Trabajos forklift en WakefieldCrear alertas

Field Service Engineer Location: West Yorkshire (Field-Based)Salary: £16.50 per hour, rising to £17.50 per hour upon successful completion of probation.Benefits: Company Van | Bonus Scheme | Overtime Available | Permanent PositionThe Opportunity An exciting opportunity has arisen for an experienced Field Service Engineer to join a well-established and growing materials handling business. Working across a regional customer base, you will be responsible for servicing, maintaining and repairing a wide range of forklift trucks and materials handling equipment, ensuring customers receive a first-class service.This is an excellent opportunity to join a business that genuinely values its engineers, offering a competitive hourly rate, company vehicle, and a new performance-based bonus scheme , providing the opportunity to earn additional income based on completed site visits.The Role Carry out planned servicing, preventative maintenance and breakdown repairs on forklift trucks and materials handling equipment.Diagnose mechanical, electrical and hydraulic faults efficiently.Complete repairs to a high standard, minimising customer downtime.Attend customer sites across your designated region.Complete service documentation accurately using company systems.Maintain excellent customer relationships and represent the business professionally.Ensure all work is carried out in line with health and safety procedures.About You To be considered for this role, you must have previous experience servicing, maintaining or repairing forklift trucks or materials handling equipment.You'll ideally have experience with:Counterbalance and Reach TrucksElectric, Diesel and LPG Forklift TrucksMechanical, Hydraulic and Electrical Fault FindingMobile Field Service or Workshop EngineeringApplicants from recognised materials handling manufacturers or dealerships are highly encouraged to apply.You should also:Hold a full UK Driving Licence.Be confident working independently in a customer-facing environment.Have strong fault-finding and diagnostic skills.Be organised, reliable and committed to delivering excellent service.Package £16.50 per hourRising to £17.50 per hour following successful probationNew performance bonus scheme with additional earning potential based on completed site visitsCompany VanCompany Mobile PhoneOngoing Training & DevelopmentOvertime OpportunitiesPermanent, Full-Time PositionIf you're an experienced Field Service Engineer with a background in forklift trucks or materials handling equipment and are looking to join a business that rewards performance and invests in its engineers, we'd love to hear from you.TPBN1_UKTJ

Field Service EngineerWakefield£35,000 - £40,000 Basic + Product Training + Overtime (OTE £50,000+) + Vehicle + Mobile + Pension + Benefits + MORE! \n A leading German manufacturer of mechanical equipment is on the lookout for a skilled and ambitious Field Service Engineer ready to take the next step in their career. With a salary of £50,000+ with regular overtime, this is a fantastic opportunity to join a rapidly growing company that truly values your professional development. \n You'll gain hands-on experience with a diverse range of advanced machinery across the UK, working for a business that specialises in the installation, maintenance, repair, and manufacture of mechanical equipment. As demand continues to grow, the company is expanding its field service engineer team, making now the perfect time to come on board. If you're driven by career progression, technical challenge, and a rewarding package, this is the role for you. \n Your Role As A Field Service Engineer: \n • Covering West Yorkshire and surrounding areas Mechanical servicing, maintenance and breakdowns of equipment Electrical falt finding * Hands on training with equipment \n The Successful Field Service Engineer Will Have: \n • A mechanical background (Hydraulics, Motors, Gearboxes) Some electrical fault finding skills Commutable to and around West Yorkshire * Willing to travel UK wide when needed \n Please apply or contact Georgia Daly on for immediate considerationKeywords: Mechanical Fitter, Field service engineer, service engineer, Hiab crane, cranes, mechanical, hydraulics, material handling, forklift, forklift engineer, heavy plant, plant engineer, HGV, FLT, Fork Lift, Plant Equipment, Construction Equipment, Middlesbrough, Stockton-on-Tees, Darlington, York, Scarborough \n This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd We can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.

Workshop Assistant (Manual Handling) \n £25,000 - £30,000 + Work Life Balance + Mon-Fri + Early Finish Friday + 31 Days Holiday \n Wakefield \n Are you a Workshop Assistant looking for a stable and secure role with a company that is growing exponentially each year, with an excellent work-life balance, working Monday to Friday, within a friendly working environment? \n Are you looking for a long-term, permanent, and local role, with an early finish every Friday, plus optional overtime to increase your earnings? \n In this role you will be carrying out general labour work, consisting of cleaning the workshop, ensuring that it meets health and safety standards, manual lifting, as well as operating a forklift truck. \n This company has been going for over 15 years and have doubled their annual turnover in the last 2-3 years; they are now looking to do the same again in the next 6 years. They aspire to be the leading provider for specialist equipment, with a brand-new workshop on the way. \n This role would suit a Workshop Labourer looking for a stable, long-term role with a great work life balance, as well as optional overtime to increase their earnings. \n The Role: \n\n • General labour in a modern, clean workshop\n, • Maintaining cleanliness, operating a FLT, and manual lifting\n, • Monday to Thursday, 8am - 4pm, finish at 1:30pm on Friday\n, • Optional overtime, up to 10 hours a week\n\n The Person: \n\n • Workshop Assistant or similar\n, • Full UK driving license\n\n Reference Number: BBBH26690b \n Engineer, Engineering, Manufacturing, Operative, Operator, Forklift, Labourer, Labour, Handling, Lifting, FLT, Work Shop, Workshop, Wakefield, Leeds, Dewsbury, Normanton, Huddersfield \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Workshop Labourer (Engineering) \n £25,000 - £30,000 + Work Life Balance + Mon-Fri + Early Finish Friday+ 31 Days Holiday \n Wakefield \n Are you a Workshop Labourer looking for a long-term opportunity with a growing company that offers excellent work-life balance, Monday-Friday hours and a close-knit working environment? \n Are you looking for a long-term, permanent, and local role, with an early finish every Friday, plus optional overtime to increase your earnings? \n In this role you will be carrying out general labour work, consisting of cleaning the workshop, ensuring that the it meets health and safety standards, manual lifting, as well as operating a forklift truck. \n This company has been going for over 15 years and have doubled their annual turnover in the last 2-3 years; they are now looking to do the same again in the next 6 years. They aspire to be the leading provider for specialist equipment, with a brand-new workshop on the way. \n This role would suit a Workshop Labourer looking for a stable, long-term role with a great work life balance, as well as optional overtime to increase their earnings. \n The Role: \n\n • General labour in a modern, clean workshop\n, • Maintaining cleanliness, operating a FLT, and manual lifting\n, • Monday to Thursday, 8am - 4pm, finish at 1:30pm on Friday\n, • Optional overtime, up to 10 hours a week\n\n The Person: \n\n • Workshop Labourer or similar\n, • Full UK driving license\n\n Reference Number: BBBH26690a \n Engineer, Engineering, Manufacturing, Operative, Operator, Forklift, Labourer, Labour, Handling, Lifting, FLT, Work Shop, Workshop, Wakefield, Leeds, Dewsbury, Normanton, Huddersfield \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

A great opportunity has arisen for a Process Operator to join a leading manufacturing company \n Key Responsibilities: \n\n • Operate, monitor and control chemical processing equipment, including vessels, pumps, valves, mixers, filling lines and associated plant systems.\n, • Follow standard operating procedures, batch instructions and production schedules to manufacture products safely and consistently.\n, • Monitor process variables including temperature, pressure, flow rates, levels and reaction times, making adjustments where authorised.\n, • Handle, transfer, weigh, mix and charge raw materials, intermediates and finished products in line with site procedures.\n, • Support plant start-ups, shutdowns, changeovers and routine operating activities.\n, • Take routine samples and accurately complete production, quality and safety documentation.\n, • Carry out quality checks and escalate any non-conforming products or process deviations.\n, • Maintain accurate operational records and electronic data systems.\n, • Ensure work is carried out in accordance with site procedures and regulatory standards.\n, • Comply with all health, safety and environmental requirements.\n, • Adhere to PPE, COSHH, permit-to-work and risk assessment procedures.\n, • Identify and report hazards, unsafe conditions and near misses.\n, • Support the site's commitment to maintaining a safe and environmentally responsible workplace.\n, • Carry out first-line operational checks and inspections.\n, • Report plant defects, leaks, faults and abnormal operating conditions.\n, • Support maintenance teams by preparing equipment for maintenance activities.\n, • Assist with routine cleaning, housekeeping and line-clearance activities.\n, • Contribute ideas to improve safety, productivity and process efficiency.\n\n Beneficial Skills / Qualifications: \n\n • Strong understanding of health, safety and environmental requirements within manufacturing or industrial environments.\n, • Ability to follow operating procedures, work instructions and safety standards with a high level of accuracy.\n, • Good attention to detail when monitoring plant performance and completing operational records.\n, • Basic IT skills for data entry, production reporting and electronic records.\n, • Flexible approach to shift working and overtime requirements.\n, • Apprenticeship, NVQ, BTEC or equivalent vocational qualification in Process Operations, Manufacturing, Engineering or a Scientific discipline. \n, • Previous experience within chemical manufacturing, process operations, production or a similar industrial environment.\n, • Familiarity with DCS (Distributed Control System) operations.\n, • Experience working within COMAH, ISO, GMP, ATEX or other regulated manufacturing environments.\n, • Forklift Truck Licence.\n, • Knowledge of chemical handling procedures, COSHH and permit-to-work systems.\n\n Additional Details: \n\n • Permanent position\n, • 4 On / 4 Off rotating shift pattern\n, • Average 34.3 hours per week\n, • Bonus\n, • Overtime opportunities available (not guaranteed)\n \n, • Monday to Friday: 1.5x rate\n, • Weekends and Bank Holidays: 2x rate\n \n, • 25 days annual leave plus bank holidays\n, • Additional long-service holiday entitlement awarded every 5 years (up to 5 extra days)\n, • Enhanced pension contribution scheme with employer contributions of up to 10%\n, • Death in Service benefit (3x salary including shift allowance)\n, • Group Income Protection scheme\n

Production Assembler£30,000 - £35,000 + Progression + Training + Benefits + Bonus + Overtime + Early Finish FridayWakefieldCommutable from Huddersfield, Dewsbury, Leeds, CastlefordAre you a Production Assembler or similar looking to join an established company in a period of growth who can provide training and progression opportunities alongside benefits such as a bonus and early finish on Fridays?On offer is the opportunity to join a growing company who design, manufacture and install a variety of specialist equipment into the manufacturing environment.The role will involve assembling prefabricated parts, assuring that parts are usable and following diagrams to meet specifications. You will be working as part of a team and helping out around the workshop, operating or being trained to operate forklifts.This role would suit a Production Assembler who is looking to join an established company who can provide industry and specific training such as forklift driving, progression opportunities as the company grows and a host of great benefits.The Role \n\n • Assembly of parts\n, • Testing of assembled units\n, • Moving parts using forklift\n, • Working as part of the assembly team\n, • Monday to Thursday 8 to 4\n, • Friday 8 to 1:30\n\n The Person \n\n • Production Assembler or similar\n, • Driving Licence\n, • Commutable to Wakefield\n\n For more information please click apply - REFERENCE 5321aelix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions.Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment.Production Assembler | Mechanical Assembler | Mechanical | Forklift | Wakefield | Huddersfield \n INDMP

Workshop Assistant (Manufacturing) \n £25,000 - £30,000 + Overtime OTE 37K + Work Life Balance + Mon-Fri + 31 Days Holiday \n Wakefield \n Are you a Workshop Assistant or similar, looking to join a rapidly growing company, offering a stable role with a fantastic work life balance, working Monday to Friday in a close-knit workshop? \n Are you looking for a long-term, permanent, and local role, with an early finish every Friday, plus optional overtime to increase your earnings? \n In this role you will be carrying out general labour work, consisting of cleaning the workshop, ensuring that the it meets health and safety standards, manual lifting, as well as operating a forklift truck. \n This company has been going for over 15 years and have doubled their annual turnover in the last 2-3 years, they are now looking to do the same again in the next 6 years. They aspire to be the leading provider for specialist equipment, with a brand-new workshop on the way. \n This role would suit a Workshop Assistant looking for a stable, long-term role with a great work life balance, as well as optional overtime to increase their earnings. \n The Role: \n\n • General labour in a modern, clean workshop\n, • Maintaining cleanliness, operating a FLT, and manual lifting\n, • Monday to Thursday, 8am - 4pm, finish at 1:30pm on Friday\n, • Optional overtime, up to 10 hours a week\n\n The Person: \n\n • Workshop Assistant or similar\n, • Full UK driving license\n\n Reference Number: BBBH26690 \n Engineer, Engineering, Manufacturing, Operative, Operator, Forklift, Labourer, Labour, Handling, Lifting, FLT, Work Shop, Workshop, Wakefield, Leeds, Dewsbury, Normanton, Huddersfield \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

They are looking for an experienced Forklift Truck Driver (with an in-date Reach FLT license) to join their team as a Warehouse/FLT Operative. Responsibilities: Forklift truck start up checks & inspections Bailing.

An exciting opportunity has arisen for a Forklift Service Engineer to provide routine and emergency maintenance, service and support in the Yorkshire and Humber region, onsite at customer premises. Is a leading and fast-growing provider of maintenance support, services and hire of state of the art l

Job Description: Know How Resourcing are proud to be representing our manufacturing client who are based in Wakefield to recruit for a Production Manager to lead their manufacturing operations. Please read the job description below and if it is of interest, please apply now. Company Benefits: • Supportive team, • Opportunities for career growth, • Competitive salary, • Generous holiday allowance, • Workplace pension scheme The Role: • Manage the day-to-day operations of the fabrication and manufacturing workshop, ensuring production targets, quality standards and delivery deadlines are achieved., • Plan and schedule production activities to maximise efficiency, machine utilisation and labour resources., • Lead, motivate and develop the production team, promoting high standards of workmanship, accountability and teamwork., • Oversee the operation of CNC fibre laser cutting machine, press brake, welding equipment and general fabrication machinery, • Monitor production performance, identifying bottlenecks and implementing improvements to increase productivity, • Ensure fabricated components are manufactured to engineering drawings, specifications and company quality standards., • Manage material flow throughout the workshop, ensuring raw materials, bought-out items and finished products are available when required., • Work closely with Engineering, Purchasing and Contracts teams to ensure projects progress smoothly, • Ensure compliance with all Health & Safety legislation, PUWER requirements, COSHH requirements and company procedures., • Maintain safe systems of work for all workshop equipment including lifting equipment, forklift trucks and fabrication machinery., • Support recruitment, training, performance management and competency development of workshop personnel., • Prepare production reports, monitor key performance indicators (KPIs) About You • Proven experience as a Production Manager, Manufacturing Manager or Workshop Manager role within a fabrication or engineering environment., • Strong knowledge of sheet metal fabrication, welding and manufacturing processes., • Experience managing CNC fibre laser cutting machines and CNC press brakes., • Ability to read and interpret engineering drawings., • Experience implementing continuous improvement and lean manufacturing principles., • Good understanding of Health & Safety legislation including PUWER, LOLER and COSHH., • Experience managing production planning, resource allocation and manufacturing schedules., • Forklift truck and overhead crane experience would be advantageous

Field Service Engineer (Field/Mobile Mechanic/Vehicle Technician) Wakefield 8am to 4.30pm, Monday to Thursday & Friday 4pm £32,000 - £34,000 Starting Salary Benefits: Paid Door to Door Travel + Overtime at 1.5 and 2.0 + Fully Expensed Van (can be used for personal use) + Annual 5% Bonus (Circa £2700) + Commission + Pension + Excellent Training + 25 Days Holiday + Bank Holidays + Forklift Driver Licence + Call Out Allowance + Broadband Contribution + PPE/Uniform + Uniform Washing Service + Laptop + Phone Field Service Engineer role available in a highly successful manufacturer of forklift trucks. The role will suit those looking to join a employee driven company offering comprehensive training and support. The Field Service Engineer role will be suitable for engineers from any kind of plant, forklifts, HGV, agricultural, cleaning equipment or similar. This is also a great career opportunity for vehicle technicians looking to move into a new industry as the company will fully train. You need to demonstrate mechanical service and repair skills, ideally have engine diagnostic and some basic electrical skills. Part of a team of engineers, you'll be responsible for carrying out service and repairs on a range of forklifts. No stay away or extensive travel is required. Excellent OTE available through overtime and commission. The Field Service Engineer Role in Brief: • Carry out PPM and breakdown on materials handling machinery on a field service engineering basis • Reactive breakdown coverage within the allocated geographical area • Complete comprehensive training to get fully competent on all machinery and equipment • Spares placed in van overnight The Field Service Engineer Person Required: • Plant, forklifts, HGV, agricultural or similar equipment, automotive technicians/motor trade will also be suitable • Ideally hold a level 3 or equivalent in a relevant subject • IT literate

Our client is a well-established and successful manufacturer. They are looking for an experienced Forklift Truck Driver (with an in-date Reach FLT license) to join their team as a Warehouse/FLT Operative. This role is a combination of Fork Lift Truck work and general Warehouse Operative duties (you must be flexible to carry out both). NOTE: This is an ongoing temporary job that is likely to last around 1 month. The length of the contract will be reviewed as it goes along, a permanent opportunity may be possible, but not guaranteed at this stage. PLEASE ONLY APPLY IF YOU MEET THE FOLLOWING REQUIREMENTS: • You have an in-date Reach FLT Licence, not in-house, it must be your own license, • You are happy to work both Day and Night shifts as shown below, • You are immediately available, • You have previous experience of working in a Manufacturing / Production / Factory / Logistics / Dispatch environment as an FLT Operator Salary: £16.14 per hour (this is inclusive of the shift allowance) + Overtime (if available) Shift pattern, Days and Nights: • Week 1: Wednesday, Thursday, Friday, (day shift) 7am to 7pm (36 hours), • Week 2: Monday, Tuesday, (night shift) 7pm to 7am (24 hours), • Week 3: Monday, Tuesday, (day shift) 7am to 7pm, then Wednesday, Thursday, Friday, (nights) 7pm to 7am (60 hours), • Back to week 1. Responsibilities: • Forklift truck start up checks & inspections, • Bailing, • Booking in & out, • Loading trailers and trailer checks, • Robot stretch wrap & top sheet replacement, • Hand stacking, • Waste, • Cleaning, • Pick jobs, • Deliveries, • Picking ingredients, • Check / driver paperwork

Job Description: Warehouse Team Member Location: Batley Salary: £12.71 Hours: 36 hours per week Contract: Permanent, Full-Time Recruiting on behalf of a respected national not-for-profit organisation Are you looking for a rewarding role where your work contributes to meaningful impact? THH Recruitment is proud to be recruiting for a Warehouse Team Member in Batley on behalf of a well-respected national not-for-profit organisation. This is your opportunity to join a mission-led team that’s helping drive commercial growth to support charitable objectives. About the Role Working across all warehouse operations, you’ll play a key part in supporting daily activities that ensure the smooth running of a large and busy distribution centre. From stock sorting to dispatch, picking and packing to online inventory, this is a varied and hands-on position where no two days are the same. You'll be part of a hardworking and inclusive team, helping to meet key performance indicators (KPIs) while delivering excellent internal service. Key Responsibilities • Support all areas of warehouse operations as needed, • Move stock by hand, lift, or forklift truck (if licensed), • Assist with sorting, picking, packing, and dispatching of stock, • Help with online sales processing and inventory tasks, • Maintain good housekeeping standards, • Comply with all health and safety regulations and procedures, • Contribute to a supportive and inclusive team culture About You We’re looking for someone adaptable, reliable, and team-focused. You will also: • Have good communication and time management skills, • Be self-aware and open to feedback, • Be willing to work flexibly in line with business needs, • Be able to manage workload and priorities with support, • Have a basic understanding of Health & Safety, • Have some basic IT skills Desirable (but not essential): • Experience in a warehouse or e-commerce environment, • Experience operating forklift trucks Why Join? • Be part of an organisation committed to inclusivity, empowerment, and accountability, • Contribute to a wider mission of social good, • Enjoy flexibility in your working arrangements (e.g. homeworking, job share options), • Join a friendly and purpose-driven workplace

Workshop Assistant (Manual Handling) £25,000 - £30,000 + Work Life Balance + Mon-Fri + Early Finish Friday + 31 Days Holiday Wakefield Are you a Workshop Assistant looking for a stable and secure role with a company that is growing exponentially each year, with an excellent work-life balance, working Monday to Friday, within a friendly working environment? Are you looking for a long-term, permanent, and local role, with an early finish every Friday, plus optional overtime to increase your earnings? In this role you will be carrying out general labour work, consisting of cleaning the workshop, ensuring that it meets health and safety standards, manual lifting, as well as operating a forklift truck. This company has been going for over 15 years and have doubled their annual turnover in the last 2-3 years; they are now looking to do the same again in the next 6 years. They aspire to be the leading provider for specialist equipment, with a brand-new workshop on the way. This role would suit a Workshop Labourer looking for a stable, long-term role with a great work life balance, as well as optional overtime to increase their earnings. The Role: General labour in a modern, clean workshop Maintaining cleanliness, operating a FLT, and manual lifting Monday to Thursday, 8am - 4pm, finish at 1:30pm on Friday Optional overtime, up to 10 hours a weekThe Person: Workshop Assistant or similar Full UK driving licenseReference Number: BBBH26690b Engineer, Engineering, Manufacturing, Operative, Operator, Forklift, Labourer, Labour, Handling, Lifting, FLT, Work Shop, Workshop, Wakefield, Leeds, Dewsbury, Normanton, Huddersfield If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Yard Operative / FLT Driver Wakefield Full-Time | Permanent Monday to Friday Orchard Professional Solutions are recruiting on behalf of our client for an experienced Yard Operative / FLT Driver to join their busy operation in the Wakefield area. This is a key role within the business, responsible for supporting the smooth day-to-day running of the yard while maintaining high standards of safety, housekeeping and quality. Key Responsibilities • Coordinate and control vehicle loading and unloading activities., • Operate a Forklift Truck safely and efficiently., • Support general FLT and yard operations., • Oversee the day-to-day organisation of the yard., • Maintain excellent housekeeping standards across the site., • Carry out quality checks where required., • Ensure materials are stored correctly and safely., • Work closely with the warehouse and production teams to ensure efficient operations. Requirements • Valid Counterbalance FLT Licence (essential)., • Previous experience working within a busy yard or warehouse environment., • Strong organisational skills and attention to detail., • A proactive and reliable approach to work., • Good understanding of health and safety procedures., • Ability to work independently and as part of a team. What’s on Offer • Full-time permanent position., • Monday to Friday working pattern., • Stable, long-term employment., • Supportive working environment., • Opportunity to develop within a growing business. If you’re an experienced Yard Operative / FLT Driver looking for your next permanent opportunity in the Wakefieldarea, we’d love to hear from you. Apply today by sending your CV or contact Andrew at Orchard Professional Solutions for more information

Assembly Operative Wakefield, WF2 £35,000 Per Annum plus benefits Monday to Thursday, 08:00am to 16:00pm with a 30 Minute lunch. Friday 08:00am 13:30pm. Concept Recruitment are delighted to be working with our Wakefield based client to recruit an experienced Assembly Operative on a full-time permanent basis. You will be joining a busy manufacturing company, playing a key part in the varied working day which will be a combination of technical assembly, equipment operation, and logistical support. Key Responsibilities: ·Assemble and test dust control filters and related systems to required specifications ·Delivering to customers and collecting from suppliers with eligibility to drive the company’s 3.5 tonne curtain sider and flat back vans ·Operate forklift trucks and overhead cranes safely and efficiently ·Always maintain compliance with health and safety procedures ·Collaborate effectively with colleagues and contribute to team success ·Take initiative and responsibility for your work, promoting continuous improvement in processes and systems ·Goods Management Required Qualifications and Experience: ·Full UK driving licence ·Forklift truck and overhead crane operation experience (certifications advantageous.) ·Proven ability to work independently and as part of a team ·Strong commitment to health and safety practices ·Enthusiasm for identifying ways to improve productivity and efficiency Our client is offering: ·A supportive, collaborative shop floor environment ·Opportunities for professional growth and career advancement within a growing organisation ·Competitive salary If you are an experienced Assembly Operative and looking for your next move, click “Apply” now and a member of the team will be in touch. Concept Recruitment are acting as a Recruitment Agency in relation to this role

Novara People are recruiting for an FLT Driver / Laminate Picker to join a well-established and busy distribution business based in Tingley, WF3. Our client is a major supplier of timber, panels, laminates and decorative surface products, supplying customers across the construction, manufacturing and interiors industries. This is a hybrid role combining FLT driving with order picking, so we're looking for someone who is happy to be hands-on rather than spending the full shift on a forklift. Due to the large product range, there is a 3–6 month training period on the day shift before moving permanently onto nights. You'll be trained on the different products, picking processes, locations and systems to ensure you're fully confident before moving onto the night shift. Pay rise when taken perm. Duties Picking laminate products accurately against customer orders Operating an FLT to move and locate stock Picking products both manually and using the FLT Locating the correct products within a large and varied stock range Checking product codes, quantities and specifications carefully Preparing orders ready for dispatch Loading and unloading stock where required Using warehouse systems and paperwork to process orders Handling large and potentially heavy products safely Checking products for damage before dispatch Maintaining accurate stock locations Working at a good pace while maintaining accuracy Keeping the warehouse clean, organised and safe Following all site health & safety procedures You must be available to work the day shift for the first 3–6 months while completing your training. Once fully trained, you will move onto the permanent Sunday to Thursday, 9:30pm – 6:00am night shift, with an increase in pay. Skills: Previous FLT experience is required Previous picking or warehouse experience Comfortable working in a hybrid FLT and manual picking role Good attention to detail – there is a large product range to learn Confident reading product codes, pick sheets and order information Comfortable with manual handling Reliable and able to work independently Good communication skills Willing to complete 3–6 months of training on the day shift Must be able to permanently work Sunday to Thursday nights once training is

Manufacturing Operative – Rotating Day and Night Shifts Location: Ossett, West Yorkshire Pay: £15.24 per hour Job Type: Temporary Shift Pattern: Monday and Tuesday days, followed by Thursday and Friday nights Shift Hours: 12-hour shifts, 6:00am–6:00pm and 6:00pm–6:00am Manufacturing Operatives Wanted Aqumen Recruitment is recruiting Manufacturing Operatives on behalf of a well-established food ingredients manufacturer based in Ossett. This is an excellent opportunity to join a busy and supportive production environment, manufacturing and packing high-quality food ingredient products to clearly defined specifications. The role is hands-on and fast-paced, with a strong focus on safety, hygiene, quality and teamwork. You must be able to commit to the rotating 12-hour shift pattern and be willing to work across different areas of the production department when required. Full training will be provided where appropriate. Shift Pattern The rotating shift pattern consists of: Monday and Tuesday: day shifts, 6:00am–6:00pm Thursday and Friday: night shifts, 6:00pm–6:00am £15.24 per hour Key Responsibilities As a Manufacturing Operative, you will: Manufacture and pack food ingredient products in line with written specifications. Set up, operate and monitor production lines, machinery and associated equipment. Follow Good Manufacturing Practice, HACCP, hygiene, quality and product-protection procedures. Check that raw materials are approved and suitable for use. Weigh, label, handle and store ingredients and materials correctly. Complete production, quality and traceability records accurately. Monitor production rates and report delays, faults or quality issues promptly. Maintain a clean, safe and hygienic working environment. Support production output, efficiency, quality and waste-reduction targets. Complete clear and effective handovers between shifts. Assist with stock counts and other operational duties when required. Operate equipment safely, including forklift trucks where trained and authorised. Attend any training required to maintain compliance and improve performance. About You The successful candidate will be: Reliable, punctual and committed to the agreed shift pattern. Comfortable working rotating 12-hour day and night shifts. Able to work effectively in a fast-paced manufacturing environment. Focused on safety, food quality, hygiene and accurate record-keeping. Able to follow written procedures and production specifications. A strong team player with good communication skills. Flexible and willing to work across different production areas. Confident using machinery after receiving appropriate training. Motivated to achieve production targets while maintaining high standards. Previous experience in manufacturing, food production, warehousing or machine operation would be beneficial, although training may be provided for suitable candidates. Why Apply Through Aqumen Recruitment? Aqumen Recruitment provides a professional and supportive recruitment experience, including clear information about the role, shift pattern and application process, as well as ongoing support throughout your assignment. Apply Today Applicants must be able to commit to the rotating day and night shift pattern before applying. Aqumen Recruitment is acting as an employment business in relation to this vacancy

Production Assembler £30,000 - £35,000 + Progression + Training + Benefits + Bonus + Overtime + Early Finish Friday Wakefield Commutable from Huddersfield, Dewsbury, Leeds, Castleford Are you a Production Assembler or similar looking to join an established company in a period of growth who can provide training and progression opportunities alongside benefits such as a bonus and early finish on Fridays? On offer is the opportunity to join a growing company who design, manufacture and install a variety of specialist equipment into the manufacturing environment. The role will involve assembling prefabricated parts, assuring that parts are usable and following diagrams to meet specifications. You will be working as part of a team and helping out around the workshop, operating or being trained to operate forklifts. This role would suit a Production Assembler who is looking to join an established company who can provide industry and specific training such as forklift driving, progression opportunities as the company grows and a host of great benefits. The Role Assembly of parts Testing of assembled units Moving parts using forklift Working as part of the assembly team Monday to Thursday 8 to 4 Friday 8 to 1:30The Person Production Assembler or similar Driving Licence Commutable to WakefieldFor more information please click apply - REFERENCE 5321a elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Production Assembler | Mechanical Assembler | Assembly | Production | Assembly | Mechanical | Forklift | Wakefield | Huddersfield | Dewsbury | Leeds | Castleford

A great opportunity has arisen for a Process Operator to join a leading manufacturing company Key Responsibilities: Operate, monitor and control chemical processing equipment, including vessels, pumps, valves, mixers, filling lines and associated plant systems. Follow standard operating procedures, batch instructions and production schedules to manufacture products safely and consistently. Monitor process variables including temperature, pressure, flow rates, levels and reaction times, making adjustments where authorised. Handle, transfer, weigh, mix and charge raw materials, intermediates and finished products in line with site procedures. Support plant start-ups, shutdowns, changeovers and routine operating activities. Take routine samples and accurately complete production, quality and safety documentation. Carry out quality checks and escalate any non-conforming products or process deviations. Maintain accurate operational records and electronic data systems. Ensure work is carried out in accordance with site procedures and regulatory standards. Comply with all health, safety and environmental requirements. Adhere to PPE, COSHH, permit-to-work and risk assessment procedures. Identify and report hazards, unsafe conditions and near misses. Support the site's commitment to maintaining a safe and environmentally responsible workplace. Carry out first-line operational checks and inspections. Report plant defects, leaks, faults and abnormal operating conditions. Support maintenance teams by preparing equipment for maintenance activities. Assist with routine cleaning, housekeeping and line-clearance activities. Contribute ideas to improve safety, productivity and process efficiency.Beneficial Skills / Qualifications: Strong understanding of health, safety and environmental requirements within manufacturing or industrial environments. Ability to follow operating procedures, work instructions and safety standards with a high level of accuracy. Good attention to detail when monitoring plant performance and completing operational records. Basic IT skills for data entry, production reporting and electronic records. Flexible approach to shift working and overtime requirements. Apprenticeship, NVQ, BTEC or equivalent vocational qualification in Process Operations, Manufacturing, Engineering or a Scientific discipline. Previous experience within chemical manufacturing, process operations, production or a similar industrial environment. Familiarity with DCS (Distributed Control System) operations. Experience working within COMAH, ISO, GMP, ATEX or other regulated manufacturing environments. Forklift Truck Licence. Knowledge of chemical handling procedures, COSHH and permit-to-work systems.Additional Details: Permanent position 4 On / 4 Off rotating shift pattern Average 34.3 hours per week Bonus Overtime opportunities available (not guaranteed) Monday to Friday: 1.5x rate Weekends and Bank Holidays: 2x rate 25 days annual leave plus bank holidays Additional long-service holiday entitlement awarded every 5 years (up to 5 extra days) Enhanced pension contribution scheme with employer contributions of up to 10% Death in Service benefit (3x salary including shift allowance) Group Income Protection scheme

Role: Mobile Forklift Engineer Location: Field Role covering the Wakefield areas. Salary: Up to £45,000+ OTE (including Van, Door-to-Door Pay, Enhanced Overtime Rates & Plenty of Overtime Available) We are looking for a Mobile Forklift Engineer to join a supportive team covering the Wakefield area. This is an excellent opportunity for an engineer looking to develop their skills, earn a strong package, and be part of a company that truly values its people. What’s on Offer: Achievable £45K+ OTE Company van & fuel card Door-to-door pay Enhanced overtime rates with plenty of overtime available Full training Supportive team environment where you’ll be valuedThe Role: Service, repair, and maintain a variety of forklift trucks and associated equipment Carry out diagnostics and fault-finding Deliver high-quality customer service while working independently in the fieldWhat We’re Looking For: Engineering background in Plant, Agricultural, HGV, Forklift, or Automotive Ideally a Level 3 NVQ or equivalent qualification Strong problem-solving skills and the ability to work independently A positive, can-do attitude and willingness to learnThis is a fantastic opportunity to step into a rewarding role with excellent earning potential, ongoing training, and real career stability. How to Apply: If you’re an experienced engineer ready to take the next step with a well-established company apply now. Alternatively, call Pete at Holt Recruitment on (phone number removed) (url removed) Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. Specialising in Plant, Agricultural, Powered Access, Forklift, Lift & Access, Static plant We recruit across the UK for Mobile Plant Engineer, Mobile Plant Fitter, Plant Engineer, Plant Fitter, Agricultural Engineer, Agricultural Mechanic, Powered Access Engineer, Forklift Engineer, MHE Engineer, Generator Engineer

Production Manager Wakefield, WF2 £52,000 Per Annum plus benefits Monday to Thursday, 08:00am to 16:00pm with a 30 Minute lunch. Friday 08:00am 13:30pm. Concept Recruitment are delighted to be working with our Wakefield based client to recruit an experienced Production Manager on a full-time permanent basis. Key Responsibilities include but not limited to: ·Manage the day-to-day operations of the fabrication and manufacturing workshop, ensuring production targets, quality standards and delivery deadlines are achieved. ·Plan and schedule production activities to maximise efficiency, machine utilisation and labour resources. ·Lead, motivate and develop the production team, promoting high standards of workmanship, accountability and teamwork. ·Oversee the operation of CNC fibre laser cutting machine, press brake, welding equipment and general fabrication machinery, ensuring they are operated safely and efficiently whilst also operating the laser, press brake and fabrication equipment alongside other operatives whilst the production facility grows and develops. ·Ensure all machinery is correctly maintained, serviced and calibrated, coordinating preventative maintenance to minimise downtime. ·Monitor production performance, identifying bottlenecks and implementing improvements to increase productivity, reduce waste and improve quality. ·Ensure fabricated components are manufactured to engineering drawings, specifications and company quality standards. ·Manage material flow throughout the workshop, ensuring raw materials, bought-out items and finished products are available when required. ·Work closely with Engineering, Purchasing and Contracts teams to ensure projects progress smoothly from design through manufacture to installation. ·Develop and improve workshop processes, layouts and manufacturing methods to support business growth. ·Ensure compliance with all Health & Safety legislation, PUWER requirements, COSHH requirements and company procedures. ·Prepare production reports, monitor key performance indicators (KPIs) and report manufacturing performance to senior management. ·Drive a culture of continuous improvement using Lean manufacturing principles where appropriate. Required Qualifications and Experience ·Proven experience as a Production Manager, Manufacturing Manager or Workshop Manager role within a fabrication or engineering environment. ·Strong knowledge of sheet metal fabrication, welding and manufacturing processes. ·Experience managing CNC fibre laser cutting machines and CNC press brakes. ·Ability to read and interpret engineering drawings. ·Strong leadership, planning and organisational skills. ·Good understanding of Health & Safety legislation including PUWER, LOLER and COSHH. ·Experience managing production planning, resource allocation and manufacturing schedules. ·Forklift truck and overhead crane experience would be advantageous. ·Excellent communication and problem-solving skills. If you are an experienced Production Manager and looking for your next move, click “Apply” now and a member of the team will be in touch. Concept Recruitment are acting as a Recruitment Agency in relation to this role