods, tools, and equipment utilized in maintenance repair. Travel Required: Estimated less than 25% Minimum Education and Experience • High school diploma., • 3+ years of heavy-duty tractor maintenance experience., • 3+ years experience of work on electrical, mechanical, and hydraulic systems., • Must have own tools. Preferred Education and Experience • Associates degree, technical school certificate or equivalent experience., • 4+ years of heavy-duty tractor maintenance experience., • 4+ years experience of work on electrical, mechanical, and hydraulic systems., • 2+ years experience welding. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to walk, climb, or balance, stoop, kneel, crouch, or crawl and talk or hear. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, toxic or caustic chemicals and outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, extreme heat, and risk of electrical shock. The noise level in the work environment is usually moderate to loud. The employee is regularly exposed to wet or slippery ground conditions. Employees must wear the required personal protective equipment; up to and including safety vest, hard hat, ear protection, gloves, and safety glasses. Able to climb height up to 10 feet. This Organization Participates in E-VerifyEsta Organizacion Participa en E-Verify Associated Ready Mixed Concrete is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. Associated Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Job Description A non-profit organization in Beverly Hills is hiring an AP Specialist on a contract-to-hire basis. The Accounts Payable Specialist is responsible for full-cycle AP processing, including vendor invoices, employee expense reports, credit card administration, payment cycles, and process improvements. This role will also investigate and resolve invoice discrepancies, vendor issues, and payment exceptions while supporting accurate and efficient AP operations. Experience with NetSuite, Excel, and Concur is required. The ideal candidate is detail-oriented, proactive, and able to work independently in a fast-paced environment with strong communication skills and solid full-cycle accounts payable experience. Responsibilities: Manage the full-cycle accounts payable process Review, code, and process vendor invoices accurately and on time Ensure invoices are properly approved and coded to the correct GL accounts, periods, departments, and programs Process employee expense reports and corporate card statements with required documentation Ensure payments are made according to vendor terms and contracts Maintain recurring payment schedules and support weekly payment processing Communicate with vendors and internal stakeholders to resolve issues and discrepancies Manage new vendor setup, including collection of W-9s and required documentation Perform month-end close activities, account analysis, and reconciliations Reconcile credit card statements across expense and accounting systems Assist with stale checks, voids, reissued payments, and annual 1099 processing Improve AP policies, procedures, workflow, and internal controls Support audits, vendor maintenance reviews, and ad hoc projects Qualifications: Bachelor’s degree in Accounting, Finance, Business, or related field 5+ years of progressive accounts payable experience 2+ years in a lead or senior AP role preferred Strong knowledge of AP procedures and full-cycle accounting practices Experience with process improvement and workflow development Ability to meet deadlines in a fast-paced environment Strong organizational, problem-solving, and communication skills Ability to work independently and cross-functionally High attention to detail, accuracy, confidentiality, and dependability Customer service mindset when working with vendors and employees Proficiency with NetSuite and Excel required Advanced Concur experience required This position is contract-to-hire and requires onsite work. Pay is based on experience, between $30-35/hr. • Bachelor’s degree in Accounting, Finance, Business, or a related discipline., • At least 5 years of progressively responsible accounts payable experience, including ownership of full-cycle processes and lead-level duties., • Strong knowledge of accounts payable operations, invoice coding, payment processing, and general accounting practices., • Hands-on experience driving process improvements that increase accuracy, efficiency, or control within AP functions., • Proficiency with NetSuite, Excel, and Concur, with the ability to work effectively across multiple financial systems., • Demonstrated ability to manage deadlines, solve problems independently, and stay organized in a high-volume environment., • Strong written and verbal communication skills with a detail-focused approach to vendor and internal stakeholder interactions., • High standards for confidentiality, customer service, and attention to detail in handling financial information.

Job Description Job Title: Field Service Mechanic – Heavy Duty Work Trucks Position Location & AOR: Bakerfield, CA – San Diego, CA. Company: Interstate Assembly Systems Pay Range: $35.00 - $45.00 / Hour D.O.E. We’re looking for a skilled and motivated Field Service Mechanic to join our team and keep our clients’ fleets running at peak performance This role requires a hands-on professional who can troubleshoot complex mechanical, hydraulic, and electrical issues in the field, ensuring minimal downtime for our clients working in the Southern California region. (Bakersfield, CA – San Diego, CA.) A company service vehicle, laptop and cell phone will be provided with this position. This position requires extensive daily travel to customer job sites, with travel time potentially reaching up to seven hours per day. Occasional overnight travel may be necessary based on business and customer needs. Interstate Assembly Systems is a leading provider of heavy-duty work truck solutions, serving industries such as construction, mining, utilities, and more. We specialize in custom-built service trucks equipped with cranes, welders, air compressors, fuel and lube tanks and reels, hydraulics, and other advanced systems. Key Responsibilities: • Conduct routine maintenance and inspections on heavy-duty work trucks and their integrated systems (cranes, welders, air compressors, etc.)., • Diagnose and repair mechanical, hydraulic, electrical, and pneumatic issues on trucks and attached equipment., • Perform welding and fabrication tasks as needed to repair or modify truck components., • Operate and test cranes to ensure proper functionality and safety compliance., • Service and maintain air compressors and other auxiliary equipment., • Respond to client service calls in the field, providing timely and effective solutions., • Document all service work, including parts used, time spent, and detailed repair notes., • Adhere to safety standards and regulations, including OSHA and DOT requirements., • Collaborate with clients to explain repairs and provide recommendations for preventative maintenance. Qualifications: • Minimum of 3-5 years of experience as a mechanic working on heavy-duty trucks or equipment., • Proven expertise in repairing hydraulic systems, cranes, welders, and air compressors., • Strong knowledge of diesel engines, electrical systems, and heavy-duty vehicle diagnostics., • Welding and fabrication skills (e.g., MIG, TIG, stick welding) preferred., • Ability to read and interpret technical manuals, schematics, and diagnostic codes., • Valid driver’s license required; CDL (Commercial Driver’s License) is a plus., • Comfortable working independently in the field and in various weather conditions., • Excellent problem-solving skills and attention to detail., • Physical ability to lift to 50 lbs. and work in confined spaces as needed., • Certification in crane operation, welding, or heavy equipment repair is an advantage. Employee Benefits: • Competitive Wages – Be paid your worth!, • Uniforms - fully supplied by Interstate!, • Tuition assistance - for educational and ongoing career growth, • Health, dental and vision coverage - begins on the first day of the following month., • Paid Time Off - (PTO) starts accruing day one of your full-time employment., • Holidays - 6 Holidays and 2 Floating Holidays per year, • 401(K) - with company matching., • Long Term Disability - Supplied, • Short Term Disability - Supplied, • Life Insurance - Supplied, • Healthiest You - Virtual Health Care paid by Interstate., • PPE Reimbursement- Safety Glasses and Safety Boot Reimbursement, • Pet Insurance – We care about our furry friends!, • Employee Discounts - available on products and services, • Paid Employee Assistance Program - Free 24/7 Access to a guidance consultant regarding life challenges you or family member may face., • Paid Health and Well-being screening - for employees and their spouse Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Interstate Companies is an Equal Opportunity Employer, and we encourage all qualified and interested persons to apply for this position by submitting a resume for consideration. #SROFH Military Friendly Hiring

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc240041

Job DescriptionCommercial Truck Alignment & Front-End MechanicCompany: HireNow Staffing (Direct Placement Partner)HireNow SnapshotHireNow Staffing is actively recruiting a seasoned, highly skilled Commercial Truck Alignment & Front-End Mechanic to join one of our valued client partners in Santa Fe Springs, California. This opportunity is ideal for an experienced heavy-duty truck technician with a strong background in commercial truck alignments, front-end diagnostics, steering systems, and suspension repairs. The successful candidate will take pride in delivering accurate repairs, maintaining high safety standards, and ensuring fleet vehicles return to service with optimal performance.Key Responsibilities • Perform precision commercial truck alignments using computerized alignment equipment, • Diagnose front-end, steering, suspension, and alignment-related issues on heavy-duty commercial trucks, • Inspect, repair, and replace kingpins, tie rods, drag links, ball joints, bushings, and related steering components, • Perform wheel balancing and tire-related services to manufacturer specifications, • Inspect suspension systems for wear, damage, and proper operation, • Complete accurate repair orders, inspections, and maintenance documentation, • Communicate repair findings and recommendations with service advisors and management, • Maintain a clean, safe, and organized work environment while following all shop safety procedures, • Utilize diagnostic equipment and specialized tools to ensure accurate repairs, • Deliver quality workmanship while meeting productivity and turnaround expectations Required Qualifications, • Proven experience performing commercial truck alignments, • Strong knowledge of heavy-duty truck front-end suspension and steering systems, • Experience operating computerized alignment equipment and related software, • Demonstrated ability to diagnose and repair heavy-duty steering and suspension components, • Strong mechanical troubleshooting skills, • Ability to read and interpret repair procedures and technical documentation, • Excellent attention to detail and commitment to quality workmanship, • Valid driver's license, • Ability to work onsite in Santa Fe Springs, California, • U.S.-based applicants only, • Must be authorized to work in the United States Preferred Qualifications, • Experience servicing Class 7 and Class 8 commercial trucks, • Previous fleet maintenance or heavy-duty truck dealership experience, • ASE Medium/Heavy Truck Certification(s) or equivalent technical certifications, • Experience with preventive maintenance inspections, • Welding or fabrication experience is a plus, • CDL (Commercial Driver's License) is preferred but not required, • Strong customer service and communication skills HireNow Package, • Compensation: $30.00 per hour, • Benefits: Comprehensive benefits package and professional growth opportunities, • Employment Type: Full-Time, • Work Location: Onsite – Santa Fe Springs, California, • Headcount: 1 HireNow ChecklistHireNow Staffing is recruiting a Commercial Truck Alignment & Front-End Mechanic who demonstrates the following:, • Proven commercial truck alignment experience, • Strong knowledge of heavy-duty steering and suspension systems, • Experience diagnosing and repairing front-end mechanical issues, • Proficiency using commercial alignment equipment and software, • Strong mechanical troubleshooting and diagnostic skills, • Ability to perform wheel balancing and tire-related services, • Commitment to workplace safety and quality workmanship, • Ability to accurately document repairs and inspections, • Valid driver's license, • Meets all required qualifications while demonstrating several preferred qualifications HireNow Standout CandidatesCandidates will be viewed most favorably if they demonstrate:, • Extensive experience working on Class 7 and Class 8 commercial trucks, • ASE Medium/Heavy Truck Certifications, • Fleet maintenance or dealership experience, • Strong diagnostic abilities with minimal supervision, • Experience performing complete front-end rebuilds and suspension repairs, • Consistent record of producing high-quality repairs while maintaining productivity goals, • Stable employment history demonstrating reliability, craftsmanship, and long-term commitment HireNow DisqualifiersThe following will prevent candidates from moving forward in the hiring process:, • Frequent unexplained job changes or unstable employment history (jumpy resumes will not be accepted or interviewed), • No commercial truck alignment experience, • Limited knowledge of heavy-duty front-end suspension and steering systems, • Inability to operate commercial alignment equipment, • No valid driver's license, • Inability to work onsite in Santa Fe Springs, California, • Applicants requiring employment sponsorship, • Candidates who do not meet the core qualifications listed for this position HireNow Staffing DisclaimerHireNow Staffing is acting as a direct placement partner for this Commercial Truck Alignment & Front-End Mechanic opportunity. All candidate information is handled confidentially and evaluated against defined requirements. This job description outlines the general scope of responsibilities and qualifications. Duties may evolve based on client needs and business growth. Only candidates meeting the core qualifications will be considered for interview. Client-specific information will be shared only with qualified candidates during the interview process.https://www.careers-page.com/hirenow-staffing-inc/job/W34YR666

Job DescriptionAs a valued member of our team, the Diesel Technician Apprentice I is required to perform routine and BIT safety inspections, oil changes, preventive maintenance services, possess minimum number of tools and capable of low skill level repairs. Pay Range$18.00-$26.00 Benefits· Paid Holidays· Paid Vacation· Medical, Dental, Vision· 401k Retirement · $100 credit for boots after 90 days · Uniforms provided · Tool allowance when applicable · Monthly credit for cellphone use Essential Functions: • Basis tools needed to effectively do inspections and mechanical repairs to equipment and routine preventive services., • Complete all maintenance duties as assigned, and repair all equipment on property including, but not limited to, diesel, plant or yard equipment., • Efficient communication and computer skills for proper file documentation on each job performed., • Ensure vehicles meet CHP/BIT/PM inspection requirements., • Maintain a high standard of safety, cleanliness, and efficiency in all maintenance., • Maintain appropriate record keeping, Bit inspections, DVIRs, work done description and work orders., • Track and schedule with operations or manager on vehicles status and updates., • Will install, select or identify proper tire replacements & legal limit knowledge., • Will inspect and identify vehicle conditions on different types of equipment such as tractors, trailers or mixers., • Perform routine and preventive maintenance to keep vehicles and equipment in compliance with DOT and company standards. Position Type/Expected Hours of Work This is a full-time position. General days and hours of work are Monday through Friday, hours to be determined. Not eligible for remote work. Occasional evening and weekend work may be required as job duties demand. Travel Required: Estimated less than 25% Minimum Education and Experience • High school diploma., • 1+ years truck-trailer repair experience preferred., • 1+ years basic diesel mechanical experience required., • 2+ years working on electrical, mechanical, and hydraulic systems., • Class C Driver's License., • Experience climbing ladders to 12 feet heights.Preferred Education and Experience, • Must have own tools., • Class B Driver’s License.Other DutiesPlease note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This Organization Participates in E-VerifyEsta Organizacion Participa en E-Verify Associated Ready Mixed Concrete is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. Associated Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Job Description Job Summary We are looking for a dedicated and detail-oriented Room Attendant to join our housekeeping team at Petit Ermitage, a hotel known for its warmth, artistry, and personalized guest experience. As a Room Attendant, you play an essential role in creating the atmosphere our guests love, one of comfort, care, and understated luxury. The ideal candidate is attentive, efficient, and takes genuine pride in creating a beautiful, welcoming environment. You will work closely with our housekeeping and front-of-house teams to ensure every room and space meets the highest standards of cleanliness and presentation. Responsibilities • Clean and prepare guest rooms and suites according to Petit Ermitage luxury standards., • Make beds, change linens, replenish amenities, and maintain exceptional room presentation., • Dust, vacuum, polish, sanitize, and thoroughly clean guest rooms and bathrooms., • Inspect rooms for cleanliness, quality, and readiness before releasing them for occupancy., • Restock supplies and promptly report maintenance issues, damages, or lost-and-found items., • Create a welcoming guest experience that reflects the unique character and aesthetic of Petit Ermitage., • Respond to guest requests promptly, courteously, and professionally., • Maintain housekeeping carts, closets, and equipment in a clean, organized condition., • Follow safety, sanitation, chemical-handling, and guest privacy procedures., • Collaborate with the Housekeeping team and other departments to ensure efficient daily operations and timely room readiness., • Perform other duties as assigned by management. What We’re Looking For • Previous hotel, resort, or housekeeping experience preferred., • Strong attention to detail, organization, and time management skills., • Reliable, efficient, and able to work independently while maintaining high standards., • Positive attitude, professional demeanor, and commitment to exceptional guest service., • Ability to work in a fast-paced environment while consistently meeting cleanliness and productivity standards., • Ability to stand and walk for extended periods and frequently bend, stoop, kneel, reach, push, and pull throughout the shift., • Ability to regularly lift, carry, push, and pull up to 35 pounds, with or without reasonable accommodation., • Ability to perform repetitive physical tasks, including making beds, vacuuming, cleaning bathrooms, and maneuvering housekeeping carts., • Commitment to maintaining exceptional standards of cleanliness, safety, and guest care., • Flexible scheduling availability, including weekends and holidays. Why Join Petit Ermitage • Work in one of Los Angeles’ most unique boutique hotel environments., • Supportive and collaborative guest services team., • Opportunities to grow within hotel operations., • Competitive pay and consistent scheduling., • Staff meals and employee perks. To Apply If you enjoy creating a warm first impression, keeping operations running smoothly, and being part of a service-focused team, we would love to meet you. Please apply directly by visiting our careers page at PetitErmitage.com Petit Ermitage is an Equal Opportunity Employer: Minorities / Females / Veterans / Disabled.

Job DescriptionJob Summary: Power Trip Rentals is seeking a dependable, hands-on Truck / Shop Mechanic to join our dedicated team! In this role, you’ll be responsible for maintaining, diagnosing, and repairing our fleet of trucks and heavy equipment to ensure safety, performance, and reliability. Work will take place both in our shop and occasionally in the field. This is a great opportunity for a skilled technician who takes pride in their work and thrives in a fast-paced environment. If you're looking to join a team that values quality work and safety, we want to hear from you! Key Responsibilities: Diagnose and perform emergency repairs and scheduled maintenance on company trucks and equipment Conduct 90-day and annual DOT inspections Use company-provided laptop and diagnostic software to troubleshoot and service medium- and heavy-duty trucks Replace, repair, and install mechanical components, including hydraulic, pneumatic, and electrical systems Ensure all company trucks and equipment are maintained to meet safety and cosmetic standards Clean and detail vehicles; apply and maintain decals Maintain a safe, organized, and clean workspace Track and maintain inventory of tools and shop supplies Read and interpret manuals, work orders, and schematics Document all services and repairs through service work orders Follow OSHA and company safety protocols Perform other tasks and duties as assigned What You Bring to the Team: High school diploma or equivalent required Minimum of 5 years of experience in truck or heavy equipment maintenance and repair Valid driver’s license with a clean driving record Must provide your own tools (as specified) Strong understanding of diesel engines, hydraulics, pneumatics, and electrical systems Ability to communicate effectively and work independently Able to lift 50 lbs, kneel, bend, and work in varying weather conditions Comfortable with documentation and basic reporting What We Offer: Competitive hourly wage based on experience and qualifications Comprehensive benefits package, including: Health, dental, and vision insurance Retirement plan with employer contributions Paid vacation and sick time Safety boot reimbursement Ongoing training and professional development Growth opportunities into Lead Mechanic, Shop Foreman, or Fleet Management roles Apply Today and Keep Power Trip Rolling Strong! We’re excited to meet candidates who share our commitment to excellence, safety, and teamwork.

Job Description Safe Gas Services is a trusted plumbing, gas, and retrofitting company serving homeowners and property managers across the greater Los Angeles area. With over a 35 years of service and a reputation built on quality workmanship and clear communication, we've grown into one of the area's most respected names in residential and commercial plumbing. We're expanding our team and looking for skilled professionals who take pride in their craft and the customers they serve. Responsibilities: • Assembling and installing gas supply lines, water supply lines, drainage systems, and related plumbing fixtures., • Troubleshooting and repairing pipe and pipeline systems in residential and commercial settings, • Perform residential and commercial plumbing installations, • Ensure all work complies with local plumbing codes and regulations, • Prepare accurate job estimates and invoices. communicate solutions clearly with customers, • Follow all company safety standards and jobsite procedures, • Deliver a professional, 5-star customer experience on every job Qualifications: • Previous experience in plumbing installation, maintenance, or related trades, • Strong knowledge of plumbing systems and installation procedures, • Excellent troubleshooting and problem-solving skills, • Strong communication and customer service abilities, • Valid driver's license and clean driving record preferred, • Ability to lift heavy materials and work in physically demanding environments, • Reliable, professional, and team-oriented attitude, • Excellent written and verbal communication skills Why Safe Gas Services? • Competitive compensation based on experience, • Steady year-round work, • Growth opportunities within a rapidly expanding company, • Supportive leadership team, • Professional work environment focused on quality and craftsmanship, • Opportunity to work on a wide variety of residential and commercial projects, • Company that values integrity, accountability, and excellence Ready to Join the Team? If you're a skilled Plumbing Installer who takes pride in doing quality work and wants to grow with a respected company, we'd like to hear from you. Apply today and build your future with Safe Gas Services. Company DescriptionSafe Gas Services Inc. is a well-established, family-owned plumbing and leak detection company based in Santa Monica, proudly serving the Westside and Greater Los Angeles County since 1989. For more than 35 years, Safe Gas Services has built a reputation for professionalism, technical expertise, and dependable service. The company has earned the trust of homeowners, property managers, and commercial clients by consistently delivering quality workmanship and responsive customer care. At Safe Gas Services, employees are the foundation of the company's success. Every team member represents the values of integrity, professionalism, and craftsmanship that have helped the company maintain continuous business operations for over three decades. Quality work, accountability, and customer satisfaction are at the core of everything the team does. Safe Gas Services specializes in full-service plumbing, gas and water leak detection, drain and sewer services, gas appliance repair, water and gas line installation and replacement, seismic gas shut-off valve installations, and retrofit inspections. The company is recognized throughout Los Angeles County for its expertise in diagnosing and solving complex plumbing and gas-related issues using cutting-edge technology and industry-leading techniques. The team is committed to providing prompt, professional service, including 24/7 emergency response, while ensuring every project is completed safely, thoroughly, and in compliance with all applicable codes and seismic safety requirements. As the company continues to grow, Safe Gas Services is seeking skilled professionals who take pride in their work, value teamwork, and are committed to delivering exceptional service to every customer. This is an opportunity to build a long-term career with a stable, respected company that has been serving Southern California communities for more than 35 years.Safe Gas Services Inc. is a well-established, family-owned plumbing and leak detection company based in Santa Monica, proudly serving the Westside and Greater Los Angeles County since 1989. For more than 35 years, Safe Gas Services has built a reputation for professionalism, technical expertise, and dependable service. The company has earned the trust of homeowners, property managers, and commercial clients by consistently delivering quality workmanship and responsive customer care.\r\n\r\nAt Safe Gas Services, employees are the foundation of the company's success. Every team member represents the values of integrity, professionalism, and craftsmanship that have helped the company maintain continuous business operations for over three decades. Quality work, accountability, and customer satisfaction are at the core of everything the team does.\r\n\r\nSafe Gas Services specializes in full-service plumbing, gas and water leak detection, drain and sewer services, gas appliance repair, water and gas line installation and replacement, seismic gas shut-off valve installations, and retrofit inspections. The company is recognized throughout Los Angeles County for its expertise in diagnosing and solving complex plumbing and gas-related issues using cutting-edge technology and industry-leading techniques.\r\n\r\nThe team is committed to providing prompt, professional service, including 24/7 emergency response, while ensuring every project is completed safely, thoroughly, and in compliance with all applicable codes and seismic safety requirements.\r\n\r\nAs the company continues to grow, Safe Gas Services is seeking skilled professionals who take pride in their work, value teamwork, and are committed to delivering exceptional service to every customer. This is an opportunity to build a long-term career with a stable, respected company that has been serving Southern California communities for more than 35 years.

Job Description Job Summary: Power Trip Rentals is seeking a detail-oriented, dependable Heavy Equipment Mechanic – Shop & Field Technician to join our growing team! This role is responsible for inspecting, diagnosing, repairing, and maintaining heavy construction equipment both in the shop and at job sites. Equipment includes diesel engines, hydraulic systems, aerial work platforms, skid steers, and other specialized rental machinery. This position requires strong mechanical expertise, problem-solving skills, and the ability to work independently in the field. If you are passionate about equipment maintenance and enjoy hands-on, on-site repair work, we want to hear from you! Key Responsibilities: • Inspecting, analyzing, and troubleshooting heavy construction equipment and systems., • Performing diagnostics and complex repairs on diesel engines, hydraulics, and electrical systems., • Reading and interpreting equipment schematics, repair manuals, and diagnostic codes., • Performing preventative maintenance to ensure reliability and safety of rental equipment., • Sourcing and replacing faulty components, parts, and systems., • Fabricating or modifying equipment components when necessary., • Documenting repairs, maintenance records, and safety compliance reports., • Providing accurate time and material cost estimates before performing work., • Liaising with suppliers and clients to ensure timely service and repairs., • Traveling to job sites to repair/service equipment in the field. What You Bring to the Team: • High school diploma or GED required; trade school or equivalent training preferred., • 3-5 years Experience working with diesel engines, heavy machinery, and hydraulic/electrical systems., • Ability to troubleshoot and repair equipment independently in the field., • Must possess a valid driver’s license and clean driving record., • Ability to read and interpret technical manuals, schematics, and diagnostic codes., • Strong mathematical and problem-solving skills., • Proficiency in MS Office (for logging service reports and estimates)., • Ability to lift 50 lbs or more and work in various outdoor conditions. What We Offer: • Competitive hourly wage based on experience and qualifications., • Comprehensive benefits package, including:, • Health, dental, and vision coverage., • Retirement plan with employer contributions., • Paid vacation and sick days., • Safety boot reimbursement, • Career development opportunities – we promote from within!, • Pathways to shop foreman, service manager, and operational leadership roles.