Mechanical supervisor jobs in BridgwaterCreate job alerts

CNC Turner | CNC Setter Operator | Manual Lathe Machinist | CNC Machinist\n Permanent | £32,000 per annum + Two Bonus Schemes | Early Friday Finish | Rotating Shifts Introduction\n Acorn by Synergie is recruiting for an experienced CNC Turner, CNC Setter Operator, Manual Lathe Machinist or CNC Machinist to join a well-established engineering and manufacturing business on a permanent basis. \n This is an excellent opportunity for an experienced CNC machining professional with CNC turning, machine setting and manual lathe experience to join a stable employer offering an excellent salary, bonus schemes, early Friday finishes and a comprehensive benefits package. \n Reporting to the Shift Supervisor, you will be responsible for setting, operating and monitoring CNC turning machines while maintaining the highest standards of quality, safety and productivity. Key Duties\n\n • \n Set up and operate CNC turning machines to manufacture precision engineered components. \n • \n Produce components from job cards, engineering drawings and production specifications. \n • \n Read and interpret engineering drawings, including tool cutting points and TNR compensation. \n • \n Read, edit and adjust CNC programmes where required. \n • \n Select, install and set the correct tooling for each production run. \n • \n Carry out first-off inspections and make machine adjustments where necessary. \n • \n Measure finished components using mechanical and optical measuring equipment to ensure tolerances are met. \n • \n Complete batch inspections in accordance with Standard Operating Procedures (SOPs). \n • \n Identify and remove non-conforming parts from production. \n • \n Operate multiple CNC machines as production demands require. \n • \n Record production activity using barcode scanning for full traceability. \n • \n Maintain high housekeeping standards and prepare machines for the next production run. \n • \n Follow all Health & Safety procedures and wear appropriate PPE at all times. \nRequirements\n\n • \n Previous experience as a CNC Turner, CNC Setter Operator, Manual Lathe Machinist, CNC Machinist or similar engineering role. \n • \n Experience setting and operating CNC turning machines is essential. \n • \n Manual turning and lathe machining experience is essential. \n • \n Knowledge of Fanuc controls or Okuma machines would be advantageous. \n • \n Experience working within an engineering or precision manufacturing environment. \n • \n Ability to read and interpret engineering and manufacturing drawings. \n • \n Strong attention to detail with the ability to manufacture components to tight tolerances. \n • \n Good organisational and time management skills. \n • \n Flexible approach with the ability to work across multiple machines and production areas. \n • \n Strong commitment to quality, continuous improvement and workplace safety. \nHours\n Rotating shift pattern: \n\n • \n Week 1: 6:00am - 2:00pm \n • \n Week 2: 2:00pm - 10:00pm \n • \n Early finish every Friday \nWhat We Offer\n\n • \n £32,000 per annum. \n • \n Two bonus schemes. \n • \n Early finish every Friday. \n • \n Excellent benefits package. \n • \n Permanent, full-time employment. \n • \n Long-term career opportunities within a successful engineering manufacturer. \nInterested?\n If you're an experienced CNC Turner, CNC Setter Operator, Manual Lathe Machinist, CNC Machinist or Engineering Machine Operator looking for your next permanent opportunity, apply today with your up-to-date CV. \n Acorn by Synergie acts as an employment agency for permanent recruitment.

CNC Turner | CNC Setter Operator | Manual Lathe Machinist | CNC MachinistPermanent | £32,000 per annum + Two Bonus Schemes | Early Friday Finish | Rotating ShiftsIntroductionAcorn by Synergie is recruiting for an experienced CNC Turner , CNC Setter Operator , Manual Lathe Machinist or CNC Machinist to join a well-established engineering and manufacturing business on a permanent basis.This is an excellent opportunity for an experienced CNC machining professional with CNC turning, machine setting and manual lathe experience to join a stable employer offering an excellent salary, bonus schemes, early Friday finishes and a comprehensive benefits package.Reporting to the Shift Supervisor, you will be responsible for setting, operating and monitoring CNC turning machines while maintaining the highest standards of quality, safety and productivity.Key DutiesSet up and operate CNC turning machines to manufacture precision engineered components.Produce components from job cards, engineering drawings and production specifications.Read and interpret engineering drawings, including tool cutting points and TNR compensation.Read, edit and adjust CNC programmes where required.Select, install and set the correct tooling for each production run.Carry out first-off inspections and make machine adjustments where necessary.Measure finished components using mechanical and optical measuring equipment to ensure tolerances are met.Complete batch inspections in accordance with Standard Operating Procedures (SOPs).Identify and remove non-conforming parts from production.Operate multiple CNC machines as production demands require.Record production activity using barcode scanning for full traceability.Maintain high housekeeping standards and prepare machines for the next production run.Follow all Health & Safety procedures and wear appropriate PPE at all times.RequirementsPrevious experience as a CNC Turner , CNC Setter Operator , Manual Lathe Machinist , CNC Machinist or similar engineering role.Experience setting and operating CNC turning machines is essential.Manual turning and lathe machining experience is essential.Knowledge of Fanuc controls or Okuma machines would be advantageous.Experience working within an engineering or precision manufacturing environment.Ability to read and interpret engineering and manufacturing drawings.Strong attention to detail with the ability to manufacture components to tight tolerances.Good organisational and time management skills.Flexible approach with the ability to work across multiple machines and production areas.Strong commitment to quality, continuous improvement and workplace safety.HoursRotating shift pattern:Week 1: 6:00am - 2:00pmWeek 2: 2:00pm - 10:00pmEarly finish every FridayWhat We Offer£32,000 per annum.Two bonus schemes.Early finish every Friday.Excellent benefits package.Permanent, full-time employment.Long-term career opportunities within a successful engineering manufacturer.Interested?If you're an experienced CNC Turner , CNC Setter Operator , Manual Lathe Machinist , CNC Machinist or Engineering Machine Operator looking for your next permanent opportunity, apply today with your up-to-date CV.Acorn by Synergie acts as an employment agency for permanent recruitment.TPBN1_UKTJ

Job Title: Welding Field Engineer - SurveillanceLocation: Hinkley Point C, SomersetPosition: ContractDuration: Ongoing (December to December)Rate: Up to £350/day PAYE + 36 days annual leave or up to £475.72/day UmbrellaPlay Your Part in Building the Future of UK EnergyHinkley Point C is one of Europe's largest and most complex infrastructure projects - a multi-billion-pound nuclear new build that will provide low-carbon electricity to around six million UK homes.We are looking for an experienced Welding & NDT Field Engineer to join the Construction Surveillance team at Hinkley Point C.For this position, we're particularly interested in people who understand welding from both sides of the process.You'll need to be a CSWIP 3.2 qualified Welding Inspector with strong NDT knowledge and experience , but we're not looking for someone whose experience has been limited to inspection.You must have previous hands-on welding experience.Whether you started your career as a coded welder, pipe welder or fabricator/welder before progressing into inspection, NDT or quality surveillance, we're looking for someone who genuinely understands how welding is performed in the field.The RoleAs a Field Engineer, you'll provide independent construction and quality surveillance across welding, fabrication and mechanical installation activities on the Hinkley Point C site.You'll form part of the site Construction Surveillance team, supporting the delivery of NEC Supervisor duties and ensuring works are completed in accordance with contractual, engineering and quality requirements.This is a field-based position requiring someone comfortable getting out onto site, assessing the work being performed and challenging quality issues where necessary.You'll undertake continuous, notified and planned surveillance of contractor activities, identifying potential problems before they impact construction and ensuring appropriate inspection records are in place before works progress.What You'll Be DoingYour responsibilities will include:Carrying out welding, fabrication and NDT surveillance across site.Monitoring contractor activities against approved Quality Control Plans and inspection requirements.Verifying works are constructed in accordance with the contract, drawings and applicable standards.Reviewing welding activities, processes and workmanship in the field.Witnessing and reviewing NDT activities including UT, MT/MPI and PT/DPI .Reviewing Quality Inspection Records before works are covered or progressed.Identifying potential non-conformances and supporting the NCR process.Proactively identifying quality issues and supporting appropriate corrective or mitigating action.Working closely with construction, engineering, quality and contractor teams.Maintaining accurate and concise surveillance records.Reviewing contractor performance against authorised Quality Control Plans.Ensuring engineering or design decisions identified in the field are progressed through the appropriate formal process.Supporting the continued development of a strong Nuclear Safety and Quality Culture across the project.Essential RequirementsCSWIP 3.2 Welding Inspector qualification.Previous hands-on welding experience - this is a key requirement for the position.Strong practical understanding of welding processes, techniques, defects and acceptance requirements.Demonstrable experience of Non-Destructive Testing (NDT).Experience with NDT techniques including Ultrasonic Testing (UT), Magnetic Particle Testing (MT/MPI) and/or Penetrant Testing (PT/DPI).Significant welding inspection, fabrication inspection or quality surveillance experience.Experience working within large-scale construction, engineering or industrial environments.Ability to independently carry out welding and NDT surveillance in the field.Strong understanding of construction drawings, inspection requirements, Quality Control Plans and Quality Inspection Records.Ability to identify quality issues and challenge contractor activities appropriately.Strong written and verbal communication skills.Confident working with digital systems and electronic inspection/surveillance recordsDesirable ExperienceExperience within highly regulated or safety-critical sectors would be particularly valuable, including:NuclearOil & GasPetrochemicalPower GenerationEnergy from WasteChemical ProcessingPharmaceuticalHeavy Industrial ConstructionExperience inspecting piping, pressure systems, mechanical equipment or safety-critical fabrication would also be highly advantageous.?? Apply today or contact Jordan Steele on 0161 926 1735 / to learn more.Good Luck!This vacancy is being advertised by Rullion Ltd acting as an employment business.Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.TPBN1_UKTJ

Supervision \n\n • Supervise mechanical personnel and subcontractors carrying out installation, maintenance, testing, and repair activities.\n, • Ensure work is performed in accordance with approved work packs, engineering drawings, method statements, permits to work, and risk assessments.\n, • Coordinate daily work activities to achieve project and maintenance objectives.\n, • Conduct daily briefings, toolbox talks, and safety meetings.\n, • Monitor work progress, productivity, and quality, taking corrective action where necessary.\n, • Stop work immediately where unsafe conditions, procedural violations, or quality concerns are identified.\n\n

Electrical Supervisor - £19.00 to £20.50 per hour, depending on experience BridgwaterDo you have strong electrical installation, testing and fault-finding experience? Are you ready to take more ownership on site while joining a friendly team where your work will genuinely be valued?The roleWe are looking for an experienced Electrical Supervisor to join a well-established and supportive business working across the M5 corridor, from Bristol to Exeter.This is a hands-on role where no two days are likely to feel the same. You will work on a range of projects within the water industry, supervising and completing electrical installation and maintenance work on site.Projects will involve instrumentation, control panels, power circuits, lighting circuits and containment systems. You will have the freedom to work independently while still being part of a close-knit team that supports one another and takes pride in delivering quality work.Key ResponsibilitiesYour day-to-day duties will include:Supervising electrical work and supporting site teamsCompleting electrical installation and maintenance workInstalling control panels, instrumentation and containment systemsInstalling power and lighting circuitsTesting, fault finding and repairing electrical equipmentWorking on both new and existing assetsCarrying out general maintenance inspectionsEnsuring work is completed safely and to a high standardCommunicating with clients, contractors and colleagues on siteAbout our companyYou will be joining an established business with more than 30 years of experience delivering specialist electrical and engineering services. The company provides Mechanical, Electrical, Instrumentation, Control and Automation services to a range of blue-chip clients.The Benefits45-hour working weekFull door-to-door travel time paidTime and a quarter after 47.5 hoursTime and a half after 50 hours and on SaturdaysDouble time on Sundays25 days holiday plus eight bank holidays ( rising with long service)Holiday entitlement increasing with long serviceSickness allowanceCompany vehicle and fuel cardOngoing training and career progressionThe personYou will need:A valid ECS cardSSSTS certificationA full UK driving licenceElectrical installation, testing and fault-finding experienceThe confidence to supervise work and make decisions on siteThe ability to work independently and as part of a teamA practical, reliable and safety-focused approachIdeally, a home location between Bristol and ExeterWhats nextApply today and take the next step with a business that will recognise your experience, support your development and value the work you do.TPBN1_UKTJ

Job Title: Temporary Works Supervisor (Mechanical / Scaffolding).Location: Hinkley Point C, Taunton.Pay: PAYE £375 or Umbrella £500 (inside IR35).Working Pattern: 10 - 4 rotation.We are looking for a TWS for a Mechanical / Scaffolding scope of works.The Temporary Works Supervisor (TWS) is responsi

Job Title: Field Engineer Mechanical Location: Hinkley Point C, Somerset Pay: PAYE £327.95 or Umbrella £458.81 Job ID: 2100 Job Purpose / Overview The NNB Surveillance Field Engineer will take responsibility for activities in the field relating to Construction Surveillance. They will form part of a team with the primary role to deliver the NEC Supervisor duties described in the NEC contract and ensure that HPC Quality needs, targets and expectations are realised. • Broad knowledge and wide understanding of the Engineering Construction industry, materials, trades methods and legal requirements, • Excellent organisation, delegation, and communication skills. Ability to work within a high performing team that continuously outperforms expectations and objectives, • Proven experience of writing diaries which are accurate, concise and with relevance to the particular form of contract, • Proven track record of working within a large construction team, • A minimum of HND in a Mechanical Engineering qualification or equivalent vocational training and experience, • experience of Mechanical infrastructures such as Vessels, tanks, liners and pipework, • Good attention to detail when checking work and materials, • Able to establish appropriate working relationships with the contractors, • Excellent organisation, delegation and communication skills. Ability to work within a high performing team that continuously outperforms expectations and objectives, • Proven experience of writing diaries which are accurate, concise and with relevance to the particular form of contract, • Proven track record of working within a large construction team, • A minimum of HND in a Civil/ Mechanical/ Electrical Engineering qualification or equivalent vocational training and experience, • Good attention to detail when checking work and materials, • Able to establish appropriate working relationships with the contractors, • Persuasive and diplomatic whilst remaining independent Desirable • Experience in the installation and erection of large Civil Works and Mechanical or Electrical plant, • General understanding of the posts obligations under CDM Regulations - along with an understanding of the document and drawing approvals processes, • Strong communication skills in English is required, and knowledge of French can be an advantage, • Experience in the use of electronic hand held devices to capture information They will be required to attend and pass the HPC Clerk of Works course as part of our upskilling training programme. JBRP1_UKTJ

Job Title: Field Engineer Welding Location: Hinkley Point C, Somerset Pay: PAYE £327.95 or Umbrella £458.81 Job ID: 2100 Job Purpose / Overview The NNB Surveillance Field Engineer will take responsibility for activities in the field relating to Construction Surveillance. They will form part of a team with the primary role to deliver the NEC Supervisor duties described in the NEC contract and ensure that HPC Quality needs, targets and expectations are realised. • Broad knowledge and wide understanding of the Engineering Construction industry, materials, trades methods and legal requirements, • Excellent organisation, delegation, and communication skills. Ability to work within a high performing team that continuously outperforms expectations and objectives, • Proven experience of writing diaries which are accurate, concise and with relevance to the particular form of contract, • Proven track record of working within a large construction team, • A minimum of HND in a Civil/ Mechanical/ Electrical Engineering qualification or equivalent vocational training and experience, • Welding and NDT qualifications, CSWIP 3.1 / PCN Welding Inspector as a minimum. UT, PAUT, MT, PT + Others, all very desirable., • Good attention to detail when checking work and materials, • Able to establish appropriate working relationships with the contractors, • Excellent organisation, delegation and communication skills. Ability to work within a high performing team that continuously outperforms expectations and objectives, • Proven experience of writing diaries which are accurate, concise and with relevance to the particular form of contract, • Proven track record of working within a large construction team, • A minimum of HND in a Civil/ Mechanical/ Electrical Engineering qualification or equivalent vocational training and experience, • Good attention to detail when checking work and materials, • Able to establish appropriate working relationships with the contractors, • Persuasive and diplomatic whilst remaining independent Desirable • Experience in the installation and erection of large Civil Works and Mechanical or Electrical plant, • General understanding of the posts obligations under CDM Regulations - along with an understanding of the document and drawing approvals processes, • Strong communication skills in English is required, and knowledge of French can be an advantage, • Experience in the use of electronic hand held devices to capture information They will be required to attend and pass the HPC Clerk of Works course as part of our upskilling training programme. JBRP1_UKTJ

Job Title: Welding Field Engineer - Surveillance Location: Hinkley Point C, Somerset Position: Contract Duration: Ongoing (December to December) Rate: Up to £350/day PAYE + 36 days annual leave or up to £475.72/day Umbrella Play Your Part in Building the Future of UK Energy Hinkley Point C is one of Europe's largest and most complex infrastructure projects - a multi-billion-pound nuclear new build that will provide low-carbon electricity to around six million UK homes. We are looking for an experienced Welding & NDT Field Engineer to join the Construction Surveillance team at Hinkley Point C. For this position, we're particularly interested in people who understand welding from both sides of the process. You'll need to be a CSWIP 3.2 qualified Welding Inspector with strong NDT knowledge and experience, but we're not looking for someone whose experience has been limited to inspection. You must have previous hands-on welding experience. Whether you started your career as a coded welder, pipe welder or fabricator/welder before progressing into inspection, NDT or quality surveillance, we're looking for someone who genuinely understands how welding is performed in the field. The Role As a Field Engineer, you'll provide independent construction and quality surveillance across welding, fabrication and mechanical installation activities on the Hinkley Point C site. You'll form part of the site Construction Surveillance team, supporting the delivery of NEC Supervisor duties and ensuring works are completed in accordance with contractual, engineering and quality requirements. This is a field-based position requiring someone comfortable getting out onto site, assessing the work being performed and challenging quality issues where necessary. You'll undertake continuous, notified and planned surveillance of contractor activities, identifying potential problems before they impact construction and ensuring appropriate inspection records are in place before works progress. What You'll Be Doing Your responsibilities will include: Carrying out welding, fabrication and NDT surveillance across site. Monitoring contractor activities against approved Quality Control Plans and inspection requirements. Verifying works are constructed in accordance with the contract, drawings and applicable standards. Reviewing welding activities, processes and workmanship in the field. Witnessing and reviewing NDT activities including UT, MT/MPI and PT/DPI. Reviewing Quality Inspection Records before works are covered or progressed. Identifying potential non-conformances and supporting the NCR process. Proactively identifying quality issues and supporting appropriate corrective or mitigating action. Working closely with construction, engineering, quality and contractor teams. Maintaining accurate and concise surveillance records. Reviewing contractor performance against authorised Quality Control Plans. Ensuring engineering or design decisions identified in the field are progressed through the appropriate formal process. Supporting the continued development of a strong Nuclear Safety and Quality Culture across the project. Essential Requirements CSWIP 3.2 Welding Inspector qualification. Previous hands-on welding experience - this is a key requirement for the position. Strong practical understanding of welding processes, techniques, defects and acceptance requirements. Demonstrable experience of Non-Destructive Testing (NDT). Experience with NDT techniques including Ultrasonic Testing (UT), Magnetic Particle Testing (MT/MPI) and/or Penetrant Testing (PT/DPI). Significant welding inspection, fabrication inspection or quality surveillance experience. Experience working within large-scale construction, engineering or industrial environments. Ability to independently carry out welding and NDT surveillance in the field. Strong understanding of construction drawings, inspection requirements, Quality Control Plans and Quality Inspection Records. Ability to identify quality issues and challenge contractor activities appropriately. Strong written and verbal communication skills. Confident working with digital systems and electronic inspection/surveillance records Desirable Experience Experience within highly regulated or safety-critical sectors would be particularly valuable, including: Nuclear Oil & Gas Petrochemical Power Generation Energy from Waste Chemical Processing Pharmaceutical Heavy Industrial ConstructionExperience inspecting piping, pressure systems, mechanical equipment or safety-critical fabrication would also be highly advantageous. Apply today or contact Jordan Steele on (phone number removed) / to learn more. Good Luck! This vacancy is being advertised by Rullion Ltd acting as an employment business. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

Electrical Supervisor - £19.00 to £20.50 per hour, depending on experience – Bridgwater Do you have strong electrical installation, testing and fault-finding experience? Are you ready to take more ownership on site while joining a friendly team where your work will genuinely be valued? The role We are looking for an experienced Electrical Supervisor to join a well-established and supportive business working across the M5 corridor, from Bristol to Exeter. This is a hands-on role where no two days are likely to feel the same. You will work on a range of projects within the water industry, supervising and completing electrical installation and maintenance work on site. Projects will involve instrumentation, control panels, power circuits, lighting circuits and containment systems. You will have the freedom to work independently while still being part of a close-knit team that supports one another and takes pride in delivering quality work. Key Responsibilities Your day-to-day duties will include: Supervising electrical work and supporting site teams Completing electrical installation and maintenance work Installing control panels, instrumentation and containment systems Installing power and lighting circuits Testing, fault finding and repairing electrical equipment Working on both new and existing assets Carrying out general maintenance inspections Ensuring work is completed safely and to a high standard Communicating with clients, contractors and colleagues on siteAbout our company You will be joining an established business with more than 30 years of experience delivering specialist electrical and engineering services. The company provides Mechanical, Electrical, Instrumentation, Control and Automation services to a range of blue-chip clients. The Benefits 45-hour working week Full door-to-door travel time paid Time and a quarter after 47.5 hours Time and a half after 50 hours and on Saturdays Double time on Sundays 25 days’ holiday plus eight bank holidays ( rising with long service) Holiday entitlement increasing with long service Sickness allowance Company vehicle and fuel card Ongoing training and career progressionThe person You will need: A valid ECS card SSSTS certification A full UK driving licence Electrical installation, testing and fault-finding experience The confidence to supervise work and make decisions on site The ability to work independently and as part of a team A practical, reliable and safety-focused approach Ideally, a home location between Bristol and ExeterWhat’s next Apply today and take the next step with a business that will recognise your experience, support your development and value the work you do