Instrumentation jobs in DerbyCreate job alerts

Company Description Today, Assystem is among the top three independent nuclear engineering firms worldwide. With over 60 years of experience in highly regulated sectors, the group supports public and industrial stakeholders in the execution of complex and strategic infrastructure projects, subject to high safety and security requirements. Assystem mobilizes 8,000 experts in 13 countries and intervenes across the entire project lifecycle, in engineering, project management and digital solutions.Job Descriptionð Location: DerbyðContract role – Inside IR35Your future team:You will be joining a dynamic and collaborative commissioning team on-site at our Client in DerbyThis is an exciting opportunity for a contractor looking to contribute to a critical project and work within an embedded team. This role will be based in Derby. There is a high possibility that it will increase to a shift pattern later down the line as it moves into the next phase. Your Missions:ð Author and manage commissioning test procedures and prepare safe systems of workð Maintain accurate records of test resultsð§ Conduct commissioning tests and analyse resultsð️ Communicate effectively and manage processesð ️ Carry out Commissioning duties on systems such as; Nuclear, conventional and environmental safety systems, control systems, process monitoring and control instrumentation, wastewater tanks, Nuclear qualified cranes.QualificationsYour strengths and prerequisites for success: ð ️Experienced with commissioning electrical, instrumentation, and control systems on a Nuclear Licensed siteð¡️Familiar with Licence Condition 21 site arrangements, Health and Safety standards, permits, and safety case adherenceð§able to perform initial operator duties during commissioning testing phases. (i.e., Non active commissioning).ð Skilled in authoring test procedures and reportsð§ Understanding of design, construction, and handover processesAdditional InformationPlease be aware that many roles at Assystem are subject to both security and export control restrictions.These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation.All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks.We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.NOTICE TO CANDIDATES ON RECRUITMENT FRAUD - We are committed to safeguarding candidates from fraudulent activity associated with our recruitment process. Please note that we will never offer specialist CV writing services, request payment or ask for sensitive personal information during the recruitment process.We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.SummaryType: Full-timeFunction: EngineeringExperience level: Mid-Senior LevelIndustry: Management Consulting

Company DescriptionToday, Assystem is among the top three independent nuclear engineering firms worldwide. With over 60 years of experience in highly regulated sectors, the group supports public and industrial stakeholders in the execution of complex and strategic infrastructure projects, subject to high safety and security requirements. Assystem mobilizes 8,000 experts in 13 countries and intervenes across the entire project lifecycle, in engineering, project management and digital solutions.Job Descriptionð Join the Fusion and Modular Nuclear Business Unit! ðReporting to the CAD Manager, the mechanical CAD engineer is responsible for the delivery of component models and definitions, system P&IDs, integrated layouts, and assemblies for the Small Modular Reactor (SMR). The role will involve developing an understanding of the layout and components within the SMR, collaborating with engineering designers, and generating CAD models and definitions to a high standard.Your Mission:Integrated Layout Design: Develop layout solutions from concept to construction, based on design engineer specifications.CAD Modeling: Create component CAD models and definitions adhering to standards.Diagram Production: Generate 2D process, instrumentation, and ventilation system diagrams.Data Management: Assist in product configuration and data management processes.Quality Assurance: Maintain quality by conducting peer reviews of models and component definitions.CAD Environment Management: Set up and maintain CAD tools, templates, standards, QA processes, and training materials.Team Support: Provide CAD expertise, training, and mentorship to the CAD/BIM team and junior staff members.Why Join the Community of Switchers?ð Over 55 years in nuclear engineering.ð Ranked among the top 3 largest nuclear engineering companies.ð¼ Attractive social benefits, including an engaging Employee Committee and holiday bonuses.ð Ongoing training with numerous career opportunities.ð 70% of our managers are promoted internally!ð Hybrid work: 1-2 days remote per week.QualificationsExperienced Mechanical CAD Engineer or similar role, ready to drive innovation and excellence.Collaborative team player with a knack for transforming concepts into reality through engineering teamwork. Proficient in 2D CAD systems like AutoCAD for creating precise and detailed drawings. Skilled in 3D CAD/BIM systems (Revit, Inventor, Solidworks, Solid Edge, Siemens NX, PDMS, AutoCAD Plant 3D, or similar) for crafting dynamic models and drawings. Professionally qualified in an engineering-related field, bringing expertise and technical prowess. SC Clearance or the capability to achieve it, ensuring readiness for high-security projects. Additional InformationDue to the nature of the work, applicants must meet UK security clearance criteria.Ready to make a difference in the nuclear engineering world? Join us and be a part of the future of nuclear and fusion innovation! ðNOTICE TO CANDIDATES ON RECRUITMENT FRAUD - We are committed to safeguarding candidates from fraudulent activity associated with our recruitment process. Please note that we will never offer specialist CV writing services, request payment or ask for sensitive personal information during the recruitment process.We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.SummaryType: Full-timeFunction: EngineeringExperience level: Not ApplicableIndustry: Management Consulting

Company DescriptionToday, Assystem is among the top three independent nuclear engineering firms worldwide. With over 60 years of experience in highly regulated sectors, the group supports public and industrial stakeholders in the execution of complex and strategic infrastructure projects, subject to high safety and security requirements. Assystem mobilizes 8,000 experts in 13 countries and intervenes across the entire project lifecycle, in engineering, project management and digital solutions.Job Descriptionð Join the Fusion and Modular Nuclear Business Unit! ðJoin our team as an Engineering Manager for the Electrical, Control, and Instrumentation (EC&I) department, supporting the design and delivery of cutting-edge SMR nuclear power plants. In this role, you'll coordinate and lead projects across EC&I, overseeing a wide range of systems vital to nuclear safety. Working closely with multidisciplinary teams, you'll apply your expertise in project planning and management to ensure successful, on-time, and on-budget project delivery. With your strong technical background in EC&I and experience in managing complex, safety-critical programmes (ideally within the nuclear or similar industries), you’ll be at the forefront of driving excellence in the power industry.Your mission:Develop Technical Programmes: Create and manage EC&I technical programmes covering the entire product lifecycle.Detailed Task Planning: Plan tasks meticulously, accounting for dependencies from other areas.Ensure Work Integration: Foster seamless collaboration across work areas to deliver integrated solutions.Scope Management: Monitor tasks closely and implement protocols to adjust programme scopes as needed.Resource Alignment: Identify resource gaps and assist the Chief Design Engineer (CDE) in crafting resourcing strategies.Budget Development: Help establish and maintain budgets for EC&I programmes.Financial Oversight: Track work pack budgets, forecast, and monitor actual costs versus projections.Risk Monitoring: Manage programme risks, including both threats and opportunities.Contract Staff Management: Oversee and optimize resource allocation for contract staff.Why Join the Community of Switchers?ð Over 55 years in nuclear engineering.ð Ranked among the top 3 largest nuclear engineering companies.ð¼ Attractive social benefits, including an engaging Employee Committee and holiday bonuses.ð Ongoing training with numerous career opportunities.ð 70% of our managers are promoted internally!ð Hybrid work: 1-2 days remote per week.QualificationsExperience: in EC&I design and management, with expertise in two areas (e.g., Control Systems, Radiometrics, Functional Safety).Industry Knowledge: Familiarity with highly regulated industries, control systems, design phases, configuration management, and life cycle stages.Leadership Skills: Proven abilities in leading teams, managing project complexities, and driving continuous improvement.Qualifications: Degree (or equivalent) in Electrical, Instrumentation, or Control Engineering; advanced degrees are a plus.Additional InformationDue to the nature of the work, applicants must meet UK security clearance criteria.Ready to make a difference in the nuclear engineering world? Join us and be a part of the future of nuclear and fusion innovation! ðNOTICE TO CANDIDATES ON RECRUITMENT FRAUD - We are committed to safeguarding candidates from fraudulent activity associated with our recruitment process. Please note that we will never offer specialist CV writing services, request payment or ask for sensitive personal information during the recruitment process.We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.SummaryType: Full-timeFunction: EngineeringExperience level: Not ApplicableIndustry: Management Consulting

Job Description Control & Monitoring System Software Design Engineer Derby/Solihull/Bristol (Hybrid) Full Time Why join Rolls-Royce? At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture. An exciting opportunity has arisen for a Controls Systems Engineer to join the business as part of the Software Systems Capability function. As a Control System Design Engineer within the Mission Critical and Health Monitoring team, you will work within a capability to develop solutions to deliver and maintain features that enhance the product offering. You will develop software within a framework of systems utilising hand-code and model-based development techniques as appropriate and required. A variety of coding languages and software development knowledge is required, hence a flexible mindset focussed on integration and problem solving is necessary. You will be operating as part of a development team, peer reviewing and status accounting work to deliver periodic releases. This role requires an element of customer facing interaction, so clear communication and presentation skills are necessary to coordinate and develop cross-company interfaces. The Controls Systems Engineer shall specify, design and validate complex sub-systems, including high-level requirements for the software and / or hardware system components, this will include creation of mathematical models and simulations of control and actuation systems. What you will be doing: In this role, you will be responsible for the on-time delivery and quality of the controls sub-system and the artefacts associated with the design, verification and validation of the system. This shall be achieved through decomposition of designs and development of tests, analysis to ensure that the system implementation satisfies the validated requirements. Other accountabilities include: Review and agree high level control and instrumentation systems requirements including their testability.Analyse and translate high level requirements into a validated design for the control and instrumentation system.Capture applicable design constraints (must meet conditions) and quality attributes (may be traded) that apply to the control and instrumentation system.Design and implement the control and instrumentation system to meet the high-level requirements and design constraints/standards. Allocate control and instrumentation system requirements to test vehicles defined in the verification plan.Analyse the control and instrumentation system for functional behaviour, which may include modelling and simulation to demonstrate that the design meets the high-level requirements. Develops and reviews control system tests that will provide evidence to demonstrate that the control system requirements have been satisfied.Analyse verification test results against control and instrumentation system requirements.Provide targeted testing of control and instrumentation system functionality to support problem investigation and problem closures and customer issues.Liaise with other disciplines to understand functional performance capabilities of components of the system to facilitate effective component design.May be required to participate in and support capacity planning and the development of long-term strategic goals for the department, in conjunction with the department managers.May be required to develop, implement, document, and maintain policies, procedures, associated guidelines, tools and training as required.Develop the knowledge required to provide advice to project teams and be able to create, search, and reuse knowledge with some guidance from established practitioners.Produce reports where required to document the work carried out.Design sub-systems to meet the functional requirements and design constraints by analysis and translation of customer requirements into a set of validated functional requirements for the system or sub-systems. Creates and validates complex high-integrity mathematical models of control and actuation systems. Analyses requirements for testability.May be required to performs detailed performance analyses of existing and future controls systems.Ensure robust and optimal (weight, cost, etc) designs and problem solutions through the effective application of appropriate engineering tools and applicable processes.Working with the guidance of Control System Specialists defines the physical and functional architecture of the system.Working with the guidance of Control System Specialists undertakes the detailed specification, definition and integration of the system, ensuring that it will accommodate any identified hazards. Preferred requirements: Working knowledge of domain plant and platform interfaces, component technology and behaviour during normal and abnormal operation, verification vehicles, controls design, system architecture, software and/or hardware architecture, and software and hardware development process constraints.A working appreciation of associated engineering disciplines.Proficient in design and analysis tools. This can include an appreciation of the tools and what can be achieved through them.Professional courage to highlight areas of concern and risk with regard to suitability of a product to meet its requirements in a safe and functionally appropriate way.An ability to interpret test results and provide an informed opinion or conclusion as to the outcome of the analysis. This includes an understanding of measurement uncertainty.A demonstrated ability to manage tasks to completion ensuring that the relevant areas of the business are appropriately informed.An ability to identify and manage risk in collaboration with team members. Highly self-motivated and directed, with keen attention to detail.Strong problem-solving skills, and an ability to understand the level of analysis required.Good time management skills able to prioritize and execute tasks in a high-pressure environment. Dynamically respond to evolving objectives and emerging opportunities while working in coordination with a multidisciplinary, energetic team of engineers and scientists.Good written, oral, and interpersonal communication skills, able to communicate ideas in both technical and user-friendly language.Able to research application issues and products by being outward focussed and able to seek solutions/information from outside of immediate area, including suppliers, universities, customers, related industries.Skilled at working within a team-oriented, collaborative environment or as a sole contributor on identified projects.Keen to develop capability through appropriate training courses and workshops.Where required able to train people to improve the capability of the business within a specific area of the business and deliver training material where required. Benefits will include: Retirement Savings through the Rolls-Royce Retirement Savings TrustGroup Life Assurance provides for a lump sum benefit if you die whilst employed by Rolls-RoyceGroup Income Protection provides an income in the event that you are unable to work due to illness or injuryYour Shares: Matched is a simple way to own Rolls-Royce shares and invest in our future, together. Buy one share, get one free!Digital GP provides a convenient way for you to access GP consultationsEmployee Assistance (EAP) and Live Well programmes Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive. As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Software Systems Posting Date 18 aug. 2026; 00:08 Posting End Date 20 aug. 2026PandoLogic. Keywords: Software Engineer, Location: Derby, ENG - DE23 8YH

Degree (or equivalent) in Instrumentation or Control Engineering.

Degree‑qualified in electrical, electronics, instrumentation, control systems or mechatronics (or equivalent experience).

You will own GC-based analyses, maintain instrumentation, and deliver accurate data in a high-throughput setting compliant with ISO 17025 and MCERTS.

Sapien Engineering is seeking a Technical Lead to drive the development and delivery of high-fidelity test rigs for aerospace subsystems. You will lead from concept to commissioning, define requirements with customers, oversee mechanical, electrical, and instrumentation integration, and review techn

Control and Instrumentation Design (Allen Bradley/Siemens PLC knowledge required). Get notified about new Instrumentation and Control Engineer jobs in.

You will deliver planned, preventative and breakdown maintenance to keep production running, with a focus on PLCs, conveyors, motors and controls, and you will lead electrical and instrumentation work with a CMMS. Staffline in the Derby area is recruiting an Electrical Maintenance Engineer on shifts

You will apply instrumentation, assemble rake and probe hardware, and operate test equipment while adhering to safety policies and maintaining records. Aerodyn Ltd is seeking an Instrumentation / Flight Test Technician to perform sensor application and testing for gas turbine engines and related har

The role involves preventative maintenance of instrumentation, analysers and measurement equipment used in engine testing.

Lead C&I Engineer - Physical IntegrationApplylocations: Derby, UK: Manchester: Derby: Warringtontime type: Full timeposted on: Posted Todaytime left to apply: End Date: August 3, 2026 (20 days left to apply)job requisition id: JR100688Role Title: Lead Control & Instrumentation (C

Control & Instrumentation (C&I) - Design Engineer. This is an exciting opportunity for engineers looking to develop deep technical expertise across the full lifecycle of control and instrumentation systems. Control & Instrumentation (C&I) Engineer.

Fitting instrumentation to test items and acquiring, processing, and presenting data using Siemens Testlab software and hardware. NVH Test Engineer - Competitive Salary + benefits - Leicestershire. We are seeking a skilled and passionate NVH Test Engineer to join our Client's team at their UK Techno

You will transform high‑level safety and operational requirements into robust engineering designs for software and hardware vendors, collaborating with safety specialists and platform suppliers. ALTEN UK is seeking a motivated Control & Instrumentation (C&I) - Design Engineer to join our team in D

The role focuses on commissioning and servicing level and pressure instrumentation, with duties spanning on-site support, remote troubleshooting, and customer training.

Experience in gas turbine instrumentation, including instrumentation application and rake & probe assembly. Instrumentation / Flight Test Technician.

Job Title: Electrical Maintenance Engineer - Shifts Location: Derby area Pay Range: £50-53.5k plus overtime 8 Hour shifts Contract Type: Permanent Industry: Global Manufacturer Our client is a large Global manufacturer with a global footprint. It is an established site with an established engineering. Training, development, and support is provided on a manufacturing site. You will help the site make high-quality manufactured products, the site has been manufacturing for over 60 years. This market leading employer will welcome and encourage your new ideas, and you will be rewarded with the opportunity to learn and grow, achieving your career aspirations. Site investment and expansion continues. Key Responsibilities - Electrical Maintenance Engineer - shifts Your new challenge will be providing effective and efficient planned, preventative and breakdown maintenance to minimise losses to production Ensure the continuous running of the production process by eliminating downtime through a safe and logical approach to fault finding and maintenance of equipment Planned and reactive maintenance to keep downtime to a minimum You'll work with conveyor systems, PLC systems, motors and controls Leading electrical and instrumentation, repair, and working with a CMMS Diagnosis, resolution, and elimination of root causes Implementation of minor equipment modifications in support of increased performance Completion of all scheduled, planned corrective, reactive and improvement maintenance as allocated Contribute to the planning and implementation of allocated annual equipment overhauls Qualifications & Requirements - Electrical Maintenance Engineer - Shifts Apprentice trained or NVQ level 3 in an electrical engineering discipline in maintenance engineering Manufacturing Industry experience, heavy, medium or FMCG environments considered Routine Preventative Maintenance so an understanding of a PPM schedule Finding and fixing faults quickly and effectively A proactive approach to fault finding, a commitment to continuous improvement and personal development What we can offer - Electrical Maintenance Engineer - Shifts Work at a world-class, award-winning site Automated facility Opportunity for overtime Excellent pension Free onsite parking Health cash plan Reward and Recognition schemes Employee Discount Life Assurance For more information on this role, please contact Mike Butler on (phone number removed) or send a copy of your CV to (url removed) Candidates who are currently a multi-skilled engineer, electrical engineer, electrical technician manufacturing engineer, maintenance engineer , electrician , electrical engineer, Fitter electrical fitter, maintenance engineer, shift engineer or maintenance engineer may be suitable for this position. Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process

My Client is recruiting for a Senior Electrical Design Engineer in the Water Sector We are seeking to strengthen our Engineering Design Team with the appointment of a Senior Electrical Design Engineer, based in Derby with hybrid working available. In this role, you will report to your Line Manager and the Regional Discipline Lead - (Electrical and ICA). You will be responsible for delivering high‑quality Electrical, Instrumentation, Control and Automation (EICA) design services that support the safe, efficient and compliant delivery of projects across the water and wastewater sectors. You will play a key role in mitigating technical, commercial and delivery risks, ensuring that design solutions are robust, buildable, cost‑effective and aligned with both client specifications and contractual requirements. You will lead and coordinate design activities, producing detailed design documentation and drawings in accordance with relevant health and safety legislation, CDM regulations, water‑industry standards, and internal engineering governance arrangements. Key responsibilities will include: Produce Outline and Detailed Electrical, Instrumentation, Control and Automation designs that meet client needs and enable safe, efficient construction and commissioning. Produce and check specifications, schedules, drawings and calculations to a high standard. Ensure designs are completed in accordance with CDM Regulations and industry best practice. Promote the use of standard designs and consistent design principles wherever possible. Deliver design outputs on time and within budget, keeping colleagues informed throughout. Work collaboratively with other disciplines to ensure coordinated, integrated design solutions. Prepare clear and helpful monthly project status reports. Build strong working relationships with construction teams and supply chain partners to support buildability and programme efficiency. Provide accurate estimates and technical insight to support proposal development. Ensure that standard practices are utilised wherever possible. Contribute positively to departmental processes and support continuous improvement activities. Maintain accurate design records and documentation throughout the project lifecycle. Support a culture focused on customer satisfaction and constructive communication. Maintain your own professional development and support the growth of junior team members. Promote safe working practices and ensure all designs reflect health, safety and environmental considerations. Work in a way that minimises waste and supports environmental sustainability. Assist in supervising and developing staff. Assist in ensuring a safe working environment for all staff. Essential: Relevant engineering degree preferred, or HND with substantial design and build experience (substantial suitable design experience). Membership of a relevant professional institution chartered or working towards chartership. Significant experience in Electrical and ICA design and delivery, ideally within the water or wastewater sectors. Proven Ability to develop practical, buildable and efficient design solutions that meet client, project and industry standards. Experience producing and checking a full suite of design deliverables, including specifications, schedules, drawings, calculations and operating philosophies. Ensure designs are completed in accordance with CDM regulations, and are safe to construct, commission, operate and maintain. Competence in rationalising designs and developing economical, well‑integrated plant layouts. Experience reviewing, coordinating and providing technical assurance on subcontractor designs. Ability to manage complex technical information, assess design risks, and communicate implications clearly. Have experience of managing members of staff, in designing relevant discipline aspects of a project, preferably within Water and Wastewater project delivery. Strong understanding of CDM regulations and the ability to ensure designs are safe to construct, commission, operate and maintain. Demonstrated commitment to producing designs that follow client specifications, industry guidance and internal governance requirements Ability to embed standard design practices and utilise common design solutions wherever appropriate. Experience working collaboratively as part of a multidisciplinary engineering team. Ability to build strong working relationships with construction teams and supply chain partners to support buildability, quality and programme efficiency. Proven ability to deliver coordinated design outputs across multiple engineering disciplines. Ability to rationalise designs and produce economic plant layouts. Commitment to ongoing professional development; working toward professional registration (IEng/CEng) is advantageous. Clear, confident and convincing communication skills, with the ability to present technical proposals to a range of stakeholders. Strong IT skills, particularly in Microsoft Office, and confidence in using digital design environments; experience with CDE platforms is beneficial. Flexible, analytical mindset with the ability to process and interpret large volumes of technical information. Broader understanding of related engineering disciplines (mechanical, process, ICA, project management). Full UK driving licence and willingness to travel to project sites and office locations as required.Desirable: Relevant Engineering Master's degree. Chartered Engineer (CEng) Status. Understand the principles of water and sewage treatment. Understanding of water and wastewater treatment principles. Five or more years' water‑industry experience. Experience working within a Common Data Environment (CDE) and digital document control

Maintenance Engineer – Instrumentation Derby, UK £50,000 + OT This is an exciting opportunity within a successful manufacturing and test facility involved with the design, manufacture and test of a range of engines. They are looking for a Maintenance Technician / Engineer to carry out preventative maintenance of the test facility and its equipment – Instrumentation, analysers and measurement equipment etc These facilities run 24/7 so the role offers overtime for any works carried out at weekends or over 8 hours a day, 7 on Fridays. Your Role: Maintenance Engineer: As a maintenance technician / engineer you will be involved with supporting preventative maintenance, repair and fixing of all equipment and instrumentation within the test facility This will typically involve: Breakdown support, fault finding and repair on electronics, 3 phase electrical and mechanical instrumentation and systems Routine maintenance and service – implementing planned and preventative maintenance schedules Responsible for total preventative maintenance (TPM) of engine test facility systems and instrumentation from emission benches, gas measurement, thermocouples, analysers to motors, fans, pumps, adiabatic system decommissioning and recommissioning Skills: Maintenance Engineer: Proven experience working as a maintenance technician / engineer / service engineer with strong preventative maintenance experience Knowledge of electronics, electrical with some mechanical engineering, coupled with experience of PCBs, wiring, 3 phase electrical systems, instrumentation through to industrial motors, pumps, fans etc (industrial motors from <1hp up to 20kW) Apprenticeship-served or HNC-level qualification preferred; strong craft/apprentice background ideal Good proven maintenance, fault finding, service, commissioning/decommissioning and repair abilities Ability to work independently, self-driven and manage own workload without close supervision Methodical, diligent and proactive in identifying and preventing issues before they arise Willingness to work occasional weekends (approx. 6 times/year, with overtime pay) Overtime is accrued daily at time and a half after 8 hours (Mon to Thu) and after 7 hours on a Friday. Saturday is time and a half, Sundays and bank holidays are double time. The company is commutable from Derby, Foston, Stafford, Burton upon Trent, Uttoxeter, Castle Donnington, Stoke on Trent, Rocester etc

My Client is recruiting for a Process Commissioning Engineer in the Water Sector This role forms part of our Commissioning team, supporting non‑infrastructure projects across the programme. You'll play a key role in bringing design intent to life - ensuring new and upgraded assets operate safely, efficiently and in full compliance with regulatory and water quality standards. What will your day look like… Developing and implementing commissioning plans, test scripts, sequences and acceptance criteria. Supporting onsite commissioning activities including testing, optimisation, fault finding and performance trials. Applying safe systems of work and commissioning standards in line with Company'business wide framework. Managing sampling, analysis, data interpretation and evidence collation to demonstrate compliance. Contributing to commissioning documentation including RAMS, ITPs, handover packs and regulatory submissions. Participating in design reviews, HAZOPs, commissioning readiness reviews, FATs and site acceptance activities. Working collaboratively with project managers, designers, operations teams and supply chain partners. Experience and Qualifications: Degree or similar (or working towards) in Process, Chemical, Environmental, Mechanical or a related engineering discipline, or equivalent experience. Water Hygiene certification and relevant site safety qualifications are desirable. Strong grounding or experience in process commissioning within the water, wastewater or wider utilities sector. Good understanding of treatment processes, instrumentation, control systems and water quality requirements. Awareness of the full project lifecycle and the role commissioning plays in successful project outcomes. Well organised, safety focused and able to manage multiple commissioning activities effectively. Strong communication skills with the ability to produce clear, accurate technical documentation

Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. Youll be responsible for the delivery of preventative maintenance of electrical systems, controls and instrumentation.

Electrical & Instrumentation Engineer. Electrical & Instrumentation Engineer. What You'll Be Doing as an Electrical & Instrumentation Engineer:.

Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. Youll be responsible for the delivery of preventative maintenance of controls and instrumentation.

As a small business focused on measurement and detection instrumentation we are seeking a skilled and motivated. Gas Detection / Instrumentation Service Engineer. In this role, you will be responsible for the installation, calibration, maintenance, and repair of fixed and portable gas detection and

H Squared Talent Ltd is seeking a senior engineering leader for a global instrumentation business.

Your role will include repairing and calibrating state-of-the-art instrumentation, training customers, and diagnosing technical issues.

A leading provider of analytical instrumentation is seeking a Scientific Marketing Executive to contribute to the promotion of advanced laboratory technologies.

Customer Support Engineer to install, repair, and maintain complex instruments across the UK.The position offers remote working and requires a full UK driving licence.Ideal candidates will have qualifications in Electronics or Chemistry and experience in customer service.Join a dynamic team in a fas

Electrical, Controls & Instrumentation (EC&I). Knowledge of instrumentation, control loops, process control, and fieldbus protocols (HART, Modbus, Profibus, etc. Control & Instrumentation Technician.

Randstad CPE is seeking an Electronics and Instrumentation Technician for a 12‑month contract in Peterborough, onsite. Candidates should have an electrical/electronics apprenticeship or equivalent hands‑on experience and a strong reliability in instrumentation troubleshooting, with exposure to a

Luton Bennett is seeking an Automation and Instrumentation Technician for a new plant in Avonmouth, Bristol. The role involves maintenance of PLCs, SCADA, sensors and related instrumentation at a growing site with overtime opportunities.

Advanced Technical Recruitment is seeking an Engineering & NPD Manager for a permanent, onsite role in Hampshire.The successful candidate will lead a small team across electronics, firmware, software and mechanics to deliver new products from concept to production.You will establish specifications,

ASSYSTEM is seeking a competent CE&I design engineer in the UK to develop and deliver design solutions based on project specifications.The role requires producing designs and supporting calculations, while ensuring project timelines are met.Applicants should have a degree in an engineering disciplin

GeneMind Biosciences is seeking a Field Service Engineer to own end-to-end on-site and remote service delivery for high-precision sequencing instruments.You will install, commission, troubleshoot hardware, and deliver technical training to distributors and customers, ensuring optimal instrument perf

You will work on instrumentation across process systems, including pressure, temperature, level, flow and analytical instruments, with awareness of ATEX and hazardous areas.

Sembcorp UK is seeking a Shift Laboratory Analyst to deliver high-quality analytical services for internal and external customers.Based in Wilton, you will follow validated methods, review results with clients, and help drive efficiency and compliance in a busy laboratory.You will manage tasks in li

We currently have an opportunity for a MEICA (Mechanical, Electrical, Instrumentation, Controls and Automation) Engineer to join our engineering team. Good knowledge of producing Piping & Instrumentation Diagrams (P&IDs), complying with UK water industry standards.

Hyper Recruitment Solutions Ltd is seeking a Technical Service & Support Engineer to join a leading UK/Ireland‑based organisation providing on‑site service and maintenance for analytical instrumentation.

Allscreens Nationwide Ltd in Peterborough is seeking an Electronics and Instrumentation Technician on a 12-month contract, fully onsite. You will perform calibration, maintenance, and breakdown repairs on precision instrumentation and control systems, supporting a small, collaborative team.

Ideal candidates have experience in precision engineering or scientific instrumentation, proficiency with SolidWorks or Creo, and a strong focus on Design for Manufacture and tight tolerances.

ABB UK’s Measurement & Analytics division seeks an Internal Proposals Engineer to support the preparation and management of technical and commercial sales proposals for process instrumentation solutions.

The role focuses on Emerson Delta V expertise, database merges, and DCS/Instrumentation support across design, commissioning and operations stages.

The successful candidate will be working in the Durham University Space Research Centre (SPARC) and the Centre for Advanced Instrumentation (CfAI) in the Department on Physics. CfAI's mission is to design and develop novel instrumentation based on cutting-edge technologies. Major current ground-base

You will work across sites in Ellesmere Port, Chester, Birkenhead, Liverpool, Manchester, and nearby areas, maintaining Electrical and Instrumentation systems and leading maintenance activities.