Offres mechanical engineering technician à HytheCréer des alertes d'emploi

Your new company We are looking for a practical, hands-on Engineering Technician to join a busy port operation, supporting the safe, reliable and efficient running of key operational equipment and site facilities. The role will involve planned and reactive maintenance, fault-finding and repairs across cranes, gates, mechanical systems and general facilities, helping to keep the port operational around the clock.This is a varied role suited to someone with a strong mechanical engineering background and some electrical ability, or an electrical technician with sound mechanical experience. You will be working as part of a shift-based engineering team in a fast-paced industrial environment where safety, reliability and quick response times are essential.Your new role \n\n • Carry out planned preventative maintenance, inspections and servicing on port equipment, including cranes, gates, barriers and associated mechanical and electrical systems.\n, • Respond promptly to breakdowns, faults and operational issues, diagnosing problems and carrying out effective repairs to minimise disruption to port activities.\n, • Support the maintenance and repair of site facilities, including lighting, doors, water systems, small plant, fixtures and general building services.\n, • Assist with the safe operation, preparation and availability of port infrastructure and equipment to support vessel, cargo and site operations.\n, • Undertake mechanical repairs, adjustments and replacement of components such as gearboxes, bearings, motors, hydraulics, pumps, valves and drive systems.\n, • Carry out basic electrical fault-finding and repairs within competency, escalating specialist electrical issues where required.\n, • Complete routine checks, maintenance records, permits and job sheets accurately and in line with company procedures.\n, • Work safely at all times, following health, safety and environmental procedures, risk assessments, method statements and permit-to-work systems.\n\n What you'll need to succeed \n\n • NVQ Level 3, City & Guilds, apprenticeship or equivalent qualification in Mechanical Engineering, Engineering Maintenance or a closely related discipline.\n, • Strong mechanical maintenance and repair skills, ideally gained in a port, heavy industrial, manufacturing, marine, logistics, materials handling or similar environment.\n, • Some electrical ability, including basic fault-finding, understanding of motors, sensors, controls or low-voltage systems.\n, • Alternatively, an electrical qualification or background with proven mechanical maintenance experience will be considered.\n, • Experience working on heavy plant, cranes, lifting equipment, gates, barriers, hydraulics, drives, pumps, motors or similar industrial equipment would be highly advantageous.\n, • Good fault-finding skills with the ability to work logically under pressure in a live operational environment.\n\n What you'll get in return A competitive salary starting at £42+ plus shift allowance, regular overtime, enhanced pension scheme, holiday increasing with service, sick pay scheme. Dedicated training and development plan for long-term career development.What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. \n Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Your new companyWe have a great opportunity for a shift technician working at a busy port. This is a hands-on technical role responsible for keeping port equipment, cruise-terminal assets, and cargo-handling systems running safely and reliably across rotating shifts starting at 04.30 early and 13.30 late shift, 2 and 3 days over a 21-day rotating period.Your new roleYou will participate in pre-shift inspections of cruise-terminal and operational assets such as fenders, passenger boarding bridges, and gangways. Manage berth preparation for cruise ship arrivals, including positioning and checking boarding bridges and gangways. Reactive maintenance across the port-responding to breakdowns, equipment failures, and urgent repairs to keep operations running smoothly, offer support for vessel arrival and departure, including installing boarding bridges, crew gangways, and water supply connections. Maintenance of mobile plant and container-handling equipment (for ports focused on cargo operations), including troubleshooting motors, variable-speed controllers, and mechanical systems. Working to strict safety systems, especially when dealing with heavy machinery, heights, and moving equipment. Some facilities' maintenance including lighting, water systems and public services across the port area.What you'll need to succeed \n\n • NVQ Level 3 or ONC in a relevant engineering discipline.\n, • Ability to work at heights and in industrial environments.\n, • Full UK driving licence.\n, • Experience with fault-finding, reactive repairs, and modern maintenance strategies (e.g., RCM, CBM, TPM) for more engineering-heavy roles.\n\n What you'll get in returnA salary of £42500, plus regular enhanced overtime, enhanced pension following probationary period, sick pay scheme, 32 days holiday increasing with service.What you need to do nowIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. \n Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Maintenance engineerA fantastic opportunity for a Maintenance Engineer has arisen to work for an international organization based in the Southampton area.Salary - £42,000 + PackageLocation, commutable from SouthamptonSkills required for the job of a Maintenance EngineerMaintenance and repairs on production machineryCarry out PPMsMechanical, hydraulics, pneumatics, bearings, pumps, chains, and valves.Electrical engineering, single, 3 phase, motors and inverters.Testing and fault findingEngineering backgrounds considered Marine / Navy / Army / IndustrialCompany benefits£42,000 basic salary + PackageTraining, internal, and external coursesExcellent career progression opportunities into management and different areas of the businessCommutable from: SouthamptonOther job titles multi-skilled maintenance engineer, Shift engineer, mechanical maintenance engineer, maintenance technician, Marine Engineer, REME, Navy EngineerTPBN1_UKTJ

Your Company: NET Recruit are delighted to be partnering with a leading engineering and equipment solutions organisation who are seeking a Repair Technician to join their expanding workshop team in a full-time, permanent capacity based in Totton. This organisation is recognised for delivering high-quality engineering and temperature control solutions across a wide range of commercial and industrial sectors. As their hire fleet continues to grow, they are investing in their workshop facilities and are looking for a skilled and motivated technician to help maintain the reliability, performance and longevity of their specialist equipment. The successful candidate will become an integral part of the workshop operation, supporting the repair, refurbishment and maintenance of a diverse fleet of hire equipment. This is an excellent opportunity for a hands-on engineer who enjoys fault finding, problem-solving and working within a collaborative technical environment.Your Roles and Responsibilities:While in this position your duties may include but will not be limited to:\n\n • Diagnosing and troubleshooting faults across a wide range of hire equipment within the workshop\n, • Stripping down, repairing and rebuilding chillers, pumps, motors, heat exchangers and associated mechanical equipment\n, • Replacing faulty components and carrying out repairs to ensure equipment meets operational and quality standards\n, • Supporting the refurbishment programme to maximise the lifespan and reliability of the hire fleet\n, • Conducting inspections and testing to ensure repaired equipment is fully operational before returning to service\n, • Maintaining accurate service records and workshop documentation\n, • Using a variety of hand and power tools safely and effectively to complete repairs\n, • Ensuring workshop housekeeping is maintained to a high standard while adhering to all health and safety procedures\n, • Working closely with colleagues across the workshop and wider engineering teams to support operational priorities\n, • Contributing to continuous improvement initiatives that enhance workshop efficiency and equipment performance\nWhat You Will Need to Apply: The ideal candidate for this role will have previous experience working within a workshop, mechanical engineering, plant maintenance or equipment repair environment, with strong practical skills and a passion for engineering. Applicants should demonstrate experience diagnosing and repairing mechanical equipment, alongside the ability to confidently use a range of hand and power tools. A methodical approach to fault finding and strong problem-solving skills will be essential. A recognised Mechanical Engineering qualification or a completed engineering apprenticeship would be highly advantageous, as would previous experience working with HVAC, refrigeration or industrial equipment. An F-Gas Category 3 qualification would also be beneficial, although this is not essential. Candidates should possess basic IT skills and be comfortable updating maintenance records using computer systems. Excellent communication skills, a collaborative approach and the ability to work both independently and as part of a team will also be important. The successful individual will be reliable, safety-conscious and committed to delivering high-quality workmanship. Applicants must hold a full UK driving licence and demonstrate a proactive attitude towards continuous learning and professional development.What You Will Get in Return: For the successful candidate, a competitive salary will be offered, alongside a comprehensive benefits package. Benefits include a competitive pension scheme, healthcare, life insurance, wellbeing initiatives and access to structured training and ongoing professional development. The successful candidate will also benefit from a supportive working environment, a comprehensive induction programme and genuine opportunities for career progression within a growing engineering business. This role presents an excellent opportunity to join an organisation that values technical expertise, teamwork and continuous improvement. The successful candidate will play a key role in maintaining a specialist fleet of engineering equipment while developing their skills within a modern, fast-paced workshop environment.To discuss this excellent role further, please do not hesitate to reach out to:Alexander Booth - Talent Acquisition SpecialistM: 07525 238567E:

Trainee Air Conditioning EngineerSouthampton£30,000 - £35,900 (OTE £40,000) + Full Training + Progression + Overtime + 25 Days Holiday + Bank Holidays + BenefitsIf you are F-Gas qualified and looking for the opportunity to build a genuine long-term career with full, bespoke training, this is exactly the role for you. This Trainee Air Conditioning Engineer position will give you the support and technical development needed to become confident in the role and perform to the best of your ability.This Trainee Air Conditioning Engieer position is a static workshop based opportunity that offers you the chance to join a company at an exciting stage of expansion, with a brand-new depot opening and significant investment being made into the company's operations.As a Trainee Air Conditioning Engineer, you will work alongside experienced engineers who will train you on the equipment, testing procedures and wider electrical and mechanical skills required to develop your career.Your Role As a Trainee Air Conditioning Engineer Will Include: \n\n • Receiving full training on temperature-control equipment, testing procedures and technical processes\n, • Functionally testing equipment before it leaves the depot and completing relevant documentation\n, • Inspecting equipment carefully to identify faults, damage or anything that could cause problems once dispatched\n, • Gradually taking greater responsibility for the test area as your technical knowledge and confidence develop\n\n As A Trainee Air Conditioning Engineer You Will Need: \n\n • A completed F-Gas qualification\n, • Good attention to detail and the ability to work reliably in a busy environment\n, • A long-term mindset with an interest in progressing technically and eventually moving into management\n\n This vacancy is being advertised by Future Engineering Recruitment. The services of Future Engineering Recruitment are that of an Employment Agency.Please visit our website at futureengineer.co.uk to view other positions we are currently handling.Future Engineering Recruitment can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.Keywords: Trainee, Junior, Training, Refrigeration, F-Gas, Chillers, Air con, AC, Southampton, HVAC, Cooling, Testing, Fault-Finding, Electrical, Mechanical, Maintenance, Hire, Workshop, Engineering, Technician, Trainee, Development, Commissioning, Servicing, Diagnostics

Your Company:NET Recruit are delighted to be partnering with a globally recognised engineering and climate solutions organisation who are seeking a Service Technician to join their team in a full-time, permanent capacity. This is a field-based position covering Hampshire region, providing an excellent opportunity to join a market-leading business renowned for its commitment to innovation, technical excellence and customer service.This organisation has established a strong reputation for delivering industry-leading HVAC and climate control solutions across a broad range of commercial and industrial sectors. With continued investment in technology, people and customer experience, they are looking to appoint a skilled Service Technician to support their growing customer base while maintaining the highest standards of service delivery.The successful candidate will become part of a highly experienced engineering team, providing technical expertise across planned maintenance, reactive service work and commissioning activities while building lasting relationships with customers throughout the region.Your Roles and Responsibilities:While in this position your duties may include but will not be limited to:\n\n • Carrying out planned preventative maintenance (PPM) on a range of HVAC and climate control equipment across customer sites\n, • Diagnosing and repairing mechanical and electrical faults efficiently, ensuring equipment is returned to full operational performance\n, • Attending customer breakdowns, warranty visits, commissioning projects and equipment hire installations as required\n, • Building and maintaining strong customer relationships by providing a professional, knowledgeable and customer-focused service\n, • Working closely with service desk, operations and sales teams to ensure excellent communication and a seamless customer experience\n, • Utilising diagnostic software, engineering drawings and technical documentation to identify faults and carry out repairs\n, • Completing service reports, maintenance records and work order documentation accurately and within agreed timescales\n, • Communicating effectively with supervisors, service managers and fellow engineers to provide updates and support continuous improvement initiatives\n, • Ensuring all work is completed in accordance with company health and safety procedures and engineering standards\n, • Participating in a planned standby and call-out rota, including evenings, weekends and bank holidays where required\nWhat You Will Need to Apply:The ideal candidate for this role will have previous experience working as a Service Technician, Field Service Engineer or within a similar customer-facing engineering position, ideally supporting HVAC, refrigeration or climate control equipment.Applicants should possess strong fault-finding and diagnostic skills across both mechanical and electrical systems, alongside the ability to work independently and manage their own workload effectively while delivering exceptional customer service.Candidates should hold the appropriate industry qualifications, including a valid F-Gas certification, and demonstrate confidence using diagnostic software, engineering schematics and a range of hand and power tools. Previous experience within manufacturing, industrial or commercial environments would be advantageous.Excellent communication and interpersonal skills will be essential, with the ability to build trusted relationships with customers while collaborating effectively with colleagues across service, sales and operations functions.The successful individual will be proactive, self-motivated and solutions-focused, with a strong commitment to delivering high-quality workmanship and outstanding customer experiences. Applicants must hold a full UK driving licence and be willing to participate in a planned standby and call-out rota.What You Will Get in Return:For the successful candidate, a highly competitive salary will be offered, dependent upon experience, alongside a comprehensive benefits package and a fully expensed company vehicle.This role presents an excellent opportunity to join a globally recognised organisation that continues to invest in cutting-edge technologies, employee development and customer excellence. The successful candidate will benefit from ongoing technical training, exposure to market-leading equipment and genuine long-term career progression opportunities within a collaborative and supportive engineering environment.Joining an organisation committed to innovation and operational excellence, you will play a key role in delivering critical engineering services while developing your expertise within a business that values its people and supports continuous professional growth.To enquire further about this exciting position, please reach out to:Christina Smith – Senior Talent Acquisition SpecialistM: E:

Workshop Technician - 3 month contract - £16.00 - £18.00 per hour \n Step into a hands-on role where your practical skills and eye for detail are genuinely valued. This is a 3-month contract position with strong potential to extend, offering the chance to join a well-established workshop team in Southampton and contribute directly to high-quality production work. \n About the Role: \n You will be working in a busy workshop environment, assembling, fitting and finishing components to precise specifications using a range of hand and power tools. Drawing on your carpentry, kitchen fitting or similar background, you’ll interpret engineering drawings and deliver accurate, consistent work to tight tolerances. Your contribution will support on-time delivery of customer orders and help maintain high standards of quality and safety across the workshop. \n Key Responsibilities: \n\n • Assemble, fit and finish components using appropriate hand and power tools to defined standards.\n, • Interpret and work from engineering drawings, ensuring correct dimensions, orientation and fit.\n, • Carry out precision measurement and inspection of parts using gauges, calipers and other measuring equipment.\n, • Identify and report any non-conformances or quality issues, supporting corrective actions where required.\n, • Maintain a clean, organised and safe work area in line with health and safety procedures.\n, • Collaborate with colleagues and supervisors to coordinate workflow and meet production targets.\n, • Handle materials, fixtures and jigs carefully to avoid damage and ensure consistent quality.\n, • Support continuous improvement activities by suggesting practical improvements to methods, tooling or processes.\n\n Key Requirements: \n\n • Confident use of a range of hand and power tools in a workshop or site environment, ideally from a wood background\n, • Ability to read and interpret engineering drawings and follow them accurately.\n, • Competence in precision measurement and inspection using standard workshop measuring tools.\n, • Strong attention to detail with a focus on producing accurate, high-quality work.\n, • Good teamwork and communication skills, with the ability to work effectively within a small workshop team.\n, • Demonstrated adherence to health and safety procedures and safe working practices.\n, • Flexibility to adapt to changing priorities and tasks within the workshop.\n\n Desirable Skills: \n\n • Experience working with wood-based components or joinery-style assemblies.\n, • Background in bench fitting, shopfitting, exhibition builds or similar workshop environments.\n, • Familiarity with basic mechanical assembly or fitting of hardware and fixtures.\n, • Experience working to production schedules or within a lean/continuous improvement environment.\n\n Qualifications: \n\n • Recognised apprenticeship or vocational qualification (e.g. NVQ/City & Guilds) in carpentry, joinery, wood machining, shopfitting or a related practical trade discipline (preferred).\n, • Relevant workshop or trade-based training in safe use of hand and power tools (required).\n, • Health and safety training such as manual handling, basic workshop safety or equivalent (preferred).\n\n If you’re a practical, hands-on professional looking for a 3-month contract with the option to extend and a chance to put your trade skills to work in a workshop setting, we’d like to hear from you.

Maintenance engineer A fantastic opportunity for a Maintenance Engineer has arisen to work for an international organization based in the Southampton area. Salary - £42,000 + Package Location, commutable from – Southampton Skills required for the job of a Maintenance Engineer Maintenance and repairs on production machinery Carry out PPMs Mechanical, hydraulics, pneumatics, bearings, pumps, chains, and valves. Electrical engineering, single, 3 phase, motors and inverters. Testing and fault finding Engineering backgrounds considered – Marine / Navy / Army / Industrial Company benefits – £42,000 basic salary + Package Training, internal, and external courses * Excellent career progression opportunities into management and different areas of the business Commutable from: Southampton Other job titles – multi-skilled maintenance engineer, Shift engineer, mechanical maintenance engineer, maintenance technician, Marine Engineer, REME, Navy Engineer...

Position: Senior FFE Service Technician Job ID: (phone number removed) Location: Southampton / Nationwide & International Travel Rate/Salary: £36,500 – £39,000 Basic + Overtime & Allowances (OTE up to £55,000 – £60,000) Benefits: Company Vehicle, Overtime, Travel Expenses, Training & Certification Support, Pension Scheme Type: Permanent, Full-Time HSB Technical Ltd is a specialist recruiter within the Fire & Security, Power & Propulsion & Shipbuilding Sectors – We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas. The below job description will outline this position of: Senior FFE Service Technician. Typically, this person will be an experienced marine fire-fighting and fire suppression technician with a strong background in the inspection, testing, servicing, maintenance, commissioning and repair of marine fire-fighting equipment and fixed fire suppression systems. The successful candidate will be required to work onboard commercial vessels, offshore installations, marine facilities and shipyards, ensuring all work is completed to relevant manufacturer, SOLAS, IMO and classification society requirements. Duties and responsibilities of the Senior FFE Service Technician will be: • Service, inspect, test, commission and repair marine fixed fire suppression systems. • Work on CO₂, FM-200, Novec 1230, water mist, foam, wet and dry chemical and galley suppression systems. • Carry out annual, intermediate and periodic inspections in accordance with SOLAS, IMO, classification society and manufacturer requirements. • Conduct cylinder weighing, pressure testing, hydrostatic testing arrangements and system integrity checks. • Diagnose faults and undertake corrective maintenance and repair activities. • Complete commissioning activities for newly installed fire suppression systems. • Service and inspect portable fire extinguishers, fire hoses, nozzles, breathing apparatus, EEBDs and gas detection equipment. • Inspect and maintain relevant life-saving appliances including lifejackets and immersion suits. • Complete accurate service reports, inspection records, certificates and deficiency reports. • Ensure all work complies with SOLAS, IMO Codes and Circulars, Flag State requirements and Classification Society Rules. • Assist with internal and external audits and support continuous improvement initiatives. • Maintain calibration records, equipment traceability and accurate service documentation. • Carry out risk assessments and dynamic risk assessments prior to commencing work. • Comply with all company Health, Safety and Environmental procedures, including ISO 45001 requirements. Qualifications and requirements for the Senior FFE Service Technician: • Proven experience servicing marine fire suppression systems. • Strong knowledge of SOLAS and marine safety regulations. • Good understanding of fixed gaseous fire suppression systems. • Ability to read and interpret technical drawings, manuals and system documentation. • Strong fault-finding and diagnostic skills. • Excellent report-writing and documentation skills. • Full UK Driving Licence. • Ability and willingness to travel and work onboard vessels, offshore facilities and within shipyards. • Engineering, Mechanical, Electrical, Marine Engineering or Fire Safety qualification. • Fire Suppression System Service Certification or equivalent industry experience. • Previous marine or offshore experience is desirable. • IFEDA qualification would be advantageous. • Relevant marine classification approvals would be advantageous. • IOSH Working Safely or equivalent would be beneficial. • First Aid at Work qualification would be beneficial. Working Hours & Package: • Permanent, full-time position. • Basic salary of £36,500 – £39,000 depending on experience. • Potential earnings of approximately £55,000 – £60,000 through overtime and allowances. • Company vehicle provided. • Overtime opportunities available. • Travel expenses covered. • Training and certification support. • Pension scheme. • Opportunity to work across commercial vessels, offshore facilities, marine facilities and shipyards. • International and UK travel may be required, with flexibility to work away from home when necessary. • Strong focus on continued professional development, quality and safety. This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role

If you are an experienced Electrical Technician looking for a change, we may have just the opportunity you are seeking. The role is a unique blend of electrical maintenance and problem solving, marine (waterside) preparation and FM housekeeping. The role is primarily electrical but some mechanical knowledge / training would highly beneficial. Skills and Experience: Mixed electrical and mechanical role, with a preference for electrical experience. Valid UK driving license. Ability to work at heights. NVQ Level 3 or Apprenticeship in a relevant engineering discipline. 17th or 18th Edition certification not necessary but would be desirable. Shift Pattern The role runs on a 21 day rotating shift pattern on earlies and lates (including weekends). Early shift starts at 4:30am and ends at 1:30pm, late shift starts at 1:15pm and finishes at 10:15pm. In addition to a competitive salary, the role also attracts an industry leading benefits package, including a contributory pension from day one (starting at 3% employee contribution and 5% company match), private healthcare, access to an employee assistance program, and a wide range of discounts and cashback with high street and online retailers. To apply, or for more detail, please send your CV to Steve Johnstone at Morson Edge at or call (Apply online only)

Technician - Trains Location: Southampton Contract: 12 months, potential for extension Shifts: Nights, 5 on and 5 off Start Date: ASAP Training/shadowing period will be days. Pay Rates: Umbrella: £30.42 per hour (the rate includes 130% night shift uplift) PAYE: £23.17 per hour (the rate includes 130% night shift uplift)Role Overview We are looking for skilled Technicians to support a major Rolling Stock project, working on a variety of rail fleets within a modern, well-equipped depot. You'll be responsible for overhaul, repair, and modification activities on wheelsets, bogies, and associated components, working to all required safety and quality standards. Key Responsibilities Conduct initial inspections of wheelsets and bogies, recording all findings accurately. Safely remove axle bearings, wheel pans, and other components without causing damage. Carry out paint removal, surface defect removal, and general component preparation. Perform oil draining/filling on wheelset gearboxes, couplings, and related parts. Remove and disassemble wheelsets and frames in line with engineering procedures. Repair and reassemble components following technical guidelines. Assist the wider team with bogie and wheelset overhauls, supporting collaborative working and skill development. Identify and collect required materials and spares from stores. Support general depot and rolling stock cleaning when required.Principal Accountabilities Deliver high-quality mechanical repairs, modifications, and overhauls as part of the Engineering Team. Work safely and efficiently within a structured maintenance environment. Ensure all work is completed to the required technical and safety standards.Knowledge & Experience Required Background in mechanical or electrical engineering or a similar process-based environment. Basic fault-finding skills. Ability to accurately record work completed and follow all procedures. Strong understanding of safe use and care of tools, equipment, and PPE. Knowledge of Health & Safety requirements, including manual handling, COSHH, and biohazards. Computer literacy and the ability to interpret technical documents. Capable of producing detailed technical reports when required.All PPE provided by the client and Health and Safety explained before and on site. Rullion supports applications from a diverse talent pool. We welcome the opportunity to discuss flexibility requirements. If you require any reasonable adjustments to be made to enable you to participate in the recruitment process, please contact us on (phone number removed) RBoniface Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands, to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base; from small start-ups to large household names. INDTR-PW Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

Production Engineer Southampton £42 - 47k DOE Looking for an engineering role that's a little different from the norm? We're recruiting for an innovative, fast-growing British manufacturer with a fantastic brand, ambitious growth plans and a genuinely energetic culture. This is a business that invests in new ideas, its manufacturing capability and its people - and they're looking for a hands-on Production Engineer who wants to make a real impact. You'll be joining at an exciting stage of growth, with plenty of opportunity to improve machinery, solve problems, introduce better ways of working and help shape how the production operation develops. Why join this great business as Production Engineer? 33 days' holiday including bank holidays, increasing with service Competitive salary and pension contributions Healthcare benefits Life assurance Employee Assistance Programme Excellent staff discounts Long-service rewards Cycle to Work scheme Regular company social events A fun, energetic working environment with a strong team culture The opportunity to have a genuine influence on production and engineering improvementsThis could be a particularly good move for a forward-thinking production engineering professional who enjoys being hands-on but wants something more interesting than simply keeping the same machines running day after day. The Role of Production Engineer You'll be a key technical presence within production, taking responsibility for the setting, changeover, operation and optimisation of automated and semi-automated production machinery. It's a varied role combining engineering, production and continuous improvement. You'll be: Setting and changing over production and packaging machinery Troubleshooting mechanical, pneumatic and basic electrical/control faults Responding to breakdowns and reducing downtime Carrying out preventative maintenance, inspections and minor repairs Adjusting equipment to improve output, quality and efficiency Identifying recurring faults and getting to the root cause Supporting machine trials, new equipment and process improvements Improving changeover times, reliability, waste and overall equipment performance Providing technical support and coaching to Machine Setters and Production Operators Helping maintain high standards of safety, quality and housekeeping What Are Our Client Looking For As Production Engineer? We're interested in people from backgrounds such as Production Engineering, Machine Setting, Engineering Setting, Production Technician or Manufacturing Engineering. You'll need strong mechanical aptitude and practical experience of setting, operating and fault-finding automated or semi-automated machinery. Experience with filling, capping, labelling, coding, packaging or conveyor equipment would be particularly relevant. Exposure to pneumatics, electrical systems, PLC-controlled machinery, preventative maintenance, 5S, SMED, RCA or OEE would also be beneficial, but you don't necessarily need to tick every box. Above all, we're looking for someone who is curious, proactive and solutions-focused - someone who enjoys figuring out why something isn't working, fixing it and then finding a way to make it work better next time. If you're looking for a hands-on engineering role within an ambitious and slightly different manufacturing environment, this is well worth a conversation. Get in touch - let's chat (phone number removed) TJENG

Aesthetics Technician Location: Southampton Duration of Contract: 6 Months Pay Rate: £24.23 per hour Umbrella / £18.88 per hour PAYE Purpose of Role To undertake all aspects of the internal and external aesthetics maintenance, ensuring that all work carried out meets customer requirements to the specified standard. To carry out train presentation exams. Principal Accountabilities Ÿ Undertake train presentation examinations in accordance with the Train Presentation Exam regime Ÿ Carry out internal and external repairs and maintenance of fixtures & fittings on the train in accordance with the standards set out by Siemens Mobility Ÿ Assist other team members with the development of basic technical skills Ÿ Undertake any other duties as and when required Knowledge & Experience Essential Good knowledge in the use of hand tools Knowledge of Rolling stock Aesthetics maintenance procedures Experienced in use of Microsoft applications Ability to complete all records of actions and operations accurately and to procedures Understands and cares for tools, equipment and PPE as appropriate Knowledge of Health & Safety including bio-hazards, manual handling and Control of Substances Hazardous to Health (COSHH) Ability to understand and interpret relevant technical publications Safety critically assessed Preferred Relevant experience in a mechanical/electrical engineering environment carpet fitting experience would be an advantage Experience in Paint application and mixing but not essential Experienced in vinyl applications and filming but not essential Knowledge of Depot Maintenance systems Health, Safety & Environmental Responsibilities Ÿ Accept a personal responsibility to take reasonable care for the health and safety of themselves and of other persons who may be affected by their acts and omissions Ÿ Take reasonable care to avoid acts or omissions that could have an environmental impact Ÿ Ensure compliance with the BMS procedures relative to their position Ÿ Follow emergency procedures Ÿ Wear approved protective clothing and using safety equipment when required by health and safety regulations Ÿ Use all equipment provided safely and notifying local management of any observed deficiencies or defects as soon as they become apparent Ÿ Inform management of any changes in materials, plant or processes and of any new materials, plant or processes which become apparent in the course of work that may impact on safety or the environment Ÿ Inform management of any potential improvements that could improve Siemens environmental performance Ÿ Immediately inform management of any observed hazards, injuries or dangerous occurrences, which become apparent during work Ÿ Stop work when instructed to do so and only resume or commence work when instructed it is safe to do so Ÿ Report all safety and environmental incidents and accidents Ÿ Cooperate with the employer to ensure their statutory duties are fulfilled All PPE provided by the client and Health and Safety explained before and on site. Rullion supports applications from a diverse talent pool. We welcome the opportunity to discuss flexibility requirements. If you require any reasonable adjustments to be made to enable you to participate in the recruitment process, please contact us on (phone number removed) RBoniface Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands, to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base; from small start-ups to large household names. INDTR-PW Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

Your new company We have a great opportunity for a shift technician working at a busy port. This is a hands‑on technical role responsible for keeping port equipment, cruise‑terminal assets, and cargo‑handling systems running safely and reliably across rotating shifts starting at 04.30 early and 13.30 late shift, 2 and 3 days over a 21-day rotating period. Your new role You will participate in pre‑shift inspections of cruise‑terminal and operational assets such as fenders, passenger boarding bridges, and gangways. Manage berth preparation for cruise ship arrivals, including positioning and checking boarding bridges and gangways. Reactive maintenance across the port-responding to breakdowns, equipment failures, and urgent repairs to keep operations running smoothly, offer support for vessel arrival and departure, including installing boarding bridges, crew gangways, and water supply connections. Maintenance of mobile plant and container‑handling equipment (for ports focused on cargo operations), including troubleshooting motors, variable‑speed controllers, and mechanical systems. Working to strict safety systems, especially when dealing with heavy machinery, heights, and moving equipment. Some facilities' maintenance including lighting, water systems and public services across the port area. What you'll need to succeed NVQ Level 3 or ONC in a relevant engineering discipline. Ability to work at heights and in industrial environments. Full UK driving licence. Experience with fault‑finding, reactive repairs, and modern maintenance strategies (e.g., RCM, CBM, TPM) for more engineering‑heavy roles.What you'll get in return A salary of £42500, plus regular enhanced overtime, enhanced pension following probationary period, sick pay scheme, 32 days holiday increasing with service. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Field Service Engineer / Technician – UK We are currently recruiting for a Field Service Engineer / Technician to join an established and highly regarded marine technology business specialising in advanced systems for the commercial, defence and luxury yacht sectors. This is a hands-on role suited to an experienced engineer who enjoys solving technical problems, working directly with customers and travelling to vessels both in the UK and internationally. The Role Working as part of a specialist service team, you will be responsible for travelling to vessels to install, commission, service and repair complex marine systems. When not travelling, you will provide technical support from the company's UK office. The role will involve a combination of mechanical, electrical, hydraulic and control system troubleshooting, requiring a practical and analytical approach to fault finding. Key Responsibilities Provide professional on-site installation, commissioning, servicing and repair support Diagnose and troubleshoot mechanical, electrical, hydraulic and control system issues Interpret technical drawings, schematics and service documentation Provide technical support to customers and colleagues when office-based Complete service reports, timesheets and associated documentation accurately Maintain a high standard of customer service and professionalism Work independently while managing deadlines and priorities Travel to customer vessels across the UK and internationally as required About You We are looking for someone with a strong practical engineering background and experience working with machinery or complex technical systems. Ideally, you will have: At least 2 years' experience assembling, servicing, commissioning or troubleshooting machinery or technical systems Good working knowledge of mechanical, electrical and hydraulic systems The ability to read and understand technical drawings, schematics and technical manuals Strong diagnostic and problem-solving skills A hands-on, practical approach to engineering The ability to work independently and manage your own workload Good IT skills and the ability to complete service and parts documentation Excellent communication and customer-facing skills Full willingness and ability to undertake UK and international travel Previous marine engineering experience is highly desirable An engineering qualification in electrical engineering, electronics or a related discipline would be advantageous, but relevant hands-on experience will also be considered. The Person You will be professional, reliable and organised, with the confidence to represent the business directly with customers and vessel crews. You should be comfortable working under pressure, able to think logically when diagnosing faults and committed to delivering a high-quality service. This is an excellent opportunity for an engineer looking to develop their career within a specialist and technically advanced marine environment, with exposure to a wide range of vessels, systems and international customers. Location: Southampton / UK-based Travel: UK and weekly international travel required Marine Resources Recruitment Ltd acts as an employment agency for permanent and fixed term contract recruitment and as a recruitment business for the supply of contract workers. Please note that by applying for this job you accept our Terms of Use and Privacy Policy which can be found on our website

Your new company We are looking for a practical, hands-on Engineering Technician to join a busy port operation, supporting the safe, reliable and efficient running of key operational equipment and site facilities. The role will involve planned and reactive maintenance, fault-finding and repairs across cranes, gates, mechanical systems and general facilities, helping to keep the port operational around the clock.This is a varied role suited to someone with a strong mechanical engineering background and some electrical ability, or an electrical technician with sound mechanical experience. You will be working as part of a shift-based engineering team in a fast-paced industrial environment where safety, reliability and quick response times are essential. Your new role Carry out planned preventative maintenance, inspections and servicing on port equipment, including cranes, gates, barriers and associated mechanical and electrical systems. Respond promptly to breakdowns, faults and operational issues, diagnosing problems and carrying out effective repairs to minimise disruption to port activities. Support the maintenance and repair of site facilities, including lighting, doors, water systems, small plant, fixtures and general building services. Assist with the safe operation, preparation and availability of port infrastructure and equipment to support vessel, cargo and site operations. Undertake mechanical repairs, adjustments and replacement of components such as gearboxes, bearings, motors, hydraulics, pumps, valves and drive systems. Carry out basic electrical fault-finding and repairs within competency, escalating specialist electrical issues where required. Complete routine checks, maintenance records, permits and job sheets accurately and in line with company procedures. Work safely at all times, following health, safety and environmental procedures, risk assessments, method statements and permit-to-work systems.What you'll need to succeed NVQ Level 3, City & Guilds, apprenticeship or equivalent qualification in Mechanical Engineering, Engineering Maintenance or a closely related discipline. Strong mechanical maintenance and repair skills, ideally gained in a port, heavy industrial, manufacturing, marine, logistics, materials handling or similar environment. Some electrical ability, including basic fault-finding, understanding of motors, sensors, controls or low-voltage systems. Alternatively, an electrical qualification or background with proven mechanical maintenance experience will be considered. Experience working on heavy plant, cranes, lifting equipment, gates, barriers, hydraulics, drives, pumps, motors or similar industrial equipment would be highly advantageous. Good fault-finding skills with the ability to work logically under pressure in a live operational environment.What you'll get in return A competitive salary starting at £42+ plus shift allowance, regular overtime, enhanced pension scheme, holiday increasing with service, sick pay scheme. Dedicated training and development plan for long-term career development. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)