Trabajos Engineering en WokinghamCrear alertas

Job Title: Human Factors Integration Manager (Edgewing) Location: Reading area. The role could be contracted to any BAE Systems site (preferably Frimley) but on commencement will immediately be assigned to our Edgewing JV in the Reading area. A financial support package may be available to enable this assignment if required, dependent on certain criteria being met. Due to the nature of this assignment, we envisage there will be a need for mostly on site working, however, flexible working arrangements may be possible – please speak to your recruiter about the options for this role. We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role Salary: £75,000+ (DOE) complimented by a competitive benefits package including car allowance, annual bonus, and additional perks. Who we are: Join BAE Systems and you’ll be part of something bigger. As a valued member of our global colleague network, you’ll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You’ll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there’s no limit to where a career at BAE Systems could take you. Role Description: This role focuses on managing and supporting the Human Factors (HF) Integration Management System across all key product areas, including the Edgewing core platform, cockpit integration, and TLS HF. It involves working closely with Human Factors product leads, such as the Cockpit Integration Lead and TLS Training HFI Lead, to make sure HF is smoothly integrated and aligned with program goals. The role also includes leading and mentoring the team, helping team members grow while driving high standards and consistency in HF integration across multiple products and initiatives.. Core duties: • You’ll tailor and develop HF approaches to meet project priorities, balancing time, cost, and available resources effectively, • You’ll lead Human Factors (HF) integration across the full lifecycle, from concept through to in-service support managing a team of human factors engineers, • Perform analysis of Human Factor integration of design artifacts, • You’ll give technical governance and assurance of Human Factor activities across GCAP including Edgewing partner companies and suppliers, • You’ll interface with customers, partners, and regulators, participating in forums such as HFI Working Groups and Requirements Working Groups in an international environment Essential Skills: • You’ll draw on your experience to be able to apply this in the defence and/or aviation sectors to ensure best practices and compliance (highly regulated industries), • You’ll hold at least a bachelor’s degree, or demonstrate equivalent knowledge, in a relevant human science or Human Factors discipline, • You’ll have or be working towards chartership or senior/full/accredited membership with a professional body such as CIEHF, SIE, or JES, or possess equivalent knowledge and experience The Edgewing Team: By joining Edgewing, you will have a unique opportunity to help shape the company from the ground up — setting the foundations for generations to come, influencing how we work, and helping us build something world-class together. At Edgewing, we’re united by a shared purpose to drive what’s next in defence – uniting UK, Italian, and Japanese expertise to shape the future of global defence. With trust at the heart of everything we do, we empower our people to dare to go beyond, bring their best as one, and leave a mark that matters on a truly global mission, making a lasting impact through work that truly matters. Why BAE Systems? Here you’ll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You’ll be recognised for your contribution and enjoy rewards tailored to what’s most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a good sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We’re committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 14th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-JE1 #LI-Hybrid

We are recruiting for an Audio-Visual Installation Engineer for a growing Wokingham based company. \n Based out of Wokingham, Berkshire the ideal candidate will have an adaptable, flexible can-do attitude, outstanding client facing skills and the willingness to travel. \n Training can be provided for the right person as long as you are happy with a power tool, hanging 65" screens etc! \n The salary for this role is £26,500 working 37.5 hours a week but there is plenty of overtime available to earn more money. \n Must have a driving license as this role is 50/50 warehouse and site based. Travel is in a company vehicle and is mainly around the local/London area. \n Main responsibilities for the AV Installation Engineer are: \n\n • Support the sales in providing working solutions and ensuring that equipment is complete and functional.\n, • Liaise with customers to understand their needs and requirements.\n, • Provide onsite support of equipment during customer events.\n, • Support all other internal engineering departments.\n, • Preparation and installation of a wide range of AV solutions. The scope of work can range from single items of equipment to large scale event rollouts.\n\n \n Skills required for the AV Installation Engineer are: \n\n • Experience as an AV Installation Engineer preferred but not essential\n, • Be capable of wall mounting Large Format screens which means being confident and competent in the use of handheld power tools.\n, • Be able to install free standing screens and video walls\n, • Have capability to install and support small PA systems\n, • Understand and be able to put together a video conferencing setup of screens and cameras.\n, • Have adequate IT skills to be able to install, run and control video content.\n, • Be an outstanding team player, working well with others; someone who is not insular to his trade but willing to learn and help others learn a constantly changing variation of equipment.\n, • Excellent communication skills, with the ability to communicate professionally and effectively at all levels, both written and verbally.\n, • Ability and willingness to travel\n, • Have a flexible, adaptable approach in terms of working hours.\n, • A full clean driving licence\n\n

We are recruiting for a fantastic Maintenance Engineer to support the smooth running of building and facilities operations for an amazing company based in central Bracknell. The Maintenance Engineer is an important part of the team and is responsible for performing a wide variety of skilled repairs across mechanical, electrical, HVAC and plumbing facilities, machinery and equipment for a fantastic organisation and site. The position is Monday to Friday, onsite working 40 hours per week. There is also occasional availability/flexibility required for any adhoc overtime projects and also there is a 1 in 3 week on call rota with additional pay for these times. Salary is up to £40K + additional overtime and on call pay as well as a fantastic pension and overall impressive benefits package!!!Daily responsibilities\n\n • Adhere to established Health & safety policies and procedures.\n, • Maintain an up-to-date knowledge of safety procedures and when necessary assist in safety training activities as required.\n, • Carry out and contribute to the planned preventative maintenance schedule (PPM) on systems, equipment and general facilities in assigned areas.\n, • Assure that all required documentation is completed accurately and efficiently for all requests and PPM requirements.\n, • Carry out repairs/modifications on existing equipment/systems or install new systems/equipment as necessary.\n, • Order or initiate ordering of parts, components, assemblies and general materials needed to complete assignments.\n, • Carry out mechanical/general building system equipment repairs and services in response to service requests.\n, • Ensure the site is aesthetically presentable; clean buildings, functional lighting, roads/sidewalks clear, etc.\n, • Ensure any reactive or urgent problems are reported and resolved in a timely manner in accordance with company SLA's\nRequirements\n\n, • Hold a demonstrable understanding of electrical, mechanical, plumbing and technical aspects of building maintenance with relevant experience to support this.\n, • Exposure to working within a commercial environment\n, • Skilled in problem solving/troubleshooting. \n, • Relevant Qualification held within electrical, plumbing or mechanical sectors.\n, • A great attitude as well as taking pride in your work.\n If this sounds like a perfect opportunity for you, then do reach out to discuss or apply now!!!!

Business Development Manager (Engineering)\n £45,000 + ( OTE £55,000 - £65,000 )+ BenefitsLocation - Bracknell (Commutable from Reading, Wokingham, Slough, Maidenhead, Windsor, Camberley, Guildford & surrounding areas) \n Are you an experienced Business Development Manager with a background in Engineering looking to join a growing and successful organisation? \n Do you enjoy developing new business opportunities, building strong client relationships, and delivering tailored solutions to customers across the commercial building services sector? \n Are you looking for a role where you can take ownership of your region, grow key accounts, and play a key part in the continued success of an expanding business? \n This is an exciting opportunity to join a well-established organisation where you'll be responsible for driving revenue growth, developing new customer relationships, and managing existing accounts across the HVAC and Building Services market. You'll work closely with contractors, consultants, facilities teams and end users, providing a consultative approach to sales and helping customers find the right solutions for their requirements. \n On offer is the chance to join a forward-thinking business that values its people, rewards success, and provides ongoing training and development opportunities. You'll become part of a supportive commercial team with the autonomy to develop relationships, generate opportunities and make a real impact on business growth. \n This role would suit someone with previous Business Development, Account Management, Sales, or Key Account experience within the HVAC, M&E, Building Services, or technical solutions sectors who enjoys building long-term customer relationships and driving commercial success. The Role\n\n • Develop new business opportunities and generate sales growth across the HVAC and Building Services market.\n, • Manage and grow existing customer accounts, building long-term relationships with key stakeholders.\n, • Identify project opportunities and work with contractors, consultants, facilities managers and end users.\n, • Provide a consultative sales approach, understanding customer needs and delivering tailored solutions.\n, • Attend client meetings, networking events, exhibitions and industry forums to represent the business.\n, • Maintain accurate CRM records, manage sales pipelines and report on commercial opportunities.\nThe Person\n\n, • Previous experience in a Business Development Manager, Account Manager, Sales Manager, or similar commercial role.\n, • Experience within Engineering or technical industry.\n, • Strong track record of developing relationships and winning new business.\n, • Confident communicator with excellent negotiation and presentation skills.\n, • Commercially driven with a proactive approach to identifying opportunities.\n, • Strong organisational skills with the ability to manage multiple accounts and priorities.\n, • Full UK driving licence.\n\n BBBH276995 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Tom at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Field Service Engineer \n Job Type: Permanent \n Location: Reading, Berkshire, Basingstoke, Hampshire, Oxford, Oxfordshire, Swindon, Wiltshire \n Post Code: RG40 2AF \n Salary: £50,000 + Car / Van \n Start Date: ASAP \n We are seeking a dedicated and technically skilled Field Service Engineer to join our dynamic team. In this role, you will be responsible for installing, maintaining, troubleshooting, and repairing co... \n \n ZIPC1_UKTJ

Arden White Aerospace and Aviation Recruitment are currently working with a leading Aviation company based near Wokingham in Surrey to recruit aTechnical Service Engineer.\n \n \n The Technical Service Engineer is responsible for Engineering, Warranty Management, Consultancy, Sourcing, Guarantee Management and other value stream activities.\n \n This is a great start for a graduate in Aerospace Engineering to ...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

About The Role\n \nRight across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career; with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in afriendly, fun and respectful environment where you are encouraged to thr...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Electrical Systems Design Engineer (Contract) Location: Sandhurst (Hybrid – up to 3 days in the office)Rate: £45–£50 per hour (Outside IR35)Start: ASAP (latest start by the end of August)We are currently looking for an experienced Electrical Systems Design Engineer to join a busy engineering team on a contract basis.This is an excellent opportunity to work on a variety of control systems projects within the water industry , delivering electrical designs, retrofit solutions and supporting the delivery of automation systems. The role is primarily based from a new office in Sandhurst with occasional travel to sites across the South East for surveying purposes.Key Responsibilities Design control system solutions including PLCs, SCADA/HMI, telemetry and industrial networks.Design and retrofit electrical control panels.Produce electrical drawings, network architecture drawings and general arrangement drawings using EPLAN .Prepare and configure system design documentation.Assist in the production of Functional Design Specifications (FDS) and System Design Specifications (SDS).Identify electrical equipment and instrumentation requirements and support procurement scheduling.Carry out and manage occasional site surveys.Modify and update existing electrical drawings where required.Requirements Previous experience as an Electrical Systems Design Engineer or in a similar controls engineering role.Previous experience working within the water industry is essential.Strong knowledge of EPLAN is essential.Ability to read, interpret and modify electrical drawings.Experience designing control systems incorporating PLCs, SCADA/HMI and industrial networks.Strong attention to detail and a methodical approach to design.Excellent communication and problem-solving skills.Full UK driving licence and willingness to undertake occasional site surveys across the South East.Contract Details £45–£50 per hourOutside IR35Hybrid working available (up to 3 days in the office)Monday to FridayImmediate start available, with flexibility for candidates able to start by the end of August.To be considered for this role please either hit the 'Apply' button on this site or email your CV directly I can also be contacted directly on.I look forward to hearing from you!You must be eligible to live and work within the UK. Sponsorship is not provided.Ganymede is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientationTPBN1_UKTJ

We are looking to recruit a Project Engineer to support a major capital project involving the introduction of a new production line within a regulated medical manufacturing environment.This position will be joining our thriving UK medical device manufacturing company to work within our Site Services Department. The successful candidate will play a key role in the technical delivery of the new production line, ensuring equipment and systems are specified, installed, commissioned, and validated in accordance with regulatory requirements, quality standards, and project timelines.The role provides exposure to suppliers, manufacturing equipment, and cross-functional collaboration across engineering, quality, and operations teams.Essential Experience/Qualifications \n\n • Experience in engineering roles supporting capital equipment or production line projects\n, • Experience with equipment specification, installation, and commissioning\n, • Experience working in a regulated manufacturing environment\n, • Strong technical problem-solving skills\n, • Good cross-functional communication skills\n, • Familiarity with project management tools and methodologies\n, • Basic CAD capability for 2D drawings\nDesirable Experience/Qualifications\n\n, • Experience in medical device or pharmaceutical manufacturing\n, • A degree in Engineering (Mechanical, Electrical, Automation, Manufacturing, or similar) or an equivalent level qualification\n, • Familiarity with validation processes\n, • Experience with automation, robotics, or complex production equipment\nKey Skills \n\n, • Excellent verbal and written communication skills\n, • Able to build good working relationships\n, • Able to work well under pressure and meet deadlines\n, • Able to multitask and prioritise workload\n, • Able to work independently as well as within a team\n, • Self-motivated\n, • Keen and willing to learn\n, • Have a can-do attitude with an enthusiastic approach to work\n, • I.T. Literate – Microsoft Office\n, • Methodical, organised and structured approach to work\n, • Excellent attention to detail\n, • Able to gather, evaluate, critically interpret and communicate information\n, • Able to work in a safe manner complying with Health and Safety Legislation\n, • Able to act in a fair and reasonable way\n, • High level of commitment\n, • Flexibility to to travel for site visits and Factory Acceptance Testing (including occasional overseas travel)\n, • Good levels of English speaking\n\n\n, • Comfortable working on-site during installation and commissioning\nHours of Work\n\n, • 30 Month Fixed Term Contract \n, • 40 hours per week\n, • Monday to Friday\n, • 08:00am – 16:30pm\nEqual OpportunitiesWe are committed to creating a diverse and inclusive workplace for all. We are an Equal Opportunities Employer and welcome applications from all individuals, regardless of age; disability; gender; gender reassignment; marital or civil partnership status; pregnancy and maternity; race; religion or belief; sexual orientation, or any other characteristic protected by law. We believe that diversity enriches our workplace and enhances our ability to deliver exceptional results. We assess all applications based on skills, qualifications, and experience, ensuring a fair and equitable recruitment process.No Agencies pleaseREF-230 276

Principal Electronics Engineer \n \n We are working with an established technology business developing sophisticated electronic and optoelectronic products for demanding applications. Due to continued growth, they are looking for an experienced Principal Electronics Engineer to join a small, highly technical Engineering and Production team based in Wokingham. \n \n This is a hands-on position suited to an experienced electronics engineer who enjoys taking ownership of technically challenging projects, from initial concept and system architecture through to design, prototyping, verification, production and continuous improvement. \n \n As a Principal Electronics Engineer, you will work closely with the Engineering Manager, internal production teams, external consultants and contract manufacturers, providing technical leadership across new product development while also supporting and improving existing designs. \n \n The Role \n As the Principal Electronics Engineer, you will: \n\n • Lead electronics activities across new product design and development projects, from initial concept through to production.\n, • Take technical ownership of system and electronics architecture, schematic capture, circuit design, modelling, simulation and PCB development.\n, • Design and develop mixed-signal analogue and digital electronics, with a strong emphasis on small-signal analogue design.\n, • Work on the development of sophisticated optoelectronic, sensing, detection and measurement technologies.\n, • Design, prototype and test electronic assemblies and PCBAs.\n, • Support the testing, calibration and verification of existing products and electronic sub-assemblies.\n, • Troubleshoot, modify and improve legacy electronic designs.\n, • Provide technical support to Production teams and external contract manufacturing partners.\n, • Work with external PCBA consultants and PCB designers, providing technical direction where required.\n, • Lead functional and quality assurance testing and support regulatory certification activities, including CE, LVD and RoHS.\n, • Maintain electrical and functional test specifications across a portfolio of 30+ designs.\n, • Support design for manufacture and design for test activities.\n, • Lead continuous improvement, concessions and component obsolescence management.\n, • Work independently as a technical lead whilst collaborating effectively within a multidisciplinary engineering environment.\n\n \n What We're Looking For \n We are looking for an experienced Principal Electronics Engineer with 10+ years' hands-on experience in electronics design, testing and low-volume manufacturing environments. \n You will ideally have: \n\n • A degree or equivalent qualification in Electronics Engineering or a related discipline.\n, • Strong experience in mixed-signal circuit design, including analogue and digital electronics.\n, • Significant experience with small-signal linear analogue design.\n, • Experience designing high-sensitivity receiver, detector or measurement circuits.\n, • Strong hands-on PCB design experience and familiarity with ECAD tools such as Altium, EAGLE, PADS or OrCAD.\n, • Experience with system architecture, schematic capture, PCB layout and engineering documentation.\n, • Practical experience using laboratory test equipment including oscilloscopes, function generators, bench power supplies and spectrum analysers.\n, • Experience with circuit simulation and mathematical modelling tools such as LTSpice, MathCad or Excel.\n, • Experience with microcontrollers, programmable devices and/or FPGA-based hardware.\n, • Knowledge of embedded controller hardware design.\n, • Experience with high-speed data conversion, clocks and timing circuitry.\n, • Knowledge of communication interfaces including UART, USB, TWI/I2C and RS485.\n, • Experience with power management and analogue/switched DC converters across approximately 3.3V–24V.\n, • A methodical and analytical approach to engineering and problem solving.\n, • Excellent attention to detail and strong communication skills.\n, • The ability to work autonomously and take ownership of technically complex projects.\n\n \n Desirable Experience \n Experience in one or more of the following areas would be highly advantageous: \n\n • Optoelectronics, including laser diode and photodetector circuits.\n, • Pulsed laser drivers, SLD/SLED light sources.\n, • APD and PIN photodiode receivers.\n, • VOAs and optical modulators, including AOMs/EOMs.\n, • RF and microwave receiver design.\n, • Small-signal linear analogue circuit design.\n, • Electronics operating in challenging noise environments.\n, • Sensors incorporating high-speed ADCs (10–100MS/s).\n, • Temperature control using TECs.\n, • EMC-conscious PCB layout and design.\n, • Phase Locked Loop (PLL) design.\n, • Frequency conversion and RF amplifiers.\n, • Photon-counting detectors.\n, • FPGA experience, particularly Intel/Altera.\n, • Embedded software development, particularly bare-metal Embedded C.\n, • VHDL.\n, • Control systems, particularly temperature control.\n, • Project leadership and technical team leadership.\n, • Managing and directing external subcontractors and PCB designers.\n, • Designing multi-module mains-powered equipment.\n\n \n Why Join? \n This is an excellent opportunity for a senior electronics professional to take genuine technical ownership within a small, specialist engineering environment. \n \n You will have the opportunity to work across the full product lifecycle, combining hands-on electronics design with technical leadership, product development, testing and manufacturing support. \n \n If you are an experienced Principal Electronics Engineer looking for a role where your technical expertise will have a direct impact on the development of sophisticated products, we would be keen to hear from you.

Senior Engineering Team Lead?? Hybrid(2 days in office) | PermanentWe're partnering with an established technology business undergoing a major platform transformation and looking to hire a Senior Engineering Team Lead to drive technical delivery, architecture, and team development.This is a hands-on leadership role where you'll split your time between building scalable software, setting technical direction, and helping engineers grow and succeed.What you'll be doing? Leading a product-focused engineering squad? Driving architecture, system design, and engineering best practice? Working closely with Product Managers to shape roadmaps and delivery? Remaining hands-on with development, code reviews, and complex technical challenges? Coaching and mentoring engineers through regular 1-1s and career development? Championing modern engineering practices, including AI-assisted development tools? Collaborating with wider engineering teams on platform-wide initiativesWhat we're looking for6+ years' experience building production softwarePrevious technical leadership experience within an engineering teamStrong backend development skills in C#/.NET (or Java, Kotlin, Go)Experience with React, Vue.js, or similar front-end frameworksStrong understanding of distributed systems and microservices architectureCloud experience (AWS preferred)CI/CD and modern software delivery experienceStrong communication and stakeholder management skillsPassion for mentoring and developing engineersNice to haveEnterprise systems or integration experiencePrevious people management responsibilitiesExperience with platform modernisation or transformation programmesExposure to ERP, CRM, or other business-critical platformsWhy join??? Major platform transformation programme?? Opportunity to influence architecture and engineering standards?? Blend of technical leadership and people management?? Strong investment in modern tooling and engineering practices?? Genuine opportunity to make an impact within a growing technology teamIf you're an experienced Engineer looking to step into a highly visible leadership role while staying close to the technology, we'd love to hear from you.#EngineeringJobs #TechLeadership #DotNet #SoftwareEngineering #AWS #React #VueJS #TechCareers #Hiring #TeamLead #EngineeringManagerTPBN1_UKTJ

Field Service Engineer \n Bracknell (Covering Nationwide) \n £40,000 - £55,000 Basic + OTE £75,000 + Specialist Laser Training + OEM Training + Technical & Career Progression + Company Vehicle + Fuel Card + Personal Use + Pension + Holidays + Package \n Become a specialist Field Service Engineer with a global leader in laser technology, where you'll receive industry-leading training, maximise your earnings to... \n \n \n \n \n ZIPC1_UKTJ

Electrical Installation EngineerJoin one of the UK's leading Control Systems Integrators.We're looking for an Electrical Installation Engineer to join our growing team, delivering innovative automation and control systems across the UK's water industry. If you enjoy hands-on electrical installation, varied project work and developing your PLC skills, we'd love to hear from you.No two weeks are the same. One day you could be installing new control panels at a water treatment works, the next commissioning PLC equipment on site or supporting customers alongside our experienced Controls Engineers. You'll work independently on some projects and as part of a wider engineering team on others, giving you plenty of variety and opportunities to develop your skills.You'll install, commission and support electrical control systems while receiving training to expand your knowledge of PLC programming and controls engineering.This is a field-based role covering customer sites across the South of England. Most sites are within around three hours of the office, and overnight stays are kept to a minimum (typically less than one night per week). When an overnight stay is required, hotel accommodation is fully provided.Full-time position 45 hours working week, Monday to FridayWhat we are looking forElectrical qualifications C&G, BTEC, NVQ3, ONC or HNC/HND, 18th edition required.ECS Gold card holder or able to qualify for one, which would be covered by Adsyst.Previous experience in a service & support, electrical installation or maintenance role.Control Panel design, manufacture or electrical installation skills.Experience of equipment installation and commissioning, such as PLC'sWhat we require from youA minimum of 2 years of practical experiencePrevious solid understanding of reading electrical diagrams for control panel wiring or electrical installation.Level 3 Electrical Installation (2365)Level 3 Requirements for Electrical Installations (BS7671:2018)Good verbal and written communication skillsUK Driving License – ability to drive company vehicles (welfare vans)Must be eligible to work in the UKWhat you will get in returnAuto enrolment pension scheme (including Salary Sacrifice/Exchange for Pension Payments if desired)25 days holiday (rising to 30 days after 5 years service)Private Health Scheme (after 1 year service)Death in Service Plan (after 5 years service)Access to our Wellbeing programme operated through COGG (https://www.coggroup.co.uk)Company-funded ECS Gold Card/ Black Card if applicableAccess to our Training Hub (various training courses available)Free parking at all our offices (Subject to availability & any company parking policies or parking rotas that may be in effect)Access to company vans or pool cars (company car scheme also available)Access to Perkbox (https://join.perkbox.co.uk) This gives employees access to discounted shopping, eating out, cinema and even holidaysFree quarterly social events, team building days and Christmas party weekend break (partners included).TOIL and expenses schemeCareer progression opportunities includeSenior Installation EngineerCommissioning EngineerControls EngineerTechnical Project ManagerOur companyAt Adsyst Automation Ltd we understand that our continued success is down to our dedicated team, therefore, we invest time and effort in each individual; training and assisting with their personal and professional development, encouraging their strengths while offering a good work/ life balance.Adsyst Automation Ltd has been providing complex Control Systems for Process Control, Automation and Telemetry to customers worldwide for over 35 years. We approach each project with a fresh outlook and use our knowledge and partnerships to stay a step ahead of the competition, offering the most advanced, innovative and cost-effective solutions.At Adsyst Automation Ltd, we embrace diversity and actively seek individuals with unique perspectives to join our team. Our goal is to create a sustainable future by fostering a diverse environment where everyone can thrive. We value inclusion and are committed to providing equal opportunities for all, regardless of race, religion, gender, or background.Join us to contribute to our vibrant culture and make a difference!Other positions are available in this office, as well as our other offices within the UK. Please see our website for more information at : www.adsyst.co.ukTPBN1_UKTJ

Principal Electronics Engineer We are working with an established technology business developing sophisticated electronic and optoelectronic products for demanding applications. Due to continued growth, they are looking for an experienced Principal Electronics Engineer to join a small, highly technical Engineering and Production team based in Wokingham.This is a hands-on position suited to an experienced electronics engineer who enjoys taking ownership of technically challenging projects, from initial concept and system architecture through to design, prototyping, verification, production and continuous improvement.As a Principal Electronics Engineer, you will work closely with the Engineering Manager, internal production teams, external consultants and contract manufacturers, providing technical leadership across new product development while also supporting and improving existing designs.The Role As the Principal Electronics Engineer, you will:Lead electronics activities across new product design and development projects, from initial concept through to production.Take technical ownership of system and electronics architecture, schematic capture, circuit design, modelling, simulation and PCB development.Design and develop mixed-signal analogue and digital electronics, with a strong emphasis on small-signal analogue design.Work on the development of sophisticated optoelectronic, sensing, detection and measurement technologies.Design, prototype and test electronic assemblies and PCBAs.Support the testing, calibration and verification of existing products and electronic sub-assemblies.Troubleshoot, modify and improve legacy electronic designs.Provide technical support to Production teams and external contract manufacturing partners.Work with external PCBA consultants and PCB designers, providing technical direction where required.Lead functional and quality assurance testing and support regulatory certification activities, including CE, LVD and RoHS.Maintain electrical and functional test specifications across a portfolio of 30 designs.Support design for manufacture and design for test activities.Lead continuous improvement, concessions and component obsolescence management.Work independently as a technical lead whilst collaborating effectively within a multidisciplinary engineering environment.What We're Looking For We are looking for an experienced Principal Electronics Engineer with 10 years' hands-on experience in electronics design, testing and low-volume manufacturing environments.You will ideally have:A degree or equivalent qualification in Electronics Engineering or a related discipline.Strong experience in mixed-signal circuit design, including analogue and digital electronics.Significant experience with small-signal linear analogue design.Experience designing high-sensitivity receiver, detector or measurement circuits.Strong hands-on PCB design experience and familiarity with ECAD tools such as Altium, EAGLE, PADS or OrCAD.Experience with system architecture, schematic capture, PCB layout and engineering documentation.Practical experience using laboratory test equipment including oscilloscopes, function generators, bench power supplies and spectrum analysers.Experience with circuit simulation and mathematical modelling tools such as LTSpice, MathCad or Excel.Experience with microcontrollers, programmable devices and/or FPGA-based hardware.Knowledge of embedded controller hardware design.Experience with high-speed data conversion, clocks and timing circuitry.Knowledge of communication interfaces including UART, USB, TWI/I2C and RS485.Experience with power management and analogue/switched DC converters across approximately 3.3V24V.A methodical and analytical approach to engineering and problem solving.Excellent attention to detail and strong communication skills.The ability to work autonomously and take ownership of technically complex projects.Desirable Experience Experience in one or more of the following areas would be highly advantageous:Optoelectronics, including laser diode and photodetector circuits.Pulsed laser drivers, SLD/SLED light sources.APD and PIN photodiode receivers.VOAs and optical modulators, including AOMs/EOMs.RF and microwave receiver design.Small-signal linear analogue circuit design.Electronics operating in challenging noise environments.Sensors incorporating high-speed ADCs (10100MS/s).Temperature control using TECs.EMC-conscious PCB layout and design.Phase Locked Loop (PLL) design.Frequency conversion and RF amplifiers.Photon-counting detectors.FPGA experience, particularly Intel/Altera.Embedded software development, particularly bare-metal Embedded C.VHDL.Control systems, particularly temperature control.Project leadership and technical team leadership.Managing and directing external subcontractors and PCB designers.Designing multi-module mains-powered equipment.Test & Measurement The Principal Electronics Engineer will ideally be comfortable working hands-on with a range of laboratory and specialist test equipment, including:OscilloscopesFunction generatorsBench power suppliesSpectrum analysersRF signal generatorsOptical spectrum analysersOptical power metersWhy Join? This is an excellent opportunity for a senior electronics professional to take genuine technical ownership within a small, specialist engineering environment.You will have the opportunity to work across the full product lifecycle, combining hands-on electronics design with technical leadership, product development, testing and manufacturing support.If you are an experienced Principal Electronics Engineer looking for a role where your technical expertise will have a direct impact on the development of sophisticated products, we would be keen to hear from you.TPBN1_UKTJ

Manufacturing Engineer – NPILocation: Hook, HampshireSalary: Up to £65,000Are you a Manufacturing Engineer with experience in prototyping and new product introduction, looking to play a key role in bringing complex, high-power products into full-scale production?This is a unique opportunity to join an innovative engineering business working on advanced electronic systems, where you'll support both ongoing development and the transition into full NPI and production.The RoleThis is a hybrid Manufacturing Engineer / NPI position, focused on supporting the development and industrialisation of highly complex, high-power electronic products.You'll work closely with engineering and production teams to take evolving designs and turn them into robust, manufacturable products, playing a key role in scaling production capability.The position offers a clear pathway to develop into a dedicated NPI-focused role within 12–24 months.Key ResponsibilitiesSupport the transition of products from prototype to production (NPI)Convert incomplete or evolving designs into manufacturable, production-ready solutionsWork closely with design engineers to refine and improve product performanceDrive improvements around scalability, manufacturability, and efficiencySupport production with technical input, process development, and problem solvingAssist in developing build processes, documentation, and work instructionsContribute to ongoing product development, including performance and design optimisationWhat We're Looking ForExperience as a Manufacturing Engineer within a prototyping or low-volume environmentStrong understanding of NPI processes and product industrialisationExperience working with complex electronic or electromechanical productsAbility to work with evolving designs and bring structure to development projectsHands-on, proactive mindset with strong problem-solving abilityStrong communication skills and ability to work cross-functionallyDesirable ExperienceExperience with high power electronics or amplifiersInterest or exposure to RF technologiesBackground in start-up or fast-paced development environmentsExperience supporting scaling of products into productionWhy Apply?Hybrid working offering flexibility between home and siteOpportunity to work on cutting-edge, high-power technologiesPlay a key role in developing and scaling new productsClear progression into a long-term NPI-focused positionBe part of a growing engineering function with strong future potentialTo ApplyFor more information or to apply, please contact:Lewis Phillips01582 369359TPBN1_UKTJ

Service Engineer | Training | £50,000+ Potential | Overtime x1.5 - 2.0 | Company Van | ProgressionA Service Engineer opportunity has become available with an established manufacturer supplying specialist thermal management systems across a range of growing industries. As the business continues to expand its UK operations, this position offers premium overtime, paid commute time, a company van and genuine opportunities for long-term career progression.Covering customer sites across Bracknell, Slough and the surrounding areas, this is an excellent opportunity to develop your mechanical and electrical skillset whilst working within an ever-growing industry.Service Engineer responsibilities include -Installing mechanical and electrical components across customer sites.Carrying out planned component changeovers to minimise customer downtime.Following technical drawings, instructions and engineering procedures.Completing installation and commissioning activities to the required quality standards.Maintaining high health and safety standards whilst working on customer premises.Service Engineer desirable skills and education -Experience in a similar role - MOT Tester, Vehicle Technician, Mechanic, Automotive Technician, Mechanical Fitter, Assembly Technician, Service Engineer or within a similar hands-on engineering environment.Time served, or Mechanical / Electrical educated (IMI, FGAS, BTEC, HNC or degree desirable).Basic hands-on experience with mechanical assembly (study, home projects or work-based).Experience working within automotive, commercial vehicle, HVAC, refrigeration, manufacturing or field service environments would be advantageous.Ability to follow technical drawings, instructions and assembly procedures.Service Engineer benefits include -Training provided from day one.£45,000 salary - 38.5 hours per week.Readily available premium overtime @ 1.5 - 2.0.Paid commute time.Company van and fuel card.Buddy-up system and certified training if required.25 Days' Annual Leave.Long-service award scheme.Enhanced maternity and paternity packages.Clear career progression opportunities.Working for a leading business within an ever-growing industry.If you'd like to know more about this Service Engineer position, please apply through this advert immediately .ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity.TPBN1_UKTJ

MEICA Engineer x 2 Sandhurst, Surrey Temporary to Permanent Opportunity* 45 Hours Per WeekJoin Our Client's Growing Water Infrastructure TeamOur client is seeking experienced MEICA Engineers to support the successful delivery of major water and wastewater infrastructure projects. This is an excellent opportunity for a highly skilled engineering professional with extensive experience in MEICA design, delivery, and commissioning to play a key role throughout the full project lifecycle, from design and construction through to commissioning and handover.Key ResponsibilitiesLead, plan, and deliver MEICA and commissioning activities across project lifecycles.Coordinate with designers, construction teams, subcontractors, suppliers, and stakeholders.Ensure projects are delivered safely, on programme, and within budget.Manage MEICA interfaces, outages, commissioning activities, and project risks.Review technical specifications for compliance with industry standards and project requirements.Attend and lead project meetings, workshops, and commissioning reviews.Produce and coordinate handover documentation including commissioning manuals and O&M manuals.Promote best practice across health, safety, environmental, and quality standards.Support audits and compliance activities as required.Undertake duties as an LV Authorised Person where necessary.Essential Experience10+ years' experience in MEICA Design, Delivery and Commissioning within the water industry.Experience working on complex water and wastewater treatment projects.Previous experience as an Electrical or Mechanical Authorised Person on complex systems.Strong understanding of the full project lifecycle including ECI, design reviews, commissioning, quality plans, RAMS, and handover processes.Proven track record of delivering multiple projects from concept through to completion.Excellent leadership, organisational and stakeholder management skills.Strong communication skills with the ability to work effectively with multidisciplinary teams.Qualifications & CertificationsHNC in Engineering or completed Engineering Apprenticeship with relevant MEICA experience.CSCS/ECS Card.SMSTS Certification.First Aid at Work.Blue Water Hygiene Card.Thames Water Passport.Knowledge of applicable standards, safety regulations and statutory legislation.Professional registration or membership with IET, IMechE or SOE (EngTech, IEng or CEng) desirable.If you are an experienced MEICA professional looking for your next challenge within the water sector,and would like to learn more or just for an initial, no-obligation conversation please apply now and I will contact you as soon as I receive your application.This vacancy is being advertised by BelcanTPBN1_UKTJ

FIELD SERVICE ENGINEER - Electrical Forecourt EquipmentCommercial Industrial Drive Through Carwash EquipmentAre you a Field Engineer, Service Engineer, Maintenance Engineer, Electrical Engineer, Electrical Mechanical Engineer?Can use a Multi Meter?For a market leader who design, manufacture, install & maintain vehicle wash solutions, using the latest technology for their Drive Through Automated Carwash equipment found on petrol forecourts, bus & truck depots and associated sectors.The JobWe are seeking a Field Service Engineer to join our team to service, maintain & repair our customers Retail Commercial Car Wash equipment - incuding rollover car washes, jet washes, etcBased from home and working from your field service vehicle, you will be visiting clients sites which include fuel stations, car dealerships, etc undertaking planned maintenance, servicing & repair of commercial carwash equipment.This includes;Responding to customer call outs for machine repairs.Complete scheduled preventative maintenance tasks.Use a company tablet to complete service paperwork.Ensure all van stocks and company equipment are maintained.Your Skills & Experience:Multi Meter & Electrical problem solving & fault-finding skills.Working knowledge of electrics (three phase advantage).Be customer focused.Previous experience working in a field-based role.Comfortable working indoors and outdoors.Confidence in working alone as well as part of team.Full UK Driving License required.The successful candidate will receive full product training along with health & safety to work on customers outlets.Working HoursWorking Monday to FridayYour day includes all travel leaving home at 8am and home before 6pm.Additional Weekend work based on a 1 in 3 weeks rota system.RemunerationPackage of circa;starting £37,400 to £39,400 (including weekend rota)All tools & uniform, phone & tablet provided.Company Vehicle - with private use option.Fuel card and corporate credit card.Company pension scheme.Interested in applying or knowing more?If you are a Field Engineer, Service Engineer, Electrical Engineer, Maintenance Engineer or Electro-Mechanical Engineer or Commercial Electrician looking for your next move, then contact us at startMonday now!TPBN1_UKTJ

Job Title: Product Engineer (Test) \n Location: Bracknell \n Salary: Competitive \n Job Type: Permanent, Full time \n About BSRIA: \n BSRIA is a science-driven, independent organisation providing practical guidance and commercial solutions for the built environment. With 70 years of expertise, BSRIA delivers impactful insights through market intelligence, consultancy, testing, compliance, research, training, and inst... \n \n ZIPC1_UKTJ

MULTI-SKILLED MAINTENANCE ENGINEER Job Title: Multi-Skilled Maintenance EngineerLocation: ReadingSalary: Up to £54,000Shift: 4 on 4 off Days & NightsThe Role A fantastic opportunity has arisen for a Multi-Skilled Maintenance Engineer to join a well-established and growing manufacturing business in Reading.This is a fast-paced production environment where you'll become part of a highly skilled engineering team responsible for ensuring maximum machinery reliability and plant performance. The business continues to invest heavily in both its people and equipment, offering excellent long-term career prospects and ongoing technical development.As a Multi-Skilled Maintenance Engineer, you will carry out both planned and reactive maintenance activities, diagnose faults, minimise downtime, and contribute to continuous improvement projects across the site.Key Responsibilities Carry out planned preventative maintenance (PPM) across production machinery and site equipment.Respond promptly to equipment breakdowns and diagnose faults efficiently.Conduct both electrical and mechanical fault finding and repairs.Work collaboratively with production teams to minimise downtime.Support continuous improvement and reliability initiatives.Ensure all maintenance work is completed safely and in line with company procedures.Accurately complete maintenance documentation and reports.Sector Manufacturing / Factory MaintenanceEssential Requirements Previous experience working as a Multi-Skilled Maintenance Engineer within a manufacturing, FMCG, processing, distribution, or industrial environment.Strong electrical and mechanical fault-finding abilities.Experience carrying out planned, preventative, and reactive maintenance.Recognised engineering qualification (Electrical, Mechanical, Multi-Skilled or equivalent).Ability to work effectively within a fast-paced production environment.Desirable Experience PLC fault-finding experience, including working with inputs and outputs.Experience working on conveyors, motors, drives, sensors, pumps, pneumatics, and control systems.Previous experience within an automated manufacturing environment.What's on Offer? Salary of up to £54,0004 on 4 off Days & Nights shift pattern providing excellent work-life balance.Opportunity to join a stable and growing manufacturing business.Ongoing training and development opportunities.Company pension scheme.Life assurance.Additional employee benefits package.Long-term career progression opportunities.If you are interested in this opportunity and feel you have the required skills and experience, please apply today.For further information, please contact Mike Lester at Pioneer Selection Ltd .As a registered candidate with Pioneer Selection Ltd, you will automatically be eligible for our referral scheme.Receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply. Please visit our website for further details.TPBN1_UKTJ

Structural EngineerLocation: WokinghamSalary: £48,000 to £55,000Industry: Building Structures, Commercial, ResidentialWorking Pattern: Hybrid (3 days onsite, 2 days WFH)An opportunity has opened for a Structural Engineer to join a construction and engineering company based in Wokingham. The ideal candidate will either be Chartered or nearly Chartered with 5+ years post-graduate experience. You will also be experienced within building structures with materials like masonry, timber, steel and/or reinforced concrete.You will be involved in the full project lifecycle from concept to completion and working alongside architects and other Structural Engineers. If you arent chartered yet, you will receive mentorship to achieve this. They offer 25 days holiday + bank holidays and hybrid working.Structural Engineer Key Skills:Post-grad experience in Structural Engineering within building structures / constructionExperience with ideally a few of timber, masonry, steel, reinforced concreteChartered status or near charteredStructural design experienceBackground conducting calculation and analysisSite surveying experienceKnowledge of UK design standardsFull UK Driving LicenceIdeally Revit and BIM experienceStructural Engineer Responsibilities:Working with other structural engineers and architects on projects from start to finishDesigning, analysing and conducting calculations for building structuresWorking on commercial and residential projectsConducting site surveys and ensuring projects are running smoothlyDelivering designs and making amendments where neededCarrying out inspectionsIf you could be interested in finding out more about this role, please apply with your latest CV.TPBN1_UKTJ

Lead Maintenance EngineerA fantastic opportunity for a Lead Maintenance Engineer has arisen to work for an international manufacturing business based locally to the Bracknell area.Location Commutable from Bracknell, BerkshireSalary - £54,500 basic + Overtime + Great packageSkills required for the role of Lead Maintenance Engineer -Carrying out planned and reactive maintenance on production equipmentSupporting and developing other members of the teamCarry out continuous improvement projectsEnsuring H&S procedures are followedGood mechanical and electrical knowledgeHappy to work 12-hour shifts days and nightsCompany benefits£54,500 salary + Overtime + BonusGreat package / Life assurance / Discounted gym membership / Retail discounts / Long service rewardsWorking for an international organizationGreat career development planOn-site parkingCommutable from: Bracknell, BerkshireOther job titles Lead Maintenance Engineer, electrical maintenance engineer, mechanical maintenance engineer, Senior engineerTPBN1_UKTJ

Project Engineer \n \n \n A fantastic opportunity for a Project Engineer has arisen to work for an international manufacturing business based locally to the Bracknell area \n \n . \n Location – Commutable from Bracknell, Berkshi \n reSalary – Up to £50,000 basic + Great packa \n geHours – Monday – Friday (8am – 4:30p \n \n m) \n Skills required for the role of a Project Enginee \n\n • r -Experience in engineering roles supporting capital equipment or production line proje\n, • ctsExperience with equipment specification, installation, and commission\n, • ingExperience working in a regulated manufacturing environm\n, • entStrong technical problem-solving ski\n, • llsGood cross-functional communication ski\n, • llsFamiliarity with project management tools and methodolog\n, • iesBasic CAD capability for 2D drawi\n, • ngsFamiliarity with validation proces\n, • sesExperience with automation, robotics, or complex production equipm\n\n \n ent \n Company benefi \n\n • ts –Up to £50,000 sa\n, • laryGreat package / Life assurance / Discounted gym membership / Retail discounts / Long service rew\n, • ardsWorking for an international organiza\n, • tionOn-site par\n\n \n king \n Commutable from: Bracknell, Berk \n \n shire \n Other job titles – Project Engineer, Project M \n anager

Field Service Engineer - CNC MachinesJob Type: PermanentLocation: Reading, Berkshire, Basingstoke, Hampshire, Oxford, Oxfordshire, Swindon, WiltshirePost Code: RG40 2AFSalary: £50,000 + Car / VanStart Date: ASAPUK distributor of German CNC Machines requires an experienced Field Service Engineer - CNC Machines to join their team based near Reading. Your role will be to travel across the UK and Ireland, installing, repairing and maintaining CNC Machines with a particular emphasis on Laser manufacturing in the Electronics sector.Your background should include extensive commercial experience of installing and maintaining a range of CNC Machines. Of particular interest will be Field Service Engineers with exposure to CNC Laser Machines used in electronics manufacturing.The role requires extensive travel across the UK and Ireland and so regular stays away from home will be required.The role will suit individuals currently working as Field Service Engineer - CNC Machines, Service Engineer and be living within a commutable distance of Reading, Berkshire, Basingstoke, Hampshire, Oxford, Oxfordshire, Swindon, Wiltshire or be willing to relocate.Please forward your CV by clicking Apply Now!TPBN1_UKTJ

We're hiring | Salesforce Developer - Product Engineering Team (ISV) in Winnersh (Reading area), UK | Hybrid (3 days onsite)Sage People is a global HR & people management SaaS product built on the Salesforce (Force.com) platform, serving customers worldwide. As an ISV, we build and evolve one single product, with a strong focus on code quality, scalability and long term architecture.Salesforce is the #1 global CRM platform and a mature, enterprise-grade application ecosystem. It combines a strongly typed, object-oriented server-side language (Apex) with standards-based frontend development using Lightning Web Components. Much of our work involves custom Apex and LWC development, applying core software engineering principles such as OO design, automated testing, performance tuning, and CI/CD.Team culture & environmentWhat really makes this role stand out is the team.- A stable, close knit engineering group - many team members have worked together for 8+ years- A friendly, supportive and human environment, where people genuinely enjoy working together- Engineers, testers, architects and product managers collaborating daily as one product team- A culture that values shared ownership, learning and constructive technical discussions- Strong leadership momentum and investment, particularly around AI and Salesforce innovation- A modern, welcoming office in Winnersh, with teams enjoying face to face collaboration as part of a hybrid modelYou'll join a team where collaboration matters more than hierarchy, and where people stay because they like both the work and the people.What you'll be doingAs a Salesforce Developer, you will:- Work with TheForce.complatform, delivering customer and people managementfunctionality- Translate complex business requirements into robust, scalable technical solutions- Contribute to technical design, architecture discussions and system thinkingCollaborate closely with:- Salesforce Developers team- Angular frontend engineers- Testers, Product Managers and Architects- Work in a modern environment using Git, Jira, IntelliJ, CI/CD pipelines- Take part in Scrum / SAFe ceremonies, quarterly planning and product releases- Contribute to a product roadmap that increasingly includes AI-driven capabilitiesWork hands-on with: Apex, SOQL, JavaScript, Salesforce Lightning / Lightning Web Components (LWC) / VisualForce / APIsImportant: this role requires real, hands-on development on Salesforce - it is not a configuration or admin position.What we're looking forCore skills- Proven experience with object-oriented programming, e.g. Java or C#- Experience developing with Salesforce Lightning- Hands-on delivery of solutions on theForce.complatform- Strong proficiency in Apex, SOQL and JavaScript- Ability to manage and deliver complex business and technical requirementsNice to have- Experience with Git, Jira and IntelliJ, and CI/CD practices- Exposure to Salesforce REST APIs- Salesforce Developer CertificationWe are open to:- Experienced Salesforce Developers, or / and- Backend developers (Java / C#) looking to specialise in Salesforce, with strong development fundamentals and a desire to learnBenefits - we have plenty!- Competitive salary plus generous bonus scheme- Pension plan: up to 8% matched + 2% top-up by Sage- 25 days annual leave, with the option to buy up to 5 more- 8 bank holidays- 5 paid volunteer days per year via the Sage Foundation- 50% income protection- Holiday buy & sell- Comprehensive health, dental and vision coverage- Work Away scheme (up to 10 weeks per year)- Ongoing training and professional development- Hybrid working- Healthy Mind app membership- Access to financial, health and wellbeing membershipsDiscover life at Sage:If you're looking for a Salesforce developer role with real technical depth and a genuinely great team culture, we'd love to hear from you.TPBN1_UKTJ

Maintenance Engineer (DAYS ONLY) \n \n A fantastic opportunity for a Maintenance Engineer has arisen to work for an international manufacturing organization based locally to the Bracknell area. \n \n Salary – Up to £45,000 + Overtime + Package \n Location – Commutable from Bracknell \n Hours – Days only, Monday – Thursday \n \n Skills required for the job of a Maintenance Engineer (Reliability team) \n\n • Looking at the equipment reliability and manufacturing performance\n, • Improving equipment reliability through continuous improvement\n, • Maintenance and repairs on production machinery\n, • Carry out PPMs.\n, • Electrical engineering, single, 3 phase, motors and inverters.\n, • Mechanical, hydraulics, pneumatics, bearings, pumps, chains, and valves.\n\n \n Company benefits – \n\n • £45,000 basic salary + Overtime\n, • Pension / Holidays / Good bonus scheme\n, • Great prospects to develop technically and professionally within the business.\n, • DAYS ONLY position\n\n \n Commutable from: Bracknell \n \n Other job titles – RME, Reliability engineer, Multi-skilled maintenance engineer, Shift engineer, Electrical maintenance engineer, Maintenance technician, Automation engineer \n

As we continue to develop increasingly complex integrated systems, we are seeking a Software Validation Engineer to help ensure the quality, reliability, and performance of our products. \n In this role, you will be responsible for designing, building, and executing comprehensive validation strategies covering both manual and automated testing. You will work across complex software and hardware subsys... \n \n ZIPC1_UKTJ

Groundworks Site Supervisor 📍 Wokingham, Berkshire 💷 £250–£260 per day 📅 Contract: 27 July–28 September 2026 Day shifts | Occasional weekend work 🚧 Hands-on Groundworks Supervisor needed for a live school project in Wokingham. Take control of the gang, keep the works safe and productive, and work directly with the client — with support from a Senior Site Manager rather than layers of management. About the role You will supervise the groundworks package at St Paul’s School, organising daily activities and keeping the project moving safely and to programme. This role suits a practical supervisor who is comfortable managing the site while stepping in to support the gang when required. Key responsibilities • Supervise the groundworks gang and organise daily works, • Monitor safety, quality, productivity and progress, • Coordinate labour, materials and work areas, • Deliver site briefings and toolbox talks, • Check works against drawings and programme requirements, • Report progress, delays and site issues, • Maintain professional communication with the client, • Work closely with the Senior Site Manager Requirements • Proven groundworks supervisory experience, • Strong construction, civils or groundworks background, • Experience supervising gangs or small site teams, • Valid CSCS card, • Valid SSSTS, • Valid First Aid, • Good knowledge of site health and safety, • Confident reading drawings and monitoring programmes, • Reliable, hands-on and client-facing approach Desirable background Experience delivering groundworks packages within live schools, commercial sites, public-sector buildings or occupied environments would be useful. Why consider it? ✅ £250–£260 per day ✅ Defined contract through September 2026 ✅ Direct responsibility for a live project ✅ Support from an experienced Senior Site Manager ✅ Potential follow-on work across London and the Home Counties Best-Fit Candidates / Useful Matching Context Relevant profiles may currently work as a Groundworks Supervisor, Civils Supervisor, Site Supervisor, Working Foreman, Groundworks Foreman or General Foreman within groundworks contractors, civil engineering firms, RC frame contractors or construction subcontractors. Apply through LinkedIn with your latest CV and current availability. Recommended LinkedIn posting skills • Groundworks, • Site Supervision, • Construction Safety, • Civil Engineering

Business Development Manager (Engineering) £45,000 + ( OTE £55,000 - £65,000 )+ Benefits Location - Bracknell (Commutable from Reading, Wokingham, Slough, Maidenhead, Windsor, Camberley, Guildford & surrounding areas) Are you an experienced Business Development Manager with a ba

Location – Commutable from Bracknell, Berkshire Salary - £54,500 basic + Overtime + Great package Skills required for the role of Lead Maintenance Engineer - Carrying out planned and reactive maintenance on production equipment Supporting and developing other members of the t

Structural Engineer Key Skills: Post-grad experience in Structural Engineering within building structures / construction Experience with ideally a few of timber, masonry, steel, reinforced concrete Chartered status or near chartered Structural design experience * Background co

Location – Commutable from Bracknell, Berkshire Salary – Up to £50,000 basic + Great package Hours – Monday – Friday (8am – 4:30pm) Skills required for the role of a Project Engineer - * Experience in engineering roles supporting capital equipment or product

Senior Security Engineer Location: Hybrid (1–2 days per week in the Bracknell office) Type: Full-time Are you passionate about protecting organisations from evolving cyber threats? Our client is looking for a Senior Security Engineer to play a key role in strengthening their security posture

To facilitate this growth, it is pivotal to recruit an experienced Electrical Design Engineer to ensure the technical integrity of the rapidly expanding LED upgrade portfolio. For the avoidance of doubt, this is not a creative lighting design role.

We're looking for an Electrical Installation Engineer to join our growing team, delivering innovative automation and control systems across the UK's water industry.

Audio Visual Installation Engineer (onsite, various clients South East, England) Job ID: 42140 £40,000 - £42,000 per annum + Vehicle Mon to Fri: 8:30am – 5:30pm (flexi) Main office Woodley We are looking for a Audio Visual Installation Engineer with the necessary skill and ex

WE Talent are recruiting for both a 1st Line Helpdesk Engineer and a 2nd Line Helpdesk Engineer to join a growing IT support team based in Yateley. These are excellent opportunities for customer-focused IT professionals who enjoy troubleshooting technical issues, supporting users and developing thei

DAYS ONLY position Commutable from: Bracknell Other job titles – RME, Reliability engineer, Multi-skilled maintenance engineer, Shift engineer, Electrical maintenance engineer, Maintenance technician, Automation engineer. Maintenance Engineer (DAYS ONLY) A fantastic opportunity for a Mainte

Project Engineer A fantastic opportunity for a Project Engineer has arisen to work for an international manufacturing business based locally to the Bracknell area. Location Commutable from Bracknell, Berkshire Salary Up to £50,000 basic + Great package Hours Monday Friday (8am 4:30pm) Skills required for the role of a Project Engineer - Experience in engineering roles supporting capital equipment or production line projects Experience with equipment specification, installation, and commissioning Experience working in a regulated manufacturing environment Strong technical problem-solving skills Good cross-functional communication skills Familiarity with project management tools and methodologies Basic CAD capability for 2D drawings Familiarity with validation processes Experience with automation, robotics, or complex production equipment Company benefits Up to £50,000 salary Great package / Life assurance / Discounted gym membership / Retail discounts / Long service rewards Working for an international organization On-site parking Commutable from: Bracknell, Berkshire Other job titles Project Engineer, Project Manager JBRP1_UKTJ

Maintenance Engineer (DAYS ONLY) A fantastic opportunity for a Maintenance Engineer has arisen to work for an international manufacturing organization based locally to the Bracknell area. Salary Up to £45,000 + Overtime + Package Location Commutable from Bracknell Hours Days only, Monday Thursday Skills required for the job of a Maintenance Engineer (Reliability team) Looking at the equipment reliability and manufacturing performance Improving equipment reliability through continuous improvement Maintenance and repairs on production machinery Carry out PPMs. Electrical engineering, single, 3 phase, motors and inverters. Mechanical, hydraulics, pneumatics, bearings, pumps, chains, and valves. Company benefits £45,000 basic salary + Overtime Pension / Holidays / Good bonus scheme Great prospects to develop technically and professionally within the business. DAYS ONLY position Commutable from: Bracknell Other job titles RME, Reliability engineer, Multi-skilled maintenance engineer, Shift engineer, Electrical maintenance engineer, Maintenance technician, Automation engineer JBRP1_UKTJ

The Role Provide design solutions from work winning concept phase to practical completion of projects with the common goal to win contracts and increase site net margin Deliver competitive ground engineering designs, holistic rather than simply piling elements Accountability for creating designs tha

Deliver competitive and innovative design solutions Ensure design efficiency and buildability Take accountability for creating designs that are not only efficient but also practical and buildable, with input from collaboration with the operational teams. Analyse the project input to reach an agreeme

Prattwhitney seeks a Marine Engineering Submarine (MESM) Subject Matter Expert to gather technical data for the courseware and media development programme.

Experience in network design / architecting ideally at enterprise level with a solid grasp on pre-sales, bid work and tendering. Pre-sales Network Architect - Gain DV Clearance. Excellent opportunity for a Network Architect to join a global leader in IT managed services and preferred partner of the

Hamilton Rentals are looking to recruit an Audio Visual Rental and Installation Engineer to join their expanding AV and Value Added Service team.

A leading technology firm in Yeovil is seeking an Electronic Hardware Engineer to design and test advanced electronic systems. Ideal candidates should have a degree in Electronic Engineering, experience in electronic design, and strong collaboration skills.

Other job titles –Lead Maintenance Engineer, electrical maintenance engineer, mechanical maintenance engineer, Senior engineer. A fantastic opportunity for a Lead Maintenance Engineer has arisen to work for an international manufacturing business based locally to the Bracknell area. Skills require

Desirable* Salesforce architecture or administrator certifications, such as Salesforce Certified Application Architect, System Architect or Technical Architect. About YouEssential* Experience as a Salesforce Architect, Platform Architect, Solution Architect or similar role in a complex organ