Quality inspection jobs in BoltonCreate job alerts

MERITUS are recruiting for an Electrical Fitter to join a soveriegn defence manufacturer on advanced production programmes from their site in Bolton. PLEASE NOTE: You must come from a skilled apprenticeship to be eligible for the role. \n ELECTRICAL FITTER - INSIDE IR35 - £29.02 PER HOUR (RISING TO £30.38 PER HOUR AFTER 12 WEEKS) - BOLTON, UK - 12 MONTHS (LIKELY TO GO PERM) - SINGLE STAGE INTERVIEW PROCESS - SECTOR: DEFENCE \n HOURS: 37 Hours Per Week + Optional OT \n CLEARANCE: Must be eligible for SC Clearance \n The Electrical Fitter will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. \n The Electrical Fitter will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. \n Specific responsibilities include: \n • Certify the product in line with Product Certification procedure. Demonstrated ability / willingness to certify own work in line with company quality standards. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. * Willing to contribute to an environment of process improvement \n Skillset/experience required: Approved Apprenticeship/Apprenticeship Framework/Modern ApprenticeshipORVocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3ORVocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3ORVocational NVQ3 with Further Education, BTEC ONC/HNC \n • IPC 610 certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable. Manual handling training. Lifting and slinging (including overhead cranes) training. * ESD training. \n • Certify the product in line with Product Certification procedure. Demonstrated ability / willingness to certify own work in line with company quality standards. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. * Willing to contribute to an environment of process improvement \n Skillset/experience required: \n Approved Apprenticeship/Apprenticeship Framework/Modern ApprenticeshipORVocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3ORVocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3ORVocational NVQ3 with Further Education, BTEC ONC/HNC \n • IPC 610 certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable. Manual handling training. Lifting and slinging (including overhead cranes) training. * ESD training.

Company description: \n Location: Bolton, England, United Kingdom Job ID: 87877 We Elevate... Quality of urban life\n \n Our elevators, escalators, and moving walks safely transport more than two billion of us up and down buildings and across transportation hubs every day. As part of the Schindler team, you’ll discover meaningful work that enhances quality of life for communities, and contribute to making places more accessible, inclusive, and sustainable for all. We combine innovation, safety, and high ethical standards, ensuring respect both among colleagues and for the world around us. By joining us, you don’t just become part of our success story; you help shape the future and continue our rich legacy that started back in 1874. \n \n Join us as a Lift Engineers - Join Our Talent Pool\n Please note: This posting is not for a specific or immediate position. We are creating a talent pool of qualified Lift Engineers to fill roles that frequently become available. By submitting your application, you'll be considered for future opportunities, and we will reach out to you when suitable positions arise. \n \n \n Job description: \n\n • Carry out routine servicing of lift equipment, including minor repair work and the routine replacement of components and in accordance with approved company procedures (PPE, PDA, Expert+ etc) \n, • To rectify and reduce faults on lift equipment in cases of breakdown and check to confirm correct functioning \n, • Checking the lift function as part of maintenance, checks to include, speed, motor start/stop, weight, noise, temperature and power supplies using approved company issued tooling and protective equipment \n, • Conduct the routine inspection and adjustment of lift in accordance with approved procedures. Reinstate lift and complete service documentation \n, • Carrying out more advanced fault finding and diagnostic procedures using a range of techniques, technical manuals and appropriate test equipment, restoring equipment to service. \n, • Conduct site surveys \n\n Profile description: \n\n • Experience in Lift Servicing/ Maintenance/ Repairs preferred \n, • Qualified to NVQ level 3 minimum in Lift maintenance or equivalent \n, • Advanced Electrical and Mechanical knowledge, including Multi-Brand equipment \n, • Advanced problem-solving skills \n, • Full UK driving License \n, • The ability to work under pressure, to deadlines and within efficiencies \n, • The ability to work independently with a flexible approach \n, • Good communication skills at different levels (Client/Service Leader/Inspectors) \n, • Manual dexterity - Requires the use of hands, arms and feet for repetitive lifting; use of hands and arms to operate various hand and power tools and to record written information \n, • Proven fault finding and diagnostic skills\n\n We offer: \n\n • Competitive salary\n, • Company Van\n, • 25 days’ holiday plus bank holidays, and an annual paid volunteering day\n, • Pension scheme with 6% company contribution\n, • Comprehensive life assurance\n, • Enhanced family leave\n, • Private medical cover with a trusted provider, plus 24/7 virtual GP access\n, • Employee Assistance Programme offering confidential support\n, • Free eye tests and eyewear discounts\n, • Access to a range of employee benefits, including Tech and Cycle to Work schemes, plus exclusive retailer discounts\n

Having successfully placed a number of interim valuation consultants with the business over recent years, Beach Baker is delighted to be continuing its partnership with one of the leading independent valuation practices. \n \n Operating across England and Wales, our client has built a very good reputation for delivering high-quality residential, commercial and development valuations. Renowned for their professionalism, responsiveness and technical expertise, they have established long-standing relationships with a wide range of lenders, brokers and financial institutions, particularly within the bridging, development finance and secured lending sectors. \n \n As demand for their services continues to grow, we are looking to speak with experienced RICS Registered Valuers interested in joining their expanding national network. \n \n The Opportunity \n This role offers genuine flexibility, allowing you to manage your own workload while benefiting from a steady stream of instructions and comprehensive back-office support. \n \n Key responsibilities include: \n\n • Undertaking valuation instructions within approximately 40 miles of your home location\n, • Carrying out residential, commercial and development valuations\n, • Delivering reports within agreed service levels:\n, • Residential valuations: 2 working days from inspection\n, • Commercial and development valuations: 4 working days from inspection\n, • Managing your own diary and availability\n, • Selecting the instructions you wish to undertake\n\n \n Remuneration \n The business offers a transparent and highly competitive fee-sharing arrangement: \n\n • 50% of the net fee received from the client\n, • Minimum fee guarantee of £150 per instruction\n, • Clearly defined fee scales with prompt payment processes\n\n \n About You \n To be considered, you will possess: \n\n • MRICS qualification and RICS Registered Valuer status\n, • A minimum of five years' post-qualification valuation experience\n, • Proven experience producing high-quality valuation reports\n, • Strong organisational skills and attention to detail\n, • The ability to work independently while managing service-level commitments\n\n \n Why Join? \n\n • Attractive and transparent earning potential\n, • Access to instructions from an established panel of major UK lenders and finance providers\n, • Complete flexibility over your working pattern and diary management\n, • Professional Indemnity Insurance provided\n, • Comprehensive administrative and compliance support\n, • Structured reporting templates and technical guidance\n, • Protection through cancellation fee arrangements\n, • Opportunity to focus on valuation work rather than business development or administration\n

5 Axis CNC Machinist Location: AthertonSalary: £21.37 per hour + OvertimeJob Type: PermanentThe Role We're recruiting on behalf of a well-established precision engineering business in Atherton that specialises in the manufacture of large, complex machined components for demanding industrial sectors.Due to continued growth and a strong order book, they are looking to add an experienced 5 Axis CNC Machinist to their manufacturing team.This is an excellent opportunity to join a modern machining environment working on large-format components where quality and precision are paramount.Key Responsibilities Set, operate and edit programmes on large-format 5-axis CNC machining centresManufacture precision components from engineering drawings and specificationsMachine a variety of materials to tight tolerancesSelect and set tooling to achieve optimum performance and cycle timesConduct in-process inspection using standard measuring equipmentIdentify and resolve machining issues to maintain productivity and qualityWork closely with production and engineering teams to meet delivery targetsMaintain high standards of housekeeping and health & safetyWhat We're Looking For Proven experience setting and operating 5-axis CNC machining centresExperience machining large-format or heavy engineering componentsAbility to read and interpret complex engineering drawingsStrong understanding of tooling, feeds, speeds and machining strategiesExperience working to tight tolerances and demanding quality standardsSelf-motivated with a proactive approach to problem solvingAbility to work effectively both independently and as part of a teamDesirable Experience Heidenhain, Fanuc or Siemens controlsAerospace, defence, energy or heavy engineering backgroundsExperience with large structural or fabricated componentsWhat's On Offer £21.37 per hourOvertime available at enhanced ratesStable, long-term employmentModern manufacturing environmentOpportunity to work on large, technically challenging componentsSupportive and experienced engineering teamApply Now If you're an experienced 5 Axis CNC Machinist looking for a technically challenging role with excellent earning potential, we'd like to hear from you.INDWINOur clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://Many ThanksTPBN1_UKTJ

Fire Risk AssessorTotal Fire Group, part of the wider Ranger Group, is expanding, and were looking for skilled Fire Risk Assessors to join one of the North Wests most respected, UKAS-accredited fire safety consultancies. If youre driven by high standards, professional pride, and genuine career progression, youll feel right at home here. Whether you are at Foundation, Intermediate or Advanced Levels, we'd love to accommodate you with your next career move to join one of our ever-expanding businesses.What Youll GetFoundation Level Fire Risk Assessor (Formally Tier 1) = up to £33,000 per yearIntermediate Level Fire Risk Assessor (Tier 2) = £33,001 - £40,000 per yearAdvanced Level Fire Risk Assessor (Tier 3) = £40,001 - £48,000 per yearNote: The above salary ranges are dependent on experience and qualifications.Flexible/hybrid working: a mixture of office and home-based options.Pension contributions.Private Medical Insurance.Life Insurance.Employee Assistance Programme.25 days annual leave + bank holidays, with the option to purchase additional days.Ongoing training, mentorship and genuine career progression (we also have mentorship days every 4 months, so 3 a year, where our assessors get together to discuss everything fire).You will be put through a 2-6 week mentoring/adjustment period, depending on experience. In this period, you will shadow other assessors, undertake relevant training, complete demo FRAs, and have time to learn the role and read relevant guidance documents. On completion of this period, you will complete live FRAs with a senior supporting you for the duration of your visits on the first two/three FRA batches, until you are ready to complete them on your own.What Youll BringIdeally holding recognised industry qualifications: Level 3/4/5 qualification in fire risk assessment (depending on competency level), fire safetyrelated degree/diploma, HNC/HND.Registration with IFE/IFSM and NFRAR, or EngTech is a strong advantage.Fire Service or fire safety inspection background, with Fire Service College modules (or equivalent) is a strong advantage.Demonstrable experience producing high-quality fire risk assessments across varied commercial and residential premises.Strong observational and problem-solving skills. Attention to detail is a must.Excellent report writing and analytical skills, and strong IT skills with the ability to use computer software/apps to produce quality work.Essential knowledge of social housing fire safety, including Purpose-Built Flats Guidance and Specialised Housing Guidance.Where applicable, the ability to work under mentorship and follow structured guidance and feedback.Where applicable, the ability to handle complex fire safety challenges.What Youll DoConduct comprehensive, high-quality fire risk assessments in the areas of your competency levels for either Foundation, Intermediate and Advanced Levels in line with BS 8674:2025.Manage your own workload, deadlines, and client communication.Evaluate fire safety measures and recommend improvements.Complete fire risk assessments within the required deadlines (usually 5-7 working days, depending on the Client).Stay updated on fire safety regulations, guidance and best practices.Complete other work-related tasks delegated by a Senior.Where applicable, work under supervision to gain experience in fire risk assessment, working towards independent/lone working.Where applicable, liaise with clients, enforcement officers, and regulatory bodies to ensure adherence to the fire risk assessment processes.Where agreed and competent to do so for Advanced level assessors, validate fire risk assessments from lower-tier assessors.Where agreed and competent to do so for Advanced level assessors, deliver guidance and mentorship to junior fire risk assessors.Contribute to a culture of continuous improvement through CPD and mentoring.As an equal opportunities employer, Ranger FS is committed to the equal treatment of all current and prospective employees and does not condone discrimination based on age, disability, sex, sexual orientation, pregnancy and maternity, race or ethnicity, religion or belief, gender identity, or marriage and civil partnership.We aspire to have a diverse and inclusive workplace and strongly encourage suitably qualified applicants from a wide range of backgrounds to apply and join Ranger.TPBN1_UKTJ

We are seeking a Powered Access Engineer to join our dynamic workshop team. You will be responsible for the maintenance, repair, and inspection of powered access equipment, such as scissor lifts. This role requires technical expertise and a focus on safety to ensure that all equipment operates efficiently and meets regulatory standards. Duties as a Powered Access Engineer: Conduct thorough inspections of scissor lift machines to assess repair, replacement, or refurbishment needs, utilising initial field inspection reports. Perform standard diagnostic tests on machine components to determine their condition. Compile a detailed list of required parts and materials for machine preparation work. Perform overhaul, repair, or refurbishment tasks on scissor lifts in accordance with the agreed scope of work, which involves the removal of components, as well as the installation of original or replacement parts. Inspect and test completed machines to ensure they operate at expected performance levels. Specific Skills required for a Powered Access Engineer: Flexibility, organisational skills, and effective time management. Exceptional attention to detail and commitment to quality. Ability to work autonomously and collaboratively within a team. communication and interpersonal skills, fostering positive relationships. Organisational abilities, capable of working efficiently and meeting tight deadlines. Effective problem-solving skills. Knowledge: Level 2 NVQ / City & Guilds Mechanical Engineering, Electrical knowledge would be an advantage. Understanding of hydraulic, and mechanical systems. Familiarity with workshop Health and Safety practices. Internal training in the aspect of Powered Access / Scissor lifts will be given to the successful Candidate. Company Information Who are we? Millers Vanguard are proud to have been supporting all the UKs Supermarket chains for over 40 years, in brief, we are the people in the background ensuring that supermarkets keep the Nation fed! Maintaining a wide and varied range of assets from food production equipment through to loading bay lifts. Our service are as follows: Nationwide reactive maintenance Hygienic Deep cleaning & Planned maintenance services Refurbishment, logistics and installation of equipment We do all of this with the firm foundations of being owned by the global Ali Group, whose turnover is in excess of £4 billion p.a. Our people Despite being a large operation here at Millers Vanguard we still firmly believe in running the business like we have done for the last 40 years, by valuing our biggest asset we have YOUthe employee. Our team of over 380 employees have the advantage of working in state-of-the-art working environments: New Technical response centre Award Winning research, Innovation, and recycling facility Stylish, modern Volkswagen Van We believe in providing you with the very best environment and tools to do the job. Why Join Us Job Specific Uniform & tooling for all roles Company wide fun days and charity events Company Pension 24 Holidays per year plus bank holidays Regular staff treats for employees and their families Monday Friday 08.00am 17.00pm Job Types: Full-time, Permanent Benefits: Company pension Free parking Life insurance Company Events TPBN1_UKTJ

You will work closely with production, quality and engineering to deliver calibration services, support manufacturing with inspection activities, and lead technical documentation efforts. MBDA is seeking an ambitious Mechanical Engineer to join the Calibration & Maintenance team in Bolton.

Quality Technician (Automotive) Bolton Days Role £38,(Apply online only) + Bonus About the Opportunity An excellent opportunity has become available for a QA Technician to join a global automotive technology manufacturer at its Bolton facility. This role offers the chance to work within a highly specialised quality environment, supporting product testing, analysis and continuous improvement initiatives. Key Responsibilities - Quality Technician (Automotive) Analyse customer and field returns to identify defects and root causes. Carry out functional testing and dimensional measurement of new and existing products. Perform product reliability testing in line with customer requirements and project timescales. Produce clear and accurate technical reports detailing investigation findings and recommendations. Operate, inspect and maintain testing and measurement equipment. Support the creation and maintenance of testing procedures and standard operating instructions. Assist with customer and supplier PPAP activities. Support manufacturing operations with containment and quality-related activities when required. Work with Quality Engineers, customers and suppliers to support investigations and corrective actions. Experience/Qualifications - Quality Technician (Automotive) ONC or equivalent qualification within an Engineering discipline. Minimum 2 years' experience within a manufacturing environment. Experience programming and operating CMM equipment. Strong understanding of GD&T and measurement techniques. Experience using test stands and quality inspection equipment. Ability to investigate faults and identify root causes. Strong report-writing and analytical skills. Proficient with Microsoft Office applications, particularly Excel and Word. Excellent communication skills with the ability to work across quality, production and engineering teams. Benefits - Quality Technician (Automotive) Discretionary Annual Bonus (7.5%) Up to 5.5% Employer Pension Contribution Electric Vehicle Scheme via Salary Sacrifice Free EV Charging On Site Private Medical Insurance Death in Service Cover (4x Annual Salary) For more information on this role, please contact Charlie Boulton on (phone number removed), or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include : QA Technician, Quality Technician, Inspection Technician, CMM Technician, CMM Programmer, Quality Inspector, Senior Quality Inspector, Metrology Technician, Test Technician, Manufacturing Technician, Product Validation Technician, Reliability Technician, Mechanical Inspection Technician, Automotive Quality Technician, Laboratory Technician (Manufacturing), Dimensional Inspection Technician. Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process

An opportunity has arisen with my client for an Electrical Fitter to join them on a 12-month contract. As the Electrical Fitter you will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Electrical Fitter Pay: £28.35 per hour via umbrella (rising to £29.70 per hour after 12 weeks) Location: Bolton Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: BPSS Responsibilities: Certify the product in line with Product Certification procedure. Demonstrated ability / willingness to certify own work in line with company quality standards. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Willing to contribute to an environment of process improvement Education/Qualifications Approved Apprenticeship/Apprenticeship Framework/Modern ApprenticeshipOR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3OR Vocational NVQ3 with Further Education, BTEC ONC/HNC Skills/Experince IPC 610 certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable. Manual handling training. Lifting and slinging (including overhead cranes) training. ESD training. Please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Job Title: Asbestos Surveyor Location: Bolton, Greater Manchester Salary/Benefits: £27k - £42k + Training & Benefits A successful Asbestos Consultancy is recruiting for an experienced Asbestos Surveyor to join their team in the North West of England. They are seeking someone who is confident in undertaking the full range of asbestos surveys, across domestic and commercial premises. You will be covering sites across the region, along the M62 and M6 corridors, so ideally, you will be located close to these major routes. We are also able to accept applications from dual Surveyor / Analysts and Site Analysts, as our client has won diverse contracts. Salaries on offer are competitive and benefits include: company vehicle and fuel card. Locations of work include: Bolton, Bury, Rochdale, Oldham, Manchester, Stockport, Altrincham, Wilmslow, Blackburn, Burnley, Wigan, Leigh, St Helens, Skelmersdale, Ormskirk, Southport, Formby, Crosby, Liverpool, Birkenhead, Ellesmere Port, Northwich, Knutsford, Macclesfield, Chester, Preston, Lytham St Annes, Leeds, Huddersfield, Halifax, Bradford, Holmfirth. Experience / Qualifications: • Experience working as an Asbestos Surveyor, Surveyor / Analyst or Asbestos Site Analyst, • Will hold: BOHS P402 and / or P403 and P404 (or RSPH equivalents), • Good working knowledge of UKAS and HSG guidelines, • Adaptable to changing client needs, • Hardworking attitude, • Good literacy, numeracy and IT skills The Role: • Conducting management, refurbishment and demolition asbestos surveys on domestic and commercial premises, • Re-inspection surveys, • Safely obtaining ACM samples for analysis, • For analysts, you will be performing 4 stage clearances and full air monitoring duties, • Producing site-specific technical reports and floorplans, • Providing regular project updates to clients, and answering any technical questions, • Working to agreed deadlines and project scopes, • Liaising with clients and third parties, • Adhering to safety guidelines Alternative job titles: Asbestos Consultant, Asbestos Surveyor / Analyst, Asbestos Analyst, Asbestos Inspector, Asbestis Site Analyst, Environmental Consultant Future Select are the leading market supplier for recruitment in the Asbestos industry; we work with the best clients and candidates and supply the majority of permanent jobs in the asbestos market. We have a large dedicated team, with over 25 years combined industry experience within Asbestos recruitment specifically geared to dealing with Asbestos Surveyors/Analysts/Lab Technicians, Administrators, Project/Regional /Technical/Quality/Training/Sales Managers through to Director Level for both Consultancy & Removal. We have intrinsic knowledge of the market place, as well as respecting candidates/clients confidentiality in this close knit market sector. We are also interested in anyone with p401/p402/p403/p404/p404 or s301 CCP. We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills. Future Select Copyright 2026

MERITUS are recruiting for an Electrical Fitter to join a soveriegn defence manufacturer on advanced production programmes from their site in Bolton. PLEASE NOTE: You must come from a skilled apprenticeship to be eligible for the role. ELECTRICAL FITTER - INSIDE IR35 - £29.02 PER HOUR (RISING TO £30.38 PER HOUR AFTER 12 WEEKS) - BOLTON, UK - 12 MONTHS (LIKELY TO GO PERM) - SINGLE STAGE INTERVIEW PROCESS - SECTOR: DEFENCE HOURS: 37 Hours Per Week + Optional OT CLEARANCE: Must be eligible for SC Clearance The Electrical Fitter will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. The Electrical Fitter will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Specific responsibilities include: • Certify the product in line with Product Certification procedure. Demonstrated ability / willingness to certify own work in line with company quality standards. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. * Willing to contribute to an environment of process improvement Skillset/experience required: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNC • IPC 610 certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable. Manual handling training. Lifting and slinging (including overhead cranes) training. * ESD training., • Certify the product in line with Product Certification procedure. Demonstrated ability / willingness to certify own work in line with company quality standards. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. * Willing to contribute to an environment of process improvement Skillset/experience required: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNC • IPC 610 certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable. Manual handling training. Lifting and slinging (including overhead cranes) training. * ESD training

Job Description As the Registered Manager of a Spectrum Children’s Home, you will be responsible for the day-to-day running of a high-quality residential service that meets the needs of children and young people with complex needs, trauma, and emotional and behavioural challenges. You will ensure full compliance with the Children’s Homes (England) Regulations 2015, Quality Standards, and Ofsted expectations. You will create a safe, nurturing, and therapeutic environment where children are supported to thrive, achieve, and reach their full potential. Key Responsibilities • Ensure the home provides a safe, caring, and nurturing environment in line with the home’s Statement of Purpose., • Lead and manage the staff team effectively, promoting a positive, supportive, and high-performance culture., • Ensure the delivery of personalised, child-centred care plans in collaboration with multi-agency partners., • Maintain full compliance with Ofsted regulations and oversee the home’s readiness for inspections., • Manage safeguarding, incident reporting, and effective risk management in line with organisational policies., • Oversee recruitment, training, supervision, and appraisal of staff, ensuring development and retention., • Maintain robust recording, monitoring, and reporting systems, including internal audits and regulatory returns., • Lead on placement stability, positive outcomes, and transitions for young people., • Work closely with families, local authorities, and external professionals to support each young person’s journey., • Control budgets responsibly and ensure the home remains financially sustainable., • Support Other Homes Within the Region, • Actively participate in regional forums and best practice groups., • Offer mentorship, guidance, and oversight to new or developing Registered Managers or Deputy Managers., • Provide interim support to other homes as required during transition or staffing gaps., • Contribute to the regional improvement and development plan, sharing learning and driving consistency across homes. Skills and Experience • Minimum of 2 years’ experience working in a children’s residential setting within the last 5 years., • At least 2 years in a supervisory or management role in a children’s home., • Level 5 Diploma in Leadership and Management for Residential Childcare (or equivalent) – Essential., • Strong understanding of safeguarding legislation and child protection procedures., • Proven ability to lead, motivate, and manage a multidisciplinary team., • Experience in managing budgets, rota planning, and quality assurance., • Excellent communication, conflict resolution, and partnership working skills., • Successful track record of positive Ofsted inspection outcomes – desirable. Key Competences • Leadership – Inspires, empowers, and develops others to achieve high standards., • Child-Centred Practice – Committed to the emotional and developmental needs of children and young people., • Regulatory Knowledge – Expert understanding of Children’s Homes Regulations, Quality Standards, and Ofsted frameworks., • Resilience – Emotionally robust, calm under pressure, and committed to continuous improvement., • Integrity – Transparent, ethical, and professional at all times., • Strategic Thinking – Ability to align operational delivery with long-term organisational objectives., • Decision-Making – Confident in assessing risks, managing safeguarding concerns, and taking decisive action. Safeguarding Statement Spectrum Children and Young People Services is committed to safeguarding and promoting the welfare of children and young people. We expect all staff and volunteers to share this commitment and to adhere to the highest standards of professional conduct. All appointments are subject to satisfactory enhanced DBS checks and compliance with our safeguarding policies and procedures to ensure a safe environment for those in our care. Hours: Full-Time – 37.5 hours per week (flexible to meet the needs of the service) Salary: • Competitive, • Registration and Opening Bonus, • Annual bonus structure implementation once the home is fully occupied On Call Duties: Participation in the organisational on-call rota, including evenings, weekends, and bank holidays, as required Employment Support & Benefits We value our team and offer a comprehensive employment support package, including: • Wisdom Employee Assistance Program (EAP) – 24/7 confidential advice and support for wellbeing, mental health, legal and financial guidance., • My Perks through HAPi – Access to retail discounts, lifestyle savings, wellbeing resources and employee reward benefits. Reports to: Responsible Individual / Head of Service Work Location: In person

Role: Maintenance & Workshop Technician Location: Bolton Type: Permanent Hours: Days, Monday-Friday Salary: Up to £32,000 per annum depending on experience HRGO Recruitment are recruiting for a Maintenance & Workshop Technician to join a well-established manufacturing business in Bolton. This is a varied, hands-on role suited to a mechanically minded individual who enjoys fault-finding, repairing equipment, working with tools, and supporting workshop operations. You'll be responsible for maintaining production equipment, carrying out general site maintenance, assisting with fabrication and assembly work, and providing support across warehouse and production areas when required. The Role Maintenance & Equipment Support Carry out routine maintenance and repairs on production equipment Service and maintain welders, compressors, band saws and workshop machinery Perform machine adjustments, set-ups and basic fault-finding Maintain welding and grinding extraction systems Support planned preventative maintenance activities Undertake general building and facilities maintenance Liaise with contractors during servicing and inspection activities Workshop & Production Support Assist with assembly, fabrication and installation of components Carry out drilling, tapping, soldering and light fabrication work Support product testing and quality checks Assist with workshop layout changes and machinery relocation Pack, palletise and prepare products for dispatch Warehouse & Stock Control Support goods in and goods out operations Load and unload deliveries safely Assist with stock control and consumables management Support annual and periodic stock takes Ensure materials are stored correctly and work areas remain organised The Candidate Previous mechanical maintenance or engineering experience Comfortable using hand and power tools Experience working with workshop machinery and equipment Practical approach to fault-finding and problem-solving Experience within a manufacturing, engineering or production environment Ability to work independently and manage a varied workload Forklift Truck licence would be advantageous but is not essential Experience with soldering, fabrication or assembly work would be beneficial Experience with Pro Spot equipment would be highly advantageous For further information, please contact Sophie on (phone number removed) or email

My client is looking for several Electrical Test Operators to join them on an initial 12-month basis. As the Electrical Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Electrical Test Operator Pay: £28.35 per hour via Umbrella (rising to £29.70) Location: Bolton Contract: 12 Months (possible extension) Hours: Monday - Friday, 37 hours per week Security Clearance: Security Clearance required however can start on BPSS Responsibilities: Certify the product in line with the product certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant, test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Communicate best practice to other team members.Skillset/experience required: Electrical Apprenticeship in One Of The Following Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 Vocational NVQ3 with Further Education, BTEC ONC/HNCQualifications must be in Electrical Manufacturing/Engineering subjects. Signifiacnt electrical test experince No colour blindness.If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Head of Quality, GMP Location: Greater Manchester Type: Permanent Salary: c£60,000- £65,000 A growing and highly regulated pharmaceutical organisation is seeking an experienced Head of Quality to lead its Quality function and drive continuous improvement across manufacturing, quality assurance, and quality control operations. This senior leadership role is responsible for ensuring regulatory compliance, maintaining an effective Quality Management System (QMS), leading audits and inspections, and developing a high-performing quality team. The successful candidate will play a key role in shaping quality strategy while supporting operational excellence and business growth. Key Responsibilities Lead the Quality Assurance and Quality Control functions across the site. • Develop and implement quality strategies aligned with business objectives. • Maintain and improve the Quality Management System (QMS) and GMP compliance standards. • Lead regulatory, customer, and internal audits and inspections. • Oversee CAPA, deviations, change controls, risk management, and validation activities. • Ensure quality documentation, SOPs, and technical agreements remain inspection-ready. • Monitor and report on quality KPIs and drive continuous improvement initiatives. • Manage departmental budgets, resources, and succession planning. • Coach, mentor, and develop quality teams to deliver high performance. About You Degree qualified in a scientific discipline. • Significant leadership experience within a GMP-regulated pharmaceutical environment. • Strong knowledge of quality systems, regulatory compliance, validation, and risk management. • Proven experience managing audits and inspections. • Excellent stakeholder management, communication, and people leadership skills. • Results-driven with a continuous improvement mindset. What's on Offer Senior leadership position with significant influence across the business. • Opportunity to shape quality strategy within a growing organisation. • Competitive salary and benefits package. • Collaborative and forward-thinking working environment. • This is an excellent opportunity for an experienced quality leader looking to make a meaningful impact within a dynamic pharmaceutical business. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

JOIN EVRI PREMIUM, A NETWORK OF DHL E-COMMERCE THIS SUMMER.Evri Premium, a network of DHL E-Commerce is building a next-generation delivery network and we’re looking for motivated drivers.Whether you already have a suitable van or not, make the most of the brighter, longer summer days ahead wi

Ogilvy UK is seeking a Creative Director with a strong art direction background to lead creative work on our health portfolio.You will balance hands-on leadership with team development to deliver big, effective ideas that meet client and patient needs.You will mentor art directors, designers and cop

The successful candidates will be primarily focused on the hotel rooms, completing high-quality 1st and 2nd fix electrical installations to a tight project schedule.

Experience carrying out initial verification, inspection and testing on three-phase installations.

Closing date: 25-08-2026 Customer Team Member - Home Delivery Driver Location: Kilmallie Road , Caol, PH33 7ENPay: £13.Contract: 12 hours per week + regular overtime, permanent contract, part timeWorking pattern: varied shifts including early mornings (store opening), afternoons, late evenings

Deliver a local round on agreed days and take control of your earning opportunity.Evri delivers over a billion parcels a year through a network of more than 30,000 couriers.Were recruiting self-employed delivery drivers in your area now.We have opportunities ranging from a few agreed days each week

Supporting large, multi-site commercial portfolios with consistent, high-quality service. Strong knowledge of testing, inspection and certification procedures.

As a Production Operative, you will play a vital role in supporting our expanding production lines, ensuring our fresh, high-quality food products are produced safely, efficiently, and to the highest standards for our retail customers. At Natures Way Foods, our vision is to lead the way in fresh- wi

Join Our Logistics Team as a 7.Ton Driver Based in Normanton.Are you a reliable and motivated driver looking for your next challenge? We have a fantastic opportunity for a.Delivering goods efficiently and on time while providing excellent customer service.Adhering to scheduled departure times and c

As a quality inspector or quality engineer this is an excellent opportunity for someone with a manufacturing or engineering background who enjoys hands-on inspection and wants to develop their career within a stable, quality-focused organisation. As an Inspection & Quality Engineer, you will play a

Are you an electrician looking for long term stability in a permanent job?.Would you like to gain new skills in a manufacturing environment?.Are you looking for further development, training, and qualification? Then get in touch!.Kingston Barnes is recruiting for an experienced.This is an excellent

A proactive approach with a commitment to high-quality workmanship.

Are you a passionate and caring individual looking for a rewarding career with excellent training and opportunities for development? Join Care UK, a multi award winning care provider as a Care Team Leader.Leading and supervising your shift.Case managing residents and liaising with families, healthca

Drive continuous improvement initiatives to enhance quality, productivity and delivery performance. Work collaboratively with Systems, Software, Manufacturing, Quality and Supply Chain teams to deliver integrated engineering solutions. Committed to delivering high-quality engineering solutions in a

Proven leadership capability, with experience of developing high performing teams and individuals in a high risk operational environment, and of improving performance through coaching, feedback, KPIs, quality frameworks and structured development.

Field Quality Inspector, Quality Inspector, Sales Executive, Car Sales, Telecoms Sales, Account Manager, Business Development, Purchasing, Quality Control, Recycling, Plastics, Waste Management, Sustainable Materials, Field-Based, West Midlands, Career Development. Field Quality Inspector (Recycling

Location: HMP Highpoint, CB8 9YG.Contract: Full Time, Permanent.We are seeking a dedicated fully qualified Electrician to join our team at HMP Highpoint , a category C & adult/Male prison.Join a team that is more than just a group of colleagues - we work Monday-Friday as a supportive and driven fami

You will take responsibility for installing and commissioning 12V/24V electrical systems andcrimping and soldering.Installing and commissioning electrical systems.Following health and safety rules and regulations.Previous experience installing and commissioning 12V/24V electrical systems.Knowledge o

We are recruiting a Foot Mobile Electrician, for a world famous food and beverage brand.Growth is at the heart of everything our client does.From the freshly hand-made food created each day to the way teams are supported, our client helps people grow in confidence, skills and in pursuing their uniqu

We're so much more than an energy company.We're a family of brands revolutionising how we power the planet.One team of 21,000 colleagues that's energising a greener, fairer future by creating an energy system that doesn't rely on fossil fuels whilst living our powerful commitment to igniting positiv

ELECTRICIANS - HAYDOCK, ST HELENS, MERSEYSIDE (WA11 postcode area).Haydock, St Helens, Merseyside.Commercial/Industrial Electricians.Industrial Installation Work on a warehouse.Upgrade to the emergency lighting.You must have experience of Commercial and Industrial Electrical Installation work and ho

Carrying out regular plant inspections and identifying potential maintenance requirements. Maintaining high standards of health, safety and quality at all times.

Work strictly to RAMS, safety documentation and the safe system of work; maintain quality and installation records.

Receiving instructions and completing reports via PDA, work includes immersion heaters, fans, showers, security lighting, communal lights, domestic electrics, completion of minor works certificates and inspection, testing & remedial work on exchanges and voids.

At Winberry, we partner with some of the UK's leading renewable energy businesses, connecting experienced Solar Electricians and installation teams with high-quality commercial and domestic projects across the country.

This is your chance to get in early with a global leader, establish yourself on quality commercial properties, and build a career that goes somewhere. Work on quality commercial properties. You'll be the site electrician on a quality commercial property in Newbury, handling reactive maintenance, pla

Delivering excellent customer service at each delivery point.Loading and unloading your vehicle.Good knowledge of safe driving practices.Reliable, punctual and customer-focused.Physically fit and happy carrying out manual handling duties.Avonmouth depot due to the start and finish times.Full-time, M

Please double check you have the right level of experience and qualifications by reading the full overview of this opportunity below.Deliver a local round on agreed days and take control of your earning opportunity.Evri delivers over a billion parcels a year through a network of more than 30,000 cou

City & Guilds 2391 (Inspection & Testing) Experience Proven experience working as an electrician. Competent in fault finding, installation, testing, and inspection. Professional, reliable, and committed to delivering high-quality workmanship.

Desireable: Be able to demonstrate a leadership approach to health, safety, quality, and environmental obligations.

Role : HGV Class 2 Plant Delivery Driver Salary : £16.Location : South Manchester Work Pattern : Full time, contract, temporary Were on the lookout for a skilled, reliable HGV Class 2 Plant Delivery Driver to operate a plant wagon, delivering and collecting machinery across Manchester and surroun

Please double check you have the right level of experience and qualifications by reading the full overview of this opportunity below.Deliver a local round on agreed days and take control of your earning opportunity.Evri delivers over a billion parcels a year through a network of more than 30,000 cou