Trabajos assurance en WolverhamptonCrear alertas

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the West Midlands: Bournville Coventry Solihull Stoke Wolves/Dudley A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the West Midlands: Bournville Coventry Solihull Stoke Wolves/Dudley A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the West Midlands: Bournville Coventry Solihull Stoke Wolves/Dudley A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Job Description Stairlift Engineer jobs in Birmingham at Stannah – join the team! Salary Up to £44,000 (incl OTE) based on skills and experience level. Are you a qualified Domestic Engineer with Stairlift and home lift experience looking for a job at a market-leading family-run business? Stannah, a global leader in the lift industry, is looking to recruit a qualified Stairlift Engineer. This is a great opportunity for someone with experience working within the lift industry to develop their skills and experience as this role will involve working on the domestic side. The ideal Stairlift Engineer will have proven experience as a Stairlift Engineer or Domestic Engineer within the lift industry, and you must have at least a NVQ level 2 in Lift Engineering or equivalent . This job is to cover a route across Birmingham and surrounding areas. Working Hours: 8:00 - 4.45 Mon to Thursday and 8 - 3.45 Friday Why Join Stannah: • Stannah is a renowned name in the lift market, recognised for innovation, safety, and a commitment to quality., • You will receive an attractive standby allowance and call-out payment on top of a competitive base salary., • Our benefits include a profit share bonus scheme, life assurance, matched contribution/salary sacrifice pension, Discount Rewards Scheme, and Simply Health Cash Plan to help cover your health expenses., • 25 days holiday, plus bank holidays plus the option to purchase additional, • Opportunities for career growth and advancement, • You'll have the autonomy to manage your service route, covering servicing, maintenance, and repairs on a wide range of stairlifts, micro-lifts and goods lifting equipment Stairlift Engineer Responsibilities: • Conduct maintenance, repair, and call-out visits on various types of Stairlifts and home lifts, • Ensure high-quality service and safety standards., • Perform effective risk assessments and maintain site log cards., • Participate in our on-call rota, receiving additional standby allowance and call-out payment on top of a competitive base salary. Please see the full job description here: _ Qualifications Stairlift Engineer Requirements: • An NVQ level 2 in Lift Engineering or equivalent preferred but we will train to the NVQ level 2 for the right candidate., • Proven experience as a Stairlift Engineer or Domestic Engineer within the lift industry, • A valid UK driving licence., • A passion for delivering excellent customer service Additional Information If you have a Stairlift engineering background, including an NVQ 2 in Lift Engineering or equivalent – we want to hear from you! Benefits Include: • Market Aligned Salary, paid on a monthly basis, • Profit Share Bonus Scheme, paid to all employees every quarter. Based on Group Company profits, • 25 days holiday, plus bank holidays, • Holiday scheme to buy extra days’ annual leave, • Pension Scheme. Matched contribution/salary sacrifice, • SimplyHealth Cash Plan. Allows you to claim towards health costs. For example, dental, optical, physiotherapy, chiropody treatments and more, • Life Assurance Scheme, • Long Service award scheme, with holiday benefit, • Company Benefits Discount Rewards Scheme. Includes shop discounts, hotel discounts, days out, and more, • Employee Assistance Programme. A workplace initiative to support and enhance well-being, • Company Vehicle with the option to pay for private us #LDS Stannah Group is an equal opportunities employer. We welcome and encourage applications from candidates of all backgrounds, identities, and abilities. We are a Disability Confident Committed Employer. We treat all our job applicants fairly and with respect. Our employees are the heart of our business. We take great care to create a working environment where everyone feels valued. Join our team and be a part of our diverse and inclusive community! We reserve the right to close this vacancy early if we receive high numbers of applications for the role. Appropriate right to work must be held by applicants. Sponsorship is not available. PandoLogic. Category:Engineering, Keywords:Equipment Engineer, Location:Walsall, ENG-WS3 1RL

Fostering People Join an Ofsted Outstanding fostering agency where social workers are trusted, supported and empowered to make a genuine difference to children and foster families across the West Midlands. Role: Senior / Supervising Social Worker Hours: 28 hours per week, flexible on days Basic Salary: Up to £39,392.73 per annum FTE, dependent upon experience Contract: 12-month fixed-term contract Covering Area: Central West Midlands - Birmingham, Tamworth, Wolverhampton, Walsall and Shrewsbury Benefits • £1,000 car allowance or Company Car scheme, • 30 days' annual leave, rising to 35 days with length of service, • Bank holidays, • Company pension, • Life Assurance x2, • Employee Discount Scheme, • Benefits will be pro-rated for part-time employees About Us Fostering People is an innovative and developing provider with an Outstanding inspection rating. We have a reputation for providing exceptional support to our children, Foster Parents and dedicated staff team. Established in 2000, our reputation and positive approach has enabled us to achieve growth in the fostering sector. We have received four consecutive Outstanding inspections from Ofsted. Our 2024 inspection report highlighted the following: • Staff and managers work proactively and closely with a wide range of involved agencies and professionals. They constantly strive to learn and improve the services that they provide., • Carers report being very happy working for this agency. They feel that the assessment process is robust and fair. They have excellent support from their supervising social workers, as well as managers in the agency. They attend support groups and regular events with their birth and looked-after children. They feel highly valued and respected as carer., • Agency staff report exceptionally high levels of satisfaction in their roles. They feel well supported, trained and respected. Training opportunities for staff and carers are excellent. What We Are Looking For and What to Expect From Us We are currently looking to recruit a Senior / Supervising Social Worker for our friendly and dynamic team to work with Foster Parents in the West Midlands region. • You will be responsible for the recruitment, training, assessment, support and supervision of a range of Foster Parents, ensuring high-quality placements for looked-after children One of our long-serving, now retired, Supervising Social Workers said this about her experience of working for Fostering People: "Fostering People are a fantastic company to work for where you really feel as though you can make a difference to children's lives. You will feel well supported by your line manager and also by senior management - it's a very open and inclusive environment where you feel able to share your ideas and have them listened to. Working at Fostering People gives you the opportunity to enhance your skills and knowledge and to develop your specific areas of interest." About You • An enthusiastic and committed self-starter with the ability to work independently while also keeping in touch with team members and Foster Parents. The successful candidate will have excellent assessment skills and will be a strong communicator, both written and verbal, with good IT skills and the ability to produce a high standard of report writing, • You will need to be a qualified Social Worker and hold current Social Work England registration. Recent experience in fostering and children's services is desirable, although less experienced candidates will be considered. You will possess a good working knowledge of relevant legislation, policies and procedures in relation to fostering and safeguarding, • As an innovative agency, we are seeking applicants who possess a real drive and share our creative vision, whether you're new to fostering or an experienced Supervising Social Worker Contact If you have any questions regarding this vacancy, please contact Laura Wicks, Service Manager, on 07587 669492. To be considered, please submit an application and we will be in touch to discuss. Fostering People is an equal opportunities employer and has been awarded Disability Confident Employer status by Jobcentre Plus. The successful applicant will be subject to an enhanced DBS check. PandoLogic. Category:Personal Care, Keywords:Foster Parent, Location:Wolverhampton, ENG-WV5 8AD

Job Description Technical Sales Engineer jobs in South Midlands at Stannah – Join Our team! Stannah’s New Lift Division is excited to welcome a Technical Sales Engineer to our growing team. Whether you’re already thriving in lift sales or you’re an engineer ready to step confidently into a commercial role, this is a brilliant opportunity to build your career with a respected, long‑established brand. If you’ve worked with lifts—on the tools or in front of customers—this could be the ideal next move. This is a home‑based role covering South Midlands with some covering into the Souteast and East Midlands., offering plenty of variety and regular travel across the region. You’ll take the lead in promoting and selling our machinery directive Lift range, developing strong relationships with customers, spotting new opportunities, and guiding clients toward the right technical solutions. Your expertise will help you offer trusted advice and strengthen our presence in the market. We’re looking for someone who is driven to achieve results, passionate about delivering exceptional customer service, and confident in their understanding of the new lift market. While previous sales experience is a great advantage, we’re equally keen to hear from engineers who are ready to bring their technical knowledge into a commercial environment and take on a fresh challenge. This is an exciting moment to join us, you’ll play a key role in shaping the future of the division. Working hours: Mon-Thurs 08:30-17:30 and Friday 08:30 - 13:30 Technical Sales Engineer Responsibilities • Achieve annual targeted sales, average selling prices and conversion ratios, • Monitor and report on progress, identifying and acting upon issues and concerns that arise., • Formulate and exercise strategies for optimising sales, • Assess the needs of the client through good questioning techniques, • Provide quotations that are accurate and ensure leads and quotes are followed up, • Identify, visit and build relationships with prospects and repeat customers, • Carry out site visits where required. Please see full Job Description here : _ Qualifications Technical Sales Engineer Requirements: • Previous experience working within a lift industry job, ideally in a sales capacity., • Relevant professional or technical qualification or related experience. Additional Information If you are looking for a Platform Lift Sales Engineer Job, Technical Sales Engineer , Platform Lift Sales Consultant, Platform Lift Sales Executive Job, Goods lift sales, service lift sales or Lift Sales Job, please click the apply now button or call for further information. Benefits Include: • Market Aligned Salary, paid on a monthly basis, • Profit Share Bonus Scheme, paid to all employees every quarter. Based on Group Company profits, • 25 days holiday, plus bank holidays, • Holiday scheme to buy extra days’ annual leave, • Pension Scheme. Matched contribution/salary sacrifice, • SimplyHealth Cash Plan. Allows you to claim towards health costs. For example, dental, optical, physiotherapy, chiropody treatments and more, • Life Assurance Scheme, • Long Service award scheme, with holiday benefit, • Company Benefits Discount Rewards Scheme. Includes shop discounts, hotel discounts, days out, and more, • Employee Assistance Programme. A workplace initiative to support and enhance well-being, • Enhanced maternity and paternity provision, • Company Vehicle #LDS Stannah Group is an equal opportunities employer. We welcome and encourage applications from candidates of all backgrounds, identities, and abilities. We are a Disability Confident Committed Employer. We treat all our job applicants fairly and with respect. Our employees are the heart of our business. We take great care to create a working environment where everyone feels valued. Join our team and be a part of our diverse and inclusive community! We reserve the right to close this vacancy early if we receive high numbers of applications for the role. Appropriate right to work must be held by applicants. Sponsorship is not available. PandoLogic. Category:Sales, Keywords:Sales Engineer, Location:Dudley, ENG-DY1 2RP

• On-target earnings up to £42,420, • Comprising a base salary up to £36,620, • An uncapped monthly bonus scheme with average additional earnings of £5,800per year., • 5 days a week (This centre is closed on Sundays), • Earn extra with our refer a friend scheme – T&C’s Apply We’re the UK’s largest Automotive service, maintenance and repair business and we offer great career opportunities, benefits and an uncapped bonus scheme. As a Vehicle Technician/ Mechanic, you will be already skilled in servicing and repair/replacement work. You’ll have the ability to carry out more complex tasks such as clutches and timing belt replacements and diagnostics in areas such as vehicle electrics, brake steering and suspension systems. Benefits Include: • 5.6 weeks’ annual leave, • Up to 50% off garage bills in our Autocentres and 25% off most our Halfords products in our retail stores, • Discounts on everything from groceries, shopping, insurance, days out, restaurants and more, • Family & Friends Discount Events, • Opportunity to buy a Trade Price Bike & enrol in the Cycle to Work Scheme, • Financial planning support via Wagestream - access up to 30% of your salary in advance, • GP Access, 364 days a year, 24 hours a day, • Join the Share save scheme with a 20% discount on shares, • Health Cash Plan – to access wellbeing services and claim back healthcare costs, • Pension Scheme & Life Assurance You will be given every opportunity to progress your career at Halfords. This includes access to hybrid training plus the ATA & MOT Tester Qualifications too. Skills and experience • Must have a Level 3 in Light Vehicle Maintenance and Repair or equivalent OR time served experience, • Must have a full drivers licence with no more than 9 points, • Experienced Technician/Mechanic able to carry out diagnostic work (brakes, steering/suspension, engine) and more complex repair and replacements (coolant/diesel injectors, head gasket, brakes, electrical) Why Halfords? We’re in an exciting chapter – rapidly growing our business with a focus on motoring services and electric mobility. We’re the UK’s leading retailer of motoring and cycling products and services, and the UK’s largest Automotive service, maintenance and repair business. Join us and be part of our success story in getting the nation safely back on the move. Not sure you meet all the criteria? We'd encourage you to take the wheel and apply anyway! At Halfords we are committed to creating an inclusive workplace for our colleagues. We're an equal opportunities employer and proud to welcome applications from all backgrounds and embrace diversity within our one Halfords Family.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title : Lathe & Hone Aerospace OperatorWork Schedule: Onsite Wolverhampton, GBRLathe & Hone Aerospace Operator Precision Engineering | Aerospace Manufacturing | Career ProgressionAre you an experienced machinist with a passion for precision engineering? Do you take pride in producing high-quality components to the tightest tolerances? If so, we want to hear from you.We're looking for a Lathe & Hone Aerospace Operator to join our growing aerospace manufacturing team. This is an exciting opportunity to work on critical aerospace components in a quality-driven environment where your skills and attention to detail will make a real impact.What You'll Be DoingAs a Lathe & Hone Aerospace Operator, you'll be responsible for machining and refurbishing precision aerospace components, ensuring every part meets stringent industry standards and customer specifications.Your duties will include:Setting up and operating Colchester lathes and Sunnen honing equipmentMachining aerospace components to extremely tight tolerancesReading and interpreting engineering drawings, specifications, and work instructionsSelecting appropriate tooling, fixtures, cutting parameters, and honing stonesCarrying out in-process and final inspections using:MicrometersVernier calipersBore gaugesDial indicatorsCMM equipment (where applicable)Monitoring machine performance and making adjustments to maintain quality standardsDeburring, cleaning, and finishing componentsCompleting production and quality documentation accuratelySupporting continuous improvement initiatives to enhance efficiency and productivityMaintaining a safe and compliant working environmentWhat We're Looking ForEssential ExperiencePrevious experience operating Colchester lathes and Sunnen honing machinesBackground in precision engineering, aerospace, or high-specification manufacturingAbility to work confidently to tight tolerances, often within micronsStrong understanding of machining principles and metal-cutting processesAbility to read and interpret engineering drawings and GD&TExperience using precision measuring and inspection equipmentStrong problem-solving and troubleshooting skillsExcellent attention to detail and commitment to qualityDesirable ExperienceAerospace manufacturing experienceKnowledge of AS9100 quality standardsExperience working with aerospace materials including:TitaniumInconelStainless SteelAluminium AlloysQualificationsApprenticeship, NVQ Level 3, City & Guilds, or equivalent qualification in Mechanical Engineering, Manufacturing or MachiningAerospace-related qualifications or experience would be advantageousWhat You'll BringWe're looking for someone who is:Safety-focused and quality-drivenReliable, organised, and dependableA strong team player with excellent communication skillsCapable of working independently and managing their workloadFlexible with shifts and overtime when requiredWhy Join Us?What We Offer:Flexible benefits package and development opportunities to support career progression33 days annual leave (including bank holidays)Private medical insurance, mental health support, and financial adviceGenerous life assurance and company pension contribution (from 6%)Employee share options, free onsite parking, and EV chargingYou'll Benefit From:Working on industry-leading aerospace projectsA supportive and skilled engineering teamOpportunities for career development and progressionA modern manufacturing environment with high-quality equipmentBeing part of a business committed to continuous improvement and excellenceWorking EnvironmentThis role is based within a busy manufacturing facility and will involve:Wearing PPEStanding for extended periodsManual handling of components and toolingPotential shift work depending on business requirementsTPBN1_UKTJ

Are you passionate about cars, love helping customers, and enjoy working independently? Join Halfords as a Mobile Technician and bring your skills directly to our customers’ driveways. • £14,997 per annum + bonus, • 22 hour week, • Every Saturday and Sunday 8:00 - 20:00 (overtime available during the week) As a Mobile Technician, you’ll use your technical knowledge, problem-solving ability and customer service skills to keep our customers moving. After collecting your fully equipped van from the local Hub, you’ll be guided through your route by our smart technology, carrying out a wide range of repairs and services for our customers. With full training provided for any gaps in your skill set, you can expect to carry out the following work, day-to-day: • Tyre fitting, • Dash-cam fitting, • Battery replacement, • Air-con services, • Windscreen repairs, • Oil & filter changes, • Tow-bar fitting We’re in an exciting chapter – rapidly growing our business with a focus on motoring services and electric mobility. We’re the UK’s leading retailer of motoring and cycling products and services, and the UK’s largest Automotive service, maintenance, and repair business. Join us and be part of our success story in getting the nation safely back on the move. Benefits Include: • 5.6 weeks’ annual leave, • Up to 50% off garage bills in our Autocentres and 25% off most our Halfords products in our retail stores, • Discounts on everything from groceries, shopping, insurance, days out, restaurants and more, • Family & Friends Discount Events, • Opportunity to buy a Trade Price Bike & enrol in the Cycle to Work Scheme, • Financial planning support via Wagestream - access up to 30% of your salary in advance, • GP Access, 364 days a year, 24 hours a day, • Join the Share save scheme with a 20% discount on shares, • Health Cash Plan – to access wellbeing services and claim back healthcare costs, • Pension Scheme & Life Assurance Skills and experience • Previous experience as a Tyre Fitter or in other vehicle repair work is highly desirable, • Strong customer service skills & experience, • Ability to problem-solve and work on own initiative, • This role will suit those with a real passion for all things cars & motoring, • A current valid driving licence with no more than 6 points Not sure you meet all the criteria? We'd encourage you to take the wheel and apply anyway! At Halfords we are committed to creating an inclusive workplace for our colleagues. We're an equal opportunities employer and proud to welcome applications from all backgrounds and embrace diversity within our one Halfords Family.

Are you passionate about cars, love helping customers, and enjoy working independently? Join Halfords as a Mobile Technician and bring your skills directly to our customers’ driveways. • On-target earnings up to £32,895, • A monthly bonus scheme with average additional earnings of £2,900 Per year, • Comprising a base salary of £29,995, • 44 hour week, • 4-day shift pattern, Monday - Sunday (5-day pattern also available) As a Mobile Technician, you’ll use your technical knowledge, problem-solving ability and customer service skills to keep our customers moving. After collecting your fully equipped van from the local Hub, you’ll be guided through your route by our smart technology, carrying out a wide range of repairs and services for our customers. With full training provided for any gaps in your skill set, you can expect to carry out the following work, day-to-day: • Tyre fitting, • Dash-cam fitting, • Battery replacement, • Air-con services, • Windscreen repairs, • Oil & filter changes, • Tow-bar fitting We’re in an exciting chapter – rapidly growing our business with a focus on motoring services and electric mobility. We’re the UK’s leading retailer of motoring and cycling products and services, and the UK’s largest Automotive service, maintenance, and repair business. Join us and be part of our success story in getting the nation safely back on the move. Benefits Include: • 5.6 weeks’ annual leave, • Up to 50% off garage bills in our Autocentres and 25% off most our Halfords products in our retail stores, • Discounts on everything from groceries, shopping, insurance, days out, restaurants and more, • Family & Friends Discount Events, • Opportunity to buy a Trade Price Bike & enrol in the Cycle to Work Scheme, • Financial planning support via Wagestream - access up to 30% of your salary in advance, • GP Access, 364 days a year, 24 hours a day, • Join the Share save scheme with a 20% discount on shares, • Health Cash Plan – to access wellbeing services and claim back healthcare costs, • Pension Scheme & Life Assurance Skills and experience • Previous experience as a Tyre Fitter or in other vehicle repair work is highly desirable, • Strong customer service skills & experience, • Ability to problem-solve and work on own initiative, • This role will suit those with a real passion for all things cars & motoring, • A current valid driving licence with no more than 6 points Not sure you meet all the criteria? We'd encourage you to take the wheel and apply anyway! At Halfords we are committed to creating an inclusive workplace for our colleagues. We're an equal opportunities employer and proud to welcome applications from all backgrounds and embrace diversity within our one Halfords Family.

Salary circa £40,000 | Flexible Working Hours | Company Pension | Career Progression \n A Quality Engineer opportunity has arisen within a well-established specialist manufacturing business supplying products into a diverse range of established and growing engineering sectors. This is a hands-on role focused on customer quality, technical problem solving and continuous improvement rather than inspection. \n Working closely with Operations, Technical and the Quality Manager, you'll lead customer quality investigations, identify root causes and implement permanent corrective actions to improve quality and manufacturing performance. \n Quality Engineer responsibilities include - \n\n • Leading customer complaint investigations and producing robust customer-facing 8D reports.\n, • Conducting structured Root Cause Analysis and implementing and verifying corrective actions.\n, • Supporting PPAP and APQP activities while maintaining FMEAs and Control Plans.\n, • Analysing quality data to identify recurring issues and improvement opportunities.\n, • Working closely with Operations and Technical teams to improve process capability and reduce defects.\n, • Supporting customer visits, internal audits, non-conformance investigations and continuous improvement projects.\n\n Quality Engineer desirable skills and experience - \n\n • Quality Engineer experience within an automotive manufacturing environment.\n, • Customer quality experience, including leading investigations and producing customer-facing 8D reports.\n, • Strong Root Cause Analysis and structured problem-solving skills.\n, • Knowledge of Automotive Core Tools including PPAP, APQP, FMEA, SPC and MSA.\n, • Experience working within an IATF 16949 environment.\n, • Confident customer-facing communication skills with a proactive and methodical approach to problem solving.\n\n Quality Engineer benefits include - \n\n • Salary circa £40,000.\n, • Flexible working hours.\n, • Company pension scheme.\n, • Opportunity to work within an established Quality team.\n, • Ongoing training and career development.\n, • Opportunity for future progression.\n\n This role would suit an experienced Quality Engineer or Customer Quality Engineer looking to join an established manufacturing business supplying a diverse range of growing industry sectors. \n If you're an experienced Quality Engineer with a strong background in customer quality, 8D and Root Cause Analysis looking for your next opportunity, apply now via the link in this Quality Engineer advert. \n Keywords: \n Quality Engineer, Customer Quality Engineer, Quality Assurance, Quality Engineering, Automotive Quality, IATF 16949, PPAP, APQP, FMEA, SPC, MSA, 8D, Root Cause Analysis, Problem Solving, Corrective Actions, Control Plans, Automotive Core Tools, Customer Quality, Non-Conformance, Continuous Improvement, Manufacturing, Wolverhampton, West Midlands. \n ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity.

Test Quality Assurance Engineer - Walsall \n Opportunity: \n Are you a Test Engineer with experience of working on medical device products? Does your experience include both software and hardware testing? Want to work for a growing medical device development company? If yes then this is the role for you. \n Your role as a Test Quality Assurance Engineer based in Walsall will involve designing, implementing, and performing product quality test procedures for both software and hardware on the companies medical device products. \n You will be responsible for understanding the product requirements and its features, designing test procedures and data to test the medical device product. You will be the last line of defense before the products are released to the market. \n Duties and responsibilities include: \n\n • Attending meetings with the design team to understand the product details (for example: intended use, requirements, software design, and hardware design).\n, • Developing test strategies.\n, • Writing test plans and creating test cases for the products both software and hardware.\n, • Analysing opportunities and implementing automated testing.\n, • Reporting product quality issues and working with the team in resolving the issues.\n, • Ensuring all tests and procedures meet the company’s Quality Management System and Regulatory standards.\n, • Preparing test reports for regulatory submission.\n\n This is a full time permanent job opportunity based in Walsall paying an excellent salary of £30,000 - £35,000 per annum and great benefits such as 23 days holidays plus bank holidays on top, Insights Bonus scheme, cycle to work scheme, Life insurance and much more. \n Skills: \n To apply for the role of Test Engineer you will have the following: \n\n • Bachelor’s Degree in Engineering (Computer Science, Mechanical, Electrical, or Biomedical).\n, • Experience in testing software and hardware products.\n, • Working knowledge of Medical Products Quality Management System.\n\n How to Apply: \n To apply for this one off opportunity, please send a word copy of your CV to me now by clicking on the Apply button or call me for a confidential chat. Please ensure you have read and agree to our Privacy Policy which can be found on the Quality Start website. \n If this sounds like the role for you or a colleague then please don’t hesitate to contact us. If we manage to successfully fill a permanent placement from your recommendation then we will send you a cheque of £300. We also have many incentive schemes for referring contractors/temp staff so please contact us with the referral and we can provide you with more information. \n For a list of our current vacancies, please visit the Quality Start Website. \n If you do not hear from Quality Start within 2 weeks your CV has not been short listed for this role. \n Quality Start are acting as a specialist recruitment consultancy for this role.

ELECTRICAL MAINTENANCE ENGINEER \n Job Title: Electrical Maintenance Engineer \n Location: West Midlands \n Salary: Up to £40,300 \n Shift: Monday – Friday | 8:00am – 4:30pm | 39 Hours per Week \n Job Role of the Electrical Maintenance Engineer \n A fantastic opportunity has become available for an Electrical Maintenance Engineer to join a well-established heavy industrial manufacturer. This is an excellent opportunity to join a business with a strong reputation for investing in its engineering team, offering a stable working environment, excellent work-life balance and long-term career prospects. \n You will be responsible for carrying out electrical maintenance, fault finding and planned preventative maintenance across a range of industrial plant and production equipment, ensuring maximum reliability, safety and operational efficiency. \n Sector – Heavy Industrial Manufacturing \n Non-Negotiable Requirements of the Electrical Maintenance Engineer \n\n • Electrical maintenance experience within an industrial manufacturing environment.\n, • Experience carrying out planned, reactive and breakdown maintenance on industrial plant.\n\n Requirements for the Electrical Maintenance Engineer \n\n • Strong hands-on electrical fault-finding experience.\n, • Recognised Electrical Engineering qualification (NVQ Level 3, Apprenticeship or equivalent).\n, • Experience working within a manufacturing or heavy industrial environment.\n, • Knowledge of motors, drives, control panels, sensors and electrical distribution systems.\n\n Desirable Requirements of the Electrical Maintenance Engineer \n\n • Previous experience working as a Maintenance Engineer in the UK.\n, • PLC fault-finding experience.\n, • Welding or fabrication experience would be advantageous.\n\n The Electrical Maintenance Engineer will benefit from: \n\n • Salary up to £40,300.\n, • Monday to Friday days role (8:00am – 4:30pm).\n, • 39-hour working week with an excellent work-life balance.\n, • Company pension.\n, • Life assurance.\n, • Ongoing training and development.\n, • Stable employment with a well-established industrial manufacturer.\n\n If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. \n For further details contact Begs at Pioneer Selection. \n As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. \n

Are you an experienced Product Manager orTechnical Sales professional? Do you have a background in electrical machinery/equipment? Are you confident working across product development, electrical safety standards, and global commercial activities?If so, a global engineering business is looking to appoint a Product Manager – Electrical Safety to take ownership of one of its product portfolios, supporting the continued growth of an established global product line.Product Manager – Electrical SafetyPermanent PositionRemote working available£50,000 - £65,000 + BonusWolverhamptonProduct Manager – Electrical SafetyJob Description:\n\n • Owning the product portfolio across the full product lifecycle, including development, launch, growth and optimisation.\n, • Leading the delivery of the product to market, including product requirements, business case development, competitive positioning and go-to-market planning.\n, • Developing and applying knowledge of electrical safety standards including UL 1436, NFPA 70E, IEC 61010, IEC 61243-5 and EN 50110 to shape product requirements and positioning.\n, • Conducting structured Voice of Customer activity with end users, channel partners and industry stakeholders across global markets.\n, • Owning and maintaining the 3-year electrical safety product roadmap, aligned with wider business and strategic priorities.\nProduct Manager – Electrical SafetyEssential Experience/Skills/Qualifications:\n\n, • 5+ years' experience in Product Management, Technical Marketing or Technical Sales within a technical B2B environment.\n, • Strong background within Electrical/Electro-mechanical machinery or equipment\n, • Practical understanding of low-voltage electrical systems\n, • Advantageous to have working knowledge of one or more of UL 1436, NFPA 70E, IEC 61010, IEC 61243-5, EN 50110\n, • Proven experience managing products through the full lifecycle, from requirements and business case through certification, launch and commercial optimisation.\nBenefits:\n\n, • 25 days holiday per year + bank holidays\n, • Pension – employer contribution up to 10.5%\n, • Company Bonus Scheme\n, • Airport parking discounts\n, • Eyecare\n, • Remote working\n, • Annual Halma share vesting scheme\n, • Long service recognition\n, • Life assurance cover\nPlease apply below if this role is of interest!

Test Quality Assurance Engineer - Walsall \n Opportunity: \n Are you a Test Engineer with experience of working on medical device products? Does your experience include both software and hardware testing? Want to work for a growing medical device development company? If yes then this is the role for you. \n Your role as a Test Quality Assurance Engineer based in Walsall will involve designing, implementing, and performing product quality test procedures for both software and hardware on the companies medical device products. \n You will be responsible for understanding the product requirements and its features, designing test procedures and data to test the medical device product. You will be the last line of defense before the products are released to the market. \n Duties and responsibilities include: \n\n • Attending meetings with the design team to understand the product details (for example: intended use, requirements, software design, and hardware design).\n, • Developing test strategies.\n, • Writing test plans and creating test cases for the products both software and hardware.\n, • Analysing opportunities and implementing automated testing.\n, • Reporting product quality issues and working with the team in resolving the issues.\n, • Ensuring all tests and procedures meet the company’s Quality Management System and Regulatory standards.\n, • Preparing test reports for regulatory submission.\n\n This is a full time permanent job opportunity based in Walsall paying an excellent salary of £30,000 - £35,000 per annum and great benefits such as 23 days holidays plus bank holidays on top, Insights Bonus scheme, cycle to work scheme, Life insurance and much more. \n Skills: \n To apply for the role of Test Engineer you will have the following: \n\n • Bachelor’s Degree in Engineering (Computer Science, Mechanical, Electrical, or Biomedical).\n, • Experience in testing software and hardware products.\n, • Working knowledge of Medical Products Quality Management System.\n\n How to Apply: \n To apply for this one off opportunity, please send a word copy of your CV to me now by clicking on the Apply button or call me for a confidential chat. Please ensure you have read and agree to our Privacy Policy which can be found on the Quality Start website. \n If this sounds like the role for you or a colleague then please don’t hesitate to contact us. If we manage to successfully fill a permanent placement from your recommendation then we will send you a cheque of £300. We also have many incentive schemes for referring contractors/temp staff so please contact us with the referral and we can provide you with more information. \n For a list of our current vacancies, please visit the Quality Start Website. \n If you do not hear from Quality Start within 2 weeks your CV has not been short listed for this role. \n Quality Start are acting as a specialist recruitment consultancy for this role.

Job Role: Residential Childcare Trainer / AssessorLocation: Midlands (Hybrid with Regional Travel)Salary: £28,000 – £32,000 per annumContract: Permanent, full-timeRole Overview We are recruiting an experienced and committed Residential Childcare Trainer / Assessor to deliver high-quality teaching, learning and assessment across Level 4 and Level 5 qualifications. This hybrid role combines remote delivery with face-to-face learner support, requiring travel across the Midlands. As a Residential Childcare Trainer / Assessor, you will manage a caseload of approximately 50 learners, supporting them from induction through to timely completion. You will play a key role in developing learners’ knowledge, skills and behaviours, ensuring they meet occupational standards while delivering a high-quality, compliant and engaging learning experience. This is an excellent opportunity for either an experienced Trainer / Assessor, or a strong Residential Childcare professional (e.g. Senior, Deputy or Manager) looking to transition into training and assessment. Full support will be provided to achieve the Level 3 CAVA qualification where required, with salary aligned to experience and qualification level.Key ResponsibilitiesTeaching, Learning & Assessment\n\n • Qualification Delivery: Deliver and assess Residential Childcare qualifications up to Level 5.\n, • Session Planning: Plan and deliver engaging sessions using blended learning approaches.\n, • Tailored Support: Provide tailored teaching and assessment aligned to learner needs.\n, • Competence Development: Support learners to develop occupational competence and professional behaviours.\nLearner Management & Progression\n\n, • Caseload Control: Manage a caseload of approximately 50 learners, ensuring timely progression and achievement.\n, • Onboarding Plans: Conduct initial assessments and create Individual Learning Plans (ILPs).\n, • Coaching & Reviews: Provide ongoing coaching, feedback and progress reviews.\n, • Workplace Liaison: Engage with employers and managers to support learner development.\nAdministration & Compliance\n\n, • Portfolio Management: Maintain accurate learner records, progress tracking and e-portfolio documentation.\n, • Quality Frameworks: Ensure delivery meets awarding body and compliance standards.\n, • Inspection Support: Prepare for and support internal and external quality assurance activity.\n, • Target Management: Work to performance targets including achievement rates and timely completions.\nDelivery & Travel\n\n, • Blended Formats: Deliver a mix of remote and face-to-face sessions.\n, • In-Person Visits: Conduct learner visits in line with programme requirements.\n, • Regional Travel: Travel across Bristol and the West of England region as required.\nTraining & Development Opportunity\n\n, • Candidates without an assessing qualification will be supported to achieve the Level 3 CAVA\n, • Ideal for experienced practitioners moving into L&D\n, • Salary will reflect current experience and increase with qualification completion\nEssential Criteria\n\n, • Sector Credential: Relevant qualification in Residential Childcare (Level 3 or above).\n, • Delivery Experience: Experience delivering or assessing Residential Childcare qualifications (L4/L5 preferred).\n, • Caseload Management: Ability to manage a caseload effectively within a target-driven environment.\n, • Core Skills: Strong organisational, planning and time-management skills.\n, • Logistics: Full UK driving licence and willingness to travel.\n, • Experience in a Senior / Deputy / Management role within children’s homes.\nDesirable Criteria\n\n, • Leadership Award: Level 5 qualification in Leadership & Management.\n, • Qualifications: Recognised teaching or assessing qualification (TAQA, CAVA, A1, D32/33 or equivalent).\n, • Delivery Experience: Experience delivering or assessing Residential Childcare qualifications (L4/L5 preferred).\n, • Quality Monitoring: Internal Quality Assurance (IQA) qualification.\n, • Funded Learning: Experience delivering apprenticeships or funded provision.\n, • Hybrid Systems: Experience in hybrid or remote delivery environments.\nAdditional Information\n\n, • Work Framework: Hybrid role combining remote delivery with regional travel.\n, • Capacity Benchmark: Caseload typically averages 50 learners, dependent on experience and competence.\n, • Background Verifications: Role subject to relevant background and compliance checks.\nHow to Apply If you are ready to take the next step in your career as a Residential Childcare Trainer / Assessor, please contact us. To apply or request further information regarding this Residential Childcare Trainer / Assessor position, please contact:\n\n, • Contact: Robert Rowe\n, • Phone:\n, • Email:\n

Your new companyYou will be joining a well-established and highly respected contractor based in Walsall with a strong reputation for delivering high-quality projects within the water sector. This multi-accredited contractor delivers clean and waste water capital programmes directly for multiple major water providers and is well-known for its collaborative culture, customer-focused approach and commitment to developing its people. Due to continued success and a strong pipeline of AMP8 projects, they are actively seeking a talented Quantity Surveyor to join their team. \n This is a full-time permanent position based out of their Walsall office with hybrid and flexible working. \n Your new roleAs a Quantity Surveyor, you will play a key role in the commercial management of water infrastructure projects. Working closely with operational and commercial teams, you will be responsible for ensuring projects are delivered profitably while maintaining strong relationships with clients, subcontractors and stakeholders. \n Key responsibilities will include: \n\n • Managing project costs from inception through to final account\n, • Preparing and submitting applications for payment\n, • Administering subcontractor accounts, payments and variations\n, • Producing cost reports, forecasts and cash flow projections\n, • Identifying and managing commercial risks and opportunities\n, • Supporting procurement activities and subcontract negotiations\n, • Ensuring compliance with contract requirements and commercial procedures\n, • Working closely with project delivery teams to drive commercial performance\n, • Managing compensation events, change control and contractual correspondence\n, • Building and maintaining positive relationships with clients and supply chain partners.\n\n What you'll need to succeedIn order to be successful, you must have: \n\n • Degree/HNC/HND in Quantity Surveying (or similar) or experience equivalent\n, • Experience as an Assistant Quantity Surveyor or Quantity Surveyor within water, utilities, civil engineering or infrastructure projects\n, • Sound working knowledge of NEC form of contract\n, • Excellent communication and stakeholder management abilities\n, • Strong commercial awareness and cost management skills\n, • Full UK driving licence.\n\n What you'll get in returnIn return, you will receive: \n\n • Starting salary up to £50,000 per annum\n, • Company car (with fuel card) or car allowance\n, • 25 days' annual leave plus bank holidays\n, • Company pension scheme\n, • Hybrid working (1 day remote per week) and flexible working arrangements\n, • Life assurance\n, • Multiple family-friendly benefits\n, • Reward and recognition scheme\n, • Annual salary review\n, • Health and wellbeing benefits\n, • Structured career development and mentorship\n, • Exposure to high-impact and rewarding projects\n, • Collaborative and supportive team environment\n, • Opportunity to grow and advance your career with a leading contractor and more.\n\n What you need to do nowIf you're interested in this role and meet the criteria above, click 'apply now' to forward an up-to-date copy of your CV, or call us now. \n If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. \n Please note: applicants must hold existing UK work authorisation; visa sponsorship cannot be provided for this position. \n Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

MachinistLocation : Dudley, DY1 4DASalary: Competitive, DOE + Excellent Benefits!Contract: Full time, PermanentCompany Benefits : 5% Matched Pension, Holidays, 25 plus bank holidays, Life Assurance, Cycle to work scheme, Cash health care scheme - Paycare, Birthday Vouchers, Employee Assistant Programme, Branded Uniform, Free parking and Free tea & coffee!Join Hayley 24/7 EngineeringAt Hayley 24/7 Engineering, we pride ourselves on being a fast and effective provider of mechanical engineering solutions to customers across all industry sectors.Due to continued growth, we are looking for an experienced Machinist with a strong turning background to join our busy and expanding Machine Shop team in Dudley.This is an excellent opportunity for a skilled engineer who enjoys working with precision components, solving technical challenges, and contributing to a high-quality manufacturing environment.As our Machinist you will be reporting to the Machine Shop Supervisor, you will be responsible for producing high-quality machined components from raw materials using a variety of machining processes.The successful candidate will have experience setting up, operating, programming and proving CNC machinery, with particular emphasis on turning operations.Experience with ProtoTRAK XYZ and Siemens controls is highly desirable.As our Machinist you will:Interpret engineering drawings, technical specifications and CNC programmes.Set up, operate and adjust machine tools to produce components to specification.Create, prove and edit CNC programmes where required.Measure and inspect completed components using appropriate measuring equipment.Make adjustments to machinery and programmes to ensure quality standards are met.Work independently with minimal supervision while maintaining high levels of accuracy.Support workshop activities relating to quality, health & safety and environmental standards.Identify opportunities for continuous improvement and assist in solving engineering and manufacturing challenges.Ensure all relevant documentation, drawings and quality records are completed and maintained.About YouWe're looking for a motivated machinist who can demonstrate:Proven machining experience with a strong bias towards turning.Experience working with CNC machine tools.Ability to read and interpret engineering drawings and technical documentation.Strong understanding of machining principles including speeds, feeds, angles, tapers and material removal.Experience using precision measuring and inspection equipment.Knowledge of common engineering materials and their machining characteristics.Ability to work from instruction as well as using your own initiative.Strong attention to detail and commitment to quality.It would be great if you had:Experience using ProtoTRAK XYZ controls.Experience with Siemens-controlled machinery.Health & Safety, Quality or Environmental training.Engineering qualification, apprenticeship or related manufacturing background.Apply TodayIf you're an experienced machinist with CNC turning expertise and are looking to join a respected engineering business where your skills will be valued, we'd love to hear from you.Apply now and become part of the Hayley 24/7 Engineering team in Dudley!TPBN1_UKTJ

We are seeking an experienced Major Projects Programme Delivery Lead to provide senior leadership across a high-profile portfolio of regeneration, infrastructure, economic growth and place-making initiatives. \n This is a senior delivery-focused assignment at a pivotal stage of a major transport and regeneration programme. The successful candidate will bring together multiple projects into a coherent programme, establish strong governance and drive tangible delivery across a complex public sector environment. Key Responsibilities\n\n • Provide senior programme leadership across major regeneration, infrastructure and place-based initiatives.\n, • Develop and maintain a single integrated Major Projects Programme, ensuring strategic alignment, dependencies and priorities are clearly understood.\n, • Lead operational readiness activity associated with major transport infrastructure and interchange projects.\n, • Establish programme governance, reporting, risk management, assurance and performance dashboards.\n, • Identify and remove barriers to delivery, driving pace, accountability and effective decision-making.\n, • Lead the commissioning, procurement and mobilisation of a major place-based masterplan and manage external consultants through delivery.\n, • Coordinate cross-organisational engagement and ensure projects are aligned with wider regeneration and investment objectives.\n, • Prepare high-quality Cabinet reports, executive briefings, Member reports, decision papers and programme updates.\n, • Develop strong relationships with regional transport bodies, combined authorities, developers, investors, consultants and strategic partners.\n, • Provide senior strategic advice to Members and executive leadership on programme progress, risks, opportunities and investment priorities.\n, • Ensure major projects create wider opportunities for economic growth, regeneration, investment and place-making.\n, • Establish delivery arrangements that can transition effectively into the organisation's permanent place-based operating model.\nEssential Requirements\n\n, • Proven senior-level experience leading major regeneration, infrastructure, economic development or place-based programmes.\n, • Strong track record of delivering complex programmes within local government or another highly regulated public sector environment.\n, • Experience managing multiple interconnected projects and translating strategic ambitions into practical delivery programmes.\n, • Strong knowledge of programme governance, risk management, capital programme delivery and public procurement.\n, • Experience commissioning and managing external consultants and multidisciplinary delivery teams.\n, • Demonstrable experience working with elected Members, senior executives and high-profile stakeholders.\n, • Strong partnership-working experience across public sector organisations, regional bodies, developers and investors.\n, • Excellent understanding of regeneration, place-making, infrastructure investment and economic development.\n, • Exceptional communication, influencing and stakeholder management skills.\n, • Ability to establish credibility quickly, operate with autonomy and provide immediate delivery leadership.\n, • Strong commercial and political awareness, with the judgement to manage financial, reputational and delivery risks.\n, • A clear bias for action, with the ability to bring structure, pace and accountability to complex programmes.\nKey Deliverables\n During the assignment, the successful candidate will be expected to: \n\n • Establish effective programme governance, reporting and assurance arrangements.\n, • Deliver operational readiness for major transport infrastructure milestones.\n, • Procure, mobilise and manage the strategic place-based masterplan commission.\n, • Produce evidence-based strategic findings and recommendations for senior leadership and Members.\n, • Create an integrated programme covering major regeneration, infrastructure and place-making initiatives.\n, • Strengthen collaboration across internal services and external strategic partners.\n, • Establish a robust programme framework capable of transitioning into the organisation's permanent operating model.\nApply\n This is a high-profile interim leadership opportunity for an experienced programme professional who can operate at strategic level while maintaining a strong focus on delivery. \n Candidates should demonstrate a proven record of turning complex regeneration and infrastructure ambitions into structured, governed and deliverable programmes. \n Apply now with your CV and details of your relevant major projects and public sector programme experience.

About BarhaleWho are Barhale?Barhale is a business founded on family values, having been established by our Chairman, Dennis Curran, in 1980. We are one of the largest privately owned civil engineering and infrastructure specialists in the UK, with over 40 years of experience in providing design, civil engineering and maintenance services working across multiple sectors, including:WaterTransportBuilt environmentEnergyWe operate as a tier one partner for blue chip, regulated and private clients, working as part of large frameworks, joint ventures and alliances, as well as on individual standalone projects, developing long-term relationships based on delivering to the Barhale values which have been integral to our business since their inception in 1985.Our direct delivery model is at the core of everything we do, as we believe that people are our greatest asset. Therefore, we robustly source, train and retain all our own frontline delivery teams as well as management and support services. We employ over 1,200 employees nationwide.We possess a range of specialist skills to support our civil engineering and infrastructure activities, including:TunnellingMEICATemporary and permanent designSteel-fabricationSigns (design and fabrication)Health & safety equipment and products, including PPECompany Website:https://www.barhale.co.uk/Company Showcase Video:https://www.youtube.com/watch?v=XFqsoclCUZAWhy join Barhale?As Gold Investors in People, we are committed to a high standard of people practices, creating an inclusive environment and ensuring cultural alignment to business strategy, ethos and philosophies.Job security, long-term secured work through various frameworks and large infrastructure schemesA broad range of civil engineering, mechanical and electrical schemes across some of the UKs largest infrastructure projects and clientsStrong career progression as demonstrated by our track record in promoting from within, as we believe this is a key driver of our successQuality Co-ordinatorThe RoleOperate within the project environment to support the project team in the production, Coordination, submission, and signing of Quality assurance deliverables.Coordinate, monitor and support the project team in the production of Quality deliverables following Project W&SI & Management Systems to meet the time, quality and budgetary and health and safety targets.Ensure Quality Assurance activities applied are comprehensive, robust, in line with the W&SI, and are appropriately applied to the scalability, complexity, and levels of risk across the programme.Working with Site Engineers and Site Supervisors, reporting into the Site Manager and the central Quality Assurance team.Key ResponsibilitiesAssist the project team to ensure all site quality documentation is coordinated/maintained/recorded/and registered as necessary to ensure compliance with Company procedures and Contract Requirements.Promote the reporting of non-conformances.Drive the continuous improvement culture by promoting and supporting Lessons learned (post-project) reviews together with shared quality learning events.Cascade out the central Quality function reporting and act as the point of interface between the central quality team and regional teams for the quality function.Deliver GIRI training to the regional teams. Training will be provided.Assist the Assurance team, project, and site team to ensure the quality systems are being implemented across the project.Take a lead role in monitoring quality control on-site, compliance with Inspection and Test requirements, deliverable records and closure of Non-conformance and Outstanding Works. overseeing ITP compliance on live works.Chase test results and close out records.Work with site teams to resolve NCPs.Advise the site teams on Quality-related topics and Issue Quality Bulletins and AlertsEnsure that the management controls in place are being followed.Ensure visibility and traceability of documented evidence are monitored and maintained.Offer Quality guidance, direction, and instruction to the operational team to develop and improve their understanding of the Quality Management SystemGather information and feedback from the Project Teams to enable improvement.Promote a positive Quality CultureSupport the business to ensure compliance with ISO 9001 Standard and contract requirements.Be a champion for the Quality Right First Time initiative.Take a proactive role in QA deliverable planning, ensuring all hold points are mapped out and communicated.Work closely with the Head of Quality in achieving progressive assurance through the construction phase into the commissioning/ handover phases.Work with the Head of Quality to ensure the commissioning and handover documentation is produced in line with project requirements, Utility Company requirements and contract requirements.Be a champion for innovation.EssentialExperience in civil engineering, utilities, or infrastructure projectsPrevious experience working in a quality Coordinator role.Ability to implement quality control.Strong communication and stakeholder engagement skillsAbility to influence site teams and drive quality cultureDesireableFamiliar with ISO 9001 and audit processesExperience managing NCRs and QA documentation systemsIn-depth knowledge of the Microsoft Office suite of packagesCaring and investing in youOur values have been embedded at Barhale for over 40 years, and they are our guiding principles regarding how we care and invest in people. Our values are our commitment to being a people-centric company.As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them.From the moment you join us, your well-being and career aspirations will be supported by.Competitive salaryCompany PensionLife AssurancePrivate Medical25 days of annual leave in addition to 8 public bank holidays and loyalty days8 hours volunteeringEmployee Assistance Programme to support your mental, physiological and financial wellbeingFlexible benefits via salary sacrificeCompany car/green car scheme/car allowance/Van (dependent on position)Leadership & management training and coachingRegular line management engagement and appraisal to support your career progressionDevelopment supported by internal and externally delivered trainingContinuous service awardsWould you like to know more?Please contact our Recruitment team viaTPBN1_UKTJ

Gas Engineer – Gas Service & Repair Engineer | Dudley \n \n Basic Salary: £33,302.98 with realistic expected earnings of up to £45K thanks to our unique price‑work structure; ADDITIONAL payments for repairs, long duration works, stand-by & on-call \n\n • Full-Time, Permanent Contract\n, • Annual Pay Review & Profit Share Scheme\n, • Fully Costed Van & Fuel Card (EV options with free home install)\n, • Renewables Upskill Potential\n, • Local ByBox Allocation – less travel, more earning potential\n\n \n Exceptional Benefits Package \n\n • Employee Energy Allowance & Discount on HIVE Products\n, • Company-Funded Healthcare + 24/7 Online GP Service\n, • Company-matched Pension scheme\n, • 25 Days Holiday + Bank Holidays\n, • Full Sick Pay after successful probation\n, • Life Assurance, Income Protection & Accident Insurance\n, • Exclusive Retail Discounts & Financial Education Support\n\n \n Your role \n You will be carrying out servicing and maintenance in domestic Social Housing properties, aiming for first-time fixes with the support of our 24/7 network \n \n What we need from you \n\n • Hold a valid UK driving license with no more than 6 points\n, • Hold the Right to Work in the UK\n, • Hold 2 year’s minimum qualified experience\n, • Be ACS qualified, including CCN1, CENWAT, HTR1, & CKR1\n, • Exhibit knowledge of all procedures and safety measures to PH Jones and British Gas standards whilst offering excellent customer service\n\n \n PH Jones was formed in 1963 and has continued to grow through the provision of excellent customer service, high quality delivery and an unrivalled focus on customer care. \n \n PH Jones was acquired by British Gas in 2011 and is a key member of the Centrica Plc, a FTSE 100 company. At Centrica we embrace diversity and actively seek to attract individuals with unique backgrounds and perspectives. To build a more sustainable future, we need the best team – a team with a diverse mix of people and skills, where everyone feels welcome and able to succeed.

Health & Safety Manager \n Location: Bilston, Wolverhampton \n Salary: c£50,000 + Company Car/Car Allowance \n Hours: Full Time, Monday to Friday (Flexibility Required) \n About the Role \n We're looking for an experienced and proactive Health & Safety Manager to lead our health, safety and environmental strategy across our manufacturing facility and customer sites. This is a hands-on role where you'll work closely with employees, managers and contractors to drive compliance, continuous improvement and a positive safety culture. \n Key Responsibilities \n You'll be responsible for: \n\n • Ensuring compliance with UK Health & Safety legislation, including COSHH, PUWER, RIDDOR and associated regulations.\n, • Developing, implementing and continuously improving Health & Safety policies, procedures and emergency plans.\n, • Conducting risk assessments, audits and site inspections, ensuring hazards are identified and addressed.\n, • Leading accident, incident and near-miss investigations, implementing preventative actions.\n, • Delivering Health & Safety inductions, toolbox talks and training.\n, • Monitoring and reporting Health & Safety performance, providing insights and recommendations to senior management.\n, • Managing contractor, visitor and environmental compliance, including waste management, hazardous substances and fire safety.\n, • Championing a proactive safety culture and supporting ISO 45001 and ISO 14001 standards.\n, • Driving the transition to digital Health & Safety systems and supporting the business's Zero Accident strategy and wellbeing initiatives.\n\n About You \n You'll have: \n\n • NEBOSH Diploma (or equivalent).\n, • IOSH Membership (GradIOSH or CMIOSH preferred).\n, • Previous Health & Safety leadership experience within manufacturing or another high-risk environment.\n, • Excellent knowledge of UK Health & Safety legislation, including COSHH, PUWER and RIDDOR.\n, • Experience working with ISO 45001 and ISO 14001 management systems.\n, • Strong communication, coaching and influencing skills, with the ability to engage colleagues at every level.\n, • A practical, hands-on approach with excellent analytical and reporting skills.\n\n What We Offer \n\n • c£50,000 salary plus company car/car allowance.\n, • Company benefits including pension, life assurance and employee benefits platform.\n, • Ongoing professional development and training.\n, • The opportunity to make a real impact within a growing manufacturing business where Health & Safety is a genuine business priority.\n\n If you're passionate about creating safer workplaces, driving positive change and embedding a strong Health & Safety culture, we'd love to hear from you. \n Apply today and help us build a safer future. \n

I have a fantastic opportunity for a mechanically-biassed maintenance engineer to join a well-known company based near Wolverhampton and Dudley. As an engineer you will be tasked with looking after the kit on site and keep downtime to a minimum.My client is looking for a maintenance engineer to join their team on a continental shift pattern. The right person will be a mechanically bias engineer. This is a great opportunity to work with one of the worlds best employers.Maintenance Engineer Role Benefits:Salary £51,247.91Premium overtime rates.Generous holiday entitlement.12% Employer Pension Contribution.Training and progression opportunities.Xmas Bonus.Cycle to work.Volunteering days off. (Paid)Maintenance Engineer Duties include:Continental shift rota. (3s & 2s)Improve and promote safety across site.Focus on departmental KPIs.Identify mechanical faults.Manage and supervise contractors.Shift reports.Planned and reactive maintenance.Identify and procure critical spares.Maintenance Engineer Requirements include:Apprentice trained. (Mechanical)Recognised engineering qualifications.Strong fault-finding capabilities.Health & Safety / Food Safety.Be knowledgeable in using quality assurance systems and standards.SCADA systems (advantageous).Tig welding.Hydraulics and pneumatics.Please apply find out more about this role.This Maintenance Engineer position is commutable from: Wolverhampton, Bridgnorth, Telford, Dudley, Kingswinford, Stourbridge, Wombourne, Bilston, Brierley Hill, and surrounding areas.Please Note: Candidates must have the right to live and work in the UK.Our aim is to help you secure the best possible future for yourself & this is a totally FREE service to all our Candidates.If you believe that your skills and experience match what we are looking for please call me or APPLY and I will be in touch.Should you want to learn more about any of our MAINTENANCE, RELIABILITY & SERVICE ENGINEERING vacancies, or should you just want to discuss your particular needs, then please do not hesitate to contact me to have an informal, confidential chat.Probe Technical Recruitment, providing Maintenance, Reliability & Service Engineering Recruitment Support since 1994TPBN1_UKTJ

I have a unique opportunity for a multi-skilled maintenance engineer to join a global food giant in the Wolverhampton area. You will join the team as a senior maintenance engineer and take on all aspects technical training. You will take, learn and on board all OEM and technical training and develop this into diagnosis packages for team members to follow.My client is looking for a senior maintenance engineer to join their team on a Continental shift pattern. The right person will be a multi-skilled engineer with strong electrical abilities. This is a fantastic opportunity for an engineer looking to take a step up in their career.Senior Maintenance Engineer Benefits:Salary £55,000.00Premium overtime rates.Generous holiday entitlement.Your pension doubled up to 12% (24% all in).Training and progression opportunities.Xmas Bonus.Cycle to work.Volunteering days off. (Paid)Senior Maintenance Engineer Duties include:Continental shift rota. (3s & 2s).Attend OEM and technical training.Take technical lead in fault finding and develop step by step guides for engineers to follow.Create training logs for engineers and apprentices.Hands on maintenance, preventive and reactive.Record engineering work with SAP.Support and cover for engineering supervisors to achieve departmental goals.Senior Maintenance Engineer Requirements:Apprentice trained. (Mechanical or Electrical).Electrically qualified.Experience with PLCs ideally Alan Bradley.Strong IT skills.Strong fault-finding capabilities.Health & Safety / Food Safety.Be knowledgeable in using quality assurance systems and standards.Please apply or call me to find out more about this role.This Maintenance Technical Trainer position is commutable from: Wolverhampton, Dudley, Kingswinford, Stourbridge, Wombourne, Bilston, Brierley Hill, and surrounding areas.Please Note: Candidates must have the right to live and work in the UK.Our aim is to help you secure the best possible future for yourself & this is a totally FREE service to all our Candidates.If you believe that your skills and experience match what we are looking for please call me or APPLY and I will be in touch.Should you want to learn more about any of our MAINTENANCE, RELIABILITY & SERVICE ENGINEERING vacancies, or should you just want to discuss your particular needs, then please do not hesitate to contact me to have an informal, confidential chat.Probe Technical Recruitment, providing Maintenance, Reliability & Service Engineering Recruitment Support since 1994TPBN1_UKTJ

DescriptionJoin us, be part of more.We're so much more than an energy company. We're a family of brands revolutionising how we power the planet. We're energisers. One team of 21,000 colleagues that's energising a greener, fairer future by creating an energy system that doesn't rely on fossil fuels, whilst living our powerful commitment to igniting positive change in our communities. Here, you can find more purpose, more passion, and more potential. That's why working here is #MoreThanACareer. We do energy differently - we do it all. We make it, store it, move it, sell it, and mend it.About your team:At PH Jones, our mission is to mend it.Our teams have been at the heart of communities for over 50 years. Partnering with local authorities and associations, we support social housing across the UK - installing, upgrading and repairing heating and electrical systems. But we're not just living off our legacy. We're on a mission to make the UK's social housing sector greener and more energy efficient.Gas Engineer - Service & Repair Engineer | DudleyWhat We Offer £ 33,302.98 base salary - expected earnings up to £45KFull-Time, Permanent ContractAnnual Pay Review & Profit Share SchemeFully Costed Van & Fuel Card (EV options with free home install)Renewables Upskill PotentialLocal ByBox Allocation - less travel, more earning potentialExceptional Benefits Employee Energy Allowance & Discount on HIVE ProductsCompany-Funded Healthcare + 24/7 Online GP ServiceCompany-matched Pension scheme25 Days Holiday + Bank HolidaysFull Sick Pay after successful probationLife Assurance, Income Protection & Accident InsuranceExclusive Retail Discounts & Financial Education SupportYou will be carrying out repairs and maintenance in domestic Social Housing properties, aiming for first-time fixes with the support of our 24/7 networkWhat we need from you Hold a valid UK driving license with no more than 6 pointsHold the Right to Work in the UKHold 2 year's minimum qualified experienceBe ACS qualified, including CCN1 , CENWAT , HTR1 , & CKR1Exhibit knowledge of all procedures and safety measures to PH Jones and British Gas standards whilst offering excellent customer serviceWhy should you apply?We're not a perfect place - but we're a people place. Our priority is supporting all of the different realities our people face. Life is about so much more than work. We get it. That's why we've designed our total rewards to give you the flexibility to choose what you need, when you need it, making sure that you and your family are supported not only financially, but physically and emotionally too. Visit the link below to discover why we're a great place to work and what being part of more means for you.https://www.morethanacareer.energy/phjonesIf you're full of energy, fired up about sustainability, and ready to craft not only a better tomorrow, but a better you, then come and find your purpose in a team where your voice matters, your growth is non-negotiable, and your ambitions are our priority.Help us, help you. We would love for you to share any information about yourself throughout our recruitment process so that we can better understand you and help shape your journey.TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title : Manual/CNC Cylindrical GrinderReporting To: Team Leader Parts GenerationWork Schedule: Onsite Wolverhampton, GBRAt Moog, we empower you to achieve great things in a supportive, trust-driven environment. Tackle complex challenges with a team that values integrity, collaboration, and innovation. Enjoy job satisfaction, competitive rewards, and a family-like atmosphere where your contributions matter. Grow with talented colleagues who share our passion for shaping the way our world moves.Job SummaryMoog Aircraft Group is looking for an apprentice trained, experienced Manual / CNC Grinder to join the team at our facility based in Wolverhampton on Shifts once training is completed. At Moog we're focused on the customer and for us this means designing complex mechanical products that are often bespoke and high profile. Our Machinists work to exceptionally close tolerance, an essential requirement of the aerospace industry.Responsibilities IncludeExperience in Setting, Operating Manual Cylindrical machines S20/RM250 and Setting CNC ( Preferably Studer S33/S31)Capability of machining exotic and hardened materialsCarry out own 1st off inspection and check/complete the necessary quality documentationPrecision manual cylindrical grinding, working to achieve limits to 0.00005"Able to set and run multiple machine / processes.Key Skills and experience:A recognised engineering apprenticeshipCylindrical grinding experience essentialMate grinding experience preferredPrevious experience within an engineering/manufacturing role within the aerospace industryGood knowledge of machining techniques and appropriate toolingAttention to detail and accuracy and process improvementUsing the relevant inspection techniques/equipment to achieve drawing toleranceThis role will require the individual to work a shift pattern, including nights and overtime when requested.The role requires the candidate to be self-certified and a quality stamp holder after qualifying period.Security ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security.In Return Moog can offer you:You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally.Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension Contribution starting at 6%, Employee Share Option.You Matter at Moog Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Embrace the journey and explore exciting possibilities!Your CV will be stored in our central recruitment database upon applying at Moog.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.TPBN1_UKTJ

I have a fantastic opportunity for a maintenance team leader to join a well-known company based near Wolverhampton and Dudley. As chargehand you will be in charge of a small team of engineers to co-ordinate and initiate engineering activities.My client is looking for a maintenance team leader to join their team on a Continental shift pattern. The right person will be a multi-skilled engineer with no preference. This is a great opportunity to work with one of the worlds best employers.Maintenance Team Leader Role Benefits:Salary £55,000Premium overtime rates.Generous holiday entitlement.12% Employer Pension Contribution.Training and progression opportunities.Xmas Bonus.Cycle to work.Volunteering days off. (Paid)Maintenance Team Leader Duties include:Continental shift rota.Improve and promote safety across site.Lead a team of multi-skilled engineers.Focus on departmental KPIs.Manage and supervise contractors.Shift reports.Planned and reactive maintenance.Identify and procure critical spares.As a Maintenance Team Leader Requirements include:Apprentice trained. (Mechanical or Electrical).Previous experience in team leading role.Strong fault-finding capabilities.Health & Safety / Food Safety.Be knowledgeable in using quality assurance systems and standards.PLC knowledge (advantageous)SCADA systems (advantageous).Please apply find out more about this role.This Maintenance Team Leader position is commutable from: Wolverhampton, Dudley, Kingswinford, Stourbridge, Wombourne, Bilston, Brierley Hill, and surrounding areas.Please Note: Candidates must have the right to live and work in the UK.Our aim is to help you secure the best possible future for yourself & this is a totally FREE service to all our Candidates.If you believe that your skills and experience match what we are looking for please call me or APPLY and I will be in touch.Should you want to learn more about any of our MAINTENANCE, RELIABILITY & SERVICE ENGINEERING vacancies, or should you just want to discuss your particular needs, then please do not hesitate to contact me to have an informal, confidential chat.Probe Technical Recruitment, providing Maintenance, Reliability & Service Engineering Recruitment Support since 1994TPBN1_UKTJ

In a NutshellWe have an exciting opportunity for a Quantity Surveyor to join our team within Vistry North West Midlands within our Divisional Project Team, at our Wolverhampton office. This is a great opportunity for a QS looking for a new challenge, or an Assistant QS looking to make the step up. As our Quantity Surveyor, you will be responsible for managing all costs relating to our projects. Your focus is to minimize the costs of a project and enhance margin and value for money, whilst still achieving the required standards and quality. This will also include procurement, subcontract management inclusive of administration of the contract, monthly payments, and final account settlement.We value in-person collaboration and team culture, but we're also committed to supporting flexible working where possible. We encourage you to raise any specific requirements during the interview process so we can explore how this could be accommodated.Let's cut to the chase, what's in it for youCompetitive basic salary and annual bonusCompany car, car allowance or travel allowanceSalary sacrifice car scheme available to all employeesUp to 39 days annual leave plus bank holidays2 Volunteering days per annumPrivate medical insurance, with employee paid coverEnhanced maternity, paternity and adoption leaveCompetitive pension scheme through salary sacrificeLife assurance at 4 x your annual salaryShare save and share incentive schemesChristmas company shutdownEmployee rewards portal with many more benefitsIn return, what we would like from youBehave in line with our company values - Integrity, Caring and QualityHNC in Surveying or Construction or equivalentExperience of working within the Construction industry for a residential housing developerExcellent IT, analytical and communication skillsStrong mathematical abilityAbility to assess and analyse informationGood business senseGood understanding of budget managementNegotiating and networking skillsCOINs user experienceEnthusiasmFlexibilityAble to work within a busy team and under pressureGood team working skillsAccurate with an eye for detailA methodical approachWilling to work extra to meet deadlines as and when the business needs require itDesirableHND or higher qualificationProfessional membership of MCIOB or RICS preferable or working towards such qualificationNational House builder experienceDifferent methods of construction i.e. Timber FrameMore about the Quantity Surveyor roleWorking closely with other departments, including Land, Development and Construction, you will attend design meetings to advise on all areas that may have a cost implicationAttend development meetings when appropriate.Upon receipt of Contract Documentation, you will be responsible for checking all contract drawings to identify errors, omissions, anomalies and areas where unnecessary cost may ariseReceive initial tender information and assist in the preparation of the proposed tender lists and updating of subsequent procurement programmesDistribute design information packages and tender drawings, whilst preparing all tender documentation and letters including carrying out preliminary checks on subcontractorsPreparing construction cost analysis, which includes analysis of quotations resulting from the tender enquiry, requesting additional and outstanding information as requiredAssess site staffing levels and build programmes with the Construction Director to ascertain preliminary costs, including collating all cost information and preparing the start on site budgetArrange and adjudicate budget settlement meetings, with the support of the wider Commercial teamPrepare stage payment schedules to assist in the financing of the worksCarry out pre-order meetings including all necessary Health & Safety requirements, finalising a tender sum and agreeing a stage payment schedule for payment purposes before preparing all contract documentation and placing the orderPlace subcontractor orders, including interviews and checking references on selected subcontractors. You will then negotiate the contract sum within the budget, including finalising costs to cover all late variationsIssue variation orders and development changes alongside providing cost advice on major variations prior to issue. You will issue revised contract drawings to subcontractors; negotiating the cost of variations including liaising between Buyers and Build Managers. You will provide a full range of pricing information for purchaser's extrasCheck all costs posted to each contract, collate and reconcile all costs resulting from subcontract works, variation orders, site instructions, material order and preliminary / running costs. This will include providing monthly analysis of costs and identify possible areas of over expenditure at future datesCheck and arrange subcontractor payments, obtaining necessary authorisation for passing payments for all elements of subcontractor works. You will agree final accounts with subcontractors, ensuring all works have been carried out within budget and analysing costs to assist on future estimatesTake responsibility for the preparation of documents for the basis of external valuation with the client's agent (CSA, Stage payment schedule, Tick offs)Keep the RAMS schedule updated and issued to all relevant partiesLiaise with the Customer Service department on post-completion defects, providing cost advice where necessaryAttend site meetings, project team meetings, subcontractor meetings and surveying meetings as requiredAny other reasonable duties as directed by your line manager to support the wider teamsFinally, let's tell you a bit more about usWe build more than homes, we're making Vistry. Being a responsible developer and award-winning employer means we live each day through our ethos - doing the right thing. Our behaviours reflect this, as well as our values of integrity, caring and quality. Shaping all we do; they empower us to develop sustainable communities across affordable and private housing. We work in a partnership-led way, and you'll recognise our renowned brands Bovis Homes, Linden Homes and Countryside Homes. Together with Vistry Works, our manufacturing operation, and the functional support of Vistry Services, we're a proud UK Green Building Council member, UK top five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating, and winner of many awards including Top Employer, Global Top Inspiring Workplaces, and Best for Talent Attraction and Outreach.Join us in making Vistry.#LI-AD1TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title:Senior Principal Software EngineerReporting To:Dir. Engineering, Product Integrity & Tech Bus. DevelopmentWork Schedule:Hybrid – Tewkesbury, GBRAbout Moog Aircraft GroupMoog Aircraft Group is a world leader in flight control systems for commercial and military aircraft. We design and manufacture high-performance actuation and control solutions that enable safer, more efficient flight. As part of our team, you’ll work on cutting-edge technologies that power next-generation aircraft.About the RoleWe are seeking a Senior Principal Software Engineer to lead the development of software for advanced flight control and actuation systems. This role requires deep expertise in safety-critical software development, real-time embedded systems, and aerospace compliance standards. You will influence architecture decisions, mentor engineering teams, and ensure our software meets the highest standards of reliability and certification.Key ResponsibilitiesTechnical Leadership: Define software architecture and technical strategy for flight control and actuation systems.System Design: Develop real-time embedded software for actuation systems and flight control computers.Integration: Collaborate with hardware, systems, and test engineers to ensure seamless integration of software with Moog’s actuation products.Compliance: Ensure adherence to aerospace standards such as DO-178C and ARP4754A throughout the development lifecycle.Mentorship: Guide and mentor engineers, promoting best practices in safety-critical software development.Quality Assurance: Drive rigorous verification and validation processes for mission-critical software.QualificationsExperience: 15+ years in software engineering, with significant experience in aerospace or safety-critical systems.Technical Skills: Proficiency in C/C++ for embedded systems; experience with writing software for flight control electronics.Architecture: Expertise in deterministic, fault-tolerant systems for flight control applications.Regulatory Knowledge: Strong understanding of DO-178C certification and related standards.Education: Bachelor’s or Master’s in Computer Science, Computer Engineering, or related field.Preferred QualificationsExperience with model-based development (MATLAB/Simulink).Familiarity with ARINC standards and MIL-STD protocols.Background in flight control actuation and fly-by-wire systems.What We OfferFlexible benefits package and development opportunities to support career progression33 days annual leave (including bank holidays)Private medical insurance, mental health support and financial adviceGenerous life assurance and company pension contribution (from 6%)Employee share options, free onsite parking and EV ChargingYou Matter at Moog – Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.#LI-TB2SummaryLocation: Tewkesbury, GBR; Wolverhampton, GBRType: Full time

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title:Manufacturing EngineerReporting To:Manufacturing Engineering ManagerWork Schedule:Onsite – Wolverhampton, GBRAbout the RoleWe are looking for a talented and driven Manufacturing Engineer to join our team. This is an exciting opportunity to play a key role in developing and improving manufacturing processes for precision-machined components produced from a range of materials.Working closely with Design Engineering, Product Engineering and Operations teams, you will be responsible for introducing robust manufacturing solutions, supporting continuous improvement initiatives, and ensuring products are successfully transitioned into production with a strong focus on Quality, Cost and Delivery.You will also contribute to automation projects, design-for-manufacture activities, and the implementation of Lean manufacturing principles across the business.Key ResponsibilitiesDevelop and optimise manufacturing processes for precision-machined components.Create and maintain machining processes for complex components with tight tolerances.Support Continuous Improvement projects using Lean and Six Sigma methodologies.Drive process improvements focused on safety, quality, efficiency and cost reduction.Provide Design for Manufacture (DfM) guidance during product development.Support APQP activities, including DFMEA, PFMEA, Control Plans and MSA studies.Assist with PPAP activities and GD&T interpretation and application.Design and review tooling and fixturing solutions.Review and approve manufacturing documentation, including Work Instructions (WIs) and Standard Operating Procedures (SOPs).Create and maintain manufacturing routings within SAP/Solumina.Support root cause investigations and corrective action activities.Identify and deliver automation opportunities within the manufacturing environment.Work closely with Manufacturing Engineering, Design Engineering and Operations teams to ensure new products are production-ready.Support the day-to-day operation of the machine shop, minimising downtime caused by process issues.Assist in the delivery of process improvement and automation projects within the prismatic machining cell.Support the Lead and Senior Manufacturing Engineers in achieving departmental objectives and production targets.Skills & ExperienceWe are looking for someone with strong technical expertise and a passion for continuous improvement. Ideally, you will have experience in:EssentialManufacturing Engineering within a precision machining environment.CAD software such as SolidWorks or Siemens NX.CNC machining processes and manufacturing methods.Cutting tool selection and optimisation.Fixture and tooling design.Root cause analysis and corrective action methodologies.APQP and quality improvement tools.Lean Manufacturing and Continuous Improvement techniques.Working collaboratively across engineering and production functions.DesirableCAM programming experience, ideally Edgecam or Siemens NX.5-axis milling process development.NC post-processing knowledge.SAP and/or Solumina experience.Six Sigma qualification or practical application experience.Experience implementing manufacturing automation solutions.Knowledge of PPAP, GD&T and DFSS methodologies.What You'll BringA proactive, solutions-focused approach.Strong problem-solving and analytical skills.Excellent communication and stakeholder management abilities.The ability to manage multiple priorities in a fast-paced engineering environment.A commitment to continuous improvement and operational excellence.Security ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. For further information please visit www.gov.uk.In Return Moog can offer you:You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally.Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options.You Matter at Moog – Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.Apply today to become part of a team that's delivering engineering excellence through innovation, precision and continuous improvement.SummaryLocation: Wolverhampton, GBRType: Full time

Reference: 25819Stratstone Porsche Wolverhampton and Sutton Coldfield Local Business Development Manager Competitive salary, with bonus, pension, life assurance, 33 days holiday (including bank holidays), exclusive company discounts on used car purchases, leasing deals and aftersales services. At

Reference: 25446New Car Sales ManagerStratstoneAudi WolverhamptonCompetitive salary with bonus, company car, pension, life assurance, single health care, 33 days holiday (including bank holidays), exclusive company discounts on used car purchases, leasing deals and aftersales servicesAre you ready t

Health and Social Care Assessor Walsall and Surrounding Areas | Hybrid working Full Time & Part Time Available | Permanent £27,000 - £30,000 per year + bonus + expenses Please only apply if you meet the following essential criteria: • Level 3+ qualification in Health & Social Care, • Minimum 2 years’ recent experience in Adult Health & Social Care (Senior Carer level or above), • Full UK driving licence and willingness to travel Applications will only be considered from candidates who meet all the essential criteria listed above. This role would suit candidates with experience in Adult Care as a Senior Carer, Care Coordinator, Team Leader, Deputy Manager, Registered Manager, Care Manager or an existing Health & Social Care Assessor The Role • We’re recruiting for a Health and Social Care Assessor to support learners working towards apprenticeship qualifications across workplace settings., • You will support, coach and assess learners, helping them develop the knowledge, skills and behaviours required to successfully complete their programme., • You will work with learners across Walsall and surrounding areas, combining remote delivery with planned workplace visits., • You will manage your own diary and workload to meet key performance targets and ensure learner progress., • No learner sourcing is required – all learners are provided, allowing you to focus on delivery, coaching and assessment., • This role is sometimes referred to as Apprenticeship Assessor, Health and Social Care Tutor or Skills Coach within Health and Social Care. Key Responsibilities • Build strong relationships with learners and employers through regular reviews and engagement, • Deliver high-quality teaching, coaching and assessment sessions aligned to apprenticeship standards, • Conduct workplace observations to assess practical competency, • Review learner work and provide timely, constructive feedback, • Support learners with Functional Skills (Maths & English) where required, • Prepare learners for End Point Assessment (EPA), • Monitor learner progress and ensure timely achievement of qualifications, • Promote safeguarding, wellbeing and a safe learning environment at all times Benefits • Home-based role with planned travel (mileage and expenses paid), • 25 days holiday + bank holidays + Christmas & New Year shutdown, • Bonus scheme, • Pension & life assurance, • Health cash plan & wellbeing support, • EV car scheme access, • Access to employee discounts, • Referral bonus, • Plus, many more About t2 Group t2 Group is the UK’s largest health and social care apprenticeship provider, delivering high-quality apprenticeships and professional qualifications. We focus on quality, consistency, and supporting both learners and employers to achieve strong outcomes across the Health & Social Care sector. Apply today to join our team and support the next generation of Health & Social Care professionals.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : Stress Engineer Reporting To: Manager, Engineering Work Schedule: Hybrid Wolverhampton, GBR Moog Military Aircraft Group are recruiting for a Degree Qualified Stress Engineer to join our Commercial Actuation team at our Wolverhampton facility. The ideal candidate for the role should be able to demonstrate at least five years experience in aerospace stress analysis of gearboxes, geared rotary actuators, power drive units, hydraulic manifolds and transmission shafts for high lift actuation or of Horizontal Stabiliser Trim Actuators. If your experience is not within the Aerospace industry, then stress analysis experience of other complex mechanical components and assemblies will be considered. Deliverables include static and fatigue stress calculations, stress summaries and reports and approval of component and assembly drawings. Support to the development department may be required involving compilation or review of test specifications, defining loading cycles for test and reviewing test results. Key Skills and Experience: Proven capability in stress analysis, ideally of high lift actuation components and assemblies Able to prepare stress calculations and reports to a high standard Reviewer of test specifications and reports (QTP, QTR, ATP etc.) Able to manage priorities and multi-task efficiently Contributes to knowledge sharing within the stress analysis group Provide assistance to other stress engineers when required Confident engaging peers, management and customers in stress related discussions Contributes technical knowledge to the Engineering team in support of analysis methods, research activities and failure investigations Knowledge of static (Proof / Ultimate), fatigue and impulse testing is an advantage MRB / Non-conformance experience will be an advantage Experience in hand calculations is essential Experience using Mathcad would be an advantage CAD (SolidWorks or Unigraphics NX) experience is desirable Experience of FEA is required, competence using ANSYS is an advantage Knowledge of aerospace materials, their mechanical, static and fatigue properties and the influence of manufacturing processes on the strength of components will be beneficial. Good communication skills Proactive and driven will make things happen Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : CNC Mill/Turner - MATSURA Reporting To: Management, General Manufacturing & Operations Work Schedule: Onsite Wolverhampton, GBR Aerospace CNC Machine Operator (Matsuura 5-Axis) Join Moog and help manufacture components that support some of the world's most advanced aerospace and defence programmes. At Moog, innovation starts with people. We're looking for an experienced CNC Machine Operator to join our Prismatics team, operating a state-of-the-art Matsuura MAM72 5-Axis Horizontal Machining Centre to produce complex, high-precision aerospace components. If you thrive on machining to tight tolerances, take pride in quality craftsmanship, and want to work in a business known for engineering excellence, we'd love to hear from you. What You'll Be Doing As an Aerospace CNC Machine Operator, you'll play a critical role in delivering precision-machined components that meet the highest aerospace quality standards. Your responsibilities will include: Setting up and operating the Matsuura MAM72 5-axis machining centre Loading programs, fixtures, tooling and components in line with engineering instructions Manufacturing complex components from aluminium, titanium, stainless steel and aerospace-grade alloys Carrying out first-off, in-process and final inspections Interpreting engineering drawings, specifications and GD&T requirements Monitoring tool wear and making offsets and tool changes as required Using precision measuring equipment including micrometers, verniers, bore gauges and height gauges Maintaining accurate production and traceability records Supporting continuous improvement initiatives across the manufacturing area Ensuring compliance with quality, safety and environmental standards What We're Looking For We're interested in candidates who have experience operating advanced CNC machining centres and a passion for delivering exceptional quality. Essential Experience Proven experience operating Matsuura MAM72 or similar 5-axis CNC machining centres Aerospace manufacturing experience Strong understanding of CNC machining principles Ability to read and interpret complex engineering drawings Experience machining to tight tolerances and demanding surface finish requirements Knowledge of aerospace materials including: Aluminium alloys Titanium Stainless steels Experience using precision inspection equipment Strong troubleshooting and problem-solving skills Excellent attention to detail and quality focus Desirable Qualifications & Experience Time-served engineering apprenticeship NVQ Level 3, City & Guilds, or equivalent engineering qualification Experience working within an AS9100 environment Familiarity with Fanuc-based controls Experience of multi-pallet or lights-out manufacturing Crane and lifting equipment certification Why Join Moog? This is an opportunity to become part of a business that is continuing to grow and invest in its people, technology and future. At Moog, you'll find: A culture built on trust, collaboration and innovation Long-term career development opportunities 33 days annual leave (including Bank Holidays) Competitive pension contribution starting at 6% Life assurance cover Employee share scheme Flexible benefits package A supportive environment where your ideas and contributions matter You Matter at Moog We believe our people are our greatest strength. Moog is committed to creating an inclusive workplace where everyone feels respected, valued and empowered to bring their authentic selves to work. We know that diverse perspectives create better solutions, stronger teams and greater innovation. Our commitment to our employees is simple: if we take care of our people, they will continue to deliver exceptional outcomes for our customers, colleagues and communities. Security Clearance This role requires Baseline Personnel Security Standard (BPSS) clearance and successful candidates must be eligible to obtain and maintain this clearance. If clearance cannot be obtained, any offer of employment may be withdrawn on national security grounds. Ready to Apply? If you're an experienced CNC Machinist looking to work on high-value aerospace products within a world-class manufacturing environment, we'd love to hear from you. Apply today and help shape the future of aerospace engineering at Moog. You Can Do This. TPBN1_UKTJ

Here, we craft excellence together. Why Safran? A global presence : Be part of a global aerospace, defence & space business with over 100,000 Colleagues, across 300 sites in 30 countries. Inclusive & empowering environment : We celebrate our differences and believe they make us stronger. We know that a fulfilling work environment is a key driver for innovative ideas and team success. Innovation at the core : Join our mission to decarbonise aerospace and make the world a safer place. Your ambitions can take us further. Mobility & training opportunities : We can support your ambitions with training, development, a personalised career plan and mobility opportunities. If you have big dreams, we'll support you to make them a reality. A culture of excellence : Join a team that values collaboration, integrity, and continuous improvement. Whatever your background, together we aim for excellence. Get involved: We also have a number of groups and forums across our sites that you can get involved with, including Women at Safran, Diversity at Safran, Sports Clubs, STEM ambassadors, Employee Forum, Charity Partnerships and Wellbeing Programs. Maintenance Supervisor Wolverhampton Double Days Shift Pattern Skills: CMMS, Preventive & Reactive Maintenance, Lean Manufacturing, Team Leadership, Continuous Improvement, Root Cause Analysis, Maintaining Shift Schedules Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: Competitive salary and annual bonus and pay review 25 days' holiday + bank holidays Private medical insurance Comprehensive health cash plan Flexible working options Pension (10% employer contribution) and life assurance Early finish on Fridays Professional development, ongoing training, mentoring Onsite amenities: parking, restaurant, bicycle storage, showers Family-friendly and accessible workplace policies About the Role: You will coordinate and prioritise planned and reactive maintenance activities through the CMMS system, manage maintenance resources, support KPI delivery and lead daily team communications. Working closely with production teams, suppliers and technical specialists, you will drive continuous improvement initiatives, support breakdown investigations and help implement long-term solutions that improve equipment performance and reliability. This role combines strong leadership responsibilities with hands-on technical involvement, making it ideal for someone who enjoys solving problems and driving operational excellence within a manufacturing environment. Triage incoming Computerised Maintenance Management System (CMMS) work orders to assign labour for reactive and planned tasks optimising the resource available. Conduct daily team meetings to gather data, address concerns, and keep performance visuals up to date. Review CMMS work orders with maintenance technicians, ensuring they have the tools and support to be effective in their roles. Provide seamless shift handovers and log critical updates. Perform hands-on maintenance duties matching your technical expertise when required. Assist the Equipment Performance team in breakdown investigations to identify permanent fixes and continuous improvement opportunities. What You'll Bring Essential NVQ Level 3 and an ONC/HNC (or equivalent) in an engineering discipline Experience using CMMS systems for work order management, maintenance planning, KPI tracking and reporting Experience leading or managing a small team Desirable Knowledge of Lean Manufacturing principles Experience within an Aerospace or Automotive background beneficial We know that some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert. We encourage anybody to apply if you can demonstrate a variety of skills and experience relevant to the requirements of this role. Please let us know if you would like to discuss any reasonable adjustments to the hiring process that may better facilitate your participation. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : A & T Technician Reporting To: Team Leader (Assembly & Test) Work Schedule: Onsite Wolverhampton, GBR Moog Aircraft Group is seeking experienced Assembly & Test Technicians to join our team at our Wolverhampton facility. At Moog, we focus on the customer, designing complex mechanical products that are often bespoke and high-profile. Our team works to exceptionally close tolerances, an essential requirement of the aerospace industry. We know how important our technicians are to our business, and we offer the opportunity for the development of your skills and progression. Join us and be part of a team that values precision, quality, and innovation to shape the way our world moves. Working 37 hours per week; Monday to Thursday 7.30 am 4.15 pm and Friday 7.30 am 11.30 am. Key Responsibilities: Assembly and test of flight-critical actuators and subcomponents with high precision and accuracy. Using measuring equipment such as micrometers, vernier calipers, and height gauges to inspect component parts. Working from engineering drawings and component maintenance manuals. Completing quality audits and taking responsibility for various aspects of the A&T process, including the release to service of repaired actuators. Key Skills: Apprentice trained (or equivalent level of qualification) ideally within Mechanical Engineering. Proven experience within an engineering/manufacturing role is essential, ideally within aerospace or related industries. Good knowledge of assembly and test manufacturing. Competent in reading and following different set procedures. Experience working within an aerospace quality system is desirable. Dynamic and proactive attitude. Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : CNC Machinist Reporting To: Management, General Manufacturing & Operations Work Schedule: Onsite Wolverhampton, GBR Moog Aircraft Group are currently seeking a skilled CNC Machinist with proven experience operating Mazak 3-axis and 4-axis machines, including complex mill-turn applications to join our team at our Wolverhampton facility. The role involves machining high-precision components from titanium, steel, and aluminum, working to tight tolerances and quality standards in a production or aerospace/precision engineering environment. Programming is not a requirement as all shop programs are produced off-line by our Manufacturing Engineering department, but some ISO/EIA programming experience may be useful in out of hours trouble shooting but not a core requirement. Key Responsibilities Set, operate, and adjust Mazak CNC machines (3-axis and 4-axis), including mill-turn centres. Machine complex components to tight tolerances and high surface finish requirements Work with difficult and exotic materials including titanium, stainless steel, and aluminum alloys Interpret and work from engineering drawings and technical specifications Operators will not normally see a cad model in usual operating conditions. They will work with process stage sketches, tech specs and drawing references where required, using the in-house Solumina interface. Solumina experience will not need to be a requirement here though as it is easily picked up for shop use. Offsetting and tool compensation for process control is essential and some experience of speed / feed use may be preferrable for out of hours troubleshooting. Carry out first-off inspections and ongoing quality checks using a variety of measuring equipment, including CMM machinery. Identify and resolve machining or tooling issues to minimise scrap and downtime Maintain machines and work area to ensure safe and efficient operation Work to production schedules while maintaining quality and safety standards Key Skills & Experience Apprenticeship or NVQ Level 3 (or equivalent) in Engineering / CNC Machining preferred Relevant manufacturing or machining certifications advantageous Proven experience operating Mazak CNC machines Strong background in 3-axis and 4-axis machining Experience with complex mill-turn operations Confident machining titanium, steel, and aluminum Strong understanding of cutting tools, feeds, speeds, and tool life management Excellent ability to read and interpret technical drawings and GD&T Competent with precision measuring equipment (micrometers, verniers, CMM awareness) Strong attention to detail and commitment to quality Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: A longstanding career within a culture of trust and innovation. 33 Days Annual Leave (including Bank Holidays). Benefits include Life Assurance, Company Pension Contribution beginning at 6%, and Employee Share Option in addition to an extensive Flexible Benefits Package, and Hybrid working arrangements. You Matter at Moog Our Mission and Vision At Moog, we believe in the people who work for us. As part of our investment in our people, we make diversity, equity, and inclusion a priority. Our goal is to create a culture where we value, respect, and provide fair treatment and equal opportunities for all employees. Moog aspires to be a diverse, equitable, and inclusive company where employees are empowered to bring their whole, authentic selves to work every day. By recognizing and celebrating our differences, we cultivate an environment thats the right fit for every person inside of it. It is our core belief that if we take care of our employees, they will take care of our customers, partners, shareholders, and communities where we live and work. Working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : Mill/Turner Reporting To: Manager, Manufacturing Work Schedule: Onsite Wolverhampton, GBR Moog Aircraft Group is looking for an apprentice-trained, experienced CNC Machinist (Turner/Mill-Turn) . At Moog, we're focused on the customer and for us, this means designing complex mechanical products that are often bespoke and high-profile. Our Machinists work to exceptionally close tolerance, an essential requirement of the aerospace industry. Key Responsibilities: Set up and operate multiple CNC machines/processes. Perform first-off inspections and complete necessary quality documentation. Capability and competent in setting up and using machine tools Carry out own 1st off inspection and check/complete the necessary quality documentation Proven experience in a machine shop environment Competent in setting up and using machine tools Confident in using precision measurement equipment. Key Experience: Recognised engineering apprenticeship. Previous experience in an engineering/manufacturing role, ideally within the aerospace industry. Strong knowledge of machining techniques and appropriate tooling. Proven skills in a multi-axis/complex machining environment. Attention to detail, accuracy, and process improvement techniques. Proficiency in using relevant inspection techniques/equipment to achieve drawing tolerances. Over 5 years experience on different mill/turn CNC machines (Okuma , Mazak , Lathe, DMG , Matsura, Puma) Additional Information: This role follows a day shift pattern and may in the future lead to a 6.00am - 2.00pm. 2.00pm - 10.00pm or 10.00pm - 6.00am shift pattern. Candidates must be self-certified and hold a quality stamp after the qualifying period. Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension Contribution starting at 6%, Employee Share Options. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. TPBN1_UKTJ

Role Summary An exciting new Senior Divisional Management Accountant opportunity at DX! About Us We think we are more than just a delivery company. We know each item tells a story and we know that for someone, somewhere, it'll make their day, or not - if we fail! DX is the specialist provider of customer-driven solutions for time sensitive, mission critical, high value and heavier items delivery. DX routinely handles goods from many high street retailers and industry sectors including homeware, high street fashion, optical lenses, pharmacy items and jewellery along with legal documents, the UK Government and foreign embassies for identity documents and visas. Our brand is what we do every day and our values set the tone for how we want our colleagues to go about their business of delivering the Delivered Exactly promise. Our goal every day is to deliver on our promises, so you can deliver on yours. What will it feel like to be part of our team? At DX we know our people are our foundation of success. We are passionate about you developing your career with us; if this is part of your plan too, DX will provide the training and the opportunities! Whatever you choose, you will work with a great bunch of people who are focused on meeting the DX Delivered Exactly promise. Why DX? We achieve our outstanding results through our people. Our ability to recruit, train, promote and retain top quality talent is one of our core strengths and has been fundamental to our long term growth. It is our entrepreneurial, dedicated, customer-focused people who are making business happen. They are behind our fantastic success and incredible growth. They are driving us forward as we define the future of work. We recruit ambitious, driven people who bring new ideas that improve our services. If you are energetic and can deliver outstanding results, we will give you the opportunity to build a rewarding and successful career. Role summary: This is a role working closely as a business partner with the Operations and Sales Teams and supporting the Financial Controller with business-critical work The successful applicant will :- Work with all teams to ensure the weekly P&Ls are accurate and submitted on a timely basis, supervising the Management Accountants to ensure this is achieved Assist in carrying out financial reporting, budgeting and forecasting for all locations Ensure that appropriate analysis is provided to the relevant parties on a timely basis and to support with all ad-hoc information requests and long-term projects in support of the operation Assist in the implementation and improvement of systems Key responsibilities: Leading the completion of the Weekly P&L and supporting files and ensuring the weekly timetable is achieved Overseeing the daily reporting process such as revenue, cost and volumes Actively participate and contribute to the preparation of the Depot's budgets to ensure consistency and accuracy in their completion Prepare the depot and National management accounts so that the operational management team can properly assess the financial performance of that location, region or nationally Analysing and understanding variance to budget and prior periods at a depot/region or National level; highlighting any potential areas of concerns to the appropriate people Must be willing and able to visit the depots around the country and assist in training non-financial staff to better use and complete the existing reports Preparation of monthly accruals and prepayment schedules Monthly balance sheet reconciliations Actively lead various ad-hoc projects either requested by the operation/Financial Controller or where the individual believes the work will add value Supporting the Financial Controller in overseeing and guiding all reporting processes on a daily, weekly and monthly basis to ensure they are completed to a high level and to timetable Support with the training and development of two Divisional Management Accountants with a view to take on the day-to-day management of the two accountants in time Knowledge, Skills and Experience: Strong excel skills including working with large amounts of data Ideally, minimum 2-3 years' experience in a finance function; preferably still studying for professional exams The candidate would ideally have experience of supporting a multi-site regional P&L structure Used to working to and achieving tight deadlines while maintaining attention to detail. Experience of preparation of management accounts and involvement in operating profit budgets Ideally have experience of supporting non-finance individuals Financial systems experience desirable Driving licence Person Specification: Keen eye for detail Have a proactive approach to their work Tenacity to ensure business unit timetables are met 'Quality in everything we do, get it right first time' attitude Strong communication skills are essential Have strong analytical and organisational skills and a questioning approach Be a team player with ability to follow procedures and guidelines to achieve successful team outcomes and support the team in achieving their goals/deadlines Benefits: Competitive Rates of Pay Holidays: 25 days increasing with length of service + bank holidays Long Service Recognition scheme Enhanced Maternity & Paternity Company Pension Scheme Life Assurance Employee Assistance programme including 24/7 Virtual GP DX Discounts Portal Excellent opportunities for career progression and more!! We look forward to hearing from you! . TPBN1_UKTJ

MGF are recruiting a Regional Engineer to join our team based in our Rugeley Depot, covering the Midlands. Read on to find out what you will need to succeed in this position, including skills, qualifications, and experience. As a Regional Engineer, you will provide a key link between the engineering and commercial functions. Your goals will be the development of business relationships, attending meetings, understanding, and managing key projects, presenting to customers and the preparation and checking of temporary works designs. At MGF, we add real value to our customers' projects by engaging early in the project lifecycle and providing technical support both on site and throughout the design and delivery process. Through this early engagement, we help identify efficient and practical temporary works solutions, reducing risk and improving project outcomes. We actively contribute to the continuous development of temporary works methods and industry best practice by playing a leading role in the Temporary Works Forum (TWf) and the Shoring Technology Interest Group (STIG). In addition, we promote temporary works awareness and knowledge sharing through our involvement with the Institution of Civil Engineers (ICE). Your key responsibilities may include: Key link between engineering and commercial functions Offering Engineering advice and guidance at meetings Understanding projects and sectors of work in the region Building relationships with key customers and individuals Develop new relationships as and when required. Presentations in different formats (in person and virtual) Production of temporary works designs and drawings. Undertaking checking of designs and drawings Improve MGF brand awareness and personal profile within the region. Learn the effective use of MGF internal systems. Actively contribute to regional sales meetings Attend Regional Engineering and Design meetings as required. Internal design brief training Assisting other areas of the business if value can be added. Business involvement (framework agreements / CPD accreditation / H&S input) The core requirements for this role are: Minimum Bsc / BEng in Civil / Structural Engineering Approx. 2-3 years experience in temporary works The ability to apply knowledge and experience to temporary works solutions. Willingness to apply engineering judgement and take responsibility. A sound understanding of legislation such as CDM 2015. Working knowledge of Design Softwares (Support IT / CAD PWS) CAD / Revit experience A professional manner with excellent communication and people skills The ideal candidate should be working towards achieving professional status or have already attained professional registration with either the Institution of Civil Engineers (ICE) or the Institution of Structural Engineers (IStructE). However, MGF operates an ICE Company Approved Training Scheme and has an excellent track record of supporting engineering staff in achieving professional qualifications. Therefore, candidates must demonstrate a commitment to completing their professional qualifications from the outset. In addition to a competitive salary, we also offer the following: An excellent remuneration package including significant sales commission will be offered to the right candidate Option to purchase additional days of annual leave Additional annual leave awarded to recognise long service Pension Scheme Life Assurance Opportunities for training, development, and career progression Option of taking 2 days Volunteering Leave Discretionary bonus scheme based on business performance Security of working for a well-established & growing company A sense of family is at the core of our company culture Shutdown over the Christmas period Refer a friend scheme Free on-site parking About MGF: MGF is a rapidly expanding, a highly innovative and digitally advanced market leader in the design, manufacture, hire and sale of proprietary excavation support systems to the Construction Industry. Established in 1981, Employing over 450 staff, we operate nationally from 13 locations. We are a highly respected sector leader, well respected for our intelligence, and client focused approach to delivery of projects. We aim to be an equal opportunities employer and welcome applications from all sections of society. xrnqpay All applicants will be treated in the strictest of confidence.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Read the overview of this opportunity to understand what skills, including and relevant soft skills and software package proficiencies, are required. Job Title : CNC/Manual Mate Grinder (Nights) Reporting To: Team Leader Parts Generation Work Schedule: Onsite Wolverhampton, GBR At Moog, we empower you to achieve great things in a supportive, trust-driven environment. Tackle complex challenges with a team that values integrity, collaboration, and innovation. Enjoy job satisfaction, competitive rewards, and a family-like atmosphere where your contributions matter. Grow with talented colleagues who share our passion for shaping the way our world moves. Job Summary Moog Aircraft Group is looking for an apprentice trained, experienced Manual / CNC Grinder to join the team at our facility based in Wolverhampton. At Moog we're focused on the customer and for us this means designing complex mechanical products that are often bespoke and high profile. Our Machinists work to exceptionally close tolerance, an essential requirement of the aerospace industry. Responsibilities Include Experience operating, setting Manual Studer machines S20/RM250 and operating/ setting CNC (Studer S33/S31) Capability of machining exotic and hardened materials Carry out own 1st off inspection and check/complete the necessary quality documentation Precision manual land grinding, working to achieve limits to 0.00005" Able to set and run multiple machine / processes. Night shift (includes a generous shift allowance; note: allowance is not paid during the training period ) Key Skills and experience: A recognised engineering apprenticeship Mate grinding experience required Previous experience within an engineering/manufacturing role within the aerospace industry Good knowledge of machining techniques and appropriate tooling Attention to detail and accuracy and process improvement Using the relevant inspection techniques/equipment to achieve drawing tolerance This role will require the individual to work a shift pattern, including nights and overtime when requested. The role requires the candidate to be self-certified and a quality stamp holder after qualifying period. Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension Contribution starting at 6%, Employee Share Option. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Embrace the journey and explore exciting possibilities! Your CV will be stored in our central recruitment database upon applying at Moog. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). xrnqpay Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Making sure you fit the guidelines as an applicant for this role is essential, please read the below carefully. Job Title : Mill/Turner, Nights - Mazak Work Schedule: Onsite Wolverhampton, GBR Job Description Moog Aircraft Group are currently seeking a skilled CNC Machinist with proven experience operating Mazak 3-axis and 4-axis machines, including complex mill-turn applications to join our team at our Wolverhampton facility. The role involves machining high-precision components from titanium, steel, and aluminum, working to tight tolerances and quality standards in a production or aerospace/precision engineering environment. Programming is not a requirement as all shop programs are produced off-line by our Manufacturing Engineering department, but some ISO/EIA programming experience may be useful in out of hours trouble shooting but not a core requirement. Key Responsibilities Set, operate, and adjust Mazak CNC machines (3-axis and 4-axis), including mill-turn centres. Machine complex components to tight tolerances and high surface finish requirements Work with difficult and exotic materials including titanium, stainless steel, and aluminum alloys Interpret and work from engineering drawings and technical specifications Operators will not normally see a cad model in usual operating conditions. They will work with process stage sketches, tech specs and drawing references where required, using the in-house Solumina interface. Solumina experience will not need to be a requirement here though as it is easily picked up for shop use. Offsetting and tool compensation for process control is essential and some experience of speed / feed use may be preferrable for out of hours troubleshooting. Carry out first-off inspections and ongoing quality checks using a variety of measuring equipment, including CMM machinery. Identify and resolve machining or tooling issues to minimise scrap and downtime Maintain machines and work area to ensure safe and efficient operation Work to production schedules while maintaining quality and safety standards Key Skills & Experience Apprenticeship or NVQ Level 3 (or equivalent) in Engineering / CNC Machining preferred Relevant manufacturing or machining certifications advantageous Proven experience operating Mazak CNC machines Strong background in 3-axis and 4-axis machining Experience with complex mill-turn operations Confident machining titanium, steel, and aluminum Strong understanding of cutting tools, feeds, speeds, and tool life management Excellent ability to read and interpret technical drawings and GD&T Competent with precision measuring equipment (micrometers, verniers, CMM awareness) Strong attention to detail and commitment to quality You will work Monday - Thursday 10pm - 6am and Friday 4pm - 9pm. Shift allowance is 33% Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: A longstanding career within a culture of trust and innovation. 33 Days Annual Leave (including Bank Holidays). Benefits include Life Assurance, Company Pension Contribution beginning at 6%, and Employee Share Option in addition to an extensive Flexible Benefits Package, and Hybrid working arrangements. You Matter at Moog Our Mission and Vision At Moog, we believe in the people who work for us. As part of our investment in our people, we make diversity, equity, and inclusion a priority. Our goal is to create a culture where we value, respect, and provide fair treatment and equal opportunities for all employees. Moog aspires to be a diverse, equitable, and inclusive company where employees are empowered to bring their whole, authentic selves to work every day. By recognizing and celebrating our differences, we cultivate an environment thats the right fit for every person inside of it. It is our core belief that if we take care of our employees, they will take care of our customers, partners, shareholders, and communities where we live and work. xrnqpay Working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.

Here, we craft excellence together. All potential candidates should read through the following details of this job with care before making an application. Why Safran? A global presence : Be part of a global aerospace, defence & space business with over 100,000 Colleagues, across 300 sites in 30 countries. Inclusive & empowering environment : We celebrate our differences and believe they make us stronger. We know that a fulfilling work environment is a key driver for innovative ideas and team success. Innovation at the core : Join our mission to decarbonise aerospace and make the world a safer place. Your ambitions can take us further. Mobility & training opportunities : We can support your ambitions with training, development, a personalised career plan and mobility opportunities. If you have big dreams, we'll support you to make them a reality. A culture of excellence : Join a team that values collaboration, integrity, and continuous improvement. Whatever your background, together we aim for excellence. Get involved: We also have a number of groups and forums across our sites that you can get involved with, including Women at Safran, Diversity at Safran, Sports Clubs, STEM ambassadors, Employee Forum, Charity Partnerships and Wellbeing Programs. Electrical Maintenance Engineer Wolverhampton Night Shift (Monday - Thursday) Skills: Electronic or Electrical Engineering, Facilities, Mechanical systems and drawings, Service engineering, Measuring equipment Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: Competitive salary and annual bonus and pay review 25 days' holiday + bank holidays Private medical insurance Comprehensive health cash plan Flexible working options Pension (10% employer contribution) and life assurance Early finish on Fridays Professional development, ongoing training, mentoring Onsite amenities: parking, restaurant, bicycle storage, showers Family-friendly and accessible workplace policies About the Role: You will play a key role in ensuring maximum uptime of critical production equipment and site services through both reactive and planned maintenance activities for a global leader in aerospace actuation systems. You will conduct electrical fault-finding, diagnosis, repairs, and modifications to high-tech machinery and equipment. Maintain and repair hydraulic test systems, including control systems and associated instrumentation such as load cells or torque transducers. Perform reactive repairs and planned maintenance on CNC equipment. Support maintenance of process equipment, including Heat Treatment and Plating facilities. Interpret and work from electrical schematics and technical documentation. Understand and work with pneumatic, hydraulic, and mechanical systems and drawings. Conduct electrical fault-finding, diagnosis, repairs, and modifications. What You'll Bring Strong working knowledge of CNC machinery. Electrical or Electronic Engineering qualifed to NVQ Level 3 or equivalent. Understand and work with pneumatic, hydraulic, and mechanical systems and drawings. Proven experience in a Maintenance or Service Engineer role. Knowledge of relevant Environmental, Health & Safety legislation. Experience with a range of industrial systems and maintenance practices. We know that some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert. We encourage anybody to apply if you can demonstrate a variety of skills and experience relevant to the requirements of this role. xrnqpay Please let us know if you would like to discuss any reasonable adjustments to the hiring process that may better facilitate your participation.

Job Title – CNC Miller Job Type – Permanent Salary - £48,672 p. Holiday entitlement: 25 days holiday + Bank holidays Additional Benefits: Company pension contribution Profit sharing bonus Life Assurance On-site parking * On going training & development

We are currently recruting for an Estimator, and a Senior Estimator, to work on major civil engineering works on a permanent basis. Working as part of our established estimating team, this role is to provide estimates for civil engineering projects in the water sector. As part of a successful, experienced, and diverse tendering team, the estimator will work alongside other estimators, bid writers, procurement, and business development officers to collectively develop customer solutions and secure work. Key Responsibilities Prepare Estimates Interpreting client tender requirements from PQQ and ITT documentation Take off and review the BoQ's from the client information Prepare estimates in accordance with Company procedures promptly Collate supporting information during the estimating process, including opportunity and risk registers, together with key assumptions registers. Work collaboratively with the Bid Manager, regional business, and planner to agree on methodology and principles. Work alongside the Business Development officers on strategic PQQ's and ITTs. Work in partnership with the procurement team. Prepare the estimating adjudication pack Present the basis of the estimate and key assumptions Maintain notes of adjudication meetings Close out actions and monitor customer negotiations, seeking amended authority as required Handover to site teams at contract award Prepare to estimate the handover pack Present the basis of the estimate and key assumptions Maintain notes of the handover meeting Provide ongoing support to site teams relating to estimating and key assumptions Essential: Estimating and/or operational experience in one or more of the following areas: shafts, tunnelling, pipeline, MEICA, rail civils and groundworks Competence in construction techniques and the associated resource requirements for the above sectors Proficient with tender build-ups Fully conversant with the Microsoft suite of packages Numerate and familiar with estimating software A confident demeanour and the ability to liaise with all levels of personnel and customers Candy Estimating Software or similar,Excel. Autocad. Civil Engineering / Water Industry / Min HNC Civil Engineering or Similar Design & build experience. Civil Engineering Site Management experience preferred. What we offer: Competitive salary Company Pension Life Assurance Private Medical 25 days of annual leave in addition to 8 public bank holidays and loyalty days 8 hours volunteering Employee Assistance Programme to support your mental, physiological and financial wellbeing Flexible benefits via salary sacrifice Company car/green car scheme/car allowance/Van (dependent on position) Leadership & management training and coaching Regular line management engagement and appraisal to support your career progression Development supported by internal and externally delivered training Continuous service awards TPBN1_UKTJ

Take control of your time with hybrid working and a Monday to Friday schedule. Youll enjoy a better work-life balance with no shift patterns, allowing you to plan your life around your work. With a professional setting and structured hours, youll avoid the chaos of ward-based nursing and focus on delivering quality assessments. Plus, youll get time built into your day for breaks, CPD, and team meetings. Earn more as you progress through the training stages, starting with a £39,500 rising to £40,500 upon achieving DWP approval, with the potential to earn performance related bonuses your OTE will be around £44,550. Youll also benefit from 25 days holiday, rising to 27 with service, and additional perks like a matched pension, life assurance, and access to wellbeing programmes. What youll do Youll provide comprehensive assessments for the Governments disability allowance (PIP), delivering face-to-face and virtual assessments, telephone assessments, initial review calls and paper-based reports (PBR). Managing your own caseloads gives you variety and autonomy, allowing you to shape each case with your expertise. Youll assess a full range of conditions, including physical, sensory, mental, intellectual and cognitive impairments. What youll need Qualified Nurse, Mental Health Nurse, Occupational Therapist, Physiotherapist or Paramedic At least one year of experience after qualification Valid registration on NMC or HCPC without restrictions Strong communication skills and IT literacy will help you succeed, as youll be working with a wide range of service users and digital systems. About the company The Disability Service is a leading, multi-national employer. The full-time training lasts five weeks and will help you build the skills needed to carry out these specialist assessments. TPBN1_UKTJ

Further your career and take on a new challenge as a Functional Specialist! We are recruiting for hybrid working Nurses, Physiotherapists, Occupational Therapists and Paramedics to make the most of their existing clinical knowledge and take on a new role with a leading, multi-national employer with Full time roles available. As a Functional Specialist you will be providing unbiased, comprehensive assessments for the Governments disability allowance (PIP) whilst ensuring a personalised, inclusive and empathetic service for the service user. Benefits Include: Starting salary of £39,500 + Bonus A competitive basic starting salary of £39,500 increasing to £40,500 on achieving DWP approval Once approved you will be eligible for the bonus scheme subject to quality and performance Hybrid, Full time Training: Full time, 5 weeks 25 days Holidays per annum, rising to 27 days with service Company Laptop and Mobile Phone provided Access to Health & Wellbeing programme and Headspace mobile app Annual charity day Employee network groups Company matched pension Life assurance 15 weeks paid maternity Cycle2work scheme Your New Role: As a multi-skilled Functional Specialist, you will manage caseloads from end to end which includes delivering face to face and virtual assessments, telephone assessments, initial review calls and paper based reports (PBR). As a multi-skilled Functional Specialist, you will have greater job variety and autonomy to manage cases to conclusion. You will assess the full range of health conditions and disabilities affecting the claimant, including physical, sensory, mental, intellectual and cognitive impairments. You will have time built into your working rota for breaks, CPD, audit amendments, requesting and reviewing further evidence and team meetings. Requirements Qualified Nurse, Mental Health Nurse, Occupational Therapist, Physiotherapist or Paramedic. 1+ years post qualification experience. Valid registration on NMC or HCPC without restrictions. Excellent communication skills and strong IT literacy. TPBN1_UKTJ