Travel companies jobs in PlymouthCreate job alerts

BAM UK & Ireland's Infrastructure Segment are currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an experienced Site Engineer to assist the Engineer in managing the technical compliance of the project to the design specification in order to fulfil the assigned project (or section) safely, on time and to the required quality. Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and have been a UK residence for the last 5 years can be considered for this role.Making Possible As a Site Engineer, you will be responsible for the following:Assist in the preparation of as-built drawings.Assist in establishing effective systems to record work completed updating the Project Quality Plan accordingly.To assist in managing systems to enable the progress of work to be reviewed against time, quality, dimensions, and quantity.Assist in the recording and testing of workmanship and materials, i.e., drainage, concrete, piling, brickwork etc.Assist in providing engineering support to ensure technical problems are overcome and technical queries are answered.Responsible for setting out works constructed within allowable tolerances.Regularly checking the setting out points and benchmarks and checking that all setting out instruments and measuring equipment are delivered to site with a calibration certificate and recorded accordingly.Completing Daily Diaries.Ensures workforce understand setting out information has been identified as suitable for the type of work being carried out.Assist in the preparation of sketches for distribution on site, ensuring clear communication channels are in place for effective understanding.To be aware of the provisions of the Kier Safety, Health, and Environmental Management System and to assist in its implementation to ensure a safe working environment.Responsible for providing and maintaining setting out and dimensional control, to ensure accurate construction of the work.Record instructions.Maintain drawing register.What do you bring to the role? A degree qualification in civil engineering or equivalent is desirable one or more of: BSc, BA, BEng, Meng, Eng, Tech, MICE, TIStructE, LCIBSE, LCIBSEEng Tech, Completion of Higher Apprenticeship.May be working towards Chartership/Incorporation with IStructE, ICE or other appropriate professional body.Familiar in Leica Survey equipment (GPS, Total Station, Optical & digital levels) for Setting Out & SurveyExperience in similar role.Awareness of commercial processes.Familiar with Quality Management System and familiar in writing RAMS.Desirable:TWS or TWCFirst Aid at WorkSSSTSDeveloping ITPsExperience in Groundworks, Earthworks & Reinforced ConcreteNuclear experienceWhats in it for you? Competitive salaryA wide range of family-friendly policiesCompany car/car allowance/travel allowance8 % matched pension contributionsPrivate healthcareLife assurance26 days holiday2 wellbeing days1 volunteering dayPersonal and professional developmentAbout BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at anytime you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you.TPBN1_UKTJ

Building a sustainable tomorrow KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland - BAM UK & Ireland's infrastructure segment is currently delivering the redevelopment project at a Royal Navy site located in Plymouth and are seeking an experienced Geotechnical or Section Geotechnical Engineer to assist the Engineer in managing the technical compliance of the project to the design specification to fulfil the assigned project (or section) safely, on time and to the required quality.Due to the sensitive nature of the site, BPSS security clearance is required. Please note that this process can take up to 8 weeks.Eligibility criteria: Candidates must hold a passport from a NATO or MISWG member country and have resided in the UK for the past 5 years.Making Possible As Geotechnical /Section Geotechnical Engineer, you will be responsible for the following:Maintain open lines of communication with the Geotechnical team regarding the progress of the project and relevant developmentsWriting and maintaining of HSQE documentationSupervision & management of the safe, efficient delivery of geotechnical works to an excellent technical standardDevelop and maintain a strong relationship with the Client, the supply chain and third partiesMaintain high levels of personal safety and environmental standards, implementing safe systems of work on siteAccurate record keeping for site activities, and short term forecasting of resources on a project basisAwareness of project and business goals and able to relay these to the project team to increase workforce engagement with businessWhat do you bring to the role? Required Experience in delivering geotechnical works, competence at management and supervision of project teams, documentation writing, communication skills both written and verbal at all levelsPreferred RoGEP, Professional Membership, CSCS card, SMSTS, First Aid at Work, PTSWhats in it for you? Competitive salaryA wide range of family-friendly policiesCompany car/car allowance/travel allowance8 % matched pension contributionsPrivate healthcareLife assurance26 days holiday2 wellbeing days1 volunteering dayPersonal and professional developmentAbout BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.TPBN1_UKTJ

Building a sustainable tomorrow KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland. We are currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an experienced Quality Engineer.A Quality Engineer focuses on implementing quality assurance and quality control processes at the operational level. They work closely with production or project teams to ensure products or services meet defined quality standards.Due to the sensitive nature of the site, BPSS security clearance is required. Please note that this process can take up to 8 weeks. Candidates must hold a passport from a NATO or MISWG member country and have resided in the UK for the past 5 years.Making Possible In this role, you will be working in a live MOD facility. Your day-to-day tasks will include:Develop and execute inspection and testing proceduresConduct root cause analysis and support problem-solving activitiesMonitor production or construction processes for quality complianceReview documentation and verify that materials/products meet specificationsSupport audits and quality system implementationsAssist in corrective and preventive action (CAPA) processesCollect and analyse quality data to identify trends and improvementsThis profile is not exhaustive. From time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be given.What do you bring to the role? Professionally qualified operator and/or GraduateQuality related qualifications and Industry experience ie ISOExperience of similar role, preferred in relevant sector (ie Nuclear and Defence)CSCS - Green labourerStrong understanding of quality principles, inspection methods, and testingFamiliarity with quality tools (e.g., FMEA, SPC, root cause analysis)Knowledge of relevant standards (ISO 9001, industry-specific)Basic statistical and data analysis skillsGood communication and problem-solving abilitiesWhats in it for you? Competitive salaryA wide range of family-friendly policiesCompany car/car allowance/travel allowance8 % matched pension contributionsPrivate healthcareLife assurance26 days holiday2 wellbeing days1 volunteering dayPersonal and professional developmentAbout BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.TPBN1_UKTJ

Job Title: IT Maintenance Engineer \n Location: Plymouth office and field based, supporting partner locations as required \n Salary: £32,000 to £35,000 per annum (depending on experience) \n Job Type: Full-time, Permanent \n Working Hours: 8.5 hours per day, 40 hours per week within our opening hours of 8am - 6pm with a 30-minute lunch. Monday to Friday with additional On Call and Overtime support available \n Who are we: \n Flotek Group is one of the fastest-growing Tech Companies in the UK, providing IT, Cybersecurity and Comms technology to small & medium businesses. With sales and support locations across the country, our ambitious growth is driven by our core values and fundamental principles. We deliver every product and service with expertise, passion, and heart. \n When you join Flotek Group you join our "Purple Army" and become part of a team driven by a set of values that guide our every interaction, both with each other and with our partners. We enjoy a collaborative, fast-paced working environment, where we can expect to learn to be exceptional, earn trust through actions and receive recognition when our work gets a "Wow!" \n About the Role: \n The IT Maintenance Engineer is a hybrid field-based and remote support role based from the Plymouth office, responsible for maintaining, supporting and improving partner technology environments. The role combines proactive maintenance, infrastructure support, end-user support and basic communications engineering. Travel across the south-west of England is required, with a company van provided for business use. \n Key Responsibilities: \n\n • Undertake scheduled maintenance visits to partner sites as required.\n, • Provide remote IT and communications support via phone, email and remote tools.\n, • Perform infrastructure health checks and preventative maintenance activities.\n, • Support Microsoft 365, Windows, networking and end-user technologies.\n, • Assist with VoIP, internet connectivity and telephony troubleshooting.\n, • Maintain accurate documentation and ticket updates within HaloPSA.\n, • Support project delivery, installations and technology refresh programs.\n, • Act as Flotek's on-site technical representative and trusted advisor.\n\n Travel Requirements: \n\n • Regular travel to partner locations as required, primarily from the Plymouth office base, using a company-provided van.\n, • Full driving license required.\n, • Company van provided for business travel.\n, • The van is to be used in line with Flotek company vehicle policies.\n, • Occasional overnight stays may be required.\n\n About you: \n Essential Skills & Experience: \n\n • 3+ years in MSP, Infrastructure, IT Support or Field Engineering.\n, • Strong Microsoft 365 administration and troubleshooting skills.\n, • Windows desktop and server support experience.\n, • Knowledge of Active Directory and Microsoft Entra ID.\n, • Networking fundamentals including switching, wireless, VLANs and firewalls.\n, • Excellent communications and documentation skills.\n\n Desirable Skills: \n\n • VoIP and hosted telephony experience.\n, • Experience with Gamma, CallSwicth, and Teams Voice or similar platforms.\n, • Ticketing system experience.\n, • Cyber security awareness and best-practice knowledge.\n\n Benefits: \n\n • Birthday day off.\n, • Additional day off for personal life milestones.\n, • "Give Back Day" for supporting a charity of your choice.\n, • Perkbox discounts.\n, • Company van provided for business use.\n, • Regular social events and team-building opportunities.\n, • Career growth pathways into senior communications or network engineering.\n\n Due to the nature of the role the company will not be able to offer sponsorship or relocation assistance so candidates must already reside in the UK. \n Please click the APPLY button to submit your CV for this role. \n Candidates with the experience or relevant job titles of; IT Field Engineer, Field Engineer, Network Support Engineer, 2nd Line Engineer, ICT Support Engineer, IT Engineer, Technical Support Engineer, may also be considered for this role.

Manufacturing EngineerAn excellent opportunity for a practical, hands-on engineering professional to support process improvement, Lean Manufacturing and operational efficiency across a busy manufacturing environment.If youve also worked in the following roles, wed also like to hear from you: Production Engineer, Process Engineer, Continuous Improvement Engineer, Lean Manufacturing Engineer, NPI Engineer, Manufacturing Process Engineer, Industrial Engineer, Project Engineer, Quality Engineer, Engineering TechnicianSALARY: Competitive + BenefitsLOCATION: Plymouth, Devon, South West England - inter-site travel will be required across five Plymouth sitesJOB TYPE: Full-Time, PermanentJOB OVERVIEWThis is an excellent opportunity for a Manufacturing Engineer to play a key role in improving productivity, reducing waste and supporting quality across manufacturing operations.As the Manufacturing Engineer, you will develop, improve and standardise manufacturing processes, support New Product Introduction and help deliver Continuous Improvement projects across the business.The Manufacturing Engineer will work closely with Production and cross-functional teams, using manufacturing data, Lean tools and structured problem-solving methods to improve efficiency, cost, delivery and operational performance.APPLY TODAYReady to make your next career move? Apply Now for our Recruitment Team to review.DUTIESYour duties as the Manufacturing Engineer include:Drive Continuous Improvement: Identify and eliminate waste to improve cost, quality, delivery and efficiency across manufacturing operationsSupport NPI Projects: Lead Continuous Improvement projects and support New Product Introduction activity across the businessAnalyse Manufacturing Data: Review manufacturing data and performance metrics to identify and implement process improvementsMaintain Process Documentation: Develop and maintain Standard Work, process maps and Bills of MaterialsOptimise Production Processes: Improve manufacturing processes, layouts, tooling, jigs, fixtures and build sequencesProvide Problem-Solving Support: Support Production teams with structured problem-solving and practical engineering inputImprove Manufacturing Standards: Drive standardisation and Design for Manufacture improvements across products and processesCollaborate Across Teams: Work with Production and cross-functional colleagues to deliver operational improvementsPromote Lean Manufacturing: Champion Lean Manufacturing principles while maintaining high standards of Health, Safety and EnvironmentCANDIDATE REQUIREMENTSStrong analytical and numerical skills, with the ability to interpret manufacturing data and performance metricsPractical, hands-on engineering approach with sound manufacturing judgementAbility to apply engineering principles to improve processes, efficiency and costKnowledge of Lean Manufacturing toolsExcellent project management and organisational skillsSelf-motivated, proactive and accountable, with the ability to work independently and deliver resultsStrong communication and stakeholder management skillsAble to manage multiple priorities in a fast-paced manufacturing environmentAdvanced Microsoft Office skills, particularly Excel, Word and PowerPointGood understanding of Health and Safety legislation and best practiceDegree or Level 6 qualification in Engineering, Manufacturing or a related discipline, or equivalent practical experienceCAD experience would be desirableHOW TO APPLYTo be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CVs of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose.JOB REF: AWDO-P15065Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Plymouth, Devon, South West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online.AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency.TPBN1_UKTJ

KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland - BAM UK & Ireland's infrastructure segment is currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking a Survey CAD Modelling Technician. This role focuses on supporting the survey engineers, by processing raw data gathered from site surveys and completing survey modelling requests. The role will have a particular focus on processing laser scanner surveys. The ideal candidate will have significant experience operating 2D and 3D CAD programmes, and an understanding of surveying and the construction industry. Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and who have been UK residents for the last 5 years can be considered for this role. Your team Location: Devonport Dockyard, Plymouth Contract: Permanent, 42.5 hours a week Making Possible In this role as Survey CAD Modelling Technician, you will be working in a live MOD facility. Your day-to-day tasks will include: Verify and process survey data from field surveyors. Process total station surveys to report on constructions stages Process laser scanning surveys. Clean and model surveys to determine if construction tolerances have been met Ensure survey data is collected and recorded accurately, following project QA/QC standards Provide drawing and modelling services from survey or design data to support the survey, engineering and construction teams Assist with the implementation of quality control procedures, particularly in accordance with QC1 requirements; maintaining the highest standards of traceability, tolerances, reporting Manage and archive survey files and records to support project compliance and audits, using the Projects Document Management system Support the Business Systems Manager and wider Business Excellence team as required This profile is not exhaustive. From time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be given What do you bring to the role? Essential: Degree, diploma, or relevant qualification in Civil Engineering, Surveying, Architecture, or Construction Strong skills in AutoCAD (Civil3D) and Revit Considerable years of experience in a similar position within the construction industry Knowledge of BIM or digital construction processes Understanding of document control and reporting requirements Strong attention to detail and organizational skills Excellent communication and teamwork abilities CSCS Card and relevant site safety qualifications Member of the CinstCES (or technical member working towards full member), or another body Site based role, hybrid or home based role will be considered Desirable: Experience with survey processing software; Leica Infinity/Leica Cyclone 3D Familiarity survey equipment; total stations, GPS/GNSS and laser scanners Understanding of QC1 procedures and quality documentation in a civils context Whats in it for you? Competitive salary A wide range of family-friendly policies Company car/car allowance/travel allowance 8 % matched pension contributions Private healthcare Life assurance 26 days holiday 2 wellbeing days 1 volunteering day Personal and professional development About BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at anytime you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you. TPBN1_UKTJ

KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland - BAM UK & Ireland's infrastructure segment is currently delivering the redevelopment project at a Royal Navy site located in Plymouth and is seeking a CAD Engineer. The successful candidate will be self-motivated and possess a couple of years experience in design. Be competent in auto CAD/CIV3D and have a working knowledge in Revit. Have experience in rebar design and detailing with an eye for detail, able to check and validate drawings/models to and from the client while acting as a support function between site and Document Control. Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and who have been UK residents for the last 5 years can be considered for this role. Your team • Location: Devonport Dockyard, Plymouth, • Contract: Permanent, 42.5 hours a weekMaking Possible In this role, you will be working in a live MOD facility. Your day-to-day will include: • Act as a subject matter expert for the production of drawings and provide technical support to personnel as and when required., • Ensure that all drawing work is carried out in compliance with ISO 19650, BAM and CAD standards., • Provide Drawing production training, both to the team members and to the supply chain., • Provide support to the Document Control team to review Drawings before submitting to the client., • Understand the hardware and software requirements on the project and communicate with the BIM Lead and Project information Manager., • Represent the company where necessary at internal and external meetings., • Maintain high safety and environmental standards in accordance with company policies and report any inadequaciesWhat do you bring to the role?, • Degree in related discipline (Civil Engineering, Architecture, etc.) is preferred., • Able to collaborate and work effectively within a multidisciplinary and diverse team, with strong communication and interpersonal skills., • Experienced in rebar design and checking., • Have good understanding of civil/structural design and principles., • Have a strong background in producing drawings, • Proficient in AutoCAD, • Able to train and mentor site engineers and others to produce in accordance with standards., • Prior experience of ProjectWise and Revit beneficial but not essential., • Basic awareness of ISO 19650 (Level 2 BIM) or BS1192 and associated PAS/BS 1192 codes required.Whats in it for you?, • Competitive salary, • A wide range of family-friendly policies, • Company car/car allowance/travel allowance, • 8 % matched pension contributions, • Private healthcare, • Life assurance, • 26 days holiday, • 2 wellbeing days, • 1 volunteering day, • Personal and professional developmentAbout BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued.Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. JBRP1_UKTJ

SHEQ Manager Permanent National travel Who are MCR MCR Property Group is a leading independent real estate investment and development company, we have a strong UK presence with offices in key cities like London, Manchester, Birmingham, and Glasgow. Our primary focus lies in developing new residential and industrial projects and managing a diverse portfolio, which includes around 5,000 residential plots and commercial/industrial assets exceeding £2 billion in value. We are entering an exciting phase of growth and are looking for motivated, personable, and self-driven individuals who have a genuine passion for real estate, construction and property management. Who we want We're currently seeking a SHEQ Manager to join our busy H&S team to oversee our entire portfolio. The role will see you take in our projects throughout the UK. This is an exciting opportunity to join a fast paced thriving business with opportunities for growth and development. As a senior member of the team, you will manage a team of SHEQ Advisors to support projects in the delivery of the companies Health, Safety and Environmental strategy. You will ensure managers assume full responsibility for the discharge of responsibilities, associated with their normal activities on every site. You will conduct travel required across England and Scotland, providing operational teams and SHE advisors with the advice and guidance needed at all times. You will act as the main point of contact for advice and expertise on Health & Safety matters to the project teams to ensure the effectiveness of the Construction, Commercial and Residential properties phase plans during the lifecycle of the project. As part of your daily function, you will undertake reviews of documentation, participate in site safety meetings, H&S Audits & Sensible Monitoring Inspections, and will provide monthly H&S data & safety stats to Directors as needed, along with monthly SHE performance bulletin and send this out to the business. About you Ideally, you will hold a Diploma (or equivalent) in Health & Safety, or construction NEBOSH with 5 years' of experience working within a senior SHEQ position as part of a construction based contractor. A full driving licence is required for the role. A SSSTS or SMSTS is preferred, but a CSCS card would be sufficient. What we offer Attractive salary and wider package 25 days holiday plus bank holidays Your Birthday off Free eye test voucher JBRP1_UKTJ

Description At the heart of Paxton, we are innovators, we look for ways of harnessing new technology to provide better solutions for our customers. We're a global brand with nearly 40 years of experience, our team of over 400 employees is spread around the world. We pride ourselves on creating a vibrant environment, with a focus on excellent company culture. Our teams make Paxton a great place to work with brilliant benefits that come with any role at Paxton, with an emphasis on career progression, training and development, and recognition of achievement for every employee. So, what are the benefits? • We run a great social calendar with wine tasting, cooking classes, onsite yoga, staff parties, monthly internal events and more. Its rare you wont see something going on!, • Private medical insurance (Opt in) and healthcare cash-back plan with Health Shield., • Join a Carbon Neutral company Paxton is Carbon Neutral in the UK, France, Germany & South Africa!, • Modern offices, collaboration spaces, onsite mini-gym, and a gourmet café with subsidised food., • Discounted fitness memberships up to 75% off in your area with GymFlex., • Get involved with collaborative internal groups like our Green Team, EDI Team and the Charity Team., • Tech, bike, and travel or season ticket loans., • 25-days holiday plus bank holidays, and you can buy & sell up to 5 days a year., • Recognised as one of the Best Companies to Work for in the UK, by Best Companies. About the role Join our Electronics Assembly team in our new state of the art facilities based in Brighton. This is a fantastic opportunity for someone that is looking to start or continue their career working within electronics manufacturing. In this role, you will work through the build process of PCBs, working closely with our automated Surface Mount Technology machines. • Using PCB layouts, Bills of Materials (BOM) part lists and written instructions to assemble, rework and/or reassemble units and sub-assemblies., • Picking and kitting of the materials to Pick & Place Feeders and subsequent loading of the kitted trolleys., • Operating automated and manual assembly equipment such as Pick and Place, Solder Screen Printer, Re-flow Oven, Automated Optical Inspection (AOI) and Selective Solder equipment., • Break-out and testing of all PCBAs using our inhouse test systems. This is a day shift position with the hours Monday - Friday 10am - 6pm. What are we looking for? • A team player, someone who can openly communicate and provide honest collaboration in an effective way., • Previous experience in a machine operative or role within an SMT or PCBA manufacturing faciliity., • Some that has a genuine interest in technology and how things are made, and the willingness to learn all the process it takes to build our PCBs., • A strong ability to pay attention to the detail is key to this role, along with the desire to look for improvements in the processes and quality standards. The right attitude is more important to us than your skills or experience. If youre excited about a role but your existing experience doesnt match up with every element of the job description, we encourage you to apply anyway. We want to collaborate with you and hear your ideas, most of all, we want people to enjoy the journey with us. Take a look at what our team thinks of working here https://www.youtube.com/watch?v=8WH7Pi3--zc JBRP1_UKTJ

Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? At M Group Energy, were enabling the energy essential to support our lives. We provide an end-to-end service, delivering solutions in electricity transmission, distribution, renewable energy, EV, metering and home decarbonisation. Youll be joining Aran, part of M Group Energy an industry-leading provider of retrofit and energy efficiency solutions. With a strong reputation for quality and delivery, Aran is focused on improving the comfort, cost of living and sustainability of UK homes, while raising standards across installation projects. What will you be doing? As a Senior Site Contracts Manager,youll take ownership of operational leadership across large-scale or geographically dispersed projects, ensuring safe, compliant and efficient delivery across multiple workstreams. This is a highly visible leadership role where youll coordinate teams, manage delivery programmes and ensure projects meet technical, commercial and client expectations. Your responsibilities will include: • Leading site-based delivery across insulation, electrical, ventilation, solar and remediation programmes, • Managing Contracts Managers, Supervisors and subcontractors to drive safe and efficient delivery, • Overseeing programme progress, ensuring timelines, KPIs and contractual obligations are achieved, • Coordinating labour, subcontractors and operational resources across projects, • Ensuring full compliance with CDM regulations, RAMS and company procedures, • Maintaining strong health & safety governance and site discipline, • Monitoring installation quality and driving right-first-time delivery standards, • Supporting resolution of operational issues, risks and escalations, • Acting as a key contact for clients, attending meetings and providing operational updates, • Collaborating with technical, commercial and leadership teams to ensure aligned deliveryWhat youll bring Were looking for a confident and organised operational leader who can manage multiple projects while maintaining the highest standards of safety, quality and delivery. Youll bring: • Strong site or operational management experience within construction, retrofit or property services, • Experience leading multi-disciplinary or geographically dispersed delivery programmes, • A solid understanding of site management, operational governance and health & safety compliance, • Proven experience managing teams, subcontractors and project delivery, • Strong communication, organisational and leadership skills, • The ability to manage multiple priorities in a fast-paced environment, • Commercial awareness with a proactive, solution-focused mindset, • Previous site experience, with a strong understanding of working in live site environmentsEssential:, • Full UK driving licence, • Comfortable with regular travel and early starts to ensure you are on site at agreed start times, • Flexible to travel across a wide geographical area, including projects spanning from Folkestone to Lincolnshire and across to OxfordshireWhats in it for you? Whats in it for you? We offer a range of benefits designed to support your life in and out of work, some of which include; • Employee assistance programme, • My Rewards portal, access to 1000s of retail discounts, • Enhanced maternity, paternity leave and adoption leave In addition, this role offers; • Company events, including an annual Christmas party, • Christmas shutdown period, • Casual dress, • Free parking and on-site parking, • Referral programme, • Bereavement leave, • And yes Free Sandwich Friday About us We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We are one of the Top 100 UK companies actively supporting and recruiting veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. • Were responsible and go further for our people, clients, communities and the planet, • Were open and seek new and better ways of exceeding expectations, • Were together and as one team; the whole is greater than the sum of the parts, • Were ambitious and embrace opportunity, to lead essential infrastructure services for life Whether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development. Its an exceptional time to be a part of M Group. Please note:?Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3rd?party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding. #MGroupE #LI-SZ #LI-Onsite IND1 . JBRP1_UKTJ

Building a sustainable tomorrow KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland - BAM UK & Ireland's infrastructure segment is currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an experienced Temporary Works Coordinator. Joining the design / engineering team, you will be responsible for co-ordinating all aspects of Temporary Works on one of the major projects ongoing in the dockyard. Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and who have been UK residents for the last 5 years can be considered for this role. Your team Location: Devonport Dockyard, Plymouth Contract: Permanent, 42.5 hours a week Making Possible As an experienced Temporary Works Coordinator, you will have significant experience as a TWC on heavy civils / construction projects, preferably with experience in the nuclear sector. In this role you will be responsible for the following: Reporting to the Lead TWC / Temporary Works Manager Co-ordination of Temporary Works between our site teams and designers Review of TW design briefs prepared by our site teams to ensure they are suitable for issue to the projects Temporary Works Design teams and management of that submission process Management of Temporary Works through the full design preparation and design checking processes in accordance with applicable procedures and client requirements Manage Temporary Works design submissions through their full life-cycle to client approval, implementation, use and dismantling Liaise with different in-house, supply chain and external design consultants simultaneously Ensure the implementation of these Temporary Works on site is in accordance with the approved and checked design details Site inspections and issuing of TW Permits Demonstrate a personal commitment to the projects Health, Safety, Environmental and Quality policies and management system requirements and expectations Develop and maintain an awareness of SHE hazards and associated risks and demonstrate a commitment to eliminate or minimise those risks Understand and effectively undertake SHE accountabilities Manage and coordinate Temporary Works Supervisors Comply with commercial processes Ensure compliance with all relevant legal and regulatory requirements and all relevant Joint Venture policies and processes Provide practical support and mentoring to less experienced members of the temporary works team. This profile is not exhaustive. From time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be given. What do you bring to the role? Degree qualification in civil engineering equivalent is desirable one or more of: - BSc, BA, BEng, MEng, Eng Tech, MICE, TIStructE, Completion of Higher Apprenticeship We will consider personnel working towards Chartership / Incorporation with IStructE, ICE or other appropriate professional body Minimum of 5 years experience as a TWC on heavy civils / construction projects, preferably with experience in the nuclear sector. Experience of overseeing a broad range of reinforced concrete, formwork and falsework Temporary Works schemes as a TWC or in part as a TWS Ideally experience in design and / or engineering management Strong working knowledge of Temporary Works Management procedures Experience in the delivery of major infrastructure projects Awareness of commercial processes A knowledge or experience of structural steel building buildings would be useful Whats in it for you? Competitive salary A wide range of family-friendly policies Company car/car allowance/travel allowance 8 % matched pension contributions Private healthcare Life assurance 26 days holiday 2 wellbeing days 1 volunteering day Personal and professional development About BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. TPBN1_UKTJ

Scaffolders - Plymouth, Devonport - PL1 4SG VGC Group are seeking Scaffolders to join a great team on a Major Infrastructure Project in Devonport, Plymouth. This contract is available to start in Q1 of 2027 subject to BPSS Vetting. Role: Scaffolders Location: Plymouth Salary: £22.07 per hour, 1.5 x rate after 39 hours in a week, 1.5 x rate first 4 hours on a saturday, 2 x rate rest of the weekend. Hours: 10 hour Shifts Contract: Full time Duration: 4 years + Benefits: 31 days holiday per year, training and upskilling provided if relevant to role, pension, £3 a day brief allowance Subsistence: - Lodge available at £51.97 per night for anyone living over 50 miles from site. - Daily Travel allowance available for any operative not on lodge commuting more than 9 miles (in line with CIJC) Experience: 3 years + Quals: - CISRS Part 2 Scaffolder Card - Tube & Fitting - Previous Civil Engineering Experience - Safety Critical Medical (Can be arranged for you) Please apply via link provided You must provide proof of right to work in UK and pass a drugs and alcohol test upon induction. VGC Group is committed to equality, diversity and inclusion. VGC is acting as an employment business. This is great opportunity to join large, busy, long-term project where you will be able to progress and develop new skills within the construction industry. VGC Group are one of the UK's leading labour supply companies, supporting major tier one contractors on some of the most exciting infrastructure projects in the country. As a people business, we genuinely invest in supporting and developing our workforce, and aim to create opportunities for our workforce to progress. Scaffolders - Plymouth - PL1 4SG INDCS

An excellent opportunity has arisen for an experienced Maintenance Electrician to join one of the country's leading Facilities Management companies working in Plymouth and the surrounding region. The ideal candidate will have a strong electrical background and hold electrical qualifications such as NVQ/SVQ Level 3 in electrical installations or maintenance, and 18th edition as a minimum. The role will be working as part of a team working at a number of retail sites in the region undertaking a range of building maintenance duties. The purpose of this role carry out planned and reactive maintenance on electrical and mechanical plant. Duties: Support other technicians with any major or minor maintenance work. Complete all necessary PPM's and reactive maintenance schedules within agreed timescales and to ensure all necessary paperwork is completed accurately and as required. Prioritising and completing minor maintenance and repair work to agreed timescales. Ensuring all tools and equipment necessary to complete minor maintenance and repairs are always available and serviceable. Although aligned to an area for the purpose of PPM completion there may be times that the Technician will be required to attend other sites within the cluster to carry out work. Work with company and client colleagues to ensure laid-down standards of quality are always maintained. Represent the company in a professional manner at all times and develop a good working relationship with client and colleagues. Carry out all tasks in accordance with specific KPI's. Monitor and update the Mercury system accurately ensuring live job updates from you and your team at all times. Qualifications NVQ/SVQ Level 3 in electrical installations / maintenance Or recognized apprenticeship equivalent 18th Edition Salary / Package Basic Salary - £41,325 (including standby) Paid Travel Time Overtime rates 1.5x monday to friday, 2x saturdays and sundays Call Out - 1 in 4 Private Health Care 33 days holiday Life Insurance Company vehicle with private use This is a fantastic opportunity to join a company that offer continued progression and opportunities for further development whilst offering a generous salary / package. Maintenance Electrician - Plymouth Maintenance Electrician INDAJ Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

Steel Fixers - Plymouth, Devonport - PL1 4SG VGC Group are seeking Steel Fixers to join a great team on a Major Infrastructure Project in Devonport, Plymouth. This contract is available to start in Q1 of 2027 subject to BPSS Vetting. Role: Steel Fixer Location: Plymouth Salary: £22.07 per hour, 1.5 x rate after 39 hours in a week, 1.5 x rate first 4 hours on a saturday, 2 x rate rest of the weekend. Hours: 10 hour Shifts Contract: Full time Duration: 4 years + Benefits: 31 days holiday per year, training and upskilling provided if relevant to role, pension, £3 a day brief allowance Subsistence: - Lodge available at £51.97 per night for anyone living over 50 miles from site. - Daily Travel allowance available for any operative not on lodge commuting more than 9 miles (in line with CIJC) Experience: 3 years + Quals: - CSCS Blue NVQ Level 2 Steelfixing - Previous Civil Engineering Experience - Safety Critical Medical (Can be arranged for you) Please apply via link provided You must provide proof of right to work in UK and pass a drugs and alcohol test upon induction. VGC Group is committed to equality, diversity and inclusion. VGC is acting as an employment business. This is great opportunity to join large, busy, long-term project where you will be able to progress and develop new skills within the construction industry. VGC Group are one of the UK's leading labour supply companies, supporting major tier one contractors on some of the most exciting infrastructure projects in the country. As a people business, we genuinely invest in supporting and developing our workforce, and aim to create opportunities for our workforce to progress. Steel Fixers - Plymouth - PL1 4SG INDCS

Concrete Finishers - Plymouth, Devonport - PL1 4SG VGC Group are seeking Concrete Finishers to join a great team on a Major Infrastructure Project in Devonport, Plymouth. This contract is available to start in Q1 of 2027 subject to BPSS Vetting. Role: Concrete Finisher Location: Plymouth Salary: £20.08 per hour, 1.5 x rate after 39 hours in a week, 1.5 x rate first 4 hours on a saturday, 2 x rate rest of the weekend. Hours: 10 hour Shifts Contract: Full time Duration: 4 years + Benefits: 31 days holiday per year, training and upskilling provided if relevant to role, pension, £3 a day brief allowance Subsistence: - Lodge available at £51.97 per night for anyone living over 50 miles from site. - Daily Travel allowance available for any operative not on lodge commuting more than 9 miles (in line with CIJC) Experience: 3 years + Quals: - CSCS Blue NVQ Level 2 Concrete - Previous Civil Engineering Experience Please apply via link provided You must provide proof of right to work in UK and pass a drugs and alcohol test upon induction. VGC Group is committed to equality, diversity and inclusion. VGC is acting as an employment business. This is great opportunity to join large, busy, long-term project where you will be able to progress and develop new skills within the construction industry. VGC Group are one of the UK's leading labour supply companies, supporting major tier one contractors on some of the most exciting infrastructure projects in the country. As a people business, we genuinely invest in supporting and developing our workforce, and aim to create opportunities for our workforce to progress. Concrete Finisher - Plymouth - PL1 4SG INDCS

Logistics Supervisor - Plymouth - £25.42 PAYE Full Time Employment VGC Group are seeking 1no experienced Logistics Supervisor to join a great team on a Major Infrastructure Project in Devonport, Plymouth. This contract is available to start asap subject to BPSS Vetting. Role: Logistics Supervisor Location: Plymouth Salary: £25.42 per hour, 1.5 x rate after 39 hours in a week, 1.5 x rate first 4 hours on a saturday, 2 x rate rest of the weekend. Hours: 10 hour Shifts Contract: Full time Duration: 4 years + Benefits: 31 days holiday per year, training and upskilling provided if relevant to role, pension, £3 a day brief allowance Subsistence: - Lodge available at £51.97 per night for anyone living over 50 miles from site. - Daily Travel allowance available for any operative not on lodge commuting more than 9 miles (in line with CIJC) Experience: 3 years + Qualifications: - CSCS Blue NVQ Level 2 in Construction/Logistics Occupations - SSSTS - NVQ Level 3 OWS Please apply via directly or whatsapp Dan on (phone number removed) VGC is a leading provider of support services to the UK infrastructure industry. We are recognised for our expertise in providing a skilled workforce and services to major construction projects, including railways, highways, airports and power stations. We focus on safety, quality and sustainability in our operations, all aligned with industry best practice. Our unwavering commitment to uphold the highest standards in delivery, sustainability, collaboration, innovation and ethical business has led to VGC being a leading partner to Tier One clients across the UK and beyond. As leaders in our field for recruitment into the construction, we have a clear set of values and goals that underpins everything we do. The VGC Group, and its associated companies are committed to the principles of equality, diversity and inclusion in recruitment, employment, work, training, project management and service provision. VGC is acting as an employment business in relation to this position. Please apply via directly or whatsapp Dan on (phone number removed) INDCS

Formwork Carpenters - Plymouth, Devonport - PL1 4SG VGC Group are seeking Formwork Carpenters to join a great team on a Major Infrastructure Project in Devonport, Plymouth. This contract is available to start in Q1 of 2027 subject to BPSS Vetting. Role: Formwork Carpenter Location: Plymouth Salary: £22.07 per hour, 1.5 x rate after 39 hours in a week, 1.5 x rate first 4 hours on a saturday, 2 x rate rest of the weekend. Hours: 10 hour Shifts Contract: Full time Duration: 4 years + Benefits: 31 days holiday per year, training and upskilling provided if relevant to role, pension, £3 a day brief allowance Subsistence: - Lodge available at £51.97 per night for anyone living over 50 miles from site. - Daily Travel allowance available for any operative not on lodge commuting more than 9 miles (in line with CIJC) Experience: 3 years + Quals: - CSCS Blue NVQ Level 2 Formwork - Previous Civil Engineering Experience - Safety Critical Medical (Can be arranged for you) Please apply via link provided You must provide proof of right to work in UK and pass a drugs and alcohol test upon induction. VGC Group is committed to equality, diversity and inclusion. VGC is acting as an employment business. This is great opportunity to join large, busy, long-term project where you will be able to progress and develop new skills within the construction industry. VGC Group are one of the UK's leading labour supply companies, supporting major tier one contractors on some of the most exciting infrastructure projects in the country. As a people business, we genuinely invest in supporting and developing our workforce, and aim to create opportunities for our workforce to progress. Formwork Carpenters - Plymouth - PL1 4SG INDCS