Trabajos general production en Rochester, New YorkCrear alertas

Job DescriptionDescription: General Job Summary: In addition to performing all phases of the TIG weld function, sets-up machinery, tools and parts for job completion. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Understands and follows all applicable safety policies and procedures., • Refers to production Manufacturing Process Control Document (MPCD) for job specifics., • Sets up and runs jobs as required., • Resolves problems with job as required., • Assists in the resolution of production, quality, and engineering issues., • Ensures machines are maintained per safety and quality standards., • Assists with other duties as assigned by supervisor/ manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); One year certificate from college or technical school preferred or equivalent combination of education and experience. Experience 2-3 years related experience or training Computer Skills: None Other Requirements: Understanding and ability to use quality inspection equipment (calipers, height stand, protractor). Strong problem-solving skills. MIG/TIG Welding certification preferred. Ability to wear a respirator, as required. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs.. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud.

Job DescriptionDescription: General Job Summary: In addition to performing all phases of the TIG weld function, sets-up machinery, tools and parts for job completion. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Understands and follows all applicable safety policies and procedures., • Refers to production Manufacturing Process Control Document (MPCD) for job specifics., • Sets up and runs jobs as required., • Resolves problems with job as required., • Assists in the resolution of production, quality, and engineering issues., • Ensures machines are maintained per safety and quality standards., • Assists with other duties as assigned by supervisor/ manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); One year certificate from college or technical school preferred or equivalent combination of education and experience. Experience 2-3 years related experience or training Computer Skills: None Other Requirements: Understanding and ability to use quality inspection equipment (calipers, height stand, protractor). Strong problem-solving skills. MIG/TIG Welding certification preferred. Ability to wear a respirator, as required. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs.. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description Under the direction of the Welding Group Leader or Supervisor, the Welder works from customer drawings and a traveler to fabricate and weld components to produce the highest quality products at the lowest cost, while meeting departmental performance standards, customer specifications and delivery requirements, in accordance with company policies and procedures. A Class A Welder is capable of performing all aspects of welding. Can weld any type of project while consistently meeting or exceeding cycle times. Have the ability to fabricate from prints without the aid of fixtures. Able to do prototypes while also working with engineering to develop fixtures. Capable of being certified. Requires little to no supervisor and has the ability to interpret blueprints and understands weld symbols at an advanced level. Minimum Qualifications: • Job knowledge through suitable education or prior work experience, • Have the ability to regularly lift and/or move 25-50 pounds, • Meet minimum 20/20 vision standards (with corrective lenses if needed), • Score a minimum score on the in-house welding test, • Knowledge on how to set-up weld machine and lay a quality bead for both Mig and Tig, • Ability to read and understand blueprints and weld symbols at an advanced level, • Knowledge of the metric system preferred, • Accurately measure and lay out locations for welded components, • Adjust weld as needed to accommodate varying thicknesses of steel, • Operate grinder, drill, band saw, torch, • Complete and maintain all required paperwork, records, documentation, etc., • Follow and comply with all safety and work rules and regulations. Maintain departmental housekeeping standards Specific Duties: • Using MIG and/or TIG, weld components together according to blueprints and Traveler, • While performing the duties of this job, the employee is regularly required to stand, use hands, stoop, kneel, or crouch., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus., • Must work at a reasonable pace (measured by production efficiency) and within our quality standards to insure timely completion, • Check and verify part numbers prior to assembly of product to customer specifications, • Notify supervisor of part shortages before the part runs out Protective clothing/equipment requirement: • Must supply his/her own welding helmet and safety shoes, • Requires the use of safety glasses and shoes, welding helmet, grinding shield, tight-fitting clothing without tears, hearing protection and gloves This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Slits printed rolls from the press or Extruder to individual rolls as per customer specifications. Material being slit is inspected for quality/defects and finished rolls are palletized for shipment to the customer. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed., • Reads job specifications to determine machine adjustments and material requirements., • Sets up machine., • Uses lowboy to mount full rolls onto machine., • Observes machine operation to detect material defects or machine malfunction., • Measures material dimensions to determine accuracy of machine operation., • Performs minor machine maintenance such as oiling/greasing machines and changing female knives., • Prepares required paperwork, including daily production reports, SPC charting, roll tickets and inventory tags., • Completes work orders when necessary., • Actively participates in safety programs and makes safety observations. Follows plant safety rules., • Other duties as assigned.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms and talk or hear. The employee is occasionally required to walk and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to humid conditions, airborne particles, and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: An Extrusion Utility Operator is responsible for safely and effectively contributing to team a of 4-5 individuals supporting the operation of extrusion lamination manufacturing equipment. Maintaining a strong work ethic while demonstrating good communication skills are important to exceeding customer expectations, productivity standards, and personal career growth. Extrusion Utility Operators are expected to be able to independently prioritize their time and duties to contribute to the team running efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Performs duties in a manner that adheres to safety policies and procedures., • Participate in the training curriculum, learning new aspects of extrusion line operations while completing assigned duties required for operation., • Maintain quality standards by reviewing product specifications and ensuring thorough completion of assigned production paperwork., • Operate as a member of a larger team responsible for aspect of overall process. Team members will rely on attention to detail and proper communication to ensure entirety of process is safe and efficient., • Exercise cautious approach to heavy equipment including use over overhead hoists., • Completes tasks to ensure area around the machine is clean to GMP & Food Safety standards, • Visual acuity for identifying minor imperfections and material defects., • Basic understanding of general tool usage including tape measurers, utility knives and screw drivers., • Good communication skills, both verbal and written with working knowledge of Microsoft Office.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); and one to three years related manufacturing experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions and short correspondences. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to peers and supervisors within the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to read/use a tape measurer and apply concepts of basic algebra. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to reach out for assistance and communicate if instructions or assignments are not clear. Ability to retain information and apply to future situations of similar manner. PHYSICAL DEMANDS The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. Join Us - Sign-On Bonus Included! shift schedule: 12 Hour Nights: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. Shift Differential of $2 per hour for night shift. job purpose: Receive and load milk while maintaining high food quality and food safety standards. Hook up and unload tankers, run quality tests on milk and Clean-In-Place (CIP) tankers. Ensure the work area is kept in a clean and sanitary condition and responsible for performing regular sanitation within the raw milk receiving building. responsibilities: • Follow all safety, working, and Good Manufacturing Practice (GMP) rules. Keep the work center audit ready., • Report to and follow the direction of Processing Supervisors., • Ensures milk is received within specifications and meets all food safety and quality requirements., • Responsible for the inspection, documentation and transfer of products being received from supplier to designated raw material silo., • Receive and load milk, byproducts, and filtration ingredients from tankers while maintaining high food quality and food safety standards., • Testing and documenting milk loads., • Clean process equipment such as silos, lines and tankers, this includes, but isn't limited to, hand cleaning parts, Clean-In-Place (CIP) and Clean-Out-of-Place (COP) operations on a daily basis., • Take accurate samples to monitor Clean-In-Place (CIP) system for chemical concentration., • Take accurate samples of products for QA testing., • Monitor testing equipment. Replace supplies as needed., • Service pumps, valves and heat exchangers to maintain operational state and per routine Preventative Maintenance (PM) schedule., • Report immediately to maintenance and/or supervisor of any damage, irregular activity, or unsafe conditions concerning the fairlife equipment, outside hauler equipment, and/or outside drivers., • Follow escalation protocol based on production and quality triggers., • Aid in the training of new personnel or upskilling of team members., • Effectively follow proper standard operating procedures (SOP)., • Complete every shift Master Sanitation Schedule (MSS), Centerline (CL), and Clean, Inspect, Lubricate (CIL) tasks on a timely manner and accurately., • Communicate with processing on any anticipated schedule delays and/or changes. skills/qualifications required: • Must work in a safe, efficient manner and follow all safety procedures including the use of safety equipment., • Must have the ability to troubleshoot small problems and be able to discern when issues may require input from levels of authority within the corporation., • Must be willing to ask for assistance when the process is unclear., • A high school diploma or General Education Degree (GED) is required, • High School level verbal and written communication skills., • Basic computational skills required. Simple math reasoning required., • Must be able to operate the equipment effectively after the appropriate break-in period., • Must possess or be able to obtain an Industrial Truck Operator License., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting/Standing/Walking/Lifting/Carrying: The operator stands throughout their shift and walks on uneven concrete and tile surfaces. The operator lifts up to 60 pounds on an occasional basis. Two or more employees complete lifts of greater than 100 pounds. Pushing/Pulling/Bending/Stooping: The operator occasionally pushes/pulls a variety of objects which may include empty pallets, and brooms during cleanup activities. The operator will push/pull pipe-fittings during hook up. The operator bends and stoops occasionally throughout the workday, when servicing equipment, picking supplies or waste product off the floor. Squatting/Kneeling/Crawling/Twisting/Turning: The operator may squat when picking up supplies and during cleanup duties, including kneeling on the floor and crawling under equipment. Occasional twisting and turning at the waist while changing dryer lances, or making CIP connections. Climbing/Balancing/Reaching: The operator occasionally climbs approved stairs or ladders. The operator reaches below shoulder level to pick up pipe-fittings from the floor or while servicing product pumps and related equipment. The operator may reach at or above shoulder level when making equipment adjustments, or during cleanup duties. Grasping/Manipulation: Frequent use of the hands and fingers is required of the operator when servicing pumps, using scrub brushes, and connecting pipe-fittings. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Employees will be subject to ambient temperatures as well as elevated temperatures, up to 110 degrees, due to equipment operation and cleaning. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required. how fairlife nourishes you: At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential, • Rewards & recognition, matching gifts, free product, and Business Resource Groups fairlife's nour!sh program is designed to meet you where you are — supporting your individual wellbeing journey while enabling you to do your best work every day. position location: Webster, NY reports to: Processing Supervisor travel requirements: Little to none exempt/nonexempt: nonexempt *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$25.50—$27 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SCHEDULE: 12 hour shifts rotating day/night schedule SUMMARY: Identifies and segregates defective material within individual slit rolls. Combines leftover good material into finished rolls and palletizes for shipment to the customer. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. • Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed., • Mounts slit rolls of product onto shaft of machine using lift cart. Removes rolls as well., • Sets up and makes necessary adjustments to the machine., • Must be able to identify defects and splice good material together per spec., • Reads and understands specs of products being run. Must know packaging materials required for palletizing finished product also. Occasionally uses hand tools to prepare packaging materials., • Completes daily production reports., • Operates stretch wrap machine to wrap finished pallets., • Regularly cleans machine and surrounding area., • Actively participates in safety programs and makes safety observations. Follows plant safety rules., • Other duties as assigned.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED). Dr Winder experience a plus. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common, fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee is occasionally required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to vibration. The noise level in the work environment is usually. moderate American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: 12 Hour Days: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: Operate milk separating equipment in the processing department in a safe and sanitary manner following all GMP's. Operations include receiving/coordination of raw milk, separation, selection of skim milk and cream tanks/silos, running of HTST, monitoring and maintaining process controls of heat exchanger process variables and documenting accurate recordings of process parameters while in operation. Blend and pasteurize for bulk load-out. responsibilities: • Follow all safety, working, and Good Manufacturing Practice (GMP) rules. Keep the work center audit ready., • Report to and follow the direction of Processing Supervisors., • Know proper established start up and shut down procedures., • Maintain and monitor proper process parameters such as pressures, temperatures, flow rates as well as the quality of product being produced., • Know and maintain process specifications., • Properly clean process equipment such as silos, cream storage silos, balance tanks, lines, valves, pumps and heat exchangers., • Clean process equipment such as tanks, lines and separators, which includes, but isn't limited to, hand-cleaning parts, Clean-In-Place (CIP) and Clean-Out-of-Place (COP) operations on a daily basis., • Take accurate samples to monitor Clean-In-Place (CIP) system for chemical concentration., • Take accurate samples of products for QA testing., • Service pumps, valves and heat exchangers to maintain operational state and per routine Preventative Maintenance (PM) schedule., • Responsible for overall system efficiency., • Follow escalation protocol based on production and quality triggers., • Aid in the training of new personnel or upskilling of team members., • Effectively follow proper standard operating procedures (SOP)., • Complete every shift Master Sanitation Schedule (MSS), Centerline (CL), and Clean, Inspect, Lubricate (CIL) tasks on a timely manner and accurately., • Communicate with upstream and downstream processing on any anticipated schedule delays and/or changes skills/qualifications required: • Must work in a safe, efficient manner and follow all safety procedures including the use of safety equipment., • Must have the ability to troubleshoot small problems and be able to discern when issues may require input from levels of authority within the corporation., • Must be willing to ask for assistance when the process is unclear., • A high school diploma or General Education Degree (GED) is required, • High School level verbal and written communication skills., • Basic computational skills required. Simple math reasoning required., • Must be able to operate the equipment effectively after the appropriate break-in period., • Must possess or be able to obtain an Industrial Truck Operator License., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting/Standing/Walking/Lifting/Carrying: The operator stands throughout their shift and walks on uneven concrete and tile surfaces. The operator lifts up to 60 pounds on an occasional basis. Two or more employees complete lifts of greater than 100 pounds. Pushing/Pulling/Bending/Stooping: The operator occasionally pushes/pulls a variety of objects which may include empty pallets, and brooms during cleanup activities. The operator will push/pull pipe-fittings during hook up. The operator bends and stoops occasionally throughout the workday, when servicing equipment, picking supplies or waste product off the floor. Squatting/Kneeling/Crawling/Twisting/Turning: The operator may squat when picking up supplies and during cleanup duties, including kneeling on the floor and crawling under equipment. Occasional twisting and turning at the waist while changing dryer lances, or making CIP connections. Climbing/Balancing/Reaching: The operator occasionally climbs approved stairs or ladders. The operator reaches below shoulder level to pick up pipe-fittings from the floor or while servicing product pumps and related equipment. The operator may reach at or above shoulder level when making equipment adjustments, or during cleanup duties. Grasping/Manipulation: Frequent use of the hands and fingers is required of the operator when servicing pumps, using scrub brushes, and connecting pipe-fittings. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Employees will be subject to ambient temperatures as well as elevated temperatures, up to 110 degrees, due to equipment operation and cleaning. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required. position location: Webster, NY reports to: Processing Supervisor travel requirements: Little to none exempt/nonexempt: nonexempt fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job DescriptionDescription: General Job Summary: Using job production documentation loads and unloads the Robotic welding machines in order to insure safe and productive operation. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Loads and unloads robotic weld machine., • Understands and follows all applicable safety policies and procedures., • Refers to production Manufacturing Process Control Document (MPCD) for job specifics., • Visually inspects finished pieces and record defects., • Perform weld touch-ups (MIG) as required per identified defects., • Changes gas tanks and changes wires., • Resolve problems with job as required., • Assists with other duties as assigned by supervisor/manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED) required. Experience 1-2 years related experience or training or equivalent combination of education and experience. Other Requirements: Ability to use inspection equipment: calipers, height stand, protractor. Ability to wear welding helmet, gloves, and jacket. Basic MIG welding skills. Computer Skills: None required. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to sit; walk, maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist; talk or hear; and lift and/or move equipment/product weighing up to 50 pounds. Utilize lift assist or work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an Associates encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. The work environment may include humid conditions and extreme heat and cold. While performing the duties of this job the noise level in the work environment is usually loud. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SCHEDULE: 12 hour rotating shifts on a 2-2-3 schedule SUMMARY: Extrusion Operator 3 is responsible for safely and effectively contributing to teams of 4-5 individuals supporting the operation of extrusion lamination manufacturing equipment. Maintaining a strong work ethic while demonstrating good communication skills are important to exceeding customer expectations, productivity standards, and personal career growth. An Extrusion Operator 3 is expected to be able to independently prioritize their time and duties to contribute to the team running efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Performs duties in a manner that adheres to safety policies and procedures., • Participate in the training curriculum, learning new aspects of extrusion line operations while completing assigned duties required for operation., • Maintain quality standards by reviewing product specifications and ensuring thorough completion of assigned production paperwork., • Operate as a member of a larger team responsible for aspect of overall process. Team members will rely on attention to detail and proper communication to ensure entirety of process is safe and efficient., • Exercise cautious approach to heavy equipment including use over overhead hoists., • Completes tasks to ensure area around the machine is clean to GMP & Food Safety standards, • Visual acuity for identifying minor imperfections and material defects., • Basic understanding of general tool usage including tape measurers, utility knives and screw drivers., • Good communication skills, both verbal and written with working knowledge of Microsoft Office.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); and one to three years related manufacturing experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions and short correspondences. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to peers and supervisors within the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to read/use a tape measurer and apply concepts of basic algebra. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to reach out for assistance and communicate if instructions or assignments are not clear. Ability to retain information and apply to future situations of similar manner. PHYSICAL DEMANDS The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SCHEDULE: 12 hour rotating shifts, 7am - 7pm and 7pm -7am, on a 2-2-2 schedule SUMMARY: Assist in daily operations of the Finishing Department. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Participates in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation’s efforts to achieve a zero-accident rate., • Retrieves all necessary set up information/specifications/guidelines and follows instructions on the job jacket., • Safely, efficiently and effectively assists with the assigned production machinery equipment monitoring quality, production and waste adhering to all customer specifications., • Ensures immediate work area and work areas for which Machine Operator has responsibility are free of clutter and debris. Perform all cleaning/sanitation responsibilities, safely using all required cleaning solutions and protective equipment., • Monitors all quality requirements as outlined by company procedure and specification. Completes necessary sheets for quality checks., • Actively participates in safety programs and completes required safety observations. Understands and follows plant safety rules., • Attends and participates in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.)., • Able to work all scheduled shifts and required overtime hours., • Trains new employees as necessary., • Other duties as assigned.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) required. Previous manufacturing experience preferred. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee is occasionally required to walk and reach with hands and arms. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job DescriptionDescription: General Job Summary: In addition to performing laser operation, ensures jobs are set-up to meet MPCD/customer requirements. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Understands and follows all applicable safety policies and procedures., • With Manufacturing Supervisor, schedule daily/weekly workload., • Download part program into machine controller., • Ability to perform adjustments of the tube laser to remedy slag, burn through, burrs, and un-desirable conditions., • Utilizes hand instruments (micrometers, calipers, height gage) to perform first piece/blue tag inspections., • Obtains inspection approval for each job., • Works with Engineering to resolve problems and production issues., • Train new Associates on equipment operation, department processes and procedures., • Ability to troubleshoot and resolve basic errors with the operation of the tube laser., • May be required to work/assist Maintenance with issues outside of basic errors/issues., • Ability to successfully load material and record production in Plex. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); One year certificate from college or technical school preferred or equivalent combination of education and experience. Experience 2-3 years related experience or training Computer Skills: None Other Requirements: Ability to use quality measurement devices such as micrometer, verniers, calipers height gauges. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager Schedule: Monday-Friday, 2:00 PM-10:30 PM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 2nd Shift. Includes a 5% shift differential. SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Position Overview: The CNC Machinist I is responsible for operating, monitoring, and optimizing CNC machining processes to produce high-precision components in a production manufacturing environment. This role requires a strong understanding of machining fundamentals, blueprint interpretation, inspection techniques, tooling, and process control to consistently achieve quality and production objectives. Working from established setups, programs, and process documentation, the CNC Machinist I monitors machining performance, performs advanced inspections, troubleshoots production issues, and makes appropriate process adjustments to maintain dimensional accuracy, quality, and throughput. This position serves as a technical resource within the machining department and plays a key role in supporting safe, efficient, and cost-effective manufacturing operations. Key Responsibilities: • Review and interpret engineering drawings, blueprints, specifications, routers, and work instructions to understand part requirements, tolerances, and machining processes., • Operate CNC mills, lathes, and other machining equipment using established programs, setups, and process documentation., • Monitor machining operations and make appropriate adjustments to offsets, tooling, feeds, speeds, and process parameters to maintain dimensional accuracy, quality, and productivity., • Perform advanced in-process and final inspections using micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and other precision measuring equipment., • Verify product conformance to dimensional, geometric, and cosmetic requirements and ensure all quality standards are met., • Troubleshoot machining, tooling, quality, and process-related issues and communicate concerns to technical leads or management as appropriate., • Perform tooling changes, tool life monitoring, and wear compensation to maintain stable machining processes., • Assist with machine setup activities, process validation, and first-piece verification when required., • Maintain accurate production, inspection, maintenance, and ERP documentation., • Support continuous improvement initiatives focused on quality, efficiency, throughput, scrap reduction, and cost savings., • Train, assist, and support less experienced operators as needed while promoting best practices within the department., • Perform and document routine operator-level preventative maintenance activities., • Maintain a clean, organized, and safe work environment., • Be available for occasional overtime to support production requirements. Required Skills & Qualifications: • High School Diploma/GED or vocational equivalent required., • Minimum 3 years of CNC machining experience within a precision manufacturing environment., • Demonstrated experience operating CNC mills and/or lathes, including offset adjustments, tooling changes, process monitoring, and troubleshooting production issues., • Ability to read and interpret engineering drawings, blueprints, specifications, and GD&T requirements., • Strong understanding of machining principles including feeds, speeds, tool wear, cutting tool selection, and process control., • Proficiency with precision inspection equipment including micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and similar metrology tools., • Working knowledge of G-code and M-code programming, including the ability to review and perform minor program edits when required., • Understanding of machine setup principles and machining processes, with the ability to support setup and process validation activities., • Strong mechanical aptitude and problem-solving skills with the ability to identify and resolve machining and quality concerns., • Demonstrated commitment to safety, quality, attention to detail, and continuous improvement. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude; Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Environment & Physical Demands: • This position works primarily in a manufacturing environment supporting CNC machining operations and precision component production., • Requires prolonged periods of standing and walking throughout the workday while operating equipment, performing inspections, and supporting production activities., • Regular use of hands, fingers, and arms to operate machinery, handle tooling, manipulate parts, and perform precision measurements., • Frequent lifting, carrying, pushing, and pulling of raw materials, tooling, fixtures, and finished components. Ability to safely lift up to 50 pounds is required., • Requires frequent bending, reaching, twisting, crouching, and movement around machining equipment and workstations., • Regular use of precision measuring equipment including micrometers, calipers, indicators, height gauges, comparators, and other metrology tools., • Requires visual acuity sufficient to inspect parts, identify defects, verify dimensions, review technical documentation, and safely operate equipment., • Frequent interaction with CNC mills, lathes and other manufacturing equipment containing moving mechanical components., • Regular exposure to machine oils, coolants, metal chips, lubricants, cleaning agents, and other manufacturing-related materials., • Safety glasses with side shields and other required personal protective equipment (PPE) must be worn in designated manufacturing areas., • Noise levels are typically moderate to loud and may require hearing protection in designated areas., • Requires routine use of computers and manufacturing software for reviewing work instructions, documenting production activities, accessing ERP systems, and recording inspection data., • May work across multiple machining cells, equipment platforms, or departments based on production requirements and business needs., • Occasional overtime may be required to support production schedules, customer commitments, and departmental objectives. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday-Friday, 2:00 PM-10:30 PM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 2nd Shift. Includes a 5% shift differential. Compensation details: 22-29 Hourly Wage PI1278f52546f6-25405-41256000

Job DescriptionDescription: If you have a strong work ethic, a "can-do" attitude, and want to play a role in setting the stage for some of the most successful events in our industry, we have a great opportunity for you! We're hiring all positions to support concert tours, festivals, corporate events and other live events in Rochester, NY. We work with some of the biggest production companies in the business and provide labor to venues of all sizes. (There is additional work for candidates who have the flexibility to work throughout NY / NJ.) General Stagehands - Loaders, Pushers Skilled Stagehands - Carpenters, Electricians, Audio, Lighting & Video Technicians Riggers - Experienced Work-at-Heights Professionals, (compensation DOE). Work Schedule:These are on-call, as needed (W-2) positions. Hours will vary; including nights, weekends and holidays and there is no minimum guarantee of hours per week, month, etc. Applicants with previous industry experience and flexible availability are preferred. Rhino Staging was founded in 1991 with a simple philosophy of doing things right and treating people well. This recipe for success has enabled us to become the leading provider of the safest, most proficient, professional stage crews for live events nationwide. We’ve pioneered many positive changes in the entertainment industry over the years and will continue to do so through our commitment to integrity, safety and professional development. Requirements: Physical Requirements: • Ability to push, pull and lift at least 50 lbs. as required for equipment handling., • Ability to consistently walk, stand, bend, stoop & twist as required for on-site tasks., • Comfortable climbing & working at heights as required for Rigging. Other Requirements: • Reliable source of transportation to get to and from event sites in a timely manner, • Must understand general industry terms and fundamental principles, • Must be willing to work varying stagehand level roles., • Must be willing to work indoors or outdoors under varying weather conditions, • Must be willing to work cohesively with teammates and supervisors, • Must wear appropriate attire and footwear for concert / corporate events as outlined in Rhino policies, • Must be able to communicate effectively in English to ensure the safe execution of tasks and coordination with crew and clients*, • Must be 18 yrs of age or older, • High School diploma or equivalent, • Fall Pro, SPRAT / IRATA certifications preferred for Rigging applicants. If you feel you would be a great fit for this position and align with our mission to be the best at what we do, we invite you to submit an application. (Incomplete and out-of-market area applications may not be considered.) The compensation information displayed on each job posting reflects the range for new hire rates for the position across all US locations. Within the range, individual pay is determined by work location and additional factors including job-related skills, experience and relevant education or training. This position is not eligible for stocks and/or stock options. Rhino Admin, LLC is an equal opportunity employer and is committed to providing employment opportunities to all qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or any other characteristic protected by law. If you are unable to use our online application process due to an impairment or disability, please contact hr@rhinostaging.com. *Essential Communication Functions: The role requires the ability to receive, understand, and respond to safety-critical instructions in dynamic, high-risk environments. Crew members must communicate effectively with supervisors and coworkers while working around heavy equipment, elevated structures, rigging, and rapidly changing conditions. Communication may occur through spoken English, written English, ASL, text-based systems, visual cues, or other reasonable accommodations. Certain tasks occur in fast-moving contexts where only immediate verbal comprehension in English is operationally feasible because no alternative communication method can be used without creating delay or increasing safety risk. The employee must be able to perform these essential communication functions, with or without reasonable accommodation, using any effective method applicable to the task. We participate in E-Verify. E-Verify is not used as a tool to pre-screen candidates. For up-to-date information on E-Verify, go to www.uscis.gov and click on the "E-Verify" logo.

Job Description General Dentist Opportunity — Rochester, NY A highly established, multi-specialty dental practice in Rochester, New York is seeking a General Dentist to join a thriving, high-volume team. This is an excellent opportunity for a provider who enjoys bread-and-butter dentistry while still having the flexibility to expand into more complex procedures if desired. Practice Overview This is a well-established, extremely busy practice with a strong patient demand and long waitlist, offering immediate productivity for an incoming dentist. You'll be joining a collaborative clinical team with strong specialty support, allowing you to focus on general dentistry while having specialists in-house for referrals and case coordination. Practice Highlights Join a team of 2 General Dentists, 1 Pedodontist, 1 Orthodontist, and 2 Oral Surgeons 15 operatories 2 assistants per doctor 2 hygienists Very busy schedule with a long waitlist Patient base is 90%+ Medicaid Managed Care, with negotiated favorable reimbursement rates Bread-and-butter dentistry with flexibility in procedures based on your comfort level Fully digital practice with advanced technology including: Pan/Ceph CBCT Digital workflow throughout Schedule Standard hours: 8:00 AM – 5:00 PM Flexibility available depending on provider preference Compensation & Benefits $1,000/day guaranteed OR 30% of production (whichever is higher) Health insurance Paid holidays PTO About Rochester, NY Rochester is one of Upstate New York's most livable cities—offering a great mix of affordability, culture, and outdoor recreation. The area is known for: A lower cost of living compared to most major Northeast markets Strong food, arts, and festival culture Easy access to the Finger Lakes region, hiking, and waterfront activities A growing healthcare and education presence, including the University of Rochester and a strong medical community Rochester is a great fit for someone who wants a stable community, four-season lifestyle, and strong professional opportunity without the cost and congestion of a major metro.

Job DescriptionDescription: Description Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit, • Pet insurance enrollment option The hours for this position are Monday - Thursday 3:00 pm - 1:30 am. Summary: The CNC Machinist is responsible for the safe operation and set up of a wide variety of Computerized Numerical Control Machining Centers (CNC) or other production machines using programs and tooling that have been previously used to manufacture a product and is capable of doing this with little supervision. • Must work with Management to debug and optimize manufacturing processes for jobs or machines which they are responsible., • Must demonstrate a very high level of competency with all types of metal working equipment, both manual and CNC., • Must demonstrate the ability to debug machining processes and communicate those processes for manufacturing., • Must be able to diagnose process problems and determine the cause of the problem., • Must be able to implement corrective action to prevent reoccurrence of problems., • Must be aware of the budget and delivery requirements for work assigned to them and report to management any difficulties that would cause the cost of the work to exceed budget or miss a scheduled delivery., • Must have a thorough understanding of safe operation of metal working equipment, including but not limited to starting and stopping the machining cycle, interrupting the machine cycle, performing offsets to tool length and diameter and restarting the machining cycle., • Must have a thorough knowledge of CNC program code and be able to document and perform edits of the code to enhance machining processes., • Installs machining fixtures and tooling using Tool Sheet and Setup instructions with no supervision., • Orients fixtures and tools to machine coordinate systems, inputs machine, fixture and tool offsets., • Loads appropriate CNC program into machine control., • Loads material into holding fixtures, following verbal and/or written instructions., • Produces “first piece” from setup while observing machining cycle to prevent damage to work piece, tooling, machine or injury to operator., • Must be able to read, understand and interpret blueprints and specifications, including GD&T., • Observes and listens to machine operation to detect malfunctions, such as worn or damaged cutting tools., • Performs a variety of inspection and gaging operations to insure maintenance of quality standards and specifications and have the ability to record the results of these inspections., • Notifies supervisor of discrepancies., • Must be able to train CNC Operators in the safe operation of the machines that they have set up., • Cleans machine, tooling, and parts as instructed., • Performs daily preventative machine maintenance as instructed., • Other duties as assigned. Requirements: Education • High school diploma or general education degree (GED) required., • 5+ years related experience and/or training; or equivalent combination of education and experience required. Skills: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, mechanical drawings and specifications., • Ability to write routine reports and correspondence., • Ability to speak effectively before groups of customers or employees., • Ability to add and subtract four-digit numbers and to multiply and divide., • Ability to perform these operations using units of measurement, volume, and distance. Basic understanding of Geometry and Trigonometry., • Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form., • Ability to deal with problems involving several variables in situations requiring a high level of judgment and reasoning., • Microsoft Office Suite, • Epicor Vista™ integrated manufacturing and accounting solution, • Adobe Acrobat, • Windows Operating Systems, • Internet Explorer or equivalent, • Must be able to read, understand and interpret mechanical drawings., • Working knowledge of “G” & “M” Codes is required., • Demonstrate a working understanding of CNC Machine Coordinate Systems., • Demonstrate competency on a wide variety of machines and controls.

Job Description Why Work at Arnold? Arnold Magnetic Technologies is a global leader in high‑performance magnetic materials and precision assemblies. Our products power innovations in aerospace, defense, energy, medical, and automotive applications. When you join Arnold, you’re joining a team focused on technical excellence, operational integrity, and advancing next‑generation magnetic technologies. Job Summary Arnold Magnetic Technologies is seeking a strategic, hands‑on Manufacturing Engineer Supervisor to lead, develop, and elevate its manufacturing engineering and technician team. This role is responsible for optimizing production processes, improving operational efficiency, enhancing product quality, and supporting the company’s industrial, aerospace, defense, medical, and commercial product lines. The Manufacturing Engineer Supervisor serves as a critical link between engineering, production, quality, supply chain, and leadership. This role requires strong technical expertise, proven leadership experience, and the ability to drive continuous improvement within advanced manufacturing environments involving engineered materials and precision assemblies. Key Responsibilities • Supervise, coach, and develop a team of manufacturing engineers and technicians., • Evaluate and refine manufacturing processes to improve throughput, reduce waste, and strengthen product quality., • Partner with production and quality teams to identify and resolve daily technical issues., • Establish and maintain process documentation, including control plans, standard work, and work instructions., • Lead initiatives related to process optimization, workflow improvements, and equipment upgrades., • Ensure compliance with company safety standards and promote a culture of safe work practices., • Track and report key performance metrics to leadership, providing insights and recommendations., • Collaborate with suppliers to enhance equipment performance and optimize materials used in production. Minimum Requirements • Bachelor’s degree in Manufacturing, Industrial, Mechanical Engineering, or a related technical field., • 5+ years of experience in manufacturing engineering, including at least 2 years in a leadership or supervisory role., • Strong understanding of manufacturing processes, lean principles, and quality management systems., • Skilled in CAD software and manufacturing process simulation tools., • Strong communication and interpersonal skills, with the ability to lead teams and collaborate cross‑functionally. Preferred Qualifications • Master’s degree in Engineering or Business., • Lean or Six Sigma certification (Green or Black Belt)., • Experience with ERP systems such as SAP or Oracle; Syteline preferred., • Experience in regulated industries such as aerospace, automotive, or medical devices. Key Skills & Competencies • Expertise in manufacturing process engineering and continuous improvement., • Proven leadership abilities with experience managing both engineers and technicians., • Strong analytical and problem‑solving skills., • Proficiency with CAD and process modeling tools., • Working knowledge of lean methodologies and quality systems. #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran

Job Description Associate Dentist ASSOCIATE GENERAL DENTIST | $275K–$450K+ EARNING POTENTIAL | MODERN DIGITAL PRACTICE | 4-DAY WORKWEEK Sign-on bonus- $40,000 Relocation bonus YES Retention bonus $25,000 (annually) What We Offer Annual earning potential of $275,000–$450,000+, commensurate with clinical skill and procedure mix Compensation based on 42.5% of adjusted production minus lab fees (open to discussion) Daily minimum of $1700 guaranteed during the first 3 months for onboarding support Full clinical autonomy in treatment planning and execution 4-day workweek (Monday–Thursday) with three-day weekends every week Calm, well-supported work environment with experienced clinical and administrative staff A very systematized office for smooth and efficient work environments and low- stress for both patients and staff No weekend hours, no Medicaid, and no HMOs Dental & and; vision insurance (optional) 401k (optional) Qualifications DDS or DMD from an accredited dental school Active dental license Minimum of 3 years of clinical experience preferred Proficient in general procedures and committed to high-quality, patient-centered care Team-oriented, dependable, and motivated to grow clinically and financially Schedule Full-Time: Monday–Thursday, 8:00am to 6:00pm (with a 1-hour lunch break) o Part-Time: Open to 2 or 3 days per week, with flexible scheduling options o Ideal for: Those seeking a balanced work-life schedule, with 3-day weekends every week Technology Our practice is fully digital and equipped with: CEREC same-day crown technology Intraoral scanners for efficient and accurate diagnostics KaVo implant system for advanced surgical and restorative procedures Laser dentistry for soft tissue procedures and improved patient comfort We continually invest in modern equipment to support high-quality, efficient, and patient- centered care. Daily Guarantee Yes What procedures will the associate be doing? Preventive and comprehensive care in all aspects of general dentistry Bread-and-butter procedures including: o Crown and bridge (including implant restorations) o Composite restorations o Surgical extractions and bone grafting o Dentures and removable prosthodontics o Endodontics for anterior and premolars Optional procedures such as molar endo, implant placement, clear aligners, and cosmetic cases (not required but strongly supported and highly compensated)

Job Description Title CNC Operator 1 Department Machine Shop Reports to Machine Shop Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths to work on market-leading programs across a variety of industries. Schedule: Monday-Friday, 2:00 PM-10:30 PM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 2nd Shift. Includes a 5% shift differential. Position Overview: A CNC Operator is responsible for running CNC mills and lathes to produce quality parts by following established setups, work instructions, and inspection requirements. This role focuses on loading material, operating machines safely, monitoring production, and ensuring parts meet specifications using basic measurement tools. Work is performed in a low-mix, high-volume setting where repeatability, attention to detail, and adherence to process are critical. The operator is responsible for monitoring machine operation, performing basic in-process inspection using standard measurement tools, and identifying and escalating issues that impact quality or production. Key Responsibilities: • Operate CNC mills and lathes using existing programs, setups, and work instructions., • Load and unload raw materials, fixtures, and finished parts to support continuous production., • Monitor machine operation and part quality during production runs, identifying issues such as tool wear, dimensional variation, or machine abnormalities., • Make basic adjustments such as tool offsets or feed/speed changes when trained and authorized., • Inspect parts using calipers, micrometers, height gauges, and other standard measuring tools to verify conformance to specifications., • Accurately complete production and inspection documentation in accordance with internal procedures, • Communicate quality or equipment issues to supervision or technical leads for resolution, • Maintain a clean, organized, and safe work area and perform routine operator-level maintenance tasks., • Be available for occasional overtime to support production needs. Required Qualifications: • High School Diploma or GED., • Prior experience operating CNC mills or lathes in a manufacturing environment., • Ability to read basic blueprints and understand part dimensions and tolerances., • Familiarity with standard inspection tools. (e.g., calipers, micrometers, height gauges), • Basic understanding of machining concepts, including feeds, speeds, and tool wear., • Ability to follow established work instructions and perform tasks consistently in a production environment. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and tuition reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Environment & Physical Demands: • Work is performed in a manufacturing environment with CNC equipment, involving exposure to moving machinery, moderate to loud noise, and materials such as oils, coolants, and cleaning agents., • Requires extended periods of standing and active machine operation, including frequent use of hands for loading parts, operating controls, and handling components., • Regular movement between workstations may be required to support production flow., • Use of appropriate personal protective equipment, including safety glasses, is required., • Basic computer use is required for documentation and production tracking., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Schedule: Monday-Friday, 2:00 PM-10:30 PM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 2nd Shift. Includes a 5% shift differential.

Job DescriptionDescription: General Job Summary: Develops and maintains software programs and libraries for the CNC Fabrication equipment (turret punches, lasers, combination turret/laser machines, press brakes, etc.) and related automation. Supports additional activities related to the CNC fabrication area as required. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty below satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Responsible for the evaluation and closure of technical NCMR’s (Non-Conforming Material Reports), • Provides technical support for the team across all shifts (manufacturing operators, maintenance associates, engineers, and supervisors), • Identify and support “lights out” operations through related programming activities., • Serve as a backup when needed for the development of MPCD’s (Manufacturing Process Control Document) for fabricated products., • Evaluates and closes action item requests generated from pre-production review activities (NORP / Proview), • Other duties as assigned by supervisor. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); 3-5 years related experience or training Associates degree (A.A.) preferred (Manufacturing Technology or related) or equivalent combination of education and experience. Experience 3-5 years of related experience or training Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Word / Excel / Outlook, Internet Explorer, Auto-CAD, strong 3D modeling (SolidWorks). Minimum of 3 years of experience in CNC programming. Working knowledge of Amada and Mazak CNC programming software is preferred (Amada VPSS 4IE Blank, Dr. Abe Bend, Radan). Other Requirements: Mental and visual attention with concentration on detail. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collects data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel and lift and/or move up to 35 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; talk or hear, lift and/or move up to 35 pounds.

Job Description Title Environmental, Healthy & Safety Coordinator Department Facilities Reports to Director Of Facilities SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview: The Environmental, Health and Safety (EHS) Coordinator is responsible for supporting and maintaining environmental, health, and safety programs within our precision manufacturing environment. This role partners closely with operations, facilities, and human resources to promote a safe workplace, maintain regulatory compliance, and support day-to-day EHS activities across the organization. The position plays an active role on the manufacturing floor, supporting safety initiatives, conducting audits and assessments, coordinating employee training, and assisting with industrial hygiene and compliance-related activities. The EHS Coordinator will help identify risks, implement corrective actions, and support continuous improvement efforts related to workplace safety and environmental compliance. Success in this role requires strong organizational skills, consistent follow-through, and the ability to work effectively with employees across both production and office environments. Key Responsibilities: • Support the implementation and maintenance of environmental, health, and safety programs across manufacturing and facility operations., • Partner with department leadership, human resources, and process owners to identify workplace risks, support compliance initiatives, and address EHS-related concerns., • Conduct routine facility inspections, safety audits, and compliance assessments to support adherence with OSHA, EPA, NYSDEC, and applicable local regulations., • Coordinate and support industrial hygiene activities, including exposure monitoring, sampling, and related documentation., • Track, maintain, and follow up on corrective actions, safety concerns, and EHS-related action items to support timely resolution and continuous improvement., • Maintain OSHA 300 logs and support required internal and external regulatory reporting activities., • Coordinate EHS-related training activities, maintain training records, and support employee awareness initiatives across the organization., • Assist with the development, implementation, and continuous improvement of EHS procedures, programs, and documentation., • Support emergency preparedness activities and serve as a point of coordination with external agencies and emergency responders, as needed., • Promote a proactive safety culture through regular interaction with employees and consistent presence within manufacturing and operational areas. Required Qualifications: • Associate’s degree in environmental health & safety, Occupational Safety, Industrial Hygiene, Environmental Science, or a related field; equivalent relevant experience may be considered., • Minimum 3 years of experience supporting EHS programs within a manufacturing, industrial, or regulated production environment., • Working knowledge of OSHA regulations and general workplace safety practices; familiarity with EPA, NYSDEC, or other environmental compliance requirements is beneficial., • Experience conducting safety audits, inspections, incident follow-up, training coordination, or compliance-related documentation within an operational environment., • Strong organizational skills with the ability to manage multiple priorities, maintain accurate records, and follow through on corrective actions and compliance activities., • Ability to read, interpret, and apply technical procedures, safety documentation, SDS information, and regulatory guidance., • Comfortable working directly with employees, supervisors, and cross-functional teams within a manufacturing environment., • Proficiency with Microsoft Office applications, including Excel, Outlook, and Word., • Experience supporting industrial hygiene sampling, environmental monitoring, or regulated manufacturing environments is a plus., • OSHA 30, First Aid/CPR, or related EHS certifications are beneficial but not required. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays. Environment & Physical Demands: • Works in a manufacturing and office environment supporting precision manufacturing operations, with regular time spent on the production floor conducting audits, inspections, training, and compliance activities., • Frequent interaction with manufacturing personnel, production equipment, chemicals, and operational processes in support of environmental, health, and safety initiatives., • Requires prolonged periods of standing, walking, and moving throughout manufacturing and facility areas, with occasional sitting for documentation, reporting, and administrative responsibilities., • May involve exposure to manufacturing conditions including moving mechanical equipment, airborne particles, noise, oils, solvents, adhesives, cleaning agents, and other industrial materials commonly associated with precision manufacturing environments., • Requires the use of personal protective equipment (PPE), including safety glasses, hearing protection, gloves, frocks, or other site-specific protective equipment as required by designated work areas., • Requires sufficient visual acuity and attention to detail to conduct inspections, review safety documentation, identify workplace hazards, and support compliance activities., • Occasional lifting, carrying, or movement of materials, supplies, or safety equipment, typically up to 50 pounds., • May require schedule flexibility to support training activities, incident response, audits, regulatory activities, or production-related needs., • Ability to respond appropriately to workplace incidents or emergency situations as required within the scope of the role. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. This position is scheduled for Monday through Friday, 7:00 AM – 3:30 PM. The role works closely with manufacturing operations and production personnel, requiring consistent on-site presence during core production hours. Occasional schedule flexibility may be required to support training activities, incident response, audits, or operational priorities.

Job Description Position Overview Reports directly to the QA Manager and interacts with all levels of the organization. Works to improve overall effectiveness of the quality management system (QMS) and quality assurance initiatives such as continuous improvement and customer fulfillment. Assists operations and quality management to ensure process control and product conformity is satisfied in accordance with established procedures and policies. Essential Job Functions • Reviews job tickets for specifications and any customer or Diamond special instructions., • Follows all standard operating procedures relevant to job, position and department., • Communicates with other departments on order status and completion., • Must be able to complete quality documentation., • Performs visual quality inspections and finished product audits to meet predetermined customer quality specifications and standards., • Effectively navigates ERP system (Amtech)., • Participates in internal quality audits., • Documents all inspections and any non-conformances found during inspection., • Maintains, understands and is able to use various types of measuring equipment., • Cooperates with other co-workers and operations personnel in a team effort to identify potential quality issues., • May be asked to assist in the resolution of customer complaints., • Reviews job folder prior to production., • Reviews, approves and files completed job folders., • Assists with product sorting., • Reviews and approves customer samples., • Completes Certificate of Compliance (C of C) or Certificate of Assurance (C of A)., • Provides technical assistance to production staff and other departments., • Assists the shift in decision making and issue resolution escalating serious issues to Management., • Reviews and revises QA Department Diamond Work Instructions (DWI) as required., • Interacts with all co-workers in a cooperative spirit., • Discusses and ensures that all job status and issues are thoroughly communicated to the on-coming shift., • Observes all safety rules and procedures., • Keeps work area organized, neat, and clean., • Performs other job duties as assigned. Requirements • Must have high school diploma, G.E.D, or equivalent., • Must have the ability to read and interpret documents such as safety rules, job tickets, and procedural manuals., • Must be able to perform basic arithmetic including addition, subtraction, multiplication and division., • Must have attention to detail and accuracy., • Must be able to complete and maintain detailed records., • Must have computer skills including Word and Excel., • Must have ability to follow written and verbal instructions., • ISO9001 experience preferred., • General understanding of manufacturing processes is preferred., • Must have 1-3 years of experience in quality assurance., • Will be required to pass color blindness Munsell 100 testing., • Must be able to use standard measurement tools to inspect product., • Must have excellent interpersonal skills., • Must be able to maintain good attendance., • Must be willing to work overtime as needed. Must be reliable and dependable 3rd Shift (11:00pm - 7:00am)

Job Description The Opportunity: We are seeking a skilled and experienced senior electrical engineer, with a focus on RF design, to join our dynamic team. The successful candidate will be responsible for designing, developing, and testing printed circuit boards (PCBs) and electrical system for Safran products. As there is a focus on RF design, the ideal candidate brings a solid foundation in RF engineering and is comfortable stepping into an RF role while also supporting general hardware development activities. This role requires an understanding of electric components, circuit design, and PCB layout, as well as proficiency in industry-standard software and tools. The engineer will work through the full hardware development lifecycle: from concept, schematic capture, and layout review to hardware integration and system validation. Our Technology: We’re the world leader in Resilient Positioning, Navigation and Timing (R-PNT) solutions that improve the reliability, performance, and safety of critical high-risk operations, even in GPS/GNSS denied environments. We provide virtually fail-safe GNSS and PNT solutions and applications for military and government contract customers. How I will Contribute: • Design, development, build and test PCB prototypes, conduct debugging and troubleshooting to identify and resolve issues. Lead smaller projects related to large scale design efforts., • Design, develop and test electrical hardware systems and components for electrical systems, • Perform detailed circuit design, simulation, analysis (analog, digital, and/or mixed signal), • Guide integration, optimization, and troubleshooting the system performance of RF/photonic subsystems, • Support system-level analysis for RF performance, including impedance matching, isolation, noise figure, and signal chain integrity, • Design, simulate, and validate RF circuits including match networks, filters, amplifiers, and interfaces to agile or software-defined transceivers, • Work with counterparts to translate component-level specifications into system requirements, and flag where performance claims won’t translate into full RF performance, • Support qualification and validation of key RF test infrastructure, • Develop and maintain electrical component and hardware specifications and design documentation, • Collaborate with cross-functional teams, including software engineers, mechanical engineers and manufacturing, to ensure timely delivery of high-quality products, • Work with a cross-functional team of engineers, providing technical leadership across projects, • Collaborate on schematic capture, PCB layout, and component selection ensuring best practices for both RF and mixed-signal performance., • Develop and execute test plans and procedures to ensure the quality and reliability of electrical hardware systems and components, • Create and maintain detailed design documentation, including schematics, layout files, BOMs (Bill of materials) and test plans., • Ensure designs comply with industry standards and regulatory requirements, including MIL-STD, EMI/EMC and safety standards, • Develop and maintain relationships with vendors and suppliers to ensure the availability of materials and components, • Collaborate with manufacturing teams to ensure the successful transition of electrical hardware designs to production., • Stay updated with the latest advancements in PCB design, materials and manufacturing processes to continuously improve product quality and efficiency What You Bring to the role: • 4+ years with A Bachelor’s, or 2+ years with a master’s degree, in Electrical Engineering, Electronics Engineering, or a related field, • Experience in RF and electrical hardware design and validation, • Hands-on experience in designing and testing RF systems and subsystems, • Proficiency in electrical hardware design tools, such as Altium Designer, Cadence Allegro, or OrCAD, • Understanding of PCB layout best practices, including high-speed design, EMI/EM considerations, thermal management, RF isolation, and manufacturability, • Familiarity with industry standards and regulations, such as FCC, EL, CE, and MIL-STD testing, • Strong understanding of analog, digital, RF, and/or power supply circuit design, • Proven ability to work across engineering domains, • Experience with high-speed PCB design and signal integrity analysis is a plus, • Knowledge of manufacturing processes, DFM (Design for Manufacturing), and DFA (Design for Assembly) principles, • Documented active US Government Security Clearance at the Secret level or higher highly preferred., • Strong written and verbal communication skills, • Positive attitude and ability to engage and influence, • Excellent communication and teamwork abilities, • Ability to manage multiple projects and meet deadlines Some of the Good Stuff: • Annual Bonus Opportunity, • Medical, Dental, Vision, Health Savings Account, Flexible Spending Account, • Paid Time Off, • 401k Retirement Program with Employer Match, • Gym Membership Reimbursement, • Tuition Reimbursement Program, • Employee Career Development, • Flexible working arrangements, • Excellent culture About Safran Federal Systems: Safran Federal Systems has been awarded as a Winner of the USA Today and Rochester Metro Area Top Workplaces 2026 Award. In 2022, Safran acquired Orolia, now Safran Trusted 4D, the world leader in Resilient PNT. At the intersection of critical infrastructure and national defense, Safran Trusted 4D solutions govern and protect the integrity of systems that shape the world. In early 2019, Orolia Defense & Security spun off as a separate entity from its parent company Orolia, with the mission of providing resilient Positioning, Navigation and Timing (PNT) solutions and custom engineering services to U.S. Government agencies, U.S. Defense organizations, and their contractors. In August of 2019, Orolia Defense & Security acquired Talen-X, a U.S. company specializing in advanced GNSS (Global Navigation Satellite System) Simulation solutions and Interference, Detection, and Mitigation (IDM) technologies. Talen-X's portfolio was an ideal fit and has helped to enhance Safran FS's overall offerings. The acquisition enabled Talen-X's existing resources, operations, and capabilities to be scaled and accelerated to better support the warfighter. Read the press release here. Safran Federal Systems operates as a proxy-regulated company, Free of Foreign Ownership, Control, or Influence (FOCI). As such, Safran FS Defense & Security is approved to work on the full spectrum of U.S. Government classified and unclassified projects and is positioned to support strategic partnerships in the development of key PNT technologies for the defense market. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Please note this description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Classification: Non-exempt The Load Builder receives finished products from production departments and organizes them into route carts or bins for delivery or storage. You will assemble customer orders for shipment as part of the production and distribution team. The Load-Builder reports to the Production Manager. You Will: • Receive finished, cleaned products from production departments and organize them for order assembly., • Review packing requirements and place correct products into designated route carts, bins, or storage locations., • Maintain product flow in the load-building area to support delivery schedules., • Identify and report product shortages, discrepancies, or quality concerns to management., • Meet established productivity, quality, and safety standards, including proper use of Personal Protective Equipment (PPE)., • Log in and out of Spindle (internal productivity tracking system). What You Bring: • Recognize product colors, sizes, and types., • Counting and sorting of textiles for order assembly., • Inspection of finished products to identify quality concerns., • Follow written packing instructions and operational procedures. Work Environment and Requirements: • You will perform physical tasks throughout the work shift. These tasks include standing and walking for extended periods; reach overhead; push and pull carts or bins; grasp and handle textiles; lift up to 25 pounds; and stoop or bend., • Work in production areas of an industrial laundry facility may include exposure to temperature variations, humidity, odors, lint, and dust. Our Benefits: • 401 K Plan with Company Match, • Medical, Dental, Vision, and FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Employee Assistance Program (EAP) Benefits may vary for positions covered by a collective bargaining agreement. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. About Us: We are Alsco Uniforms. We've been committed to our customers since 1889, proudly pioneering the uniform and linen rental industry and growing into a global leader serving over 350,000 customers across 13 countries. We provide exceptional service and create solutions that strengthen our customers’ operations. At Alsco, our diverse workforce drives performance, innovation, and exceptional service. We're looking for individuals who want to build a rewarding career while making a meaningful impact. Explore how Alsco helps you build a successful career with competitive compensation, benefits, and ongoing opportunities for growth. Join our team and build your career with Alsco Uniforms! Equal Opportunity Employer: Alsco Uniforms provides equal employment opportunities to all applicants and employees without regard to race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status, or any other status protected by applicable federal, state, or local law. The Company also provides reasonable accommodation to qualified individuals with disabilities in accordance with applicable law. Thank you for your interest in joining Alsco Uniforms. Employment is contingent upon successful completion of background and drug screening.

Job Description Kamco Supply is a 2nd Generation owned company that started 35 years ago in 1 location in Connecticut. It has grown to 9 branches from Buffalo NY to Cranston RI with a current fleet of 75 trucks of which 35 are boom truck and 3 are 8 story booms and over 500,000sf of warehouse/showroom space. SUMMARY: The job responsibilities for this position include all aspects of the preparation of hollow metal/stainless steel doors and panels including door hardware preps (locks, hinges, strikes, closers, etc.), door lite preparation (cutting opening, kit installation, glazing, etc.), installing reinforcements, custom sizing of doors, and metal work. More specifically, the job activities include interpretation of shop orders, shop drawings and hardware templates to prep door/panel components to specifications. The prepping process includes arc welding, cutting, grinding/polishing, cleaning of metal, touch-up spray painting, cutting and installing glass and packaging. Other activities include: fork lift operation, raw material inventory management and other material handling activities. Maintain 5-S standards and housekeeping of Door Shop area along with tools and workbenches. Also expected to actively support and participate in Continuous Improvements activities by applying Lean Manufacturing tools to daily activities, such as warehouse, inventory management and other material handling activities. ESSENTIAL DUTIES AND RESPONSIBILITIES: Including but not limited to: • Identifying and obtaining pertinent information from shop orders, shop drawings and hardware templates regarding hardware and manufacturing specifications., • Set-up and operation of various bench and hand power tools including bench and hand grinders, cut-off saws, band saw and plasma cutting torch., • Set-up and operation of and arc welding equipment in prepping and modifying metal doors/panels and their components and other light gage sheet metal. Cuts door down in size with power hand saw and cuts preps with other power tools., • Working with variety of materials including: sheet metal, body putty, sanding/grinding and spray painting of metal doors sheet steel and caulks and glass., • Working safely and maintaining consistent quality of work at efficient productivity rates. Safe operation of fork lifts for movement of materials., • Maintain accurate paper work and record keeping for production history and for inventory control., • Accurately pulling and marking doors required for job., • Welds in flat, horizontal and possibly vertical positions. Manually guides electrode or gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle., • Grinds welds and body putty repairs flush and smooth, with proper feathering of affected area to flat surfaces. Clean and prep doors for prime paint touch-up, if applicable by sanding marks and damage and removing weld spatter and grinding dust., • Effectively communicating with supervisor/lead person, co-workers, office personnel and internal customers. Actively participate in door and process design and improvement activities., • Assisting in other operations, as needed, including warehouse support, special project installations and other production area support. COMPETENCIES: To perform the job successfully, an individual should demonstrate the following: • Analytical: Synthesizes complex or diverse information; Uses intuition and experience to complement data., • Design: Translates concepts and information into images; Uses feedback to modify designs; Demonstrates attention to detail., • Problem Solving: Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Technical Skills: Strives to continuously build knowledge and skills; Shares expertise with others., • Interpersonal Skills: Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication: Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings., • Written Communication: Able to read and interpret written information., • Teamwork: Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed., • Quality Management: Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness., • Cost Consciousness: Develops and implements cost saving measures., • Organizational Support: Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values., • Judgement: Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process., • Motivation: Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence., • Professionalism: Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Quality: Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Quantity: Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly., • Safety and Security: Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions ; Uses equipment and materials properly., • Adaptability: Adapts to changes in the work environment; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events., • Attendance/Punctuality: Is consistently at work and on time., • Dependability: Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals.; Completes tasks on time or notifies appropriate person with an alternate plan., • Initiative: Looks for and takes advantage of opportunities; Asks for and offers help when needed., • Innovation: Meets challenges with resourcefulness; Generates suggestions for improving work. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Education / Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience., • Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to other employees of the organization., • Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to calculate figures and amounts such as area, circumference, and volume. Ability to apply concepts of basic geometry., • Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • To perform this job successfully, employee must be willing to:, • Work with minimal supervision., • Work individually and with others., • Participate in problem solving and Lean Activities and identification of unsafe conditions related to job., • Learn and understand basic principles of metal forming., • Perform other activities as requested by supervisor and/or lead person. CERTIFICATES, LICENSES, REGISTRATIONS: Forklift Safe Operation Certificate is required through internal training and certification. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, bend, use hands to finger, handle, or feel; and reach with hands and arms, perform low level activity and grip up to 35# force. Occasionally sit, lift up to 90# Floor to 36", lift up to 30# Waist to 79" push/pull up to 110# on Hand Truck vertical pull up to 65#, climb/step up 19". Heavier loads are typically handled with OH cranes and other lifting devices. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts of machinery and hand power tools and sharp edges on material. The employee is occasionally exposed to risk of electrical shock, risk of radiation (in the electromagnetic fields around the welding equipment), and vibration from hand power tools. The noise level in the work environment is usually very loud. The employee is occasionally exposed to fumes or airborne particles. Employees are required to wear protective clothing, steel toe safety shoes, safety glasses and ear plugs in designated work areas.

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Works on the highest level, most complicated jobs. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Mentors and leads lower level employees. Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently able to: • Operate CNC mills and/or lathes running new and existing production processes using proper procedures and equipment to establish and ensure consistent and quality parts, optimum perishable tooling usage, and acceptable quality levels., • Work with Set-up Operators debugging and developing new production processes and learning set-up skills., • Perform routine preventative maintenance, as required., • Provide training and instruction as needed to CNC I, II, and III operators in the operation and preventative maintenance of CNC mills and/or lathes and proper usage of required inspection equipment., • Monitor and maintain perishable tooling inventory for each assigned job., • Establish and perform all required inspection duties to maintain acceptable quality levels., • Record Statistical Process Control (SPC) data, as required., • Inform supervisor of any problems associated with equipment, processes or procedures trying to explore, develop and recommend continuous improvement ideas., • Analyzes blueprint and specifications., • Complete job related paperwork accurately and completely, which includes: expedite sheets, move tickets, and job cards., • Advanced GD&T skills., • Basic and Advanced Vantage training., • Perform basic to complicated repeat set-ups, tear downs and organize perishable tool list – tool list to proper kit location., • Verifies spindle, feed rate, depth of cut and tool positions relative to work piece., • Follow company policies as outlined in the employee handbook., • Other duties may be assigned. Supervisory Responsibilities This position may have team leadership responsibilities. Education, Training and/or Experience High school diploma, general education degree (GED), and/or technical school, associates degree; and five to seven years related experience and/or training; or equivalent combination of education and experience. Requirements: Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others! EEO Statement PGM will consider all individuals for any position for which they are qualified and able to perform. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, or national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, protected veteran status, or any other characteristic protected by law.

Job Description Title Injection Molding Process Technician Department Plastics Reports to Plastics Manager Schedule: Monday-Friday, 2:00 PM-10:30 PM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 2nd Shift. Includes a 5% shift differential. SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview: The Injection Molding Process Technician is responsible for setting up, troubleshooting, and optimizing injection molding processes used in the production of precision optical components. This role plays a key part in supporting production by performing mold changeovers, establishing process parameters, monitoring product quality, and driving process improvements to achieve yield, quality, and production goals. The ideal candidate is a hands-on manufacturing professional with experience in injection molding who understands the relationship between tooling, machine parameters, and part quality. This position works closely with production, quality, engineering, and maintenance teams to ensure safe, efficient, and repeatable manufacturing operations. Key Responsibilities: • Perform mold installations, mold changeovers, and machine setup activities in preparation for production runs., • Establish, adjust, and document injection molding process parameters to achieve quality and production requirements., • Start up, validate, and monitor production jobs following mold changes, maintenance activities, or process adjustments., • Troubleshoot molding defects, process variation, machine issues, and tooling concerns to maintain production performance., • Monitor process stability and make adjustments as necessary to improve yield, quality, and throughput., • Perform mold tear-downs and follow established mold removal, staging, and storage procedures., • Disassemble, clean, inspect, maintain, and reassemble molds in accordance with departmental standards., • Perform mold insert changes and verify proper tooling configuration prior to production., • Conduct in-process inspections and communicate quality concerns to production, quality, and engineering personnel., • Utilize precision measuring equipment, including calipers, micrometers, profilometers, and other inspection tools to verify product conformance., • Operate and support optical and mechanical testing equipment used to evaluate molded component quality., • Accurately document process parameters, setup information, maintenance activities, and inspection results., • Support continuous improvement initiatives focused on process capability, cycle time reduction, quality improvement, and waste reduction., • Maintain compliance with safety requirements, quality standards, Lean Manufacturing principles, and 5S practices., • Support overtime, off-shift, or weekend coverage as required to meet production demands., • Perform other duties as assigned. Required Skills & Qualifications: • High School Diploma or GED required. Technical training, apprenticeship, trade school education, or an associate degree in a manufacturing-related discipline is preferred., • Minimum of 3 years of experience as an Injection Molding Process Technician, Mold Technician, Setup Technician, or similar role within a manufacturing environment., • Experience performing mold changeovers, machine setup, process adjustments, and production start-ups., • Strong understanding of injection molding processes and the impact of process parameters on product quality and consistency., • Proven ability to troubleshoot molding defects, tooling issues, and process-related challenges., • Experience using precision measuring equipment such as calipers, micrometers, indicators, and other inspection tools., • Strong mechanical aptitude and ability to safely work with molds, tooling, and manufacturing equipment., • Ability to read and interpret work instructions, setup sheets, process documentation, and production requirements., • Strong attention to detail with a commitment to product quality and process control., • Ability to work independently and make sound decisions in a fast-paced manufacturing environment., • Effective communication skills and ability to collaborate with production, quality, engineering, and maintenance teams., • Experience within precision manufacturing, optical manufacturing, medical device manufacturing, or other highly regulated manufacturing environments is preferred. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Work Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, use hands & fingers, handle or feel, and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch, talk and hear., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand, and finger dexterity, including ability to grasp., • The job may involve prolong periods of standing., • Highly repetitive work, usually in a fixed body position for a sustained period of time., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses and hearing protection are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday-Friday, 2:00 PM-10:30 PM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 2nd Shift. Includes a 5% shift differential.

Job Description Title Optical Assembler Department Assembly Reports to Assembly Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview The Optical Assembler plays a critical role in the production of high-performance optical components and assemblies used in military systems, advanced imaging and sensing equipment. Many of the products built in this role support mission-critical equipment – including ruggedized optics, low-light imaging devices, and components integrated into defense, surveillance and field-deployed platforms. This position requires exceptional attention to detail, steady hands, and a disciplined approach to following technical work instructions. You will assemble, align, inspect and verify optical components that must perform reliably in demanding environments, from extreme temperatures to high-vibration field conditions. This role is ideal for someone who takes pride in craftsmanship, thrives in a clean, controlled manufacturing environment, and understands the responsibility of building components that professionals depend on in real-world operations. Key Responsibilities: • Assemble precision optical components and mechanical subassemblies using specialized tools and fixtures to meet daily production targets., • Performa fine alignment of optical elements using microscopes, interferometers and laser alignment systems., • Apply adhesives, epoxies and bonding agents with controlled volume and placement, following cure schedules and handling requirements., • Install mechanical fasteners to exact specifications to maintain optical alignment and structural integrity., • Inspect incoming and in-process optical components for defects such as scratches, digs, chips, coating issues and contamination., • Verify optical performance using test equipment such as interferometers, MTF benches, spectrophotometers and optical comparators., • Document inspection results and maintain traceability through travelers, routers, or ERP system., • Identify nonconformance's and collaborate with quality and manufacturing engineering to resolve issues., • Follow detailed work instructions, assembly drawings, and standard operating procedures (SOPs) with zero deviation., • Maintain cleanroom environment standards., • Record production data accurately, including lot numbers, serial numbers, material usage and process steps., • Support continuous improvement initiatives by providing feedback on tooling, processes, and documentation. Required Skills & Qualifications: • High School Diploma/GED Required., • 1–3 years of experience in a manufacturing environment, including hands-on assembly, micro-assembly, or similar precision work. Candidates with other precision, hands-on experience demonstrating strong attention to detail and manual dexterity will also be considered., • Strong manual dexterity and ability to work with small, delicate components under magnification., • Strong attention to detail, consistency, and process discipline., • Ability to read and interpret technical drawings, schematics, and work instructions, • Experience in optical assembly or working with precision optical components a plus., • Familiarity with optical handling, cleaning, and contamination-controlled practices., • Comfortable working in a cleanroom or controlled environment., • Experience with ISO 9001 quality systems a plus., • Familiarity with computers and ERP systems for recording production data. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match & tuition reimbursement opportunities., • Health, dental, vision & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Work Environment & Physical Demands • Work is performed in a cleanroom and manufacturing environment with exposure to moving equipment, moderate to loud noise, and materials such as oils, solvents, and cleaning agents, • Requires use of appropriate personal protective equipment, including safety glasses and cleanroom garments, • Position involves a combination of standing, walking, and sitting for extended periods, along with occasional stooping, kneeling, and reaching, • Frequent use of hands for handling and assembling small components requiring fine motor coordination and dexterity, • Sustained visual focus is required, including close-up and magnified work, with the ability to identify fine detail and adjust focus as needed, • Regular use of computers and standard assembly or inspection tools, • Ability to lift up to 50 lbs. as needed, • Work may shift between stations and may require schedule flexibility, including overtime or weekend work based on production needs Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. A Shift Schedule: Monday - Friday, 6am - 2:30pm B Shift: Mon - Fri 2pm - 10:30pm Training to be conducted on A shift for 2 - 4 weeks before transitioning to B shift schedule

Job Description Title Optics Technician Department Operations, Production Engineering Reports to Director of Production Engineering SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview: The Optics Technician provides technical support for all aspects of the RPO ISO 9001 Quality Management System. May be required to assist with inspection of material and product while creating, maintaining, and controlling the related records and procedures per customer requirements. May be required to provide guidance and direction in completing a variety of tasks in support of Operations. Occasionally performs related processes such as product cleaning, sorting, and defect classification. Must be capable of supporting various manufacturing, coating, and assembly operations. Ensures the support of the shipment of products with data gathering, analysis, reporting, and conformance verifications. Must be capable of initiating and supporting trouble-shooting and problem-solving actions. May work in a cleanroom environment and low-light areas. Key Responsibilities: • Develop sampling plans for specific optical components using engineering drawings, specifications, and reference materials., • Collaborate with Production Engineering, Quality, and Production Departments to provide technical updates, answer questions, and resolve day-to-day production issues., • Perform optical metrology and inspection activities to verify product conformance., • Support root cause investigations, recommend corrective actions, and assist with the disposition of non-conforming products., • Attend and support Manufacturing Review Board (MRB) meetings by providing inspection data and technical findings., • Develop inspection procedures from engineering drawings, specifications, and quality requirements., • Accurately document test results, inspection findings, and labor transactions within computerized systems., • Interpret coating performance data and metrology results to evaluate product quality., • Interpret work instructions and provide on-the-job training (OJT) to operators and technicians., • Perform dimensional inspections using precision measuring equipment including micrometers, calipers, measuring microscopes, Pearl Scopes, beam deviation equipment, and transmission testing equipment., • Perform visual inspections to identify cosmetic and functional defects in accordance with established standards., • Support continuous improvement initiatives related to inspection methods, product quality, and manufacturing processes., • Perform other duties as assigned. Required Qualifications & Skills: • Associate degree in Optics, Engineering Technology, Quality, Statistics, or a related technical discipline, or equivalent combination of education and experience., • 1–3 years of experience supporting optical inspection, optical metrology, quality, or technician activities within an optical manufacturing environment., • Ability to read and interpret engineering drawings, blueprints, GD&T, customer specifications, and industry or military standards., • Experience developing inspection plans, sampling plans, inspection procedures, or quality documentation based on customer and internal requirements., • Proficiency with Microsoft Office; experience using Minitab or similar statistical analysis software preferred., • Excellent communication and interpersonal skills with the ability to collaborate across departments and provide guidance or on-the-job training to coworkers., • Strong attention to detail, manual dexterity, and the ability to perform repetitive inspection and testing activities with a high degree of accuracy., • Understanding of Quality philosophies and standards such as the PDCA cycle, Six Sigma, Lean Manufacturing, Continual Improvement, Gage R&R, ISO 9001 preferred., • Ability to create project plans and interpret work instructions., • Ability to interact well and provide direction for co-workers., • High tolerance for repetitious inspection and testing., • Ability to use basic mechanical inspection equipment. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Environment & Physical Demands: • Work is performed in a controlled manufacturing environment requiring adherence to contamination control practices, including the use of protective garments such as frocks and hair coverings., • Requires use of appropriate personal protective equipment, including safety glasses and cleanroom garments., • Position involves a combination of standing, walking, and sitting for extended periods, along with occasional stooping, kneeling, and reaching., • Frequent use of hands for handling and inspecting small components requiring fine motor coordination and dexterity., • Sustained visual focus is required, including close-up and magnified work, with the ability to identify fine details and adjust as needed., • Regular use of computers and standard assembly or inspection tools, • Ability to lift up to 50 lbs. as needed., • Work may shift between stations and may require schedule flexibility, including overtime or weekend work based on production needs. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EEO/AA/Race/Gender/Disability/Vet In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday - Friday 7am - 3:30pm

Job Description Title: Financial Analyst (Manufacturing) Location: Rochester, NY Duration: Direct Hire Compensation: 80-100k base *Salary negotiated based on experience Work Requirements: Must be authorized to work in the U.S. Summary We’re working with a manufacturing client seeking a Financial Analyst who can operate at the intersection of accounting and finance. This role supports month-end close, financial reporting, and cost/inventory analysis while partnering closely with operations. This is a great fit for someone coming from a Staff Accountant background in manufacturing who wants to grow into a more analytical, business-facing role. Responsibilities • Support month-end close and financial reporting (daily/weekly/monthly), • Perform account reconciliations and assist with balance sheet reviews & audits, • Handle journal entries and general accounting activities, • Support inventory accounting, standard cost updates, and forecasting, • Analyze scrap, rework, and production costs (PAE/GASE analysis), • Manage AR follow-ups, credit memos, and RMA processing, • Assist with payroll reconciliations (weekly/bi-monthly), • Identify areas for process improvement and automation, • Partner with Sr. Financial Analyst and operations teams on cost and performance insights Qualifications • Bachelor’s degree in Accounting or Finance, • 2–3+ years of experience in a manufacturing environment (accounting + analysis), • Strong understanding of US GAAP, • Experience with cost accounting, inventory, or standard costing preferred, • ERP experience (Oracle, QAD, Hyperion, or similar) is a plus, • Strong Excel skills and attention to detail, • Self-starter who can work independently but collaborate with cross-functional teams EEO Statement Summa and our clients are equal opportunity employers and consider all qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, or any other protected status.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol -free working environment. General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: • Know & understand the use of all inspection equipment including (but not limited to):, • Micrometers, • Calipers, • Dial Indicators, • Height Gages, • Optical Comparators, • Gage Pins and Gage Blocks, • Sine Blocks and Setups, • Surface Finish Testers, • CMM, • Thread Gages, • Understand basic Geometric Tolerance. Able to read and understand drawings, • Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949, • Ability to multitask in response to numerous demands; time management skills, • Computer literate: Excel, Word, etc., • Attention to detail Desired Skills: • Experience with inspection and measuring equipment calibration, • Previous auditing experience and skills, • Experience writing procedures and work instructions, • PPAP documentation experience Specific Duties: • Perform first piece, in-process and final inspections, • Provide inspection results for inclusion PPAP's, • Understand cosmetic part requirements based on specific customer standards, • Provide inspection support based on needs of Manufacturing and Engineering Managers, • Maintain up to date documentation by completing all necessary paperwork, i.e. in-process inspection records, signing off on travelers, 1st piece inspection tags, etc., • Perform basic training as required for operator or team leader for First-Piece and In-Process Inspection, • Provide continuous feedback to Production regarding quality, engineering and manufacturing-related issues, • Suggest process improvements, • Perform part and process related internal audits, • Maintain QA Lab and equipment in clean, orderly condition, • Special projects and assignments Physical Requirements: • Regularly lifts and/or moves 25-50 lbs., • Requires frequent reaching, handling and grasping, • Requires occasional climbing of stairs, balancing, bending, crouching, fine manipulation and feeling This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary. Benefits • 401(k), • Health Insurance, • Paid time off, • Vision Insurance, • Dental Insurance, • Life Insurance

Job Description Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager Schedule: Monday-Friday, 10:00 PM-6:30 AM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 3rd Shift. Includes a 10% shift differential. SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Position Overview: The CNC Machinist I is responsible for operating, monitoring, and optimizing CNC machining processes to produce high-precision components in a production manufacturing environment. This role requires a strong understanding of machining fundamentals, blueprint interpretation, inspection techniques, tooling, and process control to consistently achieve quality and production objectives. Working from established setups, programs, and process documentation, the CNC Machinist I monitors machining performance, performs advanced inspections, troubleshoots production issues, and makes appropriate process adjustments to maintain dimensional accuracy, quality, and throughput. This position serves as a technical resource within the machining department and plays a key role in supporting safe, efficient, and cost-effective manufacturing operations. Key Responsibilities: • Review and interpret engineering drawings, blueprints, specifications, routers, and work instructions to understand part requirements, tolerances, and machining processes., • Operate CNC mills, lathes, and other machining equipment using established programs, setups, and process documentation., • Monitor machining operations and make appropriate adjustments to offsets, tooling, feeds, speeds, and process parameters to maintain dimensional accuracy, quality, and productivity., • Perform advanced in-process and final inspections using micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and other precision measuring equipment., • Verify product conformance to dimensional, geometric, and cosmetic requirements and ensure all quality standards are met., • Troubleshoot machining, tooling, quality, and process-related issues and communicate concerns to technical leads or management as appropriate., • Perform tooling changes, tool life monitoring, and wear compensation to maintain stable machining processes., • Assist with machine setup activities, process validation, and first-piece verification when required., • Maintain accurate production, inspection, maintenance, and ERP documentation., • Support continuous improvement initiatives focused on quality, efficiency, throughput, scrap reduction, and cost savings., • Train, assist, and support less experienced operators as needed while promoting best practices within the department., • Perform and document routine operator-level preventative maintenance activities., • Maintain a clean, organized, and safe work environment., • Be available for occasional overtime to support production requirements. Required Skills & Qualifications: • High School Diploma/GED or vocational equivalent required., • Minimum 3 years of CNC machining experience within a precision manufacturing environment., • Demonstrated experience operating CNC mills and/or lathes, including offset adjustments, tooling changes, process monitoring, and troubleshooting production issues., • Ability to read and interpret engineering drawings, blueprints, specifications, and GD&T requirements., • Strong understanding of machining principles including feeds, speeds, tool wear, cutting tool selection, and process control., • Proficiency with precision inspection equipment including micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and similar metrology tools., • Working knowledge of G-code and M-code programming, including the ability to review and perform minor program edits when required., • Understanding of machine setup principles and machining processes, with the ability to support setup and process validation activities., • Strong mechanical aptitude and problem-solving skills with the ability to identify and resolve machining and quality concerns., • Demonstrated commitment to safety, quality, attention to detail, and continuous improvement. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude; Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Environment & Physical Demands: • This position works primarily in a manufacturing environment supporting CNC machining operations and precision component production., • Requires prolonged periods of standing and walking throughout the workday while operating equipment, performing inspections, and supporting production activities., • Regular use of hands, fingers, and arms to operate machinery, handle tooling, manipulate parts, and perform precision measurements., • Frequent lifting, carrying, pushing, and pulling of raw materials, tooling, fixtures, and finished components. Ability to safely lift up to 50 pounds is required., • Requires frequent bending, reaching, twisting, crouching, and movement around machining equipment and workstations., • Regular use of precision measuring equipment including micrometers, calipers, indicators, height gauges, comparators, and other metrology tools., • Requires visual acuity sufficient to inspect parts, identify defects, verify dimensions, review technical documentation, and safely operate equipment., • Frequent interaction with CNC mills, lathes and other manufacturing equipment containing moving mechanical components., • Regular exposure to machine oils, coolants, metal chips, lubricants, cleaning agents, and other manufacturing-related materials., • Safety glasses with side shields and other required personal protective equipment (PPE) must be worn in designated manufacturing areas., • Noise levels are typically moderate to loud and may require hearing protection in designated areas., • Requires routine use of computers and manufacturing software for reviewing work instructions, documenting production activities, accessing ERP systems, and recording inspection data., • May work across multiple machining cells, equipment platforms, or departments based on production requirements and business needs., • Occasional overtime may be required to support production schedules, customer commitments, and departmental objectives. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Schedule: Monday-Friday, 10:00 PM-6:30 AM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 3rd Shift. Includes a 10% shift differential.

Job Description STATUS: Full time / Non-Exempt REPORTS TO: Director, Real Estate Lending LOCATION: Corporate COMPENSATION: The base salary for this position is $75,000 plus commission and bonus. The actual salary will be determined based on experience and other-job related factors, consistent with applicable law. HOURS: 37.5 hours per week SCHEDULE: The expected schedule for this position is Monday through Friday, 8:30AM-5:00PM. Position Summary The Mortgage Sales Manager is responsible for the overall success of First Mortgage originations at the credit union, including the administration, coordination and evaluation of the Mortgage Department policies, procedures, and processes. The Mortgage Sales Manager will lead the member experience effort in overall support of mortgage sales and collaboration with mortgage operations and other Summit Team Members. Essential Responsibilities - Must be capable of performing the following essential responsibilities, with or without reasonable accommodation, as outlined below. • Responsible for achieving individual and Mortgage Department production goals., • Recruit, develop, and train Mortgage Loan Originators that generate high quality loans that are compliant with company policies, procedures, and pricing strategies., • Maintain a high level of knowledge regarding the current trends and economic conditions in real estate lending and servicing to ensure the credit union is maintaining a high level of service when compared to others in the financial services industry., • Ensure that a positive work environment and culture is fostered resulting in satisfied employees in accordance with the credit union’s mission statement and our team values., • Collaborate with other Summit Federal Credit Union team members including Branch Network, Summit Investment and Retirement Services and Business Lending., • Support the Sales and Service Culture at the credit union. Maximize the success of real estate lending and ensure that sales efforts are strongly encouraged and reinforced by management coaching and recognition., • Ensure that all mortgage staff are provided with adequate training and that their sales efforts are in accordance with the credit union’s philosophies. Sales should be based on members’ needs as part of an overall Sales and Service Culture., • Ensure adherence to all policies related to areas of oversight tasked to., • Ensure that up to date training, reference, and other appropriate material are available to assist the mortgage staff in the completion of their duties. Other • Participate in special assignments, project and committees as requested by the Vice President of Lending or Director of Real Estate Lending, • Provide a positive example to all areas in the credit union through his/her interactions with others., • Represents and promotes the credit union within the business community., • Establish and maintain networking relationships throughout the community through involvement and participation in business, social, community and/or political committees, Boards or other activities *Note: The above information on this job has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Qualifications Knowledge and Experience: • Must have 2+ years commensurate work experience required and 1+ years of comprehensive management and mortgage lending experience., • Must be familiar with the financial service industry. Must have 3-5 years’ experience in the financial industry., • Familiarity with lending regulations governing financial institutions, preferably credit unions is desired., • Current knowledge of FNMA underwriting and servicing rules., • Knowledge of Point of Sale and Loan Origination Systems (Empower, Encompass, etc.) Skills • Must possess excellent leadership, interpersonal and communication skills, • Strong organizational skills and attention to detail, • Solid presentation and public speaking skills, • Excellent computer skills, • In depth understanding of our products and services, • Excellent sales and service coaching skills, • Strong problem-solving skills Abilities • Ability to function effectively as a leader., • Ability to oversee planning and execution of new products and/or programs., • Ability to communicate both verbally and in writing at a professional business level., • Ability to work effectively under pressure and against strict time constraints., • Ability to operate a personal computer with the Microsoft Office suite, word processing, spreadsheet and data applications., • Ability to manage multiple priorities, • Ability to communicate effectively with large groups, • Ability to act independently, • Ability to make effective decisions in a reasonable time frame, • Ability to identify and correct areas of inefficiency, • Ability to manage and lead people Working Environment • Must be able to sit or stand for extended periods in an office setting., • Must be able to travel for business related matters. Training and Compliance Requirements • Subject to the compliance requirements of all related federal regulations, including but not limited to; the Bank Secrecy Act (BSA), Anti Money Laundering (AML), Information Security and Privacy policies and procedures. Employees complete annual BSA, AML, Information Security, Privacy and other job-related training requirements as established by the Summit and within deadlines. Licensure Requirements • In compliance with the Secure and Fair Enforcement for Mortgage Licensing Act of 2008 (S.A.F.E. Act) and the statute’s regulations, applicants must be eligible to register as a Mortgage Loan Originator (MLO). Candidates being considered will be subject to a credit check and fingerprinting.

Job DescriptionDescription: General Job Summary: Performs part inspections at all phases of production. Supports Quality Engineering and Engineering with creating documentation for new product. Develops inspection programs for CMM inspection. Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Follows all safety processes and procedures in accordance with the job and company policy, • Understands and follows all quality procedures, • Inspects parts for 1st piece, receiving, finals, and in-process Quality inspections, • Completes First Article Inspection reports and capability study measurements, • Develops inspection programs on the CMM/Vision system/Faro arm/Virtek, • Supports Quality Engineering with quality documents: FAIR template setup, PPAP documents, certifications, capability study reports, etc., • Supports Engineering with creating manufacturing process control documents and quality plans using SolidWorks, • Assists in dispositioning product with quality issues, creating NCMRs, and setting up rework operations Education Experience High school diploma or general education degree (GED). 3-5 years related experience or training Associate’s degree (A.A.) preferred. ASQ Certification preferred or equivalent combination of education and experience. Computer Skills: To perform this job successfully, an individual should have working knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, and Internet Explorer. Familiar with CMM programming software. SolidWorks experience preferred. Minitab experience a plus. Other Requirements: Sheet metal fabrication experience preferred. Understanding and utilization of micrometers, verniers and scales (rulers), height gauges, protractors and optical comparators and coordinate measuring machines (CMM/PC-DMIS). Must have working knowledge of GD&T. Strong math skills with an emphasis on trigonometry and be able to work in inches and millimeters. Advanced measuring equipment (Romer arm, Faro arm, Virtek) experience helpful. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel and lift and/or move up to 50 pounds and parts sizes of 3’ x 3’. PPE: Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. Hearing protection is required in designated areas. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the employee is regularly exposed to wet and/or humid conditions; extreme heat; and extreme cold and the noise level in the work environment is usually loud.

Job Description Job purpose: Responsibilities include processes typical to product verification in a machining and assembly environment; measurement of product against design specifications provided on inspection plans and product drawing information using sophisticated and basic measurement devices. Verifying received components meet requirements prior to use. Supporting the calibration process. Assisting Quality Engineering establish inspection plans. Documenting and electronically storing quality records in appropriate network locations. Basic maintenance of inspection equipment. Assisting with the non-conforming material process. Supporting manufacturing personnel with their understanding of measurement techniques. Other items as required. Duties and responsibilities • A skilled position, the Quality Technician is expected to understand the following after investing effort in the role. Specific knowledge will be trained;, • Perform Quality Technician related tasks in a machining and assembly environment in support of meeting the company quality objectives and Manufacturing Operations delivery commitments., • Inspect incoming materials, manufactured components, and finished goods for conformance to internal and/or Customer requirements following AQL and some 100% inspection, utilizing SPC tools. Generation of Discrepant Material Reports when necessary., • Understand flow-down requirements from Customers, how they are communicated to our outside suppliers, how conformity to those requirements are verified during Receiving Inspection, and how conformity to requirements are verified on processes performed in house., • Interface with Purchasing, Engineering and Suppliers in support of discrepant material resolution., • Generate and store computer-based quality related records including the archiving of component and material certifications, certificates of conformance, and First Article Inspection Reports., • Assist with the preparation of First Article Inspection Reports per AS9102. Understand or learn understanding of the Production Part Approval Process (PPAP). • Provide shop floor support to resolve daily quality related product and process issues. Mentor and train manufacturing personnel in proper measurement techniques., • Review quality documentation to ensure product conformance. Recommend improvement and correction to Inspection Plans for supplied and manufactured materials to ensure compliance to Customer drawing and PO requirements., • Control limited life materials such as adhesives to ensure compliance with expiration dates., • Operate CMM and Keyence measurement systems. Train other QA inspectors and technicians in their operation. Attend training for programming these devices., • Support conformance to the Quality Management System with respect to quality inspection needs., • Support Manufacturing Operations delivery commitments to Customers, understanding production timing and prioritization sequencing of work tasks. Strive to support Operations while assuring conformity to product requirements., • Maintain inspection equipment calibrations utilizing calibration records software. Schedule outside services calibration for items not calibrated in house. Ensure verification equipment is working properly. • Obtain Designated Quality Representative Certification, acting on behalf of the certifying Customer as their agent when certifying their product., • Other duties as assigned. Qualifications • Associate degree in technical field or equivalent technical work experience in a manufacturing environment., • 2-5 years of experience manufacturing environment that includes machining and assembly., • Knowledge of computer software programs including Microsoft Office (Word/ Excel / PowerPoint), • Ability to read and understand product drawings that include GD&T requirements., • Experience with sophisticated quality inspection equipment such as Coordinate Measurement Machines, Keyence, laser scanners, and experience with pin gauges, micrometers, calipers, etc., • Experience with layout / surface plate inspection techniques., • Knowledge of statistical sampling plans., • Ability to communicate clearly and effectively, both orally and in writing. Ability to interact well with all levels of personnel throughout the organization as well as suppliers and customers., • Experience working in a regulated industry with certification to AS9100 or ISO9000., • Ability to organize thoughts and prioritize work tasks based on the needs of the operation., • Be able to manage multiple tasks and meet multiple deadlines simultaneously and have a strong sense of urgency., • Be self-motivated, focused, and detail oriented with a positive attitude. Working conditions, • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning to a steady temperature., • Could work in areas with noise. NOTE: Ear protection available. Physical requirements, • Could require intermittent and long periods of sitting and/or standing., • Some work may be repetitive., • Periodic lifting of materials not to exceed 50 pounds. Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran #ROC Monday - Thursday, 9:30 AM - 7:00 PM; Friday, 7:30 AM - 11:30 AM

Job Description Job Summary: Create, deliver, and maintain the production schedule and distribute plans to Operations Management. Execute, track and maintain advanced resource planning (ARP) process to ensure all scheduled jobs are ready to hit the floor and be completed per the prescribed time constraints cited within the production schedule. Maintain job progress accuracy and identify gaps between the production schedule and the reality of the shop floor - update schedule in real time. Ensure orders are through the operations area and “on-time” to meet customer delivery dates. Using feedback from past performance, improve project scheduling and planning to increase accuracy and OTD. Essential Duties and Responsibilities: SCHEDULING · Provide Sales & Customer Service with firm delivery dates from production schedule. · In Conjunction with Sales & Customer service, monitor scheduled start and progress of all jobs using the ERP system. · In conjunction with Sales & Customer service and Customer Service, monitor the flow of blanket orders (stock jobs) through the shop. · Continually update schedule to reflect possible re-routing or change in flow. · In Conjunction with Sales & Customer service, expedite orders as needed to meet customer deliveries. · Work with purchasing department as production schedule is updated – ensure expected dates for incoming goods are adjusted to properly coincide with the production schedule. · Review outsourced operations within jobs and ensure that PO timing for these services align with successful project delivery. · Serve as liaison between sales demand and operational capacity, ensuring optimization of resources while meeting customer expectations. PLANNING · Ensure all steps in ARP process are completed before job is released to operations. · Plan larger projects (blanket orders) to achieve increased efficiency and lower costs. · Determine when/if OT needed to recover or maintain production workload notify operations manager and general manager in advance. · Monitor scheduled start and end dates of all jobs utilizing the ERP scheduling module and provide weekly status updates on monthly progress. · Review quotes for incoming jobs as needed. Check for alignment on lead times to assist in setting proper customer expectations. · Recommend outsourcing jobs as needed to optimize shop floor activities and overall company output in a cost-effective manner. Additional Responsibilities: · Uses ERP system to retrieve customer information, stock status information, the status of purchase orders’ and recommend changes on customer purchase orders. · Perform cycle counts of raw materials, WIP and finished goods as needed to successfully monitor needs of each scheduled job. · Adjust time tickets to reflect discrepancies discovered in the course of monitoring jobs & the scheduling module. · Assist in annual physical inventory. · Complete special projects as requested. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee must also occasionally lift and/or move up to 50 pounds. Employee must have the ability to solve practical problems, and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: · Bachelor’s degree in supply chain management, business administration, or a related field is preferred. · 1-5 years of experience in production scheduling, planning, or a related role in a manufacturing environment required. · Basic arithmetic skills and attention to details is required. · Ability to use Excel, Word, Outlook and Power Point. · Solid knowledge of manufacturing process from receipt of material to shipment of parts. · Familiar with MRP or ERP Order Entry, Shipping, Purchasing and Receiving (JobBoss2 preferred). · Good communication skills. · Must be a good team player.

Job Description Machinist - Framing Technology Inc. Location: Rochester, NY Work Type: Warehouse Pay: $20-22 per hour Framing Technology Inc. is looking for a motivated, dedicated Machinist to join our team. We manufacture and assemble t-slot aluminum extrusion and use it in applications such as enclosures, industrial fencing, conveyors, and more. The machinist works with drills, saws, and other machines to cut, mill, drill, tap, and deburr the raw aluminum stock. We rely on their precision and accuracy to produce quality parts that later are assembled or sent in kit form to a diverse customer base. As a team-member, your job duties will also include cross-training in other departments and/or performing general warehouse tasks as assigned by your supervisor. Flexibility and a positive attitude are a must. Our belief is that everyone pitches in to help in any area necessary to make sure our customers are satisfied and given a quality product. Employee satisfaction and fulfillment are important at Framing Tech. We offer full-time daytime shifts that are flexible between 6:30 am and 4 pm. Benefits • 40 hours of sick time available to start (pro-rated depending on start date)., • 80 hours of vacation; accrual basis and available to use after 90-day introductory period., • Company-paid high-deductible medical insurance. Additional plans are available for purchase with company contributions., • Company-paid dental insurance., • Vision insurance available for a low weekly deduction., • 4% 401K match, • Company-paid short-term disability (in addition to state STD) and life insurance. Additional life insurance above company plan offered at a low cost. Essential Functions: • Ability to operate and maintain drills, mills, and saws to complete the assigned tasks., • Review drawings, instructions, blueprints, and samples to ensure accurate production., • Select appropriate machine for a given task., • Maintain a clean and safe workstation., • Maintain raw inventory and issues materials as tasked., • Accountable for safety relative to training and compliance in following all policies and procedures., • Contributes to the team by assisting other machinists when needed. Requirements: Education: High school or higher Excellent coordination and mechanical skills Strong attention to detail, accuracy, and safety Proficient in math Basic computer skills Able to comfortably lift 50 pounds and perform repetitive tasks Ability to communicate effectively with both supervisors and coworkers At Framing Tech, we take pride in our work and value our employees who make it all possible. The ideal applicant will be hard-working, reliable, and self-motivated. Experience is beneficial but not required, introductory training is provided. #hc202883

Job Description The Louis S. Wolk Jewish Community Center of Greater Rochester is located alongside the Erie Canal in Brighton and is a 200,000 square foot facility that houses our state-of-the-art fitness, wellness and recreation programming, an aquatics center, a Professional Theatre, Children’s Center and our Camping Program. We pride ourselves on providing our members with quality educational, cultural arts and social programming, and we are an inclusive community center that welcomes people of all faiths, backgrounds, and ages. The Campaign Manager is a key member of the Development team, responsible for managing donor data systems, implementing annual campaign strategies, tracking campaign performance, and generating reports that inform strategic decision-making. This role also supports stewardship activities, coordinates fundraising event logistics, sends mass donor communications, and responds to general donor inquiries. The ideal candidate is proactive, analytical, and equally comfortable behind a spreadsheet or engaging with donors, volunteers, and senior staff. They bring care, discretion, and strong communication skills to this critical role, helping to strengthen community impact through effective and efficient development operations. Essential Duties and Responsibilities: Donor Data & Reporting • Manage and optimize the Raiser’s Edge donor database to ensure accurate and timely gift entry, record maintenance, and overall data integrity., • Leverage advanced features in Raiser’s Edge, including dashboards and segmentation tools, to monitor campaign performance and donor engagement., • Generate and maintain detailed reports on fundraising activity, donor trends, and development metrics to inform strategy and decision-making., • Partner with the finance team to reconcile donations and ensure accurate monthly and annual revenue reporting., • Serve as the primary point of accountability for donor data accuracy and the creation of reports that support development planning, stewardship, and organizational impact. Donor Cultivation, Stewardship & Engagement • Maintain & build strong, ongoing relationships with donors through personalized cultivation and stewardship strategies to ensure high donor retention and appreciation., • Support a portfolio of 100–250 mid-level donors (gifts ranging from $250–$2,500), including tracking touchpoints, ensuring timely follow-ups, and identifying upgrade opportunities., • Collaborate with the Director of Development to identify donors with major gift potential and coordinate cultivation strategies., • Execute donor recognition activities, including thank-you letters, public recognition, naming opportunities, and impact reports., • Assist in identifying and cultivating planned giving prospects to help build long-term sustainability. Communications & Content Creation • Manage department email communications using platforms such as Constant Contact & Raiser’s Edge; design, execute, and analyze email campaigns., • Create compelling fundraising content for appeals, newsletters, social media, and stewardship materials., • Support production of development letters, reports, and documents (e.g., mail merges, labels, spreadsheets). Fundraising Campaigns & Events • Plan, manage, and execute all annual fundraising campaigns, including direct mail, email, and digital giving efforts, in alignment with strategic goals., • Coordinate logistics for development events, including invitations, RSVP tracking, vendor communication, setup, and post-event follow-up., • Develop and manage sponsorship opportunities; cultivate relationships with local businesses for event partnerships and matching gifts. Administrative & Departmental Support • Respond to donor and community inquiries with professionalism and timely follow-up., • Maintain organized digital and physical development records., • Provide cross-functional support for development initiatives, events, and general office functions. Education and Experience • Bachelor’s degree required; relevant fields include communications, nonprofit management, marketing, or related discipline, • 1–3 years of experience in nonprofit development, fundraising operations, or donor engagement, • Proficiency with donor databases (Raiser’s Edge or similar CRM required), including queries, reports, and data segmentation, • Strong written and verbal communication skills; experience creating donor-centric content is a plus, • Proven ability to manage multiple priorities, meet deadlines, and pay close attention to detail, • Demonstrated experience planning and coordinating fundraising campaigns or events, • Strong analytical skills; ability to interpret data and apply insights to campaign strategies, • Familiarity with email marketing tools (e.g., Constant Contact) and Microsoft Office Suite, • Ability to work independently and collaboratively in a fast-paced, mission-driven environment, • Comfort interacting with donors and community members with professionalism and discretion Benefits • Health, Dental and Vision, • Retirement Plan, Life and Disability Insurance, • Employee Assistance Program, • Free membership to our Fitness and Aquatics Center

Job Description Position:Manufacturing/Production Engineer Reports to:Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: Manage engineering and project management effort for the company. This includes scheduling and completing engineering tasks on time and within budget. Administer Engineering document control. Supervise, mentor and train subordinates. Communicate with customers and production to ensure conforming product. Plan and allocate jobs. Resolve conflicts to meet deadlines. Minimum Qualifications: • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Proven record of strong leadership and motivational skills coupled with sound decision making capabilities, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word and Excel, • Strong knowledge of best practices, methods and techniques pertaining to building, facilities and equipment maintenance and repair, • A minimum of five years relevant experience, • Degree in Mechanical Engineering or another related field required Supervisory Specific Duties: • Voice all concerns while working with production staff, Quality Assurance, Engineering and Operations any and all current or potential problems affecting production., • Review all new project release packages to verify that customers’ specifications are achievable., • Participate in new product launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures., • Recommend continuous improvement actions for improving work processes. Departmental Specific Duties: • Quoting/Cost Estimating including; developing a Bill of Materials (BOM) for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Responsible for developing the manufacturing process for all parts. Assist operators with questions and provide technical advice., • Work with Production to improve efficiency on new and existing jobs, • Drive process improvements to generate cost reduction ideas., • Monitor actual job cost vs quoted job cost, • Help write the process sheets (travelers) for each job, • Analyze and improve processes for time/cost efficiencies, • Establish and maintain “machine utilization status”, • Help to create new travelers and/or modify existing travelers as per post program evaluation meetings, • Design machining, welding, inspection and assembly fixtures, • Help provide technical direction to operators as needed, • Supervise tools, fixtures, etc. if need, • Maintain engineering drawing and program files, • Must collaborate with customers to achieve desired results, • Provide engineering support to meet production schedules This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary. Benefits • 401 (k), • Health Insurance, • Paid time off, • Vision Insurance, • Dental Insurance, • Life Insurance

Job Description Title Optical Design Engineer Department Engineering Reports to Director of Engineering SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview: The Optical Design Engineer is responsible for the design, analysis, tolerancing, and support of precision optical systems from concept through production. Working closely with Engineering, Operations, Quality, and Program teams, this role develops optical solutions that meet customer requirements while ensuring designs are manufacturable, testable, and cost-effective. The successful candidate will apply strong optical design principles to create and optimize lens assemblies and optical systems, perform performance and tolerance analyses, and support the transition of designs into production. This position requires a practical understanding of how optical, mechanical, and manufacturing considerations interact to influence overall system performance. In addition to supporting new product development, this role serves as a technical resource for troubleshooting optical performance issues, improving existing products, and supporting optical metrology and validation activities. The ideal candidate combines strong theoretical optics knowledge with hands-on experience developing optical designs that have been successfully manufactured and deployed in real-world applications. Key Responsibilities: • Design and develop optical systems and lens assemblies for commercial, industrial, and government applications using industry-standard optical design software., • Perform optical analysis including imaging performance, tolerancing, sensitivity analysis, and system optimization., • Develop manufacturable optical designs that balance performance, cost, producibility, and schedule requirements., • Collaborate with engineering, operations, quality, and supply chain teams to ensure successful transition of designs from development into production., • Create, review, and approve engineering documentation including optical prescriptions, specifications, drawings, and design reports., • Support troubleshooting and root cause investigations related to optical system performance, assembly challenges, manufacturing variation, and test results., • Develop and execute optical verification and validation plans to confirm compliance with performance requirements., • Support optical metrology activities including lens characterization, alignment verification, and performance testing., • Conduct stray light analysis and support mitigation efforts using established optical engineering best practices., • Utilize Zemax Optic Studio and other analysis tools to model, evaluate, and improve optical system performance., • Develop scripts, automation tools, and analytical methods that improve design efficiency, tolerancing workflows, and engineering productivity., • Serve as a technical resource to manufacturing, quality, and engineering teams throughout product lifecycles. Required Skills & Qualifications: • Bachelor's degree in Optics, Optical Engineering, Physics, or a closely related discipline required; Master's degree preferred., • Minimum 5 years of professional experience designing optical systems and lens assemblies within a commercial, industrial, defense, aerospace, medical device, or precision manufacturing environment., • Proficiency with Zemax Optic Studio for optical design, analysis, tolerancing, and optimization., • Demonstrated experience performing optical analysis, tolerancing, sensitivity studies, and performance optimization., • Solid understanding of optical performance metrics including MTF, distortion, illumination, image quality, and system tolerancing., • Experience designing lens systems or optical assemblies that have progressed beyond academic projects into prototype, production, or commercial applications., • Ability to review and interpret engineering drawings, specifications, and technical requirements while ensuring designs are manufacturable, testable, and cost-effective., • Strong analytical, troubleshooting, and problem-solving skills with the ability to diagnose optical performance issues and support root-cause investigations., • Effective communication skills and the ability to collaborate across engineering, quality, and operations teams., • Proficiency with Microsoft Excel and other engineering analysis tools; experience developing scripts, macros, or automation tools to improve design and analysis workflows is highly desirable., • Experience with CODE V, FRED, TRIOPTICS, Optikos, or similar optical design, analysis, and metrology systems is highly desirable., • Familiarity with optical assembly, alignment, manufacturing processes, and production support activities is beneficial., • Experience supporting visible, SWIR, MWIR, or LWIR optical systems is a plus., • Practical understanding of optical-mechanical integration and the impact of manufacturing variation on optical performance., • Electro-Optical Systems Engineering background is highly beneficial. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Work Requirements & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and communicate., • The job may involve prolonged periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday - Friday, 7am - 3:30pm

Job Description Job Summary: The Coating Technician 1 is responsible for the safe and efficient operation of the coating equipment within the Coating Department. This role involves executing production-grade coating processes and adhering to quality work instructions. The technician will focus on maintaining productivity in the department, overseeing general maintenance, and managing supplies inventory. Collaboration with the Coating Manager and Assemblies Department is essential to ensure timely delivery of high-quality coated parts. Essential Duties and Responsibilities: • Champion of excellence in optical coating production., • Maintains established process parameters to ensure that quality parts are being produced., • Assists Coating Manager is maintaining production supplies inventory., • Ensures timely delivery of quality coated items., • Completes preventative maintenance procedures and cleaning processes, making sure these activities occur on schedule or as needed., • Capable of performing general maintenance in coating; full chamber cleanings, cryo-pump regeneration, emitter rebuilding and general shop upkeep., • Trains and guides other staff members on proper operation of coating equipment, execution of coating procedures and document control., • Identifies quality issues and reports to Coating Manager and/or Quality department, as needed., • Identifies potential safety issues and reports to management. Additional Responsibilities: • Raises individual performance to a level that results in proactive responses to problem solving and continuous improvement., • Works well in a team environment., • Maintains a clean and orderly work environment., • Performs other related duties and assignments as required, depending on candidate skill set and on an as-needed basis to support evolving business needs.Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 40 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists The noise level in the work environment may range from moderate. Education, Skills and Experience: • Minimum 2 years experience in optical coating equipment operation., • Basic analytical skills, including basic statistical analysis., • Basic computer skills, including Microsoft Office and Windows operating systems., • Good oral and written communication skills., • Strong time management skills., • Work independently with minimal supervision.

Job Description About Arnold Magnetic Technologies Arnold Magnetic Technologies is a global leader in high-performance permanent magnets, precision magnetic assemblies, and engineered materials used in mission-critical applications across aerospace, defense, energy, medical, and industrial markets. For more than a century, Arnold has been trusted to deliver magnetic solutions where failure is not an option. We Build the Hard Stuff – complex, high-tolerance products that power advanced technologies around the world. We’re Built Different through our relentless commitment to quality, innovation, and operational excellence. And We Build Around You – our employees – by creating a workplace where people feel supported, respected, and empowered to do their best work. At Arnold, operational excellence is achieved through the strength of our teams, the pride in craftsmanship, and a culture that values safety, collaboration, and continuous learning. The Rochester plant plays a critical role in this mission, producing high-precision magnetics and assemblies that support both legacy programs and emerging technologies. The B Shift Production Supervisor ensures that this facility delivers throughput, efficiency, and performance our customers depend on. Job purpose The B Shift Production Supervisor drives high throughput, efficient, and reliable production performance across the Rochester manufacturing plant. This role is accountable for delivering operational excellence through disciplined execution, continuous improvement, and strong leadership of production employees to meet internal production requirements and external customer commitments. Duties and responsibilities Operational Leadership • Lead daily production operations to achieve high throughput and consistent performance across all manufacturing processes while maintaining safety, quality and on-time delivery., • Support completion of production orders in coordination with A Shift Production Supervisor and Site leader., • Convert production plans into clear priorities that meet internal assembly schedules and customer delivery requirements., • Allocate labor, equipment, and materials effectively to reduce bottlenecks and improve overall equipment effectiveness., • Track production performance, analyze delays or inefficiencies, and implement timely corrective actions., • Lead and sustain initiatives such as Standard Work, 5S, Kanban, and visual management., • Reduce lead times, eliminate waste, improve facility organization, and strengthen operational stability. Safety and Quality • Champions a proactive safety culture, enforcing safe work practices, reporting incidents and partnering with EHS to resolve hazards and strengthen compliance., • Partner with quality team in conducting root cause analysis for quality failures and implement corrective actions. Aid in quality audits. People Leadership and Culture • Hire, train, coach, motivate, and develop production team., • Set expectations for work performance and behaviors. Closely manage performance and partner with Human Resources for any progressive discipline., • Foster a positive, accountable, engaged, and collaborative environment that encourages problem-solving and idea generation. Measures of Success Responsibility Measure of Success Safety Safety observation performance, reporting of near miss incidents, reduction in recordable and lost time injuries Operational Efficiency OTD, lead time, machine utilization, labor efficiency, scrap reduction Team development. Skill versatility, cross-training depth, performance improvement, succession planning Quality RMAs, scrap reduction, first-pass yield Qualifications • Bachelor’s degree in operations, business, industrial engineering or related field preferred., • 5+ years supervisory experience in a manufacturing environment, • Experience in lean manufacturing environment preferred, • Experience operating within AS9100 (preferred) or ISO systems., • Ability to travel up to 5% for site or customer visits, • Strong computer skills including proficiency with MS Word, Excel and PowerPoint. Working conditions • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. All required safety precautions provided., • Could work in areas with excessive noise with ear protection available., • Will work in both a manufacturing environment as well as an office environment Physical requirements • Could require intermittent and long periods of sitting and/or standing., • Periodic lifting of materials and files up to 40 pounds. Direct reports • B shift manufacturing team #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran

Job DescriptionDescription: About Us G&H is a world leader in optical design, testing, and manufacturing. As experts in the technology of light, G&H partners with customers to deliver advanced optical systems, assemblies, and components for demanding applications. Headquartered in Ilminster, Somerset, UK, with primary operations across the United States and Europe, G&H is recognized for its expertise in acousto-optic, electro-optic, crystal-optic, fiber optic, and precision optic technologies. We serve leading OEMs in aerospace & defense, life sciences, and industrial markets, with a legacy of innovation spanning more than 75 years. The Role Located in Rochester, NY, G&H | GS Optics has been a leader in precision polymer optics since 1916. The site specializes in the custom design and manufacture of high-performance optical components used in biomedical instrumentation, healthcare diagnostics, machine vision, analytical instruments, aerospace, defense, and night-vision applications. In addition to highly automated injection molding capabilities, the facility offers advanced in-house expertise in diamond turning, optical prototyping, thin-film coatings, and precision optical assembly. We are seeking an experienced Lead Diamond Turning Technician to support the production of high-precision optical components while serving as a technical resource within the Diamond Turning department. This role is responsible for machine setup, process optimization, troubleshooting, inspection, and continuous improvement activities to ensure the highest levels of quality, efficiency, and customer satisfaction. The successful candidate will possess deep technical expertise in diamond turning processes and will play a key role in supporting operational excellence, training, and problem-solving within the department. Key Responsibilities As a Lead Diamond Turning Technician, you will: • Set up, operate, and optimize Precitech 3-axis and 4-axis diamond turning machines to manufacture precision optical components and tooling., • Produce spherical, aspheric, and freeform optical surfaces, as well as nickel-plated mold inserts, to exact customer specifications., • Support process development, troubleshooting, and continuous improvement initiatives to improve yield, quality, throughput, and machine utilization., • Serve as a technical resource and subject matter expert for diamond turning operations., • Assist in training and mentoring technicians and operators on equipment, processes, and best practices., • Interpret engineering drawings, process documentation, and technical specifications., • Utilize DiffSys software and machine programming tools to support production and process optimization., • Perform and verify precision measurements using interferometers, profilometers, white-light interferometers, and other metrology equipment., • Conduct visual inspections in accordance with MIL-PRF-13830B, ISO 10110, and internal quality standards., • Maintain accurate production records, process documentation, and quality data., • Ensure compliance with all safety, quality, and environmental requirements., • Maintain a clean, organized, and efficient work environment., • Support production schedules and business requirements, including overtime when necessary. Qualifications Required • Minimum of 3 years of hands-on diamond turning experience in a precision manufacturing environment., • Experience setting up and operating Precitech 3-axis and 4-axis diamond turning equipment., • Experience with DiffSys software and machine programming., • Strong metrology experience using interferometers, profilometers, white-light interferometers, and related measurement systems., • Experience manufacturing precision optical components., • Working knowledge of MIL-PRF-13830B and ISO 10110 standards., • Strong troubleshooting and problem-solving skills., • Ability to read and interpret engineering drawings, specifications, and work instructions., • Excellent attention to detail and commitment to quality., • Strong organizational, communication, and computer skills., • Ability to work independently and effectively manage multiple priorities.Qualifications Preferred, • Experience manufacturing freeform optics and complex optical geometries., • Experience supporting process development and continuous improvement initiatives., • Prior experience training or mentoring technicians., • Familiarity with mold insert manufacturing and optical tooling applications. Why Join G&H? At G&H, you'll work alongside industry experts developing cutting-edge optical technologies used in some of the world's most demanding applications. We offer a collaborative environment where innovation, craftsmanship, and continuous improvement are highly valued. Additional Notes This job description is intended to describe the general nature and level of work performed. It is not intended to be an exhaustive list of all responsibilities, duties, or qualifications required for the role. Employees may be assigned additional responsibilities to meet business needs. G&H is an Equal Opportunity Employer and is committed to fostering a diverse and inclusive workplace. Employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. Employment with G&H may be subject to U.S. export control regulations, including ITAR and EAR requirements. Candidates may be required to provide information necessary to determine compliance with applicable export control regulations. Requirements:

Job DescriptionDescription: ABOUT US G&H is a world leader in optical design, testing, and manufacturing. As experts in the technology of light, G&H partners with customers to deliver advanced optical systems, assemblies, and components for demanding applications. Headquartered in Ilminster, Somerset (UK), with primary operations across the U.S. and Europe, G&H is recognized for its expertise across acousto-optic, electro-optic, crystal-optic, fiber optic, and precision optic technologies. We serve leading OEMs in aerospace & defense, life sciences, and industrial markets, with a legacy of innovation spanning more than 75 years. THE ROLE Located in Rochester, NY and founded in 1916, G&H | GS Optics specializes in the custom design and manufacture of precision polymer optics for use in the biomedical, healthcare diagnostics, machine vision and analytical instrument markets, as well as military and civilian night-vision and visible-range sighting applications. In addition to the highly automated injection molding process, it has well established in-house capabilities to provide custom designed diamond turned and injection molded prototypes, thin film anti reflective and reflective coatings and integrated optical assembly solutions. The Quality Technician is responsible for providing support and qualifying in-process production parts for manufacture following existing test protocols and procedures. This role works closely with production process technicians to start up and maintain a process for producing parts with consistent and acceptable yields. Required to perform process compliance audits to ensure conformance to company procedures. JOB RESPONSIBILITIES • Perform dimensional measurements with manual/hand gauges (calipers, micrometers, etc) and computer-controlled gauges (Mitutoyo touch CMM, Zeiss scanning CMM, OGP multisensory CMM, Zeiss profilometer), • Perform optical non-contact inspection using interferometer and optical bench metrology methods, • Perform visual inspection of optical parts per MIL PRF-13830B to identify nonconformance according to documented parameters, • Notify production personnel of inspection results, • Identify and report systematic and preventable nonconformance occurrences to maximize yields, • Perform final inspection requirements both in-process (where applicable) and as a standalone operation, • Reject defective product and document through Discrepant Material Report (DMR) process, • Document inspection results electronically into Excel based inspection files, • Summarize daily activities and inspection statis via email or daily journal, • Apply flash coating to sample parts using a vacuum coating chamber, • Work with production to actively and urgently find continuous improvement opportunities and work as a team to suggest machine and process changes, • Perform process compliance audits QUALIFICATIONS & EXPERIENCE • High School Diploma or equivalent experience, • Associates degree in a technical discipline preferred, • Optical manufacturing and/or inspection, • Injection molding, • Medical device manufacture or inspection in an FDA registered and/or ISO 13485 certified facility, • Six Sigma and/or lean manufacturing, • Optical inspection equipment (interferometer, OGP Smart Scope), • Mechanical measurement equipment (calibers, CMM, profilometer, etc) KEY ATTRIBUTES • Strong leadership and team development skills, with the ability to coach, delegate, and drive accountability, • Strong communication and written skills, • Safety and quality focused mindset, consistently embedding best practices into processes and team culture, • Operationally and technically proficient, with the ability to apply expertise to achieve performance goals Please note that this role will be a 2nd Shift position ADDITIONAL NOTES This job description is intended to outline the general nature and level of work performed and is not exhaustive. Employees are expected to take on additional responsibilities as needed to support business objectives. The Company is committed to providing equal employment opportunities for all employees and applicants for employment. The Company does not discriminate in employment opportunity or practices on the grounds of gender, race, religion or belief, age, disability, sexual orientation, gender identity, protected veteran status, or any other characteristic protected by applicable law. Employment with G&H may be subject to U.S. export control regulations (ITAR/EAR). Candidates may be required to provide information to ensure compliance with these regulations. Requirements:

Job Description Title Mold Maker Department Diamond Turning Reports to Diamond Turning Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview The Mold Maker will be responsible for the fabrication, modification, repair, maintenance, and continuous improvement of precision molds, mold components, tooling, and fixtures used in the manufacturing of precision optical injection molded products. This role serves as a technical expert within our Diamond Turning group, supporting both production and development activities through precision machining, troubleshooting, process improvement, and tooling design. The ideal candidate possesses a strong foundation in mold making and toolmaking principles, exceptional machining skills, and the ability to independently diagnose and resolve complex tooling issues. This individual will work closely with Engineering, Operations, Quality, and Plastic Injection Molding personnel to ensure molds and tooling consistently meet performance, quality, and production requirements while supporting the development of new products and processes. Key Responsibilities • Diagnose, troubleshoot, repair, modify, and maintain precision molds, mold components, and tooling used in optical injection molding operations., • Evaluate mold and tooling performance, identify root causes of issues, and implement corrective actions to improve quality, reliability, and productivity., • Fabricate, modify, and fit precision mold components, inserts, fixtures, and tooling to exact specifications., • Support mold changeovers, tooling validation, and production startup activities as required., • Collaborate with Engineering and Manufacturing teams to evaluate tooling designs for manufacturability, functionality, and long-term performance., • Interpret engineering drawings, GD&T requirements, sketches, and work instructions to manufacture and modify tooling components., • Design, fabricate, and maintain fixtures and inspection aids to support manufacturing operations., • Perform precision machining operations utilizing manual mills, lathes, grinders, and other conventional machine shop equipment., • Support diamond turning operations and develop an understanding of processes associated with the fabrication of optical mold components and mold pins., • Assist with process development, tooling improvements, and continuous improvement initiatives focused on quality, throughput, and cost reduction., • Estimate machining times, tooling requirements, and manufacturing approaches for tooling-related projects., • Lead or assist in equipment, tooling, and fixture setup activities within the department., • Document tooling modifications, repairs, maintenance activities, and process improvements as required., • Serve as a technical resource and mentor for less experienced personnel within the department., • Perform other duties as assigned. Required Skills & Qualifications • High School Diploma or GED required. Associate degree, vocational training, apprenticeship, or formal toolmaking education preferred., • Minimum 10 years of experience as a Mold maker, Toolmaker, Precision Machinist, or similar skilled trade within a manufacturing environment., • Demonstrated experience troubleshooting, repairing, modifying, and maintaining precision molds and tooling., • Strong knowledge of machine shop practices, machining methods, tooling design, and precision manufacturing techniques., • Experience operating manual machining equipment, including mills, lathes, surface grinders, and related machine shop equipment., • Ability to read and interpret engineering drawings, blueprints, geometric dimensioning and tolerancing (GD&T), and technical specifications., • Strong mechanical aptitude and ability to diagnose complex tooling and manufacturing issues., • Experience designing and fabricating fixtures and tooling components., • Proficiency with precision measurement equipment and inspection techniques., • Strong problem-solving, analytical, and troubleshooting skills., • Ability to manage multiple priorities and work independently with minimal supervision., • Effective communication skills and ability to collaborate across Engineering, Manufacturing, Quality, and Production teams., • Proficiency with Microsoft Office and standard computer applications., • Experience with SolidWorks, Mastercam, CAMWorks, or similar CAD/CAM software is preferred., • Experience supporting optical manufacturing, precision molding, diamond turning, medical device manufacturing, aerospace, or other high-precision manufacturing environments is highly desirable. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Work Environment & Physical Demands • Work is performed within a manufacturing, tooling, and machine shop environment supporting precision optical manufacturing operations., • Regular interaction with molds, tooling, machining equipment, diamond turning equipment, and precision measurement instruments., • Requires prolonged periods of standing, walking, bending, reaching, and working at machines, benches, and inspection stations., • Frequent use of hand tools, power tools, and precision measuring equipment to fabricate, repair, inspect, and maintain tooling and mold components., • Ability to safely lift, carry, push, and pull tooling, fixtures, molds, and materials weighing up to 50 pounds., • Requires strong manual dexterity and hand-eye coordination to perform precision machining, assembly, fitting, and inspection tasks., • Visual acuity is required to inspect tooling, verify dimensions, identify defects, and perform detailed precision work., • Must be comfortable working around machining equipment, rotating machinery, cutting tools, coolants, and other manufacturing equipment while following all safety procedures., • May occasionally work with oils, lubricants, cleaning solutions, and other materials commonly found within a machine shop environment., • Ability to maintain concentration and attention to detail while performing complex machining, troubleshooting, and tooling-related activities., • Occasional overtime, weekend work, or schedule flexibility may be required to support production schedules, tooling priorities, and department objectives. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday - Friday 7am - 3:30pm

Job Description Title Senior Manufacturing Engineer Department Manufacturing Engineering Reports to Director of Production Engineering SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview: The Senior Manufacturing Engineer provides technical leadership and manufacturing support for various precision optics operations, with responsibility for process development, production support, and continuous improvement across multiple manufacturing lines. This role works closely with production, quality, and engineering teams to improve process stability, reduce waste, increase throughput, and support the successful transition of products from prototype through volume production. The position plays a key role in developing standardized manufacturing methods, troubleshooting complex production issues, and implementing process improvements that enhance quality, repeatability, and operational efficiency. Success in this role requires strong technical judgment, hands-on problem-solving ability, and experience working within a precision manufacturing environment. Key Responsibilities: • Provide technical leadership and manufacturing support across multiple precision optics production lines., • Develop, implement, and maintain standardized manufacturing processes, work instructions, and process documentation to support consistent and repeatable production., • Lead troubleshooting and root-cause analysis efforts related to production and process issues impacting quality, yield, or throughput, • Support the transition of products from prototype and engineering development into stable volume production environments., • Design, develop, and implement tooling, fixtures, and process improvements to increase efficiency, improve repeatability, and reduce scrap and cycle time., • Analyze production data and process metrics to identify trends, improve process capability, and support data-driven manufacturing decisions., • Partner closely with production, quality, and engineering teams to resolve manufacturing challenges and improve operational performance., • Lead or support manufacturing projects and capital improvement initiatives, including scope definition, implementation, validation, and follow-through., • Train and provide technical guidance to production personnel, technicians, and junior engineering staff as needed., • Ensure manufacturing processes comply with internal quality standards, customer requirements, and applicable regulatory or documentation requirements. Required Qualifications: • Bachelor’s degree in mechanical, Manufacturing, Industrial, Optical, Aerospace Engineering, or a related engineering discipline., • Minimum 10 years of manufacturing engineering experience within a precision manufacturing environment, preferably supporting optical assembly or other high-precision production processes., • Strong understanding of manufacturing process development, process control, troubleshooting, and continuous improvement methodologies., • Experience supporting production environments, including root-cause investigation, yield improvement, cycle time reduction, and process optimization., • Proficiency interpreting engineering drawings, specifications, and Geometric Dimensioning & Tolerancing (GD&T) requirements., • Hands-on experience with fixture/tooling development and manufacturing process documentation., • Experience with 3D CAD modeling software; SolidWorks preferred., • Strong analytical capability with experience using production data and process metrics to support decision-making and process improvement., • Working knowledge of Lean Manufacturing principles; Six Sigma experience or certification is beneficial., • Experience working within ISO-regulated manufacturing environments; familiarity with ITAR-controlled manufacturing environments is a plus., • Experience supporting prototype-to-production transitions and manufacturing scale-up activities preferred. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Work Environment & Physical Demands: • Works in a precision manufacturing environment supporting optical assembly and production operations, with regular time spent on the manufacturing floor and in engineering or office settings., • Frequent interaction with production personnel, manufacturing equipment, tooling, and assembly processes in support of troubleshooting, process development, and continuous improvement activities., • Requires prolonged periods of standing, walking, and moving throughout production areas, with occasional sitting for engineering, documentation, and project-related work., • Regular use of hands for computer work, documentation, handling components, tooling, fixtures, and measurement equipment., • Requires visual acuity for reviewing technical documentation, inspecting components and assemblies, and supporting process verification activities., • Exposure to typical manufacturing conditions, including moving mechanical equipment, moderate noise levels, airborne particles, cleaning agents, adhesives, oils, and solvents., • Required use of personal protective equipment (PPE), including safety glasses and cleanroom or controlled-environment garments, as required by specific production areas., • Occasional lifting or movement of materials, tooling, fixtures, or equipment, typically up to 50 pounds., • May require schedule flexibility or extended hours to support production priorities, troubleshooting activities, or project implementation deadlines. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. This position is scheduled for Monday through Friday, 7:00 AM – 3:30 PM. As a senior-level role supporting production operations, occasional flexibility outside normal business hours may be required to support manufacturing priorities, project implementation, troubleshooting activities, or critical production needs.

Job DescriptionDescription: Summary: The CNC Machinist is responsible for the safe operation and set up of a wide variety of Computerized Numerical Control Machining Centers (CNC) or other production machines using programs and tooling that have been previously used to manufacture a product and is capable of doing this with little supervision. • Must work with Management to debug and optimize manufacturing processes for jobs or machines which they are responsible., • Must demonstrate a very high level of competency with all types of metal working equipment, both manual and CNC., • Must demonstrate the ability to debug machining processes and communicate those processes for manufacturing., • Must be able to diagnose process problems and determine the cause of the problem., • Must be able to implement corrective action to prevent reoccurrence of problems., • Must be aware of the budget and delivery requirements for work assigned to them and report to management any difficulties that would cause the cost of the work to exceed budget or miss a scheduled delivery., • Must have a thorough understanding of safe operation of metal working equipment, including but not limited to starting and stopping the machining cycle, interrupting the machine cycle, performing offsets to tool length and diameter and restarting the machining cycle., • Must have a thorough knowledge of CNC program code and be able to document and perform edits of the code to enhance machining processes., • Installs machining fixtures and tooling using Tool Sheet and Setup instructions with no supervision., • Orients fixtures and tools to machine coordinate systems, inputs machine, fixture and tool offsets., • Loads appropriate CNC program into machine control., • Loads material into holding fixtures, following verbal and/or written instructions., • Produces “first piece” from setup while observing machining cycle to prevent damage to work piece, tooling, machine or injury to operator., • Must be able to read, understand and interpret blueprints and specifications, including GD&T., • Observes and listens to machine operation to detect malfunctions, such as worn or damaged cutting tools., • Performs a variety of inspection and gaging operations to insure maintenance of quality standards and specifications and have the ability to record the results of these inspections., • Notifies supervisor of discrepancies., • Must be able to train CNC Operators in the safe operation of the machines that they have set up., • Cleans machine, tooling, and parts as instructed., • Performs daily preventative machine maintenance as instructed., • Other duties as assigned. Requirements: Education • High school diploma or general education degree (GED) required., • 5+ years related experience and/or training; or equivalent combination of education and experience required. Skills: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, mechanical drawings and specifications., • Ability to write routine reports and correspondence., • Ability to speak effectively before groups of customers or employees., • Ability to add and subtract four-digit numbers and to multiply and divide., • Ability to perform these operations using units of measurement, volume, and distance. Basic understanding of Geometry and Trigonometry., • Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form., • Ability to deal with problems involving several variables in situations requiring a high level of judgment and reasoning., • Microsoft Office Suite, • Epicor Vista™ integrated manufacturing and accounting solution, • Adobe Acrobat, • Windows Operating Systems, • Internet Explorer or equivalent, • Must be able to read, understand and interpret mechanical drawings., • Working knowledge of “G” & “M” Codes is required., • Demonstrate a working understanding of CNC Machine Coordinate Systems., • Demonstrate competency on a wide variety of machines and controls.

Job DescriptionJob purpose: Responsibilities include processes typical to product verification in a machining and assembly environment; measurement of product against design specifications provided on inspection plans and product drawing information using sophisticated and basic measurement devices. Verifying received components meet requirements prior to use. Supporting the calibration process. Assisting Quality Engineering establish inspection plans. Documenting and electronically storing quality records in appropriate network locations. Basic maintenance of inspection equipment. Assisting with the non-conforming material process. Supporting manufacturing personnel with their understanding of measurement techniques. Other items as required. Duties and responsibilities • A skilled position, the Quality Technician is expected to understand the following after investing effort in the role. Specific knowledge will be trained;, • Perform Quality Technician related tasks in a machining and assembly environment in support of meeting the company quality objectives and Manufacturing Operations delivery commitments., • Inspect incoming materials, manufactured components, and finished goods for conformance to internal and/or Customer requirements following AQL and some 100% inspection, utilizing SPC tools. Generation of Discrepant Material Reports when necessary., • Understand flow-down requirements from Customers, how they are communicated to our outside suppliers, how conformity to those requirements are verified during Receiving Inspection, and how conformity to requirements are verified on processes performed in house., • Interface with Purchasing, Engineering and Suppliers in support of discrepant material resolution., • Generate and store computer-based quality related records including the archiving of component and material certifications, certificates of conformance, and First Article Inspection Reports., • Assist with the preparation of First Article Inspection Reports per AS9102. Understand or learn understanding of the Production Part Approval Process (PPAP). • Provide shop floor support to resolve daily quality related product and process issues. Mentor and train manufacturing personnel in proper measurement techniques., • Review quality documentation to ensure product conformance. Recommend improvement and correction to Inspection Plans for supplied and manufactured materials to ensure compliance to Customer drawing and PO requirements., • Control limited life materials such as adhesives to ensure compliance with expiration dates., • Operate CMM and Keyence measurement systems. Train other QA inspectors and technicians in their operation. Attend training for programming these devices., • Support conformance to the Quality Management System with respect to quality inspection needs., • Support Manufacturing Operations delivery commitments to Customers, understanding production timing and prioritization sequencing of work tasks. Strive to support Operations while assuring conformity to product requirements., • Maintain inspection equipment calibrations utilizing calibration records software. Schedule outside services calibration for items not calibrated in house. Ensure verification equipment is working properly. • Obtain Designated Quality Representative Certification, acting on behalf of the certifying Customer as their agent when certifying their product., • Other duties as assigned. Qualifications • Associate degree in technical field or equivalent technical work experience in a manufacturing environment., • 2-5 years of experience manufacturing environment that includes machining and assembly., • Knowledge of computer software programs including Microsoft Office (Word/ Excel / PowerPoint), • Ability to read and understand product drawings that include GD&T requirements., • Experience with sophisticated quality inspection equipment such as Coordinate Measurement Machines, Keyence, laser scanners, and experience with pin gauges, micrometers, calipers, etc., • Experience with layout / surface plate inspection techniques., • Knowledge of statistical sampling plans., • Ability to communicate clearly and effectively, both orally and in writing. Ability to interact well with all levels of personnel throughout the organization as well as suppliers and customers., • Experience working in a regulated industry with certification to AS9100 or ISO9000., • Ability to organize thoughts and prioritize work tasks based on the needs of the operation., • Be able to manage multiple tasks and meet multiple deadlines simultaneously and have a strong sense of urgency., • Be self-motivated, focused, and detail oriented with a positive attitude. Working conditions, • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning to a steady temperature., • Could work in areas with noise. NOTE: Ear protection available. Physical requirements, • Could require intermittent and long periods of sitting and/or standing., • Some work may be repetitive., • Periodic lifting of materials not to exceed 50 pounds. Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran #ROC