Trabajos system engineer en BoltonCrear alertas

World Class Defence Organisation based in Bolton is currently looking to recruit a Manufacturing Engineer.The department are looking for candidates with skills in the following: Verification & validation, design modifications, commissioning, FMEAs, configuration control, sub-assembly manufacturing.Rate: £35.00 per hourLocation: BoltonContract: 37 Hours per weekOvertime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’Duration: 12 Months (initially and then ongoing and long-term thereafter)IR35 status: Inside IR35 (Umbrella)Manufacturing Engineer Job Description:• As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing.• Compilation and update of Manufacturing Instructions.• Design, Commissioning and proving of associated tooling.• Support the industrial validation process through the use of FMEA’s, FAI’s etc.• Resolution of technical problems that may arise during the manufacturing process.• Route card changes as a result or rework activities.• Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions.• Support to the Non Conformance Process using SAP.Skills / Experience:• Verification & validation• Design modifications• COMMISSIONING• FMEA’s• Configuration control• Sub-assembly manufacturing• Industrial Validation through the use of FMEA’s, translating design requirements, interpret Design Drawings with a view to producing Manufacturing Build Instructions. Management of Configuration control by the embodiment of Design Modifications, • Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators.• Have experience of Electronic Sub Assembly manufacture through to System level builds.• Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems.• Must be able to work within and contribute to a team environment.• Recognise and understand customer requirements, and respond to them.Qualifications Required:• Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard)AND• Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.)AND• Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achievedORDegree in a relevant Engineering subject.

Fire Engineer (JPC-109) \n Location - Remote \n Salary - £65,000 - £80,000 \n \n Overview: \n Complete internal and external Fire Risk Assessments both visual and fully intrusive. \n \n Advise clients on fire safety compliance within existing and new build schemes and work with multi disciplinary team in developing complex designs. \n \n Experience: \n\n • Minimum 3 years PQE\n, • External Wall Risk Assessments\n, • Retrospective and design fire strategies\n, • Compartmentation Surveys\n, • Large and small refurbishment and re-cladding projects\n, • Fire Protection Work\n, • Member of IFE\n, • Level 5 certificate/diploma or above\n\n \n Skills, Knowledge and Understanding: \n\n • Liaise closely with Clients, Contractors, Developers, Clerk of Works and other key stakeholders.\n, • Undertake Risk Assessments in line with current legislation.\n, • Advise clients of pragmatic, cost-effective solutions to mitigate risk where possible.\n, • Ability to work in a fast-paced environment; decision making based on a clear fire engineering analysis.\n\n \n Clients: \n\n • Contractors and Developers.\n, • Principally Local Authorities, Housing Associations and other Clients.\n\n \n General: \n\n • Comply with, or improve upon, our Clients’ Key Performance Indicators.\n, • Working with a Quality Management System. Report on a regular basis on status of projects and update Fee Projections.\n, • Assist the Director in Charge with Business Development, cultivating new and existing Clients to promote our Building Surveying service offering.\n\n \n Fire Engineering: \n\n • Assist the client in RAG assessing their stock to understand their potential liabilities.\n, • Review information relating to fire safety that the client has accrued for their buildings to date and advise them of its suitability.\n, • Conduct Fire Risk Assessments both internally and externally in-line with current industry guidance and compile a detailed report.\n, • Provide CPD to clients, making them aware of their obligations as building owners.\n, • Peer review reports from other Fire Engineers where requested.\n, • Work with the project team to produce cost-effective, pragmatic remedial solutions where possible.\n, • Attend client/resident meetings when required to explain reports that have been issued and the implications of the findings.\n, • Produce Fire strategies, fire safety management plans, planning statement, fire statements, assist with BSR applications, review design drawings and technical data sheets.\n, • Work with the project team to compile the ER’s.\n, • Liaise closely with the Clerk of Works and the contractor and carry out compliance checks of the works as they progress.\n, • Attend site progress meetings when required.\n, • Assist with updating and creating new templates; support wider fire engineering team as required.\n\n \n Rewards and Benefits: \n\n • Competitive salary\n, • Discretionary bonus incentive\n, • Pension contributions\n, • Private medical insurance\n, • 28 days holiday (incl. Bank Holidays)\n, • 3-4 days during Xmas period\n, • 1 day off for birthday\n\n \n Salary: \n £65,000 to £80,000 per annum

Hybrid working – 2 – 3 days on site (further travel to Stevenage required if not based there)Inside IR35 - £50 per hour umbrella6 month contract initially – open to extensionOverview of Department :A leading defence client has a fantastic opportunity for an Interconnects Design Engineer to work within our growing Interconnects team designing bespoke electrical interconnects / cables suitable for the transmission of power, signal and data within and between subsystems in our products, developing and designing Test Equipment solutions for the next generation of weapons.Responsibilities:To do this you will need to interpret sub-system requirements and, from these, generate electrical schematics and cable design definitions on Microsoft Visio & HarnWare work packages. You will need to be able to carry out investigations into a full range of cable problems and issues; developing and preparing solutions, either individually or as a member of a project team. The role also includes support to manufacturing in order to resolve any manufacturing issues, as well as supporting functional and environmental product trials.This role provides a wide scope of tasks and a unique opportunity to broaden technically within a growing company and high capability design teams. Exposure to complex and technologically advanced projects and products provides a stimulating experience.Working with highly talented and motivated engineers, in a friendly and supportive environment, provides one of the best environments to achieve a real feeling of success.Skillset / Experience required:Individuals will need to have demonstrable experience in cable / harness / interconnects design, using relevant design packages such as Visio and HarnWare. The ideal candidate will have:A minimum 2 years' experience in the use of Visio and related products (Harnware).A proven ability to define, deploy, and refine processes and best practices within Visio and Harnware. – including; electrical topology, wiring schematics and 2D manufacturing drawing processes and standards.Thorough understanding of product data management and change management within Windchill or similar.The ability to design cable assemblies based upon electrical constraints such as current, screening, signal types, volt drop, EMC and environmental requirements.An appreciation of cable assembly production/process engineering.Due to the nature of our work, experience of military Defence Standards and a working knowledge of D38999 connectors in support of cable harness manufacture is highly desirable.Ideally Degree/HND/HNC qualified plus significant experience in Interconnects/Harness Design and Development.The ability to lead interconnects/harness design work packages and have experience of working within a multi-disciplinary team with the awareness and understanding of the challenges that this may bring.Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation.Strong communication skills, both written and verbal with the ability to influence and negotiate with partners across the business.Experience of supplier engagement and development across internal and external multi-disciplinary teams.TPBN1_UKTJ

Our client, a long-established and reputable business, is seeking a skilled Refrigeration & Air Conditioning Engineer to join their team. This is a fantastic opportunity to play a key role in servicing, maintaining, and installing refrigeration, air conditioning, and associated equipment.Reporting to the local Branch Manager, you will work as an integral member of an experienced engineering team, providing technical support and guidance to junior engineers and trainees.Key ResponsibilitiesPerform service work and repairs on a variety of refrigeration, air conditioning, and related equipment.Install and commission both new and used refrigeration and air conditioning systems.Conduct planned maintenance to ensure equipment runs efficiently and effectively.Provide detailed feedback to the Branch or Service Manager regarding equipment condition, enabling proactive follow-up by the sales team.Participate in the companys on-call system after a reasonable onboarding period, offering 24-hour support to customers.Mentor and support the development of junior engineers and trainees.Maintain high-quality standards in all work performed.Accurately complete administrative tasks, including job cards, maintenance reports, timesheets, and other documentation.Ensure all work is carried out safely, adhering to health and safety regulations and maintaining equipment in good condition.Share feedback to help improve the companys Health, Safety, and Environmental systems.Qualifications & ExperienceLevel 2 or Level 3 City & Guilds RACHP qualification.F-Gas Category 1 (2079) certification (preferred but not essential).Strong knowledge of workplace health and safety, particularly regarding refrigeration and HVAC industry risks.Hands-on engineering experience, with the flexibility to travel to customer sites.A customer-oriented mindset with excellent interpersonal skills, as you will often interact directly with clients.Willingness to work additional hours, if necessary, to meet customer needs.What Were Looking ForThe ideal candidate is proactive, adaptable, and committed to delivering high-quality work. Youll take pride in maintaining safe practices, mentoring junior team members, and ensuring excellent customer satisfaction.If youre an experienced engineer looking for a dynamic role with a supportive and professional team, wed love to hear from you!TPBN1_UKTJ

We are seeking a highly capable Electronic Systems Engineer to lead and support the system-level design, equipment breakdown, and interconnection of complex electronic systems.Job Title: Electronic Systems EngineerSalary: Circa 52,500 - 57,000 depending on experienceDynamic (hybrid) working: 2 to 3

A fantastic opportunity has arisen for a Test Development Engineer to contribute to the design, integration and validation of test system hardware solutions, joining our highly skilled and dynamic Test Equipment Design TeamSalary: Circa 43,000 depending on experience Location: Stevenage (We may be

Operations Engineer Bolton, UK About Edina Established in 1985, Edina is a leading international power generation specialist, delivering low-carbon, cost-effective energy and battery storage solutions. Using diverse fuel sources like biogas, natural gas and landfill gas, Edina supports clients in improving energy efficiency, reducing emissions, and achieving net zero goals. With over 200 professionals and global operations, Edina combines innovative technology, in-house manufacturing, and strong customer values, including sustainability, flexibility, and integrity, to provide reliable, tailored power solutions and exceptional after-sales support across public and industrial sectors. At the core of our operations is a commitment to excellence and responsibility, where safety is our top priority, and our company values guide every decision we make: People Our staff are our core asset. Individually and collectively, they are critical to the success of our vision. Organisation We are engaged, loyal, and accountable in achieving our goals. Work Working safely is not just a policy, its our responsibility. Ethics We embrace honesty, integrity, and respect, doing the right thing every time. Reputation We strive for excellence in our processes, enabling us to achieve best-in-class industry standards. We are currently looking for an Operations Engineer to join our team on a full-time, permanent basis. The Benefits - Competitive salary - Attractive overtime rates - 25 days annual leave plus bank holidays and public holidays - Enhanced Holiday Entitlement based on length of service - Company pension scheme with an attractive employer contribution percentage - Company van - Private healthcare scheme - Life Insurance - Employee Assistance Programme - Cycle to Work Scheme - Career development opportunities - Continued investment in employee training to further enhance knowledge, expertise and creativity This is an exciting opportunity for a skilled mechanical or electrical engineer with strong knowledge of gas/diesel engines to join our leading international organisation. You will play a vital role in maintaining and optimising installations that help clients improve energy efficiency, reduce emissions and move towards Net Zero goals. What is more, you will benefit from attractive overtime rates and a strong all-round rewards package, alongside the chance to build a rewarding long-term future with a company that combines innovation with real-world impact. So, if you are looking for a position where your experience will make a visible difference every day, read on and apply today. The Role As an Operations Engineer, you will carry out scheduled and unscheduled maintenance work on installations across Bolton and the surrounding area. Ensuring that customer satisfaction is achieved, you will efficiently diagnose and implement all reactive maintenance work on our clients installations, as well as other users installations. You will also oversee and work to optimise the operational processes of users systems to increase productivity and reduce their use of excess time and materials. About You To be considered as an Operations Engineer, you will need: - To hold a minimum of an ONC, NVQ Level 2 or City & Guilds Level 2 qualification in mechanical and/or electrical engineering, motor vehicle studies or equivalent - To be a competent time-served technician, preferably with a minimum of three years industrial mechanical and/or electrical experience - To possess in-depth knowledge of gas/diesel engines - To demonstrate excellent communication skills - To have effective IT skills and competency in the use of Microsoft Office packages - To hold a full, valid driving licence Hours of Work: Monday - Friday, 8.00am - 4.30pm. This role will involve weekend work and possible out-of-hours work. You will be required to participate in an established 24-hour callout programme based on a rota system. Other companies may call this role Installation Engineer, Field Service Engineer, Engine Maintenance Technician, Electrical Engineer, Mechanical Engineer, Senior Field Service Technician, or Maintenance Technician. The closing date for applications is 4.00pm on Tuesday, 1st September 2026. Due to a fast-moving market, applications may be filled on short notice, and the deadline date may be brought to a close early. Please apply early to avoid disappointment. We are an employer committed to equal opportunities, and our company is sponsored. (This position may not meet the requirements for sponsorship). So, if you are ready to join us as an Operations Engineer, please apply via the button shown. This vacancy is being advertised by Webrecruit. The services advertised by Webrecruit are those of an Employment Agency. TPBN1_UKTJ

An exciting role has become available in our Test Architect team as a Technical expert involved in all aspects of the Missile Test process. If you have experience Electronic circuit design, testing and failure analysis techniques along with Test equipment design then this could be just the role for you!Salary: Circa 72,000 depending on experienceDynamic (hybrid) working: 3 days per week on-site due to workload classificationSecurity Clearance: British Citizen or a Dual UK national with British citizenship.Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team.What we can offer you:Company Bonus: Bonus of up to 27% of base salaryCar allowance: 300 per monthPension: maximum total (employer and employee) contribution of up to 14%Private Medical InsuranceFlexible working: We welcome applicants who are looking for flexible working arrangementsEnhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatmentsFacilities: Fantastic site facilities including subsidised meals, free car parking and much more…The opportunity:As the Missile Test and Testability Expert you will be reporting in to the Test and Testability Department Head and, from a Project perspective, into the Project Chief Design Engineer. As Test and Testability Architects (TTA), we are involved in all aspects of the Missile Test process - from the early feasibility studies to series production and in-service support.As a Subject Matter Expert for Missile Test and Testability Architecture you will participate in range of missile programmes using your experience and expertise to improve the definition of test equipment technical requirements by focussing on key areas and removing waste. You’ll be managing definition of the project test strategy, Definition of Project BIT architecture including coverage requirements and improving the way we write our specifications across all projects.As a key member on the team you’ll be assessing and recommending improvements to our ways of working across TTA and lead the analysis of production test data to spot trends and diagnose failures. There will also be a need for you to lead the analysis and modelling our system to understand the test coverage and generate diagnostic instructions. Day to day you could also be involved in -Participating and supporting Red-Team reviews and activities into critical issues during development and manufacture.Supporting new product bid activities.Identify, document and deploy best practice across the department and within projects.Mentor and actively support members of the Test & Testability department.Lead / participate in roadmap development activities.What we're looking for from you:Educated to degree level (or equivalent) with significant experience of electronic test at all stages of project lifecycle, including:Electronic circuit design, testing and failure analysis techniques.Test equipment design.Experience in requirements capture.Project management and planning.Provide technical leadership to all Test related issues across design projects with proven experience in Test Equipment requirements capture and specification.Experience in DfT and testabilityProven ability to influence senior stakeholders within the business relating to technical directionSupport departmental strategy and support the department head with recruitment of the right people into the team.Strong interpersonal and well developed communication skills (written & verbal).Willingness to travel when required (UK and EU).Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a givenMBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom.We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more…We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process.Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information.SummaryLocation: Stevenage; BoltonType: Full time

Do you currently work within the Door Industry and have a passion for Field Service Engineering? A leading Automatic Entrance system manufacturer has a newly created Automatic Door Engineer (Within their installation division). Salary and Benefits for an Automatic Door Engineer - Installation. Respo

MBDA UK is seeking a Principal Manufacturing Engineer – Industrialisation to develop a manufacturing system and associated instructions, supporting risk assessment and gate reviews.

You will lead and support system-level electronic design from concept through production and deployment, and help define architectures for complex electronic equipment. Eclectic Recruitment Ltd in Bolton, Greater Manchester, is seeking an Electronic Systems Engineer for a full-time role paying £55,

Assystem GmbH in Bolton is seeking an HVAC Design Engineer for a permanent position.Your responsibilities will include overseeing HVAC design processes, reviewing technical documentation, and ensuring system integration.The ideal candidate will have a degree in Mechanical Engineering and 3-5 years o

World Class Defence Organisation based in Bolton is currently looking to recruit a Manufacturing Engineer. The department are looking for candidates with skills in the following: Verification & validation, design modifications, commissioning, FMEAs, configuration control, sub-assembly manufacturing. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non Conformance Process using SAP. Skills / Experience: Verification & validation Design modifications COMMISSIONING FMEA’s Configuration control Sub-assembly manufacturing Industrial Validation through the use of FMEA’s, translating design requirements, interpret Design Drawings with a view to producing Manufacturing Build Instructions. Management of Configuration control by the embodiment of Design Modifications, Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within and contribute to a team environment. Recognise and understand customer requirements, and respond to them. Qualifications Required: Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard)AND Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.)AND Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achievedOR Degree in a relevant Engineering subject

Electrical Maintenance Engineer – 4.5 days a week £41,000 + Bonus + Enhanced Company Benefits Hindley Green, Greater Manchester An excellent opportunity for an electrical engineer looking for a role within manufacturing offering Mon-Fri working hours with a half day on Friday. This is a great chance to work for an established engineering manufacturer in a factory-based role offering industry specific training and a comprehensive benefits package. You will be working for a reputable multinational that has a couple of sites in the UK. This is a hands-on role where you will support a site-based engineering team, tasked with carrying out electrical repairs and planned maintenance work across a range of industrial equipment. You will be supported with relevant training on specialist machinery and will be working for a company that has a leading name within its industry. This role would suit an electrical engineer looking for a hands-on role within manufacturing, offering great benefits and Mon-Fri working hours. Candidates from a manufacturing/forces/heavy engineering background are encouraged to apply. The Role: - Planned and reactive maintenance across manufacturing equipment and site infrastructure. - Supporting site engineering improvement projects. - Mon-Fri 2 shift system with a half day on Fridays. The Candidate: - Electrical engineering background - Ideally some experience within manufacturing/forces/heavy engineering - Looking for a Mon-Fri role. Electrical Maintenance Engineer, Maintenance Electrician, Electrical Engineer, Maintenance Engineer, manufacturing, mechanical, hydraulics, pneumatics, engineer, engineering, Hindley Green, Wigan, Atherton, Tyldesley, Leigh, Greater Manchester, Manchester, Lancashire, Bolton, St Helens. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK

Job Title: Water Hygiene Engineer Location: Bolton, Greater Manchester Salary/Benefits: £26k - £35k + Training & Benefits A leading name within the Water Hygiene / Treatment industry, who have recently won new contracts in the North West of England. They are recruiting for a self-sufficient Water Hygiene Engineer to service commercial and local authority premises across the region. Applicants must be able to demonstrate strong technical experience and full understanding of industry safety guidelines. Our client is renowned for supporting fantastic further training and longevity within the industry. In addition, they are offering competitive salaries and benefits (including: overtime, company vehicle, pension scheme and annual leave). We can consider candidates from the following locations: Bolton, Bury, Rochdale, Oldham, Manchester, Stockport, Altrincham, Macclesfield, Warrington, Runcorn, Ellesmere Port, Chester, Liverpool, St Helens, Skelmersdale, Southport, Ormskirk, Formby, Chorley, Wigan, Preston, Blackburn, Burnley, Birkenhead, Crosby, Leigh. Experience / Qualifications: • Hands-on experience working as a Water Hygiene Engineer, • Good knowledge of ACOP L8 and HSG 274 guidelines, • It would be advantageous to hold industry related qualifications, • Hardworking attitude, • Good literacy, numeracy and IT skills, • Comfortable working to agreed deadlines The Role: • Conducting a wide range of L8 compliance duties across varied client sites, • Showerhead and outlet descales, • Basic flushing on outlets, • Calorifier inspections, • Inspections, cleans and disinfections on cold water storage tanks, • Chlorinations, • Routine water sampling and temperature monitoring, • Completing regular service reports Alternative job titles: Water Treatment Engineer, Water Management Engineer, Environmental Service Technician, Legionella Operative, Water Hygiene Technician. Future Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills. Future Select Copyright 2026

Supplier Quality Engineer (Automotive) Bolton 12-Month Fixed Term Contract Days Role £42,000 + Bonus About the Opportunity An exciting opportunity has arisen for a Supplier Quality Engineer to join a global automotive technology manufacturer at its Bolton facility on a 12-month fixed-term contract. This is an excellent opportunity for an experienced quality professional to influence supplier performance, support new product launches and drive continuous improvement across a global supply chain. Key Responsibilities - Supplier Quality Engineer Support the approval and qualification of new suppliers through management system and process audits. Manage supplier activities throughout New Product Introduction (NPI), ensuring project deadlines are achieved. Lead Supplier APQP and PPAP approval activities. Conduct ongoing supplier audits and assessments to maintain supplier approval status. Develop suppliers through training, coaching and deployment of quality standards. Carry out supplier visits for audits, development projects and corrective action reviews. Act as the primary quality interface between suppliers and the business. Monitor and report supplier quality KPIs, driving improvements in supplier performance. Lead supplier corrective and preventive action activities. Manage quality-related aspects of supplier change control processes. Investigate and manage supplier non-conformances and rejection issues. Experience/Qualifications - Supplier Quality Engineer HNC/HND qualified in Mechanical, Electrical or Manufacturing Engineering. Qualified IATF 16949 and/or VDA 6.3 Auditor. Minimum 3 years' experience in a Supplier Quality or Quality Engineering role. Automotive experience preferred, although backgrounds in electronics, mechanical manufacturing or high-volume assembly environments will also be considered. Strong understanding of APQP, PPAP, FMEA, Control Plans, SPC, R&R and supplier development methodologies. Experience conducting supplier audits and managing supplier improvement projects. Strong communication and stakeholder management skills. Comfortable travelling to supplier sites when required. Proven ability to manage multiple projects and deadlines simultaneously. Benefits - Supplier Quality Engineer Discretionary Annual Bonus (7.5%) Up to 5.5% Employer Pension Contribution Electric Vehicle Scheme via Salary Sacrifice Free EV Charging On Site Private Medical Insurance Death in Service Cover (4x Annual Salary) For more information on this role, please contact Ben Dawson on (phone number removed), or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include : Supplier Quality Engineer, Supplier Development Engineer, Supplier Quality Assurance Engineer, SQA Engineer, Quality Engineer, Senior Quality Engineer, APQP Engineer, Manufacturing Quality Engineer, Supplier Development Specialist, Vendor Quality Engineer, Supplier Performance Engineer, Supplier Audit Engineer, Quality Systems Engineer, NPI Quality Engineer, Automotive Quality Engineer. Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process

Operations Engineer Bolton, UK About Edina Established in 1985, Edina is a leading international power generation specialist, delivering low-carbon, cost-effective energy and battery storage solutions. Using diverse fuel sources like biogas, natural gas and landfill gas, Edina supports clients in improving energy efficiency, reducing emissions, and achieving net zero goals. With over 200 professionals and global operations, Edina combines innovative technology, in-house manufacturing, and strong customer values, including sustainability, flexibility, and integrity, to provide reliable, tailored power solutions and exceptional after-sales support across public and industrial sectors. At the core of our operations is a commitment to excellence and responsibility, where safety is our top priority, and our company values guide every decision we make: People – Our staff are our core asset. Individually and collectively, they are critical to the success of our vision. Organisation – We are engaged, loyal, and accountable in achieving our goals. Work – Working safely is not just a policy, it’s our responsibility. Ethics – We embrace honesty, integrity, and respect, doing the right thing every time. Reputation – We strive for excellence in our processes, enabling us to achieve best-in-class industry standards. We are currently looking for an Operations Engineer to join our team on a full-time, permanent basis. The Benefits • Competitive salary - Attractive overtime rates - 25 days’ annual leave plus bank holidays and public holidays - Enhanced Holiday Entitlement based on length of service - Company pension scheme with an attractive employer contribution percentage - Company van - Private healthcare scheme - Life Insurance - Employee Assistance Programme - Cycle to Work Scheme - Career development opportunities - Continued investment in employee training to further enhance knowledge, expertise and creativity This is an exciting opportunity for a skilled mechanical or electrical engineer with strong knowledge of gas/diesel engines to join our leading international organisation. You will play a vital role in maintaining and optimising installations that help clients improve energy efficiency, reduce emissions and move towards Net Zero goals. What is more, you will benefit from attractive overtime rates and a strong all-round rewards package, alongside the chance to build a rewarding long-term future with a company that combines innovation with real-world impact. So, if you are looking for a position where your experience will make a visible difference every day, read on and apply today. The Role As an Operations Engineer, you will carry out scheduled and unscheduled maintenance work on installations across Bolton and the surrounding area. Ensuring that customer satisfaction is achieved, you will efficiently diagnose and implement all reactive maintenance work on our client’s installations, as well as other users’ installations. You will also oversee and work to optimise the operational processes of users’ systems to increase productivity and reduce their use of excess time and materials. About You To be considered as an Operations Engineer, you will need: • To hold a minimum of an ONC, NVQ Level 2 or City & Guilds Level 2 qualification in mechanical and/or electrical engineering, motor vehicle studies or equivalent - To be a competent time-served technician, preferably with a minimum of three years’ industrial mechanical and/or electrical experience - To possess in-depth knowledge of gas/diesel engines - To demonstrate excellent communication skills - To have effective IT skills and competency in the use of Microsoft Office packages - To hold a full, valid driving licence Hours of Work: Monday - Friday, 8.00am - 4.30pm. This role will involve weekend work and possible out-of-hours work. You will be required to participate in an established 24-hour callout programme based on a rota system. Other companies may call this role Installation Engineer, Field Service Engineer, Engine Maintenance Technician, Electrical Engineer, Mechanical Engineer, Senior Field Service Technician, or Maintenance Technician. The closing date for applications is 4.00pm on Tuesday, 1st September 2026. Due to a fast-moving market, applications may be filled on short notice, and the deadline date may be brought to a close early. Please apply early to avoid disappointment. We are an employer committed to equal opportunities, and our company is sponsored. (This position may not meet the requirements for sponsorship). So, if you are ready to join us as an Operations Engineer, please apply via the button shown. This vacancy is being advertised by Webrecruit. The services advertised by Webrecruit are those of an Employment Agency

At Warburtons, family is at the heart of our business. Five generations' worth of expertise that goes into making our bakery products allows us to continue a tradition of baking inherited over the past 150 years. Warburtons is the largest bakery brand in the UK, but that doesn't allow us to rest on our laurels. We are pioneers of the industry and ambitious market leaders, always seeking to challenge ourselves and convention. It is part of our philosophy to provide honest good sense on issues of health and well-being, helping the whole family to enjoy our products as part of a healthy, balanced diet, through a range of products to suit all meal occasions, lifestyles and tastes. Role: Multi-Skilled Engineer Location: Variety Bakery (Bolton) Hours: 4 on 4 off (days and nights) / 12 hour Shift Pattern Salary: £57,002 + Potential Overtime + Annual Profit-Related Bonus At Warburtons, engineering isn’t just about keeping the lines running – it’s about driving the future of baking. With a strong Northern heritage and a forward thinking mindset, we blend traditional values with cutting-edge technology to stay ahead of the game. That’s why we’re embracing next-generation automation and technological engineering gains, with a bold vision to become world-class. Our newly launched Engineering Academy, built in partnership with the IMechE, is one of our proudest achievements. It’s designed to develop and elevate our engineers, equipping you with the skills, training, and recognition to thrive, whether you want to deepen your technical expertise or progress your career. The Recipe You’ll join a highly skilled, collaborative team of Engineers focused on: Planned Preventative Maintenance (PPM) Root Cause Analysis (RCA) Condition-Based Monitoring (CBM) Continuous Improvement and Energy Efficiency Projects From diagnosing faults before they cause downtime to delivering long-term fixes and system upgrades, this is a hands-on, proactive role that plays a critical part in the success of our 24/7, high-speed, automated food manufacturing site. The Role You’ll join a highly skilled, collaborative team of Engineers focused on: Planned Preventative Maintenance (PPM) Root Cause Analysis (RCA) Condition-Based Monitoring (CBM) Continuous Improvement and Energy Efficiency Projects From diagnosing faults before they cause downtime to delivering long-term fixes and system upgrades, this is a hands-on, proactive role that plays a critical part in the success of our 24/7, high-speed, automated food manufacturing site. Essential Ingredients We want talented engineers who are hungry to learn, grow and make an impact. Here’s what helps you rise to the top of the list: Technically strong Multi Skilled Engineers, predominately electrically biased with mechanical skills (ideally in FMCG or high-volume manufacturing) An apprenticeship, BTEC, HNC or similar engineering qualification Experience with condition-based monitoring (thermal imaging, ultrasound, vibration analysis) is a bonus Top-tier problem-solving and root cause analysis skills A safety-first mindset, with good knowledge of H&S systems and legislation A desire to develop, contribute, and take ownership in a team striving for operational excellence Extra Dough At last and by no means least you will want to know what your breads worth. A slice of the annual profits (discretionary profit share) Family time is important to us so as well as your holiday entitlement, we'll give you the opportunity to purchase up to an extra weeks annual leave Award winning pension scheme with company contributions Life assurance Products you will love along with deals and discounts for you and the family through our Extra Dough website Continued investment in your personal development Fully stocked kitchens filled with our delicious products for you to enjoy with your daily brew! Support for your health and wellbeing, including access to free physiotherapy, 24/7 access to a confidential helpline for practical advice and a comprehensive occupational health service We respect and value difference. We look to create an inclusive workplace that promotes and values diversity. Companies that are diverse in age, gender identity, race, religion, sexual orientation, physical or mental ability, ethnicity, or any other aspect which makes them unique, are proven to be better companies. More importantly, creating an environment where everyone, from any background, can do their best work, is the right thing to do

At Warburtons, family is at the heart of our business. Five generations' worth of expertise that goes into making our bakery products allows us to continue a tradition of baking inherited over the past 150 years. Warburtons is the largest bakery brand in the UK, but that doesn't allow us to rest on our laurels. We are pioneers of the industry and ambitious market leaders, always seeking to challenge ourselves and convention. It is part of our philosophy to provide honest good sense on issues of health and well-being, helping the whole family to enjoy our products as part of a healthy, balanced diet, through a range of products to suit all meal occasions, lifestyles and tastes. Role: Multi-Skilled Engineer (Day Based) Location: Bolton Bakery Shift Pattern: Days only Hours: 4 on 4 off Salary: £50,472 + Overtime + Annual Profit-Related Bonus Why Join Us? At Warburtons, engineering isn’t just about keeping the lines running – it’s about driving the future of baking. With a strong Northern heritage and a forward-thinking mindset, we blend traditional values with cutting-edge technology to stay ahead of the game. That’s why we’re embracing next-generation automation and technological engineering gains, with a bold vision to become world-class. Our newly launched Engineering Academy, built in partnership with the IMechE, is one of our proudest achievements. It’s designed to develop and elevate our engineers, equipping you with the skills, training, and recognition to thrive, whether you want to deepen your technical expertise or progress your career. What You'll Be Getting Stuck Into You’ll join a highly skilled, collaborative team of Engineers focused on: Planned Preventative Maintenance (PPM) Root Cause Analysis (RCA) Condition-Based Monitoring (CBM) Continuous Improvement and Energy Efficiency Projects From diagnosing faults before they cause downtime to delivering long-term fixes and system upgrades, this is a hands-on, proactive role that plays a critical part in the success of our 24/7, high-speed, automated food manufacturing site. What We're Looking For? We want talented engineers who are hungry to learn, grow and make an impact. Here’s what helps you rise to the top of the list: Technically strong Multi Skilled Engineers, predominately electrically biased with mechanical skills (ideally in FMCG or high-volume manufacturing) An apprenticeship, BTEC, HNC or similar engineering qualification Experience with condition-based monitoring (thermal imaging, ultrasound, vibration analysis) is a bonus Top-tier problem-solving and root cause analysis skills A safety-first mindset, with good knowledge of H&S systems and legislation A desire to develop, contribute, and take ownership in a team striving for operational excellence Extra Dough A slice of the annual profits with our discretionary bonus scheme Award-winning pension with generous company contributions Holiday trading scheme – buy up to an extra week off per year Life assurance, plus health & wellbeing support including physiotherapy and a 24/7 helpline Continued personal and professional development through the Warburtons Engineering Academy Fully stocked kitchens (yes – crumpets, teacakes, and more) Discounts for you and your family through our Extra Dough platform Sounds like the right mix? Then it’s time to bring your skills to the table. Apply today and help shape the future of engineering at Warburtons – where tradition meets innovation, and every day is a fresh opportunity to rise. We respect and value difference. We look to create an inclusive workplace that promotes and values diversity. Companies that are diverse in age, gender identity, race, religion, sexual orientation, physical or mental ability, ethnicity, or any other aspect which makes them unique, are proven to be better companies. More importantly, creating an environment where everyone, from any background, can do their best work, is the right thing to do

HVAC Engineer - Bolton Company: CBRE Global Workplace Solutions Company Profile CBRE is the global leader in real estate services, leveraging the industry's most powerful knowledge base to meet the commercial real estate needs of clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate services firm. We employ more than 100,000 people and operate across 48 countries. Role Overview We are recruiting an HVAC Multi Skilled Engineer to join our team based in Bolton. The successful candidate will perform both electrical and mechanical maintenance across plant, equipment and building services. Key Responsibilities Identify and manage risks associated with onsite equipment, including critical spares and plant performance improvements. Manage environmental conditions via the BMS system and ensure plant and equipment operate efficiently. Use new technologies and equipment to maintain a safe, comfortable working environment, liaising with the client on reactive and planned tasks. Carry out fault-finding on a wide range of HVAC plant and equipment, with a strong focus on VRV/VRF systems. Work safely with refrigerants, ensuring compliance with F‑Gas handling requirements. Support team members on Health & Safety matters. Act as Energy Champion and assist as Safety Champion when required. Provide electrical and mechanical expertise to the maintenance team. Prepare, follow and review Risk Assessments and Method Statements. Complete all required documentation in line with legislative and company standards. Use mobile devices to manage, record and complete tasks via the CAFM system. Plan daily work using email and calendar tools to ensure efficient task completion. Liaise with the onsite Supervisor and Account Manager to resolve building services issues. Deputise for the Site Supervisor during periods of absence. Work overtime when required, including nights and weekends if necessary. Supervise and manage subcontractors as needed. Participate in an on‑call rota for out‑of‑hours emergency response. Undertake additional ad‑hoc duties as required. Experience & Qualifications Required Recognised or time‑served apprenticeship. Strong, proven experience in HVAC maintenance. Mechanical qualifications to a City & Guilds standard. Good multi‑skilled capability. Strong fault‑finding skills. Ability to supervise contractors. Competence in producing Risk Assessments and Method Statements. Ability to prepare and understand permits and safe systems of work. F‑Gas certification and experience working with refrigerants. Desirable Qualifications Working at Height qualification. IPAF / PASMA certification. AP qualifications. Experience with BMS systems. Knowledge of HVAC controls

A global engineering consultancy is seeking an HVAC Engineer for their Manchester team in the Nuclear Sector. The role involves supporting HVAC system design solutions, collaborating closely with engineering teams, and ensuring that all designs meet safety and performance standards. Candidates must

Relevant experience of system definition, system architecture development, requirements specification, design/performance modelling, systems integration, system assessment and acceptance. Our Embedded Systems Solutions department (ESS) encompasses all activities outlined under the Automotive SPICE (

MBDA in Bolton is seeking an RF & Electronics Engineer to lead production support for Datalink products in a state-of-the-art facility. The role includes hands-on factory trials, documentation, and design-for-test/manufacture considerations, with opportunities to guide junior engineers and shape pro

Jonathan Lee is seeking a System Integration and Test Engineer with automotive system integration and integration testing experience to help shape reliable vehicle systems. You will work in a fast-moving automotive engineering environment, gaining hands-on time on real rigs and vehicles and building

If you are an experienced Combat System Engineer and are ready to take the next step in your career by working with advanced technology in the Defence & Security sector, we would love to hear from you. Our client, a leader in the Defence & Security sector, is seeking a skilled Combat System Engineer

System Recruitment is seeking a dedicated Field Service Engineer to install, service, and repair complex equipment at client sites across Reading and regional locations.

The position involves delivering engineering aspects of the UK Portfolio, engaging with senior stakeholders, and developing system design trade-offs and requirements across programmes and centres of excellence. Applicants should have a solid grasp of weapon/missile system life cycles, strong stakeho

As an Electrical Systems Engineer, you will support the development of advanced electrical power generation and distribution technologies, contributing to the definition of future system architectures and technology strategies. We're partnering with a leading UK engineering and technology organisati

Electronic System Engineer Key Responsibilities. Electronic System Engineer Key Requirements. Jackson Hogg is delighted to be working with a leading diagnostics business which is scalng up it's engineering team due to new international investment.

Indra Group UK & Ireland is seeking a Systems Engineer to join our Engineering team on the TfL ticketing project. You will analyse, design, integrate, and deliver complex systems to meet customer requirements and project objectives. You will work with customers, project managers, software and hardwa

Experience building GPU drivers, graphics systems, or low‑level systems software. If you are passionate about low‑level systems, performance tuning, and pushing the limits of GPU capabilities, this role offers a unique platform to make a direct impact on advanced GPU design and development. Tech

Develop and maintain system-level hardware defect detection tests for individual servers and rack-based systems. BS or MS in Electronics and Electrical, Computer, or Systems Engineering. Fractile is building silicon, systems and software which will redefine the frontier of AI: running the world’s

You could be an experienced BEMS Engineer, Controls Engineer, Building Controls Engineer, BMS Design Engineer or someone from a related Building Technologies / Control & Instrumentation background. If you're a BEMS/Controls Engineer who enjoys the engineering and design side of controls and wants to

As a Lead Control Systems Engineer, you will be expected to model the DC system, the AC network equivalents, renewable systems (wind parks, solar PV cells etc. As a Lead Control Systems engineer you will report to the Control Systems Manager. Engineering degree or equivalent with experience in power

Knowledge of systems engineering fundamentals (host networking, storage, Linux operating systems). As a System Development Engineer you will help to deploy, manage, fix and reinvent the software tools, services and components that network engineering rely on to automate our network and keep it opera

MBDA Miissle System is looking for a Principal Electrical Component Engineer to join their team in Bolton.

This is an outstanding opportunity for a Principal/Senior Controls Engineer to join a specialist engineering business with decades of expertise delivering advanced control systems. Working on technically challenging projects from tender through to commissioning, you'll take a leading role in the des

Degree in Electrical/Power Systems Engineering.

Reed is seeking a System Design Engineer for Redhill, Surrey, on a full-time permanent basis. You will collaborate with engineering teams while ensuring designs meet standards and customer requirements, with SC clearance eligibility noted in the posting.

Principle System Engineer with extensive FPGA (ideally using VHDL) and firmware design and development is sought on a hybrid basis by a multi award winning international engineering firm based near Gloucester. With over 15 years of R&D and innovation in their field this Principle System engineer wil

Working within the Central Systems Integration (CSI) team, you will be responsible for coordinating the integration and delivery of customer features and functions across multiple engineering domains, ensuring successful progression through programme milestones and final engineering sign-off. System

Do you have automotive system integration and integration testing experience, ideally within systems engineering programmes? if so, step into a brilliant opportunity as a System Integration and Test Engineer, where your work directly shapes reliable vehicle systems and delivers confidence in every b

Other suitable skills and experience include Electronics Engineer, Systems Engineer, Hardware Engineer, Product Development Engineer, Medical Device Engineer, Embedded Systems Engineer, Compliance Engineer, Electrical Engineer, R&D Engineer, Mechatronics Engineer. Genedrive is seeking a knowledgeabl

Do you have a thorough understanding of the systems design lifecycle, from requirements definition and design reviews through system integration and assessment/acceptance? Step into a high-impact engineering role with real visibility, where your planning, coordination, and problem-solving directly h

The Portfolio Systems team supports this vision by developing the engineering coherence through Commonality, Modularity and Reuse across the UK Portfolio of Complex Weapons - current and future - by managing and delivering the Portfolio Engineering Design Record (EDR). The role will allow the indivi

The ideal candidate should have a BS or MS in Electronics and Electrical Engineering, along with 3–7 years of experience in testing systems and servers. A cutting-edge technology company based in the UK seeks a Test Engineer to develop and maintain system-level hardware defect detection tests.

MBDA is seeking an ambitious Mechanical Engineer to join our Calibration & Maintenance team in Bolton. This is a unique opportunity for a skilled Mechanical Engineer to join a technically engaging environment supporting manufacturing across assembly, integration, and test. Working closely with produ

The key requirements of the Control Systems Engineer will be:. A global friction welding manufacturer is looking for a Control Systems Engineer to join their team based in the Birmingham area. The key responsibilities of theControl Systems Engineer role will be:.