Offres planning engineer à LutonCréer des alertes d'emploi

\n Product Security Engineer \n Luton \n 6-month contract \n Paying up to Circa £93p/h (Inside IR35) \n \n Please note - Due to the nature of the work, you'll be required to hold a high level of UK Security Clearance \n Overview: As the Product Security Engineer /Lead security Engineer, you'll take responsibility for all security aspects of product design, development, verification and maintenance through all phases of the product lifecycle. \n The role will focus on undertaking security risk assessments, preparing security risk mitigation plans, deriving security requirements and working closely and directly with product development teams to design, implement and maintain appropriate security controls and the production of wider security artefacts. \n \n Responsibilities: \n\n • Production of Security Management Plans, work package descriptions and cost estimates in support of product bids, services and proposals.\n, • Undertaking security risk assessments, risk mitigation plans, mitigation gap analysis and preparation of security management documentation for system assurance.\n, • Defining product security requirements, advising development teams on bespoke implementations for product security control implementations and overseeing product development activities.\n, • Liaison with internal and external security assurance authorities to desmontrate product compliance against recognised UK and wider frameworks.\n, • Driving collaborative working with external security authorities such as the NCSC to provide underwriting of security solutions.\n, • Understanding and management of security activities within development, testing and manufacturing environments.\n, • Advising development teams on suitable platform lockdown and configurations, and supporting penetration test activities. Analysing penetration test results and preparation of remedial action plans.\n, • Identify, communicate and drive through life security management, including but not limited to obsolescence planning, vulnerability and patch management for all products within area of responsibility.\n, • Lead security incident management teams during incident/crisis situations in conjunction with Head of Product Security for EW/FCA.\n, • Review, maintain and participate corporate product security policies.\n, • Deliver product security training to project engineering teams.\n\n \n Essential Skills & Experience \n\n • Experience in the development of besoke product-based security solutions for a military and/or commercial products and systems.\n, • Graduate degree in relevant engineering, computing or related scientific discipline, and/or evidence of further professional study.\n, • Full membership of an NCSC recognised professional security body organisation (i.e. CIISec, ISC2 or ISACA).\n, • Recent experience and demonstratable knowledge of live and legacy UK/EU/NATO information security standards and frameworks, including the UK MOD Secure by Design framework, GovS 007, HMG IS1&2, ISO27001, NIST SP800-30/37/53, UK MOD Information Security related JSPs, EU CRA and US DoD information security policies.\n, • Practical experience of producing technical assurance documentation such as Key Management Plans, Testing Security Instructions, Security Operating Procedures and Security Cases.\n, • Knowledge of current cryptographic technologies and key management systems.\n, • Understanding of Model Based System Engineering (MBSE) and how Product Security directly inputs into the process.\n, • Knowledge and understanding of bespoke product-specific Operating Systems, Firmware and Software security controls and how to apply them.\n, • Knowledge of Quantum Cryptography & Quantum Key management.\n, • Experience or knowledge of existing threat intelligence sources.\n, • Knowledge of NATO security policy, risk management and Accreditation.\n\n \n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Mobile Generator Service Engineer - Diesel Generators - South East - up to £45,000 About the company We're looking for a Mobile Generator Engineer / Power Engineer who will be required to travel regularly to different locations across the South East territories maintaining and repairing generators varying from 20KVA to 1250KVA and various other equipment within our range, providing an onsite service to customer. This will include finding and capturing machine damage and keeping accurate and comprehensive service and maintenance records. It is also really important that you communicate effectively, ensuring that you are Line Manager and Customers are kept informed as required. Mobile Generator Service Engineer - The Details \n\n • Basic salary up to £45,000\n, • OTE £55,000 PLUS\n, • Company van provided - business & personal use \n, • Mobile phone and laptop\n, • Overtime paid and door-to-door\n, • Specialist PPE provided\n, • Company contributory pension\n, • Employee discount\n, • Private Healthcare\n, • 25 days holiday plus BH \nMobile Generator Service Engineer - Requirements & Responsibilities\n\n, • Need to have completed servicing on generators of a minimum of 20kva, and ideally up to 1250kva, and also be able to show experience of fault finding and repairs of this range of generators.\n, • Strong understanding of Electrical principles and practices\n, • Experience with solder techniques and equipment\n, • Knowledge of System design principles and methodologies\n, • Familiarity with Mechanical knowledge for system integration\n, • Excellent problem-solving skills and attention to detail\n, • Prior experience in the generator industry or similar\n, • Able to work as part of a team, supporting colleagues\n, • Flexible and self-motivated, you will be keen to embrace new training opportunities, which may on occasion require staying away from home\n, • Great communication skills - both verbal and written\n, • Customer-Focused with a commitment to delivering an excellent service\n, • Effective planning and organisation skills with strong attention to detail and accuracy\n, • A valid driving licence with no more than 6 points \n This position offers a competitive salary, benefits package, and opportunities for professional growth. If you are a motivated Generator Engineer with a passion for innovation, we encourage you to apply.About Us Detail2Recruitment acts as an employment agency in respect of this position. Due to the volume of applications we receive, we are unable to give feedback on unsuccessful applications. For information on how we use your personal information, please refer to detail2recruitment privacy policy

Planning Engineer – MRO – Aviation \n £55,000 - £60,000 (including shift) \n 5-5-4 (Days) - Flexible Shift Times \n Luton \n Permanent \n \n Client Overview: \n The client is a leading MRO for commercial aircraft, who have stations across the UK and internationally. Across the network they support A320, A330, A350, B737, B777 & B787. \n \n Role Overview: \n The Planning Engineer shall generate and control aircraft maintenance work packages, ensuring regulatory compliance at all times throughout the company. \n

Company description:Fantastic challenges. Amazing opportunities.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career.Job description:Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines.As part of the Manufacturing Engineering team, the Senior Manufacturing Engineer will report directly to the Manufacturing Engineering Manager, with day-to-day guidance and support provided by the ME Team Leader. Based at our Luton site and supporting Defence business lines, there may occasionally be a need to travel to equipment supplier locations. The Senior Manufacturing Engineer will join a team focused on either Jet Canopies or Helicopters, contributing to the development of manufacturing processes as well as supporting daily operational activities.Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday, earlier finish on Friday to start the weekend.Job Responsibilities Local project technical lead for the implementation of production planning, from original concept through to production.Design high capability manufacturing processes using GKNs Zero Defect Manufacturing (ZDM) tool suite, (APQP Core Tools).Develop, document and optimise manufacturing processes such as creation/amendment SOP (Standard Operating Procedure) and Process SpecificationsCreate and update engineering documentation, manage point of introduction activities.Lead structured improvement activities to reduce process driven scrap and reworkProvide MRB (Material Review Board) support to existing programmes to ensure any process deviation or product faults are reviewed and answeredMake presentations at senior level internally and externally demonstrating ability to clearly communicate to the audienceIdentify, anticipate and offer solutions to technical problemsEstablish & improve production process controlsComply with company Environmental, Health, Safety and Energy procedures.Profile description:To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes:Essential:Minimum HND qualification (or equivalent) in Mechanical, Electrical, Industrial or Manufacturing Engineering/AerospaceDemonstrable Manufacturing Engineering experience gained from ideally the Aerospace, Automotive, Yellow Goods industry6Sigma Greenbelt qualificationExperience in APQP standards including Process Flow Diagram, Process Failure Mode Effect Analysis, Process Control Plans, Measurement System Analysis and Process CapabilityExperience of root cause analysis using Fishbone (Cause and Effect) Diagrams and 5 Whys (Five Whys) techniquesDemonstrable experience of practical problem-solving techniques using A3 or 8DDesirable:Experience Leading Lean Manufacturing including process standardisation kaizen activities such as 5SExperience in lay-up processes for composite materialsSpecification interpretation experienceWe are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Senior Manufacturing Engineer will have the ability to communicate effectively at all levels within an organisation and be flexible in their approach. The successful person will have a hands-on, creative approach to collaborate with multiple departments to improve manufacturing processes.Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role.The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we will assess each case individually)We offer:Once youre on board youll get the following perks and benefits:Competitive salary dependent on experienceThe opportunity to earn up to 15% bonusIndustry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basisLife Assurance 8 x salary185 hours holiday + bank holidaysIncome protectionShopping discountsCycle To Work SchemeEmployee Assistance ProgrammeVirtual GP Clinic for you and immediate familyElectric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included)Free onsite parkingLocal gym discountFree airport parkingDiscount with local nursery and preschool childcare settingEnhanced family friendly leaveA collaborative, dynamic working environmentAs well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you!Join us and keep the world moving click on the link below to applyA Great Place to work needs a Great Way of WorkingEveryone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?TPBN1_UKTJ

Company description:Fantastic challenges. Amazing opportunities.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career.Job description:Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines.The Luton Engineering & Technology team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications.Were looking for a Senior Materials Engineer with a strong non-metallic materials engineering background, to join our materials and test team to support the production and development of next generation composite aero structures, ice protection and transparency products. The role will be based in the Materials and Test (M&T) team within the wider Engineering and Technology department and report to the Functional Team Leader.The role as a Senior Materials Engineer will support the business and engineering team, with non-metallic, polymer materials science and processing knowledge and guidance. Concentrating on thin film coating technologies and transparency materials. The role will initially lead a transparency coatings validation project before moving onto site production support and material obsolescence projects. The role will require a knowledge of the interactions between processing parameters and material properties of Acrylics, Polycarbonates and Polymers, being able to guide new technology test plans and current production deviations.You will support the work of the business to establish safe working practices and necessary level of documentation. You will be involved with projects from the planning / assembly / instrumentation / commissioning phase though to successfully performing and reporting the test. You will also be responsible for providing specialist support to existing programmes within your field of expertise, helping to resolve manufacturing issues and supporting continuous improvement efforts.You will have a proven track record of leading and delivering technical work, with strong communication skills being confident working with a broad range of internal and external stakeholders, including non-technical audiences.Job Responsibilities Development of manufacturing processes in relation to transparent polymer and adhesive materialsQualification of materials and processes to ensure they comply with the requirementsLead thin film polymer coatings projectsLead material obsolescence and REACh affected material replacement projectsInteract with different levels of leadership across the business, reporting progress to senior managers and site leadership team.Work closely with Principle Materials Engineer to effectively manage the Material Obsolescence processCollect inputs, related to a task and take it through an identified process to produce an output / deliverable adhering to quality and schedule requirements.Exemplifying a safety-first mind-set and ensuring compliance with the GKN Aerospace Health, Safety and Environmental policies and standards.Supporting production material related queries and issues, regarding re-life, testing and investigations.Developing, optimizing and maintaining specifications and handbooks related to non-metallic polymers; ensuring they are compliant with all relevant customer, regulatory, and airworthiness requirements.Preparing and defining tests/test plans; critical and systematic interpretation and analysis of test data, applying the outcome of tests for substantiation of specification changes.Defining activities in a project-oriented fashion with identification of deliverables, milestones and associated planning.Troubleshooting and production support on Materials Issues (e.g. Polymers and bonding).Interfacing with customers on a technical (M&T) level.Maintaining contacts with suppliers regarding alternative/new products.Integration into the wider, global engineering function, collaborating with other sites around the world.Contribute to the development of GKN as a 'great place to work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership.Profile description:To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes:Essential:Chemistry / Materials Science / aerospace engineering education, BSc / MSc levelKnowledge of / experience in Polymer material science and processingSignificant relevant experience within an industrial engineering discipline, preferably within an aerospace environmentExperience with quality systems, specifications, standards, etc., with the ability to oversee the broader fieldExcellent reporting and project management skills; Good command of the English language, both verbally and in writing,Team player at all levels in the company, pro-active attitude, but also capable of acting on an individual basis and reporting back to the relevant parties within GKN.Desirable:Ability to plan work through formal project management processes, to ensure successful delivery of required outcomes.You will have an awareness of aerospace certification requirements.Knowledge of / experience in Transparent thin film coatingsAs Senior Materials Engineer you should have a broad interest in Aerospace engineering with a high level of understanding in non-metallic material technologies & testing and characterisation techniques. Youll be able to adapt to changing priorities to meet business priorities handling multiple enquires at once. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal and external stakeholders, including operations and other business functions.The successful candidate should be adaptable in their approach to work, and be able to adapt to potentially dynamic priorities. As a Senior Materials Engineer, you will be naturally curious and seek to increase/deepen their own technical knowledge through study, collaborative working, hypothesis testing and experimentation.Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role.The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we will assess each case individually).We offer:Once youre on board youll get the following perks and benefits:Competitive salary dependent on experienceThe opportunity to earn up to 15% bonusIndustry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basisLife Assurance 8 x salary185 hours holiday + bank holidaysIncome protectionShopping discountsCycle To Work SchemeEmployee Assistance ProgrammeVirtual GP Clinic for you and immediate familyElectric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included)Free onsite parkingLocal gym discountFree airport parkingEnhanced family friendly leaveA collaborative, dynamic working environmentAs well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you!Join us and keep the world moving click on the link below to applyA Great Place to work needs a Great Way of WorkingEveryone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ??TPBN1_UKTJ

Key Responsibilities Generate and issue aircraft maintenance work packages for production staff Ensure maintenance activities are carried out in accordance with airworthiness regulations and company procedures Support with maintenance costings and hours reviews Create and maintain work cards, plann

Lead Product Security Engineer Location: Luton – hybrid working Rate: £92.50 per hour Umbrella Contract: 6 months Clearance: Active SC required; DV desirable Nationality: Sole British nationals only due to UK Eyes Only requirements We are recruiting for experienced Lead Product Security Engineers to support a major organisation within the UK defence sector. The role will take responsibility for security aspects of complex defence products and systems throughout the full engineering lifecycle, from design and development through to verification, maintenance and through-life support. Working closely with product development teams, engineering SMEs, risk owners and security assurance authorities, you will lead security risk and assurance activities, derive product security requirements and ensure appropriate security controls are incorporated into product design. This is a Product/Systems Security Engineering role rather than a corporate IT or enterprise cyber security position. Key Responsibilities Undertake security risk assessments and develop risk mitigation plans and gap analyses. Produce Security Management Plans and security documentation supporting product development and assurance. Define and derive product security requirements , working directly with engineering teams on their implementation. Provide security advice throughout product design, development, testing and manufacturing. Produce technical assurance artefacts including Security Cases, Security Operating Procedures, Testing Security Instructions and Key Management Plans . Liaise with internal and external security assurance authorities to demonstrate product compliance. Apply MOD Secure by Design principles throughout the engineering lifecycle. Work with external security authorities, including the NCSC, to support assurance of security solutions. Advise engineering teams on platform lockdown, configuration and appropriate product security controls. Support penetration testing, analyse findings and develop appropriate remediation plans. Manage through-life security activities including vulnerability management, patch management and obsolescence planning . Support security incident and crisis management activities. Review and contribute to Product Security policies and deliver security guidance and training to engineering teams. Support bids and proposals through the production of Security Management Plans, work package descriptions and cost estimates. Skills & Experience You will ideally have: Significant experience developing and maintaining bespoke product-based security solutions within Defence, Government, military or similarly complex engineering environments. Recent experience of MOD Secure by Design . Strong security risk assessment, risk mitigation and technical assurance experience. Experience deriving and managing technical security requirements for products or systems. Experience producing Security Cases, RMADS and/or comparable security assurance documentation. Knowledge of UK MOD and Government security standards and frameworks, including GovS 007, HMG IS1 & IS2 and relevant JSPs . Knowledge of frameworks including NIST SP800-30/37/53 and ISO 27001 . Experience working directly with product development and engineering teams. Knowledge of current cryptographic technologies and key management systems . Understanding of product-specific operating systems, firmware and software security controls. Understanding of Model Based Systems Engineering (MBSE) and how Product Security integrates into the engineering process. Experience supporting vulnerability management, patching and penetration testing/remediation. Excellent communication skills with the ability to influence engineering teams, customers and senior stakeholders. A relevant engineering, computing or scientific qualification and professional security membership such as CIISec, ISC2 or ISACA would also be beneficial. Desirable Current DV clearance . Common Criteria security evaluation experience. NATO security policy, risk management and accreditation experience. Knowledge of threat intelligence sources. Knowledge of quantum cryptography and quantum key management. Experience engaging with UK Government, NCSC or NATO security authorities. TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a Senior Systems Engineer (Electronics) you will draw on your diverse engineering background and the product lifecycle awareness to work on a variety of research activities in the TRL1-6 range. You must have sound experience in leading technical work, including budgeting, schedule and risk management. You will be capable of achieving through others internally and externally, and you will be committed to development of your own skills and professional network. Your proactive nature will enable you to understand and adapt to new technology areas quickly. The Luton team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems and specialist structures for both civil and defence applications. The areas of activity cover but is not limited to: Electro-thermal systems and Electro-mechanical systems, Specialist materials and coating systems, Embedded and structural composites, Aircraft transparencies, Icing modelling and analysis, Sensing and data acquisition, Electrical and software control systems and digital engineering / manufacturing. This role is to provide analysis and design data to support ice protection system design through modelling and simulation of in-flight icing behaviour of aircraft surfaces, or representative surfaces. It is further expected that the role holder develop an in-depth understanding of the icing wind tunnel facility capabilities, and provide consultation and support to customers and other third party users ensuring testing is conducted in line with relevant standards and specifications and contributing to test reports as required. This expertise is to be developed through understanding icing physics and aircraft ice protection philosophies (particularly electrothermal), and through practical experimentation and modelling verification using the research icing wind tunnel.The successful candidate should have a broad engineering knowledge base but have a desire to specialise and in time develop the in depth knowledge to become a subject matter expert in icing analysis and testing, being able to support next generation ice protection system designs. We are seeking someone adaptable in their approach to work, and be willing to understudy other team members in their areas of expertise to ensure project objectives are met. As a Senior Systems Engineer (Electronics), you will be naturally curious and seek to increase/deepen your own technical knowledge through study, collaborative working, hypothesis testing and experimentation. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. The role requires flexibility for occassional national travel to meet with customer and we offer the opportunity to work from home up to two days per week dependent on business need. Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied. You may have budget accountability for a Work Stream or Work Package Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives. Support or lead the design of external work packages to be carried out by third parties in order to meet project research objectives. Responsible for accurately capturing and recording data and results from test work and development trials. Responsible for raising and issuing high quality and detailed technical documentation. Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s) Responsible for preparation of Technology Development Plans and Technology Business Cases within your project(s) Ensure all planning documentation in your responsibility is regularly updated, accurate, and delivery is on track. You may also have schedule accountability for your project(s) Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead. Drive project(s) toward exploitation, identifying and supporting industrialisation scenario development. Support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases. Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: HNC, degree or equivalent experience in electrical or systems engineering Experience delivering designs for electro-mechanical, sensing OR controller systems within an engineering environment Electronics pcb design experience Good general engineering/technology knowledge base and can demonstrate strategic thinking. Working knowledge of aerodynamics and an appreciation of physics based modelling approaches for thermodynamic analysis. Experience of test/experimental design, and practical execution in laboratory or test facility conditions to defined standards, and be able to contribute to the development of new test methods. Strong self-starter, able to execute tasks according to plan. Logical and methodical approach to task planning. Experience managing deployed resources (people you lead but you are not their line manager). Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetings. Desirable: A higher degree qualification such as a Masters, PhD or EngD General awareness of budget and schedule management. An awareness of aerospace certification requirements. Experience of the Systems Development Lifecycle process You will be developing your own network and you will have a general awareness of key companies and key individuals who operate in the wider aerospace technology and engineering field We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Line Up Aviation, based in the United Kingdom, is seeking a Planning Engineer to join a well-established aviation maintenance operation in Luton. Ideal candidates will have aviation planning or aircraft maintenance experience, strong organisational skills, and proficiency with MS Office.

Are you a Business Development Manager with experience selling engineered or industrial solutions into manufacturing or process industries? This is an opportunity to combine technical sales with genuine long-term career progression within a specialist water treatment business. BASIC SALARY: Up to £55,000 BENEFITS: · Annual Bonus linked to business growth · Pension · 23 Days Holiday LOCATION: This is a hybrid role, you must be commutable to our office in Hertfordshire. COMMUTABLE LOCATIONS: Luton, Stevenage, Bedford, Cambridge, St Albans, Milton Keynes, Hemel Hempstead, Northampton JOB DESCRIPTION: Technical Sales Manager, Business Development Manager - Water Treatment, Process Equipment As our Business Development Manager, you'll be responsible for driving new business growth whilst developing an established customer base across the UK. Working with Engineering Managers, procurement professionals and business owners, you'll provide technically engineered water treatment solutions into industrial and process markets. Initially, your focus will be approximately 70% account management and 30% new business development, building long-term customer relationships and identifying opportunities to grow revenue. As your knowledge of the business develops, you'll gain increasing exposure to commercial strategy, operations and business management as part of a planned succession programme. You will: · Sell technically engineered water treatment and process equipment solutions into industrial markets. · Prepare quotations, negotiate commercial agreements and manage opportunities through to completion. · Work closely with technical colleagues and manufacturing partners to deliver the right solution for every customer. · Contribute towards future business growth through market development, commercial strategy and long-term planning. PERSON SPECIFICATION: Technical Sales Manager, Business Development Manager - Water Treatment, Process Equipment You'll enjoy building long-term customer relationships and be motivated by winning new business. You're commercially aware, naturally curious and keen to develop your career beyond sales, with an interest in understanding how a successful engineering business operates. Previous experience within water treatment would be beneficial, but we're equally interested in candidates from other technical or industrial sales backgrounds who can demonstrate a consultative approach and the ambition to progress. You'll also have: · A successful track record of generating new business whilst developing existing customer relationships. · Experience selling engineered products, capital equipment or technical solutions into industrial markets. · The ability to understand technically complex products and recommend the right solution for each customer. THE COMPANY: For over 20 years we've been designing and manufacturing high-quality engineered water treatment systems for customers across a range of industrial sectors. Our reputation has been built on technical expertise, high-quality engineered solutions and exceptional customer service. PROSPECTS: This role has been created as part of our long-term succession planning strategy. You'll begin by developing your commercial expertise before gaining exposure to wider business functions including operations, finance, production and strategic planning, creating genuine opportunities to progress into senior leadership within approximately five years. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Technical Sales Manager, Business Development Manager, Area Sales Manager, Sales Engineer, Key Account Manager, Technical Sales Engineer - Process Engineering, Water Treatment, Water Purification, Filtration, Pumps, Valves, Process Equipment, Industrial Automation, Process Control, Manufacturing Equipment, Industrial Machinery, Utilities, Chemical Processing, OEM, Engineering, Industrial Manufacturing. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SM18608, Wallace Hind Selection

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. Join our Transparencies team as a Principal Design Engineer and help drive innovative design solutions. We are looking for a Principal Design Engineer to join our Transparencies team to support a portfolio of new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows. The Principal Design Engineer is a technical authority within the Transparency Systems team, responsible for leading complex product development, driving technical strategy, and ensuring engineering excellence across multiple programmes. It spans the full lifecycle: advanced concept development, requirements definition, geometric design, materials and process selection, supporting tooling design, manufacturing development, qualification, and in service support. The Principal Design Engineer also plays a major role in shaping technology roadmaps, mentoring engineering teams, and representing the business in high-level customer, regulatory, and airworthiness discussions. This role requires flexibility for occasional travel, both within the UK and internationally. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Act as the technical authority for transparency design across multiple programmes, ensuring design integrity, safety, and compliance with customer, regulatory, and airworthiness requirements. Lead the definition of design standards and engineering best practices for transparency systems and approve design solutions, specifications, concessions, rework schemes, and compliance documentation. Provide expert guidance on requirements management, materials selection, structural performance, optical performance, manufacturing processes and qualification methods. Represent Design function in MRBs and serve as the primary escalation point for all MRB-related queries, exercising technical authority to determine and approve the disposition of non conforming parts. Define and validate test methods and/or alternate means of compliance (analysis/similarity) as required to demonstrate design solution complies with requirements. Act as a senior technical interface with customers, suppliers, regulatory bodies, and internal stakeholders. Communicate complex technical information clearly to both technical and non technical audiences. Lead major technical reviews, gate reviews, and customer design reviews, ensuring high quality technical data and presentations. Identify, assess, and manage technical risks across programmes, proposing mitigation strategies and influencing programme direction. Support capability development within the Transparency Systems team including training, knowledge capture, and succession planning. You will contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Degree in Aerospace, Mechanical or similar Experience in Aerospace design / or Aerospace product development. Deep understanding of the full product lifecycle, design practices, manufacturing processes, and airworthiness requirements. Proven ability to lead complex engineering work packages and solve complex technical problems using evidence based, methodical approaches. Familiarity with digital engineering and model based design preferably using CATIA V5. Excellent communication skills, able to create clear, concise, and accurate technical content and present to senior stakeholders. Desirable: Expert user of CATIA V5 for complex modelling and drawing creation Chartered Engineer status (CEng) Experience working with defence customers and regulatory authorities. Experience in transparencies, composites, or specialist structures/ systems. This is a hands on role, and the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You'll have strong leadership qualities with experience mentoring and developing engineering teams. You should be adaptable in your approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met. As Principal Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Service Contracts Manager Location: Field Based (UK Travel Required) Reports To: Regional Service Manager About the Role We are seeking an experienced and commercially focused Service Contracts Manager to be responsible for the effective management and retention of service contracts and key customer accounts within a defined region. The successful candidate will maximise contract revenue and profitability through strong account management, operational collaboration, contract governance, and customer relationship management. This role requires close partnership with service, sales, finance, and operational teams to ensure contractual commitments are delivered successfully while identifying opportunities for business growth. Key Responsibilities Contract & Account Management Develop and maintain key account plans to maximise the value and growth potential of contracted accounts. Build and maintain strong relationships with key customer stakeholders. Act as the primary point of contact for contract reviews and service provision changes. Monitor contract performance against agreed service level agreements (SLAs). Ensure high levels of customer satisfaction and service delivery excellence. Identify opportunities to expand products and services within existing accounts. Commercial & Financial Management Manage the retention and renewal of service contracts. Ensure accurate capture and invoicing of all contracted activities. Implement annual contract price increases where applicable. Provide accurate revenue forecasts on a weekly, monthly, quarterly, and annual basis. Work closely with finance teams to resolve invoicing and credit control matters. Analyse contract performance, commercial trends, and profitability. Operational Coordination Collaborate with regional service and operational teams to ensure efficient contract delivery. Facilitate effective communication between service, sales, administration, and finance teams. Ensure all contract implementation and setup documentation is completed accurately. Maintain up-to-date contract records within company systems. Support timely contract renewals and amendments. Reporting & Analysis Produce management information and performance reports for contracted customers. Generate account analysis and business reports for internal stakeholders. Utilise business systems and reporting tools to extract and analyse data. Investigate and explain variances relating to service delivery, compliance, and financial performance. Skills & Experience Essential Commercial and service management experience within a healthcare or medical services environment. Strong contract management and account management experience. Excellent organisational and planning skills. Strong analytical and problem-solving capabilities. Experience interpreting operational and financial performance data. Excellent communication and relationship-building skills. Advanced Microsoft Office skills, including: Excel Word PowerPoint Outlook Teams Ability to work effectively with multiple stakeholders across different functions. Desirable Qualified Engineer or technical background. Experience negotiating service contracts and commercial agreements. Experience presenting management information and performance data to customers and senior stakeholders. Key Competencies Influencing & Negotiation Builds credibility and trust with customers and colleagues. Gains commitment through effective persuasion and negotiation. Promotes solutions and recommendations confidently. Influences stakeholders at multiple levels. Analysis & Communication Produces clear, concise, and professional written communication. Presents information in a structured and logical manner. Tailors communication style to suit different audiences. Explains complex information clearly and effectively. Presentation Skills Confident presenter with strong communication skills. Able to engage audiences and respond effectively to feedback. Delivers presentations professionally and credibly. Planning & Organisation Prioritises workload effectively. Plans activities and projects in advance. Meets deadlines and manages competing priorities. Organises resources to achieve business objectives. Adaptability Responds positively to change. Adapts working style to different situations and stakeholders. Demonstrates resilience and flexibility. Embraces new ideas and continuous improvement initiatives. This is an excellent opportunity for a commercially minded service professional with strong contract management experience to play a key role in driving customer retention, service excellence, and business growth. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website

Product Security Engineer Luton 6-month contract Paying up to Circa £93p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to hold a high level of UK Security Clearance Overview: As the Product Security Engineer /Lead security Engineer, you'll take responsibility for all security aspects of product design, development, verification and maintenance through all phases of the product lifecycle. The role will focus on undertaking security risk assessments, preparing security risk mitigation plans, deriving security requirements and working closely and directly with product development teams to design, implement and maintain appropriate security controls and the production of wider security artefacts. Responsibilities: Production of Security Management Plans, work package descriptions and cost estimates in support of product bids, services and proposals. Undertaking security risk assessments, risk mitigation plans, mitigation gap analysis and preparation of security management documentation for system assurance. Defining product security requirements, advising development teams on bespoke implementations for product security control implementations and overseeing product development activities. Liaison with internal and external security assurance authorities to desmontrate product compliance against recognised UK and wider frameworks. Driving collaborative working with external security authorities such as the NCSC to provide underwriting of security solutions. Understanding and management of security activities within development, testing and manufacturing environments. Advising development teams on suitable platform lockdown and configurations, and supporting penetration test activities. Analysing penetration test results and preparation of remedial action plans. Identify, communicate and drive through life security management, including but not limited to obsolescence planning, vulnerability and patch management for all products within area of responsibility. Lead security incident management teams during incident/crisis situations in conjunction with Head of Product Security for EW/FCA. Review, maintain and participate corporate product security policies. Deliver product security training to project engineering teams. Essential Skills & Experience Experience in the development of besoke product-based security solutions for a military and/or commercial products and systems. Graduate degree in relevant engineering, computing or related scientific discipline, and/or evidence of further professional study. Full membership of an NCSC recognised professional security body organisation (i.e. CIISec, ISC2 or ISACA). Recent experience and demonstratable knowledge of live and legacy UK/EU/NATO information security standards and frameworks, including the UK MOD Secure by Design framework, GovS 007, HMG IS1&2, ISO27001, NIST SP800-30/37/53, UK MOD Information Security related JSPs, EU CRA and US DoD information security policies. Practical experience of producing technical assurance documentation such as Key Management Plans, Testing Security Instructions, Security Operating Procedures and Security Cases. Knowledge of current cryptographic technologies and key management systems. Understanding of Model Based System Engineering (MBSE) and how Product Security directly inputs into the process. Knowledge and understanding of bespoke product-specific Operating Systems, Firmware and Software security controls and how to apply them. Knowledge of Quantum Cryptography & Quantum Key management. Experience or knowledge of existing threat intelligence sources. Knowledge of NATO security policy, risk management and Accreditation. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Mechanical Technical Engineer / Junior Design Manager North London and Northern Home Counties| Mechanical Building Services | Permanent £45,000 - £60,000 + package This is a role for someone who is ready to move beyond simply producing drawings or chasing information. You will be the person helping turn technical intent into information the project team can actually build from. Mechanical technical submissions, client comments, supplier queries, marked-up drawings, plant replacement strategies, maintenance schedules and design team coordination will all sit with you. The role needs someone mechanically biased, organised and confident enough to sit in weekly client DTM meetings, understand what is being discussed and make sensible decisions rather than just taking notes and passing everything upwards. You will be working across residential and commercial building services projects, supporting the technical and design management process from submission stage through to installation support. This would suit a Technical Engineer, Junior Design Manager, Mechanical Project Engineer, Mechanical Design Engineer or Technical Coordinator who wants more responsibility and more client-facing exposure. You do not need to be a fully established Design Manager. You do need to understand mechanical building services, read drawings properly, deal with suppliers, manage comments and issue information in line with a design programme. What you’ll do • You will generate mechanical technical submissions and manage them through the review process., • You will respond to client comments, amend submissions where required and make sure revised information is issued clearly and on time., • You will deal with suppliers on equipment queries, product information, technical compliance, schedules and project-specific requirements., • You will read and mark up mechanical drawings, identifying coordination issues, installation constraints, missing information and areas that need clarification., • You will generate plant replacement strategy documents, setting out how plant will be replaced, phased, accessed, isolated, installed and brought back into operation., • You will produce plant maintenance schedules and support the information needed for client review, O&M documentation and handover., • You will review AOV drawings and technical submissions, checking layouts, interfaces, compliance and coordination with the wider building services design., • You will work with residential and commercial sprinkler systems and understand the interfaces with fire alarm systems, controls and life safety requirements., • You will support technical coordination around wet risers, dry risers, AOVs, sprinkler systems, plant areas, risers, service routes and associated mechanical interfaces., • You will attend weekly client DTM meetings, contribute to discussions and make decisions where technical information needs to move forward., • You will provide installation guidance to the client’s design team, including architects, acousticians and other consultants., • You will identify priorities, chase information, close out comments and issue technical details in line with the design programme. What you’ll need • You will need a mechanical building services background, ideally across residential, commercial, mixed-use, refurbishment, plant replacement or technical services projects., • You should be comfortable producing, reviewing or managing mechanical technical submissions., • You will need to be able to read and mark up mechanical drawings with enough confidence to spot issues before they become site problems., • You should have a working understanding of plant replacement, maintenance schedules, AOVs, sprinkler systems, wet risers, dry risers and fire alarm interfaces., • You will need to be comfortable dealing directly with suppliers and asking the right questions around equipment selection, compliance, dimensions, access, maintenance and installation requirements., • You should be able to manage client comments, meeting actions, drawing mark-ups, revisions and technical queries without needing constant supervision., • You will need the confidence to attend client design team meetings and speak with architects, acousticians, consultants, suppliers and internal project teams., • A background as a Mechanical Project Engineer, Technical Engineer, Design Engineer, Technical Coordinator, Junior Design Manager or mechanically biased Building Services Engineer would all be relevant., • AutoCAD, Revit, Bluebeam, Navisworks, Microsoft Office, SharePoint, Aconex, Asite or similar systems would be useful, but the main requirement is strong mechanical understanding and good technical coordination. Why this role This is a good step for someone who wants to move towards design management while staying close to the technical detail. You will not just be sat in the background processing paperwork. You will be involved in the information that affects how the job is designed, coordinated, procured, installed, maintained and handed over. The bigger attraction is the progression. You will be coming into a role where the pathway is visible: Technical Engineer / Junior Design Manager, then Design Manager, with a long-term route towards Operations Director as part of the company’s succession planning. For someone with a mechanical building services background who wants more client contact, more decision-making and a genuine route into senior leadership, this is a strong move. Apply now or get in touch for a confidential conversation

JML are recruiting for a Technology Engineer for Roadside Technology. Reporting into the Assistant PM who reports into the PM MUST HAVE a background in installation or maintenance of electrical or electronic equipment, for example traffic lights On offer is: a salary of 31-40k + car Overtime available Variable shift pattern - Ad hoc weekends and nights Travel needed across the network Candidate will be subject to DBS checks Duties include: Carry out installation, maintenance, and commissioning works on a variety of Highways Roadside Technology Equipment, working with the Ringway team and specialist subcontractors. Ensure all safety, environmental, and quality obligations are met, while fulfilling the needs of clients and stakeholders. • Work safely and promote a safe environment for all operations and personnel. • Carry out installation, commissioning, and maintenance activities on all equipment. • Undertake software, hardware, and systems testing. • Adhere to Health and Safety procedures and produce required documentation. • Support the Assistant Project Manager with planning and delivery of projects/tasks. • Oversee operational teams and subcontractors on site to meet productivity and quality targets. Person Spec • Basic computer skills (Word, Excel, etc.). • Background in installation or maintenance of electrical/electronic equipment. • ONC/HNC or equivalent in Electronic/Electrical Engineering. • Previous registration/knowledge of HERS. • Willingness to work roadside and at heights. If you are interested in the Technology Engineer role then please apply and someone will be in touch

Connect2Luton are excited to recruit a Data Engineer on behalf of Luton Borough Council. Main purpose of position: As a senior data engineering specialist, the Data Engineer provides technical leadership for the design, build and operation of the council's data platforms and pipelines, ensuring they are secure, reliable, scalable and aligned to organisational priorities. The role leads the engineering of well-governed data products that integrate multiple data sources and make trusted data available for analytics, reporting and service decision-making. The postholder sets and assures engineering standards (e.g., data modelling, lineage, quality controls, testing and documentation) and works across teams-analysts, architects, engineers and service areas-to shape requirements, manage technical risk and ensure solutions are supportable in live operation. Operating with autonomy and influence at SFIA Level 6, the Data Engineer drives continuous improvement of the organisation's data engineering capability, mentors others, and contributes to the definition and delivery of the council's data platform roadmap, balancing pace of delivery with governance, security and value for money. You will be responsible to: Lead the design and evolution of data pipeline patterns, integration approaches and storage solutions, ensuring alignment with target architecture and platform strategy. Own delivery of complex, cross-domain data pipelines and data products, including technical planning, dependency management and operational readiness. Set and assure engineering standards for pipeline build (automation, testing, documentation and observability) so data flows are scalable, reliable and fit for analytical and operational use. Define and implement data quality management approaches (rules, validation, reconciliation and exception handling) and drive remediation with source-system owners where required. Establish monitoring, alerting and performance tuning practices for pipelines and platforms, including run-time observability and service level expectations. Lead investigation and resolution of high-impact data incidents and recurring problems, identifying root cause, reducing risk and improving resilience. Provide technical leadership for data and analytics initiatives, shaping solution options, estimating delivery, and advising on trade-offs (cost, risk, performance and time). Ensure solutions transition effectively into live operation through robust documentation, runbooks, support models and knowledge transfer. Contribute to delivery governance (e.g., technical assurance, risk management and progress reporting) to enable predictable, high-quality outcomes. Embed governance, security and data protection requirements into data platform and pipeline designs, working with information governance and security colleagues to ensure compliance. Implement and assure technical controls for access management, segregation of duties, encryption, retention and auditability, including support to DPIAs and audit requests where appropriate. Maintain clear data lineage and documentation to support transparency, accountability and safe reuse of data across the council.Skills and Experience: Significant experience working in a data engineering, data platform or analytics engineering role within a complex organisation Experience designing and building data pipelines and integrations from multiple source systems Experience working with structured and semi‑structured data to support reporting and analytics Proven experience resolving data quality, performance or reliability issues Experience contributing to the delivery of data or analytics projects Ability to analyse data requirements and translate them into effective technical solutions Good problem‑solving skills, able to diagnose and resolve complex data issues Ability to work independently on complex technical tasks while collaborating effectively with others Ability to prioritise work and manage competing demands in a delivery environment Relevant qualification in data, computing, IT or a related discipline, or equivalent practical experience, with a commitment to ongoing professional development in data engineering and analytics technologies Able to attend meetings and work at various locations as required Able to work outside normal office hours on occasion to meet service and project demands About Us Luton Borough Council have partnered with Kent County Council to create Connect2Luton, a recruitment managed service for all contingent temporary agency, contract, and interim roles at the Council. Our heritage and being local government owned which means we have a wealth of knowledge and expertise within the public sector, with many of our employees having previously worked for the Council or have supplied previously into the Council, for several years. We are an equal opportunities employment agency and business that positively encourages applications from all suitably qualified and eligible candidates. Connect2Luton is a trading style of Luton & Kent Commercial Services LLP - A joint venture between Luton Borough Council & Commercial Services Kent Ltd. Connect2Luton is an equal opportunities Employment Agency & Business. It positively encourages applications from all suitably qualified and eligible candidates

Agricultural Service Engineer Location: Luton Hours: Full-time, Monday to Friday (39 hours per week) with additional hours and weekend work during peak seasonal demand We are recruiting on behalf of a long-established, family-owned business for an Agricultural Service Engineer to join their Luton branch. This is a field and workshop-based role working on a premium range of agricultural machinery within a busy and well-supported service team. Key Responsibilities Service and maintain agricultural machinery including JCB Agriculture, Amazone, McHale, Lemken, Sumo and other leading brands Carry out repairs in line with manufacturer specifications to ensure reliability and safety Diagnose and rectify electrical, hydraulic, powertrain, and mechanical faults Use diagnostic software via laptop (training provided) Complete detailed service reports including photos, timesheets and documentation Identify additional repair opportunities and support service upselling where appropriate Maintain accurate records of work completed and machine condition Work with GPS, telematics and machine control systems Ensure demo and returned machines are inspected, complete and undamaged Carry out welding and fabrication when required Liaise with service departments and support operational planning Support preparation for shows, open days and events Attend manufacturer training when availableSkills & Experience Required Experience working with agricultural, plant or commercial vehicle machinery Strong diagnostic and fault-finding ability across mechanical, electrical and hydraulic systems Welding and fabrication skills desirable Good understanding of modern machine systems including GPS/telematics (advantageous) Ability to work independently and as part of a team Strong communication skills with a customer-focused approach Good time management and ability to work under pressure during peak periods Full UK driving licence required Relevant land-based engineering qualification preferred but not essentialWhat’s on Offer Company van provided Mobile phone, tablet and corporate clothing 24 days holiday plus bank holidays Company pension scheme (7% employer / 3% employee contribution) Life assurance Ongoing manufacturer training and development Overtime availableHow to Apply If you're an experienced engineer looking to join a reputable and long-established business working on high-quality agricultural machinery, apply now. Alternatively, contact David at Holt Recruitment on (phone number removed). Holt Recruitment are a leading recruitment agency specialising in Automotive, Motor Trade, Engineering, OEM, and related industries. We specialise in Plant, Agricultural, Powered Access, Forklift, Lift & Access, and Static Plant sectors. We recruit across the UK for roles including: Mobile Plant Engineer, Plant Fitter, Agricultural Engineer, Agricultural Mechanic, Powered Access Engineer, Forklift Engineer, MHE Engineer, and Generator Engineer. DH

Salary: up to £48,500 per annum plus company van and Veolia benefits Hours: 40 hours per week, Mon - Fri 8am to 4.30pm Location: Mobile across Hertfordshire When you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. Whether you're looking to overhaul the industry, or just do a good day's work, we know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture. What we can offer you: 25 days of annual leave Refer an Engineer to us once you've joined and earn £1000 Access to our company pension scheme Free physiotherapy and 24/7 GP service Discounts on everything from groceries to well known retailers Access to a range of resources to support your physical, mental, and financial health Ongoing training and development opportunities, allowing you to reach your full potential What you'll be doing: Execute planned maintenance work per Services Manager schedule, site policies/procedures, and during maintenance shutdowns as required. Troubleshoot and repair equipment faults as directed by site supervisors, supporting equipment reliability. Complete and maintain documentation/CMMS records, ensuring equipment data, spares, task lists, and man-hours are accurate and up to date (before/after tasks). Ensure safety and compliance by following site/Veolia EHS rules, conducting risk assessments, and adhering to statutory requirements. Review and improve maintenance procedures by keeping EWI/SOPs current, validating task steps, and refining PM content to remove non-value activities/duplication. Coordinate with others by liaising with subcontractors and participating in plant audits, including closing out resulting actions. Support performance and efficiency by reviewing maintenance KPI data (e.g., spares cost, paperwork, PM:CM ratio, man-hours, reliability trends), maximising wrench time through effective planning, and keeping tools/equipment in good condition. What we're looking for: City & Guilds Refrigeration and Air-conditioning (7189) or equivalent, with hands-on experience in a similar role Strong understanding of utilities systems, mechanical and electrical systems, P&ID/electrical drawings, and basic instrumentation Proficiency with Preventive Maintenance Systems, Computerised Maintenance Management Work Orders, and Permit to Work procedures Demonstrated expertise in diagnosing and repairing electrical systems with strong analytical and methodical approach to complex issues Computer literate with ability to understand and work within SOPs and technical documentation Team player with strong attention to detail, proactive attitude, and good initiative in approach to duties What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive

BS/MS/PhD in Computer Science, Aerospace Engineering, Electrical Engineering, Robotics, Mechanical Engineering, or a related field. Act as a subject matter expert for software engineering, representing software equities in a multi‑stakeholder environment including engineering, business and sales l

Rivian in London is seeking a Senior Engineer in Prediction, Planning, and Controls to join our Autonomy team. Lead end-to-end development of learning-based and hybrid planning systems for production-oriented autonomous driving, from data and model development to in-vehicle validation.

Industrial Planning & Sequencing. Ensure Line Balancing is embedded from initial planning through to industrial execution. Assess the industrial impact of design or engineering changes.

Seeking a Senior Planning Engineer for a UK main contractor in Leeds, responsible for developing and managing project programs at tender and contract stages.

Become a food delivery driver with Deliveroo and find work that suits you.Make money on your own schedule with your own vehicle (scooter, bike or car).Work when you want to, at the tap of a button.Scooter, bike or car (with license and insurance).Smartphone with iOS 12 / Android 6 or above.Proof of

Support Worker (Learn Dis) REF: HSCP/.Salary: Grade 3 £27,992 - £28,610 �

The salary advertised is full time (35 hours per week, 52 weeks per year).Part-time hours / sessional posts will be pro-rated accordingly.This is a 52-week non-sessional post i.You will be asked to indicate which post(s) you would like to be considered for when you complete the application form.To a

Project Manager / Senior Site Manager.Livingston / Projects across Scotland.We are currently working with a well-established construction contractor who are looking to appoint an experienced.The successful candidate will be responsible for managing construction projects from commencement through to

JOIN EVRI PREMIUM, A NETWORK OF DHL E-COMMERCE THIS SUMMER.Evri Premium, a network of DHL E-Commerce is building a next-generation delivery network and we’re looking for motivated drivers.Whether you already have a suitable van or not, make the most of the brighter, longer summer days ahead wi

Fujitsu UK is seeking a UK Head of Quantum to establish and lead a new UK quantum capability, reporting to the UK CTO within the Technology Group.This role will translate Fujitsu’s global quantum strength into market-ready services and client outcomes.You will build the team, governance, and deliv

JOIN EVRI PREMIUM, A NETWORK OF DHL E-COMMERCE THIS SUMMER.Evri Premium, a network of DHL E-Commerce is building a next-generation delivery network and we’re looking for motivated drivers.Whether you already have a suitable van or not, make the most of the brighter, longer summer days ahead wi

Ogilvy UK is seeking a Creative Director with a strong art direction background to lead creative work on our health portfolio.You will balance hands-on leadership with team development to deliver big, effective ideas that meet client and patient needs.You will mentor art directors, designers and cop

Manage end-to-end project execution including planning, governance, risk management, resource coordination, executive reporting, and client communications. Together, we harness engineering excellence and passion to co-create meaningful solutions to complex challenges. Job descriptionLead PLM strateg

Team leading experience would be beneficial, as this role involves a blend of both engineering and leading engineers to deliver to projects. Experience of IBM Engineering Work Management / Rational Tool Concert tool. Proven ability to communicate effectively with multiple stakeholders, including SME

Veeva Systems is seeking a senior events leader to head Europe’s corporate events program.You will partner with marketing, sales, strategy, and product to plan and execute large customer conferences, internal field kickoffs, and special programs across Europe.You will hire and mentor a team, manag

Team leading experience would be beneficial, as this role involves a blend of both engineering and leading engineers to deliver to projects. The Software Team Leader will be responsible for leading a team of software engineers in the delivery of high-quality software solutions. Project Planning and

It is a technical field, developed by engineering design choices, location‑specific resources and increasingly sophisticated financing and market structures.

Team leading experience would be beneficial, as this role involves a blend of both engineering and leading engineers to deliver to projects. Team Leader focussed & strong communication skills (Conversing & working with Software Project Lead, Senior management & Engineers within other departments). J

As you learn your regular round, use the route planning software and build relationships with customers, you can become more efficient, complete more deliveries and increase your earning opportunity.

Responsibilities will include: Providing day-to-day care and emotional support to young people with complex needs Supporting children to manage behaviour positively and develop coping strategies Leading shifts, offering guidance to staff, and ensuring routines and care plans are followed Contributin

As you learn your regular round, use the route planning software and build relationships with customers, you can become more efficient, complete more deliveries and increase your earning opportunity.

A good understanding of care planning processes Be experienced in or happy to undertake training on administering medication Above all, have a natural ability to help make the lives of others more fulfilling.

Experienced Proejct Manager with experience on large facade projects required to oversee the following: Stevenage - Immediate Contract Value - £20m Replacement faade Render, terracotta, and rain screen Project Duration 2 years starts beginning of September.All usual PM duties apply and the candi

Performance Objectives Assist in the delivery of construction projects from inception through to completion across all RIBA stages Support Senior Project Managers with project planning, programming, reporting and client updates * Coordinate consultants, contractors and design teams throughout

Junior Project Manager Construction | Hertfordshire Up to £40,000 plus annual bonus Build Your Career in Passive Fire Protection Were looking for a Junior Project Manager to support the delivery of commercial construction projects in the specialist field of Passive Fire Protection, ranging from £1

They are now seeking a Project Manager to oversee the planning and execution of projects across their portfolio. The role covers planning, design coordination (with the design team), execution and monitoring of all project stages.

Finance Team Leader ?? Luton | Hybrid Working ?? £33,000 - £35,000 + Excellent Benefits I'm currently recruiting for a Finance Team Leader to join a well-established Housing Association based in Luton.This is a fantastic opportunity for an experienced finance professional looking to combine

Key Responsibilities: * Lead the planning and delivery of a Microsoft Fabric / Power BI data platform, ensuring scope, timelines, budget and quality are controlled through to completion. Zoho) to Salesforce data migration including data mapping, cleansing, migration planning, cutover approach, reco