Trabajos pipe en PrestonCrear alertas

Pipefitter/Installation Engineer\n Job Type: Full-time, Temporary until Christmas initially \n Location: Preston Lancashire \n Salary: £23.90 per hour \n Working Hours: Monday to Thursday, 7.00am–4.45pm, with a 30-minute lunch break. 37-hour working week. About the Role\n We are looking for an experienced BPS Fitter / Installation Engineer to join a busy production and installation team. This is a hands-on role supporting the assembly, manufacture and installation of commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems. \n The successful candidate will report to the Production Supervisor and will be confident working from schematic layouts and 3D assembly drawings. You will support high-quality mechanical pipework installation in a factory environment, with occasional work on client sites when required. Key Responsibilities\n\n • Assemble, manufacture and install commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems.\n, • Read detailed schematic drawings and plan pipe systems and related equipment installations.\n, • Measure, mark, cut, thread and assemble pipework components and systems.\n, • Secure pipework using appropriate fixtures, brackets and clamps.\n, • Work with copper, screwed steel, press-fit and crimped pipework systems.\n, • Repair, maintain and support pipe systems, supports and associated equipment.\n, • Carry out strength and tightness testing on gas and water pipework in line with relevant codes and regulatory standards.\n, • Select and safely use hand tools, mechanical tools and equipment for fabrication, installation and repair work.\n, • Apply safe techniques for the temporary or permanent removal of pipework-related systems or components.\n, • Work effectively with others and contribute to positive working relationships within an engineering construction environment.\n, • Ensure all work complies with health and safety requirements, building regulations, company ISO procedures, CDM regulations, risk assessments, quality plans and departmental operating procedures.\nSkills and Experience Required\n\n, • Time-served mechanical pipefitter, heating engineer or similar background.\n, • NVQ Level 3 in mechanical pipefitting, plumbing, heating or equivalent preferred.\n, • Minimum NVQ Level 2 in pipefitting or a relevant trade discipline.\n, • Working knowledge of commercial heating equipment including boilers, pumps, press units and expansion vessels.\n, • Experience installing commercial pipework systems using copper, screwed steel, press-fit or crimped methods.\n, • Ability to read and interpret schematic layouts and 3D assembly drawings.\n, • Good organisational, communication and interpersonal skills.\n, • CSCS card desirable but not essential.\nWhat We’re Looking For\n We are looking for someone who takes pride in their workmanship, understands the importance of safety and quality, and can work confidently as part of an engineering production team. You should be reliable, practical, detail-focused and comfortable working to drawings, procedures and deadlines. Benefits\n\n • £23.90 per hour.\n, • Full-time, temporary opportunity until Christmas initially.\n, • Monday to Thursday working pattern, 7.00am–4.45pm, with a 30-minute lunch break.\n, • Varied work across factory-based manufacture and occasional site installation.\n, • Opportunity to work on commercial heating systems, plantrooms and skid units.\n, • Supportive team environment\nApply Now\n If you are an experienced pipefitter, heating engineer or installation engineer looking for your next opportunity, we would like to hear from you. Apply today with your CV and a member of the team will be in touch. \n Winsearch acts as an employment agency for contract and permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services \n INDWIN \n \n \n Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see Many Thanks

Fitter/Installation Engineer Job Type: Full-time, Temporary until Christmas initiallyLocation: Preston LancashireSalary: £23.90 per hourWorking Hours: Monday to Thursday, 7.00am–4.45pm, with a 30-minute lunch break. 37-hour working week.About the Role We are looking for an experienced BPS Fitter / Installation Engineer to join a busy production and installation team. This is a hands-on role supporting the assembly, manufacture and installation of commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems.The successful candidate will report to the Production Supervisor and will be confident working from schematic layouts and 3D assembly drawings. You will support high-quality mechanical pipework installation in a factory environment, with occasional work on client sites when required.Key Responsibilities Assemble, manufacture and install commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems.Read detailed schematic drawings and plan pipe systems and related equipment installations.Measure, mark, cut, thread and assemble pipework components and systems.Secure pipework using appropriate fixtures, brackets and clamps.Work with copper, screwed steel, press-fit and crimped pipework systems.Repair, maintain and support pipe systems, supports and associated equipment.Carry out strength and tightness testing on gas and water pipework in line with relevant codes and regulatory standards.Select and safely use hand tools, mechanical tools and equipment for fabrication, installation and repair work.Apply safe techniques for the temporary or permanent removal of pipework-related systems or components.Work effectively with others and contribute to positive working relationships within an engineering construction environment.Ensure all work complies with health and safety requirements, building regulations, company ISO procedures, CDM regulations, risk assessments, quality plans and departmental operating procedures.Skills and Experience Required Time-served mechanical pipefitter, heating engineer or similar background.NVQ Level 3 in mechanical pipefitting, plumbing, heating or equivalent preferred.Minimum NVQ Level 2 in pipefitting or a relevant trade discipline.Working knowledge of commercial heating equipment including boilers, pumps, press units and expansion vessels.Experience installing commercial pipework systems using copper, screwed steel, press-fit or crimped methods.Ability to read and interpret schematic layouts and 3D assembly drawings.Good organisational, communication and interpersonal skills.CSCS card desirable but not essential.What We're Looking For We are looking for someone who takes pride in their workmanship, understands the importance of safety and quality, and can work confidently as part of an engineering production team. You should be reliable, practical, detail-focused and comfortable working to drawings, procedures and deadlines.Benefits £23.90 per hour.Full-time, temporary opportunity until Christmas initially.Monday to Thursday working pattern, 7.00am–4.45pm, with a 30-minute lunch break.Varied work across factory-based manufacture and occasional site installation.Opportunity to work on commercial heating systems, plantrooms and skid units.Supportive team environmentApply Now If you are an experienced pipefitter, heating engineer or installation engineer looking for your next opportunity, we would like to hear from you. Apply today with your CV and a member of the team will be in touch.Winsearch acts as an employment agency for contract and permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional ServicesINDWINOur clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://Many ThanksTPBN1_UKTJ

PCV Pipe Fitter responsible for the Assembly and Installation of pipework in the workshop and onsite. Responsible for timely and accurate system installations to include amongst other duties, installation of cable tray, ABS pipework, tanks, systems and ring mains. Experience of PVC Pipe fitting or S

AWC Staff Services are looking for experienced Water Site Managers for permanent roles for one of our major clients. You'll drive day-to-day activities on our mains renewal schemes as part of our Operations Team. Based mainly north of Preston, you’ll also cover other sites when needed. Leading site teams, you’ll report to the Project Manager, set clear daily and weekly targets, co-ordinate resources, and ensure delivery to the highest standards. You’ll support SHEQ, conduct toolbox talks, manage quality, liaise with clients and highways, and deliver schemes such as open cut, slip lining, pipe bursting, and directional drilling, always ensuring water quality regulations are met. What you’ll bring • Do you have water industry knowledge and experience?, • Do you hold water SHEA or CSCS card, plus NRSWA Supervisor qualifications?, • You’ll require SSSTS (or equivalent) and a full UK driving licence., • Experience managing subcontractors and direct teams., • Strong understanding of CDM, site decision-making, and ensuring team compliance. In return our client offer excellent salary and benefits packages including company car

Johannigman Excavating is seeking a skilled Pipe Layer to join our 4-person utility crew outdoors, installing storm, sanitary, and water piping to grade and specifications.

Advanced Resource Managers Ltd is recruiting a Pipe Quality Inspector for a major CCS project on Teesside. The role involves inspecting pipe materials prior to installation, ensuring documentation is complete and materials are handled per project standards. We require a minimum of 6 years' experienc

Minimum 6 years' experience as a Pipe Quality Inspector, Pipe Inspector or in a similar pipe quality role on major construction or industrial projects. Working closely with the Project Logistics Manager, you will be responsible for inspecting pipe materials, identifying damage or quality issues, and

A leading engineering recruitment firm is seeking experienced Pipe Fitters for an industrial shutdown near Hull. The role involves working from drawings, cutting, bending, and installing carbon and stainless steel pipework, as well as testing piping systems for leaks. Candidates should have a CCNSG

The candidate must be able to measure (point to point) to enable fabrication and understand pipework isometric drawings to enable fabricating/installing new pipework. We are currently looking to recruit a time served pipe fitter for a very long-term role (permanent for right person) in they Stalybri

Pipe Inspector or in a similar pipe quality role on major construction or industrial projects. Working closely with the Project Logistics Manager, you will be responsible for inspecting pipe materials, identifying damage or quality issues, and ensuring all equipment is received, stored and handled i

Repairing or replacing damaged pipes, valves, or fittings. NVQ / City & Guilds qualification in Pipe Fitting trade. Integrate Engineering Resources are currently recruiting for additional Pipe Fitters on behalf of our clients for an industrial shutdown near Hull.

Duration: 3 Months (Possible Extension).Office working: 4 days in the office, 1 day remotely.Duration: 3 Months (Possible Extension).Office working: 4 days in the office, 1 day remotely.During Detail Engineering, perform Piping Stress Analysis of high temperature piping systems using a combination o

Sales Account Manager responsible for advising partners' merchants on financial solutions, managing the sales cycle from prospecting to closing, and ensuring seamless onboarding and activation.

Pipefitters needed in Southampton for a commercial project, mainly cooper and screw works.

Seeking an experienced Pipe fitter for weekday work in Redditch, with experience in ductwork and sheet metal.

Experienced pipe fitter needed for a 4-month contract in Lincoln, working with stainless steel and interpreting engineering drawings. Responsibilities include bending and forming tubing, assembling pipe assemblies, and maintaining cleanliness.

Join HomeServe as a Water Supply Pipe Engineer and play a vital role in keeping our customers' homes running smoothly.

Considering making an application for this job Check all the details in this job description, and then click on Apply.We are working with a leading supplier of mechanical engineering services, fabrications and equipment to major UK companies in the manufacturing and civil engineering industries.We h

Seeking a Pipe Fitter for a commercial pipefitting project in Cambridge.

Due to our continued success, we are looking to recruit a fully skilled Pipe Welder/Fitter, Mild Steel Fabricator and Stainless Steel Fabricator. Various levels of pipework, experience in food industry environments, an understanding of the water and energy industries.

Pipe Fitter needed for weekday work in Redditch, with pay between £18-£23 per hour.

Pipe fittersLocation CorbySalary £19. Due to our continued success, we are looking to recruit a fully skilled Pipe Welder/Fitter, Mild Steel Fabricator and Stainless Steel Fabricator. Various levels of pipework, experience in food industry environments, an understanding of the water and energy indu

Experienced Pipe Fitter needed for installation work in a plant room environment in Cambridge.

We are seeking a skilled and reliable.The successful candidate will install, assemble, maintain, and repair piping systems used in commercial, industrial, or construction environments.This role requires a strong commitment to safety, quality workmanship, and teamwork.Read the overview of this opport

Recruit4staff are representing a well-established steel fabrication business in their search for a Fabricator Welder to work in Oswestry Job Details: Pay: £15.Hours of Work: Monday - Friday: 08:00 - 17:00 Duration: Temporary - Up to 4 weeks but has potential to extend.However, client will consi

Multitask recruitment are looking for Semi Skilled Welders in the Blackburn area! If you have a strong work ethic, take pride in producing high-quality workmanship, and have experience working with heavy steel fabrications, we want to hear from you.The Role MIG welding Measuring, marking out, cuttin

Groundworker (with Forward Tipping Dumper) needed in Bensham NE8.Commercial Site - 278 Works, Working around services, Stoning up, Pin Kerbs etc.Opportunity at ongoing work available.Rate is negotiable - we can pay CIS, Umbrella and PAYE.CSCS Card and previous experience is essential.Roller ticket d

Rise Technical in Coventry is recruiting a Shift Maintenance Plumber / Mechanical Engineer to service a large hospital site on a 4 on, 4 off days and nights pattern.You will perform planned and reactive mechanical maintenance, fault finding and general plumbing works with substantial overtime and op

Wren Kitchens is recruiting for General Production Operatives at our Howden site to work on a day shift from 06:00 to 14:30, Monday to Friday.You will join a warehouse team across Assembly, Goods In, MSU E-Picks and Production, handling stock, picking and packing, and loading orders.Responsibilities

Our client is currently recruting experienced warehouse operartives to join their busy operation in Taunton.Monday to Friday) Dutes include loading / unloading.Stacking goods on to pallets along with general warehouse duties.There will be some heavy lifting involved and the goods can weigh upto 20kg

Career Choices Dewis Gyrfa Ltd is seeking a Multi-Drop Delivery Driver / Warehouse Operative.This hybrid role combines delivering bathroom products with day-to-day warehouse duties in a full-time, temp-to-perm setting.Expect early starts and a 40-hour week with overtime after 40 hours.Competitive ho

Barker Ross Recruitment are currently recruiting for several Warehouse Operatives/Handballers for one of our clients, a leading cold store business based in Grimsby.Shifts available with part-time and full-time options, including 22:00–06:00, 14:00–22:00 and 06:00–14:00, Monday to Friday.Dutie

Warehouse Operative/FLT Driver £33,150 per annum Hours of Work: Mon to Weds: 07:30 to 17:00, Thurs & Fri: (Alternating Shift) 07:30 to 17:00 / 08:00 to 17:30 Great working environment Personal development Free parking We are currently recruiting on behalf of our client for an experienced FLT/Wa

JDR Recruitment are recruiting for a Warehouse Operative / FLT driver to join our client based in Middlewich CW10 This is a fantastic opportunity to our client who is growing business, this position is temporary to permanent Location: Middlewich CW10 Salary: £13.Hours of Work: Monday to Friday 8am

Metalis Engineering Recruitment Limited is seeking an experienced Fabricator for MIG & TIG welding in Leicester, LE9.You will fabricate high-end display units from engineering drawings, welding stainless steel, aluminium and mild steel to a premium finish.Working Monday to Friday, 8:00am–4:30pm, w

Smart Manufacturing Solutions are recruiting on behalf of one of our clients.We are looking for a skilled and motivated Fabricator to join the production team.You'll be responsible for manufacturing high-quality products from engineering drawings while ensuring accuracy, efficiency, and compliance w

ReeVR Talent are looking to recruit a Fabricator to join our client’s high-precision Manufacturing team.This is an excellent opportunity for a skilled Fabricator with strong precision metalworking experience to secure a long-term role within a well-established and growing business working with hig

Rise Technical are seeking a Fitter / Fabricator in Bristol for a permanent, Monday - Friday days-based role.You will work on large stainless steel assemblies, using MIG and TIG welding, fitting and mechanical assembly, with full product training and regular overtime.Based at their purpose-built HQ,

Aspire Defence Services Ltd is seeking an Apprentice Plumber/Gas Engineer to support the delivery of maintenance activities while completing a Level 3 Plumbing & Domestic Heating Technician Apprenticeship.The role is based in Tidworth, requiring one day per week at Wiltshire College.Applicants shoul

ReeVR Talent is recruiting a Fabricator to join a high-precision manufacturing team.This permanent, full-time role offers Monday–Thursday shifts with overtime and a clear path to a long-term career in a company working with high-performance materials.You will fabricate components to tight toleranc

We are looking for an experienced Plumber to join a static site maintenance team based in York.This is a great opportunity for someone looking for a stable, site-based role with regular hours, optional overtime, and no on-call requirement.You’ll be responsible for carrying out a range of planned a

Salary: £31,236 to £33,951 per annum.Introduction to YSJ university.Situated in the heart of the historic city of York, and with the addition of our London Campus, York St John University has a long and proud tradition as adistinguished higher education provider.Our success is founded on the quali

Factory Labourer Location: Wisbech Job Type: Temporary Hours: Monday to Friday, 07:0015:30 Hours per week: 40 hours We are looking for a reliable and hardworking Factory Labourer to join our team in Wisbech on a temporary basis.The successful candidate will carry out a variety of practical duties wi

Job Title: Driver / Labourer Location: London and surrounding areas Salary: £120 per day Job Type: Full-time, Permanent Blackburn & Co Ltd is an Essex-based metal fabrication company specialising in the manufacture and installation of mild steel metalwork, including staircases, handrails, balus

We are looking to create a dedicated Site Response & Maintenance Team to support our operational sites across the business.This team will act as a practical response group, carrying out repairs, maintenance, small construction works and general site improvement activity across our buildings, yards,

Full time (35 hours) Monday to Friday.Participation in an on-call rota for out of hours cover.As we have a high volume of applications for our vacancies.If you have applied for this role in the last 3 months and not been successful, our practice is usually not to consider another application for 3 m

Were looking for Labourers for a New Student Accommodation project in Falmer.Time and a half on weekends Requirements:.Previous experience as a General Labourer on construction sites.Good understanding of site health & safety and manual handling.PPE References As a Labourer, your duties will be swee