Trabajos train operator en New York, New York - Page 4Crear alertas

Job DescriptionTitle: OCC Console Train Dispatcher, Assistant Train Dispatcher and Train Service Supervisor Opens: July 31, 2026Closes: August 30, 2026Authority: TADepartment: SubwaysDivision/Unit: Service Delivery/Operations Control CenterReports to: Superintendent, Control Center, OCC Location: Operations Control Center, Manhattan (Midtown)Hours of Work: Various ResponsibilitiesThe Operations Control Center (OCC) is recruiting for highly experienced and motivated Operating Supervisors in the Department of Subways. Selected candidates will be subject to a skills assessment evaluation. The OCC’s Console Train Dispatchers (CTD) serve as the operation’s frontline, expert, incident- management team. CTDs directly receive incoming information, including emergency communications, from various internal and external sources (e.g., field-based personnel), analyze the information quickly, devise safety-critical service-oriented solutions, and direct real-time decisions to emergency responders for immediate implementation and disposition. The goals are the safe resolution of reported incidents (e.g., mechanical failures, derailments, floods, fires, etc.) and resumed customer service. Highly motivated and skilled CTDs, who demonstrate a passion and commitment to performing the CTD function with attention to detail, are absolutely critical to the success of both the Subway Operation and New York City Transit at large. As the OCC operates 24 hours/7 days a week, including weekends and holidays, CTD’s will be required to work various days and tours. These varying work assignments will be determined by the needs of service. A CTD’s primary function is responding to incoming communications (e.g., radio calls) from train crews, field supervision, towers, and external agencies, providing incident management oversight under the supervision of a Desk Superintendent. During emergencies, OCC CTDs ensure the safety of maintenance crews working on the roadbed as well as the safety and security of customers and employees by directing inter- and intra-agency personnel on emergency procedures and mitigating service interruptions. They direct required emergency actions in compliance with applicable rules, regulations, policies, and procedures. They also conduct investigations on train delays and prepare reports describing the incidents that occurred within their area of responsibility. They cooperate with OCC-based Service Delivery personnel, field-based Line Superintendents, Train Service Supervisors, Train/Yard Dispatchers, and other Train Service personnel during emergency incidents and supervise delay-management efforts during unexpected service disruptions. CTDs may also be assigned to a service-regulation job, as needed and at the discretion of OCC management. CompensationAnnual Base Salary + Assignment Differentials for Console Operator titles in the Operations Control Center: Asst. TD(Console) TD (Console) TSS (Console) Entry Level$80,401 +$5,115$86,328 + $3,617$90,128 +$2,478 2nd year$80,401 +$10,230$91,642 + $3,617$95,680 +$2,478 3rd year$80,401 +$15,345$102,268 + $3,617$106,786 +$2,478 4th year$94,357 +$20,460$107,584 + $7,233$112,339 +$2,478 EligibilityAll NYCT Assistant Train Dispatchers, Train Dispatchers and Train Service Supervisors are eligible to apply. Desired Skills • Comprehensive knowledge of NYCT and Service Delivery rules, regulations, policies, and procedures., • Ability to work effectively in a fast- paced, communications-heavy environment., • Ability to manage multiple responsibilities and tasks with superior attention to detail., • Familiarity with operations in Sub-divisions A, B and C., • Strong analytical, critical-thinking, and decision-making skills Excellent verbal and written communication skills., • Strong computer skills, including comfort with learning new applications and programs., • Strong interpersonal skills, including the ability to provide clear concise direction during major incidents. Other InformationPursuant to the New York State Public Officers Law & the MTA Code of Ethics, all employees who hold a policy making position must file an Annual Statement of Financial Disclosure (FDS) with the NYS Commission on Ethics and Lobbying in Government (the “Commission”).Equal Employment OpportunityMTA and its subsidiary and affiliated agencies are Equal Opportunity Employers, including with respect to veteran status and individuals with disabilities.The MTA encourages qualified applicants from diverse backgrounds, experiences, and abilities, including military service members, to apply.To be eligible for consideration for a new role, current MTA employees must complete at least one year of service in their current role prior to applying. This requirement applies to candidates applying to internal/lateral postings within the same title. Additionally, eligibility to interview is contingent upon maintaining a satisfactory record of job performance, attendance, and disciplinary conduct.

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees in our climate-controlled plants. Summary: The Assistant Press Operator assists the Press Operator and Lead Press operator in the basic setup and maintenance of the presses verifying proper paper sheet sizes and types. They are also responsible for ensuring that all presses are supplied and fed with required quantities of paper and other consumables. Schedule: 2nd shift, Monday - Friday, eight or more hours per day, five days per week based on business needs. Primary schedule will be 2:00 PM – 10:00 PM, or similar. Training may occur at other times. Salary Range: $19.00 To 25.00 Hourly Compensation commensurate with experience. At time, we are not engaging with agencies or third-party recruiters. Thank you for understanding. DUTIES AND RESPONSIBILITIES • Assist press operators in setting up, adjusting, and maintaining printing presses to ensure optimal performance., • Load and unload paper, ink, and other materials onto the press, ensuring that stock is properly aligned and ready for printing., • Monitor print runs for quality, ensuring color consistency, proper alignment, and overall print quality. Report any issues to the press operator immediately., • Assist in mixing ink and maintaining proper ink levels for consistent color reproduction throughout production runs. Ensure that inventory levels for materials are regularly checked and maintained., • Identify minor technical issues with the press and assist in troubleshooting and resolving them under the guidance of the press operator., • Clean presses, rollers, and other equipment regularly to ensure optimal printing conditions and prevent malfunctions., • Provide general support to the production team, including preparing materials for upcoming jobs, organizing job orders, and ensuring that all tools and equipment are properly prepared and cleaned., • Actively remove waste items for recycling, • Complete and process all required paperwork, records, documents, etc., • Regularly perform general housekeeping duties in your work area(s), • Adhere to all safety policies and protocols and maintain a safe working environment, • Assist in cultivating an interdependent safety culture by reporting workplace hazards, related injuries, illnesses and or/near misses to management immediately, • Attend all department/company meetings, • Wear all assigned Personal Protective Equipment (PPE) when required, • Other duties as assigned For an extensive list of responsibilities, duties and physical demands/work environment please refer to the attached Job Description. EXPERIENCE AND QUALIFICATIONS EDUCATION, LICENSES, CERTIFICATIONS, EXPERIENCES: • 1 year experience of working within a fast-paced production or manufacturing environment, • High School Diploma or GED equivalency, preferred CRITICAL KNOWLEDGE, SKILLS, AND ABILITIES REQUIREMENTS: • Problem-Solving and Adaptability: Strong problem-solving skills when faced with unexpected challenges, such as machine malfunctions, material shortages, or errors in print quality. Ability to adapt to new printing technologies or changes in production schedules, ensuring smooth operations despite changes., • Time Management & Efficiency: Ability to manage multiple print jobs simultaneously, ensuring deadlines are met without sacrificing quality. Organizing workflows, preparing materials in advance, and optimizing print runs for efficiency and cost-effectiveness., • Attention to Detail: Precision in monitoring print jobs to ensure all details, such as color accuracy, image sharpness, and print placement, meet the required standards. Detecting small defects or inconsistencies during production and taking corrective action immediately., • Communication Skills: Ability to read and understand corporate policies, job-related documents, and written/verbal instructions in English to ensure effective and compliant job performance., • Strong foundational math skills, with the ability to perform basic operations including addition, subtraction, multiplication, and division., • Highly detail-oriented, organized, and efficient in managing time, with a proven ability to meet deadlines and complete tasks accurately. 4OVER COMPANY HISTORY 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- • Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care, • 4over pays 100% of the employee’s premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000, • Coverage will be effective on the 1st of the month following 1 month of continuous regular full-time employment 401(k) Retirement Plan • New employees are eligible to enroll the first of the month, following 1 month of employment, • Semi-annual open enrollment (January 1st and July 1st), • Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation, • Immediate Vesting Holidays and PTO • 9 Paid Holidays, • Accumulating PTO to be used after 90-days of continuous and active full-time service 4over is an Equal Opportunity employer. It provides equal employment opportunities to all employees and applicants for employment without regard to race, color, sex, national origin, age, religion, disability, or any other legally protected status and takes affirmative action to recruit, employ, train, and promote qualified minorities, women, covered veterans, and individuals with disabilities.

Job Description Job Title: Production Operator Location: Lyndhurst, NJ Type: Contract To Hire Compensation: $20.00-$20.50 (based on shift) Work Model: Onsite Hours: D-SHIFT Thursday-Sunday/Friday-Sunday; from 6pm-6:30am, will train on A-Shift Monday-Wednesday/Monday-Thursday; from 6am-6:30pm 2nd SHIFT 2pm-10:30pm will train on 1st shift Mon-Friday; from 6am-2:30pm 3rd SHIFT Monday-Friday; from 10pm-6:30am; will train on 1st shift Mon-Friday; from 6am-2:30pm Responsibilities • Operate manufacturing and/or packaging line(s) to ensure maximum production quantity and quality, supporting company policies, goals, and objectives for an 8 or 12-hour shift., • Tend manual or semiautomatic systems processing chemical substances into products such as sealants, adhesives, mortars, primers, and intermediates., • Load solid materials into heating/cooling vessels or blending tanks, and set controls or operate valves to feed materials through equipment., • Observe chemical reactions, monitor gauges, signals, and recorders, and receive notifications to adjust operating parameters as needed., • Draw samples for quality control analysis and perform chemical tests/QC checks to ensure product conformance with specifications., • Utilize forklift to package, palletize, shrink-wrap, and stage products into designated areas or onto trucks for transportation., • Perform related duties and assist with special projects as assigned, ensuring conformance with safety rules to maintain plant safety. Requirements, • High School graduate; trade school certification in electronics or related field a plus, • Ability to read, write, and comprehend documents in English, • Able to lift up to 74 lbs. repeatedly throughout the work shift, • Ability to understand, analyze, and resolve technical problems in the work area, • Ability to work the shift schedule where opening exists System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job DescriptionLead Operator Location: Orangeburg, NY Shifts Available: 1st & 2nd Shift Start: Quick Start AvailableWe're looking for experienced Lead Operators to join a growing manufacturing team in Orangeburg, NY. This is a hands-on leadership role responsible for supporting daily production, ensuring quality standards, and helping the team meet production goals in a fast-paced environment. Responsibilities: • Lead and support machine operators to achieve daily production goals., • Review production schedules, work instructions, and job specifications., • Coordinate machine changeovers and ensure materials and staffing are ready., • Perform and document quality checks throughout production., • Complete production reports, transfer tickets, labels, and other required documentation., • Monitor production efficiency and address quality or machine issues., • Work closely with mechanics, quality control, and supervisors to resolve production concerns., • Ensure compliance with all safety policies and report incidents or near misses., • Help train and support team members while promoting continuous improvement. Requirements: • 1–2 years of manufacturing experience, including leadership or lead operator experience preferred., • High school diploma or GED preferred., • Must be able to communicate in English (reading, writing, and speaking)., • Must pass a pre-employment drug screen and background check., • Reliable transportation to and from work is required., • Ability to lift up to 50 lbs., • Ability to stand and walk throughout the entire shift., • Strong leadership, communication, and problem-solving skills., • Basic computer skills and experience completing production documentation., • Willingness to work overtime as needed. Work Environment: • Manufacturing/production facility., • Standing, walking, bending, and repetitive motion throughout the shift., • Exposure to machinery noise and varying temperatures., • Personal protective equipment (PPE) required., • Overtime may be available based on production needs. Apply today for a quick start! Immediate openings on 1st and 2nd shift.

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees in our climate-controlled plants. Summary: The Cutter Operator I is responsible for the setup, adjustment, and safe operation of all cutting equipment to prepare product to be packed, collated, or bound, ensuring the meeting of customer specifications, in accordance with company policies and procedures. Schedule: 1st shift, Monday-Friday, eight or more hours per day, five or more days per week based on business needs. Primary schedule will be 6:00 AM – 2:00 PM, or similar. This is an on-site position requiring the employee to be present physically. Salary Range: $17.00 To 19.00 Hourly Compensation commensurate with experience. At this time, we are not engaging with agencies or third-party recruiters. Thank you for your understanding. • Maintain and operate batching system to ensure the completion of assignments, • Identify priority jobs to be completed, • Review job tickets and strategically plan work processes to meet customer specifications for custom jobs, • Troubleshoot machines, if possible, to resolve any problems and/or notify production management, • Replace worn cutting blades with hand tools, as required, • Set up job assignment specifications, obtain approval and run product once authorized by supervisor or Plant Manager, • Monitor apparatus during run, adjust as needed to ensure adherence to specification including operating speed, • Complete and process all required paperwork, records, documents, etc., • Regularly perform general housekeeping duties in your work area(s), • Adhere to all safety policies and protocols and maintain a safe working environment, • Assist in cultivating an interdependent safety culture by reporting workplace hazards, related injuries, illnesses and or/near misses to management immediately, • Attend all department/company meetings, • Other duties as assigned For an extensive list of responsibilities, duties and physical demands/work environment please refer to the attached Job Description. Qualifications EDUCATION, LICENSES, CERTIFICATIONS, EXPERIENCES: • High School Diploma or GED equivalency; or one-year related experience with Polar or Saber cutting machines in a manufacturing environment and/or training; or equivalent combination of education and experience, preferred CRITICAL KNOWLEDGE, SKILLS, AND ABILITIES REQUIREMENTS: • Ability to read and comprehend job assignment tickets and customer instructional specifications, • Basic computer knowledge, • Effectively communicate with all members of the organization, • Excellent attention to detail, • Quality, production, and team oriented, • Mechanically inclined, • Ability to adapt to schedule changes based on the needs of production, • Ability to cross train and work in other departments and/or machines 4over Company History: 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- • Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care, • 4over pays 100% of the employee’s premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000, • Coverage will be effective on the 1st of the month following 1 month of continuous regular full-time employment 401(k) Retirement Plan • New employees are eligible to enroll the first of the month, following 1 month of employment, • Semi-annual open enrollment (January 1st and July 1st), • Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation, • Immediate Vesting Holidays and PTO • 9 Paid Holidays, • Accumulating PTO to be used after 90-days of continuous and active full-time service 4over is an Equal Opportunity employer. It provides equal employment opportunities to all employees and applicants for employment without regard to race, color, sex, national origin, age, religion, disability, or any other legally protected status and takes affirmative action to recruit, employ, train, and promote qualified minorities, women, covered veterans, and individuals with disabilities.

Job Description A machine job shop has immediate openings available for CNC SET UP PERSON, MACHINE OPERATORS, Tool Makers, Press Set up, Machinist, Programmers, Shop Floor Planners, Set-up, and Operators in our CNC and Manual departments for 1st ,2nd, and 3rd shifts. We seek experienced individuals to setup and operate the following CNC Lathes, CNC Mills, WaterJet, Laser, Swiss Screw Machines and Wire EDM equipment. Programming and manufacturing experience REQ “D (WE WILL NOT TRAIN YOU, ONLY PERSONS WITH EXPERIENCE PLEASE APPLY) Candidates must work independently and have 3 + years’ experience. We use late model equipment from Mori Seiki, Fadal, Star, Flow, Amada and Mitsubishi. Our facility is ISO 9001:2000/ AS 9100, The shop is temperature controlled (winter and summer). We offer competitive salary per hour based on employee experience and capabilities: a sign up bonus potential, 401K retirement plan with matching percentage , Year End Bonus, Paid Vacations, Holidays, Sick Days, Life Insurance and Vision. Requirements: Metal working experience Auto CAD/CAM experience is a must for programmers. The ability to operate a CNC machining center for operator employment. The ability to fix minor machine hardware and software problems for set up persons if required. The ability to foresee problems before they occur and correct them at the programming phase. The ability to think out of the box, while being able to take direct instruction. The know-how to read, examine, and understand blueprints. The ability to draft and correct if and when needed for programmers Work overtime and Saturdays as needed. The ability to occasionally direct people. The ability to bring new ideas to our company We offer benefits and vacation after 3 months of employment. We offer Paid Holidays We offer paid Sick days We offer 401k matching We offer Eye Care Insurance We also offer competitive and fair compensation. We are a well-established firm located in the New York Metro area. Please contact us to schedule an interview. Please E-mail your resume and references.

Job DescriptionFabrication OperatorFairfield, NJFull TimeEntry LevelFabrication Operator in Fairfield, NJ 1st Shift Pay $17.50 per hour – $19.75 Based on experience Fulltime, Benefits, and Weekly Pay iBoost Talent is hiring for a Full-Time Fabrication Operator with Turret Punch Press experience in Fairfield, NJ. Impact is proud to offer an industry leading benefits and wellness package, with eligibility for some programs beginning Day 1! Our positions are full-time, year-round employment with paid training. We offer: • 5 Days of PTO, • 6 Paid Holidays, • Paid Sick Leave, • Up to 50% of health insurance premiums paid, • Access to a retirement plan, financial fitness, and employee savings programPay $17.50 – $19.75 per hour based on experience 1st Shift Hours - 6:00am – 2:30pm Mon – Fri Job Summary: This position is responsible for safely setting up, operating, and shutting down various CNC fabricating, forming & VMC Machines. This position will have the responsibility to ensure the machine parts and production units are meeting or exceeding the required quality standards. Work assignments will be scheduled based on training proficiency. Duties and Responsibilities: • Set up and inspect the first piece against engineering drawings, ensuring accurate information transfer for efficient production runs., • Conduct routine quality control checks during setup and production, addressing any issues promptly., • Collaborate with the Supervisor and Team Leader to prioritize tasks according to the job board., • Organize, sharpen, and maintain tools and dies as needed., • Train operators based on Supervisor's instructions and plan for upcoming jobs by preparing materials and paperwork in advance., • Perform routine setup, troubleshooting, and machine maintenance, including cleaning and checking tools., • Communicate with management regarding any issues and the priority of upcoming setups., • Conduct basic quality checks and make necessary adjustments to ensure parts meet specifications., • Load and unload machines, verifying correct part processing., • Perform lower-level tasks such as filing and sanding as required., • Adhere to safety rules and maintain good housekeeping practices., • Report hazardous situations and participate in safety programs., • Lead or participate in Continuous Improvement Teams and maintain a clean workstation according to 5S procedures., • Support overall departmental and corporate goals by performing additional duties as assigned.Job Requirements:, • Basic math, communication, and troubleshooting skills., • Proficiency in using measurement tools (e.g., tape measure, calipers) and interpreting engineering drawings and BOMs., • Ability to follow directions and work independently with minimal supervision., • Flexibility to adapt to changing priorities and tasks., • Mechanical aptitude and problem-solving skills., • Experience in setting up and operating CNC equipment., • Team-oriented with the capability to train others in CNC techniques., • Reliability in attendance and punctuality., • Understanding of basic lean principles (5S, Kanban)., • Proficiency in English is preferred.Education and Experience:, • High school diploma, GED, or technical certification preferred., • Minimum of 4 years of experience operating specialized equipment or 3 years of CNC setup experience.Working Conditions/Physical Demands:, • Stand for 8 hours a day, performing coordinated hand movements and frequently lifting up to 50 lbs., with occasional lifting up to 100 lbs., • Tasks may involve repetitive motions, overhead reaching, bending, and exposure to sharp edges, dust, and high noise levels., • Work in a non-temperature-controlled environment; steel-toed shoes are required.

Job DescriptionDescription: Job Overview: The key function of the Assistant Club Manager will be to help the Club Manager run the day to day operations of the club. The Assistant Club Manager will be an active participant of the team and will play a key part in creating a great place to work – and workout – for all Members, Guests, and team mates throughout the entire club. Responsibilities: • This is a varied role, involved with everything from member experience to team development, you will support the Club Manager in the following:, • Drive sales through successful tour execution and lead generation activity, • Execute all initiatives that support the delivery of the Blink member experience, • Manage the staff on day to day performance, • Assist in driving Personal Training revenue, • Interview, hire, train and develop new staff members, • The Assistant Club Manager will be directly responsible for:, • Conduct weekly inventory, including retail, beverage, marketing collateral and maintenance supplies, • Place monthly supply orders and retail orders as needed via the Blink web portal, • Create Front Desk and Maintenance schedules, • Order drinks weekly, • Manage entire cash reconciliation and deposit process, • Receive and adjust all retail inventory via club management software, • Complete onboarding of all new associates, • Team Responsibilities:, • Facilitate new Member sign up and Guest trial transactions, • Maintain our levels for cleanliness and organization of all areas in the Club, • Maintain high visibility throughout the Club, • Ensure the safety of Members, Guests and Team, • We take pride and have fun Requirements: Qualifications: • Proven leadership ability in an educational, fitness or professional setting, • Minimum one (1) year management/key holder/MOD experience in a customer service business, • Proven ability to direct and train team, • Excellent verbal and written communication skills, • Possess honesty and personal integrity, • Enthusiastic, energetic, friendly and personable, • Passionate, intelligent and knowledgeable regarding the fitness industry, • Current CPR/AED certification, • Computer literate on the Microsoft Suite, • Hardworking and diligent, • Excellent time management, organizational, problem solving and follow-up skills Compensation & Benefits: • Career Advancement opportunities, • Complimentary Gym membership, • Paid vacation time, • Fun working environment!, • Pay Transparency: Min $16.50 – Max $19.00/hr About Blink Fitness (PureGym Group): The PureGym Group is a leading gym operator headquartered in the UK, boasting over 600 locations and more than 2 million members worldwide. We're thrilled to announce our expansion into the United States! Our commitment to providing high-quality, affordable gyms for everyone, everywhere, remains unwavering. Our mission to inspire healthier nations has made us the UK's favorite gym, and now, an international success story. With our unique "Everybody Welcome" approach, we create a friendly, warm, and inclusive environment for all our employees and members.

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. We take pride in fostering a safe environment for all employees. Summary: The Packer is responsible for packing finished printed materials to meet customer specifications, ensuring quality standards are upheld, and supporting the smooth flow of work in the cutting department. This position plays a critical role in the final stage of production by preparing completed jobs for shipment or delivery, maintaining accurate documentation, and ensuring all materials are handled safely and efficiently. Schedule: 2nd shift, Monday - Friday, eight or more hours per day, five days per week based on business needs. Primary schedule will be 2:00 PM – 10:00 PM, or similar. Training may occur other times. Salary Range: $16.00 To 19.00 Hourly Compensation commensurate with experience. At time, we are not engaging with agencies or third-party recruiters. Thank you for understanding. DUTIES AND RESPONSIBILITIES • Work in collaboration with main Cutter Operator for provided instructions which will indicate specifications of form/batch cuts, • Identify quantity of form and type of stock to secure correct boxes for packing of product, • Off-load product from cutter tables and ensure order sticker label is eligible and visible for delivery, • Conduct initial inspection of products to ensure quality control, • To ensure compliance of orders, track inventory by physically counting product orders by order number, • Accurately and safely box completed jobs and notify quality control teammate/supervisor when completed boxes are ready for inspection, • Ensure materials on hand are organized and replenished, • To include boxes (to be made and kept on hand at inventory standard), tape guns, filling, chipboard dividers, markers, others as needed, • Place boxes in appropriate and safe floor locations under/near packing table, • Maintain bins, when full relocate to back lot for recycling and replace with empty bin, • Ensure set up is complete for shift change, • Report all injuries, illnesses, and near misses to management immediately, • Adhere to all safety rules and regulations as set forth by 4over, • Complete and maintain required records and paperwork, as needed, • Perform regular housekeeping duties in assigned and surrounding areas, • Wear all assigned Personal Protective Equipment (PPE) when required, • Attend all department/company meetings, as needed, • Perform other assigned duties For an extensive list of responsibilities, duties and physical demands/work environment please refer to the attached Job Description. EXPERIENCE AND QUALIFICATIONS EDUCATION, LICENSES, CERTIFICATIONS, EXPERIENCES: • High School Diploma or GED equivalency, preferred; or one to three months related experience in a manufacturing environment and/or training; or equivalent combination of education and experience CRITICAL KNOWLEDGE, SKILLS, AND ABILITIES REQUIREMENTS: • Problem-Solving and Adaptability: Strong problem-solving skills when faced with unexpected challenges, such as machine malfunctions, material shortages, or errors in print quality. Ability to adapt to new printing technologies or changes in production schedules, ensuring smooth operations despite changes., • Time Management & Efficiency: Ability to manage multiple print jobs simultaneously, ensuring deadlines are met without sacrificing quality. Organizing workflows, preparing materials in advance, and optimizing print runs for efficiency and cost-effectiveness., • Attention to Detail: Precision in monitoring print jobs to ensure all details, such as color accuracy, image sharpness, and print placement, meet the required standards. Detecting small defects or inconsistencies during production and taking corrective action immediately., • Communication Skills: Ability to read and understand corporate policies, job-related documents, and written/verbal instructions in English to ensure effective and compliant job performance., • Strong foundational math skills, with the ability to perform basic operations including addition, subtraction, multiplication, and division., • Highly detail-oriented, organized, and efficient in managing time, with a proven ability to meet deadlines and complete tasks accurately. 4OVER COMPANY HISTORY 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- • Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care, • 4over pays 100% of the employee’s premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000, • Coverage will be effective on the 1st of the month following 1 month of continuous regular full-time employment 401(k) Retirement Plan • New employees are eligible to enroll the first of the month, following 1 month of employment, • Semi-annual open enrollment (January 1st and July 1st), • Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation, • Immediate Vesting Holidays and PTO • 9 Paid Holidays, • Accumulating PTO to be used after 90-days of continuous and active full-time service 4over is an Equal Opportunity employer. It provides equal employment opportunities to all employees and applicants for employment without regard to race, color, sex, national origin, age, religion, disability, or any other legally protected status and takes affirmative action to recruit, employ, train, and promote qualified minorities, women, covered veterans, and individuals with disabilities.

Third-Party Asset Management | Client-Owned Multifamily Asset, North Carolina Greensboro, NC | Full-Time | Remote Founded in 2014, Red Cedar Homes is the Carolinas' premier home builder, building infill and elevated communities from Greenville, South Carolina to Charlotte, North Carolina. Our mission is to build communities where people want to live, and our goal is to become a top 100 U.S. homebuilder by 2030.We run the full cycle. We entitle, develop, build, and sell, and we also acquire finished and developed lots from other developers. Our platform spans for-sale single-family and townhome subdivisions, build-to-rent communities, scattered-lot residential strategies, and multifamily.Alongside the assets we own, Red Cedar Homes provides asset management services to outside ownership groups who want an experienced local operator representing their interests in the Carolinas. We are hiring an Asset Manager whose primary assignment is one of those engagements: a client-owned property in North Carolina. Position Summary This role exists to serve a client. The Asset Manager will act as the owner's representative for a property in North Carolina that is owned by a Red Cedar Homes client, not by Red Cedar Homes. Every decision, report, and recommendation is made on behalf of that owner and in the owner's best interest.The assignment has two halves that work together. The first is managing the asset itself: owning the business plan, the operating budget, performance against plan, capital projects, lender and compliance obligations, and the reporting that goes back to the client. The second is managing the third-party property management company: setting expectations, holding them accountable to the budget and the business plan, reviewing their reporting, and escalating quickly when execution slips. This is a true asset management role. It is not an accounting role. Day-to-day accounting and bookkeeping sit with the accounting function. The Asset Manager is focused on performance, oversight, strategy, reporting, and value creation.We are looking for someone with real multifamily asset management experience who can step in and take over this engagement without a long ramp. As the relationship and our own portfolio grow, there is room to take on additional client assignments and to be trained on the development and for-sale sides of the business. Key Responsibilities Serve as the day-to-day owner's representative for the client-owned North Carolina asset and as the client's single point of contact at Red Cedar Homes. Own performance against the business plan and underwriting for the asset, including occupancy, rent growth, revenue, NOI, expense control, and debt service coverage. Lead the annual operating budget process for the asset and present it to the client owner for approval. Review monthly operating statements, variance reports, rent rolls, and delinquency reporting, with written commentary on drivers and corrective action. Manage capital expenditure planning and execution, including scope, bidding, budget, schedule, and completion. Track insurance, property tax, and other controllable and non-controllable expense exposure, and pursue appeals or repricing where warranted. Conduct regular site visits and maintain firsthand knowledge of physical condition, market position, and competitive set. Prepare hold, refinance, and disposition analyses for the client owner's consideration and present clear recommendations. Operate within the scope of the management or advisory agreement, and flag anything that requires client authorization before acting. Manage the relationship with the third-party property management company as the owner's representative, including the cadence of calls, reporting, and escalation. Hold property management accountable for leasing velocity, pricing execution, renewal performance, marketing, resident experience, collections, vendor management, and on-site staffing. Set measurable expectations and review performance against them on a defined schedule, with issues documented in writing. Review and approve property-level reporting, invoices, and expenditures within delegated authority, and route anything above that threshold to the client owner. Audit the management company's work in the field, not just on paper, including make-ready quality, unit turns, curb appeal, and preventive maintenance. Evaluate management company performance at least annually and make a recommendation on retention, restructuring, or replacement. Ensure compliance with the property management agreement, fair housing requirements, and applicable North Carolina landlord-tenant law. Prepare and deliver monthly and quarterly reporting to the client owner covering asset performance, variance to budget, leasing and occupancy trends, capital project status, key risks, and forward outlook. Produce clean, institutional-quality reporting packages that a sophisticated owner can read quickly and act on. Be the reliable, responsive point of contact for client questions, and bring a recommended course of action with every problem raised. Manage lender reporting and compliance for the asset, including covenant tracking, required deliverables, and lender communication. Continuously improve the format, clarity, and usefulness of the client reporting package. Work with Red Cedar Homes leadership on the client relationship, engagement scope, and any expansion of the assignment. Coordinate with the accounting function to reconcile asset performance against the books and pull the financial data needed for client reporting, keeping a clear line between accounting and asset management. Coordinate with construction and vendor resources on capital projects and scopes of work at the asset. Interface with legal counsel, lenders, insurance brokers, and consultants as needed to execute the business plan. Help document the process, templates, and reporting standards so this engagement becomes a repeatable service line for future third-party clients. Take on additional third-party asset management engagements as the service line expands. Extend the same discipline to Red Cedar Homes' owned portfolio, including subdivision developments, build-to-rent communities, and scattered-lot strategies. Support underwriting and financial review on new acquisition and development opportunities. Qualifications Required Direct multifamily asset management experience. This is non-negotiable. You should have managed multifamily assets at the asset management level, not just property management, for at least three years, and be ready to take over an engagement with a short ramp. Demonstrated experience managing a third-party property management company as the owner's representative. Bachelor's degree in finance, accounting, real estate, economics, or a related field. Proficiency building and auditing real estate financial models in Excel, including operating proformas, budgets, debt sizing, and hold/sell analyses. Experience producing institutional-quality ownership, investor, or lender reporting. Strong written and verbal communication skills, with the ability to translate financial detail into clear narrative for an owner who is not in the weeds day to day. Sound judgment about the line between recommending and deciding, and the discipline to stay inside the scope of a client engagement. Valid driver's license and willingness to travel regularly to North Carolina. Preferred Experience in a fee-based asset management, owner's representative, or fund advisory capacity serving outside capital. Exposure to value-add and lease-up multifamily in addition to stabilized assets. Familiarity with agency debt (Fannie Mae / Freddie Mac), HUD financing, construction lending, and preferred equity structures. Experience with AppFolio, Yardi, RealPage, or comparable property management systems. Knowledge of the North Carolina and Upstate South Carolina markets, particularly the Charlotte and Greenville-Spartanburg metros. Advanced degree (MBA, MSRE, or equivalent) or relevant designations (CFA, CCIM, CPM). What We Will Train You On We do not expect candidates to arrive with deep development or for-sale homebuilding experience. If you have strong multifamily asset management skills and you want to broaden your range, we will train you on the development side, the subdivision and build-to-rent side, and the for-sale residential side over time. Curiosity and willingness to learn matter here. Who You Are You take ownership. When something is off, you find it before the client has to ask, and you bring a recommended fix along with the problem. You can hold a vendor accountable without burning the relationship. You represent well. You understand that when you speak to this client, you are Red Cedar Homes. You are equally comfortable in a spreadsheet and walking a property. You are detail-oriented without losing sight of the big picture. You want to help build a service line, not just hold a seat. Compensation & Location Base Salary: $75,000 to $90,000 annually, depending on experience. Bonus: Performance-based bonus structure How To Apply Please submit a resume and a brief cover note describing your multifamily asset management experience, your experience overseeing a third-party property management company

Job Description HiFyve is hiring a CNC Cylindrical Grinding Operator / Machinist in the Manufacturing industry in Queens, NY! Pay: $20 – $35/hour (depending on experience) Shift: 2nd Shift (must train on 1st shift for several months) Location: Queens, NY Benefits: Full benefits package About the Role We’re looking for an experienced CNC Cylindrical Grinding Operator / Machinist to produce precision shafts, gear blanks, and assemblies for aerospace and defense applications. This hands-on role involves operating, setting up, and maintaining grinding equipment to achieve tight tolerances and exceptional surface finishes. Key Responsibilities • Operate cylindrical grinding machines to manufacture precision components, • Set up machines, dress wheels, and calibrate equipment to meet exacting tolerances, • Inspect finished parts using micrometers, gauge blocks, and other precision tools, • Maintain documentation of inspection results and address deviations promptly, • Perform routine maintenance, wheel changes, and coolant system checks, • Monitor machine performance, track hours, and support quality root-cause analysis, • Adhere to AS9100 quality standards and support continuous improvement initiatives, • Assist with production ramp-ups and schedule changes to meet critical deadlines Qualifications • Prior experience in cylindrical grinding, ideally in aerospace or hardened shaft applications, • Strong understanding of precision tolerances (± .0002”) and blueprint interpretation, • Willing to train on 1st shift and transition to 2nd shift; detail-oriented and quality-focused If you're interested, please apply!

Job Description Fairstead is a purpose-driven real estate firm dedicated to building affordable communities across the country. Headquartered in New York, with offices in Colorado, Florida, and Washington DC, Fairstead owns and manages a portfolio of more than 30,000 apartments, including pipeline, across 28 states. As an integrated owner, operator, and innovator, Fairstead brings development, construction, and property management under one unified platform to deliver high-quality affordable housing that serves our residents at scale. At Fairstead, we believe affordable housing should be thoughtfully designed, professionally managed, and responsibly operated. We seek to create and preserve housing that serves residents while delivering long-term value to communities, partners, and stakeholders. Fairstead challenges industry norms through our tech-forward, entrepreneurial approach to affordable housing. In addition to core real estate capabilities, we operate innovative service lines designed to improve resident outcomes, strengthen communities, and drive operational efficiency. We embrace digital transformation, data-driven decision-making, and emerging technologies, including AI, to build scalable systems that support sustainable growth, grounded in a culture of entrepreneurship, innovation, partnership, dedication, and integrity. Fairstead is seeking a Compliance Manager to join our on-site property management team. In this role, the Compliance Manager is responsible for maintaining compliance with the Housing Authority, executing effective annual administrative operating cycles, ensuring all requirements are completed, and liaising with the residents, housing authorities, and other stakeholders to maximize economic outcomes, and minimize operational risks. RESPONSIBILITIES: Portfolio & Certification Management • Manage compliance activities for an assigned portfolio of residential units within a designated geographic area., • Review and approve move-ins, initial certifications, interim recertifications, terminations, and move-outs within 48–72 hours., • Monitor and track recertifications to ensure timely completion and accuracy., • Review annual certifications and resolve discrepancies related to income, employment, or zero-income households., • Enter corrections, comments, and approvals in Yardi and RealPage (OneSite)., • Collaborate with Community Managers, Assistant Community Managers, and Recertification Specialists to resolve compliance issues. Audit & Reporting Oversight • Lead preparation for Management and Occupancy Reviews (MORs), LIHTC compliance audits (for blended sites), and investor audits., • Conduct bi-weekly meetings with site teams to review recertifications, discrepancies, and upcoming audits., • Partner with Accounting and HAP Specialists to resolve tenant ledger, rent, and voucher discrepancies., • Prepare and submit biweekly compliance workbooks, including outstanding recertifications and EIV discrepancies, to the Director of Compliance and site staff., • Participate in weekly compliance leadership meetings to review portfolio status, challenges, and upcoming audit requirements. Team Support & Communication • Create and manage Teams communication groups for assigned sites to provide ongoing support and real-time guidance., • Ensure site staff complete monthly and 90-day EIV reports and resolve discrepancies promptly., • Provide backup coverage when compliance team members are out., • Mentor and train site staff to ensure compliance with program regulations and audit readiness. Senior Compliance Manager Duties (as applicable) • Assist the Director of Compliance with monthly, quarterly, and annual reporting., • Supervise compliance staff and act as departmental lead when the Director is out of the office. Benefits: • Generous employer contribution for Medical Insurance through Meritain Health., • Employer Paid Vision Plans., • Company Matched 401(k) Retirement Plan: 100% of the first 3%; 50% of the next 2%., • 12 paid Holidays., • 15 days of PTO., • 7 Sick days., • Employer Paid Life Insurance., • Flexible Spending Account., • Nationwide Pet Insurance., • Disability Insurance., • Laser Correction Discount., • Employee Discounts on appliances, apparel, and more. QUALIFICATIONS: • Comprehensive knowledge of HUD Section 8, LIHTC, portable vouchers, and market-rate housing programs., • COS, Tax Credit, BOS, or equivalent compliance certifications preferred., • Proficiency in Yardi, RealPage (OneSite), and Microsoft Office Suite., • Strong organizational and time-management skills; ability to manage large, multi-state portfolios., • Professional, respectful, and collaborative demeanor with strong communication skills., • Ability to work independently, meet strict deadlines, and perform effectively under pressure., • Flexibility to work extended hours or weekends to meet priority deadlines., • Ability to travel to assigned sites as needed., • Coachable, mature, and solutions-oriented with the ability to partner effectively with leadership. Exact compensation may vary based on skills, experience, and location. Salary Range$80,000—$90,000 USD Diversity in backgrounds and experiences is key to Fairstead's success. Being an equal opportunity employer is a central tenet of our philosophy that shapes who we are and the communities we serve. Our goal is to ensure competitive total compensation that is commensurate with experience, location, and other market benchmarks. For information about how we use your personal information, including information submitted for career opportunities, please review our Privacy Policy at https://fairstead.com/privacy-policy/

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description This position is responsible for the safety, the productivity and the quality mindset of the shop floor employees. The position is responsible for assuring their designated team is achieving productivity goals, adhering to company initiatives and culture throughout the shop floor. In this role, a candidate should expect to spend a majority of their time on the shop floor with the shop floor employees. Coaching, mentoring, training and communication are key elements of this job. • Responsible for communicating to employees, providing a link between what they do and what the business needs, • Teach lean concepts and actively engage employees to improve speed, quality and reduce cost, • Participate and champion continuous improvement events, • Coach and guide employees about proper conduct and behaviors in line with company culture, • Provide feedback and maintain documentation regarding employee behaviors (good & bad), • Ensure cell employees adhere to company policies (e.g. following operating instructions, safety protocols, etc.), • Establish and enforce policies (manufacturing, quality, safety), • Responsible for employee time and attendance, • Audit overtime usage and seek improvements to reduce as necessary, • Optimize resource allocations – manpower & equipment, • Establish and sustain a 5S culture, • Assure employees have adequate training to achieve quality and productivity requirements, • Team building, • Use problem solving and critical thinking skills to overcome manufacturing obstacles, • Encourage problem solving at the operator level, • Lead and participate in Gemba walks, • Investigate safety, quality or productivity issues, • Create and assure that KPI’s are being tracked and improvements are sought, • Manage and communicate resource exceptions (time off / coverage), • Produce parts to meet master production schedule requirements – takt time, • Responsible to expedite jobs outside of cell/shared resources, • Provide timely commitments on WIP and ensure that all commit dates are on track and met., • Responsible for WIP quantities and accuracy. Qualifications College helpful but not required Supervisor experience required MS Office, ERP systems helpful Additional Information • Leadership skills:, • Strong communication with subordinates, peers and management., • Ability to motivate others, • Ability to train and delegate other, • Effectively provide feedback to reports and peers, • Be accountable for the performance of the team’s metrics and its members’ behaviors, • Mathematical skills; calculating figures, formulas, • Organize, plan and prioritize work in a fast paced, dynamic environment, • Critical thinking, decision making, problem solving – analyze information and choose best solution, • Information gathering, • Monitoring and reviewing available data (i.e. production performance or quality data) to detect and assess problems, • Lean or six sigma training or experience, • Ability to seek out opportunities independently and offer solutions, • Must be comfortable in a manufacturing environment, • Must be able to work in an office environment, i.e., sitting for long periods of time; extensive computer work (typing), • May be required to lift up to 50 lbs., • May require some travel; i.e., car, train, plane We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Reports To: Client Services Supervisor, Client Services Manager, or equivalent leadership Typical Work Schedule: Monday–Friday | 9:00AM - 6:00PM Power the Transition from Paper to Digital If you enjoy structured work, repetitive tasks, and working behind the scenes to keep operations moving, this role is for you. As a Document Scanning Operator, you'll support document preparation, scanning, indexing, and records management activities while helping preserve important business records. This role also serves as a cross-trained team member, providing reception/concierge coverage and light facilities support as operational needs require. Why This Role Matters Your work ensures physical records are accurately converted into organized digital files that support business continuity and accessibility. What You'll DoMail & Document Operations • Receive, sort, and track incoming mail and packages using chain-of-custody systems, • Process outgoing mail and shipments, • Notify employees of deliveries and respond to mail and package inquiries, • Distribute mail, packages, and office materials to company personnelBusiness Service Center & Equipment Support, • Operate and maintain multifunction devices (MFDs), including replenishing toner and paper, • Support copy/print requests and submit service tickets when needed, • Maintain an organized and professional Business Service CenterOffice & Hospitality Support, • Monitor, replenish, and order office supplies, • Restock pantry, kitchen, conference, and meeting areas, • Assist with meeting room setups and office moves, • Perform light maintenance and cleaning duties as neededClient Service & Cross-Functional Support, • Deliver exceptional customer service and build positive relationships with employees and internal teams, • Handle sensitive matters with professionalism and discretion, • Provide reception or concierge coverage as needed, • Cross train backup personnel on procedures and support additional operational needs during downtimeWhat You Bring, • Strong attention to detail and accuracy, • Ability to perform repetitive work in a fast-paced environment, • Strong organizational and time management skills, • Basic computer proficiency, including Microsoft Office, • Ability to work independently and adapt to changing priorities, • Experience with document imaging, records management, or shipping/receiving is a plusQualifications, • High School Diploma or equivalent required, • 1+ years of related experience preferred, • Ability to learn document management systems and site procedures, • Must follow onsite security policies, including restrictions on phones and imaging devices on active work floorsPhysical Requirements, • Ability to lift and move boxes/packages up to 40–60 lbs. using appropriate equipment, • Ability to stand, walk, bend, kneel, and sit for extended periods, • Manual dexterity required for operating scanners and office equipment Travel: None or Negligible Other Duties: Responsibilities may change based on operational needs. Compensation: The expected compensation is an estimate, and the final offer will depend on skills, experience, location, and other job-related factors. Vacancy Status: This posting is for an existing vacancy. Pay Range$22—$23 USD WHAT WE OFFER • Career Growth: An opportunity to enter a job that allows you to learn new skills or use a variety of them that may lead you to uncover other career opportunities., • Learning & Development: At SPS, we promote a work culture of learning so that you can develop to be the best at what you do., • We Recognize Talent: We offer a variety of recognition programs for all levels of employees., • Paid Time Off: Full time: Minimum of 80 hours/calendar year. Part time/temporary: Minimum of 1 hour for every 30 hours worked. PTO amounts may increase based on tenure and/or the assigned account. PTO allows employees to take approved time off for any reason., • Bonuses: Are available for employee and client referrals for current employees., • Benefit Offerings: Medical, Dental, Vision, HCFSA, DCFSA, HSA, Commuter Transit and Parking Pre-Tax Plans, Supplemental Life Insurance, Accident Insurance, Critical Illness, Hospital Indemnity, Legal Program, Identify Theft Protection, Pet Discounts, Pet Insurance, Group Home and Auto Insurance, EAP, Short Term Disability, Life Insurance, Education Discounts, 401k w/ matching, and Entertainment Discounts., • Note: Please inquire with the Human Resources team for benefit offerings per role as regular positions that routinely are under 30 hours/week may have a different benefit offering. About SPS SPS is a global workplace solutions and business transformation company operating in more than 20 countries. Across North America, we help clients enhance workplace experiences and business operations through services including workplace support, physical and digital mailroom solutions, intelligent document processing, reception and concierge services, and other business support offerings. Our clients include leading organizations across banking, insurance, legal, higher education, professional services, and many Fortune 500 companies. At SPS we embrace the uniqueness of our employees and are committed to the fair and equal treatment of all people, applicants, and employees by promoting a culture of access, inclusion, equity and diversity. SPS provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual and reproductive health choices, national origin, age, disability, genetics, military status, gender identity or expression, sexual orientation and/or any other status protected by applicable law. Colorado only: We accept applications for an expected minimum of 5 days from the date it is posted. The posting may remain open longer as needed to ensure a robust and inclusive applicant pool. To ensure a fair and authentic interview process, applicants may not use AI tools or any other form of real-time assistance during interviews. SPS team members may use transcription or note-taking technology solely to support accurate interview documentation. No AI or automated decision-making tools are used to screen, assess, or select candidates for this role. SPS uses the Greenhouse Applicant Tracking System to facilitate application management and recruiting workflows. Human recruiters and hiring managers review applications and exercise independent judgment throughout the hiring process SPS offers reasonable accommodations in the hiring and employment process for individuals with disabilities. If you need assistance in the application or hiring process to accommodate a disability, you may request an accommodation at any time. To view our privacy policy, click on the link below: Data Privacy Statement Acknowledgement Section: By submitting an application, by hitting "Submit Application", you certify that the information contained in this application is true and complete. You attest to the fact that the answers provided are correct to the best of your knowledge and ability. You certify that you have not knowingly withheld any information that might affect your chances for hiring. You understand that any false information or omission (including any misstatement) on this application or on any document used to secure this employment can be grounds for rejection of application or, if you are employed by SPS can be grounds for immediate termination from this company.

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees in our climate-controlled plants. Summary: The Grand Format Operator I is responsible for the set-up, adjustment, and safe operation of all relevant equipment to produce quality finished products that meet customer specifications and are completed in accordance with company policies and procedures. Schedule: 2nd shift and 3rd shift. Monday - Friday, eight or more hours per day, five days per week based on business needs. Primary schedule will be, 2:00 PM- 10:00 PM, 10:00PM - 6:00AM or similar. Training may occur at other times. Salary Range: $16.00 To 19.00 Hourly Compensation commensurate with experience. At time, we are not engaging with agencies or third-party recruiters. Thank you for understanding. DUTIES AND RESPONSIBILITIES • Access Batching System to view schedule and identify priority jobs to be completed, • Perform routine maintenance and cleaning on large format printers to ensure optimal performance and reduce the risk of mechanical issues., • Identify and help resolve equipment or production issues by assisting with basic troubleshooting, minimizing downtime and ensuring consistent output quality., • Review job orders to determine print specifications such as quantity, stock type, ink colors, and special instructions, ensuring all production parameters are followed accurately., • Complete and maintain required documentation, including production logs, maintenance records, quality checklists, and job order forms in accordance with operational procedures., • Actively remove waste items for recycling, • Complete and process all required paperwork, records, documents, etc., • Regularly perform general housekeeping duties in your work area(s), • Adhere to all safety policies and protocols and maintain a safe working environment, • Assist in cultivating an interdependent safety culture by reporting workplace hazards, related injuries, illnesses and or/near misses to management immediately, • Attend all department/company meetings, • Wear all assigned Personal Protective Equipment (PPE) when required, • Other duties as assigned For an extensive list of responsibilities, duties and physical demands/work environment please refer to the attached Job Description. EXPERIENCE AND QUALIFICATIONS EDUCATION, LICENSES, CERTIFICATIONS, EXPERIENCES: • High School Diploma or GED equivalency, preferred, • One to two years related experience in a manufacturing environment and/or training, • Experience in a wide or large format production environment CRITICAL KNOWLEDGE, SKILLS, AND ABILITIES REQUIREMENTS: • Problem-Solving and Adaptability: Strong problem-solving skills when faced with unexpected challenges, such as machine malfunctions, material shortages, or errors in print quality. Ability to adapt to new printing technologies or changes in production schedules, ensuring smooth operations despite changes., • Time Management & Efficiency: Ability to manage multiple print jobs simultaneously, ensuring deadlines are met without sacrificing quality. Organizing workflows, preparing materials in advance, and optimizing print runs for efficiency and cost-effectiveness., • Attention to Detail: Precision in monitoring print jobs to ensure all details, such as color accuracy, image sharpness, and print placement, meet the required standards. Detecting small defects or inconsistencies during production and taking corrective action immediately., • Communication Skills: Ability to read and understand corporate policies, job-related documents, and written/verbal instructions in English to ensure effective and compliant job performance., • Strong foundational math skills, with the ability to perform basic operations including addition, subtraction, multiplication, and division., • Highly detail-oriented, organized, and efficient in managing time, with a proven ability to meet deadlines and complete tasks accurately. 4OVER COMPANY HISTORY 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- • Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care, • 4over pays 100% of the employee’s premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000, • Coverage will be effective on the 1st of the month following 1 month of continuous regular full-time employment 401(k) Retirement Plan • New employees are eligible to enroll the first of the month, following 1 month of employment, • Semi-annual open enrollment (January 1st and July 1st), • Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation, • Immediate Vesting Holidays and PTO • 9 Paid Holidays, • Accumulating PTO to be used after 90-days of continuous and active full-time service 4over is an Equal Opportunity employer. It provides equal employment opportunities to all employees and applicants for employment without regard to race, color, sex, national origin, age, religion, disability, or any other legally protected status and takes affirmative action to recruit, employ, train, and promote qualified minorities, women, covered veterans, and individuals with disabilities.

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. We take pride in fostering a safe environment for all employees. Summary: The Press Operator is responsible for the setup, efficient operation, maintenance, and troubleshooting of the Komori sheet-fed press, ensuring high-quality, high-volume, and on-time production while supervising and supporting the feeder. Schedule: [1st, 2nd or 3rd shift], Monday-Friday, eight or more hours per day, five days per week based on business needs. Primary schedule will be [1:00 PM – 9:00 PM, etc.], or similar. Training may occur at other times. Salary Range: $25-$29/hourly Compensation commensurate with experience. At this time, we are not engaging with agencies or third-party recruiters. Thank you for your understanding. DUTIES AND RESPONSIBILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The listed requirements are representative of knowledge, skillset, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Specific duties may vary to meet the needs of the company. Include the following: • Set up, configure, and operate the sheet feed press to produce high quality print products, • Access the Batching System to view press schedule and identify priority jobs to be completed, • Examine job orders to determine the quantity to be printed, stock specifications, color(s) and special printing instructions, • Lead and direct assistant operator, including on the job training and mentor junior colleagues, • Ensure Press Crew prepares Press Machine for the next job once current job is complete, • Monitor Press Cycle and performance, ensuring optimum press performance and job quantity reporting along, with defect and quality checks, • Maintain and troubleshoot machine making basic repairs as needed according to schedule, • Actively remove waste items for recycling, • Complete and process all required paperwork, records, documents, etc., • Regularly perform general housekeeping duties in your work area(s), • Adhere to all safety policies and protocols and maintain a safe working environment, • Assist in cultivating an interdependent safety culture by reporting workplace hazards, related injuries, illnesses and or/near misses to management immediately, • Attend all department/company meetings, • Wear all assigned Personal Protective Equipment (PPE) when required, • Other duties as assigned. For an extensive list of responsibilities, duties and physical demands/work environment please refer to the attached Job Description. EDUCATION, LICENSES, CERTIFICATIONS, EXPERIENCES: • Three (3) – five (5) years’ experience as a Komori Sheet Fed Press Operator, • Proven mechanical aptitude and experience performing Sheet Fed Press maintenance and minor repairs. CRITICAL KNOWLEDGE, SKILLS, AND ABILITIES REQUIREMENTS: • Problem-Solving and Adaptability: Strong problem-solving skills when faced with unexpected challenges, such as machine malfunctions, material shortages, or errors in print quality. Ability to adapt to new printing technologies or changes in production schedules, ensuring smooth operations despite changes., • Time Management & Efficiency: Ability to manage multiple print jobs simultaneously, ensuring deadlines are met without sacrificing quality. Organizing workflows, preparing materials in advance, and optimizing print runs for efficiency and cost-effectiveness., • Attention to Detail: Precision in monitoring print jobs to ensure all details, such as color accuracy, image sharpness, and print placement, meet the required standards. Detecting small defects or inconsistencies during production and taking corrective action immediately., • Communication Skills: Ability to read and understand corporate policies, job-related documents, and written/verbal instructions in English to ensure effective and compliant job performance., • Strong foundational math skills, with the ability to perform basic operations including addition, subtraction, multiplication, and division., • Highly detail-oriented, organized, and efficient in managing time, with a proven ability to meet deadlines and complete tasks accurately. 4over Company History: 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- • Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care, • 4over pays 100% of the employee’s premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000, • Coverage will be effective on the 1st of the month following 1 month of continuous regular fulltime employment 401(k) Retirement Plan • New employees are eligible to enroll the first of the month, following 1 month of employment, • Semi-annual open enrollment (January 1st and July 1st), • Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation, • Immediate Vesting Holidays and PTO • 9 Paid Holidays • Accumulating PTO to be used after 90-days of continuous and active full-time service 4over is an Equal Opportunity employer. It provides equal employment opportunities to all employees and applicants for employment without regard to race, color, sex, national origin, age, religion, disability, or any other legally protected status and takes affirmative action to recruit, employ, train, and promote qualified minorities, women, covered veterans, and individuals with disabilities.

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. We take pride in fostering a safe environment for all employees. Summary: The Digital Imaging Operator I is responsible for producing variable and static digital printed pieces on the Xerox iGen, HP Indigo, Autobond, UV lighting and Scodix Digital Press. Schedule: Monday -Friday, eight or more hours per day, five days per week based on business needs. Primare schedule will be (2:00 PM - 10:00PM). Training may occur at other times. Salary Range: $26.62 - $28.00 Hourly Compensation commensurate with experience. At this time, we are not engaging with agencies or third-party recruiters. Thank you for your understanding. Essential Duties and Responsibilities include the following: • Login to batching system to view customer job assignments due dates and identify priorities, • Examine job orders to determine details such as: quantities to be printed, production run times, stock specifications, colors and color sequences, • Setup assigned apparatus to specifications and run product, • Monitor machines, adjusting speed, temperature, ink flow and positions of products to ensure machine is maintaining the proper specifications, • Inspect and examine printed products for: print clarity, color accuracy, conformance to specifications and external defects, • Troubleshoot apparatus problems, resolve if possible, notify Supervisor/ Plant manager, • Maintain proper machine maintenance and lubrication, • Ensure all equipment, tools, and workstation are in good working order and is free of safety hazards, • Report any and all workplace hazards to management immediately, • Wear all assigned Personal Protective Equipment (PPE) when required, • Report all work related injuries, illnesses, and/or near misses to management immediately, • Follow and comply with all safety and work rules and regulations, • Provide thorough training to employees including but not limited to new hires, transfers, and newly promoted employees as needed, • Other responsibilities and tasks may be assigned, • Complete and maintain all required paperwork, records, documents, etc., • Regularly perform general housekeeping duties in your and surrounding work area(s), • Adhere to all safety policies and protocols and maintain a safe working environment, • Attend all department/company meetings, • Other duties as assigned. For an extensive list of responsibilities, duties and physical demands/work environment please refer to the attached Job Description. EXPERIENCE AND QUALIFICATIONS EDUCATION, LICENSES, CERTIFICATIONS, EXPERIENCES: • Xerox iGen Operator certified, • Six months – one (1) year of experience operating and troubleshooting an HP Indigo machine, • Proficient computer knowledge CRITICAL KNOWLEDGE, SKILLS, AND ABILITIES REQUIREMENTS: • Problem-Solving and Adaptability: Strong problem-solving skills when faced with unexpected challenges, such as machine malfunctions, material shortages, or errors in print quality. Ability to adapt to new printing technologies or changes in production schedules, ensuring smooth operations despite changes., • Time Management & Efficiency: Ability to manage multiple print jobs simultaneously, ensuring deadlines are met without sacrificing quality. Organizing workflows, preparing materials in advance, and optimizing print runs for efficiency and cost-effectiveness., • Attention to Detail: Precision in monitoring print jobs to ensure all details, such as color accuracy, image sharpness, and print placement, meet the required standards. Detecting small defects or inconsistencies during production and taking corrective action immediately., • Communication Skills: Ability to read and understand corporate policies, job-related documents, and written/verbal instructions in English to ensure effective and compliant job performance., • Strong foundational math skills, with the ability to perform basic operations including addition, subtraction, multiplication, and division., • Highly detail-oriented, organized, and efficient in managing time, with a proven ability to meet deadlines and complete tasks accurately. 4OVER COMPANY HISTORY 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- • Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care, • 4over pays 100% of the employee’s premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000, • Coverage will be effective on the 1st of the month following 1 month of continuous regular full-time employment 401(k) Retirement Plan • New employees are eligible to enroll the first of the month, following 1 month of employment, • Semi-annual open enrollment (January 1st and July 1st), • Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation, • Immediate Vesting Holidays and PTO • 9 Paid Holidays, • Accumulating PTO to be used after 90-days of continuous and active full-time service 4over is an Equal Opportunity employer. It provides equal employment opportunities to all employees and applicants for employment without regard to race, color, sex, national origin, age, religion, disability, or any other legally protected status and takes affirmative action to recruit, employ, train, and promote qualified minorities, women, covered veterans, and individuals with disabilities.

Job DescriptionBenefits: • Health insurance, • Opportunity for advancement, • Paid time off, • Vision insurance, • 401(k), • Dental insurance JOB DESCRIPTION Title: CNC Machine Operator 1 Reports To: Mold & Machine Shop Foreman Position Summary: The CNC Machine Operator 1 is responsible for the operation of the CNC equipment including lathes and mills. The job involves repetitive tasks, and employees may be required to monitor multiple machines.. Typical job duties include, loading materials into the machine, monitoring machine operation during use, machine maintenance, deburring, and inspecting machined parts. This role will also require simple maintenance tasks such as changing coolant and oil. An individual in this role is expected to be cross-trained to operate multiple machining centers and/or to perform functions in other departments as required. Essential Functions: • Basic understanding of CNC machining, including setup procedure, operation, and quality requirements., • Basic understanding of reading and interpreting manufacturing drawings and production documentation., • Math competency required. Ability to simple-perform calculations required for machine setup and adjustments to maintain required dimensions., • Basic understanding of measurement equipment including calipers, micrometers, and other instruments needed to conduct inspection of work product., • Understand and follow all Company and OSHA safety procedures., • Maintain a well-organized, safe and clean work area at all times., • Conduct and document preventative maintenance on the machines., • Maintain standards of quality during production., • Able to stand for more than 4 hours at a time., • Work a minimum of 40 hours per week and overtime as assigned., • Follow all safety guidelines as outlined in the company safety manual., • Cross-train and perform other duties as assigned based on organizational demand. Skills/Qualifications: • High School diploma or GED required, • CNC machining and/or manufacturing industry experience preferred., • Experience with Haas, Doosan, and Fadal controls is a plus, • Proficiency with the Microsoft Office Suite is a plus, • Impeccable attention to detail, • An analytical mind with good math skills, • Great communication and interpersonal abilities, • Must be reliable and trustworthy, • Able to lift 50 lbs. or more, • Able to stand for more than 4 hours at a time, • Collaborate with warehouse employees and other staff to ensure business goals are met

Job Description About us Encord is the universal data layer for AI that helps 300+ AI teams train and run models on the right data. Our platform indexes, curates, annotates, and evaluates data across the full AI lifecycle, from development through production. Trusted by Woven by Toyota, AXA, UiPath, Zipline, and more. We're an ambitious team of 100+ working at the frontier of AI and have raised $60M in Series C funding from Wellington Management, CRV, Next47 and Y Combinator. The role As a Human Data Operations Strategist, you will play a critical role in managing and optimising data annotation and machine learning workflows for our clients. You will work closely with cross-functional teams, including clients, annotation specialists, and machine learning engineers, to ensure high-quality data is available for AI models. What you'll do Oversee data annotation projects, translating complex AI and machine learning requirements into clear workflows and instructions for data annotation teams Ensure the highest standards of data quality by designing and refining annotation processes, auditing results, and implementing feedback loops Act as a trusted advisor to clients, helping them design and implement the best data annotation workflow for their human annotation process Provide guidance and feedback to the annotation team, ensuring team members are equipped with the context and skills needed to perform high-quality work aligned with project requirements and best practices Work closely with product and engineering teams to drive improvements in AI training data processes, tools, and methodologies Who we're looking for A sharp, execution-oriented operator with a consulting or AI company pedigree — you bring structured thinking, strong project management instincts, and a bias for getting things done Analytically rigorous and comfortable with ambiguity — you break down complex operational challenges from first principles and build clear, actionable plans to solve them Technically fluent enough to get hands-on with data — whether that's querying a database, auditing annotation outputs, or automating a workflow in Python Passionate about AI and machine learning, with genuine curiosity about how data quality and operations underpin model performance A natural communicator who can translate fluidly between ML engineers and non-technical clients, keeping complex multi-stakeholder projects on track Entrepreneurial and collaborative — you thrive in fast-paced environments and take ownership without waiting to be told what to do Experience requirements 3–7 years of professional experience, with a strong preference for backgrounds in top-tier strategy consulting and/or operations or data roles at leading AI or technology companies Proven ability to own complex, multi-stakeholder workflows end-to-end — from scoping and planning through execution, quality assurance, and iteration Working proficiency in Python or SQL, with the ability to query data, automate workflows, or audit annotation outputs; broader familiarity with relational databases or data annotation tooling equally valued Experience designing or optimising data operations processes with a strong eye for quality, consistency, and scalability — ideally in a context involving human-in-the-loop workflows or structured labelling tasks Demonstrated ability to engage effectively with both technical stakeholders (ML engineers, data scientists) and non-technical clients, translating requirements clearly in both directions Bonus: hands-on experience with computer vision, generative AI, or multimodal data workflows; prior exposure to data annotation platforms or quality management frameworks; experience coaching or managing operational teams Why Encord Competitive salary, commission, and meaningful equity in a high-growth start-up Clear, accelerated growth opportunities as the company scales rapidly Strong in-person culture: 4 days/week Flexible PTO to fully recharge Annual learning & development budget Comprehensive health, dental, and vision coverage Frequent travel opportunities across the U.S., London, and Europe Bi-annual company offsites, twice-weekly team lunches, and monthly socials

Job Description HiFyve is hiring a CNC Lathe Operator / Machinist in the Manufacturing industry in Queens, NY! Pay: $20 – $35/hour (depending on experience) Shift: 2nd Shift (must train on 1st shift for several months) Location: Queens, NY Benefits: Full benefits package About the Role We’re seeking an experienced CNC Lathe Operator / Machinist to produce high-precision parts for aerospace and defense applications. This hands-on role requires strong attention to detail, blueprint reading skills, and the ability to work within tight tolerances in a fast-paced environment. Key Responsibilities • Set up, operate, and monitor CNC lathes to machine precision components from steel and specialty alloys, • Read and interpret blueprints, machining print tolerances, and production specifications, • Adjust tooling and programs as needed; inspect finished parts using micrometers, calipers, and gauges, • Troubleshoot machine issues (tool wear, chatter, axis drift) and perform minor preventive maintenance, • Maintain production logs, monitor scrap rates, and communicate equipment issues to maintenance, • Follow all ISO 9001/AS9100 quality and safety standards, • Collaborate with quality and engineering teams to support process improvements Qualifications • 2–3+ years of CNC lathe operating experience (preferably in aerospace or precision manufacturing), • Skilled in hard turning and maintaining tight tolerances, • Strong blueprint reading and precision measurement abilities, • Willing to train on 1st shift and transition to 2nd shift; able to work overtime as needed If you're interested, please apply!

Job DescriptionQC Position Duties: • Perform testing of plated product:, • XRF measurement of plating thickness., • Location of selective plating., • Solderability., • Dimensional, or mechanical measurements – for example – progression, camber, coil set, part width and thickness., • Visual examination of parts under a microscope., • Working safely with a variety of chemicals., • Other testing as specified., • Recording of results:, • Hard copy forms., • Electronic forms., • Assisting with Production needs:, • The workload in Quality Control is highly variable, depending upon the number of plating lines running and the product mix. It can be the case that staffing in QC exceeds what is needed to perform required quality testing. In those cases, the Quality Control Technician may be asked to assist Production. This can include items such as:, • Assisting with changeover., • Cleanup., • Assisting with preventive maintenance functions., • Acting as the second operator on products requiring more than one operator., • Helping with splices., • Other tasks as identified by the Production Manager or the Production Supervisor., • On the night shift, specifically, the Production Supervisor is authorized to assign Quality Control personnel to Production functions, at his or her discretion., • Record analytical results as required:, • Paper records., • Excel spreadsheets., • Maintain organized files of test results. Skills/Requirements: • This position requires basic math skills (add, subtract, multiply, divide)., • Basic Microsoft Excel knowledge is helpful., • Requires the ability to work a 12-hour shift. 6:00pm-6:00am, Train on days but it will be a night shift hours after training.

Job Description Fire Alarm Technician Apprentice About the Company Allstate Sprinkler LLC is a leading provider of fire protection services in the greater New York City market headquartered in the Bronx, NY. As a member of Guardian Fire Protection Services, one of the fastest-growing fire, life safety, and security platforms in the United States, Allstate combines local market expertise with the resources and scale of a regional leader. Guardian operates across multiple states with 700+ team members and more than 24 office locations and is committed to delivering exceptional customer experiences, technical excellence, and a culture people are proud to join. This is an opportunity for an experienced operator and business leader to lead one of the most active and strategically important fire protection operations in the country. About the Opportunity AllState Sprinkler is currently hiring Apprentice for the Fire Alarm division. This is a great opportunity to learn a growing and in demand trade. We will train you to become a licensed, certified Fire Alarm Technician. We are looking for hard working and hands-on individuals that want to learn a new trade in the fire protection industry. The fire protection industry is in high demand and it can be a long term career that with training, certification and years of quality hard work. Compensation • This is an Hourly position and the pay rate is contingent experience and background. It will be discussed during the interview process., • Potential Quarterly Bonuses Qualifications • A valid driver's license with 3 or less points is required., • Three years of licensed driving experience is required., • Experience using a variety of hand tools., • Willing to work varied hours, nights, early morning and weekend shift when needed., • Capable and willing to learn and study about the different alarm systems in order to pass tests and become certified., • Must be comfortable working on ladders 6 to 12ft and on lifts., • Ability to lift up to 70lbs, • Ability to work overhead and in unusual or small spaces such as attics and crawl spaces, • Skills to communicate well with customers and explain the work being done and any repairs that are necessary., • Skills to write well and be very detailed in your write up on service work., • Must be well organized and be able to keep track of service tickets and process all required documents for each service performed. Benefits • 401K with a company match, • Medical, Dental and Vision Insurance, • Company paid Short Term Disability, • Company paid Long Term Disability, • Company paid Life and AD&D insurance, • Pre-tax accounts for health and dependent care, • Aflac, • Vacation and Personal time, • Paid holidays, • Tuition Reimbursement *AllState Sprinkler, LLC is an Equal Employment Opportunity (EEO) employer and prohibits employment discrimination for employees and applicants based on his or her age, race, color, pregnancy, gender, gender identity, sexual orientation, national origin, religion, marital status, citizenship, or because he or she is an individual with a disability, protected veteran or other status protected by federal, state, and local laws. Job Type: Full-time This link leads to the machine-readable files that are made available in response to the federal Transparency in Coverage Rule and includes negotiated service rates and out-of-network allowed amounts between health plans and healthcare providers. The machine readable files are formatted to allow researchers, regulators, and application developers to more easily access and analyze data. #AllStateSprinkler #FireProtection #FireAlarms #Apprenticeship #Hiring #BronxNY #NYCJobs

Job Description A large real estate investment and management firm is seeking an Accounting Manager to join their team and supervise the day-to-day accounting, treasury, and operational tasks for an assigned portfolio of real estate investments. This is a hands-on roll with exposure to all aspects of the business and potential for significant growth. DUTIES AND RESPONSIBILITIES: • Train, supervise and review the work of internal and outsourced Accounting close functions • Conduct performance evaluations, set goals, and provide coaching and mentoring to team members • Continuously assess accounting processes and procedures, identifying areas for improvement and implementing streamlined workflows • Participate in monthly draw process, • Participate in coordination and completion of annual audits, • Participate in preparation of property budgets and projections, • Interact with internal management, internal investment team, internal property managers, banking institutions, investors, lenders, JV partners, external tax and legal advisors, and auditors as necessary • Participate in deal closings including acquisitions, dispositions, and financing transactions, • Ad hoc projects as requested QUALIFICATIONS: • Bachelor's Degree in Accounting, CPA designation preferred, • 3+ years of Real estate investment accounting/operations experience at an owner/operator/lender or third-party administrator • Strong leadership abilities and a proven track record in team management, • Ability to foster a collaborative and high-performing team environment, • Motivated and dependable team player with impeccable ethics who maintains strict confidentiality • Excellent written and oral communication skills, • Sound business acumen and decision-making skills with an aptitude for identifying when issues need escalation to senior management • Ability to meet deadlines in a fast-paced environment, • Proficiency in Microsoft Office Suite, • Proficiency with RealPage software is a big plus but not required #AIONhire

Job DescriptionDescription New York, USA, with intra-USA and global travel On Target First-Year Earnings: $240,000 ($120,000 base + $120k bonus with uncapped upside - example stretch case: $360,000) Meaningful equity High autonomy on where you spend your time, with time in office for alignment and planning International and intra-US relocation packages available About Aurora Aurora is the AI-native Lifestyle Operating System for the world's highest performers. A proactive, conversational lifestyle management product relied on by the world's top founders, athletes, and creatives to advise, execute, and manage their travel, dining, wellness, experiences, and gifting globally. Over half our members use every single day, 95% every week, and in our first 6 months, member spend & engagement is outperforming industry benchmarks by 5×. Aurora is backed and chaired by Alex Macdonald, the most successful founder in this category, and has raised $9M from experienced operators and tier-1 investors. We are now expanding the founding engineering team as we scale the product and the member base. Aurora is built in person from our offices in London, New York, and Los Angeles. The engineering team works from our London office in Belgravia, with flexible remote days. You can find our recent launch video here. Membership Director Our early team is searching for a full-time Membership Director to own our member relations from the first point of contact to renewal. You will work directly with the CEO and COO to design, organize, and own a high-performance business development and account management function. This role reports directly to Aurora's CEO, and has the potential to rapidly grow into a senior leadership position across Growth and Business Development. This is an opportunity to play a central role in building and growing the world's highest-impact business development function, building an unparalleled network amongst world-class founders, athletes, creatives, and family offices - developing an ultra-high-performance, thriving member base that relies on Aurora on a daily basis. The role includes direct business development, partnerships, community events and activations, and member relations from first interaction to renewal. Our Principles We’re a deeply committed team of tier-1 backed and exited operators united by our five core principles: • We seek truth, • We are high-leverage, • We are owners, • We believe impossible is an attitude Why AuroraHigh Leverage Design a daily-use product placed directly in the hands of the world’s most ambitious individuals and organizations - empowering them to compound their time, relationships, and global impact. Cutting-Edge AI Work hands-on with a next-generation AI system redefining lifestyle management at the highest level, spanning context, recommendation, orchestration, and execution. Design an ultra-lightweight, ultra-high-leverage product experience that consistently wins the engagement, trust, and spend of the most powerful consumer cohort in history. Opportunity Play a foundational role in building the future of high-performance lifestyle management - a $100bn opportunity at the intersection of technology, luxury, and longevity. About the Founders Aurora was founded in 2024 by: • Jonah Lowenstein, previously founder of a social e-commerce platform backed by Accel, 20VC, and the co-founder of Venmo, • Aurelius Zwick, won the UK’s largest youth entrepreneurship competition at age 16, • Dmitry Ogurtsov, previously director of engineering at conversational AI company exited to ZoomInfo Aurora is chaired by Alex Macdonald, founder of the world’s most successful concierge - exited to Capital One for $300m. To date, we’ve raised $9M from Tier-1 VCs and operators, including the founder of Cleo, Quadpay, early investors in Supercell and Deliveroo, the President of VistaJet, and tier-1 athletes including Kevin Love and Kyle Kuzma. Requirements Key Responsibilities: • Own Aurora’s member business development funnel Actively source and convert new members through your network. Translate high-signal engagement with Aurora into conversions and renewals., • Represent Aurora directly with members Engage with prospects and members personally during their first interactions around the product, supporting their conversion journey, and identifying opportunities to improve the funnel while ensuring each conversion experience reflects Aurora’s standards., • Develop and manage channel partnerships Build and maintain relationships with aligned partners, communities, and networks that introduce high-quality prospective members to Aurora., • Create high-signal events and collaborations Design and execute proprietary events and cultural collaborations in high-signal communities and venues to attract and engage prospective members., • Build the long-term playbook and team Create the playbook for a world-class member relations function, then hire, train, and lead a high-performance onboarding, conversion, and retention team. Who You Are: • Connected and capable You ideally have a deep familiarity with and existing relationships within elite networks, founder communities, athlete and creative circles, family offices, or similar high-signal ecosystems. You are well connected in at least one of New York, Miami, or Los Angeles., • A master relationship builder and persuader You excel at identifying, building, and nurturing relationships in high-performance networks, turning introductions or chance encounters into meaningful, trusting, long-term relationships., • A rigorous operator You can manage multiple partnerships, events, and communication streams without losing attention to detail, prioritizing the highest-leverage opportunities., • Data-driven and high leverage You can use metrics such as lead volume, engagement patterns, conversion rates, and member behaviors to identify areas of improvement and continuously improve performance., • An outright owner You operate autonomously, identify what needs to happen, and drive outcomes without waiting for direction. You bring solutions, iterate quickly, and communicate confidently under scrutiny. Benefits • Competitive salary + performance-based bonus., • Founding stock options package on the ground floor of a $10b+ opportunity., • Access to exclusive Aurora events and services., • Whoop or Oura Ring on us., • $2,000 annual education budget., • Whatever tech you need to do your best work., • Generous parental leave., • Comprehensive health benefits, with 90% coverage including dental and vision.

Job Description General Description: The Viñas Lead is responsible for leading the daily operations of the Viñas production line by ensuring products are produced safely, efficiently, and according to company quality standards. This position provides leadership, training, and support to production employees while promoting a culture of safety, teamwork, accountability, and continuous improvement. General Description & REQUIREMENTS · Lead and coordinate the daily activities of the Viñas production team. · Assign workstations and daily responsibilities to employees. · Train all new and existing employees on production procedures, food safety, quality standards, equipment operation, and company policies. · Monitor employee performance and provide ongoing coaching, feedback, and retraining when needed to ensure consistency and compliance. · Verify that employees are following Standard Operating Procedures (SOPs) and best practices at all times. · Cross-train team members to ensure operational flexibility and adequate coverage across the department. · Work closely with Supervisors and Managers to meet daily production goals. · Help schedule labor efficiently while minimizing overtime. · Provide clear direction, coaching, and support to team members. · Promote teamwork, accountability, and a respectful work environment. Essential Functions: · Able to lift 30+ lbs. · Fluent in both written and spoken English. · Demonstrates positive leadership characteristics, which inspire team members to meet and exceed standards. · Ability to utilize traditional software programs such as Gmail, Microsoft Office (Word, Excel, Outlook, and PowerPoint), POS systems, and any additional systems as needed; · Email account for company communication purposes. · Ability to access and accurately input information using a moderately complex computer system · Attends mandatory meetings including staff meetings, leadership meetings, etc. · Communicates information effectively and efficiently. · Able to work nights, weekends and holidays, and variable schedule, per the needs of the business. · Ability to walk, stand, and/or bend continuously and for extended periods as required performing essential job functions. · Ability to perform essential job functions under pressure, maintain professionalism when working under stress work experience requirements • 2+ years’ experience as Line Operator of similar caliber education requirements • High school diploma or GED, • NY Department of Health & Mental Hygiene Food Protection Certificate, required Company DescriptionOUR STORY Orwashers Bakery is a New York City Institution. Founded in 1916 by Hungarian immigrant Abraham Orwasher, the bakery began as a small store in the Upper East Side. It was born out of a desire to serve local immigrant community members and focused on the high-quality rye, black, and grain breads that reflected the traditions of his homeland. It soon became a thriving wholesale business with deliveries being made by horse and buggy. Abraham's son Louis would go on to take over the business from his father, owning the building the bakery was housed in. Louis would go on to perfect the formulas of his father, while reinventing the bread sold. It is claimed that it was Louis who invented raisin pumpernickel bread, at Orwashers during World War II. In 2007, Mr. Orwasher sold the bakery to Keith Cohen, who stated plans to expand the bakery's offerings beyond Eastern European breads, adding artisanal breads from Italy, France, Ireland, and the United States. Since then, Keith and his team have worked hard to respect the brand's rich history while incorporating a distinctly current point of view. As part of this evolution, they have partnered with regional farmers for raw materials, are working with local wineries to create their starters and have developed a new line of contemporary artisan breads to satisfy today’s palates. We are grateful for the rich history and loyal patrons that have brought Orwashers this far and look forward to baking great bread for many more decades to come. Though our heritage is one of transformation and innovation, one thing will never change: Orwashers’ commitment to doing what is right. Our relentless pursuit for making ethical choices at all times is what has built trust in Orwashers—from our guests, business partners, and colleagues.OUR STORY\r\nOrwashers Bakery is a New York City Institution. Founded in 1916 by Hungarian immigrant Abraham Orwasher, the bakery began as a small store in the Upper East Side. It was born out of a desire to serve local immigrant community members and focused on the high-quality rye, black, and grain breads that reflected the traditions of his homeland. It soon became a thriving wholesale business with deliveries being made by horse and buggy. Abraham's son Louis would go on to take over the business from his father, owning the building the bakery was housed in. Louis would go on to perfect the formulas of his father, while reinventing the bread sold. It is claimed that it was Louis who invented raisin pumpernickel bread, at Orwashers during World War II.\r\n\r\nIn 2007, Mr. Orwasher sold the bakery to Keith Cohen, who stated plans to expand the bakery's offerings beyond Eastern European breads, adding artisanal breads from Italy, France, Ireland, and the United States.\r\n\r\nSince then, Keith and his team have worked hard to respect the brand's rich history while incorporating a distinctly current point of view. As part of this evolution, they have partnered with regional farmers for raw materials, are working with local wineries to create their starters and have developed a new line of contemporary artisan breads to satisfy today’s palates. We are grateful for the rich history and loyal patrons that have brought Orwashers this far and look forward to baking great bread for many more decades to come.\r\n\r\nThough our heritage is one of transformation and innovation, one thing will never change: Orwashers’ commitment to doing what is right. Our relentless pursuit for making ethical choices at all times is what has built trust in Orwashers—from our guests, business partners, and colleagues.

Job DescriptionJob Title: Engineering System OperatorDepartment: EngineeringMTA Agency: Long Island Rail RoadPrimary Location(s): Jamaica, NYPay Rate: $57.47* (See Wage Progression Chart)Regulated/Safety Sensitive: Safety SensitiveUnion Affiliation: Brotherhood of Railroad Signalman (BRS-241)Closing Date (if applicable): Open Until FilledShift (if applicable): Various Chartered in 1834, the Long Island Rail Road (LIRR) is the largest, busiest, and oldest continuously operating commuter railroad in the United States. In 2024, this 24/7/365 operation served 75.5 million riders on a system that stretches nearly 120 miles – from Penn Station and Grand Central Madison in Manhattan to Montauk on the eastern tip of Long Island. JOB SUMMARYThis is a training position established to qualify a candidate to assume the position of Engineer Systems Operator. This program will train the candidate to become familiar with all railroad and utility power distribution, MW Operations, and physical characteristics. Assist in providing a safe and efficient transportation system for the Railroad including Power, Communications, Track and Structures Systems while maintaining on-time performance. Keep the Chief Engineer, Asst. Chief Engineers, and Principal Engineers abreast of emergencies/operational issues and status. Assist in ensuring continuous around the clock, seven days a week coverage to immediately respond to all MW related emergencies, derailments, washouts, flooding, fires, vandalism, accidents, injuries, track and structures incident. Handle 35,000 power operations yearly. DUTIES & RESPONSIBLITIES: Responsibilities may include but are not limited to: • Assist in Managing and coordinating all Engineering Department decisions and operations made concerning the distribution of the entire Power system for the Long Island Rail Road. Control the equipment associated with the Third Rail System and Signal and Speed Control System., • Assist in Coordinating and implementing an effective Engineering Department response to all off-hour emergencies and problems (i.e., derailments, flooding, fires, vandalism, loss of power, etc.). Dispatch proper personnel to answer and expedite repairs involving Track, Structures and Power (Substations, High Tension and Electric Light & Power) disciplines. Coordinate trouble calls for Substation, Third Rail, High Tension, EL&P, Structures and Maintenance of Way areas. Assist in redirecting Signal and Communication calls to the proper Trouble Desk. Assist in Dispatching Maintenance of Way and Electric Traction emergency and night crews, managing all Maintenance of Way emergency call outs on a timely basis, have proper knowledge and understanding of all Call-Out agreements., • Assist in Developing and maintaining a comprehensive computer Data Base for failure reports, daily production reports, and trouble calls. Assist in Maintaining accurate records and logs of all Maintenance of Way and Power area activities and operations. Assist in Providing necessary daily reports and documentation; these activities will be kept on memory on a P.C. utilizing the most current software application., • Assist in developing and maintaining recording and processing of only Maintenance of Way staff Sick, Personal Day and Bereavement requests made during off hours. Assist in coordinating and filing all required forms, maintaining an accurate Data Base of such requests and submitting proper documentation. Assist in the Maintenance of accurate logs relative to non-power operations such as Accident Reports and safety statistics concerning the Power Discipline (Substations, High Tension & EL&P)., • Assist in the coordination of programmed power outages with Movement Bureau, Amtrak, Con Ed, LIPA, and Engineering Disciplines (Signal, Track, ET, Structures) and Capital Department., • Assist in Monitoring weather station, 24 hours, round the clock using the WDN Weather Consultant and DTN Datalite Weather Station, Platform Video Cameras, COMPUWEATHER and Brookhaven Lab Data in order to supply Railroad Management with the information necessary to make Operation decisions as consistent with emergency conditions., • Ensure a safe working environment and adherence to guidelines of company safety policies and procedures. Lead by example., • Perform other assignments as requested by Senior Management. REQUIRED EDUCATION AND EXPERIENCE Minimum experience as agreed between the Long Island Rail Road Company and the International Brotherhood of Electrical Workers Union Contract Agreement- Appendix F. If promotion cannot be reached by agreement, a candidate not covered by the IBEW agreement, must possess one of the following criteria:, • A minimum of five years demonstrated electrical/ LIRR Power department experience., • A minimum of two years’ experience in the traction power or utility field., • Previous experience as a Power Operator., • An Associate’s degree in Electrical Engineering, Electrical Technology or related field with two years electrical experience., • A Bachelor’s Degree in Electrical Engineering, Electrical Technology or related field with related technical knowledge in the field., • Must possess the ability to learn and retain the knowledge of Substation Equipment, (CRT BKRS [circuit breakers], Motor Generator, AC Switchgear, Relay Protection), Third-Rail Equipment (Rail, Board, Meg, Return, etc.), High Tension (Pole Lines, CRT [circuit] identification, Switches) and Electric Light & Power Facilities (Building, Elevators, Emergency Generators, Platform Lighting)., • Must possess the ability to learn and retain the knowledge of Track and Structures (M of W Switches, bridges, grade crossings, etc..) work maintenance procedures and materials., • Must possess the ability to learn and retain the knowledge of LIRR physical characteristics (ROW (right of way) and facility locations, road charts, etc.) and to keep abreast of system., • Must possess the ability to learn and retain the knowledge of proper Radio Communications procedures., • Must possess the ability to learn and retain an accurate knowledge of Union Work Rules to ensure applicable agreements are followed., • Must possess concise oral communications skills to express accurate and safe directions to managers, peers and subordinates., • Must possess ability to recognize, classify problems, and take proper action to remove power while under pressure in a precise and orderly fashion., • Must possess the ability to control the entire power plant from the supervisory control system., • Must possess knowledge of software programs (Data Ease, Word, Windows, etc.)., • Must possess electrical & mechanical knowledge of power distribution equipment which is essential for trouble shooting skills via the Supervisory Control., • Must possess the ability to learn and retain the knowledge of applicable call-out rules based on contractual agreements., • Must possess the ability to learn and retain the knowledge of Sick Leave and Benefits Administration policies and procedures., • Must possess ability to read and understand third rail drawings, Track charts, and signal and speed control diagrams. PREFERRED QUALIFICATIONS, • A Bachelors Degree in Electrical Engineering Wage Progression after completion of training: 80% -$45.97 90% - $51.72 100% - $57.47 OTHER INFORMATION • Employees driving company vehicles must complete defensive driver training once every three years for current MTA drivers; or within 180 days of hire or transfer for an employee entering an authorized driving position., • LIRR: In addition to meeting the minimum requirements of the position, the selection process may include but is not limited to, a pre-screening assessment (i.e., physical, written, and/ or practical evaluation) and interview. Candidates forfeit further consideration in the process if they fail to participate in any step of the process when scheduled. Make-up dates/times will not be given. In addition, LIRR employee applicants must be in their current position for the 12 months immediately preceding the close date of this posting and must possess a satisfactory work history, including attendance and discipline record. A record of more than ten sick days without medical documentation in two of the last three years is considered unsatisfactory attendance. Not all qualified applicants are guaranteed an interview due to the competitive selection process. A medical examination and safety-sensitive drug/alcohol test may also be required. #TapYourCareers #MTACareers EQUAL EMPLOYMENT OPPORTUNITY/ADA DISCLAIMERMTA and its subsidiary and affiliated agencies are Equal Opportunity Employers and encourage qualified applicants from diverse backgrounds, experiences, and abilities, including military service members, to apply.If you seek a reasonable accommodation for a medical condition or disability, or for a religious practice or observance, to participate in the job application or interview process, please notify your MTA representative once you have been contacted regarding the role.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The Financial Reporting Manager is a critical role responsible for overseeing the company's financial reporting, external audit coordination, and accounting policy framework. This position serves as a key liaison between internal stakeholders and external auditors, ensuring the accuracy and timeliness of monthly, quarterly, and annual financial statements and Board reporting. The role requires strong technical accounting expertise, exceptional organizational skills to manage complex reporting calendars and deadlines, and a commitment to continuous process improvement and internal control compliance. The ideal candidate brings proven leadership capabilities in team development, a detail-oriented approach to financial close processes, and the ability to implement and maintain robust accounting policies that drive clarity and consistency across the organization. Primary Duties/Responsibilities: • Prepare / Review Monthly, Quarterly and Annual Reports to the Board of Directors and manage the internal review for these documents., • Prepare / Review quarterly and annual audited financial statements., • Create and maintain Monthly Closing Calendar to inform parties of necessary deadline adherence for the following processes: financial close, Board of Directors Package and monthly reporting to the parent company in Europe., • Manage communications with external auditors on external financial statements and accounting issues to ensure auditor agreement with company decisions on accounting and reporting disclosures and issues., • Assist in the coordination of annual audit and interim activities of external auditors., • Create, implement and maintain comprehensive accounting policy documents to improve clarity and consistency., • Implement and maintain reporting procedures to comply with internal control requirements., • Perform continuous assessment of the close process and process re-engineering to reduce the timing to close the financial period., • Support month end and year end closing., • Train and supervise two team members in the financial reporting group., • Assists in developing and implementing continued training for professional accounting team members., • Participate in other projects as required. Work Environment: • This is a hybrid position located in our Paramus, NJ office.Qualifications Education/Experience/Background: • Bachelor's degree or higher in Accounting., • CPA with at least 6+ years of experience with a Big 4 or national accounting firm, with heavy exposure to SEC, financial reporting and internal controls; or a combination of public accounting and industry experience. Knowledge/Skills/Abilities: • An excellent knowledge of US GAAP and IFRS rules and regulations is required combined with the ability to research and propose company positions on complex accounting issues., • Knowledge of regulated utilities accounting and ASC 980 is highly desirable., • Proven people management experience with demonstrated ability to lead, mentor, and develop accounting professionals., • Strong coaching and performance management skills with a track record of building high-performing teams., • Excellent interpersonal and communication skills to effectively collaborate across all levels of the organization., • Ability to delegate effectively while maintaining accountability for team deliverables., • Ability to work in a fast-paced environment and manage well through ambiguity and complexity., • Ability to execute and follow-through to completion and documentation., • Strategic thinking combined with hands-on execution capabilities., • Knowledge of PeopleSoft and Oracle FCCS consolidation system is a plus. Additional Information Pay Range: $125000 to $135000 Per Year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 15% Annual Performance Bonus. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionDescription: Summary The Tower Crane Operator controls a fixed or traveling tower crane to lift, move and position heavy materials on high-rise and infrastructure projects. This position requires mastery of load charts, communication and precision controls, as well as strict adherence to safety protocols. Operators must be able to climb to the cab, work long shifts in varying weather and maintain focus and situational awareness at all times. Key Responsibilities • Pre-lift planning and inspection, • Review lift requirements with the lift director and understand site conditions that could affect crane operations., • Perform daily pre-operational inspections (wire rope, brakes, limit devices, hooks and critical parts) and ensure all control functions respond properly., • Use the crane’s load rating charts and diagrams to confirm the correct configuration for the load, site and lift conditions., • Operating the crane, • Operate tower cranes using levers, wheels or foot pedals to lift and move materials according to a lift plan or schedule., • Communicate constantly with riggers, signal persons and workers on the ground via radio or standardized hand signals to coordinate lifts and ensure safe loading/unloading., • Track wind speed, load charts and crane performance during shifts; pause operations when wind speeds or site conditions exceed safe limits., • Coordinate with other operators on multi-crane jobs to avoid conflicts and collisions., • Operate smoothly and avoid any practices that might divert attention while at the controls., • Safety and compliance, • Refuse to operate if any load or part of the crane could enter the danger zone of energized power lines., • Follow OSHA and ASME procedures for lock-out/tag-out during maintenance or when repairs are required., • Set brakes, lock devices and land suspended loads when power fails or before leaving the crane unattended., • Keep records of materials moved, daily inspections and any minor repairs performed., • Post-operational duties, • Secure the crane at the end of each shift, including bringing the hook to the highest position, releasing slewing brakes as specified, restraining travel and disengaging the master control circuit., • Report any needed adjustments or repairs promptly to a designated person., • Conduct frequent inspections and arrange for periodic operator re-qualification (every five years or sooner if necessary). Requirements: Required Qualifications • Education and Experience, • High school diploma or equivalent., • Several years of construction experience, preferably with hoisting, rigging or heavy-equipment operations., • Completion of a formal tower crane training program and apprenticeship is highly preferred., • Certification and Licensing, • Must be at least 18 years old and meet OSHA’s 29?CFR?1926.1427 training and certification requirements., • Hold an accredited tower crane operator certification such as NCCCO CCO-Tower Crane; pass both written and practical exams and maintain re-certification every five years., • Comply with any state or local licensing requirements (e.g., New York’s Certificate of Competence, Washington state permits)., • Physical and Medical Requirements, • Meet physical qualifications outlined by ASME B30.3: vision of at least 20/30 in one eye and 20/50 in the other, ability to distinguish colors, adequate hearing, and sufficient strength, endurance, agility and coordination., • Possess depth perception, manual dexterity and reaction time without tendencies to dizziness or seizures; pass substance-abuse screening and periodic physical exams., • Able to climb to the crane cab, work at height for long periods and tolerate extreme weather conditions., • Skills and Competencies, • Strong communication and teamwork skills for interacting with lift directors, riggers and other crew members., • Excellent coordination and steady hand-foot control to guide heavy loads precisely., • Mechanical aptitude to perform basic maintenance and identify equipment issues., • High situational awareness and problem-solving ability to adapt to changing site conditions., • Proficiency in reading and interpreting load charts, lift plans, safety documentation and manufacturer manuals. Working Conditions Tower crane operators spend most of their shifts in an enclosed cab perched high above ground level. The role involves exposure to heat, cold, wind and other environmental factors. Operators often work long hours with limited breaks and may experience periods of isolation. Duties can be physically demanding and mentally taxing, requiring sustained concentration, alertness and responsiveness in all weather. Training and Professional Development Employers typically expect completion of OSHA 10-Hour or 30-Hour Construction training, fall-protection and electrical-safety courses. Continuing education, periodic recertification and regular medical exams are required to maintain certification and compliance. Operators are encouraged to cross-train on other crane types and to stay current with emerging digital technologies (load-monitoring sensors, telematics, remote-control systems) to enhance lift accuracy and safety

Job Description EMARKETER is a subsidiary of Axel Springer SE, a family-owned transatlantic media company headquartered in Berlin and New York. Axel Springer's guiding principles – first articulated as The Essentials by founder Axel Springer in the aftermath of World War II – remain a cornerstone of the company's foundation today. Learn more about Axel Springer. We are hiring a Managing Director to join our Enterprise Accounts team at EMARKETER.The Role and Team: At EMARKETER, we're passionate about our customers' experience and ability to leverage our research and insight to make strategic decisions. As Managing Director of Enterprise Accounts, you will be responsible for managing a team of Account Managers and Account Directors to their fullest potential by coaching them to maximize growth opportunities in the largest and most strategic accounts in our business. You will report to the SVP of Global Account Management and work closely with the rest of the Account Management leadership team. This is a hybrid role based out of our New York City office, with regular in-office expectations. Applicants must be authorized to work in the United States without the need for visa sponsorship, now or in the future. Candidates must be within commuting distance of our New York City office. Relocation assistance is not available. The Ideal Candidate Is: • A strategic thinker: You and your team will be developing long-term strategies to maximize spend at our largest accounts and will often partner with cross-functional stakeholders, both internally and externally, • A dedicated coach: You love to manage and develop people, driving high performance through predictable and consistent coaching and meeting cadences and performance reviews, • A skilled negotiator: You and your team will be managing the largest, most complex accounts at EMARKETER and will frequently negotiate subscription contracts, • A results-driven leader: You recognize that we're all responsible for revenue; you'll partner with sales operations and your peers to use data/metrics to measure your team's actions and outcomes in qualitative and quantitative ways, • A growth-focused operator: You constantly think about scalable ways to retain and grow spend in our client base, • A team player: You welcome accountability for your/your team's goals and metrics and will work with other sales and account management leadership to ensure the success of the department's goals, • A confident communicator: You can provide guidance on how to effectively tailor messaging to ideal end users to articulate value in meeting their business objectives, whether in person, on the phone, or via email; you can communicate with your direct reports, peers, and managers in clear, concise ways, • A promoter of inclusion: Committed to fostering an inclusive culture and values a representative workplace that embraces diversity of thought and experience.Key Responsibilities:, • Manage a team of Account Managers and Account Directors who manage a diverse array of large corporate logos within the EMARKETER portfolio, • Develop strategies to retain and grow the existing bookings within the team's assigned accounts, • Own responsibility for a book of business/accounts and a team upsell quota, • Actively coach a team of Account Managers and Account Directors to their full potential leveraging high-performance team management strategies and tactics, • Partner with Account Management leadership and sales operations to analyze customer satisfaction and health scores in order to categorize accounts (growth, risk, etc.), • Proactively address growth opportunities as well as customers at risk for churn; positively impact customer health, • Work with direct reports to address customer objections, including renewal or upsell negotiations, • Work with sales enablement to train team members on new programs or processesDesired Skills & Experience:, • Track record of success as an individual contributor, • Experience successfully managing a team to achieve/overachieve specific goals and metrics with similar growth and retention expectations, • Experience with SaaS solutions, research, media, agencies, marketing & advertising, retail & ecommerce, or financial services companies, • Experience with strategic account planning at very large and complex organizationsSalary & Benefits:, • Base salary: $160,000-$175,000 (dependent on skills, experience, and competencies), • On-Target Earnings (OTE): $245,000-$260,000 (base + uncapped commission), • Unlimited PTO, 10 paid holidays, and 16 weeks of parental leave, • Comprehensive medical, dental, and vision insurance plans, • Matched and vested 401k plan, • Access to resources for financial planning guidance, family planning services, mental health reach-out, and Employee Assistance Programs (EAP), • Additional benefits include commuter benefits, phone reimbursement, gym membership discounts, and moreSalary for the role is commensurate with experience and depends on a number of factors, including a candidate's qualifications, skills, competencies and experience. US pay range $160,000—$175,000 USDAbout EMARKETEREMARKETER is the world's leading research company focused on digital transformation. We hire people who are passionate about providing business leaders with actionable data and insights in the areas of digital marketing and advertising, media, retail and ecommerce, financial services, healthcare, and more. Our clients, who rely on our content to make informed decisions, include top global brands within Fortune 1000 companies, as well as smaller firms striving to compete in a digital age.At EMARKETER, we pride ourselves on an inclusive work environment and continuously strive for diversity of thought, identity, and experience while encouraging growth and providing support to team members throughout the organization. EMARKETER is committed to corporate transparency through regular business updates and an always-open line of communication. What We Value Our people are the foundation of our success. Guided by our values, we: • Serve Our Clients: We prioritize their needs to deliver excellence in our products and services., • Work as One Team: We collaborate with trust, accountability, and transparency., • Innovate and Adapt: We foster curiosity, resilience, and fearless exploration of new ideas., • Celebrate Diversity and Inclusion: We embrace a diverse, inclusive environment where all voices are valued and respected.To learn more about what it's like to work at EMARKETER check out our careers page and life page.If this sounds like a great job for you, please apply online and tell us a bit about why you're a good fit for the role. Please note that for all positions at EMARKETER, there is an exercise component specific to the role to reduce selection bias in our recruiting process and test how you apply knowledge.

Job Description At Trunk Tools, we’re the leading AI company revolutionizing construction, the second-largest industry on earth. We recently raised a $40M Series B led by Insight Partners, bringing our total funding to $70M from top-tier investors including Redpoint and Innovation Endeavors. This new round is fueling our next phase of growth as we scale AI agents across the jobsite. Our mission is to build the future of construction through intelligent automation. Despite being a $13+ trillion industry, construction still runs largely on analog processes, we’re changing that by embedding AI directly into field operations. Founded by builders and technologists (Stanford, MIT), our team has delivered software used by over 140,000 field professionals, impacting millions of users and contributing to $10B+ in built projects. Many of us come from the field ourselves, giving us a deep understanding of the industry’s unique challenges. After years of building the “brain” of construction, we’re now launching production-ready AI agents, starting with intelligent document processing and Q&A, and rapidly expanding into core operational workflows. Our team has doubled in the past year, and with 100+ employees (50+ engineers), we’re scaling fast and entering a period of hypergrowth. This is a rare opportunity to join at an inflection point. Position Overview Trunk Tools is looking for Forward Deployed Experts (FDX) to drive AI adoption where it actually happens — on active jobsites. This is not a back-office role, and it is not a custom-engineering role. The FDX is a construction operator who has become deeply AI-fluent, embedded with a general contractor’s project teams to change how work gets done. You’ll be part of a deployed team that operates like a SWAT unit: driving adoption region by region, finding efficiency opportunities, and dropping into critical projects to get them back on track using the full AI stack — Trunk Tools products alongside additional cutting edge tools. You’ll consult on custom agent opportunities and partner with our product teams on them, but your job is behavioral change and adoption, not building agents. This role is field-embedded with heavy travel, up to 75%. Key Responsibilities Field Adoption & Behavioral Change Embed with project teams and superintendents to drive daily, hands-on use of Trunk Tools and the broader AI stack. Run workshops, competitions, and side-by-side coaching that turn skeptics into everyday users. Meet the field where it is — builder-to-builder, on the jobsite, under real-world pressure. Efficiency & Workflow Optimization Identify the highest-value AI use cases for each business unit and rebuild the workflow around them. Tie every push to a measurable outcome — time saved, cost reduced, or work won. Capture use cases and feed them back into the shared library so other teams and accounts benefit. Critical-Project SWAT Deploy into at-risk or high-priority projects and use the AI stack to get them back on track. Diagnose where teams are stuck and stand up practical, AI-enabled workflows fast. Tooling & Agent Consulting Advise on where custom agents would create value and partner with Trunk Tools product teams to scope them. Stay current across the AI tool landscape so you can match the right tool to the job. Train-the-Trainer & Handoff Certify customer champions and trainers so adoption sustains itself after our behavioral change program concludes. Transfer capability deliberately — the goal is a self-running team, then on to the next region or account. Measurement & Feedback Track adoption and behavioral-change metrics for your region and report them up. Bring field feedback back to Product to shape the roadmap. Qualifications Experience 5+ years in construction operations — superintendent, project engineer/manager, VDC/BIM, or field operations — with real time spent on active jobsites. Demonstrated, high AI fluency: a daily power-user of AI tools (Claude, ChatGPT, and others) who has already changed how they work. A track record of driving adoption or change in the field, and of turning around struggling situations. Skills & Knowledge Deep knowledge of construction workflows — submittals, RFIs, drawings, scheduling, and the daily grind of a project team. Strong AI-tool fluency and the instinct to match the right tool to the right workflow. A natural coach and communicator who earns trust on the jobsite. Comfortable with heavy travel and embedding on-site for stretches at a time. Education Bachelor’s in construction management, engineering, or a related field — or equivalent field experience. AI or tool-specific certifications are a plus. Why Trunk Tools? Innovative Culture: Work at the forefront of technology with a team that values innovation and continuous learning. Impactful Work: Help transform businesses with tools that drive real, measurable outcomes. Career Growth: Be part of a growing company with ample opportunities for personal and professional development. Competitive Compensation: We offer a competitive salary, benefits, and performance-based incentives. Work-Life Balance: Enjoy a supportive work environment that encourages a healthy work-life balance. What we offer 🎖️ A close-knit and collaborative early-stage startup environment where every voice is heard and every opinion matters 💰 Competitive salary and stock option equity packages 🏥 4 Medical Plans to choose from including 100% covered option. Plus Dental and Vision Insurance! 🤓 Learning & Growth stipend 🏠 Flexible long-term work options (remote and hybrid) 🥨 Free lunch provided in the office in NYC & Austin - you’ll never go hungry with us! 🛫 Unlimited PTO; We truly believe in work-life balance and that hard work should be balanced with time for rest and rejuvenation 🏝 IRL / In-Person retreats throughout the year Please note: All official communication from Trunk Tools will come from an email address ending in @trunk.tools. If you receive outreach from any other domain, please disregard it or report it to us. At Trunk Tools, we’re working hard to build a more productive and safer environment within the construction industry, and we strive to live by these same values here at Trunk Tools HQ. As an equal-opportunity employer, we are committed to building an inclusive environment where you can be you. We work hard to evaluate all employees and job applicants consistently, without regard to race, color, religion, gender, national origin, age, disability, pregnancy, gender expression or identity, sexual orientation, or any other legally protected class. Compensation Range: $148.5K - $200K

Job Description IBMC is assisting our client in seeking a Founder to take full operational and strategic ownership of a web development business with existing revenue and transform it into a scalable, independent company. This is not a freelance role and not a corporate management position. It is a founder-track opportunity for an experienced web development professional who wants to build and lead their own company, supported by capital, operational infrastructure, and an active venture-building partner. The selected Founder will relocate to Bali and work closely with our client to scale operations, grow revenue, build a high-performing team, and establish the business as a long-term standalone venture. Your Mission • Take full responsibility for building and scaling an existing web development business, • Transition the business from an operator-led service into a structured, scalable company, • Drive revenue growth, profitability, and operational excellence, • Build and lead a high-performing local and remote development team, • Shape service offerings, pricing models, and go-to-market strategy, • Establish internal systems, processes, and quality standards, • Act as Founder & CEO of the venture over time Responsibilities • Business Leadership, • Full P&L responsibility, • Strategic planning and execution, • Long-term vision and roadmap, • Operations & Delivery, • Oversee web development projects (custom websites, platforms, SaaS, etc.), • Ensure high delivery quality, timelines, and client satisfaction, • Implement scalable workflows and documentation, • Growth & Sales, • Improve existing revenue streams, • Develop new service offerings and packages, • Support sales, partnerships, and client acquisition strategies, • Team Building, • Recruit, train, and manage developers, designers, and project managers, • Build a strong company culture and execution mindset, • Create performance and incentive structures, • Collaboration, • Work closely with the venture-building team, • Leverage shared infrastructure (legal, finance, HR, strategy), • Report on KPIs, growth, and milestones Requirements • Proven experience in web development or digital agency businesses, • Agency founder, senior partner, CTO, or operational lead preferred, • Strong understanding of:, • Web technologies, frameworks, and modern development workflows, • Project management and client delivery, • Scaling service-based businesses, • Entrepreneurial mindset with ownership mentality, • Comfortable taking responsibility and making decisions, • Willingness to relocate to Bali and commit long-term, • Ambition to build a company, not just manage one Who This Role Is For • A web development professional who wants to step out of pure execution, • Someone who has the ambition to build their own company but values backing and structure, • A builder who wants real ownership, responsibility, and upside, • An operator who prefers action over theory Who This Role Is Not For • Freelancers looking for contract work, • Corporate managers without entrepreneurial ambition, • Candidates unwilling to relocate or commit long-term, • People seeking a 9–5 role Benefits • Equity participation in the venture (founder-level upside), • Base salary for financial stability, • Opportunity to build a standalone company under MS Capital Group, • Access to capital, strategic guidance, and venture-building resources, • Operational support (legal, finance, HR, structuring), • A clear path to becoming Founder & CEO

Job Description About Us SNY is an Emmy Award–winning regional sports media company delivering content across linear television and digital platforms. SNY provides unmatched, exclusive coverage of the New York Mets, New York Jets, and all things New York sports. As the Tri-State area’s leader in local sports coverage, SNY offers comprehensive access to professional and collegiate teams through exclusive live games, nightly sports shows, and original programming. SNY also delivers real-time New York sports news and exclusive digital series on SNY.tv and across its social channels, including YouTube, Facebook, X, and Instagram. SNY is available to viewers throughout New York, Connecticut, New Jersey, and northeastern Pennsylvania, and nationally through select providers. About the Role: SNY is seeking a skilled freelance Jib Operator with a passion for sports to join our Studio Operations team. This role works with our technical and news team in our production environment operating the Cammate Jib and handheld cameras. This role requires flexibility to work non-traditional hours, including weekends and holidays, from our studio at 4 World Trade Center. What You’ll Do • In coordination with the Director, create and offer visually interesting and varied subject shots., • Work with technical and news staff to satisfy production needs for live, taped and automated programming under supervision of the Director and Operations management., • Ability to proficiently operate Cammate Jib and hand-held cameras equally as dictated by productions demands., • Assist in maintaining the above cameras and rigs in good working order., • Willingness and ability to train others as needed for back-up purposes. What You Bring • Bachelor’s Degree (preferably in Communications) or equivalent work experience required., • Two (2) years of experience in live, multi-camera studio production preferred, with related camera operator experience required., • Knowledge of Cammate Jib along with Ikegami HD cameras., • Ability to identify and trouble shoot mechanical issues with equipment and set up., • Must be able to lift 25+lbs, set / strike studio gear., • Proficiency in iNEWS or similar newsroom software system a plus., • With proper training, serve as fill-in for all other Tech 1 positions as needed (i.e. Robotic Camera, Teleprompter, Video Playback, Video Shading)., • You have excellent interpersonal & communication skills and are a collaborative team player who works well with others, in a fast paced, dynamic studio environment.

Job Description Title: Machine Electronic Control Technician Reports To:Director of Package Development Scope:Provide support for the development, installation, operation, troubleshooting and repairs of packaging equipment, relating to all aspects of machine controls.Responsibilities: • Perform all duties following organization SOPs and cGMPs in accordance with CFR 21, Part 11, 210 & 211., • Work as team member or leader on coordination, design, fabrication and start-up of new projects., • Assists with PLC programming support on all machine integration projects, training of in house personnel, and documentation., • Assist with the installation, troubleshooting and replacement of electric and electronic devices., • Train engineering staff, packaging line mechanics, machine operators and QA inspectors in functions of electrical/electronic devices and basic machine control functions., • Develop and maintain setup sheets, maintenance programs related to inspection systems., • Coordinate all PLC programming, setup of vision systems, data matrix and barcode scanners and related electronic equipment or field devices, including technical and validation documentation., • Design controls and systems relating to operator interface and monitoring systems., • Ability to learn and support new systems, e.g.: Package Serialization, Servos and Vision systems., • Work as team member or leader on design, fabrication of new projects or assemblies and training of operators and the technical support staff on this equipment., • Assist in creation/ review of validation documentation and related support documents such as engineering studies, equivalency statements and test documents on all packaging equipment., • Develop and implement relevant SOPs, Change Controls, Equipment Evaluations and Engineering Studies., • Support and interact, as required, with the Sales, Business Ops, Quality, Purchasing, as well as the Packaging, and the Technical Groups to ensure project status and goals are well communicated and expectations are understood and realized., • Conduct or support investigations of field complaints, deviations or non-conformation events., • Provide direct support to production and projects on all shifts as needed., • Participate in "Off-hours" requests for assistance, • Perform all other tasks assigned.Qualifications:, • Associates degree in Electrical or Electronic Engineering or equivalent experience preferred., • 5-8 years related experience in a packaging enviroment., • Thorough knowledge of all packaging equipment and functions., • Understanding of general industrial process and control systems., • Effective problem solving skills required., • Perform all tasks following industry standards and cGMP’s., • Must be able to work independently and as part of the team., • Must have a good command of the English Language, both written and verbal., • Effective communication and problem solving skills and required., • Proficient using technical software such as PLC, Servo, Vision, HMI, Controls and support software related to the performance of the job., • Proficient using office environment software such as QAD, Excel, Word, Project, and software related to the performance of the job.Physical Demands:, • Ability to lift and transport up to 30 pounds., • Ability to safely move around machines and equipment., • Ability to work in a standing position for 100% of the time or to work in a sitting position for 100% of the time., • The person in this position is required to communicate to employees in all position levels. He/she must be able to exchange accurate information in these circumstances., • Must be able to wear all Personal Protective Equipment (PPE) and gowning as required., • Ability to tolerate fumes from heat and print processes typical in the packaging environment

Job DescriptionAbout UsCanary Technologies is changing the game for hotels with modern software powered by Canary's hospitality-specific AI platform. Canary is utilized by 20,000+ hoteliers in 100+ countries to equip hoteliers with the technology they need to work smarter and wow their guests. Major hotel brands such as Wyndham, Marriott, IHG, Four Seasons, Rosewood, and Best Western trust Canary to deliver results. Canary was named a 2024 Deloitte Technology Fast 500™ company, a Most Innovative Company by Fast Company and a HotelTechReport Best Place to Work — and is backed by top Silicon Valley investors like Y Combinator, F-Prime, Brighton Park Capital and Insight Partners. Join us in shaping the future of hospitality! About the Role Canary Technologies is hiring a Head of Product Design to own the design system, information hierarchy, and interaction principles that govern every surface of Canary's platform — for human users and AI agents alike. Most design system roles are about consistency for humans. This one is about building the design language that AI agents obey. You're not just making a dashboard pretty — you're defining the rules of interaction for a platform where AI is increasingly the operator. That's a new kind of design leadership, and we want someone who sees it that way. Canary's product surface is expanding fast across checkin, messaging, upsells, voice, and more. We need someone obsessive about consistency, hierarchy, and systematic design who can establish principles that scale — not just across screens, but across a future where AI agents are primary users of our interfaces. The design system you build won't just guide human designers; it will be the contract that AI follows. Responsibilities • Define and enforce a unified design system across all Canary product surfaces — components, spacing, typography, color, layout patterns, and page-level templates, • Establish clear information hierarchy standards so every page communicates priority, status, and action with zero ambiguity, • Build design principles rigid enough to be programmatically enforced and flexible enough to serve diverse hospitality workflows, • Create specifications precise enough that AI coding agents can generate UI that meets your bar without human review, • Audit existing surfaces ruthlessly and drive convergence toward a single coherent system, • Partner closely with engineering and product to make the design system the source of truth — not a side artifact, • Think deeply about how AI agents (voice, chat, autonomous) interact with and present Canary's UI, and design for that as a first-class use caseQualifications, • 8+ years in Product Design with 3+ years leading teams directly. Experience operating in B2B or B2B2C SaaS preferred., • Portfolio demonstrating end-to-end systems thinking, exceptional product craft, and shipped work at scale across web and mobile is essential., • Proven ability to recruit, develop, and retain diverse design talent. Strength in feedback, coaching, and org-building., • Strong partner to Product and Engineering. Comfortable in ambiguity, rapid iteration, and enterprise constraints., • You are inspired by companies like Rippling, Linear, or Stripe where systematic design creates product clarity, • Fluency in design systems, accessibility, UX research methods, and experimentation. Familiarity with analytics tools., • Excited by the idea that your design system becomes the rulebook for AI agents building and operating UI, • Meticulous, opinionated, and able to hold the line on standards while moving fast, • Comfortable being both hands-on (Figma, tokens, specs) and strategic (principles, governance, cross-pod alignment)Compensation Target cash compensation ranges from $250,000-$290,000, including a fixed annual salary and a performance-based bonus paid quarterly. This role also includes a stock option grant, subject to board approval. Actual compensation will be commensurate with the candidate's skill level, experience, and specific work location. We also work hard to ensure Canary is a fun and exciting place to work! Here are some of the additional benefits: Canary Days: As a company we want to ensure that the team has time to recharge. Each month we provide company wide days off to ensure there is at least one extended weekend or day off. Self Improvement Club: We meet each month and share our personal goals for the month. Each individual is provided a budget towards any purchases that help us achieve these goals. Professional Development Chats: We provide budget to help drive cross functional professional development conversations across the organization. Travel Reimbursement: Team members are able to visit our offices across New York, San Francisco or Dallas when they choose, and are provided a travel stipend for doing so. Spend time working with the team in their office, and use the rest of your time exploring a new city! Personal Travel Reimbursement: If you stay at a hotel that Canary works with, we provide a credit towards your stay. Canary Technologies is an equal opportunity employer. We recruit, employ, train, compensate and promote talent regardless of race, religion, ethnicity, national origin, citizenship, gender, gender identity, sexual orientation, age, veteran status, disability, genetic information or any other protected characteristic. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Fire Sprinkler Technician Apprentice Allstate Sprinkler LLC is a leading provider of fire protection services in the greater New York City market headquartered in the Bronx, NY. As a member of Guardian Fire Protection Services, one of the fastest-growing fire, life safety, and security platforms in the United States, Allstate combines local market expertise with the resources and scale of a regional leader. Guardian operates across multiple states with 700+ team members and more than 24 office locations and is committed to delivering exceptional customer experiences, technical excellence, and a culture people are proud to join. This is an opportunity for an experienced operator and business leader to lead one of the most active and strategically important fire protection operations in the country. About the Opportunity AllState Sprinkler is currently hiring Apprentice for the Fire Sprinkler division. This is a great opportunity to learn a growing and in demand and essential trade. Guardian will train you to become a licensed, certified Fire Sprinkler Technician. We are looking for hard working and hands-on individuals that want to learn a new trade in the fire protection industry. The fire protection industry is in high demand and it can be a long term career that can provide a well paying income with training, certification and years of quality hard work. Compensation • This is an Hourly position and the pay rate is contingent on experience and background. It will be discussed during the interview process., • Potential Quarterly Bonuses Job Duties • Assist in the service, repair, inspections, and maintenance of fire sprinkler systems., • Support technicians with inspections, testing, and troubleshooting of wet, dry, pre-action, deluge, and standpipe systems., • Learn and follow NFPA standards, local codes, and company safety procedures., • Perform basic pipe fitting, cutting, threading, grooving, and assembly tasks under supervision., • Assist with loading, unloading, and transporting tools, materials, and equipment to job sites., • Maintain a clean and organized work environment at customer locations and company facilities., • Complete required training programs and safety certifications., • Accurately document work performed and assist with service reports., • Communicate professionally with customers, coworkers, and supervisors., • Follow all OSHA, company, and customer safety requirements. Qualifications • A current valid driver's license with 3 or less points is required., • Three years of licensed driving experience is required., • Experience using a variety of hand tools such as channel locks and pipe wrenches., • Willing to work varied hours, nights, early morning and weekend shift when needed., • Capable and willing to learn and study about the different fire sprinkler systems in order to pass tests and become certified., • Must be comfortable working on ladders 6 to 12ft and on lifts., • Ability to lift up to 70lbs, • Ability to work overhead and in unusual or small spaces such as attics and crawl spaces, • Skills to communicate well with customers and explain the work being done and any repairs that are necessary., • Skills to write well and be very detailed in your write up on service work., • Must be well organized and be able to keep track of service tickets and process all required documents for each service performed. Benefits • 401K, • Medical, Dental and Vision Insurance, • Short Term Disability, • Long Term Disability, • Life and AD&D insurance, • Vacation and Personal time, • Paid holidays, • Tuition Reimbursement AllState Sprinkler, LLC is an Equal Employment Opportunity (EEO) employer and prohibits employment discrimination for employees and applicants based on his or her age, race, color, pregnancy, gender, gender identity, sexual orientation, national origin, religion, marital status, citizenship, or because he or she is an individual with a disability, protected veteran or other status protected by federal, state, and local laws. Job Type: Full-time This link leads to the machine-readable files that are made available in response to the federal Transparency in Coverage Rule and includes negotiated service rates and out-of-network allowed amounts between health plans and healthcare providers. The machine readable files are formatted to allow researchers, regulators, and application developers to more easily access and analyze data. #AllStateSprinkler #FireProtection #FireSprinklers #Apprenticeship #Hiring #BronxNY #NYCJobs

Job DescriptionBenefits: • Dynamic, Respectful, and Sociable Working Environment, • Competitive Compensation, • Competitive salary, • Employee discounts, • Flexible schedule, • Training & development, • Opportunity for advancement We are seeking an experienced chef and kitchen operator to lead a high-volume upscale casual restaurant. This is a hands-on leadership position for a working chef who leads from the line, running expo, maintains standards during service, develops kitchen staff, and drives operational excellence. The successful candidate will be responsible for improving kitchen performance through strong leadership, communication, organization, and accountability. This is not a desk job. We are looking for someone who is comfortable running expo, working stations when needed, coaching cooks, and leading by example during busy services. Responsibilities: • Lead daily kitchen operations and service execution, • Manage and improve ticket times, food quality, and consistency, • Oversee expo during service and maintain communication between FOH and BOH, • Train, develop, and hold kitchen staff accountable, • Manage food ordering, inventory, and product organization, • Monitor food cost, waste, and kitchen efficiency, • Ensure compliance with all food safety and sanitation standards, • Assist with menu development, specials, and recipe consistency, • Build systems that support long-term operational success Qualifications: • Proven experience leading a high-volume restaurant kitchen, • Strong cooking and expo experience required, • Experience with ordering, inventory management, and food cost controls, • Ability to coach and develop kitchen staff, • Strong organizational and communication skills, • Professional, dependable, and accountable leadership style, • Ability to remain calm and effective during busy service periods Compensation: • Competitive salary based on experience, • Performance and growth opportunities availablePlease submit resume and availability for consideration.

Job Description Chef Operator [Executive Chef/General Manager] COMPENSATION: Salary Range: $80,000-85,000/year with annual increase + quarterly bonus with high growth potential PERKS AND BENEFITS: • 16 weeks of Fully Paid Parental Leave (for primary and secondary caregivers), • Health Insurance (Medical, Dental, and Vision), • Paid Time Off, • 401K Program, • Phone Reimbursement, • Commuter Benefits, • Complimentary DIG Meals every day, • Short-Term Disability ABOUT THE ROLE: As a Chef Operator, you will build a team that is driven by culinary excellence, and lead them to new skills in our scratch-based kitchen. You are a dynamic leader who loves to train, mentor, and develop your teams into future leaders by teaching them new skills everyday and showing up as your best self. You're an achiever who has a strong sense for operations and is driven by results. In our operation centered around innovation, you are always looking at business from a strategic, and systematic lens to set you and your team up for success. Staying organized while managing logistics and thinking big picture in a fast paced environment is key to your role as Chef Operator. We are constantly evolving our menu and testing new initiatives to improve our business operations. You will effectively manage, delegate and multitask to ensure your team is well equipped to handle any new challenge. You will clearly communicate and uphold culinary standards, roll out new projects/initiatives, and keep up with all DOH guidelines, all while inspiring your team to work towards a better food future. You are responsible for managing the entire restaurant operation and maintaining oversight over all front-of-house and back-of-house ops. ABOUT THE TEAM: Our Restaurants run using a traditional brigade system. As the Chef Operator, you are the first in command and have a true sense of ownership over your restaurant. You partner directly with the Chef de Cuisine to drive success and report to the Field Leadership Team. You work collaboratively with the other restaurant leaders to ensure the restaurant team is well-trained and organized to provide guests with an experience that goes beyond a great meal. DIG is determined to help support the next generation of farmers, cooks and chefs! YOU WILL: • Be responsible for the entire restaurant operation, including PnL responsibilities such as food cost management, labor efficiency, guest experience and building top-line sales., • Collaborate with the CDC on QA processes and convert guest feedback into actionable insights for the team., • Manage new initiatives and scheduled launches within the restaurant while instilling an entrepreneurial spirit in your team to keep them excited and engaged., • Monitor the operational flow of the restaurant, ensuring culinary and DOH standards/protocols are being followed and executed., • Manage all problems with technology, systems and/or offsite ordering platforms. You are proactive in troubleshooting and can handle all the moving pieces with ease., • Be the face of hospitality by both interacting with guests and delivery drivers to provide exceptional service and training up concierge roles in the restaurant to do the same., • Ensure that all employee relations conversations are properly documented and communicated to HR, including performance and GROW model conversations., • Manage recruitment needs for your restaurant by proactively interviewing, hiring and onboarding new culinarians., • Review & collaborate on people development plans with the Field Leadership team to build thoughtful succession plans., • Communicate verbally and digitally on a daily basis across various systemic and conduct Pre-shifts & Chef's tables with your restaurant team to keep them informed on updates and new restaurant goals., • Strictly uphold Dig's anti-discrimination and anti-harassment policies. YOU HAVE: • 3 - 5 years minimum kitchen or operational restaurant management experience., • A passion for real, good food and the leadership skills to operate a scratched base, every changing kitchen., • The willingness to roll up your sleeves and pitch in whenever and wherever necessary., • The demonstrated skills to motivate and develop a high-performing team., • The discipline and desire to create systems and organization within fast changing environments., • Excellent communication skills and an eye for detail., • Strong computer skills. You can navigate multiple digital ordering systems with ease., • Ability to learn technological platforms and work systematically with them., • Familiarity with restaurant costing and inventory software., • The ability to perform physical requirements of the position (the ability to frequently lift up to 25 pounds and occasionally lift up to 50 pounds). These physical requirements may be accomplished with or without reasonable accommodations., • The desire for professional improvement and the process of learning., • The drive to network and build strong ties in your restaurant's community., • The ability to take many variables to find the best solution to a problem., • Your Department of Health and/or ServSafe certification. COMPENSATION: Salary Range: $80,000-85,000/year with annual increase + quarterly bonus with high growth potential Our salary ranges are rooted in the desire to pay competitively relative to our organization size and industry, reflecting just one part of the total compensation package; additional components include quarterly bonus potential, healthcare benefits, various work perks (commuter benefits, free lunch) as well as opportunities for continued growth at DIG. Individual compensation decisions are determined by factors that include skills-based qualifications, prior work experience, and balancing internal equity relative to other DIG employees. We expect the majority of candidates who are offered roles at DIG to fall healthily within the ranges based on these factors ABOUT US: To learn more about our mission and food please visit our website at: https://www.diginn.com/mission NOTE: DIG believes in the power of a shared table to bring people together as we are committed to building a culturally inclusive team. Female, LGBTQ+, BIPOC, and diverse candidates are encouraged to apply ADDITIONAL ROLE NOTES: The duties of this position may change from time to time. Dig reserves the right to add or delete duties and responsibilities at the discretion of Dig or its managers. This job description is intended to describe the general level of work being performed. It is not intended to be all-inclusive. Dig is proud to be an Equal Opportunity Employer. We do not discriminate on the basis of race, age, ancestry, creed, color, religion, gender, sexual orientation, pregnancy, childbirth, breastfeeding or related condition, unemployment status, gender identity or expression, transgender status or gender dysphoria, marital status, domestic violence, sexual violence or stalking victim status, national origin, citizenship, disability, covered veteran and/or military status, genetic information or predisposing genetic characteristic, familial status as that term is described under the New York State Human Rights Law, caregiver or partnership status as those terms are defined under the New York City Human Rights Law (if you are employed in New York City) or other protected status or any other characteristic as protected under applicable federal, state and local law ("Protected Status")

The Forklift Operator is responsible for the safe, accurate, and efficient loading, unloading, staging, scanning, and movement of freight. As certified forklift operators within the operation, they provide safe, accurate, and efficient loading, unloading, movement, and documentation of cargo/freight within a multimodal transportation terminal, intermodal yard, warehouse, or dock environment, directly contributing to productivity, workflow coordination, and freight integrity. As the most experienced team members without direct reports, they often assist with mentoring, guiding, and onboarding new Material Handlers and solving complex operational problems on the floor. Compensation $21.56 per hour Schedule: Monday- Friday 10am-6:30pm Responsibilities Load and unload freight using sit-down/stand-up forklifts and reach trucks, along with other appropriate Material Handling Equipment (MHE), such as pallet jacks, carts, and dollies, and approved physical lifting techniques. Move, stage, sort, and position freight between dock doors, trailers, and designated warehouse areas in accordance with operating procedures. Pick, pack, and prepare items for shipping and delivery. Assist drivers with loading and unloading activities following dock and safety procedures. Label, scan, and track freight using handheld scanning devices and company systems to ensure accuracy and documentation integrity. Identify damaged freight and promptly report issues, unsafe conditions, or equipment concerns to supervisory personnel. Abide by all company safety policies, OSHA requirements, and PPE standards. Maintain a clean, safe, and organized dock environment, including work areas, tools, and MHE. Perform tasks under appropriate supervision while learning equipment operation, safety protocols, and job procedures (for developing roles). Support dock productivity, workflow efficiency, and overall operational goals. Work assigned schedules, including nights, weekends, holidays, and overtime based on business needs. Safely and accurately handle oversized, high‑value, or complex freight. Assist with dock coordination, workflow management, and problem resolution. Prioritize freight and coordinate task assignments, sometimes acting in a lead capacity (without direct supervisory responsibility). Serve as a subject‑matter expert on dock operations, equipment, and procedures. Train, mentor, and support the development of other Material Handlers. All other duties as assigned to meet evolving business needs. Qualifications Education: High School Diploma or General Education Development (GED)/equivalent preferred but not required. Certification/Licensure: Valid forklift certification/licensure (or ability to obtain before operating equipment) required. Experience: 3+ years of dock or warehouse experience required. Communication: Ability to communicate effectively in English, verbally and in writing, to understand safety and operational instructions, work assignments, and freight documentation. Ability to recognize numbers, labels, barcodes, and freight markings accurately, and to perform basic arithmetic to verify freight counts, quantities, and weights. Basic arithmetic skills to verify freight counts, quantities, and weights. Technology: Willingness and ability to learn and use basic computer systems, handheld scanners, and freight-tracking devices. Equipment: Ability to safely operate material handling equipment (MHE) such as pallet jacks, dollies, hand trucks, order pickers, pallet riders, conveyors, dock plates, dock levelers, sit-down/stand-up forklifts and reach trucks (with company-assisted certification/training), and/or other specialized MHE as required by the site. Ability to maintain regular and predictable attendance. Physical Demands: Extensive standing, walking, bending, stooping, kneeling, crouching, reaching, and twisting for 8-12 hours per/shift, with the ability to lift, push, pull, and carry freight up to 50lbs without assistance, with occasional lifting of freight up to 75lbs with assistance or mechanical aids throughout each 8-12 hour shift, multiple times per/week. Vision, hearing, and verbal communication skills sufficient to work safely in a noisy dock environment. Environment: Ability to work safely around moving equipment, vehicles, and freight in a non-climate-controlled environment, including frequent exposure to temperature extremes (both hot and cold), occasional outdoor work and/or exposure to precipitation (rain, sleet, snow, etc.), regular exposure to moving equipment, vehicle traffic, exhaust, dust, and moderate to loud noise. #LI-onsite #LI-MP2

Forklift Operator Compensation: $19 - 23 Per Hour The Forklift Operator is responsible for the safe, accurate, and efficient loading, unloading, staging, scanning, and movement of freight. As certified forklift operators within the operation, they provide safe, accurate, and efficient loading, unloading, movement, and documentation of cargo/freight within a multimodal transportation terminal, intermodal yard, warehouse, or dock environment, directly contributing to productivity, workflow coordination, and freight integrity. As the most experienced team members without direct reports, they often assist with mentoring, guiding, and onboarding new Material Handlers and solving complex operational problems on the floor. Responsibilities: Load and unload freight using sit-down/stand-up forklifts and reach trucks, along with other appropriate Material Handling Equipment (MHE), such as pallet jacks, carts, and dollies, and approved physical lifting techniques. Move, stage, sort, and position freight between dock doors, trailers, and designated warehouse areas in accordance with operating procedures. Pick, pack, and prepare items for shipping and delivery. Assist drivers with loading and unloading activities following dock and safety procedures. Label, scan, and track freight using handheld scanning devices and company systems to ensure accuracy and documentation integrity. Identify damaged freight and promptly report issues, unsafe conditions, or equipment concerns to supervisory personnel. Abide by all company safety policies, OSHA requirements, and PPE standards. Maintain a clean, safe, and organized dock environment, including work areas, tools, and MHE. Perform tasks under appropriate supervision while learning equipment operation, safety protocols, and job procedures (for developing roles). Support dock productivity, workflow efficiency, and overall operational goals. Work assigned schedules, including nights, weekends, holidays, and overtime based on business needs. Safely and accurately handle oversized, high‑value, or complex freight. Assist with dock coordination, workflow management, and problem resolution. Prioritize freight and coordinate task assignments, sometimes acting in a lead capacity (without direct supervisory responsibility). Serve as a subject‑matter expert on dock operations, equipment, and procedures. Train, mentor, and support the development of other Material Handlers. All other duties as assigned to meet evolving business needs. Qualifications: Education: High School Diploma or General Education Development (GED)/equivalent preferred but not required. Certification/Licensure: Valid forklift certification/licensure (or ability to obtain before operating equipment) required. Experience: 3+ years of dock or warehouse experience required. Communication: Ability to communicate effectively in English, verbally and in writing, to understand safety and operational instructions, work assignments, and freight documentation. Ability to recognize numbers, labels, barcodes, and freight markings accurately, and to perform basic arithmetic to verify freight counts, quantities, and weights. Basic arithmetic skills to verify freight counts, quantities, and weights. Technology: Willingness and ability to learn and use basic computer systems, handheld scanners, and freight-tracking devices. Equipment: Ability to safely operate material handling equipment (MHE) such as pallet jacks, dollies, hand trucks, order pickers, pallet riders, conveyors, dock plates, dock levelers, sit-down/stand-up forklifts and reach trucks (with company-assisted certification/training), and/or other specialized MHE as required by the site. Ability to maintain regular and predictable attendance. Physical Demands: Extensive standing, walking, bending, stooping, kneeling, crouching, reaching, and twisting for 8-12 hours per/shift, with the ability to lift, push, pull, and carry freight up to 50lbs without assistance, with occasional lifting of freight up to 75lbs with assistance or mechanical aids throughout each 8-12 hour shift, multiple times per/week. Vision, hearing, and verbal communication skills sufficient to work safely in a noisy dock environment. Environment: Ability to work safely around moving equipment, vehicles, and freight in a non-climate-controlled environment, including frequent exposure to temperature extremes (both hot and cold), occasional outdoor work and/or exposure to precipitation (rain, sleet, snow, etc.), regular exposure to moving equipment, vehicle traffic, exhaust, dust, and moderate to loud noise. #LI-Onsite #LI-MP1

The Forklift Operator is responsible for the safe, accurate, and efficient loading, unloading, staging, scanning, and movement of freight. As certified forklift operators within the operation, they provide safe, accurate, and efficient loading, unloading, movement, and documentation of cargo/freight within a multimodal transportation terminal, intermodal yard, warehouse, or dock environment, directly contributing to productivity, workflow coordination, and freight integrity. As the most experienced team members without direct reports, they often assist with mentoring, guiding, and onboarding new Material Handlers and solving complex operational problems on the floor. Compensation $21.56 per hour Schedule: Monday- Friday 10am-6:30pm Responsibilities Load and unload freight using sit-down/stand-up forklifts and reach trucks, along with other appropriate Material Handling Equipment (MHE), such as pallet jacks, carts, and dollies, and approved physical lifting techniques. Move, stage, sort, and position freight between dock doors, trailers, and designated warehouse areas in accordance with operating procedures. Pick, pack, and prepare items for shipping and delivery. Assist drivers with loading and unloading activities following dock and safety procedures. Label, scan, and track freight using handheld scanning devices and company systems to ensure accuracy and documentation integrity. Identify damaged freight and promptly report issues, unsafe conditions, or equipment concerns to supervisory personnel. Abide by all company safety policies, OSHA requirements, and PPE standards. Maintain a clean, safe, and organized dock environment, including work areas, tools, and MHE. Perform tasks under appropriate supervision while learning equipment operation, safety protocols, and job procedures (for developing roles). Support dock productivity, workflow efficiency, and overall operational goals. Work assigned schedules, including nights, weekends, holidays, and overtime based on business needs. Safely and accurately handle oversized, high‑value, or complex freight. Assist with dock coordination, workflow management, and problem resolution. Prioritize freight and coordinate task assignments, sometimes acting in a lead capacity (without direct supervisory responsibility). Serve as a subject‑matter expert on dock operations, equipment, and procedures. Train, mentor, and support the development of other Material Handlers. All other duties as assigned to meet evolving business needs. Qualifications Education: High School Diploma or General Education Development (GED)/equivalent preferred but not required. Certification/Licensure: Valid forklift certification/licensure (or ability to obtain before operating equipment) required. Experience: 3+ years of dock or warehouse experience required. Communication: Ability to communicate effectively in English, verbally and in writing, to understand safety and operational instructions, work assignments, and freight documentation. Ability to recognize numbers, labels, barcodes, and freight markings accurately, and to perform basic arithmetic to verify freight counts, quantities, and weights. Basic arithmetic skills to verify freight counts, quantities, and weights. Technology: Willingness and ability to learn and use basic computer systems, handheld scanners, and freight-tracking devices. Equipment: Ability to safely operate material handling equipment (MHE) such as pallet jacks, dollies, hand trucks, order pickers, pallet riders, conveyors, dock plates, dock levelers, sit-down/stand-up forklifts and reach trucks (with company-assisted certification/training), and/or other specialized MHE as required by the site. Ability to maintain regular and predictable attendance. Physical Demands: Extensive standing, walking, bending, stooping, kneeling, crouching, reaching, and twisting for 8-12 hours per/shift, with the ability to lift, push, pull, and carry freight up to 50lbs without assistance, with occasional lifting of freight up to 75lbs with assistance or mechanical aids throughout each 8-12 hour shift, multiple times per/week. Vision, hearing, and verbal communication skills sufficient to work safely in a noisy dock environment. Environment: Ability to work safely around moving equipment, vehicles, and freight in a non-climate-controlled environment, including frequent exposure to temperature extremes (both hot and cold), occasional outdoor work and/or exposure to precipitation (rain, sleet, snow, etc.), regular exposure to moving equipment, vehicle traffic, exhaust, dust, and moderate to loud noise. #LI-onsite #LI-MP2

Job Description JOB DESCRIPTION Job Title General Manager Department Front of House Supervisor Director of Operations, Owners Type of Position ☒ Salary ☐ Hourly ☐ Tipped Status (check all that apply) ☒ Exempt ☐ Non-exempt Overall Responsibilities: The General Manager (GM) is the operational and cultural leader of the venue, responsible for ensuring smooth daily operations while developing and maintaining a high-performing team. The GM oversees all front-of-house functions, enforces brand standards, and ensures an exceptional guest experience while meeting revenue and labor goals. A successful GM at GAH is a proactive operator, team builder, communicator, and problem-solver who can confidently manage service, train staff, enforce company policies, and protect the business’s profitability and reputation. Day-to-day responsibilities include staffing, service oversight, training, budgeting, reporting, and upholding food safety and HR compliance. The GM must model professionalism, foster a collaborative and inclusive work environment, and lead by example during service. PHYSICAL JOB REQUIREMENTS Standing for long periods of time. Ability To Lift/Pull/Push up to 50 LBS. Able to walk, stand, and/or bend continuously and for extended periods as required to perform essential job functions. Able to work nights, weekends, holidays, and variable schedules, per the needs of the restaurant. RESPONSIBLITY Operations & Leadership Ensure the restaurant is fully and appropriately staffed, trained, and prepared for service. Train and hold all FOH staff accountable to GAH's service standards, policies, and procedures. Oversee daily service execution with a strong, hands-on floor presence. Monitor restaurant cleanliness, maintenance, and readiness at all times. Ensure guest satisfaction and lead all service recovery efforts. Financial & Administrative Monitor and manage labor, COGS, and budgets to meet weekly, monthly, and quarterly goals. Oversee and execute scheduling for all FOH departments on a weekly basis. Daily manage timekeeping accuracy for all hourly employees. Track and report on sales, labor, and other key performance indicators. Collaborate with ownership and DOO on budgeting, forecasting, and revenue strategies. Team Development & Culture Ensure all FOH staff go through proper onboarding, training, and development tracks. Provide consistent coaching, feedback, and performance evaluations. Uphold and enforce all company policies, labor regulations, and HR standards. Foster a positive, inclusive, and disciplined team environment. Lead pre-shift meetings, service training, and staff communication initiatives. OPENING & CLOSING Ensure all staff is accounted for and adjust staffing based on business forecasts. Review reservations and flow with management team and Maître d'. Review and communicate any menu changes or specials. Lead pre-shift meetings and team preparation. Manage staffing cuts and shift transitions. Handle financial reports and nightly closeouts. Record service notes and shift summaries in Toast. Secure the venue at close (lock-up). SERVICE Supervise and ensure quality through all steps of service. Assist team by greeting tables, running drinks, taking orders, bussing, etc. Anticipate and prevent guest issues through proactive oversight. Manage guest complaints and follow through on service recovery. Maintain strong communication with Heart of the House, including during peak hours. Log and follow up on any significant guest, staff, or product-related issues. Lead staff transitions between day/night service shifts. OVERALL RESTAURANT CONTROL Set and review weekly sales forecasts with the ownership/DOO. Create schedules within budget and aligned to projected labor needs. Handle and follow up on any staff-related HR issues with HR/DOO support. Respond to and resolve guest complaints promptly and professionally. Interview, hire, and onboard staff in collaboration with HR and operations leaders. Execute all training protocols for new and existing staff. Maintain and update POS system. GOLDEN AGE HOSPITALITY IS AN EQUAL OPPORTUNITY EMPLOYER

Job Description Lycamobile is seeking a talented Account Executive to join their Sales Team in Queens, NY. The individual will report to the Team Lead, Area Sales Manager or Regional Sales Manager. This position might be remote with a weekly commute to the Queens, NY office. Position: The position is responsible for driving sales performance and related metrics of the associated territory to maximize company revenue. This is an outside sales position. The Account Executive is accountable for all activities contributing to the success of Retailers in his/her area of responsibility, including but not limited to: sales volume, dealer inventory levels, training, relationship building, merchandising, small business consulting, and brand advocacy in a retail environment. Through the Account Executive’s effort in reinforcing, the goal is to grown the customer activation and replenish activities of the Retailers who are: actively promoting Lycamobile, sufficiently inventoried, properly merchandised, knowledgeable of Lycamobile products and services, and selling Lycamobile as a primary brand in the store’s portfolio. These Retailers are both Independent and National. Responsibilities: · Drive company revenue · Increase customer’s activations (sales by dealer to customers) in the assigned territory · Grow the distribution and ensure the Retailers have an adequate supply of stock & merchandising/marketing materials · Educate and train Retailers on service offerings, systems and processes · Maintain and build relationships with store personnel · Improve the customer experience within the retail environments · Report daily activity, store level conditions, trends, and competitive data · Provide feedback on Retailer and consumer interactions · Develop, implement, and maintain a business plan for the designated region, driving measurable results for stores · Conduct store visits and phone call within region · Continue to expand sales through establishing and maintaining Retailer contacts through potential new Retailer leads that they see while out in the field or by getting referrals from existing Retailers · Strengthen brand awareness in the channel through merchandising, display maintenance · Must take measurements for custom Branding requests Skills and Requirements: · At least 2-5 years wireless retail sales or training experience (strongly preferred) · High school diploma or equivalent · Any combination of education and experience · Highly self-motivated and independent team player · Prior success meeting performance goals and requirements (prepaid wireless industry experience preferred) · Ability to take initiative and problem solve · Attention to detail and ability to multitask · Strong organizational skills with ability to coordinate and direct projects · Excellent verbal, written and presentation skills · Proficient in Microsoft Office, including Excel, Outlook, Word and PowerPoint · Ability to work non-traditional hours to participate in evening and weekend events · Valid driver’s license (at least 2 years in the US) · Bi-lingual Required - English & Hindu \nCompany Description About Lycamobile: The world’s largest international mobile virtual network operator with over 16 million customers with a new customer joining every two seconds. Lycamobile’s mission is to connect friends and family around the world. We aim to do this by offering low-cost, high-quality data and voice services across 24 countries. Lycatel LLC is an equal opportunity employer. We will not discriminate on the basis of race, color, gender, national origin, age, religion, creed, disability, veteran’s status, sexual orientation, gender identity or gender expression. About Lycamobile:\r\n\r\nThe world’s largest international mobile virtual network operator with over 16 million customers with a new customer joining every two seconds. Lycamobile’s mission is to connect friends and family around the world. We aim to do this by offering low-cost, high-quality data and voice services across 24 countries.\r\n\r\nLycatel LLC is an equal opportunity employer. We will not discriminate on the basis of race, color, gender, national origin, age, religion, creed, disability, veteran’s status, sexual orientation, gender identity or gender expression.

The AI infrastructure layer is mature. Automated Agent workflows are becoming commoditized. Large enterprises are "distilling" human labor- capturing physical and cognitive behavioral data to train embodied AI models, leading to a massive wave of layoffs and a crisis of individual identity. But where centralized corporations see a cost-cutting tool, we see the ultimate catalyst for the rise of Solopreneurs, Hyper-Individual IP, and the Sovereign Creator Economy. At TimeXmart, we are not building another generic wrapper. We are building an AI-native ecosystem that empowers individuals to reclaim their value, exchange skills, and scale personal IP matrices in an automated world. We are ~85% complete with our Stage 1 launch (way beyond a simple MVP). Founded in August 2025, our founding team (Cornell, NYU Stern, CMU alumni) has personally backed the company with over $100K. We have a robust proprietary Agent infrastructure, an end-to-end service model, and access to the industry’s most capable models. We have the tech, the infrastructure, and the capital commitment. Now, we need our Third Founder & Chief Executive Officer (CEO) to scale this vision to the world. • The Operator & Strategist: You have a proven track record of managing companies, scaling products, leading teams, or navigating early-stage fundraising ($0 to $1M+)., • The AI Native: You deeply understand the mechanics of AI, AI agents, AI-native services, and the shift from central databases to agentic ecosystems., • The Builder Mindset: You possess a founder's hacker spirit. You don't wait for permission; you execute, iterate, and win., • The IP Visionary: You understand how individual, company, and product IP strategies intersect in 2026., • The Operator: You have U.S. status/residency to facilitate core company operations, strategic business development, and U.S.-based investor relations., • Core Partner-Level Equity (True ownership and a seat at the table)., • Cash Salary Compensation structured to trigger immediately upon our first institutional funding round., • Real Decision-Making Power to shape the architecture, marketing, and commercialization of a next-gen tech ecosystem., • Demonstrated expertise in Management, Marketing, Finance, including budgeting, forecasting, capital allocation, or investor relations., • Strong Operations Management experience overseeing cross-functional teams, processes, and performance in a growing organization., • Proven ability in Business Planning and Strategic Planning, including setting long-term vision, defining objectives, and executing roadmaps., • Track record of success in Sales leadership, business development, and partnership growth in technology or platform-based businesses., • Experience leading early-stage or high-growth companies, preferably in AI, digital platforms, or marketplaces., • Inclusive leadership style with excellent communication, decision-making, and stakeholder management skills., • Ability to collaborate closely with core teams and board members., • Advanced degree in Business, Finance, Technology, or a related field is beneficial, or equivalent executive-level experience. #J-18808-Ljbffr

At Picnic, we’re reinventing the way employees experience lunch at work. By partnering with top local restaurants and batching hundreds of orders, we make it easy for companies to offer high-quality, individually packed meals, without fees or tips. Our mission is to create a seamless, affordable, and joyful lunch experience that benefits both employees and employers. About the role We're not looking for a traditional operator. We're looking for someone who becomes the owner of Picnic across the East Region. Picnic has scaled its group-delivery model, same prices as takeout, no fees, no tips, across every major U.S. city. The East Region spans New York, Boston, Toronto, Atlanta, Chicago, Denver, Houston, Dallas, and Austin. You'll build out the local team in each city (City Managers, Ops Managers, Growth Leads, Community Managers) and own the full P&L across sales, operations, and restaurant partnerships. You'll set GTM strategy, build restaurant and account relationships, and run marketing and logistics across nine cities, all while working closely with the broader Atoms leadership team. Think of yourself as an owner running a portfolio of markets, with Atoms behind you. What you'll do Set the strategy • Read competitor activity and customer preference across each city and turn it into a coherent GTM strategy for the region., • Decide where to invest, where to hold, and where to walk away, city by city. Build the relationships • Build and sustain a high-value network of C-suite office contacts and restaurateurs across all nine cities., • Become the person both sides trust to get things done, wherever you are in the region. Own the P&L • Run sales, operations, and restaurant partnerships as one connected business across the East Region., • Drive cost efficiency and be able to point to a concrete savings or margin win you delivered. Use data to move fast • Get comfortable with ambiguity and thrive with little guidance., • Use data to make decisions across markets, and look for ways to automate and simplify wherever you can. Make lunch fun • Bring creative, bold marketing instincts to the table., • Build engagement and make Picnic something people look forward to, in every city you run. Build the team • Hire, train, and inspire City Managers, Ops Managers, Growth Leads, and Community Managers across the region., • Take real fulfillment in developing the people who work for you. Who you are • A strategic, versatile problem solver who can operate across GTM, relationship building, execution, data, marketing, and team building at once, and do it across multiple markets simultaneously., • Someone who treats a region like their own business, not a set of territories to manage., • Comfortable building the playbook rather than waiting for one., • Genuinely passionate about food and about building things hands-on. What we’re looking for • 2 to 5 years at a top-tier consulting firm (McKinsey, BCG, Bain), a top-tier bank or PE firm, or an MBA from a leading business school., • 2 to 3 years of operating or entrepreneurial experience., • Previous P&L responsibility is a plus., • Previous food delivery, marketplace, or B2B experience., • Thrives in ambiguity, needs little guidance, and enjoys rolling up their sleeves., • Run a region: Own nine cities end to end and build the team, the playbook, and the results yourself., • Work with purpose: Help redefine how people experience lunch at work, for thousands of people across the East Coast and beyond., • Grow with Atoms: Join at the ground floor of a region that’s about to scale, with the backing of a fast-growing, mission-driven company. What else you need to know This role is based in our New York office location. As a company driven by innovation and continuous change, close collaboration is essential. We’re constantly reimagining our industry, creating new products, and refining our processes, and we do our best work together. That’s why all of our office-based teams work onsite, five days a week. The base salary range for this role is $223,000 - $280,000 per year. Actual compensation will be determined on an individual basis and may vary depending on experience, skills, and qualifications. Base salary is just one part of your total rewards package. You may also be eligible for equity awards and an annual performance-based bonus. Benefits Summary (USA Full-Time Exempt Employees): • Medical, dental, and vision insurance (multiple plans, incl. HSA options)., • Company-paid life and disability insurance (short- and long-term)., • Voluntary insurance: accident, critical illness, hospital indemnity., • Optional supplemental life insurance for self, spouse, and children., • 401(k)., • Health Savings Account (HSA), • Flexible Spending Accounts (Healthcare, Dependent Care, Commuter), • Discretionary vacation days, • 8 paid holidays per year Benefits are subject to change at the company's discretion. Atoms accepts applications on an ongoing basis. Ready to join us as we serve those who serve others? #LI-Onsite #J-18808-Ljbffr

At Picnic, we’re reinventing the way employees experience lunch at work. By partnering with top local restaurants and batching hundreds of orders, we make it easy for companies to offer high-quality, individually packed meals, without fees or tips. Our mission is to create a seamless, affordable, and joyful lunch experience that benefits both employees and employers. We're not looking for a traditional operator. We're looking for someone who becomes the owner of Picnic across the East Region. Picnic has scaled its group-delivery model, same prices as takeout, no fees, no tips, across every major U.S. city. The East Region spans New York, Boston, Toronto, Atlanta, Chicago, Denver, Houston, Dallas, and Austin. You'll build out the local team in each city (City Managers, Ops Managers, Growth Leads, Community Managers) and own the full P&L across sales, operations, and restaurant partnerships. You’ll set GTM strategy, build restaurant and account relationships, and run marketing and logistics across nine cities, all while working closely with the broader Atoms leadership team. Think of yourself as an owner running a portfolio of markets, with Atoms behind you. Set the strategy • Read competitor activity and customer preference across each city and turn it into a coherent GTM strategy for the region., • Decide where to invest, where to hold, and where to walk away, city by city. Build the relationships • Build and sustain a high-value network of C-suite office contacts and restaurateurs across all nine cities., • Become the person both sides trust to get things done, wherever you are in the region. Own the P&L • Run sales, operations, and restaurant partnerships as one connected business across the East Region., • Drive cost efficiency and be able to point to a concrete savings or margin win you delivered. Use data to move fast • Get comfortable with ambiguity and thrive with little guidance., • Use data to make decisions across markets, and look for ways to automate and simplify wherever you can. Make lunch fun • Bring creative, bold marketing instincts to the table., • Build engagement and make Picnic something people look forward to, in every city you run. Build the team • Hire, train, and inspire City Managers, Ops Managers, Growth Leads, and Community Managers across the region., • Take real fulfillment in developing the people who work for you., • A strategic, versatile problem solver who can operate across GTM, relationship building, execution, data, marketing, and team building at once, and do it across multiple markets simultaneously., • Someone who treats a region like their own business, not a set of territories to manage., • Comfortable building the playbook rather than waiting for one., • Genuinely passionate about food and about building things hands-on., • 2 to 5 years at a top-tier consulting firm (McKinsey, BCG, Bain), a top-tier bank or PE firm, or an MBA from a leading business school., • 2 to 3 years of operating or entrepreneurial experience., • Previous P&L responsibility is a plus., • People management experience., • Previous food delivery, marketplace, or B2B experience., • Thrives in ambiguity, needs little guidance, and enjoys rolling up their sleeves., • Run a region: Own nine cities end to end and build the team, the playbook, and the results yourself., • Work with purpose: Help redefine how people experience lunch at work, for thousands of people across the East Coast and beyond., • Grow with Atoms: Join at the ground floor of a region that's about to scale, with the backing of a fast-growing, mission-driven company. This role is based in our New York office location. As a company driven by innovation and continuous change, close collaboration is essential. We’re constantly reimagining our industry, creating new products, and refining our processes, and we do our best work together. That’s why all of our office-based teams work onsite, five days a week. The base salary range for this role is $223,000 - $280,000 per year. Actual compensation will be determined on an individual basis and may vary depending on experience, skills, and qualifications. Base salary is just one part of your total rewards package. You may also be eligible for equity awards and an annual performance-based bonus. • Medical, dental, and vision insurance (multiple plans, incl. HSA options)., • Company-paid life and disability insurance (short- and long-term)., • Voluntary insurance: accident, critical illness, hospital indemnity., • Optional supplemental life insurance for self, spouse, and children., • Pet insurance discount., • 401(k)., • Health Savings Account (HSA), • Flexible Spending Accounts (Healthcare, Dependent Care, Commuter), • Time Off policies:, • Discretionary vacation days, • 8 paid holidays per year, • Paid sick time, • Paid Bereavement leave, • Paid Parental Leave Benefits are subject to change at the company's discretion. #J-18808-Ljbffr

At Picnic, we’re reinventing the way employees experience lunch at work. By partnering with top local restaurants and batching hundreds of orders, we make it easy for companies to offer high-quality, individually packed meals, without fees or tips. Our mission is to create a seamless, affordable, and joyful lunch experience that benefits both employees and employers. We're not looking for a traditional operator. We're looking for someone who becomes the owner of Picnic across the East Region. Picnic has scaled its group-delivery model, same prices as takeout, no fees, no tips, across every major U.S. city. The East Region spans New York, Boston, Toronto, Atlanta, Chicago, Denver, Houston, Dallas, and Austin. You'll build out the local team in each city (City Managers, Ops Managers, Growth Leads, Community Managers) and own the full P&L across sales, operations, and restaurant partnerships. You’ll set GTM strategy, build restaurant and account relationships, and run marketing and logistics across nine cities, all while working closely with the broader Atoms leadership team. Think of yourself as an owner running a portfolio of markets, with Atoms behind you. Set the strategy • Read competitor activity and customer preference across each city and turn it into a coherent GTM strategy for the region., • Decide where to invest, where to hold, and where to walk away, city by city. Build the relationships • Build and sustain a high-value network of C-suite office contacts and restaurateurs across all nine cities., • Become the person both sides trust to get things done, wherever you are in the region. Own the P&L • Run sales, operations, and restaurant partnerships as one connected business across the East Region., • Drive cost efficiency and be able to point to a concrete savings or margin win you delivered. Use data to move fast • Get comfortable with ambiguity and thrive with little guidance., • Use data to make decisions across markets, and look for ways to automate and simplify wherever you can. Make lunch fun • Bring creative, bold marketing instincts to the table., • Build engagement and make Picnic something people look forward to, in every city you run. Build the team • Hire, train, and inspire City Managers, Ops Managers, Growth Leads, and Community Managers across the region., • Take real fulfillment in developing the people who work for you., • A strategic, versatile problem solver who can operate across GTM, relationship building, execution, data, marketing, and team building at once, and do it across multiple markets simultaneously., • Someone who treats a region like their own business, not a set of territories to manage., • Comfortable building the playbook rather than waiting for one., • Genuinely passionate about food and about building things hands-on., • 2 to 5 years at a top-tier consulting firm (McKinsey, BCG, Bain), a top-tier bank or PE firm, or an MBA from a leading business school., • 2 to 3 years of operating or entrepreneurial experience., • Previous P&L responsibility is a plus., • People management experience., • Previous food delivery, marketplace, or B2B experience., • Thrives in ambiguity, needs little guidance, and enjoys rolling up their sleeves., • Run a region: Own nine cities end to end and build the team, the playbook, and the results yourself., • Work with purpose: Help redefine how people experience lunch at work, for thousands of people across the East Coast and beyond., • Grow with Atoms: Join at the ground floor of a region that’s about to scale, with the backing of a fast-growing, mission-driven company. This role is based in our New York office location. As a company driven by innovation and continuous change, close collaboration is essential. We’re constantly reimagining our industry, creating new products, and refining our processes, and we do our best work together. That’s why all of our office-based teams work onsite, five days a week. The base salary range for this role is $223,000 - $280,000 per year. Actual compensation will be determined on an individual basis and may vary depending on experience, skills, and qualifications. Base salary is just one part of your total rewards package. You may also be eligible for equity awards and an annual performance-based bonus. • Medical, dental, and vision insurance (multiple plans, incl. HSA options)., • Company-paid life and disability insurance (short- and long-term)., • Voluntary insurance: accident, critical illness, hospital indemnity., • Optional supplemental life insurance for self, spouse, and children., • Pet insurance discount., • 401(k)., • Health Savings Account (HSA), • Flexible Spending Accounts (Healthcare, Dependent Care, Commuter), • Time Off policies:, • Discretionary vacation days, • 8 paid holidays per year, • Paid sick time, • Paid Bereavement leave, • Paid Parental Leave Benefits are subject to change at the company's discretion. Atoms accepts applications on an ongoing basis. #LI-Onsite #J-18808-Ljbffr

Job Description The iconic Elysee New York is seeking an experienced Hotel Front Office Manager. This is a rare opportunity for a proven luxury hospitality leader to shape the re-emergence of a legendary New York hotel and help define the next chapter of an intimate, highly personalized luxury boutique brand. Elysee New York is seeking an experienced, highly visible, and service-driven Front Office Manager to lead all Front Office operations and help shape the guest experience for one of New York City’s most distinctive luxury boutique hotels. Reporting to the Director of Operations, the Front Office Manager oversees Front Desk, Bell Services, guest services, and overnight operations, ensuring every arrival, stay, and departure reflects Elysee New York’s luxury standards and LQA expectations. This position serves as the primary operational leader during afternoon and evening shifts, with schedules typically beginning at 2:00 PM. At Crescent Hotels & Resorts, we are a team of hospitality professionals that are deeply connected to & proud of the exceptional experiences we provide for our guests. More than that, we know our Associates are the shining stars of what we do! We understand what it takes to be a part of something great. We will encourage you to bring your true self to work every day, we will celebrate you and we will cheer you on as you shine bright in your career journey. Whether it be our health & wellness programs, best in class learning and development or our travel discounts that ‘feed your inner explorer’, we work hard to create and deliver on what YOU need. We are ready for you to start your journey with us where You Belong. We Care. Shine Bright. We are committed to providing you with: • Highly competitive annual salary based on experience, • Possible bonus eligibility, • An exceptional benefit plan for eligible associates & your family members, • 401K matching program for eligible associates, • Flexible scheduling to allow you to focus on what is important to you, • Discounts with our Crescent managed properties in North America for you & your family members ESSENTIAL JOB FUNCTIONS: Leadership & Team Management • Lead, inspire, and develop a high-performing Front Office team, including supervisors, Guest Service Agents, Bell Persons, and PBX Operator., • Recruit, train, and mentor team members, fostering a culture of accountability, engagement, and continuous improvement, • Conduct regular performance evaluations and provide coaching and feedback, • Ensure proper staffing levels and scheduling aligned with occupancy and business needsOperations & Quality Assurance, • Respond to guest’s special requests, needs, problems, issues and concerns and accommodate groups to ensure optimal levels of guest satisfaction and repeat business., • Implement company programs and supervise the daily operations of the Front Office to comply with SOPS and LSOPs, maximize revenues, and motivate associates to ensure an optimal level of quality service and hospitality are provided to the hotel customers.Guest Experience, • Champion a guest-first mindset, ensuring every space reflects comfort, elegance, and meticulous attention to detail, • Address guest requests, concerns, and special preferences promptly and professionally, • Collaborate with Housekeeping and other departments to ensure seamless guest experiencesFinancial & Administrative Management, • Manage departmental budgets, labor costs, and productivity metrics, • Analyze performance data and implement strategies for operational efficiency, • Maintain accurate records, reports, and compliance documentationHealth, Safety & Compliance, • Ensure compliance with all health, safety, and sanitation regulations, • Maintain knowledge of OSHA standards and safe work practices, • Lead sustainability initiatives, including waste reduction and eco-friendly practicesREQUIRED SKILLS/ABILITIES:, • A minimum of 2 years of experience at a Luxury NYC Market Hotel is required, • Hotel and Gaming Trades Council, AFL-CIO experience is preferred, • Must have experience working with unionized teams and knowledge/understanding of union contracts, • Must have experience with LQA / Forbes standards, • Proven leadership, communication, and organizational skills, • Financial acumen with experience managing budgets and labor costs, • High attention to detail and commitment to excellence, • Ability to work flexible schedules, including weekends and holidays, • Bilingual or multilingual abilities are preferred, • Strong knowledge of luxury service standards and hotel operations, • Proficiency in hotel management systems

At Picnic, we’re reinventing the way employees experience lunch at work. By partnering with top local restaurants and batching hundreds of orders, we make it easy for companies to offer high-quality, individually packed meals, without fees or tips. Our mission is to create a seamless, affordable, and joyful lunch experience that benefits both employees and employers. We're not looking for a traditional operator. We're looking for someone who becomes the owner of Picnic across the East Region. Picnic has scaled its group-delivery model, same prices as takeout, no fees, no tips, across every major U.S. city. The East Region spans New York, Boston, Toronto, Atlanta, Chicago, Denver, Houston, Dallas, and Austin. You'll build out the local team in each city (City Managers, Ops Managers, Growth Leads, Community Managers) and own the full P&L across sales, operations, and restaurant partnerships. You’ll set GTM strategy, build restaurant and account relationships, and run marketing and logistics across nine cities, all while working closely with the broader Atoms leadership team. Think of yourself as an owner running a portfolio of markets, with Atoms behind you. Set the strategy • Read competitor activity and customer preference across each city and turn it into a coherent GTM strategy for the region., • Decide where to invest, where to hold, and where to walk away, city by city. Build the relationships • Build and sustain a high-value network of C-suite office contacts and restaurateurs across all nine cities., • Become the person both sides trust to get things done, wherever you are in the region. Own the P&L • Run sales, operations, and restaurant partnerships as one connected business across the East Region., • Drive cost efficiency and be able to point to a concrete savings or margin win you delivered. Use data to move fast • Get comfortable with ambiguity and thrive with little guidance., • Use data to make decisions across markets, and look for ways to automate and simplify wherever you can. Make lunch fun • Bring creative, bold marketing instincts to the table., • Build engagement and make Picnic something people look forward to, in every city you run. Build the team • Hire, train, and inspire City Managers, Ops Managers, Growth Leads, and Community Managers across the region., • Take real fulfillment in developing the people who work for you., • A strategic, versatile problem solver who can operate across GTM, relationship building, execution, data, marketing, and team building at once, and do it across multiple markets simultaneously., • Someone who treats a region like their own business, not a set of territories to manage., • Comfortable building the playbook rather than waiting for one., • Genuinely passionate about food and about building things hands-on., • 2 to 5 years at a top-tier consulting firm (McKinsey, BCG, Bain), a top-tier bank or PE firm, or an MBA from a leading business school., • 2 to 3 years of operating or entrepreneurial experience., • Previous P&L responsibility is a plus., • People management experience., • Previous food delivery, marketplace, or B2B experience., • Thrives in ambiguity, needs little guidance, and enjoys rolling up their sleeves., • Run a region: Own nine cities end to end and build the team, the playbook, and the results yourself., • Work with purpose: Help redefine how people experience lunch at work, for thousands of people across the East Coast and beyond., • Grow with Atoms: Join at the ground floor of a region that’s about to scale, with the backing of a fast-growing, mission-driven company. This role is based in our New York office location. As a company driven by innovation and continuous change, close collaboration is essential. We’re constantly reimagining our industry, creating new products, and refining our processes, and we do our best work together. That’s why all of our office-based teams work onsite, five days a week. The base salary range for this role is $223,000 - $280,000 per year. Actual compensation will be determined on an individual basis and may vary depending on experience, skills, and qualifications. Base salary is just one part of your total rewards package. You may also be eligible for equity awards and an annual performance-based bonus. • Medical, dental, and vision insurance (multiple plans, incl. HSA options)., • Company-paid life and disability insurance (short- and long-term)., • Voluntary insurance: accident, critical illness, hospital indemnity., • Optional supplemental life insurance for self, spouse, and children., • Pet insurance discount., • 401(k)., • Health Savings Account (HSA), • Flexible Spending Accounts (Healthcare, Dependent Care, Commuter), • Time Off policies:, • Discretionary vacation days, • 8 paid holidays per year, • Paid sick time, • Paid Bereavement leave, • Paid Parental Leave Benefits are subject to change at the company's discretion. Atoms accepts applications on an ongoing basis. #LI-Onsite #J-18808-Ljbffr