System engineer jobs in BoltonCreate job alerts

A fantastic opportunity has arisen for a Test Development Engineer to contribute to the design, integration and validation of test system hardware solutions, joining our highly skilled and dynamic Test Equipment Design TeamSalary: Circa 43,000 depending on experience Location: Stevenage (We may be

World Class Defence Organisation based in Bolton is currently looking to recruit a Manufacturing Engineer.The department are looking for candidates with skills in the following: Verification & validation, design modifications, commissioning, FMEAs, configuration control, sub-assembly manufacturing.Rate: £35.00 per hourLocation: BoltonContract: 37 Hours per weekOvertime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’Duration: 12 Months (initially and then ongoing and long-term thereafter)IR35 status: Inside IR35 (Umbrella)Manufacturing Engineer Job Description:• As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing.• Compilation and update of Manufacturing Instructions.• Design, Commissioning and proving of associated tooling.• Support the industrial validation process through the use of FMEA’s, FAI’s etc.• Resolution of technical problems that may arise during the manufacturing process.• Route card changes as a result or rework activities.• Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions.• Support to the Non Conformance Process using SAP.Skills / Experience:• Verification & validation• Design modifications• COMMISSIONING• FMEA’s• Configuration control• Sub-assembly manufacturing• Industrial Validation through the use of FMEA’s, translating design requirements, interpret Design Drawings with a view to producing Manufacturing Build Instructions. Management of Configuration control by the embodiment of Design Modifications, • Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators.• Have experience of Electronic Sub Assembly manufacture through to System level builds.• Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems.• Must be able to work within and contribute to a team environment.• Recognise and understand customer requirements, and respond to them.Qualifications Required:• Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard)AND• Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.)AND• Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achievedORDegree in a relevant Engineering subject.

We are seeking a highly capable Electronic Systems Engineer to lead and support the system-level design, equipment breakdown, and interconnection of complex electronic systems.Job Title: Electronic Systems EngineerSalary: Circa 52,500 - 57,000 depending on experienceDynamic (hybrid) working: 2 to 3

Fire Engineer (JPC-109) \n Location - Remote \n Salary - £65,000 - £80,000 \n \n Overview: \n Complete internal and external Fire Risk Assessments both visual and fully intrusive. \n \n Advise clients on fire safety compliance within existing and new build schemes and work with multi disciplinary team in developing complex designs. \n \n Experience: \n\n • Minimum 3 years PQE\n, • External Wall Risk Assessments\n, • Retrospective and design fire strategies\n, • Compartmentation Surveys\n, • Large and small refurbishment and re-cladding projects\n, • Fire Protection Work\n, • Member of IFE\n, • Level 5 certificate/diploma or above\n\n \n Skills, Knowledge and Understanding: \n\n • Liaise closely with Clients, Contractors, Developers, Clerk of Works and other key stakeholders.\n, • Undertake Risk Assessments in line with current legislation.\n, • Advise clients of pragmatic, cost-effective solutions to mitigate risk where possible.\n, • Ability to work in a fast-paced environment; decision making based on a clear fire engineering analysis.\n\n \n Clients: \n\n • Contractors and Developers.\n, • Principally Local Authorities, Housing Associations and other Clients.\n\n \n General: \n\n • Comply with, or improve upon, our Clients’ Key Performance Indicators.\n, • Working with a Quality Management System. Report on a regular basis on status of projects and update Fee Projections.\n, • Assist the Director in Charge with Business Development, cultivating new and existing Clients to promote our Building Surveying service offering.\n\n \n Fire Engineering: \n\n • Assist the client in RAG assessing their stock to understand their potential liabilities.\n, • Review information relating to fire safety that the client has accrued for their buildings to date and advise them of its suitability.\n, • Conduct Fire Risk Assessments both internally and externally in-line with current industry guidance and compile a detailed report.\n, • Provide CPD to clients, making them aware of their obligations as building owners.\n, • Peer review reports from other Fire Engineers where requested.\n, • Work with the project team to produce cost-effective, pragmatic remedial solutions where possible.\n, • Attend client/resident meetings when required to explain reports that have been issued and the implications of the findings.\n, • Produce Fire strategies, fire safety management plans, planning statement, fire statements, assist with BSR applications, review design drawings and technical data sheets.\n, • Work with the project team to compile the ER’s.\n, • Liaise closely with the Clerk of Works and the contractor and carry out compliance checks of the works as they progress.\n, • Attend site progress meetings when required.\n, • Assist with updating and creating new templates; support wider fire engineering team as required.\n\n \n Rewards and Benefits: \n\n • Competitive salary\n, • Discretionary bonus incentive\n, • Pension contributions\n, • Private medical insurance\n, • 28 days holiday (incl. Bank Holidays)\n, • 3-4 days during Xmas period\n, • 1 day off for birthday\n\n \n Salary: \n £65,000 to £80,000 per annum

Hybrid working – 2 – 3 days on site (further travel to Stevenage required if not based there)Inside IR35 - £50 per hour umbrella6 month contract initially – open to extensionOverview of Department :A leading defence client has a fantastic opportunity for an Interconnects Design Engineer to work within our growing Interconnects team designing bespoke electrical interconnects / cables suitable for the transmission of power, signal and data within and between subsystems in our products, developing and designing Test Equipment solutions for the next generation of weapons.Responsibilities:To do this you will need to interpret sub-system requirements and, from these, generate electrical schematics and cable design definitions on Microsoft Visio & HarnWare work packages. You will need to be able to carry out investigations into a full range of cable problems and issues; developing and preparing solutions, either individually or as a member of a project team. The role also includes support to manufacturing in order to resolve any manufacturing issues, as well as supporting functional and environmental product trials.This role provides a wide scope of tasks and a unique opportunity to broaden technically within a growing company and high capability design teams. Exposure to complex and technologically advanced projects and products provides a stimulating experience.Working with highly talented and motivated engineers, in a friendly and supportive environment, provides one of the best environments to achieve a real feeling of success.Skillset / Experience required:Individuals will need to have demonstrable experience in cable / harness / interconnects design, using relevant design packages such as Visio and HarnWare. The ideal candidate will have:A minimum 2 years' experience in the use of Visio and related products (Harnware).A proven ability to define, deploy, and refine processes and best practices within Visio and Harnware. – including; electrical topology, wiring schematics and 2D manufacturing drawing processes and standards.Thorough understanding of product data management and change management within Windchill or similar.The ability to design cable assemblies based upon electrical constraints such as current, screening, signal types, volt drop, EMC and environmental requirements.An appreciation of cable assembly production/process engineering.Due to the nature of our work, experience of military Defence Standards and a working knowledge of D38999 connectors in support of cable harness manufacture is highly desirable.Ideally Degree/HND/HNC qualified plus significant experience in Interconnects/Harness Design and Development.The ability to lead interconnects/harness design work packages and have experience of working within a multi-disciplinary team with the awareness and understanding of the challenges that this may bring.Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation.Strong communication skills, both written and verbal with the ability to influence and negotiate with partners across the business.Experience of supplier engagement and development across internal and external multi-disciplinary teams.TPBN1_UKTJ

Our client, a long-established and reputable business, is seeking a skilled Refrigeration & Air Conditioning Engineer to join their team. This is a fantastic opportunity to play a key role in servicing, maintaining, and installing refrigeration, air conditioning, and associated equipment.Reporting to the local Branch Manager, you will work as an integral member of an experienced engineering team, providing technical support and guidance to junior engineers and trainees.Key ResponsibilitiesPerform service work and repairs on a variety of refrigeration, air conditioning, and related equipment.Install and commission both new and used refrigeration and air conditioning systems.Conduct planned maintenance to ensure equipment runs efficiently and effectively.Provide detailed feedback to the Branch or Service Manager regarding equipment condition, enabling proactive follow-up by the sales team.Participate in the companys on-call system after a reasonable onboarding period, offering 24-hour support to customers.Mentor and support the development of junior engineers and trainees.Maintain high-quality standards in all work performed.Accurately complete administrative tasks, including job cards, maintenance reports, timesheets, and other documentation.Ensure all work is carried out safely, adhering to health and safety regulations and maintaining equipment in good condition.Share feedback to help improve the companys Health, Safety, and Environmental systems.Qualifications & ExperienceLevel 2 or Level 3 City & Guilds RACHP qualification.F-Gas Category 1 (2079) certification (preferred but not essential).Strong knowledge of workplace health and safety, particularly regarding refrigeration and HVAC industry risks.Hands-on engineering experience, with the flexibility to travel to customer sites.A customer-oriented mindset with excellent interpersonal skills, as you will often interact directly with clients.Willingness to work additional hours, if necessary, to meet customer needs.What Were Looking ForThe ideal candidate is proactive, adaptable, and committed to delivering high-quality work. Youll take pride in maintaining safe practices, mentoring junior team members, and ensuring excellent customer satisfaction.If youre an experienced engineer looking for a dynamic role with a supportive and professional team, wed love to hear from you!TPBN1_UKTJ

Operations Engineer Bolton, UK About Edina Established in 1985, Edina is a leading international power generation specialist, delivering low-carbon, cost-effective energy and battery storage solutions. Using diverse fuel sources like biogas, natural gas and landfill gas, Edina supports clients in improving energy efficiency, reducing emissions, and achieving net zero goals. With over 200 professionals and global operations, Edina combines innovative technology, in-house manufacturing, and strong customer values, including sustainability, flexibility, and integrity, to provide reliable, tailored power solutions and exceptional after-sales support across public and industrial sectors. At the core of our operations is a commitment to excellence and responsibility, where safety is our top priority, and our company values guide every decision we make: People Our staff are our core asset. Individually and collectively, they are critical to the success of our vision. Organisation We are engaged, loyal, and accountable in achieving our goals. Work Working safely is not just a policy, its our responsibility. Ethics We embrace honesty, integrity, and respect, doing the right thing every time. Reputation We strive for excellence in our processes, enabling us to achieve best-in-class industry standards. We are currently looking for an Operations Engineer to join our team on a full-time, permanent basis. The Benefits - Competitive salary - Attractive overtime rates - 25 days annual leave plus bank holidays and public holidays - Enhanced Holiday Entitlement based on length of service - Company pension scheme with an attractive employer contribution percentage - Company van - Private healthcare scheme - Life Insurance - Employee Assistance Programme - Cycle to Work Scheme - Career development opportunities - Continued investment in employee training to further enhance knowledge, expertise and creativity This is an exciting opportunity for a skilled mechanical or electrical engineer with strong knowledge of gas/diesel engines to join our leading international organisation. You will play a vital role in maintaining and optimising installations that help clients improve energy efficiency, reduce emissions and move towards Net Zero goals. What is more, you will benefit from attractive overtime rates and a strong all-round rewards package, alongside the chance to build a rewarding long-term future with a company that combines innovation with real-world impact. So, if you are looking for a position where your experience will make a visible difference every day, read on and apply today. The Role As an Operations Engineer, you will carry out scheduled and unscheduled maintenance work on installations across Bolton and the surrounding area. Ensuring that customer satisfaction is achieved, you will efficiently diagnose and implement all reactive maintenance work on our clients installations, as well as other users installations. You will also oversee and work to optimise the operational processes of users systems to increase productivity and reduce their use of excess time and materials. About You To be considered as an Operations Engineer, you will need: - To hold a minimum of an ONC, NVQ Level 2 or City & Guilds Level 2 qualification in mechanical and/or electrical engineering, motor vehicle studies or equivalent - To be a competent time-served technician, preferably with a minimum of three years industrial mechanical and/or electrical experience - To possess in-depth knowledge of gas/diesel engines - To demonstrate excellent communication skills - To have effective IT skills and competency in the use of Microsoft Office packages - To hold a full, valid driving licence Hours of Work: Monday - Friday, 8.00am - 4.30pm. This role will involve weekend work and possible out-of-hours work. You will be required to participate in an established 24-hour callout programme based on a rota system. Other companies may call this role Installation Engineer, Field Service Engineer, Engine Maintenance Technician, Electrical Engineer, Mechanical Engineer, Senior Field Service Technician, or Maintenance Technician. The closing date for applications is 4.00pm on Tuesday, 1st September 2026. Due to a fast-moving market, applications may be filled on short notice, and the deadline date may be brought to a close early. Please apply early to avoid disappointment. We are an employer committed to equal opportunities, and our company is sponsored. (This position may not meet the requirements for sponsorship). So, if you are ready to join us as an Operations Engineer, please apply via the button shown. This vacancy is being advertised by Webrecruit. The services advertised by Webrecruit are those of an Employment Agency. TPBN1_UKTJ

We are seeking a highly capable Electronic Systems Engineer to lead and support the system-level design, equipment breakdown, and interconnection of complex electronic systems.Job Title: Electronic Systems EngineerSalary: Circa 52,500 - 57,000 depending on experienceDynamic (hybrid) working: 2 to 3 days per week on-site due to workload classificationSecurity Clearance: British Citizen or a Dual UK national with British citizenship.Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team.What we can offer you:Company bonus: Up to 2,500 (based on company performance and will vary year to year)Pension: maximum total (employer and employee) contribution of up to 14%Overtime: opportunity for paid overtimeFlexi Leave: Up to 15 additional daysFlexible working: We welcome applicants who are looking for flexible working arrangementsEnhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatmentsFacilities: Fantastic site facilities including subsidised meals, free car parking and much more…Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. The opportunity:We’re looking for a systems-focused electronics engineer who thrives on turning complex functional requirements into fully integrated hardware solutions, from early concept through to production and deployment. In this role, you’ll take ownership of system-level electronic design, defining architectures, flowing down requirements, and breaking down equipment and subsystems into clearly defined functions, interfaces, and responsibilities.You’ll shape how everything connects, managing interconnects between subsystems and external equipment, and producing high-quality system schematics, wiring diagrams, and interface control documentation that form the backbone of robust, reliable designs.Collaboration is at the heart of this position. You’ll work closely with mechanical, firmware, software, and manufacturing teams to ensure seamless system integration, guiding designs through validation, acceptance testing, and into operational use. From hands-on system integration and root cause analysis to ensuring compliance with safety, EMC, and regulatory standards, you’ll play a key role in delivering dependable electronic equipment solutions.What we're looking for from you:Ideally a Bachelor’s degree (or higher) in Electronic Engineering, Electrical Engineering, or a related disciplineStrong experience in system-level electronic design and integrationProven ability to define equipment architectures, interconnects, and interfacesSolid understanding of analogue and digital electronicsAbility to read and produce system schematics, wiring diagrams, block diagrams, and technical documentationExcellent problem-solving, communication, and documentation skillsExperience with systems design tools (e.g. DOORS, Rhapsody, MATLAB Simulink)Desirable but not essential skillsExperience with power distribution and grounding strategiesKnowledge of communication protocols (CAN, Ethernet, HDLC, SPI, I²C, UART)Familiarity with EMC/EMI mitigation at system levelExperience in regulated industries (automotive, aerospace, rail, medical, defence)Experience with SPICE simulator softwareOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a givenMBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom.We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more…We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process.Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information.SummaryLocation: Stevenage; BoltonType: Full time

Join the Fusion and Modular Nuclear Business Unit! Reporting to the CAD Manager, the mechanical CAD engineer is responsible for the delivery of component models and definitions, system P&IDs, integrated layouts, and assemblies for the Small Modular Reactor (SMR). Provide CAD expertise, training, and

MBDA Miissle System is looking for a Principal Electrical Component Engineer to join their team in Bolton.The role involves managing electronic components, assessing market trends, and providing technical guidance across multiple departments.The position offers a salary of circa £48,000 based on ex

You will lead and support system-level electronic design from concept through production and deployment, and help define architectures for complex electronic equipment. Eclectic Recruitment Ltd in Bolton, Greater Manchester, is seeking an Electronic Systems Engineer for a full-time role paying £55,

We are seeking a highly analytical and collaborative.This role is ideal for someone with a strong background in.Data Analysis & Insight Generation.Analyze complex datasets across the electronics production lifecycle, including design, manufacturing, testing, and supply chain stages.Identify trends,

Car Benefit Solutions is seeking a Graduate Software Support Engineer to join the Software Services team. You will provide first-line system support for CBS systems and client-facing websites, triage tickets, and document behaviours while developing foundations towards Software Engineering, Database

We are looking for a Graduate Software Support Engineer who will be responsible for first-line system support for CBS's systems and client-facing websites, while developing a strong foundation in how the business operates. It is designed as a technical role for someone with clear interest in progres

Assystem GmbH in Bolton is seeking an HVAC Design Engineer for a permanent position.Your responsibilities will include overseeing HVAC design processes, reviewing technical documentation, and ensuring system integration.The ideal candidate will have a degree in Mechanical Engineering and 3-5 years o

Role: Systems Engineer - Various LevelsLocation: Belfast, 3 days per week hybridSalary: £50,000 - £70,000SC eligible, clearance required to start&l

Senior System Engineer (AI/ML) | Permanent position. The role requires strong hands-on engineering expertise combined with solid consulting capabilities across AI/ML Engineering platforms, Ubuntu Server, NVIDIA Technologies (Run: AI, GPU Operator), Kubernetes containerisation, and High-Performance C

Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Do you hold an HNC or higher in an engineering discipline? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing test engineering support to operators on the shopfloor Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information Identify remedial and corrective actions Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your skillset may include: Minimum HNC level of Engineering qualifications or equivalent A good understanding of digital and analogue electronic measurement and test principles, and associated equipment down to component level Awareness of electrical/electronic sub-system and system design, integration, and test principles. An understanding of RF and microwave technology at subsystem level An understanding of Environmental testing (including ESS) Operating manual and automated test equipment in an electronics manufacturing environment If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

World Class Defence Organisation based in Bolton is currently looking to recruit a Manufacturing Engineer. The department are looking for candidates with skills in the following: Verification & validation, design modifications, commissioning, FMEAs, configuration control, sub-assembly manufacturing. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non Conformance Process using SAP. Skills / Experience: Verification & validation Design modifications COMMISSIONING FMEA’s Configuration control Sub-assembly manufacturing Industrial Validation through the use of FMEA’s, translating design requirements, interpret Design Drawings with a view to producing Manufacturing Build Instructions. Management of Configuration control by the embodiment of Design Modifications, Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within and contribute to a team environment. Recognise and understand customer requirements, and respond to them. Qualifications Required: Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard)AND Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.)AND Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achievedOR Degree in a relevant Engineering subject

Electrical Maintenance Engineer – 4.5 days a week £41,000 + Bonus + Enhanced Company Benefits Hindley Green, Greater Manchester An excellent opportunity for an electrical engineer looking for a role within manufacturing offering Mon-Fri working hours with a half day on Friday. This is a great chance to work for an established engineering manufacturer in a factory-based role offering industry specific training and a comprehensive benefits package. You will be working for a reputable multinational that has a couple of sites in the UK. This is a hands-on role where you will support a site-based engineering team, tasked with carrying out electrical repairs and planned maintenance work across a range of industrial equipment. You will be supported with relevant training on specialist machinery and will be working for a company that has a leading name within its industry. This role would suit an electrical engineer looking for a hands-on role within manufacturing, offering great benefits and Mon-Fri working hours. Candidates from a manufacturing/forces/heavy engineering background are encouraged to apply. The Role: - Planned and reactive maintenance across manufacturing equipment and site infrastructure. - Supporting site engineering improvement projects. - Mon-Fri 2 shift system with a half day on Fridays. The Candidate: - Electrical engineering background - Ideally some experience within manufacturing/forces/heavy engineering - Looking for a Mon-Fri role. Electrical Maintenance Engineer, Maintenance Electrician, Electrical Engineer, Maintenance Engineer, manufacturing, mechanical, hydraulics, pneumatics, engineer, engineering, Hindley Green, Wigan, Atherton, Tyldesley, Leigh, Greater Manchester, Manchester, Lancashire, Bolton, St Helens. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK

Supplier Quality Engineer (Automotive) Bolton 12-Month Fixed Term Contract Days Role £42,000 + Bonus About the Opportunity An exciting opportunity has arisen for a Supplier Quality Engineer to join a global automotive technology manufacturer at its Bolton facility on a 12-month fixed-term contract. This is an excellent opportunity for an experienced quality professional to influence supplier performance, support new product launches and drive continuous improvement across a global supply chain. Key Responsibilities - Supplier Quality Engineer Support the approval and qualification of new suppliers through management system and process audits. Manage supplier activities throughout New Product Introduction (NPI), ensuring project deadlines are achieved. Lead Supplier APQP and PPAP approval activities. Conduct ongoing supplier audits and assessments to maintain supplier approval status. Develop suppliers through training, coaching and deployment of quality standards. Carry out supplier visits for audits, development projects and corrective action reviews. Act as the primary quality interface between suppliers and the business. Monitor and report supplier quality KPIs, driving improvements in supplier performance. Lead supplier corrective and preventive action activities. Manage quality-related aspects of supplier change control processes. Investigate and manage supplier non-conformances and rejection issues. Experience/Qualifications - Supplier Quality Engineer HNC/HND qualified in Mechanical, Electrical or Manufacturing Engineering. Qualified IATF 16949 and/or VDA 6.3 Auditor. Minimum 3 years' experience in a Supplier Quality or Quality Engineering role. Automotive experience preferred, although backgrounds in electronics, mechanical manufacturing or high-volume assembly environments will also be considered. Strong understanding of APQP, PPAP, FMEA, Control Plans, SPC, R&R and supplier development methodologies. Experience conducting supplier audits and managing supplier improvement projects. Strong communication and stakeholder management skills. Comfortable travelling to supplier sites when required. Proven ability to manage multiple projects and deadlines simultaneously. Benefits - Supplier Quality Engineer Discretionary Annual Bonus (7.5%) Up to 5.5% Employer Pension Contribution Electric Vehicle Scheme via Salary Sacrifice Free EV Charging On Site Private Medical Insurance Death in Service Cover (4x Annual Salary) For more information on this role, please contact Ben Dawson on (phone number removed), or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include : Supplier Quality Engineer, Supplier Development Engineer, Supplier Quality Assurance Engineer, SQA Engineer, Quality Engineer, Senior Quality Engineer, APQP Engineer, Manufacturing Quality Engineer, Supplier Development Specialist, Vendor Quality Engineer, Supplier Performance Engineer, Supplier Audit Engineer, Quality Systems Engineer, NPI Quality Engineer, Automotive Quality Engineer. Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process

Job Title: Water Hygiene Engineer Location: Bolton, Greater Manchester Salary/Benefits: £26k - £35k + Training & Benefits A leading name within the Water Hygiene / Treatment industry, who have recently won new contracts in the North West of England. They are recruiting for a self-sufficient Water Hygiene Engineer to service commercial and local authority premises across the region. Applicants must be able to demonstrate strong technical experience and full understanding of industry safety guidelines. Our client is renowned for supporting fantastic further training and longevity within the industry. In addition, they are offering competitive salaries and benefits (including: overtime, company vehicle, pension scheme and annual leave). We can consider candidates from the following locations: Bolton, Bury, Rochdale, Oldham, Manchester, Stockport, Altrincham, Macclesfield, Warrington, Runcorn, Ellesmere Port, Chester, Liverpool, St Helens, Skelmersdale, Southport, Ormskirk, Formby, Chorley, Wigan, Preston, Blackburn, Burnley, Birkenhead, Crosby, Leigh. Experience / Qualifications: • Hands-on experience working as a Water Hygiene Engineer, • Good knowledge of ACOP L8 and HSG 274 guidelines, • It would be advantageous to hold industry related qualifications, • Hardworking attitude, • Good literacy, numeracy and IT skills, • Comfortable working to agreed deadlines The Role: • Conducting a wide range of L8 compliance duties across varied client sites, • Showerhead and outlet descales, • Basic flushing on outlets, • Calorifier inspections, • Inspections, cleans and disinfections on cold water storage tanks, • Chlorinations, • Routine water sampling and temperature monitoring, • Completing regular service reports Alternative job titles: Water Treatment Engineer, Water Management Engineer, Environmental Service Technician, Legionella Operative, Water Hygiene Technician. Future Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills. Future Select Copyright 2026

Manufacturing Engineer - Assembly & Integration Location: Bolton (full time onsite) Duration: 12 months Rate: £32-£35 p/h Umbrella IR35: Inside Clearance: SC (can start on BPSS) Overview Our client, a prominent entity in the Defence & Security sector, is searching for a dedicated Manufacturing Engineer focused on Assembly & Integration to join their team in Bolton on a full-time, contract basis. Responsibilities: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non Conformance Process using SAP. Skillset/experience required: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and level 3 (ONC) OR Formal further education certificate to HNC or equivalent certificate with experience within an engineering discipline 5 years' experience within an engineering discipline. Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within, and contribute to a team environment. Recognise and understand customer requirements, and respond to them. Understand and work to Company Processes and Procedures. Have the ability to communicate both within the working group and at various levels of the organisation

At Warburtons, family is at the heart of our business. Five generations' worth of expertise that goes into making our bakery products allows us to continue a tradition of baking inherited over the past 150 years. Warburtons is the largest bakery brand in the UK, but that doesn't allow us to rest on our laurels. We are pioneers of the industry and ambitious market leaders, always seeking to challenge ourselves and convention. It is part of our philosophy to provide honest good sense on issues of health and well-being, helping the whole family to enjoy our products as part of a healthy, balanced diet, through a range of products to suit all meal occasions, lifestyles and tastes. Role: Multi-Skilled Engineer Location: Variety Bakery (Bolton) Hours: 4 on 4 off (days and nights) / 12 hour Shift Pattern Salary: £57,002 + Potential Overtime + Annual Profit-Related Bonus At Warburtons, engineering isn’t just about keeping the lines running – it’s about driving the future of baking. With a strong Northern heritage and a forward thinking mindset, we blend traditional values with cutting-edge technology to stay ahead of the game. That’s why we’re embracing next-generation automation and technological engineering gains, with a bold vision to become world-class. Our newly launched Engineering Academy, built in partnership with the IMechE, is one of our proudest achievements. It’s designed to develop and elevate our engineers, equipping you with the skills, training, and recognition to thrive, whether you want to deepen your technical expertise or progress your career. The Recipe You’ll join a highly skilled, collaborative team of Engineers focused on: Planned Preventative Maintenance (PPM) Root Cause Analysis (RCA) Condition-Based Monitoring (CBM) Continuous Improvement and Energy Efficiency Projects From diagnosing faults before they cause downtime to delivering long-term fixes and system upgrades, this is a hands-on, proactive role that plays a critical part in the success of our 24/7, high-speed, automated food manufacturing site. The Role You’ll join a highly skilled, collaborative team of Engineers focused on: Planned Preventative Maintenance (PPM) Root Cause Analysis (RCA) Condition-Based Monitoring (CBM) Continuous Improvement and Energy Efficiency Projects From diagnosing faults before they cause downtime to delivering long-term fixes and system upgrades, this is a hands-on, proactive role that plays a critical part in the success of our 24/7, high-speed, automated food manufacturing site. Essential Ingredients We want talented engineers who are hungry to learn, grow and make an impact. Here’s what helps you rise to the top of the list: Technically strong Multi Skilled Engineers, predominately electrically biased with mechanical skills (ideally in FMCG or high-volume manufacturing) An apprenticeship, BTEC, HNC or similar engineering qualification Experience with condition-based monitoring (thermal imaging, ultrasound, vibration analysis) is a bonus Top-tier problem-solving and root cause analysis skills A safety-first mindset, with good knowledge of H&S systems and legislation A desire to develop, contribute, and take ownership in a team striving for operational excellence Extra Dough At last and by no means least you will want to know what your breads worth. A slice of the annual profits (discretionary profit share) Family time is important to us so as well as your holiday entitlement, we'll give you the opportunity to purchase up to an extra weeks annual leave Award winning pension scheme with company contributions Life assurance Products you will love along with deals and discounts for you and the family through our Extra Dough website Continued investment in your personal development Fully stocked kitchens filled with our delicious products for you to enjoy with your daily brew! Support for your health and wellbeing, including access to free physiotherapy, 24/7 access to a confidential helpline for practical advice and a comprehensive occupational health service We respect and value difference. We look to create an inclusive workplace that promotes and values diversity. Companies that are diverse in age, gender identity, race, religion, sexual orientation, physical or mental ability, ethnicity, or any other aspect which makes them unique, are proven to be better companies. More importantly, creating an environment where everyone, from any background, can do their best work, is the right thing to do

Operations Engineer Bolton, UK About Edina Established in 1985, Edina is a leading international power generation specialist, delivering low-carbon, cost-effective energy and battery storage solutions. Using diverse fuel sources like biogas, natural gas and landfill gas, Edina supports clients in improving energy efficiency, reducing emissions, and achieving net zero goals. With over 200 professionals and global operations, Edina combines innovative technology, in-house manufacturing, and strong customer values, including sustainability, flexibility, and integrity, to provide reliable, tailored power solutions and exceptional after-sales support across public and industrial sectors. At the core of our operations is a commitment to excellence and responsibility, where safety is our top priority, and our company values guide every decision we make: People – Our staff are our core asset. Individually and collectively, they are critical to the success of our vision. Organisation – We are engaged, loyal, and accountable in achieving our goals. Work – Working safely is not just a policy, it’s our responsibility. Ethics – We embrace honesty, integrity, and respect, doing the right thing every time. Reputation – We strive for excellence in our processes, enabling us to achieve best-in-class industry standards. We are currently looking for an Operations Engineer to join our team on a full-time, permanent basis. The Benefits • Competitive salary - Attractive overtime rates - 25 days’ annual leave plus bank holidays and public holidays - Enhanced Holiday Entitlement based on length of service - Company pension scheme with an attractive employer contribution percentage - Company van - Private healthcare scheme - Life Insurance - Employee Assistance Programme - Cycle to Work Scheme - Career development opportunities - Continued investment in employee training to further enhance knowledge, expertise and creativity This is an exciting opportunity for a skilled mechanical or electrical engineer with strong knowledge of gas/diesel engines to join our leading international organisation. You will play a vital role in maintaining and optimising installations that help clients improve energy efficiency, reduce emissions and move towards Net Zero goals. What is more, you will benefit from attractive overtime rates and a strong all-round rewards package, alongside the chance to build a rewarding long-term future with a company that combines innovation with real-world impact. So, if you are looking for a position where your experience will make a visible difference every day, read on and apply today. The Role As an Operations Engineer, you will carry out scheduled and unscheduled maintenance work on installations across Bolton and the surrounding area. Ensuring that customer satisfaction is achieved, you will efficiently diagnose and implement all reactive maintenance work on our client’s installations, as well as other users’ installations. You will also oversee and work to optimise the operational processes of users’ systems to increase productivity and reduce their use of excess time and materials. About You To be considered as an Operations Engineer, you will need: • To hold a minimum of an ONC, NVQ Level 2 or City & Guilds Level 2 qualification in mechanical and/or electrical engineering, motor vehicle studies or equivalent - To be a competent time-served technician, preferably with a minimum of three years’ industrial mechanical and/or electrical experience - To possess in-depth knowledge of gas/diesel engines - To demonstrate excellent communication skills - To have effective IT skills and competency in the use of Microsoft Office packages - To hold a full, valid driving licence Hours of Work: Monday - Friday, 8.00am - 4.30pm. This role will involve weekend work and possible out-of-hours work. You will be required to participate in an established 24-hour callout programme based on a rota system. Other companies may call this role Installation Engineer, Field Service Engineer, Engine Maintenance Technician, Electrical Engineer, Mechanical Engineer, Senior Field Service Technician, or Maintenance Technician. The closing date for applications is 4.00pm on Tuesday, 1st September 2026. Due to a fast-moving market, applications may be filled on short notice, and the deadline date may be brought to a close early. Please apply early to avoid disappointment. We are an employer committed to equal opportunities, and our company is sponsored. (This position may not meet the requirements for sponsorship). So, if you are ready to join us as an Operations Engineer, please apply via the button shown. This vacancy is being advertised by Webrecruit. The services advertised by Webrecruit are those of an Employment Agency

At Warburtons, family is at the heart of our business. Five generations' worth of expertise that goes into making our bakery products allows us to continue a tradition of baking inherited over the past 150 years. Warburtons is the largest bakery brand in the UK, but that doesn't allow us to rest on our laurels. We are pioneers of the industry and ambitious market leaders, always seeking to challenge ourselves and convention. It is part of our philosophy to provide honest good sense on issues of health and well-being, helping the whole family to enjoy our products as part of a healthy, balanced diet, through a range of products to suit all meal occasions, lifestyles and tastes. Role: Multi-Skilled Engineer (Day Based) Location: Bolton Bakery Shift Pattern: Days only Hours: 4 on 4 off Salary: £50,472 + Overtime + Annual Profit-Related Bonus Why Join Us? At Warburtons, engineering isn’t just about keeping the lines running – it’s about driving the future of baking. With a strong Northern heritage and a forward-thinking mindset, we blend traditional values with cutting-edge technology to stay ahead of the game. That’s why we’re embracing next-generation automation and technological engineering gains, with a bold vision to become world-class. Our newly launched Engineering Academy, built in partnership with the IMechE, is one of our proudest achievements. It’s designed to develop and elevate our engineers, equipping you with the skills, training, and recognition to thrive, whether you want to deepen your technical expertise or progress your career. What You'll Be Getting Stuck Into You’ll join a highly skilled, collaborative team of Engineers focused on: Planned Preventative Maintenance (PPM) Root Cause Analysis (RCA) Condition-Based Monitoring (CBM) Continuous Improvement and Energy Efficiency Projects From diagnosing faults before they cause downtime to delivering long-term fixes and system upgrades, this is a hands-on, proactive role that plays a critical part in the success of our 24/7, high-speed, automated food manufacturing site. What We're Looking For? We want talented engineers who are hungry to learn, grow and make an impact. Here’s what helps you rise to the top of the list: Technically strong Multi Skilled Engineers, predominately electrically biased with mechanical skills (ideally in FMCG or high-volume manufacturing) An apprenticeship, BTEC, HNC or similar engineering qualification Experience with condition-based monitoring (thermal imaging, ultrasound, vibration analysis) is a bonus Top-tier problem-solving and root cause analysis skills A safety-first mindset, with good knowledge of H&S systems and legislation A desire to develop, contribute, and take ownership in a team striving for operational excellence Extra Dough A slice of the annual profits with our discretionary bonus scheme Award-winning pension with generous company contributions Holiday trading scheme – buy up to an extra week off per year Life assurance, plus health & wellbeing support including physiotherapy and a 24/7 helpline Continued personal and professional development through the Warburtons Engineering Academy Fully stocked kitchens (yes – crumpets, teacakes, and more) Discounts for you and your family through our Extra Dough platform Sounds like the right mix? Then it’s time to bring your skills to the table. Apply today and help shape the future of engineering at Warburtons – where tradition meets innovation, and every day is a fresh opportunity to rise. We respect and value difference. We look to create an inclusive workplace that promotes and values diversity. Companies that are diverse in age, gender identity, race, religion, sexual orientation, physical or mental ability, ethnicity, or any other aspect which makes them unique, are proven to be better companies. More importantly, creating an environment where everyone, from any background, can do their best work, is the right thing to do

Our client has an opportunity for a Production Test Engineer to join their team on a contract basis for 12 months. As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Role: Production Test Engineer Location: Bolton, fully onsite Hours: 37 per week Hourly Rate: £34-£37 per hour via Umbrella, inside IR35 Clearance: BPSS required before starting, SC to follow What you'll be doing: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment. Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level. Generating test specifications, operator instructions and technical reports - based on higher-level requirements and information. Promptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures. Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations. Requirements: Essential: Minimum HNC level of Engineering qualifications or equivalent. Good understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level. Awareness of electrical/electronic sub-system and system design, integration and test principles. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports. Ability to plan and organise one's work according to assigned priorities. Advantageous: Knowledge of RF and Microwave technology at the subsystem level. Experience in operating manual and automated test equipment in an Electronics Manufacturing environment. If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

HVAC Engineer - Bolton Company: CBRE Global Workplace Solutions Company Profile CBRE is the global leader in real estate services, leveraging the industry's most powerful knowledge base to meet the commercial real estate needs of clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate services firm. We employ more than 100,000 people and operate across 48 countries. Role Overview We are recruiting an HVAC Multi Skilled Engineer to join our team based in Bolton. The successful candidate will perform both electrical and mechanical maintenance across plant, equipment and building services. Key Responsibilities Identify and manage risks associated with onsite equipment, including critical spares and plant performance improvements. Manage environmental conditions via the BMS system and ensure plant and equipment operate efficiently. Use new technologies and equipment to maintain a safe, comfortable working environment, liaising with the client on reactive and planned tasks. Carry out fault-finding on a wide range of HVAC plant and equipment, with a strong focus on VRV/VRF systems. Work safely with refrigerants, ensuring compliance with F‑Gas handling requirements. Support team members on Health & Safety matters. Act as Energy Champion and assist as Safety Champion when required. Provide electrical and mechanical expertise to the maintenance team. Prepare, follow and review Risk Assessments and Method Statements. Complete all required documentation in line with legislative and company standards. Use mobile devices to manage, record and complete tasks via the CAFM system. Plan daily work using email and calendar tools to ensure efficient task completion. Liaise with the onsite Supervisor and Account Manager to resolve building services issues. Deputise for the Site Supervisor during periods of absence. Work overtime when required, including nights and weekends if necessary. Supervise and manage subcontractors as needed. Participate in an on‑call rota for out‑of‑hours emergency response. Undertake additional ad‑hoc duties as required. Experience & Qualifications Required Recognised or time‑served apprenticeship. Strong, proven experience in HVAC maintenance. Mechanical qualifications to a City & Guilds standard. Good multi‑skilled capability. Strong fault‑finding skills. Ability to supervise contractors. Competence in producing Risk Assessments and Method Statements. Ability to prepare and understand permits and safe systems of work. F‑Gas certification and experience working with refrigerants. Desirable Qualifications Working at Height qualification. IPAF / PASMA certification. AP qualifications. Experience with BMS systems. Knowledge of HVAC controls

You'll work across the full engineering lifecycle, from integration and functional testing through to environmental and end-to-end system testing. Familiarity with spacecraft systems or high-reliability engineering environments is advantageous. We're looking for an AIT (Assembly, Integration & Test)

An exciting opportunity has arisen for a Systems Engineer, focussed on Integration & Test, to join a team developing advanced flight simulation systems used by pilot training operations around the world. Qualifications & Experience Bachelor’s degree in Aerospace, Electrical, or Systems Engine

Role: BEMS (Building Energy Management Systems) Design Engineer Salary: £45,000 - £80,000 + benefits, dependent on experience Location: Surrey (Hybrid) Overview An established and highly respected multidisciplinary engineering consultancy is looking to appoint a BEMS Design Engineer

Lead Fuel System Test Engineer. We are looking to recruit an experienced Fluid Mechanical Test Engineer for our Filton based Aerospace client. Ensure instrumentation and video recording systems are correctly set-up and configured for each test.

Building Energy Management Systems (BEMS) Engineer Intermediate - Principal Engineer | Manchester | £40,000+ DOE Manchester | Hybrid | Multi Disciplinary Consultancy An established multidisciplinary engineering consultancy is expanding its specialist Building Technologies / Controls team in

We are recruiting a System Test Engineer to join an established technology manufacturer based in Market Deeping. This is an excellent opportunity to join a specialist engineering business and take responsibility for testing complex communication systems used in safety-critical applications. Working

The Controls Systems Engineer shall specify, design and validate complex sub-systems, including high-level requirements for the software and / or hardware system components, this will include creation of mathematical models and simulations of control and actuation systems. An exciting opportunity ha

The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. This opportunity is for a Senior Test Engineer to join the Manufacturi

A leading technology firm in England is seeking a Manual Test Engineer responsible for planning and executing tests across enterprise LAN networks and file systems. The ideal candidate should have 3–7 years of experience in manual testing, strong exposure to network and file system testing, and th

Experience with cable system ECI engineering, subsea control and electrical solutions, cable manufacturing and testing, third‑party inspection and verification. Strong experience in cable system design engineering for HV/EHV transmission and distribution projects. Minimum HNC qualified in Electric

Other suitable skills and experience include Electronics Engineer, Systems Engineer, Hardware Engineer, Product Development Engineer, Medical Device Engineer, Embedded Systems Engineer, Compliance Engineer, Electrical Engineer, R&D Engineer, Mechatronics Engineer. Genedrive is seeking a knowledgeabl

The Portfolio Systems team supports this vision by developing the engineering coherence through Commonality, Modularity and Reuse across the UK Portfolio of Complex Weapons - current and future - by managing and delivering the Portfolio Engineering Design Record (EDR). This is an exciting opportunit

This is an outstanding opportunity for a Principal/Senior Controls Engineer to join a specialist engineering business with decades of expertise delivering advanced control systems. Working on technically challenging projects from tender through to commissioning, you'll take a leading role in the des

Develop and maintain system-level hardware defect detection tests for individual servers and rack-based systems. BS or MS in Electronics and Electrical, Computer, or Systems Engineering. Fractile is building silicon, systems and software which will redefine the frontier of AI: running the world’s

Solus Accident Repair Centres is seeking a talented Performance and Monitoring Engineer to strengthen the stability, reliability and performance of our systems across a large technology estate.

If you are an experienced Combat System Engineer and are ready to take the next step in your career by working with advanced technology in the Defence & Security sector, we would love to hear from you. Our client, a leader in the Defence & Security sector, is seeking a skilled Combat System Engineer

The ideal candidate should have a BS or MS in Electronics and Electrical Engineering, along with 3–7 years of experience in testing systems and servers. A cutting-edge technology company based in the UK seeks a Test Engineer to develop and maintain system-level hardware defect detection tests.