Offres inspector à Fullerton, CaliforniaCréer des alertes d'emploi

Job Description Pay range-$30-$50/hr DOE Core Responsibilities • Testing Operations: Perform NDT methods—such as Ultrasonic (UT), Magnetic Particle (MT), Dye Penetrant (PT), or Radiographic (RT) testing—to detect internal and external weld flaws (e.g., cracks, porosity, or lack of fusion)., • Equipment Management: Calibrate, maintain, and troubleshoot specialized inspection and testing equipment to ensure accuracy and reliability., • Code Compliance: Review blueprints, welding symbols, and Welding Procedure Specifications (WPS) to verify that welding operations align with codes set by the American Welding Society or other regulatory bodies., • Reporting: Document findings, generate formal inspection reports, and identify non-conforming work requiring repair or remediation., • Field & Lab Work: Collaborate with project managers, structural engineers, and welders across construction sites, manufacturing plants, shipyards, or refineries. Key Qualifications • Welding Proficiency: Background in structural welding processes like GMAW, GTAW, SMAW, or FCAW., • NDT Certifications: ASNT (American Society for Nondestructive Testing) Level II or III certifications in specific testing disciplines (VT, MT, PT, UT, RT)., • Inspection Credentials: Often requires or highly values an AWS Certified Welding Inspector (CWI) credential., • Blueprint Reading: Strong ability to interpret engineering drawings, welding symbols, and technical specifications., • Safety Knowledge: Requirements MANDATORY QUALIFICATIONS: Fusion Welding for Aerospace Applications Specifications. Experience working with 0.010-0.030 tolerances is a MUST Basic understanding of welding symbols per AWS 2.4 Basic blueprint reading Ability to read and comprehend simple instructions, short correspondence, and memos in English. REQUIRED EDUCATION AND EXPERIENCE: NDT Certification Looking for minimum 5 years experience as welder or supervisor’s approval of welding test plates. Benefits • 401(k), • Dental insurance, • Employee assistance program, • Employee discount, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Parental leave, • Retirement plan, • Vision insurance

Job Description PCBA INSPECTOR Location: Brea, CA 92821 Work schedule: 1st shift QUALIFICATIONS • Minimum 2 years of final inspection experience in electronic components, • Ability to read blueprints, drawings, specifications and PCB gerbers., • Skilled in electrically measuring resistors and capacitors., • IPC Certification (identify if active, expired, or in the process) Summary: The Final Inspector will perform visual, electrical and dimensional inspection of printed circuit board assemblies; will be responsible for performing receiving inspections of outsourced processes and final assembly inspections while recording results and preparing various quality documents. Candidates must be able to work a minimum of 6 hours per day under a microscope. Responsibilities: • Read blueprints and/or engineering specifications to obtain information such as specified material, electrical, cosmetic requirements and workmanship instructions., • Perform visual and dimensional inspections of printed circuit board assemblies to ensure workmanship which complies with the appropriate requirements from engineering drawings, process specifications, IPC-610 standards, J-STD-001 and customer specific criteria., • Performs inspection on electrical or electronic components by using electrical meters or instruments to confirm adherence to electrical specifications., • Performs inspection of conformal coating under both black and white light., • Perform and record results of first article inspections of boards after Thru-Hole., • Perform sub-assembly, box build, shipping, and receiving inspection as required., • Assist in failure investigations, root cause analysis and corrective action activities and quality improvement projects.\nCompany Description Exciting opportunity securing new business for electric motors, starter generators, and related technologies within our current and future aerospace and defense industries. Exciting opportunity securing new business for electric motors, starter generators, and related technologies within our current and future aerospace and defense industries.

Job Description Job Description We are a provider of professional engineering, construction management and public works inspection services to cities, water/sewer/special districts and other public agencies. Our firm specializes in construction, program, and project management services. Who we’re looking for: Public Works Inspector will work on Public Works Construction projects including concrete curbs, gutters, curb ramps, sidewalks, storm drains, RCP, water & sewer main replacements, water/sewer laterals, street lights, traffic signals, median landscape work, monument/way-finding signs, utility relocation & adjustments, grind & overlay, slurry/cape/chip seal, roadway re-construction & rehabilitation, ARHM, conventional asphalt, traffic loop replacement, striping and signage. The inspection work will be for Cities and Water Districts in Los Angeles, Orange, San Bernardino and Riverside Counties. These positions suit individuals who want to work part-time or full-time and on a project base. Responsibilities & Duties: • Reviews Plans, Specs. & Estimates (PS&E) thoroughly, highlights/tabs them; has a thorough understanding of the project., • Oversees the day to day project construction activities and be the eyes and ears of the client and the firm., • Monitors and records all work conducted by the contractor., • Prepares a comprehensive Daily Report, including measurements, quantities, activities, etc., • Identifies and records any construction obstacles impacting the scope, plans, specifications, and/or estimate., • Communicates with the Construction Manager, City, Contractor, and other parties involved in the project., • Documents the contractor's daily compliance/violations ensuring quality control of project construction activities., • Understands general construction, methods, materials, safety practices, quality control, and contract administration., • Conducts on-site inspections, enforcing compliance of plans, specifications, standards, safety practices, and materials., • Reviews traffic control plans and procedures to ensure compliance with construction zones., • Performs constructability reviews of plans and specifications., • Assists in review of contractors claims, change orders, etc., • Attends pre-construction, kick-off, progress, and field meetings., • Checks dimensions, measures quantities, materials' use and, • Prepares daily reports and recommendations on project construction activities. Qualifications: Ten (10) years of Construction Inspection experience working for Cities or Counties Public Works Departments or Water Districts or providing similar services for Cities, Counties and Water Districts as a consultant. Applicants without the appropriate background, City, County, Water/Sewer/Special District Inspection Experience will not be considered. · Abilities: · Good oral and written communication skills. · Knowledge with computer related tasks. · Ability to prepare reports and correspondences. · Ability to identify project issues, establish solutions, and review outcomes. · Familiarity with local, state, federal regulatory requirements, standard plans and specifications for public work construction (Greenbook) including standards for water and sewer main replacement projects. . Job requires driving to the job sites and meetings. Job Types: Project Base \nCompany Description A Project/Construction Management, Staff Augmentation (Consultant City Engineer, Public Works Director) and Public works Inspection firm. Applications without the appropriate background are discouraged to apply and will not be considered. A Project/Construction Management, Staff Augmentation (Consultant City Engineer, Public Works Director) and Public works Inspection firm. Applications without the appropriate background are discouraged to apply and will not be considered.

Job Description Seeking a QA Inspector familiar with the biosciences field who can check incoming and outgoing shipments. They should be able to perform sampling and inspection of all incoming chemicals, components, and closures used in the manufacturing process in accordance with approved procedures, raw material specifications and quality assurance program. Record data clearly, maintain raw material inspection database, communicate with suppliers and procurement, and develop raw material specifications. REQUIRED: · High school diploma or equivalent. · 2+ years of inspection experience in a medical device, pharmaceutical, or biotech environment. · Computer skills including Microsoft Word, Excel, and Outlook PREFERRED: · BS in a scientific discipline Experience with ERP/MRP system

Job DescriptionSUMMARY Deflash & Deburr is the Finishing method used to remove burrs and sharp edges on parts created by our machines. They are responsible for Maintaining a safe, organized, and clean work area. Perform additional tasks as assigned. ESSENTIAL DUTIES AND RESPONSIBILITIES • Setup and removal of burrs or sharp edges., • Visual inspection of each part using calipers., • Read computerized work instructions., • Remove raised particles and shavings that appear on parts., • Repetitive filing or use of a grinder to smooth away nicks and fragments., • Sanding by hand or sanding with a pneumatic hand tool for more troublesome deformities., • Wash and polish parts prior to submitting for inspection., • Audit and order materials needed for deburring activities, • Ensure deburred parts are within tolerances and coincide to print specifications., • Measure and document when required that parts meet dimension requirements., • Send the first deburr article to quality control inspector., • Make any necessary adjustments per the inspector., • Receive final "buy-off" from inspector and debur remaining parts., • Upon completion of deburring, organize parts and send to next operation., • Maintain work area safe, organized and clean, • All other duties and responsibilities as assigned in support of the company's operations. REASONING ABILITY, • Ability to interpret a variety of instructions (written and oral)., • Critical Thinking skills required. COMMUNICATION SKILLS • Ability to communicate effectively and professionally. EDUCATION and EXPERIENCE • High school diploma or equivalent, • 1-2 plus years previous experience working in Manufacturing (Aerospace preferably)., • Must have basic computer skills, data entry is required to track the production floor., • Strong mechanical aptitude., • Team player., • Must be able to lift 25lbs and stand for the entire shift. OTHER SKILLS and/or ABILITIES • Mechanically inclined and self-motivated., • Excellent work ethic and safety minded., • Excellent visual acuity and manual dexterity., • Requires working in ambient air temperature. Job Posted by ApplicantPro

Quality Control Inspector - Electronics Manufacturing We are seeking a detail-oriented Quality Control Inspector to join our electronics manufacturing team in Anaheim, CA. The ideal candidate will be responsible for ensuring that all electronic components and products meet quality standards before they are released to customers. • Conduct visual inspections of electronic components and products to ensure they meet quality standards, • Perform functional tests on electronic devices to verify proper operation, • Document and report any defects or issues found during inspections, • Collaborate with production team to address and resolve quality issues, • Maintain accurate records of inspection results and quality control data, • High school diploma or equivalent, • Previous experience in quality control inspection in electronics manufacturing industry, • Strong attention to detail and ability to identify defects in electronic components, • Knowledge of quality control standards and procedures, • Excellent communication and teamwork skills PIa56dfc4a311a-37820-39006977

Job Description Position Summary: Certified Welder must have certification to AWS D17.1D17.1M D1.1 or equivalent Fusion Welding for Aerospace application Specifications, and CWI certification. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Ability to operate GTWA and GMAW Welding Machines. · Able to Weld thin Aluminum 035-060 and Steel. · Able to understand basic measurements using calipers. · Basic understanding of welding symbols per AWS 2.4. · Advanced Blueprint reading. · Must own all tools to complete jobs, welding helmet, gloves, clamps, pliers etc. · Must be able to set-up own jobs, support welding team, train, and approve jobs. Competencies: To perform the job successfully, an individual should demonstrate the following. Communications - Exhibits good listening and comprehension. Expresses ideas and thoughts in written form. Expresses ideas and thoughts verbally. Keeps others adequately informed. Selects and uses appropriate communication methods. Customer Service - Displays courtesy and sensitivity. Manages difficult or emotional customer situations. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service. Dependability - Commits to doing the best job possible. Follows instruction. Keeps commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions. Planning & Organization - Integrates changes smoothly. Plans for additional resources. Prioritizes and plans work activities. Sets goals and objectives. Uses time efficiently. Works in an organized manner. Quality - Fosters quality focus in others. Improves processes. Measures key outcomes. Sets clear quality requirements. Solicits and applies customer feedback. Use of Technology - Adapts to new technologies. Demonstrates required skills. Keeps technical skills up to date. Troubleshoots technological problems. Uses technology to increase productivity. Requirements Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience: MIG welding: 10 years (Preferred) • Tig Welding: 10 years (Preferred) License/Certification: • Certified Welding Inspector (Required) Education/Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Language Ability: Read and comprehend simple instructions, short correspondence and memos. Write simple correspondence. Effectively present information in one-on-one and small group situations to customers, clients and other employees. Must know how to read and write English language. Mathematical Ability: Add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Compute rate, ratio and percent, and draw and interpret bar graphs. Reasoning Ability: Apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Deal with problems involving a few concrete variables in standardized situations. Computer Skills: Basic Certificates and Licenses: High School Diploma or GED, AWS D17.1D17.1M D1.1 Mig & Tig welding. Supervisory Responsibilities: Yes Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be comfortable working in a warehouse environment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to list up to 40 lbs. Must be able to work in a standing position up to 8 hours per day. Benefits • 401(k), • Dental insurance, • Employee assistance program, • Employee discount, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Parental leave, • Retirement plan, • Vision insurance

Job Description Location: SoCal Region G3 Quality is looking for experienced Field Construction Materials Testing Technicians for projects throughout the Southern California region. We are seeking candidates who demonstrate a strong work ethic with a professional attitude. The ideal candidate will have asphalt coring, concrete testing, and nuclear gauge usage experience for a civil engineering or materials testing company. Responsibilities • Timely documentation of all testing activities and observations., • Daily coordination with Client and Contractor representatives., • Strict adherence to required test methods., • Performance of duties in a safe manner. Pay Scale • Local 12 Field Inspector: $64.18 - $67.96 an hour, • Local 12 Apprentice: $39.58 - $59.36 an hour, • Prevailing wage rates apply.Benefits, • Health & welfare and retirement/pension plans are offered through the union., • Union benefit links: OE12 Benefits, • G3 offers a 401k benefit plan, separate from the union plan. Position Requirements • Must be part of the Operating Engineers Local 12 union, or willing to join the union., • Physically able to regularly lift and /or move up to 75 lbs., • Valid drivers’ license., • Ability to read plans and specifications., • Nuclear gauge user HAZMAT certification., • Current Caltrans certification in various test methods relating to soil, concrete, and hot mix asphalt testing., • Other certifications are a plus (such as ACI, NICET, ICC, QSP). EEO Statement G3 Quality, Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. About the Company G3 Quality is a team of engineers and professional experts who’ve helped countless clients deliver successful infrastructure projects for the past decade. Through a mix of world-class Quality Management, Pavement Engineering, Inspection, and Materials Testing services, we are your partner every step of the way. Since 2013, we have built a strong reputation among contractors, design firms, construction managers, and local state and government agencies across the West Coast. Led by industry veterans Chris Gerber and Susan Pierce, our team has grown into a force of over 125 professionals since its inception, with a corporate office in Cerritos, California, and additional laboratories and offices in Bakersfield, Redlands, and Sacramento. Thank you for your interest in employment opportunities at G3. Powered by JazzHR QjRZOdFa2q

Job Description Join our Team! Our employees are thriving both inside and outside of the office. We are growing faster than ever, and it’s not because of what we do, but how we do it. It’s simple: our employees are our greatest asset. We value them and give them every reason to stay happy and motivated. We perform at high levels, fueled by an eclectic team. We boast a fun, energizing workplace with an emphasis on innovation, teamwork, quality work, and customer satisfaction. COMPENSATION AND BENEFITS • Salary Range: Competitive based on Individual Experience, • Medical, Dental & Vision Coverage, • 401 K Program, • $100K Life Insurance YOUR CAREER STARTS HERE! We have an immediate opening for a Quality Control Inspector—Fabrication. This position is for a person preferably with a minimum of 2 years relevant work experience. Tomarco Contractor Specialties LLP, (dba ISAT Total Support) is a pioneer in MEP subcontractor services, blending engineering expertise, manufacturing experience, and wholesale distribution. Since 1977, our commitment to innovation has led to cost reduction, faster installation, and a safer working environment for projects of all sizes worldwide. Our dynamic team of over 700 professionals specializes in MEP support design, technical VDC (Virtual Design and Construction), project management, detailing, project support, and more. We offer holistic solutions for projects of any size, and believe in a collaborative approach that streamlines the design and construction process, reducing project completion times. Workload: • Responsible for raw material and finished product quality control and quality assurance testing., • Develops and improves production processes. Instrumental in New Product Development., • Familiarity of mechanical testing and production processes is preferred. ESSENTIAL DUTIES (other duties may be assigned as required): • Conduct physical testing of Raw Materials and Finished Products, • Ensure proper recording and documentation of test results; completes Certificate of Analysis Forms, • Inspecting parts to drawing specifications, ensuring the parts are made with the correct materials, are cut, drill, form correctly, have the correct fasteners, are welded properly, and have the correct surface finish., • Reporting any discrepancies through a non-conformance report., • Working with fabrication to expediently correct mistakes to maximize quality and flow., • Generate weekly reports on first pass yield, quality escapes, and other related quality KPIs, • Ensure inspection work is done effectively, efficiently, and thoroughly., • Improves Processes and Procedures in Manufacturing with a focus on cost reduction and increased quality., • Maintain, analyze, and troubleshoot hardware, software, and computer peripherals for the Production and Test Lab Areas, • Set-Up and/or configure test apparatus, • Triage, resolve and escalate Quality Issues as needed, • Trains employees in company quality control procedures., • Make Suggestions for Improvement, • Prepare, organize, and submit technical documents and reports, • Maintain current technical knowledge and troubleshooting skills, • Keep a Clean and Organized Workplace, • Performs other duties as assigned KEY SKILLS: • High Level of Customer Service, • Good Time Management Skills, • Work Independently and as part of a team, • Excellent Communication Skills, • Exceptional attention to detail, • High standard of professionalism and accountability Education Requirements: High school diploma, GED, or equivalent. Good mechanical and welding skills, and a familiarity of commercial construction materials a plus. Trade knowledge and proficiency: Excel, Word, and Outlook. SolidWorks, AutoCAD, or inventor experience. Communication: Able to communicate in all forms of correspondence for tasks related to projects you are associated with. Further Qualifications: The successful candidate will also pass a background check Equal Opportunity Employer

Job Description The Industrial Hygienist is responsible for independently conducting environmental and hazardous materials monitoring, surveying, and sampling at residential, commercial, public, and industrial job sites. This role supports projects involving water and fire damage, demolition and renovation activities, indoor air quality concerns, and reported environmental complaints. The Industrial Hygienist evaluates conditions related to asbestos, lead-based paint, microbial contamination, and other environmental health hazards while ensuring full compliance with all applicable regulations. This position requires strong technical expertise, sound professional judgment, and the ability to work independently and accurately in the field. As a primary on-site representative of Titan Environmental Solutions, Inc., the Industrial Hygienist is expected to deliver a high level of professionalism and customer service, communicate technical findings clearly, and arrive on site within scheduled appointment times. The role requires flexibility for travel, night and weekend work, and variable job site conditions. Titan Environmental Solutions, Inc. prefers candidates holding Certified Asbestos Consultant (CAC) credentials, though qualified Certified Site Surveillance Technicians (CSSTs) with relevant field experience are also encouraged to apply. Requirements • Perform environmental and hazardous materials assessments at:, • Residential properties, • Commercial and private buildings, • Public and state-owned facilities, • Industrial sites, • Conduct sampling and monitoring activities related to:, • Water damage and fire damage incidents, • Hazardous material disturbances, • Demolition and renovation activities, • Elevated humidity and potential microbial growth conditions, • Perform surveys and assessments for:, • Asbestos-containing materials (CACs may lead and sign regulated projects), • Lead-based paint and lead hazards, • Mold, fungal, and bacterial contamination, • Indoor Air Quality (IAQ) complaints and investigations, • Evaluate client-reported environmental concerns and determine appropriate assessment methodologies, • Independently manage assigned field projects while adhering to Titan Environmental Solutions’ surveying and reporting standards, • Complete an average of up to six (6) limited surveys per day, depending on scope and site conditions, • Accurately collect samples, maintain proper chain-of-custody documentation, and submit field documentation promptly after each project, • Prepare clear, concise, and technically accurate written documentation and reports, • Communicate technical findings effectively, both verbally and in writing, to clients, contractors, and internal team members, • Maintain professionalism, punctuality, and a customer-focused approach at all job sites, • Arrive on-site within scheduled appointment windows outlined in work orders, • Follow all Titan Environmental Solutions safety policies and established field methodologies, • Comply with all applicable state, federal, and local environmental, health, and safety regulations Travel & Schedule Requirements • Frequent driving throughout Southern California to job sites and client meetings, • Willingness to travel out of town as project needs require, • Availability for night and weekend work, as needed, • If a monitoring assignment extends into a weekend, the employee is expected to manage the project through completion Required Certifications & Licenses Required (One of the Following): • California DOSH Certified Asbestos Consultant (CAC) (Strongly Preferred) OR • California DOSH Certified Site Surveillance Technician (CSST) Additional Required Certifications: • Current California Department of Public Health (CDPH) Lead Certification (Lead Monitor, Inspector/Assessor, or Sampling Technician) • Current NIOSH 582 Certification Other Requirements: • Valid California Real ID Driver’s License with a clean DMV driving record, • Ability to pass a background check, • Ability to pass annual respirator medical clearance and fit testing Physical & Environmental Requirements (Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.) • Ability to lift and carry up to 50 pounds, • Ability to climb ladders and stairs and access elevated or confined spaces, • Ability to crawl in tight or restricted areas to access building components, • Ability to stand, walk, bend, squat, kneel, sit, and climb for extended periods, • Ability to work in a variety of environmental conditions, including construction and industrial settings, • Strong time and priority management skills, • Self-motivated with the ability to work independently in the field, • Excellent technical writing and documentation skills, • Strong verbal communication skills and professional demeanor, • Proficiency with Microsoft Office and internet-based systems, • High attention to detail and accuracy, • Strong work ethic and accountability, • Ability to perform complex tasks and manage multiple priorities simultaneously, • Ability to perform effectively under high-stress and time-sensitive conditions, • Strong conflict management and negotiation skills, • Ability to work collaboratively in a team environment and across the organization, • Ability to follow company surveying methodologies while exercising professional judgment Language Requirement • Fluency in English (reading, writing, and comprehension) is required Benefits Compensation & Pay Transparency (California Compliance) Titan Environmental Solutions, Inc. reasonably expects to pay between $38.00 and $45.00 per hour for this position. Compensation will be determined based on certification level (CAC vs. CSST), experience, and job-related qualifications, in compliance with California pay transparency laws. Eligible employees receive paid holidays, paid vacation, and access to group health, dental, and vision insurance, as well as a 401(k) retirement savings plan, plus any applicable state mandated insurance benefits. Holiday and vacation eligibility, accrual, and scheduling follow company policy and plan documents.

Job DescriptionDescription: American Equipment Holdings, is one of the leading overhead crane solutions providers in the United States. Over the years, our ability to grow and set ourselves apart from the competition is the result of a tried and true philosophy – take care of our customers and take care of our people. We also believe that our people matter, which is why we are committed to providing our team members with competitive wages, attractive benefit offerings, and abundant training offerings. As one of the fastest growing companies in our industry, new opportunities are regularly available that enable our team members to develop, grow, and pursue their career passions. We are looking for a Mobile Crane Inspector for our Anaheim, CA branch. Responsibilities: • Perform on-site preventative maintenance, repairs, and modernizations on electric overhead traveling cranes, • Spend time consulting with customers on repair and safety related issues, • Troubleshoot equipment malfunctions and breakdowns., • Generate sales leads during service calls, • Accurately and neatly document on the service report for the work performed., • New crane wiring, assembly, installation, and start-up., • Maintain a clean and safe work environment., • Travel may be required. Work vehicle provided. Required Skills/Abilities: • Strong knowledge of AC/DC theory, as well as the ability to troubleshoot 480VAC 3 phase motor control systems. A.A. degree or Equivalent vocational-training or experience is preferred., • A minimum of 2-year hands-on electro-mechanical maintenance, • Aptitude for both electrical and mechanical environments as well as familiarity with mechanical and electrical equipment, • Willingness to work overtime, • Possession of a valid driver’s license with good driving record, • Must pass drug-screen and background check, • Strong communication skills, • Proven commitment to safety, • Comfort with working at heights, • Experience in Variable Frequency drives and PLC programming a plus, • Crane maintenance or inspection experience required, • Prefer CAL/OSHA Certification, but not required Schedule: • 8 hour shift, • Monday to Friday, • On call or Overtime possible Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. What we offer: We offer competitive compensation and benefits package, including health insurance, retirement plans, and paid time off. • Cigna Health Insurance (Kaiser in CA), • FSA & HSA healthcare employer contribution, • Critical Illness, Accidental, and Hospital Indemnity Plans, • Dental and Vision Plans, • Company paid STD & LTD Disability Insurance, • Educational and Tuition Reimbursement, • Maternity (12-wks) and Paternity leave, • Employee Assistance Program, • Basic & Voluntary Life AD&D, • 4% 401K Employer Match, with 6% of your Contribution, • Company Paid Time Off (PTO), • Company provided PPE, • Discounts on products and services, • Opportunities to network and connect American Equipment Holdings is an organization of leading overhead crane and hoist, industrial weighing, and below-the-hook service providers in the United States. Together, our companies provide comprehensive solutions for everything related to customers’ overhead crane and hoist, rigging, and weighing and measurement needs, including OSHA mandated inspections, preventative maintenance and repair field services, parts, engineering, ISO certified fabrication, new and replacement equipment, automated systems, system modernizations and training. American Equipment Holdings is one the largest and fastest growing companies in our space with more than 800 dedicated team members that serve thousands of customers throughout the United States. Our Commitment to Inclusion & Belonging: At American Equipment Holdings, we are dedicated to engaging with the widest possible range of talent. We believe that diverse perspectives drive innovation and engagement, enabling us to attract creative individuals and develop exceptional products, services, and solutions. We encourage all qualified candidates to apply. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Proof of right to lawfully work in the United States required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Requirements:

Job DescriptionDescription: Company: Kilter Termite and Pest Control Job Type: Full-Time Location: Orange Area Compensation • Annual earnings range: $70,000 – $135,000, • Weekly pay via direct depositJob Overview Kilter Termite and Pest Control is seeking driven, goal-oriented professionals to join our high-performing team. If you're a licensed Branch 3 Field Representative ready to take your career and earnings to the next level, we want to hear from you! Responsibilities As a Termite Sales Inspector, you will: • Represent the company with professionalism and punctuality, • Conduct thorough property inspections, • Generate leads, referrals, and self-sourced sales opportunities, • Follow up promptly on pending termite and pest control sales, • Recommend treatment plans and provide detailed estimates for services and repairs, • Ensure production is completed to the highest standards, • Continuously learn and adapt to improve performanceWhat You Bring To thrive in this role, you should be: • Customer-focused and personable, • Coachable and eager to learn, • Results-driven with a confident, positive attitude, • Comfortable with a structured sales process, • Skilled at building rapport with diverse personality types, • Proactive in closing sales and achieving targets, • Self-motivated and able to work independently, • Physically capable of lifting 35–40 lbs regularly, • Willing to work in crawl spaces, attics, and on laddersSchedule, • Full-time, • Monday through Friday, • Some Saturdays requiredBenefits, • Company vehicle (all expenses paid), • Paid training, • Company cell phone and uniforms, • 401(k) with company match, • Medical, dental, and vision coverage, • Paid vacation, holidays, and personal time off, • Career stability and advancement opportunitiesRequirements, • Valid Driver’s License with a clean driving record, • Active Termite Branch 3 Field Representative License This position is part of an ongoing recruitment to build a talent pipeline. Openings may not be immediate. Requirements: As a Sales Inspector at Kilter Termite and Pest Control, you’ll be instrumental in providing expert solutions and building trusted customer relationships. This role requires thorough property inspections—including attics and crawl spaces—and the ability to recommend effective treatment plans tailored to each client’s needs. Strong communication and problem-solving skills are essential. To be considered for this role, candidates must have: • Minimum 1 year of sales experience in the termite and pest control industry, • Active SPCB Branch 3 Field Representative License (required), • Proven success in in-home sales and customer engagement, • Valid driver’s license with a clean DMV record, • Ability to pass a background check and drug screening, • Professional appearance and demeanor

Job Description Fire Sprinkler Inspection & Repair Technician Avalon Fire Protection Avalon Fire Protection, a leader in the life safety industry, is seeking a skilled and motivated Fire Sprinkler Inspection & Repair Technician to join our growing team. This position is ideal for an experienced technician with a strong background in fire sprinkler systems and working knowledge of fire alarm systems. The successful candidate will perform inspections, testing, troubleshooting, repairs, and small tenant improvement (TI) projects while delivering exceptional customer service and ensuring compliance with applicable codes and standards. Key Responsibilities • Perform inspections, testing, maintenance, and repairs of fire sprinkler systems in accordance with NFPA 25, NFPA 13, local codes, and company standards., • Inspect, test, and troubleshoot wet, dry, pre-action, and associated fire suppression systems., • Perform service and repair work on fire sprinkler systems and related equipment., • Conduct fire pump inspections and operational testing., • Conduct fire hydrant flow testing and document results., • Identify deficiencies and recommend corrective actions., • Troubleshoot system issues and perform repairs efficiently and accurately., • Complete all required inspection reports, service documentation, and deficiency reports., • Maintain positive customer relationships through professional communication and service., • Ensure all work is completed safely, efficiently, and with high-quality workmanship., • Perform physical work including lifting, climbing ladders, using hand tools, and job site cleanup., • Represent Avalon Fire Protection professionally with customers, contractors, and the public., • Support additional service and installation activities as required by business needs. Qualifications Required Experience • Minimum of 4 years of experience performing fire sprinkler inspections, testing, maintenance, troubleshooting, and repairs., • Thorough knowledge of NFPA 25 and NFPA 13 requirements., • Strong mechanical aptitude and troubleshooting skills., • Ability to work independently with minimal supervision while also contributing as a team member., • Strong verbal and written communication skills., • Valid driver's license with a clean driving record., • High school diploma or GED equivalent. Preferred Qualifications • Experience performing fire alarm inspections, testing, troubleshooting, and service in accordance with NFPA 72., • NICET Certification (any level)., • California Fire/Life Safety Certification (Blue Card) and/or California Sprinkler Fitter Certification., • Experience installing and programming fire alarm systems., • Experience with fire sprinkler installation projects. Desired Traits • Organized, reliable, and self-motivated., • Customer-focused with excellent interpersonal skills., • Strong problem-solving and critical-thinking abilities., • Detail-oriented with a commitment to safety and quality., • Able to perform effectively in a fast-paced environment and meet deadlines., • Flexible and adaptable to changing priorities and project requirements. Physical Requirements • Ability to lift and carry equipment and materials., • Ability to climb ladders, work at heights, and access confined spaces when necessary., • Ability to stand, walk, bend, kneel, and perform manual labor throughout the workday. Work Schedule • Monday through Friday., • Typical start times as early as 6:00 AM and end times as late as 5:00 PM., • Occasional overtime, after-hours service, or weekend work may be required based on operational needs. Travel Requirements • Daily travel to customer sites throughout the service area., • Occasional travel between the primary office, branch offices, and project locations as required. Why Join Avalon Fire Protection? • Competitive compensation, • Career advancement opportunities, • Ongoing training and certification support, • Strong team-oriented culture, • Opportunity to work with industry-leading fire protection professionals Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance License/Certification: • Fitters Card (Preferred) Work Location: In person

Job Description Summary: Performs independent inspection functions to verify product conforms to specifications. Monitors processes, provides support to Operations and enforces quality policies, procedures and programs. Duties and Responsibilities: · Performs and documents a wide variety of inspections, checks, tests and sampling procedures from incoming receipt to packaging and distribution · Assists and support QA/QC Director in the oversight of QA activities and training · Monitors all aspects of production to assure adherence to cGMP and SOPs · Performs line clearance for removal of all previous products, components and foreign materials · Performs first article and in-process inspections · Communicates non-conformances to Supervisor and recommends corrective actions · Reviews documentation to assure accuracy and completeness · Performs reconciliation and closing of batch records · Assists management in conducting inquiries and investigations · Ensures timely release of finished goods · Maintains quality records, reports, logs, and retention samples · Coordinates destruction of expired records, documents and products · Assists in preparation of customer and regulatory audits · Performs other related duties as assigned by management Work Experience/Qualifications: · 2-3 years of relevant work experience required · Experience in the Dietary Supplement or Pharmaceutical industry is desirable · Working knowledge of cGMPs · General proficiency in using Microsoft Word, Excel and Outlook · Good verbal and written communication · Good interpersonal skills · Ability to work independently and in a team environment · Ability to follow instructions · Good attendance and punctuality · Must be flexible and able to work overtime when required · Good organizational skills/ attention to detail/ ability to work effectively in a fast-paced environment Education Requirements: · Minimum High School Diploma or equivalent · ASQ CQA and/or CHA certification preferred Work Environment: · The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts; fumes or airborne particles and risk of electrical shock. · The noise level in the work environment is usually moderate. · While in the plant, the employee is required to utilize the required personal protective equipment. Physical Demands: · The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Physical demands require sitting and walking for extended periods of time, bending, reaching, carrying, and occasionally lifting and/or moving objects up to 25 pounds. Specific vision abilities required by this job include close vision, peripheral vision and ability to adjust focus. While performing the duties of this job, the employee is required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl, and talk or hear.

Job Description:\n\n POSITION SUMMARY Compensation - $110,000 - $135,000 Titan Environmental Solutions is seeking an experienced Field Manager to lead, strengthen, and improve daily field operations, field staff development, quality assurance, safety compliance, resource planning, and operational excellence. This position is responsible not only for managing today's field operations, but also for helping design and build the future of Titan's field organization. The ideal candidate is an experienced environmental consulting professional and organizational leader with hands-on experience developing field personnel, guiding regulatory compliance, strengthening industrial hygiene, asbestos, lead, and environmental consulting operations, and building systems that support scalable growth. This position offers the opportunity to shape training, improve field execution, champion Titan's safety culture, strengthen quality systems, develop the next generation of field leaders, and play a meaningful role in Titan's continued growth. ABOUT TITAN Titan Environmental Solutions is a collaborative, team-oriented environmental consulting organization headquartered in Fullerton, California. Titan provides technical environmental consulting, industrial hygiene, hazardous materials, regulatory compliance, and field support services to clients across Southern California and beyond. Titan is committed to developing employees, strengthening field leadership, improving operational systems, and creating opportunities for experienced professionals to lead teams, mentor staff, inspire accountability, and contribute to the continued growth of the organization. OPPORTUNITY HIGHLIGHTS · Lead, coach, mentor, and develop field technicians, inspectors, project monitors, and industrial hygiene personnel. · Strengthen a collaborative, team-oriented culture focused on accountability, professionalism, safety, quality, and continuous improvement. · Help build staffing workflows, field documentation standards, safety practices, equipment readiness systems, operational execution processes, and leadership development pathways. · Partner with Operations, Dispatch, Project Managers, Special Projects, and Business Development to strengthen project delivery and client service. · Influence professional growth, leadership development, AI integration, quality systems, and future field leadership pathways within Titan. BUILD THE DEPARTMENT As Titan continues to grow throughout California, the Field Manager will play a critical role in developing the systems, people, safety culture, quality expectations, and operational standards that support future expansion. This position offers the opportunity to build something meaningful by influencing training, operational processes, leadership development, AI integration, quality systems, and the future direction of Titan's field organization. KEY RESPONSIBILITIES Field Operations Management · Lead, coach, and develop field technicians, inspectors, project monitors, and industrial hygiene personnel. · Direct staffing assignments, assign field resources, guide field coverage, and lead project alignment in partnership with Dispatch and Operations. · Direct daily field activities, resolve scheduling, staffing, communication, and operational challenges, and strengthen accountability across the field team. · Prepare field personnel with the equipment, guidance, and project direction needed to execute assignments successfully. · Lead emergency response, expedited projects, and shifting operational priorities while maintaining safety, quality, and client service standards. Staff Development and Leadership · Recruit, train, mentor, coach, and develop field personnel to support technical excellence and employee growth. · Build onboarding, hands-on field training, ongoing technical training, mentorship practices, and refresher coaching programs for field staff. · Lead field audits, quality checks, coaching conversations, performance evaluations, and development plans that strengthen individual and team performance. · Inspire accountability, professionalism, teamwork, safety, client service, and continuous improvement. · Identify, mentor, and develop the next generation of field leaders within Titan. Quality Assurance and Compliance · Lead and strengthen field activities in alignment with Titan procedures, project scopes, client requirements, and applicable regulatory requirements. · Strengthen the accuracy and completeness of field documentation, including photo logs, sample records, chains of custody, field notes, daily logs, and related project documentation. · Identify recurring field deficiencies, documentation gaps, quality trends, and training opportunities, and build corrective actions that strengthen field performance. · Partner with Project Managers to strengthen regulatory compliance, project readiness reviews, field planning, and documentation follow-up. · Champion consistent quality standards, reduce report production delays caused by incomplete or inaccurate field documentation, and strengthen field execution from project start through closeout. Regulatory Knowledge Apply and strengthen working knowledge of applicable federal, state, and local regulations and requirements, including: · EPA NESHAP · AHERA · Cal/OSHA asbestos and lead standards · OSHA standards · SCAQMD Rule 1403 · California Air District notification requirements · Industrial hygiene and exposure assessment requirements Safety and Equipment Management · Champion and strengthen Titan's Health and Safety Program, field safety culture, and daily safety expectations. · Lead safety meetings, field inspections, incident reviews, coaching conversations, and corrective action follow-up that reinforce safe work practices. · Strengthen equipment inventory, maintenance, calibration, readiness, and availability for field assignments. · Build reliable systems so vehicles, PPE, sampling equipment, monitoring equipment, and field tools remain operational, organized, and compliant. · Model safe work practices, inspire field accountability, and reinforce compliance with company safety procedures and applicable regulations. Operational Improvement · Identify operational bottlenecks, staffing challenges, documentation issues, safety trends, quality gaps, and opportunities to improve systems. · Build and improve field SOPs, digital field tools, AI initiatives, training programs, leadership development practices, and standardized workflows. · Strengthen communication between field staff, project managers, dispatch, operations, and special projects. · Recommend improvements that strengthen field utilization, turnaround times, documentation quality, safety performance, and client service. · Help build and improve scalable field operations that leave Titan stronger, more consistent, and better prepared for continued growth throughout California. SAFETY, QUALITY, AND OPERATIONAL LEADERSHIP Champion Titan's safety culture by modeling safe work practices, reinforcing field expectations, and developing employees who understand the importance of regulatory compliance and risk awareness. Drive field quality by strengthening documentation practices, coaching employees on project standards, identifying recurring gaps, and building corrective actions that improve future performance. Strengthen operational accountability by improving communication, clarifying expectations, developing field leaders, and supporting scalable systems for continued growth. DECISION-MAKING AUTHORITY The Field Manager is empowered to: · Direct daily field operations. · Assign field resources. · Coach and develop field employees. · Recommend disciplinary actions. · Recommend hiring and promotions. · Identify process improvements. · Recommend staffing and operational changes. This role has clearly defined responsibility, authority, and accountability for strengthening Titan's field organization, improving field execution, and supporting operational excellence. SUCCESS IN THIS ROLE WILL BE MEASURED BY · Field staff utilization, productivity, and effective resource coordination · Employee retention, development, accountability, and leadership growth · Quality, completeness, and consistency of field documentation · Safety culture, safety performance, regulatory compliance, and incident follow-up · Equipment readiness, maintenance, calibration, and field preparedness · Client satisfaction and timely completion of field assignments · Reduction of report production delays related to field operations · Contribution to operational improvements, training initiatives, AI integration, leadership development, and workflow enhancements Requirements IDEAL QUALIFICATIONS Required · Minimum of 5 years of environmental consulting experience. · Minimum of 2 years of people leadership, field leadership, or operations leadership experience. · Strong knowledge of asbestos, lead, industrial hygiene, hazardous materials, and environmental compliance. · Experience leading field personnel, assigning field resources, strengthening regulatory compliance expectations, driving quality assurance, and improving operational execution. · Strong organizational, communication, coaching, and leadership skills. · Ability to lead multiple projects, field assignments, personnel needs, operational priorities, and deadlines simultaneously. · Valid California Driver's License and ability to travel to project sites as needed. Preferred · Cal/OSHA Certified Asbestos Consultant (CAC) certification. · Certified Site Surveillance Technician (CSST) certification. · Lead Inspector/Assessor Certification. · OSHA 30-Hour Certification. · Industrial hygiene experience, including exposure assessment or sampling experience. · Experience working across multiple California Air District jurisdictions. · Experience developing SOPs, training programs, field quality standards, or operational improvement initiatives. · Prior leadership experience in environmental consulting, industrial hygiene, asbestos, lead, hazardous materials, regulatory compliance, or related technical field services. LEADERSHIP EXPECTATIONS The Field Manager is expected to lead by example, develop field personnel, inspire accountability, champion Titan's safety culture, drive quality, strengthen operational performance, and support Titan's commitment to exceptional client service, technical excellence, safety, and regulatory compliance. The successful candidate will be comfortable coaching employees, solving operational challenges, improving workflows, developing the next generation of field leaders, and leaving Titan's field organization stronger than they found it. Benefits WORK ENVIRONMENT This is a full-time, in-office and field-based position based at Titan Environmental Solutions' Corporate Headquarters in Fullerton, California. This position is not remote. The role operates in a professional office environment and may also require regular work at client sites, field project locations, construction environments, occupied buildings, and other project-related settings. In accordance with the Americans with Disabilities Act (ADA) and California law, reasonable accommodations will be provided to enable qualified individuals with disabilities to perform the essential functions of the role. The role may require: · Prolonged periods of sitting, standing, walking, and working on a computer. · Frequent communication with field staff, clients, operations teams, project managers, and external partners. · Travel to project sites and occasional work in field environments where PPE may be required. · Occasional bending, reaching, climbing, kneeling, and lifting or carrying equipment up to 50 pounds. · Use of standard office equipment, vehicles, sampling equipment, monitoring equipment, PPE, phones, and computers. EQUAL EMPLOYMENT OPPORTUNITY STATEMENT Titan Environmental Solutions, Inc. is an Equal Opportunity Employer and complies with all applicable federal, state, and local employment laws, including the California Fair Employment and Housing Act (FEHA). The Company does not discriminate against applicants or employees on the basis of race (including traits historically associated with race such as hair texture and protective hairstyles), religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 and over), sexual orientation, military and veteran status, or any other protected characteristic under applicable law. Titan Environmental Solutions, Inc. is committed to providing a workplace free from unlawful discrimination, harassment, and retaliation. AT-WILL EMPLOYMENT STATEMENT Employment with Titan Environmental Solutions, Inc. is at-will, meaning that either the employee or the Company may terminate the employment relationship at any time, with or without cause or notice, subject to applicable laws. Nothing in this job description or any other Company document should be interpreted as creating a contract of employment.

Job Description We are looking for entry-level QA Inspectors to join our team! This individual conducts independent inspection functions to verify product conforms to specifications. The QA Inspector must be highly detailed, have good communication (oral and written), and have good computer skills. This individual monitors and provides support to Operations, and enforces cGMPs and SOPs. Responsibilities: • Performs and documents a wide variety of inspections, checks, tests, and sampling procedures during the manufacturing process., • Performs line clearance for the removal of all previous products, components, and foreign materials., • Approves workstations for readiness before use., • Monitors all aspects of the manufacturing operations and reports non-conformance to the Supervisor/Manager, • Reviews documentation to assure accuracy and completeness Qualifications: • High School diploma/GED., • Minimum 6 months -1 year of relevant work experience preferred, willing to train the right individual., • Must demonstrate proficiency in English, verbal, and written skills., • Highly organized and detail-oriented. What We Offer: • Competitive wages, starting $18.00-$23.00/hour, depending on experience., • Medical & Dental (company pays 75% of employees' HMO plans), • Discounted Vision, • 401k - match up to 3% of annual salary, • Paid Holidays, • Vacation Days, • Sick Days Our Human Resources Team will contact applicants who meet the selection criteria and best match the qualifications for an open position, either by phone or email. If your skills and experience align with our current hiring needs, we will contact you regarding the next steps in the recruitment process. PLEASE NOTE: Only applicants selected to move forward in the recruitment process will be contacted. Robinson Pharma is committed to providing equal employment opportunities without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic in accordance with applicable laws. This commitment applies to all aspects of employment, including recruitment, hiring, promotion, compensation, and other terms and conditions of employment. Robinson Pharma also takes affirmative action to support the employment and advancement of minorities, women, individuals with disabilities, and protected veterans. Robinson Pharma, Inc. may conduct a background check through a third-party vendor as part of the hiring process. Following acceptance of an employment offer, candidates may be required to complete and submit authorization, consent, and release forms for the background investigation. Employment with Robinson Pharma is at-will and may be terminated at any time, with or without cause or notice, by either the employee or the Company, subject to applicable law. Company DescriptionWe are a full-service contract manufacturer of softgels, tablets, capsules, powders, gummies and liquids for dietary supplements and personal health care.We are a full-service contract manufacturer of softgels, tablets, capsules, powders, gummies and liquids for dietary supplements and personal health care.

Job DescriptionConstruction Inspector - TransportationOwn Your Future at Psomas Join a 100% employee-owned firm built for long-term thinking, shared success, and meaningful impact. As our Construction Inspector - Transportation for our Construction Management team in Santa Ana, you'll play a critical role in supporting project delivery, ensuring construction quality, and contributing to infrastructure projects that impact local communities. Why Psomas • Shared Success: An ownership culture that rewards long-term thinking and doing what's right., • Retirement Benefits: Company-funded ESOP + 401(k) with immediate match., • Career Growth: Clear pathways, training, and professional development opportunities., • People-First Culture: Collaborative teams that invest in your development., • Meaningful Work: Infrastructure projects that improve transportation systems and communities.What You'll Do As a Construction Inspector - Transportation, you will support construction projects from initiation through completion, ensuring compliance with plans and specifications while collaborating with project teams and stakeholders. • Construction Inspection & Compliance Perform daily site inspections to verify work complies with approved plans, specifications, and applicable codes. • Project Coordination & Communication Coordinate activities with clients, contractors, consultants, designers, and regulatory agencies to support project progress and compliance. • Documentation & Reporting Prepare daily inspection reports, including detailed documentation and progress photos. • Schedule & Progress Monitoring Review contractor schedules and monitor progress to ensure alignment with project timelines. • Change Management & Cost Support Track potential change order issues, document disputed work, and assist with evaluating and recording changes. • Quantities & Payment Support Assist with monthly pay estimates, including measuring and documenting quantities for completed work.Required Qualifications • 10+ years of experience in bridge, roadway, highway, or related public works construction inspection, • High School Diploma or equivalent, • Prior experience with Caltrans projects, • Experience inspecting public works for local agencies, municipalities, or utilities, • Ability to read and interpret construction plans, drawings, and specifications, • Ability to work on-site in active construction environments, including walking uneven terrain, climbing, and working in varying weather and site conditionsCompensation & Benefits, • Hourly Rate: Prevailing wage for Santa Ana is $65.96/hour, • Incentives: Discretionary bonus and recognition programs, • Time Off: 3 weeks PTO plus 8 paid holidays, • Total Rewards: Comprehensive medical, dental, and vision coverage for you and your family, along with employee ownership and retirement benefitsOur Hiring Approach Our recruiting team reviews every application personally and will keep candidates informed throughout the process. If a candidate's background aligns with what we need, we'll reach out to discuss next steps. Equal Opportunity Employer We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Job Posted by ApplicantPro

Job Description Are you driven to grow, lead, and make a meaningful impact? At Apex, we're building more than a consulting and engineering firm—we're creating a place where your career accelerates, your contributions matter, and your potential is fully realized. We believe your growth is our growth, which is why we invest in your development at every stage of your career. Here, you'll work on projects that shape communities, protect the environment, and create lasting impact, all while being empowered with the autonomy and flexibility to do your best work. Fueled by high quality delivery, exceptional client retention, and strategic acquisitions, Apex Companies continues to rank among the fastest-growing firms in the AEC industry, recently recognized by the Zweig Group for our industry-leading growth. Our success is grounded in strong leadership, a collaborative culture, and a shared commitment to delivering exceptional outcomes. As we continue to grow, we're focused on building a team of high-performing professionals who are ready to lead, collaborate, and push what's possible. At Apex, you don't just join a company, you help shape what comes next. Environmental Scientist/Industrial Hygienist Locations: Los Angeles or Orange County | ~50% field / 50% remote Apex is seeking an environmental professional with experience in industrial hygiene to perform asbestos, lead-paint, mold/moisture intrusion, exposure assessment, abatement monitoring, and related industrial hygiene and EHS compliance projects across Southern California. Employee Benefits This role offers competitive compensation and a robust benefits package, a balanced mix of fieldwork and report writing, company sponsorship for professional and vocational training, work from home opportunity, collaboration with other industrial hygiene, EHS and other experts, and continued professional development and growth afforded by a rapidly growing national environmental consulting company. Key Responsibilities • Perform asbestos, lead-based paint (LBP), and microbial/moisture intrusion assessments, along with abatement oversight, with an approximate 50/50 split between field and office work, • Conduct safety and compliance assessments in accordance with regulatory standards and client requirements, • Support additional environmental services through cross-training, including:, • Exposure assessments, • Workplace safety evaluations, • Stormwater compliance inspections, • Soil and groundwater sampling, • Noise and air monitoring, • Aboveground Storage Tank (AST) inspections, • Execute work in alignment with project work plans, standard operating procedures (SOPs), and direction from project managers, • Manage scheduling and logistics across all project phases, from coordination and fieldwork through reporting, • Prepare clear, accurate, and technically sound client-ready reports using project-specific templates, • Collaborate with internal teams to support project delivery and ongoing professional development, • Maintain and proactively pursue relevant certifications, including 40-Hour HAZWOPER, CAC, and/or CSST Qualifications • 2+ years of professional experience conducting asbestos surveys and mold/moisture intrusion inspections as an AHERA-accredited inspector (in any state), • Current AHERA certification required, • California Certified Asbestos Consultant (CAC) and/or Certified Site Surveillance Technician (CSST) preferred, • Bachelor's degree in Environmental Science, Industrial Hygiene, Microbiology, or a related field What We're Looking For • Self-motivated and dependable professional who can work effectively with limited supervision, • Strong technical writing and critical thinking skills, • Solid analytical and math skills for interpreting laboratory data and preparing reports, • Excellent attention to detail with the ability to manage multiple projects and deadlines, • Strong interpersonal skills and ability to collaborate in a team-oriented environment, • Physically capable of performing fieldwork and comfortable working in both field and office settings, • Commitment to safety and a strong understanding of safe work practices, • Interest in growing within industrial hygiene and expanding into broader environmental consulting services Why you'll love working for us: • Company-subsidized medical and dental., • Company-paid life, short, and long-term disability., • 401k match, tuition assistance, and more., • Cross-training and the ability to work on a variety of projects., • Performance-based bonuses or other incentives., • Working with the best and brightest in the industry., • 2,000+ employee national firm with 70+ locations across the US.Apex Job Title: Scientist 2 - Project Scientist Req ID: 11507 Annual Expected Pay Range$75,000—$85,000 USD We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact Talent@apexcos.com or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Facility Location The United States Attorney's Office Central District of California Orange County Office 411 W. 4th St. Suite 8000 Santa Ana, CA 92701-4540 Position Information NON-SCHEDULED DAYS: Saturday/Sunday HOURS: 09:00 A.M. to 05:00 P.M. BENEFIT INFORMATION: The salary will be based on previous experience and current postal pay policies. We offer excellent benefits including health and life insurance, retirement plan, savings/investment plan with employer contribution, flexible spending, flextime scheduling of core work hours, annual and sick leave. Functional Purpose Serves as Special Assistant U.S. Attorney while litigating mail theft and other complex cases as designated by the Chief Inspector or designee for an assigned division/ geographic region of the U.S. Postal Inspection Service. DUTIES AND RESPONSIBILITIES 1. Represents the United States Postal Service in the prosecution of federal crimes., 2. Develops and recommends strategies and coordinates the preparation of litigation for mail theft, mail fraud and other complex cases., 3. Performs all aspects of criminal discovery, motions practice, trials and appeals., 4. Meets with defense attorneys in advance of trial to conduct pre-trial conferences and negotiations., 5. Works closely with postal inspectors and other law enforcement agents, witnesses and victims during criminal investigations, trial preparation and all phases of litigation., 6. Conducts legal research. Prepares memoranda and briefs on questions of law. Prepares pleadings. The United States Postal Service has the following excellent and challenging employment opportunity for highly motivated and innovative individuals. Successful candidates must demonstrate through a combination of education, training, and experience the following requirements: Requirements 1. Ability to conduct legal research to gather and interpret information and ensure accuracy of details, using resources such as internal and external documents, archives, electronic databases, and interviews. 1. Ability to provide legal advice and services and to formulate opinions involving the analysis and interpretation of federal, state, and local laws., 2. Ability to litigate cases before federal courts., 3. Ability to communicate orally and in writing, including the ability to negotiate with third parties on behalf of clients and to prepare legal documents and presentations., 4. Ability to obtain and maintain status as Special Assistant U.S. Attorney., 5. SPECIAL CONDITION: Qualified applicants must be active members of the State Bar of California, licensed and in good standing., 6. EXPERIENCE REQUIREMENT: At least three years of experience in legal practice, of which one year may be met through the completion of a judicial clerkship. The clerkship must be documented in the applicant's resume., 7. SPECIAL CONDITIONS: Applicant must submit to a Tier 5 Single-Scope Background Investigation (SSBI) and a Sensitive Compartmented Information (SCI) if required. This investigation requires, among other things, completion of a questionnaire and fingerprinting for a criminal records check. The investigation may require a drug test. The successful applicant will be required to obtain and maintain a Top Secret or Top Secret/SCI clearance while holding this position., 8. EDUCATION REQUIREMENT: Applicants must have a Juris Doctor degree from an American Bar Association accredited law school. Relocation benefits will not be offered to the successful candidate. Qualified applicants must successfully pass a pre-employment drug screening to meet the U.S. Postal Service's requirement to be drug free. Applicants must also be a U.S. citizen or have permanent resident alien status.

Overview:\n Performs and supervises crew members in the inspection, mechanical maintenance and repair of Park rides. Supervises inspections, maintenance, and repairs with all ride attractions and equipment. Responsible for maintenance records and ensuring documents are accurate and complete. \n \n Salary Details: $70,304 / yr - $90,500 / yr, based on overall experience. \n \nResponsibilities:\n\n • Supervises subordinate crew members; supervisory duties include scheduling; instructing; assigning, reviewing and planning work of others; maintaining standards; coordinating activities; allocating personnel; selecting new employees; acting on employee problems, recommending and approving employee discipline, and recommending employee discharge.\n, • Inspects rides; troubleshoots mechanical problems on rides and assists subordinate mechanics with repair work as required. Designs parts and components as necessary.\n, • Determines preventive maintenance schedules; ensures prompt response to work orders.\n, • Inspects all in house and contracted work in progress and completed for compliance with policies, procedures, regulations, specification, and standards of quality and safety. Coordinates maintenance projects with other Park departments, contractors, and ride manufacturers as necessary.\n, • Ensures the proper maintenance and safe operating condition of all assigned equipment. Receives and reviews various records and reports including inspection records, various logs, schedules, work orders, downtime reports, rehab reports, accident/incident reports, guest complaints, invoices, price quotes. specifications, etc.\n, • Prepares and/or maintains purchase orders, performance appraisals, schedules, inspection reports, various logs, budget reports, downtime reports, incident/accident reports, safety meeting agendas, work orders, memos, various other reports, etc.\n, • Operates a vehicle, various rides and related mechanical/pneumatic/hydraulic/electrical control systems, overhead crane, forklift, man lift, hydraulic press, air compressor, diagnostic equipment, welding equipment, generators, steam cleaners, sand blaster, and a variety of equipment such as a computer, copier, fax machine, calculator, telephone, two way radio, camera.\n, • Uses computer and clerical supplies, meters, gauges, measuring devices, mechanic's tools, measuring devices, hoists, climbing equipment, drafting tools, various other hand and power tools, etc.\n, • Interacts and communicates with various groups and individuals such as the immediate supervisor, other Park managers and staff, subordinates, guests, vendors, contractors, inspectors, manufacturer representatives, etc.\n\n \nQualifications:\n\n • High School Diploma or GED.\n, • Vocational / technical training in maintenance/mechanics preferred. \n, • NAARSO LEVEL 1 RIDE INSPECTOR certification preferred.\n, • AIMS Level 1 certification preferred. \n, • 4 to 6 years of verifiable experience in mechanical maintenance, preferably in an industrial or amusement setting.\n, • At least 1 to 3 years of prior leadership experience.\n, • Valid Driver's License.\n, • Ability to work nights, weekends and holiday periods to meet business needs. Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law.\n, • Ability to pass a background check, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law.\n

This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $85,000 - $100,000 per year A bit about us: Trusted leader in designing, engineering, and supporting heavy-duty material handling and defense equipment. With decades of proven expertise, we provide mission-critical solutions that keep military, industrial, and commercial operations moving safely and efficiently. Our commitment to innovation, reliability, and customer support ensures that the toughest jobs get done—no matter the environment. Why join us? Become part of a team that builds equipment trusted in the most demanding environments. We value innovation, craftsmanship, and collaboration—empowering our people to solve complex challenges and make a real impact. With competitive pay, comprehensive benefits, and room to grow, we invest in our employees just as much as we invest in our products. If you’re looking for a career where your work matters. Job Details Job Details: We are seeking a highly skilled and experienced Permanent Certified Weld Inspector to join our dynamic team in the Manufacturing industry. This role is integral to ensuring the quality and safety of our welding projects. The successful candidate will be responsible for inspecting and approving all welding work, identifying and rectifying potential issues, and ensuring compliance with all relevant regulations and standards. This position requires a keen eye for detail, strong technical knowledge, and a commitment to excellence. Responsibilities: 1. Perform regular quality inspections on all welding work, ensuring compliance with national and international standards., 2. Identify, report, and rectify any defects or non-compliance issues in the welding work., 3. Conduct root cause analysis to identify the source of any defects or failures and implement corrective actions to prevent recurrence., 4. Collaborate with the welding team and other departments to ensure the overall quality and safety of our products., 5. Maintain detailed records of inspections, findings, and corrective actions., 6. Stay updated with the latest developments in welding technology, techniques, and safety standards., 7. Train and mentor junior inspectors and welders, fostering a culture of continuous learning and improvement., 8. Participate in project planning and pre-construction meetings to provide insights on potential welding issues and solutions. Qualifications: 1. A minimum of 5 years of experience as a Certified Weld Inspector in the Manufacturing industry., 2. Certified Welding Inspector (CWI) certification from the American Welding Society (AWS) or equivalent., 3. Proven experience in quality assurance and root cause analysis., 4. In-depth knowledge of welding techniques, materials, and equipment., 5. Strong understanding of national and international welding standards and regulations., 6. Excellent problem-solving abilities and attention to detail., 7. Ability to communicate effectively with team members at all levels., 8. Proficiency in using inspection tools and software., 9. Physical stamina and the ability to work in various conditions and environments., 10. A commitment to safety, quality, and continuous improvement. Join our team and play a crucial role in maintaining the high standards of quality and safety that our clients have come to expect from us. This is a fantastic opportunity for a seasoned Certified Weld Inspector to make a significant impact in a leading manufacturing company. If you have the necessary skills, experience, and dedication to excellence, we would love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Precision Aerospace Manufacturer offering 2nd shift + great benefits, culture and atmosphere! This Jobot Job is hosted by: Ba Tran Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $35 per hour A bit about us: We're a trusted leader in the aerospace, defense, and industry for over 50 years. Specializing in precision manufacturing, the company excels in delivering high-performance products and services to all of our customers. With a focus on overcoming the unique challenges of low-volume runs, our reputation is built on our ability to respond quickly and effectively to complex production and cost challenges, ensuring sustainable growth and excellence in industrial manufacturing. Why join us? • Competitive Compensation and Benefits Package (Medical + Dental + Vision + Life + Retirement Savings Plan and more!), • Long term and stable position w/ opportunity for growth, • Join a well established company who is invested in your growth and success, • We are expanding and will have plenty of opportunities right here in Orange County, CA!, • Rewarding work and responsibilities, • Paid Time Off, Sick Pay Job Details Position Overview We are seeking a detail-oriented Quality Inspector to support precision manufacturing operations within the aerospace and defense industry. This role is responsible for ensuring components and assemblies meet engineering drawings, customer specifications, and industry quality standards through thorough inspection and documentation processes. Key Responsibilities: • Utilize precision measuring instruments to inspect machined components and assemblies to engineering drawings and customer specifications, • Interpret blueprints, technical drawings, heat treat specifications, plating requirements, welding standards, and related documentation, • Perform incoming, first article, in-process, and final inspections on aerospace-grade components and assemblies, • Generate and document non-conformance reports and assist with corrective action activities, • Ensure compliance with AS9100 quality standards and internal quality procedures, • Verify manufacturing routing and documentation accuracy throughout inspection processes, • Complete inspection records and maintain accurate quality documentation within ERP/MRP systems, • Coordinate with suppliers and internal teams regarding quality discrepancies and corrective actions, • Generate First Article Inspection Reports (FAIRs) in accordance with AS9102 requirements, • Prepare final inspection and certification documentation for customer shipments Essential Functions: • Perform inspections using calipers, micrometers, thread/ring gauges, and other standard precision measuring equipment in a fast-paced manufacturing environment, • Conduct inspections using Coordinate Measuring Machines (CMM) and develop inspection programs, • Perform automated optical inspections using advanced vision measurement systems and create inspection routines, • Interpret complex aerospace drawings and specifications while applying appropriate inspection methodologies, • Inspect incoming raw materials and monitor shelf-life controlled products, • Collaborate effectively with production, engineering, and manufacturing personnel, • Support internal quality audits and continuous improvement initiatives, • Qualifications & Competencies, • Strong understanding of blueprint reading, customer specifications, and aerospace industry standards, • Working knowledge of GD&T (Geometric Dimensioning & Tolerancing), • Ability to perform arithmetic, geometric, and algebraic calculations, • Experience with CMM programming and inspection preferred, • Strong written and verbal communication skills, • High attention to detail and commitment to quality, • Positive attitude with the ability to work effectively in a team-oriented environment Preferred Experience • Experience in aerospace, defense, precision machining, or regulated manufacturing environments, • Familiarity with AS9100 and AS9102 standards, • Experience using ERP/MRP systems and quality documentation software Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Here, we craft excellence together. Your mission? Making the journey the most enjoyable part of the trip. Join our first-class team to reinvent in-flight experience. In the role of Manager, Quality Control you'll play a pivotal part on our Quality team. This Quality Control Manager assists the Senior Manager or Director of Quality in planning, coordinating, and directing the quality inspection program, designed to ensure continuous production consistent with established standards. Coaches, assists and supports co-workers and direct reports in the testing and inspection of materials and processes at various stages of production and evaluates results and/or statistical data to determine and maintain quality and reliability of products by performing the following duties. This position contributes to our vision by: • Directly supervise 1 to 15 employees in the Quality Department. Direct subordinates, engaged in inspection and testing activities, to ensure continuous control over materials and products., • Ensure that production and supplier product are inspected and discrepancies corrected prior to shipping the units out of the facility., • Participate in First Article Inspections - interfacing with customers, airframe manufacturers and/or the Federal Aviation Administration on applicable Quality issues and ensuring First Article submissions are in accordance with customer specifications and established procedures., • Prepare and/or support corrective action requests (CAR) on nonconforming issues when appropriate., • Formulate and maintain quality inspection objectives and coordinate objectives with production procedures, in cooperation with the management team to maximize product reliability and minimize costs., • Support Drawing Change Requests on nonconforming issues., • Participate in the Material Review Board as needed., • Investigate customer complaints regarding quality., • Select products/materials for tests at various stages in the production process, and test products in such areas as: dimensions, performance, mechanical, electrical, or chemical characteristics., • Interpret engineering drawings, schematic diagrams and confer with management and/or engineering staff to determine quality and reliability standards., • Audit production areas to verify parts are organized and labeled in the work area and to verify that measuring devices and tools are calibrated regularly., • Evaluate data and generate reports to validate or indicate deviations from existing standards., • Analyze internal reports, records and customer information applicable to Quality., • Assist manufacturing personnel with drawing interpretation and workmanship criteria., • Perform all other duties as assigned. Qualifications: Education: Bachelor's Degree require or equivalent Experience: Minimum of ten (10) years' experience as an inspector in a quality control or inspection department. Minimum of two (2) years leadership experience. Computer Skills: • Basic knowledge Microsoft Office (Word, Excel, PowerPoint) Other Skills: • Effective oral and written communications skills • Demonstrated ability to handle multiple projects and assignments with attention to detail • Problem solving, well organized, detailed oriented and accurate. • Demonstrated knowledge and proficiency in working with ISO, Boeing, Airbus, FAA, CAA regulations • Ability to correctly interpret engineering drawings • Proficiency in the use of measuring equipment, such as tape measures, micrometers and calipers • Ability to measure angles • Understanding of basic algebra and geometry • Ability to deal with problems involving several concrete variables in standardized situations, and problems arising from managing a group of individuals • Ability to work with minimal supervision and direction • Demonstrated knowledge and proficiency in interpreting Material Safety Data Sheets (MSDS) • Understanding of processes in SPS manual • Ability to add, subtract, multiply and divide units of measure using whole numbers, fractions, decimals and percentages Additional Preferred Qualifications/Skills: • Must have sensitivity to safety regulations and requirements • Ability to work within the time constraints dictated by Safran's agreement to customer requests • Ability to self-inspect personal work and correct discrepancies in a timely manner • Ability to follow-up and complete work on inspection non-conformities in a timely manner This job posting has been designed to indicate the general nature and level of work performed by an employee within this position. The actual duties, responsibilities and qualifications may vary based on assignment or group. Working Conditions: 1. Does require fluent communication in English language. 2. Employment Status may be part-time, full-time, or temporary. 3. Traveling may be required. 4. Protracted or irregular hours may be required. 5. Relocation to another Safran facility may be required. Safran Cabin is #1 worldwide for aircraft interiors. Here, you will build your skills and grow with a community of experts to enrich yourself every day. Here, collaboration is embodied within the diversity of our teams all around the world. Here, we're cutting our emissions, not your ambitions. Together, let's shape the sustainable future of aeronautics. Learn more about Safran Cabin! Why join us? US EEO statements: At Safran Cabin, we provide equal employment opportunity to all individuals regardless of race, color, religion, sex/gender, sexual orientation, gender identity/gender expression, marital status, pregnancy, age, national origin, ancestry, disability/medical condition, military or veteran status, citizenship status, genetic characteristics or information, or any other characteristic protected by applicable federal, state, and local laws. Cabin TA: • Your Benefits: Our suite of comprehensive benefits include health care (medical, dental and vision), life insurance, 401(k) savings plans with company match, paid time off, and employee discounts & rewards for consumer products/services and more! • Management roles may be eligible for a 10% target Cabin Management Bonus in accordance with the terms of the applicable incentive plan. The expected salary range for this position is between $98,320 - $154,500 USD. Actual compensation will be determined based on experience, education, and other factors permitted by law. Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience. 7330 Lincoln Way CA 92841 Garden Grove California United States

Monro, Inc. is one of the nation's largest auto service companies and major tire retailer. We own and operate more than 1,200 stores in 32 states and our stock trades on the Nasdaq (MNRO). The Monro family of brands includes some the most recognizable names in the industryMonro Auto Service and Tire Centers, Mr. Tire, Tire Choice, amongst many more regional chains. Our dominance is driven by teammates who strive to provide a five-star experience and deliver consistent value to our guests and shareholders. At Monro, we understand that a 5-star guest experience begins with a 5-star teammate experience. In fact, we're currently investing more than $100 million in store improvements, new technology, and career development through our own Monro University training platform. Destination Monro Your Career is Here! Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America's leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We're looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships; if you value honesty and integrity - we have a Destination for you at Monro. Contact us to learn more. Destination Monro! Your career is here. ASSISTANT AUTOMOTIVE STORE MANAGER Pay: $20 - $23 per hour. Pay is based on experience. This role is eligible for additional compensation and incentives As a Monro Assistant Automotive Store Manager, you will be involved in all aspects of everyday store operations including the efficient, productive, and safe operation of our service bays. The Assistant Automotive Manager position is a great way to start your career at Monro. Starting day 1 you will begin a comprehensive Management training program, covering all aspects of your new role, while preparing you for the next. As an automotive Manager for Monro, you will be an essential team member, responsible for building lasting relationships with our Guests. More importantly, you will be part of a team, working together to deliver 5 Star Guest experiences, while using your professional skills to take care of people, their cars and ensure our guests have safe, reliable transportation. Responsibilities • Collaborate with Store Manager on operations of the store and decisions of hiring, training, coaching, disciplining, and terminating employees, • Support automotive technicians in establishing and maintaining productive sales environment by training and developing teammates on all shop operations and guest services, • Assist with scheduling employees, completing timecards, and assigning work to Lube and Tire technicians, • Performs duties of automotive technician when needed, • Attends meetings and clinics to maintain current knowledge of tools, parts, and repairs Minimum Qualifications • High school or GED equivalent., • 2+ years of automotive and sales experience, • Valid Driver License, • Ability to work with hands overhead, stand for long periods and lift 50 lbs., • Excellent communication skills and basic algebra to calculate figures and amounts such as discounts, interest, commissions proportions, and percentages., • Guest and team focused mindset Preferred Qualifications • Automotive State Inspector License, • ASE Automotive Certifications, • Proven Automotive or Automotive Quick Lube sales experience, • Leadership experience Benefits • Performance based incentives, • Paid vacation and holidays for Full-Time Teammates, • Reimbursement for ASE Certifications, • Reimbursement for State Inspection Licenses, where applicable, • 401k eligibility immediately upon hire, • Direct Deposit, • Employee Discounts, • Healthcare, Vision, and Dental for Full time teammates, • Employee Access Perks, • Career Advancement Opportunities Your next Destination! Growth Opportunity: At Monro we're committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Fullerton, California, United States The Receiving Inspector will play a key role in verifying incoming parts and components meet quality, engineering, and customer specifications before entering production. SHIFT: 7am - 4:30pm Perform visual and dimensional inspections on incoming parts, hose assemblies, and machined components Ensure conformance to engineering drawings and specifications Use tools including micrometers, calipers, height gages, and comparators Complete First Article Inspection (FAI) reports and maintain accurate inspection records Communicate findings with internal teams and suppliers Support occasional in-process inspections and internal audits Follow company safety policies, quality procedures, and 5S standards Requirements: Minimum 1 year of inspection experience in a manufacturing environment Strong blueprint reading and basic GD&T understanding Proficient in the use of manual inspection tools Comfortable documenting inspection results and communicating with teams High school diploma or equivalent Must be a U.S. Person (Citizen or Permanent Resident) per ITAR regulations Vision: 20/25 or better (corrective lenses acceptable); cannot be colorblind Compensation & Benefits: $27 - $28/hr starting rate Year-end performance review eligibility Opportunity to join a well-established quality team with room to grow Medical, Dental, Vision, 401k About Elevant Recruiting: At Elevant, we specialize in connecting manufacturing and industrial employers with the skilled talent that keeps operations running strong. Were proud to be veteran-owned and focused on delivering real results without the overhead. If you're looking for a stable opportunity in a quality-driven environment we want to hear from you. Learn more about us at elevantrecruiting.com

The Quality Control Inspector plays a critical role in maintaining product quality, identifying deficiencies, documenting findings, and verifying corrective actions to ensure every home leaves the facility defect-free, code-compliant, and ready for delivery. POSITION SUMMARY Impact Housing is seekin

Home inspectors conduct inspections on residential properties to check for compliance and assess if there are hazards or structural defects. This entails examining both the interior and exterior of the property, including infrastructure, electrical and plumbing systems, and water quality. In response to issues discovered during inspections, home inspectors communicate with realtors, homeowners, or potential buyers to coordinate repairs and improvements, which may include carpentry, plumbing fixes, and system reinstallation. Its the job of home inspectors to create detailed reports about their inspection findings and present these to homeowners. Aside from descriptions of defects and recommendations for repair and maintenance, these also contain extensive photos, diagrams of property structures, and notes from site observation. Home inspectors work closely with clients throughout every step of the process, approaching inspections based on client requirements and regularly updating them about progress and issues encountered. They strive to be as transparent as possible by relaying all inspection information to clients. Lead generation is a major function of home inspectors, who proactively contribute to sales and marketing efforts. Beyond maintaining good working relationships with existing clients, they may develop marketing campaigns, make cold calls, and attend community and networking events to expand their client base.

The Final Inspector is responsible for inspection of product after completion of all processes. Perform all types of visual inspection related to printed circuit boards using magnification equipment. Perform basic rework operations such as solder-mask touch-up, remove burrs/rough spots, rework damag

In addition to leading the design of the Sixth Street Viaduct, the K-Line Light Rail corridor, and the I-405 Sepulveda Pass Widening, we are the program and construction manager for the LACMTA I-105 ExpressLanes, the SBCTA I-10 Express Lanes, the OCTA I-405 Express Lanes, and the CHSRA Construction

We're growing at a rapid pace and are looking for committed and hard-working individuals that are dedicated to providing our exceptional pest control services. Follow-up on all pending termite and pest control sales in a timely manner. The bugman, an award-winning pest and termite control company is

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity The Assembly Inspector is responsible for performing first article, in-process and final inspections of PCB assemblies. The Assembly Inspector also preps and documents information related to Assembly processes. What You'll Do • Reviews and analyzes customer drawing(s), SOPs, work instructions and requirements specified in the traveler packet to ensure compliance with specifications; performs visual inspections of printed circuit boards and cable assemblies under IPC J standards and/or customer specifications using magnification equipment and completes an inspection checklist; scans job into PROCIM, • Verifies calibration date for any measurement device used for inspection, • Verifies assembly traveler quantity count and notifies team lead of any issues, • Performs a first article inspection (FAI) on all first time build assemblies to verify compliance with applicable IPC/Military and customer specifications; generates AS9102 report, • Identifies and documents product defects; generates NCR form and notifies team lead, • Generates and completes a Certificate of Compliance (C of C), • Performs all other job duties as needed What You'll Bring • Ability to communicate clearly and effectively in English, • Ability to interpret customer drawings, requirements, SOPs, work instructions and manufacturing travelers, • Knowledge of Military, IPC J standards, • Knowledge of first article documentation and shipping standards, • Proficiency with standard Assembly equipment, • 20/20 correctable near vision in one eye, • High attention to details, • Problem solving skills Education and Experience: • High School Diploma or General Education Degree (GED) (Preferred), • Minimum of 2 years of Assembly inspection experience in PCB or electronics manufacturing and assembly industry (Required), • Certified or previously certified J-STD, NASA-STD, and/or IPC-610 (Required) Available Schedules • Monday through Friday, • 1st shift: 7:30am to 4:00pm, • Overtime and Saturdays as Required Job Type • Full Time / Permanent, • On SiteCalifornia Pay Range$18—$22 USD The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job Description Emerald Technologies has an exciting opportunity for two technically proficient SMT In-Process AOI Inspector – Level I to join its Brea, CA team! The AOI Inspector – Level I will perform visual, electrical, and dimensional inspections of printed circuit board assemblies and will be responsible for daily inspections to assure compliance with manufacturing traveler, engineering drawings, bill of materials, process specific instructions, critical criteria, IPC standards (IPC-610, J-STD-001, Class 2), and other applicable documents. At Emerald Technologies each employee has a significant role in building innovative products for various industries. Come and work in a supportive, fun team atmosphere where the work is meaningful, and careers have no limits! Responsibilities of the AOI Inspector – Level 1: • Responsible for setup and operation of 2D AOI (Automated Optical Inspection) machines., • Perform visual and dimensional inspections of printed circuit board assemblies to ensure workmanship that complies with the appropriate requirements from engineering drawings, process specifications, industry standards (IPC-610, J-STD-001), and customer-specific criteria., • Uses precision measuring instruments such as smart tweezers and calipers and pin gauges to determine adherence to electrical and dimensional specifications on first articles, in-process inspections, and production runs., • Ability to operate equipment in a fast-paced electro-mechanical production environment., • Communicate the defects not captured by equipment to responsible personnel for enhancement of program integrity., • Communicate to assembly operators any of the defects being noted during the AOI operations so that corrections can be quickly implemented., • Perform and record results of first article inspections and in-process inspections of assemblies and input data into the associated database. Benefits of the Job: • Competitive medical, dental, and vision benefits, • Health Savings Account/Flexible Spending Account, • 401K and company matching with no vesting period, • PTO for rest and relaxation, • Gym reimbursement (through Anthem), • Employee Assistance Program, • A safe and inclusive work environment with team and management support, • Employee training and development, • Community service and philanthropic initiatives, • Employee appreciation and events, • Career advancement opportunities, • Employee Referral program, • Employee discounts Qualifications of the AOI Inspector – Level 1: • High School Diploma or equivalent., • Minimum 3 to 5 years of experience in electronics assembly manufacturing or similar industry., • Experience operating Automated Optical Inspection (AOI) machine and the ability to interpret Engineering Documentation and work instructions., • 3 years of Electronic Manufacturing., • Comprehension of IPC-610 and J-STD-001 standards., • Must understand how electronic components are oriented and be able to distinguish the different part numbers., • 1 year of experience in a regulated industry such as ISO9001, AS9100 or ISO13485. Emerald Technologies is an electronics manufacturing services (EMS) provider for original equipment manufacturer (OEM) customers, focusing on high-reliability electronic assemblies. With design and manufacturing facilities in California, Michigan, New Hampshire, Oregon as well as in China and Malaysia. Emerald Technologies specializes in high mix, low- to medium-volume manufacturing for high-reliability markets in the Aerospace/Defense, Life Sciences, Renewable Energy, Industrial Controls, Power & Infrastructure, Semiconductor and Telecommunications sectors. However, our rapid turnaround times, responsive customer service, and collaborative problem-solving approach distinguishes us from the competition. At Emerald Technologies, we are committed to fully understanding and meeting the needs of our customers through quality excellence, advanced engineering, and a solid commitment to customer relationships. Emerald Technologies, is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Second Shift (2 Shifts Total) Shift Hours: Monday–Friday, 2:30 PM – 11:00 PM Paid Hours Per Day: 8 hours (includes one 30‑minute unpaid meal break). Overtime: May be required based on production needs and will be compensated in accordance with California labor law. Breaks Meal Break (First Shift): One 30‑minute unpaid meal break, typically scheduled around 10:30 AM – 11:00 AM. Meal Break (Second Shift): One 30‑minute unpaid meal break, typically scheduled between 6:30 PM – 7:00 PM. Rest Breaks: Two paid 10‑minute rest breaks per shift, in compliance with California labor law. Budgeted Hours Budgeted Weekly Hours: 40 hours (5 shifts × 8 hours). Overtime: May be required based on production needs and will be compensated in accordance with California labor law.

Job Description Responsibilities include: • Provide grading observations., • Provide compaction testing on soils, aggregates and asphalt., • Provide special inspections per additional inspection certifications in accordance with approved project documents., • Document project grading activities., • Provide sampling and Quality Control of concrete and/or grout. Requirements Required Competencies: • Ability to work well in a team environment and communicate clearly with coworkers, clients, consultants, contractors and potential clients., • Nuclear gauge usage certification., • ACI Field Technician Grade 1 license., • ICC Soils Inspector License is a plus., • ICC Reinforced Concrete is a plus., • Excellent written and oral communication skills., • Excellent computer skills including but not limited to Microsoft Office Outlook, Word, Excel, etc. Benefits Excellent benefits package including medical, dental and 401K Plan. Salary commensurate with experience.

Job Description About Proponent: Proponent is the world’s largest independent, employee-owned distributor of aircraft parts, serving customers worldwide. With more than 600 employees across 14 global locations, we take pride in helping keep thousands of aircraft flying safely and efficiently every day. For over 50 years, we’ve built the systems, relationships, and expertise that aviation relies on, from responsive quoting and on-time shipments to data-driven improvements that reduce turnaround time and cost. As a 100% employee-owned company, everyone at Proponent is an owner, which means we share responsibility for our success, look out for one another, and bring dedication and creativity to aviation logistics. Guided by our core values, empathy, intelligence, agility and integrity, we work as a trusted partner to keep aircraft in service and customers moving forward. At Proponent, you’ll join a global team committed to doing things right and supporting each other, helping keep aircraft flying and the world connected. Inspector Mechanical The Mechanical Inspector performs inspection activities on a variety of manufactured aviation parts and other precision machined components. S/he is responsible to ensure full compliance to product requirements with the end in mind of providing Manufacturing customers with first-time, quality, on-time delivery. Job Responsibilities: • The Mechanical Inspector reads and interprets materials, such as work orders, inspection manuals, and blueprints, to determine inspection and test procedures., • S/he uses technology and tools to inspect materials, products, and work in progress for conformance to specifications., • S/he tests and measures finished products and assemblies for functioning, operations, accuracy or assembly to verify adherence to functional specifications., • S/he marks items for acceptance or rejection, records test results and inspection data, and compares findings with specifications to ensure conformance to standards., • S/he discards or rejects products, materials, and equipment not meeting specifications., • S/he confers with vendors and others regarding inspection results, recommends corrective procedures, and compiles reports of results, recommendations, and needed repairs., • S/he prepares reports and maintains inspection records in accordance with Quality standards and requirements., • S/he is also responsible to secure and maintain supplier quality information and documentation and other information for use in production verification. From time to time, the Mechanical Inspector may perform other duties or participate in various projects in support of manufacturing operations, as required. Requirements for Success: • High School Diploma, • CMM’s or Articulated portable CMMs and MBD (Model Based Definition) inspection, • 5+ years of related Quality Engineering and Inspection experience in electronics, aerospace, or similar environment with a quality system such as ISO, • Proficient with Verisurf, MBD/DPD, Mastercam X7 CAD/CAM and Shoptech E2 or similar ERP platform, • Proficient with calibration and use of a variety of inspection tools and equipment, • Proficiency with MITUTOYO B-231 Coordinate Measuring Machine, ROMER ARM mobile inspection, WILSON Hardness Machine “Rockwell” Benefits and Perks of joining the team: • Medical, Dental, and Vision plan options, • Employee Stock Ownership Plan, • 401k Plan, • Vacation, Sick, and Holidays, • Good work-life balance, • WFH Hybrid available for most positions

Job Description Ideal Candidate Profile Do you fit this profile? • Wants to start a CAREER / not just another "job", • Wants to make a difference, • High Moral Standards & Values, • Positive, • Helpful, • Team Player, • Professional, • Wants to be the best of the best, • Is Ready Envirocheck is a growing company and has exciting opportunities for “A” players on our team. Job Summary Our environmental field technicians / consultants (Level 1) provide clients with advice regarding potential contaminant presence in a variety of settings including residential, commercial, and industrial buildings. An ideal candidate should be an individual who is self-motivated, this “hands-on” position requires strong analytical and communication skills to identify a potential issue and convey the said issue to a client with remedial solutions when necessary. Through on-the-job training and certification courses, field technicians gain knowledge regarding state and federal regulations and in turn conduct surveys and produce reports as a knowledgeable party. Responsibilities and Duties • Conduct on-site inspections, which includes documentation of site conditions, sampling, and in-person consultation, • Produce professional survey reports based on inspection notes and sample data with remedial recommendations as necessary, • Coordinate with multiple parties regarding inspections while keeping all parties best interests in mind, • Adhere to all applicable state and federal laws and regulations and communicate that information to clients in a professional manner Qualifications and Skills • No experience required - will train., • High school diploma is required., • Prefer individuals with a bachelor's of science degree in construction management, biology, chemistry, environmental science, and/or a related science., • Valid Driver's License, • We are hiring for all levels! Certified asbestos consultants (CAC), certified site surveillance technicians (CSST), Lead sampling technicians, or CA DHS lead inspector/assessors are encouraged to apply. Benefits • Health Insurance options, • 401K with matching, • Company vehicle & iPhone & gas card provided, • Paid Training & Field-Related Education

Join the Clean Energy RevolutionBecome a Underground Civil Quality Control Inspection Specialist at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll be responsible for ensuring compliance with standards, codes, and specifications through inspections, testing, and documentation, while managing corrective actions and supplier quality performance. You will oversee field inspections, monitor contractor crews for safety and quality, and coordinate project changes with internal and external stakeholders. Additionally, you’ll lead preconstruction meetings, provide updates on work scopes, and maintain a safety-conscious work environment. As a Underground Civil Quality Control Inspection Specialist, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?ResponsibilitiesPerform on-site inspections of new residential tract and developer substructure installations. Maintains inspection records, and reviews inspector reports.Helps execute all activities related to inspections in a timely and highly efficient manner without sacrificing customer satisfaction.Measure and recording the location of Edison facilities, accounting for deviations, creating as-built drawings and communicating status of construction and inspection activities as the need arises.Verifies that materials are inspected and maintained in accordance with applicable specifications, codes, standards, and regulatory guides. Verify compliance with Edison standards, applicable construction requirements, industry standards and local governing agency standards.Monitor contractor crews for safe, productive and quality work practices. Interface with internal personnel and outside agencies; making decisions in the field which may impact the work order closings.Manages preconstruction meetings to discuss issues that affect quality with new and existing subcontractors and the superintendent at the start of each new phase of the work.Ensure warranty corrections are completed; inspecting work for safety and quality.Create and maintain a safety conscious work environment by leading and influencing others to follow Edison safety protocols and safe work practices.Review, authorize, validate and track assigned work scopes and scope changes at the field level.Coordinate changes to projects in accordance with work order design and/or department policies and procedures with both internal and external customers.A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.Minimum QualificationsThree years of experience in quality control/inspection.Possess a valid Class C Driver's License.Preferred QualificationsExperience with project management and/or underground civil construction.Experience in customer service and/or customer-facing roles.Experience in reading and/or interpreting distribution or technical drawings.Three or more years of experience performing surveillance and inspections.Experience with Microsoft Office applications, including Outlook, Word, and Excel.Experience with SAP, AutoCad, and Autodesk Review. Additional Information This position’s work mode is on-site. The employee will report to an SCE facility or in the field location. Further details of this work mode will be discussed at the interview stage. The work mode can be changed based on business needs.Visit our Candidate Resource page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Relocation does not apply to this position.About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.Southern California Edison is a proud Equal Opportunity Employer, including disability and protected veteran status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at AskHR@sce.com or (626) 302-3456 and select option 2.Brand: Southern California EdisonJob ID: 6212Job Area: Transmission & DistributionPosted Date: 31/07/2026

Job DescriptionJob Title: Quality InspectorJob Description Join our dynamic team as a Quality Inspector, where you will work on a flexible schedule from Monday to Thursday, 7:00 am to 5:30 pm, with occasional Friday overtime at the end of the month. You will perform diversified inspection work on aerospace and commercial parts, ensuring conformity to established standards using engineering drawings, process specifications, and customer documents. Responsibilities • Perform diversified inspection work on aerospace and commercial parts., • Use engineering drawings, process specifications, and customer documents to verify purchased parts, assemblies, and final deliverable units., • Inspect raw material, mechanical, electrical, or electro-mechanical products for conformity to requirements., • Exercise judgment based on knowledge, performance specifications, and engineering drawings.Essential Skills, • 3-5+ years of experience in a manufacturing environment., • Experience with first article to final inspection in a job shop environment., • Proficiency in reading and understanding complex engineering drawings and GD&T readings., • Detail-oriented and precision-focused with strong attention to detail., • Experience with true positioning, thread, and geometric tolerance.Additional Skills & Qualifications, • Experience in a mass production or machine shop setting., • Self-starter capable of working with minimal supervision., • Proficiency with optical & video comparator, surface plate and height gages, micrometers and calipers., • Familiarity with plug and ring thread gages, pin gages, and basic calibration methods., • Knowledge of AMS & MIL standards is an advantage., • CMM experience is a plus but not required.Why Work Here? This is a direct placement position offering comprehensive benefits after 60 days, including medical, dental, vision, 401K, and PTO. Enjoy 8 holidays per year, 3 sick days, and a rewards program with monthly and quarterly gift cards. Work Environment Work in a team of 5 inspectors in a dynamic machine shop setting. The environment is industrial and can be loud, with a mid-strong smell due to the manufacturing of plastic and metal parts. The role requires both sitting and standing, and steel-toed shoes are mandatory. Job Type & Location This is a Permanent position based out of Orange, CA. Pay and Benefits The pay range for this position is $50000.00 - $63000.00/yr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Open to higher pay DOE Direct placement position Eligible after 60 days for Medical, dental, vision, 401K, 8 holidays per year, 3 sick days per year, 1 week of PTO 1st year and 2 weeks of PTO 2nd year, Rewards program Monthly and Quarterly with gift cards Workplace Type This is a fully onsite position in Orange,CA. Application Deadline This position is anticipated to close on Aug 21, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. \nCompany Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description We are currently looking for an associate in Quality as a Quality Inspector for the city of Westminster, CA! Prior aerospace experience is preferred. Job Duties: • Inspect in process material against the production order and part pri, • Thoroughly inspect part lengths and all critical dimensions, • Learn and understand customer specific requirements, • Ensure required stretching blocks and gauges are used, • Alert supervisor when suspect or out of tolerance material is found, • Monitor dimensional variances during the stretch and quench processes, • Conduct First Article inspections, • Document Control, • Complete any required inspection documentation, • Perform daily duties as required, • Assist production as needed Other Duties: • Ability to analyze information provided on blueprints, • Strong math skills, • Strong computer skills, • Strong problem-solving skills, • Ability to learn to use QMS software, • Able to interpret part drawings and measurement requirements, • Experience using tape measure, calipers, and micrometers, • Good communication skills Minimum Job Requirements: • Education: High School Diploma, • Experience: 1-2 years Quality Inspection experience in a Manufacturing setting, • Specific Skills: AS9100/QMS experience, • Specialized Knowledge, Licenses, etc.:\nCompany Description We specialize in hiring in all areas of warehouse, manufacturing, production, light industrial, clerical, accounting, customer service and any skill trade positions including management. Ensuring that clients get the best match possible for each open position. We specialize in hiring in all areas of warehouse, manufacturing, production, light industrial, clerical, accounting, customer service and any skill trade positions including management. Ensuring that clients get the best match possible for each open position.

Job Description We're hiring a Quality Control Technician! Join our team to inspect products, ensure quality standards are met, document inspection results, and help deliver high-quality products in a fast-paced manufacturing environment. Location: Westminster, CA Job Type: Full-time Schedule: Monday - Friday [4/10 or 5/8 schedule] Salary: $20 - $23/hr Job Duties • Inspect in-process materials to ensure they match the production order., • Learn and understand customer requirements., • Alert supervisor when suspect or out of tolerance material is found., • Conduct First Article Inspections., • Complete required inspection documentation. Requirements • High school diploma or equivalent., • 1–2 years of manufacturing quality inspection experience., • Ability to read blueprints and use measuring tools (calipers, micrometers, tape measure)., • Strong math, computer, and communication skills., • AS9100/QMS experience is a plus. Join us and be part of a team committed to quality and excellence!

Job DescriptionKSR Foam & Technical Products LLC | Garden Grove, CA $20–$25 per hour + Bonuses + Overtime Opportunities Join a Growing Manufacturing Team KSR Foam & Technical Products LLC is seeking a detail-oriented Quality Inspector / QA Inspector to help ensure our products meet customer specifications and industry quality standards. This role is ideal for someone with at least one year of quality inspection experience who is looking to grow their career in manufacturing quality. Experience with engineering drawings, CAD software, or SolidWorks is a plus but not required. What We Offer • Competitive pay: $20–$25 per hour (based on experience), • Shipping bonus eligibility, • Overtime opportunities available, • Stable Monday–Friday schedule, • Opportunities for skill development and career growth, • Small-team environment where your work has a direct impact, • Growing company with long-term opportunitiesSchedule First Shift: Monday–Friday, 6:00 AM – 2:30 PM • Saturdays and overtime as neededKey Responsibilities, • Inspect in-process and finished products using rulers, tape measures, and other measuring tools, • Verify product dimensions and quality requirements, • Identify, document, and report non-conforming materials or parts, • Maintain inspection records and quality documentation, • Ensure measuring equipment is properly maintained and calibrated, • Follow ISO 9001:2015 and AS9100D quality management standards, • Oversee packing and shipping processes to ensure products are packaged correctly, labeled accurately, and shipped according to customer requirements, • Verify outgoing shipments meet quality standards and order specifications, • Coordinate with production to maintain accuracy and on-time deliveries, • Support production operations as needed, • Maintain a safe, clean, and organized work environmentQualifications Required: • Minimum 1 year of quality inspection, quality control, or manufacturing quality experience, • Basic math and computer skills, • Strong attention to detail and accuracy, • Ability to read basic blueprints or drawings, • Ability to follow detailed work instructions and procedures, • Strong communication and teamwork skills, • Ability to work quickly and efficientlyPreferred:, • Familiarity with ISO and AS9100 quality systemsPhysical Requirements, • Ability to stand and walk for extended periods, • Frequent use of hands and fingers for inspection activities, • Ability to lift, push, pull, and carry up to 100 lbs independently, • Ability to work around manufacturing equipment, noise, dust, and moving machineryWhy Join KSR Foam & Technical Products? At KSR Foam and Technical Products, quality matters. You'll play a critical role in ensuring products meet specifications from production through final shipment. Working closely with manufacturing, packing, and shipping teams, you'll help deliver high-quality products to customers while contributing to the continued growth of our company. Apply Today — Immediate Opening Available!

Job Description QUALITY INSPECTOR Location: Placentia, California 92870 Work schedule: 1st shift with LOTS of overtime WORK EXPERIENCE • 3-5+ years of production inspection experience in an aerospace or defense manufacturing environment., • To conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government., • Proficient in spoken and written English., • Must be able to read and interpret drawings and planning documents, • Must have extensive knowledge of inspection tools, surface plate layout techniques, drawing interpretation, caliper, micrometer and CMM skills (optional)., • Must have knowledge of SPC and be able to assist “B” Inspectors in problem solving., • Must be able to use inspection and measuring tools., • Must be able to prepare inspection reports and input data into a computer. ESSENTIAL DUTIES • Performs inspection of parts, sub-assemblies, castings, forgings, final products, and incoming raw stock, to determine conformance to alignment, contour, hardness, functionality, and dimensional specifications., • Performs first article inspection and final approval of machine parts, tooling, castings, and forgings., • Analyzes Engineering drawings, planning documents, and requirements to determine inspection and validation requirements., • Performs mechanical inspections and validations using precise tooling (CMMs, surface plates, calipers, micrometers, height gages, etc.)., • Records inspection results on appropriate forms, inputs digital data in a format which leads to decisions on final disposition of discrepant parts., • Maintains control of scrap parts., • Supports the calibration of inspection tools. WORKING CONDITIONS/PHYSICAL REQUIREMENTS • While performing the duties of this job, the employee is regularly required to verbally give directions to staff and understand responses., • The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms (keyboarding/data entry, dial phone, sort/gather, file, scan, copy documents)., • This position may alternate between a sedentary as well as mobile role at times in order to follow up with various departments in the company., • This position would require the ability to lift files, open filing cabinets and bend or stand., • Intermittent travel may be required by road and/or air to various clients/ vendors and/or subcontractors., • Occasionally may include heavy lifting and moving of equipment 30+ pounds: overhead lifting, bending, prolong standing, twisting.\nCompany Description We're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer. We're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.

Job Description Career Opportunity – Aerospace Quality Control Mechanical Inspector - Acromil LLC – City of Industry Our Company Using state-of-the-art technology, Acromil, LLC in City of Industry, CA has been a primary supplier to the Commercial and Defense Aerospace Industries of complex structural components and assemblies since 1959. Acromil pursues its vision of excellence by providing the highest quality products, on time and at competitive prices within a culture of integrity and pride. This vision led us to the acquisition of a similar business operation located in Corona, CA in September 2018 for a total footprint of 200,000 square feet. Acromil’s increased capacity will further our goal of being a World Class Supplier. Our Opportunity The selected individual will be responsible for inspecting customer products to ensure products are manufactured within conformance of customer specifications; inspection includes, but is not limited to checking dimensions, tolerances, functionality, configuration, aesthetics, surface finish, or plating, and material per customer specifications and/or blueprints. Responsibility includes inspection of, raw material, first articles, in process, source inspection, purchased, or modified products and complex assemblies. Sort and stack usable parts for shipping, document and contain defective parts for rework, customer submittal and necessary dispositioning. Essential Duties • Perform complex mechanical dimensional and visual inspection of products or complex assemblies including first article, in-process and final inspections per blueprints and/or other written specifications using designated and appropriate measuring devices, such as micrometers, calipers, digital (dial) indicators, optical comparator, ring, pin or thread gages., • Verify controls for precision tools and inspection equipment to regulate proper inspection of product and ensure calibration requirements are accurate and current., • Document part numbers, lot numbers, serial numbers, quantities, inspection dates, results on manufacturing plans, AS9102 forms and all other associated documentation to ensure accurate product quality history records for each inspection task performed., • Inspect product within the estimated time requirements., • Assist Quality Control Management during investigations and/or deviations review., • Support the requirements of the AS9100 Quality Management Systems., • Report and communicate all non-conforming product(s) in accordance with established procedures., • Monitor work order to ensure inspection and manufacturing operations are completed as required., • Responsible for communicating and informing manufacturing and other related departments of any out of tolerance condition or acceptability of product based on specification., • Perform general quality inspection tasks and other work-related duties as required or assigned by Quality Control Management., • Strong communication skills are required to ensure suppliers understand requirements and expectations; make trip reports and present findings. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Experience with ANSI Y14.5 Geometric Tolerance., • Understanding of aerospace drawings, specifications, processing, and quality requirements., • Basic understanding of calibration requirements., • Basic understanding of statistical process control., • Experience with Excel, Word, and Outlook., • Familiar with CMM operations (ability to run programs), • Experience of AS9102 forms and related requirements. Person must be a United States (US) Person as defined by ITAR Regulations – A United States (US) Person is a citizen of the United States, a lawful permanent resident alien of the US, (a "Green Card" holder), a refugee or someone in the USA as a protected political asylee or under amnesty. Education/Experience High School diploma or GED; some college or technical training preferred. A minimum of three (3) years quality assurance mechanical inspection experience required, or a combination of education and/or experience. Must have experience using calipers, micrometers, height gauge, comparator, and knowledge of GD&T and blueprints. Knowledge of CMM, Romer and or Laser Tracker, Bill of Materials and MRP systems desired. Other Skills and Abilities Language Skills Ability to read, interpret and adhere to written documents such as quality manual, inspection procedures, operating and maintenance instructions, blueprints, schematics and work instructions; the ability to write routine reports and correspondence and document inspections accurately. Must listen well to verbal instructions and seek clarification when necessary and respond concisely to inquiries from management or co-workers. Math Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Requires ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Needs ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to investigate all steps and processes pertaining to product issues by analyzing applicable engineering design, specification and conformance requirements. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel and talk or hear. The employee is frequently required to sit; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. The employee is frequently exposed to vibration. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits We offer Medical, Dental, Vision, Life Insurance and a 401(k) plan with Employer’s match, safety incentives and an employee referral bonus program. We also provide paid holidays, vacation and sick days. We are proud to be an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation.

Job Description This position reports to the Quality Manager and will perform receiving, in-process, and final inspection in accordance with established work orders and Quality Management System requirements. Has the responsibility and authority to carry out assigned tasks. This position reports to the Quality Manager and will perform receiving, in-process, and final inspection in accordance with established work orders and Quality Management System requirements. Has the responsibility and authority to carry out assigned tasks. Essential Functions: • Ensure that processed hardware meets or exceeds all applicable requirements., • Inspect products to blueprint, engineering drawings, and work orders., • Verify supplier certifications meets TVT purchase order requirements., • Perform verification of product identification., • Carry out surface plate inspection and layout setups., • Perform a complete visual inspection of received in-process and end items., • Accept items that meet the requirements and reject those that do not conform., • Initiate non-conformance reports on hardware that does not meet requirements., • Maintain records and documentation of inspection as required., • Able to read and understand furnace digital charts., • Perform hardness testing inspection., • Maintain a clean and organized work area., • Perform micro-hardness testing inspection., • Perform seepage testing and helium leak testing., • Always maintain confidentiality. Knowledge, Skills, and Abilities: • Read and interpret blueprints and engineering drawings., • Ability to use inspection hand tools including but not limited to micrometers, calipers, height gages, surface roughness finish, surface plate, profilometer, and video borescope., • Speak, read and write English., • Effectively communicate with all departments., • Intermediate computer skills including Microsoft Excel and Outlook. Working Conditions: This position takes place in a normal inspection/ office environment and may communicate with the shop floor as deemed necessary. Minimum Qualifications: • High school diploma or equivalent., • Ability to lift 30 lbs. The following vision in at least one eye, either corrected or uncorrected: a minimum of Curpax N5, Jaeger #2, or equivalent at 16 inches or greater, and shall be capable of adequately distinguishing and differentiating colors. Will be tested every 12 months. Desired Qualifications • Two (2) years of experience in the inspection of manufactured hardware., • Experience with blueprints, engineering drawings, and inspection hand tools., • Familiarity with hardness testing inspection. Success Factors: • Team player that works well with others and is able to provide support in other process areas., • Works well independently, under pressure and deadlines., • Able to multitask. Willingness to participate in efforts and innovation to reduce non-value-added tasks. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Job Type: Full-time EEOC Thermal Vac Technology, is an Equal Opportunity Employer. Employment with Thermal Vac Technology is not influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. ITAR REQUIREMENTS To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. \nCompany Description Thermal Vac Technologies, based in Orange, California, has been a trusted provider to the aerospace and defense industries for over 50 years. Recognized as a premier thermal processing and precision brazing facility, we specialize in delivering high-quality, complex components that meet the most demanding industry standards. We are ISO 9001 and AS9100 Registered, as well as Nadcap Certified, ensuring our commitment to excellence, consistency, and compliance across all operations. At Thermal Vac Technologies, we foster a workplace culture built on integrity, innovation, and teamwork. Our employees benefit from: Challenging and meaningful projects A clean, safety-focused work environment Competitive pay and excellent benefits Opportunities for training and career advancement Join a company where your work contributes directly to the success of mission-critical aerospace and defense programs. Thermal Vac Technologies, based in Orange, California, has been a trusted provider to the aerospace and defense industries for over 50 years. Recognized as a premier thermal processing and precision brazing facility, we specialize in delivering high-quality, complex components that meet the most demanding industry standards.\r\n\r\nWe are ISO 9001 and AS9100 Registered, as well as Nadcap Certified, ensuring our commitment to excellence, consistency, and compliance across all operations.\r\n\r\nAt Thermal Vac Technologies, we foster a workplace culture built on integrity, innovation, and teamwork. Our employees benefit from:\r\n\r\nChallenging and meaningful projects\r\n\r\nA clean, safety-focused work environment\r\n\r\nCompetitive pay and excellent benefits\r\n\r\nOpportunities for training and career advancement\r\n\r\nJoin a company where your work contributes directly to the success of mission-critical aerospace and defense programs.

Job Description The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. IPC-600 and JSTD-001 Space Experience Required. Job Functions: • Experienced quality individual in dimensional and visual inspection of aerospace machined components, • Experience in performing FAI’s – AS9102 (The SI will verify supplier’s FAI, not perform them), • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Other duties as assigned KNOWLEDGE, SKILLS AND ABILITIES • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • MS Outlook, and EXCEL experience, • Mechanical inspection experince preferred, • IPC, J-STD, and Mil-Spec inspection experience preferred. Such as IPC-610 or IPC 620 Skills: • Strong verbal, written and communication skills, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Knowledge of basic computer skills, include basic Excel skills - must pass Excel test Ability to: • Work as an effective team member, • Establish and maintain effective working relationships, • Fluent English – reading and writing is required, • Pass pre-hire background check including DMV and credit screening, • Pass Pre-hire Drug Screening Supervision Received:, • The work is performed under general supervision, • U.S. Citizenship required Preferred Education and Skills (including certifications): • 3+ years’ experience as a quality inspector, technician, or engineer., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Outlook and Excel, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered, • Prior practical experience and implementation of Quality inspection tools and equipment. Experience in RCCA, and problem-solving a plus BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • Requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employment Pay Range: $25 - $40 hourly Please note that the salary information is a general guideline only. Trigo considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. \nCompany Description TRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Thank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications. TRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans. NOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES, TRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain.\r\n\r\nThank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications.\r\n\r\nTRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans.\r\n\r\nNOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,

Job DescriptionBenefits: • Bonus based on performance, • Company parties, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off, • Vision insurance 6:00 AM – 2:30 PM PST Qualifications • High school diploma or GED, • 5 years’ experience in a Quality Inspection, • 5 yrs experience manual inspections using micrometres, calipers, height gauges, and optical comparators., • Interpret Blueprints, GD&T experience per ASME/ANSI standards., • Experience with machined components in all phases of inspection, including receiving, first article, and final inspection., • 1 year of hands-on experience operating CMM equipment., • Proven experience with manual inspection techniques and tools., • Basic proficiency with Microsoft Office Suite (Word, Excel), • Experience with receiving inspection requirements including FA inspection is a plus.Responsibilities, • Perform dimensional and visual inspections of machined components, assemblies, and finished products, • Experience with CMM Machines. Calypso Software, • Working experience with high-precision measurements and first-article inspections (FAI)., • Manual inspections using micrometres, calipers, height gauges, and optical comparators., • Interpret engineering drawings, GD&T experience per ASME/ANSI standards., • Non-conformance reports (NCRs) and Inspection Report experience

Job DescriptionDescription: Signia Aerospace is a global, integrated provider of high-performance systems and specialized components for the aerospace industry. Signia currently operates two complementary business segments: Thermal Management (key brands include ACE Thermal Systems and Mezzo Technologies) and Mission Systems (key brands include Onboard Systems, Lifesaving Systems, and Meeker Aviation). The Signia brands are leaders in their respective markets and provide a compelling value proposition to both aerospace and defense OEMs and end-users. Onboard Systems Hoist & Winch, located in Anaheim, CA is one of the world’s leading providers of Search & Rescue (SAR) and Human External Cargo (HEC) advanced mission equipment for civil, commercial, and military helicopters. Position Overview Location: Anaheim, CA (Onsite) Schedule: Monday - Friday Pay: $25.00 per hour This is a union position covered under a collective bargaining agreement. Starting pay is $25.00 per hour, per the union contract. The ability to pass a pre-employment background check and an FAA-regulated drug test is required. The Quality Inspector will be responsible for performing inspections, measurements, and tests on products throughout the production process. This role will also support quality engineering and management initiatives by collecting data, implementing corrective actions, and maintaining compliance. What You’ll Do • Perform inspections, measurements and tests of products during the receiving, in-process and final inspections in accordance with documented procedures and work instructions. Collect and record inspection and test results. Complete all required forms and documentation completely and accurately., • Support Quality Engineering and Quality Management by helping to assure compliance with the AS9100, ISO 9001, IPC 610 and IPC 620 and applicable FAA standards and regulations (Part 24 and Part 145, 8130-2’s), • Collect data used to generate key quality metrics that drive efforts to assure continual improvement of Onboard Systems processes and products, • Support the implementation and maintenance of effective corrective actions, as directed, to prevent failure recurrence of Onboard Systems products, • Interface directly with other departments in support of required audits, presentations, certifications, evaluations, inspections and tests. Who You Are • IPC 610 Experience/Certified Required, • This position requires the ability to communicate in English, both verbally and in writing, to complete inspection reports and understand safety and quality standards., • Inspection experience of complex electro-mechanical parts, • Ability to read and comprehend complex documents to include, but not limited to, drawings, procedures, work instructions, forms and schematics, • Strong attention to detail, analytical skills, and problem-solving capabilities What’s In It for You • This position is part of union, offering negotiated benefits and protections. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status Requirements:

Job DescriptionJoin a Growing Orange County Manufacturing CompanyA rapidly growing Orange County company serving the Medical, Military, and Aerospace industries is seeking motivated individuals to train as Quality Inspectors.This is an excellent opportunity for dependable candidates who are eager to learn a valuable skill and build a long-term career in a high-tech manufacturing environment. No prior inspection experience is required we provide training for the right individuals.ResponsibilitiesLearn and perform quality inspections on manufactured components and assembliesRead and interpret engineering drawings, specifications, and work instructionsUse precision measuring instruments and inspection equipmentDocument inspection results and maintain quality recordsEnsure products meet customer and industry quality standardsWork closely with production and engineering teams to maintain quality excellenceQualificationsStrong attention to detailGood communication and organizational skillsAbility to follow written procedures and instructionsBasic computer skillsManufacturing or inspection experience is a plus, but not requiredHigh school diploma or equivalent preferredWhat We OfferPaid holidaysMedical benefits after probationary periodPaid vacationEmployee bonus planCareer growth and advancement opportunitiesIf you are motivated, and ready to learn a rewarding profession, we encourage you to apply today.

Job Description Under general supervision and reporting Quality Management in Quality Operations, The Quality Inspector is responsible for performing visual inspection operations including In-process, Final Inspection, and FAI’s as appropriate. The Quality Inspector must be familiar with hand tools and inspection under magnification. The Quality Inspector will also assist in verification of test data and all other applicable data concerning components, and associated documentation and other duties identified by cognizant management. IPC-600 and JSTD-001 Space Required Job Responsibilities: • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation, • Process warehouse materials, • Rely on instructions and pre-established guidelines/procedures to perform the functions of the job, • Support positive corrective actions and identification of root cause, • Other duties as assigned. Required Skills • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • MS Outlook, and EXCEL experience, • Experience with hand measurement gages, conduct conventional inspection to engineering requirements, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Valid drivers license and auto insurance required. Additional Desired Skills: • Prior practical experience and implementation of Quality inspection tools and equipment., • Experience in RCCA, and problem solving General Requirements • Ability to handle complex situations and solve complex problems, • Ability to work effectively under pressure to meet deadlines, • Ability to press and analyze technical and business information, • Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers, • Ability to remain seated for up to 5 hours at a time, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Must be able to simultaneously manage several objectives, • Must be detail oriented, organized, and self-motivated Additional Qualifications (Preferred): • 3+ years’ experience as a quality inspector or technician., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Office products, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be consideredVision Exam Requirements: The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply., • 4.15.2 Visual Acuity Operators and inspectors involved with electronics manufacturing are to be tested annually by a medical professional and must meet one of the following near vision standards., • Tumbling E in accordance with ISO 18490, • 20/25 (Snellen) at 16 inches (40.64cm), +/- 1 inch (2.54cm)*, • Jaeger No 1 at not less than 12 inches (30.48cm)*, • With at least one eye, either natural or correctedColor vision requirements: Operators and inspectors must be able to distinguish and differentiate between red, green, blue, and yellow at a minimum as prescribed in Dvorine Charts, Ishihara Plates, or AO – HRR Tests., • Valid Driver’s License, • Valid Auto Insurance WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • Requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employmentPay Range $25.00 -$40.00 per hour, please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . Powered by JazzHR S1Y3HYt3YZ