Trabajos technician en WednesburyCrear alertas

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the West Midlands: Bournville Coventry Solihull Stoke Wolves/Dudley A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the West Midlands: Bournville Coventry Solihull Stoke Wolves/Dudley A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the West Midlands: Bournville Coventry Solihull Stoke Wolves/Dudley A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

• On-target earnings up to £42,420, • Comprising a base salary up to £36,620, • An uncapped monthly bonus scheme with average additional earnings of £5,800per year., • 5 days a week (This centre is closed on Sundays), • Earn extra with our refer a friend scheme – T&C’s Apply We’re the UK’s largest Automotive service, maintenance and repair business and we offer great career opportunities, benefits and an uncapped bonus scheme. As a Vehicle Technician/ Mechanic, you will be already skilled in servicing and repair/replacement work. You’ll have the ability to carry out more complex tasks such as clutches and timing belt replacements and diagnostics in areas such as vehicle electrics, brake steering and suspension systems. Benefits Include: • 5.6 weeks’ annual leave, • Up to 50% off garage bills in our Autocentres and 25% off most our Halfords products in our retail stores, • Discounts on everything from groceries, shopping, insurance, days out, restaurants and more, • Family & Friends Discount Events, • Opportunity to buy a Trade Price Bike & enrol in the Cycle to Work Scheme, • Financial planning support via Wagestream - access up to 30% of your salary in advance, • GP Access, 364 days a year, 24 hours a day, • Join the Share save scheme with a 20% discount on shares, • Health Cash Plan – to access wellbeing services and claim back healthcare costs, • Pension Scheme & Life Assurance You will be given every opportunity to progress your career at Halfords. This includes access to hybrid training plus the ATA & MOT Tester Qualifications too. Skills and experience • Must have a Level 3 in Light Vehicle Maintenance and Repair or equivalent OR time served experience, • Must have a full drivers licence with no more than 9 points, • Experienced Technician/Mechanic able to carry out diagnostic work (brakes, steering/suspension, engine) and more complex repair and replacements (coolant/diesel injectors, head gasket, brakes, electrical) Why Halfords? We’re in an exciting chapter – rapidly growing our business with a focus on motoring services and electric mobility. We’re the UK’s leading retailer of motoring and cycling products and services, and the UK’s largest Automotive service, maintenance and repair business. Join us and be part of our success story in getting the nation safely back on the move. Not sure you meet all the criteria? We'd encourage you to take the wheel and apply anyway! At Halfords we are committed to creating an inclusive workplace for our colleagues. We're an equal opportunities employer and proud to welcome applications from all backgrounds and embrace diversity within our one Halfords Family.

Job Title: Clean Air Validation Engineer Location: Walsall, West Midlands Salary/Benefits: £28k - £45k + Training & BenefitsA respected name within the Critical Air / Ventilation industry is seeking a hardworking Clean Air Validation Engineer to join their team in the Midlands. Our client provides specialist services to healthcare and pharmaceutical clients, and prides themselves on their professionalism and high service standards. You must be able to demonstrate strong technical knowledge and hands-on experience. Ideally, you will hold the CP and / or AP qualifications, in addition to the BOHS P601. Our client can offer exciting training opportunities, in addition to attractive salaries and comprehensive benefits packages (i.e. vehicle and overtime).Consideration will be given to candidates from the following areas: Walsall, Wolverhampton, Dudley, West Bromwich, Birmingham, Tamworth, Stourbridge, Redditch, Bromsgrove, Kidderminster, Droitwich Spa, Telford, Kidderminster, Lichfield, Cannock, Stafford, Coventry, Rugby, Royal Leamington Spa, Hinckley, Leicester, Swadlincote, Derby, Burton-upon-Trent, Nottingham.Experience / Qualifications: -Track record working as a Clean Air Validation Engineer -Must hold the BOHS P60 -Ideally will hold the CP and / or AP -Fully versed in HTM 0301 guidelines -Good literacy, numeracy and IT skills -Hardworking attitude -Flexible to travel in line with company needsThe Role: -Performing validations and verifications on critical ventilation systems -Working across operating theatres, healthcare and clean room environments -Testing of MBSCs and fume cupboards -Particle counting -Testing DOP and HEPA filters -Identifying performance / technical issues and making recommendations for remedial works -Representing the company in a professional manner -Working in line with company guidelines and timeframes -Completing detailed service reports -Answering technical queries from clientsAlternative Job titles: Validation Engineer, Critical Air Technician, Clean Room Validation Engineer, Ventilation Engineer.Future Select are recruiting in the Compliance / Environmental industry, including: LEV / Critical Air / Clean Air / Air Hygiene / Fire Safety; we work with the best clients & candidates and supply the majority of permanent jobs in the market.We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level.Future Select Copyright 2026TPBN1_UKTJ

Job Title: Electrical Maintenance EngineerLocation: WalsallJob Reference: JBTWALJob Type: ContractDuration: OngoingRate: £35+ per hour outside of IR35Job Description - Electrical TechnicianMy Client is a leading manufacturing site looking for Electrical Technician with FMCG experience to join on both an ongoing basis.Duties as a Electrical TechnicianReacting to breakdowns both electrically and mechanically, fault finding, analysing and continuously improving the site.Work closely with other departments to improve the site.Attend meetings as required, analyse data and find solutions to improve equipment performance whilst ensuring safe working practice and full communications are maintained at all times.In addition, you will be involved in projects within the business to develop an effective engineering install and commissioning.PLC fault findingRequirements as a Electrical TechnicianA formal qualification in an electrical or mechanical engineering subject (apprentice served, NVQ, HNC or equivalent)Strong electrical experience preferable within a FMCG environment.Knowledge / experience of working with controls, analysing faults and providing solutions.Experience of both reactive and preventative maintenanceGood technical ability relating to automation hardware and software.Strong organisation and communication skills and the ability to work in a multi-disciplined team of varying levels of technical experience.please apply ASAP if you are interested in this eletcrical maintenance engineer positionTPBN1_UKTJ

Overview\n \n MET Technician\n \n \nAt Solus,we'reproud of the quality we deliver and the people who make it happen. As we continue to grow and invest in our future,we'relooking for talented Technicians\n \n \nThis is an opportunity to join a forward-thinking repair business where technical excellence, teamwork and care truly matter.You'llwork with modern equipment, strong operational support and colleagues who take re...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Mobile HGV Technician / MechanicBirmingham areaMonday to Friday 8-5Competitive Salary around £40,000 DOE + Overtime + Career Progression + £1,500 Joining Bonus Benefits at a Glance Competitive salary with annual salary reviewsOvertime paid at 1.25x standard rate£1,500 joining bonusMonday to Friday working pattern no weekends25 days annual leave, increasing with service, plus bank holidaysBirthday off each yearPension schemeLife assuranceSame-day virtual GP appointmentsCycle to Work schemeEmployee discountsPaid volunteering daysStructured career progression to Master Technician levelHGV Technician / Mechanic Are you an experienced HGV Technician / Mechanic looking for a rewarding role with excellent career development and a great work-life balance?We are seeking a skilled HGV Technician / Mechanic to join a busy mobile team covering Oldbury, Birmingham and surrounding areas. This is an exciting opportunity for an Mobile HGV Technician / Mechanic who enjoys variety, autonomy, and working with a range of leading commercial vehicle brands.As an Mobile HGV Technician / Mechanic , you will play a vital role in keeping commercial fleets operating safely and efficiently, while benefiting from industry-leading training and development.If you're a dedicated HGV Technician / Mechanic looking to take the next step in your career, we'd love to hear from you.The Role As an Mobile HGV Technician / Mechanic , you will:Diagnose, maintain, and repair a wide range of commercial vehiclesWork on leading manufacturers including Mercedes, Iveco, and FordEnsure vehicles meet high safety and quality standardsPrepare vehicles for MOT inspectionsCarry out mobile maintenance and repair activitiesSupport workshop operations when requiredWork closely with an experienced and supportive teamWhat We're Looking For NVQ Level 3 in Heavy Vehicle Maintenance (or equivalent)Previous experience working on HGVsFull Class 2 UK, Irish, or EU Manual Driving LicenceStrong diagnostic and repair skillsA proactive and detail-focused approachPassion for vehicle maintenance and customer serviceLocation Oldbury, Birmingham and surrounding areasCareer Development Take advantage of a structured five-stage training programme designed to support progression through advanced technical levels, with opportunities to achieve Master Technician status.Apply Today If you're an experienced HGV Technician / Mechanic looking for competitive pay, outstanding benefits, career progression, and long-term stability, apply now.* £750 payable in the first month's pay and £750 payable following successful completion of the 90-day probation period. Subject to tax, National Insurance deductions, and eligibility criteria. Applicants must be able to pass a security check involving financial probity and basic criminality.About UsWe are one of the UKs largest independent automotive dealer groups, operating across dozens of sites nationwide and representing a wide range of respected vehicle brands. Alongside our dealership network, we also operate parts distribution and fleet services divisions.Our culture is built on continuous growthWOVT31043Billy Olivier- Octane Recruitment is a specialist Automotive and Motor Trade recruitment agency, working with main dealerships, bodyshops, tyre management companies, parts distribution centres, independent garages, fleet operators, HGV companies, import centres and manufacturers across the UK. We recruit across the motor trade and related industries.TPBN1_UKTJ

Toolroom Technician\n OldburyDays Shift£33,500 per annum \n Are you an experienced Toolroom Technician looking for a new opportunity with a well-established manufacturer? We are recruiting for a skilled individual to join a busy engineering team, supporting production through the maintenance, repair and manufacture of precision tooling. \n This is a permanent days-based position offering excellent job security, a supportive working environment and the opportunity to further develop your technical skills. The Role\n As a Toolroom Technician, you will be responsible for: \n\n • Manufacturing, maintaining and repairing press and shear tooling.\n, • Diagnosing and resolving tooling faults to minimise production downtime.\n, • Operating both CNC and conventional machine tools.\n, • Using surface grinders, milling machines, lathes, wire EDM and other toolroom equipment.\n, • Reading and interpreting engineering drawings, producing components to tight tolerances.\n, • Supporting production by ensuring tooling is maintained to the highest quality standards.\n, • Prioritising workloads to meet production schedules and deadlines.\n, • Maintaining a safe, organised and efficient working environment.\n, • Accurately recording work completed and communicating effectively with the wider engineering team.\nThe Ideal Candidate\n The successful candidate will have: \n\n • Previous experience working as a Toolroom Technician, Toolmaker or within a precision engineering/toolroom environment.\n, • Experience in press and shear tool manufacture, maintenance and fault finding.\n, • Strong CNC and manual machining skills.\n, • Experience with surface grinding, milling, turning, fixturing and wire EDM.\n, • The ability to read and interpret engineering drawings and work to tight tolerances.\n, • Excellent attention to detail and a commitment to producing high-quality work.\n, • Strong organisational skills and the ability to manage multiple priorities.\n, • A positive, proactive attitude with excellent communication skills.\n, • Eligibility to work in the UK.\n

Multi Trades Recruitment is looking for an experienced Senior Motorcycle & Quad Mechanic to join a well-established and growing workshop team.This is a hands-on role suited to a skilled technician with strong diagnostic ability and a passion for working on high-performance motorbikes and off-road vehicles.About the Role:You will be responsible for maintaining, diagnosing, and repairing a wide range of motorcycles and ATVs, working on leading brands such as Yamaha, Honda, Kawasaki, and Polaris .Key Responsibilities:Diagnose and repair complex mechanical and electrical faultsCarry out servicing, maintenance, and full engine rebuildsWork on engines, transmissions, suspension, and braking systemsRepair and maintain fuel-injected systems and ECU diagnosticsPrepare and maintain off-road vehicles (quads/ATVs)Carry out performance tuning and custom builds (where required)Ensure all work meets manufacturer and safety standardsMaintain accurate service records and job reportsSupervise and support junior mechanics and apprenticesAbout You:Essential Requirements:Minimum 5 years experience working on motorcycles and/or ATVsStrong diagnostic and fault-finding abilityExperience with carbureted and fuel-injected enginesKnowledge of electrical systems and modern diagnostic toolsRelevant qualifications (IMI Level 3/4 or equivalent preferred)Full UK driving licence (motorcycle licence desirable)Desirable Skills:Manufacturer training (Yamaha, Honda, Kawasaki etc.)Experience in performance tuning and custom buildsWelding or fabrication skillsMOT Tester qualification (Class 1 & 2)Whats on Offer:Competitive salary based on experienceOngoing training and development opportunitiesOpportunity to work on a wide range of road and off-road vehiclesSupportive team environment with progression opportunitiesINDTEMPWork Location: In personTPBN1_UKTJ

About the role…We are excited to be recruiting for a Senior Motor Vehicle Technician. This is an unrivalled opportunity to join one of the UK's fastest growing motor groups.As a a Senior Motor Vehicle Technician, you will be responsible for the MOT testing, service, repair and maintenance work for our customers' vehicles, readying them for the road ahead.Representing a variety of manufacturers and carrying out work on a diverse range of vehicles and models, you will take great pride in your work, taking complete ownership of your customers and completing your jobs to the highest standard.We are looking for candidates who would be willing to train within the Manufacturer Franchise and have the desire and ambition to progress onto Master Technician status. Not only do we offer motoring for life, at Stoneacre, we offer a career for life.We genuinely believe that Stoneacre Motor Group is leading the way in EV training, and we are excited to share our knowledge and expertise with you.You will be working in an industry-leading workshop boasting state of the art facilities. Through both in house and manufacturer training, you will be given full support and development enabling you to reach your full potential, and elevate your career in EV Technology, all whilst contributing towards making Stoneacre the Number One Motor Group.Salary up to £45,000 OTE a yearDo we have your interest…?Here at Stoneacre we are committed to creating a diverse and inclusive workplace. It is our ambition to make Stoneacre the best place to work because we recognise that it is our people who make Stoneacre a success. So, what is in it for you?A flexible approach to working patterns - Choose your own hours! We are happy to discuss all flexible working options to help you achieve the work life balance that suits youIndustry leading competitive salaryIndustry leading top level bonusesDedicated manufacturer trainingFast track to EV Level 4Minimum 30 days holiday increasing to 34 days (pro rata basis)Industry leading career progression opportunitiesContributory workplace pension schemeUniform providedLong service rewardCustomer introduced rewardEmployee discountsAccess to discounts on retailers, restaurants, holidays and much moreWellness programmeFree parkingAn average day as a Senior Motor Vehicle Technician …Reporting to the Service Manager, being responsible for meeting both franchise, and company standards in a service environment.Undertake maintenance, service and repair activities on motor vehicles of all types.Working to the highest level within scheduled times to meet company, franchise and manufacturers' standards.Repairing vehicles, testing vehicles and diagnosing faults.Replacing components, parts, lubricants and consumables whilst maintaining records and providing quality write-ups for the customer and manufacturer.Keeping your work area clean, tidy, organised and free from hazards according to current Health & Safety standards and regulations.Advising and reporting on vehicle faults, servicing requirements including future servicing/repair requirements through the Vehicle Health Check and Video processAbout you…We consider candidates from all backgrounds who have experience working in the Automotive sector within a technical roleAs a minimum, you will be qualified to Level 2 NVQ, or equivalent, in Vehicle Maintenance and Repair and hold an MOT Testers LicenceYou will have fantastic communication skills and thrive working in a challenging yet rewarding environmentYou will have the ability to work well under pressure - It will be your technical ability that will help you overcome any challenge that is thrown your way.An Electric and Hybrid vehicle qualification or certification would be advantageous but not essential as full training will be providedHold a full UK driving licenceWe want you to love what you do - The rest will come naturally.“Stoneacre Motor Group are an Equal Opportunity employer committed to diversity in the workplace. We pride ourselves on creating an inclusive work environment where our employees can thrive by being themselves."TPBN1_UKTJ

HGV Technician / MechanicAbout UsJoin a Team That Keeps the UK's Fleets MovingWe provide servicing, maintenance, diagnostics, MOT preparation and repairs for a wide range of HGVs, trailers and commercial vehicles, supporting both our own fleet and external customers. As our business continues to grow, we're looking for an experienced HGV Technician/Mechanic to join our skilled workshop team.If you take pride in delivering high-quality workmanship and want to work in a modern, well-equipped workshop with a supportive team, we'd love to hear from you.Responsibilities:Routine servicing and preventative maintenance of HGVs and commercial vehicles.Diagnosing and repairing mechanical, electrical and hydraulic faults.Repairs to engines, gearboxes, braking systems, suspension and steering.MOT preparation and inspections.Using modern diagnostic equipment to identify and rectify faults.Completing workshop documentation accurately.Working to DVSA standards and manufacturer specifications.Maintaining a clean, safe and organised workshop.Supporting colleagues to deliver an efficient and professional serviceExperience:Previous experience as an HGV Technician or Commercial Vehicle Mechanic.Strong diagnostic and fault-finding skills.Good knowledge of HGV servicing and repair procedures.Ability to work independently and as part of a team.Full UK driving licence.Excellent attention to detail and a positive attitude.Desirable:Level 3 NVQ (or equivalent) in Heavy Vehicle Maintenance and Repair.HGV Class 1 or Class 2 licence.Experience with trailer maintenance and repairs.IRTEC accreditation.Company BenefitsBetween 41,600 49,400 per annum dependant on experience25 days holidayCompany PensionStaff DiscountWe celebrate diversity and are committed to providing equal opportunities for all employees and applicantJob Type: PAYE / Full-timeWorking Hours: 50hrs Monday Friday Location: Titan WV14 7DPTPBN1_UKTJ

Would you like to work for a well-established and growing pest control business, supporting a wide range of commercial and residential clients across the West Midlands?This is an excellent opportunity for a reliable and motivated Pest Control Technician to join a successful and expanding team. The role offers a varied working day, visiting different sites across the West Midlands, carrying out treatments, and building strong relationships with customers.What we need from you:RSPH Level 2 (or equivalent) in Pest Management is essentialAt least 1 years experience working as a Pest Control TechnicianA full, clean UK driving licenceGood written and verbal communication skillsStrong organisational skills and the ability to work independentlyA professional and customer-focused approachA proactive, can-do attitudeThe successful candidate will be subject to an Enhanced DBS checkWhat the role involves:You will be working across a variety of sites throughout the West Midlands, delivering high-quality pest control services to both commercial and residential customers. This is a field-based role where no two days are the same, requiring a high level of independence and responsibility. Duties include:Inspecting customer premises and assessing pest activityCarrying out pest control treatments in line with company standardsUndertaking minor proofing works to prevent pest issuesProducing clear and accurate reports following site visitsManaging your own schedule across multiple sitesIdentifying opportunities to upsell additional services where appropriateSalary: £26,000 £30,000 per year (depending on experience), plus uncapped commission.Hours: Monday to Friday, 9:00am 5:00pm. Overtime may also be required to suit business needs during busy periods.Benefits:Company vehicle20 days holiday, plus Bank HolidaysPPE and uniformCompany pensionOvertime opportunitiesCommission paid on any new businessPlease apply now!TPBN1_UKTJ

Location: WolverhamptonRate: £38-40 per hour (Umbrella PAYE)Salary Equivalent: £56-58kPremium Overtime available at WeekendsShift Pattern: Double Days (This will possibly change at the end of 2026)Contract: Temp-to-permOverviewA great opportunity to join a modern manufacturing environment supporting advanced automated production technologies. You'll be part of a skilled maintenance team responsible for ensuring high-volume machinery and systems operate reliably and safely. Ongoing technical training is provided, including development on major PLC and robotics platforms.As a Maintenance Technician, you will support state of the art automated equipment and advanced EV manufacturing technologies-ensuring the line runs safely, smoothly, and reliably.Your day-to-day responsibilities will include: Working as part of a high-performing maintenance team to deliver safe, efficient production output Ensuring maximum equipment uptime across automated and robotic systems Maintaining, diagnosing, and improving complex manufacturing technologies Conducting machinery audits and ensuring equipment meets electrical and safety standards Performing Preventative Maintenance (PM) to an exceptional standard and documenting improvement opportunities Supporting major breakdowns while independently managing smaller tasks and line monitoring Contributing to automation and equipment improvement projects Promoting and maintaining safe working practices across the production environmentWhat You'll Need: A relevant formal qualification: Indentured apprenticeship, or Level 3 BTEC (or equivalent) in mechanical/electrical maintenance or engineering Ideally have previous experience maintaining machinery in an automotive, production, or automated environment Strong skills in either Mechanical, Electrical, or Pneumatics maintenance Ability to work effectively both independently and as part of a wider maintenance teamAdditional Information Right to work in the UK required Training and upskilling opportunities available* Open to candidates from all industry backgroundsIf interested, please apply with your most up-to-date CV and someone from the team will be in touch.

Mechanical Fitter (Steel / Multiskilled)£40,000 - £42,500 (£55k OTE) + Days Based + Monday to Friday + 1.5x Overtime + Flexible Working HoursWolverhampton, West MidlandsAre you a Maintenance Fitter from a steel background or similar engineering setting, looking for days-based role with flexible working hours, where you will receive full training and be able to advance your career into a Senior Engineer role?In this role you will be working preventively and reactively, in a role split 50 / 50 between mechanical and electrical, working on a range of equipment which uses AC three-phase motors, overhead cranes, pickers, drives and chains. You will also be working on some basic PLC systems and receive a range of training to make you an expert.This company was founded nearly 200 years ago and has developed into a leader within their industry with multiple sites across the UK, carrying out work globally. Due to the high demand of this industry and recent growth, this role will be crucial in implementing a standardised maintenance system across all sites.This role would suit a Multiskilled Fitter or similar, with a minimum level 2 electrical qualification, looking for a stable days-based role working from Monday to Friday.The RoleReactive and preventative maintenance of bespoke manufacturing machineryWorking on various mechanical equipment and machineryFlexi time based on Monday to Friday from 8:00am to 4:00pmThe PersonMulti-skilled fitterLevel 2 electrical qualificationReference Number: BBBH26538bEngineering, Engineer, Electrical, Maintenance, Manufacturing, Machinery, Fitter, PLC, Fault, Finding, Automation, Repair, Service, Technician, Static, Workshop, Bilston, Wolverhampton, BirminghamIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.TPBN1_UKTJ

Structural Technician - Dudley\n A well-established and growing engineering consultancy in Dudley is seeking an experienced Structural Technician to join its successful team. \n This is an excellent opportunity for a Structural Technician with a minimum of five years' experience, ideally within the residential and housing sector. Working on a varied portfolio of projects, you will support the design and delivery of structural solutions from concept through to construction, collaborating closely with engineers, architects and clients. \n The successful Structural Technician will have strong technical drawing and detailing skills, together with experience using industry-standard CAD software. A sound understanding of residential construction methods and structural detailing is essential. Experience with Revit would be beneficial but is not essential, as support and training can be provided for the right candidate. \n The ideal applicant will be organised, accurate and capable of managing multiple projects while maintaining high technical standards. Strong communication skills, attention to detail and the ability to work effectively both independently and as part of a collaborative team are key to success in this role. \n In return, the successful Structural Technician will join a respected consultancy offering a friendly and supportive working environment, a strong pipeline of projects, opportunities for career progression, flexible working arrangements and a competitive salary and benefits package. \n If you are a motivated Structural Technician looking to take the next step in your career with a consultancy that values technical excellence and professional development, we would be delighted to hear from you. All applications will be treated in the strictest confidence.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. \n Job Title: \n A & T Technician \n Reporting To: \n Team Leader (Assembly & Test... \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Pump Technician \n Birmingham \n £40,000 + Overtime (OTE 50k+) + Training + Progression + Benefits \n \n Do you have experience of industrial pumps? Are you looking for a market leading employer offering progression up the career ladder, technically interesting work and lots of overtime opportunities? \n \n The company are a market leading national specialist in Industrial repair work including pumps. Due to growth and securing long term contracts they are looking to expand their team. \n \n The role involves Maintenance, Repair and Overhaul services of industrial pumps working as part of a team on site. \n \n Here is a fantastic chance to join a highly respected company where you can take your career to the next level. \n The Role \n \n *Repair of industrial pumps \n *Assembling of pumps for installation \n *Monday to Friday Days (although weekend work overtime is always available) \n *Based on 40 hour week \n \n The Person \n \n *Experience of working on industrial pumps \n \n For more information please click apply - Reference = 5241 elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Pump Fitter | Pump Technician | Mechanical Fitter | Mechanical Engineer | Fitter | Engineer | Pumps | Industrial Pumps | Repair | Industrial | Birmingham | Dudley | Wolverhampton | Walsall | Stourbridge | Kidderminster | West Bromwich INDMP

Grade/Salary: Band G, SCP 32-37 (£42,839 - £48,226 per annum)Contract Type: Permanent, Full-timeWorking Pattern: Monday – Friday, 37 hoursLocation: Sandwell Council House, Oldbury (Hybrid)Closing Date: 06/09/2026Sandwell Council’s Finance & Transformation Division is seeking a detailed and qualified Assistant Corporate Accountant to join its Accounting team on a full-time, permanent basis based from its Oldbury office. The organisation is operating to a hybrid working model. Reporting to a Financial Accountant, the role will be key in ensuring effective financial management of the Council's statutory and corporate reporting responsibilities. This includes assisting on year-end accounts closure and the preparation and production of the Statement of Accounts and statutory returns, supporting external audit processes, and ensuring compliance with accounting standards and local government finance regulations. The role also involves providing financial advice and guidance to budget holders, developing financial models and reporting tools, and supervising Finance Assistants or Accountancy Trainees where required. The successful candidate will need relevant financial reporting experience, strong analytical skills, excellent attention to detail and communication skills, the ability to interpret and communicate complex financial information and the ability to build effective relationships with a wide range of stakeholders.About the role\n\n • Undertake financial year end activities in accordance with agreed processes and timescales\n, • Provide financial advice and guidance to finance colleagues, budget holders on corporate accounting matters\n, • Preparation of robust financial modelling, including financial projections, to agreed timescales and standards\n, • Completion of reconciliations as required\n, • Undertaking of treasury management activities\n, • Completion of grant claims and statistical returns\n, • Completion of statutory returns \n, • Support the team in maintenance of the corporate fixed asset register\n, • Such other duties as may be appropriate to achieve the objectives of the post to assist the Service Area in the fulfilment of its objectives commensurate with the post holder's salary grade, abilities and aptitudes.\nAbout you \n\n, • Qualified Accounting Technician or equivalent or part qualified member of a chartered accounting body\n, • A minimum of 2 years’ experience gained in a financial management environment preferably at least some in a public sector environment\n, • Knowledge of and ability to use financial systems \n, • Ability to travel to all parts of the borough\n, • Flexibility and willingness to work with changing and conflicting demands\n, • Strong organisational and interpersonal skills\n, • Ability to understand and disseminate complex financial and non-financial data and to prepare reasoned reports from this information\n, • Ability to make decisions based upon the interpretation of financial and non-financial data\nWhy Sandwell Council?At Sandwell Council, our work has a real impact. We are proud to be a values-led organisation that supports its employees with excellent benefits, a competitive remuneration package, and a strong focus on development. By joining us, you’ll play a key role in delivering services that make a real and lasting difference to thousands of people across the borough.How to applyWe reserve the right to close this vacancy early should a high number of applications be received. Applicants are therefore strongly encouraged to apply as soon as possible. If you are an internal candidate and currently at risk, please let the recruiting manager know. We place equality, diversity and inclusion at the core of who we are and how we lead, where every voice matters. At Sandwell, we recognise and value the richness that comes from diverse lived experiences, perspectives, backgrounds and identities. This diversity makes us a stronger and more effective council.We welcome applications from all backgrounds and are committed to building a workplace where everyone feels they belong, are treated fairly, and have the opportunity to thrive. Creating an environment where colleagues feel respected, supported and able to contribute fully is central to our culture and the way we work. We are committed to ensuring that all applicants and employees have equitable access to opportunities. Reasonable adjustments are available throughout the recruitment process and within the workplace so that everyone has the support they need to perform at their best and succeed in their role.

Trainee Cyber Security Analyst | £30K–£40K | Job Placement Programme \n Job Guarantee \n Complete the programme and get a job, or get your course fees back \n Ready to start a career in Cyber Security? \n ITOL Recruit’s Cyber Security Analyst Traineeship is designed for career changers candidates looking to break into one of the UK’s fastest-growing industries. \n No prior experience required. \n Train online at your own pace and land your first Cyber Security Analyst role in as little as 1–3 months. \n *Please note this is a training course, and fees apply. \n \n Salary Expectations: \n\n • IT Technician / Helpdesk: £30,000+\n, • Cyber Security roles after progression: £40,000+\n, • Senior Cyber Security roles: £45,000+\n\n \n We Get You Hired \n We’re not new to this. ITOL Recruit has over 15 years’ experience placing candidates into business analysis, project management, and change management roles. \n Flexible, Affordable, Achievable \n To make things easier, we offer flexible payment options to spread the cost of your training over 12 months so you can get qualified without financial pressure. \n \n Our Programme Includes: \n\n • CompTIA A+, Network+, and Security+ certifications\n, • Live Labs to practise configuring networks, troubleshooting systems, and identifying vulnerabilities\n, • Professional CV and LinkedIn optimisation\n, • Dedicated recruitment support until you’re placed\n\n \n Note: \n Please note this is a training course, and fees apply. \n \n Ready to Start? \n If you’re motivated, curious, and ready to break into cyber security, we’ll help you turn that ambition into a career you can be proud of. \n Apply now, and one of our expert Career Advisors will be in touch within 4 working hours to guide you through your next steps.

Production Engineer (Electrical / CAD)£40,000 - £43,000 + Progression + Training + 34 Days Holiday + Healthcare + 5% PensionWalsall, Birmingham \n Are you a Production Engineer or similar from an Electrical background, who has the ability to interpret schematics, create 2D assembly drawings for skilled workers and visual instructions for production assembly staff? \n Do you want to join a successful business that can offer a vast variety of engaging work, internal training courses and on-going progression into senior and managerial positions? \n In this role you will work within the New Product Introduction team. You will produce 2D electrical schematics and wiring drawings from customer specifications, while creating clear visual assembly instructions and manufacturing documentation to support both skilled Electrical Wirers and production assembly staff. \n This company are a strategic manufacturing and outsource partner for machine builders and OEM's. Specialising in automated equipment, they employ over 200 staff and are looking to grow revenue to over £200 million in the next 2 years. \n This role would suit a Production Engineer (or aspiring) with the ability to interpret complex designs, create 2D schematics and visual work instructions looking for a high-variety role where no two days will be the same, for a business that champions training and career development. \n The Role: \n\n • Interpreting complex customer designs\n, • Creating 2D electrical schematics and wiring diagrams\n, • Creating visual, Ikea-style, instructions for production assembly style\n, • Support New Product Introduction\n, • Helping Project manage Production and Assembly\n, • 39 Hour week, Monday - Thursday 8am - 5:15pm, Friday 12pm early finish\n\n The Person: \n\n • Production Engineer or aspiring Production Engineer\n, • Electrical background\n, • 2D Electrical CAD skills\n\n Job Reference: BBBH 26430 \n Keywords: Electrical, Production, Engineer, Technician, CAD, Solidworks, EPLAN, Schematics, 2D, Electronic, NPI, Manufacturing, SPM, Special, Purpose, Machinery, VWI, Visual, Work, Instruction, Assembly, Build, Control, Panel, Walsall, Cannock, Burntwood, Tamworth, Birmingham, Wolverhampton \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Maintenance Technician / Site Manager Reports To \n Headteacher / School Business Manager Job Purpose\n The Maintenance Technician / Site Manager is responsible for ensuring that the school site, buildings, and grounds are safe, secure, clean, well-maintained, and fully operational. The post holder will oversee the day-to-day maintenance of the premises, coordinate contractors, ensure compliance with health and safety legislation, and provide a welcoming environment for pupils, staff, and visitors. Key ResponsibilitiesSite Maintenance\n\n • Carry out routine inspections of school buildings, grounds, and equipment.\n, • Perform general maintenance and repairs, including basic plumbing, carpentry, painting, decorating, and minor electrical work where competent.\n, • Identify maintenance issues and arrange repairs where specialist contractors are required.\n, • Maintain heating, lighting, ventilation, and water systems to ensure efficient operation.\n, • Ensure all school facilities are maintained to a high standard.\nHealth & Safety\n\n, • Ensure the school complies with all relevant health and safety legislation.\n, • Conduct regular health and safety inspections and risk assessments.\n, • Maintain accurate records of inspections, maintenance, and statutory compliance.\n, • Monitor fire safety systems, emergency lighting, fire alarms, extinguishers, and evacuation procedures.\n, • Respond promptly to emergencies, including security incidents and building-related issues.\nSecurity\n\n, • Open and secure the school buildings each day according to agreed schedules.\n, • Lock and unlock premises for staff, contractors, and community users.\n, • Monitor site security, alarms, CCTV (where applicable), and access control systems.\n, • Respond to alarm activations and security concerns when required.\nGrounds Maintenance\n\n, • Maintain school grounds to provide a safe and attractive environment.\n, • Arrange or undertake grass cutting, hedge trimming, litter removal, leaf clearance, and gritting during icy conditions.\n, • Ensure pathways, car parks, and play areas remain safe throughout the year.\nContractor Management\n\n, • Coordinate and supervise contractors working on site.\n, • Ensure contractors comply with safeguarding procedures and health and safety requirements.\n, • Obtain quotations where required and monitor the quality of completed work.\nFacilities Management\n\n, • Manage waste disposal and recycling arrangements.\n, • Monitor stock levels of maintenance supplies and cleaning materials.\n, • Assist with room setups for assemblies, examinations, performances, and school events.\n, • Support lettings and out-of-hours use of school facilities where applicable.\nCompliance\n\n, • Ensure statutory inspections are completed, including:\n \n, • Fire safety equipment\n, • Emergency lighting\n, • Legionella control\n, • Asbestos management\n, • Electrical testing\n, • Gas safety\n, • Lifting equipment (where applicable)\n \n, • Maintain accurate maintenance logs and compliance records.\nBudget Management\n\n, • Assist with planning and monitoring the premises maintenance budget.\n, • Source cost-effective repairs, materials, and services.\n, • Recommend improvements to buildings and facilities.\nSafeguarding\n\n, • Promote and safeguard the welfare of children and young people.\n, • Follow all school safeguarding policies and procedures.\n, • Report any safeguarding concerns immediately in line with school policy.\nGeneral Duties\n\n, • Act as a key holder and attend the school outside normal working hours when required.\n, • Provide excellent customer service to staff, pupils, parents, visitors, and contractors.\n, • Attend training as required.\n, • Undertake any other duties appropriate to the role as requested by the Headteacher or School Business Manager.\n\n Person SpecificationEssential Qualifications\n\n • Good standard of general education (GCSEs or equivalent).\n, • Relevant maintenance, building services, or facilities management qualification, or equivalent experience.\n, • Health and Safety qualification (or willingness to obtain).\n

Architectural Technician (Training on Revit)£40,000 - £45,000 + Training + No Weekends + Progression + Company BenefitsWolverhamptonAre you an Architectural Technician or similar looking for a role in a well-established company that offers ongoing training including development on Revit, opportunities to progress into senior positions and management as well as working on a variety of interesting projects across multiple sectors?On offer is the opportunity to join a well-established architectural practice specialising in the design and delivery of projects across the residential, commercial, and education sectors. With a strong reputation for producing high-quality designs and building lasting client relationships, the company continues to secure a diverse range of projects and offers excellent long-term career prospects.In this role, you will be responsible for producing high-quality technical drawings and project documentation, monitoring quality throughout each stage of the design process, and managing projects from concept through to completion. You will work closely with clients, contractors, and the wider design team to ensure projects are delivered on time.This role would suit an Architectural Technician or similar looking for a role in a well-established company that offers ongoing training to advance your career and opportunities to progress over the long term.The Role: \n\n • Producing high-quality technical drawings and project documentation\n, • Monitoring quality throughout each stage of the design process\n, • Work closely with clients, contractors, and the wider design team\n, • Monday to Thursday (8:30AM-5PM) Friday (8:30-4:30)\n\n The Person: \n\n • Architectural Technician or similar\n, • Commutable to Wolverhampton\n\n Job Ref: BBBH26231BArchitectural Technician, Architect, Technician, Technologist, Wolverhampton, Birmingham, AstonIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Maintenance Technician (Industrial) \n £40,000 - £42,500 (55k OTE) + Days Based + Monday to Friday + Progress to Senior Engineer + Generous Overtime + Flexible working hours \n Bilston, West Midlands \n Are you a Maintenance Technician or similar looking for days-based role with flexible working hours, where you will be able to advance your career into a Senior Engineer role? \n In this role you will be working... \n \n ZIPC1_UKTJ

Test Technician ContractTest Technician Contract OpportunityInternational TravelExpenses paid£19-£22ph PAYE or Umbrella £21-25ph optionMust be ok to work abroadWhat Youll Do as a Test TechnicianAs a Test Technician , youll play a critical role in assembling, testing, and calibrating highly sensitive electromechanical devices.Your responsibilities will include:Assembly of precision instruments and handheld devices.Testing and calibration throughout the build process ensuring accuracy before units are closed.Maintaining exceptional standards of cleanliness and precision .What Were Looking For as a Test TechnicianInstrument test experienceAbility to read engineering drawings .Background within test of electro mechanical productsReady to join this world-class team? APPLY NOW FOR THE TEST TECHNICIAN ROLE or call Jacob @orion on 01189239228 orINDMANTPBN1_UKTJ

Mechanical Fitter/Technician£26,000 - £28,000 + OTE £33,000 + Bonus + Training + Excellent Company Benefits Dudley, West Midlands Are you a Fitter/Technician from a Mechanical background, looking to join an expanding team where you will be able to work on specialist equipment and be provided with Electrical training and development?On offer is a great opportunity to join a company within a niche industry, who invest heavily in developing the skillsets of their workshop team and offer 1.5x overtime with performative bonuses too.The company has been around for around 50 years and have continuously grown over time. Their products are niche but they lead the market in its production. Despite growth, the team still has a close-knit feel as you'd have with a smaller team.This is a Monday to Friday role, where you will be working on the production of specialist equipment. Full training will be given.This role would suit someone who has experience working within a Mechanical role in a workshop environment looking for electrical training and plenty of overtime.The Role; \n\n • Working in a production environment\n, • Electrical training provided\n, • Monday - Friday, days based\n\n The Person; \n\n • Mechanical Fitter/Technical experience in a Manufacturing Workshop\n, • Wanting to develop their skillsets including Electrical training\n, • Looking to work for a growing business\n\n \n Reference Number: BBBH277278To apply for this role or to be considered for further roles, please click "Apply Now" or contact Tom O'Reilly at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

CAD Technician (SolidWorks/Steel) \n West Bromwich \n £45,000 - £55,000 per year + Company Van + Mileage Allowance + Generous Holiday Scheme \n Are you a CAD Technician or similar from a steel background who can use SolidWorks, looking to join a growing company who are overflowing with new work supplying into the largest sectors in the UK such as Aerospace, Telecommunications, Heritage and Railway, and many more? \n Do you want to join a growing company that is expanding its team with a CAD Technician from a steel background who can use SolidWorks or similar to manage a heavier workload from increasing number of projects across the UK, while also enjoying a generous holiday allowance, working alongside other senior designers, and developing your skills and long-term career? \n On offer, is the opportunity for a CAD Technician or similar to join an expanding business that supplies major UK sectors including Aerospace, Telecommunications, and Heritage and Railway. Established just one year ago, this company has consistently proven its ability to scale both their projects and employee base. \n In this role, the successful CAD Technician or similar will be responsible for designing structured steelworks, travelling to carry out on site measurements once a week, and take precise measurements for new projects, they will then design the required custom solutions and send the final plans to the customer for approval. \n The ideal CAD Technician or similar will be experienced using 3D SolidWorks, with a background in metal design. \n The Person: \n\n • Full experience and knowledge working with SolidWorks\n, • Background in metal design\n, • Background in a similar engineering company\n\n The Role: \n\n • Travelling to site and measuring projects\n, • Designing structured steelworks\n, • Sending plans to customers\n\n Reference: BBBH26716AF12 \n Keywords: Design Engineer, solidworks, company van, mileage allowance, generous holiday scheme, site travel, measurements, client interactions, designing, redesigning, telecommunications, aerospace, heritage and railway, 3D CAD, CAD, Technician \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Red Recruitment are currently recruiting for a Toolroom Technician to join a busy manufacturing business based in the B64 area.This is an excellent opportunity for a technically minded individual to join an established team, working within a busy toolroom environment and producing precision tooling for manufacturing operations.Key Responsibilities: Machining cutters ready for use on production machineryAssembling cutter blocksProducing bespoke cutters from plans and engineering drawingsUsing workshop machinery and tooling equipmentEnsuring all work is completed accurately and to the required standardCarrying out quality checks on finished toolingMaintaining a clean, safe and organised work areaSupporting the wider production and toolroom teams as requiredRequirements: Previous experience in a toolroom, engineering, machining or similar technical role is advantageousExperience working from engineering drawings and plansGood attention to detail and a thorough approach to workStrong practical and mechanical aptitudeWillingness to learn and develop new skillsPositive and reliable attitudeAble to work effectively as part of a teamFull training will be considered for the right candidate.Benefits: Competitive rate of payBonus opportunitiesRegular overtime availableCompany pensionExcellent training and development opportunitiesLong-term job securitySafe and supportive working environmentIf you're looking for a long-term opportunity within a busy manufacturing environment and have a practical or technical background, we'd love to hear from you.Apply today with your up-to-date CV to be considered for this opportunity.TPBN1_UKTJ

Maintenance Technician (Flexible Shift Pattern)£40,000 - £50,000 + OTE 55K-70K + Flexible Shift Pattern + Company Vehicle + Overtime + Company BenefitsOldbury Are you a Maintenance Technician or similar looking to join a well-established company that values hard work, offers excellent pay, and provides plenty of overtime to maximise your earnings while offering long-term job security? On offer is the opportunity to join a well-established engineering contractor delivers high-quality mechanical installation and maintenance services across a range of industrial sectors. With continued investment in employee development, modern equipment, and ongoing business growth, the company offers excellent career progression opportunities alongside a supportive and collaborative working environment. In this role, you will carry out the installation, maintenance, and repair of a wide range of mechanical equipment across industrial sites. You will be responsible for assembling, fitting, and aligning machinery, carrying out mechanical repairs, and ensuring all work is completed safely and to a high standard as part of planned projects and reactive maintenance work. This role would suit a Maintenance Technician or similar looking to join a well-established company that values hard work, offers excellent pay, and provides plenty of overtime to maximise your earnings.The Role: \n\n • Carry out the installation, maintenance, and repair of a wide range of mechanical equipment across industrial sites.\n, • Assemble, fit, align, and repair machinery and mechanical components to a high standard.\n, • Flexible working hours\n\n The Person: \n\n • Maintenance Technician or similar\n, • Background working on Plant machinery\n\n Job Ref: BBBH26610B Maintenance Technician, Mechanical Fitter, Fitter, Mechanical Technician, Mechanical Maintenance, Maintenance Fitter, Installation Engineer, Industrial Fitter, Plant Fitter, Engineering, Mechanical Engineering, Industrial Maintenance, Machinery Installation, Machinery Maintenance, Mechanical Repairs, Mechanical Assembly, Pipefitting, Conveyor Systems, Workshop, Site Work, Oldbury, West Bromwich, Smethwick, Dudley, Tipton, Wednesbury, Birmingham, Halesowen, Rowley Regis, Wolverhampton, Walsall If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Launch Your Cyber Security Career – Job Guaranteed! \n Cyber attacks are rising, and companies need skilled professionals now more than ever. \n \n With Newto Training’s Cyber Security Career Programme, you’ll gain 4 top certifications (Azure Fundamentals, CompTIA Security+, CompTIA CySA+, Forescout FSCA) plus real-world project work that doubles as hands-on experience. \n 100+ hours of live training \n Practical skills in troubleshooting, networking (Cisco), Azure cloud, Splunk SIEM & Tenable vulnerability management \n Job guarantee with our hiring partners \n Get certified, get experience, get hired. \n \n Apply today and start your journey into cyber security. \n Course cost - £2295 or £191.25 per month \n \n \n We guarantee you will be offered a job upon completion, or we will refund you 100% \n of your course fees.

\n \n \n \n e're looking for a Building Civils Design / Senior Civil Engineering Technician to join our Kier Design team, based in either Liverpool (Speke) or Norwich (Wymondham). \n This is an opportunity to be part of a well-established and supportive team, working on the design of a diverse range of building projects and site redevelopments. Projects span a variety of sectors, including education, retail, blue light, defence, conservation and commercial developments, offering plenty of variety and challenge. \n With core teams in Liverpool and Wymondham, you'll also benefit from being part of Kier Design's wider 750-strong design practice, giving you exposure to large, high-profile building developments and the chance to collaborate with experienced professionals across the business. \n Location: Liverpool (Speke) or Norwich (Wymondham) - travel to the office required with some remote working Hours: Permanent Fulltime 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us We are unable to offer certificates of sponsorship to any candidates in this role. \n What will you be responsible for? \n As a Building Civils Design / Senior Civil Engineering Technician, you'll be working within the Civil and Structural Engineering team, supporting them in delivering high-quality civil engineering and drainage design solutions. Your day to day will include: \n \n • Producing and checking coordinated civil engineering and below ground drainage drawings, design models, schedules and specifications within a quality assurance environment\n, • Checking and coordinating civil engineering and drainage design information with other technical disciplines\n, • Detailing flexible and rigid pavement designs for roads, car parks and hard standings\n, • Preparing material and workmanship specifications for civil engineering, drainage and building elements\n, • Occasionally visiting sites to carry out surveys and inspections, and attending meetings with clients and consultants\n \n What are we looking for? \n This Building Civils Design / Senior Civil Engineering Technician role would suit someone who: \n \n • Holds a qualification in Civil Engineering, Building, Construction or Structural Engineering (Degree, HNC, BTEC or equivalent)\n, • Brings strong experience using tools such as REVIT, Navisworks, AutoCAD and Autodesk Civil 3D to produce high-quality, compliant models and drawings\n, • Has hands-on experience with drainage design software such as Innovyze InfoDrainage (or similar), alongside a solid understanding of drainage and SuDS systems\n, • Is confident reviewing and checking the work of others within a Quality Management System environment\n, • Holds a full UK driving licence, with working knowledge of BIM standards (ISO19650), and a genuine commitment to sustainability and continuous professional development\n \n Rewards and benefits \n We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. \n Diversity and inclusion \n Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. \n We look forward to seeing your application to #joinkier. #LI-MA1\n \n \n \n

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. \n Job Title: Test Systems Commissioning Technician \n Reporting To:Manage... \n \n ZIPC1_UKTJ

Shift Pattern: 4 on, 4 off DaysLocation: WorcesterSalary: Competitive BenefitsA leading manufacturing business is looking to recruit a Maintenance Technician to join its engineering team. This is an excellent opportunity for a multi-skilled engineer to work within a fast-paced production environment, supporting the maintenance and continuous improvement of manufacturing equipment and site facilities.Reporting to the Maintenance Coordinator and Maintenance Manager, you will be responsible for ensuring production lines, utilities, and site equipment operate safely and efficiently. You will respond to breakdowns, carry out planned preventative maintenance, and contribute to continuous improvement initiatives across the site.Key Responsibilities Carry out planned preventative maintenance in line with maintenance schedules.Diagnose and repair electrical and mechanical faults to minimise downtime.Perform fault finding on pneumatic, hydraulic, and automated systems.Support production teams with engineering-related issues.Complete maintenance documentation and handover reports accurately.Participate in root cause analysis and implement corrective actions.Identify opportunities to improve reliability, efficiency, and performance.Ensure all work is completed safely and in accordance with company procedures.Assist with contractor management and permit-to-work activities when required.About You To be successful in this role, you will have previous engineering or maintenance experience gained within a manufacturing or production environment. You will be a proactive problem-solver with strong electrical and mechanical fault-finding skills.Essential Requirements NVQ Level 3, City & Guilds, ONC, or equivalent qualification in Electrical and/or Mechanical Engineering.Previous maintenance experience within a manufacturing environment.Experience repairing electrical breakdowns and fault finding on hydraulic and pneumatic systems.Strong communication and problem-solving skills.Ability to work independently and as part of a team.Computer literacy, including Microsoft Office.Desirable Skills Knowledge of PLCs, ideally Siemens.Experience modifying control panels and reading wiring diagrams.Understanding of automation systems and frequency inverters.Welding, fabrication, or machining skills.Knowledge of industrial refrigeration systems.What's on Offer? Stable role within a well-established manufacturing business.Opportunity to develop technical skills and progress your career.Supportive engineering team environment.Ongoing training and development opportunities.Competitive salary and benefits package.For a confidential discussion and further information, please get in touch.01296737349INMIDTPBN1_UKTJ

This Multiskilled Maintenance Engineer vacancy is a salary of £57600 plus bonus and a premium overtime of x1.5/x2, taking OTE to well over £65K+. This is a fantastic opportunity to work for a market-leading manufacturing group at their flagship manufacturing facility based near the area of Aldridge.This role offers fantastic industry leading company benefits such as extensive accredited OEM training and personal development opportunities, with a development route through to further career opportunities, and pension match of up to 10%, premium overtime is available.What's in it for you as Maintenance Engineer:Salary £57600+ plus bonus, plus premium overtime, OTE well over £60K+In addition, you have a matched pension of up to 10%, share options, overtime at a premium, as well as an extensive benefits programHours of work - 4 on, 4 off Days and Nights, 6-6OEM Training and career development, including health and safety training, management training (ILM) & IOSH, cross-skilling and upskillingThe ability to work within a skilled team of engineers permanentlyExperience and Qualifications Required for Maintenance Engineer:Apprenticeship in Electrical or Mechanical Maintenance - City & Guilds, ONC, BTEC Level 3, NVQ Level 3Previous experience as a Maintenance Engineer, Maintenance Technician, Engineering Technician, Engineer etcPrevious experience of undertaking reactive maintenance and following PPM schedules within a manufacturing environmentThe company is a market leader, and international manufacturer, with an impressive background of investing in and developing employees at all levels of their business, providing extensive training and career progression opportunities.Please apply now!TPBN1_UKTJ

We are seeking a technically capable Automotive Quality Engineer who enjoys solving problems, working with customers and driving continual improvement.This is a hands-on engineering role focused on customer quality rather than inspection.Purpose of the RoleThe Quality Engineer is responsible for customer quality, technical investigations and continual improvement activities.The successful candidate will lead customer complaint investigations, produce robust customer-facing 8D reports and work closely with production to identify Root Cause and permanently eliminate recurring issues.The Quality Engineer supports the Quality Manager in maintaining the Quality Management SystemKey ResponsibilitiesLead customer complaint investigations.Produce robust customer-facing 8D reports.Conduct structured Root Cause Analysis using recognised methodologies.Implement and verify corrective actions.Support PPAP and APQP activities.Maintain FMEAs and Control Plans.Analyse production quality data and identify improvement opportunities.Work closely with Production and Technical teams to improve process capability.Support customer visits and technical discussions.Raise and investigate internal non-conformances.Assist with internal audits.Support continuous improvement projects across the business.Provide technical support to the Quality Manager when required.Essential ExperienceAutomotive manufacturing experience.Experience working within an IATF 16949 environment.Customer quality experience.Experience producing customer 8D reports.Strong Root Cause Analysis skills.Knowledge of PPAP, APQP, FMEA, SPC and MSA.Excellent written and verbal communication skills.Highly DesirableExperience within:ElectroplatingSurface engineeringMetal finishingFastener manufacturingPrecision engineeringKnowledge of:Fastener property classesHydrogen EmbrittlementSalt spray testingHardness testingAutomotive coating specificationsPersonal AttributesWe are looking for someone who:Enjoys technical problem solving.Is analytical and methodical.Communicates confidently with customers.Takes ownership of problems.Works well under pressure.Wants to continually improve processes.Is driven by finding Root Cause rather than quick fixes.We Are Not Looking ForThis role is not an inspection or Quality Technician position.Candidates should be able to demonstrate experience leading customer quality investigations, producing customer-facing 8D reports and working directly with automotive customers within an IATF 16949 environment.TPBN1_UKTJ

EDM Wire Erosion Technician\n\n Based in Tipton, West Midlands\n\n\n £35000 - £40000 package\n\n\n \n\n\n Calling all experienced Wire EDM professionals!\n\n\n \n\n\n We are seeking a EDM Wire Erosion technician to work for a leading engineering company based in Tipton, West Midlands.\n\n\n \n\n\n The company operate within various arenas including aerospace, defence and automotive sectors, having built a reputation for quality of service over 30 yea...\n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n \n ZIPC1_UKTJ

£40,000 - £60,000 OTE (comprising of salary, bonus, overtime & callout rates)Uncapped bonus scheme, including Overtime & Call-out ratesMobile role Van, Tools & PPE providedMonday to Friday 08.00 17.00, Saturday 08.00 12.00Are you an experienced CommercialVehicle Tyre Fitter looking for the next step in your career? If so, then look no further - apply today to the UKs largest Automotive service, maintenance and repair business. We offer great career opportunities, benefits, and an uncapped bonus scheme!Key duties include:Fit/repair tyres including car, van, truck, agricultural, industrial and earthmover roadside & in depotProvide an exceptional customer service experienceAccurately complete all relevant paperwork and electronic job sheets.Halfords Commercial Fleet Services (HCFS) is the UK's largest CommercialVehicle Tyre service provider. As part of the Halfords Group, HCFS was formed by acquiring three large entities: Lodge, McConechys, and Universal, alongside some previous independent tyre management services enabling us to offer nationwide coverage for our customers.Benefits Include:Up to 50% off garage bills in our Autocentres and 25% off most our Halfords products in our retail storesDiscounts on everything from groceries, shopping, insurance, days out, restaurants and moreOpportunity to buy a Trade Price Bike & enrol in the Cycle to Work SchemeFinancial planning support via Wagestream - access up to 30% of your salary in advanceJoin the Share save scheme with a 20% discount on sharesHealth Cash Plan to access wellbeing services and claim back healthcare costsPension Scheme & Life AssuranceSkills & Experience:REACT Licence to work safely at the roadsidePossess a full, current driving licenceRTRT and/or LCTT licences or equivalentMinimum 1 year experience as a Commercial Tyre Technician or similarWilling and able to work with heavy machinery and equipment in an outdoor environment.Not sure you meet all the criteria? We'd encourage you to take the wheel and apply anyway! At Halfords we are committed to creating an inclusive workplace for our colleagues. We're an equal opportunities employer and proud to welcome applications from all backgrounds and embrace diversity within our one Halfords Family.TPBN1_UKTJ

11877 – 40 hour Dispensing Technician – Permanent ContractWe are looking to recruit a 40 hour Dispensing Technician to work at our 021 branch located at 12/13 Marian Square, Bootle, Liverpool, L30 5QA .The proposed shift pattern is as follows:Monday 09:00 - 18:00 ( 1 hour unpaid lunch break)Tuesday 09:00 - 18:00 (1 hour unpaid lunch break)Wednesday 09:00 - 18:00 (1 hour unpaid lunch break)Thursday 09:00 - 18:00 (1 hour unpaid lunch break)Friday 09:00 - 18:00 (1 hour unpaid lunch break)As a Dispensing Technician you will have successfully completed the NVQ/QCF Level 3 equivalent qualification in Pharmacy Services and be registered with the General Pharmaceutical Council. You will have the knowledge and experience to be a multi skilled Dispensing Technician, taking responsible for providing an efficient, knowledgeable and friendly service to our customers, with specific responsibility for carrying out dispensing duties.You will be a senior member of the dispensing team and will be responsible for receiving, assembling and dispensing prescriptions, advising customers on alternative medicine or care needs where appropriate. You will also have specific accountability for dealing with complex medication enquires on behalf of and under the supervision of a pharmacist.As a trusted healthcare professional, you will be friendly, organised and customer focused with a real passion for people and pharmacy break)operations. Skills in planning, attention to detail and working under pressure are all key in this position.The successful candidate must be willing to support the branch by promoting new services and products as required.You must be confident to build customer relationships and have the ability to establish their needs. You will be expected to provide friendly advice, whist having excellent product knowledge and services. You must also have the drive and enthusiasm to want to coach others to do the same.The utmost attention to detail is required in this role along with the ability to work under pressure and to strict deadlines.The successful candidate must have great people skills as this is paramount to your role. You will be required to work as part of a well-established team and ensure our customers receive a high standard of service.If successful, additional benefits for you could include: Discretionary bonus schemeEAP Provided by BUPA4 weeks' paid holiday, plus statutory holidays, which increase with service. (pro-rata for part time employees)Pension contributionsStaff discountRegulatory training where requiredFree uniformIf you think this role is right for you, please apply, we would love to have you as part of the Cohens Family. We are passionate about equal opportunities and welcome a broad diversity of talent to apply.Please note the Cohens Group reserves the right to cease any advertising prior to the published closing date for a role that receives a high number of applications.TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title :Manufacturing Engineering Team Lead Reporting To:Manufacturing Engineering Manager Work Schedule:Onsite Wolverhampton, GBR We are seeking a Manufacturing Engineer Team Lead er to supervise and manage the resource of our Manufacturing Engineer ing Team in the day-to-day running of our machine shop . The successful candidate will be responsible for setting and monitoring workload priorities, individual targets, and offering guidance on best manufacturing practices while leading the shop floor route cause corrective actions .Responsibilities IncludeManage and mentor the Manufacturing Engineer ing team, both shop floor and personnel management.Direct work assignments, scheduling, and review of work in progress.Support personnel actions including performance reviews, and coordination of training and development.Establish and deliver lean processes into the manufacturing environment.Work with the Manufacturing Engineering Manager in identifying key process improvement projects.Create and support the deployment of effective methods and processes based on 3D models for product launch into the manufacturing area.Help e stablish standard times for each operation ensuring minimisation of the 7 wastes.Support Manufacturing Engineer(s) / Technician(s) in the creation, review, and approval of gauging, fixtures, and special tooling.Provide support and technical assistance to other departments on the facility and, at times, globally .Responsible for shop support resource allocation and direct involvement with any support actions.Key Skills and experience:BSc Degree (vocational, professional, or advanced) or equivalent in the field of Mechanical/Production/Manufacturing Engineering /Leadership . (Preferred) .HNC/ HND (vocational, professional, or advanced) or equivalent in the field of Mechanical/Production/Manufacturing Engineering.P rogressive experience (usually post-education) in the field of manufacturing/process engineering .P rogressive experience (usually post-education) in the field Lean methodologies and Zero Defects.Proven previous knowledge of machining practices including but not limited to;Mill/Turn - 5 Axis Milling - Grinding - Gear Cutting - Spark / Wire Eroding - Honing / LappingProven leadership / management qualities including 1 to 1 support, development of training plans and workload resource management.Security ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security.In Return Moog can offer you:You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally.Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options.You Matter at Moog Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.TPBN1_UKTJ

Overview\n \n \nYou step into the bodyshop knowing the job has been prepped properly and the expectations are clear. The vehicle in front of you needs care, focus and skill - and you're trusted to deliver all three. You work alongside people who respect your experience, value quality finishes, and understand that paint is one of the most visible and important stages of the repair.\n \n \nThat's what it's like to ...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Field Service Engineer – Mobile Fleet TechnicianPeemanent day shiftsAre you ready to go on the road and take your technical skills to a dedicated network of customer sites?If so, then this could be the role for you?if you have experience working on a mobile basis, maybe Agricultural or Material Handling equipment, then we would like to speak with you.We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing:CalloutsPreventative MaintenanceEmergency BreakdownsPre-arranged servicing at rural sitesMOT PreparationEngine work and diagnostic investigationsCorrection of running defects?Chassis and fabrication work?Hydraulics and pneumatics?Improvement of vehicle standards?Electrical and wiring inspections and corrections?You will be travelling within a designated area and have use of a fully equipped van.We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completionThe personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible;Reliable and punctualEnthusiastic, proactive and an innovative thinkerAbiding by health and safety rulesA problem solver with a can-do mindsetIn this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV's, Gritters, Refuse Collection Vehicles, Sweepers, Flat Beds and Cherry Pickers.Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required.A Class 2 Licence would be beneficial.Benefits – you will start with 25 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme.If this role isn't for you but you are looking for a move, then please get in touch.Kautec Recruitment is a fast growing automotive people business that recruits the right way.HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.?TPBN1_UKTJ

Are you passionate about cars, love helping customers, and enjoy working independently? Join Halfords as a Mobile Technician and bring your skills directly to our customers driveways.£29,995.68 - £31,025.28 per annum + bonus44 hour weekShift pattern between Monday - Sunday including every weekend 8:00 - 20:00 flexible with your choice of 2 weekdays to work alongside the weekend shiftsAs a Mobile Technician, youll use your technical knowledge, problem-solving ability and customer service skills to keep our customers moving. After collecting your fully equipped van from the local Hub, youll be guided through your route by our smart technology, carrying out a wide range of repairs and services for our customers.With full training provided for any gaps in your skill set, you can expect to carry out the following work, day-to-day:Tyre fittingDash-cam fittingBattery replacementAir-con servicesWindscreen repairsOil & filter changesTow-bar fittingWere in an exciting chapter rapidly growing our business with a focus on motoring services and electric mobility. Were the UKs leading retailer of motoring and cycling products and services, and the UKs largest Automotive service, maintenance, and repair business. Join us and be part of our success story in getting the nation safely back on the move.Benefits Include:5.6 weeks annual leaveUp to 50% off garage bills in our Autocentres and 25% off most our Halfords products in our retail storesDiscounts on everything from groceries, shopping, insurance, days out, restaurants and moreFamily & Friends Discount EventsOpportunity to buy a Trade Price Bike & enrol in the Cycle to Work SchemeFinancial planning support via Wagestream - access up to 30% of your salary in advanceGP Access, 364 days a year, 24 hours a dayJoin the Share save scheme with a 20% discount on sharesHealth Cash Plan to access wellbeing services and claim back healthcare costsPension Scheme & Life AssuranceSkills and experiencePrevious experience as a Tyre Fitter or in other vehicle repair work is highly desirableStrong customer service skills & experienceAbility to problem-solve and work on own initiativeThis role will suit those with a real passion for all things cars & motoringA current valid driving licence with no more than 6 pointsNot sure you meet all the criteria? We'd encourage you to take the wheel and apply anyway! At Halfords we are committed to creating an inclusive workplace for our colleagues. We're an equal opportunities employer and proud to welcome applications from all backgrounds and embrace diversity within our one Halfords Family.TPBN1_UKTJ

Electrical Maintenance TechnicianWolverhamptonPermanentUp to £45,000 per annum + OvertimeMonday to Friday DAYS (early finish on a Friday)This is an amazing opportunity to join a growing business in the Wolverhampton area who offer a fantastic environment to work in and be surrounded by a great team of people. The company offer a great work-life balance working days Monday to Friday, with an early finish every Friday. This is a great opportunity to work in a business where you will feel valued as an employee and the training and development available is a major bonus, along with the attractive pension and medical care. This role is working for a well-established manufacturing business, who have a phenomenal track record with quality and service awards. Our client is also open to seeing trainee candidates who have completed education or an apprenticeship and have attained 18 th edition electrical wiring regulations.The Electrical Maintenance Technician will be responsible for:Supporting the preventative and reactive maintenance functionWorking on small projects within the maintenance teamInstall, repair, calibrate and test all electrical equipment and instruments on-siteWorking to IEE wiring regsWorking on single and 3 phase equipment, control circuits, VSD drives, motors and lightingDocumenting all work carried outHigh voltage awareness, PAT Testing, Emergency lighting, CCTV, security and fire alarms, telephone and internet communication productsWorking on control systems and PLCReading drawingsWorking on instruments such as pressure and temperatureInstalling data points for landline and internetSkills and Experience:Must have 17 th or 18 th edition electric qualificationsPrevious experience working on industrial electricsKnowledge of Siemens PLCs would be advantageousOR recent Apprentice or Electrical qualification graduateChemical knowledge and awareness would be an advantageThe right candidate will be eager to learn, a self-starter who is accountableThis role would suit a candidate who has previously worked as: Electrical Engineer / Electrical Maintenance / Maintenance Engineer / Multiskilled Engineer / Electrician / Industrial Electrician / Electrical Installation / Trainee Electrical Engineer / Apprentice EngineerThe application process:Our mission is to support our clients in their creation of an equal, diverse and inclusive workforce. We are committed to providing a barrier-free recruitment process, so if you require any reasonable accessibility adjustments within the application process, then please make it known at the earliest opportunity.We will carefully consider your details and advise you if we're able to progress with your application within 72 working hours. If you do not hear from us within this time your details wont be retained. So, if you're not successful on this occasion, do continue to respond to future roles we advertise. In the meantime, all good wishes and continued success with your search for employment.About UsPrince Personnel are an employment agency working on behalf of our client.Whether youre seeking a new permanent position, temporary assignment or contract youll find us easy to deal with.Located in thriving Telford, we focus on jobs in Shropshire, Staffordshire and North Wales.Prince Personnel specialise in commercial, accounts and finance and technical recruitment.With the best jobs around we are an independent agency working hard for you.Reference: AA27011TPBN1_UKTJ

Field Service Technician (Industrial) \n £32,000 - £36,000 + Company Van + Training + Company Benefits \n Walsall \n Are you Field Service Technician from an industrial background, looking to join a new industry with a market-leading company providing an array of training, including on pumps, pneumatics, and industrial fans? \n Are you looking for an opportunity to explore the UK as you visit sites ranging from the across England, up to Scotland, and across to Northern Ireland? \n In this role you will be visiting sites to perform planned preventative maintenance on an array of electromechanical equipment. This role involves fault finding and problem solving on equipment with ample opportunities to work away in a provided van. \n Founded nearly 60 years ago, this tight-knit company prides itself on providing high-quality manufacturing services within a niche industry, whilst maintaining a friendly environment where you will be more than just a number. \n This role would suit a Field Service Technician from a Mechanical background, who is looking to explore the UK whilst diagnosing and resolving electromechanical faults, whilst acting as the primary point of contact for customers during site visits. \n The Role: \n\n • Service and maintenance on electromechanical equipment\n, • Working on pneumatics, pumps, industrial fans, HVAC units\n, • Be point of contact for clients, scheduling site visits, and organising materials\n\n\n, • 40 hours a week, 9 - 5, Monday - Friday, flexible hours\n\n The Person: \n\n • Field Service Technician\n, • Industrial background\n\n Reference number: BBBH26549 \n Mechanical, Manufacturing, Chemical, Industrial, Pharmaceutical, Engineering, Engineer, Walsall, Chemical, Water, Waste, Birmingham, West Midlands, Electromechanical, Electrical, Electric, Field Service, Plastic \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. \n

Maintenance Fitter (Multiskilled / Days)£40,000 - £k OTE) + Days Based + Monday to Friday + Progress to Senior Engineer + Generous Overtime + Flexible working hoursBilston, West Midlands \n Are you a Multi-skilled Maintenance Fitter or similar looking for days-based role with flexible working hours, where you will be able to advance your career into a Senior Engineer role? \n In this role you will be working preventively and reactively, in a role split 50 / 50 between mechanical and electrical, working on a range of equipment which uses AC three-phase motors, overhead cranes, pickers, drives and chains. You will also be working on some basic PLC systems and receive a range of training to make you an expert. \n This company was founded nearly 200 years ago and has developed into a leader within their industry with multiple sites across the UK, carrying out work globally. Due to the high demand of this industry and recent growth, this role will be crucial in implementing a standardised maintenance system across all sites. \n This role would suit a Multiskilled Maintenance Fitter or similar, with a minimum level 2 electrical qualification, looking for a days only role where you can progress to become a Senior Engineer. \n The Role \n\n • Reactive and Preventative maintenance of bespoke manufacturing machinery\n, • Working on AC three-phase motors and various mechanical equipment\n, • Flexi time based on Monday to Friday from 8:00am to 4:00pm\n\n The Person \n\n • Multi-skilled fitter\n, • Level 2 electrical qualification\n\n Reference Number: BBBH26538 \n Engineering, Engineer, Electrical, Maintenance, Manufacturing, Machinery, Fitter, PLC, Fault, Finding, Automation, Repair, Service, Technician, Static, Workshop, Bilston, Wolverhampton, Birmingham \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

11876 – 40 hour Qualified Pharmacy Checking Technician - Permanent contractWe are looking to recruit a 40-hour Qualified Checking Technician to work at our 021-branch located at 12/13 Marian Square, Bootle, Liverpool, L30 5QA.The proposed shift pattern is:Monday 09:00 - 18:00 (1 hour unpaid lunch break)Tuesday 09:00 - 18:00 (1 hour unpaid lunch break)Wednesday 09:00 - 18:00 (1 hour unpaid lunch break)Thursday 09:00 - 18:00 (1 hour unpaid lunch break)Friday 09:00 - 18:00 (1 hour unpaid lunch break)As a Qualified Pharmacy Checking Technician you will lead the dispensing activities through dispensing and checking prescription items quickly and accurately. You will also be responsible for ensuring that our high standards of customer care and services are maintained throughout the branch.You must be confident in building customer relationships, establishing their needs, providing friendly advice and excellent product knowledge and services. You must also have the drive and enthusiasm to want to coach others in your branch to do the same.The utmost attention to detail is required in this role along with the ability to work under pressure and to strict deadlines.You must have a passion for Pharmacy, in order to drive the business forward and have great people skills, as this is paramount to your role.Proof of your completion of the Accuracy Checking Course (ACT Qualification) and registration with the GPhC is essential.Here at Cohens we are proud to offer each of our team members with great rewards and benefits.When you join Cohens as a new member of our team, you will automatically gain access to a platform of discounts and savings with other retailers, restaurants, leisure providers. This scheme has been designed with you and our existing team members in mind, to provide all our employees with various rewards and benefits to Get Fit, Save Money and Feel Great.The successful candidate must have great people skills as this is paramount to your role. You will be required to work as part of a well-established team and ensure our customers receive a high standard of service.If successful, additional benefits for you could include: Discretionary bonus schemeEAP Provided by BUPA4 weeks' paid holiday, plus statutory holidays, which increase with service. (pro-rata for part time employees)Pension contributionsStaff discountRegulatory training where requiredFree uniformIf you think this role is right for you, please apply, we would love to have you as part of the Cohens Family. We are passionate about equal opportunities and welcome a broad diversity of talent to apply.Please note the Cohens Group reserves the right to cease any advertising prior to the published closing date for a role that receives a high number of applications.TPBN1_UKTJ

PSV Engineer | Days & Nights Available | £21.00 - £22.50ph + Benefits | TividalePSV Engineer jobs, Bus Engineer jobs, HGV Technician jobs, PCV Engineer jobs, Fleet Engineer jobs, Vehicle Technician jobs, Heavy Vehicle Technician jobs.£21.00 - £22.50 per hour depending on shift and experience, with opportunities for both day and night shift engineers.Day and night shift opportunities available:- Nights: 22:00 - 06:30, working any 5 days over 7 including weekend cover.- Days: 07:00 - 15:30, Monday-Friday with every other Saturday.Join a successful and established passenger transport operator with a modern PSV fleet, a strong engineering team and a commitment to maintaining safe, reliable and high-quality vehicles.Your background as a PSV Engineer:Experienced working on PSV, HGV, commercial vehicles or similar heavy vehicle equipment .Strong mechanical knowledge with experience carrying out inspections, servicing, diagnostics and repairs.Level 3 Heavy Vehicle qualification (NVQ/City & Guilds or equivalent) advantageous.Comfortable working independently and taking ownership of vehicle maintenance and fault finding.A reliable and safety-focused engineer with a commitment to high standards.B/B1 licence ideal & own basic tools essential.PSV licence advantageous but not essential for the day role.PSV Engineer Responsibilities:Carry out servicing, inspections, repairs and preventative maintenance across a PSV fleet.Diagnose and rectify mechanical, electrical and technical faults.Complete safety inspections, defect repairs and prepare vehicles for MOT.Ensure vehicles meet legal and company standards while minimising downtime.Maintain accurate engineering records and paperwork.Work closely with the engineering team to maximise fleet availability.Support breakdown response and maintain a safe, clean and organised workshop.This PSV Engineer role is commutable from Tividale, Oldbury, Dudley, West Bromwich, Birmingham, Smethwick, Wednesbury, Wolverhampton and surrounding areas.Please note that if you are not contacted within the next ten days then your application, on this occasion, has not been successful. We thank you for taking the time to apply.TPBN1_UKTJ

Job title:Mechanical Maintenance Technician - Submarines (Dockside)Job Type:PermanentStart date:ASAPSalary Range:65-75,000 + Benefits Location:Wolverhampton and Dockside Full Site Based/Hybrid/Remote Working:Full Site BasedHours of work:40 hours per week (with overtime and occasional shift work as r