Trabajos lift technician en Los Angeles, CaliforniaCrear alertas

Job DescriptionDescription: TRAILER TECHNICIAN Department: Fleet & Maintenance Location: Long Beach Shop – Long Beach, CA Office Hours/Days: 0700 - 1630 (M-F) Classification: Full-Time, Non-Exempt Reports To Shop Manager Position Summary Ecology Auto Parts Inc. is seeking a skilled and dependable Trailer Technician to join our Fleet & Maintenance team at the Long Beach Shop. The Trailer Technician will be responsible for conducting inspections, performing preventive maintenance, and executing repair work on our fleet of trailers to ensure operational safety, compliance, and efficiency. This hands-on role demands mechanical expertise, a keen eye for detail, and a commitment to maintaining high safety and quality standards. Responsibilities To perform this job successfully, you must be able to execute each essential duty satisfactorily. Other minor duties may be assigned. • Conduct thorough inspections of trailers to identify and diagnose mechanical and structural issues., • Perform repairs on trailer components including brakes, axles, lighting systems, suspension, flooring, doors, and air systems., • Execute preventive maintenance services per company and DOT standards to ensure ongoing compliance and functionality., • Replace worn or damaged parts such as wheel hubs, landing gear, lights, and mud flaps., • Maintain accurate service records, including parts used and labor performed, using maintenance software systems., • Operate shop tools and diagnostic equipment safely and effectively., • Maintain cleanliness and organization of the work area, tools, and equipment., • Assist in the coordination of parts inventory and restocking., • Collaborate with the Road Service and Diesel Technician teams as needed for shared fleet repairs and diagnostics., • Weld frames, Hangers, Landing Gears, walls, floors,, • Troubleshoot and repair ABS, Electrical shortsRequirements: Qualifications/Knowledge/Critical Skills · Minimum of three (3) years of experience in trailer maintenance and repair or a related mechanical role. · High school diploma or equivalent. Technical certification or training in diesel or trailer repair is preferred. · Familiarity with DOT safety regulations and trailer inspection requirements. · Strong mechanical aptitude and working knowledge of air brake systems, electrical wiring, and welding techniques. · Ability to diagnose issues and recommend practical repair solutions independently. · Effective time management and organizational skills. · Ability to work in a fast-paced environment and meet repair deadlines. · Must be legally eligible to work in the United States. · Must pass pre-employment drug screening, physical, and background check. Physical Demands/Environmental Factors · Ability to perform physical requirements of the position with or without reasonable accommodations. · Frequently required to stand, bend, crouch, lift, pull, and push during trailer inspections and repairs. · Ability to lift up to 75 pounds and work with heavy-duty tools and parts. · Exposure to outdoor environments and varying weather conditions. · Must follow all shop safety standards and wear appropriate PPE. Compensation The Trailer Technician position offers a competitive hourly rate ranging from $20.00 to $25.00 per hour (DOE). Ecology Auto Parts Inc. also offers a comprehensive benefits package that includes medical, dental, and vision coverage, a 401(k)-retirement plan with employer matching, paid time off, and life insurance. Final compensation will be based on relevant experience, skills, and qualifications, reflecting our commitment to providing a rewarding and competitive remuneration to attract top talent in the industry. PLEASE NOTE: This job description is not exhaustive and is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Ecology Auto Parts Inc. is committed to providing a workplace and culture of respect, diversity, equity, inclusion, and belonging. We are dedicated to ensuring equal employment opportunity without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. Should you have a disability or specific needs requiring accommodation, please inform us. Thank you for your interest in opportunities with Ecology Auto Parts, Inc. We appreciate the enthusiasm and professionalism demonstrated by individuals seeking to join our team. Please be advised that Ecology Auto Parts, Inc. does not engage with or entertain solicitations from third-party recruiting firms for our hiring needs. We have a dedicated internal recruitment team managing our talent acquisition process. We kindly request that third-party recruitment firms refrain from submitting candidates for our open positions. Ecology Auto Parts, Inc. will not consider or entertain candidates represented by headhunter agencies for our current requisitions. Our commitment to fair and equitable hiring practices includes working directly with candidates who apply through our official channels. We believe in fostering a transparent and direct relationship with potential team members. We appreciate your understanding and compliance with this policy. If you are interested in joining Ecology Auto Parts, Inc., please visit our official careers page here: EAP, Inc. | Career Center for a list of our current job opportunities and application instructions. Acknowledgement Employee signature below constitutes employee's understanding of the requirements, essential functions and duties of the position. Candidate/Employee Name (Print): Candidate/Employee Signature: Date:

Job DescriptionPAPE’ RENTS – CITY OF INDUSTRY, CA HEAVY EQUIPMENT RENTAL SHOP TECHNICIAN / MECHANIC: Do you love working on equipment and turning wrenches? Are you looking to grow your skills as a mechanic? Are you looking for not just another job, but a career? If you answered yes to these questions, we want to hear from you! Pape’ Rents is seeking a Rental Shop Technician to join their team in City of Industry. At Pape’, you can count on us to invest heavily in your Technician career through training, resources, and support. We want to see you grow your skill set and experience, and in turn, provide excellent compensation, work-life balance, and benefits for you and your family. Come join our team! WHAT YOU’LL DO: As a Rental Shop Technician, you will work on material handling and construction equipment ensuring equipment repairs are done accurately and timely, all in an effort to maximize our equipment uptime and support our customers and their rental equipment needs. Every day, picture yourself working alongside other trained Technicians in a shop that has all the support and resources you need to perform top-notch work on equipment. WHAT YOU NEED: • Knowledge of JLG and Genie and other AWP Equipment with the ability to diagnose and troubleshoot; strong mechanical aptitude. Aerial experience is also preferred!, • Experience with electronic and hydraulic repairs; diesel and gas engine repair, • Must be comfortable working at heights, • Basic computer knowledge., • Excellent communication and customer relations skills., • Must provide own tools., • Must be able to push, pull and/or lift up to 75lbs, • Driver's license with a good driving record Compensation: $33.80-40/hr (Depending on Experience) Why work for Pape’: • Competitive pay based on your skills, training, and experience level., • Outstanding benefits including – 401(k) & Roth 401(k) Retirement Plans with Company Match; Medical, Dental, Vision and Prescription Insurance; Flexible Spending Accounts (Flex Plans); Life Insurance; Short- and Long-Term Disability Insurance; Employee Assistance Program; Online and Instructor-Led Training; Tuition Reimbursement for Training Programs., • Progressive Vacation Plans, Sick Leave & Paid Holidays – Members receive 80 hours of vacation (First year is prorated for new hires based on start date), 40 hours of Sick Leave, and 7 paid holidays each year. Pape’ vacation plans also have tiers based on your seniority, so as your seniority grows, your vacation time off does as well., • Advancement – Pape’ is a dynamic, growth-oriented organization with a focus on promoting from within., • Stability and reputation — Pape’ is a family-owned, fourth-generation company with over 160 locations, over 4,000 members and 85 plus years of experience. Pape’ is known for their stability, honesty and integrity., • Equipment – Pape’ has the largest equipment inventory in the West and an unparalleled parts inventory!, • Employee impact – Enjoy an open-door policy where your voice will be heard and your opinions will matter., • Training – You will be provided with training and mentoring to prepare you for your role and continued learning to grow your skills. The Pape’ Group maintains a drug-free workplace and as such, requires candidates to successfully pass a pre-employment drug test.

Job DescriptionDescription: DIAGNOSTIC DIESEL TECHNICIAN Department: Fleet & Maintenance Location: Long Beach, CA Office Hours/Days: 0700 - 1630 (M-F) Classification: Full-Time, Non-Exempt Reports To Shop Manager Position Summary Ecology Auto Parts, Inc. is seeking a highly skilled and tech-savvy Diagnostic Diesel Technician to join our dynamic Fleet & Maintenance team. This position requires advanced knowledge in diesel mechanics paired with modern diagnostic expertise, specifically with Cummins and Paccar engine platforms. The ideal candidate will bring a deep understanding of electronic diagnostic software, data analysis, and fault resolution to ensure our fleet is operating at peak performance. Working under the direction of the Shop Manager, the selected candidate will serve as the go-to technician for engine diagnostics, root cause analysis, and smart repair strategies, supporting operations at either our Long Beach or Santa Fe Springs locations. Responsibilities • Diagnose and repair engine issues using OEM diagnostic platforms (Cummins Insite, Paccar DAVIE4, etc.), • Conduct electrical, emission system, and sensor diagnostics across a variety of heavy-duty diesel trucks, • Interpret fault codes and performance data, update ECU software, and calibrate sensors as needed, • Perform advanced preventative maintenance and major component overhauls when necessary, • Troubleshoot aftertreatment systems, DEF issues, DPF regens, and other emissions-related concerns, • Document all repair activities in fleet maintenance software systems with accuracy and clarity, • Assist in training junior mechanics on electronic diagnostics and standard repair techniques, • Provide input on fleet condition and recommend strategies to reduce downtime and improve efficiency, • Maintain cleanliness, organization, and safety of assigned workspaces in accordance with OSHA and company standards Requirements: Qualifications/Knowledge/Critical Skills • Minimum 3 years of diesel mechanic experience with advanced troubleshooting abilities, • Proven experience with Cummins and Paccar engine diagnostics, software use, and repairs, • High School Diploma or equivalent (required); technical certification in Diesel Technology (preferred), • Valid Driver’s License and eligibility to work in the U.S., • Strong proficiency in electronic diagnostic tools, laptops, and OEM software systems, • Ability to read and interpret wiring diagrams, schematics, and technical service bulletins, • Highly organized, self-motivated, and able to prioritize tasks in a fast-paced environment, • Capable of lifting 50–75 pounds, bending, standing, and working in physically demanding conditions, • Commitment to safe practices and compliance with all federal and state regulations Physical Demands/Environmental Factors • While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear, • Frequently required to stand and walk, • Must frequently lift and/or move up to 75 pounds, • Requires regular lifting, pulling, and physical manipulation of tools and equipment, • Exposure to varying weather conditions, vehicle fluids, and noisy environments, • Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus, • Some travel required Compensation The Diagnostic Diesel Technician role offers a competitive hourly wage range of $25 to $35 per hour, based on experience and diagnostic proficiency. In addition to the financial components, we provide a comprehensive benefits package, including medical, dental, and vision insurance, a 401k plan with employer matching, generous paid time off, and life insurance coverage. The final compensation will be contingent upon the candidate's relevant experience, qualifications, and skills, reflecting our commitment to providing a rewarding and competitive remuneration to attract top talent in the industry. PLEASE NOTE: This job description is not exhaustive and is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Ecology Auto Parts Inc. is committed to providing a workplace and culture of respect, diversity, equity, inclusion, and belonging. We are dedicated to ensuring equal employment opportunity without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. Should you have a disability or specific needs requiring accommodation, please inform us. Thank you for your interest in opportunities with Ecology Auto Parts, Inc. We appreciate the enthusiasm and professionalism demonstrated by individuals seeking to join our team. Please be advised that Ecology Auto Parts, Inc. does not engage with or entertain solicitations from third-party recruiting firms for our hiring needs. We have a dedicated internal recruitment team managing our talent acquisition process. We kindly request that third-party recruitment firms refrain from submitting candidates for our open positions. Ecology Auto Parts, Inc. will not consider or entertain candidates represented by headhunter agencies for our current requisitions. Our commitment to fair and equitable hiring practices includes working directly with candidates who apply through our official channels. We believe in fostering a transparent and direct relationship with potential team members. We appreciate your understanding and compliance with this policy. If you are interested in joining Ecology Auto Parts, Inc., please visit our official careers page here: EAP, Inc. | Career Center for a list of our current job opportunities and application instructions. Acknowledgement Employee signature below constitutes employee's understanding of the requirements, essential functions and duties of the position. Candidate/Employee Name (Print): Candidate/Employee Signature: Date:

Job DescriptionDescription: SUMMARY: Emergency Vehicle Group, Inc. is a leading emergency vehicle dealer and service center for fire apparatus, ambulances, command and specialty vehicles that is adding to our service operations. We are seeking highly skilled heavy truck mechanic to work on fire apparatus, ambulances and other emergency vehicles. Experience with air brakes, heavy truck components, hydraulics, water pumps, and aerial devices, complex electrical systems is expected. Please submit resume, employment and salary history. Qualified Applicants Only. ESSENTIAL JOB FUNCTIONS: • Repair and maintain various types of emergency vehicles, such as pumpers, aerials, ambulances and other vehicles., • Perform preventative maintenance and inspections on heavy truck chassis and fire components., • Major repairs on fire pumps, aerials, hydraulic systems, air brakes and electrical systems., • Travel to customers sites for repairs as needed., • Perform work as directed by Service Manager, • Other duties as assigned and can vary daily, • Ensures shop cleanliness and maintenance on a regular basis., • Processes and tracks repair orders., • Performs road tests on vehicles in order to assure roper operating levels., • Operates computer to document repair work and maintenance on a daily basis., • Monitors and advises all safety related issues related the shop area, vehicles and wherever maintenance is being performed., • Available to perform emergency repair work after hours including nights, weekends and holidays.Requirements:, • Reads and follows simple to complicated instructions, schematics and other information contained in repair manuals or the diagnosis and repair of fire and EMS vehicles and equipment., • Performs calculations and works with numbers to solve problems., • Reads and understands reference books and complicated procedures and manuals., • Pays attention to detail while ensuring crews observe safety precautions., • Knowledge of safety hazards and precautions., • Appropriately records repairs and parts used. PREFERRED EDUCATION, EXPERIENCE AND CERTIFICATIONS: • High School Diploma or GED and 2+ year mechanical repair and maintenance work or equivalent combination of education and experience., • Class B or A CDL Driver’s License, • ASE Mechanic certification preferred, • Must obtain Emergency Vehicle Technician (EVT)certification within 1 year of hire date., • Fabrication and Welding Experience a Plus but not required. Experience with Mig, Tig welding and any welding certification as well as a background in metal fabrication., • Must pass pre-employment drug screen, physical, criminal background and MVR check. ENVIRONMENTAL FACTORS AND CONDITIONS / PHYSICAL REQUIREMENTS: • Work is performed in an automotive repair shop and on customer’s sites., • May be subject to bending, twisting, reaching, kneeling and lifting such as retrieving and replacing materials, supplies and inventory or when performing preventative maintenance and repair of vehicles and heavy equipment., • May be subject to exposure to extreme weather conditions, hazardous chemicals and fumes common to automotive repair shops., • Must be able to lift up to 50 pounds. EQUIPMENT AND TOOLS UTILIZED: • Operates various emergency vehicles and equipment on an as-needed basis (for testing purposes), • Operates volt ohm meter, ampmeter, pressure gauges, nozzle and valve repair kits, calibrating tools for engines, rakes, micrometers and dial calipers, welders, grinders, torch, brazing rod, precision gauges, inspection and diagnostic equipment., • Must have own tools.

Job Description Overview CoolSys solves the most complex challenges in refrigeration, air conditioning, heating, engineering, and energy management. With over 3,700 associates nationwide, we deliver tailored solutions to help businesses cut costs, improve equipment performance, and reduce emissions. Our services include HVAC and refrigeration equipment sourcing, installation, repair, maintenance, monitoring, and optimization. We also offer engineering design, energy resilience and consumption optimization, asset recycling, and seamless multi-site rollouts across states. CoolSys serves over 45,000 customer locations in industries like retail, food service, commercial, data centers, industrial, and pharmaceuticals. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! We understand that hiring great people is the foundation of everything we do. Our employee benefits packages include: • Competitive pay: $25-$38/HR - DOE!, • Benefits: Medical, Dental, Vision and Prescription coverage., • Paid vacation, holidays, and floating holiday., • 401(K), • Company sponsored life insurance, as well as optional AD&D, short and long-term disability., • Tuition reimbursement., • Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more., • Pet Insurance., • Legal Plan, and ID Theft Protection. Responsibilities JOB SUMMARY: The Dispatcher 2 is responsible for overseeing the daily coordination and distribution of work to Technicians, ensuring efficient service delivery, and supporting dispatch team operations. This role acts as a key point of contact between dispatchers, Service Managers, and Technicians- providing guidance, resolving escalations, and driving adherence to service standards. The Dispatcher 2 plays a pivotal role in optimizing resource allocation, maintaining customer satisfaction, and ensuring seamless operations in line with company policies and procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES • Independently evaluate and prioritize service requests, including backlog, considering urgency, customer impact, SLA requirements, and resource constraints., • Use independent discretion in directing service calls to technicians, balancing their skills, workloads, geographic locations, and availability to optimize efficiency., • Collaborate with Service Managers and dispatch team members to resolve escalations and ensure alignment of resources with operational needs., • Ensure compliance with service level agreements (SLAs) and take proactive steps to address potential delays or missed commitments., • Serve as a point of escalation for complex or high-priority service issues, providing solutions to ensure timely resolution., • Generate and review operational performance reports, identifying opportunities for improvement and recommending actionable solutions., • Conduct regular reviews of incomplete service calls, ensuring timely follow-up and resolution., • Assist in maintaining and updating the “on-call” schedules and verifying appropriate coverage for all service areas., • Support the scheduling and completion of preventative maintenance tasks in collaboration with Service Managers., • Develop a thorough understanding of market geography, technician expertise, and resource availability to enhance dispatch efficiency., • Provide mentorship and training to dispatch team members, ensuring consistent application of best practices and policies., • Perform additional tasks and responsibilities as assigned to support the team and operations. Qualifications JOB REQUIREMENTS • High school diploma or equivalent experience., • Associate’s degree or technical certification in a related field, preferred., • Technical (refrigeration) expertise, preferred. Work Experience / Skills • 3–5 years of experience in dispatch operations, customer service, or a related field, preferably in a technical service environment., • Proven ability to prioritize and manage multiple tasks in a fast-paced environment., • Strong organizational skills and attention to detail for accurate scheduling and reporting., • Excellent communication skills, both written and verbal, with the ability to maintain professional relationships with customers and internal teams., • Strong problem-solving skills and the ability to remain calm under pressure., • Demonstrated ability to work collaboratively in a team environment and provide mentorship to peers., • Flexibility to adapt to changing priorities and work occasional evenings, weekends, or on-call shifts as needed., • Ability to understand and follow all company policies and procedures and all applicable State and Federal laws., • Proficiency in using typical business tools including E-Mail, Word, Excel, etc. PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment This job operates in a clean, well-lit and climate-controlled professional office environment with minimal physical hazards and noise. This role routinely uses standard office equipment such as computers, phones, printers, etc. Physical Demands While performing the duties of this job, the employee is regularly required to stand, sit, walk, talk, hear, and use hands and fingers to operate office equipment. The employee is occasionally required to reach, stoop and kneel. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and color vision.

Job Description Job Summary: Power Trip Rentals is seeking a detail-oriented, dependable Heavy Equipment Mechanic – Shop & Field Technician to join our growing team! This role is responsible for inspecting, diagnosing, repairing, and maintaining heavy construction equipment both in the shop and at job sites. Equipment includes diesel engines, hydraulic systems, aerial work platforms, skid steers, and other specialized rental machinery. This position requires strong mechanical expertise, problem-solving skills, and the ability to work independently in the field. If you are passionate about equipment maintenance and enjoy hands-on, on-site repair work, we want to hear from you! Key Responsibilities: • Inspecting, analyzing, and troubleshooting heavy construction equipment and systems., • Performing diagnostics and complex repairs on diesel engines, hydraulics, and electrical systems., • Reading and interpreting equipment schematics, repair manuals, and diagnostic codes., • Performing preventative maintenance to ensure reliability and safety of rental equipment., • Sourcing and replacing faulty components, parts, and systems., • Fabricating or modifying equipment components when necessary., • Documenting repairs, maintenance records, and safety compliance reports., • Providing accurate time and material cost estimates before performing work., • Liaising with suppliers and clients to ensure timely service and repairs., • Traveling to job sites to repair/service equipment in the field. What You Bring to the Team: • High school diploma or GED required; trade school or equivalent training preferred., • 3-5 years Experience working with diesel engines, heavy machinery, and hydraulic/electrical systems., • Ability to troubleshoot and repair equipment independently in the field., • Must possess a valid driver’s license and clean driving record., • Ability to read and interpret technical manuals, schematics, and diagnostic codes., • Strong mathematical and problem-solving skills., • Proficiency in MS Office (for logging service reports and estimates)., • Ability to lift 50 lbs or more and work in various outdoor conditions. What We Offer: • Competitive hourly wage based on experience and qualifications., • Comprehensive benefits package, including:, • Health, dental, and vision coverage., • Retirement plan with employer contributions., • Paid vacation and sick days., • Safety boot reimbursement, • Career development opportunities – we promote from within!, • Pathways to shop foreman, service manager, and operational leadership roles.

Job DescriptionJob Summary: Power Trip Rentals is seeking a dependable, hands-on Truck / Shop Mechanic to join our dedicated team! In this role, you’ll be responsible for maintaining, diagnosing, and repairing our fleet of trucks and heavy equipment to ensure safety, performance, and reliability. Work will take place both in our shop and occasionally in the field. This is a great opportunity for a skilled technician who takes pride in their work and thrives in a fast-paced environment. If you're looking to join a team that values quality work and safety, we want to hear from you! Key Responsibilities: Diagnose and perform emergency repairs and scheduled maintenance on company trucks and equipment Conduct 90-day and annual DOT inspections Use company-provided laptop and diagnostic software to troubleshoot and service medium- and heavy-duty trucks Replace, repair, and install mechanical components, including hydraulic, pneumatic, and electrical systems Ensure all company trucks and equipment are maintained to meet safety and cosmetic standards Clean and detail vehicles; apply and maintain decals Maintain a safe, organized, and clean workspace Track and maintain inventory of tools and shop supplies Read and interpret manuals, work orders, and schematics Document all services and repairs through service work orders Follow OSHA and company safety protocols Perform other tasks and duties as assigned What You Bring to the Team: High school diploma or equivalent required Minimum of 5 years of experience in truck or heavy equipment maintenance and repair Valid driver’s license with a clean driving record Must provide your own tools (as specified) Strong understanding of diesel engines, hydraulics, pneumatics, and electrical systems Ability to communicate effectively and work independently Able to lift 50 lbs, kneel, bend, and work in varying weather conditions Comfortable with documentation and basic reporting What We Offer: Competitive hourly wage based on experience and qualifications Comprehensive benefits package, including: Health, dental, and vision insurance Retirement plan with employer contributions Paid vacation and sick time Safety boot reimbursement Ongoing training and professional development Growth opportunities into Lead Mechanic, Shop Foreman, or Fleet Management roles Apply Today and Keep Power Trip Rolling Strong! We’re excited to meet candidates who share our commitment to excellence, safety, and teamwork.

Job Description We're seeking a Ford Certified Heavy Line Technician with proven expertise in both gasoline and diesel engine repair. This role is for a master-level wrench who can handle major engine, transmission, and driveline work on everything from EcoBoost-equipped cars and trucks to 6.7L Power Stroke Super Duty diesels. If you're a Senior Master or working toward it and want consistent heavy-line work with the hours to match, we want to talk to you. Compensation: $40 - $60 hourly Responsibilities: You'll perform major mechanical repairs including engine teardown, rebuild, and replacement; cylinder head and head gasket work; timing chain and cam phaser service; turbocharger diagnosis and replacement; transmission removal and replacement; and differential and driveline repair across the full Ford and Lincoln lineup. On the diesel side, you'll diagnose and repair 6.7L Power Stroke engines including high-pressure fuel systems, injectors, EGR and aftertreatment systems (DPF, DEF/SCR), and turbo work. You'll use Ford diagnostic platforms (FDRS/FJDS) to perform accurate root-cause diagnosis, document all work clearly for warranty compliance, complete repairs to Ford factory standards, and maintain the certifications required to keep the store's warranty work flowing. You'll work alongside our shop foreman and service advisors to deliver accurate estimates, meet promise times, and keep comebacks at or near zero. Qualifications: Current Ford certification required; Ford Senior Master or Master Technician status strongly preferred Lincoln certification a plus given our dual-franchise service operation Minimum 5 years of dealership-level heavy line experience, including engine and transmission R&R Documented experience with 6.7L Power Stroke diesel diagnosis and repair; 6.7L diesel certification preferred Strong diagnostic skills with FDRS/FJDS, oscilloscopes, and modern diagnostic equipment ASE certifications a plus (A1, A2, A3, T2, or Master status) Ability to perform warranty repairs to Ford documentation standards with clean, accurate story lines Own tools adequate for heavy line work (specialty tools provided) Valid California driver's license with an acceptable driving record; ability to test drive customer vehicles including diesel duallys Ability to lift up to 50 lbs, work on your feet in a shop environment, and maintain a safe, organized bay Team player who communicates well with advisors, parts, and fellow technicians About Company Caruso Ford has been a trusted name in the Long Beach community for over three decades. Our story began in 1985 when the Caruso family acquired Pacific Ford, followed by the addition of Long Beach Lincoln in 1992. In 2012, we proudly adopted the Caruso name — a reflection of the family values and commitment to excellence that have guided us from the very beginning. We believe buying and owning a car should be a stress-free, personal experience. Whether you're shopping for a new Ford, exploring our selection of quality pre-owned vehicles, or bringing your car in for service, our knowledgeable and friendly team is here to help every step of the way. Our fully equipped service center is staffed by factory-trained technicians using genuine Ford parts, so you can trust your vehicle is in the best hands. We're more than a dealership — we're your neighbors. And we look forward to earning your trust for the next 30 years and beyond.

Job Description Position Overview: We are proud to support our nation's Veterans by offering career opportunities that value military training, discipline, and technical expertise. As a Diesel Technician, you will leverage the skills acquired during your military service to diagnose, repair, and maintain diesel engines and heavy-duty vehicles. This position is exclusively for U.S. Military Veterans who have received an Honorable Discharge. Key Responsibilities: • Perform routine maintenance and inspections on diesel engines and heavy-duty vehicles., • Diagnose mechanical, electrical, and hydraulic issues using diagnostic tools and technical manuals., • Conduct engine rebuilds, component overhauls, and part replacements with precision., • Interpret work orders and technical documentation to determine repair procedures., • Maintain accurate service records and ensure documentation complies with company and regulatory standards., • Utilize military-level discipline and attention to detail in every repair or service task., • Adhere to all OSHA and company safety procedures., • Collaborate with team members to ensure efficient workflow and maintain high operational readiness., • Communicate effectively with supervisors and team leaders regarding job status and repair needs. Requirements Requirements: • Must be a U.S. Military Veteran with an Honorable Discharge (documentation required)., • Proven experience working on diesel engines during military service (e.g., tanks, tactical vehicles, generators, transport trucks)., • Ability to read and interpret service manuals, schematics, and technical bulletins., • Familiarity with hand tools, power tools, and diagnostic equipment., • Strong problem-solving and mechanical aptitude., • Physical ability to lift heavy objects, stand for extended periods, and work in various environments., • Valid driver’s license (CDL is a plus). Preferred Qualifications: • MOS/Rating background in mechanical fields such as (but NOT limited to):, • 91B (Wheeled Vehicle Mechanic – Army), • 3521 (Organizational Automotive Mechanic – USMC), • CM (Construction Mechanic – Navy), • 2T3X1 (Vehicle Maintenance – Air Force), • Diesel or automotive technician certifications (ASE, OEM-specific, etc.)., • Experience with military or civilian fleet maintenance operations., • Completion of a military technical school or SkillBridge program. Benefits Why Join Us? • Veteran-friendly workplace culture, • Competitive pay and comprehensive benefits, • Continued training and advancement opportunities, • Transition support and mentorship from fellow Veterans, • A mission-driven environment where your service is respected and valued

Job DescriptionBenefits: • Company parties, • Employee discounts, • Opportunity for advancement, • Training & development Benefits/Perks • Careers Advancement Opportunities, • Flexible Scheduling, • Competitive CompensationJob Summary We are looking for a skilled Mechanic to join our busy repair shop. As an Auto Mechanic, you will assist our customers by diagnosing and repairing issues with vehicles’ performance and function. As an Auto Mechanic, you must have an in-depth understanding of all vehicle systems and components. You will also be responsible for maintaining repair shop equipment, preparing cost estimates, and maintaining a welcoming environment. The ideal candidate is skilled in communicating with customers, able to explain vehicle issues clearly and concisely and provide valuable advice. Responsibilities • Diagnose and repair vehicles coming into the shop, • Carry out routine vehicle maintenance tasks such as tire rotations, oil changes, and brake pad replacements, • Conduct in-depth vehicle inspections of all systems, including engine, transmission, and brakes, • Create repair estimates and timelines and convey information to customers in an easy-to-understand manner, • Maintain accurate repair shop records and paperwork, • Ensure a high level of customer satisfaction and repeat business Qualifications, • High school diploma or GED is required, • Associate degree or completion of an automotive service technician training program is preferred, • Automotive Service Excellence/ASE certification or Society of Automotive Engineers/SAE certification is preferred, • Strong customer service and communication skills are required, • Some diesel experience, • Be able to lift 40 LBS with no problem

Job DescriptionDiesel Mechanic | Fleet Maintenance Technician | Commercial Truck & Equipment Repair Location: Montebello, CA Job Type: Full-Time, W2 Pay: $20.00 - $40.00 Per Hour DOE + Benefits Industry: Fleet Maintenance, Diesel Repair, Commercial Truck Repair, Heavy Equipment Maintenance Join TACI and Help Keep the Equipment That Builds America's Infrastructure Running Turn Around Communications, Inc. (TACI) is a national telecommunications, broadband infrastructure, and digital infrastructure services provider supporting fiber optic networks, ISP deployments, utility construction, and mission-critical infrastructure projects throughout the United States. As demand for broadband expansion, AI infrastructure, data centers, and utility modernization continues to grow, TACI is expanding our fleet and investing in the equipment that powers our operations. Our fleet of commercial trucks, trailers, construction equipment, and specialty vehicles is critical to the success of our field teams, and we're looking for skilled mechanics to help keep them operating safely and efficiently. At TACI, our people are our greatest asset. We invest in safety, training, career development, and advancement opportunities while providing stable, year-round employment and the chance to work with a growing national infrastructure company. Position Summary TACI is seeking an experienced Diesel Mechanic to perform diagnostics, preventative maintenance, repairs, and inspections on our fleet of commercial trucks, trailers, and construction equipment. This position is responsible for ensuring our vehicles remain safe, reliable, and compliant with all DOT and company standards. The ideal candidate will have experience diagnosing and repairing diesel engines, particularly Ford commercial trucks, along with knowledge of hydraulic systems, brake systems, electrical repairs, and preventative maintenance programs. Required Qualifications • Minimum 1–3 years of diesel mechanic or commercial truck repair experience, • Experience diagnosing and repairing Ford commercial diesel trucks, • Strong diesel engine mechanical knowledge, • Experience repairing brake systems, hydraulic systems, lighting, and electrical components, • Ability to perform preventative maintenance and fleet inspections, • Basic knowledge of DOT and BIT compliance requirementsPreferred Qualifications, • Class A Commercial Driver's License (CDL), • ASE Medium/Heavy Truck Certification, • Experience maintaining construction equipment and utility vehicles, • Experience with hydraulic equipment and aerial lift systems, • Welding or fabrication experience, • Bilingual English and SpanishPrimary ResponsibilitiesFleet Maintenance & Repairs, • Diagnose and repair diesel engines, with emphasis on Ford commercial trucks, • Perform preventative maintenance on commercial trucks, trailers, and fleet vehicles, • Troubleshoot engine, electrical, hydraulic, lighting, and brake system issues, • Repair and replace worn or damaged components to minimize equipment downtime, • Perform inspections to identify mechanical issues before failures occur, • Complete scheduled maintenance services according to manufacturer recommendationsFleet Operations Support, • Coordinate movement of trucks, trailers, and equipment between job sites, vendors, and repair facilities, • Assist with sourcing replacement equipment or coordinating third-party repairs when necessary, • Maintain accurate maintenance records, repair histories, and service documentation, • Ensure work orders are completed accurately and on schedule, • Support emergency equipment repairs to minimize operational downtimeSafety & Compliance, • Follow all company safety policies and shop safety procedures, • Maintain compliance with DOT, BIT, and fleet maintenance regulations, • Keep work areas clean, organized, and free of hazards, • Properly maintain tools, shop equipment, and diagnostic equipment, • Promote a culture of safety, accountability, and quality workmanshipWhat Success Looks Like, • Fleet vehicles remain safe, reliable, and available for field operations, • Repairs are completed accurately and efficiently, • Preventative maintenance schedules are consistently maintained, • Work orders and maintenance records are completed accurately, • Minimal equipment downtime and high fleet reliability, • Strong teamwork and communication with operations and field personnelPhysical Requirements, • Ability to lift and carry up to 50 pounds without assistance, • Ability to stand, bend, kneel, crawl, and work underneath vehicles for extended periods, • Ability to climb ladders up to 12 feet, • Ability to safely operate shop tools, lifts, and diagnostic equipment, • Ability to work overtime, weekends, or emergency repair assignments when required, • Ability to work in varying shop and outdoor weather conditionsBuild Your Future With TACI America's investment in broadband expansion, digital infrastructure, and utility modernization continues to create long-term career opportunities for skilled tradespeople. At TACI, you'll play an important role in maintaining the fleet that supports these critical infrastructure projects while building a rewarding career with a company committed to safety, quality, and professional growth. Join TACI and help keep America's infrastructure moving. Apply today. Keywords: Diesel Mechanic, Fleet Mechanic, Diesel Technician, Fleet Maintenance Technician, Commercial Truck Mechanic, Heavy Equipment Mechanic, Ford Diesel Technician, Fleet Maintenance, Truck Repair, Trailer Repair, Hydraulic Systems, Brake Repair, Preventative Maintenance, DOT Compliance, BIT Inspection, Commercial Vehicles, Construction Equipment, Diesel Engine Repair, Fleet Operations, Heavy Duty Mechanic. Job Posted by ApplicantPro

Job DescriptionCompany overview:Car Lux Inc is a premier used and luxury car dealership in Inglewood, CA, proudly serving Los Angeles, Hawthorne, Lennox, and surrounding areas. We offer a huge selection of pre-checked used cars, luxury vehicles, and SUVs, all inspected through detailed pre-check inspections to ensure quality and reliability. From BMW and Mercedes-Benz to Bentley, Lamborghini, and Porsche, our inventory features high-end and luxury vehicles designed to meet a wide range of lifestyles and budgets. We specialize in aggressive financing solutions, including bad credit, second-chance financing, and we-finance programs. At Car Lux Inc, credit challenges don’t stop you from driving a high-end vehicle. Our experienced finance team works with multiple lenders to help get approvals fast, even if you’ve been turned down elsewhere. With honest pricing, quality vehicles, and customer-focused service, we make buying a luxury car easier and more accessible. Job Summary:The Mechanic is a key member at Car Lux, Inc. This position works closely with the leaders to perform a wide range of complex and highly confidential administrative support duties requiring discretion and independent judgement. The position is responsible for a broad range of strategic and tactical high level executive administrative support activities and is expected to work with discretion and judgment in all aspects of the role. The incumbent manages a variety of special projects, some of which may have organizational impact. Essential Duties and Responsibilities: • Perform advanced diagnostics and repairs on mechanical and electrical vehicle systems, • Troubleshoot complex automotive issues using diagnostic tools and equipment, • Provide technical guidance and support to technicians in the shop, • Assist with prioritizing and managing repair workflow to ensure efficiency, • Conduct final inspections to ensure quality and safety standards are met, • Test drive vehicles to verify proper operation after repairs, • Maintain accurate repair documentation and service records, • Ensure compliance with dealership policies, safety standards, and manufacturer repair procedures, • Assist in training and mentoring technicians when needed Qualifications: • Minimum 5–7 years of automotive repair experience, • Experience with European luxury vehicles strongly preferred, • Advanced diagnostic experience required, • Previous leadership or senior technician experience preferred, • Valid driver’s license with a clean driving record, • ASE certifications are a plus, • Ability to work under pressure in a fast-paced environment, • Ability to organize a daily workload by priorities, • Must be able to meet deadlines in a fast-paced quickly changing environment, • A proactive approach to problem-solving with strong decision-making skills, • Must be able to always maintain confidentiality of information, • Professional level verbal and written communications skills, • Computer literate (intermediate), • Ability to maintain professionalism when interacting with internal and external customers., • High school diploma or equivalent required; associate degree preferred., • Prior automotive dealership finance or administrative experience preferred., • Working knowledge of dealership management systems (DMS)., • Strong understanding of compliance-driven documentation processes., • Excellent organizational skills and attention to detail., • Ability to manage multiple transactions in a fast-paced environment., • Strong verbal and written communication skills. Working Conditions: • Work performed in a service shop environment, • Frequent standing, bending, lifting, and use of tools and equipment, • Ability to lift up to 50 pounds and perform physical tasks associated with vehicle repair The above responsibilities are not all encompassing and may be modified as needed. Pay is DOE. Can be negotiated. Competencies: • Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans., • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Car Lux, Inc. is an equal opportunity employer and does not discriminate based on race, color, gender, religious creed, religious dress and grooming practices, marital or familial status, domestic partner status, national origin or ancestry, physical or mental disability, medical condition, genetic characteristics or information, sex (including pregnancy, childbirth, breastfeeding and medical conditions related to pregnancy, childbirth, or breastfeeding), sexual orientation, military or veteran status, gender identification, and gender expression or any other consideration or characteristic made unlawful by federal, state, or local laws. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Quixote is a leading provider of production services for the entertainment industry. Quixote rents production trailers, trucks, lighting and grip and other equipment to support a wide range of productions including long-form television and feature film, as well as high-end photo shoots and commercials. We operate in Los Angeles and New York, while also servicing on-location productions across the U.S. Quixote offers unparalleled convenience, service and quality to productions of any size. At Quixote, everyone on set is a VIP. Job Summary: Quixote Studios is looking for a full-time Mechanic to join our transportation team. The purpose of this role is to perform mechanical repairs, oil changes on vehicles, DOT Inspections, and assist with the day-to-day shift operations. Ability to perform light and heavy manual labor as well as work special hours as required. What You'll Do: Perform mechanical repairs on both light, medium, and heavy equipment such as trucks, trailers and lot equipment in a timely manner. Maintain and verify vehicle functional condition by conducting inspections, repairing engine failures, performing oil changes, repairing mechanical and electrical systems malfunctions, replacing parts and components, and repairing body damage. Diagnose and repair generators, thermostats, water heater, plumbing and electrical systems. Disassemble machinery or equipment to remove parts and make repairs. Inspect equipment, analyze mechanical/operational errors, and report all findings to Fleet Service Manager. Maintain all vehicles, equipment, generator, lot and building needs. Perform all interior/exterior repairs, generator maintenance and service, and other minor repairs in a timely manner. Follow and adhere to safety rules, regulations, and proper use of safety equipment that pertains to each job skill and qualification. Meet with supervisor to review information pertinent to the job performance, such as daily assignments, business levels, pending projects, etc. Perform other duties as assigned by supervisor. What You'll Need: 2+ years Automotive Technician experience Must provide and maintain their own tools necessary to perform the essential functions of the role Experience, knowledge and skills of the methods, materials and equipment used in the maintenance and repair of various types of equipment and power-driven tools Working knowledge of the occupational hazards and safety precautions of the trade Proficient math skills in unit of measurement and multiplication, division, addition, subtraction Ability to understand and carry out oral and written instructions Ability to analyze and repair mechanical failures Must engage work with a high sense of urgency and be detail oriented. Ability to work effectively and establish good working relationships with internal employees and external clients Attentive to details - accurate and thorough Ability to work independently, safely, and efficiently and be a team player. Physical Requirements: Requirements are representative of those needed to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Heavy work: requires ability to lift, twist and carry up to 50 pounds and manipulate (pushing, pulling) up to 160 pounds of product, et cetera. Physical activities required of this job include, but are not limited to: bending, carrying, climbing, crouching, feeling, finger movement, grasping,, kneeling, lifting, pulling, pushing, rapid work speed, reaching, repetitive motions, seeing, sitting, standing, stooping, talking, twisting, walking, and walking on irregular surfaces. Working Conditions: Activities include regularly working in outside weather conditions, exposure to extremes of temperature, visibility, wet and/or humid conditions and vibrations. Noise level in work environment is usually loud. Dust, mechanical hazards, moving objects, operating vehicle, and shift work. Quixote Studios is proud to be an Equal Opportunity employer. We consider all qualified applicants for employment without regard to race, color, religion, creed, sex, gender identity or expression, national origin, age, disability, medical condition, marital status, sexual orientation, genetic information, protected veteran status, or any other basis protected by applicable law, including federal, state, and local fair chance laws. Employment is contingent upon completion of applicable screenings in accordance with local laws. The company uses E-Verify to confirm the identity and employment eligibility of all new hires. If you require a reasonable accommodation during the application or hiring process, please notify us at talent@quixote.com so we can support you throughout the recruitment experience.

Job Description As a valued member of our team, the Maintenance Truck Tech III is required to perform all duties of the level 1 and level 2 technician. In addition, should show proficiency one of the two mayor skill level categories and about 60% proficiency in another category. Category 1 includes internal repairs on engines, transmissions, and gear boxes. Category 2 includes electronic control modules and sensors complex electrical and after treatment repairs. Shift 1. Tuesday - Saturday from 07:00 am - 3:30 pm Occasional overtime may be required as needed. Travel Required: Estimated less than 25% Benefits· Paid Holidays· Paid Vacation· Medical, Dental, Vision· 401k Retirement · $100 credit for boots after 90 days · Uniforms provided · Tool allowance when applicable · Monthly credit for cellphone use Essential Functions: • Appropriate tools required to diagnose, perform mayor repairs in vehicles and to effectively do inspections and routine preventive services., • Able to use compressed gas torch and adjustments., • Effectively do inspections and mechanical repairs to equipment and routine preventive services., • Efficient communication and computer skills for proper file documentation on each job performed., • Knowledge and ability to identify the proper name of all visible parts and non-visible parts in a vehicle., • Maintain a high standard of safety, cleanliness, and efficiency in all maintenance., • Ensures vehicles meet CHP/BIT/PM inspection requirements., • Will maintain appropriate record keeping for Bit inspections, DVIRs, work done description and work orders., • Replace, install and service brake systems, cab and sheet metal components, engine accessories, HVAC systems, hydraulic systems, and lighting electrical systems., • Replace, install and service mixer truck equipment, product transfer systems, starting systems, steering systems, transmissions, wheels, hubs and bearings., • Replace, install frame components and basic diagnose of electronic control systems., • Replace, install, service and diagnose charging systems, clutches and drive lines, and suspensions systems., • Will inspect and identify vehicle conditions on different types of equipment such as tractors, trailers, or mixers., • Will install, select, or identify proper tire replacements & legal limit knowledge., • Diagnose and repair vehicle system engine failure and vehicle system transmission & gear box failure., • Follow manufacture service and troubleshooting procedures, diagnose and repair vehicle system., • Diagnose and repair vehicle Aftertreatment systems, Advance Electrical systems, Air brake system and brake valve diagnose., • Diagnose and repair vehicle Hydraulic system failure., • Diagnose and repair HVAC failure diagnose., • Complete all maintenance duties as assigned, and repair all equipment on property including, but not limited to, diesel, plant, or yard equipment., • Perform routine and preventive maintenance to keep vehicles and equipment in compliance with DOT and company standards. Non-Essential Duties: • Efficient organizational skills for scheduling and periodization of jobs., • Will prepare metal surfaces and welding techniques to complete assigned tasks., • Track and schedule operations or manager on vehicles status and updates., • Perform other duties as assigned by management. Core Competencies: • Ability to read and interpret documents., • Basic math and measurement skills., • Knowledge of methods, tools, and equipment utilized in maintenance repair Travel Required: Estimated less than 25% Minimum Education and Experience • High school diploma., • 4+ years of heavy-duty tractor maintenance experience., • 4+ years experience of work on electrical, mechanical, and hydraulic systems., • Must have own tools. Preferred Education and Experience • Associates degree, technical school certificate or equivalent experience., • 5+ years of heavy-duty tractor maintenance experience., • 5+ years experience of work on electrical, mechanical, and hydraulic systems., • 3+ years experience welding. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to walk, climb, or balance, stoop, kneel, crouch, or crawl and talk or hear. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, toxic or caustic chemicals and outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, extreme heat, and risk of electrical shock. The noise level in the work environment is usually moderate to loud. The employee is regularly exposed to wet or slippery ground conditions. Employees must wear the required personal protective equipment; up to and including safety vest, hard hat, ear protection, gloves, and safety glasses. Able to climb height up to 10 feet. This Organization Participates in E-VerifyEsta Organizacion Participa en E-Verify Associated Ready Mixed Concrete is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. Associated Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Job Description Velocity Vehicle Group (VVG) is a premium commercial brand medium to heavy truck dealership that offers the full-service experience for our customers, from an outstanding sales organization to highly skilled technicians to service your vehicle, and on demand parts. Our goal is to be your one stop shop experts for all truckers, owner operators, fleets and companies. This coupled with our Leasing and Rental business and our Financial services business make VVG the leading Truck dealership. What’s in it for You: VVG is a fast paced and growing organization that is looking for candidates that are ready for a daily challenge and cannot wait to provide superior customer service both internally and externally. VVG offers fantastic Culture as well as competitive pay, 401K W/Match, Medical, Dental, & Vision benefits. Become a part of our team and immerse yourself in a company that fosters a Great Place to WorkTM culture! Compensation: • Hourly $39-$50/hr. depending on experience and qualifications, • Plus Incentive Bonus Plan, • Full Time position Benefits Velocity Vehicle Group Offers: • Fantastic Culture, • 401k + match, • Health, Dental & Vision Insurance + HSA & FSA, • Employer paid Life Insurance, • Paid Vacation Days, • Sick Leave, • Company perks such as employee discounts, company events and training programs, • Excellent Training and Career Advancement Opportunities What You’ll Do: Senior Technicians are responsible for diagnosing truck problems and performing truck repairs. Technicians create repair plans and fill out parts requisitions for needed parts. They are also responsible for tagging all warranty parts that are replaced and for turning in parts with core value. Technicians must also communicate updates to their Foreman daily and must maintain toolboxes organized and workstations clean and safe. Technicians perform tasks and possess skills noted below and have efficiency ratings of 85% or above. Responsibilities & Skills Assessment: We have 2 levels of technician roles available. B-Level Technician: • Advanced diagnostics skills, • Complete engine repairs within SRT time, • Complex chassis repairs within SRT time, • Knowledgeable on all vehicle component repairs, • HVAC A-Level Technician: • Proficient on all vehicle component repairs, • Able to diagnose all vehicle component failures, • Competent in root cause failure analysis, • Vibration analysis, • Aftertreatment repairs, • Aftertreatment diagnostics Qualifications: • High school diploma or the equivalent, • Mechanical aptitude, • Positive attitude, • Dedication to Excellence, • Motivated, • Team Oriented, • Desire to Succeed Physical Requirements: • Must be able to lift up to 50 pounds at times, • Must be able to pass post offer drug test, physical and background check We’re looking to hire and develop the best! If you are looking for a challenge and want to continue growing your technical skills to become an Experienced Technician, apply today and take your career to the next level! Velocity Vehicle Group is an equal opportunity employer. Velocity Vehicle Group prohibits discrimination and harassment of any type and affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. \nCompany Description www.velocityvehiclegroup.com www.velocityvehiclegroup.com

Job DescriptionLooking for a technician to install air compressors and related equipment. Job to consist of removing old units, set new equipment in place. Plumb components together and into existing systems. Some minor electrical work on occasion. May include service and maintenance on existing equipment from time to time. Must be able to perform work independently with minimal supervision. Good driving record is a must. Must be able to lift 50lbs on a consistent basis, work in industrial settings with continuous walking, reaching, kneeling, and bending. Company truck & uniforms provided. Medical after 90 days, 401K after 1 year.

Job Description Unlock Your HVAC Career Potential with Matrix HVAC Inc. - Join Us as a Service and Installation Technician! Position: HVAC Service and Installation Technician Company: Matrix HVAC Inc Pay Range: $25 to $33+ per hour, based on experience and certifications Employment Type: Full-Time Schedule: Monday–Friday Location: SoCal, San Diego, Riverside, and Orange counties. Company vehicle provided for work-related travel. Job Overview: Matrix HVAC Inc. is seeking a dedicated and skilled Service and Installation Technician to join our growing team. As a Service and Installation Technician, you will work on a variety of residential and commercial projects, ensuring high-quality HVAC installations and repairs. You will work in a supportive, engaging, and professional environment where you will have the opportunity to learn hands-on from experts and grow in your career. We value a balance between hard work and enjoying our time as a team, reflected in our team-building events and a culture of mutual appreciation. Who We Are: Matrix HVAC Inc. is a leading HVAC service provider specializing in both residential and commercial projects. We pride ourselves on offering a fun and lighthearted work environment where your skills are respected, and your professional development is a priority. Our clients appreciate our well-built relationships, and our technicians are empowered with training and the tools they need to deliver exceptional service. Join us and experience a work culture where you are more than just an employee! Key Responsibilities: • Install, service, and repair HVAC systems for residential and commercial properties., • Troubleshoot and diagnose issues to ensure the efficient functioning of HVAC equipment., • Adhere to Matrix HVAC standards, guidelines, and regulations, including safety protocols., • Conduct routine maintenance checks and inform clients of maintenance or repair needs., • Collaborate with team members to complete jobs efficiently and ensure customer satisfaction., • Provide excellent customer service and maintain positive client relations., • Maintain accurate records of all work performed and materials used., • Stay updated on industry trends and manufacturer training programs. Qualifications: • Experience in a similar HVAC service or installation role (we'll teach you the Matrix HVAC way!)., • EPA Certification is required., • Strong technical and problem-solving skills in HVAC system diagnosis and repair., • Ability to work independently and as part of a collaborative team., • Excellent communication and customer service skills., • Valid driver's license with a clean driving record. Ability to pass a professional review and drug screening., • Commitment to ongoing learning and staying current with industry advancements. Benefits: • Compensation Perks: 401(k) Retirement Savings with company match up to 4%, bi-weekly pay, overtime opportunities, and a referral bonus program., • Health & Wellness: Medical, dental, and vision insurance options, life and disability insurance packages, and company contributions of $350 towards employee health costs. We also provide all necessary safety equipment., • Work-Life Balance: Enjoy weekends off, paid time off (holidays, vacation, and sick days), and quarterly team-building events to keep our culture vibrant., • Career Development: Paid training and certifications, including safety and technical training, OSHA, fall protection, and lift operation. Our hands-on approach ensures skills that no school can teach., • Unique Perks: Company vehicle or mileage reimbursement, provided uniforms and safety gear, and exciting annual company outings such as fishing, concerts, and sports events! Work Schedule: • Full-time, Monday through Friday, • Occasional overtime as needed, with weekends off! Work Location: • Various residential and commercial sites across SoCal, San Diego, Riverside, and Orange counties. Company vehicle provided for work-related travel. Equal Employment Opportunity:Matrix HVAC Inc. is an equal opportunity employer that embraces diversity in our workforce. We provide equal employment opportunities to all employees and applicants, without regard to race, color, religion, gender, national origin, age, disability, or any other protected status. #OHFC25

Job DescriptionDescription: Optimus Property Management, Inc. (www.opminc.com), is looking for a Maintenance Trainee to join our team and begin a hands-on apprenticeship in multifamily property maintenance. This entry-level role is designed for someone who wants to build a long-term career in maintenance and skilled technician work. After successfully completing the trainee program, you will be promoted to Handyman with an increase in pay and a clear path toward Maintenance Technician, Advanced Technician, and potential supervisory roles. As a Maintenance Trainee, you will work closely with an experienced maintenance technician who will train you in all core areas of property maintenance. You will shadow daily work, learn each property’s unique needs, and assist with repairs, preventive maintenance, unit preparation, work orders, and general building operations. Candidate must have a basic set of tools before their first day of work. Requirements: Skills and Qualifications: · Willingness to learn and take direction in a hands-on, fast-paced maintenance environment · Basic mechanical aptitude, comfort using tools, even if informal (home projects, automotive, etc.) · Strong reliability, time management, and ability to follow established processes · Good communication skills and a positive, customer-service mindset when interacting with residents and team members · Ability to lift, carry, and move equipment or materials as needed, and comfortable working at multiple properties throughout the day · Pick-up and delivery of materials and supplies, and other miscellaneous duties as assigned · Maintain cleanliness at all work sites · Valid California driver’s license and reliable transportation to visit various locations/job sites · Proficient in English · Authorized to work in the US Compensation: · $20.00 to $22.00 per hour, based on experience · Promotion to handyman, pay increase, and $250 bonus after successfully completing the trainee program · $500 bonus after one year of consistent employment · Mileage Reimbursement · Monthly phone stipend · Medical, Dental, and Vision Insurance · 9 Paid Holidays / 6 paid sick days / 10 paid vacation days · Paid early dismissal days · 401(k) with match Physical Demands: · Regularly lift and/or move objects 10-50 lbs · Frequently required to stand, walk, stoop, kneel, squat, climb, crouch, or crawl Optimus Property Management, Inc. is an Equal Opportunity Employer. We are committed to equal treatment of all employees without regard to race, national origin, religion, gender, age, sexual orientation, veteran status, physical or mental disability, or other basis protected by law.

Job Description Overview At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: Competitive pay from $32 - $ 45.00 sign onn Bonus $3,000.00 DOE!!!, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications • 3+ years of commercial experience as an HVAC and Refrigeration Technician, • Active EPA Certification, • Valid driver's license, • Excellent customer relations and interpersonal skills, • Mechanical aptitude and troubleshooting skills, • Ability to safely lift up to 50 lbs., climb and balance on a ladder, and work in elevated/high locations.

Job Description Behavioral Aide Location: School Sites Across Multiple Partner Districts | On Site | Part Time Description of Job Duties and Expectations Position Type: • Part-Time (Monday through Friday during school hours), • Compensation Range: $20 - $25 Locations: • Various locations available - Montebello, Cerritos, Hacienda La Puente, Lynwood, Paramount, Hawthorne Responsibilities: • Primary responsibility is direct support to students with special needs, • Participate in activities planned by the school district staff, • Assists in the preparation and development of instructional training activities and materials, • Assists school district staff with in-class activities based on specific instructions, • Assists school district staff in maintaining a neat and orderly classroom environment by keeping materials and equipment organized, • Assists the school district staff in maintaining a good learning atmosphere by using effective teaching and behavior management techniques, • Under direct supervision, staff may assist with assessing student needs, • Provides the school district staff with general impressions and observations of students they work with, • Works with students individually, in small groups, whole groups or learning centers planned by the school district staff and provides instruction to student, • May assist with classroom technology, adaptive devices, and equipment, • Assists with social skills, • Assists with toileting, diapering, dressing, and hygiene, • Keeps an organized and clutter-free restroom and/or changing area, • Administers emergency treatment when necessary, • May take children into the community, • May assist children to feed themselves, • May be assigned in more than one school location, • Assists with playground supervision, • Works cooperatively with students, school district staff, and administration while performing assigned duties and responsibilities, • Reinforces lessons/activities with small groups of learners, • Assists school staff in crisis intervention and discipline, • Participates in program planning meetings at the request of the school staff, • Performs other job-related work as required Qualifications: Ability to: • Understand and anticipate the needs of children, • Operate classroom technology equipment, • Understand and follow oral and written instructions, • Establish and maintain effective working relationships with children and adults, • Maintain professionalism and confidentiality, • Show competence and assist with academic skills, e.g. reading and math, • Communicate orally with correct language usage Knowledge of: • The general needs and behavior patterns of children, • Safe work practices, • Correct English usage, spelling, grammar and punctuation, • Needs and concerns of children with a variety of special needs, • Perform general clerical duties at the request of supervisor Skills: • Read and understand instructions, follow and give clear directions, • Work independently and make decisions within the framework of established guidelines, • Adapt to individual needs of school staff and students and work with interruptions, • Identifying and responding quickly to emergency situations in a calm and resourceful manner, • Establishing and maintaining cooperative working relationships with those contacted in the course of work Experience: • Recent experience in working with groups such as youth groups, child centers, or playgrounds and/or experience requiring organizational skills is desirable. Education: • Proof of High School Diploma or equivalency; or proof of an A.A. degree, 48 college units; or pass the Paraeducator Exam Physical, Mental, and Environmental Demands: Physical: • Sitting, walking level surface, reaching, bending, use of both legs, • Wrist/arm motion, grasping/holding, use of both hands, • Regularly lift 1-15 lbs. *occasionally lift 26-40 lbs, • Regularly carry/push 1-15 lbs *occasionally carry/push 26-40 lbs, • Color vision, near vision, use of both eyes, • Sense of smell, • Normal hearing, distinguish sounds in transmission, • Speaking Mental: • Occasional stress of emergencies, normal work standards stress, ability to work with interruption, reading, interpreting policy, memorize and recall objects, people, analyze problems and generate alternatives Working Environment: • Occasional exposure to the sun, occasional wetness, dust, occasional exposure to childhood diseases Requirements/Conditions of Employment: • Resume, • Complete mandatory training as designated by BEAM Growth/Advance Training Opportunity • Registered Behavior Technician (RBT) Training is accessible to inspire & promote growth. 40-hour online training to be completed on your own time. Once a certification is provided and the 90-day introductory period is complete, you will be promoted and receive a compensation increase. Schedule: • Mornings, • Monday to Friday, • No weekends Ability to commute/relocate: • Montebello, Cerritos, Hacienda La Puente, Lynwood, Paramount, Hawthorne, • Reliably commute or planning to relocate before starting work (Required), • Your assignment might vary from district to district and school to school Experience: • Behavioral Therapist/Interventionist: 1 year (Required) Location Montebello, Cerritos, Hacienda La Puente, Lynwood, Paramount, Hawthorne Department New Hire Employment Type Part-Time Minimum Experience Entry-level Compensation 20-25

Job Description * Minimum of 2 years cleaning pools REQUIRED * Must have your own truck About Us SkyBlue Pool Care is a fast-growing pool service company known for providing high-quality, reliable service across Los Angeles and the San Fernando Valley. We care about our customers, our team, and taking pride in the work we do. We’re seeking motivated individuals who want to grow with us and represent professionalism in the field. Job Summary As a Pool Service Technician, you’ll be responsible for maintaining a regular route of residential and/or commercial swimming pools. You’ll ensure pools are clean, balanced, and fully operational, and report any issues that may need repair. This is an independent, field-based role where consistency, communication, and accountability are key. Key Responsibilities • Drive a scheduled route to clean and maintain pools (vacuuming, brushing, netting, empty baskets, etc.), • Test and adjust water chemistry (chlorine, pH, alkalinity, stabilizer, etc.), • Add chemicals as needed in compliance with safety guidelines, • Inspect pool equipment (pumps, filters, heaters, automation) for functionality, • Communicate with office/dispatcher regarding route updates, issues, or delays, • Identify and report any needed repairs or unusual conditions, • Maintain a clean and organized work vehicle, • Represent the company professionally at all times, • Use mobile app (e.g. PoolBrain or Skimmer) for logging service stops Qualifications • Minimum of 2 years cleaning pools REQUIRED, • *Must have your own truck, • Valid driver's license and clean driving record, • Comfortable working outdoors in all weather conditions, • Able to lift 50 lbs and perform physical labor daily, • Reliable, punctual, and self-motivated, • Good communication skills — both with office staff and customers, • Ability to troubleshoot common pool issues preferred What We Offer • Competitive pay with opportunity for raises, • Paid training and certification opportunities, • Paid time off and sick days (after eligibility period), • Company tools provided, • Gas reimbursement, • Growth potential for lead tech, repair tech, or management rolesCompany DescriptionSkyBlue Pool Care is a fast-growing pool service company known for providing high-quality, reliable service across Los Angeles and the San Fernando Valley. We care about our customers, our team, and taking pride in the work we do. We’re seeking motivated individuals who want to grow with us and represent professionalism in the field. Location across West/Central LA + San Fernando Valley.SkyBlue Pool Care is a fast-growing pool service company known for providing high-quality, reliable service across Los Angeles and the San Fernando Valley. We care about our customers, our team, and taking pride in the work we do. We’re seeking motivated individuals who want to grow with us and represent professionalism in the field. Location across West/Central LA + San Fernando Valley.

Job DescriptionBenefits: • Bonus based on performance, • Company car, • Competitive salary, • Free uniforms, • Opportunity for advancement, • Paid time off, • Training & development Benefits/Perks • Flexible Scheduling, • Competitive Compensation, • Career Advancement OpportunitiesJob Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Basse Pay PLUS commission! Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling refrigerants, • Establish customer rapport to ensure the highest levels of satisfaction, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiring, • Replace ductwork, • Air BalanceQualifications:, • Past experience as an HVAC service technician or comparable education, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of unitary, split and ductless systems, • Ability to climb ladders, crawl, and lift 40 pounds, • NATE certification a PLUS!

Job DescriptionSummary We are seeking a skilled and reliable HVAC Technician with proven experience in both commercial and residential systems, including refrigeration equipment. This position involves installing, servicing, and maintaining HVAC and refrigeration systems in diverse environments. The ideal candidate has strong technical knowledge, a proactive work ethic, and a focus on safety and customer satisfaction. Key Responsibilities Install, repair, and maintain HVAC and refrigeration systems, including furnaces, AC units, walk-in coolers, freezers, and ventilation equipment Diagnose and troubleshoot mechanical, electrical, and refrigeration-related issues Perform routine inspections, preventive maintenance, and tune-ups Interpret blueprints, wiring diagrams, and technical manuals Ensure compliance with HVAC/refrigeration codes and safety standards Document service work, materials used, and job status in service reports Communicate system issues and solutions clearly to customers Maintain service vehicle, tools, and equipment Respond to emergency calls and participate in on-call rotation as needed Qualifications High school diploma or equivalent (technical school or HVAC certification preferred) EPA Section 608 Certification required Refrigeration experience (residential and/or commercial) is a must Minimum of 3 years of HVAC/refrigeration service and installation experience Strong understanding of mechanical, electrical, and refrigeration systems Valid driver’s license with a clean driving record Excellent diagnostic and customer service skills Ability to work independently and manage time efficiently Able to lift 50+ lbs and work in varied environments (rooftops, tight spaces, etc.) Benefits Competitive pay based on experience Health, dental, and vision insurance 401(k) with company match Paid vacation and holidays Company-provided vehicle, tools, and equipment Ongoing training and career development opportunities

Job Description GENERAL STATEMENT Under general supervision, the HVAC/R Maintenance Technician performs fieldwork in the installation, maintenance, modification, overhaul, service, repair of Heating, Ventilation, Air Conditioning, and Refrigeration (HVAC/R) equipment within the ASI & Beach Shops shared services scope. To be successful in this role, customer satisfaction, initiative, and expertise are needed. Additionally, the HVAC/R Maintenance Technician must be patient and possess excellent organizational and troubleshooting skills. This includes working on split systems, package terminal air conditioners (PTAC), evaporative coolers, reverse cycle A/C units, reach-in and walk-in coolers and freezers, plumbing, electrical systems, and more. ESSENTIAL DUTIES AND RESPONSIBILITIES: include the following. Other duties may be assigned. • Under general supervision, troubleshoots, repairs, and modifies electrical circuits, panels, lighting controls, and receptacles, including new branch circuits and the use of diagnostic circuit tracing equipment., • Provide customer service support during every service call., • Troubleshoot, repair, and maintain HVAC/R equipment., • Perform preventive maintenance and manufacturer warranty service., • Install, calibrate, and maintain HVAC/R equipment., • Coordinates schedule with other Facility Maintenance Technicians for on-call times and will be able respond to “after-hours” calls for maintenance assistance. Will periodically be required to work overtime as needed and determined by supervisor. Respond to emergency service calls, including nights and weekends on a rotating on-call basis., • Maintain accurate records of work performed, parts used, and service recommendations., • Communicate effectively with customers, coworkers, and internal dispatch teams., • Participate in ongoing technical training and safety programs., • Under the direction of a supervisor, facilitates special projects with outside contractors, including job walks, contractor coordination, project scheduling, and oversight., • Ensure installations, repairs, and maintenance are performed with quality and meet health and safety, as well as environmental protection, requirements., • Drives company vehicles as needed or directed by supervisor for organizational needs. May be called upon to use a forklift, aerial lift, or electric cart to complete duties., • Performs assigned general repairs and preventative maintenance, provides occasional support for general facilities maintenance through inspection and upkeep of building systems, equipment, and finishes across multiple trades, such as electrical, mechanical, plumbing, carpentry, and surface or structural maintenance, and identifies and reports special problems or conditions to the supervisor for needs assessment., • Other duties as assigned, reasonably within the scope of the job.MINIMUM QUALIFICATIONS Education and/or Experience High school diploma or equivalent with a minimum of three years of experience in repairing commercial gas, electrical, and steam equipment. Additionally, at least one year of experience specifically in the repair of HVAC/R equipment, including mechanical, electrical, plumbing, refrigeration, and boiler systems. Completion of a recognized apprentice training program in a skilled trade (e.g., electrician, refrigeration, plumbing) preferred. Training with Carrier, York, Daikin, True, Hoshizaki, and Traulsen equipment is preferred. Knowledge and Abilities Thorough knowledge of specific methods, materials, practices, and tools related to installation, maintenance, modification, overhaul, service, and repair of commercial food service equipment. General knowledge of facilities systems maintenance and repair in such areas as plumbing, HVAC, electrical, carpentry, painting, and mechanical systems. Must possess semi-skilled and basic skilled knowledge across multiple trades, general knowledge of applicable trade safety practices; working knowledge of building codes; basic knowledge of electrical theory and mechanical principles. Bilingual (Spanish/English) preferred. Ability to read, interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and blueprints. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations • Current California Driver's License and a satisfactory driving record as determined by ASI., • OSHA 10 or OSHA 30 Certification., • California Food Handler Card or the ability to obtain the CA Food Handler Card within the first 30 days of employment., • CPR/First Aid/AED certification or ability to obtain within 30 days of employment., • CFESA Certification (preferred)., • EPA Universal Refrigerant Technician Certification (preferred)., • State Refrigeration Licenses (preferred).OTHER QUALIFICATIONS Applicants must be at least 18 years old and willing to travel and work independently. Schedule Shift schedule may include evenings and weekends. Availability for on-call and emergency service rotations is required. Background Check Appointment to this position is contingent upon successful completion of a comprehensive background check based on reportable last actions. Mandated Reporter The person holding this position is considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand for extend periods; walk throughout the facility; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee is frequently required to utilize sense of smell. The employee is occasionally required to sit for extended periods. The employee must frequently lift and/or move 10 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; outside weather conditions; risk of electrical shock; and vibration. The employee is occasionally exposed to wet and/or humid conditions, extreme cold, and extreme heat. The noise level in the work environment is usually moderate to loud. Note: This is a union position. Please contact Human Resources with questions. Work Schedule: The initial training period will follow a Monday–Friday schedule from 7:00 AM to 3:30 PM. After training, the regular schedule will be Thursday–Monday, 5:00 AM to 2:00 PM, with flexibility to adjust for larger projects and preventive maintenance cycles, which may require shifts such as Thursday–Monday, 9:00 PM to 6:00 AM. All schedules are subject to change based on departmental needs.

Job Description Job Title: Mobile Reefer Technician Location: Vernon, CA Job Type: Full-Time Salary Range: $35 to $44 Position Summary: Mobile Reefer Technician will support our Fleet Division. This role is ideal for a self-motivated technician who enjoys working in the field, diagnosing complex issues, and servicing transport refrigeration equipment at customer locations. Responsibilities: • Diagnose, troubleshoot, and repair truck and trailer refrigeration units, including Thermo King and related equipment., • Perform advanced diagnostics using scanners, electronic test equipment, and onboard computer systems., • Conduct preventive maintenance, inspections, and component replacements on transport refrigeration units and APUs., • Review and complete shop orders accurately while maintaining service documentation., • Identify and repair system failures, including leak detection, component removal/replacement, and Freon system testing., • Assemble, install, and replace refrigeration components using soldering, welding, and refrigeration tools., • Install new refrigeration units on trucks, trailers, and vans., • Travel regularly to customer sites to perform mobile service calls, operating company vehicles safely and within road and weather conditions., • Follow all company safety policies, DOT requirements, and auto safety regulations., • Maintain a clean, organized service vehicle and work area., • Perform other duties as assigned to support service operations. Qualifications: • Minimum age 21 years old., • Valid driver’s license with an acceptable driving record., • MInimum 2 years previous experience servicing transport refrigeration units (reefer units) is required., • Strong diagnostic and troubleshooting skills across mechanical, electrical, and refrigeration systems., • Ability to work independently in a mobile service environment., • Comfortable using diagnostic tools, scanners, and electronic testing equipment., • Experience with soldering, welding, and refrigeration equipment is preferred., • Ability to lift, bend, stand, and work in varying weather conditions., • Strong attention to detail and commitment to quality workmanship. About Sonsray: Sonsray moves mountains for the construction, transportation, and agriculture industries. We are the West Coast's largest Thermo King & CASE dealership, offering sales, parts, service, rental, and leasing. We are committed to fostering a supportive and dynamic work environment. Why work here? At Sonsray, we value all employees, their contributions, and most importantly, their ideas! We know that the key to moving mountains is teamwork. This is what we offer our team members: • Medical coverage (PPO + HSA options), • Dental, Vision, and Life insurance provided at no cost, • 401K with competitive employer contributions, • 80 hours of annual vacation, increasing with years of service, • Uniforms provided annually, • Annual boot voucher of $125.00, • One full paid day off annually for community volunteer work, • Birthday meal provided by Sonsray, • Privately owned and operated, with decisions made based on core values rather than corporate directives, • Annual Holiday Party, including covered airfare and hotel for employees and a guest, • Emphasis on company growth and employee development, • Open-door policy, fostering a collaborative environment with active owner and management involvement https://sonsray.com/about/sonsray-video-gallery/ Questions? Contact us at Recruiting@Sonsray.com or 323.319.1900 Ext 1830 Privacy Notice to all California Job Applicants Regarding the Collection of Personal Information.

Job Description Job Title: Reefer Technician Location: Vernon, CA Job Type: Full- Time Salary Range: $35 to $44 based on experience Position Summary: We are seeking a skilled Reefer Technician to support our Fleet division by diagnosing, repairing, and maintaining transport refrigeration systems on trucks, trailers, and related equipment. This role ensures equipment reliability and compliance through preventive maintenance, accurate diagnostics, and quality repairs. The ideal candidate has hands-on experience with Thermo King, Carrier, or similar systems, is comfortable using diagnostic tools, and can work independently in a fast-paced, safety-focused environment. Responsibilities: Diagnosis & Repair: • Troubleshoot, diagnose, and repair components of truck, trailer, V-series refrigeration units, gensets, and APUs., • Identify and repair failures, including removing, replacing, and testing components with a multi-meter., • Address freon leaks, which involves assembling, installing parts, soldering, and utilizing specialized refrigeration equipment. Maintenance & Installation: • Perform preventive maintenance, component replacement, and service of refrigeration equipment., • Maintain transport refrigeration systems on trucks, trailers, APUs, V-series units, gensets, and buses using scanners, electronic test equipment, and onboard computers for diagnostics., • Install new Thermo King units on trailers, trucks, V-series units, and APUs as required. Documentation & Communication: • Maintain accurate records of transport refrigeration unit services on trucks, trailers, APUs, and gensets by reviewing shop orders and preparing estimates., • Document the details of repairs needed or completed. General Duties: Perform other duties and functions as directed by management to support the dealership's objectives. Qualifications: • 3- 5 years’ experience diagnosing and repairing Thermo King, Carrier, APUs, gensets, and V-series units., • Skilled in using diagnostic tools, scanners, and multi-meters., • Knowledge of freon systems, leak detection, soldering, and refrigeration component replacement.Able to perform preventative maintenance, installations, and accurate repair documentation., • EPA 608/609 certification preferred (or willingness to obtain)., • Ability to lift up to 50 lbs and work in shop/outdoor conditions., • Basic computer literacy for diagnostics and repair logging. About Sonsray: Sonsray moves mountains for the construction, transportation, and agriculture industries. We are the West Coast's largest Thermo King & CASE dealership, offering sales, parts, service, rental, and leasing. We are committed to fostering a supportive and dynamic work environment. Why work here? At Sonsray, we value all employees, their contributions, and most importantly, their ideas! We know that the key to moving mountains is teamwork. This is what we offer our team members: • Medical coverage (PPO + HSA options), • Dental, Vision, and Life insurance provided at no cost, • 401K with competitive employer contributions, • 80 hours of annual vacation, increasing with years of service, • Uniforms provided annually, • Annual boot voucher of $125.00, • One full paid day off annually for community volunteer work, • Birthday meal provided by Sonsray, • Privately owned and operated, with decisions made based on core values rather than corporate directives, • Annual Holiday Party, including covered airfare and hotel for employees and a guest, • Emphasis on company growth and employee development, • Open-door policy, fostering a collaborative environment with active owner and management involvement https://sonsray.com/about/sonsray-video-gallery/ Questions? Contact us at Recruiting@Sonsray.com or 323.319.1900 Ext 1830 Privacy Notice to all California Job Applicants Regarding the Collection of Personal Information.

Job DescriptionIf you’re a problem-solver with a can-do attitude and a proven record of experience in the field, you might be perfect for our HVAC service technician position. Our growing HVAC company needs a service tech to meet clients at their home or place of business to troubleshoot, diagnose, and fix HVAC equipment. Strong interpersonal skills are a must in this dynamic role. You have the technical skills to identify HVAC problems, and the communication skills to explain what needs to be repaired, installed, or replaced, and why. If this sounds like the perfect fit for you, apply now!Compensation: $80,000 Responsibilities: • Perform maintenance and installation of HVAC equipment in homes and businesses, • Maintain records of completed projects and parts used, • Quote customers for the costs of HVAC repairs, replacements, and services, • Test newly installed components to ensure proper function, • Fulfill preventative maintenance and warranty services for customers Qualifications: • Ability to lift 50 lbs or 100 lbs with aid, • Must have valid driver’s license and clean driving record, • Must have EPA 608 refrigerant recovery certification, • Attended HVAC school for degree or has a minimum of 1+ years experience in the field as an HVAC helper or equivalent, • We require candidates have a high school diploma or GED About Company Southwest Mechanical, Inc. (SWM) is a full-service mechanical contractor based in Southern California, specializing in HVAC, plumbing, boiler and hot water systems, electrical services, energy management, and general contracting.

Job DescriptionCarter Services is hiring an experienced full-time Commercial Refrigeration & HVAC Technician! We're a leader in residential and commercial trade services, and we're looking for the right person to help service all kinds of heating, refrigeration, and air conditioning systems/equipment.Location: Torrance, CA, serving the South BayPay: $27.00 - $35.00/hour (based on experience/qualifications)Benefits & Perks: 100% paid health insurance, 7 paid holidays, paid time off (PTO), a 401(k), and a profit-sharing plan. Plus, our Commercial Refrigeration & HVAC Technician can earn incentives for selling upgrades and additional services.Ready to take your skilled trade career to the next level and grow with one of the best teams in the business? Keep reading to learn more!What You'll Bring:EPA universal certification3+ years of commercial HVAC/R field service experienceExcellent electrical and mechanical troubleshooting skillsAttention to detail with the ability to read and interpret schematicsPhysical ability to lift 50 lbs., climb ladders, and work in various weather conditions/temperaturesEffective, professional English communication skills (verbal/written) and customer service skillsValid driver's license and a clean driving record (no major violations)Our ideal Commercial Refrigeration & HVAC Technician has experience creating job records, generating estimates, and invoicing customers through ServiceTitan (or a similar CRM), but it's not required if you're willing to learn.Commercial Refrigeration & HVAC Technician Responsibilities:You'll travel to locations throughout the South Bay to expertly inspect, diagnose, and service clients' heating, air conditioning, and refrigeration systems. This includes walk-in coolers, ice machines, rooftop units, and more. While on-site, you'll communicate with customers about their needs, troubleshoot mechanical and electrical issues, and perform safe, compliant repairs and maintenance services. You'll keep track of the work you perform and the parts you use to support accurate billing and cost-tracking. As a professional representative of our company, it's vital that you deliver quality work, treat every customer respectfully, and maintain an organized, well-stocked work vehicle.Ready to Join Us?Our company was started in 1974 and is completely family-owned. We began as an appliance service company and have expanded into a one-stop company providing plumbing, electrical, air conditioning, heating, vent cleaning, commercial refrigeration, and comprehensive appliance repair and maintenance services. Carter Services is based in Torrance, California, and serves Orange County, the South Bay, Los Angeles, and beyond.The motto, "Quality you deserve. People you trust," is at the core of all we do and the foundation of our success. Not only do we strive for long-term relationships with our clients, but we also desire long-term relationships with our team members. We truly care about our employees, helping them reach and exceed their career goals. It's also important to us that our employees thrive outside of work, which is why we provide competitive compensation and excellent benefits.Join us by filling out our short initial application!Must have the ability to pass a background check and drug screening test.

Job Description Overview At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: Competitive pay from $28.00.00- $45 hourly DOE! and up to 3K sign on bonus DOE!, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K)., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications • 3+ years of commercial experience as an HVAC and Refrigeration Technician, • Active EPA Certification, • Valid driver's license, • Excellent customer relations and interpersonal skills, • Mechanical aptitude and troubleshooting skills, • Ability to safely lift up to 50 lbs., climb and balance on a ladder, and work in elevated/high locations.

Job DescriptionBenefits: • Bonus based on performance, • Company car, • Competitive salary Benefits/Perks • Flexible Scheduling, • Competitive Compensation, • Career Advancement OpportunitiesJob Summary: We are looking for an Apprentice Service Technician to join our team! Pay range is $22 to $28 an hour with unlimited earning potential. In this role, you will be put through a world class training program with an assigned mentor. You will be trained in installing, servicing, and repairing heating and air conditioning systems in residences establishments. You must be currently enrolled in an HVAC program or have prior HVAC experience. A positive attitude is a must! Join an amazing culture with unlimited career potential within our organization Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Establish customer rapport to ensure the highest levels of satisfaction, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiringQualifications:, • Past experience as an HVAC service technician or comparable education, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 pounds

Job Description If you’re an experienced HVAC Service Technician and one of your favorite parts is seeing a satisfied customer, we have an immediate opening for an HVAC Technician. This is a customer-facing, residential service role where you’ll meet the customer in their home, complete the necessary repairs or maintenance, and talk with them about recommended solutions. You will succeed here by providing a world-class experience and caring about the customer's needs. At Aire Serv, we’re known for our excellent customer service, professional image, and Done Right Promise. We’re looking for someone who can live up to our high standards of service and professionalism. If that’s you, apply today, and someone from our team will respond within 24 hours. Why You’ll Want to Join Our Team Here are just a few of the benefits you’ll receive when joining us at Aire Serv as an HVAC Service Technician: · Paid training at our company facility, manufacturer’s facilities, and corporate office – we cover travel, meals, lodging & all training • Branded company van, • iPad loaded with all the apps and forms you’ll need, • Uniforms provided with laundry service, • Paid time off the first year with increases each year, plus paid holidays, • Year-round employment, • Additional earning potential with spiffs, commission, and bonuses for performance, • Career path based on your goals and aspirations, • On-Site Shower Benefits & Pay The pay range for this position is $25 to $35.00, and depends on your experience and knowledge as an HVAC service technician. Your Responsibilities as an HVAC Service Technician As an HVAC Service Technician, you are vital in taking care of our clients by providing them with the highest-quality service and maintenance of their home’s HVAC systems. • Deliver World-Class Service – Deliver an amazing experience for our customers., • Troubleshoot and Provide System Maintenance – Consult with clients regarding their heating and air conditioning systems, understand their concerns, and diagnose and fix the issue correctly., • Advise on System Upgrades, Improvements, and Service Plans – Help customers uncover additional opportunities and needs related to their home comfort and air quality while offering your expert recommendation for the best solution. What We Want from You • Culture alignment, • Rockstars only, • Bought into the vision, • Positive outlook on life, • Love helping people Job Requirements These are the minimum requirements to be considered for this position. • Experience in residential and/or commercial HVAC, • Valid driver's license and clean driving record, • Ability to lift 60 lbs., • Excellent communication skills with customers and office team, • Professional appearance and personality, • Be Organized To Succeed in this Role We employ a front-line service system that, when followed, will consistently generate 5-star reviews. The office team has your back and will ensure you have sufficient time with each customer to do a thorough and complete job. You are willing to take on the hot attics and crawl spaces to get the job done. And you are willing to take the time to explain things to the customer in a way they will understand. You are committed to continued training, taking advantage of company-provided opportunities, and investing time into your personal and professional development. How We’ll Measure Performance Here are some ways we’ll measure your performance in the role. • Punctuality, Reliability, and Availability – These things impact our customers and the rest of the team., • Quality of Work – The work must be done correctly the first time., • Efficiency – Doing the job well and promptly are critical to success in this role., • Customer Satisfaction – You will be responsible for delivering an amazing customer experience and ensuring high customer satisfaction., • Key Service Metrics – We use a scorecard system so that you have clear goals that you are confident you can achieve and will know exactly how you are performing. How to Know If This is the Job for You • You are team oriented. When you join Aire Serv as an HVAC technician, you will be part of our local team and a larger community of like-minded service technicians., • You love a smooth process. Our HVAC techs follow our Aire Serv process, ensuring a consistent and amazing experience for our clients, while growing their income and career., • You empathize with the customer. You understand what a customer is going through and show that you care by listening to their concerns. You walk them through their options in a way that the customer understands. You are there to help today and in the future. We’re looking to hire only the best. So if that’s you, apply today. If you meet the requirements for the position, our system will schedule you for an interview immediately

Job DescriptionDescription: Job Title: HVAC Technician Supervisor: Service Manager Hours: Full-Time, OT when needed Schedule: M-F, Rotating weekends and on call Exempt / Non Exempt : Non Exempt/hourly Salary/ Rate of Pay: $20+ DOE DUTIES AND RESPONSIBILITIES: • Inspect, repair, modify and install HVAC equipment including refrigeration and air conditioning compressors, receivers, condensers, chillers, water cooling towers, forced air converter units, pumps, automatic and hand valves, expansion valves and capillary tubes., • Conduct regular preventive maintenance inspections of refrigeration units, isolated heating and ventilating units, including boilers, gas and electrically operated air conditioning equipment, and make necessary adjustments or repairs; service and repair evaporative coolers., • Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls, safety valves, and automatic gas valves., • Operate a variety of hand and power tools, welder torch, vacuum pump, test equipment utilized in the trade and a motor vehicle; maintain equipment in effective and safe working condition; maintain parts and tool inventory., • Repair and rebuild semi-hermetic reciprocating compressors and compressors for centrifugal refrigeration machines., • Perform skilled electrical maintenance work in the repair, installation and alteration of HVAC equipment, components, timers, motors and wiring systems as needed; connect motors to control panels., • Test and examine boiler operations, observing meter and pressure gauges; conduct boiler water quality test and treatment; adjust boiler burner combustion., • Lubricate and pack heating, ventilation, refrigeration, and air-conditioning motors, pumps, fans, and other equipment., • Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of refrigeration and air conditioning systems; flush boilers, descale tubing; rebuild pressure and temperature safety valves and water pumps., • Install, rebuild, replace or repair fans, motors, thermostats, fuses, filters, bearings, valves, controls, gaskets and other equipment as necessary., • Maintain related records concerning time, labor and materials; maintain log of, • tasks performed and write reports as required., • Perform other duties as assigned., • Maintain regular attendance. KNOWLEDGE AND ABILITIES: KNOWLEDGE OF: • Standard practices of the HVAC and refrigeration trade., • Theory of HVAC and refrigeration systems., • Materials, methods and tools used in the operation and repair of HVAC and, • refrigeration systems., • Applicable building codes, ordinances and regulations of State and local, • authorities pertaining to HVAC, refrigeration and boilers., • Air compressors and pneumatic controls., • Cooling tower and boiler water treatment., • Manual and electrical tools and equipment applicable to the HVAC and, • refrigeration trade., • Welding and soldering techniques., • Health and safety regulations., • Basic record-keeping techniques., • Proper methods of storing equipment, materials and supplies. ABILITY TO: • Perform skilled mechanical maintenance duties in the inspection, repair,, • installation and alteration of District heating, ventilation, air conditioning and, • refrigeration systems and related equipment and facilities., • Calibrate systems., • Perform preventive maintenance and routine servicing of equipment., • Diagnose defects, and install, repair and maintain heating, ventilating, refrigeration,, • and air-conditioning units., • Follow oral and written instructions., • Operate specialized machinery, equipment and tools utilized in the repair,, • installation and maintenance of heating, ventilation, air conditioning and, • refrigeration systems., • Communicate effectively both orally and in writing., • Understand and follow oral and written directions., • Work cooperatively with others., • Work independently with little direction., • Meet schedules and time lines., • Maintain routine records and prepare reports., • Routinely lift objects weighing up to 75 pounds., • Lift heavy objects. PHYSICAL DEMANDS: • Work is performed while standing, sitting, and/or crouching for full shift., • Requires the ability to communicate effectively using speech, vision and hearing., • Requires the use of hands for simple grasping and fine manipulations., • Requires bending, squatting, crawling, climbing, reaching., • Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds., • Requires the ability to go up and down ladders, stairs, emergency exits etc., multiple times a day., • Requires activities involving being around moving machinery, exposure to marked changes in temperature and humidity, and exposure to dust, fumes and gases.Requirements:

Job Description Support Technician - Bilingual (English / Spanish) Substance Use Disorder Treatment Basic Function • The basic function of the Support Technician is to ensure the safety of every client, and to provide leadership and supervision to clients. Responsibilities and Duties • Ensure that clients report to their respective groups on time., • Supervise and direct clients in the performance of their job assignments., • Actively check on clients’ completing their assigned tasks., • Complete all necessary documentation, including observation logs, maintenance reports, incident / information reports, urinalysis reports, and other reports as assigned., • Complete a discharge form for clients who are discharging, and forward the discharge information to all appropriate parties., • Conduct routine urinalysis drug testing, skin checks, no-contact personal searches, eye checks, and searches of clients and their belongings., • Attend shift change meetings and stay informed of activities occurring on your shift, i.e. new clients, discharges, illnesses, emergencies, etc., • Read all communications to the Support Technicians, and review communications., • Stay current on policies and procedures., • Chart on at least three clients per shift., • Tour the facility on a continual basis, ensuring that a clean, safe environment is maintained and report all issues that might compromise the maintenance of a safe, secure and clean facility to the Chief Support Technician., • Perform other tasks as assigned by supervisors. Skills And Knowledge Required • Must have excellent written and oral communication skills, • Must have excellent time management skills, • Bilingual (English / Spanish) Education / Training • Must have high school diploma, or equivalent, • Must provide CPR / First Aid Training certification within 30 days of hire, • Must be registered or certified with CCAPP, CAADE or CADTP Experience • No experience necessary. Special Conditions • Must be willing to undergo random drug screenings. Working Conditions • Frequently ascend and descend stairs., • Frequently remain in stationary position, standing and / or sitting for 6-8 hours., • Frequently crouch below the waist and / or above the shoulders., • Constantly lift and / or move objects up to 25 lbs., • Constantly push and / or pull objects up to 50 lbs., • Frequently operate motor vehicles., • Occasionally work at various locations across Los Angeles County. POSITION REPORTS TO Chief Support Technician PAY RANGE • $23 - $25 / Hour Benefits: • 100% Employer Paid Health insurance, • 80% Employer Paid Dental Insurance, • Vision Insurance, • 10 Paid Sick Days / Year, • 11 and 1/2 Paid Holidays / Year, • 1 Week Vacation First Year / Progressively more with Years of Service, • 401(k), • 401(k) matching, • Employee assistance program, • Flexible schedule, • Life insurance

Job Description Job Title: Plumber Apprentice / Laborer Location: Sun Valley, California (Los Angeles County) Job Type: Full-Time Department: Plumbing Reports To: Master Plumber Technician / Foreman Position Summary: We are currently seeking a motivated and hardworking Plumber Apprentice / Laborer to join our team. This is an excellent opportunity to gain hands-on experience in the plumbing trade, working alongside experienced professionals on residential, commercial, and/or industrial projects. The ideal candidate will have a strong work ethic, a willingness to learn, and a commitment to safety and quality. Key Responsibilities: Assist licensed plumbers with the installation, maintenance, and repair of plumbing systems Carry tools, materials, and equipment to and from job sites Perform basic labor tasks such as digging trenches, cutting and fitting pipes, and cleaning up job sites Learn to read blueprints and technical drawings Follow all company safety policies and procedures Maintain tools and equipment in good working condition Communicate effectively with team members, plumber tech and supervisors Qualifications: High school diploma or GED preferred Prior construction or plumbing experience is a plus but not required Valid driver’s license and reliable transportation Ability to lift 50+ lbs and perform physical labor in various weather conditions Strong mechanical aptitude and eagerness to learn Must be punctual, dependable, and safety-conscious Enrollment or willingness to enroll in a registered plumbing apprenticeship program (as required) What We Offer: Competitive hourly wage based on experience On-the-job training and mentorship from experienced plumbers Opportunities for advancement and career growth Health, dental, and vision benefits 401(k) plan Life Insurance provided by our company Safe and respectful work environment Pay Information: Hourly Rate: $18.00 – $21.00 per hour Pay is based on experience, skills, and qualifications. Candidates with previous plumbing, construction, or general labor experience may be eligible for a higher starting rate within the range. Regular performance reviews and opportunities for wage increases are provided based on job performance, reliability, and skill development. Work Schedule: Typical Hours: Standard business hours (Monday–Friday, approximately 7:00 AM – 5:00 PM) Schedule May Vary: Depending on project needs, including nights, early mornings, or weekends Open availability is required While most work will be performed during regular daytime hours, some jobs may require overnight or off-hours work to meet deadlines, access job sites, or minimize disruptions to clients. Flexibility and a willingness to work varied shifts are essential for this role. If you feel you fit this role, we invite you to apply and submit a thorough resume with all skills and experienced listed. Team Rooter Plumbing looks forward to hearing from you!

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Free uniforms, • Paid time off, • Training & development Swimming Pool Service Technician - $2528/hr + Bonuses + PTO (Los Feliz /Hollywood Hills / Hollywood) Were a well-established, family-owned swimming pool service and repair company in Los Angeles, proudly serving the area since 1981. Were known for our professional standards, strong team culture, and organized systems that make your workday smooth and efficient. Were currently hiring a full-time Pool Service Technician to join our team. Whether youre experienced or brand new to the industry, well provide the training and support to help you succeed. JOB RESPONSIBILITIES: Weekly maintenance of residential swimming pools Testing and balancing water chemistry (LSI-based) Equipment inspection, maintenance, and troubleshooting Communicating with clients and reporting repair needs Following route schedules and logging service details REQUIREMENTS: Your own insured pickup truck (this is required) Valid drivers license Reliable and self-motivated Able to lift 50 lbs and work outdoors Willing to learn and work well with a team PAY & BENEFITS: $25/hr during training $28/hr after training Mileage reimbursement 1 week paid vacation (ChristmasNew Years) 2nd week after 1 year, 3rd week after 2 years 5 PTO days/year (start accruing after 90 days) Summer bonus + Christmas bonus Uniform provided Weekends off + your birthday off WHY TECHNICIANS STAY WITH US: We offer a friendly, supportive work environment with clear systems and a strong sense of team. Most of our guys stick around because we stay organized, treat people with respect, and make sure everyone is set up to succeed. LOCATIONS: We are hiring for service routes in Los Feliz, Silverlake, Hollywood, Hollywood Hills, and West Hollywood. APPLY TODAY! Send us your name, contact info, a quick summary of your work experience, and your availability to start. Well be in touch to set up interviews right away.

Job Description PLUMBER (ID# 647) JOURNEYMAN & APPRENTICE LEVEL PLUMBERS CAN APPLY FULL TIME POSITION - PAY BASED ON EXPERIENCE Location: Anaheim, CA; South Lake Tahoe, CA; North Central San Diego, CA; Carson City, NV; Reno Tahoe, NV; Salt Lake City, UT; Kennewick, WA; Woodinville, WA; Seattle, WA; Wenatchee, WA; Yakima, WA; Concord, CA; Tacoma, WA; Oahu, HI; About Our Client Our Client is a nationally recognized residential and commercial plumbing services company committed to delivering fast, reliable, and professional plumbing solutions. With a team of expert technicians across the country, we take pride in exceptional workmanship, transparent pricing, and outstanding customer service. Join a growing company that values its people and invests in their success. Position Overview We are seeking a skilled Plumber to join our team. The ideal candidate is a dedicated professional who takes pride in quality craftsmanship, communicates effectively with customers, and thrives in a fast-paced service environment. You will be responsible for diagnosing, repairing, installing, and maintaining plumbing systems in residential and commercial properties. Key Responsibilities • Install, repair, and maintain pipes, fixtures, water heaters, sump pumps, and other plumbing equipment, • Diagnose and troubleshoot plumbing issues including leaks, clogs, and pipe damage, • Perform drain cleaning, hydro-jetting, and sewer line inspections, • Install and repair bathroom and kitchen fixtures including sinks, toilets, faucets, and showers, • Respond promptly to emergency service calls and provide timely solutions, • Read and interpret blueprints, schematics, and building codes to ensure compliant installations, • Perform water heater installations and repairs (traditional and tankless units), • Detect and repair gas line issues in compliance with local codes and safety standards, • Collaborate with other tradespeople on new construction and renovation projects, • Maintain accurate records of work performed, parts used, and time on job, • Communicate professionally with customers, explaining issues and recommended solutions, • Maintain a clean, organized work vehicle and inventory of suppliesRequired Qualifications, • Valid state plumbing license (where required), • Minimum 2+ years of hands-on plumbing experience in residential and/or commercial settings, • Valid driver's license with a clean driving record, • Strong working knowledge of local, state, and national plumbing codes, • Ability to lift up to 50 lbs and work in confined spaces or at heights, • Proficiency with hand tools, power tools, and diagnostic equipment, • Strong customer service and communication skills, • Ability to work independently and manage time effectivelyPreferred Qualifications, • Experience with service and repair (not just new construction), • Familiarity with plumbing software or CRM scheduling systems, • OSHA 10 or OSHA 30 certification, • Bilingual (English/Spanish) is a plus What We Offer, • Competitive hourly wage or salary based on experience and location, • Health, dental, and vision insurance, • Paid time off (PTO) and paid holidays, • 401(k) with company match, • Company-provided vehicle, tools, and uniforms, • Ongoing training and professional development opportunities, • Performance bonuses and incentive programs, • Opportunities for advancement into lead technician or management roles

Job DescriptionDescription: Job Title: Commercial Pool Technician Territory: Miami / Ft Lauderdale Territory Reports To: Account Manager Supervises: N/A Job Classification: Full-Time, Hourly, Non-Exempt Salary Range: The salary range for this position is $25-$35 per hour, and is dependent on multiple variables, including location, experience, and territory. This position is temporarily remote; Position will be in-office in the future. SUMMARY OF ESSENTIAL DUTIES AND RESPONSIBILITIES The main role of the Commercial Pool Technician is to provide technical expertise, training, and support for existing and prospective clients. Additionally, the daily role will be to visit clients per schedule, perform diagnosis, repair, and replacement of commercial aquatics equipment, test water chemistry, adjust controllers and programming, clean and maintain chemical feed equipment, as well as performing pump room inspections and submitting work orders for all issues found in pump rooms and/or equipment. Key Responsibilities Include: • Onsite visits to new and existing clients on a regular basis, • Train clients, channel partners, etc. on chemical feed systems and VivoPoint software, • Provide technical support, repair, and installation of VivoPoint chemical feed systems, including controllers, modems, feed devices, tubing, injectors, etc., • Provide technical support and perform installations, repairs, and maintenance on pumps, filters, heaters, etc., as needed, • Perform warranty repair and required maintenance of VivoPoint chemical feed systems, • Provide regular chemical water tests and recommendations to clients, • Take photo documentation of job sites, projects, and work completions as requested, • Provide material and labor cost estimates for repairs and installations as requested, • Record all service visit information on VivoPoint via entering manual readings, entering/updating service orders, and completing equipment profiles, • Record detailed notes on all service visits in NetSuite, • Communicate visits, repairs, and follow up information to supervisors in a timely manner, • Must wear appropriate PPE at all times, • Must communicate any needs for specialty tools, PPE, training, or support to managers immediately upon discovery of need, • Perform regular inventory of parts and equipment within your possession as requested, • Communicate with managers and billing department regarding job and project completions and parts used in a timely manner, • Must be able to gather parts and equipment from supply houses and other locations as requested, • Attend meetings, trainings, and company gatherings as needed, • Additionally, duties may be assigned based on changes in client needs and in company needs and services offered Requirements: QUALIFICATIONS • Excellent interpersonal communication skills, • Must maintain the highest level of professionalism at all times: must maintain a professional appearance, and must have a friendly and professional attitude, • Must possess high organizational skills and be detail oriented, • Maintain a strong work ethic, be self-motivated, and have a high sense of responsibility, • Strong computer skills in MS Office (Email, Word, Excel, Calendar), GSuite (Gmail, Google Sheets, Google Docs, Calendar), or similar., • Strong knowledge of commercial water chemistry and balancing water chemistry, • Strong knowledge of various manufacturers’ circulation and filtration systems and chemical automation systems and chemical feed devices, • Exceptional knowledge of swimming pool regulations and codes, • Ability to travel off-island and overnight when needed, • Ability to work nights and weekends as needed, • Experience and first hand knowledge of electrical and plumbing systems and use of power tools, • Must be able to lift, move, and carry up to 75lbs SUPERVISORY RESPONSIBILITIES • N/A EDUCATION and/or EXPERIENCE • 2+ years of experience in the aquatics industry required, • 2+ years of technical work experience with commercial aquatics that includes experience with water chemistry and balancing, electrical and plumbing systems, • 2+ years of technical work experience with installing, repairing, maintaining commercial circulation and filtration systems and chemical automation and chemical feed devices, • Currently or previously held CPO license preferred, • Valid driver license that has been valid for at least the last 2 years, • Must be over the age of 21, • Ability to communicate effectively in English. Bilingual (Spanish) a plus!, • Successfully pass a thorough background check, including a DMV/driving record check

Job DescriptionAre you passionate about ensuring crystal-clear pool experiences for clients? We are seeking a dedicated and skilled Pool Technician to join our team. Position Overview: • As a Pool Technician, you will be responsible for servicing and maintaining pools to the highest standards, ensuring that our clients can enjoy a clean and safe swimming environment., • Working Hours: Monday - Friday (Some Saturday's). Responsibilities: • Conduct routine pool maintenance, including water testing, chemical balancing, and equipment inspections., • Light Troubleshooting and repair pool equipment such as pumps, filters, heaters, and automated control systems., • Keep accurate records of services provided and maintain a well-organized schedule., • Stay updated on industry best practices and advancements in pool technology. Requirements: • Previous experience in pool maintenance or a related field is preferred, but we offer training for motivated individuals., • Knowledge of pool chemistry, filtration systems, and equipment troubleshooting., • Ability to work independently and efficiently manage time., • Excellent communication and customer service skills., • Physical ability to lift and carry equipment and perform manual labor as needed., • Flexibility to work Monday through Saturday., • Valid CA Driver’s License. Compensation: • Pay will be discussed upon interview., • Our company offers opportunities for advancement and increased pay based on experience and performance., • We also offer benefits, Paid Time Off (PTO), Holiday Pay, Medical insurance, and Life insurance., • We provide a work truck and all necessary equipment to ensure you have the tools needed to excel in your role. If you are a reliable and motivated individual with a passion for maintaining pools at their best, we invite you to apply. Join our team and contribute to creating enjoyable and safe swimming environments for our valued clients. To apply, please submit your resume and a brief cover letter outlining your relevant experience to office@poolandspabuildersinc.com. We look forward to welcoming a new member to our team!

Job Description Who We Are Synergy Companies help to provide no-cost energy-saving programs to applicants of the local public utilities. We are a subcontractor for the local natural gas, electric, and water utility companies of Southern California. We have teamed up with these utilities to provide their customers with measures/items that we install to reduce the home's electricity or natural gas usage. Synergy Companies has over 40 years of experience working with these utility companies. If you're looking to join a team that has a great work environment, competitive pay, and health benefits and is constantly evolving to accommodate new and improved technological advances to residential homes and businesses, Synergy Companies is the future for you! Job Description Synergy Companies is looking for a Tankless Water Heater Technician to join our team. Synergy Companies works with Southern California utility companies to install water heaters at low or even no cost for our customers. Candidates with experience in plumbing and electric work are preferred but not required. We are looking for motivated people who enjoy working with their hands. Individuals who are able to problem solve and think for themselves are a great fit for this position. This position will include steady, year-round employment. Working full-time you can expect to make $80,000 + in this position. Duties/Expectations: • Willing to learn and follow instructions, • Attend company meetings as required, • Be responsible for company equipment and vehicle, • Provide top-quality customer service, • Be comfortable with selling additional upgrades to the customer, • Physically able to lift and move equipment, • Willing to work with hands, • Being on time for scheduled appointments and meetings Skills/Qualifications: • Pass Drug and background screening, • High school graduate or GED, • Competent in working with your hands and power tools, • Customer etiquette and communication, • Problem-solving, • Tech savvy (comfortable with computers, tablets, cell phones, and Google based programs), • Valid Driver's License and good Driving Record, • Able to work both independently and as part of a team, • Bilingual a plus Benefits Include: • Paid training, • All equipment and tools needed for the job are provided, • Vehicle and fuel card provided, • Health benefits available for full-time employees - Employee's insurance is covered with the option of family coverage to be added at the employee's expense, • Paid vacation after 1 year of full-time employment, • Company 401k matching plan available after 1 year of employment, • Ongoing training, incentives, and career development, • Overtime Available

Job DescriptionDescription: Lead Commercial Service Technician / Plumber JP Prime Inc. is looking to hire experienced Commercial Service Plumbers, and we are interested in you! We are a rapidly growing and expanding commercial plumbing company and pride ourselves on hiring and retaining the most qualified and best commercial service plumbers in the business. Advancement opportunities and continuous training will also be available for the individuals who wish to strive for more. At JP Prime Inc., we have core values that are our trademark in the industry, which shows that we are committed to providing the best quality work and great customer service to our clients. We offer an hourly pay program with huge earning potential, with steady work, and the opportunity to make great money performing the trade you take pride in. Qualifications and Responsibilities: • 5+ years’ experience as a Commercial Service Plumber, • Lives in the Orange County Market, • Must have experience performing Commercial Plumbing Service work in office buildings, medical and healthcare facilities, industrial and manufacturing facilities, distribution/fulfillment centers, etc., • Ability to troubleshoot, repair and replace plumbing fixtures, including faucets, toilets, flush valves, instant hot water heaters, etc., • Drain cleaning and jetting experience required, • Ability to work on water, irrigation, and gas piping, including PVC, copper, black pipe, and galvanized pipe, • Experience working on pump systems, including recirculation pumps, booster pumps, and sump pumps (duplex and triplex systems), • Ability to troubleshoot and repair commercial application water heaters and/or boilers, • Must be able to safely operate a service truck, which must be stored at home in a safe area such as home driveway or garage (no street parking), • Must be able to work nights and weekends when projects require, • Experience dealing with commercial environment customers is a must, so we ask that you are personable, presentable, and professional at all times. Requirements: • High school diploma or equivalent, • Ability to lift heavy objects and work in a physically demanding environment, • Excellent communication and teamwork skills, • Willingness to learn and take direction from experienced plumbers/installers, • Valid driver's license Compensation and Benefits: • $40-45hr. depending on knowledge and experience, • Take-home company service truck, gas card, and company cell phone, • Health, dental, vision, and Aflac, • Paid time off (sick, vacation, holidays), • 401(K) options, • Eligibility for annual bonuses, • Access Perks Program benefits Requirements:

Job Description This position will serve the Beach Cities/South Bay and the surrounding area in Los Angeles*! We're open to a Drain & Sewer Technician or experienced plumber in this role. Previous experience in a customer-facing role with sales is required. At Zoom, we take great care in cultivating the careers of our employees. We offer advanced training and room for growth because we recognize that career advancement is a large part of job satisfaction. At Zoom, you’ll have the opportunity to get ahead. We’re all about training and that's what makes the difference between this being just a job and this being a career. Drain Technicians are the heroes to our customers! They go in, relate to the customer, diagnose issues, and help them get up and running again, whether it’s a clogged drain or preventative maintenance. Drain Technician Role | WHAT WE DO • Provide exceptional customer service at all times, • Identify and assess customers' needs to achieve satisfaction, • Provide multiple options to customers, • Clear drain / sewer lines that are clogged, • Perform camera and video inspections, • Perform preventative maintenance Drain Technician Requirements | WHAT YOU BRING • Experience in a customer-facing role is required. That experience should include establishing rapport with customers, assuming the sale options, and providing guidance to customers throughout projects., • Have 2+ years experience working on drains is required. That experience should include unclogging drains with electric snakes and/or high-velocity water jets and using a sewer camera to inspect drain lines., • Bring reliability, motivation, and problem-solving excellence, • Must be able to lift and/or carry up to 75 lbs; stand for extended periods of time; kneel or crouch, • Valid Driver’s License in good standing Drain Technician Benefits | WHAT WE OFFER • Bonus Opportunities, • Career Advancement, • Paid Time Off / Holidays, • Company Gatherings, • Company Mobile Phone & Tablet, • Company Supplied Uniforms, • Recognition & Rewards, • Positive Team AtmosphereSalary, • $21.00 / hourly to $27.00 / hourly, • + Bonus and Spiff Program, • More information can be found at https://zoomdraincareers.com/ *Each location is independently owned and operated Powered by JazzHR n8UTgnQVBR

Job Description Commercial Service Plumbing Technician – Take-Home Truck Included Company Name: Major Plumbing Co Inc. Location: Los Angeles, CA (Local Route — Local Technicians Strongly Preferred) Job Type: Full-Time (Guaranteed 40-Hour Work Week) Schedule: Monday – Friday (Overtime, rotating weekends, and after-hours emergency work as required) Pay Range: $75,000 – $95,000+ per year (Salary DOE) + Year-End Performance Bonus & Sign-On Bonus The Opportunity Command Major Metro Infrastructure. Secure Top-Tier Earnings and Field Autonomy. Major Plumbing Co Inc. is hiring immediately for an experienced, high-caliber Commercial Service Plumbing Technician to dominate commercial service routes across the greater Los Angeles area. Specializing in advanced commercial service, multi-site infrastructure maintenance, and complex design-build engineering solutions, our firm stands as a premier name in Southern California mechanical contracting. This is an autonomous, high-impact field service role designed exclusively for top-tier service plumbers who can diagnose complex commercial systems without constant hand-holding. If you want a secure position with consistent, year-round commercial routes, a fully equipped take-home vehicle, and an elite compensation track where your diagnostic talent is directly rewarded, Major Plumbing Co Inc. provides the definitive long-term career platform. What You Will Be Doing You will take complete on-site ownership of the diagnosis, troubleshooting, and advanced repair of commercial mechanical networks: • System Diagnostics & Repair: Investigate, isolate, and repair structural mechanical issues across complex commercial plumbing systems, institutional fixtures, high-pressure water lines, and multi-tier valves., • Sewer & Piping Overhauls: Execute precision service, heavy drain clearing, mainline jetting, structural repiping, and emergency repairs on commercial sewer grids and industrial piping infrastructure., • Client Communication: Translate intricate mechanical findings and technical repair recommendations clearly and professionally into actionable solutions for corporate property managers and facility engineers., • Route Efficiency Control: Independently manage and execute daily commercial service calls, ensuring peak field productivity and pristine digital service documentation., • Asset Stewardship: Maintain total operational readiness of a fully equipped company service truck, keeping tools organized, parts fully stocked, and electronics securely logged., • Safety Compliance Enforcer: Uphold and execute strict site safety protocols, ensuring all trenching, confined space entries, and mechanical workflows strictly comply with Cal/OSHA regulations. What You Need to Succeed (Qualifications) • Trade Foundation: Proven, extensive professional experience specializing directly in commercial or industrial plumbing service environments., • Diagnostic Command: Elite technical capability to independently troubleshoot and isolate structural, systemic plumbing failures on-site., • Safety Credentialing: An active OSHA 10 Certification is strictly required., • Licensure: A valid California Class C Driver’s License paired with a clean, insurable driving record to operate company fleet assets., • Physical Capability: High physical stamina with the capacity to lift heavy equipment, climb ladders, crawl into tight access spaces, and perform rigorous labor in demanding industrial environments. Preferred Technical Background: • Successful track record managing an independent local commercial service route., • Strong capability to read and interpret complex commercial plumbing and structural mechanical schematics., • Technical experience working inside large-scale commercial facilities, industrial plants, high-rises, or multi-site commercial footprints. Workforce & Industry Data • Strategic trade recruitment and long-term career mapping require a realistic understanding of mechanical trade demographics. According to data from the U.S. Bureau of Labor Statistics for commercial service plumbers and pipefitters:, • Gender Demographics: The plumbing and mechanical service sector remains a predominantly male trade, with men comprising approximately 98.4% of active technicians, while women represent 1.6% of the workforce., • Racial Representation: The commercial plumbing technician population reflects the following demographic distribution nationwide: White (64.3%), Hispanic or Latino (21.4%), Black or African American (10.8%), and Asian (3.5%)., • Market Traction: Commercial service technicians in the Los Angeles metro who possess high-rise facility literacy and independent route discipline represent less than 8% of the available labor pool, commanding top-tier regional compensation and bulletproof employment stability. Compensation & Premium Benefits We reward technical mastery, elite customer service, and reliable route management with a premium total rewards structure: • Top-Tier Earnings: $75,000 – $95,000+ base annual salary based strictly on your experience, with extensive overtime opportunities to easily push earnings past $100K., • Performance Incentives: Lucrative Year-End Performance Bonuses, plus Potential Sign-On Bonuses for elite, highly qualified candidates., • Financial Security: Dependable, bi-weekly payroll backed by a Guaranteed 40-Hour Work Week and a 401(k) Retirement Savings Program featuring competitive company matching., • Health & Security: Comprehensive Medical, Dental, Vision, and Life Insurance coverage options., • Work-Life Balance: Generous allocations for paid vacation time, paid sick leave, and paid company holidays., • Premium Asset Perks: A fully equipped, take-home commercial service vehicle loaded with company-provided specialty tools and advanced equipment., • Career Trajectory: Stable, year-round commercial contracts (no seasonal slow-downs) backed by continuous paid professional development and clear pathways for rapid internal advancement. About Major Plumbing Co Inc. Major Plumbing Co Inc. is a premier commercial plumbing leader serving Southern California. Our reputation is anchored by an absolute commitment to structural craftsmanship, absolute safety, and long-term professional relationships with both our clients and our technicians. We invest deeply in our field operations, ensuring our plumbers have the high-end tooling, strong dispatch logistics, and operational leadership required to build an exceptional, lifelong career. Major Plumbing Co Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, or any other status protected by applicable federal, state, or local regulations. All selection decisions are based purely on job-related factors and mechanical capabilities. Ready to dominate the LA commercial service market? Apply today.

Job Description City Rise Traffic - Traffic Control Associate: Westminster Hourly / Non-Exempt / Full Time Salary Range: $24.35 - $27.85 /hour Salary depends on Job Classification and location City Rise Traffic We are a well-established and growing company offering a competitive salary and a great benefits package for the right candidate. We service all of California from multiple locations. At City Rise Traffic, we provide high-quality traffic control safety services to construction sites, such as flagging traffic through a work site, lane closures to divert traffic, or detouring traffic to reduce traffic congestion and prevent accidents. We serve the needs of varied industries and are focused on maintaining a safe work environment for construction crews, our employees, and the public. Our focus is safety, so our customers can focus on their jobs. Brief Position Summary: A Traffic Control Associate is responsible for helping manage traffic around active work zones for road construction and utility crews. They use a paddle with "Stop" on one side and "Slow" on the other to signal drivers to slow down, stop, or proceed through the area. Often working alongside a crew leader and other technicians, they coordinate traffic flow through communication, either via two-way radios or hand signals. In some cases, they may set up barricades, cones, vehicle placements, and other devices along the roadway to enhance safety. A Traffic Control Technician must possess a valid California Driver’s License with a clean driving record. Their primary responsibility is to ensure the safety of motorists, pedestrians, cyclists, workers, and themselves while on the road. Essential Functions: • Maintain a consistent and unrelenting focus on safety throughout all job functions, • Use traffic signals/signs, traffic plans, and customer requests to safely coordinate traffic flow around the work zone, • Assist in managing day-to-day work zone set up, maintenance and tear down. Meeting or exceeding customer, state, federal regulations and company expectations, • Communicate with customers, the public, and with other team members, • Keep equipment in trucks well organized and in working order, • Develop superior knowledge of work zone setup and Professional Flagging responsibilities, • Provide the highest level of customer service to all customers. This includes on-time arrival and well managed work zones, • Recognize dangers using hearing and vision, • Handle stressful situations and take safe action to avoid serious injuries to any pedestrians, vehicles, customers, and employees, • Follow company and state guidelines for effective, safe well managed work zones, • Drive company trucks as needed, • Other duties not listed may apply Journeyman Traffic Control Technician Union Requirements: • Current LIUNA membership with journey person classification required If extensive non-union experience, City Rise may be able to help facilitate member onboarding if candidate is not already an exist member. Apprentice Union Requirements: • Current LIUNA membership with Apprentice 1-4 classification preferred City Rise may be able to facilitate member onboarding if candidate is not already an exist member. Job Qualifications: • Can establish and maintain effective working relationships with coworkers and others, • Can work independently with minimum supervision, • Strong interpersonal skills and professional demeanor, • Work in high-volume outdoor locations with multiple interruptions throughout the day, • Conflict resolution techniques, • Good customer service skills, • Multitasking, problem solving, and organizational skills, • Basic computer skills required, • Flexible Schedule, • Knowledge of the Caltrans MUTCD preferred but not required, • Can read and understand traffic control plans and permits preferred but not required, • Valid CA driver’s license with a clean driving record/insurable, • Experience driving medium duty vehicles and towing trailers, • Bilingual in English/Spanish a plus but not required Education: • High School Diploma preferred, • Minimum of 2 years’ experience in a similar role preferred, • Valid ATSSA Flagging certification. Company willing to certify in-house Physical Demands: • Lift, carry and place traffic cones to ensure the safety of the work zone. Lifting may be up to 50 lbs, • Use hands to handle, feel or reach with arms to talk, • Sit, stoop or kneel, • Lift, carry, pull, or place and assemble traffic control signs in the proper order to manage work zone traffic, • Standing/walking for long periods while flagging, in various weather conditions and different times of day/night, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Language Skills: Ability to read and comprehend instructions, correspondence, and memos. Ability to write clear instructions, explanations, and correspondence. Ability to read, understand, and implement TCPs and follow industry guidelines. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. City Rise Safety, LLC. is an equal opportunity employer and prohibits discrimination and harassment of any kind. We are committed to fostering a respectful, inclusive, and compliant workplace that values the contributions of all employees, union and non-union alike, regardless of race, color, religion, sex, gender identity, sexual orientation, national origin, disability, age, or any other status protected by applicable law. Employment is contingent upon verification of legal authorization to work in the United States and successful completion of a criminal background check, if applicable and consistent with California law, as well as any required drug screening conducted in compliance with applicable state and local laws.

Job Description Landscape maintenance technician/gardener who will drive a company truck. Candidate must be able to work as a team to provide landscape maintenance services to both residential and commercial properties. Safely operate typical maintenance equipment such as mowers, edgers, weed whackers, blowers, etc., and tools to ensure all plant materials and features are maintained. Perform all work on schedule in a timely and safe manner. Take professionalism seriously and provide an excellent representation of the company. Typical responsibilities: • Mowing and edging lawns., • Pruning shrubs and trimming hedges., • Using leaf blowers and other power equipment., • Weeding and maintaining flower beds., • Minor tree work, • Applying mulch, • Picking up trash and debris, • Fertilization, • Simple irrigation repairs, • Planting and seasonal colored flowers, • Tool maintenance and repairs, • Documentation of jobs, • Time-tracking, • Driving, • Basic Equipment maintenance, • Basic Vehicle maintenance Requirements Requirements: • Excellent customer service, • Valid California driver's license, • At least 2 years of experience in professional maintenance, • Bi-lingual English & Spanish reading and writing fluently, • At least 18 years old, • Good driving record, • Pass drug test, • Ability to use apps and software on a phone Physical Requirements: • Must have adequate hearing, speaking, and vision to clearly and safely communicate., • Must be able to critically think and problem-solve., • Must be able to prioritize and efficiently delegate work to be done on a weekly basis., • Must be able to walk at a normal pace and have all-around mobility., • Must be able to work in cold and hot conditions., • Must be able to lift at least 50 lbs comfortably., • Must be able to be on your feet for 8 hours. Benefits • Vacation Time, • Paid Sick Days, • Paid select Holidays, • Roth IRA

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Flexible schedule, • Free uniforms, • Opportunity for advancement, • Paid time off, • Training & development, • Tuition assistance Commercial Cleaning Technician Part Time Evenings Cudahy & Artesia Area. 6 days per week after 7:00 pm. $17.50 - $19.50 per hour plus Gas Allowance, Travel Time, Phone and Laundry Allowance, CalSavers Retirement Plan, Performance Incentives and Bonuses, Scholarship Program. With offices and operations across the country, Office Pride offers part-time employment opportunities for men and women who believe in honesty, integrity and a hard work ethic. Most of our employees are part-time working as a cleaning professional servicing professional buildings. Office Pride therefore offers a tremendous part-time, secondary income opportunity for people interested in a stable part-time job. Job Duties • Sweep or vacuum and damp mop hard surface floors and vacuum carpeted floors., • Dust work surfaces, other furniture, and other horizontal and vertical surfaces., • Clean restrooms including toilets, urinals, partitions, sinks, counters, mirrors, floors and walls., • Replenish restroom dispensers with paper products and soap., • Clean entrance glass and other interior glass., • Respond positively and promptly to customer work orders., • Work effectively with other team members., • Conduct all work in accordance with company procedures, including safety, door lock, time & attendance, and uniform policies., • Operate and maintain equipment such as vacuum cleaners., • Remove trash from containers and replace torn or soiled liners., • Report building and equipment maintenance issues to supervisor.Qualifications, • Education and work history that demonstrates work ethic and responsibility., • Must have ability to work independently and as a team member., • Must care about quality., • Must be detailed oriented and work at a efficient pace., • Must be reliable., • Able to lift 35 lbs., • Physically able to be on your feet during an entire shift; walking, bending, stooping, twisting, reaching, pulling, pushing, kneeling, and crouching., • Must have valid driver's licenseOffice Pride Offers: *Varies by location • Competitive Pay, • Affordable Health Coverage*, • Earned Wage Access*, • Flexible Hours and Scheduling, • Uniforms and Supplies Provided, • Coaching and Paid Training, • Great Culture and Core ValuesCompany Incentives Include:, • Job Performance Bonus, • Attendance Bonus, • Employee of the Year Award, • Employee of the Month Award, • Scholarship Program, • Sports Activities Program, • Fitness Activities Program, • Birthday Gift Cards, • Thanksgiving Gift Cards, • Holiday Bonus, • CalSavers Retirement Plan, • Travel Pay, • Gas Allowance, • Phone Allowance, • Laundry Allowance, • Employee Referral Bonus

Job DescriptionOrange County, CA General Laborer/Plumbing Apprentice Founded over 40 years ago, American Leak Detection is the world leader in the accurate, non-destructive detection of hidden water, sewer, gas and swimming pool leaks. American Leak Detection sets the standard for non-invasive leak detection and repair using proprietary methods and the most advanced, sophisticated technology. Our customers include residential homeowners and industry professionals like plumbers, building contractors, insurance adjusters, apartment managers, drain cleaners, restoration specialists, HOA’s, and municipalities. American Leak Detection is looking for a highly motivated, independent worker to join our team as a General Laborer. Great candidates will be mechanically inclined, comfortable with learning and using new technology, and also be ready to work outside in all weather conditions. This position requires intermittent, often heavy, physical labor. We provide paid training, all the tools needed to perform your job duties, and also a company vehicle for business use. Plumbing related repairs for: Suction lines Return lines Jet lines Skimmers Light concrete work Required Qualifications: Valid California Driver’s License Clean driving record Must be able to pass a criminal background check and drug screening Ability to move/lift up to 100 pounds Must be able to swim Experience using power tools Excellent communication skills, both written and verbal Ability to work independently Neat, professional appearance Must be able to meet physical labor requirements Preferred Qualifications: Familiarity with leak detection or pool plumbing system, pumps, pop-up cleaning systems Mechanical/electronics background Willing to train motivated candidate Education Level: High School or equivalent Wage: $16-$18 negotiable with experience. Opportunity to become a technician and be paid considerably more. Benefits: Paid vacation, paid holidays, 401K matching, paid training, Health insurance Start a career today with American Leak Detection!

Job Description Company Overview Neill Aircraft Company is a family owned and operated business based in Long Beach, California since 1956. Specializing in "Build-to-Print" services, we work with materials Aluminum, Titanium, Inconel, and Stainless-Steel. With over 250 employees, we prioritize customer satisfaction by continually enhancing our operations. Join us for an exciting journey in aerospace manufacturing! Position Summary Neill Aircraft Company is seeking a Deburr Technician to join our aerospace manufacturing team. This position is responsible for removing sharp edges, burrs, and surface imperfections from machined and fabricated metal components to ensure they meet engineering specifications and customer quality requirements. This position plays an important role in preparing precision aerospace parts for inspection and final assembly while maintaining strict quality and safety standards. Essential Duties & Responsibilities • Remove burrs, sharp edges, and excess material using hand tools, rotary tools, grinders, files, sanders, and other deburring equipment., • Smooth, polish, and finish metal components according to work instructions and customer specifications., • Verify that the correct materials and quantities have been issued before beginning work., • Accurately record productions activities using company's ERP system (Epicor)., • Work efficiently while maintaining high standards of workmanship and quality., • Follow AS9100 quality requirements and company procedures., • Maintain a clean, organized, and safe work area., • Communicate production issues or quality concerns to department lead. Qualifications • High school diploma or equivalent preferred., • Experience using hand tools in a manufacturing or mechanical environment preferred., • Ability to read and follow written work instructions., • Basic computer skills for production tracking and time reporting., • Strong attention to detail and commitment to quality., • Ability to work independently and as part of a team., • Previous aerospace manufacturing experience with deburring machined or fabricated metal parts preferred. Physical Requirements This position requires standing for extended periods while performing repetitive hand and wrist movements using hand tools and finishing equipment. Employees must be able to frequently use their hands for detailed work, bend, reach, and occasionally lift or move materials weighing up to 25 pounds. Good close vision, depth perception, and attention to detail are essential for inspecting and finishing precision aerospace components. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of this position. Work Environment This position is performed in a manufacturing environment where employees regularly work around machinery, power tools, and moving mechanical equipment. Exposure to metal dust, airborne particles, industrial noise, and manufacturing chemicals may occur. Personal protective equipment (PPE) is required, and employees are expected to follow all company safety procedures and quality standards. Why Join Neill Aircraft Company? • Stable aerospace manufacturing company serving the industry since 1956., • Growth opportunities and skill development., • Comprehensive benefits package (medical, dental, vision, company-paid basic life insurance, and other supplemental coverages)., • Team-oriented work environment focused on quality and continuous improvement. Apply Today! If you're looking for an opportunity to build your career in aerospace manufacturing and enjoy working with your hands, we'd love to meet you! Neill Aircraft Company is an Equal Opportunity Employer and is committed to providing equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by applicable federal, state, or local law. We are dedicated to fostering a workplace built on respect, fairness, inclusion, and equal opportunity for all. Neill Aircraft Company also provides reasonable accommodations to qualified individuals with disabilities throughout the application and employment process. Applicants who require an accommodation should contact Human Resources. Monday - Friday First Shift and Second Shift will be considered. 40 hours per week.

Job Description FLAG’s mission is to show our contractors & clients the best this industry can offer by upholding our principles of leadership, service, and exceptionalism. For a Best-in-Class experience, partner with FLAG and allow us to demonstrate how we’re changing the industry — and how we can do the same for you. We are looking to hire an Assembly Technician for 1st shift in Torrance, CA 90502. This is a Direct Hire opportunity to join our FLAG Team! ASE Certified Master Technician – 1st Shift Location: Torrance, CA 90502 Schedule: Monday – Friday | 5:00 AM – 1:30 PM Overtime: As Needed Pay Rate: $30.00 – $40.00/hour DOE Employment Type: Direct Hire Position Summary: We are seeking experienced Assembly Technicians with strong mechanical aptitude, automotive assembly experience, and exceptional attention to detail to support high-end vehicle production and restoration projects in a precision manufacturing environment. This role is responsible for assembling, fitting, troubleshooting, and finishing automotive components while maintaining the highest standards of craftsmanship and quality. The ideal candidate will have hands-on automotive assembly experience, strong problem-solving skills, and a passion for precision workmanship in vehicle restoration, manufacturing, or dealership environments. Key Responsibilities • Assemble, fit, align, and install automotive components and systems, • Perform bumper-to-bumper vehicle assembly and mechanical installation work, • Diagnose and troubleshoot assembly and fitment issues, • Read and interpret:, • Assembly instructions, • Work orders, • Technical drawings, • Build specifications, • Utilize hand tools, power tools, torque tools, and precision measuring equipment, • Ensure all assemblies meet strict quality and cosmetic standards, • Collaborate with:, • Leads, • Supervisors, • Production teams, • Quality personnel, • Support continuous improvement and production efficiency initiatives, • Train and assist junior technicians as needed, • Maintain clean and organized workstations, • Follow all OSHA, PPE, and shop safety procedures Required Qualifications • Minimum 5 years of automotive assembly, restoration, dealership, or manufacturing experience, • Strong mechanical aptitude and troubleshooting skills, • Experience with:, • Vehicle assembly, • Mechanical installation, • Automotive systems, • Precision fitting and finishing, • Ability to work with hand tools, power tools, and specialty automotive tools, • Strong attention to detail and craftsmanship mindset, • Ability to work in a fast-paced production environment, • Strong communication and teamwork skills, • Positive attitude and reliability Preferred Qualifications • ASE Certification highly preferred, • Experience with:, • Automotive restoration, • Luxury or high-performance vehicles, • Manufacturing assembly, • Custom vehicle builds, • Familiarity with early Porsche models highly preferred, • Experience mentoring or training technicians Physical Requirements • Ability to stand for extended periods throughout shift, • Frequent bending, reaching, kneeling, and repetitive hand movements, • Ability to lift and maneuver automotive components and tools safely Work Environment This position operates in a clean, professional automotive manufacturing and assembly environment with exposure to: • Automotive tools and equipment, • Mechanical systems, • Moving components and production equipment, • Fast-paced production workflows Proper PPE and adherence to all shop safety procedures are required. Benefits • Competitive compensation based on experience, • Health insurance options, • 401(k) with company match, • Paid time off, • Life and AD&D insurance, • Short-term and long-term disability coverage, • Tool support for technicians, • Career growth and advancement opportunities, • Ongoing training and development Qualified candidates are encouraged to apply immediately for consideration.