Trabajos hiring en BedfordCrear alertas

Position Summary:Leidos is seeking a highly qualified Avionics Engineering Support professional to provide engineering and technical support for Hybrid SATCOM systems supporting defense and government aviation programs. The selected candidate will support the integration, testing, sustainment, and modernization of airborne satellite communication and avionics systems across multiple aircraft platforms operating within commercial and military communication environments. This position supports mission-critical Hybrid SATCOM capabilities that enable secure, resilient, and reliable airborne communications for operational missions worldwide. The candidate will work closely with cross-functional engineering teams to integrate SATCOM, RF, avionics, networking, and mission systems while supporting system performance, interoperability, and operational readiness requirements.This role works independently to achieve day-to-day objectives with significant impact on operational results and project deliverables. Responsibilities include analyzing complex technical issues, developing and implementing avionics solutions, and collaborating with internal subject matter experts to resolve challenges affecting system performance and integration. The Avionics Engineering Support professional is also expected to provide technical guidance, coaching, and work review for junior engineering staff while applying deep technical expertise and analytical skills to deliver effective and innovative solutions.The ideal candidate will possess experience with avionics systems integration, airborne communications, SATCOM technologies, aircraft modification activities, and engineering support within complex aerospace environments.Key Responsibilities:Support the integration, testing, and sustainment of airborne Hybrid SATCOM and avionics systems across multiple aircraft platforms.Assist with integration of SATCOM terminals, RF communication systems, antennas, avionics interfaces, mission equipment, and aircraft network systems.Perform troubleshooting, root cause analysis, and corrective action support for avionics, SATCOM, RF, and airborne communication system issues.Develop and maintain engineering documentation including interface control documents, installation packages, wiring diagrams, test procedures, and technical reports.Support laboratory, ground, and flight testing activities to verify Hybrid SATCOM system performance, interoperability, and operational readiness.Coordinate with systems, electrical, RF, software, and network engineering teams to support end-to-end airborne communication system integration.Ensure compliance with aviation, cybersecurity, airworthiness, and engineering standards associated with airborne SATCOM and avionics systems.Analyze system performance data and provide engineering recommendations to improve communication reliability, system availability, and mission effectiveness.Participate in technical reviews, customer meetings, and program briefings to communicate technical status, risks, and engineering solutions.Support configuration management, requirements traceability, and engineering change activities throughout the Hybrid SATCOM system lifecycle.Required Qualifications:Bachelor’s degree with 4+ years of prior relevant experience or Master’s degree with 2+ years of prior relvant experience.Experience with airborne communication systems integration, avionics troubleshooting, verification and validation, and technical documentation development.Knowledge of Hybrid SATCOM architectures, RF communication systems, avionics interfaces, aircraft integration processes, and mission communication systems.Active Secret security clearance or ability to obtain and maintain a Secret clearanceExcellent communication and collaboration skills with a geographically dispersed teamPreferred Qualifications:5+ years of experience supporting avionics systems, airborne communications, SATCOM integration, or aerospace engineering programs.Experience supporting DoD, military aviation, airborne ISR, or tactical communication programs involving SATCOM capabilities.Knowledge of FAA, MIL-STD, RTCA/DO-160, airworthiness certification, and electromagnetic compatibility requirements.Experience supporting flight testing, aircraft modification programs, antenna integration, and airborne network communication systems.Familiarity with secure communication systems, tactical data links, and military SATCOM operations.Professional certifications related to avionics, aerospace systems, systems engineering, networking, or cybersecurity.AMSOPP1If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares.Original Posting:May 14, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $87,100.00 - $157,450.00The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.SummaryLocation: Bedford, MAType: Full time

You can make a difference, be rewarded, and join our impact-driven community now - at Targeted Provision we change lives! Multiple positions are available, hiring is ongoing, and interviews are being arranged as applications come in. We will contact you with nearby tutoring work within 45 minutes drive of the advertised location and/or within 45 minutes of the postcode you provide us. We are working with Schools and Local Authorities in your area and are looking for Core Subject (Maths, English, or Science) SEND Tutors and Teachers like you to transform the lives of Young People with SEND and SEMH needs in your community! We are looking for SEND Tutors and Teachers with a genuine passion for transforming the lives of disengaged, at-risk, and vulnerable learners – take control of your teaching journey with us and work flexibly, creatively, and in a trauma-informed way to make a difference in your own life and the lives of the young people we support. • Competitive pay: £28 - £35 per hour, • Flexible working: In person, hybrid, and work from home teaching opportunities, • Flexible hours: Flexible part-time up to full-time hours to suit your schedule, • CPD and employee mentoring: TES CPD suite and professional mentor access, • SEND Support Team: Support to keep a team around you and the child, • Community and Company Events: Knowledge sharing and resources, • Referral Programme: Get rewarded for successful tutor referrals, • A Role with Purpose: Join a child-centred company committed to reimagining the world of support for vulnerable young people for the better, • Experience: 2+ years teaching experience, ideally working with SEND, SEMH, MLD, SLD, and/or PMLD in a holistic and trauma-informed way, • Subjects: Familiarity teaching English, Maths, and/or Science, • Qualifications: Qualified Teacher Status (QTS / QTLS), • Compliance: Enhanced DBS (we can facilitate this if needed) and 2+ professional references, • Location: You must be based in the UK with the right to work in the UK, even for remote / online jobs, • Safeguarding: Knowledge of safeguarding and creating a safe learning environment, • Provide in person, online / remote, and hybridMaths, English, or Science tuition to children, teenagers, and young people with SEMH and SEND needs, including MLD, SLD, PMLD, and other Additional Educational Needs, • Support pupils and students, ranging from KS1 - KS5 (as appropriate for your skills), referred by local authorities and schools by planning and delivering flexible, trauma-informed tutoring and mentoring, • Plan and report for lessons and provide regular feedback on student progress, • We are on a mission to raise the standard of education provided to young people with SEND (Special Education Needs and Disabilities), as well as other needs such as SEMH needs (Social, Emotional and Mental Health). We are increasingly supporting children and young people with MLD (Moderate Learning Difficulties), SLD (Severe Learning Difficulties), and PMLD (Profound and Multiple Learning Difficulties). We want you as part of our mission!, • Apply in less than 5 minutes via our mobile and browser optimised application form, • Interviews are being scheduled on a rolling basis - apply now and start making a difference!, • We welcome tutors from all backgrounds - our learners come from diverse communities and our organisation must reflect and represent their experiences, • We take Safer Recruitment seriously. All candidates must pass through our safer recruitment process to ensure their suitability to work with children and young people, • This position involves engaging with us on a self-employed basis, as and when opportunities arise Individuals with highly relevant experience from teaching background often have worked in the following roles: • SENDCo (Special Education Needs Coordinator), • SLD / MLD Teacher, • Autism / ADHD Support Teacher, • Intervention Specialist / Teacher / Tutor, • Ex-Teacher Other highly relevant roles from therapeutic and learning support background include: • Learning Support Assistant (LSA) / Teaching Assistant (TA), • Educational Therapist, • Speech and Language Therapist (SALT), • Educational Psychologist (EP), • Inclusion Coordinator If you hold one of these roles, meet our requirements, and are considering a career change please do consider applying with us. Due to the number of applications we receive, we are unable to respond to every applicant. We aim to respond to all successful applicants.

The RoleThe AI revolution is reshaping the digital landscape, and Vertiv is helping power what's next. As a global leader in critical digital infrastructure, we bring together power, cooling, IT, and services to support the world's most demanding applications.This is marketing where it matters most, in the field, face-to-face, and directly tied to revenue. As our EMEA Field Marketing Specialist at Vertiv, a Fortune 500 company headquartered in the US with EMEA revenue doubling year over year, you'll be the engine behind event delivery, PR coordination and narrative, lead management, and brand-perfect execution across Northern Europe.You won't just plan marketing; you'll make it happen. From packed trade show floor to the precision of a perfectly routed leads to sales. You will owe the execution that turns marketing activity into measurable pipeline. You'll be the trusted day-to-day marketing partner for field sales teams, navigating complex stakeholder landscapes both face-to-face and through remote connections to ensure every activation, campaign, and touchpoint is delivered with the quality and consistency that builds real commercial momentum.Location & Working ArrangementThis is a remote role; however, you will be travelling regularly (up to 3 months per year) within the UK, Ireland, and the Nordics. You will also be expected to attend face-to-face meetings at our London or Southampton offices on a regular basis.What You'll OwnPR, Narrative & CommunicationsShape and amplify Vertiv's regional narrative through coordinated PR activity, thought leadership placement, and media engagement. Working alongside the PR Agencies and EMEA PR team to ensure consistent messaging across earned, owned, and paid channels, Coordinate content reviews and approvals with internal stakeholders to ensure accuracy, compliance, and alignment before publication, working closely with subject matter experts, portfolio teams, creating compelling content across a range of formats, including case studies, customer stories, videos, advertising, landing papers and digital campaign assets.Event Execution & Lead ConversionRun the full operational playbook for marketing events, trade shows, and field activations end-to-end. Then own the critical handoff, ensuring every lead is accurately captured, CRM-routed, qualified, and delivered to Sales with zero pipeline leakage. Go beyond attendance numbers by analysing engagement depth, lead quality, and conversion potential to prove what's actually working.Revenue PODs & Pipeline ContributionWork closely with Revenue PODs (cross-functional sales and marketing teams) to align field marketing execution with commercial targets. Ensure marketing activities directly feed into POD-level revenue goals, providing visibility on sourced and influenced pipeline at a granular, team-based level.Pipeline & Demand GenerationConnect the dots between activity and impact. Track marketing-sourced pipeline contribution, monitor channel metrics, and report on the commercial value of every initiative using Power BI, Oracle Analytics, and marketing automation platforms.Brand, Content & CommunicationsEnforce global guidelines across all outputs, agency-produced, partner-generated, or internal — while ensuring every piece of messaging aligns with the broader GTM strategy and commercial objectives. Develop compelling customer case studies with Sales and manage local social media that balances global consistency with local relevance.Multi-Stakeholder Interface & Sales AlignmentServe as the go-to marketing contact for field sales teams, channel partners, regional leadership, and cross-functional stakeholders — building trusted relationships through regular face-to-face engagement at our London or Southampton offices and effective remote collaboration across time zones. Align on priorities, event participation, and campaign execution. Brief agencies with clarity and hold the line on timelines and quality. Strengthening Vertiv's presence in the local industry ecosystem through meaningful community engagement and connections.AI-Powered Efficiency & InnovationThe Specialist is expected to leverage the latest AI-powered content creation, research, productivity, and workflow automation tools to improve efficiency, enhance content quality, and support content strategy execution. Staying ahead of emerging technologies and integrating them into day-to-day marketing operations is a core expectation of this role.Data Governance & AccountabilityEnsure all data handling, lead capture, and communications comply with privacy regulations. Track KPIs consistently, maintain data accuracy, and share performance openly, reinforcing a culture of transparency and continuous improvement.QualificationsRequiredBachelor’s degree in marketing, Communications, Business, or related field3+ years of professional experience in field marketing, including content, communications, technical writing, engineering, IT, data center, or related technical fields.Demonstrated experience managing event logistics and post-event lead processes.Familiarity with CRM tools (e.g., Oracle, Redwood) and marketing automation platforms (e.g., 6Sense, PowerBi, social media scheduling tools, budgeting & expense platforms)Experience using Canva ProExcellent written and verbal EnglishWillingness to travel regularly within the UK, Ireland, and the Nordics (up to 3 months per year) and attend face-to-face meetings at our London or Southampton office on a regular basis.Desired ProfileStrong interest in and understanding technology and digital infrastructure markets.Ability to quickly learn and communicate complex technical subjects.Ability to manage multiple projects and navigate structured review and approval processes.Experience in B2B technology marketing, engineering, IT, data center, or related industries preferred.Familiarity of working for large US corporatesProven PR experience and event management skills.Skills & CompetenciesEnd-to-end event delivery and logistics managementLead management mastery, CRM routing, qualification, and follow-up frameworks.Proven ability to interface with multiple stakeholders at all levels, both face-to-face and via remote/virtual channelsStrong project management and stakeholder coordination skillsExperience working with cross-functional stakeholders and managing multiple priorities simultaneously.Experience working within or alongside Revenue PODs or cross-functional commercial teams.PR coordination and narrative development for regional media and industry audiencesBrand enforcement with a keen eye for visual and messaging consistencySocial media content development and performance monitoring across B2B platformsClear, compelling copywriting for case studies, sales enablement, and event collateralCross-functional collaboration with sales teams, agencies, and internal stakeholdersMarketing analytics and pipeline reportingProficiency in leveraging AI-powered content creation, research, productivity, and workflow automation tools to improve efficiency and enhance output quality.Highly organised with the ability to manage multiple concurrent projects in a fast-paced, high-growth environment.#LI-NS1 #LI-REMOTEThe successful candidate will embrace Vertiv’s Core Principles & Behaviors to help execute our Strategic Priorities.OUR CORE PRINCIPLES: Safety. Integrity. Respect. Teamwork. Inclusion.OUR STRATEGIC PRIORITIES• High-Performance Culture• Customer Focus• Operational Excellence• Innovation• Financial StrengthVERTIV BEHAVIORS• Own it• Act with urgency• Foster a customer-first mindset• Think big and execute• Lead by example• Drive continuous improvement• Learn and seek out development• Promote transparent & open communicationAbout VertivVertiv (NYSE: VRT) brings together hardware, software, analytics and ongoing services to enable its customers’ vital applications to run continuously, perform optimally and grow with their business needs. Vertiv solves the most important challenges facing today’s data centers, communication networks, and commercial and industrial facilities with a portfolio of power, cooling and IT infrastructure solutions and services that extend from the cloud to the edge of the network. Headquartered in Westerville, Ohio, USA, Vertiv employs around 34,000 people and does business in more than 130 countries. Visit Vertiv.com to learn more.Equal Opportunity EmployerVertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to help.join@vertiv.comEqual Opportunity Employer We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. Posting Date: 2026-07-24

Mechanical Maintenance Engineer Bedford, commutable from: Kettering, Cambridge, Northampton, Luton, Milton Keynes£30,000-£38,000 + Shifts (7am-3pm, 2pm-10pm) + Training + Overtime + Development + Company BenefitsExcellent opportunity for a Mechanical Maintenance Engineer looking to develop their skillset within one of the UK's leading research facilities within an interesting and unique field.On offer is the opportunity to join a specialist company where you will be mentored and working alongside experts while receiving training to maintain and repair highly specialised wind tunnel equipment within a varied and technical role.This company are one of the only facilities in the world that specialise in their niche and they are now looking for a new addition to their team to immerse themselves within their bespoke projects and technical work.The day to day of this role includes carrying out mechanical maintenance and repair across the facility, supporting the operation and upkeep of complex wind tunnel systems and associated mechanical equipment. This role works on a rotating shift pattern (7am-3pm, 2pm-10pm) and has lots of optional overtime available.The ideal candidate will have a background in mechanical maintenance with a relevant mechanical engineering qualification (e.g. HND/HNC or apprenticeship). Experience working with rotating machinery, mechanical systems or industrial equipment is advantageous but not essential as full training will be provided.The candidate must hold a British passport and will be able to pass security clearance.The role: Mechanical Maintenance Engineering Maintenance and repair of wind tunnel equipment (Training Provided) Mon-Fri, rotating shift pattern Site based in BedfordThe person: Mechanical maintenance experience Mechanical qualification (HND/HNC or apprenticeship) British passport Must be able to pass security clearanceReference Number: BBBH270899To apply for this role or to be considered for further roles, please click "Apply Now" or contact Eve Terry at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Electrician ( Full Maintenance Training )£40,000 - £44,000 + Days / Monday - Friday + Overtime (1.5x) + Progression + Training + BenefitsBedford (commutable from Milton Keynes, Leighton Buzzard, St Neots, Hitchin, Sandy, Biggleswade & surrounding areasAre you a Electrician with looking to join a leading manufacturer offering great benefits and plenty of progression opportunities whilst the chance to develop into a maintenance engineer?This is an excellent opportunity to join a multi billion pound manufacturer within a stable industry where you will receive training from experienced Engineers.The company are well established in their industry and have seen continued growth. They are now looking to recruit a number of Maintenance Engineers.You will carry out planned and reactive maintenance on the company's modern equipment while also learning to play a key role in the development and implementation of continuous improvement strategies across the manufacturing site.This role would suit a Electrician looking to join an industry leading Manufacturer offering overtime and opportunities for progression.The Role: Maintenance Engineer Maintenance and repair of specialist manufacturing machinery Days based - Monday - Friday (5:30 - !4:30)The Person: Electrician Wanting to join established company Wants to develop skillset through technical trainingBBBH277993To apply for this role or to be considered for further roles, please click "Apply Now" or contact Tom at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Installation Technician \n £31,000 - £34,000 + Plenty of Overtime + Van + Excellent Company Benefits \n Home Based: Travelling to Clients \n Do you have a hands on Engineering background, looking to join a market leader, who will provide full product training and give you the opportunity to dramatically increase your earnings via overtime? \n This is a fantastic opportunity to join a growing business, in a highly varied position. They will develop your skill set to allow you to progress into a specialist engineer. \n This company are renowned for the development of their engineers and looking after their staff. They are going from strength to strength and looking to increase their engineering department to cope with demand. \n The role will require you to travel to customer sites to install, maintain and repair a variety of products. Plenty of overtime is on offer. \n This position would suit someone with a hands on engineering background, looking for on the job training and plenty of overtime for a market leading company. \n The Role: \n\n • Travelling to customer sites\n, • Full Product training\n, • Monday - Friday\n\n The Person: \n\n • Hands on Engineering background\n, • Holds a CSCS card\n, • Wanted training and development\n\n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

CNC SetterBedford, commutable from: Kettering, Cambridge, Northampton, Luton, Milton Keynes£30,000 - £38,000 + Day Shifts (7am-3pm) + Overtime/Shift Premiums + Training + Private Health Insurance + 26 Days Holiday (+ BH)Excellent opportunity for an experienced CNC Machinist to join an innovative company during an exciting period of growth, taking on a key role in producing high-precision components for world-leading research projects.On offer is a hands-on position where you will work on unique, high-value components used to manufacture scaled models for aerodynamic testing in an industry leading facility.This company operates one of the only facilities in the world that specialises in this niche field. They are now looking for a skilled CNC Programmer/Operator to join their team and play a key part in the ongoing success and development of their globally recognised operation.The day-to-day responsibilities of this role includes setting and operating CNC milling machines (3, 4, and 5-axis), interpreting technical drawings, and ensuring precise machining of bespoke parts to tight tolerances.The ideal candidate will have experience with CNC setting and operation, a strong understanding of machining processes, and a high level of attention to detail. Experience with Heidenhain controls is desirable, although training can be provided for those with other control system experience.The Role: Programming, setting, and operating 3-, 4-, and 5-axis CNC milling machines Working from detailed engineering drawings and applying GD&T principles Operating multiple machines as required to meet production schedules Monday to Friday, days-based (38 hours per week)The Person: Proven CNC Machinist with experience in 3- and 5-axis Skilled in CNC setup, tooling, and workpiece preparation HNC/HND, City & Guilds, or equivalent qualification/apprenticeship in CNC machining Experience with Heidenhain controls desirable (training available)Reference Number: BBBH264561To apply for this role or to be considered for further roles, please click "Apply Now" or contact Eve Terry at Rise Technical Recruitment.Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications, and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Leidos is seeking a ServiceNow Engineer to join the U.S. Air Force Cloud One Architecture and Common Shared Services (ACSS) program. This is an exciting opportunity to support one of the Department of Defense's largest multi-cloud environments, helping modernize enterprise cloud services while improving mission resiliency, security, and cost effectiveness for the U.S. Air Force.Location:This position will be hybrid remote. Candidates will be required to work onsite as needed. Preferred candidates will be located near Hanscom AFB (Boston, MA).Primary Responsibilities:Catalog Development: Build, maintain, and optimize Service Catalog items, record producers, and complex order guides using Flow Designer.Core Configuration: Write and maintain Business Rules, Client Scripts, UI Policies, UI Actions, and Data Policies.CSM Playbooks: Design, configure, and update Process Automation Designer (PAD) workflows and customer-facing Playbooks. Workspace Configuration: Customize and support Configurable Workspaces for both ITSM agents and CSM customer service reps.Access & Security: Manage user roles, group memberships, and configure Access Control Lists (ACLs) to secure data.Platform Maintenance: Update and refine existing forms, views, fields, and notification templates based on daily business requests.Reporting & Dashboards: Create and distribute standard reports, interactive dashboards, and automated scheduled tracking.Testing & Quality: Perform thorough unit testing in lower environments and participate in peer code reviews before production deployment.Minimum Qualifications:Bachelor’s and four 4+ years or more of experience; Master’s and 2+ years or more of experience. Additional experience may be accepted in lieu of degree.Secret clearance required to maintain employmentUS citizenship requiredCertifications: CompTIA Security+ or equivalent (IAT-2)Excellent facilitation, communication, and stakeholder engagement skillsAbility to work in a fast-paced, mission-driven environmentStrong documentation, communication, and cross-functional collaboration skillsFamiliarity with DevSecOps principles and practices.Familiarity with Agile methodologies such as Scrum and/or Kanban.Excellent customer service skills, with experience working in a customer-facing positionExperience with ServiceNow implementationsServiceNow certification(s): CSAPreferred Qualifications:Experience with USAF Cloud One or Platform 1ServiceNow certification(s): CAD, CIS-ITSM, and CIS-CSMIf you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares.Original Posting:August 4, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $87,100.00 - $157,450.00The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.SummaryLocation: Bedford, MAType: Full time

Technical Training Specialist \n Location: Field Based \n Salary: Up to £55,000 Basic + Annual Bonus \n Pybus Recruitment is recruiting for an enthusiastic and driven Technical Training Specialist to support the development of technical expertise across a growing automotive dealer network. \n This is a field-based role with regular travel between two UK training centres and occasional visits to retailer sites. The successful candidate will play a key role in delivering engaging technical training, inspiring network staff, and helping to build a culture of continuous learning. \n Locations \n\n • Nottingham\n, • Bedford\n\n The role is expected to involve approximately: \n\n • 80% travel between the Nottingham and Bedford training centres\n, • 20% travel to dealer and retailer locations\n\n Key Responsibilities \n\n • Develop and implement a structured technical training programme across the dealer network.\n, • Design and deliver engaging classroom and webinar-based training courses covering technical systems, product information, diagnostics, and industry knowledge.\n, • Collaborate with Regional Aftersales Managers and Technical Support teams to identify training requirements and develop tailored learning solutions.\n, • Create an inspiring and engaging training environment that encourages delegates to continue their professional development.\n, • Foster a culture of continuous learning and development throughout the Aftersales network.\n, • Lead the development and implementation of a Learning Management System (LMS) platform for the UK market.\n, • Manage training budgets and ensure activities are delivered within agreed financial parameters.\n, • Evaluate emerging technologies, tools, and equipment to improve training effectiveness and efficiency.\n, • Support additional Aftersales projects and departmental activities as required.\n\n About the Ideal Candidate \n We are looking for a trainer who is: \n\n • Enthusiastic, relatable, and highly motivated.\n, • Passionate about developing people and sharing technical knowledge.\n, • Able to inspire delegates and create a memorable training experience.\n, • Driven to achieve high standards and continuously improve training delivery.\n, • Comfortable engaging with technicians, managers, and stakeholders at all levels.\n\n The hiring manager's vision is to create a training environment where every attendee leaves feeling engaged, motivated, and committed to returning for further development opportunities. \n Essential Requirements \n\n • Minimum 5 years' experience within the automotive industry.\n, • Significant hands-on Master Technician experience.\n, • Strong technical diagnostic capability.\n, • Level 4 Electric Vehicle (EV) knowledge and experience is essential.\n, • Experience creating and implementing training plans and development programmes.\n, • Knowledge of web-based learning platforms and modern training methodologies.\n, • Formal training or engineering qualifications, Master Technician status, or equivalent relevant experience.\n, • Ability to influence and engage stakeholders at all levels.\n, • IMI-recognised training in hybrid and electric vehicle systems is highly desirable.\n, • Ability to read and interpret engineering drawings and electrical schematics.\n, • Strong customer focus and commitment to service excellence.\n, • Excellent English communication skills, both written and verbal.\n, • Proficiency in Microsoft Office applications.\n, • Full, clean UK driving licence.\n, • Willingness to travel extensively and stay away from home when required.\n\n Training Experience \n Previous formal training experience would be advantageous but is not essential. Candidates with the right technical background, personality, attitude, and work ethic will be considered, with support available to develop their training and presentation skills. \n Pybus Recruitment is an equal opportunities recruiter and welcomes applications from all suitably qualified candidates.

Position Summary:Leidos is seeking an experienced IT Specialist to provide technical and operational information technology support for government and defense programs operating within classified environments. The selected candidate will support installation, configuration, maintenance, troubleshooting, and sustainment of IT systems, hardware, software, and networked environments supporting mission-critical operations. This role supports the management of physical and virtual environments by implementing best practices for system performance, security, backup and recovery, storage allocation, and infrastructure optimization. Responsibilities include monitoring system operations, applying patches and updates, reviewing performance logs to identify anomalies, troubleshooting technical issues, and recommending system configurations and functional improvements to support operational and customer requirements.This position requires strong technical expertise in enterprise IT support, systems administration, customer support, and secure computing environments. The ideal candidate will work closely with system administrators, cybersecurity personnel, network engineers, and operational teams to ensure reliable system performance, compliance with security requirements, and operational readiness across multiple technology platforms. Key Responsibilities:Install, configure, maintain, and troubleshoot desktop systems, laptops, servers, peripherals, and enterprise IT equipment within classified and operational environments. Provide technical support and issue resolution for hardware, software, operating systems, applications, and network connectivity issues. Support user account management, system access requests, password management, and system administration activities. Monitor system performance and support implementation of patches, upgrades, software installations, and technology refresh activities. Maintain IT asset inventories, system documentation, configuration records, and technical support procedures. Coordinate with cybersecurity, network engineering, and systems administration teams to ensure compliance with security policies and operational requirements. Support implementation and maintenance of secure IT environments in accordance with government and organizational cybersecurity standards. Assist with system backups, data recovery, continuity of operations, and disaster recovery support activities. Support technical troubleshooting, root cause analysis, and resolution of system incidents and operational issues. Participate in system deployments, operational testing, customer support activities, and technical upgrade initiatives. Required Qualifications:Bachelor’s degree with 8+ years of prior relevant experience or Master’s degree with 6+ years of prior relevant experience; additional experience may be considered in lieu of degree. Experience supporting enterprise IT systems, technical support operations, systems administration, or help desk activities within government or defense environments. Knowledge of Windows and/or Linux operating systems, enterprise IT infrastructure, networking fundamentals, and system administration practices. Strong troubleshooting, analytical, communication, and customer support skills. Active Top Secret/SCI security clearance required. Preferred Qualifications:Experience supporting DoD, Intelligence Community, or classified operational environments. Familiarity with virtualization technologies, cloud environments, enterprise collaboration platforms, and endpoint management tools. Knowledge of cybersecurity best practices, DISA STIGs, RMF, and secure system configuration requirements. Experience with Active Directory, Microsoft 365, SharePoint, VMware, or enterprise IT management platforms. Professional certifications such as Security+, Network+, A+, Microsoft, Cisco, Linux, or related IT certifications. AMSOPP1If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares.Original Posting:July 20, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $92,300.00 - $166,850.00The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.SummaryLocation: Bedford, MAType: Full time

Reference: SSH/AR/070207Job Type: Full-time, PermanentSalary: 50,000 maximumLocation: Dulwich, Clapham, LondonSector: Healthcare / SocialcarePosted: 2026-03-25An exciting opportunity has arisen for a Practice Manager to lead a well-established dental practice providing gentle, stress-free care for infants to teens.As a Practice Manager, you will oversee the smooth running of the practice, managing operations, finances, staff, and patient experience.This full-time permanent role offers a salary of up to 50,000 and benefits.You will be responsible for:Ensure a smooth and efficient patient journey from booking to departure.Maintain predictable patient flow across all appointment types.Write and update standard operating procedures (SOPs).Optimise room usage, clinician schedules, and staffing levels.Manage recruitment, hiring, and onboarding for support roles.Conduct performance reviews and address underperformance promptly.Track revenue and monitor conversion rates from enquiries to appointments.Review payroll-to-revenue ratios and identify cost efficiencies.Improve patient retention through recalls, loyalty programmes, and referrals.What we are looking forPreviously worked as a Dental Practice Manager, Practice Manager, Clinical Manager, Operations Manager or in a similar role.Have at least 3 years of experience managing dental practice.Strong commercial awareness with experience tracking revenue and KPIsEffective people management and leadership skillsCommitment to delivering excellent patient serviceThis is a fantastic opportunity for an experienced Practice Manager to take ownership of a private children’s dental clinic.Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.Additional Resources are an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.

General information Legal company Framatome is an international leader in nuclear energy recognized for its innovative, digital and value added solutions for the global nuclear fleet. With worldwide expertise and a proven track record for reliability and performance, the company designs, services and installs components, fuel, and instrumentation and control systems for nuclear power plants. Its more than 20 000 employees work every day to help Framatome's customers supply ever cleaner, safer and more economical low-carbon energy. Visit us at www.framatome.com, and follow us on Twitter: @Framatome_ and LinkedIn: Framatome.Framatome is owned by the EDF Group (80.5%) and Mitsubishi Heavy Industries (MHI – 19.5%). Reference number 2026-27027 Publication date 7/9/2026 Job detailsCategoryTA - DESIGN & ENGINEERING - TAD - Mechanical EngineeringJob Opening TitleManufacturing EngineerJob typeNon fixed termBU descriptionEnergise Your Career with Framatome UK – Powering a Safer, Smarter Nuclear FutureFramatome is a global leader in nuclear energy, recognised for delivering innovative, value-added technologies that design, build, maintain, and advance the world's nuclear fleet. With 20,000 employees in over 70 locations worldwide, we provide components, fuel, and control systems for nuclear power plants, along with a full suite of reactor services — all focused on improving safety, performance, and sustainability.Backed by EDF Group (80.5%) and Mitsubishi Heavy Industries (19.5%), we're driving the future of clean energy. Here in the UK, our team is already 400 strong — and growing. As we expand our service offerings across the UK nuclear industry, we're aiming to reach 600 dedicated professionals in 2026.Now's your chance to join a company that's shaping the energy transition — where your expertise will matter, your growth will be supported, and your work will help power generations to come.What are we hiring for?We are seeking a Manufacturing Engineer here to join our team in Cranfield to provide operational engineering support to all current and future project activity within the Cranfield Lab and workshop facilities. This will include but not exclusively cover planning, build, commission, maintain and operate all r&D test rigs and facilities to meet the customers expectations and using current methods and best practice. Job descriptionWhat will you be doing?Within this position you will be responsible for:Liaising with engineering and project management team to take design drawings and details and build measurement systems, this would typically be in extreme pressure, flow or heat conditions.Detailing project plans to ensure the timely delivery of project milestones and objectives.Assemble and install mechanical components, machinery, and equipment in accordance with technical drawing, piping and instrumentation diagram and technical specificationsOperate the various test rigs and fixtures to perform validation and verification tests on customers assembliesPerform routine maintenance, inspections, and repairs on test rigs, machinery and specialized systemsTroubleshoot and diagnose mechanical issues, identifying and replacing faulty partsCollaborate with other team members and stake holders to ensure efficient and right first time delivery of systemsHealth and Safety is paramount, and all activities will be undertaken with safety as the driving focusMaintain accurate records of maintenance and calibration activitiesKey outputs: Creation pf PFD, P&ID, SchematicsWork instructionsAssembly instructionsAnalysis reporting to support project objectivesDFMEA, HAZOP,Risk AssessmentsGoods procurementProject Milestone RequirementsProfileWhat are we looking for?Ideal experience for this position would include:Bachelor's Degree in Engineering5(+)yrs Experience within a manufacturing, R&D Test or Service environmentPerson specification: Proven experience as a in an Engineering displine (Mechanical/I&C) or similar roleStrong mechanical aptitude and problem-solving skillsProven experience of managing project work packagesProficiency in using hand and power toolsAbility to read and interpret technical drawings and schematicsExcellent communication and teamwork abilitiesPhysical stamina and ability to work in various conditions (e.g., confined spaces, heights, etc.)Familiarity with working in ISO or similar procedure environmentEnthusiastic and committed, willing to work within tight timescalesBenefitsWhat’s in it for you?25 days annual leave per year rising by 1 day for every 2 years worked (max 30 days) + Bank Holidays8% employer pension contribution with employee 1% contribution (salary sacrifice)Individual and family private health careDental insurance for employeesCashplan – Level 2 coverLife assurance (4x salary)Employee assistance programme (EAP)Income ProtectionJob locationJob locationUnited Kingdom, CranfieldJob location (site)CranfieldJob familyStandardApplicant criteriaMinimum level of education requiredBachelorMinimum level of experience requiredExperiencedEmployment levelCadre

We are hiring for a Catering Assistant at Wootton Upper, Wootton, Bedfordshire to perform a variety of food production tasks along with food service in our schools. Caterlink is the education sector catering specialist.

We are hiring for a Relief Chef/Catering.

Saab UK is seeking a Head of Software Engineering to lead BlueBear's software capability, accountable for delivery across research, product development and customer programmes.

Introduction Saab UK is part of Scandinavia’s largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Head of Software Engineering is the focal point for software engineering capability within BlueBear a Saab company and is accountable for the performance, development and growth of the Software Engineering function. You will be responsible for ensuring the effective delivery of software solutions across research, product development and customer programmes, encompassing mission systems, embedded software, autonomy-enabling technologies, DevOps capabilities and supporting engineering infrastructure. The role will provide strategic, technical and people leadership to ensure the business develops and delivers high-quality, innovative and secure software systems. Working closely with Engineering, Product, Programme and Saab stakeholders, the role is responsible for defining software strategy, developing engineering capability, improving engineering maturity and fostering a high-performing engineering culture. Lead the Software Engineering function to ensure successful delivery of projects and products to agreed cost, schedule, quality and performance targets. Define and execute the Software Engineering strategy in alignment with business objectives and future product roadmaps. Provide leadership, governance and technical direction across all software engineering activities. Support the definition and execution of the organisation’s long-term technical vision. Promote a culture of innovation, collaboration, accountability and continuous improvement throughout the engineering organisation. Stay current with emerging technologies, industry trends and software engineering best practices. Oversee software development activities across R&D programmes, product development and customer-funded projects. Ensure effective planning, prioritisation and utilisation of software engineering resources. Establish and maintain software engineering metrics and performance indicators. Lead software delivery reviews and ensure effective management of technical risks, dependencies and issues. Work collaboratively with Project Managers and Technical Leads to achieve successful project outcomes. Support software-related customer demonstrations, trials and technical reviews. Establish and maintain software engineering standards, processes and governance. Ensure appropriate architectural oversight across software products and technology platforms. Champion best practices in software design, testing, configuration management and release management. Drive continuous improvement in software quality, reliability, safety and security. Promote the adoption of automated testing, CI/CD, DevOps and modern software development practices. Manage technical debt and ensure long-term maintainability of software products and frameworks. Lead, coach, mentor and develop the Software Engineering team and individuals technical growth. Build organisational capability through recruitment, succession planning and skills development. Conduct performance management, objective setting and career development activities. Foster an inclusive, collaborative and high-performing engineering culture. Work closely with HR to ensure effective workforce planning and talent management. Ensure the software organisation has effective tooling, development environments and engineering infrastructure. Support continual improvement of source control, build systems, CI/CD pipelines, test automation and deployment processes. Oversee software development tooling, licensing and open-source governance. Drive improvements in developer productivity, engineering efficiency and operational resilience. Support business development activities through technical leadership, customer engagement and bid support. Contribute to proposal development, technical strategy and solution definition activities. Build strong relationships with customers, suppliers and strategic partners. Identify opportunities across Saab and external organisations that can expand BlueBear’s software capability and business opportunities. Represent the Software Engineering function at internal and external reviews, workshops and technical forums. As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. At Saab, we constantly look ahead and push boundaries for what is considered technically possible. We collaborate with colleagues around the world who all share our challenge – to make the world a safer place. Saab is a global defense and security company operating in the fields of air, land and naval defense, civil security and commercial aeronautics. We number approximately 26,100 employees and have operations on all continents. Technologically we are leaders in many areas, and one-fifth of our earnings are spent on research and development. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Equal Opportunity/Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, or disability status. #J-18808-Ljbffr

Introduction Saab UK is part of Scandinavia’s largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Head of Software Engineering is the focal point for software engineering capability within BlueBear a Saab company and is accountable for the performance, development and growth of the Software Engineering function. You will be responsible for ensuring the effective delivery of software solutions across research, product development and customer programmes, encompassing mission systems, embedded software, autonomy-enabling technologies, DevOps capabilities and supporting engineering infrastructure. The role will provide strategic, technical and people leadership to ensure the business develops and delivers high-quality, innovative and secure software systems. Working closely with Engineering, Product, Programme and Saab stakeholders, the role is responsible for defining software strategy, developing engineering capability, improving engineering maturity and fostering a high-performing engineering culture. Lead the Software Engineering function to ensure successful delivery of projects and products to agreed cost, schedule, quality and performance targets. Define and execute the Software Engineering strategy in alignment with business objectives and future product roadmaps. Provide leadership, governance and technical direction across all software engineering activities. Support the definition and execution of the organisation’s long-term technical vision. Promote a culture of innovation, collaboration, accountability and continuous improvement throughout the engineering organisation. Stay current with emerging technologies, industry trends and software engineering best practices. Oversee software development activities across R&D programmes, product development and customer-funded projects. Ensure effective planning, prioritisation and utilisation of software engineering resources. Establish and maintain software engineering metrics and performance indicators. Lead software delivery reviews and ensure effective management of technical risks, dependencies and issues. Work collaboratively with Project Managers and Technical Leads to achieve successful project outcomes. Support software-related customer demonstrations, trials and technical reviews. Establish and maintain software engineering standards, processes and governance. Ensure appropriate architectural oversight across software products and technology platforms. Champion best practices in software design, testing, configuration management and release management. Drive continuous improvement in software quality, reliability, safety and security. Promote the adoption of automated testing, CI/CD, DevOps and modern software development practices. Manage technical debt and ensure long-term maintainability of software products and frameworks. Lead, coach, mentor and develop the Software Engineering team and individuals technical growth. Build organisational capability through recruitment, succession planning and skills development. Conduct performance management, objective setting and career development activities. Foster an inclusive, collaborative and high-performing engineering culture. Work closely with HR to ensure effective workforce planning and talent management. Ensure the software organisation has effective tooling, development environments and engineering infrastructure. Support continual improvement of source control, build systems, CI/CD pipelines, test automation and deployment processes. Oversee software development tooling, licensing and open-source governance. Drive improvements in developer productivity, engineering efficiency and operational resilience. Support business development activities through technical leadership, customer engagement and bid support. Contribute to proposal development, technical strategy and solution definition activities. Build strong relationships with customers, suppliers and strategic partners. Identify opportunities across Saab and external organisations that can expand BlueBear’s software capability and business opportunities. Represent the Software Engineering function at internal and external reviews, workshops and technical forums. As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. At Saab, we constantly look ahead and push boundaries for what is considered technically possible. We collaborate with colleagues around the world who all share our challenge – to make the world a safer place. Saab is a global defense and security company operating in the fields of air, land and naval defense, civil security and commercial aeronautics. We number approximately 26,100 employees and have operations on all continents. Technologically we are leaders in many areas, and one-fifth of our earnings are spent on research and development. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Equal Opportunity/Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, or disability status. #J-18808-Ljbffr

Saab UK is seeking a Head of Software Engineering for BlueBear, a Saab company, to lead software delivery across R&D, product development and customer programmes. You will drive strategy, architecture and engineering excellence, ensuring secure, high-quality software across mission systems and autonomy-enabled platforms. As a senior leader, you will manage governance, risk, and performance metrics, overseeing DevOps tooling, CI/CD practices and engineering infrastructure while shaping the #J-18808-Ljbffr

As a Deputy Store Manager at Lidl, you’ll be cool, calm and collected, getting stuck in on the shop floor and behind the scenes. You’ll also enjoy great responsibility while the Store Manager is absent, taking ownership of the store and leading by example to support your colleagues. Independentl

Saab UK is seeking a Head of Software Engineering for BlueBear, a Saab company, to lead software delivery across R&D, product development and customer programmes. You will drive strategy, architecture and engineering excellence, ensuring secure, high-quality software across mission systems and autonomy-enabled platforms. As a senior leader, you will manage governance, risk, and performance metrics, overseeing DevOps tooling, CI/CD practices and engineering infrastructure while shaping the #J-18808-Ljbffr

Senior Mechanical Systems EngineerBedford, commutable from: Milton Keynes, Northampton, Cambridge, Kettering, Luton, Stevenage50,000-55,000 + Day Shifts (Monday-Friday) + Training & Development + Private Health Insurance + 26 Days Holiday (+ BH) + PensionExcellent opportunity for an experienced Mechanical Engineer to join a unique engineering organisation during an exciting period of investment and transformation, taking on a key role in the development and maintenance of world-class aerodynamic testing facilities. On offer is an autonomous position where you will play an instrumental role in maintaining, upgrading and developing complex mechanical systems, leading engineering projects from concept through to commissioning while ensuring reliability, safety and long-term performance across critical plant and infrastructure. This company operates one of the only facilities of its kind in the world, specialising in advanced aerodynamic testing, model design and manufacture for globally recognised aerospace and defence organisations. They are now looking for a Senior Mechanical Systems Engineer to join their Systems Engineering Team and support the continued evolution of their highly specialised engineering facilities. The day-to-day responsibilities of this role include maintaining and improving legacy plant and machinery, designing and implementing new mechanical systems, leading refurbishment and upgrade projects, reviewing operational data, managing suppliers, supporting commissioning activities and driving continuous improvement across a wide range of industrial equipment and infrastructure. The ideal candidate will hold a Mechanical Engineering degree, have several years' experience working with industrial plant or process equipment, and be confident leading engineering projects through the full design lifecycle. Experience with control systems, electronics or engineering software would be advantageous but is not essential. Candidates must hold a British Passport and be able to pass Security Clearance. The Role:Mechanical systems engineering across complex industrial plant and facilitiesLead refurbishment, upgrade and new equipment projectsDesign, specification, commissioning and technical acceptance of engineering solutionsMaintain and improve legacy mechanical systems and infrastructureMonday to Friday, days-based role, fully site-based in BedfordThe Person:Degree qualified in Mechanical Engineering or similar5+ years' experience in a similar industrial engineering roleExperience with industrial plant, machinery or process equipmentUnderstanding of engineering design control and change managementExperience with CAD or engineering analysis software desirableMust hold a British Passport and be able to pass Security ClearanceRise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client.We are an equal opportunities company and welcome applications from all suitable candidates.Discipline(s): Rise EngineeringJob type: Permanent

Night Shifts | 30-35 days holiday (pro rata) | 10% in-store discount | Enhanced family leave.Everyone who works at Lidl brings something unique to the table - but we also have a whole lot in common.We’re reliable, organised, and ready to go far.As a Retail Shift Manager at Lidl, you’ll help us m

Position Summary:The Acquisition Program Support position is responsible for planning, organizing, and managing resources to support the successful execution of acquisition and program objectives. This role ensures programs and projects are completed within scope, schedule, and budget constraints while coordinating activities across functional teams, subcontractors, and stakeholders. The position supports program performance, resource management, risk mitigation, and compliance with organizational and customer requirements.This role has significant impact on day-to-day program operations and may oversee projects or processes spanning multiple professional areas. Responsibilities include collaborating with program leadership, supporting financial and operational objectives, and providing guidance, coaching, and work delegation to junior team members. Strong communication, organizational, and leadership skills are essential to successfully manage priorities in a dynamic program environment.Key Responsibilities:Serve as the Site Lead reporting to the Program Manager and Deputy Program ManagerLead day-to-day operations of program activities, ensuring alignment with strategic objectives.Coordinate across engineering, technical, and operational teams to ensure integrated solutions.Monitor / Assist with program performance (cost, schedule, technical) and and coordinate corrective actions with the PM / DPM.Support development and execution of program plans, schedules, and budgets.Identify, assess, and mitigate risks; maintain risk registers and mitigation strategies.Facilitate communication between stakeholders, including customers, leadership, and technical teams.Conducted program analysis and provided recommendations to improve operational efficiency, acquisition strategy, and resource allocation.Monitor Subcontractor performance and execution of work on site and report issues to the PM / DPM.Author Statements of Work (SOWs) and associated documentation to formalize and track subcontractor performanceWill be responsible for working with operations management, financial support staff, and contracts/subcontracts officers in managing a large CPFF contract.Facilitate Meetings, working groups and Integrated Product Teams (IPTs) to ensure effective communication and collaboration across organizations.Developed and maintained acquisition documentation, program schedules, risk management plans, briefing materials, and status reports.Required Qualifications:Bachelor’s degree with 8+ years of prior relevant experience or Master’s degree with 6+ years of prior relevant experience. Additional years of experience will be considered in lieu of degree.Demonstrated experience supporting or managing complex, multi-domain programs.Strong understanding of engineering lifecycle processes (e.g., systems engineering, software development, or hardware integration).Proven ability to track cost, schedule, and performance metrics.Excellent leadership, communication, and stakeholder management skills.Preferred Qualifications:PMP (Project Management Professional) certification or equivalent.Proven leadership experience managing programs with diverse locations and 20+ personnel.Experience supporting complex defense contracts specifically with the Air ForceFamiliarity with Agile, DevSecOps, or systems engineering frameworks.Possess strong problem-solving, organizational, and verbal/written communication skills to be able to adapt communication style to suit different audiences.AMSOPP1If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares.Original Posting:May 18, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $92,300.00 - $166,850.00The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.SummaryLocation: Bedford, MAType: Full time

Homesense Bedford Store is hiring Retail Associates to help create a welcoming shopping environment and assist customers with their needs. Training is provided for all new staff.

Customer Support : Assist with inquiries about postal services. This role ensures the smooth distribution of mail while offering professional customer support. DisclaimerThis is not a job offer from the United States Postal Service (USPS).

Co-op Digital in Silsoe is hiring a Customer Team Leader to run a busy store on shift patterns, including weekends.You’ll lead a small team, ensure great service, and help deliver essential community services.You’ll coach colleagues on tills and in‑store operations, drive merchandising and sto

We are hiring for a Relief ChefManager to provide cover in the area of Bedfordshire / Hertfordshireto support our existing site-based teams This role is working term-time only and no weekends so is great for those looking for flexibility.

Hiring People seeks a Performance Creative Designer for Barford-based, part-time work three days per week.You will craft performance-focused creative for Meta, email, ecommerce and beyond, collaborating with our Creative Strategist to move quickly from brief to asset.We value ambitious makers who en

A leading recruitment specialist in the United Kingdom is hiring an experienced Service Advisor for their Aftersales team in Bedford.This role offers a competitive pay of up to £16.Ideal candidates should possess at least 12 months of Service Advisor experience and a Full UK Driving Licence.Benefit

FYZICAL Therapy & Balance Centers in Bedford, MA is hiring a Full-Time Physical Therapist Assistant (PTA).

MOT Tester training and qualification. MOT training and qualification available for the right technician. If you are already an MOT Tester, that's a bonus — but.

Basic Salary | Monday–Friday | No Weekends | Career Progression.Vehicle Technician, Mechanic, Service Technician or Diagnostic Technician.Monday–Friday working – no weekends.Modern workshop and up-to-date.Friendly, relaxed and supportive working environment.Stable, long-term position with a gr

Hawk Hiring is seeking an experienced Vehicle Technician to join our established team.

Ackerman Pierce is hiring a Housing Officer in Bedford on a temporary basis to help ensure safe and harmonious living environments.The role is day-to-day cover with potential for ongoing engagement.Responsibilities include transfers, ASB management, tenancy enforcement, and proactive inspections.The

Center Parcs' Aqua Sana Forest Spa in Woburn is hiring a Spa Shift Manager.

The Vale Medical Practice (Wootton & Shortstown Practice) is hiring two part-time practice administrators to join our busy support team across both sites.The role involves providing full administrative support across departments, assisting the practice team, and guiding patients to the right service

You will deliver holistic patient care, perform clinical tasks under supervision, maintain care records, and contribute to patient assessments and discharge planning in a supportive team environment. The Manor Hospital in Bedford, part of Circle Health Group, is hiring a Registered Nursing Associate

Enjoy meaningful, creative work without committing to a traditional five-day week. Every sale also helps feed and nourish a child for a year through our charitable partner-something we're genuinely proud of. No two weeks are exactly the same.

Interaction Recruitment are hiring an experienced Refrigeration Engineer to join a leading facilities management business supporting a major UK supermarket contract. This position provides the opportunity to work on a high-profile contract with chances to develop expertise in commercial refrigeratio

LLC in Bedford is hiring a Complex Care Nurse to provide high-quality, nurse-led care for individuals with complex needs in the community. Ideal for nurses experienced in complex care environments. This full-time, permanent role includes supervising Healthcare Assistants, maintaining clinical docume

TSA is hiring Security Inspectors to evaluate airport security systems in Toston and ensure compliance with federal regulations. Coordinate with airport authorities. Help maintain the highest airport security standards.

Hawk Hiring in Bedford is seeking an experienced Vehicle Technician to service, diagnose, and repair a range of vehicles in a modern workshop with up-to-date diagnostic equipment.

Energy Jobline CVL is hiring a Tooling Design Engineer in Ampthill, Bedfordshire. The successful candidate will possess experience in tooling design within a manufacturing context, knowledge of CAD and PDM software, and strong communication skills to influence cross-functional teams.

You’ll support the Head Chef, lead shifts, and ensure every dish leaving the pass is of the highest standard. Albero Lounge, part of Loungers plc, is hiring a full-time Sous Chef to join the kitchen team.

The Group is the 7th largest further education college group in the sector by income and comprises 7 distinct colleges with 3 further educational colleges, 2 sixth form colleges, 1 agricultural college and 1 national college for motorsport. The Bedford College Group is committed to helping individua

Center Parcs UK & Ireland is seeking a Senior People Partner to shape and deliver a people strategy that drives performance and growth across the Village, Forest House and Head Office.

Center Parcs UK & Ireland is seeking a Senior People Partner to shape and deliver a people strategy that drives performance and growth across the Village, Forest House and Head Office.

Welcome to Center Parcs, the number one choice for short break holidays, employing a team of over 10,000 across Forest House and six separate villages located in the UK and Ireland. Colleague Recognition and Reward Scheme - offering a choice of Center Parcs and High Street vouchers. Discounted Cente