Trabajos slough en GreenfordCrear alertas

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Slough cluster, covering areas like Slough, Windsor, Maidenhead, Marlow, High Wycombe, Beaconsfield, Gerrards Cross. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Roadside Technician Join the team that keeps the UK moving. As a Roadside Technician with a Level 2 Light Vehicle Maintenance qualification (or equilavent) and at least 2 years' experience, you’ll receive: • A market-competitive base salary of £41,600 (inclusive of London Weighting Allowance, if applicable) and a realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates., • Start and finish on your driveway. Demand-led shifts averaging 40 hours per week, with optional overtime available. Where you’ll work You’ll be part of the Slough cluster, covering areas like Slough, Windsor, Maidenhead, Marlow, High Wycombe, Beaconsfield, Gerrards Cross. We organise work locally so you can start and finish at home, focusing your day on getting members back on the road in your local area. What you’ll need: • A Level 2 light vehicle maintenance qualification (or equivalent), with at least 2 years' post-qualification technical, electrical, and diagnostic experience, • A customer-focused approach, • A full UK driving licence As a Roadside Technician within our Patrol division, you’ll deliver expert mechanical roadside repair, vehicle diagnostics, and emergency breakdown support across the UK. Whether it’s a flat battery, tyre change, or complex fault-finding, you’ll provide quick, confident solutions and reassurance when our members need it most. You’ll start and end your day at home, tackling challenges head-on and making a real impact on the roadside - combining your technical expertise with outstanding member service. We’ll set you up for success from day one, with your own RAC van, fuel card, full uniform, essential tools, and diagnostic kit all provided. The RAC has been a trusted name for over 125 years, combining heritage with innovation. If you're looking for a career in roadside automotive services that’s rewarding, fast-paced, and full of variety - this is it. No CV required when you apply – it's easier than ever to start your journey with us. As a Roadside Technician at RAC, you’ll get benefits that go the extra mile: • Strong base pay – £41,600 (inclusive of LWA) and realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates, • Share in our success – Join our colleague share scheme for free to benefit from the future growth of the business, • Free RAC Ultimate breakdown cover – From your very first day, • Car salary sacrifice scheme – Includes electric vehicle options (after 12 months) to help you save on tax, • Generous holidays – 23 days plus bank holidays (rising to 25 with service), • Pension & life cover – Up to 6.5% matched pension contributions and life cover up to 4x your salary (10x with flex benefits), • Wellbeing support – 24/7 confidential support helpline for you and your family, • Exclusive discounts – Save on tools, tech, holidays, and more through our Orange Savings portal Sound like your kind of role? Here’s what we’re after: You’re more than a mechanic. You’re a problem solver, a people person, and a proud ambassador for the RAC. Whether you’re on a busy roadside or a quiet cul-de-sac, you stay calm under pressure and confident in your craft. You thrive on variety. One moment it’s fault diagnostics, the next it’s a flat tyre or battery - no two jobs are the same. You’ll be equipped and ready for every call-out, with the tools, tech, and support to get the job done. You think on your feet. You’ll be trusted to think on your feet and make the right call for each customer. Different fixes, different faces, new challenges every day. Why RAC? For more than 128 years, we’ve been keeping drivers moving, and today we’re trusted by over 15 million members. We’re also trusted by our people, with a 4.5-star Glassdoor rating showing that RAC is a place where support, ambition, and opportunity go hand in hand. We welcome people from every background, value every voice, and back your growth every step of the way. At the RAC, you can bring your full self to work and we’ll be with you every step of the way to help you grow and develop your career.

IFA Administrator (Progression To Paraplanner / Advisor) £35,000 - £40,000 + Funded Qualifications + 33 Days Holiday + Hybrid + Flexible Hours + Bonus + Training + Progression Hillingdon Are you an IFA Administrator looking to join a thriving and well-established company, offering tailored in-house training and excellent progression opportunities to Paraplanner and Advisor positions? On offer is the opportunity to join a client focused financial advisers who pride themselves on their bespoke approach to financial advice. They are known for nurturing their employees, offering structured development plans and excellent staff retention. Your role will involve supporting the advisers with all administrative duties including preparing client documentation, processing new business, liaising with providers and maintaining accurate client records. You will work closely with the advisory team, gaining exposure to client meetings. This role offers ultimate work life balance with flexible hours, hybrid working and 33 days holiday. This role would suit an IFA Administrator looking for progression to a Paraplanner or Advisor position, with a company that will value your development through tailored training. The Role IFA administration duties Preparing client documentation and processing new business Supporting advisers and assisting with client servicing 9am-5pm Monday-FridayThe Person IFA Administrator Looking for progression to Paraplanner and Advisor positionsReference Number: BBBH 26249a IFA Administrator, Financial Services Administrator, Wealth Management, Level 4 Diploma, Financial Adviser, Finance, Hillingdon, Uxbridge, Ealing, Harrow, Slough If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

CNC Machine Shop Supervisor | 4-Day Week | 36hrs Basic with Progression 📍 Hayes, West London Easily commutable from: Uxbridge, Southall, Greenford, Hounslow, Heathrow, West Drayton, Northolt, Ruislip, Ealing, Feltham, Slough and surrounding areas. 💰 Highly Competitive Salary (DOE) 🕒 Monday – Thursday | 4:00pm – 12:00am ⏰ 36 Hour Basic Week 🏖️ Three-Day Weekend Every Week Ready to take the next step in your machining career? I'm recruiting on behalf of a growing aerospace precision company looking for a hands-on CNC Supervisor to help drive production whilst remaining actively involved on the shop floor. They continue to invest heavily in both their people and equipment, creating a clean, modern working environment where engineers are trusted, valued and encouraged to contribute ideas that improve production. This isn't an office-based management position. You'll still be programming, setting and supporting production whilst becoming the experienced engineer the team naturally turns to for technical support, guidance and day-to-day decision making. If you're already the person colleagues come to when they need help proving out a job, solving machining problems or making production decisions, this could be the perfect opportunity to step into a leadership role without moving away from the machines. The Role Working closely with the Foreman, you'll help ensure production runs smoothly throughout the day whilst leading by example on the shop floor. You'll spend your first couple of weeks learning the business, understanding how production operates and getting to know the team before gradually taking ownership of the department. You'll become the main point of contact during your shift, supporting Setter Operators, helping solve technical challenges and ensuring work continues to flow efficiently. Alongside your machining responsibilities, you'll also act as one of the site's trained First Aiders and play an important role in maintaining the smooth day-to-day running of the machine shop. Key Responsibilities Leading a team of skilled CNC Setter Operators. Remaining hands-on with programming, setting and machining. Supporting production planning and workflow. Acting as the first point of contact for technical support on shift. Mentoring and supporting less experienced machinists. Working closely with the Foreman to keep production running efficiently. Ensuring quality, safety and housekeeping standards are maintained. Supporting continuous improvement across the machine shop. Acting as one of the site's trained First Aiders (training can be provided if required). What We're Looking For We're looking for someone who naturally takes ownership. Someone who enjoys helping others, keeps production moving and leads by example rather than simply managing from the sidelines. You may already be working as a: CNC Team Leader Lead CNC Machinist Senior CNC Programmer Setter Operator Cell Leader Senior Setter Operator Or you may simply be an experienced machinist who's ready to take that next step. Experience with either of the following would be highly advantageous: CNC Milling Centres and/or Multi-Axis CNC Turning Centres / Lathes What's On Offer ✅ Four-day working week (Monday–Thursday) ✅ Days only ✅ 36-hour basic working week ✅ Highly competitive salary ✅ Optional overtime available ✅ Modern, clean and well-organised machine shop ✅ Friendly and highly skilled engineering team ✅ Genuine autonomy and responsibility ✅ Opportunity to become the go-to engineer within the department ✅ Work closely alongside experienced management ✅ Influence machining strategies and continuous improvement projects ✅ Long-term progression within an expanding precision engineering business

Electro-Mechanical Engineer (Full Training + £70K OTE + Signing Bonus) £60,000 Base + £70,000 OTE + Premium Overtime + £1,500 Signing Bonus + Industry-Leading Benefits + Enhanced Pension + Structured Career Progression + 37 Hour Week Hounslow ( Commutable from: Richmond, Heathrow, Twickenham, Hayes, Slough, Woking, Bracknell, Wokingham ) Ex-Forces Candidates Strongly Encouraged to Apply Are you a multi-skilled Electro-Mechanical Engineer looking to maximise your earnings, develop cutting-edge technical skills, and secure a long-term career with a market-leading organisation? This is a rare opportunity to join a nationally recognised, blue-chip company that invests heavily in its engineers through industry-leading training, clear progression pathways, and access to state-of-the-art automated machinery. With a strong reputation for employee retention and internal promotion, this business is continuing to grow and is now expanding its engineering team. You'll be joining a highly skilled team within a modern, clean, and technically advanced environment. In this role, you will play a key part in maintaining production performance through a mix of reactive and planned maintenance, working on advanced equipment and continuously developing your skillset. This position is ideal for an ambitious engineer looking to increase earnings through overtime, gain specialist training, and progress into senior or supervisory roles within a forward-thinking company. The Role: Reactive and planned maintenance across modern production systems Work on advanced, automated machinery within a clean environment Ongoing technical training and clear routes for progression Shift Pattern - Days / Nights (premium rates available)The Person: Multi-skilled Electro-Mechanical Engineer Engineering qualifications (essential) Ambitious and motivated to maximise earnings and career development BBBH (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Tom at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Paint Sprayer Location: Near Uxbridge (commutable from Uxbridge, Slough, High Wycombe, Watford, Hemel Hempstead, Rickmansworth, Gerrards Cross, Hayes, Harrow and surrounding areas) Salary: £43,500 per annum (including 22.6% shift uplift) Start Date: ASAP (notice periods considered) This role would suit candidates with experience in industrial, aerospace or automotive paint spraying, powder coating or precision finishing who take pride in producing high-quality work to exacting standards. Even someone from a Modelmaking background would be considered. Syntech Recruitment is working exclusively with a highly respected UK aerospace and defence manufacturer, known for producing safety-critical, life-saving equipment. This is an excellent opportunity to join a clean, modern manufacturing facility offering long-term stability, excellent benefits and genuine career progression. As a Paint Sprayer, you'll play a key role in preparing, masking, spraying and inspecting precision-engineered aerospace components, ensuring every product meets the highest quality and safety standards. Shift Pattern Double Days (alternating weekly) Week 1: 6:00am – 2:00pm Week 2: 2:00pm – 10:00pm Paint Sprayer – Benefits £43,500 annual salary including 22.5% shift uplift Non-contributory pension (9%) Healthcare plan & life assurance Annual bonus (1–3% of salary, including overtime) 25 days holiday plus bank holidays Overtime opportunities available Subsidised canteen Cycle to Work Scheme Additional holiday purchase scheme Paint Sprayer – Responsibilities Preparing and cleaning component surfaces prior to painting Applying primers, topcoats, gloss, matt, lacquer and specialist coatings using spray equipment Masking components using tapes, plugs and bungs to engineering drawings Setting and operating curing ovens to specified temperatures and durations Unmasking finished components and carrying out touch-up work where required Inspecting painted components for quality, coverage and defects Measuring paint thickness and gloss levels to specification Maintaining spray equipment, paint booths and work areas Paint Sprayer – Requirements Previous experience in industrial, aerospace, automotive or manufacturing paint spraying Strong surface preparation and precision finishing experience Ability to read and interpret engineering drawings and specifications Understanding of paint application processes and quality standards Knowledge of COSHH and the safe handling of paints and chemicals Experience using hand tools and measuring equipment Comfortable working alternating shift patterns * Strong attention to detail and commitment to producing high-quality work Simply apply today to speak with one of our consultants. All candidates will be required to complete baseline security vetting (BPSS) prior to employment commencing. Syntech Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this position, you acknowledge that your personal data will be processed in accordance with our Privacy Policy

Junior Paraplanner (Progression to Financial Advisor) £30,000 - £35,000 + 33 Days Holiday + Hybrid + Bonus + Flexible Hours + Progression + Training Hillingdon Are you a Junior Paraplanner looking to join a well-established IFA which will offer you, tailored in house training by Financial Advisors, full study support to become chartered, and clear progression routes to become a qualified Paraplanner or Financial Advisor? In this role you will be conducting paraplanning activities to support the advisors. This will include gathering data, researching, preparing suitability reports, ensuring client files and records are accurate and correct and supporting advisors in developing strategies. On offer is the opportunity to join a client focused financial advisers who pride themselves on their bespoke and holistic approach to financial advice. They are known for looking after their staff. They offer clear routes to advisor, which has led to great staff retention. This role would suit a Junior Paraplanner looking to work for a company that will invest in their employees and value their development by providing support and progression opportunities. The Role Producing Suitability reports Undertake technical research and analysis to support client recommendations Ensuring client files and records are updated correctly Support advisors in developing financial strategies Progression to Advisor and chartership support Monday-Friday, 9am-5pm, 37.5 hours per weekThe Person Junior Paraplanner Looking to progress to a fully qualified Paraplanner of Financial AdvisorReference Number: BBBH 26236b Paraplanning, Research, Suitability, Hybrid, Financial, Advisor, Wealth Management, Finance, Financial, Chartership, Hillingdon, Uxbridge, Ealing, Hounslow, Gerards Cross, Slough If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Junior Lift Technician Lift Tester, Senior Lift Engineer Hammersmith, West London Basic Salary: £60,000 - £65,000 + overtime + benefits Benefits: £400/week standby allowance, Overtime: Monday to Friday: 1.5x pay rate; Weekends & Bank Holidays: 2x pay rate, new van + all travel expenses paid, 25 days holiday + bank holidays, NVQ 4 training. Marmon Lift Recruitment is now recruiting for a Junior Lift Technician to cover a well-established route across West London, working on a varied portfolio of passenger and goods lifts. This is an excellent opportunity for an experienced Lift Engineer to take the next step into a technical specialist role. You'll receive fully funded NVQ Level 4 training while developing advanced testing, fault-finding, and diagnostic skills alongside experienced technicians. Joining a nationally recognised lift engineering business with an excellent reputation for developing its people, you'll benefit from ongoing technical support, genuine career progression, and the opportunity to become a recognised technical expert while continuing to earn an excellent salary and overtime. Commutable from: Richmond, Wimbledon, Ealing, Uxbridge, Streatham, Hammersmith, Harrow, Mitcham, Twickenham, Hayes, Slough, Staines-upon-Thames, and London areas. Ideal Junior Lift Technician: NVQ Level 3 in Lift Engineering - Essential Full, clean driving licence - Essential At least 5 years of proven experience within lift engineering, ideally in a technical or senior field-based role Strong diagnostic and fault-finding skills Confident in supervising and supporting other engineers Responsibilities of a Junior Lift Technician: Maintain accurate records of maintenance, repairs, and test reports Attend to and resolve breakdowns and faults across passenger and goods lifts Provide technical support with fault-finding and complex issues Recommend and implement improvements to lifting operational procedures Supervise lift engineering and technical staff, ensuring adherence to health & safety standards Deliver a high standard of customer service and promote operational excellence Apply to this Junior Lift Technician position: For a confidential conversation, call (phone number removed) (Monday - Friday) Ping us your CV by email - Marmon Lift Recruitment is passionate about understanding what truly matters in your next move before you begin an application or interview process. This commitment to you will ensure we represent your best interests at all times, and together we can secure your next move in the passenger lift industry

CNC Machinist (Programmer or Miller or Turner) -- Flexible roles with progression available 📍 Hayes, West London 💰 Highly Competitive Pay + Optional Overtime 🕒 4-Day Working Week 🔧 CNC Turning OR CNC Milling Backgrounds Considered I'm recruiting on behalf of a well-established Aerospace firm in Hayes who are preparing for significant expansion over the coming months. With a healthy order book, consistent long-term work and further growth expected, they're now looking to add several skilled CNC Machinists to their existing team. They're interested in speaking with experienced machinists from either CNC Turning or CNC Milling backgrounds – particularly people who can confidently set machines, understand the machining process and take ownership of their work. This is a permanent, long-term opportunity within a busy engineering business that's investing in its people and continuing to grow. The Role You'll join an experienced machining team within a clean, modern and well-organised engineering environment, producing a mixture of precision components across one-offs, small batches and repeat production work. Depending on your background, you'll work predominantly across either CNC lathes or CNC milling centres. They're not looking for basic machine operators. They need capable machinists who can independently set jobs, understand tooling and offsets, read engineering drawings, maintain quality and keep production moving. If you're already programming, even better – but you don't need to be a full CNC Programmer to be considered. Strong Setter Operators are absolutely encouraged to apply. What We're Looking For We'd be interested in speaking with: CNC Setter Operators CNC Turners CNC Millers CNC Machinists CNC Programmer Setter Operators Multi-Axis Machinists You'll ideally be confident with: Setting CNC machinery independently Reading and interpreting engineering drawings Setting tooling and offsets Producing components to tight tolerances Carrying out first-off and in-process inspection Making adjustments to maintain component quality Identifying and resolving machining issues Working independently without constant supervision Programming experience is also highly desirable, but not essential for every position. Why Consider Moving? Long-Term Stability: They're recruiting because of growth and workload, with a healthy order book and steady, consistent work driving the need for additional permanent machinists. Highly Competitive Pay: Good CNC machinists are difficult to find, and the company understands the value of experienced people. Salary will reflect your actual machining capability and experience. Optional Overtime: Want to earn more? Additional hours are available. Don't want them? You're not relying on overtime to make the role worthwhile. Modern Working Environment: A clean, organised machine shop with good equipment and an experienced engineering team around you. Genuine Progression: As the company expands, there will be opportunities for strong machinists to develop technically, broaden their machining capabilities and take on additional responsibility. Join During a Period of Growth They're not simply replacing somebody who's left. The machining team is being expanded to support the amount of work currently coming through the business and its plans for further growth. Location Based in Hayes, West London, with good access from: Uxbridge | Southall | West Drayton | Hounslow | Heathrow | Greenford | Northolt | Ealing | Ruislip | Feltham | Slough | Watford | High Wycombe etc The site is accessible by car, public transport and cycle, making it a realistic commute from a number of West London and surrounding areas. Already Happily Employed? That's absolutely fine. If you're not actively job hunting but you're simply curious about the pay, machines, 4-day working week or progression available, I'm happy to have a confidential conversation before you decide whether it's worth taking things any further. There's no expectation to commit to anything simply by having a conversation. Interested? If you're a skilled CNC Setter, Turner, Miller or Programmer and would consider joining a stable, growing engineering company offering a four-day week, competitive pay and genuine long-term prospects, apply today for a confidential discussion

Pipes Assembly Operative Location: Near Uxbridge (commutable from Uxbridge, Slough, High Wycombe, Watford, Hemel Hempstead, Rickmansworth, Gerrards Cross, Hayes, Harrow and surrounding areas) Salary: £35,500 starting salary (£18.45ph) Start Date: ASAP (notice periods considered) This role would suit candidates with experience in pipe assembly, pipe bending, tube manipulation, mechanical assembly, fabrication or general manufacturing engineering who are confident working from engineering drawings and producing precision components to tight tolerances. Syntech Recruitment is working exclusively with a highly respected UK aerospace and defence manufacturer, known for producing safety-critical, life-saving equipment. This is an excellent opportunity to join a clean, modern manufacturing facility offering long-term stability, excellent benefits, and genuine career progression. As a Pipes Assembly Operative, you'll play a key role in manufacturing and assembling precision pipework used within world-leading aerospace products where quality and accuracy are critical. Working Hours Monday to Thursday: 8:00am – 5:00pm Friday: 8:00am – 12:00pm Overtime available daily at 1.5x basic rate (£27.50ph) Pipes Assembly Operative – Benefits £35,500 starting salary Early finish every Friday Overtime paid at enhanced rates Non-contributory pension (9%) Healthcare plan & life assurance Annual bonus (1–3% of salary, including overtime) 25 days holiday plus bank holidays Clean, modern manufacturing environment Pipes Assembly Operative – Responsibilities Manufacturing and assembling precision pipework for aerospace applications Setting and operating specialist pipe bending machinery Hand-forming and fitting pipes using form blocks and measuring equipment Cutting pipes using electric saws and associated equipment Working from engineering drawings, specifications and build instructions Forming and adjusting pipework to precise dimensional tolerances Using measuring equipment including verniers and calipers to verify quality Carrying out self-inspection throughout the manufacturing process Pipes Assembly Operative – Requirements Previous experience within a manufacturing or engineering environment Experience in mechanical assembly, pipe assembly, pipe bending, fabrication or similar engineering roles Ability to read and interpret engineering drawings Experience using engineering hand tools including torque wrenches Competent using inspection equipment such as verniers and calipers Strong attention to detail and commitment to producing high-quality work Simply apply today to speak with one of our consultants. All candidates will be required to complete baseline security vetting (BPSS) prior to employment commencing. Syntech Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this position, you acknowledge that your personal data will be processed in accordance with our Privacy Policy

High Care Floor Manager Add Resource and Labour – Southall, Middlesex £40,000 - £45,000 Base (depending on experience) Monday to Friday 25 days holiday + Bank holidays + Pension + Life Assurance The Company…. This well renowned Manufacturing Company is looking to recruit a High Care Floor Manager to assist the successful team in coping with an ever increasing demand of their products and services. In return you can expect an excellent package and to receive ongoing support as well as training and development to ensure you maintain the company’s high standards. To apply for this position, you must have…. 1) Strong experience gained as a High Care Manager OR High Care Supervisor OR experience in High Care ESSENTIAL Candidates suitable for this position can live anywhere in the following locations…. Beaconsfield Brentford Feltham Hayes High Wycombe Hounslow Maidenhead Middlesex Slough Southall Staines-upon-Thames Twickenham Uxbridge Wembley Windsor

Refrigeration Engineer - Manufacturing £45,000 - £55,000 Monday - Friday, 8:00am - 5:30pm | Every Other Saturday - 4-Hour Call Out Southall Are you a Refrigeration Engineer with experience working within a manufacturing environment? Do you hold an F-Gas certification? Are you looking for an exciting new role within an industry leading manufacturing business known for their excellent staff retention and development? Due to continued growth, my client is looking to recruit a Refrigeration Engineer to join their expanding team. The successful candidate will be responsible for the repair, maintenance and fault-finding of air conditioning systems, chillers and freezers. You will also carry out planned preventative maintenance (PPM) on refrigeration units, Air Source Heat Pumps (ASHPs) and ventilation systems. The company is a highly successful and well-established manufacturer at the forefront of its sector and continues to expand across all departments. You will be joining a growing, experienced and supportive team within a business that prides itself on employee retention, professional development and career progression. For further details, please click apply - REFERENCE 5333 The Role Monday - Friday role | Core hours 8:00am - 5:30pm, with flexibility required to work between 6:00am - 10:00pm when necessary | Every other Saturday - 4-hour on-call cover Repair, maintenance and fault-finding on all chillers, freezers and air conditioning systems Installation of air conditioning systems The Candidate F-Gas Certification Knowledge of Air Source Heat Pumps would be advantageous Ability to read and interpret technical drawings Consultant: Alice Holwell Elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Refrigeration Engineer| Chillers| Freezers| Air Conditioning| Manufacturing| ASHP| F-Gas| Southall| Slough | Hounslow | Ealing INDHP

Pump Engineer£45,000 - £55,000 (£55,000 - £60,000 OTE) + Overtime + Door-Door + Company Vehicle + Qualifications + ProgressionHammersmithAre you a Field Service Engineer with a background working on pumps or similar looking for a new role within a multi-division enterprise as it expands it's team offering a great opportunity for progression, with the chance to upskill and continuously develop in a role that offers door-to-door pay and regular overtime?On offer is the chance to join an employee-centred company with proven record of internal promotion. This multi-disciplinary company provide a range of plumbing and heating services across the UK. They are currently expanding and opening a new division within the business.This role will see you going from the yard to site carrying out planned maintenance and repairs, you will also be added to a 1 in 6 call out rota where you will earn a retainer and extra for going onsite. Training will be provided for areas in which you lack knowledge with the appropriate background.This role would suit someone with a background in Pumps /Booster sets/Pressure units or similar looking to step into a new position with a company that provide training and progression .The RoleServicing and maintaining pumps and booster setsGreater London patchThe PersonPumps/Plumbing/Booster sets/Pressure units backgroundCommutable to LondonFull UK driving licenseReference:BBBH24341GKeywords: Pump Engineer, Plumber, Field Service Engineer, Pressure unit, Booster set engineer, Croydon, Enfield, Dartford, Romford, Ealing, Bexley, London, Bishop Stortford, Hertford, Slough, Gravesend, Maintenance Engineer, Kent, Epsom, Watford, Uxbridge, Maintenance engineer, Mechanical Service Engineer, Junior, Senior, Crawley, LondonIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skillset.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our websiteTPBN1_UKTJ

Groundworker / Installation Operative £34,000 - £40,000 + Overtime + Training + Progression + Benefits Hayes, Middlesex (Commutable from: Uxbridge, Slough, West Drayton, Hounslow, Feltham and surrounding areas) Are you from a groundworks/civils background, looking to join a specialist manufacturer who will offer hands on training, future progression, and plenty of overtime to boost earnings? On offer is an excellent opportunity to join a leading company who have a fantastic reputation for looking after their staff, supporting their careers with ongoing training, development opportunities, and a fantastic earning potential. The company are at the forefront of their industry, and have an excellent reputation amongst their customers. Due to their continued growth, they are looking to add to their close-knit field team. In this days-based role, you will travel to various sites around London, and carry out the installation, assembly and maintenance of bus shelters, and other street furniture. There will be occasional overnight work required in the role. This role would suit candidates from a civils/groundworks background, looking for a role offering training, progression, and overtime to boost earnings. The Role: - Installation Operative - Installation & assembly of bus shelters, and other street furniture - Monday to Friday (06:00 to 14:30) + Overtime + Occasional overnight work The Person: - Experienced in groundworks, civil excavations, or engineering - Full UK Driving License - CSCS card or NRSWA qualification Job Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact [Jack Banks] at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Engineering Team Leader London (will look at a good Maintenance Engineer with leadership skills and some experience to step up). AT A GLANCE 4 on 4 off DAYS ONLY - excellent work-life balance Lead a small team of Maintenance Engineers Wembley, North West London Award-winning, highly successful manufacturer Excellent team morale and supportive management Responsibility for people management, contractors and engineering performance Structured career progression Manufacturing background essential Must be UK based with full right to work in the UKTHE OPPORTUNITY Are you an experienced Maintenance Engineer ready to take the next step in your career, or an established Engineering Team Leader looking for your next challenge? We are recruiting for an Engineering Team Leader to join an award-winning manufacturer based in Wembley, North West London. The business is open to both experienced Team Leaders and strong Maintenance Engineers who are ready to step into their first leadership position. The key is having the technical understanding, communication skills and maturity to lead a team effectively. This is a leadership focused role, with responsibility for the day-to-day management and development of the engineering team. THE ROLE You will be responsible for: Leading and supporting a small team of Maintenance Engineers Conducting regular 1-to-1s and annual appraisals Managing individual performance, development and training Setting objectives and supporting engineers with their career development Managing attendance and addressing performance issues where required Coordinating and managing contractors working on site Working with the Engineering Manager to plan engineering resource and priorities Attending management meetings and representing the engineering team Working closely with Production and other departments across the site Monitoring engineering performance, maintenance activity and key KPIs Supporting the delivery of PPM and reactive maintenance programmes Identifying areas for improvement and driving engineering standards Supporting continuous improvement and site engineering projects Ensuring health, safety and engineering procedures are followedABOUT YOU You may already be an Engineering Team Leader, or you could be an experienced Maintenance Engineer looking to make the move into leadership. You will ideally have: Previous Maintenance Engineering experience within a manufacturing or production environment Strong understanding of multi-skilled engineering and maintenance Good electrical and/or mechanical engineering knowledge Excellent communication and interpersonal skills The ability to lead, motivate and develop a team Confidence managing people and handling challenging conversations A professional and organised approach Experience working with contractors or external suppliers The ability to work effectively with Production and senior management A proactive approach to problem solving and continuous improvement A strong understanding of health and safety Full right to work in the UKWHY JOIN? 4 on 4 off DAYS ONLY Excellent work-life balance Genuine opportunity to progress into engineering leadership Award-winning manufacturer with a strong reputation Excellent engineering team and workplace culture Supportive management and clear career progression Stable, successful business with continued investment Opportunity to develop your leadership career within a well-run engineering functionApplication Process If you have the above skills and wish to be considered for this Maintenance Engineer position or find out more details then please contact Simon on (phone number removed) or submit your CV to (url removed) or simply click apply below. Lead Maintenance Engineer is commutable from Watford, Acton, Southall, Slough, Staines, Twickenham, Edgware, Stanmore, Rickamansworth, Hendon, Ruislip, Harrow, Heathrow, Beaconsfield, Amersham, Barnet, Hounslow, Ickenham, Windsor and other parts of Herfordshire, Buckinghamshire and London Why work with Proactive? Proactive Global are an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy

Specification Technologist (Food Manufacturing) Add Resource and Labour – Southall, Middlesex £40,000 - £45,000 Base (depending on experience) Monday to Friday 25 days holiday + Bank holidays + Pension + Life Assurance The Company…. This well renowned Company is looking to recruit a Specification Technologist to assist the successful team in coping with an ever increasing demand of their products and services. In return you can expect an excellent package and to receive ongoing support as well as training and development to ensure you maintain the company’s high standards. To apply for this position, you must have…. 1) Strong experience gained as a Specification Technologist ESSENTIAL Candidates suitable for this position can live anywhere in the following locations…. Beaconsfield Brentford Feltham Hayes High Wycombe Hounslow Maidenhead Middlesex Slough Southall Staines-upon-Thames Twickenham Uxbridge Wembley Windsor

Sales Operations Manager £45,000 - £55,000 + Company Bonus + Progression + Excellent Benefits Hayes, Middlesex (Commutable from: Uxbridge, Slough, West Drayton, Hounslow, Feltham and surrounding areas) Are you a Sales Operations professional, from a Transport, Construction, or public sector sales background, looking to join a market leading UK manufacturer where you can take ownership of the sales pipeline and support long term growth? On offer is an exciting opportunity to join an innovative engineering and manufacturing business, where you will help shape future revenue by identifying, developing and managing a strong pipeline of medium-to-long-term opportunities. This specialist manufacturer has a multi-million-pound turnover and supplies advanced infrastructure solutions across a range of industries, including rail and transport networks. Due to continued expansion, they are looking to appoint a high-calibre Sales Operations Manager to support their ambitious growth plans. In this varied role, you will research and identify new business opportunities, manage and develop the sales pipeline, and work closely with the Business Development team to assess and track potential opportunities. You will also maintain accurate Salesforce records, analyse market trends, and produce reports and forecasts to support future sales growth. This role will suit a Sales operations professional, from a Transport, Construction, or public sector sales background, looking to take the next step in their career with a market leading business that has exciting plans for future growth and career development. The Role: Sales Operations Manager Research & identify new business, manage pipeline Monday to Friday, 8:00am to 4:30pm, on site The Person: Sales Operations experience Confident with data analysis and CRM (strong Salesforce knowledge preferred) Background in Transport, Construction, or public sector Job Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact [Jack Banks] at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Brazer / Welder Location: Near Uxbridge (commutable from Uxbridge, Denham, Slough, High Wycombe, Watford, Hayes, Rickmansworth, Gerrards Cross and surrounding areas) Salary: £35,500 starting salary (£18.45ph on 37 hour week) Start Date: ASAP (notice periods considered) This role would suit candidates with experience in brazing, TIG welding, fabrication or precision engineering who enjoy working on complex assemblies to exacting aerospace standards. Syntech Recruitment is working exclusively with a highly respected UK aerospace and defence manufacturer, known for producing safety-critical, life-saving equipment. This is an excellent opportunity to join a clean, modern manufacturing facility offering long-term stability, excellent benefits and genuine career progression. As a Brazer / Welder, you'll play a key role in manufacturing and repairing precision-engineered components used within world-leading aerospace products, where quality, accuracy and consistency are critical. Working Hours Monday to Thursday: 8:00am – 5:00pm Friday: 8:00am – 12:00pm Overtime available at 1.5x basic rates Brazer / Welder – Benefits £35,500 starting salary Early finish every Friday Overtime paid at enhanced rates Non-contributory pension (9%) Healthcare plan & life assurance Annual bonus (1–3% of salary, including overtime) 25 days holiday plus bank holidays Cycle to Work Scheme Additional holiday purchase scheme Brazer / Welder – Responsibilities Carrying out low-temperature silver brazing and high-temperature brass brazing on pipes, fittings and sub-assemblies Performing arc welding, including TIG welding, on aluminium, stainless steel and mild steel components Working from engineering drawings and manufacturing specifications Setting and operating spot welding equipment Preparing components through deburring, polishing and cleaning processes Carrying out visual inspections and quality checks, including ball bearing testing where required Supporting development work, including proof-of-concept welding activities Assisting with welding and fabrication tasks across production and maintenance when required Brazer / Welder – Requirements Previous experience in brazing and arc welding within an engineering or manufacturing environment TIG welding experience Experience working with aluminium, stainless steel and mild steel Ability to read and interpret engineering drawings Competent using workshop equipment, hand tools and measuring equipment Welding qualifications or certifications would be advantageous Strong attention to detail and commitment to producing high-quality work Simply apply today to speak with one of our consultants. All candidates will be required to complete baseline security vetting (BPSS) prior to employment commencing. Syntech Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this position, you acknowledge that your personal data will be processed in accordance with our Privacy Policy

Do you like to identify, win and then run the project? This Contract Manager role is more than shifting paperwork. You’ll be integral throughout the proposal / tender phase, winning the business and making sure the client receives what they signed up for. Covering London and the surrounding area, you’ll drive the new high end special projects division, identifying key architects and designers who value style luxury and quality. BASIC SALARY: £45,000 - £55,000 BENEFITS: · Commission structure aligned to performance (1/2% on sales) · Full product and technical training · Company pension · 25 days holiday + Bank Holidays + Christmas shutdown (3/4 days) LOCATION: Twickenham (office based) - realistically you'll spend 50% of your time in the showroom / office, and 50% on site, meeting clients, architects, contractors and developers. COMMUTABLE LOCATIONS: West London, Slough, Uxbridge, Ealing, Camberley, Woking, Epsom, Hayes, Wembley, Beaconsfield WE HAVE A GREAT STORY TO TELL! We have built an enviable reputation delivering bespoke fireplace solutions into some of the most impressive residential and commercial properties in the UK. Our projects range from luxury private homes through to hospitality and prestigious commercial environments. The business has a strong heritage, an established reputation and a growing pipeline of opportunities. What we're looking for now is somebody who can help take that growth even further. Not somebody who waits, somebody who gets involved. THE OPPORTUNITY : Contracts Manager, Sales - Interior Design - Luxury Products Most people would describe this as a sales role. They're wrong! Yes, there is sales involved. But if you're purely a salesperson waiting for enquiries to arrive and customers to walk through the door, this probably isn't for you. Because the reality is very different. This is a role built around projects, relationships, commercial awareness and ownership. One day you could be in the showroom discussing a luxury residential project worth £75,000. The next you're meeting an architect, contractor or developer to understand what they're working on and where you can add value. This is about becoming part of the project long before an order is placed, and that means understanding people, drawings, specifications, timelines, budgets and construction projects—not just products. JOB DESCRIPTION: Contracts Manager, Sales - Interior Design - Luxury Products This Contracts Manager role sits right in the middle of sales, project management and stakeholder engagement. One project alone could involve a homeowner, an architect, an interior designer, a contractor, a project manager, our installation team, and they all have different priorities - your job is to bring it all together. You'll manage opportunities from first enquiry through to project award, working with multiple stakeholders to ensure projects move forward commercially and successfully. This isn't transactional selling, it's consultative, it's project-led and ultimately, it's about helping clients deliver exceptional spaces. The purpose of the role is simple: · Identify, develop and convert project opportunities, · Manage project enquiries from first contact through to order confirmation. · Build relationships with architects, interior designers, contractors and developers. · Own projects from initial enquiry through to order. · Work closely with operational and installation teams to ensure successful delivery. · Help grow the Special Projects side of the business. KEY RESPONSBILITIES: Contracts Manager, Sales - Interior Design - Luxury Products · Attending client meetings and site visits. · Working with drawings, specifications and project information. · Producing quotations and proposals. · Representing the business at networking and industry events. · Owning your pipeline and your results. REQUIREMENTS: Contracts Manager, Sales - Interior Design - Luxury Products You do not need specific product experience (we do fireplaces). Experience operating in construction, interiors, fit-out, residential projects or design-led environments is preferred as you will have exposure to architects, contractors, developers and project stakeholders, along with the ability to understand drawings, specifications and project information. · Strong commercial awareness and excellent communication skills. · A proactive mindset and the confidence to create opportunities rather than waiting for them. · Build relationships. · Manage complex projects. · Understand technical detail. · Communicate with different stakeholders. You will most likely be one of the following Contracts Manager, Project Manager, Quantity Surveyor, Estimator, Specification Sales Manager, Technical Sales Consultant, Design & Build Professional or a High-End Interiors Sales Consultant THE COMPANY: You’ll be joining a well-established, specialist business operating within a premium segment, working on projects that genuinely stand out. It’s a close-knit team where collaboration matters, input is valued, and success is visible This isn’t corporate. You won’t be a number. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MH18530, Wallace Hind Selection

Field Service Engineer (Diesel Engines) Reading, Slough, London (M4 Corridor) Up to £47,000 per annum (depending on experience) + Company Van + laptop + mobile + Overtime available Are you an experienced engineer who enjoys working with your customers to solve engineering problems? Do you have the engineering and commercial know-how to effectively represent a global leading brand? If so, you should continue reading… The Company You will be joining an organisation synonymous with engineering excellence, developing leading power generation technology solutions for customers in the marine, construction, agricultural, rail and defence sectors (amongst others). A genuine leader in their field, this company provides comprehensive training for the engineers, to reflect the developing and emerging technology in its product range. Customer relationships are key, hence the Service Engineer we are looking for will have a clear track record of delivering added value services in client facing roles. The Ideal Candidate You will be experienced in both the mechanical and electrical maintenance of diesel engines and / or propulsion systems and associated electrical control technology, ECU’s (Electronic control unit). Qualified to NVQ3 as a minimum you will have demonstrable experience of fault diagnostics and remote diagnostics and conditioning. Working in the customer location that is a highly safety critical environment, you will be required to undertake pre-employment checks including medicals, drug and alcohol screens Due to the nature of the role, we welcome applications from the ex-forces personnel, such as RAF, Royal Navy or British Army, or experienced engineers within Marine, Rail, Automotive, HGV or Bus sector. This is a fantastic opportunity to move your career towards the Rail sector! The Role As the Rail Service Engineer, you’ll be carrying out fault diagnostics on modern diesel engines, downloading data, ECU (Electric Control Unit) familiarity. Fully product training will be provided as Service Engineers are responsible as product experts for ensuring performance and availability for the diesel engines in the rolling stock. Whilst hands on work, at the heart of this role is being able to undertake remote diagnostic work to obtain, evaluate and interpret data to identify likely faults before physically seeing the engine. This represents intermediate fault-finding activity and fault resolution courtesy of effective condition monitoring. The Salary Basic salary up to £47,000 per annum - depending of experience (+ 15% London Allowance must reside inside M25)+ Overtime available + Company Van + Laptop, Mobile Phone. This role is field based, and will be covering the M4 Corridor area, from Reading to London, Working a 4 on 4 off shift basis, (2 Days, 2 Nights) 40 hours a week, 25 Days holiday + BH, Attractive pension scheme, private medical and other big company benefits are offered as standard. If you are passionate about providing exceptional customer service within a Field Service Engineer role and can offer the knowledge and flexibility the role requires, get in touch for immediate interview! Either email your CV to (url removed) or call (phone number removed) to discuss Please note – you must be able to prove eligibility to work in the UK to be considered for this position Ganymede is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Pump Engineer (Field Service)£45,000 - £55,000 (£55,000 - £60,000 OTE) + Overtime + Door-Door + Company Vehicle + Qualifications + ProgressionWembleyAre you a Pump Engineer looking for a new role within a multi-division enterprise as it expands it's team offering a great opportunity for progression, with the chance to upskill and continuously develop in a role that offers door-to-door pay and regular overtime to significantly boost your income?On offer is the chance to join an employee-centred company with proven record of internal promotion. This multi-disciplinary company provide a range of plumbing and heating services across the UK. They are currently expanding and opening a new division within the business.This role will see you going from the yard to site carrying out planned maintenance and repairs, you will also be added to a 1 in 6 call out rota where you will earn a retainer and extra for going onsite. Training will be provided for areas in which you lack knowledge with the appropriate background.This role would suit someone with a background in Pumps /Booster sets/Pressure units or similar looking to step into a new position with a company that provide training and progression .The RoleServicing and maintaining pumps and booster setsGreater London patchThe PersonPumps/Plumbing/Booster sets/Pressure units backgroundCommutable to LondonFull UK driving licenseReference:BBBH24341GKeywords: Pump Engineer, Plumber, Field Service Engineer, Pressure unit, Booster set engineer, Croydon, Enfield, Dartford, Romford, Ealing, Bexley, London, Bishop Stortford, Hertford, Slough, Gravesend, Maintenance Engineer, Kent, Epsom, Watford, Uxbridge, Maintenance engineer, Mechanical Service Engineer, Junior, Senior, Crawley, LondonIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skillset.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our websiteTPBN1_UKTJ

My client is looking for a Groundworker who also has a Dumper ticket to work on a site doing some enabling works in Slough. HOURLY RATE : £24 per hour - CIS LOCATION : Slough (SL1) DATE COMMENCING : ASAP LENGTH OF CONTRACT : 6-7 weeks, possibly longer HOURS OF WORK : · 7:30 - 16:30 · Book 9 hours per day JOB DESCRIPTION : Groundworker, Dumper Operative You will be completing some general groundworks and dumper duties, completing enabling works on a new site in Slough. REQUIREMENTS : Groundworker, Dumper Operative · CPCS / NPORS card · PPE · Previous experience is a MUST PERSON SPECIFICATION : Groundworker, Dumper Operative · UTR to enable CIS Payments · Can communicate well with those already on site and follow instructions given · Can work the 45 hours required per week Please Note : You will be paid via our payroll partner Marvel Payroll, and one of their Account Managers will contact you before you start work. All workers will be paid by CIS. Wallace Hind - Construction Temps, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Ref: Tommy Smith - 18605, Wallace Hind - Construction Temps

Job Title: Water Hygiene Engineer Location: Wembley, Greater London Salary/Benefits: £26k - £36k + Training & Benefits This well-established company is seeking an experienced Water Hygiene Engineer, ideally within the M25, or based with great access to the area. You will be servicing a range of commercial, domestic and industrial sites across the South East of England. Applicants must be able to hit the ground running, undertaking water sampling, tank inspections, acid descales and outlet flushing, among other ACOP L8 compliance tasks. Our client provides a diverse range of compliance services, and have a successful Water Hygiene / Legionella department, therefore they can offer excellent cross-training and development. The successful candidate can expect extensive benefits and competitve salaries for an enthusiastic and diligent individual. Locations that will be considered: Harrow, Watford, Enfield, Ilford, Romford, Billericay, Basildon, Bromley, Dartford, Gravend, Orpington, Croydon, Sutton, Spsom, Kingston upon Thames, Hounslow, Southall, Slough, Maidenhead, Reading, Harlow, Woking, Guildford, Bracknell, Potters Bar, Barnet, Chigwell, Bromley, Erith, Sutton, Purley, Weybridge. Experience / Qualifications: Strong work history as a Water Hygiene Engineer Technical knowledge of ACOP L8 and HG 274 guidelines Adaptable to travel needs Good literacy and numeracy skills Contentious and switched-on Professional liaising with clients Good literacy, numeracy and IT skills The Role: Acid and showerhead descales TMV servicing and repairs Tank inspections, cleans and disinfections Calorifier inspections Water sampling Temperature monitoring Outlet flushing Updating site logbooks Working to set deadlines and project scope Alternative job titles: Water Treatment Engineer, Legionella Operative, Water Service Engineer, Environmental Service Technician. Future Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills. Future Select Copyright 2026

CNC Setter / CNC Machinist -- Flexible roles with progression available 📍 Hayes, West London 💰 Highly Competitive Pay + Optional Overtime 🕒 4-Day Working Week 🔧 CNC Turning OR CNC Milling Backgrounds Considered I'm recruiting on behalf of a well-established Aerospace firm in Hayes who are preparing for significant expansion over the coming months. With a healthy order book, consistent long-term work and further growth expected, they're now looking to add several skilled CNC Machinists to their existing team. They're interested in speaking with experienced machinists from either CNC Turning or CNC Milling backgrounds – particularly people who can confidently set machines, understand the machining process and take ownership of their work. This is a permanent, long-term opportunity within a busy engineering business that's investing in its people and continuing to grow. The Role You'll join an experienced machining team within a clean, modern and well-organised engineering environment, producing a mixture of precision components across one-offs, small batches and repeat production work. Depending on your background, you'll work predominantly across either CNC lathes or CNC milling centres. They're not looking for basic machine operators. They need capable machinists who can independently set jobs, understand tooling and offsets, read engineering drawings, maintain quality and keep production moving. If you're already programming, even better – but you don't need to be a full CNC Programmer to be considered. Strong Setter Operators are absolutely encouraged to apply. What We're Looking For We'd be interested in speaking with: CNC Setter Operators CNC Turners CNC Millers CNC Machinists CNC Programmer Setter Operators Multi-Axis Machinists You'll ideally be confident with: Setting CNC machinery independently Reading and interpreting engineering drawings Setting tooling and offsets Producing components to tight tolerances Carrying out first-off and in-process inspection Making adjustments to maintain component quality Identifying and resolving machining issues Working independently without constant supervision Programming experience is also highly desirable, but not essential for every position. Why Consider Moving? Long-Term Stability: They're recruiting because of growth and workload, with a healthy order book and steady, consistent work driving the need for additional permanent machinists. Highly Competitive Pay: Good CNC machinists are difficult to find, and the company understands the value of experienced people. Salary will reflect your actual machining capability and experience. Optional Overtime: Want to earn more? Additional hours are available. Don't want them? You're not relying on overtime to make the role worthwhile. Modern Working Environment: A clean, organised machine shop with good equipment and an experienced engineering team around you. Genuine Progression: As the company expands, there will be opportunities for strong machinists to develop technically, broaden their machining capabilities and take on additional responsibility. Join During a Period of Growth They're not simply replacing somebody who's left. The machining team is being expanded to support the amount of work currently coming through the business and its plans for further growth. Location Based in Hayes, West London, with good access from: Uxbridge | Southall | West Drayton | Hounslow | Heathrow | Greenford | Northolt | Ealing | Ruislip | Feltham | Slough | Watford | High Wycombe etc The site is accessible by car, public transport and cycle, making it a realistic commute from a number of West London and surrounding areas. Already Happily Employed? That's absolutely fine. If you're not actively job hunting but you're simply curious about the pay, machines, 4-day working week or progression available, I'm happy to have a confidential conversation before you decide whether it's worth taking things any further. There's no expectation to commit to anything simply by having a conversation. Interested? If you're a skilled CNC Setter, Turner, Miller or Programmer and would consider joining a stable, growing engineering company offering a four-day week, competitive pay and genuine long-term prospects, apply today for a confidential discussion

ENGINEERING TEAM LEADER London Monday to Friday DAYS | Hayes - West London | Circa £67,000 | Global Manufacturing Business AT A GLANCE Circa £67,000 Monday to Friday - days Engineering Team Leader position within a large manufacturing site Lead and develop a larger team of Maintenance Engineers Global manufacturing business Well-established and highly successful organisation Strong opportunities for career development and progression Responsibility for people, performance, contractors and engineering delivery Manufacturing experience essential UK based with full right to work in the UKTHE OPPORTUNITY Are you an experienced Engineering Team Leader looking for your next challenge, or an experienced Maintenance Engineer ready to move into engineering leadership? We are working with a global manufacturing business that is looking to appoint an Engineering Team Leader to lead a larger engineering team within a well-established manufacturing operation. This is an excellent opportunity for an Engineering Team Leader who enjoys the people and management side of engineering and wants to take responsibility for a sizeable team within a structured and professional engineering function. The Engineering Team Leader will play a key role in the day-to-day management of the engineering team, ensuring people are developed, maintenance activities are effectively delivered and engineering performance continues to improve. THE ROLE As Engineering Team Leader, you will take responsibility for the performance and development of the engineering team. Key responsibilities will include: Leading, managing and developing a team of Maintenance Engineers Conducting regular 1-to-1s, performance reviews and appraisals Setting objectives and supporting individual development plans Managing performance, attendance and employee relations issues Coaching and developing engineers to improve capability across the team Managing engineering resource and allocating work effectively Working with the Engineering Manager to set departmental priorities Managing contractors and external engineering suppliers Ensuring contractors operate safely and to the required standards Monitoring maintenance performance and key engineering KPIs Supporting the delivery of planned preventative and reactive maintenance Working closely with Production and other departments to maintain equipment availability Attending management meetings and providing updates on engineering performance Supporting root cause analysis and continuous improvement initiatives Identifying opportunities to improve reliability, efficiency and maintenance standards Ensuring engineering policies, procedures and health and safety standards are followed Supporting engineering projects and wider site initiativesABOUT YOU We are open to candidates who are already an experienced Engineering Team Leader, as well as experienced Maintenance Engineers who are ready to take the next step into leadership. You will need: Previous experience within a manufacturing or production environment Strong multi-skilled engineering knowledge Good understanding of electrical and mechanical maintenance Previous experience leading, supervising or developing engineering teams is desirable Strong people management and communication skills Confidence managing performance and having difficult conversations The ability to motivate, coach and develop engineers A structured and organised approach to managing a busy engineering function Experience working with contractors and external suppliers The ability to communicate effectively with Production, Engineering and senior management A proactive approach to problem solving and continuous improvement Strong understanding of health and safety within a manufacturing environment Full right to work in the UKWHY JOIN? Circa £67,000 salary Monday to Friday DAYS Join a global manufacturing organisation Lead a larger engineering team Work within a structured and professional engineering environment Strong career development and progression opportunities Opportunity to develop your people management and leadership experience Long-term opportunity with a highly successful manufacturing businessFor more information on the Engineering Team Leader FMCG role please contact Simon on (phone number removed) or submit your CV to (url removed) or simply click apply. Engineering Team Leader role is commutable from Ealing, Hayes, Southall, Heston, Hounslow, Hanwell, Acton, Brentford, Isleworth, Uxbridge, West Drayton, Feltham, Greenford, Northolt, Perivale, Wembley, Harrow, Ruislip, Rickmansworth, Watford, Slough, Windsor, Langley, Gerrards Cross, Beaconsfield, High Wycombe, Staines-upon-Thames, Ashford, Sunbury-on-Thames, Shepperton, Twickenham, Richmond, Kingston upon Thames, Chertsey, Bracknell, Maidenhead, Heathrow, Harmondsworth, West Ealing, Northwood, Pinner, Hayes End, Denham, Iver, Datchet and other parts of London, Hertfordshire, Surrey, Berkshire and Buckinghamshire Proactive also offer a referral scheme for successful applicants - if you know anyone that could be suited to this position then please contact Proactive with their details and if they are placed by Proactive you will £250. T&Cs apply Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and advanced technology sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy

CNC Setter / CNC Machinist -- Flexible roles with progression available 📍 Hayes, West London 💰 Highly Competitive Pay + Optional Overtime 🕒 4-Day Working Week 🔧 CNC Turning OR CNC Milling Backgrounds Considered I'm recruiting on behalf of a well-established Aerospace firm in Hayes who are preparing for significant expansion over the coming months. With a healthy order book, consistent long-term work and further growth expected, they're now looking to add several skilled CNC Machinists to their existing team. They're interested in speaking with experienced machinists from either CNC Turning or CNC Milling backgrounds – particularly people who can confidently set machines, understand the machining process and take ownership of their work. This is a permanent, long-term opportunity within a busy engineering business that's investing in its people and continuing to grow. The Role You'll join an experienced machining team within a clean, modern and well-organised engineering environment, producing a mixture of precision components across one-offs, small batches and repeat production work. Depending on your background, you'll work predominantly across either CNC lathes or CNC milling centres. They're not looking for basic machine operators. They need capable machinists who can independently set jobs, understand tooling and offsets, read engineering drawings, maintain quality and keep production moving. If you're already programming, even better – but you don't need to be a full CNC Programmer to be considered. Strong Setter Operators are absolutely encouraged to apply. What We're Looking For We'd be interested in speaking with: CNC Setter Operators CNC Turners CNC Millers CNC Machinists CNC Programmer Setter Operators Multi-Axis Machinists You'll ideally be confident with: Setting CNC machinery independently Reading and interpreting engineering drawings Setting tooling and offsets Producing components to tight tolerances Carrying out first-off and in-process inspection Making adjustments to maintain component quality Identifying and resolving machining issues Working independently without constant supervision Programming experience is also highly desirable, but not essential for every position. Why Consider Moving? Long-Term Stability: They're recruiting because of growth and workload, with a healthy order book and steady, consistent work driving the need for additional permanent machinists. Highly Competitive Pay: Good CNC machinists are difficult to find, and the company understands the value of experienced people. Salary will reflect your actual machining capability and experience. Optional Overtime: Want to earn more? Additional hours are available. Don't want them? You're not relying on overtime to make the role worthwhile. Modern Working Environment: A clean, organised machine shop with good equipment and an experienced engineering team around you. Genuine Progression: As the company expands, there will be opportunities for strong machinists to develop technically, broaden their machining capabilities and take on additional responsibility. Join During a Period of Growth They're not simply replacing somebody who's left. The machining team is being expanded to support the amount of work currently coming through the business and its plans for further growth. Location Based in Hayes, West London, with good access from: Uxbridge | Southall | West Drayton | Hounslow | Heathrow | Greenford | Northolt | Ealing | Ruislip | Feltham | Slough | Watford | High Wycombe etc The site is accessible by car, public transport and cycle, making it a realistic commute from a number of West London and surrounding areas. Already Happily Employed? That's absolutely fine. If you're not actively job hunting but you're simply curious about the pay, machines, 4-day working week or progression available, I'm happy to have a confidential conversation before you decide whether it's worth taking things any further. There's no expectation to commit to anything simply by having a conversation. Interested? If you're a skilled CNC Setter, Turner, Miller or Programmer and would consider joining a stable, growing engineering company offering a four-day week, competitive pay and genuine long-term prospects, apply today for a confidential discussion

Water Hygiene Engineer - Uxbridge £28000-£35000 + Van (private use) + Overtime + Benefits Expert in water treatment and hygiene solutions, our client is looking for a Water Hygiene Engineer to work on contract sites in North and Central London. Typical work for the Water Hygiene Engineer will cover the monitoring and sampling of water systems, tank cleans and closed system analysis. Covering medium and large commercial and industrial sites additional duties will include Cooling Towers, Steam Boilers and Control Panels. To apply for the Water Hygiene Engineer position, the following experience is required Demonstrate a stable career history working as a Water Hygiene Engineer or Water Hygiene Technician Proven experience covering water hygiene work including cooling towers and closed systems Knowledge of remedial plumbing would be beneficial. Full driving license * Enhanced DBS checked With a 40-hour week, optimal overtime and a full corporate benefits package, for more information please email Nick Lewis with a copy of your CV Suitable Home Locations - Slough, Hayes, Hillingdon, Ruislip, Gerrards Cross, Beaconsfield, High Wycombe, Amersham, Chesham, Watford, Rickmansworth, Northwood, Pinner, Harrow, Wembley, Ealing, Southall, Hounslow, Staines-upon-Thames, Windsor, Maidenhead, Bracknell, Reading, Hemel Hempstead, Aylesbury, Heathrow. Similar Job Titles and Keywords - Water Treatment Technician, Water Hygiene Technician, Legionella Technician, Maintenance Technician, Water Treatment Engineer Legionella Risk Assessor, Environmental Water Technician, Water Compliance Engineer, Water Safety Technician, Remedial Plumber, Water Softener Engineer, Field Service Technician, Water Services Engineer, Plumbing and Water Hygiene Technician

Supply Chain Coordinator - Hybrid This successful food processing business is a UK leading innovator within their product sector. They have grown rapidly over the last few years and have flourished to become a trusted name in the food industry. About the Supply Chain Coordinator job The purpose of your role will be to ensure the smooth and efficient running of the supply chain by managing the purchase of ingredients, packaging and services. You will work closely with suppliers and teams across the business to maintain stock levels, improve processes, reduce costs and ensure products meet high standards of quality, food safety and compliance. This is a hands-on role for someone who enjoys building strong relationships, solving problems and finding better ways of working. Key tasks Manage the purchasing of ingredients, packaging and services, while monitoring market trends that affect price, availability and quality to support effective sourcing decisions. Obtain quotations, negotiate contracts and payment terms, build strong supplier relationships, and encourage supplier diversification to reduce supply risks. Ensure all sourcing activities are carried out ethically and in line with relevant industry standards. Oversee demand forecasting, inventory and material planning to ensure an efficient supply chain. Improve supply chain performance by reducing lead times, controlling stock levels and identifying cost-saving opportunities while maintaining service levels. Monitor key performance indicators, support new product development through supply chain planning, and drive improvements that increase efficiency and reduce waste. Always maintain the highest standards of food safety, authenticity, legality and product quality while ensuring compliance with all health and safety requirements. Promptly report any risks or evidence of unsafe or out-of-specification products, equipment, packaging or raw materials to enable immediate corrective action. Build strong working relationships across the business to support company goals. Lead by example and contribute to continuous improvement by identifying ways to improve quality, efficiency and profitability while promoting teamwork and collaboration. About You The successful candidate shall be educated to degree level in a relevant subject. Experience within a similar role, ideally food manufacturing or FMCG would be advantageous but not essential. More details The Supply Chain Coordinator job (ref:9091) is paying up to £40,000 according to your experience. The package includes 20 days holiday + bank holidays, increasing by 1 day per completed calendar year up to 25 days + bank holidays, standard company pension. The site is based in West London and is commutable from Hayes, West Drayton, Slough, Ealing, Greenford, Southall, Uxbridge, Northolt, Hounslow, Feltham, Ruislip and Harrow. The working hours are Monday to Friday 8am to 4.30pm with a 30min lunch break, one day WFH. Alternate job titles Supply Coordinator | Planning Coordinator | Supply Chain Executive | Supply Chain Planner | Supply Planner | Food Production Planning Jobs | Purchasing Coordinator| Procurement Coordinator b3 jobs are market-leading recruiters specialising in the food and beverage manufacturing industry, both in the UK and internationally. Founded in May 2000, we are proud of our reputation for being reliable, knowledgeable and resourceful - with our unique blend of honest and professional work ethics. ‎‎‎If this role isn’t quite what you’re looking for feel free to register with us Upload Your CV - Food Manufacturing Jobs in the UK. On applying for this job, you consent to b3 jobs ltd holding your details on file to contact you about your job search. For full details of our GDPR policy, please refer to the b3 jobs website

CNC Machinist Salary: Up to £48,000 per annum (including shift uplift) Location: Based near Uxbridge (Commutable from: Slough, Watford, High Wycombe, Hayes, Aylesbury, Luton and more) Hours: Continental Shifts – Early: 06:00–16:00 / Late: 12:00–22:00 Pattern: Rotation between early and late shifts (no consecutive weeks) – 177 working days per year, approx. 25 weekends This is a brilliant opportunity to join a globally recognised, multi-award-winning engineering company near Uxbridge, producing low-batch, high-precision safety components for the Aerospace and Defence sectors. As a CNC Machinist, you'll work in a fast-paced CNC department operating a variety of machines, contributing to the production of critical components in a high-spec environment. Benefits: Up to £48,000 per annum (including shift allowance) Annual company bonus 9% non-contributory pension scheme Healthcare cash plan and life assurance Continental shift pattern with balanced work-life schedule Strong commitment to training and professional development CNC Machinist Responsibilities: Setting and operating CNC mills and lathes (Bridgeport, Hurco, DMG, Protrack) Editing G&M programs directly at the machine when required Producing low-volume, high-precision components Operating CMM machinery and interpreting CMM drawings Performing basic machine and tool maintenance Self-inspecting and deburring components to high standards Supporting lean manufacturing practices and process improvements CNC Machinist Requirements: Several years’ experience as a CNC Machinist (milling and/or turning) Confident setting and operating multi-axis machines Ability to self-inspect using standard measurement tools Experience reading CMM reports Mechanical apprenticeship (ideal but not essential) Familiarity with 5S, Continuous Improvement, Kanban To apply, simply click the apply button

Assembly Operative Location: Near Uxbridge, Middlesex (commutable from Slough, High Wycombe, Watford, Staines, Hayes, Maidenhead, Windsor, Reading and surrounding areas) Salary: £35,500 per annum (£18.45ph) + Daily Overtime Hours: Monday to Thursday 8:00am - 5:00pm | Friday 8:00am - 12:00pm (37 hours per week) Duration: Permanent Syntech Recruitment are proud to be supporting a world-renowned aerospace manufacturer in their search for Assembly Operatives to join their growing production team. This is an excellent opportunity for experienced manufacturing or mechanical assembly professionals to work on the production of complex, life-saving aerospace equipment within a modern, highly regulated manufacturing environment. The role offers a varied workload across precision assembly, inspection and testing, working from engineering drawings and build plans to produce high-quality mechanical assemblies and sub-assemblies. What’s in it for you? £35,500 starting salary (£18.45ph) Daily overtime paid at 1.5x basic rate Friday lunchtime finish every week 25 days holiday plus Bank Holidays Employer pension contribution of 9% Healthcare cash plan Life assurance Opportunity to purchase additional annual leave Retail discounts platform Assembly Operative Responsibilities Assemble mechanical components, assemblies and complex sub-assemblies from engineering drawings and build instructions Build high-precision products using hand tools, fixtures and assembly equipment Carry out self-inspection and quality checks throughout the assembly process Use measuring equipment, gauges and inspection equipment to ensure components meet specification Work with a variety of manufacturing processes including riveting, adhesives, pipe bending, composites and mechanical fastening where required Inspect and test finished components using gauges, measuring tools and automated testing equipment Record production, inspection and non-conformance information using SAP Complete work to strict quality, safety and production standards Assist with continuous improvement and 5S activities within the department Assembly Operative Requirements Previous mechanical assembly or manufacturing experience Ability to read and interpret engineering drawings Confident using hand tools and measuring equipment Strong attention to detail and quality standards Experience working within aerospace, defence, automotive, medical or another precision manufacturing environment would be advantageous Experience with riveting, pipe bending, adhesives, composites or swaging would be beneficial * Knowledge of pressure testing equipment, multimeters or automated testing equipment would be advantageous Application Process: We aim to respond to all applicants within 5 working days. If you do not hear from us within this time, your application has unfortunately not been successful. By applying for this position, you agree to us processing your personal data in accordance with our Privacy Policy. Syntech Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers

An unusual role offering 'the best of both worlds' combining both being a Workshop Engineer 50% of your time and after training a Field Service Engineer for the other 50%, for a packaging machinery manufacturer supplying the food industry. BASIC SALARY: up to £48,000 BENEFITS: · Overtime to earn £5,000 to £7,000 to earn circa £55,000 · Commission & Bonus on aftersales to earn up to £1,000 · Company Car LOCATION: Home based but you MUST be commutable to the companies UK office near Heathrow airport, as you will be office based. After training you will be office based 50% & field based 50%, covering the UK. COMMUTABLE LOCATIONS: Slough, Uxbridge, Watford, Maidenhead, Hemel Hempstead, Hayes, Amersham JOB DESCRIPTION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, food After you have completed your training, this role will become a hybrid Workshop Engineer / Field Service Engineer role, with a 50 / 50 split of your time. As a Workshop Engineer, you will be working on machines pre-installation in the workshop at the companies office and after training as a Field Service Engineer you will be required to work on client sites and will be responsible for installation, commissioning, repair and refurbishment of machines on sites across the whole UK. Overtime is paid door to door and you can expect to travel and stay away from home 1 to 2 nights per week and to be available to work weekends twice a month if required. PERSON SPECIFICATION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, food · You will be an experienced Workshop Engineer, or a Factory Maintenance Engineer who is now looking for hybrid workshop and field service role. · The company will also consider an experienced Field Service Engineer who would like a better work life balance, spending less time away from home. · Any previous experience of working on packaging machinery and / or of working within the food industry would be advantageous. · You MUST be a qualified Multi Skilled Electrical / Electronic Engineer, having completed at least a full apprenticeship. THE COMPANY: A very well established and market leading manufacturer of packaging machinery supplied to the food industry. INTERESTED? Please click apply. You will receive an acknowledgment of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18623, Wallace Hind Selection

An unusual role offering 'the best of both worlds' combining both being a Workshop Engineer 50% of your time and a Field Service Engineer for the other 50%, for a packaging machinery manufacturer supplying the food industry. BASIC SALARY: up to £45,000 BENEFITS: · Overtime to earn £5,000 to £7,000 · Commission & Bonus on aftersales to earn up to £2,000 · Company Car LOCATION: Home based but you MUST be commutable to the companies UK office near Heathrow airport, as your time as a Workshop Engineer, will be office based. All other time will be field based, covering the UK. COMMUTABLE LOCATIONS: Slough, Uxbridge, Watford, Maidenhead, Hemel Hempstead, Hayes, Amersham JOB DESCRIPTION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, food This is a hybrid Workshop Engineer / Field Service Engineer role, with a 50 / 50 split of your time. As a Workshop Engineer, you will be working on machines pre-installation in the workshop at the companies office and as a Field Service Engineer you will be required to work on client sites and will be responsible for installation, commissioning, repair and refurbishment of machines on sites across the whole UK. Overtime is paid door to door and you can expect to travel and stay away from home 1 to 2 nights per week and to be available to work weekends twice a month if required. PERSON SPECIFICATION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, food · You will be an experienced Workshop Engineer, or a Factory Maintenance Engineer who is now looking for hybrid workshop and field service role. · The company will also consider an experienced Field Service Engineer who would like a better work life balance, spending less time away from home. · Any previous experience of working on packaging machinery and / or of working within the food industry would be advantageous. · You MUST be a qualified Multi Skilled Electrical / Electronic Engineer, having completed at least a full apprenticeship. THE COMPANY: A very well established and market leading manufacturer of packaging machinery supplied to the food industry. INTERESTED? Please click apply. You will receive an acknowledgment of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18598, Wallace Hind Selection

An unusual role offering 'the best of both worlds' combining both being a Workshop Engineer 50% of your time and after training a Field Service Engineer for the other 50%, for a packaging machinery manufacturer supplying the food industry.BASIC SALARY: up to £48,000BENEFITS:· Overtime to earn £5,000 to £7,000 to earn circa £55,000· Commission & Bonus on aftersales to earn up to £1,000· Company CarLOCATION: Home based but you MUST be commutable to the companies UK office near Heathrow airport, as you will be office based.After training you will be office based 50% & field based 50%, covering the UK.COMMUTABLE LOCATIONS: Slough, Uxbridge, Watford, Maidenhead, Hemel Hempstead, Hayes, AmershamJOB DESCRIPTION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, foodAfter you have completed your training, this role will become a hybrid Workshop Engineer / Field Service Engineer role, with a 50 / 50 split of your time.As a Workshop Engineer, you will be working on machines pre-installation in the workshop at the companies office and after training as a Field Service Engineer you will be required to work on client sites and will be responsible for installation, commissioning, repair and refurbishment of machines on sites across the whole UK.Overtime is paid door to door and you can expect to travel and stay away from home 1 to 2 nights per week and to be available to work weekends twice a month if required.PERSON SPECIFICATION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, food· You will be an experienced Workshop Engineer, or a Factory Maintenance Engineer who is now looking for hybrid workshop and field service role.· The company will also consider an experienced Field Service Engineer who would like a better work life balance, spending less time away from home.· Any previous experience of working on packaging machinery and / or of working within the food industry would be advantageous.· You MUST be a qualified Multi Skilled Electrical / Electronic Engineer, having completed at least a full apprenticeship.THE COMPANY:A very well established and market leading manufacturer of packaging machinery supplied to the food industry.INTERESTED? Please click apply. You will receive an acknowledgment of your application.Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives.Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct.REF: MPH18623, Wallace Hind SelectionTPBN1_UKTJ

Do you like to identify, win and then run the project? This Contract Manager role is more than shifting paperwork. You'll be integral throughout the proposal / tender phase, winning the business and making sure the client receives what they signed up for. Covering London and the surrounding area, you'll drive the new high end special projects division, identifying key architects and designers who value style luxury and quality.BASIC SALARY: £45,000 - £55,000BENEFITS:· Commission structure aligned to performance (1/2% on sales)· Full product and technical training· Company pension· 25 days holiday + Bank Holidays + Christmas shutdown (3/4 days)LOCATION: Twickenham (office based) - realistically you'll spend 50% of your time in the showroom / office, and 50% on site, meeting clients, architects, contractors and developers.COMMUTABLE LOCATIONS: West London, Slough, Uxbridge, Ealing, Camberley, Woking, Epsom, Hayes, Wembley, BeaconsfieldWE HAVE A GREAT STORY TO TELL!We have built an enviable reputation delivering bespoke fireplace solutions into some of the most impressive residential and commercial properties in the UK. Our projects range from luxury private homes through to hospitality and prestigious commercial environments. The business has a strong heritage, an established reputation and a growing pipeline of opportunities.What we're looking for now is somebody who can help take that growth even further. Not somebody who waits, somebody who gets involved.THE OPPORTUNITY : Contracts Manager, Sales - Interior Design - Luxury ProductsMost people would describe this as a sales role. They're wrong! Yes, there is sales involved. But if you're purely a salesperson waiting for enquiries to arrive and customers to walk through the door, this probably isn't for you. Because the reality is very different. This is a role built around projects, relationships, commercial awareness and ownership.One day you could be in the showroom discussing a luxury residential project worth £75,000. The next you're meeting an architect, contractor or developer to understand what they're working on and where you can add value.This is about becoming part of the project long before an order is placed, and that means understanding people, drawings, specifications, timelines, budgets and construction projects—not just products.JOB DESCRIPTION: Contracts Manager, Sales - Interior Design - Luxury ProductsThis Contracts Manager role sits right in the middle of sales, project management and stakeholder engagement. One project alone could involve a homeowner, an architect, an interior designer, a contractor, a project manager, our installation team, and they all have different priorities - your job is to bring it all together.You'll manage opportunities from first enquiry through to project award, working with multiple stakeholders to ensure projects move forward commercially and successfully.This isn't transactional selling, it's consultative, it's project-led and ultimately, it's about helping clients deliver exceptional spaces.The purpose of the role is simple:· Identify, develop and convert project opportunities,· Manage project enquiries from first contact through to order confirmation.· Build relationships with architects, interior designers, contractors and developers.· Own projects from initial enquiry through to order.· Work closely with operational and installation teams to ensure successful delivery.· Help grow the Special Projects side of the business.KEY RESPONSBILITIES: Contracts Manager, Sales - Interior Design - Luxury Products· Attending client meetings and site visits.· Working with drawings, specifications and project information.· Producing quotations and proposals.· Representing the business at networking and industry events.· Owning your pipeline and your results.REQUIREMENTS: Contracts Manager, Sales - Interior Design - Luxury ProductsYou do not need specific product experience (we do fireplaces). Experience operating in construction, interiors, fit-out, residential projects or design-led environments is preferred as you will have exposure to architects, contractors, developers and project stakeholders, along with the ability to understand drawings, specifications and project information.· Strong commercial awareness and excellent communication skills.· A proactive mindset and the confidence to create opportunities rather than waiting for them.· Build relationships.· Manage complex projects.· Understand technical detail.· Communicate with different stakeholders.You will most likely be one of the following Contracts Manager, Project Manager, Quantity Surveyor, Estimator, Specification Sales Manager, Technical Sales Consultant, Design & Build Professional or a High-End Interiors Sales ConsultantTHE COMPANY:You'll be joining a well-established, specialist business operating within a premium segment, working on projects that genuinely stand out. It's a close-knit team where collaboration matters, input is valued, and success is visibleThis isn't corporate. You won't be a number.INTERESTED? Please click apply. You will receive an acknowledgement of your application.Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives.Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct.REF: MH18530, Wallace Hind SelectionTPBN1_UKTJ

Food Technologist £39,000 per year + on-site parking + Progression + Training + Benefits Monday - Friday, 9am - 5:30pm Southall Do you want to join an award-winning food manufacturing company? Are you looking for an opportunity to work within the full manufacturing process, developing new recipes from kitchen concept through to large-scale production? Due to continued growth, my client is looking to recruit a Food Technologist to join their expanding team. The successful candidate will be responsible for reviewing and improving existing recipes, developing innovative new concepts, and refreshing and optimising existing products. You will also trial new ingredients, support product launches, and monitor products post-launch to evaluate performance and customer feedback. You'll working closely with Suppliers and Head of Technical, you will play a key role in supporting NPD projects and ensuring all product files and documentation are accurately maintained. The company is a highly successful and well-established manufacturer at the forefront of its sector, continuing to expand across all departments. You will be joining a growing, experienced, and supportive team within a business that prides itself on staff retention, development, and career progression. For further details, please click apply - REFERENCE 5312 The Role Support the launch of new products Ensure all raw material and finished product specifications remain current and are reviewed whenever recipes, legislation or supplier information changes Prepare, review and update finished product specifications, ensuring they are completed accurately and within customer deadlines The Candidate Experience working in a technical role within the food manufacturing industry. Strong attention to detail HACCP qualification and Internal Auditor training Consultant: Alice Holwell Elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Food Technologist | Food Scientist | Product Development | Quality Technologist | NPD | HACCP | Food Safety | Food Manufacturing | Southall | Slough | Hounslow | Ealing INDMP

CNC Team Leader (Hands-On) | 4-Day Week | 📍 Hayes, West London Easily commutable from: Uxbridge, Southall, Greenford, Hounslow, Heathrow, West Drayton, Northolt, Ruislip, Ealing, Feltham, Slough and surrounding areas. 💰 Highly Competitive Salary (DOE) 🕒 Monday – Thursday | 4:00pm – 12:00am ⏰ 36 Hour Basic Week 🏖️ Three-Day Weekend Every Week Ready to take the next step in your machining career? I'm recruiting on behalf of a growing aerospace precision company looking for a hands-on CNC Team Leader to help drive production whilst remaining actively involved on the shop floor. They continue to invest heavily in both their people and equipment, creating a clean, modern working environment where engineers are trusted, valued and encouraged to contribute ideas that improve production. This isn't an office-based management position. You'll still be programming, setting and supporting production whilst becoming the experienced engineer the team naturally turns to for technical support, guidance and day-to-day decision making. If you're already the person colleagues come to when they need help proving out a job, solving machining problems or making production decisions, this could be the perfect opportunity to step into a leadership role without moving away from the machines. The Role Working closely with the Foreman, you'll help ensure production runs smoothly throughout the day whilst leading by example on the shop floor. You'll spend your first couple of weeks learning the business, understanding how production operates and getting to know the team before gradually taking ownership of the department. You'll become the main point of contact during your shift, supporting Setter Operators, helping solve technical challenges and ensuring work continues to flow efficiently. Alongside your machining responsibilities, you'll also act as one of the site's trained First Aiders and play an important role in maintaining the smooth day-to-day running of the machine shop. Key Responsibilities Leading a team of skilled CNC Setter Operators. Remaining hands-on with programming, setting and machining. Supporting production planning and workflow. Acting as the first point of contact for technical support on shift. Mentoring and supporting less experienced machinists. Working closely with the Foreman to keep production running efficiently. Ensuring quality, safety and housekeeping standards are maintained. Supporting continuous improvement across the machine shop. Acting as one of the site's trained First Aiders (training can be provided if required). What We're Looking For We're looking for someone who naturally takes ownership. Someone who enjoys helping others, keeps production moving and leads by example rather than simply managing from the sidelines. You may already be working as a: CNC Team Leader Lead CNC Machinist Senior CNC Programmer Setter Operator Cell Leader Senior Setter Operator Or you may simply be an experienced machinist who's ready to take that next step. Experience with either of the following would be highly advantageous: CNC Milling Centres and/or Multi-Axis CNC Turning Centres / Lathes What's On Offer ✅ Four-day working week (Monday–Thursday) ✅ Days only ✅ 36-hour basic working week ✅ Highly competitive salary ✅ Optional overtime available ✅ Modern, clean and well-organised machine shop ✅ Friendly and highly skilled engineering team ✅ Genuine autonomy and responsibility ✅ Opportunity to become the go-to engineer within the department ✅ Work closely alongside experienced management ✅ Influence machining strategies and continuous improvement projects ✅ Long-term progression within an expanding precision engineering business

Assembly Operative – Aluminium & Composite Assembly Location: Near Uxbridge, Middlesex (commutable from Slough, High Wycombe, Watford, Staines, Hayes, Maidenhead, Windsor, Reading and surrounding areas) Salary: £35,500 per annum (£18.45ph) + Daily Overtime Hours: Monday to Thursday 8:00am – 5:00pm | Friday 8:00am – 12:00pm (37 hours per week) Syntech Recruitment are proud to be supporting a world-renowned aerospace manufacturer in their search for experienced Assembly Operatives to join their growing production team. This role is heavily focused on the assembly of aluminium, carbon fibre and composite components, using engineering drawings and detailed build instructions to produce high-quality aerospace assemblies. We are particularly interested in candidates with strong hands-on riveting and mechanical assembly experience, who are confident working with aluminium sheet/components, carbon fibre and other composite materials within a precision manufacturing environment. What’s in it for you? £35,500 starting salary (£18.45ph) Daily overtime paid at 1.5x basic rate Friday lunchtime finish every week 25 days holiday plus Bank Holidays Employer pension contribution of 9% Healthcare cash plan Life assurance Assembly Operative Responsibilities Assemble aluminium, carbon fibre and composite components to produce precision aerospace assemblies and sub-assemblies Carry out riveting and mechanical fastening of aluminium and composite structures Read and accurately interpret engineering drawings, technical drawings and build instructions Position, align and secure components in accordance with specified tolerances and assembly procedures Drill, countersink, rivet and mechanically fasten components as required Work with different types of rivets, fasteners, fixings and assembly hardware Handle and assemble carbon fibre and other composite materials while maintaining strict quality standards Use adhesives and bonding processes where required as part of the assembly process Use hand tools, air tools, fixtures and specialist assembly equipment Assembly Operative Requirements Previous experience within mechanical, structural or precision assembly Strong practical experience with riveting and mechanical fastening Experience working with aluminium components, sheet aluminium or fabricated aluminium assemblies Experience working with carbon fibre, GRP or other composite materials would be highly advantageous Confident reading and interpreting engineering and technical drawings Comfortable using drills, rivet guns, hand tools, air tools and other assembly equipment * Good understanding of component alignment, hole preparation, drilling and fastening This position would particularly suit candidates from an aircraft assembly, aerospace structures, motorsport composites, aluminium fabrication, coachbuilding or precision engineering background who have strong riveting and technical drawing experience. Application Process: We aim to respond to all applicants within 5 working days. If you do not hear from us within this time, your application has unfortunately not been successful. By applying for this position, you agree to us processing your personal data in accordance with our Privacy Policy. Syntech Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. INDMA

Maintenance Engineer London 4 on 4 Off DAYS ONLY (can chose times) | Wembley, North West London At a Glance 4 on 4 off days only - excellent work-life balance Award-winning manufacturing business Wembley, North West London Well-established, highly successful manufacturer Excellent team morale and supportive management Structured career progression Multi-skilled role carrying out planned and reactive maintenance Engineers are encouraged to take ownership and drive continuous improvement Manufacturing background essential Must be UK based with full right to work in the UKThe Opportunity Are you a Multi Skilled Maintenance Engineer looking for a days-only shift pattern that offers an outstanding work-life balance? We are recruiting for an award-winning manufacturer based in Wembley, North West London. This is a business that genuinely values its engineering team, invests heavily in its people and equipment, and has built an excellent reputation for staff retention and career development. As a Maintenance Engineer, you will become part of a highly motivated engineering team where your ideas are listened to, your achievements are recognised, and you will have the opportunity to influence the future of the department through continuous improvement initiatives. The Role As a Maintenance Engineer, you will be responsible for carrying out both planned preventative maintenance and reactive maintenance across a variety of manufacturing equipment to ensure production runs efficiently. Responsibilities include: Planned preventative maintenance (PPM) Reactive breakdown maintenance Electrical and mechanical fault finding Root cause analysis and permanent corrective actions Continuous improvement projects Minimising downtime and improving equipment reliability Working closely with production and other departments Maintaining accurate maintenance recordsAbout You To be successful in this Maintenance Engineer position, you will need: Previous experience as a Maintenance Engineer within a manufacturing or production environment Multi-skilled engineering experience with electrical and mechanical fault-finding abilities A proactive approach to problem solving A passion for improving machinery and processes Strong communication and team-working skills To be based in the UK with full right to work in the UKWhy Join? 4 on 4 off DAYS only Join an award-winning manufacturer Excellent engineering team with outstanding morale Clear and structured career progression Stable, well-run business with continued investment Engineers are trusted to take ownership of their area Genuine opportunity to contribute ideas and lead continuous improvement projects Long-term career with an employer that values its Maintenance EngineersApplication Process If you have the above skills and wish to be considered for this Maintenance Engineer position or find out more details then please contact Simon on (phone number removed) or submit your CV to (url removed) or simply click apply below. Lead Maintenance Engineer is commutable from Watford, Acton, Southall, Slough, Staines, Twickenham, Edgware, Stanmore, Rickamansworth, Hendon, Ruislip, Harrow, Heathrow, Beaconsfield, Amersham, Barnet, Hounslow, Ickenham, Windsor and other parts of Herfordshire, Buckinghamshire and London Why work with Proactive? Proactive Global are an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy

Warehouse Operative – Slough / Heathrow / Feltham.Location: Slough, Heathrow & Feltham.Picking and packing orders accurately.Maintaining a clean and safe working environment.Following warehouse health & safety procedures.Working as part of a team to meet daily targets.Previous warehouse ex

Site Electrician (Progression to Service Engineer) £42,000 - £45,000 + Training on Renewables + Progression + Company Van (Private use) + Private Medical + Benefits Greenford, Ealing Are you a Site Electrician who holds a City and Guilds 2391 certificate and a valid ECS Card looking for the opportunity to be trained on unique renewable systems with the goal of becoming a fully qualified Service Engineer? Do you want an autonomous role covering London without anti-social hours and overtime requirements? In the role you will be servicing, installing and maintaining high-tech rainwater recycling systems on commercial and industrial construction projects. This will involve working across central London, with 3 weeks of planned preventative work and 1 week of reactive work per month. No requirement for 24-hour call outs. This company have been established for 40 years and have carved out a profitable niche with their in-house designed water-saving and recycling projects. With new legislation coming into effect, their looking towards a bright future of growth and expansion. This role would suit a Site Electrician with C&G 2391 Test & Inspection certificate and a valid ECS card looking for expert training to become a fully autonomous site Service Engineer. The Role: Servicing, installing and maintaining rainwater harvesting & recycling equipment Planned Preventative work and reactive work Expert training on bespoke, automated renewable water recycling equipment Field based, covering within the M25 Company Van for private use The Person: Site Electrician or similar City and Guilds 2391 certificate Valid ECS Card and UK Drivers License Job Reference: BBBH 26505 Keywords: Electrician, Service, Engineer Electrical, Automation, Automated, Construction, Site, Commercial, Industrial, M25, Field, Mobile, London, Central, West, Perivale, Greenwood, Wembley, Hayes, Slough If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Class 1 Driver Savanna Staff Solutions are proudly supplying Class 1 Drivers in support of the most Well-known Postal service in the world, driving their Big Red Trucks. We need multiple Class 1 Drivers for different sites Heathrow, Greenford, Park Royal, Woking, Hounslow and more! Your Daily Class 1 Driver duties will include: Transport of Mail on Cages (York's) to various mail depots round the UK Possible offloading of yorks on loading bays Possible trailer swaps Possible stand by driver To be considered for this Class 1 Driver role, you must be in the UK and have right to live and work in the UK before applying. You must also have the following attributes: Current UK/Ireland Driving Licence held for minimum 2 years (Insurance purposes) Current CPC card Digi card with the knowledge on manual entry Experience on the road and be able to pass a driving assessment with a blind reverse Have Good English to communicate to transport offices in English Our client is looking for an experienced Class 1 Driver to join their busy team for ongoing assignments for the rest of the year and possibly into next year at: Park Royal/London Hounslow/Jubilee Slough/Heathrow Depot Greenford Depot Woking If you are interetsed in working for the world famous King's Mail & Parcel company, please hit "Apply Now" and one of our team will be in touch to begin the regisration process adn get you ready for you induction Savanna staff Solutions; Leading the way in technology based recruitment techniquies TPBN1_UKTJ

An unusual role offering 'the best of both worlds' combining both being a Workshop Engineer 50% of your time and a Field Service Engineer for the other 50%, for a packaging machinery manufacturer supplying the food industry. BASIC SALARY: up to £45,000 BENEFITS: · Overtime to earn £5,000 to £7,000 · Commission & Bonus on aftersales to earn up to £2,000 · Company Car LOCATION: Home based but you MUST be commutable to the companies UK office near Heathrow airport, as your time as a Workshop Engineer, will be office based. All other time will be field based, covering the UK. COMMUTABLE LOCATIONS: Slough, Uxbridge, Watford, Maidenhead, Hemel Hempstead, Hayes, Amersham JOB DESCRIPTION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, food This is a hybrid Workshop Engineer / Field Service Engineer role, with a 50 / 50 split of your time. As a Workshop Engineer, you will be working on machines pre-installation in the workshop at the companies office and as a Field Service Engineer you will be required to work on client sites and will be responsible for installation, commissioning, repair and refurbishment of machines on sites across the whole UK. Overtime is paid door to door and you can expect to travel and stay away from home 1 to 2 nights per week and to be available to work weekends twice a month if required. PERSON SPECIFICATION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, food · You will be an experienced Workshop Engineer, or a Factory Maintenance Engineer who is now looking for hybrid workshop and field service role. · The company will also consider an experienced Field Service Engineer who would like a better work life balance, spending less time away from home. · Any previous experience of working on packaging machinery and / or of working within the food industry would be advantageous. · You MUST be a qualified Multi Skilled Electrical / Electronic Engineer, having completed at least a full apprenticeship. THE COMPANY: A very well established and market leading manufacturer of packaging machinery supplied to the food industry. INTERESTED? Please click apply. You will receive an acknowledgment of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18598, Wallace Hind Selection TPBN1_UKTJ

Class 2 Driver Part time Class 2 Driver required Now!!! Are you a Class 2 Driver looking for work? We have multiple clients around West and North West Londoin offering us work so we need more drivers urgently! If you have held your Category C Licence for 12 months and have some on the road experience then Savanna staff Solutions is perfect for you. As well as the usual ongoing Class 2 Driver work we provide, we also have a massive number of ad-hoc shifts doing the following: Class 2 Days Class 2 Nights Class 2 Over nights for the film or theatre industry on location in the UK (and overseas when available) Class 2 food Deliveries Class 2 shunting Mail companies Class 2 long Haul (minimal deliveries) Here at Savanna our typical Class 2 driver rates are between £16 and £24 p/h depending on client, shift time, length, and if its week or weekend work. Savanna have \Class 2 Driver shifts that can work around you. All you need is 1 year minimum on your HGV category you wish to drive and some on the road experince and we can help We have Class 2 driver work in the follwoing area's: Park Royal Greenford Slough Camaberley Brent Cross Hounslow Hayes We pay our Class 2 driver via a LTD company where our clients allow us or UmbrellaPAYE method where they do not Hit " Apply now" below and one of our dedicated HGV DRIVER recruitment team will be in touch to discuss options and begin the recruitment process Savanna staff Solutions: built by drivers and run by drivers. So, you're in safe hands.... Drivers' hands! TPBN1_UKTJ

Gold Card Electrician (Progression to Service Engineer) Submit your CV and any additional required information after you have read this description by clicking on the application button. £42,000 - £45,000 + Training on Renewables + Progression + Company Van (Private use) + Private Medical + Benefits Greenford, Ealing Are you a Gold Card Electrician who holds a City and Guilds 2391 Test & Inspection certificate for the opportunity progress your career, becoming an expert in renewable rain-water recycling technology? Do you want an autonomous role covering London without anti-social hours and overtime requirements? In the role you will be servicing, installing and maintaining high-tech rainwater recycling systems on commercial and industrial construction projects. This will involve working across central London, with 3 weeks of planned preventative work and 1 week of reactive work per month. No requirement for 24-hour call outs. This company have been established for 40 years and have carved out a profitable niche with their in-house designed water-saving and recycling projects. With new legislation coming into effect, their looking towards a bright future of growth and expansion. This role would suit a Gold Card Electrician with a Test & Inspection certificate looking to progress thier career working on renewable technology with no requirement for anti-social hours or extensive overtime. The Role: Servicing, installing and maintaining rainwater harvesting & recycling equipment Planned Preventative work and reactive work Expert training on bespoke, automated renewable water recycling equipment Field based, covering within the M25 Company Van for private use The Person: Gold Card Electrician City and Guilds 2391 Test & Inspection certificate UK Drivers License Job Reference: BBBH 26505a Keywords: Electrician, Service, Gold, Card, JIB, ECS, Test, Inspection, Engineer, Electrical, Automation, Automated, Construction, Site, Commercial, Industrial, M25, Field, Mobile, London, Central, West, Perivale, Greenwood, Wembley, Hayes, Slough If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. xrnqpay By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Electronics Field Service Engineer - Slough Area vacancy in Based Slough Area – Maidenhead / Bracknell / Hounslow (226lw).

Electronics Field Service Engineer – Based Slough Area – Maidenhead / Bracknell / Hounslow - £41,000 starting salary plus overtime package**is looking to recruit to the Field Service department an Electronics Field Service Engineer to maintain, repair and commission gas detection equipment. Cov

Kharis Solutions Limited is looking for compassionate and reliable Care Assistants to provide high-quality, person-centred care and support to individuals living in their own homes across Slough, Windsor, Maidenhead and the surrounding areas.Read on to find out what you will need to succeed in this

Are you a qualified Geography Teacher looking for a role within Secondary Schools in Slough?. Academics are working with an outstanding school in Slough looking for Geography Teachers who are enthusiastic and hold themselves to high standards both in and out of the classroom. As a Geography Teacher