Offres Engineering à Ossining, New YorkCréer des alertes d'emploi

Job Description Clean Energy Application Engineer Job Summary We are seeking a Clean Energy Application Engineer to support the design, coordination, and implementation of mechanical, electrical, and plumbing (MEP) systems for commercial, industrial, and institutional projects. This role focuses on high-efficiency and non-carbon-based heating and cooling technologies, including water-source heat pump applications. You will blend hands-on engineering expertise with customer-facing and project support responsibilities, partnering across sales, engineering, project management, contractors, and other stakeholders. From pre-sale engineering and design development through construction, commissioning, and closeout, you will help ensure solutions align with applicable codes, project specifications, schedules, and cost objectives. Responsibilities • Prepare engineering layouts, calculations, specifications, and technical documentation for mechanical, electrical, plumbing, and heat pump systems., • Perform equipment selection and sizing based on project requirements., • Conduct load calculations, energy analysis, and other engineering calculations., • Develop schematic designs and support design development and construction documentation., • Evaluate equipment and system configurations to identify appropriate technical solutions., • Apply sustainable design principles and energy-efficiency best practices., • Ensure designs meet applicable building codes, industry standards, and regulatory requirements., • Collaborate with the sales team during pre-sale and project development phases to evaluate requirements and develop technical solutions., • Provide engineering input on equipment selection, system configuration, performance, and application requirements., • Assist in developing technical concepts and documentation to support customer proposals., • Communicate technical concepts clearly to both technical and non-technical stakeholders., • Support the transition of projects from sales/design development into project execution., • Coordinate with architects, structural engineers, contractors, project managers, and other engineering disciplines to resolve design conflicts., • Support project managers with design packages and technical deliverables for customer review and approval., • Participate in project meetings and provide technical guidance throughout the project lifecycle., • Review equipment submittals, shop drawings, RFIs, and other construction documentation., • Provide engineering support during construction and installation, including site visits and inspections as required., • Review field conditions and installation quality for consistency with design intent; help resolve technical issues., • Support system commissioning and functional performance testing; document field observations and design revisions., • Prepare engineering reports, technical specifications, basis-of-design documents, calculations, and other deliverables., • Maintain accurate, organized technical documentation and records of calculations, decisions, revisions, and field observations., • Participate in value-engineering activities and support lifecycle cost and energy analysis when required., • Apply relevant codes and standards (ASHRAE, NFPA, NEC, IPC, and applicable building codes)., • Incorporate energy-efficiency and sustainable-design principles and stay current on evolving codes, standards, and clean-energy HVAC technologies. Requirements Required Skills & Qualifications • Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Architectural Engineering, or a related engineering discipline., • Approximately 3–5 years of experience in MEP design, engineering, or a related technical environment., • Experience with mechanical and building systems design, including understanding of HVAC, heat pump, electrical, and/or plumbing systems., • Experience performing equipment selection, sizing, load calculations, and/or related engineering analysis., • Strong understanding of construction processes and building systems integration., • Ability to interpret engineering drawings, specifications, submittals, and construction documentation., • Knowledge of applicable building codes and engineering standards., • Strong technical problem-solving and analytical skills., • Effective written and verbal communication skills, including the ability to explain technical concepts to varied audiences., • Strong organizational skills and the ability to manage multiple projects and priorities., • Proficiency with AutoCAD MEP, Revit, and/or comparable BIM and engineering design software., • Understanding of construction documents, specifications, shop drawings, and RFIs., • Experience developing engineering calculations and technical documentation. Nice to Have Skills • Familiarity with energy modeling and engineering calculation software (preferred)., • Experience with water-source heat pumps, heat pump systems, electrification, high-efficiency HVAC, or other clean-energy technologies., • Experience supporting commercial, industrial, or institutional projects., • Experience providing technical or application engineering support to a sales organization., • Experience supporting projects from design through construction and commissioning. Preferred Education & Experience • Bachelor’s degree in an engineering discipline (as listed above)., • 3–5 years of relevant MEP design/engineering experience. Other Requirements • EIT certification preferred., • Professional Engineer (PE) license is a plus but not required., • Interest in pursuing additional professional credentials or certifications related to engineering, energy efficiency, or sustainable design. If you’re ready to apply your MEP expertise to high-efficiency, clean-energy building solutions, submit your application today for consideration. Pandologic. Keywords: Applications Engineer - Software, Location: Tarrytown, NY - 10591 , PL: 604061018

Job DescriptionApplications Engineer Job Summary We are seeking Boiler Sales & Application professionals across multiple experience levels—from developing representatives and application engineers to experienced and senior-level professionals. This full-time role blends technical boiler knowledge with consultative sales, customer relationship management, and application support to help contractors, engineers, building owners, and other customers identify and implement effective boiler and mechanical system solutions. Scope and seniority will be aligned to your technical expertise, industry experience, sales background, and ability to independently manage customers and projects. Senior-level professionals may also serve as technical resources and mentors to other team members. Regular travel is required throughout the assigned territory. Responsibilities • Build and maintain relationships with new and existing customers, including contractors, engineers, building owners, purchasing contacts, and other industry partners., • Travel throughout the assigned territory to support customers and achieve sales objectives., • Identify new business opportunities and develop prospective customers and sales leads., • Prepare and present price quotations and bids based on project requirements, material and labor costs, and manufacturing schedules; follow proposals through customer review and approval., • Maintain accurate customer, opportunity, and sales information in the CRM., • Investigate and assist in resolving customer concerns related to projects, equipment, and deliveries., • Monitor market conditions, competitor activity, and sales indicators., • Attend trade shows, customer meetings, factory visits, networking events, and other industry events as needed., • Gather and clarify boiler, mechanical system, equipment, and application requirements with customers., • Review and interpret contract drawings, specifications, and other project documentation., • Support equipment selection, system applications, installation considerations, and technical solutions for contractors, engineers, and owners., • Provide technical feedback related to system and equipment design., • Conduct equipment demonstrations and technical product presentations; conduct or participate in educational presentations for engineering firms, contractors, and customers., • Maintain current knowledge of boiler technologies, equipment, industry developments, and relevant product offerings; develop turnkey solutions when appropriate., • Collaborate with project managers, inside/outside sales, engineering, and service teams to support successful project execution and transition projects from sales/design through project management and service., • Contribute to improvements in sales processes, customer service, and overall performance while maintaining a professional presence in all interactions. Requirements • Ability to interpret and understand mechanical drawings and project specifications., • Strong verbal and written communication skills., • Strong customer service and follow-up skills., • Effective interpersonal, presentation, persuasion, and negotiation skills., • Ability to work effectively within a team while also operating independently., • Strong organizational skills with the ability to prioritize and adapt to changing deadlines., • Sound judgment and the ability to explain technical and business recommendations., • Comfort using equipment, technology, CRM systems, and related software., • Ability and willingness to travel regularly within the assigned territory. Required Skills • Consultative/technical sales and customer relationship management, • Boiler/mechanical system application support and equipment selection, • Quotation/bid preparation and proposal follow-through, • Drawing/specification review and interpretation, • Presentations, demonstrations, and customer education, • Cross-functional collaboration (sales, engineering, project management, service), • CRM proficiency and organized pipeline management Nice to Have Skills • Boiler, combustion, HVAC, hydronic, mechanical systems, or related industrial equipment experience, • Proven technical or equipment sales experience, • Experience working directly with mechanical contractors, consulting engineers, and building owners, • Experience with major commercial or industrial boiler manufacturers, • Relevant boiler, combustion, HVAC, or technical certifications, • Experience mentoring or training sales professionals, • Experience managing complex applications or projects from design through execution Preferred Education and Experience • Bachelor’s degree in Engineering or a related technical field (preferred), • Experience or demonstrated interest in technical, equipment, industrial, HVAC, mechanical, or boiler sales, • Open to multiple career stages; final level/title and responsibilities will be based on experience and demonstrated capability Other Requirements • Regular travel throughout the assigned territory If you’re ready to apply your technical expertise and customer-facing strengths to support boiler and mechanical system solutions, submit your application to be considered. Pandologic. Keywords: Senior Applications Engineer - Software, Location: Tarrytown, NY - 10591 , PL: 604061015

Job Description Overview CTG is seeking to fill a Reactive Ion Etch Engineer position for our client in Yorktown Heights, NY. Location: Yorktown Heights, NY Duration: Ongoing Contract Duties: • Develop processes and characterize wafers on reactive ion etch (RIE) platform tools., • Operate reactive ion etch tools efficiently and safely., • Ensure compliance with safety protocols when working with chemicals and compressed gases., • Document processes and results with attention to detail., • Collaborate with engineers and research teams to accomplish assigned tasks in a fast-paced environment., • Maintain clear and professional communication regarding project updates and challenges. Skills: • Strong understanding of semiconductor processing, particularly RIE fundamentals., • Proficiency in using semiconductor fabrication tools., • Familiarity with plasma chemistry principles., • Excellent computer and analytical skills. Experience: • Minimum of 2 years of experience in semiconductor manufacturing, specifically in reactive ion etch., • Prior experience working in a cleanroom environment is highly desirable., • Experience in the field of chemistry or physics is a plus. Education: • BA/BS in Engineering, Chemistry, or a related field, or equivalent experience. Excellent verbal and written English communication skills and the ability to interact professionally with a diverse group are required. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Tana Stilloe at tana.stilloe@ctg.com. Kindly forward this to any other interested parties. Thank you!

Job Description We are seeking a skilled and motivated Structural Design Engineer to join our growing team in our Pleasantville, NY office. This is an excellent opportunity to work on meaningful and diverse infrastructure projects that directly impact local communities. Savin Engineers is seeking Structural Design Engineer for Westchester, Pleasantville office. Great opportunity to join dynamic team. Key Responsibilities: • Leading the effort in the development of structural drawings and specifications, • Coordination between disciplines, • Attendance at internal meetings, • Preparation of calculations for renovations and new construction, • Review of shop drawings as well as other design services during construction Structural Design Engineer Primary Design Areas: • Structural analysis and design of reinforced concrete, structural steel, masonry, and specialty structures, as well as pipe and civil engineering design (wastewater, sewers, etc). Job Requirements: • BS Civil Engineering, with an emphasis on structural engineering., • Understanding of Building Codes and various design codes and references;, • Knowledge of construction drawing standards;, • Excellent communication and writing skills who can handle simple to complex projects across a varied staff;, • Attention to detail and highly organized;, • Self-starter, able to work independently and able to multi-task while achieving deadlines. \nCompany Description Savin Engineers, P.C. is a well-established, mid-size engineering firm headquartered in Westchester County, NY with offices in Pleasantville, NY, Rochester, NY, Bridgewater, NJ and Washington DC. Savin Engineers is always looking for talented and motivated individuals to join our team. We are a growing and vibrant multi-disciplined engineering consulting firm with six divisions united under one roof. Our MEP Division (high performance, low energy solutions) is reinforced by our Transportation Division (roads, tunnels, bridges, railways and airports), our Structural Division (structural solutions and structures of dependable performance); our Environmental Division (systems to safeguard our water), our Field Services Division (technology to detect subterranean system failures), and our Educational (turnkey assistance from concept to close out) and Facilities Management (infrastructure and building operation analysis) Division. We offer exciting opportunities to build careers in any of our multiple office locations. Whether it’s planning, design, field inspection or construction administration – any area of the company you may be involved in is staffed with a diverse group of highly-educated, qualified mentors working on a wide range of interesting assignments. We offer a competitive benefit and compensation package. Savin Engineers is an Equal Opportunity Employer Savin Engineers, P.C. is a well-established, mid-size engineering firm headquartered in Westchester County, NY with offices in Pleasantville, NY, Rochester, NY, Bridgewater, NJ and Washington DC. Savin Engineers is always looking for talented and motivated individuals to join our team. We are a growing and vibrant multi-disciplined engineering consulting firm with six divisions united under one roof. Our MEP Division (high performance, low energy solutions) is reinforced by our Transportation Division (roads, tunnels, bridges, railways and airports), our Structural Division (structural solutions and structures of dependable performance); our Environmental Division (systems to safeguard our water), our Field Services Division (technology to detect subterranean system failures), and our Educational (turnkey assistance from concept to close out) and Facilities Management (infrastructure and building operation analysis) Division. We offer exciting opportunities to build careers in any of our multiple office locations. Whether it’s planning, design, field inspection or construction administration – any area of the company you may be involved in is staffed with a diverse group of highly-educated, qualified mentors working on a wide range of interesting assignments.\r\n\r\nWe offer a competitive benefit and compensation package. \r\nSavin Engineers is an Equal Opportunity Employer

Job Description Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. ORGANIZATIONAL RELATIONSHIPS Closely work with together with the BIM Manager and system’s design engineers to provide 3D design aid throughout the project’s life cycle. Reports to Enterprise Systems engineering manager. SCOPE OF RESPONSIBILITY The Engineer is responsible for working closely with the BIM Manager and Systems Engineer to create a 3D model of the integrated security systems design submittal for approval by the customer or representative and in accordance with project specifications, drawings, codes, and regulations, manage and create the design submittal (drawings, bill of material, calculations, as-builts, etc.) and maintain the submittal during changes to the contract. Work within Security Technology systems group on the design and integration of security systems, access control, intrusion detection systems, communication, CCTV, Intercom systems, computer, and networking. Develop detailed design schematic and review 2D and 3D drawings for electronic and electrical products. This position will require working closely with project managers, design engineers, engineering specialists, manufactures, customers, engineering firms and other external experts. This position will require working in the Elmsford-NY office or the Fair Lawn-NJ office. Travel if might needed is less than 10% of the time. Job Requirements: ESSENTIAL FUNCTIONS • Basic working knowledge of Electronic Security Systems and features., • Creating Detailed 3D Models utilizing Revit, AutoCAD, and Navisworks to develop detailed 3D models of architectural designs., • Work closely with Design Engineers, architects, and other team members., • Updating and Modifying Models. As plans and specifications change, update and modify existing models accordingly., • Generating 2D Drawings and Details. Extract 2D drawings and construction details from 3D models., • Clash Detection and Coordination. Run clash detection analyses to identify conflicts or discrepancies between different building elements., • Attend Regular Project clash detection meetings and be prepared with clash reports to facilitate coordination meetings among project stakeholders., • Adherence to BIM Standards. Ensure that all models comply with project-specific BIM standards and protocols., • Maintaining BIM Libraries. Create and update BIM families within the project’s library., • Contributing to BIM Standards Development and actively participate in enhancing BIM standards and best practices within the organization., • Ability to handle multiple projects, schedule work and communicate effectively to peers. ADDITIONAL RESPONSIBILITIES • Be prompt, reliable, and on time in all aspects of your engagement while maintaining a high level of attention to detail and accuracy., • Perform any additional duties as required or assigned. SPECIAL KNOWLEDGE, SKILLS, AND ABILITIES • Security engineering experience is preferred but not a must., • BS in EE Engineering or equivalent is required., • Computer skills to include Revit, AutoCAD, Navisworks and MS Office., • Knowledge of ISO 19650 standards, • AC and DC circuitry, voltage drop calculations and wire sizing., • Basic knowledge of network and system security principles, not only in theory., • Executing enterprise engineering techniques., • Proven experience managing workload and pressure situations. Securitas offers comprehensive benefits including: • Company training and industry leading certification program, • Opportunity for annual merit pay increases, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description Job Summary: We have an exciting and rewarding opportunity for a Manufacturing Engineer. Excellent opportunity for a highly motivated and self-directed individual to join a stable and reputable manufacturing company of engineered mechanical components. The Manufacturing Engineer is responsible for developing, standardizing, and improving manufacturing processes to ensure product quality, cost efficiency, and production reliability. This role will work closely with production, quality, and maintenance teams to optimize workflows, resolve shop-floor issues, and support continuous improvement initiatives across CNC machining, programming, set up, fabrication, and assembly operations. Responsibilities: • Develop, document, and standardize manufacturing processes, methods, and work instructions to improve productivity, consistency, and safety., • Analyze production data to identify and resolve process inefficiencies, bottlenecks, and quality issues., • Provide hands-on engineering support on the shop floor, assisting operators and supervisors in problem-solving and technical troubleshooting., • Design and implement tooling, jigs, and fixtures to improve manufacturing accuracy, setup efficiency, and repeatability., • Collaborate with Quality, Maintenance, and CNC Programming teams to verify accuracy and conformity of parts and processes to specifications., • Evaluate and recommend manufacturing methods, equipment, and technology upgrades to support cost reduction and continuous improvement initiatives., • Support new product introduction (NPI) by developing process flows, work instructions, and required tooling., • Ensure alignment with ISO/Quality Management Systems and other applicable standards and regulations., • Train production personnel on new or revised processes and support adherence to standard operating procedures. Qualifications/Requirements • Bachelor’s Degree in Mechanical Engineering or related technical discipline required., • 5–7 years of experience in a manufacturing engineering role within an industrial, machining, or fabrication environment., • Proven experience with CNC machining processes, programming, set up, tooling design, and fixture development., • Strong understanding of manufacturing methods, process optimization, and lean manufacturing principles., • Exposure to quality systems (ISO 9001, AS9100, or equivalent) and experience working cross-functionally with quality teams., • Proficient in CAD software (SolidWorks, AutoCAD, or similar) and ability to create or interpret engineering drawings and models., • Excellent analytical, problem-solving, and communication skills., • Ability to work independently and collaboratively in a fast-paced manufacturing environment. Work Environment: Manufacturing. wearing protective gear PPE, Fast paced, Benefits Package Includes: Competitive benefits package. Salary commensurate with experience.($75K - 90K) Comprehensive health insurance plan, 401k retirement plan, Sick/personal days, Vacation, paid holidays, Life insurance, STD, LTD, AD&D insurance coverage. ITAR Statement This position requires compliance with ITAR requirements. Must be a “U.S. Person” (per ITAR 120.15) and are required to show proof substantiating this upon being hired. AAP/EEO Statement Metallized Carbon Corporation has been and will continue to be an equal opportunity employer. Applicants are recruited, hired, assigned and promoted without regard to race, religion, color, national origin, citizenship, sex, veteran's status, age or disability. \nCompany Description For over 75 years now Metallized Carbon Corporation has been the leader in manufactured engineered carbon graphite solutions for severe service lubrication. Throughout the world, we provide products and services to various industries that deal with sophisticated equipment. Whether aerospace, food service, automotive or petrochemical, you are sure to find carbon graphite bearings, seals or other items produced by METCAR. If you are looking for a highly technical career in a challenging environment, please contact us today. For over 75 years now Metallized Carbon Corporation has been the leader in manufactured engineered carbon graphite solutions for severe service lubrication. Throughout the world, we provide products and services to various industries that deal with sophisticated equipment. Whether aerospace, food service, automotive or petrochemical, you are sure to find carbon graphite bearings, seals or other items produced by METCAR. If you are looking for a highly technical career in a challenging environment, please contact us today.

Job Description Manufacturing Engineer Location: Croton-on-Hudson, NY Client does not offer Relocation. Must live commutable distance. Compensation: $75,000 – $90,000 (depending on experience) MACHINING FABRICATION CNC ENVIRONMENT EXPERIENCE. cOMPANY HAS INTERNATIONAL LOCATIONS, STABLE FINANCIALLY SECURE BEEN AROUND 40 YEARS. GREAT JOB SECURITY. Seeking a Manufacturing Engineer to support and improve production operations. This is an excellent opportunity for a hands-on, self-directed individual to play a key role in optimizing manufacturing processes, improving efficiency, and supporting continuous improvement initiatives across machining and production environments. Qualifications: • Bachelor’s Degree in Mechanical Engineering or related technical discipline required, • 5–7 years of experience in a manufacturing engineering role within a machining or fabrication environment, • Strong experience with CNC machining processes, programming, setup, tooling, and fixture design, • Solid understanding of process optimization and lean manufacturing principles, • Experience working with quality systems such as ISO 9001, AS9100, or similar, • Proficiency in CAD software (SolidWorks, AutoCAD, or similar), • Strong analytical, problem-solving, and communication skills, • Ability to work both independently and collaboratively in a fast-paced environment Key Responsibilities: • Develop, document, and standardize manufacturing processes and work instructions to improve efficiency and consistency, • Analyze production data to identify and resolve process inefficiencies, bottlenecks, and quality issues, • Provide hands-on support on the shop floor, assisting with troubleshooting and process improvements, • Design and implement tooling, jigs, and fixtures to improve accuracy and setup efficiency, • Collaborate with production, quality, and maintenance teams to ensure processes meet specifications, • Evaluate and recommend improvements to manufacturing methods, equipment, and technology, • Support new product introduction by developing process flows, documentation, and tooling requirements, • Ensure compliance with quality standards and support continuous improvement initiatives, • Train production staff on new or updated processes

Job Description Please note; this role is based in Sleepy Hollow! Position Overview: The Hudson Clean Heat Applications Engineer will be responsible for the design, coordination, and implementation of mechanical, electrical, and plumbing systems for commercial, industrial, and institutional projects utilizing the latest in water source heat pump technology and any other non-carbon based heating and cooling technology. This role requires applied engineering experience in MEP disciplines and collaboration with multidisciplinary teams to ensure effective project delivery. The engineer will support the Sales Team in design development, construction documentation, and the Project Management team in the project execution, ensuring compliance with applicable codes, standards, and project specifications while meeting the project timelines and cost targets. Key Responsibilities: • Design & Engineering Development, • Prepare detailed design layouts, calculations, and specifications for heat pump, electrical, and plumbing systems., • Perform equipment selection and sizing, load calculations, and energy analysis., • Review and apply relevant building codes, standards (ASHRAE, NFPA, NEC, IPC), and regulatory requirements., • Develop schematic designs and support design development and construction documents., • Project Coordination, • Collaborate with the Sales Team on the pre-sale engineering characteristics of projects., • Collaborate with architects, structural engineers, contractors, and other disciplines to ensure integrated design solutions., • Coordinate MEP systems across project teams to resolve conflicts and design issues., • Support the project manager in preparing design packages for client review and approval., • Participate in project meetings and communicate engineering concepts to both technical and non-technical stakeholders., • Construction & Implementation Support, • Review submittals, shop drawings, and Requests for Information (RFIs) during the construction phase., • Together with the Project Manager, conduct site visits and inspections to monitor compliance with design intent and installation quality., • Assist in commissioning support and functional performance testing of MEP systems., • Technical Documentation & Reporting, • Prepare engineering reports, technical specifications, basis of design documents, and other project deliverables., • Maintain accurate documentation throughout the project lifecycle, including design revisions and field observations., • Participate in value engineering exercises and support lifecycle cost analysis., • Compliance & Safety, • Ensure that all designs comply with environmental, health, and safety regulations., • Incorporate sustainable design principles and energy efficiency best practices where applicable., • Continuous Improvement & Professional Development, • Stay current with technological advancements, industry best practices, and code changes in MEP disciplines., • Pursue professional development opportunities, including licensure (e.g., PE, LEED AP). Qualifications: • Bachelor’s degree in mechanical, Electrical, or Architectural Engineering, or related field., • Approximately 3-5 years of experience in MEP design and engineering., • Proficiency in design software (AutoCAD MEP, Revit, and/or similar BIM tools)., • Familiarity with energy modeling software and calculation tools is preferred., • Strong understanding of construction processes and building systems integration., • Effective communication and coordination skills., • EIT certification preferred; PE license is advantageous but not mandatory at this level. All candidates must be legally permitted to work in the United States of America, pass a background check, a drug screening and reliably commute to both the Sleepy Hollow, NY office and on occasion to a job site. The Candidate must have their own auto insurance in their own name and meet corporate minimums for coverage. \nCompany Description Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members. Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job Description Securitas Technology, a global leader in integrated security solutions, is dedicated to helping make the world a safer place. With over 13,000 employees in 40 countries, we protect and empower businesses through a connected ecosystem of health, safety, and security solutions. As a trusted leader in systems integration and alarm monitoring, we bring the Securitas Technology Difference to life— delivering a comprehensive suite of video surveillance, access control, intrusion detection, fire safety, and integrated security solutions. We’re seeking a Technology Solutions Architect (TSA) to join our Engineering Center of Excellence. This role supports our sales Organization by developing repeatable, cutting-edge electronic security solutions tailored to client needs. Collaborating closely with sales leadership, the TSA plays a key role in shaping strategy, design, and technology support across regional and national teams. Primary responsibilities include: • Providing subject matter expertise to drive customer discussion on electronic security solution offerings, • Assist in coordinating communications and activities between the sales teams, local & regional field resources and the pre/post-sales engineering department, • Act as and be the systems integrations and field applications expert for the sales organization, • Directs and acts as a technology mentor for sales, costing, engineering, and field implementation, • Perform customer consultations, presentations, and demonstrations of identified technologies that fit the need for the customer’s solution, • Assist in Securitas events, and external tradeshow, such as, but not limited to GSX, ISC, NRF, RILA, and more Additional responsibilities include: • Conduct detailed field surveys for use in the design development and estimating of a customer’s solution, • Value engineer solutions to meet customer needs and support the sales operations teams to win, • Support costing & estimating engineers by developing, providing, and collaborating on bill of materials, scope of work, presales device placement drawings and subcontractor collaboration, • Assists in the preparation of sales proposals by providing pertinent technical information and reviews proposals for technical accuracy and adherence to product standards, • Advises and interacts with product management regarding product defects and provides customer input on suggested product improvements, • Support the field teams by selecting standard technology across installations. Where necessary, this includes supporting field installations with understanding of design and solution, • Provide insight and assist in the process of creating advanced plans when customers are migrating or implementing new technology. This includes technology selection, and project planning, • Support sales with technology related questions or scope. Help them understand what solution and strategy is required to accomplish a job, specification requirement and to win. This includes attending meetings, walk throughs and scope reviews Qualification and Education • 6+ Years’ experience in Electronic Security, • 5+ Years’ experience in designing Electronic Security systems (Intrusion Detection Systems (IDS), Access Control Systems (ACS), CCTV/ VMS (Video Management System, Visitor Management Systems, Intercom Systems), • Bachelor's Degree, or equivalent education and/or experience, • A valid state driver’s license, without restrictions, • Detailed knowledge of integrated electronic security solutions and design, • Some knowledge of Fire Alarm & Life Safety Code, • Working knowledge of Computer Systems & Networking, • Ability to read & interpret electronic security specifications, perform equipment counts (take off’s). Identify cable requirements & distances, as well as calculate power load & battery calculations., • Clear, professional communicator with the ability to engage effectively with internal teams and clients, • Self-motivated, detail-oriented, and deadline-driven Preferred Skills • Consultative sales process experience preferred, • Field Applications experience preferred, • Systems Integration experience preferred, • Physical Security Information Management (PSIM) and Global Security Operations Centers (GSOC) experience preferred, • Bluebeam and Visio experience preferred, • Knowledge of high security credentials such as iClass/DESFire & Personal Identity Verification (PIV/FICAM)., • Understanding / Certification with UL (681 & 2050) & High Security applications/systems., • Knowledge of Structured cabling / BICSI Certification / EIA/TIA-568., • Understanding of NFPA (National Fire Protection Association) code (Specifically in your assigned area) / NICET Certified. Additional Notes • Travel expected to be about 50% Securitas Technology Offers Comprehensive Benefits Including • Opportunity for annual merit pay increases, • Medical, Dental, Vision, Life, Critical Illness, and Hospital Indemnity Coverage, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job DescriptionDirector, Technical Service & Biomedical Engineering The Director, Technical Service & Biomedical Engineering leads the strategic, operational, and regulatory direction of the companys technical service and biomedical engineering functions. This role is responsible for building and developing high-performing teams across Technical Support, Biomedical Engineering, and Installation while ensuring exceptional service delivery, technical excellence, and regulatory compliance. The position also oversees budget planning, cost center management, technical troubleshooting, service partner performance, and continuous improvement initiatives that enhance customer satisfaction and operational effectiveness. Working cross-functionally with Clinical Technical Service, Marketing, Product Management, QA/Regulatory, and commercial teams, this leader plays a critical role in supporting product validations, training initiatives, complaint resolution, and quality system compliance. The role ensures adherence to FDA, ISO 13485, Canadian Medical Device regulations, Joint Commission standards, and other applicable laboratory and regulatory requirements while driving strong documentation practices, audit readiness, and process improvement. Responsibilities • Lead the strategic direction, daily operations, and performance of the Technical Support, Biomedical Engineering, and Installation functions., • Develop department goals, priorities, and operating plans aligned with broader business objectives., • Own budget planning, forecasting, expense management, and capital asset planning for the technical operations cost center., • Provide leadership for complex technical troubleshooting, escalation management, and resolution of hardware, software, and customer-related issues., • Support the evaluation, testing, and implementation of new instrumentation, analyzers, and related technical systems., • Partner cross-functionally with Clinical Technical Service, Marketing, Product Management, QA/Regulatory, and commercial teams to support product launches, validations, and training initiatives., • Develop and deliver technical training programs and materials for internal teams, distributors, and service partners., • Manage external service providers and ensure performance against service, quality, and compliance expectations., • Oversee the development and maintenance of SOPs, technical procedures, service documentation, and complaint-handling processes., • Monitor technical support data, quality control, and calibration trends to identify issues, improve reliability, and strengthen service performance., • Partner with Quality to align metrics, monitor KPIs, and maintain audit readiness across the function., • Drive continuous improvement initiatives that enhance operational efficiency, regulatory compliance, and customer satisfaction. Qualifications: • Bachelors degree in engineering, biomedical engineering, a related technical field, or an equivalent combination of education and experience., • 10+ years of experience supporting laboratory equipment, instrumentation, analyzers, or related technical systems., • Leadership experience within the diagnostics, laboratory, or medical device industry., • Experience leading teams and driving improvement initiatives in a growing or evolving organization., • Strong background in technical troubleshooting, service operations, training, and regulated environments. Preferred Qualifications: • Advanced degree in engineering, biomedical engineering, business, or related discipline., • Experience supporting capital equipment or complex diagnostic platforms in a customer-facing environment., • Familiarity with complaint handling, CAPA, validation activities, and service-related quality systems., • Experience working with distributors, third-party service providers, or global service networks., • Demonstrated success leading organizational change, process improvement, or service transformation initiatives. Base salary range: $170,000 to $180,000 per year. This is the anticipated salary range for fully qualified candidates. The final salary offered will be dependent on several factors that include and are not limited to relevant previous experience, job responsibilities and duration of experience, the type and length of experience within the industry, education, etc. \nCompany Description Openwork is a candidate-focused staffing company on a mission to bring ease, accessibility, and thoughtfulness to an industry we’ve held a footing in for 50+ years. We believe there’s more to life than livelihood, but that finding your dream job, career, or team is a really good place to start. Openwork is a candidate-focused staffing company on a mission to bring ease, accessibility, and thoughtfulness to an industry we’ve held a footing in for 50+ years. We believe there’s more to life than livelihood, but that finding your dream job, career, or team is a really good place to start.

Job Description SUMMARY An Engineering Quoter is responsible for generating, tracking and communicating quoting activities for new and existing customers. This includes producing accurate bills of material and pricing ensuring manufacturability, quality and correct documentation. The ideal candidate should have an analytical mindset to determine the best way to efficiently manufacture machined components. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. · Analyzes blue prints, specifications and other documentation to prepare accurate quotation on all customer RFQs. · Develops Bill of Materials in Epicor ERP system with all pertinent information and instruction to ensure accurate and effective manufacturing methods meeting all customer requirements · Identifies labor, material and time requirements for all manufacturing operations · Work with manufacturing to ensure standards and methods are accurate · Presents prepared estimates to Sales and Customer Service teams · Maintains cost and manufacturing standards database · Maintain standard product price lists QUALIFICATIONS · Mechanical/Industrial Engineering Degree Preferred · Associates Degree in Technical Area · 0-2 years in manufacturing environment · Familiar with CAD programs · Proficient in Microsoft Office PROFESSIONAL SKILLS · Strong organizational skills · Ability to analyze information quickly · Flexible and self-motivated · Ability to multi-task, prioritize and manage time effectively · Eagerness to satisfy the customer

Job DescriptionAbout TetraScience TetraScience is the Scientific Data and AI Company building Tetra OS, the operating system for scientific intelligence. We help the world’s leading life sciences firms turn fragmented scientific data into AI-native assets and scientific workflows that accelerate discovery, development, and manufacturing. TetraScience’s growing ecosystem of strategic partners includes NVIDIA, Databricks, Thermo Fisher Scientific, Snowflake, Google, and Microsoft. In connection with your candidacy, you will be asked to carefully review “The Tetra Way,” authored by our CEO, Patrick Grady; it is impossible to overstate the importance of this document, and you should take it literally as you decide whether our mission, culture, and expectations are right for you. Who You Are You are a product-minded, outcome-obsessed driver of technical scientific solutions. You are a high velocity self-starter. You refuse to let uncertainty obstruct your path to designing and building solutions. You roll up your sleeves, try things out, and get things done. You do not hesitate to prototype, demo, and build in order to accelerate delivery of products for your end users. You thrive in environments where you can collaborate with scientists, product managers, and engineers to transform complex scientific data into actionable outcomes. Your ability to engage with scientists and business leaders alike makes you a key player in maximizing the value of scientific data. With rich experience applying cutting edge data methodologies to the biopharma R&D domain, you bridge understanding between present-day pain points and generalizable solutions. You are an insatiable learner, with a track record of deeply learning new tools, methods, and domains. You fundamentally embody the principles of extreme ownership and have a demonstrated history of building extensible data models and applications for Biopharma end users to maximize value from their data via analysis and integration with AI/ML. This role will require extreme self-discipline and determination as we forge a category that will fundamentally and forever change the life science industry. Requirements What You Have Done You deeply understand the life science R&D data ecosystem – you’ve felt the pain of brittle, bespoke workflows with fractured data, and you’ve actively worked to solve this. In our experience, the candidates with this experience bring the following background: • PhD with +4 years, Masters with +6 years, or Bachelors with +8 years of industry experience in life sciences with extensive domain knowledge in drug discovery (target ID through lead optimization), preclinical development, CMC (all drug modalities), product quality testing, or pharma manufacturing., • Proven track record of defining, designing, prototyping, and implementing productized AI/ML-driven use cases in cloud environments, • Designed scalable and reusable data architecture, • Collaborated with cross-functional teams, including product managers, software engineers, and scientific stakeholders., • Performed extensive exploratory data analysis and workflow optimization to enable scientific outcomes not previously possible., • Engage diverse audiences, from scientists to executive stakeholders using your excellent communication and storytelling abilities., • Advised scientists in a consulting capacity to further research, development, and quality testing outcomes., • Augmented your technical, business, and communication work through agentic development and knowledge work, • Nice to have: Hybrid dry lab / wet lab experience What You Will Do • You will be a critical team member in a unique partnership to industrialize Scientific AI. As such, you will engage directly with customers onsite a couple of days per week in the assigned geographic region, building strong relationships, deeply understanding their scientific data challenges and requirements, and accelerating solutions., • Design and implement extensible, reusable data models that efficiently capture and organize scientific data for scientific use cases, ensuring scalability and future adaptability., • Translate scientific data workflows into robust solutions leveraging the Tetra Data Platform., • Own, scope, prototype, and implement solutions including:, • Data model design, • Python-based pipeline development., • Lab software (e.g., ELN/LIMS) integration via APIs., • Data visualization and app development, • Scientific agents, • Leverage agentic development tools like Claude Code and Codex to contribute to discovery, prototyping, and development, • Collaborate with Scientific Business Analysts (SBAs), customer scientists and applied AI engineers to develop and deploy models (ML, AI, mechanistic, statistical, hybrid) and agents, • Interface directly with scientific end users and technical stakeholders to rapidly drive solution development and adoption through regular demos and meetings, • Proactively communicate implementation progress and deliver demos to customer stakeholders., • Collaborate with the product team to build and prioritize our roadmap by understanding customers’ pain points within and outside Tetra Data Platform., • Rapidly learn new technologies to develop and troubleshoot use cases, • Must be able to travel to client sites in local geographic areas Benefits • 100% employer-paid benefits for all eligible employees and immediate family members, • Unlimited paid time off (PTO), • 401K, • Company paid Life Insurance, LTD/STD, • A culture of continuous improvement where you can grow your career and get coaching We are not currently providing visa sponsorship for this position. The salary range for this position is $140,000 - $240,000. The salary range posted reflects our target baseline for this role. Final compensation is determined by a thorough evaluation of factors including the candidate’s specific experience, localized market data, and internal team equity.

Job Description Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge and technology power our connected ecosystem of health, safety and security solutions and services. POSITION SUMMARY As an Applications Engineer, you will need to formulate an engineered estimate and or budget for new and existing clients that shall be provided by consultants, engineers, construction managers, general contractors and also from in-house Sales Representatives, Key Account Representatives and or Project Managers. SCOPE OF RESPONSIBILITY • Analyze and interpret blueprints, specifications, and scope documents for fire and security system projects., • Prepare detailed cost estimates for labor, materials, and equipment for alarm systems, CCTV, access control, and other low-voltage installations., • Conduct take-offs and identify potential value-engineering alternatives to reduce costs without sacrificing quality., • Collaborate with vendors and subcontractors to source competitive pricing., • Develop bid proposals, ensuring all required documentation is submitted on time., • Partner with sales and project management teams to ensure seamless project handoffs., • Maintain an up-to-date pricing database., • Keep current with changes in industry codes, technology advancements, and competitive practices. Qualifications • Minimum 5 years of experience estimating in the fire alarm and/or security/low voltage field., • Education BA Business/ BS Engineering/MS Engineering or applicable amount of experience in the appropriate field may be substituted for the educational background, • Strong understanding of relevant codes, including NFPA and NEC., • Ability to read and interpret detailed construction drawings and scope documentation., • Experience working with major manufacturers (e.g., Silent Knight, Firelite, Bosch, Hanwha, Avigilon, Axis, Genetec, Lenel, and others)., • High level of organization and accuracy with strong attention to detail., • Excellent communication and time management skills., • NICET Certification- Fire Alarm Systems Level III or higher, preferred., • Computer skills to include:, • MS Office, • Acrobat, • Visio, • DWG Writer, • Big Machines, • Sales Force dot com ESSENTIAL FUNCTIONS • Product selection and application (to ensure the right product is used in the right application) while maintaining adherence to Securitas’s product selection process and design standards., • Estimate installation costs in conjunction with Implementation Operations, Service Operations, Internal Labor and External Labor, • Review of Field Site Survey documents and drawings., • Supports the RFI, RFP, RFQ and RFM&S process as needed, • Create estimates and budgets for access control, intrusion, CCTV, intercom, PSIM, PLC and structured cabling systems, • Review architectural, electrical, telecommunication, security engineering floor plans, riser drawings, device schedules, detail drawings, interconnect and closet layout drawings., • Interpret specifications, addendums, revisions, sketches and Scope of work., • Work with project managers and design engineers for creating change orders on existing and ongoing projects., • Manage assigned projects and maintain deadlines for each project., • Build and maintain a good relationship with coworkers, suppliers and manufacturers., • Create a detailed list of clarifications, exclusions & compliance on a per project basis, • Knowledge of construction schedules, project meetings and how they pertain and impact the project., • Able to research product information utilizing the internet, • Excellent working knowledge of construction industry conventions, • Good understanding of workload and the requirements to maintain commitments., • Ability to navigate high value job environment for time lines, and compliance requirements, • Firm grasp of the competitive environment and strategic plays by competitors, • Excellent command and knowledge of building code requirements Securitas Technology Offers Comprehensive Benefits Including • Opportunity for annual merit pay increases, • Paid company training, • Medical, Dental, Vision, Life, Critical Illness, and Hospital Indemnity Coverage, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge and technology power our connected ecosystem of health, safety and security solutions and services. Objective We pride ourselves on delivering innovative solutions and data-driven insights to help our clients succeed. We are currently looking for a driven, detail-oriented, and analytical Business Analyst Intern to join our team for the summer. This internship is a fantastic opportunity for a current student or recent graduate who is eager to gain hands-on experience in business analysis and data-driven decision-making. Responsibilities: Assist the business analysis team in gathering and analyzing data to support decision-making processes. Help with the preparation of business reports, presentations, and dashboards for internal and client-facing purposes. Conduct market research and competitive analysis to identify industry trends and business opportunities. Assist in the development and implementation of process improvements and operational efficiencies. Collaborate with other departments to gather requirements and ensure data accuracy and completeness. Participate in meetings to understand business needs and provide insights based on data analysis. Requirements: Current student or recent graduate in Business Administration, Economics, Finance, Data Analytics, or a related field. Strong interest in business analysis, data interpretation, and problem-solving. Proficient in Microsoft Excel; knowledge of data analysis tools such as Power BI, Tableau, or SQL is a plus. Excellent written and verbal communication skills. Ability to work independently as well as part of a team. Strong attention to detail and analytical mindset. Ability to manage multiple tasks and meet deadlines in a fast-paced environment. Benefits: Hands-on experience in business analysis and strategic decision-making. Exposure to industry-standard tools and methodologies. Opportunity to work closely with experienced professionals and gain mentorship. Networking opportunities within the company and industry. We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description JOB TITLE: Electrical Engineer LOCATION: Hawthorne, NY (on-site) TYPE: Full time, regular COMPENSATION: $95,000 - $135,000/yr Clarapath is a medical robotics company based in Westchester County, NY, dedicated to transforming and modernizing laboratory workflows. Our mission is to improve patient care by increasing efficiency, reducing costs, and enhancing the quality and consistency of laboratory processes. Our portfolio includes SectionStar™ and TrimStar Pro™, innovative electro-mechanical systems designed to automate and elevate critical steps in the histology workflow. SectionStar™ delivers high-quality, consistent tissue sections, while TrimStar Pro™ streamlines and standardizes the trimming process - together enabling laboratories to operate with greater precision, throughput, and reliability. At Clarapath, we bring together experts across engineering, data science, robotics, healthcare innovation, and laboratory operations. Our R&D team drives innovation, product enhancements, and a strong pipeline of new solutions, while our manufacturing team oversees production and quality control at our ISO-certified facility. Also based in our New York headquarters are our sales, marketing, administrative, and service teams, who work closely together to ensure every customer receives a seamless, personalized experience at every touchpoint. Role Summary: The Electrical Engineer will play a key role in the design, development, and continuous improvement of electrical systems and embedded hardware for Clarapath’s advanced SectionStar™ and TrimStar Pro™ platforms. This individual will contribute to all phases of the product development lifecycle, from concept development and circuit design through prototyping, verification, manufacturing, and field deployment. Working closely with mechanical, software, manufacturing, quality, and customer-facing teams, the Electrical Engineer will help develop reliable, manufacturable solutions that meet performance, safety, and regulatory requirements. We are seeking a hands-on engineer who enjoys solving complex technical challenges, thrives in a collaborative and fast-paced environment, and is passionate about developing innovative medical device and automation technologies that improve laboratory workflows and patient outcomes. Responsibilities: • Design, develop, test, and validate analog and digital electronic circuits for SectionStar™ and TrimStar Pro™ platforms, • Develop electrical architectures, schematics, PCB layouts, cable assemblies, and system-level wiring documentation, • Select and evaluate electrical components, sensors, motors, actuators, power supplies, and communication interfaces, • Support embedded hardware development and collaborate with software engineers on firmware integration, debugging, and system validation, • Perform electrical testing, troubleshooting, root cause analysis, and failure investigations throughout product development and production, • Create and maintain engineering documentation, including schematics, bills of materials (BOMs), design specifications, test protocols, and engineering change orders (ECOs), • Support prototype builds, design verification testing (DVT), production validation, and manufacturing transfers, • Collaborate with Manufacturing Engineering to improve product manufacturability, reliability, and serviceability, • Ensure designs comply with applicable regulatory, safety, and quality standards for medical devices, • Participate in design reviews, risk assessments, and continuous improvement initiatives, • Provide technical support for production, field service, and customer issues as needed Qualifications: • Bachelor's degree in Electrical Engineering or a related engineering discipline, • 3+ years of electrical engineering experience in product development, • Experience designing analog and digital circuits, • Experience with PCB design and schematic capture tools, • Knowledge of embedded hardware, sensors, motors, power electronics, and communication protocols, • Experience using laboratory equipment such as oscilloscopes, multimeters, logic analyzers, and power supplies, • Strong troubleshooting and analytical problem-solving skills, • Excellent communication and collaboration skills, • Ability to manage multiple projects in a fast-paced environment, • Experience developing medical devices, laboratory automation systems, robotics, or other regulated products, a plus, • Familiarity with EMC/EMI, electrical safety, and regulatory standards, a plus, • Experience supporting design verification, validation, and manufacturing, a plus, • Knowledge of embedded systems and microcontroller-based hardware, a plus, • Experience working within an ISO 13485 quality management system, a plus Company Offers: • Competitive salary, commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays), • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world, • A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description SUMMARY The Boiler Sales and Application Engineer delivers customer-facing sales and technical support within the assigned sales territory, focusing on achieving sales targets and delivering exceptional customer service. The role combines boiler plant technical expertise with advanced sales skills to provide clients with solutions for boiler applications, manage major project interactions, and work with the service and project management team to ensure successful conclusion of the sale. This role requires a fundamental understanding of boiler (ideally Cleaver-Brooks) products and a capacity for guiding engineering design with contractors and engineering teams. KEY RESPONSIBILITIES Sales and Customer Relationship Management • Conduct on-site visits within the service area to meet sales objectives and enhance client relationships., • Prepare and present price quotations and bids, ensuring alignment with material, labor, and manufacturing schedules., • Enter customer and sales data into CRM (HubSpot), and maintain detailed, up-to-date records., • Build and sustain robust relationships with key purchasing contacts, including contractors, engineers, and owners., • Monitor market trends, competitor activity, and sales indicators to inform sales strategies. Technical Sales and Engineering Support • Provide installation advice, turnkey solutions, and system design feedback to contractors and building owners, serving as the company’s technical liaison., • Lead project execution from initial design and project management stages, ensuring smooth handoff to the service and project management team., • Conduct equipment demonstrations and “Lunch and Learn” sessions for contractors, engineers, and clients., • Act as a critical technical resource for the client, offering expertise and advice with the goal of influencing the specification to include products within our distribution portfolio., • Participate in ASHRAE and similar industry events for professional development and networking. Regulatory and Product Knowledge • Maintain up-to-date knowledge of Cleaver-Brooks boiler applications and relevant industry standards, providing expertise to clients., • Coordinate factory visits for clients and engineers to enhance product understanding and customer engagement. Cross-Functional Collaboration • Work closely with project managers, inside sales engineers, and the service department to deliver cohesive, well-supported solutions to clients., • Participate in strategic initiatives to refine sales processes, improve team performance, and drive revenue growth. COMPENSATION • As this is a sales role, the compensation has a base pay and an unlimited commission potential., • The base pay is $80,000 per year., • The Commission is 10% of profit for sales up to a target, 12% of profit up to the next target, and 15% of profit up to an unlimited level., • It is not uncommon for this role to earn a total compensation of $130,000 to $160,000; and on larger project years exceed $200,000., • ESOP Benefits are also in the range of 15% to 30% of base salary. QUALIFICATIONS • Education: Bachelor’s degree in engineering, marine engineering or a related field., • Experience: Minimum 5 years in sales with a focus on boiler or heavy industrial applications., • Skills: Strong communication, customer service, and negotiation abilities; proficiency in equipment and software applications relevant to the role.\nCompany Description Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members. Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job Description About Us: Metallized Carbon Corporation For over 75 years now Metallized Carbon Corporation has been the leader in manufactured engineered carbon graphite solutions for severe service lubrication. Throughout the world, we provide products and services to various industries that deal with sophisticated equipment. Whether aerospace, food service, automotive or petrochemical, you are sure to find carbon graphite bearings, seals or other items produced by METCAR. If you are looking for a highly technical career in a challenging environment, please contact us today. Job Summary: We have an exciting and rewarding opportunity for a Manufacturing Engineer. Excellent opportunity for a highly motivated and self-directed individual to join a stable and reputable manufacturing company of engineered mechanical components. The Manufacturing Engineer is responsible for developing, standardizing, and improving manufacturing processes to ensure product quality, cost efficiency, and production reliability. This role will work closely with production, quality, and maintenance teams to optimize workflows, resolve shop-floor issues, and support continuous improvement initiatives across CNC machining, programming, set up, fabrication, and assembly operations. Responsibilities: • Develop, document, and standardize manufacturing processes, methods, and work instructions to improve productivity, consistency, and safety., • Analyze production data to identify and resolve process inefficiencies, bottlenecks, and quality issues., • Provide hands-on engineering support on the shop floor, assisting operators and supervisors in problem-solving and technical troubleshooting., • Design and implement tooling, jigs, and fixtures to improve manufacturing accuracy, setup efficiency, and repeatability., • Collaborate with Quality, Maintenance, and CNC Programming teams to verify accuracy and conformity of parts and processes to specifications., • Evaluate and recommend manufacturing methods, equipment, and technology upgrades to support cost reduction and continuous improvement initiatives., • Support new product introduction (NPI) by developing process flows, work instructions, and required tooling., • Ensure alignment with ISO/Quality Management Systems and other applicable standards and regulations., • Train production personnel on new or revised processes and support adherence to standard operating procedures. Qualifications/Requirements • Bachelor’s Degree in Mechanical Engineering or related technical discipline required., • 5–7 years of experience in a manufacturing engineering role within an industrial, machining, or fabrication environment., • Proven experience with CNC machining processes, programming, set up, tooling design, and fixture development., • Strong understanding of manufacturing methods, process optimization, and lean manufacturing principles., • Exposure to quality systems (ISO 9001, AS9100, or equivalent) and experience working cross-functionally with quality teams., • Proficient in CAD software (SolidWorks, AutoCAD, or similar) and ability to create or interpret engineering drawings and models., • Excellent analytical, problem-solving, and communication skills., • Ability to work independently and collaboratively in a fast-paced manufacturing environment. Work Environment: Manufacturing. wearing protective gear PPE, Fast paced, Benefits Package Includes: Salary commensurate with experience ($75K - $90K). Comprehensive health insurance plan, 401k retirement plan, Sick/personal days, Vacation, paid holidays, Life insurance, STD, LTD, AD&D insurance coverage. ITAR Statement This position requires compliance with ITAR requirements. Must be a “U.S. Person” (per ITAR 120.15) and are required to show proof substantiating this upon being hired. AAP/EEO Statement Metallized Carbon Corporation has been and will continue to be an equal opportunity employer. Applicants are recruited, hired, assigned and promoted without regard to race, religion, color, national origin, citizenship, sex, veteran's status, age or disability.

Job Description Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. Securitas Technology specializes in centralized installation and service for enterprise and multisite security deployments, delivering consistency and reliability for the most robust security programs. At the Securitas Technology Engineering Center of Excellence (CoE), projects are designed, engineered, and commissioned to the highest industry standards to meet our clients’ unique needs. Responsibilities: • Lead a team of engineers and engineering managers in pre- and post-sales costing and design, focusing on physical security and integrated systems., • Conduct regular reviews of the engineering backlog to ensure timely and budget-compliant project completion., • Perform engineering resource planning to align resources and skillsets with sales and operational targets, particularly in the areas of physical security and access control systems., • Implement effective measures and processes for recruiting and retaining engineering staff with expertise in security technologies., • Oversee the development and implementation of design and manufacturing standards for engineering and pre-fabrication, ensuring compliance with industry standards such as UL 294 and NFPA 731., • Lead client tours at the Engineering Center of Excellence in Elmsford, NY, showcasing advanced security solutions and engineering capabilities., • Establish goals and targets for engineering staff and generate reports to measure performance against these objectives., • Oversee training programs for engineers, with a focus on the latest security technologies and industry best practices., • Manage resource allocation on projects based on individual engineers' skill sets, particularly in areas such as video surveillance, intrusion detection, and access control. Skills/Abilities: • Comprehensive knowledge of design/build engineering processes and construction submittal packages, with a focus on physical security systems., • Extensive technical expertise in engineering and physical security standards, including knowledge of IP-based security systems and cybersecurity principles., • Superior managerial and supervisory skills., • Strong analytical and problem-solving capabilities., • Proficient in financial analysis and data interpretation., • Exceptional resource management skills., • Proficient in using AutoCAD, BlueBeam, and Revit design tools., • Proficient in Microsoft Office Suite, SharePoint, and Microsoft Teams. Education and Experience: • Bachelor’s degree in Engineering required; Master’s degree in Engineering or Business Administration preferred., • Licensed Professional Engineer (PE) preferred., • Minimum of ten years of relevant experience required, with a focus on physical security and integrated systems. We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Lead Engineer I/II role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Regional Southern CT / Tarrytown area travel to sites You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Be an ambassador that prioritizes the success of E Tech Group, our clients, and the Careers of our associates. You have: • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • A DNA comprised of collaboration and teamwork. We are seeking Application Knowledge in: • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • Plant Pax module definition is required, • HMI Programming using one or more of Rockwell FTView ME and SE, Wonderware System Platform, Inductive Automation Ignition You may have: • MQTT, understanding of server architecture Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off., • Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs.

Job Description ENGINEER MANUFACTURING ENVIRONMENT SAFTEY Location: Peekskill NY Salary: $75K to $90K ++ MANUFACTURING A MUST NO RELOCATION OFFERED SHOULD BE A HUDSON VALLEY OR CLOSE TO RESIDENT. A stable and reputable company is seeking an Facilities Engineer WITH EHS to support and maintain environmental, health, safety, and facility operations programs. This role is responsible for helping ensure compliance with OSHA regulations, company safety policies, and facility maintenance standards while promoting a safe, clean, and efficient workplace environment. The position works closely with management, maintenance personnel, vendors, and employees to support safety initiatives, coordinate training, maintain documentation, and oversee facility-related projects and repairs. Qualifications • Bachelor’s degree in Environmental Health & Safety, Occupational Safety, Facilities Management, Industrial Engineering, or a related field preferred., • 2–5 years of EHS, facilities, manufacturing, or related experience., • Knowledge of OSHA regulations and workplace safety practices., • Manufacturing industry experience strongly preferred., • in Environmental Health & Safety, Occupational Safety, Facilities Management, Industrial Engineering, or a related field preferred., • Strong organizational, documentation, and project management skills., • Excellent communication and interpersonal abilities., • Proficiency with Microsoft Office applications., • Ability to work independently and collaborate across all levels of the organization., • OSHA 10 or OSHA 30 certification preferred., • First Aid/CPR certification preferred., • Experience working in ISO 9001, AS9100, ISO 14001, and/or ISO 45001 environments preferred., • Experience coordinating contractors, vendors, and facility service providers., • Forklift certification knowledge or experience is a plus. Key Responsibilities • Support and maintain FACILITIES EHS programs to ensure compliance with OSHA regulations and company safety policies., • Conduct safety inspections, hazard assessments, incident investigations, and maintain safety documentation., • Coordinate employee safety training, emergency drills, and compliance programs including LOTO, PPE, Hazard Communication, and Emergency Action Plans., • Monitor workplace safety performance, maintain chemical inventories, and support continuous improvement initiatives., • Coordinate facility maintenance, preventive maintenance schedules, and building systems including HVAC, plumbing, lighting, fire protection, and security., • Work with outside vendors and contractors on facility repairs, maintenance services, and improvement projects., • Maintain facility records, permits, service contracts, and support waste disposal, recycling, and general facility operations. Physical Requirements • Ability to walk throughout the facility for extended periods., • Ability to lift up to 25 pounds occasionally., • Ability to work in both office and manufacturing environments., • Ability to respond to emergencies and facility issues as needed.

Job Description About Us: For over 75 years now Metallized Carbon Corporation has been the leader in manufactured engineered carbon graphite solutions for severe service lubrication. Throughout the world, we provide products and services to various industries that deal with sophisticated equipment. Whether aerospace, food service, automotive or petrochemical, you are sure to find carbon graphite bearings, seals or other items produced by METCAR. If you are looking for a highly technical career in a challenging environment, please contact us today. Position Summary The EHS/Facilities Engineer is responsible for supporting and maintaining the company’s environmental, health, safety, and facility operations programs. This position helps ensure compliance with OSHA, environmental regulations, company safety policies, and facility maintenance standards while promoting a safe, clean, and efficient workplace environment. The EHS/Facilities Engineer will work closely with management, supervisors, maintenance personnel, and employees to support safety initiatives, coordinate training, maintain documentation, and oversee facility-related projects and repairs. Essential Duties and Responsibilities: Environmental Health & Safety (EHS) • Assist in administering and maintaining company safety programs and OSHA compliance initiatives., • Coordinate and track required employee safety training., • Conduct routine safety inspections and hazard assessments throughout the facility., • Investigate workplace incidents, injuries, near misses, and unsafe conditions., • Maintain OSHA logs, safety records, SDS binders, and compliance documentation., • Assist with Lockout/Tagout (LOTO), PPE, Hazard Communication, Hearing Conservation, Respiratory Protection, and Emergency Action Plans., • Coordinate emergency evacuation drills and safety meetings., • Ensure safety signage and postings are current and properly displayed., • Monitor compliance with company safety rules and report violations to management., • Assist with workers’ compensation documentation and incident follow-up., • Coordinate vendor services related to safety compliance and environmental requirements., • Maintain chemical inventories and ensure proper storage procedures are followed., • Support continuous improvement initiatives related to workplace safety and environmental compliance. Facilities: • Coordinate facility maintenance requests and repairs., • Work with outside vendors and contractors for building maintenance and services., • Monitor building systems including HVAC, lighting, plumbing, fire protection, and security systems., • Assist with maintaining facility cleanliness, organization, and housekeeping standards., • Coordinate inspections and preventative maintenance schedules., • Maintain facility-related records, permits, and service contracts., • Support office moves, workstation setups, and facility improvement projects., • Assist in managing waste disposal and recycling programs., • Ensure common areas, break rooms, and exterior grounds are maintained appropriately., • Coordinate snow removal, landscaping, pest control, and janitorial services as needed. Qualifications: • Bachelor’s degree in Environmental Health & Safety, Occupational Safety, Facilities Management, Industrial Engineer or related field preferred., • 2–5 years of EHS, facilities, manufacturing, or related experience preferred., • Knowledge of OSHA regulations and workplace safety practices., • Experience in a manufacturing environment strongly preferred., • Strong organizational and documentation skills., • Ability to prioritize multiple projects and deadlines., • Strong communication and interpersonal skills., • Proficient in Microsoft Office programs., • Ability to work independently and collaboratively with all levels of employees., • OSHA 10 or OSHA 30 Certification., • First Aid/CPR certification., • Experience with ISO 9001, AS9100, ISO 14000 & ISO 45001 environments., • Experience coordinating contractors and facility vendors., • Forklift certification knowledge or experience. Physical Requirements: • Ability to walk throughout the facility for extended periods., • Ability to lift up to 25 pounds occasionally., • Ability to work in both office and manufacturing environments., • Ability to respond to emergencies and facility issues as needed. AAP/EEO Statement Metallized Carbon Corporation has been and will continue to be an equal opportunity employer. Applicants are recruited, hired, assigned and promoted without regard to race, religion, color, national origin, citizenship, sex, veteran's status, age or disability. ITAR Statement: This position requires compliance with ITAR requirements. Must be a "U.S. Person" (per ITAR 120.15) and are required to show proof substantiating this upon being hired.

Job Description Position Summary The EHS/Facilities Engineer is responsible for supporting and maintaining the company’s environmental, health, safety, and facility operations programs. This position helps ensure compliance with OSHA, environmental regulations, company safety policies, and facility maintenance standards while promoting a safe, clean, and efficient workplace environment. The EHS/Facilities Engineer will work closely with management, supervisors, maintenance personnel, and employees to support safety initiatives, coordinate training, maintain documentation, and oversee facility-related projects and repairs. Essential Duties and Responsibilities: Environmental Health & Safety (EHS) • Assist in administering and maintaining company safety programs and OSHA compliance initiatives., • Coordinate and track required employee safety training., • Conduct routine safety inspections and hazard assessments throughout the facility., • Investigate workplace incidents, injuries, near misses, and unsafe conditions., • Maintain OSHA logs, safety records, SDS binders, and compliance documentation., • Assist with Lockout/Tagout (LOTO), PPE, Hazard Communication, Hearing Conservation, Respiratory Protection, and Emergency Action Plans., • Coordinate emergency evacuation drills and safety meetings., • Ensure safety signage and postings are current and properly displayed., • Monitor compliance with company safety rules and report violations to management., • Assist with workers’ compensation documentation and incident follow-up., • Coordinate vendor services related to safety compliance and environmental requirements., • Maintain chemical inventories and ensure proper storage procedures are followed., • Support continuous improvement initiatives related to workplace safety and environmental compliance. Facilities: • Coordinate facility maintenance requests and repairs., • Work with outside vendors and contractors for building maintenance and services., • Monitor building systems including HVAC, lighting, plumbing, fire protection, and security systems., • Assist with maintaining facility cleanliness, organization, and housekeeping standards., • Coordinate inspections and preventative maintenance schedules., • Maintain facility-related records, permits, and service contracts., • Support office moves, workstation setups, and facility improvement projects., • Assist in managing waste disposal and recycling programs., • Ensure common areas, break rooms, and exterior grounds are maintained appropriately., • Coordinate snow removal, landscaping, pest control, and janitorial services as needed. Qualifications: • Bachelor’s degree in Environmental Health & Safety, Occupational Safety, Facilities Management, Industrial Engineer or related field preferred., • 2–5 years of EHS, facilities, manufacturing, or related experience preferred., • Knowledge of OSHA regulations and workplace safety practices., • Experience in a manufacturing environment strongly preferred., • Strong organizational and documentation skills., • Ability to prioritize multiple projects and deadlines., • Strong communication and interpersonal skills., • Proficient in Microsoft Office programs., • Ability to work independently and collaboratively with all levels of employees., • OSHA 10 or OSHA 30 Certification., • First Aid/CPR certification., • Experience with ISO 9001, AS9100, ISO 14000 & ISO 45001 environments., • Experience coordinating contractors and facility vendors., • Forklift certification knowledge or experience. Physical Requirements: • Ability to walk throughout the facility for extended periods., • Ability to lift up to 25 pounds occasionally., • Ability to work in both office and manufacturing environments., • Ability to respond to emergencies and facility issues as needed. BENEFITS PACKAGE INCLUDES: Competitive benefits package. Salary $75,000 to $90,000 depending on experience. Comprehensive health insurance plan, 401k retirement plan, Sick/personal days, Vacation, paid holidays, Life insurance, STD, LTD, AD&D insurance coverage. Located within an easy commute in tri-state area (New Jersey, New York, and Connecticut). Next to Ossining Train Station (Metro North). About Metallized Carbon Corporation: For over 75 years Metallized Carbon Corporation has been the leader in highly engineered carbon graphite solutions for severe service lubrication. Throughout the world, we provide products and services to various industries that deal with sophisticated equipment. Whether aerospace, food service, petrochemical or power, you are sure to find bearings, seals and other self-lubricating mechanical components produced by METCAR. If you are looking for a highly technical career in a challenging environment please contact us today. AAP/EEO Statement Metallized Carbon Corporation has been and will continue to be an equal opportunity employer. Applicants are recruited, hired, assigned and promoted without regard to race, religion, color, national origin, citizenship, sex, veteran's status, age or disability. ITAR Statement This position requires compliance with ITAR requirements. Must be a “U.S. Person” (per ITAR 120.15) and are required to show proof substantiating this upon being hired. Company DescriptionFor over 75 years now Metallized Carbon Corporation has been the leader in manufactured engineered carbon graphite solutions for severe service lubrication. Throughout the world, we provide products and services to various industries that deal with sophisticated equipment. Whether aerospace, food service, automotive or petrochemical, you are sure to find carbon graphite bearings, seals or other items produced by METCAR. If you are looking for a highly technical career in a challenging environment, please contact us today.For over 75 years now Metallized Carbon Corporation has been the leader in manufactured engineered carbon graphite solutions for severe service lubrication. Throughout the world, we provide products and services to various industries that deal with sophisticated equipment. Whether aerospace, food service, automotive or petrochemical, you are sure to find carbon graphite bearings, seals or other items produced by METCAR. If you are looking for a highly technical career in a challenging environment, please contact us today.

Job Description JOB TITLE: Software Controls Engineer LOCATION: Hawthorne, NY (on-site) TYPE: Full time, regular COMPENSATION: $120,000 - $160,000/yr Clarapath is a medical robotics company based in Westchester County, NY, dedicated to transforming and modernizing laboratory workflows. Our mission is to improve patient care by increasing efficiency, reducing costs, and enhancing the quality and consistency of laboratory processes. Our portfolio includes SectionStar™ and TrimStar Pro™, innovative electro-mechanical systems designed to automate and elevate critical steps in the histology workflow. SectionStar™ delivers high-quality, consistent tissue sections, while TrimStar Pro™ streamlines and standardizes the trimming process - together enabling laboratories to operate with greater precision, throughput, and reliability. At Clarapath, we bring together experts across engineering, data science, robotics, healthcare innovation, and laboratory operations. Our R&D team drives innovation, product enhancements, and a strong pipeline of new solutions, while our manufacturing team oversees production and quality control at our ISO-certified facility. Also based in our New York headquarters are our sales, marketing, administrative, and service teams, who work closely together to ensure every customer receives a seamless, personalized experience at every touchpoint. Role Summary: The Software Controls Engineer will play a key role in the design, development, implementation, and continuous improvement of the control systems and embedded software that power Clarapath's advanced SectionStar™ and TrimStar Pro™ platforms. This individual will contribute to all phases of the product development lifecycle, from system architecture and algorithm development through implementation, testing, verification, manufacturing support, and field deployment. Working closely with mechanical, electrical, software, manufacturing, quality, and customer-facing teams, the Software Controls Engineer will develop reliable, scalable, and maintainable control software that meets performance, safety, and regulatory requirements. We are seeking a hands-on engineer who enjoys solving complex automation and motion control challenges, thrives in a collaborative and fast-paced environment, and is passionate about developing innovative medical device and robotics technologies that improve laboratory workflows and patient outcomes. Responsibilities: • Design, develop, implement, and maintain embedded software and control algorithms for motion control systems, actuators, sensors, and peripheral devices, • Develop software architecture and control logic using C/C++, Python, and other appropriate programming languages, • Design and optimize closed-loop control systems for precision motion applications utilizing servo motors, stepper motors, encoders, and other electromechanical components, • Collaborate with Electrical and Mechanical Engineering teams to integrate hardware and software into complete system solutions., • Develop communication interfaces using protocols such as CAN, RS-232, RS-485, Ethernet, USB, SPI, I2C, and UART., • Create software requirements, design specifications, verification protocols, and technical documentation in compliance with medical device design controls, • Participate in system architecture discussions and technical design reviews, • Perform software debugging, root cause analysis, and issue resolution throughout development and post-release support, • Develop automated testing tools and software validation procedures to improve product quality and reliability, • Support prototype development, system integration, and engineering verification testing, • Assist Manufacturing and Service teams with software releases, troubleshooting, and continuous product improvements., • Participate in risk management activities including software hazard analysis, FMEA, and mitigation implementation, • Support regulatory submissions and compliance efforts by generating appropriate documentation and maintaining design history files., • Contribute to continuous improvement initiatives focused on software quality, maintainability, cybersecurity, and system performance., • Provide technical support during customer installations, field investigations, and product issue resolution as needed Qualifications: • Bachelor's degree in Computer Engineering, Electrical Engineering, Computer Science, Software Engineering, or a related engineering discipline, • 3–7 years of experience developing embedded software or control systems for electromechanical products, • Strong programming experience in C/C++, • Experience with embedded Linux or real-time operating systems (RTOS), • Experience developing motion control software for precision electromechanical systems, • Strong understanding of software architecture, object-oriented programming, and software design principles, • Experience interfacing with sensors, motors, actuators, and industrial communication protocols, • Familiarity with source control systems such as Git, • Experience using debugging tools including oscilloscopes, logic analyzers, and protocol analyzers., • Strong analytical, troubleshooting, and problem-solving skills, • Excellent written and verbal communication skills, • Ability to work effectively in a collaborative, multidisciplinary engineering environment, • Experience developing software for medical devices or other regulated industries, a plus, • Knowledge of IEC 62304 software lifecycle processes, a plus, • Familiarity with ISO 13485 quality management systems, a plus, • Experience with FDA Design Controls and Design History Files (DHF), a plus, • Experience developing software for robotics, automation, or precision instrumentation, a plus, • Knowledge of machine vision integration, image processing, or computer vision, a plus, • Experience with Python scripting for automation and test development, a plus, • Familiarity with cybersecurity best practices for connected medical devices, a plus, • Experience with Agile software development methodologies, a plus, • Knowledge of Jira, Confluence, and requirements management tools, a plus, • Experience with hardware-in-the-loop (HIL) testing or simulation environments, a plus Company Offers: • Competitive salary, commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays), • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world, • A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description JOB TITLE: Mechanical Engineer LOCATION: Hawthorne, NY (on-site) TYPE: Full time, regular COMPENSATION: $90,000 – $130,000/yr Clarapath is a medical robotics company based in Westchester County, NY, dedicated to transforming and modernizing laboratory workflows. Our mission is to improve patient care by increasing efficiency, reducing costs, and enhancing the quality and consistency of laboratory processes. Our portfolio includes SectionStar™ and TrimStar Pro™, innovative electro-mechanical systems designed to automate and elevate critical steps in the histology workflow. SectionStar™ delivers high-quality, consistent tissue sections, while TrimStar Pro™ streamlines and standardizes the trimming process - together enabling laboratories to operate with greater precision, throughput, and reliability. At Clarapath, we bring together experts across engineering, data science, robotics, healthcare innovation, and laboratory operations. Our R&D team drives innovation, product enhancements, and a strong pipeline of new solutions, while our manufacturing team oversees production and quality control at our ISO-certified facility. Also based in our New York headquarters are our sales, marketing, administrative, and service teams, who work closely together to ensure every customer receives a seamless, personalized experience at every touchpoint. Role Summary: The Mechanical Engineer will play a key role in the design, development, and continuous improvement of mechanical systems and assemblies for Clarapath’s advanced SectionStar™ and TrimStar Pro™ platforms. This individual will contribute to all phases of the product development lifecycle, from concept generation and prototyping through verification, manufacturing, and field deployment. Working closely with electrical, software, manufacturing, quality, and customer-facing teams, the Mechanical Engineer will help develop robust, manufacturable solutions that meet performance, reliability, and regulatory requirements. We are seeking a hands-on engineer who enjoys solving complex technical challenges, thrives in a collaborative and fast-paced environment, and is passionate about developing innovative medical device and automation technologies that improve laboratory workflows and patient outcomes. Responsibilities: • Design and develop mechanical components, assemblies, and systems for robotic and automated laboratory equipment, • Create detailed 3D CAD models, drawings, and engineering documentation, • Perform engineering analyses, tolerance stack-ups, and design calculations to validate product performance, • Prototype, test, and troubleshoot mechanical designs to improve functionality, reliability, and manufacturability, • Collaborate with electrical and software engineers to integrate mechanical, electrical, and control systems, • Support product verification and validation activities, including test planning, execution, and documentation, • Work closely with manufacturing to transition designs into production and resolve production-related issues, • Participate in design reviews and implement design improvements based on feedback and testing results, • Ensure compliance with applicable quality system requirements, including ISO 13485 and FDA design control processes, • Assist in root cause investigations, corrective actions, and continuous improvement initiatives, • Maintain accurate engineering documentation, including BOMs, drawings, specifications, and change orders Qualifications: • Bachelor's degree in Mechanical Engineering or related engineering discipline, • 2+ years of mechanical engineering experience; medical device, robotics, automation, or laboratory equipment experience preferred, • Proficiency with 3D CAD software (SolidWorks preferred), • Experience creating manufacturing drawings and engineering documentation., • Understanding of mechanical design principles, materials selection, GD&T, and tolerance analysis, • Hands-on experience with prototyping, testing, and troubleshooting mechanical systems, • Strong analytical and problem-solving skills, • Excellent communication and collaboration skills, • Experience in medical devices, robotics, automation, or electromechanical systems, a plus, • Familiarity with Design for Manufacturability (DFM) and Design for Assembly (DFA), a plus, • Experience working within regulated environments and quality management systems, a plus, • Knowledge of ISO 13485, FDA design controls, or similar regulatory requirements, a plus Physical Requirements: • Ability to work in a laboratory, manufacturing, and office environment, • Ability to occasionally lift and move items up to 25 pounds, • Ability to use hand tools and engineering test equipment as needed Company Offers: • Competitive salary, commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays), • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world, • A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Position Overview: The Hudson Clean Heat Applications Engineer will be responsible for the design, coordination, and implementation of mechanical, electrical, and plumbing systems for commercial, industrial, and institutional projects utilizing the latest in water source heat pump technology and any other non-carbon based heating and cooling technology. This role requires applied engineering experience in MEP disciplines and collaboration with multidisciplinary teams to ensure effective project delivery. The engineer will support the Sales Team in design development, construction documentation, and the Project Management team in the project execution, ensuring compliance with applicable codes, standards, and project specifications while meeting the project timelines and cost targets. Key Responsibilities: • Design & Engineering Development, • Prepare detailed design layouts, calculations, and specifications for heat pump, electrical, and plumbing systems., • Perform equipment selection and sizing, load calculations, and energy analysis., • Review and apply relevant building codes, standards (ASHRAE, NFPA, NEC, IPC), and regulatory requirements., • Develop schematic designs and support design development and construction documents., • Project Coordination, • Collaborate with the Sales Team on the pre-sale engineering characteristics of projects., • Collaborate with architects, structural engineers, contractors, and other disciplines to ensure integrated design solutions., • Coordinate MEP systems across project teams to resolve conflicts and design issues., • Support the project manager in preparing design packages for client review and approval., • Participate in project meetings and communicate engineering concepts to both technical and non-technical stakeholders., • Construction & Implementation Support, • Review submittals, shop drawings, and Requests for Information (RFIs) during the construction phase., • Together with the Project Manager, conduct site visits and inspections to monitor compliance with design intent and installation quality., • Assist in commissioning support and functional performance testing of MEP systems., • Technical Documentation & Reporting, • Prepare engineering reports, technical specifications, basis of design documents, and other project deliverables., • Maintain accurate documentation throughout the project lifecycle, including design revisions and field observations., • Participate in value engineering exercises and support lifecycle cost analysis., • Compliance & Safety, • Ensure that all designs comply with environmental, health, and safety regulations., • Incorporate sustainable design principles and energy efficiency best practices where applicable., • Continuous Improvement & Professional Development, • Stay current with technological advancements, industry best practices, and code changes in MEP disciplines., • Pursue professional development opportunities, including licensure (e.g., PE, LEED AP). Qualifications: • Bachelor’s degree in mechanical, Electrical, or Architectural Engineering, or related field., • Approximately 3-5 years of experience in MEP design and engineering., • Proficiency in design software (AutoCAD MEP, Revit, and/or similar BIM tools)., • Familiarity with energy modeling software and calculation tools is preferred., • Strong understanding of construction processes and building systems integration., • Effective communication and coordination skills., • EIT certification preferred; PE license is advantageous but not mandatory at this level. All candidates must be legally permitted to work in the United States of America, pass a background check, a drug screening and reliably commute to both the Sleepy Hollow, NY office and on occasion to a job site. The Candidate must have their own auto insurance in their own name and meet corporate minimums for coverage. Company DescriptionMiller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

$60 - $100/hourpayCUDAC++GLSLWebGPUmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Role Title: CUDA Engineering Expert Role Type: Contractor Location: Remote micro1 is engaging CUDA Engineering Experts to contribute to a cutting-edge customer project focused on GPU kernel optimization in collaboration with a leading AI lab. In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input. No prior experience in AI is required — your domain knowledge is what matters. Scope of Work • Analyze, profile, and optimize GPU kernels using CUDA and relevant profiling tools to maximize computational throughput on modern hardware., • Collaborate with project stakeholders to assess and identify kernel bottlenecks, proposing targeted optimization strategies., • Refactor C++ and CUDA codebases for improved maintainability, efficiency, and adaptability across diverse GPU architectures., • Implement shader logic and graphics workflows using GLSL and WebGPU, ensuring seamless integration with existing pipelines., • Document key findings, optimization steps, and performance improvements with clear, actionable reports and technical communication., • Contribute expertise to design discussions, supporting the evaluation of new GPU-based approaches and performance metrics., • Stay informed on advancements in GPU programming and share relevant insights to enhance project outcomes. Preferred Qualifications • Demonstrated expertise in CUDA programming, with a strong track record of performance-tuning GPU kernels., • Advanced C++ development skills, particularly in high-performance computing environments., • Hands-on experience with GLSL and WebGPU for graphics and compute shader development., • Proficiency using GPU profilers (such as Nsight, Visual Profiler, or similar tools) for guided optimization., • Strong analytical abilities to evaluate and reason about kernel performance across hardware generations., • Excellent written and verbal communication skills—clear documentation and technical reporting are essential., • Experience collaborating in remote, cross-disciplinary project settings is a plus.

$50 - $120/hourpayGodotGame Developmentmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Job Title: Godot Game Engine Expert Job Type: Contract Location: Remote Job Summary Join our customer's team as a Godot Game Engine expert, where you will have the opportunity to work on cutting-edge interactive experiences in a dynamic and collaborative environment. You will leverage your deep knowledge of Godot to drive the technical direction of game projects, ensuring robust architecture and seamless gameplay. This position is ideal for professionals passionate about creating high-quality games and excelling in both communication and technical domains. Key Responsibilities • Design, implement, and optimize gameplay systems and features using the Godot Game Engine., • Collaborate closely with designers, artists, and other developers to deliver polished and engaging player experiences., • Architect and maintain clean, scalable, and well-documented codebases., • Troubleshoot and resolve complex technical issues throughout the development lifecycle., • Contribute to the evaluation and selection of technical solutions and tools related to the Godot ecosystem., • Mentor and support team members in best practices, Godot workflows, and robust coding standards., • Participate actively in sprint planning, code reviews, and quality assurance processes. Required Skills and Qualifications • Deep expertise with the Godot Game Engine (GDScript, C#, or VisualScript)., • Proven track record of shipping commercial or high-quality independent titles using Godot., • Strong understanding of 2D/3D game development pipelines, asset integration, and performance optimization., • Ability to communicate complex technical concepts clearly in both written and verbal form., • Experience collaborating in a remote, distributed team environment., • Solid problem-solving abilities and passion for learning new technologies., • Demonstrated ability to produce clean, maintainable, and efficient code. Preferred Qualifications • Experience contributing to open-source Godot projects or plugins., • Background in gameplay, UI/UX, or multiplayer networking systems., • Exposure to agile development methodologies and tools.

mechanical engineeringtechnical document analysisproblem-solvingwritten and verbal communicationdata analysisattention to detailself-managementinterdisciplinary collaborationtechnical content creationdata quality assurancemicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Job Title: Mechanical Engineer Job Type: Contractor Location: Remote Rate: 20$-50$ per task Job Summary: In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input. No prior experience in AI is required — your domain knowledge is what matters. Key Responsibilities: • Analyze technical documents and extract key information relevant to your domain expertise, • Generate, review, and refine questions and solutions based on real-world mechanical engineering scenarios, • Collaborate with multidisciplinary teams to ensure accuracy and depth of data and analysis, • Provide detailed written and verbal feedback on document clarity, technical accuracy, and effectiveness, • Apply advanced subject matter knowledge to evaluate and solve complex engineering problems, • Work independently, managing your time to deliver high-quality outputs with minimal supervision, • Contribute to the continuous improvement of data quality and project processes Required Skills and Qualifications: • 2-6 years of professional or academic experience in mechanical engineering or a closely related field (lab, workplace, or academia), • Strong reading comprehension skills, with proven ability to analyze and interpret technical documents, • Exceptional English communication skills, both written and verbal, • Demonstrated experience in creating or evaluating technical content, such as reports, studies, or problem sets, • Ability to work independently and efficiently, with excellent self-management, • High attention to detail and commitment to data accuracy, • Experience interfacing with technical documentation and performing analytical tasks Preferred Qualifications: • Advanced degree (Master’s or PhD) in Mechanical Engineering, Chemistry, Physics, or Biology, • Previous experience contributing to interdisciplinary or research-driven projects, • Familiarity with data-driven analysis or training data preparation

About the Company If you’re passionate about future-focused innovation and joining a team where your ideas are valued and your skills are honed, we invite you to join Ultrafabrics as we reshape the world of high-tech performance fabrics. At Ultrafabrics, we combine high-performance, comfort, and sustainability to support the visions of leading designers and manufacturers in over 10 global industries. About the Role Experienced product engineer supporting the development and technical validation of polyurethane (PUR) textile products for furniture, hospitality, A&D, healthcare, RV, marine, aviation, and other specialized markets. As part of the UFI Engineering team, the Senior Product Engineer works with Product Development, Quality, Sales, R&D, and partner-mill technical teams to provide engineering input during new product development and resolve technical issues with mills in Japan, Mexico, and other locations. Responsibilities • Understand key market and customer technical requirements for synthetic leather materials., • Participate in industry associations, including ACT, AATCC, and BIFMA, to stay current on requirements., • Partner with Product Development and external companies to develop value-added processes such as lamination, perforation, embossing, embroidery, and printing., • Develop best practices for customer processes, including cut-and-sew, upholstery, and lamination., • Benchmark Ultrafabrics products against leather, fabric, and competitor synthetic materials., • Research sustainable fiber and backcloth options aligned with company initiatives., • Provide technical data for product information and sales sheets., • Maintain OPRs for partner mills and track ECNs for production changes., • Research chemical treatments, including antimicrobial, anti-pinking, PFOA-free stain resistance, and matte surface agents., • Participate in trade shows and conferences to support business development., • Collaborate cross-functionally to ensure key development deliverables are met. In Product Validation • Assess product capability against current and new customer specifications., • Plan validation testing, obtain quotes, and coordinate work with internal and external labs., • Maintain test records, draw conclusions, and communicate key findings to Sales and Marketing., • Oversee field and pilot studies, including variables and test frequency., • Prepare testing and field-study summaries for analysis., • Report milestones, risks, and issues accurately and on time. In Product Quality and Customer Support • Support cross-functional involvement in quality processes., • Assist Quality with customer quality claims, root cause analysis, and corrective-action documentation., • Evaluate the suitability of cleaners and disinfectants for use on Ultrafabrics products based on their chemical composition., • Perform other related tasks and activities as needed. Qualifications • M.S. or Ph.D. in Polymer Science, Polymer Chemistry, Chemical Engineering, or Textile Engineering, with working knowledge of urethane prepolymers, solvent- and waterborne coatings, and analytical chemistry; or, • 10+ years of product engineering experience in coated textiles, materials science, polymer science, or textile manufacturing, with PU manufacturing knowledge. Required Skills • Knowledge of backcloth constructions, fibers, fabrics, yarns., • Knowledge of laminated foams, cut and sew, upholstery, and indoor/outdoor furniture applications., • Familiarity with the Association for Contract Textiles (ACT) performance guidelines for coated textiles, and ability to interpret customer specifications, test methods, and technical data., • Familiarity with GC-MS, HPLC-MS, FTIR, DSC, SEM, and TGA is a plus., • Project management skills to maintain schedules and meet customer launch milestones., • Ability to work effectively across Japanese, European, Mexican, and American teams; Spanish or Japanese fluency is a plus. Preferred Skills • Specific work knowledge and experience (not a requirement, but an advantage) OEKO-TEX Standard 100 requirements., • European FR testing methods ASTM E84 Unadhered, BS 5852 Source 0, 1 & 5 (Cig, Match & Crib 5), BS EN 1021 Parts 1 & 2 (EU Cig & Match), IMO FTPC Part 8, UNI 9175:2010, ECE R118 Annex 6,7,8), and FR chemistry application by third-party companies., • European health care products regulations per DIN EN ISO 10993 (citotoxicity, sensitivity, irritation, chemical characterization)., • Indoor Advantage Gold (IAG) certification VOC testing requirements per California Department of Public Health (CDPH) Standard Method v1.2 (CA 01350)., • Health Product Declarations (HPD). Pay range and compensation package [Pay range or salary or compensation] Equal Opportunity Statement Ultrafabrics is committed to diversity and inclusivity in the workplace.

As a Technical Engineer in the Army National Guard, you will develop the skills necessary to help build, plan, and repair airstrips, docks, barracks, roads, and other projects. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tu

The Operating Engineer/Journeyman is responsible for managing the installation of upgrades for commercial landscape maintenance accounts.

This Opportunity WSP USA is currently initiating a search for Lead Professional, Structural Engineering to join our dynamic team in Valhalla, New York . Provides high level technical expertise and guidance for the investigation, remediation, improvement, and/or construction of bridges and infrastructure projects in the public sector. Tasks include the design, development, planning, and construction of structures or structural elements for bridges. Substantiates reports and documentation to advise on material, installation, design, and construction specifications. Ensures that responsibilities are delivered and adhered to with a level of quality that meets or exceeds acceptable industry standards for design, safety, structural soundness, and functionality. Your Impact + Apply high-level structural and civil engineering techniques and processes to identify improvements for various infrastructure project phases including concept development, preliminary design, final design, procurement, construction support, and operation. + Perform professional structural engineering work and conduct research and inspections of proposed and existing site conditions to determine conformance with applicable rules, standards, and construction or operating permits. + Develop construction plans, specifications, and cost estimates; preparing construction safety and phasing plans, and updating infrastructure layout plans that require coordination with owners, other disciplines, sub-consultants, and clients. + Involved from project inception to completion in the management of design, construction, rehabilitation, and remediation of infrastructure projects, ensuring durability of materials and structural soundness from loads and pressures caused by environmental and/or human influence. + Oversee and monitor cross-functional teams of engineers, architects, planners, and scientific professionals to execute project work on mid-level and/or multiple concurrent projects, including budgets, tracking hours and expenses, task completion, cost and quantities of materials/equipment/labor, technical calculations, permit applications, construction, compliance documentation, and regulatory and technical analysis memos. + Coordinate, review and approve design plans, ensuring data integrity and work is compliant with all applicable codes, ordinances, and regulations. + Prepare data and visualizations such as tables, charts, reports, sketches, calculations, cross-sections, and 2D/3D illustrations for the interpretation or presentation of more complex data, findings, and/or analyses. + Prepare comprehensive technical reports and presentations that explain research, concepts, and recommendations to prevent, control, restore, or address structural, environmental, design, and/or construction issues or opportunities. + Analyze, evaluate, and interpret data obtained during site investigations, offering input with developing action plans for moderate- to high-level risk mitigation activities. + Prepare and implement Risk Management and site Health and Safety Plans (HASPs). + Remain current in latest structural engineering techniques and practices. + Exercise responsible and ethical decision-making regarding company funds, resources and conduct, and adhere to WSP's Code of Conduct and related policies and procedures. + Perform additional responsibilities as required by business needs. Who You Are Required Qualifications + Bachelor's Degree in Structural or Civil Engineering, or closely related discipline (or equivalent experience). + 7 to 10 years of relevant post education experience in engineering discipline and prior structural or civil design experience. + Registered Professional Engineer in New York State or able to obtain via reciprocity. + Proficient with structural engineering principles, practices, process, design/build, and their application to project work-related issues. + Knowledge and experience with infrastructure planning, design, and construction management; including active involvement in a variety of rehabilitation, new design, and construction projects. + Well-defined specific knowledge of relevant structural and civil construction laws, codes, regulations, compliance practices, and record-keeping requirements. + Well-developed ability to make technical computations and calculations involving the application of engineering principles, understanding plans and specifications, and making factual comparisons to the appropriate regulations. + Highly effective interpersonal and communication skills when interacting with others, expressing ideas effectively and professionally to an engineering and non-engineering audience. + Demonstrated high-level of self-leadership with attention to detail, multi-tasking, and prioritization of responsibilities in a dynamic work environment. + Works independently with minimal oversight and provides guidance and leadership to junior team, interns, and/ or project members, with strict adherence to QA/QC. + Proven track record of upholding workplace safety and ability to abide by WSP's health, safety and drug/alcohol and harassment policies. + Ability to work schedules conducive to project-specific requirements that may extend beyond the typical workweek. + Occasional travel may be required depending on project-specific requirements. Preferred Qualifications: + Master's Degree in Structural Engineering. + Ability to use software to develop 3D designs and digital models such as REVIT, Tekla, and/or OpenBridge Designer. + Experience in structural engineering task leadership, and/or managing small to mid-size projects. WSP Benefits: WSP provides a comprehensive suite of benefits focused on providing health and financial stability throughout the employee's career. These benefits include coverage related to medical, dental, vision, disability, and life; retirement savings; paid sick leave; paid vacation (or other personal time); paid parental leave; and paid time off for purposes of bereavement, voting, and/or attendance at naturalization proceedings. Compensation: Expected Salary (all locations): $ $98,300 - $175,230 WSP USA is providing the compensation range and general description of other compensation and benefits that the company in good faith believes it might pay and/or offer for this position based on the successful applicant's education, experience, knowledge, skills, and abilities in addition to internal equity and geographic location. WSP USA reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant's sex or other status protected by local, state, or federal law. #LI-JL1 About WSP WSP USA is the U.S. operating company of WSP, one of the world's leading engineering and professional services firms. Dedicated to serving local communities, we are engineers, planners, technical experts, strategic advisors and construction management professionals. WSP USA designs lasting solutions in the buildings, transportation, energy, water and environment markets. With more than 15,000 employees in over 300 offices across the U.S., we partner with our clients to help communities prosper. www.wsp.com WSP provides a flexible and agile workplace model while meeting client needs. Employees are also afforded a comprehensive suite of benefits including medical, dental, vision, disability, life, and retirement savings focused on providing health and financial stability throughout the employee's career. At WSP, we want to give our employees the challenges they seek to grow their careers and knowledge base. Your daily contributions to your team will be essential in meeting client objectives, goals and challenges. Are you ready to get started? WSP USA (and all of its U.S. companies) is an Equal Opportunity Employer Race/Age/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disability or Protected Veteran Status. The selected candidate must be authorized to work in the United States. NOTICE TO THIRD PARTY AGENCIES: WSP does not accept unsolicited resumes from recruiters, employment agencies, or other staffing services. Unsolicited resumes include any resume or hiring document sent to WSP in the absence of a signed Service Agreement where WSP has expressly requested recruitment/staffing services specific to the position at hand. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation - no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service.

Driven by a commitment to research, quality, and service, PDI provides innovative products, educational resources, training, and support to prevent infection transmission and promote health and wellness. Encompassing three areas, our Healthcare, Sani Professional and Contract manufacturing divisions, we develop, manufacture, and distribute leading edge products for North America and the world. We have several locations across the US and are looking for new Associates to join our team! POSITION PURPOSE The Sr. Manager, Capital Programs & Site Readiness will drive the planning, execution, and integration of multiple concurrent capital programs, ensuring projects are delivered in alignment with business priorities, engineering standards, production readiness requirements, and long-term operational strategy. This role serves as a key cross-functional leader, enabling successful project delivery and a smooth transition from capital execution to stable site operations.ESSENTIAL FUNCTIONS AND BASIC DUTIESPortfolio LeadershipOwn and drive execution of multiple concurrent capital programs across site expansion, product commercialization, and infrastructure improvementsEstablish priorities, sequencing, and resource alignment across the project portfolioEnsure projects are executed in compliance with applicable safety, environmental, regulatory, quality, and engineering standards.Site Readiness & Business IntegrationEnsure alignment between project delivery and production readiness requirementsDrive integration across Engineering, Manufacturing, Maintenance, Quality, and Supply ChainEnsure commissioning, qualification, startup, training, spare parts, maintenance plans, SOPs, staffing readiness, and operational handoff requirements are defined and executed.Ensure successful transition from project completion to stable operationsCross-Functional LeadershipLead and influence cross-functional teams without direct authorityAct as central coordination point across internal stakeholders and external partnersResolve conflicts and remove barriers to executionExecution OversightEnsure projects are delivered on time, within budget, and aligned to scopeProvide oversight to project managers, contractors, and vendorsDrive proactive risk identification and mitigationManage capital budgets, forecasts, cash flow, change controls, and cost-to-complete reporting across assigned programs.Strategic AlignmentSupport development of capital plans, project charters, business cases, budget estimates, and investment prioritization recommendations.Align capital projects with long-term operational and reliability strategyEnsure consistency with engineering standards and site capabilitiesVendor & Stakeholder ManagementOversee performance of external partners including contractors, consultants, and equipment suppliersEnsure effective communication and alignment with leadershipPERFORMANCE MEASUREMENTSOn-time delivery of capital project portfolioSuccessful production readiness for new products and capacity expansionsEffective cross-functional alignment and executionReduction in project-related delays and cost overrunsSmooth transition from project completion to stable operationsQUALIFICATIONSEDUCATION/CERTIFICATION:Bachelor’s Degree in Engineering (required)Master’s Degree or advanced technical/business degree (preferred)Professional Engineer (PE) License (preferred)REQUIRED KNOWLEDGE:Strong knowledge of capital project portfolio management, engineering project execution, manufacturing operations, and site readiness requirements.Demonstrated understanding of project budgeting, scheduling, resource planning, risk management, contractor/vendor oversight, commissioning, startup, and operational handoff.Familiarity with engineering standards, safety and compliance requirements, capital investment prioritization, and long-term operational reliability strategy.EXPERIENCE REQUIRED:Experience: 10+ years of progressive experience in engineering, capital projects, manufacturing operations, facilities, or project/program management, including experience leading site expansion, infrastructure, or capacity growth projects.Leadership: Demonstrated ability to lead cross-functional teams in a matrix environment and influence stakeholders without direct authority.Project Management: Strong knowledge of project controls, scheduling, budgeting, risk management, vendor management, and capital governance processes.Industry Experience: Experience in manufacturing, industrial operations, food, pharmaceutical, chemical, packaging, or regulated production environments preferred.SKILLS/ABILITIES:Strong knowledge of capital project planning and execution, including scope development, budgeting, scheduling, forecasting, risk management, change control, contractor oversight, commissioning, startup, and project closeout.Demonstrated understanding of manufacturing operations, site expansion, infrastructure development, production readiness, maintenance readiness, quality readiness, and operational handoff.Ability to lead cross-functional teams, influence without direct authority, manage external partners, resolve execution barriers, and communicate effectively with senior leadership.Familiarity with engineering standards, safety requirements, regulatory expectations, capital governance, and long-term reliability and operational strategy.WORKING CONDITIONSNo hazardous or significantly unpleasant conditions.Applicants must be legally authorized to work in the United States without the need for current or future employer-sponsored visa sponsorship. SALARY RANGE$160,000 - $170,000 annually, plus bonusPDI is pleased to offer a comprehensive and affordable benefits program to our associates, which includes:Medical & prescription drug coverageDental / Vision plan401(k) savings plan with company matchBasic and supplemental life insuranceFlexible Spending Accounts (FSAs)Short- and long-term disability benefitsHealth Advocacy Program / Employee Assistance Program (EAP)Many other voluntary benefit plans and perks such as: Legal assistance, critical illness, hospital indemnity and accident coverage, discounted home/auto/rental insurance, employee discounts and pet insurance, tuition assistance, referral bonus program, paid parental leave, a health club rebate program and moreAt PDI, we are also committed to helping our associates maintain a healthy and sustainable work/life balance and are proud to provide: Sick leave, generous vacation and holiday time and paid parental leave #LI-BK1Job SummaryRequisition Number: SENIO006678Job Category: ManagersSchedule: Full-Time

Meet all operational standards related to the Engineering Department. Conduct walk-throughs and visually assess the safe and efficient maintenance and operation of the hotel structure, systems and equipment. Establish and maintain Rooms and Public Area Preventive Maintenance Program and consistently keep updated records. Act in concert with hotel management team and property General Manager. Hire, train, supervise, coach and counsel associates, including managers. Ensure grounds are maintained to create superior curb appeal. Implement hotel's safety and emergency policies and procedures (ie evacuations, first aid, etc) to including removing all safety hazards, following company's OSHA Hazcom program and safe lifting techniques. Provide adequate inventory of parts, supplies, tools and materials for the department. Establish and maintain an efficient inventory and purchasing system. Maintain current permits and licenses for building and physical plant. Work and coordinate all activities, as needed, with 3rd party vendors, particularly those needed for physical plant and maintenance functions. Perform other duties as assigned, including those needed to participate in overall leadership of the hotel. Knowledge, Skills, and Competencies: Previous hotel engineering experience required, including HVAC, electrical, plumbing, commercial kitchen and general building construction Vocational training, associate's degree, certification and/or apprenticeship in one or more area; state certification or licensure where required Must be able to read and interpret drawings, diagrams and blue prints. Read and understand test equipment and measuring devices Strong business communication skills verbal and written Strong presentation skills and ability to train hourly staff members High work ethic and self-initiative Strong computer skills in Microsoft Suite Some travel may be required Regular attendance according to established guidelines May be required to work varying schedules to reflect the business needs of the property Must possess basic computational ability Focus and maintain attention to multiple tasks and priorities, and complete work assignments on time despite frequent interruptions, including in high pressure situations Ability to maintain excellent relationships with staff and maintain staff and guest confidentiality at all times Ability to converse calmly with upset associates, superiors and guests in intense emotional situations Ability to participate in, and lead departmental and/or hotel team meetings Understanding and adherence to Material Safety Data Sheet (MSDS) documents, as well as hotel safety procedures Physical Requirements (In-Office Role) Salary $70 - $77 year Ability to work in a standard office environment. Prolonged periods of sitting at a desk and working on a computer. (6-8 hours a day) Occasional standing and walking throughout the workday. Frequent fine motor skills, use of hands and fingers for keyboarding/typing, utilizing a mouse or trackpad, writing, and operating office equipment. Ability to communicate effectively verbally and in writing. Occasionally required to stand, walk, bend, reach, or carry items. Ability to lift and/or move 1025 pounds as needed (e.g., files, office supplies). Visual ability to read from a computer screen and printed materials including close visual focus for extended periods and color differentiation (for certain roles). Ability to hear and participate in conversations and meetings, use phone and/or headset Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the role.

Participate in design reviews with product engineers and repair development engineers. Metallurgical, Materials, Chemical, Aerospace or Mechanical Engineering preferred) 2+ years' of experience as a Welding Engineer Experience working experience in a manufacturing environment is preferred. The En

But wait, there's a great upside: in exchange for your flexibility, we offer excellent pay, hotel discounts, F&B discounts and the opportunity to be part of an anything-but-standard growing hotel company. Communicate with hotel department heads to become aware of maintenance needs and ensure timely

Operating Engineer - Critical Environments. The Operating Engineer - Critical Environments is responsible for maintaining 100% uptime of all facility systems in a mission-critical data center environment.

The Operating Engineer/Journeyman is responsible for managing the installation of upgrades for commercial landscape maintenance accounts.

Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s).Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessment

REQUIREMENTS: 8 years of Salesforce experience, including hands-on technical architecture and implementation experience Strong experience with Salesforce Service Cloud and core Salesforce platform capabilities * Proven experience designing Salesforce integrations with legacy systems and enterpri

Operating Engineer - Critical Environments. The Operating Engineer - Critical Environments is responsible for maintaining 100% uptime of all facility systems in a mission-critical data center environment.

WSP is currently initiating a search for a Lead Professional, Signal Engineer-CBTC to join our Transit and Rail/Systems Engineering in on of our New York or New Jersey offices. WSP, one of the world's leading engineering and professional services firms. Dedicated to serving local communities,

Job DescriptionPart-Time On-Call Small Engine Mechanic Rolling Suds is seeking an experienced small engine mechanic to maintain and repair our commercial power-washing equipment on an as-needed basis. This is a flexible, on-call role for someone who can respond quickly when equipment issues arise. Responsibilities include diagnosing and repairing gas engines, pressure-washing pumps, burners, booster pumps, electrical components, plumbing, hoses, and related equipment. The mechanic will also perform preventative maintenance and help minimize equipment downtime. Qualifications: • Strong small-engine diagnostic and repair experience, • Experience with Honda commercial engines, pumps, generators, or pressure-washing equipment preferred, • Ability to work independently and respond on relatively short notice, • Must provide reliable, high-quality repairs This is a part-time, flexible position. Compensation will be structured as an agreed-upon percentage of company revenue.

Join CBRE as a Union Mobile HVAC Engineer supporting a dynamic retail portfolio across the Armonk/Hudson area.

Job Description JOB TITLE: Field Engineering Technician LOCATION: Hawthorne, NY (on-site) + regular travel (50%-75%) to customer sites across U.S. TYPE: Full time, regular COMPENSATION: $30.00/hr - $45.00/hr Clarapath is a medical robotics company based in Westchester County, NY, dedicated to transforming and modernizing laboratory workflows. Our mission is to improve patient care by increasing efficiency, reducing costs, and enhancing the quality and consistency of laboratory processes. Our portfolio includes SectionStar™ and TrimStar Pro™, innovative electro-mechanical systems designed to automate and elevate critical steps in the histology workflow. SectionStar™ delivers high-quality, consistent tissue sections, while TrimStar Pro™ streamlines and standardizes the trimming process - together enabling laboratories to operate with greater precision, throughput, and reliability. At Clarapath, we bring together experts across engineering, data science, robotics, healthcare innovation, and laboratory operations. Our R&D team drives innovation, product enhancements, and a strong pipeline of new solutions, while our manufacturing team oversees production and quality control at our ISO-certified facility. Also based in our New York headquarters are our sales, marketing, administrative, and service teams, who work closely together to ensure every customer receives a seamless, personalized experience at every touchpoint. Role Summary: The Field Engineering Technician will play a critical role in supporting the installation, operation, and service of Clarapath’s SectionStar™ and TrimStar Pro™, our advanced electro-mechanical systems, at customer sites. This position requires strong technical aptitude, hands-on troubleshooting skills, and the ability to work independently in dynamic field environments. Working closely with our engineering, manufacturing, and customer support teams, this individual will ensure successful deployments, perform on-site diagnostics and repairs, and provide valuable feedback to improve product performance and reliability. We are seeking a proactive, detail-oriented technician who thrives in fast-paced settings, communicates effectively with customers, and is eager to apply problem-solving skills to real-world technical challenges. Responsibilities: • Install, configure, and commission SectionStar™ and TrimStar Pro™ units at customer sites, • Perform on-site diagnostics, troubleshooting, and repair of electro-mechanical and control-system components, • Use software tools to diagnose issues, identify root causes, and support machines deployed in the field, • Conduct preventive maintenance and routine system health checks, • Accurately document service activities, maintenance findings, and corrective actions, • Collaborate cross-functionally with engineering, manufacturing, and customer support teams to communicate field issues and recommend product improvements, • Support beta testing, validation activities, and field deployment of product updates, • Maintain a high level of professionalism and clear customer communication while representing Clarapath, • Ensure compliance with safety protocols, quality standards, and applicable regulatory requirements Qualifications: • Associate degree or technical certification in engineering technology, electronics, mechanical systems, or a related field (Bachelor’s degree preferred), • 2+ years of experience in field service, technical support, electro-mechanical equipment maintenance, or a related role, • Strong troubleshooting skills across mechanical assemblies, electrical systems, sensors, and control hardware, • Experience diagnosing basic electrical issues using multimeters, • Hands-on experience with wire crimping and cable assembly, • Ability to read and interpret schematics, wiring diagrams, and mechanical drawings, • Comfortable working with software tools and command-line interfaces with training and guidance from the software team, • Ability to work with small electro-mechanical components in tight spaces; steady hands required, • Competency in handling warehouse equipment such as hand trucks and electric stackers, • Excellent communication skills, strong customer-service orientation, and attention to documentation detail, • Ability to travel frequently to customer sites (up to ~50% -75%), • Ability to lift and maneuver equipment as required for installation and service tasks, • Familiarity with laboratory or medical devices, a plus Company Offers: • Competitive salary will be commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays), • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world, • A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

EDUCATION AND EXPERIENCEBachelor’s degree in engineering (mechanical, aerospace, or related field) required7+ years relevant work experience as a quality engineer or equivalent, aerospace industry preferredStrong knowledge of RCCA, including problem solving tools and demonstrated effectiveness at

EDUCATION AND EXPERIENCEBachelor’s degree in engineering (mechanical, aerospace, or related field) required3-6 years of relevant work experience as a quality engineer or equivalent, aerospace industry preferredStrong knowledge of RCCA, including problem solving tools and demonstrated effectiveness

SummaryType: Full-timeFunction: Information TechnologyExperience level: AssociateIndustry: Information Technology And Services. Understanding of market and technology trends. Software Development, Software Consultancy and Information Technology Enabled Services.