Trabajos customer support engineer en LutonCrear alertas

Lead Hardware Engineer \n Based in Luton \n 12-month contract \n Paying up to £70p/h (Inside IR35) \n \n Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance \n \n Overview: Required to solve complex technical challenges involving high-speed digital design, FPGA-based architectures, signal processing, hardware integration and system qualification within a highly regulated defence environment. \n \n Responsibilities: \n\n • Design and develop complex digital and mixed-signal hardware solutions for defence and aerospace applications.\n, • Define hardware architectures for FPGA, SoC and processor-based systems.\n, • Capture schematics and support PCB layout activities for high-speed, high-performance digital designs.\n, • Design and verify high-speed interfaces including DDR memory, PCIe, Ethernet and similar protocols.\n, • Integrate FPGA, processor, software and firmware components into complete system solutions.\n, • Perform design analysis, simulation, validation and verification activities.\n, • Support hardware bring-up, debugging and root-cause investigation at board and system level.\n, • Work closely with Systems, Firmware, Software, RF, Mechanical and Production Engineering teams.\n, • Support environmental, EMC/EMI and qualification testing in accordance with defence and aerospace standards.\n, • Produce technical documentation, design evidence and progress reporting in accordance with structured engineering lifecycles.\n, • Support customer demonstrations, integration activities, acceptance testing and trials.\n\n \n Experience required: \n\n • Proven experience designing high-speed digital electronics within aerospace, defence or other safety/mission-critical industries.\n, • Strong background in FPGA and SoC-based hardware architectures (Xilinx, AMD, Intel/Altera or equivalent).\n, • Practical board-level debugging using oscilloscopes, logic analysers, spectrum analysers and protocol analysers.\n, • Experience integrating hardware, firmware and software on complex embedded systems.\n, • Experience developing products to demanding EMC, EMI and environmental requirements.\n, • Experience designing complex multilayer PCBs incorporating: High-speed serial interfaces; High-performance processors; DDR memory subsystems & FPGA-based signal processing solutions.\n, • Knowledge of DO-254, DEF STAN, MIL-STD or equivalent aerospace and defence standards.\n, • Experience with FPGA signal processing architecture\n\n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Service Engineer (Medical Equipment)£43,000 - £48,000 + Door-to-Door Pay + Overtime + Company Van + Tools + TrainingLuton, M1 CorridorAre you a Field Service Engineer, Service Engineer, Maintenance Engineer, or similar with experience installing, maintaining, or repairing equipment, looking to join an established company offering excellent training, door-to-door pay, overtime, a company van, and tools?On offer is the opportunity to join a specialist business providing equipment and technical support into cleanroom, controlled environment, and specialist facility settings. You will receive structured training, including around 3 months on-site training followed by 3 months field-based learning while buddied up with an experienced engineer. You will be supported in developing your technical skills while working on specialist equipment across customer sites.In this varied role, you will be based from home and travel to customer sites across Luton and the M1 corridor, carrying out installations, planned maintenance, breakdown repairs, fault finding, and general service work. You will work safely on customer sites, use specialist tools, and ensure equipment is operating efficiently, with clean room experience being advantageous.This role would suit a Field Service Engineer with a practical background who is looking for a role with structured training, door-to-door pay, enhanced overtime, a company van, and long-term development.The Role: Installing, maintaining, servicing, and repairing specialist equipment Field-based across Luton and the M1 corridor, with door-to-door pay Structured training, company van, tools, and overtime available at enhanced rate.The Person: Field Service Engineer, Service Engineer, Maintenance Engineer, or similar Ideally clean room experience Experience with installation, maintenance, breakdowns, or service work* Full UK Driving Licence and happy covering M1 corridorReference:BBBH26749AKeywords: Field Service Engineer, Service Engineer, Maintenance Engineer, Installation Engineer, Mechanical Engineer, Electrical Engineer, Equipment Engineer, Service Technician, Maintenance Technician, Clean Room, Cleanroom, Medical Equipment, Specialist Equipment, Fault Finding, Breakdowns, Planned Maintenance, Installations, Field-Based, Home-Based, Door-to-Door Pay, Company Van, Tools, Luton, M1 Corridor, Milton Keynes, Northampton, Bedford, Stevenage, St Albans, Hemel Hempstead, Watford, Dunstable, Leighton Buzzard.If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates.The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.TPBN1_UKTJ

Principal Firmware Engineer \n Based in Luton \n 12-month contract \n Paying up to £85p/h (Inside IR35) \n \n Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance \n \n Overview: As the Principal Firmware Engineer, you will work with the support of experts in their field, using world-class facilities to deliver Firmware for complex digital systems that meet challenging future customer requirements. \n \n Responsibilities: \n\n • Auto-generating code using model-driven engineering using MATLAB and Simulink tools\n, • Design using tools such as Xilinx, TCL, Verilog, System Verilog, and UVM\n, • Derivation of detailed Firmware requirements and architecture from system requirements\n\n \n Experience required: \n\n • Design tools such as Xilinx, TCL, Verilog, System Verilog, and UVM\n, • FPGA architectures such as Xilinx 7. Xilinx UltraScale; Intel (Altera) or Microsemi (Actel).\n, • Fast interfaces such as PCIe, Ethernet, and JESD\n, • A structured approach to firmware design (RTCA DO-254 or similar)\n, • Cryptography and anti-tamper techniques\n, • Artificial Intelligence including machine learning and genetic algorithms\n, • Electronics test methods and equipment\n, • Working in mixed discipline teams\n, • HNC/HND or Undergraduate Degree (Electronic Engineering, Computer Science, AI, Games Programming, Physics, or Applied Physics) or you may just have lots of skills and experience gained through your hard work.\n\n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Principal / Lead Hardware Engineer Location: Luton, Bedfordshire (LU1)Duration: 12 MonthsOnsite: 90% onsiteRate: £95.44ph UMBRELLASecurity: We seek an engineer with recent high-integrity or safety-critical industry experience (defence, aerospace, or similar), or eligible for UK security clearance.The Opportunity We're looking for an experienced Principal / Lead Hardware Engineer to join a major defence programme developing advanced electronic systems for air, land and maritime platforms.This is a fantastic opportunity to work on complex FPGA and processor-based hardware, contributing throughout the full product lifecycle—from requirements capture and architecture through detailed design, integration, verification and qualification.You'll be working alongside multidisciplinary engineering teams to deliver high-performance electronic hardware for safety and mission-critical applications.Key Responsibilities Design and develop complex digital and mixed-signal electronic hardware.Develop hardware architectures for FPGA, SoC and processor-based solutions.Produce schematics and support PCB layout for high-speed digital designs.Design and validate interfaces such as DDR memory, PCIe, Ethernet and other high-speed protocols.Integrate hardware with embedded software, firmware and FPGA solutions.Carry out simulation, verification, validation and design analysis activities.Support board bring-up, hardware debugging and fault investigation.Work collaboratively with Systems, Software, Firmware, RF, Mechanical and Manufacturing Engineering teams.Support environmental, EMC/EMI and qualification testing.Produce technical documentation throughout the engineering lifecycle.Support system integration, demonstrations and customer acceptance activities where required.Essential Skills & Experience Strong background in high-speed digital hardware design within defence, aerospace or other highly regulated industries.Experience designing FPGA and SoC-based hardware (Xilinx, AMD, Intel/Altera or equivalent).Proven experience designing complex multilayer PCBs, including: High-speed serial interfacesDDR memoryHigh-performance processorsFPGA-based digital signal processingExperience using schematic capture and PCB design tools such as Altium Designer, OrCAD, Xpedition or equivalent.Hands-on board-level debugging using oscilloscopes, logic analysers and protocol analysers.Experience integrating hardware with embedded firmware and software.Strong understanding of signal integrity, power integrity and timing analysis.Experience supporting verification, validation and qualification activities.Ability to translate system requirements into robust hardware designs.Desirable Experience Electronic Warfare, Radar, RF, Communications or Sensor technologies.Development of safety-critical or mission-critical systems.FPGA signal processing.Knowledge of DO-254, DEF STAN, MIL-STD or equivalent industry standards.Hardware design reviews and technical leadership.Design for Manufacture (DfM), Design for Test (DfT) and Design for Reliability (DfR).TPBN1_UKTJ

Lead Hardware Engineer \n Luton | 4 Days Onsite Per Week \n 12-Month Contract \n £65 per Hour (Inside IR35) \n Active SC Clearance Required \n Winsearch is currently recruiting for a Lead Hardware Engineer to join a leading defence engineering organisation delivering advanced Electronic Warfare and Defensive Aids Systems across air, land and maritime platforms. \n This is an exciting opportunity to work on technically challenging programmes at the forefront of defence technology, developing mission-critical hardware that supports some of the world's most advanced military platforms. \n Working within a multidisciplinary engineering environment, you'll contribute throughout the entire product lifecycle, from requirements capture and architecture definition through to integration, qualification and customer acceptance. \n The Role \n As a Lead Hardware Engineer, you'll take a key role in the design and development of complex digital and mixed-signal electronics for high-performance defence applications. \n You'll work closely with systems, firmware, software and RF engineering teams to develop robust hardware solutions capable of operating in demanding environments. \n Key Responsibilities \n\n • Design and develop advanced digital and mixed-signal hardware.\n, • Define hardware architectures for FPGA, SoC and processor-based systems.\n, • Create schematics and support PCB layout activities for high-speed designs.\n, • Develop and verify interfaces including DDR memory, PCIe and Ethernet.\n, • Integrate hardware, firmware and software into complete system solutions.\n, • Perform simulation, verification and validation activities.\n, • Support board-level bring-up, debugging and fault investigation.\n, • Collaborate with cross-functional engineering teams across the product lifecycle.\n, • Support environmental, EMC and qualification testing.\n, • Produce technical documentation and engineering evidence to support programme delivery.\n, • Support customer demonstrations, trials and acceptance activities.\n\n Skills & Experience \n We're keen to hear from engineers with experience in high-speed digital electronics design gained within defence, aerospace or other highly regulated industries. \n Essential \n\n • Strong background in FPGA and SoC-based hardware architectures.\n, • Experience designing complex multilayer PCB assemblies.\n, • Knowledge of high-speed serial interfaces, processors and memory subsystems.\n, • Experience with tools such as Altium Designer, OrCAD, Xpedition or equivalent.\n, • Practical hardware debugging and fault-finding experience using industry-standard test equipment.\n, • Understanding of signal integrity, power integrity and timing considerations.\n, • Experience integrating hardware, firmware and software within embedded systems.\n, • Ability to translate system requirements into effective hardware solutions.\n, • Experience supporting verification, validation and qualification activities.\n\n Desirable \n\n • Electronic Warfare, Radar, RF, Communications or Sensor Systems experience.\n, • Safety-critical or mission-critical product development.\n, • FPGA signal processing architectures.\n, • Knowledge of aerospace and defence standards including DO-254, DEF STAN or MIL-STD.\n, • Experience leading technical reviews and mentoring engineers.\n, • Design for Manufacture, Design for Test and Design for Reliability methodologies.\n\n Requirements \n\n • Active SC Clearance.\n, • Sole British National status due to programme security requirements.\n, • Strong communication skills and the ability to work effectively within multidisciplinary teams.\n\n What's on Offer? \n\n • £65 per hour (Inside IR35)\n, • Initial 12-month contract\n, • Hybrid working with four days per week onsite in Luton\n, • Work on cutting-edge Electronic Warfare and Defence programmes\n, • Exposure to advanced technologies and complex engineering challenges\n, • Collaborative environment with experienced engineering specialists\n\n If you're looking for a contract opportunity where you can contribute to the development of next-generation defence technology, we'd love to hear from you. \n Apply today or contact Winsearch for a confidential discussion. \n INDWIN \n Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see Many Thanks

Company description:Fantastic challenges. Amazing opportunities.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career.Job description:Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines.Join our Transparencies team as a Principal Design Engineer and help drive innovative design solutions.We are looking for a Principal Design Engineer to join our Transparencies team to support a portfolio of new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows.The Principal Design Engineer is a technical authority within the Transparency Systems team, responsible for leading complex product development, driving technical strategy, and ensuring engineering excellence across multiple programmes. It spans the full lifecycle: advanced concept development, requirements definition, geometric design, materials and process selection, supporting tooling design, manufacturing development, qualification, and in service support.The Principal Design Engineer also plays a major role in shaping technology roadmaps, mentoring engineering teams, and representing the business in high-level customer, regulatory, and airworthiness discussions.This role requires flexibility for occasional travel, both within the UK and internationally. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday.Job Responsibilities Act as the technical authority for transparency design across multiple programmes, ensuring design integrity, safety, and compliance with customer, regulatory, and airworthiness requirements.Lead the definition of design standards and engineering best practices for transparency systems and approve design solutions, specifications, concessions, rework schemes, and compliance documentation.Provide expert guidance on requirements management, materials selection, structural performance, optical performance, manufacturing processes and qualification methods.Represent Design function in MRBs and serve as the primary escalation point for all MRB-related queries, exercising technical authority to determine and approve the disposition of non conforming parts.Define and validate test methods and/or alternate means of compliance (analysis/similarity) as required to demonstrate design solution complies with requirements.Act as a senior technical interface with customers, suppliers, regulatory bodies, and internal stakeholders. Communicate complex technical information clearly to both technical and non technical audiences.Lead major technical reviews, gate reviews, and customer design reviews, ensuring high quality technical data and presentations.Identify, assess, and manage technical risks across programmes, proposing mitigation strategies and influencing programme direction.Support capability development within the Transparency Systems team including training, knowledge capture, and succession planning.You will contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership.Profile description:What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes:Essential:Degree in Aerospace, Mechanical or similarExperience in Aerospace design / or Aerospace product development.Deep understanding of the full product lifecycle, design practices, manufacturing processes, and airworthiness requirements.Proven ability to lead complex engineering work packages and solve complex technical problems using evidence based, methodical approaches.Familiarity with digital engineering and model based design preferably using CATIA V5.Excellent communication skills, able to create clear, concise, and accurate technical content and present to senior stakeholders.Desirable:Expert user of CATIA V5 for complex modelling and drawing creationChartered Engineer status (CEng)Experience working with defence customers and regulatory authorities.Experience in transparencies, composites, or specialist structures/ systems.This is a hands on role, and the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You'll have strong leadership qualities with experience mentoring and developing engineering teams.You should be adaptable in your approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met.As Principal Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development.Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role.The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually).We offer:What We'll Offer Once youre on board youll get the following perks and benefits:Competitive salary dependent on experienceThe opportunity to earn up to 15% bonusIndustry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basisLife Assurance 8 x salary185 hours holiday + bank holidaysIncome protectionShopping discountsCycle To Work SchemeEmployee Assistance ProgrammeVirtual GP Clinic for you and immediate familyFree onsite parkingLocal gym discountFree airport parkingEnhanced family friendly leaveA collaborative, dynamic working environmentJoin us and keep the world moving click on the link below to applyA Great Place to work needs a Great Way of WorkingEveryone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?TPBN1_UKTJ

Company description:Fantastic challenges. Amazing opportunities.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career.Job description:Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines.Were recruiting a Quality Compliance Engineer to join our Quality Engineering team at our Luton manufacturing site, reporting directly to the Site Quality Manager.Working within a fast-paced aerospace manufacturing environment, you'll keep our Quality Management Systems (QMS) aligned to AS9100 and customer requirements, lead internal audits across the site, and help embed a culture where quality is owned by everyone. You'll have real visibility within the business, contributing to our daily Tier management structure and working closely with department heads and the site leadership team.Our Luton site operates core hours of 07:3016:30, Monday to Thursday, and 07:3012:30 on Fridays, giving you an early finish to start your weekend.Job Responsibilities Maintain the site Quality Management System (QMS), keeping documentation, processes and procedures current and audit-ready.Plan, schedule and lead the internal audit programme, reporting findings and driving timely closure of corrective actions.Support external certification and customer audits, acting as a key point of contact for AS9100 and regulatory compliance.Champion root cause analysis and effective corrective/preventive action (8D, RCCA) across the site.Analyse quality data and trends, and support continuous improvement and cost of poor quality (COPQ) reduction.Profile description:To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes:Essential:Experience in a quality systems, compliance or audit role within a regulated manufacturing environment (aerospace, defence, automotive or similar).Working knowledge of AS9100 / ISO 9001 and internal auditing principles.Strong analytical, problem-solving and stakeholder-management skills.Desirable:HNC/HND qualification (or equivalent experience) in an engineering discipline, preferably Mechanical, Electrical, Industrial engineering.A qualified internal auditor (or willingness to train); aerospace experience is a distinct advantage.We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Quality Compliance Engineer will demonstrate strong communication skills, using active listening, thoughtful inquiry, and clear articulation when engaging with diverse stakeholders. You'll build effective professional relationships across the business, supporting collaboration and shared understanding.With excellent analytical and critical-thinking abilities, you'll apply close attention to detail when working within complex systems, ensuring accuracy in identifying non-conformities and improvement opportunities. Confidently carry out critical evaluations of processes and designs, assessing effectiveness and highlighting areas for enhancement. Strong problem-solving skills and solid subject knowledge of requirements will support sound judgement and practical recommendations.The role requires effective note-taking, ensuring audit evidence and observations are captured accurately and transparently. The Quality Compliance Engineer will act with the highest level of integrity, maintaining impartiality, confidentiality, and professionalism at all times.With a mindset of adaptability and curiosity, remain open to new information, evolving requirements, and continuous improvementboth in own work and across the wider organisation.Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role.We offer:Once youre on board youll get the following perks and benefits: Competitive salary dependent on experienceIndustry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basisLife Assurance 8 x salary185 hours holiday + bank holidaysIncome protectionShopping discountsCycle To Work SchemeEmployee Assistance ProgrammeVirtual GP Clinic for you and immediate familyElectric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included)Free onsite parkingLocal gym discountFree airport parkingEnhanced family friendly leaveA collaborative, dynamic working environmentAs well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you!Join us and keep the world moving click on the link below to applyA Great Place to work needs a Great Way of WorkingEveryone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ??TPBN1_UKTJ

Quality EngineerLocation: DunstableSalary: £40,000 - £45,000Job Type: Permanent, Full-TimeWe are looking for an experienced Quality Engineer to join a Quality Assurance team within a busy industrial manufacturing environment.This is a hands-on Quality Engineer role supporting Production, Engineering and Manufacturing teams to maintain and continuously improve product quality, reliability and compliance. You will play a key role in ensuring components, sub-assemblies and finished products meet the required standards, while helping to prevent quality issues from progressing through the manufacturing process or reaching the customer.Key Responsibilities as a Quality EngineerSupport Production and Engineering teams with quality-related issues, investigations and improvement activities.Lead and support root cause investigations and corrective actions using tools such as 8D, Ishikawa, FMEA and Control Plans.Create, execute, review and report on product and process qualification testing.Monitor incoming and outgoing quality and identify opportunities for improvement.Raise and manage quality notifications/alerts when non-conformances are identified.Participate in the Material Review Board (MRB) process.Support fault finding and investigation of customer returns, working closely with Production, Engineering and R&D.Review and approve small process deviations and product concessions, ensuring these are appropriately documented.Review verification and validation activities for existing and new processes.Support continuous improvement initiatives to improve product quality and manufacturing processes.About You as a Quality EngineerA degree in Electrical or Mechanical Engineering , or equivalent relevant experience.Experience within aerospace, automotive or another highly regulated manufacturing environment would be advantageous.Practical engineering knowledge and a strong understanding of manufacturing processes.Experience using quality tools such as 8D, FMEA, Control Plans and Ishikawa/root cause analysis .Excellent communication and interpersonal skills, with the ability to work effectively with Production, Engineering, Sales, customers and suppliers .A proactive approach, with the confidence to identify issues, investigate root causes and drive improvements through to completion.The RoleThis is an excellent opportunity for a Quality Engineer to join a quality-focused manufacturing environment and have genuine influence over quality, manufacturing processes, compliance and continuous improvement .If you're a Quality Engineer looking for a hands-on role where you can make a tangible difference to manufacturing quality, we'd love to hear from you.TPBN1_UKTJ

Lift Service Engineer Luton Salary: Up to £50,000 Are you a Lift Service Engineer looking to take the next step in your career? If the answer is Yes, please read on.... We are a well-known and established Lift Service, Installation and Repair company. Due to our ever-growing lift service portfolio, we are looking for a Lift Service Engineer to cover Luton. Key Responsibilities of the successful Lift Service Engineer: \n\n • Management of your own lift service route in Luton \n, • Attend lift breakdowns and undertake planned servicing and maintenance work.\n, • Providing Service and PPM work at customer sites\n, • Provide technical support and advice to customers and maximise the first-time fix rate\n, • Maintain a professional image at all times as you’re a company ambassador on site\n, • Travelling throughout the coverage area\n\n Key requirements of the successful Lift Service Engineer: \n\n • NVQ Level 3 qualified in Lift Engineering\n, • 2 years of experience in a Lift Service / Maintenance Engineer position\n, • Relevant qualifications for the position, e.g. J Modules\n, • Proficient with fault finding, diagnosis and repair on either/both Passenger and Goods lifts\n, • Self-motivated, reliable, and organised\n, • Full UK driving licence and prepared to travel with the role\n\n If you are interested in this Lift Service Engineer opportunity, please use the application link indoth

Company description:Fantastic challenges. Amazing opportunities.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career.Job description:Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines.The Luton Engineering & Technology team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications.Were looking for a Senior Materials Engineer with a strong non-metallic materials engineering background, to join our materials and test team to support the production and development of next generation composite aero structures, ice protection and transparency products. The role will be based in the Materials and Test (M&T) team within the wider Engineering and Technology department and report to the Functional Team Leader.The role as a Senior Materials Engineer will support the business and engineering team, with non-metallic, polymer materials science and processing knowledge and guidance. Concentrating on thin film coating technologies and transparency materials. The role will initially lead a transparency coatings validation project before moving onto site production support and material obsolescence projects. The role will require a knowledge of the interactions between processing parameters and material properties of Acrylics, Polycarbonates and Polymers, being able to guide new technology test plans and current production deviations.You will support the work of the business to establish safe working practices and necessary level of documentation. You will be involved with projects from the planning / assembly / instrumentation / commissioning phase though to successfully performing and reporting the test. You will also be responsible for providing specialist support to existing programmes within your field of expertise, helping to resolve manufacturing issues and supporting continuous improvement efforts.You will have a proven track record of leading and delivering technical work, with strong communication skills being confident working with a broad range of internal and external stakeholders, including non-technical audiences.Job Responsibilities Development of manufacturing processes in relation to transparent polymer and adhesive materialsQualification of materials and processes to ensure they comply with the requirementsLead thin film polymer coatings projectsLead material obsolescence and REACh affected material replacement projectsInteract with different levels of leadership across the business, reporting progress to senior managers and site leadership team.Work closely with Principle Materials Engineer to effectively manage the Material Obsolescence processCollect inputs, related to a task and take it through an identified process to produce an output / deliverable adhering to quality and schedule requirements.Exemplifying a safety-first mind-set and ensuring compliance with the GKN Aerospace Health, Safety and Environmental policies and standards.Supporting production material related queries and issues, regarding re-life, testing and investigations.Developing, optimizing and maintaining specifications and handbooks related to non-metallic polymers; ensuring they are compliant with all relevant customer, regulatory, and airworthiness requirements.Preparing and defining tests/test plans; critical and systematic interpretation and analysis of test data, applying the outcome of tests for substantiation of specification changes.Defining activities in a project-oriented fashion with identification of deliverables, milestones and associated planning.Troubleshooting and production support on Materials Issues (e.g. Polymers and bonding).Interfacing with customers on a technical (M&T) level.Maintaining contacts with suppliers regarding alternative/new products.Integration into the wider, global engineering function, collaborating with other sites around the world.Contribute to the development of GKN as a 'great place to work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership.Profile description:To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes:Essential:Chemistry / Materials Science / aerospace engineering education, BSc / MSc levelKnowledge of / experience in Polymer material science and processingSignificant relevant experience within an industrial engineering discipline, preferably within an aerospace environmentExperience with quality systems, specifications, standards, etc., with the ability to oversee the broader fieldExcellent reporting and project management skills; Good command of the English language, both verbally and in writing,Team player at all levels in the company, pro-active attitude, but also capable of acting on an individual basis and reporting back to the relevant parties within GKN.Desirable:Ability to plan work through formal project management processes, to ensure successful delivery of required outcomes.You will have an awareness of aerospace certification requirements.Knowledge of / experience in Transparent thin film coatingsAs Senior Materials Engineer you should have a broad interest in Aerospace engineering with a high level of understanding in non-metallic material technologies & testing and characterisation techniques. Youll be able to adapt to changing priorities to meet business priorities handling multiple enquires at once. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal and external stakeholders, including operations and other business functions.The successful candidate should be adaptable in their approach to work, and be able to adapt to potentially dynamic priorities. As a Senior Materials Engineer, you will be naturally curious and seek to increase/deepen their own technical knowledge through study, collaborative working, hypothesis testing and experimentation.Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role.The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we will assess each case individually).We offer:Once youre on board youll get the following perks and benefits:Competitive salary dependent on experienceThe opportunity to earn up to 15% bonusIndustry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basisLife Assurance 8 x salary185 hours holiday + bank holidaysIncome protectionShopping discountsCycle To Work SchemeEmployee Assistance ProgrammeVirtual GP Clinic for you and immediate familyElectric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included)Free onsite parkingLocal gym discountFree airport parkingEnhanced family friendly leaveA collaborative, dynamic working environmentAs well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you!Join us and keep the world moving click on the link below to applyA Great Place to work needs a Great Way of WorkingEveryone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ??TPBN1_UKTJ

Role: Systems Engineer - Various Levels Location: Belfast, 3 days per week hybrid Salary: £50,000 - £70,000 SC eligible, clearance required to start Were looking for a technically strong Senior Systems Engineer who can work across the full engineering lifecycle, with particular focus on requirements, integration, verification, validation and qualification. This role suits someone who is hands-on, confident engaging with stakeholders, and comfortable working across hardware, software and firmware in a complex engineering environment. Youll be joining a business that values strong systems thinking, practical problem solving and clear communication. This is an opportunity to take ownership of technically challenging work and contribute to customer-facing programmes where quality, rigour and delivery matter. Key Responsibilities Work on the right-hand side of the V lifecycle, supporting integration, verification, validation and qualification activities. Capture, manage and mature requirements. Develop test documentation, test plans and test specifications. Execute integration and validation tests. Create and maintain VVRM documentation. Support acceptance activities and safety requirements. Your Background Strong experience with requirements management, system architecture, or integration and testing. Good understanding of verification, validation or certification processes. Experience with model-based engineering techniques, including MBSE, is desirable. Confident working across hardware, software or firmware. Degree or equivalent experience in an engineering discipline. Benefits Competitive salary up to £70k. 3 days per week hybrid in Belfast. Relocation support if needed. This is a role for a technically credible engineer who enjoys solving complex problems and delivering high-quality engineering outcomes in a demanding environment. TPBN1_UKTJ

We're looking for an Applications Engineer to become part of our experienced and supportive team. This is a varied role where no two days are the same. One day you could be proving out a brand-new machine for a customer, the next you'll be delivering operator training, developing machining strategies, or demonstrating the latest technology to customers and dealers. Do you have the right skills and experience for this role Read on to find out, and make your application. BASIC SALARY: £36,000 BENEFITS: · Bonus payments of up to £12k a year - as a result of the company carrying out services, machine sales and demonstrations · 25 days holiday plus bank holidays · Company car · Life insurance · Permanent Health insurance LOCATION: Watford COMMUTABLE LOCATIONS: Ruislip, Harrow, Barnet, Stanmore, Wembley, Luton, Hemel Hempstead, Potters Bar, Welwyn Garden City, Borehamwood, St Albans, Rickmansworth JOB DESCRIPTION: Applications Engineer - Industrial Machinery As our Applications Engineer, you'll play a key role in supporting customers throughout the entire lifecycle of their machines, ensuring they achieve the very best performance from their investment. Your responsibilities will include: · Visiting customer sites across the UK and Ireland to install, set up and prove our machines. · Delivering operator and engineer training for customers and dealer networks. · Developing machining methods, tooling strategies and CNC programs to solve customers' manufacturing challenges. · Supporting the sales team with technical demonstrations, time studies and machining solutions. · Carrying out machine demonstrations for customers and dealers, explaining machining processes in a clear and engaging way. · Installing machines in customer facilities and showrooms. · Testing and commissioning machines to ensure safe, reliable operation. · Providing telephone and on-site technical support for customers and dealers. · Learning new machine technologies and attending manufacturer training courses. · Supporting exhibitions, open days and customer events throughout the UK and Europe. PERSON SPECIFICATION: Applications Engineer - Industrial Machinery We're looking for an Applications Engineer who enjoys engineering just as much as they enjoy helping people. You'll ideally have: · Experience and a proven track record a similar position within CNC machinery or manufacturing. · Strong knowledge of metal cutting processes, tooling and machining methods. · The ability to develop complete manufacturing processes for finished components. · Excellent problem-solving skills and a practical engineering mindset. · Confidence communicating with customers, operators and colleagues. · The ability to work independently while also thriving as part of a collaborative engineering team. · A willingness to travel throughout the UK, Ireland and occasionally overseas. THE COMPANY: We are a world leading CNC machine tool manufacture supplying the latest CNC mill-turn technology to UK industry. We have been successfully serving UK manufacturing industry since 1974, famous also for our precision watches and electronics. Our products encompass our extensive range of high performance including sliding and fixed head CNC lathes. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. xrnqpay Please Note: Wallace Hind Selection have been chosen as the recruitment partner of our client. REF: AM18602, Wallace Hind Selection

Lead Hardware Engineer Luton | 4 Days Onsite Per Week 12-Month Contract £65 per Hour (Inside IR35) Active SC Clearance Required Winsearch is currently recruiting for a Lead Hardware Engineer to join a leading defence engineering organisation delivering advanced Electronic Warfare and Defensive Aids Systems across air, land and maritime platforms. This is an exciting opportunity to work on technically challenging programmes at the forefront of defence technology, developing mission-critical hardware that supports some of the world's most advanced military platforms. Working within a multidisciplinary engineering environment, you'll contribute throughout the entire product lifecycle, from requirements capture and architecture definition through to integration, qualification and customer acceptance. The Role As a Lead Hardware Engineer, you'll take a key role in the design and development of complex digital and mixed-signal electronics for high-performance defence applications. You'll work closely with systems, firmware, software and RF engineering teams to develop robust hardware solutions capable of operating in demanding environments. Key Responsibilities • Design and develop advanced digital and mixed-signal hardware., • Define hardware architectures for FPGA, SoC and processor-based systems., • Create schematics and support PCB layout activities for high-speed designs., • Develop and verify interfaces including DDR memory, PCIe and Ethernet., • Integrate hardware, firmware and software into complete system solutions., • Perform simulation, verification and validation activities., • Support board-level bring-up, debugging and fault investigation., • Collaborate with cross-functional engineering teams across the product lifecycle., • Support environmental, EMC and qualification testing., • Produce technical documentation and engineering evidence to support programme delivery., • Support customer demonstrations, trials and acceptance activities. Skills & Experience We're keen to hear from engineers with experience in high-speed digital electronics design gained within defence, aerospace or other highly regulated industries. Essential • Strong background in FPGA and SoC-based hardware architectures., • Experience designing complex multilayer PCB assemblies., • Knowledge of high-speed serial interfaces, processors and memory subsystems., • Experience with tools such as Altium Designer, OrCAD, Xpedition or equivalent., • Practical hardware debugging and fault-finding experience using industry-standard test equipment., • Understanding of signal integrity, power integrity and timing considerations., • Experience integrating hardware, firmware and software within embedded systems., • Ability to translate system requirements into effective hardware solutions., • Experience supporting verification, validation and qualification activities. Desirable • Electronic Warfare, Radar, RF, Communications or Sensor Systems experience., • Safety-critical or mission-critical product development., • FPGA signal processing architectures., • Knowledge of aerospace and defence standards including DO-254, DEF STAN or MIL-STD., • Experience leading technical reviews and mentoring engineers., • Design for Manufacture, Design for Test and Design for Reliability methodologies. Requirements • Active SC Clearance., • Sole British National status due to programme security requirements., • Strong communication skills and the ability to work effectively within multidisciplinary teams. What's on Offer? • £65 per hour (Inside IR35), • Initial 12-month contract, • Hybrid working with four days per week onsite in Luton, • Work on cutting-edge Electronic Warfare and Defence programmes, • Exposure to advanced technologies and complex engineering challenges, • Collaborative environment with experienced engineering specialists If you're looking for a contract opportunity where you can contribute to the development of next-generation defence technology, we'd love to hear from you. Apply today or contact Winsearch for a confidential discussion. INDWIN Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https:// Many Thanks JBRP1_UKTJ

Fuel your future with AO – and unlock serious earning potential. We're all about making work, work for you. With a shift pattern designed for real life, you'll have the flexibility you need to keep everything in balance. As one of our Gas Engineers, you'll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on. And the best bit? The rewards. You can earn: Up to £2,000 in performance bonuses A £2,000 welcome bonus just for joining the team Plus, the chance to boost your earnings with overtime averaging up to £3,000 a year It's everything you need to power your career forward, with a team that's got your back every step of the way. Here's What You Can Expect To Be Doing As Our Gas Installations Engineer: As an AO Gas Engineer, you'll head out on the road with one of our drivers, visiting customers in their homes and bringing their appliances to life. You'll be installing gas and electrical products safely and efficiently — no repairs, no guesswork. Just high-quality installs and top-notch customer service, every single time A Few Things About You: You'll need to have: A full UK driving licence with no more than 6 points CCN1 & CKR1 qualifications To be over 21 for insurance purposes At least 1 years' experience in gas installations It'd be great if you also have: Some experience installing electrical appliances (but don't worry — we'll give you all the training you need to get up to speed) Our Benefits: What's in it for you At AO, we've designed our benefits to make life easier, inside and outside of work: A 4 on, 4 off shift pattern with 24 days holiday — you'll work less than half the year. A company van with fuel paid for, so you're ready to go from day one. On-call support from our expert technical team whenever you need it. Access to fantastic training facilities with ongoing development opportunities. A competitive pension scheme. Plus, a great range of everyday perks: Simply Health cash plan to help cover healthcare costs Help at Hand — access to a 24/7 GP and wellbeing support The option to buy extra holidays for even more flexibility A cycle to work scheme to support a healthier commute Wage stream access, putting you in control of your money every step of the way — access your earnings when you need them, not just on payday Exclusive ticket access to AO Arena, Sale Sharks and Manchester Thunder And that's not all — there's plenty more to discover when you join the team Click ‘Apply' now to join our family and find out more about the Gas Installations Engineer role. TPBN1_UKTJ

Field Service Engineer (Packaging Machinery) £40,000 - £47,000 + Training + Progression + Company Vehicle + Fuel Coverage + Personal Use + 25 Days Holiday + Bank Holidays + Life Insurance *Full Manufacturer Training in Italy* Luton Are you a Field Service Engineer, with a mechanical and electrical background, looking to join a growing manufacturer of specialist packaging machinery? On offer is the opportunity to join a UK market-leading supplier of liquid filling and capping machinery. The company designs, manufactures, installs and supports packaging equipment for the cosmetic, personal Care, pharmaceutical and healthcare industries. You will provide installation, servicing, maintenance and breakdown support on specialist packaging machinery at customer sites across the UK. Occasionally, you will travel to machine suppliers over in Italy. The role will involve diagnosing mechanical, electrical, pneumatic and control-system faults, as well as installing, commissioning and upgrading equipment. This role would suit a multi-skilled Field Service Engineer looking for long-term career development within a specialist engineering environment. The Role Carry out planned preventative maintenance, servicing and repairs on packaging machinery Diagnose and fault-find mechanical, electrical, pneumatic and control-system issues Install, commission and set up new packaging machinery Attending customer sites across the UK, with 1-2 nights away per week and occasional travel to Italy Complete service reports, maintenance records and testing documentation Monday to Friday The Person Experience working as Field Service Engineer Qualification in Mechanical or Electrical Engineering Full UK driving license If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH26905 Keywords: Service Engineer, Field Service Engineer, Packaging Machinery, Filling Machinery, Capping Machinery, Mechanical Engineering, Electrical Engineering, Fault Finding, Preventative Maintenance, PPM, Breakdown Support, Installation, Commissioning, Machinery Upgrades, Machinery Refurbishment, Pneumatics, Control Systems, Process Machinery, Packaging Equipment, Customer Service, Technical Support, Operator Training, Service Reports, UK Travel, Full UK Driving Licence We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Fuel your future with AO – and unlock serious earning potential. We're all about making work, work for you. With a shift pattern designed for real life, you'll have the flexibility you need to keep everything in balance. As one of our Gas Engineers, you'll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on. And the best bit? The rewards. You can earn: Up to £2,000 in performance bonuses A £2,000 welcome bonus just for joining the team Plus, the chance to boost your earnings with overtime averaging up to £3,000 a year It's everything you need to power your career forward, with a team that's got your back every step of the way. Here's What You Can Expect To Be Doing As Our Gas Installations Engineer: As an AO Gas Engineer, you'll head out on the road with one of our drivers, visiting customers in their homes and bringing their appliances to life. You'll be installing gas and electrical products safely and efficiently — no repairs, no guesswork. Just high-quality installs and top-notch customer service, every single time A Few Things About You: You'll need to have: A full UK driving licence with no more than 6 points CCN1 & CKR1 qualifications To be over 21 for insurance purposes At least 1 years' experience in gas installations It'd be great if you also have: Some experience installing electrical appliances (but don't worry — we'll give you all the training you need to get up to speed) Our Benefits: What's in it for you At AO, we've designed our benefits to make life easier, inside and outside of work: A 4 on, 4 off shift pattern with 24 days holiday — you'll work less than half the year. A company van with fuel paid for, so you're ready to go from day one. On-call support from our expert technical team whenever you need it. Access to fantastic training facilities with ongoing development opportunities. A competitive pension scheme. Plus, a great range of everyday perks: Simply Health cash plan to help cover healthcare costs Help at Hand — access to a 24/7 GP and wellbeing support The option to buy extra holidays for even more flexibility A cycle to work scheme to support a healthier commute Wage stream access, putting you in control of your money every step of the way — access your earnings when you need them, not just on payday Exclusive ticket access to AO Arena, Sale Sharks and Manchester Thunder And that's not all — there's plenty more to discover when you join the team Click ‘Apply' now to join our family and find out more about the Gas Installations Engineer role. TPBN1_UKTJ

Description Join us, be part of more. We're so much more than an energy company. We're a family of brands revolutionising how we power the planet. We're energisers. One team of 21,000 colleagues that's energising a greener, fairer future by creating an energy system that doesn't rely on fossil fuels whilst living our powerful commitment to igniting positive change in our communities. Here, you can find more purpose, more passion, and more potential. That's why working here is #MoreThanACareer. We do energy differently - we do it all. We make it, store it, move it, sell it, and mend it. About your team: At British Gas, our mission is to sell it and mend it. We've been powering the UK's homes and businesses for over 200 years - but supplying energy is just part of what we do. We're making the UK greener and more energy efficient, getting closer to Net Zero. By using clever tech like thermostats, heat pumps, solar panels and EV chargers, we're making it cheaper and easier for our customers to reduce their carbon-footprint. At British Gas, our engineers are at the heart of what we do. Every day, customers invite us into their homes because they trust us to put things right, quickly, safely and professionally. We're now looking for experienced White Goods Engineers (Contractors) to work alongside our established engineering community and help us deliver on our British Gas Service Promise , including our commitment to same-day fixes wherever possible. This is a great opportunity for skilled, customer-focused engineers who take pride in their work and want consistent, flexible contractor work with one of the UK's most recognised service brands. The Role As a contractor White Goods Engineer supporting British Gas, you'll attend customers' homes to diagnose, repair and maintain a wide range of kitchen and white goods appliances . You'll be trusted to work independently in the field, representing the British Gas brand in customers' homes, while having access to strong operational, managerial and technical support when you need it. Some repairs can be complex, so confidence, experience and a calm, professional approach are essential. Typical appliances you'll work on, will be Washing machines, Tumble dryers, Dishwashers, Refrigeration & Microwaves Why Work With British Gas? Consistent volumes of work with a trusted household name Competitive contractor rates - DOE Local work allocation where possible Structured job flow and scheduling support Access to technical guidance and field support when required Opportunity for ongoing, long-term contractor engagement What We're Looking For At least 2 years' proven, hands-on experience repairing white goods appliances Broad technical knowledge across multiple appliance types Strong fault-finding and diagnostic capability Excellent customer service skills - you understand that how you fix matters as much as what you fix A commitment to safe working and first-time-fix outcomes Pride in your workmanship and professionalism in customers' homes Contractor Essentials Self-employed / contractor status Your own tools and test equipment appropriate for white goods repair Full UK driving licence and access to a suitable vehicle Relevant insurances (e.g. Public Liability) If you're an experienced White Goods Engineer who takes pride in delivering great service and wants the backing of a brand customers know and trust, we'd love to hear from you. Why should you apply? We're not a perfect place - but we're a people place. Our priority is supporting all of the different realities our people face. Life is about so much more than work. We get it. That's why we've designed our total rewards to give you the flexibility to choose what you need, when you need it, making sure that you and your family are supported not only financially, but physically and emotionally too. Visit the link below to discover why we're a great place to work and what being part of more means for you. https://www.morethanacareer.energy/britishgas If you're full of energy, fired up about sustainability, and ready to craft not only a better tomorrow, but a better you, then come and find your purpose in a team where your voice matters, your growth is non-negotiable, and your ambitions are our priority. Help us, help you. We would love for you to share any information about yourself throughout our recruitment process so that we can better understand you and help shape your journey. TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a Senior Systems Engineer (Electronics) you will draw on your diverse engineering background and the product lifecycle awareness to work on a variety of research activities in the TRL1-6 range. You must have sound experience in leading technical work, including budgeting, schedule and risk management. You will be capable of achieving through others internally and externally, and you will be committed to development of your own skills and professional network. Your proactive nature will enable you to understand and adapt to new technology areas quickly. The Luton team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems and specialist structures for both civil and defence applications. The areas of activity cover but is not limited to: Electro-thermal systems and Electro-mechanical systems, Specialist materials and coating systems, Embedded and structural composites, Aircraft transparencies, Icing modelling and analysis, Sensing and data acquisition, Electrical and software control systems and digital engineering / manufacturing. This role is to provide analysis and design data to support ice protection system design through modelling and simulation of in-flight icing behaviour of aircraft surfaces, or representative surfaces. It is further expected that the role holder develop an in-depth understanding of the icing wind tunnel facility capabilities, and provide consultation and support to customers and other third party users ensuring testing is conducted in line with relevant standards and specifications and contributing to test reports as required. This expertise is to be developed through understanding icing physics and aircraft ice protection philosophies (particularly electrothermal), and through practical experimentation and modelling verification using the research icing wind tunnel.The successful candidate should have a broad engineering knowledge base but have a desire to specialise and in time develop the in depth knowledge to become a subject matter expert in icing analysis and testing, being able to support next generation ice protection system designs. We are seeking someone adaptable in their approach to work, and be willing to understudy other team members in their areas of expertise to ensure project objectives are met. As a Senior Systems Engineer (Electronics), you will be naturally curious and seek to increase/deepen your own technical knowledge through study, collaborative working, hypothesis testing and experimentation. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. The role requires flexibility for occassional national travel to meet with customer and we offer the opportunity to work from home up to two days per week dependent on business need. Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied. You may have budget accountability for a Work Stream or Work Package Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives. Support or lead the design of external work packages to be carried out by third parties in order to meet project research objectives. Responsible for accurately capturing and recording data and results from test work and development trials. Responsible for raising and issuing high quality and detailed technical documentation. Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s) Responsible for preparation of Technology Development Plans and Technology Business Cases within your project(s) Ensure all planning documentation in your responsibility is regularly updated, accurate, and delivery is on track. You may also have schedule accountability for your project(s) Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead. Drive project(s) toward exploitation, identifying and supporting industrialisation scenario development. Support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases. Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: HNC, degree or equivalent experience in electrical or systems engineering Experience delivering designs for electro-mechanical, sensing OR controller systems within an engineering environment Electronics pcb design experience Good general engineering/technology knowledge base and can demonstrate strategic thinking. Working knowledge of aerodynamics and an appreciation of physics based modelling approaches for thermodynamic analysis. Experience of test/experimental design, and practical execution in laboratory or test facility conditions to defined standards, and be able to contribute to the development of new test methods. Strong self-starter, able to execute tasks according to plan. Logical and methodical approach to task planning. Experience managing deployed resources (people you lead but you are not their line manager). Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetings. Desirable: A higher degree qualification such as a Masters, PhD or EngD General awareness of budget and schedule management. An awareness of aerospace certification requirements. Experience of the Systems Development Lifecycle process You will be developing your own network and you will have a general awareness of key companies and key individuals who operate in the wider aerospace technology and engineering field We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

TRS Consulting in the United Kingdom is recruiting a Field Service Engineer for MRI medical imaging. The ideal candidate has field service or technical support experience in medical imaging, strong MRI repair skills, ONC or HNC in electronics, and excellent customer-facing manner.

Lead Hardware Engineer Luton | 4 Days Onsite Per Week 12-Month Contract £65 per Hour (Inside IR35) Active SC Clearance Required Winsearch is currently recruiting for a Lead Hardware Engineer to join a leading defence engineering organisation delivering advanced Electronic Warfare and Defensive Aids Systems across air, land and maritime platforms. This is an exciting opportunity to work on technically challenging programmes at the forefront of defence technology, developing mission-critical hardware that supports some of the world's most advanced military platforms. Working within a multidisciplinary engineering environment, you'll contribute throughout the entire product lifecycle, from requirements capture and architecture definition through to integration, qualification and customer acceptance. The Role As a Lead Hardware Engineer, you'll take a key role in the design and development of complex digital and mixed-signal electronics for high-performance defence applications. You'll work closely with systems, firmware, software and RF engineering teams to develop robust hardware solutions capable of operating in demanding environments. Key Responsibilities Design and develop advanced digital and mixed-signal hardware. Define hardware architectures for FPGA, SoC and processor-based systems. Create schematics and support PCB layout activities for high-speed designs. Develop and verify interfaces including DDR memory, PCIe and Ethernet. Integrate hardware, firmware and software into complete system solutions. Perform simulation, verification and validation activities. Support board-level bring-up, debugging and fault investigation. Collaborate with cross-functional engineering teams across the product lifecycle. Support environmental, EMC and qualification testing. Produce technical documentation and engineering evidence to support programme delivery. Support customer demonstrations, trials and acceptance activities. Skills & Experience We're keen to hear from engineers with experience in high-speed digital electronics design gained within defence, aerospace or other highly regulated industries. Essential Strong background in FPGA and SoC-based hardware architectures. Experience designing complex multilayer PCB assemblies. Knowledge of high-speed serial interfaces, processors and memory subsystems. Experience with tools such as Altium Designer, OrCAD, Xpedition or equivalent. Practical hardware debugging and fault-finding experience using industry-standard test equipment. Understanding of signal integrity, power integrity and timing considerations. Experience integrating hardware, firmware and software within embedded systems. Ability to translate system requirements into effective hardware solutions. Experience supporting verification, validation and qualification activities. Desirable Electronic Warfare, Radar, RF, Communications or Sensor Systems experience. Safety-critical or mission-critical product development. FPGA signal processing architectures. Knowledge of aerospace and defence standards including DO-254, DEF STAN or MIL-STD. Experience leading technical reviews and mentoring engineers. Design for Manufacture, Design for Test and Design for Reliability methodologies. Requirements Active SC Clearance. Sole British National status due to programme security requirements. Strong communication skills and the ability to work effectively within multidisciplinary teams. What's on Offer? £65 per hour (Inside IR35) Initial 12-month contract Hybrid working with four days per week onsite in Luton Work on cutting-edge Electronic Warfare and Defence programmes Exposure to advanced technologies and complex engineering challenges Collaborative environment with experienced engineering specialists If you're looking for a contract opportunity where you can contribute to the development of next-generation defence technology, we'd love to hear from you. Apply today or contact Winsearch for a confidential discussion. INDWIN Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed) /> Many Thanks

Senior Electronics Design Engineer Location: Luton, Bedfordshire / Remote Hours: Monday to Friday Salary: Competitive, depending on experience We are seeking an experienced Senior Electronics Design Engineer to join an innovative electronics design and manufacturing business. This is a hands-on role, designing complex hardware solutions for major OEM customers across sectors including Automotive, Defence & Aerospace, Medical, Communications, Clean Energy and Space. The successful candidate will take ownership of designs from concept through to production, working closely with multidisciplinary engineering teams and customers. Key Responsibilities as a Senior Electronics Design Engineer Design electronic hardware from concept through to production Circuit design, component selection, simulation and analysis Work with PCB layout engineers and review layouts Board bring-up, testing, measurement and fault finding Support EMC, validation, compliance and qualification Produce technical specifications, reports and test documentation Participate in design reviews and customer meetings Identify technical risks and manage project timescales Provide technical support and mentoring to other engineersSkills & Experience Required for an Senior Electronics Design Engineer Strong commercial experience in electronics hardware design Proven experience taking designs from concept through to production Mixed analogue and digital design with microcontrollers Schematic capture experience, ideally Altium Confident working in a laboratory environment Experience with PCB layout and design constraints Strong analytical, problem-solving and technical writing skills Experience with FMEA, validation and approvals Able to work independently with minimal supervision Eligible to obtain UK Security Clearance (SC) Full UK driving licenceDesirable Switched Mode Power Supply Design EMC experience CAN, Ethernet, RS485 and USB Signal and Power Integrity Embedded programming awareness Experience working across multiple clients/projects Previous UK Security ClearanceWhat's on offer for a Senior Electronics Design Engineer Competitive salary 25 days' holiday plus bank holidays Hybrid / remote working Company pension Free parking BUPA healthcare after probation Life InsuranceApply now or contact Mia Gandolfo at ProTech Recruitment in Hemel Hempstead

Plumbing & Heating Engineer – Luton – Ongoing- Price Work Plumbing & Heating Engineer – Engineer Package Overview: • Self employed Subcontractor Contract, • Monday to Friday, • Price Work, • Additional earning potential Company Overview – Plumbing & Heating Engineer Our client, a successful and fast-growing company are currently on the lookout for multiple plumbing and heating engineers to help them keep up with customer demand. This is a fantastic opportunity within a supportive and fun environment. You will be given support, training and the correct tools to carry out your role efficiently and effectively. This Company value their team and understand the importance of a good work life balance in order to maintain job satisfaction and staff retention. You will have a number of opportunities available to you and ideally you will be someone who will take full advantage of these. The work load within this company is carefully planned and allocated to ensure maximum efficiency. Team skill set, experience and individual location is carefully considered. Plumbing & Heating Engineer – Role and Responsibilities: · Install, repair, and maintain plumbing and heating systems in residential and commercial buildings · Plumbing works · Diagnose and troubleshoot · Perform routine maintenance tasks · Bathrooms mainly Tiling skills desirable · Take responsibility for the overall quality of the work delivered on-site · Ensure the company meets its obligations and adheres to guidelines and regulations · Work closely with other engineers and provide support and training to more junior members of the team Plumbing & Heating Engineer – Skills and Experience: • A full UK driving licence or equivalent (Essential), • A drive and enthusiasm to grab hold of opportunities, • A positive attitude and the ability to self-motivate is a must, • Proficiency in using hand tools and welding equipment, • A minimum of 2 years’ previous experience within a similar role, • CSCS Preferred, • City & Guilds DON'T MISS OUT ON THIS GREAT OPPORTUNITY - APPLY NOW Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful

Fuel your future with AO – and unlock serious earning potential. We’re all about making work, work for you. With a shift pattern designed for real life, you’ll have the flexibility you need to keep everything in balance. As one of our Gas Engineers, you’ll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on. And the best bit? The rewards. You can earn: Up to £2,000 in performance bonuses A £2,000 welcome bonus just for joining the team Plus, the chance to boost your earnings with overtime averaging up to £3,000 a year It’s everything you need to power your career forward, with a team that’s got your back every step of the way. Here's What You Can Expect To Be Doing As Our Gas Installations Engineer: As an AO Gas Engineer, you’ll head out on the road with one of our drivers, visiting customers in their homes and bringing their appliances to life. You’ll be installing gas and electrical products safely and efficiently — no repairs, no guesswork. Just high-quality installs and top-notch customer service, every single time A Few Things About You: You’ll need to have: A full UK driving licence with no more than 6 points CCN1 & CKR1 qualifications To be over 21 for insurance purposes At least 1 years’ experience in gas installations It’d be great if you also have: Some experience installing electrical appliances (but don’t worry — we’ll give you all the training you need to get up to speed) Our Benefits: What’s in it for you At AO, we’ve designed our benefits to make life easier, inside and outside of work: A 4 on, 4 off shift pattern with 24 days holiday — you’ll work less than half the year. A company van with fuel paid for, so you’re ready to go from day one. On-call support from our expert technical team whenever you need it. Access to fantastic training facilities with ongoing development opportunities. A competitive pension scheme. Plus, a great range of everyday perks: Simply Health cash plan to help cover healthcare costs Help at Hand — access to a 24/7 GP and wellbeing support The option to buy extra holidays for even more flexibility A cycle to work scheme to support a healthier commute Wage stream access, putting you in control of your money every step of the way — access your earnings when you need them, not just on payday Exclusive ticket access to AO Arena, Sale Sharks and Manchester Thunder And that’s not all — there’s plenty more to discover when you join the team Click ‘Apply’ now to join our family and find out more about the Gas Installations Engineer role

Quality Engineer Luton 6-Month Contract Paying up to £37p/h (Inside IR35) Key Responsibilities Act as the Quality focal point for in-service and returns material activities Support investigation and resolution of non-conformances, including root cause analysis and corrective actions Review and approve quality documentation related to returns, concessions, and repair activities Ensure effective traceability and configuration control of returned and unserviceable items Interface with internal stakeholders (Engineering, Supply Chain, and Operations) and external suppliers Ensure compliance with AS9100, Quality Management System, and customer contractual requirements Contribute to continuous improvement activities across in-service quality processes Deliver compliant products in a timely manner, meeting all cost and safety requirements Provide reports and supporting data to the Programme, Project, and functional teams Required Experience Further education and/or experience in Engineering, Quality, Manufacturing, or a similar discipline within Defence Electronics or a comparably complex industry Demonstrated knowledge of AS9100 / ISO9001 and Continuous Improvement principles Experience with Quality tools such as Root Cause Corrective Action, Pattern Fault Lifecycle, Verification, etc. Logical thinker, capable of turning complex data into practical, actionable solutions aligned with business goals Strong interpersonal skills with a collaborative working style across all functions Excellent analytical skills and attention to detail Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Service Contracts Manager Location: Field Based (UK Travel Required) Reports To: Regional Service Manager About the Role We are seeking an experienced and commercially focused Service Contracts Manager to be responsible for the effective management and retention of service contracts and key customer accounts within a defined region. The successful candidate will maximise contract revenue and profitability through strong account management, operational collaboration, contract governance, and customer relationship management. This role requires close partnership with service, sales, finance, and operational teams to ensure contractual commitments are delivered successfully while identifying opportunities for business growth. Key Responsibilities Contract & Account Management Develop and maintain key account plans to maximise the value and growth potential of contracted accounts. Build and maintain strong relationships with key customer stakeholders. Act as the primary point of contact for contract reviews and service provision changes. Monitor contract performance against agreed service level agreements (SLAs). Ensure high levels of customer satisfaction and service delivery excellence. Identify opportunities to expand products and services within existing accounts. Commercial & Financial Management Manage the retention and renewal of service contracts. Ensure accurate capture and invoicing of all contracted activities. Implement annual contract price increases where applicable. Provide accurate revenue forecasts on a weekly, monthly, quarterly, and annual basis. Work closely with finance teams to resolve invoicing and credit control matters. Analyse contract performance, commercial trends, and profitability. Operational Coordination Collaborate with regional service and operational teams to ensure efficient contract delivery. Facilitate effective communication between service, sales, administration, and finance teams. Ensure all contract implementation and setup documentation is completed accurately. Maintain up-to-date contract records within company systems. Support timely contract renewals and amendments. Reporting & Analysis Produce management information and performance reports for contracted customers. Generate account analysis and business reports for internal stakeholders. Utilise business systems and reporting tools to extract and analyse data. Investigate and explain variances relating to service delivery, compliance, and financial performance. Skills & Experience Essential Commercial and service management experience within a healthcare or medical services environment. Strong contract management and account management experience. Excellent organisational and planning skills. Strong analytical and problem-solving capabilities. Experience interpreting operational and financial performance data. Excellent communication and relationship-building skills. Advanced Microsoft Office skills, including: Excel Word PowerPoint Outlook Teams Ability to work effectively with multiple stakeholders across different functions. Desirable Qualified Engineer or technical background. Experience negotiating service contracts and commercial agreements. Experience presenting management information and performance data to customers and senior stakeholders. Key Competencies Influencing & Negotiation Builds credibility and trust with customers and colleagues. Gains commitment through effective persuasion and negotiation. Promotes solutions and recommendations confidently. Influences stakeholders at multiple levels. Analysis & Communication Produces clear, concise, and professional written communication. Presents information in a structured and logical manner. Tailors communication style to suit different audiences. Explains complex information clearly and effectively. Presentation Skills Confident presenter with strong communication skills. Able to engage audiences and respond effectively to feedback. Delivers presentations professionally and credibly. Planning & Organisation Prioritises workload effectively. Plans activities and projects in advance. Meets deadlines and manages competing priorities. Organises resources to achieve business objectives. Adaptability Responds positively to change. Adapts working style to different situations and stakeholders. Demonstrates resilience and flexibility. Embraces new ideas and continuous improvement initiatives. This is an excellent opportunity for a commercially minded service professional with strong contract management experience to play a key role in driving customer retention, service excellence, and business growth. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website

Telecoms Fibre Engineer / FTTP Engineer Pro Search UK are hiring experienced and semi experienced FTTP Engineers / Fibre engineers. Start date of Telecoms Fibre Engineer / FTTP Engineer • Immediately Pay of Telecoms Fibre Engineer / FTTP Engineer • Telecoms fibre engineer will be working from a rate card, If you work hard and put in the effort there is no cap on their earnings. Job Description of Telecoms Fibre Engineer / FTTP Engineer : • Completing Fibre Installations, • Overhead / Underground jobs, • Completing Fibre Surveying / Repairing Orders, • You will be given full and continuous training in this role, and support throughout your working day., • Site Inspection Evaluations Including, Traffic Management to be conducted, • Respond professionally and effectively to all customer requests and enquiries Key Requirements of Telecoms Fibre Engineer / FTTP Engineer : • Full UK driver's license with no more than 6 points on., • Previous FTTP / Fibre / FTTH experience Induction for Telecoms Fibre Engineer / FTTP Engineer : • If you are successful in your application, you first day of engagement will be at one of our national training centres to complete your induction into the job role. Telecom Fibre Engineer / FTTP Engineer physical requirements: • The ability to lift objects regularly -The ability to safely climb ladders • The ability to bend and stretch with comfort, • The ability to wear personal protective gear correctly most of the day Got a friend? apply together and work in the same team as we have duo and solo work available

Workshop Foreman – Heavy Plant Harpenden £40,000-£50,000 + Overtime The Role We're working with a well-established and highly respected plant hire business with a strong UK presence. They've built a strong reputation for investing in their fleet and engineers, and due to continued growth, they're looking to bring an experienced Workshop Foreman to lead the day-to-day running of its busy Harpenden workshop. This is a hands-on leadership role where you'll be responsible for maintaining a modern fleet of construction plant, ensuring high standards of workmanship, supporting engineers and helping the depot operate efficiently. You'll split your time between carrying out repairs yourself and supervising the workshop team, ensuring machines are prepared, serviced and repaired to the highest standard while maintaining a safe and productive working environment. Key Responsibilities Lead and supervise the workshop engineering team. Carry out servicing, maintenance, diagnostics and repairs on a wide range of heavy plant equipment. Allocate workloads and ensure jobs are completed safely, efficiently and to a high standard. Support engineers with technical fault finding and complex repairs. Ensure all PDI inspections, LOLER requirements (where applicable) and machine preparation are completed. Liaise with the Depot Manager regarding workshop priorities, machine availability and customer requirements. Maintain accurate service records and job documentation. Ensure the workshop is kept clean, organised and compliant with all Health & Safety procedures. Identify training and development needs within the engineering team. Assist with parts requirements and workshop stock management when required. The Ideal Candidate Previous experience as a Workshop Foreman, Chargehand, Lead Engineer or Senior Heavy Plant Engineer. Strong background servicing and repairing heavy construction plant. Excellent diagnostic and fault-finding ability across hydraulic, electrical and mechanical systems. Experience leading or mentoring engineers in a workshop environment. Good organisational and communication skills. NVQ Level 3 (or equivalent) in Plant Maintenance, Heavy Vehicle or Agricultural Engineering is desirable. Full UK Driving Licence. Typical Equipment Experience on manufacturers such as: JCB Caterpillar (CAT) Komatsu Hitachi Volvo CE Doosan / Develon Takeuchi Kubota Mecalac Thwaites Bomag Hamm Ammann Wacker Neuson SANY Hyundai Excavators Dumpers Rollers Telehandlers Loading Shovels Compaction Equipment What's on Offer Competitive salary. Overtime opportunities. Company pension. Ongoing manufacturer and technical training. Long-term career progression with one of the UK's leading plant hire businesses. Stable, well-established employer with a strong reputation within the construction plant industry. If you're a Foreman in or around Harpenden looking for a solid opportunity with good earning potential — get in touch. Call NEOS Engineering Recruitment Apply now and we'll be in touch TPBN1_UKTJ

Do you excel at diagnosing complex refrigeration issues and enjoy being the trusted expert for your customers? Our client, a leading global HVAC & Refrigeration company is looking for a skilled Refrigeration Engineer to deliver high-quality, reliable support to their customers. This is a fantastic role for someone who enjoys building relationships and using the latest diagnostic technology to solve complex problems in a field-based position. On Offer: • Base salary of up to £48,000 per annum with an OTE of £65,000+, • Company van & door to door payment, • Private Medical Insurance, • Company bonus, • Death in service, • Enhanced pension, • 25 days holiday + bank holidays and option to purchase additional days, • Fantastic career progression opportunities Key Responsibilities: • Diagnose and repair faults on a wide range of commercial and industrial plants and equipment using cutting-edge diagnostic tools., • Carry out planned preventative maintenance, emergency breakdown repairs and commissioning work on customer sites., • Act as the main point of contact for your customers, building trusted, long-term relationships., • Participating in an on-call rota Who They’re Looking For: • Proven experience as a field-based Service Technician or Refrigeration Engineer., • Excellent communication and customer service skills, with the ability to build rapport., • Strong diagnostic and problem-solving abilities., • Confidence using diagnostic software, mobile apps and MS Office., • NVQ L2 in Refrigeration and Air Conditioning or equivalent industry related qualification, • A valid F-Gas certification (or equivalent)., • A full UK driving licence and the right to work in the UK. If you're a skilled Refrigeration Engineer with proven field experience and excellent communication skills, this is an excellent opportunity to advance your career with a company that prioritises career development

Network Engineer - Managed Services Up to £65,000 Per Annum We're looking for an experienced Network Engineer to join a highly skilled NOC team within a leading technology solutions provider. You'll support a diverse customer base across sectors including finance, manufacturing, utilities and retail, working across networking, infrastructure, cloud, virtualisation and security. The Role Provide technical support across complex customer environments and managed services. Troubleshoot and resolve network and infrastructure incidents. Contribute to solution design, HLD/LLD, implementations and technical projects. Act as a technical escalation point and subject matter expert. Work within an ITIL-based service environment, supporting SLAs, KPIs and change/problem management. Participate in a 24/7 on-call rota. Build strong customer relationships and deliver a high level of technical service. Occasionally travel to customer sites, data centres and offices in Milton Keynes/Watford. Key Skills We're looking for experience across several of the following: Cisco / CCNP-level networking & Nexus switching Cisco ASA/Firepower Fortinet, Check Point or Palo Alto firewalls AWS and/or Azure Windows/Linux servers VMware ESXi/vSAN Load balancing and network monitoring Defender / Sentinel / SIEM HLD/LLD documentation ITIL, incident/change/problem management About You You'll be a proactive, self-motivated Network Engineer with: Strong troubleshooting and problem-solving skills Excellent communication and customer-facing ability The confidence to work independently and take ownership A resilient, can-do attitude Relevant networking qualifications, ideally CCNP or equivalentThis is a great opportunity to work across a broad technology landscape, gain exposure to complex enterprise environments and develop your career within a technically strong managed services team. Spectrum IT Recruitment (South) Limited is acting as an Employment Agency in relation to this vacancy

The Role We are currently recruiting for an experienced Senior Electronics Design Engineer to join an established engineering and technology business delivering bespoke electronic solutions for a range of OEM customers. This is a hands-on design position focused on technically challenging hardware projects. The successful candidate will take ownership of designs from initial concept through to a proven, manufacturable product, working alongside multidisciplinary engineering teams. The role will cover the full product lifecycle, including requirements, architecture, circuit design, PCB development, testing, validation and production. This is an ideal opportunity for an engineer who wants to remain technically hands-on, rather than move into a predominantly management-focused position. Key Responsibilities • Own hardware designs from concept through to production, • Interpret customer requirements & specifications, • Carry out circuit design & component selection, • Complete worst-case analysis & simulation, • Work closely with PCB layout engineers, • Carry out board bring-up, testing & fault finding, • Design for manufacture, test & compliance, • Support EMC, safety & qualification testing, • Produce technical documentation, specifications & test plans, • Lead and participate in design reviews, • Provide technical input for quotations & proposals, • Attend customer technical discussions, • Identify and communicate technical risks, • Provide technical support and mentor less experienced engineers Key Skills & Experience Essential: Commercial electronics design experience Proven designs taken from concept to production Strong analogue & digital electronics experience Experience with microcontrollers Schematic capture – Altium Strong structured approach to electronics design Confident with laboratory testing, measurement & fault finding Experience working with PCB layout engineers Strong technical writing & documentation skills Experience with FMEA & structured problem solving Experience with approvals & validation Ability to manage project timings Able to work autonomously Eligible to obtain and hold UK Security Clearance (SC) Full UK driving licence Desirable Skills Switched Mode Power Supply design Experience with 8, 16, 32 & 64-bit microprocessors EMC testing & design Programming experience or awareness Version control CAN, Ethernet, RS485 & USB CAN/Ethernet diagnostics Experience working across multiple clients/projects Signal Integrity & Power Integrity knowledge Experience designing to recognised standards/regulations Experience mentoring junior engineers Current or previous UK Security Clearance The Package Competitive salary 25 days' holiday + bank holidays Hybrid/remote working Company pension Free parking Private healthcare following successful probation Life insurance

Job role: Mobile Vehicle Technician £55,000+ Overtime + Company Van + Paid Travel Bonus Schemes - Upskilling Training Shift: Monday - Friday - DAYS We’re looking for a Mobile Vehicle Technician to join clients leading engineering team, working to service, maintain, and repair diesel engines within recycling & renewable energy sites. Full Training provided to up skill from vehicles to - Plant, Large engines, Generators, and associated machinery. The main responsibilities of the Mobile Vehicle Technician will include - • Service, Maintenance and Rebuilds of diesel engines, • Service, Maintenance and Repair of power generation machinery - CHP units, Generators, Biogas systems., • Service, Maintenance and Repair of Mobile Plant Machinery - Material Handlers, Loading Shovels, Forklifts, Cranes, Skid Steers, • Service, Maintenance and Repair of Conveyor Systems, Shredders, Balers Compactors., • Carrying out breakdown support on CHP units and generators, • Diagnosing and repairing faults on mechanical, electrical, and control systems, • Supporting installation, commissioning, and optimisation of new systems, • Delivering a high standard of customer service while working on client sites, • Working both independently and as part of a wider technical support team If you are interested in this Mobile Vehicle Technician role, please submit an up-to-date CV through this advert. Biogas / CHP / Generator / Maintenance Engineer / Multi Skilled Engineer / Maintenance Technician / Generator Engineer / Generator Technician / FSE / CHP Engineer / Biogas Engineer / Diesel Engineer / HGV Technician / PSV Technician / Vehicle Technician / Service Technician / Anaerobic Digestion / Renewable Energy / Car Technician

Service Engineer (Medical Equipment) £43,000 - £48,000 + Door-to-Door Pay + Overtime + Company Van + Tools + Training Luton, M1 Corridor Are you a Field Service Engineer, Service Engineer, Maintenance Engineer, or similar with experience installing, maintaining, or repairing equipment, looking to join an established company offering excellent training, door-to-door pay, overtime, a company van, and tools? On offer is the opportunity to join a specialist business providing equipment and technical support into cleanroom, controlled environment, and specialist facility settings. You will receive structured training, including around 3 months on-site training followed by 3 months field-based learning while buddied up with an experienced engineer. You will be supported in developing your technical skills while working on specialist equipment across customer sites. In this varied role, you will be based from home and travel to customer sites across Luton and the M1 corridor, carrying out installations, planned maintenance, breakdown repairs, fault finding, and general service work. You will work safely on customer sites, use specialist tools, and ensure equipment is operating efficiently, with clean room experience being advantageous. This role would suit a Field Service Engineer with a practical background who is looking for a role with structured training, door-to-door pay, enhanced overtime, a company van, and long-term development. The Role: Installing, maintaining, servicing, and repairing specialist equipment Field-based across Luton and the M1 corridor, with door-to-door pay * Structured training, company van, tools, and overtime available at enhanced rate. The Person: Field Service Engineer, Service Engineer, Maintenance Engineer, or similar Ideally clean room experience Experience with installation, maintenance, breakdowns, or service work Full UK Driving Licence and happy covering M1 corridor Reference:BBBH26749A Keywords: Field Service Engineer, Service Engineer, Maintenance Engineer, Installation Engineer, Mechanical Engineer, Electrical Engineer, Equipment Engineer, Service Technician, Maintenance Technician, Clean Room, Cleanroom, Medical Equipment, Specialist Equipment, Fault Finding, Breakdowns, Planned Maintenance, Installations, Field-Based, Home-Based, Door-to-Door Pay, Company Van, Tools, Luton, M1 Corridor, Milton Keynes, Northampton, Bedford, Stevenage, St Albans, Hemel Hempstead, Watford, Dunstable, Leighton Buzzard. If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Product Security Engineer - Defence & Government Location: Luton - 90% onsite Rate: £80-£90 per hour Security Clearance: Active SC Clearance required Nationality: UK Eyes Only / Sole British National required Contract: 12 Months + The Role We are seeking an experienced Product Security Engineer to support the development and maintenance of bespoke security capabilities for Defence and Government customers. You will take responsibility for security across the full product lifecycle, from design and development through verification, deployment and ongoing maintenance. The role will focus on security risk assessment, security requirements, risk mitigation, security assurance and the implementation of appropriate security controls. You will work closely with product development teams, security assurance authorities, risk owners and engineering SMEs to ensure products meet relevant customer and organisational security requirements. This is a highly technical role suited to a Product Security professional with experience working across UK Defence, Government, aerospace or other highly regulated environments. Key Responsibilities Develop Security Management Plans, work package descriptions and cost estimates for bids, services and proposals. Undertake security risk assessments and develop risk mitigation plans. Conduct mitigation gap analysis and produce security management documentation for system assurance. Define product security requirements and advise engineering teams on security control implementation. Work directly with product development teams throughout the product lifecycle. Liaise with internal and external security assurance authorities to demonstrate compliance with relevant security frameworks. Work collaboratively with external security authorities, including the NCSC, where required to support security assurance. Manage security activities across development, testing and manufacturing environments. Advise engineering teams on platform lockdown, secure configuration and security hardening. Support penetration testing activities, analyse findings and develop remedial action plans. Manage through-life product security, including vulnerability management, patch management and security obsolescence planning. Support security incident management and crisis response activities. Review and contribute to corporate product security policies and processes. Deliver product security training and guidance to engineering teams. Produce and maintain technical security artefacts and assurance documentation. Security Risk & Assurance You will be responsible for ensuring security risks are appropriately identified, assessed and managed throughout the product lifecycle. This will include: Security risk assessments. Risk mitigation planning. Security requirements definition. Security cases and assurance documentation. Mitigation gap analysis. Security verification and testing. Penetration testing support and remediation. Engagement with customer security authorities and risk owners. Demonstrating compliance against applicable UK, NATO and international security frameworks. Product Security Engineering The role will require a strong understanding of how security controls are applied to bespoke products and systems, including: Product-specific operating systems. Firmware. Software. Platform security and hardening. Cryptographic technologies. Key management systems. Secure configuration and lockdown. Vulnerability and patch management. Security monitoring and incident response.You will work closely with engineering teams to ensure security requirements are translated into practical and effective technical controls. Essential Skills & Experience Demonstrable experience developing product-based security solutions for military, defence, government or commercial products and systems. Strong experience in Product Security / Information Security / Cyber Security Engineering. Experience undertaking security risk assessments and developing risk mitigation strategies. Experience defining and managing product security requirements. Experience producing technical security assurance documentation. Experience working directly with engineering and product development teams. Strong understanding of security throughout the product lifecycle. Practical experience with security assurance and compliance activities. Knowledge of UK Defence and Government security frameworks. Recent experience with relevant UK/EU/NATO information security standards and frameworks, including: UK MOD Secure by Design GovS 007 HMG IS1/IS2 ISO 27001 NIST SP 800-30, 800-37 and 800-53 UK MOD Information Security-related JSPs EU Cyber Resilience Act (CRA) US Department of Defense information security policies Experience producing security artefacts such as Key Management Plans, Security Operating Procedures, Security Cases and security testing documentation. Knowledge of cryptographic technologies and key management. Understanding of Model-Based Systems Engineering (MBSE) and the role of Product Security within the systems engineering lifecycle. Understanding of operating system, firmware and software security controls. Excellent written and verbal communication skills. Strong stakeholder management and influencing skills. Ability to work collaboratively with engineering, security and customer stakeholders. Active SC Clearance or eligibility for SC clearance with UK Eyes Only requirements. Desirable Experience DV Clearance. Practical experience with Common Criteria security evaluation techniques. Knowledge of quantum cryptography and quantum key management. Experience using threat intelligence sources. Knowledge of NATO security policy, risk management and accreditation. Understanding of security advisory boards within UK Government or NATO environments. Experience supporting security incidents or crisis management activities. Experience working across classified or highly sensitive environments. Qualifications & Professional Membership Degree or postgraduate qualification in Engineering, Computer Science, Cyber Security or a related scientific/technical discipline, or equivalent professional experience. Professional membership of an NCSC-recognised security organisation such as CIISec, ISC2 or ISACA

If you're an experienced technical salesperson who enjoys building long-term customer relationships and solving engineering challenges, this is an opportunity to grow an established customer base whilst developing new business across UK manufacturing and industrial markets. BASIC SALARY: Up to £55,000 BENEFITS: · Company Car or Car Allowance · Annual bonus based on business growth and personal growth (circa £10,000) · Pension Contributions · Private Healthcare · Death in Service (4x Salary) · 24 Days Holiday plus Birthday Off · Free EV Charging at the Office LOCATION: Home based with travel to customers nationwide and occasional visits to the office in Bedfordshire. COMMUTABLE LOCATIONS: Milton Keynes, High Wycombe, Oxford, Reading, Slough, Aylesbury, Luton, Watford, Hemel Hempstead, Northampton, Bedford. JOB DESCRIPTION: Business Development Manager, Account Manager, Technical Sales - Water Treatment, Industrial Engineering Reporting to the General Manager, as our Account Manager, you'll manage a healthy mix of existing accounts and new business opportunities (approximately 70% account management and 30% new business). Working with engineers and manufacturing customers, you'll recommend specialist UV disinfection solutions that improve efficiency and protect critical assets. Supported by the Business Manager and an experienced technical team, you'll represent a portfolio of market-leading UV technologies, building long-term customer relationships across UK manufacturing and industrial markets. KEY RESPONSIBILITIES: Business Development Manager, Account Manager, Technical Sales - Water Treatment, Industrial Engineering As our Account Manager, you will: · Develop new business opportunities whilst increasing revenue within an established portfolio of industrial customers. · Build strong relationships with engineers, production managers, maintenance teams and procurement professionals across UK manufacturing businesses. · Recommend technical solutions that improve efficiency, productivity and operational performance. · Manage the full sales process from enquiry and quotation through to negotiation, order and ongoing account development. · Maintain an active sales pipeline and CRM whilst identifying future growth opportunities. · Work closely with internal technical specialists and supplier partners to deliver exceptional customer support. PERSON SPECIFICATION: Business Development Manager, Account Manager, Technical Sales - Water Treatment, Industrial Engineering You will be someone who enjoys building long-term customer relationships whilst growing existing accounts and winning new business. You'll be comfortable working with engineers and taking a consultative approach to technical sales. Experience within water treatment or UV technology would be preferred, although we'll also consider candidates from a wider technical or industrial sales background. You'll also have: · Experience selling technical products, engineered solutions or industrial equipment into manufacturing, industrial or process-led environments. · The ability to build credibility with engineers, production managers, maintenance teams and procurement professionals. · Experience managing your own sales pipeline and forecasting activity through a CRM system. · Strong commercial awareness with the ability to identify opportunities, negotiate effectively and convert enquiries into orders. THE COMPANY: We're a well-established engineering business supplying specialist technical solutions into manufacturing and industrial markets across the UK. Our reputation has been built on technical expertise, quality products and long-term customer relationships. As we continue to grow, we're looking to strengthen our commercial team with an experienced Business Development Manager to help drive the next phase of our success. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Business Development Manager, Technical Sales Engineer, Area Sales Manager, Regional Sales Manager, Account Manager, Applications Engineer or Technical Sales - water treatment systems, pumps, filtration, valves, instrumentation, UV, industrial automation, process equipment, process control, manufacturing equipment, engineering consumables, industrial machinery - food & beverage, pharmaceutical, chemical, utilities, manufacturing, industrial processing, energy or OEM markets. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SM18606, Wallace Hind Selection

We're looking for an Applications Engineer to become part of our experienced and supportive team. This is a varied role where no two days are the same. One day you could be proving out a brand-new machine for a customer, the next you'll be delivering operator training, developing machining strategies, or demonstrating the latest technology to customers and dealers. BASIC SALARY: £36,000 BENEFITS: · Bonus payments of up to £12k a year - as a result of the company carrying out services, machine sales and demonstrations · 25 days holiday plus bank holidays · Company car · Life insurance · Permanent Health insurance LOCATION: Watford COMMUTABLE LOCATIONS: Ruislip, Harrow, Barnet, Stanmore, Wembley, Luton, Hemel Hempstead, Potters Bar, Welwyn Garden City, Borehamwood, St Albans, Rickmansworth JOB DESCRIPTION: Applications Engineer - Industrial Machinery As our Applications Engineer, you'll play a key role in supporting customers throughout the entire lifecycle of their machines, ensuring they achieve the very best performance from their investment. Your responsibilities will include: · Visiting customer sites across the UK and Ireland to install, set up and prove our machines. · Delivering operator and engineer training for customers and dealer networks. · Developing machining methods, tooling strategies and CNC programs to solve customers' manufacturing challenges. · Supporting the sales team with technical demonstrations, time studies and machining solutions. · Carrying out machine demonstrations for customers and dealers, explaining machining processes in a clear and engaging way. · Installing machines in customer facilities and showrooms. · Testing and commissioning machines to ensure safe, reliable operation. · Providing telephone and on-site technical support for customers and dealers. · Learning new machine technologies and attending manufacturer training courses. · Supporting exhibitions, open days and customer events throughout the UK and Europe. PERSON SPECIFICATION: Applications Engineer - Industrial Machinery We're looking for an Applications Engineer who enjoys engineering just as much as they enjoy helping people. You'll ideally have: · Experience and a proven track record a similar position within CNC machinery or manufacturing. · Strong knowledge of metal cutting processes, tooling and machining methods. · The ability to develop complete manufacturing processes for finished components. · Excellent problem-solving skills and a practical engineering mindset. · Confidence communicating with customers, operators and colleagues. · The ability to work independently while also thriving as part of a collaborative engineering team. · A willingness to travel throughout the UK, Ireland and occasionally overseas. THE COMPANY: We are a world leading CNC machine tool manufacture supplying the latest CNC mill-turn technology to UK industry. We have been successfully serving UK manufacturing industry since 1974, famous also for our precision watches and electronics. Our products encompass our extensive range of high performance including sliding and fixed head CNC lathes. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the recruitment partner of our client. REF: AM18602, Wallace Hind Selection

The Role My client is a well-established engineering manufacturer seeking a Test Engineer to join their growing team. This is a hands-on role responsible for carrying out electrical acceptance testing on high-value engineered products, ensuring all equipment meets customer specifications, engineering standards and quality requirements before dispatch. Working closely with Electrical, Production, Quality and Engineering teams, you will play a key role in delivering reliable testing solutions while supporting continuous improvements within the test facility. Key Responsibilities • Carry out electrical acceptance testing on large industrial electrical equipment., • Perform high-voltage testing in accordance with engineering procedures and safety regulations., • Accurately record, analyse and report test results against customer specifications and engineering standards., • Produce detailed test documentation and ensure results are recorded within company systems., • Support the development and improvement of testing methods, data acquisition systems and test procedures., • Ensure all testing equipment is correctly maintained, calibrated and fit for purpose., • Work closely with Production and Engineering teams to coordinate testing activities and meet project deadlines., • Investigate faults identified during testing and support root cause analysis where required., • Contribute to continuous improvement initiatives to enhance testing efficiency, quality and safety., • Maintain high standards of housekeeping and compliance with Health & Safety procedures. The Candidate HNC/HND or equivalent qualification in Electrical Engineering or a related discipline. Experience working with high-voltage electrical systems. Previous experience carrying out electrical testing within an engineering or manufacturing environment. Understanding of electrical power systems and large-scale test equipment. Experience working to engineering procedures, quality plans and technical specifications. Strong awareness of Health & Safety within a safety-critical environment. Ability to interpret technical drawings and engineering documentation. Excellent problem-solving skills with a proactive and methodical approach. Strong communication skills and the ability to work effectively within a multidisciplinary engineering team. Desirable Knowledge of IEC or ISO electrical testing standards. Experience carrying out dielectric, insulation resistance or performance testing. Experience working with variable speed drives (VSDs). Familiarity with data acquisition systems or automated test equipment. Experience using LabVIEW or similar software. Previous experience within rotating equipment, motors, generators or industrial electrical machinery. Salary & Benefits Competitive salary Annual performance bonus Private healthcare Enhanced pension scheme Generous holiday allowance with the option to purchase additional leave Ongoing training and professional development Employee wellbeing programme Cycle to Work scheme Employee discount platform Long-term career progression within a growing engineering business

Field Service Engineer Pharmaceutical Clean Room Equipment Northampton - London (M1 Corridor) £43,000-£50,000 + Bonus + Overtime + Van (Personal Use) + Door to Door Monday - Friday 40 hours + Overtime An excellent opportunity has arisen for a service engineer to join a well-established manufacturer of specialist pharmaceutical clean air equipment, in a highly technical and varied role. The business is going through fantastic expansion and have multiple requirements for field service engineers, on a regional basis, within the UK. With an excellent reputation across the healthcare sector, they design, manufacture, install and maintain products and systems used within hospitals and cleanroom environments. This is a business where engineers aren't just another number. You'll be joining a supportive team with a real family feel, receiving full product training and ongoing technical support to help you become an expert on their specialist equipment. Day to day within the position, you will install, service, maintain and validate the equipment, working within controlled, clean room environments. (url removed) - REF 5322 The Role: Carry out routine validation services on pharmaceutical systems (full training provided). Respond to breakdown calls and perform fault diagnosis and repair. * Install and commission new equipment at customer sites. The Candidate: Experience working within hospital or cleanroom environments Comfortable working from home and managing a field-based schedule Willingness to travel across the UK and stay away when required Flexible approach to working hours in line with customer requirements Elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Service Engineer | Mobile Engineer | Pharma | Pharmaceutical | Medical | Clean Room | Technician | London | Reading | Oxford | Bristol | Cardiff | Bridgwater | Birmingham| Swindon INDMP

Senior Electronics Design Engineer Location: Luton, Bedfordshire / Remote Hours: Monday to Friday Salary: Competitive, depending on experience We are seeking an experienced Senior Electronics Design Engineer to join an innovative electronics design and manufacturing business. This is a hands-on role, designing complex hardware solutions for major OEM customers across sectors including Automotive, Defence & Aerospace, Medical, Communications, Clean Energy and Space. The successful candidate will take ownership of designs from concept through to production, working closely with multidisciplinary engineering teams and customers. Key Responsibilities Design electronic hardware from concept through to production Circuit design, component selection, simulation and analysis Work with PCB layout engineers and review layouts Board bring-up, testing, measurement and fault finding Support EMC, validation, compliance and qualification Produce technical specifications, reports and test documentation Participate in design reviews and customer meetings Identify technical risks and manage project timescales Provide technical support and mentoring to other engineersSkills & Experience Required Strong commercial experience in electronics hardware design Proven experience taking designs from concept through to production Mixed analogue and digital design with microcontrollers Schematic capture experience, ideally Altium Confident working in a laboratory environment Experience with PCB layout and design constraints Strong analytical, problem-solving and technical writing skills Experience with FMEA, validation and approvals Able to work independently with minimal supervision Eligible to obtain UK Security Clearance (SC) Full UK driving licenceDesirable Switched Mode Power Supply Design EMC experience CAN, Ethernet, RS485 and USB Signal and Power Integrity Embedded programming awareness Experience working across multiple clients/projects Previous UK Security ClearanceWhat's on offer Competitive salary 25 days' holiday plus bank holidays Hybrid / remote working Company pension Free parking BUPA healthcare after probation Life InsuranceApply now or contact Mia Gandolfo at ProTech Recruitment in Hemel Hempstead

Just Recruitment is working with a growing business, at the forefront of their sector, looking to add a Field Service Engineer to their team - covering South - candidates will ideally be based around Luton and surrounding areas. The key purpose of this role is to be responsible for the installation, commissioning, service, repair, breakdown and maintenance of our range of capita equipment in a variety of environments. Duties include: Installation, commissioning, maintenance, and fault finding of a wide range of different manufactured and third‐party equipment Provide user training to end clients when required Provide feedback to customers on any issues raised during a commissioning, maintenance, or fault‐finding visit To be considered for this exciting role you must be able to demonstrate a background working in a field service or technical support role, gained within a capital equipment environment. You should be qualified to a minimum of level 3 or above in electrical installation/ Engineering/maintenance or another relevant technical discipline with 3 years' experience. Alternatively, a gold card electrician would be considered along with 2391 testing and inspection. Applicants are welcome from a wide range of equipment backgrounds. You must have impeccable customer service skills and a confident and professional manner in customer facing environments. Key requirements: Previous experience of performing in a technical field service team Clear and concise written and spoken communication skills Ability to present information in a structured and balanced way Good working knowledge of Word, Excel Ability to work as part of a team Positive 'can‐do' attitude Problem solver ‐ ability to engineer solutions on the job Ability to work and manage in a high‐pressure environment Work autonomously taking initiative to resolve customer issues Willing to travel and work unsocial hours when needed Some overnight stays required Benefits: This is an excellent opportunity to join a world class organisation. You will be joining a national team of Field Service personnel who take great pride in their work and who aim to build upon long term relationships with customers. You will be continually challenged as you are exposed to new technologies. You will receive constant support and guidance from senior management and your technical knowledge will be furthered through training courses. For those with the desire there are opportunities to progress your career within the department and into the wider company. In return, the successful applicant will benefit from dedicated product training, recognised by the industry, which will run on an ongoing basis as new products are introduced. A generous remuneration package is also guaranteed, including competitive salary, company healthcare package, contributory pension scheme, phone, and laptop, along with the opportunity to progress your career within a market leading organisation

Full job description Refrigeration Engineer Permanent | Luton £45,000 - £52,000 per year Infinity are delighted to be recruiting for an experienced Refrigeration Engineer on behalf of a well-established and highly respected specialist within the commercial and industrial refrigeration sector, covering Luton. Our client has built a strong reputation for delivering innovative cooling solutions across a diverse range of industries. With a focus on quality, technical excellence, and customer service, they continue to invest heavily in both their people and the latest refrigeration technologies to support long-term growth and development. This is an excellent opportunity for an engineer with a strong commercial refrigeration background who is looking to join a business that genuinely values its workforce and promotes ongoing professional development. Successful candidates will benefit from comprehensive support, mentoring, and training opportunities, enabling them to further develop their expertise across commercial and industrial refrigeration systems. The company actively encourages career progression and provides exposure to emerging technologies, including natural refrigerants such as CO₂ and hydrocarbons, as well as opportunities to progress into senior technical roles. Engineers are also supported by a well-organised and collaborative on-call and standby rota, ensuring a healthy balance between service delivery and employee wellbeing. Key Responsibilities • Service, maintenance, fault-finding, and repair of commercial refrigeration systems., • Diagnose and resolve refrigeration system issues efficiently., • Ensure compliance with industry standards, health and safety regulations, and company procedures., • Deliver a high standard of customer service at all times., • Participate in the on-call and standby rota. Benefits • Company vehicle and tools provided, • Fuel allowance, • Door-to-door travel pay, • Overtime opportunities, • Annual bonus scheme, • Healthcare benefits, • 33 days holiday, • Ongoing training and development, • Clear career progression pathways, • Exposure to advanced refrigeration technologies and natural refrigerants Essential Requirements • FGAS 2079 Certification, • Minimum 7 years' experience working within commercial refrigeration, • Strong fault-finding and diagnostic skills, • Full UK Driving Licence Desirable Qualifications & Experience • City & Guilds Levels 1, 2 & 3 in Refrigeration & Air Conditioning, • 19th Edition Electrical Installations, • IPAF, • PASMA, • CSCS Card, • Hydrocarbon Refrigerant Experience, • Pack System and CO₂ Experience If you're an experienced Refrigeration Engineer looking to join a forward-thinking business that invests in its people and offers genuine long-term career prospects, we'd love to hear from you. Pay: £45,000.00-£52,000.00 per year

Location: Luton (3 days per week onsite) Duration: 6 month initial contract Rate: £91.70ph UMB (Inside IR35) Role details: We are looking for Lead Product Security Engineers to support our defence client in Luton. The successful candidates will report to the Head of Engineering Projects and be responsible for all security aspects of product design, development, verification, and maintenance through all phases of the product lifecycle. Key Responsibilities: Develop and maintain bespoke capability security management systems for Defence and Government customers. Undertake security risk assessments and prepare security risk mitigation plans. Derive security requirements and work closely with product development teams to design, implement, and maintain appropriate security controls. Produce Security Management Plans and work package descriptions. Liaise with customer security assurance authorities to ensure product compliance with security policies. Advise development teams on suitable platform lockdown and configurations, and support Penetration test activities. Manage security incident teams during incidents/crisis situations. Deliver product security training to project engineering teams. Job Requirements: Experience in the development of bespoke product-based security solutions. Graduate degree in relevant engineering, computing, or related scientific discipline. Membership of an NCSC recognised professional security body (e.g. CIISec, ISC2, ISACA). Knowledge of UK/EU/NATO information security standards and frameworks. Practical experience of producing technical assurance documentation. Knowledge of current cryptographic technologies and key management systems. Understanding of Model Based System Engineering (MBSE). Excellent verbal and written communication skills. Ability to obtain SC clearance with UK-eyes only caveat. Desirable: DV Clearance. Experience with Common Criteria security evaluation techniques. Knowledge of Quantum Cryptography and Quantum Key management. Familiarity with existing threat intelligence sources. Understanding of NATO security policy, risk management, and Accreditation. Intrinsic Factors: This is a desk-based role using display screen equipment, working full-time hours often in a demanding environment, with occasional travel throughout the UK and abroad. While there is an option for some remote work, on-site attendance will be required for face-to-face meetings and when handling sensitive material. If you are an experienced Product Security Engineer with a background in the Defence & Security sector looking for a challenging role, apply now to join our client's team in Luton

Job role: Field Service Engineer £50,000 - Overtime + Company Van + Paid Travel Industry Training Shift: Monday - Friday - DAYS Our Client is looking to upskill - Vehicle Technicians / HGV Technicians / Plant Fitters / Generator Engineers We’re looking for a Field Service Engineer to join clients leading engineering team, working to service, maintain, and repair generators, Biogas plants, plants, CHP Systems and associated plant machinery. The main responsibilities of the Field Service Engineer will include - • Carrying out planned maintenance and emergency breakdown support of Generators., • Diagnosing and repairing faults on mechanical, electrical, and control systems, • Supporting installation, commissioning, and optimisation of new systems, • Delivering a high standard of customer service while working on client sites, • Working both independently and as part of a wider technical support team If you are interested in this Field Service Engineer role, please submit an up-to-date CV through this advert. Biogas / CHP / Generator / Maintenance Engineer / Multi Skilled Engineer / Maintenance Technician / Generator Engineer / Generator Technician / FSE / CHP Engineer / Biogas Engineer / Diesel Engineer / HGV Technician / PSV Technician / Vehicle Technician / Service Technician / Anaerobic Digestion / Renewable Energy / Vehicle Technician / Vehicle Mechanic / Plant Fitter / Plant Engineer

Principal Firmware Engineer Based in Luton 12-month contract Paying up to £85p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance Overview: As the Principal Firmware Engineer, you will work with the support of experts in their field, using world-class facilities to deliver Firmware for complex digital systems that meet challenging future customer requirements. Responsibilities: Auto-generating code using model-driven engineering using MATLAB and Simulink tools Design using tools such as Xilinx, TCL, Verilog, System Verilog, and UVM Derivation of detailed Firmware requirements and architecture from system requirements Experience required: Design tools such as Xilinx, TCL, Verilog, System Verilog, and UVM FPGA architectures such as Xilinx 7. Xilinx UltraScale; Intel (Altera) or Microsemi (Actel). Fast interfaces such as PCIe, Ethernet, and JESD A structured approach to firmware design (RTCA DO-254 or similar) Cryptography and anti-tamper techniques Artificial Intelligence including machine learning and genetic algorithms Electronics test methods and equipment Working in mixed discipline teams HNC/HND or Undergraduate Degree (Electronic Engineering, Computer Science, AI, Games Programming, Physics, or Applied Physics) or you may just have lots of skills and experience gained through your hard work.Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Field Service Engineer (Packaging Machinery) £40,000 - £47,000 + Training + Progression + Company Vehicle + Fuel Coverage + Personal Use + 25 Days Holiday + Bank Holidays + Life Insurance *Full Manufacturer Training in Italy* Luton Are you a Field Service Engineer, with a mechanical and electrical background, looking to join a growing manufacturer of specialist packaging machinery? On offer is the opportunity to join a UK market-leading supplier of liquid filling and capping machinery. The company designs, manufactures, installs and supports packaging equipment for the cosmetic, personal Care, pharmaceutical and healthcare industries. You will provide installation, servicing, maintenance and breakdown support on specialist packaging machinery at customer sites across the UK. Occasionally, you will travel to machine suppliers over in Italy. The role will involve diagnosing mechanical, electrical, pneumatic and control-system faults, as well as installing, commissioning and upgrading equipment. This role would suit a multi-skilled Field Service Engineer looking for long-term career development within a specialist engineering environment. The Role Carry out planned preventative maintenance, servicing and repairs on packaging machinery Diagnose and fault-find mechanical, electrical, pneumatic and control-system issues Install, commission and set up new packaging machinery Attending customer sites across the UK, with 1-2 nights away per week and occasional travel to Italy Complete service reports, maintenance records and testing documentation Monday to Friday The Person Experience working as Field Service Engineer Qualification in Mechanical or Electrical Engineering Full UK driving license If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH26905 Keywords: Service Engineer, Field Service Engineer, Packaging Machinery, Filling Machinery, Capping Machinery, Mechanical Engineering, Electrical Engineering, Fault Finding, Preventative Maintenance, PPM, Breakdown Support, Installation, Commissioning, Machinery Upgrades, Machinery Refurbishment, Pneumatics, Control Systems, Process Machinery, Packaging Equipment, Customer Service, Technical Support, Operator Training, Service Reports, UK Travel, Full UK Driving Licence We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Lead Hardware Engineer Based in Luton 12-month contract Paying up to £70p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance Overview: Required to solve complex technical challenges involving high-speed digital design, FPGA-based architectures, signal processing, hardware integration and system qualification within a highly regulated defence environment. Responsibilities: Design and develop complex digital and mixed-signal hardware solutions for defence and aerospace applications. Define hardware architectures for FPGA, SoC and processor-based systems. Capture schematics and support PCB layout activities for high-speed, high-performance digital designs. Design and verify high-speed interfaces including DDR memory, PCIe, Ethernet and similar protocols. Integrate FPGA, processor, software and firmware components into complete system solutions. Perform design analysis, simulation, validation and verification activities. Support hardware bring-up, debugging and root-cause investigation at board and system level. Work closely with Systems, Firmware, Software, RF, Mechanical and Production Engineering teams. Support environmental, EMC/EMI and qualification testing in accordance with defence and aerospace standards. Produce technical documentation, design evidence and progress reporting in accordance with structured engineering lifecycles. Support customer demonstrations, integration activities, acceptance testing and trials. Experience required: Proven experience designing high-speed digital electronics within aerospace, defence or other safety/mission-critical industries. Strong background in FPGA and SoC-based hardware architectures (Xilinx, AMD, Intel/Altera or equivalent). Practical board-level debugging using oscilloscopes, logic analysers, spectrum analysers and protocol analysers. Experience integrating hardware, firmware and software on complex embedded systems. Experience developing products to demanding EMC, EMI and environmental requirements. Experience designing complex multilayer PCBs incorporating: High-speed serial interfaces; High-performance processors; DDR memory subsystems & FPGA-based signal processing solutions. Knowledge of DO-254, DEF STAN, MIL-STD or equivalent aerospace and defence standards. Experience with FPGA signal processing architecture Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Agricultural Service Engineer Location: Luton Hours: Full-time, Monday to Friday (39 hours per week) with additional hours and weekend work during peak seasonal demand We are recruiting on behalf of a long-established, family-owned business for an Agricultural Service Engineer to join their Luton branch. This is a field and workshop-based role working on a premium range of agricultural machinery within a busy and well-supported service team. Key Responsibilities Service and maintain agricultural machinery including JCB Agriculture, Amazone, McHale, Lemken, Sumo and other leading brands Carry out repairs in line with manufacturer specifications to ensure reliability and safety Diagnose and rectify electrical, hydraulic, powertrain, and mechanical faults Use diagnostic software via laptop (training provided) Complete detailed service reports including photos, timesheets and documentation Identify additional repair opportunities and support service upselling where appropriate Maintain accurate records of work completed and machine condition Work with GPS, telematics and machine control systems Ensure demo and returned machines are inspected, complete and undamaged Carry out welding and fabrication when required Liaise with service departments and support operational planning Support preparation for shows, open days and events Attend manufacturer training when availableSkills & Experience Required Experience working with agricultural, plant or commercial vehicle machinery Strong diagnostic and fault-finding ability across mechanical, electrical and hydraulic systems Welding and fabrication skills desirable Good understanding of modern machine systems including GPS/telematics (advantageous) Ability to work independently and as part of a team Strong communication skills with a customer-focused approach Good time management and ability to work under pressure during peak periods Full UK driving licence required Relevant land-based engineering qualification preferred but not essentialWhat’s on Offer Company van provided Mobile phone, tablet and corporate clothing 24 days holiday plus bank holidays Company pension scheme (7% employer / 3% employee contribution) Life assurance Ongoing manufacturer training and development Overtime availableHow to Apply If you're an experienced engineer looking to join a reputable and long-established business working on high-quality agricultural machinery, apply now. Alternatively, contact David at Holt Recruitment on (phone number removed). Holt Recruitment are a leading recruitment agency specialising in Automotive, Motor Trade, Engineering, OEM, and related industries. We specialise in Plant, Agricultural, Powered Access, Forklift, Lift & Access, and Static Plant sectors. We recruit across the UK for roles including: Mobile Plant Engineer, Plant Fitter, Agricultural Engineer, Agricultural Mechanic, Powered Access Engineer, Forklift Engineer, MHE Engineer, and Generator Engineer. DH

The Customer Support Engineer provides technical support to customers and assists with service activities throughout the product lifecycle. The role supports xdjnayx customers with troubleshooting, repairs and technical enquiries while working closely with Engineering, Manu.

Inverclyde Council offers a wide range of benefits to employees including flexible working opportunities, attractive pension schemes, a Buy and Bank Annual Leave Scheme, career development and health and wellbeing support. Support Worker (Learn Dis)