Mechanical engineering technician jobs in HarpendenCreate job alerts

Trainee EngineerHemel Hempstead \n £25,000 to £27,000 Basic + Full Training + Career Progression + Bonus + Gain Qualifications + Pool Car + Fuel Card \n Work for a company that will invest in your future by supporting you through additional qualifications and help to kick start your career in a thriving industry as a trainee engineer. Work within a highly skilled team where you will constantly be learning and progressing your knowledge and earnings. \n This company provides, services and installs a variety of equipment used in the film and entertainment industry UK wide. Great opportunity for a trainee engineer to join a supportive and progressive employer, whilst enjoying working in a fantastic and ever developing sector. Your Role As A Trainee Engineer Will Include: \n • Trainee Engineer - Workshop based with some site / client visits Installing, maintaining and servicing company equipment Hands on engineering work - with some electrical and mechanical work. \n As A Trainee Engineer You Will Need To Have: \n • Any hands on mechanical / electromechanical / Labouring / electrical engineering skills - fitting / assembly - ANY CONSIDERED Desire and attitude towards learning and development Full driving licence * Live commutable to Hemel Hempstead \n Please apply or contact Charlie Auburn for immediate consideration \n Keywords: Trainee engineer, mechanical engineer, electro-mechanical, technician, service technician, engineer, Ex Forces, installation, labourer, electrical, trainee, Hemel Hempstead, HP, St Albans, Watford, London. \n This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted

Workshop Engineer \n Location: St Albans, Hertfordshire \n Salary: £37,500 per annum \n Hours: Monday to Friday, 8:30am – 5:00pm \n The Opportunity \n An established and market-leading manufacturer is seeking a Workshop Engineer to join its busy service and repair team based in St Albans. This is an excellent opportunity for an engineer with experience in servicing, repairing, and maintaining equipment within a workshop environment. \n The successful candidate will be responsible for diagnosing faults, carrying out repairs, performing routine maintenance, and ensuring equipment is returned to customers to the highest standards of quality and safety. \n Key Responsibilities \n\n • Diagnose mechanical and electrical faults on a range of equipment.\n, • Carry out servicing, maintenance, and repairs within the workshop.\n, • Complete inspections, testing, and quality checks before equipment is returned to customers.\n, • Accurately record work completed and maintain service documentation.\n, • Ensure workshop tools, equipment, and work areas are kept clean and organised.\n, • Adhere to all company health and safety procedures.\n, • Work collaboratively with colleagues to achieve service and repair targets.\n, • Deliver high standards of workmanship and customer service.\n\n Requirements \n\n • Previous experience in a workshop engineering, service engineering, maintenance engineering, or technician role.\n, • Strong fault-finding and diagnostic skills.\n, • Mechanical aptitude with the ability to repair and maintain equipment efficiently.\n, • Basic electrical knowledge would be advantageous.\n, • Ability to work independently and as part of a team.\n, • Good organisational and communication skills.\n, • A proactive and positive approach to problem solving.\n\n What's on Offer \n\n • Salary of £37,500 per annum.\n, • Monday to Friday working hours with no regular weekend requirement.\n, • Stable, long-term career opportunity with a recognised industry leader.\n, • Full product training provided.\n, • Supportive team environment and opportunities for development.\n\n If you are an experienced Workshop Engineer, Mechanical Technician, Service Technician, or Maintenance Engineer looking for your next challenge, we would like to hear from you.

CP22508 Mobile Forklift Engineer £40,000 St Albans North London / Bucks / Beds / Herts (Based from St Albans) Alecto Recruitment is working with a market‑leading materials handling specialist who are one of the most established and respected companies in the industry. Founded in 1985, they've built a reputation for exceptional engineering standards, a modern fleet, and outstanding customer service. This represents an exciting opportunity to join a stable, long‑standing business that continues to invest in ongoing development, manufacturer training, and genuine engineer progression. A standout in this role is the culture: They put engineers first, offer excellent training, provide flexible working, run cutting‑edge systems, and genuinely care about your long‑term development and career growth. Salary & Benefits: £35,000-£40,000 Mann van you can take home Monday-Friday, 8:00-17:30 Strong training & development Long‑term progression Established business with 40+ years of industry expertise The Role: Mobile Forklift Engineer covering London, Bucks, Beds & Herts Servicing, maintenance, repairs & diagnostics Working on a variety of forklifts & warehouse equipment Fault finding, hydraulics, electrical work Customer‑facing, independent role with strong support Mix of planned maintenance and reactive breakdowns Requirements: Any solid mechanical background considered Forklift, plant, HGV, automotive, agricultural or similar Confident with servicing, repairs, diagnostics Reliable, self‑sufficient, customer‑focused Looking for progression, stability, and a company that values engineers If you're an experienced Engineer looking for progression, a fresh challenge, or a business that genuinely values your expertise, we want to hear from you. Send your CV to (url removed) or call (phone number removed) for a confidential chat. INDHP Forklift Engineer, Mobile Engineer, Materials Handling, Plant Engineer, HGV Technician, Mechanical Engineer, Hydraulics, Diagnostics, Service Engineer, Field Service, Warehouse Equipment, Reach Trucks, VNA, Bendi, Flexi, LOLER

Workshop Technician (Industrial Cleaning Equipment) Location: St Albans, Hertfordshire (commutable areas considered) Salary: £35,000 – £38,000 basic Job Type: Full-time, Permanent Hours: Monday to Friday, 40 hours per week (days only) + overtime at 1.5x The Company Interaction Recruitment has partnered with a rapidly expanding and innovative organisation within the industrial cleaning equipment sector. Due to continued growth, our client is looking for a skilled Workshop Technician with an electromechanical background who is eager to learn, develop, and progress within a specialist engineering environment. The Package 25 days annual leave + bank holidays (33 days total) Overtime available at 1.5x Company pension scheme Structured 12-week onboarding and training programme Comprehensive training in electrical and mechanical fault-finding and repair Ongoing internal and external training (products and certifications) Clear progression routes into senior and management positions The Role Carry out servicing, maintenance, and repairs on a range of industrial cleaning equipment Perform electrical, mechanical, and electronic fault-finding Work on engines including petrol, diesel, and LPG systems Use a variety of hand tools, power tools, lifting equipment, and hot work tools Manage workload effectively to ensure work is completed to a high standard Complete job reports and order parts when required Ensure all health and safety procedures are followed Requirements Electrical and/or mechanical fault-finding, service, and repair experience Strong engineering background (e.g. plant, maintenance, hydraulic, pneumatic, or mechanical fitting) Experience working with engines and diagnostic tools (desirable) Familiarity with electrical and mechanical tools Engineering qualifications (NVQ/City & Guilds) – advantageous but not essential Full UK driving licence About Interaction Recruitment Interaction Recruitment supports clients and candidates across a wide range of sectors, including Technical & Engineering, Industrial, Commercial, Finance & IT, and Hospitality. We provide both temporary and permanent recruitment solutions. For more information or to discuss this opportunity, please contact: Julius Okmanas (phone number removed) (url removed) Similar roles: Plant Fitter, HGV Mechanic, Forklift Engineer, Plant Engineer, Vehicle Mechanic, Agricultural Engineer, Workshop Engineer. INDTE Thank you for your interest — we look forward to speaking with you

Equipment Technician Location: Luton We are seeking an experienced Equipment Technician to join a busy semiconductor manufacturing facility, supporting the maintenance, repair, and continuous improvement of wafer fabrication equipment. This is a hands-on engineering role where you'll play a key part in maximising equipment uptime, troubleshooting complex faults, and driving process reliability. Working closely with Manufacturing, Process Engineering and Equipment Engineering teams, you'll ensure critical production tools remain operational while identifying opportunities to improve performance and reduce costs. Key Responsibilities: Maintain greater than 80% uptime across key semiconductor process equipment. Diagnose and repair complex equipment faults, including PCB repair to component level . Troubleshoot electrical, electronic and mechanical issues on manufacturing tools. Support technicians and manufacturing teams with technical guidance and fault resolution. Work collaboratively with Process Engineers, Equipment Engineering and Production teams to minimise downtime. Identify and implement continuous improvement and cost reduction initiatives. Assist with planned maintenance, equipment upgrades and improvement projects. Develop and maintain maintenance procedures and technical documentation. Liaise with OEMs, subcontractors and service engineers during equipment repairs and installations. Ensure all work is carried out safely and in accordance with cleanroom and site procedures. What We're Looking For: Essential: HNC/HND (or equivalent) in Engineering, Electronics, Science, Materials Science or a related discipline. Strong fault-finding experience on complex manufacturing equipment. Ability to diagnose and repair electronic PCBs to component level . Excellent electronics knowledge with hands-on troubleshooting skills. Strong mechanical aptitude and willingness to carry out equipment maintenance and mechanical repairs. Proven problem-solving skills within a manufacturing or engineering environment. Experience documenting maintenance procedures and technical processes. Ability to work effectively with suppliers, contractors and cross-functional engineering teams. Excellent communication skills, both written and verbal. Desirable: Experience within a semiconductor wafer fabrication or cleanroom manufacturing environment. Knowledge of wafer fab process equipment. Experience supporting Epitaxy, Ion Implant or Passivation equipment. Experience with Lean Manufacturing, 6S , Kaizen or Continuous Improvement methodologies. Track record of improving equipment reliability and reducing downtime. Please get in touch with Christina McGuire to hear more! TPBN1_UKTJ

As a Mechanical Manufacturing Technician, you will play a key role in the production, repair, and modification of company products, ensuring all work is completed to the required build standards, specifications, and quality expectations. A Mechanical or Electrical Engineering/Manufacturing Apprentic

Field Service Engineer (Mechanical or Electrical) Covering North/North East London Outside M25 - Watford, Chelmsford, Aylesbury and surrounding £35,000 - £45,000 + Company Vehicle + Door-to-Door Pay + Full Training + Overtime + Bonus + Pension + Private Medical + Life Insurance Do you have experience working in a field service or maintenance environment, with either a mechanical or electrical bias? Are you looking for a field-based position within the renewable energy sector that offers full training, autonomy, overtime and long-term development? This company is a leading provider of low-carbon fuel solutions, supporting the UK transport industry with an expanding network of specialist refuelling infrastructure. Due to continued growth, they are looking for an Operations & Maintenance Technician to join their team covering the Southeast. In this role you will help ensure specialist refuelling sites remain safe, reliable and operational. Your duties will include routine inspections, planned and reactive maintenance, basic fault finding, minor repairs and supporting contractors on site. Full training will be provided over approximately 3-6 months, with the company happy to consider candidates from a range of transferable field service backgrounds. This could include forecourt field service, water, telecoms, utilities or similar, providing you have a practical mechanical or electrical background. This is an ideal opportunity for a field-based technician looking to develop their skills within a growing and future-focused industry. The role: Field-based role covering Southeast England. Company vehicle and fuel card provided. Door-to-door pay. 3-6 months full training provided. 1 in 5 call out rota (after training period) Planned and reactive maintenance. Routine site inspections and basic fault finding. Supporting contractors and ensuring safe working practices. *Participating in a call-out rota following training. The person: Experience in a field service, maintenance or engineering environment. Mechanical OR electrical bias. Strong practical aptitude and willingness to learn. Full UK driving licence. Comfortable working independently and travelling regularly. Experience in forecourt, water, telecoms, utilities or similar is advantageous. Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Nathan Williams at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Senior CHP Field Service Engineer | CHP, LFG, Biogas & AD | £60,000–£70,000 (nego, DOE) + Company Vehicle + Benefits This role won't suit everyone. It's built for a senior engineer who's ready to run a region without day-to-day supervision. Our client is a profitable, debt-free gas-engine and CHP operator. This role gives one engineer day-to-day ownership of five generation sites across landfill gas, anaerobic digestion and CHP, with the autonomy to plan your own diary and an experienced team behind you when needed. The Role • Technical ownership of a five-site portfolio of Jenbacher, MWM and Scania gas engines (150kW–1MW), • Diagnose mechanical, electrical and controls faults, working from root cause rather than parts-swapping, • Plan your own servicing, site visits and follow-up work, using remote monitoring to judge when a site visit is needed, • Contribute to major 10,000hr and 20,000hr services, overhauls and rebuilds alongside experienced colleagues and specialist contractors, • Decide when a job needs a second pair of hands or a contractor, and when to stop work on safety grounds The working week • Gensets are grid-connected with remote access, so most faults are triaged from a laptop before anyone gets in a van, • Issues that can't be resolved remotely and need out-of-hours attendance come up roughly once a month, not weekly, • No formal on-call rota – if something can't be resolved remotely out of hours, contractors are available to attend, and anyone who does attend is reimbursed with time off in lieu, • A 40-hour week, roughly half planned and half reactive, with flexible start and finish times, • Mix of site and home-based working, with your own stock, sites and admin – not managed by a central desk You'll be • An experienced engineer, comfortable running a region without day-to-day supervision – this is not a role for someone who needs close direction or is early in their career, • Substantial hands-on gas-engine maintenance and fault-finding experience, • Strong mechanical foundation with practical electrical and controls capability, • Background in CHP, landfill gas, anaerobic digestion, biogas or comparable gas-engine environments, • Confident making technical decisions independently, including when to call in a contractor or stop work on safety grounds, • Full UK driving licence What's on offer • £60,000–£70,000 basic, negotiable depending on experience, • 5% employer pension contribution, • 25 days' holiday, • Company van or pickup, private use available, • Time off in lieu for out-of-hours work, • Ongoing training and support with professional development, including funded day-release study for engineers working towards further qualifications (including degree level) This is a confidential search handled exclusively by Renew Consultancy. To apply, or to discuss the role in confidence before applying, contact Harriet Janman. Also known as: Senior CHP Engineer, Senior Gas Engine Engineer, Senior Gas Engine Technician, Senior Field Service Engineer, Generator Field Service Engineer, Power Generation Engineer, Power Generation Technician, Senior Engineering Technician, Operations Engineer, Operations Technician, Landfill Gas Engineer, Biogas Engineer

We are seeking an Electronic Technician, with electrical assembly experience, to work for a manufacturer of scientific equipment based in Hemel Hempstead. The Electronics Technician is responsible for the electrical assembly, integration and calibration of systems that are assigned to them. Working from defined build documentation, they will ensure all tasks are completed safely, efficiently and on time. Key Responsibilities • Carry out build of the electrical and electronic assembly in line with agreed schedule, to ensure on time delivery of project. • Ensure the build is documented correctly following standard operating procedures. • Integrate and calibrate equipment, following standard operating procedures and testing protocol • Ensure an Electronics review is completed and address any shortfalls. • Perform quality control inspections, fault diagnosis, troubleshooting, and resolution of electrical hardware issues as required. Essential Skills and Experience • Minimum of 3 years’ experience in an electrically-biased role, with demonstrated exposure to electrical assembly • Technical qualification in an electrical engineering discipline, either vocational or academic. • Manually dexterous, able to use tools appropriately to assemble products, with a background in mechanical assembly • Understanding of circuit diagrams • Understanding of analogue and digital electronics Key words: electrical engineer electrical engineering electrical assembly engineer electrical assembly technician electrical technician electronic engineer electronics engineer electronics engineering electronic engineering electronic assembly engineer electronics assembly engineer electronic assembly engineer electronic assembly technician electronics assembly technician electronic engineer electronics engineering electrician panel assembly technician

Workshop Engineer Location: St Albans, Hertfordshire Salary: £37,500 per annum Hours: Monday to Friday, 8:30am – 5:00pm The Opportunity An established and market-leading manufacturer is seeking a Workshop Engineer to join its busy service and repair team based in St Albans. This is an excellent opportunity for an engineer with experience in servicing, repairing, and maintaining equipment within a workshop environment. The successful candidate will be responsible for diagnosing faults, carrying out repairs, performing routine maintenance, and ensuring equipment is returned to customers to the highest standards of quality and safety. Key Responsibilities • Diagnose mechanical and electrical faults on a range of equipment., • Carry out servicing, maintenance, and repairs within the workshop., • Complete inspections, testing, and quality checks before equipment is returned to customers., • Accurately record work completed and maintain service documentation., • Ensure workshop tools, equipment, and work areas are kept clean and organised., • Adhere to all company health and safety procedures., • Work collaboratively with colleagues to achieve service and repair targets., • Deliver high standards of workmanship and customer service. Requirements • Previous experience in a workshop engineering, service engineering, maintenance engineering, or technician role., • Strong fault-finding and diagnostic skills., • Mechanical aptitude with the ability to repair and maintain equipment efficiently., • Basic electrical knowledge would be advantageous., • Ability to work independently and as part of a team., • Good organisational and communication skills., • A proactive and positive approach to problem solving. What's on Offer • Salary of £37,500 per annum., • Monday to Friday working hours with no regular weekend requirement., • Stable, long-term career opportunity with a recognised industry leader., • Full product training provided., • Supportive team environment and opportunities for development. If you are an experienced Workshop Engineer, Mechanical Technician, Service Technician, or Maintenance Engineer looking for your next challenge, we would like to hear from you

Mechanical Engineer/ Installer A leading engineering company specialising in the waste water, water treatment, and environmental sectors is looking for an experienced Mechanical Fitter / Mechanical Installer to join its growing engineering team. This is an excellent opportunity for a skilled Mechanical Engineer, Mechanical Fitter, or Mechanical Installer with experience installing, maintaining, and repairing mechanical equipment on waste water, water treatment, utilities, or industrial engineering projects. The company continues to invest in major engineering projects across the UK, offering long-term career stability and progression. Location: Luton Salary: £20–£21 per hour Working hours: 40 - 48 hours a week Permanent PAYE Position What's on Offer • £20–£21 per hour, • Minimum 40 hours per week guaranteed, • Permanent PAYE role, • Company van (where applicable), • Laptop and mobile phone, • Company pension, • Life insurance (up to 4x salary), • 33 days holiday, increasing with service, • Mental health & wellbeing support, • Enhanced paternity & maternity leave, • Clear engineering career progression, • Stable, long-term work within the waste water engineering industry The Role As a Mechanical Fitter / Mechanical Installer, you will be responsible for the installation, maintenance, servicing, and repair of mechanical equipment across waste water treatment works, pumping stations, and other engineering sites. Working alongside experienced Mechanical Engineers and installation teams, you will install and maintain a wide range of mechanical systems while ensuring projects are completed safely, efficiently, and to a high engineering standard. Key Responsibilities • Installation of mechanical equipment on waste water and water treatment sites, • Mechanical fitting of pumps, motors, gearboxes, valves, pipework, and associated mechanical systems, • Mechanical maintenance, servicing, and repair of engineering equipment, • Mechanical fault finding and troubleshooting, • Reading and interpreting engineering drawings and mechanical schematics, • Installing and aligning rotating mechanical equipment, • Planned preventative maintenance (PPM), • Supporting breakdowns and reactive mechanical repairs, • Working closely with Mechanical Engineers, Site Engineers, and Project Engineers, • Ensuring all installation and mechanical engineering work complies with Health & Safety requirements, • Completing risk assessments and following method statements Requirements • Engineering apprenticeship, NVQ, City & Guilds, or equivalent Mechanical Engineering qualification, • Previous experience as a Mechanical Fitter, Mechanical Installer, Mechanical Engineer, Maintenance Fitter, or Industrial Fitter, • Experience working within waste water, water treatment, utilities, process engineering, industrial engineering, or heavy engineering environments, • Strong knowledge of pumps, motors, valves, mechanical pipework, and rotating equipment, • Ability to read engineering drawings, • CSCS card or equivalent, • EUSR Water Hygiene, IPAF, PASMA, Confined Space, or Abrasive Wheels tickets are advantageous, • Full UK driving licence preferred, • Strong communication skills with the ability to work independently and within an engineering team Ideal Background Applications are welcomed from candidates who have worked as: Mechanical Fitter Mechanical Installer Mechanical Maintenance Engineer Mechanical Engineer Pump Engineer Site Mechanical Engineer Industrial Fitter Maintenance Fitter Water Treatment Engineer Waste Water Engineer Mechanical Technician Field Service Mechanical Engineer Apply NOW

Senior/Principal/Mechanical Engineer My client is an engineering design consultancy working closely with a wide range of clients, across a number of disciplines within the UK rail and utilities industries. Full time role from the St Albans Office with occasional site visits for which travel expenses will be paid. Hybrid working possible when required provided agreed in advance. Can be contract (outside IR35) or permanent role. Responsibilities: Provide design deliverables that satisfy safety and quality requirements. Produce design calculations and drawings for the water industry Direct and develop CAD technicians. Prepare scopes for and check output of subcontract M&E design teams Liaise with, prepare specifications for and review tender responses from equipment suppliers and manufacturers Prepare design investigations, reports and specifications. Design in compliance with relevant technical, professional and group standards. Ensure project change for design package is fully implemented and recorded. Estimate hours required for design packages Present at and attend meetings and design presentations Essentials: 5-10+ years' mechanical design experience in the UK water industry Graduate, HND or significant experience from technician level Good level IT Registered with professional body and working towards chartership Desirables: Chartered engineer Awareness of electrical design and control systems Experience in hydraulic design Experience in UMON schemes Experience in wastewater and clean water, infra and non-infra Awareness of construction methods and materials. Knowledge of engineering drawing practices. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

Our client is a successful manufacturer of scientific and laboratory equipment. They are seeking an experienced Mechanical Engineer to work from their site in Hemel Hempstead. Job Summary: The role requires a mechanical engineer to design and modify laboratory scale equipment for use in chemical research and development. This may be part of a more elaborate assembly that may include piping, Swagelok fittings as well as various valves and sensors. In other cases, similar existing apparatus may need to be modified or extended involving both design and then assembly and testing. Normally you will work as part of a team to define the project scope and objectives, involving all relevant stakeholders and ensuring technical feasibility. Responsibility will include the selection and maintenance of all production, test and quality control equipment required for supply of mechanical parts. Exceptional skills and experience in assembly and testing of mechanical parts is essential. Essential Skills and Experience: • Experience with 3D CAD Packages preferably Autodesk Inventor (Solidworks, or similar is a possibility), • Experience with tight tolerance design engineering and producing suitable engineering drawings for outsourced manufacture., • Proven background in assembly and use of hand tools, machine tools and CNC equipment., • Ability to effectively work on and manage many projects and priorities at one time., • A track record of getting things done on time, within tight deadlines and on budget., • Competent in the use of Microsoft Office (Word, Excel, PowerPoint, and Outlook) email and use of the Internet Desirable Skills and Experience • Strong assembly, machining & welding skills, • Ability to work under pressure of multiple projects and tight deadlines, • Excellent troubleshooting skills, • Ability to be flexible in work schedule and accommodate unexpected work changes., • Ability to work effectively both interdepartmentally and internationally, • Knowledge of other languages would be helpful Key words: mechanical design engineer mechanical engineer mechanical engineering imeche graduate mechanical engineer graduate mechanical design engineer assembly engineer assembly technician autocad engineer autocad technician