Good office jobs in RotherhamCreate job alerts

Role: Building Regulations Principal DesignerLocation: Sheffield office, projects across YorkshireSalary: £50,000 £65,000 + excellent benefits packageSector: Independent Property & Construction ConsultancyWe Recruit Group has an exclusive opportunity for a Building Regulations Principal Designer to join a small, independent property and construction consultancy based in Sheffield.Our client is a close-knit construction consultancy that provides professional support to clients across the built environment. With a team of 10 people, the business offers a genuinely supportive environment where you will not feel like just another number. You will work closely with senior colleagues, receive hands-on support and have the opportunity to play an important role in the continued growth of their Building Regulations Principal Designer service.This is an excellent opportunity for an ambitious building control, architectural, or design professional who is looking to develop their career within a business that can offer proper training, direct exposure to clients and a clear route for progression.The successful candidate will support the delivery of the Building Regulations Principal Designer role under the Building Safety Act, working closely with clients, design teams, contractors and wider project stakeholders to ensure building regulations compliance is considered, coordinated and managed throughout the design and construction process.The RoleAs Building Regulations Principal Designer, you will be involved in:Delivering Building Regulations Principal Designer duties across a range of construction projects.Supporting clients in understanding their duties under the Building Safety Act and Building Regulations.Reviewing design information for compliance with relevant Building Regulations requirements.Working closely with architects, designers, consultants, contractors and clients to coordinate building regulations compliance.Attending design team meetings and providing technical advice throughout the design and construction stages.Supporting the development and review of design risk and compliance trackers.Reviewing drawings, specifications and project information to identify potential compliance gaps.Liaising with Building Control, Registered Building Inspectors and other project stakeholders where required.Helping project teams prepare, manage and maintain the golden thread of information.Supporting the preparation of Gateway submissions where applicable.Providing practical advice to ensure compliance is considered early and embedded throughout the project lifecycle.Supporting the continued growth and development of the Building Regulations Principal Designer service.About YouOur client is open-minded on background and is more interested in finding someone with the right attitude, communication style and desire to develop.You may already be working as a Building Regulations Principal Designer, Building Control Surveyor, Approved Inspector, Architect, Architectural Technologist, Design Manager, CDM Principal Designer or construction professional with strong technical knowledge of Building Regulations.Ideally, you will have:A good understanding of Building Regulations and the Building Safety Act.Experience reviewing design information, drawings or technical documentation.A background within Building Control, architecture, design management, technical coordination.Strong communication skills and the confidence to liaise with clients, designers and project teams.A proactive, organised and practical approach to compliance.The ability to identify potential compliance risks and provide clear, sensible advice.Full UK driving licence.Membership of a relevant professional body would be beneficial, although not essential e.g RICS, CABE, RIBA, CIAT etc.Why Apply?This is a great opportunity to join a smaller consultancy where your contribution will genuinely be noticed. You will be joining a close-knit, supportive team with ambitious growth plans and a real focus on developing people.The business can offer:Salary in the region of £50,000 £65,000 depending on experience.Supportive and close-knit working environment.Genuine training and development.Exposure to varied construction projects.Direct support from senior members of the team.Clear progression opportunities as the business grows.Professional development and CPD support.Opportunity to help shape and develop the Building Regulations Principal Designer service.This role would suit someone who wants to move away from a large corporate environment and join a smaller, more personable consultancy where they can have real input, develop their technical knowledge and play a key part in building out a growing service line.Please reach out to Mike at We Recruit Group on 07562 945 690 to discuss the opportunity further.TPBN1_UKTJ

Job TitleHGV Class 2 DriverStart DateImmediateOur CustomerOur long established logistics client based in Sheffield South Yorkshire has an urgent requirement for HGV Class 2 Drivers to join their team on a regular ongoing basis.Job Description.Work involves Class 2 HGV LGV Driving work, of either National Deliveries or more local work. Start time depending on client range from 0600am to 0800am, Monday to Friday, ongoing work, with Temp to Perm opportunities available as well.Licence requirements:HGV Class 2 licence (UK)Up to date CPC for your Class 2Up to date Digi card for your Class 2You Must:Have a positive attitude and a great work ethicBe punctualSmart appearance as you will be representing the company (no Jeans etc.)Keep vehicle clean and to a good standardGood communication skills are essential for this position as you might be needed to be contactable throughout the shiftSalary:Weekdays per hour: £15.00 ph (PAYE) or £17.00 ph (Inc of Holiday Pay via Umbrella Paye)Saturdays - £16.00 ph (PAYE), £17.00 ph (Inc of Holiday Pay via Umbrella paye)Sundays - £17.00 ph (PAYE), £19.00 ph (Inc of Holiday Pay via Umbrella paye)Both Paye and Umbrella available, please see rates aboveLocation:Sheffield South YorkshireContact us:In the first instance;send us your CV or contact our office on 0115 9338626.Other jobs availableTomlin Personnel supply drivers to various companies across the East Midlands and South Yorkshire region so if this job isn't suitable please give us a call and we will do our utmost to find you the right job.TPBN1_UKTJ

HGV Class 1 Driver - Easy Depot to Depot - NIGHT TRUNKINGStart DateStraight AwayOur CustomerOur long established logistics client based Sheffield South Yorkshire has an urgent requirement for HGV Class 1 Drivers to join their team on a regular ongoing basis.They have won a new contract and require Class 1 Drivers, weekly, Monday to Friday, ongoing all year round. Weekend shifts also available if required as well.Job Description.Work involves Class 1 HGV Driving work, box trailors, RDC Trailor swaps, no handballing, timed deliveries, so no messing around on the shifts, clear communcation is requried with the transport team as well.Various start times available ranging from 1600pm onwards.Licence requirements:HGV Class 1 LicenceUp to date CPC for your Class 1Up to date Digi card for your Class 1You Must:Have a positive attitude and a great work ethicBe punctualSmart appearance as you will be representing the company (no Jeans etc.)Keep vehicle clean and to a good standardGood communication skills are essential for this position as you might be needed to be contactable throughout the shiftSalary:Nights per hour: £17.00 ph (PAYE), £20.00 ph (Umbrella)Saturdays per hour: £20.00 ph (PAYE), £22.50 ph (Umbrella)Sundays per hour: £22.00 ph (PAYE), £24.50 ph (Umbrella)Location:Sheffield South YorkshireGet In Touch:In the first instance;send us your CV or call our office on 0115 9338626.Other jobs availableTomlin Personnel supply Class 1 Drivers to various companies across the Midlands and Yorkshire, so if this job isn't suitable please give us a call and we will do our utmost to find you the right jobTPBN1_UKTJ

Role: Building Regulations Principal DesignerLocation: Sheffield office, projects across YorkshireSalary: £50,000 £65,000 + excellent benefits packageSector: Independent Property & Construction ConsultancyWe Recruit Group has an exclusive opportunity for a Building Regulations Principal Designer to join a small, independent property and construction consultancy based in Sheffield.Our client is a close-knit construction consultancy that provides professional support to clients across the built environment. With a team of 10 people, the business offers a genuinely supportive environment where you will not feel like just another number. You will work closely with senior colleagues, receive hands-on support and have the opportunity to play an important role in the continued growth of their Building Regulations Principal Designer service.This is an excellent opportunity for an ambitious building control, architectural, or design professional who is looking to develop their career within a business that can offer proper training, direct exposure to clients and a clear route for progression.The successful candidate will support the delivery of the Building Regulations Principal Designer role under the Building Safety Act, working closely with clients, design teams, contractors and wider project stakeholders to ensure building regulations compliance is considered, coordinated and managed throughout the design and construction process.The RoleAs Building Regulations Principal Designer, you will be involved in:Delivering Building Regulations Principal Designer duties across a range of construction projects.Supporting clients in understanding their duties under the Building Safety Act and Building Regulations.Reviewing design information for compliance with relevant Building Regulations requirements.Working closely with architects, designers, consultants, contractors and clients to coordinate building regulations compliance.Attending design team meetings and providing technical advice throughout the design and construction stages.Supporting the development and review of design risk and compliance trackers.Reviewing drawings, specifications and project information to identify potential compliance gaps.Liaising with Building Control, Registered Building Inspectors and other project stakeholders where required.Helping project teams prepare, manage and maintain the golden thread of information.Supporting the preparation of Gateway submissions where applicable.Providing practical advice to ensure compliance is considered early and embedded throughout the project lifecycle.Supporting the continued growth and development of the Building Regulations Principal Designer service.About YouOur client is open-minded on background and is more interested in finding someone with the right attitude, communication style and desire to develop.You may already be working as a Building Regulations Principal Designer, Building Control Surveyor, Approved Inspector, Architect, Architectural Technologist, Design Manager, CDM Principal Designer or construction professional with strong technical knowledge of Building Regulations.Ideally, you will have:A good understanding of Building Regulations and the Building Safety Act.Experience reviewing design information, drawings or technical documentation.A background within Building Control, architecture, design management, technical coordination.Strong communication skills and the confidence to liaise with clients, designers and project teams.A proactive, organised and practical approach to compliance.The ability to identify potential compliance risks and provide clear, sensible advice.Full UK driving licence.Membership of a relevant professional body would be beneficial, although not essential e.g RICS, CABE, RIBA, CIAT etc.Why Apply?This is a great opportunity to join a smaller consultancy where your contribution will genuinely be noticed. You will be joining a close-knit, supportive team with ambitious growth plans and a real focus on developing people.The business can offer:Salary in the region of £50,000 £65,000 depending on experience.Supportive and close-knit working environment.Genuine training and development.Exposure to varied construction projects.Direct support from senior members of the team.Clear progression opportunities as the business grows.Professional development and CPD support.Opportunity to help shape and develop the Building Regulations Principal Designer service.This role would suit someone who wants to move away from a large corporate environment and join a smaller, more personable consultancy where they can have real input, develop their technical knowledge and play a key part in building out a growing service line.Please reach out to Mike at We Recruit Group on 07562 945 690 to discuss the opportunity further.TPBN1_UKTJ

About ConvatecPioneering trusted medical solutions to improve the lives we touch: Convatec is a global medical products and technologies company, focused on solutions for the management of chronic conditions, with leading positions in Advanced Wound Care, Ostomy Care, Continence Care, and Infusion Care. With more than 10,000 colleagues, we provide our products and services in around 90 countries, united by a promise to be forever caring. Our solutions provide a range of benefits, from infection prevention and protection of at-risk skin, to improved patient outcomes and reduced care costs. Convatec’s revenues in 2024 were over $2 billion. The company is a constituent of the FTSE 100 Index (LSE:CTEC). To learn more please visit http://www.convatecgroup.comAbout the role:Provide process expertise along with key skills relating to validation, process optimization and problem solving. Support and deliver projects from the Project Portfolio and work closely with all teams to ensure that CI is embedded at every level within the organization and that all deliverables are constantly improved. Embrace and drive ConvaTec’s core mission, values and priorities. Managing multiple projects, which will vary depending on the complexity of the project/change.Your key duties and responsibilities:Perform IQ, OQ, PQ validationUpdate and maintain change control systems and associated documentationIdentify and deliver cost savingsAdhere to legal, corporate and site legislation, and proceduresCompliance with GMP requirements and uphold these standardsCompliance with EHS requirements and uphold these standardsDevelop and maintain detailed project plans, clearly identifying and sequencing all activities required for successful and timely project delivery.Seek and deliver CI opportunities across the site Managing complex projects, adhering to timelines and budgets.Skills & Experience:Demonstrated experience in Manufacturing CI support roleUnderstanding of Risk management for Medical Devices.Demonstrated expertise in problem solving centered around CAPA’s and NC’s.Experience working within a lean manufacturing environment.Must have in-depth working knowledge of all processes and equipment within focus factory.Understand the implications and requirements of external regulations, particularly GAMP5, FDA & MHRA, EHS and manufacturing legislation.Demonstrated project and time management skills, including a track record of creating plans and meeting deadlines.Proven ability to balance multiple, competing priorities.Demonstrated interpersonal skills and a good team player, proactive and flexible approach.Qualifications/Education:Degree, or equivalent in an Engineering DisciplineSix Sigma Green Belt, or demonstrates a similar approach to problem solvingPC Skills including SAP, Word, Excel, PowerPoint, MS Project, CADTrained in IQ, OQ, PQ validation principlesStrong Working Knowledge of Problem-solving tools.Kaizen lead trained.Prince 2 Practitioner or a Project Management Professional (PMP) qualification desired.Travel Requirements:Travel may be required with this role (15%) including to other Convatec manufacturing facilities and to supplier facilities as required. This could be domestic or international travel.Working Conditions:Onsite based at Deeside or Rhymney manufacturing site.Special Conditions:Working in an office-based environment, with time spent on the shop-floor and in a clean room environment. Flexibility to support the facility across shifts and weekends as required.Ready to join us?At Convatec, we’re pioneering trusted medical solutions to improve the lives we touch. If you’re ready to make a real impact, apply today and help us bring our Forever Caring promise to life.#LI-CC1#LI-OnsiteBeware of scams online or from individuals claiming to represent ConvatecA formal recruitment process is required for all our opportunities prior to any offer of employment. This will include an interview confirmed by an official Convatec email address.If you receive a suspicious approach over social media, text message, email or phone call about recruitment at Convatec, do not disclose any personal information or pay any fees whatsoever. If you’re unsure, please contact us at careers@Convatec.com.Equal opportunities Convatec provides equal employment opportunities for all current employees and applicants for employment. This policy means that no one will be discriminated against because of race, religion, creed, color, national origin, nationality, citizenship, ancestry, sex, age, marital status, physical or mental disability, affectional or sexual orientation, gender identity, military or veteran status, genetic predisposing characteristics or any other basis prohibited by law.Notice to Agency and Search Firm RepresentativesConvatec is not accepting unsolicited resumes from agencies and/or search firms for this job posting. Resumes submitted to any Convatec employee by a third party agency and/or search firm without a valid written and signed search agreement, will become the sole property of Convatec. No fee will be paid if a candidate is hired for this position as a result of an unsolicited agency or search firm referral. Thank you.Already a Convatec employee?If you are an active employee at Convatec, please do not apply here. Go to the Career Worklet on your Workday home page and View "Convatec Internal Career Site - Find Jobs". Thank you!SummaryLocation: Deeside, Wales; Rhymney, South WalesType: Full time

Company DescriptionAt Turner & Townsend, we’re passionate about making the difference. That means delivering better outcomes for our clients, helping our people to realise their potential, and doing our part to create a prosperous society. Every day, we help our major global clients deliver ambitious and highly technical projects in over 110 offices worldwide.Turner & Townsend within the UK has a wide range of key clients in various sectors, including Health, Local Authorities, Higher Education, Highways, Utilities, Rail, and Defence. Our diverse portfolio of clients provides our team members with unique and rewarding opportunities to gain experience across a broad range of major programmes and projects.Turner & Townsend are a key Tier 1 supplier of project and programme management services to the Ministry of Defence and strategic Defence suppliers in the UK. We play a crucial role in supporting the defence of the United Kingdom, whilst ensuring our clients achieve better outcomesJob DescriptionImportant: Before applying, due to the sensitive nature of these projects, you must be a SOLE UK National who is able to achieve and maintain UK MoD Security Clearance (SC). See Security Clearance Section. Turner & Townsend is one of the leading consultancy providers to the Infrastructure and Defence sectors and we have a thriving UK Estimating team making the difference for a large number of clients both in the UK and Overseas. We are now looking for talented Estimators with proven Defence estimating experience to work with a number of our key Defence sector cliets in a wide variety of exciting projects/programmes. Our team deliver a wide range of estimating outputs for our clients, to support their decision making, including: Estimate / cost model production (from Order of Magnitude through to detailed estimates) Estimating assurance Commercial data & benchmarking As an Estimator within the Estimating team at Turner & Townsend you will be responsible for: Production of accurate and comprehensive estimates for projects in a timely and efficient manner. Control and management of the estimating process at project level; Production of estimates without management or supervision; Able to work as part of a team or as an individual with limited supervision; Supporting development and promotion of estimating good practice within Turner & Townsend; Supporting estimating good practice as a representative of Turner & Townsend within our client organisations Assisting in the achievement of departmental objectives; Staying abreast of developments within own technical area of expertise to be able to give best practice advice in line withQualificationsQualification in Estimating, Quantity Surveying or Cost Engineering Experience of working in the Defence sector Demonstrable and proven experience in: Compilation, assurance and delivery of complex estimates and cost models Working within an integrated Project Controls team Public sector projects Excellent and flexible skills in Microsoft Office Suite (MS Excel, Work, PowerPoint) Strong written and verbal communication skills with experience of working in a client-facing environment Preferred: Membership of a relevant professional body with chartered status and/or educated to degree level Experience in early stage estimating in complex / major Defence Infrastructure programmes Familiarity with industry-standard estimating software packages Additional InformationSecurity ClearanceImportant: Before applying, due to the sensitive nature of these projects, you must be a Sole UK National who is able to achieve and maintain UK MoD Security Clearance (SC).Many of the clients and projects we support are subject to MoD security clearance and Trade Control restrictions. This means that your eligibility for certain roles may be affected by your place of birth, nationality, current or former citizenship, and any residency you hold or have held. Further details are available at United Kingdom Security Vetting: clearance levels - GOV.UK (www.gov.uk).Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change, such as to current processes through networks such as our maternity steering groups.We want our people to succeed both in work and life. To support this we promote a healthy, productive and flexible working environment that respects work-life balance and working parents. Turner & Townsend is an equal opportunity employer. We celebrate diversity and have active networks who are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Our “One Employee Network (OEN)” is a unified umbrella, developed to influence, champion and support Turner & Townsend’s ambition to become a more diverse, equitable and inclusive organization. As well as advocating for employees who identify with specific groups and communities, our networks such as but not limited to DE&I, Unity, Womens Network, Wellbeing, Military, Parents and Carers enhance and share best practice and encourage dialogue across our business.Please find out more about us at #LI-IM1SOX control responsibilities may be part of this role, which are to be adhered to where applicable.Join our social media conversations for more information about Turner & Townsend and our exciting future projects: TwitterInstagramLinkedInIt is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review. Videos to WatchOur inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change.We want our people to succeed both in work and life. To support this we promote a healthy, productive and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community.Please find out more about us at #LI-IM1SOX control responsibilities may be part of this role, which are to be adhered to where applicable.Join our social media conversations for more information about Turner & Townsend and our exciting future projects: TwitterInstagramLinkedInIt is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review. SummaryType: Full-timeFunction: Project ManagementExperience level: Mid-Senior LevelIndustry: Defense And Space

Reference: 6282We’re a national law firm with a local reach. Our legal experts are here for you. Whether it’s personal or business, we understand that everyone’s situation is different. But we’re more than just a law firm – we’re a team of people working together to help individuals and businesses navigate life’s ups and downs. Working here you’ll feel a part of our friendly and inclusive environment.We’ll value you for who you are and what you bring. We support each other and push boundaries to achieve incredible things and make a real difference to our clients and communities.We're always looking to support our colleagues to work in a way that works best for them and everyone else, including our clients, the business and the regulators. Please speak to a member of our Recruitment and Onboarding team for more information.Your Role and What You'll Be DoingAs a Client Experience Expert, you’ll be the first point of contact for our clients, ensuring excellent service in every interaction, whether with clients or colleagues, across all communication channels managed by the Contact team. You’ll join a small team within a department of around 30-60 colleagues. You’ll handle a diverse range of calls, you’ll take ownership of each query, offering guidance and support throughout the process.Handle internal and external client calls and digital enquiries across all areas of the firm, whilst upholding Irwin Mitchell’s values and ethics.Maintain confidentially and comply with Data Protection regulations in all communications.Rotate across departments within the Contact team based on client demand.Assist clients obtaining the necessary support, either directly or by directing them to the appropriate area of the firm.Update client records in computer databases with meticulous attention to detail, ensuring data accuracy.Take ownership of the client experience, prioritising the client in all interactions, and escalating any concerns to the Client Experience Leader when necessary.Maximising availability to ensure timely responses to all client queries.Adhere to all firm policies and procedures and effectively carry out all reasonable instructions.About YouExperience delivering high-quality customer service in a customer-facing, client-facing or service-based environment. Strong verbal and written communication skills, with the ability to adapt communication to different audiences. Ability to handle sensitive, challenging or emotionally difficult conversations in a professional and empathetic manner. Good IT skills, including experience using computer systems and Microsoft Office applications. Ability to manage multiple enquiries, prioritise workload and maintain accuracy when updating records and handling data. Desirable:Previous experience working in a contact centre, call centre or high-volume enquiry environment.Experience working with confidential or sensitive information and applying data protection principles.Experience using customer relationship management (CRM) systems or case management systems.Experience supporting clients across multiple communication channels, such as telephone, email, webchat or digital enquiriesOur Benefits - What We Can Offer You25 days holidays as standard plus bank holidays - You can ‘buy’ up to 35hrs of extra holiday too.Generous and flexible pension schemes.Volunteering days – Two days of volunteering every year for a cause of your choice (fully paid)Westfield Health membership, offering refunds on medical services alongside our Aviva Digital GP services.We also offer a wide range of well-being initiatives to encourage positive mental health both in and out of the workplace and to make sure you’re fully supported. This includes our Flexible by Choice programme which gives our colleagues more choice over a hybrid way of working subject to role, team and client requirements.We have been ranked in the Best Workplaces for Wellbeing for Large Organisations for 2024!Our responsible business programmes are fundamental to who we are and our purpose. We’re committed to being a diverse and inclusive workplace where our colleagues can flourish, and we have established a number of inclusion network groups across our business to support this aim. Our commitment to Social Responsibility, community investment activity and tackling climate change is a fundamental part of who we are. It’s made up of four strands: Our People, Our Community, Our Environment and Our Pro Bono.Additional Information As part of the Irwin Mitchell Group’s on-boarding process all successful applicants are required to complete the group’s employment screening process. This process helps to ensure that all new employees meet our standards in relation to honesty and integrity therefore protecting the interests of the Group, colleagues, clients, partners and other stakeholders.We carry out pre employment screening to establish your eligibility to work in the UK, criminal record and financial checks with our trusted 3rd parties.The employment screening process will fully comply with Data Protection and other applicable laws.Irwin Mitchell LLP is an equal opportunity employer.Sub-Department:Contact Centre Sub-Division:Client Experience & Operations Company:IM LLP Working Hours:Full Time Vacancy Type:Permanent :Sheffield Salary:Competitive

FindCore are thrilled to be assisting an award-winning multidisciplinary engineering consultancy with the recruitment of a Junior CAD Technician. \n Permanent position. This role will be based at the company’s Sheffield office. \n The successful candidate will support experienced Engineers and Technicians across a variety of residential, commercial and industrial projects. \n Salary \n Competitive salary, depending on experience + twice-yearly salary reviews + additional benefits \n Key Responsibilities \n\n • Produce and update technical drawings using AutoCAD.\n, • Support Civil and Structural Engineers with project drawings and layouts.\n, • Assist with General Arrangement drawings and structural detailing.\n, • Make drawing amendments following Engineer and client feedback.\n, • Maintain accurate drawing records and project documentation.\n, • Work closely with experienced Engineers and Technicians to meet project deadlines.\n, • Develop your technical knowledge across civil and structural engineering projects.\n\n Skills & Experience \n\n • Some experience or training using AutoCAD.\n, • Relevant qualification such as ONC, HNC, HND or similar would be advantageous.\n, • Applications are welcomed from junior candidates looking to develop their CAD career.\n, • Basic understanding of construction, civil or structural engineering drawings would be beneficial.\n, • Good attention to detail and accuracy.\n, • Strong organisation and time-management skills.\n, • Willingness to learn and develop within an engineering consultancy.\n, • Ability to work effectively as part of a team.\n, • Previous experience with steel, concrete, timber or reinforced concrete detailing would be beneficial but is not essential.\n\n What’s on Offer \n\n • Competitive salary with twice-yearly salary reviews.\n, • Full training and ongoing technical development.\n, • Opportunity to work across civil and structural engineering projects.\n, • Flexible start and finish times.\n, • Early finish on Fridays.\n, • 4% contributory pension scheme.\n, • Life insurance of twice annual salary.\n, • Enhanced sick pay.\n, • Discounted health cash plan.\n, • Cycle to Work Scheme.\n, • Regular company social events.\n, • Excellent long-term career progression within an established engineering consultancy.\n\n For further information on this opportunity, or any other jobs, please apply via the link below or contact FindCore in the strictest confidence.

Are you a hands-on engineer who enjoys solving technical problems and delivering outstanding customer service? Want to work for a company that genuinely values work-life balance? We're looking for an MFP Service Engineer to join our field-based Service team, installing, maintaining and repairing multifunction printers (MFPs) across the Sheffield area. \n You'll diagnose and resolve faults, carry out preventative maintenance, install new devices, train customers, manage van stock, maintain accurate service records, and work closely with our call centre to meet service level agreements. You'll also escalate complex issues when required while delivering a professional, customer-focused service. Whether your background is as a Field Service Engineer, Field Service Technician, Printer Service Engineer or Photocopier Engineer, we'd love to hear from you. \n Location: Field-based – Covering the Sheffield area in South Yorkshire Salary: Up to £31,000 basic + company car + excellent employee benefits \n You'll have proven electromechanical skills and experience servicing MFPs or printers to component level, along with strong communication, customer service and networking skills. Good time management, Microsoft Office proficiency, a good understanding of Health & Safety, GCSE Maths (or equivalent) and a full UK driving licence are essential. \n If you take pride in providing exceptional technical support and building lasting customer relationships, apply today and join a team committed to quality, innovation and outstanding service. \n

Are you a hands-on engineer who enjoys solving technical problems and delivering outstanding customer service? Want to work for a company that genuinely values work-life balance? We're looking for an MFP Service Engineer to join our field-based Service team, installing, maintaining and repairing multifunction printers (MFPs) across the Sheffield area. \n You'll diagnose and resolve faults, carry out preventative maintenance, install new devices, train customers, manage van stock, maintain accurate service records, and work closely with our call centre to meet service level agreements. You'll also escalate complex issues when required while delivering a professional, customer-focused service. Whether your background is as a Field Service Engineer, Field Service Technician, Printer Service Engineer or Photocopier Engineer, we'd love to hear from you. \n Location: Field-based – Sheffield, South YorkshireSalary: Up to £31,000 basic + company car + excellent employee benefits \n You'll have proven electromechanical skills and experience servicing MFPs or printers to component level, along with strong communication, customer service and networking skills. Good time management, Microsoft Office proficiency, a good understanding of Health & Safety, GCSE Maths (or equivalent) and a full UK driving licence are essential. \n If you take pride in providing exceptional technical support and building lasting customer relationships, apply today and join a team committed to quality, innovation and outstanding service. \n

Our client, a very reputable firm are looking to appoint a Legal Administrator for their growing business based in Sheffield. You will be tasked with providing administration support to fee earners. This is an exciting opportunity for a motivated and experienced individual to play a key role in assisting with any administration tasks and effective file handling. \n To be considered for the role, you’ll require the following essentials: \n\n • Experience of working as a Legal Administrator or Assistant\n, • Good understanding of medical terminology\n, • Knowledge of MS Office & Internal Systems\n, • Excellent communication skills – both written & verbal\n, • Strong organisational skills\n, • High attention to detail\n, • Clinical Negligence or Personal Injury experience is desirable\n\n Within this position, you’ll also be: \n\n • Opening & closing of files\n, • Entering new client details onto case management system\n, • Carrying out anti-money laundering checks on new clients\n, • Completing forms, drafting of documents & preparing correspondence\n, • Answering incoming calls and queries\n, • Arranging of meetings and appointments for clients\n, • Responding to email enquiries\n, • Carrying out general administration tasks such as printing, scanning & photocopying of documents\n, • Inputting of data and information on relevant internal databases and case management systems\n, • Carrying out ad hoc duties as required\n\n Salary & Working Hours \n Salary is £24,000 - £26,000 per annum, dependant on experience \n Working Hours are Monday – Friday, 9am – 5pm with 1 hours’ lunch \n Talk Staff Recruitment is an established division of Talk Staff Group and works with companies throughout the East Midlands and UK with roles including many areas such as: Accountancy & Finance, Human Resources, Marketing, Contact Centre and Office Support. \n Talk Staff Recruitment act as an Employment Agency in relation to this vacancy. \n See our website for more details and jobs available - \n

Senior Commercial Account Handler Are you an experienced Commercial Account Handler looking for a brokerage where your technical expertise is valued, your voice is heard, and there is a genuine opportunity to progress your career? We're partnering with a well-established and growing insurance broker in South Yorkshire that is looking to strengthen its Broking Operations team with the addition of an experienced Senior Commercial Account Handler. This is an excellent opportunity to join a professional and supportive environment where you'll take ownership of a portfolio of commercial clients, working closely with Account Executives and insurers to deliver outstanding service and retention results.The office offers excellent access from Sheffield and the surrounding areas, with strong transport links and nearby amenities. You'll be responsible for the full range of account handling duties including renewals, MTAs, policy administration and day-to-day servicing, whilst also acting as a technical referral point within the team and building strong relationships with clients, colleagues and insurer partners. What We're Looking For\n\n • Minimum 3 years' commercial insurance account handling experience within an insurance broker\n, • Strong technical knowledge across a range of commercial insurance products\n, • Experience handling renewals, MTAs and day-to-day client servicing\n, • Experience dealing directly with insurers and supporting placement activity\n, • Good understanding of FCA regulations and Consumer Duty\n, • Experience using Acturis or a similar broking platform\n, • Excellent communication and stakeholder management skills\n, • Ability to manage a portfolio with minimal supervision\nWhat's On Offer?\n\n, • Salary circa £40,000 - Depending on experience\n, • Annual bonus\n, • Hybrid working (3 office days per week)\n, • Join a respected and growing brokerage\n, • Supportive and collaborative team culture\n, • Opportunity to become a key technical member of the team\n, • Genuine long-term progression opportunities, including future leadership pathways\n, • Excellent office location with strong transport links and nearby amenities\nIf you're an experienced Commercial Account Handler looking for your next move and would like to explore a confidential opportunity, we'd love to hear from you.

Job Title: Electrical TechnicianLocation: South Yorkshire (UK wide travel)Salary: Competitive (DOE) We're partnering with a specialist engineering company that designs and builds bespoke systems for customers across a range of high-technology industries.Due to continued growth, they're looking for an experienced Electrical Technician to join their expanding engineering team. This is a hands-on role involving the assembly, wiring, testing, installation, and commissioning of bespoke systems. Working on a wide variety of custom-built projects, you'll split your time between the workshop and customer sites across the UK.About the Role\n\n • Assemble and wire bespoke electrical control panels and instrumentation systems.\n, • Build 19" rack systems, wiring looms, harnesses, interface boxes, and control units.\n, • Carry out mechanical assembly of enclosures, frames, and electromechanical systems.\n, • Perform electrical testing, including continuity, functional, and fault-finding activities.\n, • Install and commission systems at customer sites, including single- and three-phase electrical installations.\n, • Complete electrical wiring, cable routing, termination, and equipment installation.\n, • Produce and maintain testing records, site reports, RAMS, and engineering documentation.\n, • Support workshop operations, stock control, and continuous improvement activities.\n, • Work closely with engineers and project teams to deliver high-quality bespoke systems.\nAbout You\n\n, • NVQ Level 3 (or equivalent) in Electrical Installation, Electrical Maintenance, or a related discipline.\n, • 18th Edition Wiring Regulations qualification.\n, • Previous experience building and wiring electrical control panels or bespoke electrical systems.\n, • Ability to read and interpret electrical schematics and engineering drawings.\n, • Experience with panel layout, component mounting, cable routing, termination, and panel fabrication.\n, • Practical electrical fault-finding and troubleshooting skills.\n, • Experience installing and commissioning electrical systems on customer sites.\n, • Good IT skills, including Microsoft Office and electronic documentation.\n, • Strong understanding of electrical safety regulations and safe working practices.\n, • Full UK driving licence and willingness to travel across the UK (approximately 25%).\nDesirable Skills\n\n, • Experience working with Siemens, Beckhoff, or other PLC-based control hardware.\n, • National Instruments (NI) instrumentation experience.\n, • City & Guilds 2391 (Inspection & Testing) or equivalent.\n, • ECS/JIB Card.\n, • AM2 qualification.\n, • IPAF and/or PASMA certification.\n, • Experience with EPLAN or similar electrical documentation software.\n Please note, we cannot offer sponsorship for this position. If interested, please send over an updated CV.

CNC Manufacturing Engineer / Supervisor \n Rotherham \n Monday-Friday, 8:00am-4:00pm \n About the Role \n An exciting opportunity has arisen for an experienced CNC Manufacturing Engineer / Supervisor to join a well-established and growing manufacturing business based in Rotherham. \n This is a hands-on leadership role where you will be responsible for supporting day-to-day machining operations, developing manufacturing processes, improving efficiencies, and leading a team of CNC and manual machinists. Working closely with senior production leadership, you will play a key role in ensuring production targets are achieved while driving continuous improvement initiatives across the department. \n Key Responsibilities \n\n • Support the delivery of production schedules and operational targets.\n, • Lead, coach and support a team of CNC and manual machinists.\n, • Ensure operators have the tools, equipment and information required to complete work efficiently.\n, • Develop, review and improve manufacturing methods and machining processes.\n, • Design and implement work-holding solutions.\n, • Review CAD models and extract manufacturing information.\n, • Create, edit, verify and simulate CNC programs.\n, • Provide technical support and process prove-out assistance on the shop floor.\n, • Produce and maintain technical documentation including SOPs, tooling sheets and inspection reports.\n, • Support continuous improvement activities and lean manufacturing initiatives.\n, • Collaborate with engineering and design teams to resolve technical challenges.\n, • Promote high standards of quality, safety and housekeeping throughout the department.\n\n About You \n To be successful in this role, you will have a strong machining background combined with supervisory or team leadership experience within a manufacturing environment. \n Essential Skills & Experience \n\n • CNC machining experience, including milling and turning.\n, • Experience programming CNC machines.\n, • Fanuc and/or XYZ control experience.\n, • Strong CAD/CAM knowledge.\n, • Previous team leader, supervisor or cell leader experience.\n, • Good understanding of engineering drawings and manufacturing processes.\n, • Knowledge of inspection methods and measurement techniques.\n, • Excellent communication and organisational skills.\n, • Strong problem-solving ability and attention to detail.\n, • Proficiency in Microsoft Office applications.\n, • Lean Manufacturing experience.\n, • Experience implementing 6S or workplace organisation initiatives.\n, • Time-served apprenticeship within a toolroom or machining environment.\n, • Leadership or management qualifications such as ILM.\n\n We're looking for an enthusiastic and motivated individual who: \n\n • Leads by example.\n, • Is passionate about health and safety.\n, • Enjoys mentoring and developing others.\n, • Takes ownership and drives results.\n, • Thrives in a fast-paced manufacturing environment.\n, • Can identify and implement process improvements.\n, • Works well under pressure and to deadlines.\n, • Demonstrates a positive, flexible and proactive attitude.\n\n What's on Offer? \n\n • Permanent, full-time position.\n, • Day shifts only, Monday to Friday.\n, • Opportunity to join a stable and growing manufacturer.\n, • Varied role combining technical expertise and leadership.\n, • Ongoing training and development opportunities.\n, • Competitive salary dependent on experience.\n

Component Marking Technician \n Sheffield Area \n Salary: £13.90ph day rate / £20.85 night rate \n Shift Patters / Working Hours: \n Days (38 hours): Monday - Thursday: 7:15am - 16:00pm & Fridays 7:15am - 12:15pm. \n Nights (40 hours): Monday - Wednesday: 18:00pm - 6:00am & Thursdays 16:00pm - 20:00pm \n day/nights are alternate each week \n About the Role \n We are currently recruiting for a Component Marking Technician to join a leading precision engineering and manufacturing business serving highly regulated industries. \n This is an excellent opportunity for someone with manufacturing experience who enjoys detailed, hands-on work and takes pride in maintaining high quality standards. The successful candidate will be responsible for marking and identifying components using a variety of specialist marking methods, ensuring all products meet customer and traceability requirements. \n Key Responsibilities \n\n • Operate specialist marking equipment including:\n \n, • Dot Peen\n, • Vibro Etching\n, • Chemical Etching\n, • Ink Marking Systems\n, • Hand Etching\n \n\n\n, • Ensure all markings meet customer specifications and quality standards.\n, • Verify that markings are clear, accurate and fully traceable.\n, • Work closely with production and planning teams to meet manufacturing schedules.\n, • Carry out pressure testing activities where required.\n, • Apply protective coatings as part of production processes.\n, • Identify and report product defects and support quality investigations.\n, • Handle precision-engineered components with care and attention.\n, • Complete routine equipment checks and assist with basic maintenance activities.\n, • Maintain high housekeeping and health & safety standards.\n\n Candidate Requirements \n\n • Experience working within a manufacturing, engineering or production environment.\n, • Ability to read and follow detailed work instructions and engineering drawings.\n, • Good understanding of quality standards and traceability requirements.\n, • Strong numeracy and literacy skills.\n, • Computer literacy, including Microsoft Office.\n, • Good understanding of health and safety practices.\n, • Ability to work independently and efficiently.\n, • Flexible approach with willingness to learn new skills.\n, • Strong attention to detail and commitment to quality.\n, • Excellent communication and teamwork skills.\n, • Experience within aerospace, engineering or precision manufacturing.\n, • Knowledge of component traceability requirements.\n, • Understanding of tooling and fixtures.\n, • Experience working in a fast-paced manufacturing environment.\n\n The ideal candidate will be a reliable, motivated individual with a positive attitude and a strong eye for detail. You will take pride in producing high-quality work, be adaptable to changing business needs, and enjoy working as part of a collaborative team. \n If you have experience in manufacturing and are looking to develop your career within a quality-driven engineering environment, we'd love to hear from you.

Mechanical Maintenance Engineer (Commercial Laundry) \n Sheffield \n £38,480 Basic + Regular Overtime (OTE £44,000+) + Company Phone + Excellent Benefits \n Permanent | PM Shift \n We are currently recruiting for a Mechanical Maintenance Engineer to join a long-established commercial laundry business based in Sheffield. \n This is an excellent opportunity to join a highly successful family-owned company that has been operating for over 130 years. With an annual turnover of £9-10 million, the business has built a reputation for quality, reliability and exceptional customer service. More importantly, they have built a loyal workforce by genuinely looking after their employees and providing long-term career stability. \n The company remains family-owned, with the owners actively involved in the business and committed to its future, offering a level of security and stability that is increasingly difficult to find. \n The Role \n Working as part of a close-knit engineering team of five, you will be responsible for maintaining, repairing and improving a wide range of commercial laundry machinery and equipment to ensure the smooth running of the operation. \n This role is ideally suited to a mechanically biased engineer who also possesses good electrical fault-finding skills. Formal electrical qualifications are not essential, but you should be comfortable working with electrical systems and diagnosing faults. \n Key Responsibilities \n\n • Carrying out planned preventative maintenance (PPM)\n, • Responding to equipment breakdowns and carrying out fault finding\n, • Mechanical repairs and component replacement\n, • Basic electrical diagnostics and troubleshooting\n, • Supporting machinery upgrades and continuous improvement projects\n, • Working closely with production teams to minimise downtime\n, • Maintaining high standards of health and safety\n\n Requirements \n\n • Previous maintenance engineering experience within manufacturing, production, laundry, FMCG or similar environments\n, • Strong mechanical maintenance skills\n, • Good electrical knowledge and fault-finding ability\n, • Positive attitude and willingness to learn\n, • Strong communication skills\n, • Reliable and dependable work ethic\n, • Ability to work independently and as part of a team\n\n Working Hours \n\n • Monday to Friday\n, • PM Shift: 2:30pm - 11:45pm\n, • 40 hours per week\n\n Please note: As part of this role, engineers are expected to work an additional 5 hours overtime on either a Saturday or Sunday on approximately 46 weekends per year. These hours are paid at time and a half and form part of the expected earnings package. \n There are also further overtime opportunities available for those wishing to increase their earnings. \n Salary & Benefits \n\n • Basic salary of £38,480 per annum\n, • Expected earnings of £44,000+ per annum including regular weekend overtime\n, • Additional overtime available\n, • Company mobile phone provided\n, • 27 days annual leave\n, • Christmas Eve, Christmas Day and New Year's Day off\n, • Bank Holidays worked as part of the operation\n, • All PPE provided\n, • Potential company vehicle after 12-18 months\n, • Stable long-term employment with a respected family-owned business\n, • Supportive management team and excellent working environment\n\n If you are a mechanically biased engineer looking for a secure, long-term opportunity with a company that genuinely values its employees, we would love to hear from \n you. \n \n INDWIN \n Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see Many Thanks

An extraordinarily talented group of individuals work together every day to drive TNS' success, from both professional and personal perspectives. Come join the excellence!OverviewSUMMARY OF ROLEThis role will involve participation at all stages of the project lifecycle, including contribution to pre‑sales and bids, requirements analysis, solution design and systems architecture, documentation, testing, implementation, and post‑implementation support.ResponsibilitiesPrincipal ResponsibilitiesProvide effort and cost estimates for new project work.Liaise with customers and internal teams to define and document system requirements.Liaise with vendors and third parties to define and document system requirements.Analyse and design technical solutions to meet user requirements and resolve issues.Conduct impact analysis and produce technical designs for changes relating to card scheme mandates (including but not limited to LINK, Visa, MasterCard, Union Pay International, DFS/Diners, American Express, JCB).Produce test documentation for new software releases, including test plans, test conditions, and test scripts, in line with TNS Test Methodology and procedures.Produce operational procedures for project-related and support-related changes.Produce implementation instructions and release control documentation.Act as a technical interface to the TNS Test Team, driving issue resolution with all required internal and external parties. Support technical setup of test tools and simulators where required.Support and perform software implementation tasks.Fully document solutions and provide technical handover to relevant TNS teams, including Development, Support, and Operations.Ensure technical standards are upheld throughout the project lifecycle in alignment with TNS development and technical standards.Ensure technical solutions meet all required compliance and security mandates, including PCI‑DSS.Take technical ownership of end‑to‑end solutions.Provide peer review and technical support to other TNS Development team members.QualificationsADDITIONAL RESPONSIBILITIESEnsure that the Company’s overall Quality Objectives are met in the execution of job responsibilities.Contribute to the continuous improvement of development processes and procedures.Comply with the current TNS Information Security Policy.Maintain confidentiality when handling customer information and payment data.Understand and adhere to contractual requirements to ensure the integrity of data and the availability of services at all times.Understand and apply the appropriate departmental standards.Report progress to management.Provide handover of work to other TNS Development team members as required.Perform other duties as may be required.CANDIDATE REQUIREMENTSPersonal SkillsTechnical leadershipApplications analysisLogical approach to problem solvingConsistent attention to detailStructured analytical approachHigh level of accuracyGood written and verbal communication skillsStrong time management skillsProfessional approach to client and supplier managementAbility to multitaskFlexibilityDesired Technical SkillsDatabases (SQL desirable)Good understanding of one or more operating systems, ideally Windows and LinuxUnderstanding of payment systems and protocols (e.g., ISO 8583)Desired Knowledge / ExperiencePrevious use of an industry-strength payment application (e.g., Postilion, Tango, Authentic)Knowledge of payment schemes (e.g., LINK, Visa, MasterCard, UnionPay, Diners, JCB, American Express)Proficiency with Microsoft Office applicationsUnderstanding of PCI DSS requirementsExperience in system analysis and designExperience with testingAdditional Useful Knowledge / ExperienceIBM Mainframe (including COBOL programming)Visual Basic programmingJava programmingScripting languagesFileXpress / SFTPIf you are passionate about technology, love personal growth and opportunity, come see what TNS is all about!TNS is an equal opportunity employer. TNS evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic.SummaryLocation: GBR - Sheffield; GBR - London; GBR - Virtual - South; GBR - Virtual - NorthType: Full time

Job titleArea Sales ManagerFunctionSME Field SalesLocationHome BasedReports toRegional Sales ManagerResponsible for staffN/AAbout our businessJLA is a mission critical infrastructure solutions business offering services Laundry, Catering, Heating, Fire Safety, Infection Control and Air Conditioning.The company offers an end-to-end, on premise, machine supply and breakdown service proposition under the name Total Care, and additional products and services. JLA is driven by a world class Sales & Marketing engine, owns and maintains all assets, and has an efficient on-site operations team working with daily with customers.When you join the JLA family, you'll also gain access to an extensive benefits package.We care about our people and take your well-being seriously, which is why we offer a range of supportive tools for health and wellbeing, financial guidance, and legal advice. Our Employee Assistance Programme, 24/7 Wellness and Lifestyle App plus a dedicated team of Mental Health First Aiders are there to support you through life's challenges. We also offer up to 8 counselling sessions, which can be in-person or remote, providing you with the support and flexibility to suit your own personal needs.You can reach any fitness goals with our free onsite gym at head office along with a range of other gym membership discounts available.To offer financial support, we not only provide life assurance coverage, company sick pay, and a company pension scheme, we offer a range of added benefits such as free office parking, eye care vouchers, a cycle-to-work scheme, and exclusive discounts through our staff benefits hub.We really pride ourselves in offering a healthy work-life balance and believe it is important to have time away to recharge which is why we provide 25 days of annual leave plus bank holidays, flexible working options, and enhanced family leave policies.We are a company that appreciates you and invests in your success and even have a Colleague Recognition Scheme to celebrate your achievements. We're dedicated to your growth, offering support in career development and training. We value your referrals, and through our Refer a Friend scheme, you can earn up to £1,000 in bonus rewards!Role overviewYou will be responsible for contributing to the delivery of the Sales Strategy for our SME Division. Reporting to the Regional Sales Manager and responsible for driving commercial growth first and foremost. Expanding JLAs footprint within existing accounts and acquiring new customers across a range of industry sectors, you will be a key contributor to the success of the sales team.Key tasksDeliver against the sales strategy set for the SME teamEnsure the division is focused on the core disciplines of winning new customers and developing and retaining existing customersWork closely with colleagues in ensuring effective lead management and conversionIncrease the growth potential in existing accounts and acquiring new clientsCement and drive key customer relationships together with account managers in your teamWork on strategic projects and initiatives as required, focusing on increasing the efficiency and productivity of the sales team and expansion of the business in the SME baseDrive value and number of customers with recurring revenue plans with JLA.Improve the cross-sell of products to JLAs existing customer baseUnderstanding target markets, including industry, company, project, company contacts and which market strategies can be used to attract clientsDeveloping and delivering presentations to secure new businessFollowing the latest industry developments and staying up to date on corporate competitorsTo determine the pricing structure for the client, in line with JLA pricing strategy, obtaining senior level approval as requiredService DeliveryDemonstrate an understanding of what service delivery excellence is for your roleEnsuring you set a culture of excellent customer service ensuring the basics are right every time and lead a team where service is central to good performanceWork collaboratively with teams in Operations to ensure that sales and service SLAs are deliveredManaging RiskAwareness of your operational and regulation risks which may impact on your roleResponsibility for reporting to your line manager any risk which may impact the businessManaging Health & SafetyEnsuring you deliver your role within the Compliance framework set.CriteriaEssential (attributes required for candidate to be considered)Desirable (attributes can be trained or developed)Knowledge and Skills (what you know and what you can do)Demonstrate a proven track record in solutions sales.We are looking for you to have knowledge and experience in dealing with deals to multisite and larger organisations and have a consultative approach in dealing with client requirements.You will be a strong communicator capable of handling varied client types with ease.You will need to have an understanding of the install and service marketplace.Experience (what you have done)Successful track record in delivering ambitious growth plans.Were looking for you to have experience in a longer sales cycle.Negotiation and presentation skills are fundamental to gaining new business.You will have experience in dealing with, SME decision makers.You will have a successful track record in selling products using financial justification to demonstrate value to your customers.You will have gained experience of leading a sales team.Possess an understanding of our products, our competition in the industry and positioning.Personal qualities(the way you think and act)You will be highly Performance driven and be able to focus where the primary goal is to drive revenue growth.You will be highly resilient and able to operate successfully in a fast-paced environment, with ability to drive business results.Action orientated, Down-to-earth, energetic, pragmatic, and willing to roll up your sleeves.This role is home based, so you will have the ability to manage yourself without supervision and provide clear strategy plans to the management team.You will be a consummate sales professional, and an ambassador for the JLA brand.QualificationsWe will need you to have a full UK diving license as the role involves UK travel.TPBN1_UKTJ

Fairfield School of Business is where ambition meets opportunity. Established in 2006 and registered with the Office for Students, FSB is a fast growing and high performing higher education provider. We deliver career-focused qualifications across a range of subjects in partnership with leading UK universities.With over 200 expert staff, a strong and growing turnover, and campuses across England, including London, Birmingham, Leicester, and Sheffield, FSB combines the strength of a national organisation with a personalised, student first approach.At FSB, we specialise in opening doors. We support students from diverse backgrounds, including those returning to education, balancing work and family commitments, or without traditional qualifications. Our flexible study options and inclusive learning environment are designed to help every student succeed.Joining FSB means being part of an organisation that is committed to transforming lives through education. We empower students with the confidence, skills, and support they need to achieve their goals and build their future.Overall Purpose of the RoleThe Senior Lecturer in Business plays a key role in supporting the effective delivery and continuous development of teaching and learning. The post-holder will be responsible for planning, delivering and evaluating high-quality, innovative teaching that supports student engagement, achievement and progression.Working collaboratively with teaching and supporting staff members, the Senior Lecturer will establish and maintain strong professional relationships and contribute to the teams performance. The post-holder will participate in service planning, delivery, monitoring and review to support the ongoing improvement of academic provision and ensure a high standard of student support and customer care. They will also engage in relevant staff development and training opportunities to continually enhance their teaching practice and academic responsibilities.Key Responsibilities (including but not limited to) :Deliver high standards of teaching and learning, and monitor assessment processes in accordance with examination requirementsProduce schemes of work, lesson plans, assessment plans, learning materials and any other related activities that impact the effectiveness of learningMark assignments by a specified deadlineAssist in the identification of students individual needs and Act as a Personal Tutor to studentsAttend appropriate meetings between departmentsProvide and maintain records of formative and summative assessments of students learningIdentify, share and embed good practice and resources in teaching, learning and assessment and course/subject leadership.Produce digital material, webinars, lecture recordings, marketing material and/or any other related material as and when requiredEngage in the quality assurance process and demonstrate an understanding of the regulations associated with the awarding bodiesDissertation supervision of UG and PG studentsMaintain own continuing professional developmentEnsure compliance with the Schools Health and Safety policyContribute to departmental, faculty, or company-wide working groups or committees as requestedUndertake any other appropriate duties as requested by the Dean.Person SpecificationEssentialExperience teaching and learning at undergraduate, postgraduate or equivalent levelRelevant Masters degreeWorking towards or holding a Postgraduate Certificate in HE (PGCert) or equivalent.Working towards or holding a Fellowship of the Higher Education Academy (FHEA).Strong organisational and record-keeping skillsExperience of working with students within a Higher Education or Further Education settingAbility to convey ideas to students from a wide range of backgrounds and with very diverse experiencesDesirableWorking towards or holding a PhD in a relevant disciplineWorking towards or holding a Senior Fellowship of the Higher Education Academy (SHEA).Experience supervising dissertationsExperience in Module LeadershipExperience in teaching research methods and supporting students in selecting research topicsAn understanding of the UK professional frameworksKnowledge of HE quality assurance processesWork-Life Balance: We aim to support and provide a healthy work-life balance for employees who may have personal commitments through the following:Flexible working hoursWorking from home opportunitiesGenerous annual leave (33 days including bank holiday) increasing to 38 days after three years of continuous service)Additional leave between Christmas and New Year, in addition to all public holidaysSpecial leave and compassionate leave for important occasionsFinancial Benefits: The financial well-being of our staff is vitally important to us. We aim to provide:A progressive pay structure with competitive salariesTax-efficient pension scheme by AvivaRelocation allowanceGift VouchersHardship assistance in exceptional circumstancesHealth & Wellbeing: We support staff with their health and wellbeing through the following:Vitality at work includesAnnual health checksMental health supportVarious rewards and discounts for healthy living, such as Gym membershipPersonal and Professional Development: We are committed to the ongoing professional development of our staff. We provide various internal and external training programmes, which include:A range of job-specific training programmes to support your career pathGraduate and Trainee schemes for entry-level academicsSubsidised Advance HE membershipTeam building and celebratory eventsFSB IS COMMITTED TO EQUAL OPPORTUNITIES AND REPRESENTING THE DIVERSITY OF THE COMMUNITIES WE SERVE .Schedule: Includes evenings and weekends.TPBN1_UKTJ

Office Manager Structural Building ProductsJob Title: Office Manager Structural Building ProductsIndustry Sector: Construction Accessories, Groundwork, Concrete Frame, Reinforced Concrete Spacers, Construction Chemicals, Rebar Couples, Reinforcement Joints, Connectors, Civil Engineering, Infrastructure, Drainage and Construction, Sales Executive, Internal Sales, Groundwork Contractors, Civils Contractors, Telesales, Operations Manager, Account Manager, Office Manager, Purchasing, Estimating, Office Administrator, AdministratorOffice location: RotherhamRemuneration: £40,000 - £45,000 + 25 days holiday, pension, healthcare and life insuranceThe role of the Office Manager Structural Building Products will involve:Office Manager position promoting a high quality manufactured range of construction accessories such as; steel rebar and reinforcement jointsLarge of your time will be spent fulfilling admin & purchasing dutiesControlling P&LWill be required to perform some estimating / costing responsibilitiesSelling to contractors & distributors from an internal sales prospectiveSupport the operation manager to perfect process changesThe ideal applicant will be an Office Manager Structural Building Products with:Must have office management experience within the construction sectorIdeallyhave an engineering and/orhave an understanding of concrete reinforcement, construction accessoriesMay consider a senior sales administration / purchasing candidate if you have estimating, sales & P&L experienceOpen minded with good communication skillsPersonable, people person, driven and enthusiasticMitchell Maguire is a specialist Construction Field Sales Recruitment Consultancy, dealing exclusively with Construction Field Sales Jobs, Construction field sales vacancies and Specification field sales positions within: Construction Accessories, Groundwork, Concrete Frame, Reinforced Concrete Spacers, Construction Chemicals, Rebar Couples, Reinforcement Joints, Connectors, Civil Engineering, Infrastructure, Drainage and Construction, Sales Executive, Internal Sales, Groundwork Contractors, Civils Contractors, Telesales, Operations Manager, Account Manager, Office Manager, Purchasing, Estimating, Office Administrator, AdministratorTPBN1_UKTJ

At Places for People, we hire People, not numbers! So, if you like the sound of one of our jobs, please apply - you could be just who we're looking for! Of course, experience and track record are important, but we're more interested in hiring someone that embodies our People Promises. That's someone that does the right thing, is enthusiastic and motivated to grow, believes in Community spirit, is respectful and enjoys their work. As the UK's leading Social Enterprise, we're dedicated to creating inclusive and thriving Communities for both our Customers and Employees.So, what are you waiting for? Join a Community that cares about you!More about your roleYou will take an active role to engage with residents to promote safe and secure independent living, ensuring an engaging vibrant environment to reduce isolation. Providing advice on rent and service charges, assisting with benefits claims and supporting customers with their financial needs. You will work with the internal Places for People income recovery team to reduce rent arrears. You will be assisting in compliance.T ravel within local geographical areas will be required.This post is subject to a satisfactory enhanced disclosure from the Disclosure and Barring service.For more information, please download our job profile available on our website.More about youIt is essential that you have experience/knowledge of housing management andwellbeing of Retirement/Extra Care living services. You will possess good computer skills with knowledge of all Microsoft Office applications, including Word, Excel and PowerPoint.Effective communication skills both written and verbal, with the ability to build great relationships with customers, partners and colleagues is required. It is important that you have a good mix of team player' attributes but also the ability to work effectively using your own initiative; as there will, be an element of lone working. You will also have an awareness of Health & Safety.The ideal applicant will have experience of all aspects of housing management including manging anti-social behaviour and challenging situations.A driving license and own car for business use is preferred for this role.Commitment to Trauma Informed PracticeAt Places for People, we are committed to creating safe and supportive environments for individuals who have experienced trauma. We understand that trauma can have a profound impact on individuals, and we are dedicated to recognising the signs and symptoms of trauma, practicing empathy and respect, and using trauma-informed language. We are also committed to providing individuals with choice and autonomy, and to working collaboratively to empower them to re-establish control of their lives.BenefitsWe are a large diverse and ambitious business, which will give you all the challenge you could wish for.We know that there's always more we can do to make you smile, that's why we offer a comprehensive benefits package with each role, yours will include:Competitive salary, with a salary review yearlyPension with matched contributions up to 7%Excellent holiday package 35 days annual leave with the option to buy or sell leaveCashback plan for healthcare costs up to £500 saving per yearA bonus scheme for all colleagues at 2%Training and developmentExtra perks including huge discounts and offers from shops, cinemas and much more.What's next?If you meet the criteria and are ready to make the next step in your career then click apply. You will be redirected to our careers site where you can discover more about the role, read a full job description and apply directly to us.As part of ourcommitment to diversity and inclusion, we offer a guaranteed interview to candidates who are disabled, neurodiverse, or have served in the Armed Forces, provided they meet the essential criteria for the role. If you would like to be considered under this scheme, please indicate this in your application. We are dedicated to creating a supportive and accessible recruitment process for all.We are committed to creating an inclusive and accessible recruitment process. If you require any reasonable adjustments to support your application or interview experience, please let us know. We're happy to work with you to ensure you have the opportunity to perform at your best.If you are a Places for People customer and you're looking for support with your application, please contact our skills and employment team on .W e understand the importance of a supportive and inclusive work culture so please talk to us at interview about flexibility you may need. We can't promise to give you exactly what you want, but we promise not to judge you for asking. For this role we are open to discussing the possibility of reduced hours, flexible start and finish times or compressed hours.If you are a recruitment agency please note we operate a PSL and do not take cold callsSafeguardingAt Places for People, safeguarding is everyone's responsibility. We are committed to creating safe communities for our customers and colleagues by protecting children, young people, and adults at risk from harm, abuse, and neglect.We follow robust safeguarding policies and procedures, ensuring all employees, volunteers, and contractors uphold the highest standards of safeguarding and accountability. Our recruitment process includes pre-employment checks, including Disclosure and Barring Service (DBS) checks where applicable, to promote a safe and secure working environment.By joining Places for People, you are expected to contribute to our safeguarding culture, following our policies and reporting concerns to protect those in our communitiesTPBN1_UKTJ

Our client, a leading manufacturer of chilled, frozen and ambient convenience foods are currently looking to recruit a number of Class 1 / LGV C&E Trunking drivers to work on their behalf.Based out of their flagship Sheffield manufacturing site you will be responsible for delivering product nationwide to RDCs.LGV C+E Driver Job Description:As a Class 1 / LGV C+E Driver, you will be responsible for safe and efficient product transportation across the country. Key duties include completing necessary transport administration, driving in a fuel-efficient manner, ensuring compliance with all EU Driver Hours and RTD Regulations, maintaining correct temperature specifications during transportation, adhering to safe systems of work, and conducting pre and post vehicle checks. Our client values their drivers' well-being and offers an uninterrupted minimum of 8-hour shifts without any breaks being deducted.LGV C+E Driver Rates (PAYE):Mon-Sat £18.11Sun - £19.61Requirements:Hold a full HGV C+E driving licence.Possess a minimum of 24 months' driving experience for Driver Negligible Incident (DNI).Demonstrate a good level of English speaking and written communication skills.Have a maximum of 6 points on your licence for minor offenses (DD, TT, DR, CD, IN endorsements will not be accepted).Possess a UK Driving Licence, Digi Tachograph Card, and CPC Card.LGV C+E Driver Benefits:Driving an HGV - Class 1 vehicle.Additional routes available for longer shifts.No handballing required.Clean and well-maintained work environment.Immediate starts.On-going shifts.Paid holidays.Weekly pay.Subsidized canteen.Free on-site car parking24-hour support from our dedicated on-call driving teamTemporary to permanent opportunitiesTo apply, please call the office on 0114 276 0501 and ask to speak to a member of the driving team.We look forward to hearing from you.Unfortunately, due to the high volumes of applications, we are only able to contact candidates who are successful in progressing to the next stage. If you have not been contacted within 7 days of your application, then please presume that you have not been successful on this occasion and continue to search on our website for future vacancies.TPBN1_UKTJ

Starting on £33,714 you will increase £1,000 each time after completing 6 and 12 months of service to £35,714 per annumRole summary:To deliver customers products to the required premises ensuring all customers receive exceptional customer service as part of a multi-drop delivery route. The driver will ensure that all products are transported safely to the customers premises, treating their freight as if it were their own.Key responsibilitiesRepresent DX in a professional manner at all timesDrive vehicles in a safe and legal manner ensuring compliance with all legal and company requirements at all timesAll daily checks are undertaken ensuring defects are immediately reported and correct paperwork completedEnsure all product are scanned using DX scanning equipmentEnsure all deliveries are loaded safely prior to leaving the depotObserve DX procedures and policies at all timesManage your routing to ensure premium and timed deliveries are achievedEnsure the correct equipment and PPE, (personal protective equipment) is in good order and used at all timesEnsure all delivery and on road issues are reported to the traffic office immediatelyEnsure the customer receives their deliveries in excellent condition every timeDeal with any customer issues in a polite and effective mannerEnsure collections are made in line with given instructions and timesEssential CriteriaMust hold C1 or above on licence with valid DQC and Tacho cardMaximum of 6 points on licence and no bansTakes pride in delivering exceptional customer serviceAbility to build a rapport with customersBenefits:Competitive Rates of PayCompany Funded Health Cash PlanHolidays: 20 days increasing with length of service + bank holidaysLong Service Recognition schemeEnhanced Maternity & PaternityCompany Pension SchemeLife AssuranceEmployee Assistance programme including 24/7 Virtual GPDX Discounts PortalAs a 7.5t driver, and part of the DX family, you will have the opportunity to progress further and to receive training in the future to attain HGV C+E as part of our Driver Academy once you have qualified for the scheme.Excellent opportunities for career progression and more!!All about youYou will be friendly, hard-working and love the buzz of getting things done. We value team players and here at DX we are committed to providing our people with the technical and personal skills to progress their careers.About usWe are a leading independent parcel, mail and logistics services company operating throughout the UK and Ireland delivering the important things in life. DX Freight provides next-day or scheduled delivery services for parcels and freight, as well as comprehensive logistics solutions, including warehouse management and the operation of customer-liveried vehicles. Our brand is what we do every day and our values set the tone for how we want our colleagues to go about their business of delivering the Delivered Exactly promise.What will it feel like to be part of our team?At DX, we know our people are our foundation of success. We are passionate about your career progression with us. We strive to develop and promote from within whenever we can, so if you want to develop your career DX will provide the training and the opportunities!We look forward to hearing from you!TPBN1_UKTJ

FindCore are thrilled to be assisting an award-winning multidisciplinary engineering consultancy with the recruitment of a Senior CAD Technician. \n Permanent position. This role will be based at the company’s Sheffield office. \n The successful candidate will work alongside Civil and Structural Engineers on a varied range of residential, commercial and industrial developments. \n Salary \n Competitive salary, depending on experience + twice-yearly salary reviews + additional benefits \n Key Responsibilities \n\n • Produce and update technical drawings using AutoCAD.\n, • Prepare General Arrangement drawings, structural layouts and construction details.\n, • Support structural projects involving steel, concrete, timber and reinforced concrete.\n, • Assist Civil Engineers with external works, site layouts and drainage drawings.\n, • Work across projects ranging from individual residential properties to larger commercial and industrial developments.\n, • Coordinate drawings with Engineers, Architects and other members of the project team.\n, • Maintain accurate drawing information and support projects through agreed deadlines.\n, • Assist and support more junior Technicians where appropriate.\n\n Skills & Experience \n\n • Previous experience working as a CAD Technician, Engineering Technician or in a similar role.\n, • Good working knowledge of AutoCAD.\n, • Some experience within civil, structural or construction-related engineering.\n, • Understanding of technical drawings and construction detailing.\n, • ONC, HNC, HND or similar Civil/Structural Engineering qualification would be advantageous but is not essential.\n, • Experience with steel, concrete, timber or reinforced concrete detailing would be beneficial.\n, • Exposure to external works or drainage drawings would also be advantageous.\n, • Good attention to detail and ability to work accurately to deadlines.\n, • Strong communication skills and willingness to continue developing technically.\n\n What’s on Offer \n\n • Competitive salary with twice-yearly salary reviews.\n, • Flexible start and finish times.\n, • Early finish on Fridays.\n, • Ongoing technical training and professional development.\n, • Broad exposure across both civil and structural engineering projects.\n, • 4% contributory pension scheme.\n, • Life insurance of twice annual salary.\n, • Enhanced sick pay.\n, • Discounted health cash plan.\n, • Cycle to Work Scheme.\n, • Regular company social events.\n, • Excellent long-term progression opportunities within an established engineering consultancy.\n\n For further information on this opportunity, or any other jobs, please apply via the link below or contact FindCore in the strictest confidence.

We are working with a national law firm with a strong regional presence, known for combining high-quality legal expertise with a genuinely people-focused approach. \n They understand that every client situation is different, whether personal or commercial, and pride themselves on providing clear, practical support through all stages of life and business. The team itself is described as friendly, inclusive, and collaborative, with a real emphasis on working together to achieve strong outcomes for clients and the communities they support. \n They are also committed to flexible and modern working practices, supporting colleagues to work in a way that balances business needs, client service, and personal circumstances. \n \n Your Role \n \n This is an excellent opportunity for an ambitious Costs Draftsperson or Costs Lawyer to join a growing national team. \n You will be involved in the preparation of Bills of Costs for Detailed and Provisional Assessment, as well as the litigation of bills through the court process. There may also be opportunities to attend advocacy hearings, subject to experience and agreement with senior fee earners. \n The role also involves regular client interaction, providing updates, taking instructions, and offering technical support to fee earners across the wider legal team. \n Ideally, you will have a minimum of 2 years’ experience in costs, either in-house or within an external costs supplier environment. \n \n About You \n\n • Experience in costs drafting (in-house or external provider)\n, • Strong interest in building a career within costs law\n, • Good understanding of legal procedures\n, • Ability to adapt to changing priorities and deadlines\n, • Strong communication skills and professional manner\n, • Comfortable engaging with internal and external stakeholders\n, • Able to work independently and as part of a wider team\n, • Desirable: ACL qualification or ILEX Part 1 (Year 1)\n, • Desirable: exposure to other legal departments or broader litigation experience\n\n Benefits \n\n • 25 days holiday + BH (option to buy more)\n, • Generous pension scheme\n, • Hybrid working - 1 day per week in the office\n, • Health membership, including medical cashback\n\n

This is a newly created senior position offering responsibility for the performance and development of an established office. It provides a good route for an experienced Practice Manager or Senior Manager looking for greater leadership responsibility within a growing accountancy group. Continued investment and expansion has created an opportunity for an experienced accountant to take responsibility for an established Sheffield office. Reporting to regional leadership, this is a broad role combining team management, client portfolio responsibility, technical oversight and the day-to-day running of the practice. Responsibilities\n\n • Lead and develop a small team of qualified and part-qualified accountants.\n, • Manage a portfolio of clients and maintain strong senior relationships.\n, • Oversee and review statutory accounts and management accounts.\n, • Maintain oversight of bookkeeping, VAT and payroll delivery.\n, • Ensure compliance with UK GAAP, Companies Act and HMRC requirements.\n, • Manage client meetings, technical queries and service issues.\n, • Improve workflows, controls and quality standards across the office.\n, • Support recruitment and development of the team as the practice grows.\nCandidate profile\n\n, • Strong experience within a UK accountancy practice.\n, • Previous team leadership or management experience.\n, • Sound technical knowledge of accounts preparation and compliance.\n, • Confident managing client relationships and providing practical advice.\n, • Experience with Xero, QuickBooks, Sage or similar software.\n, • Well organised with the ability to manage competing priorities and deadlines.\nPackage and working pattern £60,000 – £65,000, annual performance-related bonus and access to a company share scheme. 25 days' holiday plus bank holidays. IPS Finance has 45 years’ experience in the Yorkshire accountancy recruitment market. We have built our business on long term relationships with both individuals and clients in all sectors, bringing real benefits to all concerned. Please visit our website to view the latest accountancy / finance and practice opportunities.

FindCore are thrilled to be assisting an award-winning multidisciplinary engineering consultancy with the recruitment of a CAD Technician. \n Permanent position. This role will be based at the company’s Sheffield office. \n The successful candidate will support experienced Engineers and Technicians across a variety of residential, commercial and industrial projects. \n Salary \n Competitive salary, depending on experience + twice-yearly salary reviews + additional benefits \n Key Responsibilities \n\n • Produce and update technical drawings using AutoCAD.\n, • Support Civil and Structural Engineers with project drawings and layouts.\n, • Assist with General Arrangement drawings and structural detailing.\n, • Make drawing amendments following Engineer and client feedback.\n, • Maintain accurate drawing records and project documentation.\n, • Work closely with experienced Engineers and Technicians to meet project deadlines.\n, • Develop your technical knowledge across civil and structural engineering projects.\n\n Skills & Experience \n\n • Some experience or training using AutoCAD.\n, • Relevant qualification such as ONC, HNC, HND or similar would be advantageous.\n, • Applications are welcomed from junior candidates looking to develop their CAD career.\n, • Basic understanding of construction, civil or structural engineering drawings would be beneficial.\n, • Good attention to detail and accuracy.\n, • Strong organisation and time-management skills.\n, • Willingness to learn and develop within an engineering consultancy.\n, • Ability to work effectively as part of a team.\n, • Previous experience with steel, concrete, timber or reinforced concrete detailing would be beneficial but is not essential.\n\n What’s on Offer \n\n • Competitive salary with twice-yearly salary reviews.\n, • Full training and ongoing technical development.\n, • Opportunity to work across civil and structural engineering projects.\n, • Flexible start and finish times.\n, • Early finish on Fridays.\n, • 4% contributory pension scheme.\n, • Life insurance of twice annual salary.\n, • Enhanced sick pay.\n, • Discounted health cash plan.\n, • Cycle to Work Scheme.\n, • Regular company social events.\n, • Excellent long-term career progression within an established engineering consultancy.\n\n For further information on this opportunity, or any other jobs, please apply via the link below or contact FindCore in the strictest confidence.

Role: Personal Injury Solicitor / Fee EarnerLocation: SheffieldWorking Pattern: Full-time | Office Based PreferredSalary: £30,000 - £45,000 DOE \n CRA Consulting are working with a well-established law firm on the outskirts of Sheffield who are looking to recruit an experienced Personal Injury Solicitor or Fee Earner to join their growing team. This is a great opportunity for someone with a solid claimant personal injury background who enjoys running their own caseload and wants to join a friendly, established practice where they can have plenty of autonomy. Why this opportunity stands out\n The firm can offer a stable working environment, competitive salary and the opportunity to take ownership of a varied personal injury caseload. \n\n • Salary of £30,000 - £45,000 depending on experience\n, • Established Sheffield law firm\n, • Predominantly Fast Track litigation caseload\n, • Good level of autonomy\n, • Competitive pension\n, • Additional employee benefits\n, • Accessible Sheffield location with good transport links\n, • Opportunity to develop within an established PI practice\nThe Role\n You will be responsible for managing your own claimant personal injury caseload, with the majority of matters involving Fast Track litigation. The role will include: \n\n • Managing personal injury claims from instruction through to settlement\n, • Handling litigated Fast Track matters\n, • Investigating liability, causation and quantum\n, • Reviewing medical evidence and valuing claims\n, • Drafting pleadings, witness statements and schedules of loss\n, • Negotiating with defendant insurers and solicitors\n, • Making and responding to Part 36 offers\n, • Ensuring compliance with court directions and limitation dates\n, • Providing a high standard of client care throughout the claim\n, • Progressing files proactively towards settlement or trial\nWhat we're looking for\n We're keen to speak with Solicitors, Chartered Legal Executives and experienced Personal Injury Fee Earners who have a good understanding of claimant personal injury litigation. Previous experience handling RTA and/or Employer's Liability and Public Liability claims would be particularly beneficial. You don't necessarily need to tick every box. The firm is primarily looking for someone with a good grounding in personal injury who is comfortable running files and understands the litigation process. The Package\n Salary is expected to be in the region of £30,000 - £45,000 depending on experience, alongside a good pension and wider benefits package. The firm would prefer someone who is happy to be based in the Sheffield office full-time, so this could particularly suit someone who enjoys being part of a team and prefers an office-based working environment. Why speak to CRA Consulting?\n The Sheffield personal injury market remains busy, but finding the right environment is just as important as finding the right salary. If you're currently handling Personal Injury, RTA, EL/PL or Fast Track litigation and would like to understand what else is available in the Sheffield market, I'd be very happy to have a confidential conversation. Contact Rob Addy at CRA Consulting on for further information.

FindCore are thrilled to be assisting an award-winning multidisciplinary engineering consultancy with the recruitment of a Geotechnical / Geo-environmental Engineer. \n Permanent position. This role will be based at the company’s Sheffield office, with travel to sites across Yorkshire and surrounding areas where required. \n This is a technical position with a clear pathway towards Technical Director / Director level. \n Salary \n Competitive salary, depending on experience + twice-yearly salary reviews + additional benefits \n Key Responsibilities \n\n • Lead geo-environmental, contaminated land and geotechnical projects from inception through to completion.\n, • Design, procure and supervise site investigations and remediation works.\n, • Interpret factual and interpretative ground investigation data.\n, • Prepare and review Phase 1 and Phase 2 reports, remediation strategies and verification reports.\n, • Undertake and review generic and detailed quantitative risk assessments.\n, • Manage project budgets, programmes and resources.\n, • Provide technical leadership and quality assurance across the team.\n, • Develop and maintain strong relationships with clients.\n, • Support business development, bids and tenders.\n, • Mentor and develop junior Engineers and Graduates.\n, • Ensure compliance with health, safety, environmental and quality standards.\n\n Skills & Experience \n\n • Degree in Geology, Geotechnical Engineering, Engineering Geology or a related discipline.\n, • Strong UK consultancy experience within geo-environmental engineering, contaminated land or geotechnical engineering.\n, • Good technical knowledge of UK contaminated land legislation and guidance.\n, • Experience managing multiple projects and supporting project teams.\n, • Strong report-writing and technical-review skills.\n, • Commercially aware with confident client-facing abilities.\n, • Experience mentoring or supporting junior professionals.\n, • Chartered status with the Geological Society, ICE or similar would be highly advantageous.\n, • Full UK driving licence.\n\n What’s on Offer \n\n • Competitive salary with twice-yearly salary reviews.\n, • Clear progression towards Technical Director / Director level.\n, • Flexible start and finish times.\n, • Early finish on Fridays.\n, • Ongoing CPD and professional-development support.\n, • Support towards professional accreditation and chartership.\n, • Paid study leave and funding for approved professional examinations.\n, • 4% contributory pension scheme.\n, • Life insurance of twice annual salary.\n, • Enhanced sick pay.\n, • Discounted health cash plan.\n, • Cycle to Work Scheme.\n, • Regular company social events.\n, • Opportunity to lead high-profile projects across residential, commercial, industrial, infrastructure and regeneration sectors.\n\n For further information on this opportunity, or any other jobs, please apply via the link below or contact FindCore in the strictest confidence.

Our client is seeking an experienced Operations Manager to oversee the efficient day-to-day operation of its Chesterfield and Sheffield offices. The role will lead office administration, facilities, suppliers, health and safety, budgets and business support across multiple locations. Key Responsibilities • Lead the day-to-day operation of the Chesterfield and Sheffield offices • Manage and develop the Business Support and Legal Support teams across both locations • Oversee office facilities, maintenance, security, equipment and workplace services • Manage suppliers, contractors, procurement and service contracts • Manage office budgets and expenditure, ensuring value for money • Oversee archiving, file retrieval and confidential document destruction across two off-site facilities • Lead new starter inductions and coordinate training and development activities • Oversee reception, hospitality, events and meeting arrangements • Ensure appropriate health and safety, risk management, data protection and business continuity procedures are maintained • Coordinate audits, workstation assessments, insurance and permit renewals and emergency arrangements • Act as the main point of contact for office-related matters, working with IT, HR, landlords and external suppliers • Lead workplace improvement initiatives and operational projects • Support effective workspace utilisation and continuous improvement Requirements • Previous experience as an Operations Manager, Office Manager or in a similar role • Experience managing office operations within a professional services environment • Multi-site line management experience • Strong organisational and project management skills • Experience managing budgets, procurement and supplier contracts • Good understanding of facilities management and health and safety • Excellent communication and interpersonal skills • Proficient in Microsoft Office • Ability to manage multiple priorities and deadlines • Professional, proactive and highly organised approach • Strong problem-solving, influencing and decision-making skills What's on Offer • 23 days' holiday plus bank holidays, service increments and discretionary days • Free parking on workdays • Free wills and generous discounted conveyancing • Healthcare cash plan • Death in service life cover • Company pension scheme Should you have any questions or wish to apply please do not hesitate to contact Clear Legal and Financial Recruitment. Please Note: Due to the number of applications we receive we may be unable to respond to every application directly. If you have not heard from us within 3 working days, please assume your application has been unsuccessful

FindCore are thrilled to be assisting an award-winning multidisciplinary engineering consultancy with the recruitment of a Structural Engineer. \n Permanent position. This role will be based at the company’s Sheffield office. \n The successful candidate will work across a varied portfolio of residential, commercial and industrial projects, working alongside experienced Civil and Structural Engineers. \n Salary \n Competitive salary, depending on experience + twice-yearly salary reviews + additional benefits \n Key Responsibilities \n\n • Assist with the structural design of steel, concrete, portal frame and traditional building structures.\n, • Prepare and review structural calculations and technical drawings.\n, • Use structural design software to support engineering calculations.\n, • Work closely with CAD Technicians and other Engineers to develop project designs.\n, • Consider practical engineering, buildability and construction requirements throughout the design process.\n, • Prepare technical reports and project documentation.\n, • Coordinate with Civil, Geotechnical and other engineering disciplines.\n, • Attend project and client meetings where required.\n, • Support junior members of the engineering team as experience develops.\n\n Skills & Experience \n\n • Previous experience within structural or civil engineering design.\n, • Degree in Civil Engineering, Structural Engineering or a related discipline would be advantageous.\n, • Understanding of structural design principles and construction methods.\n, • Some experience designing in steel, concrete, timber or masonry would be beneficial.\n, • Knowledge of structural design software such as MasterSeries, SCIA or similar would be advantageous but is not essential.\n, • Ability to understand and work with engineering drawings.\n, • Good technical and problem-solving ability.\n, • Strong attention to detail and willingness to continue developing technically.\n, • Good communication skills and ability to work collaboratively within a design team.\n, • Chartered status is not required, although support towards ICE or IStructE chartership is available.\n\n What’s on Offer \n\n • Competitive salary with twice-yearly salary reviews.\n, • Structured training and professional development.\n, • Support towards ICE or IStructE chartership.\n, • Paid study leave and funding for approved professional examinations.\n, • Flexible start and finish times.\n, • Early finish on Fridays.\n, • 4% contributory pension scheme.\n, • Life insurance of twice annual salary.\n, • Enhanced sick pay.\n, • Discounted health cash plan.\n, • Cycle to Work Scheme.\n, • Regular company social events.\n, • Excellent long-term progression within an established engineering consultancy.\n\n For further information on this opportunity, or any other jobs, please apply via the link below or contact FindCore in the strictest confidence.

Mechanical Maintenance Engineer (Commercial Laundry) \n Sheffield \n £38,480 Basic + Regular Overtime (OTE £44,000+) + Company Phone + Excellent Benefits \n Permanent | PM Shift \n We are currently recruiting for a Mechanical Maintenance Engineer to join a long-established commercial laundry business based in Sheffield. \n This is an excellent opportunity to join a highly successful family-owned company that has been operating for over 130 years. With an annual turnover of £9-10 million, the business has built a reputation for quality, reliability and exceptional customer service. More importantly, they have built a loyal workforce by genuinely looking after their employees and providing long-term career stability. \n The company remains family-owned, with the owners actively involved in the business and committed to its future, offering a level of security and stability that is increasingly difficult to find. \n The Role \n Working as part of a close-knit engineering team of five, you will be responsible for maintaining, repairing and improving a wide range of commercial laundry machinery and equipment to ensure the smooth running of the operation. \n This role is ideally suited to a mechanically biased engineer who also possesses good electrical fault-finding skills. Formal electrical qualifications are not essential, but you should be comfortable working with electrical systems and diagnosing faults. \n Key Responsibilities \n\n • Carrying out planned preventative maintenance (PPM)\n, • Responding to equipment breakdowns and carrying out fault finding\n, • Mechanical repairs and component replacement\n, • Basic electrical diagnostics and troubleshooting\n, • Supporting machinery upgrades and continuous improvement projects\n, • Working closely with production teams to minimise downtime\n, • Maintaining high standards of health and safety\n\n Requirements \n\n • Previous maintenance engineering experience within manufacturing, production, laundry, FMCG or similar environments\n, • Strong mechanical maintenance skills\n, • Good electrical knowledge and fault-finding ability\n, • Positive attitude and willingness to learn\n, • Strong communication skills\n, • Reliable and dependable work ethic\n, • Ability to work independently and as part of a team\n\n Working Hours \n\n • Monday to Friday\n, • PM Shift: 2:30pm - 11:45pm\n, • 40 hours per week\n\n Please note: As part of this role, engineers are expected to work an additional 5 hours overtime on either a Saturday or Sunday on approximately 46 weekends per year. These hours are paid at time and a half and form part of the expected earnings package. \n There are also further overtime opportunities available for those wishing to increase their earnings. \n Salary & Benefits \n\n • Basic salary of £38,480 per annum\n, • Expected earnings of £44,000+ per annum including regular weekend overtime\n, • Additional overtime available\n, • Company mobile phone provided\n, • 27 days annual leave\n, • Christmas Eve, Christmas Day and New Year’s Day off\n, • Bank Holidays worked as part of the operation\n, • All PPE provided\n, • Potential company vehicle after 12-18 months\n, • Stable long-term employment with a respected family-owned business\n, • Supportive management team and excellent working environment\n\n If you are a mechanically biased engineer looking for a secure, long-term opportunity with a company that genuinely values its employees, we would love to hear from you. \n Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see Many Thanks

Senior Project Engineer – SI/ICAHello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water:We offer a competitive salary, depending on experience, 4a, 52,955 - 67,891A company car benefitAnnual incentive related bonus (1000 maximum bonus opportunity for the performance year)Attractive pension scheme (up to 12% company contribution) Development opportunities in line with the Senior Project Engineer progression plan25 days annual leave plus bank holidays – plus two extra wellness days! Life assurance cover of 4 times pensionable salary A great benefits package – choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover. Retail savings scheme Online GP service, cycle to work scheme, gym membership discounts and many more! Location: Hybrid working with regular travel to Yorkshire Water sites and offices.Work type: Permanent. 37 hours per week, Monday – Friday.We have an exciting opportunity for a Senior Project Engineer to join the Asset Delivery team at Yorkshire Water and be a part of helping Yorkshire Water to provide the best service to our customers. Could this be you? What we do: Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, it’s so much more than this. We look after communities, protect the environment, and plan to look after Yorkshire’s water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the region’s health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. Programme Delivery are a key part of how we plan to meet the changing expectations of customers and regulators. The Programme Delivery department is accountable for delivering the Capital Construction Programme. This is achieved by delivering intelligent Totex solutions, through collaboration, for sustainable out-performance. The Department is also accountable for commercial and contractual arrangements across the supply chain and to deliver leading and world class contract management processes. The purpose of the department is to achieve best value for money from our Capital Programme, by optimising our resources, monitoring and tracking the effectiveness and efficiency of our supply chain commercial arrangements, through; Reducing cycle time in the project delivery process; Maintaining, or enhance service; Embracing a collaborative approach through our supply chain; Working in a safe environment; Delivering out performance against targets identified in collaborative out performance plans. Specialist Projects is a stream within Programme Delivery led by Engineers from various disciplines. Undertaking the roles of Client, Principal Designer and Principal Contractor we manage the end to end design process and utilise a wide ranging supply chain to deliver engineering construction schemes across Clean Water, Waste Water and Networks. Where you fit in: As our Senior Project Engineer you will;Provide technical supervision and line management of a team of Project TechniciansTechnically manage and coordinate the design and safe delivery of engineered MEICA projects within the Specialist Projects portfolioEnsure that the delivery of all projects complies with the requirements of the CDM regulations undertaking the role of Principal Contractor and supporting the Client & Principal DesignerEnsure adherence to YW Engineering specification and associated documentationDrive excellent standards and performance in health and safety, risk management and control of work to ensure compliance with the YW safety PolicyEnsure that robust financial management and commercial awareness form the foundation of all business decisionsWhat skills & qualifications you will need: ICA based apprenticeship or Engineering degree or equivalent ONC/HNC/BTEC in ICA EngineeringUnderstands the principles of control of works – Permits, POWRA, RAMS etcUnderstands the major processes and the effects/role of MEICA equipment in thisHas a broad experience with electrical and ICA equipment and can use this experience to produce engineered solutions to resolve business risks and other issuesHas a thorough understanding and working knowledge of the CDM regulations and their practical applicationHas a good understanding of the design and project delivery process including hazard identification, risk assessment and site supervisionAbility to respond/answer to a wide range of specific technical and non-technical detailed queriesUnderstands and has experience of working to ATEX standardsApplies formal SI & ICA project development and delivery procedures – ie URS, SRS, P&IDs, FDS, FAT, SAT & O&MsDetailed knowledge and understanding of SI & ICA best practice and standardsExperience of optimising SI control systems in a complex ICA technology landscape.You will also benefit from having: Experience working in a regulated utility or major asset management / delivery with a wide-ranging asset basePrevious experience in a commercially orientated and or regulated environmentKnowledge of the application of SI, Automation and Instrumentation technologies in a water utility environment.Understands and applies BS7671, BSEN 61511, BSEN 13849 and BSEN 62061 and other relevant legislation / standardsKnowledge of Schneider PLC platform, Mitsubishi (IEC 61131) and Allen Bradley HMI/PLC systems and software and ‘iFix’ SCADA.Understand process safety activities and documentation ie; Engineering Risk Assessment/Safety Reviews, We embrace a flexible working model, where our hybrid setup typically requires an average of 1 to 2 days in the office per week and working on our operational sites. This could be slightly more when collaborative efforts, training or meeting deadlines demand it. For those who prefer to work on-site, our office is open Monday-Friday during working hours. If you’re an experienced Senior Project Engineer professional and want to help us deliver exceptional service for our customers whilst protecting the environment, then apply today to find out what a career with Yorkshire Water can offer for you. Accessibility We are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible.If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required.Just a heads-up! We might start interviewing and close the position earlier based on the response. To make sure you’re considered, please send in your application as soon as you can.If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance.All our roles are subject to a medical questionnaire, and further medicals when required.No agencies please

\n \n \n At Places for People, we hire People, not numbers! So, if you like the sound of one of our jobs, please apply - you could be just who we're looking for! Of course, experience and track record are important, but we're more interested in hiring someone that embodies our People Promises. That's someone that does the right thing, is enthusiastic and motivated to grow, believes in Community spirit, is respectful and enjoys their work. As the UK's leading Social Enterprise, we're dedicated to creating inclusive and thriving Communities for both our Customers and Employees. \n So, what are you waiting for? Join a Community that cares about you! \n More about your role \n You will take an active role to engage with residents to promote safe and secure independent living, ensuring an engaging vibrant environment to reduce isolation. Providing advice on rent and service charges, assisting with benefits claims and supporting customers with their financial needs. You will work with the internal Places for People income recovery team to reduce rent arrears. You will be assisting in compliance. \n Travel within local geographical areas will be required. \n This post is subject to a satisfactory enhanced disclosure from the Disclosure and Barring service. \n For more information, please download our job profile available on our website. \n More about you \n It is essential that you have experience/knowledge of housing management and wellbeing of Retirement/Extra Care living services. You will possess good computer skills with knowledge of all Microsoft Office applications, including Word, Excel and PowerPoint. \n Effective communication skills both written and verbal, with the ability to build great relationships with customers, partners and colleagues is required. It is important that you have a good mix of ‘team player' attributes but also the ability to work effectively using your own initiative; as there will, be an element of lone working. You will also have an awareness of Health & Safety. \n The ideal applicant will have experience of all aspects of housing management including manging anti-social behaviour and challenging situations. \n A driving license and own car for business use is preferred for this role. \n Commitment to Trauma Informed Practice \n At Places for People, we are committed to creating safe and supportive environments for individuals who have experienced trauma. We understand that trauma can have a profound impact on individuals, and we are dedicated to recognising the signs and symptoms of trauma, practicing empathy and respect, and using trauma-informed language. We are also committed to providing individuals with choice and autonomy, and to working collaboratively to empower them to re-establish control of their lives. \n Benefits \n We are a large diverse and ambitious business, which will give you all the challenge you could wish for. \n We know that there's always more we can do to make you smile, that's why we offer a comprehensive benefits package with each role, yours will include: \n \n • Competitive salary, with a salary review yearly \n \n \n, • Pension with matched contributions up to 7% \n \n \n, • Excellent holiday package – 35 days annual leave with the option to buy or sell leave \n \n \n, • Cashback plan for healthcare costs – up to £500 saving per year \n \n \n, • A bonus scheme for all colleagues at 2% \n \n \n, • Training and development \n \n \n, • Extra perks including huge discounts and offers from shops, cinemas and much more. \n \n \n \n \n \n What's next? \n If you meet the criteria and are ready to make the next step in your career then click apply. You will be redirected to our careers site where you can discover more about the role, read a full job description and apply directly to us. \n As part of our commitment to diversity and inclusion, we offer a guaranteed interview to candidates who are disabled, neurodiverse, or have served in the Armed Forces, provided they meet the essential criteria for the role. If you would like to be considered under this scheme, please indicate this in your application. We are dedicated to creating a supportive and accessible recruitment process for all. \n We are committed to creating an inclusive and accessible recruitment process. If you require any reasonable adjustments to support your application or interview experience, please let us know. We're happy to work with you to ensure you have the opportunity to perform at your best. \n If you are a Places for People customer and you're looking for support with your application, please contact our skills and employment team on skillsemployment@placesforpeople.co.uk. \n We understand the importance of a supportive and inclusive work culture so please talk to us at interview about flexibility you may need. We can't promise to give you exactly what you want, but we promise not to judge you for asking. For this role we are open to discussing the possibility of reduced hours, flexible start and finish times or compressed hours. \n \n If you are a recruitment agency please note we operate a PSL and do not take cold calls \n \n \n \n \n Safeguarding \n At Places for People, safeguarding is everyone's responsibility. We are committed to creating safe communities for our customers and colleagues by protecting children, young people, and adults at risk from harm, abuse, and neglect. \n We follow robust safeguarding policies and procedures, ensuring all employees, volunteers, and contractors uphold the highest standards of safeguarding and accountability. Our recruitment process includes pre-employment checks, including Disclosure and Barring Service (DBS) checks where applicable, to promote a safe and secure working environment. \n By joining Places for People, you are expected to contribute to our safeguarding culture, following our policies and reporting concerns to protect those in our communities \n \n \n \n \n

Produce, update and monitor content displayed across the centre's digital signage network. Raise requisitions for general supplies, goods and services, ensuring all associated paperwork is accurately reconciled. Strong computer literacy, including good working knowledge of Microsoft Office.

The Company \n Based in Sheffield, Bright Technologies Ltd – better known as BriTec – is a specialist manufacturer and distributor of shielded solutions for radiation protection. For decades, we have supplied hospitals, academia, and radioisotope producers with customised workstations and dispensers for handling radioactive material, as well as instruments for monitoring ionising radiation. \n We support those working in radiation environments by designing and manufacturing radiation protection solutions for the safe use of radioactive materials in diagnostic, therapeutic, and research applications. \n Our manufacturing workshop can produce goods to exacting specifications as outlined by our customers. We proudly serve professionals across the medical, veterinary, industrial, and research sectors, striving to be their partner of choice through standard and tailor-made solutions with a steadfast commitment to safety, quality and trust. \n \n The Role \n We are looking for a Product Design Engineer to join our existing design team in a full-time, office-based role. \n As a Product Design Engineer, you will work alongside other designers, engineers and project staff to design both standard and bespoke products for customers working in radiation environments. You will be part of a team that supports projects from initial enquiry through to design, manufacture, assembly and installation. \n You will work on a wide variety of projects, ranging from small, manufactured products through to larger custom installations. This will involve producing 3D models, detailed drawings, bills of materials, costings and supporting documentation. \n You will also work closely with the wider business, including sales, production, machining, fabrication, assembly, installation teams, suppliers and customers. The role requires good communication and teamwork, as designs often need input from multiple departments to make sure they are practical, accurate and suitable for manufacture. \n This is a hands-on design role suited to someone who enjoys problem solving, practical engineering and working as part of a team to see designs progress from concept through to manufacture. \n \n Responsibilities \n\n • Working as part of the design team to create 3D models and detailed manufacturing drawings using Autodesk Inventor such as part production and fabrication/assembly drawings.\n, • Designing standard and bespoke radiation shielding products based on customer requirements.\n, • Producing accurate bills of materials, costings and supporting documentation.\n, • Working with the Sales Manager and other team members to provide technical input for quotations and proposals.\n, • Liaising with customers to clarify requirements and ensure designs meet the intended use.\n, • Communicating and collaborating with the shopfloor to support machining, fabrication, welding, assembly and installation.\n, • Reviewing existing products and supporting design changes, product refinements and continuous improvement.\n, • Following internal procedures and working within the company’s ISO 9001 quality management system.\n, • Attending site visits across the UK and occasionally overseas when required.\n, • Managing multiple projects at the same time and adapting to changing priorities.\n\n \n Requirements \n \n Essential \n\n • A minimum of one year experience in CAD, product design or a similar engineering design role.\n, • A minimum of one year experience using Autodesk Inventor , specifically within the sheet metal environment.\n, • Good understanding of engineering drawings and manufacturing processes.\n, • Strong attention to detail.\n, • Good communication skills, with the ability to work independently and as part of a team.\n, • Practical awareness of machining, fabrication, welding, assembly and general workshop processes.\n, • A minimum of one year experience designing parts for manufacture, including sheet metal and laser-cut / folded components.\n, • Confidence working on multiple projects at the same time.\n, • A practical problem-solving approach.\n, • The ability to produce accurate documentation, drawings and bills of materials.\n, • A minimum of one year experience working within, or following, ISO 9001 quality management procedures.\n\n \n Desirable \n\n • A full UK driving licence, or are working towards obtaining one.\n, • Some knowledge of radiation shielding or radiation protection products.\n, • A background in engineering, manufacturing or a similar technical environment.\n, • Experience supporting customer quotations, site surveys, installations or customer-facing project work.\n, • Knowledge of materials such as lead, stainless steel, aluminium, plastics and tungsten.\n, • Experience using Sage accounting and Microsoft Office.\n\n \n What we offer \n\n • Career development and professional growth opportunities.\n, • Competitive salary.\n, • All bank holidays with 21 days holiday per year, and Christmas shutdown.\n

The Company \n At LabLogic Systems Ltd, we're pioneers in the Life Science, PET/Nuclear Medicine, and Radiation Safety sectors. We're committed to excellence, delivering high-quality products and service while fostering a positive work culture grounded in our core values: Passionate and driven, Everyone is accountable, Respectful and inclusive, Family atmosphere, Efficient, Customer-focused, and Trustworthy. Recently, the LabLogic Group was honoured with the prestigious King’s Award for Enterprise in International Trade and achieved the Investors In People Gold accreditation, affirming our commitment to creating an exceptional workplace. Join us in a collaborative, supportive team, where benefits like our annual Center Parcs trip promote positive working relationships. LabLogic Systems Ltd is not just a workplace; it's a rewarding journey in a globally acclaimed organisation. \n \n The Role \n \n We are seeking a Support Specialist to join our growing technical team. This is a customer-facing, hands-on role supporting the installation, configuration, validation and everyday use of LabLogic’s chromatography (Laura) and LIMS (PETra / SPECTra) platforms. As part of this role, you will work closely with pharmaceutical, PET radiopharmacy and research customers operating in highly regulated environments. \n \n We’re looking for someone who is passionate about their work, takes ownership and shows initiative. The ideal candidate consistently follows through on tasks, is proactive and resilient when facing challenges, and is motivated to continuously improve both themselves and the systems around them. \n \n This role is a full time, office-based position. The successful candidate must be in commutable distance to either our Bath Spa office (12 Charlotte St, Bath, BA1 2NE) or our Sheffield office (Innovation House, 6 Europa View, Sheffield, S9 1XH). This role will involve regular UK travel and occasional European and worldwide travel to customer sites. \n \n This position would be ideal for those with a technical application support background with experience supporting laboratory systems, or a laboratory scientist (with a HPLC/GC/chemistry background) who has a strong IT aptitude and an interest in software systems and instrumentation integration. \n \n Responsibilities \n \n\n • Provide helpdesk-based support via ticketing system, email and phone.\n, • Deliver remote troubleshooting for software and instrument integration issues.\n, • Install and configure LabLogic software and supporting systems (MS SQL Server, Windows Server etc.).\n, • Support integration with analytical instrumentation.\n, • Assist with instrument communication troubleshooting (RS232, USB, Ethernet, COM ports, driver configuration).\n, • Provide onsite installation support and customer training.\n, • Assist with database configuration, upgrades and system migrations.\n, • Develop and maintain technical documentation, help guides and FAQs.\n, • Support validation activities (IQ/OQ/PQ) within highly regulated environments.\n\n \n The above list is not exhaustive and, as such, you may be required to undertake other duties as appropriate. \n \n Requirements \n \n Essential \n\n • Strong troubleshooting and analytical skills.\n, • Ability to work well as part of a team and within an ISO 9001 Quality environment.\n, • Experience with Hardware and Software support.\n, • Ability to manage own workload and prioritise calls.\n, • Good communication skills (written, phone and in person).\n, • Excellent IT skills (MSSQL/Oracle/Windows Server/Windows Desktop).\n\n \n Desirable \n\n • Experience within a laboratory environment and/or software development environment.\n, • Experience integrating instruments via serial/USB/Ethernet connections.\n, • Knowledge of Oracle databases.\n, • Understanding of GMP, GAMP or regulated software validation.\n, • Experience delivering customer training.\n, • Full UK driving licence.\n\n \n What we offer \n \n\n • Career development and professional growth opportunities.\n, • Competitive salary.\n, • You will receive all bank holidays plus 24 days holiday per year (increasing over service) + additional day off over Christmas.\n, • UK team building weekend at Center Parcs for employees and their families to attend.\n, • Private medical insurance with BUPA.\n, • Scottish Widows pension scheme.\n, • Death in service policy.\n, • Cycle to work scheme.\n, • Access to gym facilities.\n

Production Controller – Sheffield - Competitive Salary \n Elevation Recruitment Group is proud to be working in partnership with Radius Aerospace in Sheffield, a globally recognised manufacturer supplying precision-engineered components and assemblies to the aerospace and defence industries. \n With a reputation for quality, innovation and investment in advanced manufacturing technology, Radius Aerospace supports some of the world's leading aircraft and defence programmes. \n Due to continued growth and increasing customer demand, they are currently seeking an experienced Production Controller to join their team. \n \n Working Hours / Benefits \n\n • 185 hours annual leave, with the option to buy or sell up to 37 hours each year\n, • Paid Christmas shutdown\n, • 37-hour working week, early finish on Fridays, and a four-day week for night shift workers\n, • Bank Holidays included\n, • YuLife app, including 24/7 GP access and rewards for healthy activities\n, • Bravo Benefits, including discounts on shopping and gym memberships\n, • Salary sacrifice schemes for electric/hybrid cars and critical illness cover\n, • Westfield Health Scheme\n, • Free on-site parking\n\n \n The Role \n As Production Controller, you will be the driving force behind the smooth running of product and materials through the business, keeping the Master Production Schedule on track. Working closely with Cell Leaders and team members, you will: \n\n • Actively drive parts through your area of responsibility, running expedite and work-to-list reports and liaising with planners and stores to keep WIP moving\n, • Maintain production boards on a live basis and present daily production meetings, understanding and executing the MPS plan\n, • Propose priority requirements ahead of the daily walk round and support it in person\n, • Coordinate with other business units and cell leaders to expedite parts across the factory, including stock takes and inventory counts as required\n, • Attend daily Hotspot reviews and complete daily handovers, highlighting product status, priorities and areas of concern\n, • Support the Business Unit Manager with customer update data and contribute to continuous improvement of working methods\n\n \n The Person \n\n • Previous experience within aerospace (essential)\n, • Experience of working to production targets (essential)\n, • Confident decision-maker with good communication and coordination skills\n, • Positive, energetic and self-motivated, with a genuine can-do attitude\n, • Good computer literacy, including MS Office\n\n \n About Elevation \n Elevation Recruitment Group is a specialist recruitment consultancy that helps people build long-term, successful careers. We work across a wide range of industries and disciplines with a focus on making recruitment feel more human, more honest and more effective. We are specialists in every function and experts in every hire. Check out our website to find out more.

Build Manager About the Role We are looking for an experienced Build Manager to oversee the construction element of our home improvement projects, predominantly conservatories, single-storey extensions and associated building works. This is a hands-on role covering site management, technical surveying, quality control, compliance and subcontractor management, ensuring projects are completed safely, correctly and to the required standard. Key Responsibilities Manage and monitor construction works from commencement through to completion. Carry out site inspections to monitor progress, workmanship, Health & Safety and compliance. Conduct additional inspections on complex, high-value and new-build-team projects. Ensure completed works meet required quality standards before installation progresses. Manage and support a network of subcontract build teams. Set and maintain clear workmanship, quality and performance standards. Address subcontractor performance, quality and compliance issues. Review surveys, drawings and proposed designs to identify potential issues before work begins. Provide practical construction solutions that meet customer, technical and regulatory requirements. Ensure works comply with Planning requirements, Planning conditions and Building Regulations. Liaise with Building Control and other relevant parties when required. Provide practical solutions to problems arising during live projects. Make informed decisions on site to keep projects progressing and minimise unnecessary costs. Escalate significant technical, quality or cost issues appropriately. Assist with identifying, interviewing and assessing potential subcontract build teams. Support the onboarding and development of new build teams. Monitor new teams during their initial projects and provide feedback and guidance. Provide technical construction advice to surveyors, installers, office teams and subcontractors. Act as a technical point of contact for building and construction queries. Support the resolution of technical issues before and during projects. Candidate Requirements Strong practical construction knowledge and hands-on site experience. Experience with conservatories, single-storey extensions and domestic building projects. Experience managing builders and subcontract construction teams. Technical surveying and site inspection experience. Good understanding of Planning, Building Regulations, Health & Safety and CDM. Ability to read and assess technical drawings and construction details. Excellent communication and people-management skills. Good IT skills, including Microsoft Office. * Full UK driving licence and willingness to travel to sites. The role would suit someone from a construction management, technical surveying, site management, conservatory or extension background who is comfortable working on site and dealing directly with customers, subcontractors and internal teams

Due to continued business growth, we are looking to recruit a number of experienced Design Engineers to join a leading business in the Sheffield area. This is a full time permanent opportunity with an industry leader in their field. We are looking for candidates with minimum 7 – 10 years experience in industry looking for their next move – whether it be Senior Mechanical, Lead Mechanical or Principal Mechanical Engineer – there is a position for you based on your experience. The role will involve design and development of components used in a range of sectors including Nuclear, Defence, Rail, Oil and Gas and Subsea applications. You responsible for delivering high-quality engineering design, analysis, and documentation for projects with design-based scopes of work. The role involves contributing to all stages of the engineering lifecycle—from concept development through detailed design and implementation—while ensuring compliance with applicable standards and best practice Candidates will ideally be degree level in a relevant Mechanical engineering discipline however those with demonstrable experience who are HNC/ HND qualified will also be considered. Engineers with CEng/ Chartered status would be also be highly advantageous Candidates will also ideally have a demonstrable background in design and development of larger fabricated/ machined components products. Experience with Autodesk Inventor is ideal. Hours – Mon – Thurs 8 – 4.30 Mon – Thurs /8 – 2 Friday RESPONSIBILITIES Participate actively in project planning, scope definition, and engineering execution strategy. Organise and prioritise own workload, and meet planned deadlines Contribute to and, where appropriate, lead engineering design review meetings, ensuring the technical integrity of all outputs. Coordinate with multidisciplinary teams to integrate mechanical designs within broader project objectives. Produce and verify a range of engineering deliverables, including but not limited to: Detailed design drawings and general arrangement drawings (2D and 3D). Engineering calculations supporting design decisions and compliance verification. Computer-based analyses such as Finite Element (FE) modelling, structural integrity assessments, and thermal or fluid simulations. Technical documentation, including risk assessments, bills of materials (BoMs), and material specifications. Engineering reports summarizing design intent, analytical outcomes, and design verifications. Review and verify the work of other engineers or designers using first principles, design standards, and appropriate codes of practice (Type A and Type B standards). Ensure designs meet safety, functionality, and cost-effectiveness requirements. Provide support and guidance to the Mechanical Engineers, Mechanical Designers, and Apprentices. HEALTH & SAFETY It is your responsibility to work in a safe manner to promote personal safety and the safety of others to prevent accidents occurring and report all near misses. Move materials safely and carefully using the correct mechanical lifting method. Use the appropriate PPE and ensure it is in good condition, replace when required. Follow the company’s Health & Safety Policy at all times. KNOWLEDGE & SKILLS Degree in Mechanical Engineering or a closely related discipline. Candidates holding an HNC/HND in a relevant field may be considered for Project Engineer roles, subject to the Engineering Director’s review to ensure sufficient theoretical and analytical competence. Minimum of 7 years of post-graduate industrial experience (for Senior Engineers) in a mechanical engineering or design-based environment. Proven ability to develop and deliver engineering solutions from initial requirements to fully detailed design. Demonstrable experience in the following areas: Application of engineering codes of practice and Type A/B standards. Use of engineering models and drawings to communicate design intent (software training available in the company’s preferred design suite). Verification and validation of design work, including peer reviews and calculations. Understanding of manufacturing processes such as planning, raw material preparation, plating, welding, machining, finishing, and assembly. Preparation of risk assessments and technical specifications. Strong analytical and problem-solving abilities with a sound grasp of engineering fundamentals. Competent in Microsoft Office applications (Word, Excel, PowerPoint, and Outlook). * Familiarity with CAD and FEA tools

Technical Engineer | Salary up to £35000 | Bonus | 32 days holiday | Description: An excellent opportunity for a motivated Technical Sales Engineer. The successful candidate/s will be responsible for and tasked with growing their customer account base and increasing sales within it, as well as having a proactive approach to generating new business customers. You will be expected to converse politely and efficiently with customers ensuring high expectations are met and will be responsible for taking a lead or enquiry through from point of sale to delivery. The Role: Monitor and respond to customer email enquiries Support and problem solve customer queries/challenges at every opportunity Build quotes and progress orders dependent on customer requirements Provide technical advice and make changes to technical drawings to suit customer requirements Maintain a high level of service and reliability throughout all customer contact Maintain and grow current customer relationships Proactively seek out new business opportunities and convert into orders Person: The ideal candidate will have good Maths and English skills, be computer literate with experience with the Microsoft Office Suite (Excel, Word & Outlook etc). CAD experience and the ability to read technical drawings is necessary Understanding of metal specifications would also be useful, together with any knowledge of our cutting methods and previous sales experience preferred Previous experience within Technical Sales Engineer role AutoCad knowledge What's on Offer: Ongoing training and development 25 days holiday, plus bank holidays Pension Scheme, matched contribution/salary sacrifice Free Parking Shillito Group is a specialist recruitment and executive search partner, working with ambitious businesses to secure high-impact talent across commercial and engineering markets. Our reputation is built on deep expertise, trusted relationships and delivering results that go beyond the brief

Project Engineer / Senior Field Service Engineer Overall Earnings £60,000 To £70,000 Basic Salary £50,000 To £60,000 Car (Hybrid of Electric) Or Car Allowance Bonus Circa 10% Overnight Payment £30 / £60 Overtime - Additional Hours Returned As Time Off in Lieu Holidays - 24 Days Rising to 31 Days Plus Bank Holidays Role involves travel with on average one night a week away from home The Role - Project Engineer / Senior Field Service Engineer You will be responsible for the following: Installation and commissioning of hardware, software and electrical components at customer sites Development of design documentation (including drawings) in accordance with customer requirements Configuration of application software, Windows operating system and associated PC hardware Co-ordinating with customers and sub-contractors to schedule project activities Your Background - Project Engineer / Senior Field Service Engineer To apply you should be able to demonstrate the following: Experience working in a field service engineer, commissioning engineer, control and instrumentation engineer or project engineer role Ex-forces engineers are welcomed to apply HNC or similar in relevant engineering discipline Excellent customer service skills Computer literate with a good working knowledge of Microsoft Office Full UK driving licence and willingness to travel and be DBS checked The Company - Project Engineer / Senior Field Service Engineer You will be joining a national team of engineers who take great pride in their work and who aim to build upon long term relationships with customers For those with the desire there are opportunities to progress your career into more technical specialist roles This vacancy is being advertised by TRS Consulting. The services advertised by TRS Consulting are those of an employment agency and / or an employment business

EJ Connect are a specialist Recruitment Agency, providing Permanent and Temporary staffing solutions to GP Surgeries for all clerical positions. Our Mission is to connect great organisations with even greater people. Medical Receptionist GP Surgery Sheffield Locum hours every month Immediate Start available The role of the Locum Medical Receptionist will be too: Greet all visitors in a professional and friendly manner Answer incoming phone calls, transferring calls or dealing with the callers’ request appropriately Register new patients in a timely manner, educating them on the practice booking options Identify and understand patient needs and requirements, through appropriate questioning Maintain high standards of patient confidentiality. Carry out all necessary general office duties Maintain a clean, tidy, effective working area at all times The suitable Locum Medical Receptionist will: Have previous work history in a similar fast paced environment Possess knowledge and experience of EMIS Demonstrate an outgoing, friendly personality with a desire to meet new people Have the ability to build rapport quickly and effectively Have the ability to stay calm under pressure and to be able to multi-task in a similar environment Demonstrate a willingness to adapt to the changing working practices of a busy medical environment Have good administrative, IT and keyboard skills The successful Locum Medical Receptionist will receive: £13.75ph Support and guidance from a friendly and professional team Generous Holiday allowance Free Parking Should you be interested in this role, please call (phone number removed)

Hoist Operator - Sheffield City Centre Location: Sheffield City Centre Rate: £20.00-£21.00 per hour Start: ASAP Duration: Ongoing PSR Solutions are currently recruiting for an experienced Hoist Operator to join a busy high-rise construction project in Sheffield City Centre. This is an excellent opportunity to secure ongoing work with a reputable contractor on a major development. The Role Operating the site hoist safely and efficiently Transporting personnel and materials around site Carrying out daily safety checks Working closely with site management and operatives Following all site health and safety procedures Requirements Valid CPCS or NPORS Hoist Operator card Previous experience operating a hoist on construction sites Good understanding of health and safety regulations Reliable with a strong work ethic What's on Offer £20.00-£21.00 per hour Ongoing work Immediate start available Opportunity to work on a high-rise project in Sheffield City CentreIf you are interested and available to start immediately, please apply with your CV or contact the Sheffield office at PSR Solutions for more information

One of the UK's leading Property Consultancies is looking to recruit a Senior Project Manager to join their expanding office in Sheffield. THE COMPANY The client is one of the leading Consultancies in the region with over ten established offices across the UK. They work across all sectors within projects covering Education, Residential, Leisure, Health and Commercial. They have an outstanding reputation and strong track record of developing their employees to Director level positions. THE POSITION The positon is for a Project Manager at senior level to get involved in taking full responsibility of a number of projects from pre contract to final account. The successful Project Manager will be given the opportunity to take full client ownership and manage the project through to completion. At senior level the successful candidate will also be given the opportunity to get involved in business and client development and represent the company at various networking events and meetings. THE CANDIDATE The successful Senior Project Manager must: • Have a relevant degree • Have experience working as a Project Manager on either the Client, Contractor or Consultancy side • Have experience working on projects within Property • Have good communication and client facing skills WHY YOU SHOULD APPLY • Excellent reputation in the market as being a good employer • Opportunity to take a leadership role on a number of projects with blue chip clients • Fantastic opportunity to progress to Associate level and beyond INTERESTED? Apply in confidence to this advert or contact Tom Evans on (phone number removed) for more information

Senior Project Manager - Automation Are you an experienced project manager with a background in control and automation systems? Do you enjoy managing projects from initial client engagement right through to delivery? Fancy taking the lead on build-to-print control panel and major hardware projects? What's in it for you? -Competitive basic salary -25 days annual leave plus 8 bank holidays, with the option to buy or sell up to 5 days per year -4.5% employer contributory pension -Employee Health Cash Plan -Life assurance -Annual salary review every January -Hybrid working from Sheffield What will you be doing? -Leading build-to-print control panel and major hardware projects, from initial client engagement through to delivery -Developing project plans, timelines and resource allocation, and monitoring progress against them -Managing project budgets, tracking costs and identifying efficiency savings -Acting as the main point of contact for clients, managing expectations and communication throughout -Coordinating with procurement, production and quality teams to keep materials, resources and standards on track -Leading project meetings, from kick-offs to progress reviews, and reporting to stakeholders -Maintaining project documentation and supporting quality audits Where you'll be doing it Based in Sheffield, our client has over 50 years' history combining the skills, experience and knowledge of well-respected industry names to become a leading partner for industry. They develop and integrate digital transformation solutions across the energy, nuclear and industrial manufacturing sectors, helping to advance safe, secure and sustainable operations. With locations across the UK, Europe and North America, they work closely with clients to solve problems and deliver real value. What you'll need -A degree in science or engineering -Proven project management and team leadership experience -Experience delivering a structured project lifecycle as a Level 5 Engineer or Level 4 Project Manager (or equivalent), typically 2-3 years -Good knowledge of Microsoft Office, including MS Project, Word, Excel, PowerPoint and Visio -Strong commercial, financial and contract management skills, including NEC contracts -Experience producing formal technical documentation across the full project lifecycle -A good understanding of Quality Management System procedures, with experience supporting quality audits -A full UK driving licence Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

London (E1) or Sheffield City Centre or Lincoln City Centre | Hybrid - 3 days in the office, 2 days from home We'll build the full SDR team around the successful hire, so the location is genuinely flexible between our three office hubs. The opportunity Goodlord's mission is to become the gold standard platform for renting and we're looking for an SDR Lead to build our Sales Development function from the ground up. Reporting directly to the Head of Sales, this is a true 'blank canvas' role with no pre-existing playbook. You will architect the strategy, source the tools, and hire a brand-new early careers team who will be the future of commercial talent at Goodlord! Build the SDR function from the ground up, creating the strategy, playbook, processes and team rather than inheriting someone else's. Experiment with tooling, automation and AI to help the team work smarter, generate better conversations and create more pipeline. Balance both Enterprise and Mid-Market outbound motions, helping us figure out what great looks like across different customer segments. Play a key role in shaping one of Goodlord's most important growth functions, with the freedom to test ideas, move quickly and make a genuine impact. What we need from you: The most important part of this role is coaching, mentorship and leadership. We need a leader who genuinely loves nurturing raw talent e.g. graduates, school & college and transforming them into high-performing commercial professionals. Essential Early-Careers Coaching: A proven track record of managing, mentoring, and developing inexperienced hires, building their confidence and core commercial skills. B2B SaaS SDR Experience: Significant experience within a B2B SaaS sales development environment, including time spent as a Team Lead, Senior SDR, or Player-Coach. A Builder Mindset: Comfortable with ambiguity and highly motivated to create order, strategies, and playbooks where none exist. Tech-Savvy Outlook: Deep familiarity with tools like Salesforce/HubSpot and Outreach/Salesloft, paired with a genuine enthusiasm for AI sales automation Note: Whilst you won't carry an individual quota, this isn't a role for someone who wants to manage from the sidelines. We need a leader who is happy to demonstrate what good looks like and help a brand-new team develop into high-performing SDRs. It would also be great if you have: Prior experience navigating the fast-paced environment of a rapidly evolving scale-up. An awareness or understanding of the PropTech sector. Why you'll love being a Goodlordian Aside from the role, the people, our culture and our mission, we have some other things that make Goodlord a pretty awesome place to be. Here’s a few favourites amongst Goodlordians (check out our careers page for more info). Grow with Goodlord: your development is important to us, that’s why we are Great Place to Work - certified. Have a goal in mind? Share it with us so we can use some of our annual development fund to support it. We guarantee you’ll learn loads and develop both personally and professionally! Your well-being matters: bi-weekly coaching with Sanctus to provide Goodlordians with a safe place to talk and support your mental health 25 days holiday (plus UK Bank holidays) plus 1 day per full holiday year up to 32 days: We believe regular breaks are essential for well-being and we encourage (some may say expect!) all Goodlordians to take full advantage of their annual leave entitlement. Supporting your family: we offer Goodlordians of all genders a generous 3 months of fully-paid time off to look after their new arrivals * Our team: we’re an energetic, sociable, and talented bunch who are super passionate about what we do and determined to make a difference. We’re all in it together, we learn from each other, we’re genuine and we don’t have time for politics What’s next? If you’re ready to help us on our mission to be the gold standard platform for renting, then click apply (2-3 minutes)! A full job spec is available on request. Goodlord wants applicants from all backgrounds and walks of life. We are an equal opportunity employer committed to creating an inclusive environment where people can do their best work. If there is anything you need to participate fully in the interview process, we’d love to hear about that - please just include it in your application. Come and join us! Please note, as we are regulated by the Financial Conduct Authority, all Goodlordians are required to pass a thorough referencing check via Experian before joining the team. We will only ask for references at the point of making an offer. Regrettably we are not able to provide sponsorship for this role. No agencies please - we have tried and trusted partners we would turn to should we require support

Our client is a well-established engineering business supplying the UK rail industry. They're successful, growing, and have built an excellent reputation over the last 20+ years. They're now looking for a Customer Account Manager to join their close-knit commercial team. It's a genuine opportunity to build a long-term career, with a clear pathway into a Sales Manager position as the business continues to grow. If you're ambitious and looking for a company that promotes from within, this could be exactly what you're looking for. The Role This is an office-based role managing a portfolio of existing customers. You'll focus on building strong relationships, responding to enquiries, preparing quotations and delivering excellent customer service. You'll become the go-to contact for your customers while learning a specialist product range, with full training provided. What You'll Be Doing Looking after around 20 established customer accounts. Handling customer enquiries from start to finish. Preparing quotations and checking stock availability. Building strong, long-term customer relationships. Visiting customers across the UK when needed (occasional overnight stays). Attending exhibitions and industry events. Working closely with the Procurement team. Developing knowledge of the company's specialist products. About You You'll enjoy working with people and building relationships. You'll probably have experience in one of the following: Account Management Internal Sales Customer Service Sales Support Commercial Administration Technical or Engineering Support You'll also have: Great communication skills. Good attention to detail. Confidence speaking with customers. Ambition to develop your career. A full UK driving licence. Industry experience isn't essential. If you've got the right attitude and enjoy looking after customers, full product training will be provided. What's on Offer? Salary dependant on experience 10% performance bonus Monday-Thursday: 8:30am - 4:30pm Friday: 9:00am - 3:00pm Christmas shutdown Car allowance and mileage paid All travel expenses covered Full training and ongoing development Genuine progression into a Sales Manager role UK travel, with international opportunities in the future Ready for Your Next Step? If you're looking for a role where you can build lasting customer relationships, develop your career and work for a business that genuinely invests in its people, we'd love to hear from you